| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A78013-27 | D Ring | 1 | |
| HU55280-2-14 | D RING | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| J32001-68 | MEASURING EQUIPMENT - BRAKE PEDAL | 8 | |
| 2024476-1 | BEARING AND RETAINER SUPPORT | 1 | |
| SPL-12396 | ROD END BEARING SOCKET WRENCH | 1 | |
| (CALIB) 11722A | Measuring Sensor Module (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 20514MI-2 | CONTROL PANEL STEADY MONITORING HYBRIDE | 1 | |
| (CALIB) 343A1-6KN1 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A100KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A10KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A160KN1 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A160KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A16KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A1MN3 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A250KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A25KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A400KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A40KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A4KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A6-3KN1 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A6.3KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A63KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343AG31MN | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460005832 | SPRING SPRING EXPANDER-MLG SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007170 | EXPANDER EXPANDER-SPRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007328 | EXPANDER EXPANDER - SPRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4900002000002 | Measuring device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 518MC | Measuring device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 53808332 | Power measuring device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6000133343 | MEASURING EQUIPMENT - BRAKE PEDAL(SINGLE PEDAL) (CALIBRATION) | 1 | |
| (CALIB) 6799622 | PULLER, REAR TURBINE BEARING AND SEAL (CALIBRATION) | 1 | |
| (CALIB) 856A2946 | RING-PROTECTIVE FAN DISK (CALIBRATION) | 1 | |
| (CALIB) 97L57508828000 | TOOL DRILL TOOL-FLAP FAIRING DRIVE B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97L57508828001 | TOOL DRILL TOOL-FLAP FAIRING DRIVE T (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27203250002 | MEASURNG MEASURING EQUIPMENT - RUDDER PE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27207507001 | EXTRACTR EXTRACTOR-RUDDER BEARINGS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27208423000 | Extractor Rudder Bearings (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27303502000 | EQUIPMT MEASURING EQUIPMENT T.H.S DEFLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27808005000 | DEVICE MEASURING DEVICE - SLAT TRAILIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27903501001 | MEASURNG MEASURING EQUIPMENT - PITCH AND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52307590000 | DEVICE SETTING DEVICE - SPRING UNIT, C (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A53003010000 | RULE MEASURING RULE-ONBOARD ROD CENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003083000 | REBORING REBORING,TOOL-WING AND PYLON FI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003083002 | REBORING REBORING TOOL-WING AND PYLON FI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003083003 | REBORING TOOL-WING AND PYLON FI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003094000 | TOOL CHAMFERING TOOL-WING AND PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203003042 | SHORING SHORING ASSY BETWEEN FR.24 AND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07209001000 | CRADLE THS SHORING CRADLE - SA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27203000001 | MEASURING EQUIPMENT-RUDDER PEDAL OPERATING LOAD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27208657000 | DEVICE - FREEPLAY, RUDDER BEARING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004003001 | SOCKET, FWD PINTLE BEARING (CALIBRATION) | 1 | |
| (CALIB) 98D57004038000 | FIXTURE FIXTURE BORING-CARDEN FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503010000 | REBORING REBORING TOOL - WING AND PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004044000 | TOOL-BORING, CARDAN FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07209001000 | ADAPTER – SHORING THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508444000 | HOIST HOIST-R I,MID FAIRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004013000 | KIT KIT-BORING AND CHAMFERING-UPPER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004025000 | KIT KIT-UPPR CARDAN BORING AND CHAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S10205000004 | GROUND MOORING KIT | 1 | |
| (CALIB) 98S27008501002 | RUDDER SPRING TAB JIG | 1 | |
| (CALIB) 98S27008501003 | RUDDER SPRING TAB JIG | 1 | |
| (CALIB) 98S53305004000 | SKIN STRINGER CALIBRATION STANDARD-9635A3 | 1 | |
| (CALIB) 98S53305005000 | SKIN STRINGER CALIBRATION STANDARD-9635A4 | 1 | |
| (CALIB) 98S57105016200 | TESTING GUIDE FOR EC INSP ON STRINGER TOP | 1 | |
| (CALIB) 99A32401001000 | EQUIPMEN EQUIPMENT-MEASURING,BRAKE PEDAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A11126 | TOOL TOOL -HOLDING, STEERING ACTUATO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AO42795 | MANDREL FOR BEARING ASSY (CALIBRATION) | 1 | |
| (CALIB) DMC899-2 | MAINTENANCE KIT For Electrical Connectors and Wiring Systems | 1 | |
| (CALIB) DRT68006 | SPRING SPRING-EXPANDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FDIX 50 | DEC GAUGE - FORCE, PUSH/PULL/SPRING SCALE (CALIBRATION) | 2 | |
| (CALIB) GSE55904 | KIT KIT-LOWER BEARING, R I, BLG AND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55934 | EXPANDER EXPANDER, SPRING - BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32001-64 | Measuring EQPT, Brake Pedal (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32001-67 | Measuring EQPT, Brake Pedal (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) J32001-68 | Measuring EQPT, Brake Pedal (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RCWSP4Z01 | WINDSHIELD RAPID CURING SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T792994004000000H | Nose wheel steering angle measurement device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T792995001000000H | Angle measuring device set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TM2300G001 | CONTROL AND MONITORING HARNESS CONDITIONING (CALIBRATION) | 1 | |
| 0-62772-2 | BEARING DRIFT | 1 | |
| 000850 | SPRING LOAD TESTER 136KG (300LB) | 1 | |
| 00166-156-000 | SPRING-LOADED SWIVEL CASTOR | 1 | |
| 00166-230-000 | HYDRO TOWBAR TOWMULTI-3, SPRING-LOADED SWIVEL CASTOR | 1 | |
| 001SP9000 | PIN PIN-STEERING DISCONNECT | 7 | |
| 001U274A02-SET | AILERON RINGING BOARD | 1 | |
| 001U515A0700000 | Tool Kit No. 7, Rudder Upper Bearing Exchange | 1 | |
| 00202035 | ADAPTER NOSE WHEEL STEERING | 1 | |
| 002A0003-120 | TOP KIT FUSELAGE AFT WING BODY FAIRING | 2 | |
| 00304-134-00 | GROOVED RING | 1 | |
| 00304-134-000 | GROOVED RING | 1 | |
| 00314-022-000 | PISTON GUIDE RING | 1 | |
| 00316-042-000 | TURCON GLYD RING | 1 | |
| 00316-043-000 | TURCON GLYD RING | 1 | |
| 008820001 | 882-BIT HOLDER RETAINING RING FOR DRIVER (BETA) | 1 | |
| 01-1001-10 | ANALYZER - DATABUS, ARINC 429 (SPECIFY 110V OR 220V WHEN ORDERING) | 1 | |
| 01-1001-12 | TESTER ARINC 429 (SPECIFY 110V220V WHEN ORDERING) | 5 | |
| 01-1204-0010 | TOWBAR - AIRPLANE, TOWING AND STEERING | 3 | |
| 01-1207-0010 | TOWBAR - AIRPLANE, TOWING AND STEERING | 3 | |
| 01-1246-0010 | TOWBAR - AIRPLANE, TOWING AND STEERING | 3 | |
| 01-1340-0100 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| 010701-1 | BASE - TRANSPORTATION , CFM56 ENGINE (AIRLINE CONFIGURATION) (ADVANCED GROUND SYSTEMS ENGINEERING CORP (AGSE)) | 1 | |
| 01472 | SEAL KIT FOR J-AXLE12HPA (CONTAINING: SPRING, VALVE AND BALL) | 1 | |
| 015U1845-1 | TOPKIT - FUEL BOOST PUMP WIRING CHANGE (VALIDATION KIT) | 1 | |
| 017013 | HAND BEARING COMPASS HPK67 | 1 | |
| 01190008 | 440.8-1/4DR x 8mm CROW RING SPANNER | 1 | |
| 01190009 | 440.9-1/4DR x 9mm CROW RING SPANNER | 1 | |
| 01190010 | 440.10-1/4DR x 10mm CROW RING SPANNER | 1 | |
| 01190011 | 440.11-1/4DR x 11mm CROW RING SPANNER | 1 | |
| 01190012 | 440.12-1/4DR x 12mm CROW RING SPANNER | 1 | |
| 01190013 | 440.13-1/4DR x 13mm CROW RING SPANNER | 1 | |
| 01190014 | 440.14-1/4DR x 14mm CROW RING SPANNER | 1 | |
| 01211010 | 440SMJ.10-CROW-RING SPANNER,SPEC MOD. | 1 | |
| 01211014 | 440SMJ.14-CROW-RING SPANNER SPEC MOD. | 1 | |
| 01490024 | 440.A.3/8-1/4DR x 3/8"AF CROW RING | 1 | |
| 01490028 | 440.A.7/16-1/4DR x 7/16"AF CROW RING | 1 | |
| 01490032 | 440.A.1/2-1/4DR x 1/2"AF CROW RING | 1 | |
| 01490034 | 440.A.9/16-1/4DR x 9/16"AF CROW RING | 1 | |
| 0164851150 | HP PUMP METERING VALVE ADJUSTED | 2 | |
| 0164851170 | HP PUMP METERING VALVE ADJUSTED | 1 | |
| 01F54AG000100 | CRADLE-AFT PYLON FAIRING REPLACED BY APV5410-00-0G | 1 | |
| 02-0544C0110 | TRONAIRÃÂî 02-0544C0110 TRIPOD HYDRAULIC JACK WITH SPRING LOADED CASTERS, 5 TON/4.5 METRIC TON | 4 | |
| 02-109 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) | 1 | |
| 02-109-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) | 1 | |
| 02-125 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-125-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-156 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-156-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-187 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 2 | |
| 02-187-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-218 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-218-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-250 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-250-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-281 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-281-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-312 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-312-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-343 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-343-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-375 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-375-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-406 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-406-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-612-3C-100 | USATCO DEBURRING AND DENT DRILL | 1 | |
| 02-938 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-938-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-MA-2.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) | 1 | |
| 02-MA-2.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) | 1 | |
| 02-MA-2.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-2.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-5.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-5.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-5.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-5.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02010N7 | OÕ RING SIZE 010 70 DURO MITRILLE | 1 | |
| 02011N7 | OÕ RING SIZE 011 70 DURO | 1 | |
| 0209 | SNAP RING, INSTALLATION/REMOVAL, 90 DEGREE PLIERS | 1 | |
| 02190015 | 440.15-3/8DR x 15mm CROW RING SPANNER | 1 | |
| 02190016 | 440.16-3/8DR x 16mm CROW RING SPANNER | 1 | |
| 02190017 | 440.17-3/8DR x 17mm CROW RING SPANNER | 1 | |
| 02190018 | 440.18-3/8DR x 18mm CROW RING SPANNER | 1 | |
| 02190019 | 440.19-3/8DR x 19mm CROW RING SPANNER | 1 | |
| 02190020 | 440.20-3/8DR x 20mm CROW RING SPANNER | 1 | |
| 02190021 | 440.21-3/8DR x 21mm CROW RING SPANNER | 1 | |
| 02190022 | 440.22-3/8DR x 22mm CROW RING SPANNER | 1 | |
| 02190023 | 440.23-3/8DR x 23mm CROW RING SPANNER | 1 | |
| 02190024 | 440.24-3/8DR x 24mm CROW RING SPANNER | 1 | |
| 02190025 | 440.25-3/8DR x 25mm CROW RING SPANNER | 1 | |
| 02190026 | 440.26-3/8DR x 26mm CROW RING SPANNER | 1 | |
| 02190027 | 440.27-3/8DR x 27mm CROW RING SPANNER | 1 | |
| 02191027 | 440.27MB-CROW-RING-SPANNER 27MB 3/8 D | 1 | |
| 02211016 | 440SMJ.16-CROW-RING SPANNER SPEC MOD. | 1 | |
| 02211018 | 440SMJ.18-CROW-RING SPANNER SPEC MOD. | 1 | |
| 02211020 | 440SMJ.20-CROW-RING SPANNER SPEC MOD. | 1 | |
| 02211022 | 440SMJ.22-CROW-RING SPANNER SPEC MOD. | 1 | |
| 02211024 | 440SMJ.24-CROW-RING SPANNER SPEC MOD. | 1 | |
| 02211027 | 440SMJ.27-CROW-RING SPANNER SPEC MOD. | 1 | |
| 02211030 | 440SMJ.30-CROW-RING SPANNER SPEC MOD. | 1 | |
| 02490036 | 440.A.5/8-3/8DR x 5/8"AF CROW-RING | 1 | |
| 02490038 | 440.A.11/16-3/8DR x 11/16"AF CROW-RING | 1 | |
| 02490040 | 440.A.3/4-3/8DR x 3/4"AF CROW-RING | 1 | |
| 02490042 | 440.A.13/16-3/8DR x 13/16"AF CROW-RING | 1 | |
| 02490044 | 440.A.7/8-3/8DR x 7/8"AF CROW-RING | 1 | |
| 02490046 | 440.A.15/16-3/8DR x 15/16"AF CROW-RING | 1 | |
| 02490048 | 440.A.1-3/8DR x 1"AF CROW-RING | 1 | |
| 02490050 | 440.A.1.1/16-3/8DR x 1.1/16"AF CROW-RING | 1 | |
| 03190028 | 440.28 - 1/2DR x 28mm CROW-RING SPANNER | 1 | |
| 03190030 | 440.30 - 1/2DR x30mm CROW-RING SPANNER | 1 | |
| 03190032 | 440.32 - 1/2DR x 32mm CROW-RING SPANNER | 1 | |
| 03190034 | 440.34 - 1/2DR x 34mm CROW-RING SPANNER | 1 | |
| 03190036 | 440.36 - 1/2DR x 36mm CROW-RING SPANNER | 1 | |
| 03190038 | 440.38 - 1/2DR x 38mm CROW-RING SPANNER | 1 | |
| 03190040 | 440.40 - 1/2DR x 40mm CROW-RING SPANNER | 1 | |
| 03190041 | 440.41 - 1/2DR x 41mm CROW-RING SPANNER | 1 | |
| 03190042 | 440.42 - 1/2DR x 42mm CROW-RING SPANNER | 1 | |
| 03190046 | 440.46 - 1/2DR x 46mm CROW-RING SPANNER | 1 | |
| 03190050 | 440.50 - 1/2DR x 50mm CROW-RING SPANNER | 1 | |
| 03490052 | 440.A.1.1/8-1/2DR x 1.1/8"AF CROW-RING | 1 | |
| 03490056 | 440.A.1.1/4-1/2DR x 1.1/4"AF CROW-RING | 1 | |
| 03490058 | 440.A.1.5/16-1/2DR x 1.5/16"AF CROW-RING | 1 | |
| 03490060 | 440.A.1.3/8-1/2DR x 1.3/8"AF CROW-RING | 1 | |
| 03490062 | 440.A.1.7/16-1/2DR x 1.7/16"AF CROW-RING | 1 | |
| 03490064 | 440.A.1.1/2-1/2DR x 1.1/2"AF CROW-RING | 1 | |
| 03490065 | 440.A.1.9/16-1/2DR x 1.9/16"AF CROW-RING | 1 | |
| 03490066 | 440.A.1.5/8-1/2DR x 1.5/8"AF CROW-RING | 1 | |
| 03490068 | 440.A.1.3/4-1/2DR x 1.3/4"AF CROW-RING | 1 | |
| 03490069 | 440.A.1.13/16-1/2DR x 1.13/16"AF CROW-RING | 1 | |
| 03490072 | 440.A.2-1/2DR x 2"AF CROW-RING | 1 | |
| 03490076 | 440.A.2.1/4-1/2DR x 2.1/4"AF CROW-RING | 1 | |
| 03490077 | 440.A.2.5/16-1/2DR x 2.5/16"AF CROW-RING | 1 | |
| 03490078 | 440.A.2.3/8-1/2DR x 2.3/8"AF CROW -RING | 1 | |
| 04053018 | SPRING OUTSIDE CALIPER TESTER | 1 | |
| 0235297040 | FORWARD RING SUPPORT | 1 | |
| 0260600990 | DOWEL CENTERING | 1 | |
| 0268170160 | PUMP BODY-INT BEARING | 1 | |
| 0268700650 | DOUBLE BEARING CAGE | 1 | |
| 0292510120 | discorager gasket, aft bearing flowpath | 1 | |
| 0292697620 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0292697630 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0292697640 | CONTROL AND MONITORING HARNESS | 1 | |
| 0292697650 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0292697660 | CONTROL AND MONITORING HARNESS | 1 | |
| 0292697690 | CONTROL AND MONITORING HARNESS | 1 | |
| 0292697770 | CONTROL AND MONITORING HARNESS | 1 | |
| 0292697850 | P100 CONTROL AND MONITORING HARNESS | 1 | |
| 0292697870 | P100 CONTROL AND MONITORING HARNESS | 1 | |
| 0292858430 | PUMP AND METERING VALVE ASSY,ADJUSTED | 1 | |
| 0292861060 | PUMP AND METERING VALVE ASSY,ADJUSTED | 1 | |
| 0292861920 | PUMP AND METERING VALVE ADJUSTED ASSY | 1 | |
| 0292861940 | PUMP AND METERING VALVE ASSY, ADJUSTED | 1 | |
| 0292862200 | PUMP AND METERING VALVE ADJUSTED | 1 | |
| 0292862590 | PUMP AND METERING VALVE ASSY, ADJUSTED | 1 | |
| 0292862600 | PUMP AND METERING VALVE ASSY, ADJUSTED | 1 | |
| 0292862610 | PUMP AND METERING VALVE ASSY, ADJUSTED | 1 | |
| 0292862620 | PUMP AND METERING VALVE ASSY, ADJUSTED | 2 | |
| 0292862640 | PUMP AND METERING VALVE ASSY, ADJUSTED | 1 | |
| 0292862650 | PUMP AND METERING VALVE ASSY, ADJUSTED | 1 | |
| 0292862820 | PUMP AND METERING VALVE ADJUSTED ASSY | 1 | |
| 0292862880 | PUMP AND METERING VALVE ADJUSTED ASSY | 1 | |
| 0292862890 | PUMP AND METERING VALVE ADJUSTED ASSY | 2 | |
| 0292862930 | HP LP PUMP METERING VALVE ADJUSTED | 1 | |
| 0292868120 | PUMP AND METERING VALVE ASSY,ADJUSTED | 1 | |
| 0298180490 | DOWEL CENTERING | 1 | |
| 0298530030 | BEARING BODY ASSY | 1 | |
| 0298537240 | BODY ASSY,BEARING | 1 | |
| 0298737690 | PIPE,DRAINAGE,HP-METERING VALVE | 1 | |
| 0298757640 | CONTROL AND MONITORING HARNESS | 1 | |
| 0298757740 | P100 CONTROL AND MONITORING HARNESS | 1 | |
| 0298918070 | HP PUMP AND METERING VALVE ASSY,ADJUSTED | 1 | |
| 02ACA571 | Mitutoyo 02ACA571 Auxiliary Spindle Spring (25.4mm/1") | 1 | |
| 02ACA773 | Mitutoyo 02ACA773 Auxiliary Spindle Spring (50.8mm/2") | 1 | |
| 02C1036C0111 | 10 Ton - JACK, TRIPOD - With Factory Installed Spring Loaded Coasters | 1 | |
| 0301037590 | REAR BEARING DEFLECTOR | 1 | |
| 0301037870 | REAR BEARING DEFLECTROR | 1 | |
| 0301047270 | DEGASSING PIPE, REAR BEARING | 1 | |
| 0319111330 | PUMP BODY,REAR BEARING | 1 | |
| 0319720150 | PIPE, REAR BEARING RECUP, 2ND | 1 | |
| 0319739820 | PIPE,METERING VALVE-AIR BLEED | 1 | |
| 0319760170 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0319760190 | CONTROL AND MONITORING HARNESS | 1 | |
| 0319767910 | CONTROL AND MONITORING HARNESS | 1 | |
| 0319768240 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0319768270 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0319768420 | CONTROL AND MONITORING HARNESS | 1 | |
| 0319850580 | PUMP AND METERING VALVE ASSY,ADJUSTED | 1 | |
| 0319850740 | PUMP AND METERING VALVE ASSY, ADJUSTED | 2 | |
| 0319850750 | PUMP AND METERING VALVE ASSY, ADJUSTED | 1 | |
| 0319850760 | PUMP AND METERING VALVE ASSY, ADJUSTED | 1 | |
| 0319850770 | PUMP AND METERING VALVE ASSY, ADJUSTED | 1 | |
| 0319850800 | PUMP AND METERING VALVE ASSY,ADJUSTED | 1 | |
| 0340KD | SOLDERING PEN | 1 | |
| 0356410400 | RING, EXPANDABLE | 1 | |
| 0356750110 | P100 CONTROL AND MONITORING HARNESS | 1 | |
| 035A-39302 | BEARING /USED ON 10 A-39117-21,-22 | 1 | |
| 04-22022 | DEBURING TOOL | 1 | |
| 04-22060 | DOUBLE EDGE DEBURRING TOOL MADE OF M-F2 STEEL | 1 | |
| 04-22181 | DEBURRING TOOL SET | 1 | |
| 04-256-F | 37 DEGREE DOUBLE LAP FLARING TOOL | 2 | |
| 04-3090-0 | Spring Tension Clamps (Throat depth: 2") (Jaw capacity: 0" to 7/16") (Add to cart: Add To Cart) | 1 | |
| 04-3090-1/2 | Spring Tension Clamps (Throat depth: 2") (Jaw capacity: 0" to 7/16") (Add to cart: Add To Cart) (Throat depth: 3-1/2") (Jaw capacity: 9/16" to 1") (Add to cart: Add To Cart) | 1 | |
| 04-3090-1/4 | Spring Tension Clamps (Throat depth: 2") (Jaw capacity: 0" to 7/16") (Add to cart: Add To Cart) (Throat depth: 3-1/2") (Jaw capacity: 9/16" to 1") (Add to cart: Add To Cart) (Throat depth: 3") (Jaw capacity: 1/4" to 15/32") (Add to cart: Add To Cart) | 1 | |
| 04-400-F | FLARING TOOLS FLARING TOOL 37 DEG. | 1 | |
| 04-507-FB | Rol-Air 37° Flaring Tool (Motor: Soft Copper, Aluminum & Brass) (Materials: 3/16", 1/4", 5/16", 3/8", 1/2") (Sizes: 2.5 lbs (1.1 kgs)) (Add to cart: Add To Cart) | 1 | |
| 04-58100 | IRWIN® Spring Clamps (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-58200 | IRWIN® Spring Clamps (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Jaw capacity: 2" (51 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-58300 | IRWIN® Spring Clamps (Jaw capacity: 1" (25 mm)) (Add to cart: Add To Cart) (Jaw capacity: 2" (51 mm)) (Add to cart: Add To Cart) (Jaw capacity: 3" (76 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-634 | Nickel Plated Spring Clamps (Jaw opening: 1" (25 mm)) (Overall length: 4" (102 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-636 | Nickel Plated Spring Clamps (Jaw opening: 1" (25 mm)) (Overall length: 4" (102 mm)) (Add to cart: Add To Cart) (Jaw opening: 2" (51 mm)) (Overall length: 6" (152 mm)) (Add to cart: Add To Cart) | 1 | |
| 04-639 | Nickel Plated Spring Clamps (Jaw opening: 1" (25 mm)) (Overall length: 4" (102 mm)) (Add to cart: Add To Cart) (Jaw opening: 2" (51 mm)) (Overall length: 6" (152 mm)) (Add to cart: Add To Cart) (Jaw opening: 3" (76 mm)) (Overall length: 9" (229 mm)) (Add | 1 | |
| 04-640 | Nickel Plated Spring Clamps (Jaw opening: 1" (25 mm)) (Overall length: 4" (102 mm)) (Add to cart: Add To Cart) (Jaw opening: 2" (51 mm)) (Overall length: 6" (152 mm)) (Add to cart: Add To Cart) (Jaw opening: 3" (76 mm)) (Overall length: 9" (229 mm)) (Add | 1 | |
| 04-94003 | Speed Driver Hole Deburring (Description: Speed Driver) (Add to cart: Add To Cart) | 1 | |
| 04-CSX-1/4 | CSX SPRING LOAD TEMP. FASTENER DIA.=1/4" GRIP=0-1/2" | 1 | |
| 04-CSX-1/8 | CSX SPRING LOAD TEMP. FASTENER DIA.=1/8" GRIP=0-1/2" | 1 | |
| 04-CSX-5/32 | CSX SPRING LOAD TEMP. FASTENER 5/32" D 0-1/2" GRIP | 1 | |
| 04-CSXEL-1/4 | CSX SPRING LOAD TEMP. FASTENER DIA.=1/4" GRIP=1-1.5" | 1 | |
| 04-CSXEL-1/8 | CSX SPRING LOAD TEMP. FASTENER DIA.=1/8" GRIP=1-1.5" | 1 | |
| 04-CSXEL-3/16 | CSX SPRING LOAD TEMP. FASTENER DIA.=3/16" GRIP=1-1.5" | 1 | |
| 04-CSXK-1/4 | CSX SPRING LOAD TEMP. FASTENER DIA.=7/32" GRIP=1.5-2.5" | 1 | |
| 04-CSXK-3/16 | CSX SPRING LOAD TEMP. FASTENER DIA.=3/16" GRIP=2-2.5" | 1 | |
| 04-CSXL-1/4 | CSX SPRING LOAD TEMP. FASTENER DIA.=1/4" GRIP=1/2-1" | 1 | |
| 04-CSXL-3/16 | CSX SPRING LOAD TEMP. FASTENER DIA.=3/16" GRIP=1/2-1" | 1 | |
| 04-E-111P | SHAVIV® AEROBURR DEBURRING SETS ( DESCRIPTION: REPLACEMENT BLADES-THIN POINTED, HEAVY-DUTY 3.2 MM ) | 1 | |
| 04-K380 | ROSEBUD DEBURRING BIT 1/4, 3/8, 3/4 | 1 | |
| 0465750250 | P100 CONTROL AND MONITORING HARNESS | 1 | |
| 0465940230 | METERING VALVE ASSY, ADJUSTED | 1 | |
| 04AZA721 | MEASURING HEAD HOLTEST/BOREMATIC 0.5-0.65" | 1 | |
| 04AZA722 | MEASURING HEAD HOLTEST/BOREMATIC 0.65-0.8" | 1 | |
| 04AZA730 | MEASURING HEAD HOLTEST/BOREMATIC 0.8-1" | 1 | |
| 04AZB139 | MEASURING HEAD HOLTEST/BOREMATIC 0.275-0.35" | 1 | |
| 04AZB140 | MEASURING HEAD HOLTEST/BOREMATIC 0.35-0.425" | 1 | |
| 04AZB141 | MEASURING HEAD HOLTEST/BOREMATIC 0.425-0.5" | 1 | |
| 05-05555 | AERONCA FITTING ASSY TAIL SKID SPRING | 1 | |
| 05-9494 | CENTERING STUD | 1 | |
| 05K22680 | KIT-CYLINDER,PISTON & RING ASSY(TIO-540-AJ1A) | 4 | |
| 07-401B | Shank Adapters (Shank size: .401" Shank) (Accepts: .401" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Add to cart: Add To Cart) | 1 | |
| 07-498A | Shank Adapters (Shank size: .401" Shank) (Accepts: .401" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Add to cart: Add To Cart) (Shank size: .498" Shank) (Accepts: .498" Shank Sets) (Overall length (without spring): 3-3/4"{ (95 mm)) (Ad | 1 | |
| 07100 | BEARING: CONE,ROLLER,TAPERED, MADE TO CLASS 2 W/CODE 629 | 6 | |
| 070600 | RDA Spring Type (for EZ-TorQ 10i) | 1 | |
| 070605 | RDA Spring Type (for EZ-TorQ 50i) | 1 | |
| 070610 | RDA Spring Type (For EZ-TorQ 100i) | 1 | |
| 070615 | RDA Spring Type (For EZ-TorQ 150i) | 1 | |
| 0715 75 204 | MAGNETIC MEASURING STAND H390 MM | 1 | |
| 0715 76201 | PRECISION MEASURING DIAL INDICATOR 0-10 mm | 1 | |
| 074616 | SOLDERING REFLECTOR NOZZLE | 2 | |
| 0760CD 0832SD/10 0A04 0A08MSET 0A08M/10 | SOLDERING IRON 600°-800° F HEAT RANGE | 1 | |
| 08-100 | Adapto Hand Flaring Kit (Description: Flaring Tool Only) (Add to cart: Add To Cart) | 2 | |
| 08-13774 | TCM 6 CYLINDER SPRING COMPRESSOR TOOL | 1 | |
| 085433-02600 | EXTRACTOR-SHOULDERED RING | 1 | |
| 086-034 | SPRING STEEL ROD CLIP FOR SHAFT 1.062-1.312 DIA | 1 | |
| 09-896 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) | 1 | |
| 09-896-1 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) | 1 | |
| 09-897 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RB-1 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RB-2 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RB-3 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RB-4 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RB-5 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RH-2 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 2 | |
| 09-RH-3 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 09-RH-4 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 0920BD | SOLDERING PEN | 1 | |
| 09P1079 | Adjustment ring | 1 | |
| 0EX36B | SPANNER OPEN END/RING - 1-1/8" | 3 | |
| 0EX48B | SPANNER OPEN END/RING - 1-1/2" | 3 | |
| 0EX52B | SPANNER OPEN END/RING - 1-5/8" | 2 | |
| 0G13400141 | GAS SOLDERING SET | 1 | |
| 0U131467 | SOLDERING FIXTURE | 1 | |
| 0U141257 | CONE-O-RING,THREADED SLEEVE,MICROSWITCH 2 | 1 | |
| 0U141271 | CONE-O-RING,THREADED SLEEVE,MICROSWITCH 1 | 1 | |
| 0U141330 | ASSEMBLY TOOL NEEDLE BEARING | 1 | |
| 0U142592 | CONE-0-RING,COMMAND PISTON | 1 | |
| 0U145414 | RING SHRINKING SEAL AND BACKUP | 10 | |
| 0U145506 | MULTIMETER - DIGITAL/ANALOG (OR EQUIVALENT METER MEETS TASK REQUIREMENTS) 1 1863 MEGOHMMETER 1 14053 WIRE RETRIEVER 1 36122 ADAPTOR-CHARGING,PITOT PROBE 1 173784 ADAPTER OXYGENT SEVICING 2 897000 WING JACK 1 2231058 RING GAUGE 1 2239106 LOADCHECKING | 24 | |
| 0U146547 | DRIVING RING | 1 | |
| 0U300997 | DUMMY RETAINER RING | 1 | |
| 0U7J1 | METERING EQUIPMENT, BIOCIDE, HAMMONDS FUEL ADDITIV | 1 | |
| 0UT168 | SPRING LOADING TOOL | 1 | |
| 0VACX2 | DESOLDERING BULB, VACUUM ACTION, TEFLON | 1 | |
| 1-12465A | LOCK ROD SILENCER BEARING | 1 | |
| 1-21046-3 | RETAINING RING, DIE SET | 1 | |
| 1-457-525 | SP1007 NOGA 007 DEBURRING TOOL SET | 1 | |
| 1-473-10-2-2 | ERGO™ ENGINEERING FILE SET SECOND CUT 250 MM - 3 PCS | 1 | |
| 1.325.010 | UAS - WHEEL ADAPTER RING FOR A320 NLG | 1 | |
| 1.325.053 | UAS - WHEEL ADAPTER RING FOR A320 MLG | 1 | |
| 1.325.066 | UAS - WHEEL ADAPTER RING FOR B767 NLG | 1 | |
| 1.325.112 | UAS - WHEEL ADAPTER RING FOR B767 MLG | 1 | |
| 1.325.117 | UAS - WHEEL ADAPTER RING FOR A320 NLG EX-VIVA | 1 | |
| 1.325.177 | UAS - WHEEL ADAPTER RING FOR B787-8 MLG | 1 | |
| 1.325.239 | UAS - WHEEL ADAPTER RING FOR B787 NLG | 1 | |
| 1.325.275 | UAS - WHEEL ADAPTER RING FOR B787-9 MLG | 1 | |
| 1/2-20 | Gauge thread ring | 3 | |
| 10-345601-001 | STEERING CONTROL HYDRAULIC MODULE | 1 | |
| 10-345601-002 | STEERING CONTROL HYDRAULIC MODULE | 1 | |
| 100-200-12-90 | SPRING CLIP 3/4 DIA | 1 | |
| 100-48572 | BEARING INSTALLATION TOOL, DRIVE GEAR | 1 | |
| 100-49480 | Bearing Holder | 1 | |
| 100-5-120 | TR ENGINEERING HAND PUMP | 1 | |
| 10005B | BEARING NEEDLE 3/8 X 5/8 X 1/2 | 1 | |
| 1001 | COMPREHENSIVE REPAIR KIT CONTAINING PATCHES, ADHESIVE, AND INSTRUCTIONS FOR REPAIRING INFLATABLE SLIDES AND OTHER PRODUCTS. | 10 | |
| 10019B | BEARING NEEDLE 1/4 X 7/16X5/16 | 1 | |
| 10023B | BEARING NEEDLE 1/2 X 11/16X5/8 | 1 | |
| 100268-1 | HYDROLOCK LEGREST, GAS SPRING | 3 | |
| 10028B | NEEDLE BEARING | 1 | |
| 10028FC | FULL COMPLEMENT NEEDLE BEARING | 1 | |
| 10049B | BEARING NEEDLE 11/16X7/8 X 5/8 | 1 | |
| 100DAN | SPRING BALLANCE (100DAN) | 1 | |
| 101-00304 | Fuel Quantity Adapter Module for Swearingen SA 226 | 1 | |
| 101-00470 | Fuel Quantity Adapter Module for Swearingen Merlin IIIC, IVC, III | 2 | |
| 101-00877 | Fuel Quantity Adapter Module for Swearingen SJ30Â2 | 1 | |
| 1021-1 | SPRING PAD, | 1 | |
| 10237-1 | RED C/B LOCK OUT RING | 15 | |
| 1026 | DELTA RING #1026 | 1 | |
| 1027 | 2Ó D-RING | 1 | |
| 10081 | BEARING CAGED NEEDLE | 2 | |
| 10082 | BEARING CAGED NEEDLE | 2 | |
| 105-10101W4 | CENTERING DEVICE | 1 | |
| 105-14101W2 | OUTER NEEDLE BEARINGS EXTRACTOR | 1 | |
| 105-14101W7 | NEEDLE BEARINGS DRIVE TOOL | 1 | |
| 105-14101W7/PHP | NEEDLE BEARINGS DRIVE TOOL | 1 | |
| 105-14181W1 | NEEDLE BEARINGS ASSEMBLY FIXTURE | 1 | |
| 105-14181W3 | NEEDLE BEARINGS EXTRACTOR | 1 | |
| 105-14181W4 | NEEDLE BEARINGS EXTRACTOR | 1 | |
| 105-31702W-KIT | BK117/EC145/UH-72 TAIL ROTOR CENTERING TOOL AND BEARING / BUSHING TOOLS | 1 | |
| 105-31702W23 | MEASURING DEVICE | 1 | |
| 105-31803 W2 | MEASURING DEVICE | 1 | |
| 105-31803W2 | MEASURING DEVICE | 1 | |
| 105-81022.03 | DISTANCE RING | 1 | |
| 10730 | TIE DOWN RING | 9 | |
| 1075H | SELF SUFFICIENT GAS SOLDERING IRON KIT + CASE FACOM | 1 | |
| 109-0110-01-109E023A | TOOL ASSEMBLY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 109-0110-81-1 | ADAPTER SLEEVE,BEARING | 1 | |
| 109-0111-09-101 | SLIDING RING | 1 | |
| 109-0133-05-101 | TAIL ROTOR DUPLEX BEARING | 1 | |
| 109-3101-06-111 | PULLER, DUPLEX BEARING REMOVAL | 1 | |
| 109-3101-39-1 | ADAPTER ASSY M/R HING DUBLEX BEARING | 1 | |
| 109-3101-40-1 | ADAPTER ASSY M/R HING DUBLEX BEARING | 1 | |
| 109-3101-63-1 | ADAPTOR, BEARING OUTER REMPLA | 1 | |
| 109-3110-06-111 | PULLER, DUPLEX BEARING REMOVAL PART | 1 | |
| 109-3110-07-01 | SWASHPLATE DUPLEX BEARING INSTALLATION | 1 | |
| 109-3110-07-1 | RING SWASJH PLATE DUPLEX BEARING INSTALLATION | 1 | |
| 109-3130-23-1 | T.R.D SHAFT HANGER BEARING INSTALLATION | 1 | |
| 109-3130-51-101 | T/R DRIVE QUILL RING NUT | 1 | |
| 109-3130-53-111 | TOOL,T/R PITCH CHANGE SLIDER RING NUT REMOVAL/INSTALATION | 1 | |
| 109-3130-53-117 | TOOL, T/R PITCH CHANGE SLIDER RING NUT REMOVAL/INSTALLATION | 1 | |
| 109-3130-530111 | T/R SLIDERING NUT REM/INST | 1 | |
| 109-3130-55-117 | TOOL, T/R PITCH CHANGE SLIDER RING NUT | 1 | |
| 109-3130-66-101 | TAIL ROTOR PITCH CHANGE HOUSING, DUPLEX BEARING INSTALL | 1 | |
| 109-3130-69-101 | TR DUPLEX BEARING INSTALL | 1 | |
| 109-3130-70-101 | TR DUPLEX BEARING REMOVAL | 1 | |
| 109-3130-73-101 | RING, T/R SLIDER BUSHING INSTALLATION | 1 | |
| 109-3130-81-101 | TAIL ROTOR DRIVE SHAFT SUPPORT BEARING REPLACEMENT. | 1 | |
| 109-3130-84-101 | TAIL ROTOR DRIVE SHAFT RING NUTS REMOVAL/INSTALLATION TOOL | 1 | |
| 109-3130-84-121 | TOOL ASSY, TAIL ROTOR DRIVE SHAFT RING NUTS REMOVAL/INSTALLATION | 1 | |
| 109-3130-85-101 | TOOL KIT,T/R PITCH CHANGE SHAFT DOUBLE BEARING REMOVAL/INSTL (NSCM A0126) | 1 | |
| 109-3400-45-1 | TOOL, T/R PITCH CHANGE SLIDER RING NUT | 1 | |
| 109-3400-46-107 | 90 DEGREES GEARBOX INPUT PINION SMALL RING NUT REMOVAL | 1 | |
| 109-3400-59-1 | PULLER, THRUST BEARING HALF INNER RACE (UPPER AND LOWER) | 1 | |
| 109-3401-61-101 | T.R.D SHAFT HANGER BEARING CENTERING | 1 | |
| 109-3401-62-101 | TAIL ROTOR DRIVE BEARING PROTECTOR | 1 | |
| 109-3401-64-105 | AGUSTA TOOL - ENGINE TO TRANS DRIVEHAFT REMOVAL/INSTL - COVERING | 1 | |
| 109-3401-70-115 | ROTOR BRAKE ADAPTER RING NUT REMOVE/INSTALL TOOLS | 1 | |
| 109-3501-09-1 | ADAPTER,NOSE/MAIN LG SHOCK STRUT UPPER RING NUT REMOVAL/INSTL | 1 | |
| 109011001-109E023A | TOOL ASSY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 10998-1 | POSITIONER, SPRING LOADED, MS | 1 | |
| 109G6220G03-101 | TOOL ASSY, SWASHPLATE DUPLEX BEARING POSITIONING | 1 | |
| 10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT, | 1 | |
| 10C1023 | RING - SUPPORT - ENGINE HANDLIN | 1 | |
| 10C1099G01 | TOOL, INSTALLATION - LPT FORWARD COUPLING NUT RETAINING RING, | 1 | |
| 10C1120G01 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDED BY 10C1120G02) | 1 | |
| 10C1120G02 | FIXTURE, INSTALL/REMOVE - NO. 5 BEARING RETAINING NUT (INSTALL/REMOVE FIXTURE) (SUPERSEDES 10C1120G01) | 1 | |
| 10C1127G01 | TOOL, INSTALLATION AND REMOVAL. - REAR RETAINING RING, HPT | 1 | |
| 10C1138 | ADAPTER - MOTORING/LOCKING CORE ENGINE | 1 | |
| 10C1138G01 | MOTORING / LOCKING ADAPTER | 1 | |
| 10C1138G03 | ADAPTER, MOTORING/LOCKING-CORE ENGINE | 1 | |
| 10C1302 | MOTORING ADAPTER | 1 | |
| 10C1400 | GAGE - NO 4 BEARING TO FWD ROTATING OIL SEAL | 1 | |
| 10C1400P01 | GAGE, NO. 4 BEARING TO FORWARD, ROTATING OIL SEAL, | 1 | |
| 10C2408 | MATING RING INSTALLER, AXIS D, E,F, G | 1 | |
| 10C2410 | PULLER, MATING RING AXIS D | 1 | |
| 10C2410G01 | PULLER, MATING RING, AXIS-D | 1 | |
| 10D/16328 | BEARING INDICATOR | 1 | |
| 10ME65B01900 | EXTRACTION TOOL - OUTBOARD FLAP CARRIAGE BEARING | 6 | |
| 10ME65B02000 | EXTRACTION TOOL - INBOARD FLAP (CARRAIGE BEARING) | 4 | |
| 10SF16 | BEARING-SPHERICAL-PLAIN-RDL | 1 | |
| 1100 | QUAD RING, N | 6 | |
| 11001A | RIVET BUSTER | GROOVED BARREL WITH LOCK SPRING | SWAN NECK HANDLE | 11 | 1 | |
| 1103 | MOBILE HYDRAULIC FILTERING UNIT | 5 | |
| 11001 | RIVET BUSTER | GROOVED BARREL WITH LOCK SPRING | S | 12 | |
| 11018 | KK-SERIES SHORT BODY SPRING CLECOS 3/32" | 1 | |
| 11019 | KK-SERIES SHORT BODY SPRING CLECOS 1/8" | 1 | |
| 11020 | KK-SERIES SHORT BODY SPRING CLECOS 5/32" | 1 | |
| 11021 | KK-SERIES SHORT BODY SPRING CLECOS 3/16" | 2 | |
| 11038 | SPRING, HYD SHUT OFF VALVE | 4 | |
| 111-848 | ADAPTER FOR PLAY MEASURING EQUIPMENT | 1 | |
| 1116-4000-21 | ANALYZER - DATA BUS, ARING 429 | 1 | |
| 1116-400021 | ANALYZER DATA BUS ARING 429 | 1 | |
| 1121-0628-P5 | PACE ENDURA THERMO-DRIVE DESOLDERING TIP (1121-0628-P5:GMFDM) | 1 | |
| 11251-55 | TIE DOWN RING | 4 | |
| 11294-1 | POSITIONER, SPRING LOADED, MS | 1 | |
| 11297-1 | POSITIONER, SPRING LOADED (ST2220-1-4 | 1 | |
| 11297-15 | POSITIONER, SPRING LOADED, MS | 2 | |
| 11297-16 | POSITIONER, SPRING LOADED, MS | 1 | |
| 11297-17 | POSITIONER, SPRING LOADED(ST2220-1-52 | 1 | |
| 11297-18 | POSITIONER, SPRING LOADED(ST2220-1-53 | 1 | |
| 11297-19 | POSITIONER, SPRING LOADED(ST2220-1-54 | 1 | |
| 11297-2 | POSITIONER, SPRING LOADED (ST2220-1-5 | 1 | |
| 11297-20 | POSITIONER, SPRING LOADED(ST2220-1-55 | 1 | |
| 11297-23 | POSITIONER, SPRING LOADED(ST2220-1-60) | 1 | |
| 11297-24 | POSITIONER, SPRING LOADED(ST2220-1-65 | 1 | |
| 11297-3 | POSITIONER, SPRING LOADED (ST2220-1-6 | 1 | |
| 11297-4 | POSITIONER,SPRING LOADED(ST2220-1-14A | 1 | |
| 11297-5 | POSITIONER, SPRING LOADED(ST2220-1-21 | 1 | |
| 11297-6 | POSITIONER, SPRING LOADED(ST2220-1-30) | 1 | |
| 11298-1 | POSITIONER, SPRING LOADED(ST2220-1-8 | 1 | |
| 11298-10 | POSITIONER, SPRING LOADED (ST2220-1-25 | 1 | |
| 11298-13 | POSITIONER,SPRING LOADED(ST2220-1-28A | 1 | |
| 11298-15 | POSITIONER, SPRING LOADED (ST2220-1-31 | 1 | |
| 11298-18 | POSITIONER,SPRING LOADED(ST2220-1-40) | 1 | |
| 11298-19 | POSITIONER, SPRING LOADED(ST2220-1-41 | 1 | |
| 11298-2 | POSITIONER,SPRING LOADED(ST2220-1-9A | 1 | |
| 11298-3 | POSITIONER, SPRING LOADED, MS | 1 | |
| 11298-4 | POSITIONER,SPRING LOAD(ST2220-1-11A | 1 | |
| 11298-5 | POSITIONER, SPRING LOADED(ST2220-1-16) | 1 | |
| 11298-7 | POSITIONER, SPRING LOAD(ST2220-1-22 | 1 | |
| 11298-9 | POSITIONER, SPRING LOADED (ST2220-1-24) | 1 | |
| 113-368 | GUIDE, SPRING | 1 | |
| 113-540450 | SOLDERING GUN | 1 | |
| 11343 | Norbar 11343 - SPIGOT 16MM FOR RING ENDS | 1 | |
| 114-1045 | TOOL THAT HOLDS THE OUTER WHEEL HALF FOR REMOVAL AND INSTALLATION OF THE BEARING CUP | 1 | |
| 114-1060 | TOOL THAT HOLDS THE OUTER WHEEL HALF FOR REMOVALINSTALLATION OF THE BEARING CUP | 1 | |
| 114-1061 | TOOL THAT HOLDS THE INNER WHEEL HALF FOR REMOVAL OR INSTALLATION OF THE BEARING CUP | 1 | |
| 114-1075 | TOOL THAT HOLDS THE OUTER WHEEL HALF FOR REMOVAL OR INSTALLATION OF A BEARING CUP AND THE INNER WHEEL HALF FOR INSTALLATION OF A BEARING CUP | 4 | |
| 114-1076 | TOOL THAT HOLDS THE INNER WHEEL HALF FOR REMOVAL OF THE BEARING CUP | 3 | |
| 114-1077 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 4 | |
| 114-1079 | TOOL FOR REMOVAL OF BEARING CUPS FROM THE INNER AND OUTER WHEEL HALVES | 4 | |
| 114-1080 | TOOL FOR INSTALLATION OF BEARING CUPS INTO THE INNER AND OUTER WHEEL HALVES | 4 | |
| 114-1086 | TOOL FOR REMOVAL/INSTALLATION OF THE INNER AND OUTER WHEEL HALF BEARING CUPS | 4 | |
| 114-1087 | TOOL FOR REMOVAL/INSTALLATION OF THE INNER AND OUTER WHEEL HALF BEARING CUPS | 4 | |
| 114-1088 | TOOL FOR REMOVAL/INSTALLATION OF THE INNER AND OUTER WHEEL HALF BEARING CUPS | 4 | |
| 114-1089 | TOOL FOR REMOVAL OF BEARING CUPS FROM THE INNER AND OUTER WHEEL HALVES | 4 | |
| 114-1090 | TOOL FOR INSTALLATION OF BEARING CUPS INTO THE INNER AND OUTER WHEEL HALVES | 5 | |
| 114-1091 | TOOL FOR REMOVAL OF BEARING CUPS FROM THE INNER AND OUTER WHEEL HALVES | 4 | |
| 114-1092 | TOOL FOR INSTALLATION OF BEARING CUPS INTO THE INNER AND OUTER WHEEL HALVES | 4 | |
| 114-1107TE | Tool, adjuster spring | 1 | |
| 114-1150 | "GUIDE" TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVE EXCLUDER RINGS | 1 | |
| 114-1180 | TOOL THAT HOLDS A WHEEL HALF FOR REMOVAL OR INSTALLATION OF A BEARING CUP | 1 | |
| 114-1182-AZL | TOOL FOR REMOVAL OF A BEARING CUP / FERRAMENTA PARA REMOC?O DE ROLAMENTO | 1 | |
| 114-1275 | TOOL THAT HOLDS THE OUTER WHEEL HALF FOR REMOVAL OR INSTALLATION OF A BEARING CUP AND THE INNER WHEEL HALF FOR INSTALLATION OF A BEARING CUP | 3 | |
| 114-1285 | LOADING MANDREL TOOL FOR INSTALLATION OF BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-1321 | O-Ring and Backup Ring Assembly Tool | 1 | |
| 114-1361 | Removal and Installation of Bearing Cups holder | 2 | |
| 114-1394 | TOOL THAT HOLDS THE INNER WHEEL HALF FOR REMOVAL AND INSTALLATION OF THE BEARING CUP | 1 | |
| 114-1404 | PISTON SLEEVE BACKUP RETAINER AND O-RING ASSEMBLY TOOL | 1 | |
| 114-1423-AZL | SPLIT RING TOOL FOR SIZING BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-1558 | HOLD FOR OUTER CUP BEARING REMOVAL | 2 | |
| 114-1559 | HOLD FOR INNER CUP BEARING REMOVAL | 2 | |
| 114-1559-AZL | TOOL THAT HOLDS THE INNER WHEEL HALF FOR REMOVAL OF THE BEARING CUP | 1 | |
| 114-1572 | TOOL THAT HOLDS THE OUTER WHEEL HALF FOR REMOVAL OF THE BEARING CUP | 3 | |
| 114-1573 | TOOL THAT HOLDS THE OUTER WHEEL HALF FOR INSTALLATION OF THE BEARING CUP | 3 | |
| 114-1574 | TOOL THAT HOLDS THE INNER WHEEL HALF FOR REMOVAL OF THE BEARING CUP | 3 | |
| 114-1575 | TOOL THAT HOLDS THE INNER WHEEL HALF FOR INSTALLATION OF THE BEARING CUP | 3 | |
| 114-1585 | O-RING AND BACKUP RING INSTALLATION TOOL | 1 | |
| 114-1586 | SPLIT RING TOOL FOR RESIZING BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-1587 | TOOL FOR RESIZING BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-1590 | TOOL THAT HOLDS THE OUTER WHEEL HALF FOR REMOVAL OF THE BEARING CUP | 2 | |
| 114-1590-AZL | TOOL THAT HOLDS THE OUTER WHEEL HALF FOR REMOVAL OF THE BEARING CUP | 1 | |
| 114-1591 | TOOL THAT HOLDS THE OUTER WHEEL HALF FOR INSTALLATION OF THE BEARING CUP | 2 | |
| 114-1592 | TOOL THAT HOLDS THE INNER WHEEL HALF FOR REMOVAL OF THE BEARING CUP | 2 | |
| 114-1593 | TOOL THAT HOLDS THE INNER WHEEL HALF FOR INSTALLATION OF THE BEARING CUP | 2 | |
| 114-1593-AZL | TOOL THAT HOLDS THE INNER WHEEL HALF FOR INSTALLATION OF THE BEARING CUP | 1 | |
| 114-1594 | TOOL THAT HOLDS THE OUTER WHEEL HALF FOR INSTALLATION OF THE BEARING CUP | 2 | |
| 114-1595 | HOLD FOR INNER CUP BEARING INSTALLATION | 2 | |
| 114-1607 | O-RING AND BACKUP RING INSTALLATION TOOL FOR ADJUSTER SLEEVE | 1 | |
| 114-1609 | TOOL THAT RESIZES BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-1610 | DRIVE SHAFT TOOL FOR REMOVAL OF A BEARING CUP | 1 | |
| 114-1669 | TOOL THAT HOLDS THE INNER WHEEL HALF FOR REMOVAL OF THE BEARING CUP | 1 | |
| 114-231 | Tool for installation/removal of adjuster spring | 2 | |
| 114-231TE | Tool, adjuster spring | 1 | |
| 114-266 | REMOVAL,TOOL-BEARING CUP OF OUTER AND INNER WHEEL | 5 | |
| 114-266 PM | REMOVAL,TOOL-BEARING CUP OF OUTER AND INNER WHEEL | 1 | |
| 114-266-AZL | REM/INST BEARING TOOL / FERRAMENTA PARA REM/INST DE ROLAMENTO | 1 | |
| 114-266PM | REMOVAL,TOOL-BEARING CUP OF OUTER AND INNER WHEEL | 1 | |
| 114-268 | INSTALLATION,TOOL- EARING CUP,OUTER AND INNER WHEEL | 5 | |
| 114-268 PM | INSTALLATION,TOOL- EARING CUP,OUTER AND INNER WHEEL | 1 | |
| 114-268PM | INSTALLATION,TOOL- EARING CUP,OUTER AND INNER WHEEL | 1 | |
| 114-279 | TOOL TORQUE PLATE DURING | 1 | |
| 114-291TE | Tool, adjuster spring | 1 | |
| 114-300 | Tool that Holds the Bushing during Installation onto the Bushing | 1 | |
| 114-350 | Hold Tool，outer wheel half，the bearing cup R/I | 1 | |
| 114-376 | Removal and Installation of Bearing Cups holder | 1 | |
| 114-377 | Bearing Cup holder | 1 | |
| 114-417 | SPRING REMOVAL AND INSTALLATION TOOL | 2 | |
| 114-417TE | Tool, adjuster spring | 1 | |
| 114-428 | BEARING CUPS REMOVAL DRIVE SHAFT | 3 | |
| 114-434 | ADJUSTER SLEEVE O-RING INSTALLATION TOOL | 1 | |
| 114-437 | TOOL THAT SIZES BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-438 | ADJUSTER SLEEVE O´RING | 1 | |
| 114-440 | HOLDS THE INNER WHEEL HALF FOR INSTALLATIONREMOVAL OF THE BEARING CUPS | 2 | |
| 114-485 | SPRING REMOVAL AND INSTALLATION TOOL | 1 | |
| 114-498 | BEARING CUP REMOVAL AND FIXTURES | 1 | |
| 114-780-1 | LOADING MANDREL TOOL FOR INSTALLATION OF BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-780-2 | PUSHER TOOL FOR INSTALLATION OF BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-780-3 | SPLIT RING TOOL THAT SIZES BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-780-4 | TOOL THAT SIZES BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-903 | BEARING CUP REMOVAL DRIVE SHAFT | 1 | |
| 114-941 | BEARING CUP REMOVAL DRIVESHAFT | 1 | |
| 114E5803-1 | PUSHER ASSEMBLY, BEARING AND SEAL | 1 | |
| 114G1373-1 | FIXTURE, ALIGNMENT, BEARING SLIDING | 1 | |
| 11561-1 | POSITIONER, SPRING LOADED, MS | 1 | |
| 11568-1 | POSITIONER, SPRING LOADED, MS | 1 | |
| 11570-1 | LOCATOR, SPRING LOADED,A N/MFT | 1 | |
| 11591-1 | POSITIONER, SPRING LOADED, MS | 1 | |
| 11591-2 | POSITIONER, SPRING LOADED, MS | 1 | |
| 116-10002 | 10 V, 32 CHANNEL VOLTAGE IP MODULE, SPRING TERMINAL | 1 | |
| 11615-20 | DATA LOADER -ARING 615 | 1 | |
| 11615-50 | DATA LOADER -ARING 615 | 5 | |
| 117-15004W6.04 | DISTANZRING SPACER | 1 | |
| 11835K15 | BEARING GREASE DISPENSER | 1 | |
| 11C3053 | ADAPTER - TORQUE-INSTALL/REMOVE NO 3 BEARING LOCKNUT | 1 | |
| 11C3128G01 | PULLER - NO. 2 BEARING AND HOUSING, FAN SHAFT EXTENSION | 1 | |
| 11C3144 | ADAPTER - TORQUE - SPANNER NUT - INNER RACE NO 4 BEARING | 1 | |
| 11C3151 | FIXTURE - LIFT AND TURN NO. 1 BEARING SUPPORT HOUSING | 1 | |
| 11C3151G02 | FIXTURE, LIFT AND TURN NO. 1 BEARING SUPPORT HOUSING | 1 | |
| 11C3289 | GUIDE - NO 1 BEARING | 1 | |
| 11C3343 | GAGE SET - ADJ WEAR BUTTON - COMPR ACT RINGS | 1 | |
| 11C3343G01 | GAGE SET, ADJUSTMENT WEAR BUTTON- COMPR ACTUATION RINGS | 1 | |
| 11C3381 | GUIDE-CARBON SEAL - NO. 1 BEARING | 1 | |
| 11C3389 | JACK SCREWS - DIASSEMBLE-STG 5-10 HPC STTR INR RINGS | 1 | |
| 11C3389G01 | JACK SCREWS, DISASSEMBLE - STAGE 5-10 HPC STTR INR RINGS | 1 | |
| 11C3454 | FIXTURE - FLOW CHECK-NO 5 LPT BEARING DAMPER | 1 | |
| 11C3454G02 | FIXTURE, FLOW CHECK - NO. 3 BEARING DAMPERS, FHF | 1 | |
| 11C3474 | GUIDE - INSTALLTION NO 5 BEARING CARBON SEAL | 1 | |
| 11C3543 | FIXTURE - BUILDUP - NO. 5 BEARING HOUSING (BUILDUP FIXTURE) | 1 | |
| 11C3550 | FIXTURE - HANDLING/INSTALLATION - NO. 5 BEARING HOUSING (HANDLING/INSTALLATION FIXTURE) | 1 | |
| 11C3990G01 | SPL-12371 - DRIVE PAD CARBON SEAL & MATING RING KIT | 1 | |
| 11C3990G02 | DRIVE PAD CARBON SEAL & MATING RING KIT | 1 | |
| 11C3991G01 | SPL-12372 - EDP & FUEL PUMP CARBON SEAL & MATING RING KIT | 1 | |
| 11C3991G02 | EDP & FUEL PUMP CARBON SEAL & MATING RING KIT | 1 | |
| 11C3992G01 | SPL-12373 - IDG CARBON SEAL & MATING RING KIT | 1 | |
| 11C3992G02 | IDG CARBON SEAL & MATING RING KIT | 1 | |
| 11C3994G01 | IDG MATING RING KIT (SPL-12374) | 1 | |
| 11C3994G02 | SPL-12374 - IDG MATING RING KIT | 1 | |
| 11C4110 | GUIDE - NO. 3 BEARING (BEARING GUIDE) | 1 | |
| 11C4110G02 | GUIDE, NO. 3 BEARING (BEARING GUIDE) | 1 | |
| 11C4232 | FIXTURE - RESTRAINING-SEAL - STATIONARY INNER FWD NO 5 BEARING | 1 | |
| 11C4254G01 | FIXTURE, CAL-ROD HEATER - NO. 1 BEARING HOUSING (208-240 VAC, 50-60 HZ) | 1 | |
| 11C4260 | FIXTURE - LIFT & TURN-FWD FAN SHAFT & NO 2 BEARING | 1 | |
| 11C4260G02 | FIXTURE, LIFT/TURN - FORWARD FAN SHAFT AND NO. 2 BEARING | 1 | |
| 11C4262 | FIXTURE, LIFT & TURN FWD FAN SHAFT & NO 2 BEARING | 1 | |
| 11C4347 | RING FAN FORWARD CASE SUPPORT | 1 | |
| 11C4432 | RING - SUPPORT MANIFOLD FUEL SYSTEM | 1 | |
| 11C4486 | FAN FWD CASE SUPPORT RING | 1 | |
| 11C4486G01 | RING, FAN FORWARD CASE SUPPORT | 1 | |
| 11C4523 | DISASSEMBLY FIXTURE-STAGE 5 RING | 1 | |
| 11C4523G01 | FIXTURE, DISASSEMBLY - STAGE 5 RING RETAINER | 1 | |
| 11C4583 | ADAPTER WRENCH NO 2 BEARING MID NUT | 1 | |
| 11C4583G04 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 11C4598 | STAND-ASSEMBLY/DISASSEMBLE NO. 2 BEARING (WITH HYD PUMP) | 1 | |
| 11C4598G02 | STAND, ASSEMBLY/DISASSEMBLY NO. 2 BEARING HOUSING | 1 | |
| 11C4847G01 | FIXTURE, LIFT AND TURN NO. 2 BEARING HOUSING | 1 | |
| 11MIT65B01221-4 | HOLDING WRENCH - METERING ROD ANCHOR TUBE, NOSE LANDING GEAR | 1 | |
| 11MIT65B01231-1 | TORQUE ADAPTER -0 BEARING | 1 | |
| 12-04809 | ATS CST173 PUSH ROD SPRING COMPRESSOR | 2 | |
| 12-301520-110-1 | BEARING EQUIPPED LH | 1 | |
| 12-43-04-102 | REAR AND FRONT WHEEL CENTERING FIXTURE | 1 | |
| 12045-019-001 | ELEVATOR SPRING CARTRIDGE MOUNTING SPACER | 1 | |
| 121G875041-601 | WIRING HARNESS,PS ADAPTER-CYCLE STICK TEST BENCH | 1 | |
| 1230B.25 | ELECTRONIC SOLDERING IRON + STAND RANGE FROM 25W-40W | 1 | |
| 1233-300 | E. RDS-31, RADIATION MONITORING ALARM BOX | 1 | |
| 12345-032-001 | SLEEVED BEARING INST'L / REMOVAL STAKING TOOL | 1 | |
| 12345-032-019 | SLEEVED BEARING INST'L / REMOVAL STAKING TOOL | 1 | |
| 12445-052-001 | BEARING MLG INBOARD DOOR HINGE REMOVAL TOOL | 1 | |
| 126 | MDCD-UPPER MAIN/AUX SILL SPLICE/STRINGER | 7 | |
| 12845-207-007 | DIGITAL NOSE WHEEL STEERING TEST SET | 1 | |
| 12845-207-011 | DIGITAL NOSE WHEEL STEERING TEST SET | 3 | |
| 12ME65B02000 | EXTRACTION TOOL - INBOARD FLAP CARRAIGE BEARING | 10 | |
| 12MIT65B01221-4 | SUPPORT - METERING ROD, NOSE LANDING GEAR | 1 | |
| 13-03304 | Bowers 13-03304 Comparator Stand Plain Column Height 284mm Measuring Table Area 98 x 115mm | 1 | |
| 13-03305 | Bowers 13-03305 Comparator Stand Plain Column Height 320mm Measuring Table Area 98 x 180mm | 1 | |
| 13-03306 | Bowers 13-03306 Comparator Stand Thread Column Height 320mm Measuring Table Area 98 x 180mm | 1 | |
| 13-03308 | Bowers 13-03308 Comparator Stand Handwheel Column Height 320mm Measuring Table Area 98 x 180mm | 1 | |
| 13-03309 | Bowers 13-03309 Comparator Stand Handwheel Column Height 320mm Measuring Table Area 150 x 200mm | 1 | |
| 13-1423102 | Bowers 13-1423102 Comparator Stand Granite Grade 00 Height 250mm Measuring Table Area 230 x 200 x 50mm | 1 | |
| 13-3022 | Bowers 13-3022 Standard Tracer SH Smallest Bore Dia 8mm Max. Measuring Depth 27mm Included in the Delivery | 1 | |
| 13-3054 | Bowers 13-3054 Axis and Knives Tracer AH for Measuring Small Axis Knives Edges and Wires | 1 | |
| 13-3056 | Bowers 13-3056 Bore tracer BH Smallest bore Dia 2.5mm Max. Measuring Depth 20mm | 1 | |
| 13-3058 | Bowers 13-3058 Concave-Convex tracer KKH for Measuring Concave and Convex Work Pieces Having a Minimum Radius of 5mm. Also Irregular Curves can be Measured. Use Minimum cut-off and Length of Traverse | 1 | |
| 130-5569 | KUNZ GUIDE BEARING 23X110 MM | 1 | |
| 130.5571 | KUNZ GUIDE BEARING 28X110 MM | 1 | |
| 130W00-460-56 | ADJUSTMENT TOOL (MONITORING CENTERING DEVICE) | 1 | |
| 132.5010 | WHEEL ADAPTER RING FOR A320 NLG | 1 | |
| 132.5053 | WHEEL ADAPTER RING FOR A320 MLG | 1 | |
| 132.5066 | WHEEL ADAPTER RING FOR B767 NLG | 1 | |
| 132.5067 | WHEEL ADAPTER RINGS | 1 | |
| 132.5068 | NLG ADAPTER RING | 1 | |
| 132.5079 | KUNZ ADAPTER RINGS FOR A320 | 1 | |
| 132.5084 | KUNZ ADAPTER RINGS FOR A321 | 1 | |
| 132.5112 | WHEEL ADAPTER RING FOR B767 MLG | 1 | |
| 132.5117 | WHEEL ADAPTER RING FOR A320 NLG EX-VIVA | 1 | |
| 132.5177 | WHEEL ADAPTER RING FOR B787-8 MLG | 1 | |
| 132.5239 | WHEEL ADAPTER RING FOR B787 NLG | 1 | |
| 132.5275 | WHEEL ADAPTER RING FOR B787-9 MLG | 1 | |
| 132.5312 | WHEEL ADAPTER RING FOR 3-1720 | 1 | |
| 132.5313 | WHEEL ADAPTER RING FOR 3-1701 | 1 | |
| 1230.4 | ELECTRONIC SOLDERING IRON + STAND RANGE FROM 25W-40W | 1 | |
| 13061 | MEASURING DEVICES | 1 | |
| 13270S18R75 | BALL LOCK PIN D.ACTING ¿18 X 75 STEEL RING HANDLE | 1 | |
| 14-6801-0120 | TIRE BEAD BREAKER -- LOCKING RING | 12 | |
| 14-6806-6011 | INSTRUMENT FOR MEASURING AND CONTROLLING PRESSURES CALLED MANOMETER | 23 | |
| 14-6807-6011 | INSTRUMENT FOR MEASURING AND CONTROLLING PRESSURES CALLED MANOMETER | 19 | |
| 14-6854-0000 | Main Tire Bead Break Ring | 1 | |
| 14-6855-0000 | Nose Wheel Bead Break Ring | 1 | |
| 1401-220 | TACAN BEARING AND SIMULATION 220V | 1 | |
| 170 | INDUSTRIAL-GRADE CURING OVEN WITH PRECISE TEMPERATURE CONTROLS, IDEAL FOR COMPOSITE MATERIALS. | 1 | |
| 1652 | JET BRAND FOOT SHEARS 16 GAUGE 52 SHEARING CAPAC | 4 | |
| 1703 | D RING WORK. LOAD 1670 LBS | 2 | |
| 1843 | ADAPTER (GROUND SUPPORT ENGINEERING, MIAMI, FLORIDA) | 1 | |
| 14680 | 6" INSIDE SPRING CALIPER | 1 | |
| 14681 | 6" OUTSIDE SPRING CALIPER | 1 | |
| 097772 | SCR FIRING CIRCUIT - PRINTED CIRCUIT CARD PC1 | 1 | |
| 101068 | “O” - Ring Needle – Various | 1 | |
| 103132 | BEARING, NEEDLE | 4 | |
| 111848 | ADAPTER FOR PLAY MEASURING EQUIPMENT | 1 | |
| 134899 | MONITORING AND CONTROL ELECTRONIC BOX | 1 | |
| 135094 | ADJUSTING TOOL FOR CINTERING DEVICE | 1 | |
| 135560 | Henkel 97215 LOCTITE Cartridge to Syringe Adapter | 1 | |
| 137918 | RING, DIAPHRAGM | 1 | |
| 144357 | Hand Support Ring VZ-Series | 1 | |
| 14701FE240-40-0 | SHOULDERED RING TOOL | 1 | |
| 147T4-8011 | BODY SHORING | 1 | |
| 14CHB1 | TESTING MEDIUM - GAP MEASURING EPOXY | 1 | |
| 14ME65B00161 | GUIDE - BEARING, TRUNNION ALIGNMENT, WING LANDING GEAR | 3 | |
| 14ME65B00161-1 | MLG GUIDE BEARING TRUNNION | 1 | |
| 15977 | GLIDER RING | 3 | |
| 151142 | Ball Bearing Disassembly Press | 1 | |
| 1106926 | INSERTER BEARING AND BUSHING | 1 | |
| 1325067 | WHEEL ADAPTER RINGS | 1 | |
| 1325215 | UAS WHEEL ADAPTER RING NLG | 1 | |
| 1325216 | UAS WHEEL ADAPTER RING MLG | 1 | |
| 1445142 | O RING SEAL DIA 15 (SIMRIT) | 1 | |
| 11289090 | GAS SOLDERING IRON | 1 | |
| 145502183 | METALLIC RING FOR MUSHROOM HEAD | 1 | |
| 145502184 | METALLIC RING FOR MUSHROOM HEAD | 1 | |
| 145502193 | PLASTIC RING FOR MUSHROOM HEAD | 1 | |
| 1525-510 | FIXTURE, BEARING PRELOAD | 1 | |
| 15421-103 | PULLER # FWD PULLER, SPRING END CLG | 1 | |
| 1544320AT7-101 | LVDT GUIDE RING ASSEMBLY TOOL | 1 | |
| 15F1295 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| 15F2397 | TOWBAR - AIRPLANE, TOWING AND STEERING | 4 | |
| 15F2716 | TOWBAR - AIRPLANE, TOWING AND STEERING | 5 | |
| 15F2930 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| 15F3164 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| 15F3166 | TOWBAR - AIRPLANE, TOWING AND STEERING | 2 | |
| 15F3300 | TOWBAR - AIRPLANE, TOWING AND STEERING | 2 | |
| 15F3340 | TOWBAR - AIRPLANE, TOWING AND STEERING | 2 | |
| 15MIT65B01231-1 | SPLIT GUIDE - INNER CYLINDER UPPER BEARING, BODY LANDING GEAR | 5 | |
| 15O5332 | 750 BORE TAPERED BEARING | 1 | |
| 160200-9Z000 | ATTENDANT SEAT LH SPRING R/I T | 12 | |
| 160200-9Z003 | ATTENDANT SEAT RH SPRING R/I T | 12 | |
| 161-1962 | SOLDERING IRON | 1 | |
| 161A1188-3 | PIN ASSY - FORWARD TRUNNION BEARING | 1 | |
| 161A1188-9 | PIN ASSY - FORWARD TRUNNION BEARING | 1 | |
| 16480-101 | NLG STEERING MANIFOLD | 4 | |
| 16480â?101 | LNG STEERING MANIFOLD | 4 | |
| 16650-101 | STEERING CTL MODULE | 3 | |
| 169481-2 | TAND SPRING HANDZNG | 1 | |
| 16A11738L1-1 | PULLER ASSEMBLY, BEARING - MOUNT, POWER DRIVE UNIT | 1 | |
| 16A24115L1-1 | Bearing Driver | 1 | |
| 16U13506L1-1 | NOSEWHEEL STEERING COMMAND POTENTIOMETER ADAPTER | 1 | |
| 17008-113 | ROD BEARING INST. TOOL | 1 | |
| 1702B | HOLDER-BALL BEARING | 1 | |
| 1716P-1 | Hand CRIMP TOOL SPECIAL PURPOSE Mfg: Daniels Manufacturing (DMC) | 3 | |
| 171T20041-401 | PANTOGRAPHIC DOLLY, INSTL / RMV - WING-TO-FUSELAGE FAIRING | 1 | |
| 1722A35 | SPRING CLIP HOLDING CAP. DIA. 5/8-1"1/4 WHITE PLASTIC-COATED STEEL | 1 | |
| 173799W | MOVABLE VAPOR EXTRACTION AND FILTERING UNIT | 1 | |
| 1778299 | BEARING END CLAMP | 1 | |
| 17ME65B00116-18 | ROD END BEARING | 1 | |
| 17MIT65B00713 | MOTORING KIT - JT9D ENGINE | 1 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 17TES0200 | AUDIO MONITORING | 1 | |
| 17TES0900 | FUSELAGE FAIRING SET, RECORDER DATA INTERFACE - SRVIVR25 | 1 | |
| 1865AGE1 | POWER CONTROL MODULE REPARING KIT | 1 | |
| 188A | MDCD-UPPER MAIN/AUX SILL SPLICE//STRINGER | 5 | |
| 189A | MDCD-UPPER MAIN/AUX SILL SPLICE/STRINGER | 1 | |
| 18C1216 | EXPANDER RING | 1 | |
| 18C1505 | STAND, ASSY - NO. 1 & 2 BEARING MODULE | 1 | |
| 18C1508 | FIXTURE, HOLDING - NO. 1 BEARING AFT INNER RACE | 1 | |
| 18C1619 | BRACKET SET, UPPER GROUND HANDLING - AFT MOUNT RING | 1 | |
| 18C1620 | BRACKET SET, LOWER GROUND HANDLING - AFT MOUNT RING | 1 | |
| 18C8302 | PULLER, MAT RING, AXIS-D | 1 | |
| 18MIT65B01211-1 | SPLIT GUIDE - INNER CYLINDER, UPPER BEARING, WING LANDING GEAR | 4 | |
| 19-366 | HEAVY DUTY BEARING COUNTERSINK CAG | 1 | |
| 1900184 | MANIFOLD BEARING ASSY. | 1 | |
| 1900186 | SPRING-CYL BLOCK,RETAINER & DRIVE SHAFT ASSY TOOL | 1 | |
| 1900260 | FORMING DOLLY,BACK-UP RING | 1 | |
| 1900281 | BEARING DRIVER | 1 | |
| 1900550 | CYLINDER BLOCK SPRING COMPRESSOR | 1 | |
| 1900973 | Bearing Standing Tool | 1 | |
| 1901110 | EDP MATING RING EXTRACTOR | 1 | |
| 191-C2030 | Mitutoyo 191-C2030 - Crysta-Apex C Coordinate Measuring Machine | 1 | |
| 191-S9106 | Mitutoyo 191-S9106 - Crysta-Apex S Coordinate Measuring Machine | 1 | |
| 192-1 | SOLDERING TESTER | 2 | |
| 194420 | Henkel 97131 LOCTITE Vari-Drop Applicator with 14 Feedline Tubing and two Spring Guards | 1 | |
| 195-004 | WINDSHIELD COVER, w/ fwd extension to cover cowl ring gap | 1 | |
| 195-007 | CANOPY COVER, Wrap-Around, 24" fwd extension to cover cowl ring gap | 1 | |
| 195-009 | CANOPY COVER, over-top, 24" fwd ext to cover cowl ring gap, gas cap ext. | 1 | |
| 195-010 | CANOPY COVER, over-top, 24" fwd ext to cover cowl ring gap, gas cap ext. & under belly cowl ring gap mesh covering | 1 | |
| 195-117 | ENGINE COWL RING GAP COVER, fully enclosed | 1 | |
| 195-830 | TRAVEL COVER, Light Weight Canopy Cover, Wrap-Around, 24" fwd extension to cover cowl ring gap | 1 | |
| 195-840 | TRAVEL COVER, Light Weight Canopy Cover, over-top, 24" fwd ext to cover cowl ring gap, gas cap ext. | 1 | |
| 195-850 | TRAVEL COVER, Light Weight Canopy Cover, over-top, 24" fwd ext to cover cowl ring gap, gas cap ext. & under belly cowl ring gap mesh covering | 1 | |
| 196-683 | Mitutoyo 196-683 - Crysta-Plus M Coordinate Measuring Machine | 1 | |
| 196-T0063-401 | DEVICE, MEASURING GAP - NLG STRUT | 1 | |
| 196-T0073-401 | DEVICE, STEERING AD-JUSTMENT - NLG | 1 | |
| 196-T0197-401 | Device Assy, Bearing RMV - INSTL - MLG | 1 | |
| 196T07910-401 | ADAPTER, LIFT - AFT FAIRING PYLON | 1 | |
| 1986K16 | COMPRESION SPRING 1/2ÕÕ OD X .047 WIRE SST | 1 | |
| 199-18 | CLEVELAND WHEEL & BRAKE 199-18 KIT O-RING EXTRACTION TOOL | 4 | |
| 19X4 | O'RING EPDM 19X4 | 1 | |
| 1A/NIV-L-280 | HAKKO-484-DSOLDRING STATION | 1 | |
| 1B0576 | PLATE-RING FAN DUCT | 1 | |
| 1C5678 | ADAPTER, PULLER - SEAL, NO. 6R BEARING | 1 | |
| 1C5691 | PULLER - NO. 6R BEARING INNER RACE AND SEAL | 1 | |
| 1C5691G04 | Puller, No. 6R Bearing Inner Race and Rotating Oil Seal | 1 | |
| 1C5702 | PUSHER- NO 6 BEARING AND SEAL RACE | 1 | |
| 1C5702G01 | PUSHER, NO. 6R BEARING AND SEAL RACE | 1 | |
| 1C6487 | DRIVE SET - ARBOR PRESS, BEARING REMOVAL | 1 | |
| 1C6806P06 | HALF RING OF TRUCK, TRANS AND STORAGE - PT ROTO | 1 | |
| 1C6898G01 | PINS GUIDE - BEARING/SEAL INSTALLATION | 1 | |
| 1C6950P33 | NO.5 BEARING DUMMY RACE BRAND (GE) | 1 | |
| 1C8011 | PIILOT GUIDE - NO. 5R BEARING | 1 | |
| 1C8011G01 | PIILOT GUIDE - NO. 5R BEARING | 1 | |
| 1C8065G01 | FIXTURE ASSEMBLY - ALIGNMENT NO. 5 AND NO. 6 BEARING | 1 | |
| 1C8312G01 | TOOL SET, REMOVE HIGH PRESSURE COMPRESSOR ROTOR STAGE 1 AND 2 RETAINING RING | 1 | |
| 1C9318G01 | FIXTURE, INSTALL/REMOVE - RETAINER RING LPT/MID SHAFT | 1 | |
| 1C9401P01 | COLLAR MID SHAFT, CENTERING AND SUPPORT | 1 | |
| 1C9435G01 | RING, SHIM - HPT STAGE 1 NOZZLE SUPPORT (DLE ONLY) | 1 | |
| 1C9618G01 | Fixture, Install/Remove - Retainer Ring LPT/Mid-Shaft | 1 | |
| 1J12314 | Ring, Dummy | 1 | |
| 1J12503 | pusher, hydraulic-bevel gear, No.3 bearing, intermediate | 1 | |
| 1P01131410 | MEASURING DISK | 1 | |
| 1P16062 | RING, SUPPORT - ROTOR, HPT SECOND STAGE BLADES | 1 | |
| 1R18027 | INDEXING RING | 1 | |
| 1R18664 | containment ring - Machine the Stator Vane Tips and the Rotor Path Ring Liners | 1 | |
| 1R18668 | containment ring - Machine the Stator Vane Tips and the Rotor Path Ring Liners | 1 | |
| 1R18670 | containment ring - Machine the Stator Vane Tips and the Rotor Path Ring Liners | 1 | |
| 1STE 43115-13-818 | ADAPTER RING | 1 | |
| 1X54170008 | BEARING DRIVER | 1 | |
| 1X54170009 | BEARING DRIVER | 1 | |
| 1X56176798 | GUIDE RING | 1 | |
| 1X56176799 | GUIDE RING | 1 | |
| 2-014V884-75 | O-RING VITON 75D 5/8IN | 1 | |
| 2-130V884-75 | O-RING VITON 75D 1-13/16 IN | 1 | |
| 2-344N70 | O RING TORE 5.33MM ID 97.79MM | 1 | |
| 2-435N70 | O RING TORE 6.99MM ID145.42MM | 1 | |
| 2-6374-6 | BEARING CUP DRIVER | 1 | |
| 2-6544-18 | Inboard Bearing Cup Driver (chilling tool) | 1 | |
| 2-6544-18PM | INBOARD BEARING CUP DRIVER (CHILLING TOOL) | 1 | |
| 2-6544-2 | BEARING CUP DRIVER | 1 | |
| 2-8080-19 | OUTBOARD BEARING CAP DRIVER | 1 | |
| 2-8080-2 | Outboard Bearing Cup Driver (chilling tool) | 1 | |
| 2-8080-20 | OUTBOARD BEARING CUP DRIVER (CHILLING TOOL) | 1 | |
| 2-8080-22 | BEARING CUP DRIVER | 1 | |
| 2-8080-25 | BEARING CUP DRIVER | 1 | |
| 2-8080-28 | OUTBOARD BEARING CUP DRIVER (CHILLING TOOL) | 1 | |
| 2-8080-29 | THE INBOARD BEARING CUP DRIVER (CHILLING TOOL) | 2 | |
| 2-8080-31 | OUTBOARD BEARING CUP ( 2IT) | 3 | |
| 2-8080-44 | BEARING CUP DRIVER - OUTBOARD | 1 | |
| 2-8080-5 | OUTBOARD BEARING CUP DRIVER | 1 | |
| 2-8080-50 | CUP,DRIVER-INBOARD BEARING | 1 | |
| 2-8080-53 | DRIVER BEQARING CUP | 2 | |
| 2-8080-54 | OUTBOARD BEARING CUP DRIVER | 1 | |
| 2-8080-55 | CUP,DRIVER-OUTBOARD BEARING | 1 | |
| 2-8080-56 | INBOARD BEARING CAP DRIVER | 1 | |
| 2-8080-57 | OUTBOARD BEARING CUP DRIVER | 1 | |
| 2-8080-58 | INBOARD BEARING CUP DRIVER (CHILLING TOOL) | 1 | |
| 2-8080-6 | INBOARD BEARING CUP (2 IT) | 2 | |
| 2-8080-61 | THE OUTBOARD BEARING CUP DRIVER (CHILLING TOOL) | 2 | |
| 2-8080-62 | INBOARD BEARING CUP DRIVER | 1 | |
| 2-8080-63 | OUTBOARD BEARING CUP DRIVER | 1 | |
| 2-8080-64 | BEARING CUP DRIVER - INBOARD | 1 | |
| 2-8080-65 | BEARING CUP DRIVER - OUTBOARD | 1 | |
| 2-8080-69 | BEARING CUP DRIVER OUTBOARD | 1 | |
| 2-808031 | OUTBOARD BEARING CUP DRIVER | 3 | |
| 2-832-01-3220 | RING PROBE, INSIDE DIA 12.5 MM | 1 | |
| 2-832-01-3235 | RING PROBE, INSIDE DIA.18 MM | 1 | |
| 2-832-01-3240 | PROBE-RING INSIDE DIA.20MM | 1 | |
| 2.009 | O'RING 5.28mm1D X 1.78mmTORE en EPDM | 1 | |
| 2.012 | O'RING 9.24mmID X 1.78mmTORE en EPDM | 1 | |
| 2.832.01-3220 | Ring probe DA=12.5 DB=30 | 1 | |
| 2.832.01-3230 | Ring probe DA=16 DB=30 | 1 | |
| 2.832.01-3235 | Ring probe DA=18 DB=29 | 1 | |
| 20-14700 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) | 1 | |
| 20-6138 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-6200 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-6208 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-6255 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-6283 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-K0 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-K1 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 2 | |
| 20-K30 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-K32 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 20-K7 | Jacobs® Plain Bearing Chucks and Chuck Keys (Key number: K30) (Model - pilot size: Jacobs® Plain Bearing Chuck) (Mount thread - style: 3/8-24 - Fluted) (Ref no. - capacity: 41BA - 3/8") (Add to cart: Add To Cart) (Key number: K32) (Model - pilot size: Jac | 1 | |
| 200-7693 | SOLDERING IRON | 1 | |
| 2000-6 - DREMEL | GAS SOLDERING IRON VERSATIP 2000-6 - DREMEL | 1 | |
| 2000000-254 | PALLET TRACK STUD CENTERING TOOL | 1 | |
| 2000A1751K01 | RUBBER RING ( PN DESATIVADO PELA B-TEC 32-02/12) | 2 | |
| 200470-1 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| 200470-5 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| 200910-CA-24 | WELDED RING | 1 | |
| 20152-35 | Our Fixed Height Tripod Jacks are used on and for specific aircraft jacking applications during norm | 1 | |
| 201S4002‑031‑001 | SACHEON AEROSPASE MANUFACTURING IND. CO | 1 | |
| 2024333-1 | BEARING REMOVAL ADAPTER | 1 | |
| 2024435-1 | BEARING DRIVER | 1 | |
| 2024476-1 | BEARING AND RETAINER SUPPORT | 1 | |
| 2024627-1 | BEARING DRIVER | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 203026-101 | TGB BEVEL GEAR - REFERENCE STANDARD, CALIBRATION RING EWR | 1 | |
| 204-096 | ORING:, DSP450 | 2 | |
| 204-097 | ORING:, DSP500 | 2 | |
| 20400TAAI993000-05 | SPRING PLIERS TO REMOVE AND FIT CIRCLIP ON SEATS | 1 | |
| 204A | Moore & Wright Radius Gauge Ring 16 piece 9/32"-33/64" | 1 | |
| 204M | Moore & Wright Radius Gauge Ring 18 piece 0.75-5mm | 1 | |
| 204MA | Moore & Wright Radius Gauge Ring 16 piece 5.5 - 13mm | 1 | |
| 204MR | Moore & Wright Retail Pack Radius Gauge Ring, 0.75-5mm | 1 | |
| 204R | Moore & Wright Retail Pk Radius Gauge Ring, 1/32-17/64" | 1 | |
| 20507-2 | DUMMY PIN-NLG STEARING COLLEER | 1 | |
| 20507-3 | DUMMY PIN-NLG STEARING COLLEER | 1 | |
| 206-SP-F-02 | PRESSING PLUG, DUPLEX BEARING | 1 | |
| 208-106 | EXHAUST PLUG, STANDARD FAIRING | 1 | |
| 208-200 | EXHAUST COVER (no deflector/fairing) | 1 | |
| 208-205 | EXHAUST COVER (with deflector/fairing) | 1 | |
| 208080-58 | INBOARD BEARING CUP DRIVER | 1 | |
| 209-572 | DIGITAL MEASURING GAUGE, CGDO 20MM/.78" | 1 | |
| 20DAN | SPRING BALANCE 20DAN (48LBF) TOOL | 1 | |
| 20MIT65B00713 | MOTORING KIT - JT9D ENGINE | 1 | |
| 20MIT65B00713-2 | MOTORING -0 JT9D ENGINE | 1 | |
| 20X-10-01 | TAG, CIRCUIT BREAKER (RED RING) | 1 | |
| 20X3 | O'RING EPDM 20X3 | 1 | |
| 21-1EY475AB | CARGO DOOR SPRING TOOL | 1 | |
| 211C223-175CC1 | Spring Adjust Tool | 1 | |
| 212-92049.1 | Nose landing gear steering pressure test kit | 1 | |
| 212-92052.1 | Nose Landing Gear Steering Purging Hose | 1 | |
| 212-FB | Rolo-Flair® 37° Rotary Flaring Tool (Maximum torque: Copper & Aluminum Alloys) (Sizes: 1/8", 3/16", 1/4", 5/16", 3/8") (Add to cart: Add To Cart) | 3 | |
| 2129M68G02 | CARBON SEAL & MATING RING INSTALLATION AND REMOVAL KIT | 1 | |
| 2129M69G02 | CARBON SEAL & MATING RING INSTALLATION AND REMOVAL KIT | 1 | |
| 212FB | FLAIRING TOOL-PARKER 37 DEG. | 3 | |
| 214030-1 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| 2146.10.35.00 | MOUNTING AID CENTERING RING | 1 | |
| 215030-1 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| 2189070F1 | Bearing Press And Stake Fixture | 1 | |
| 21C7044G01 | SEAL RUNNER AND NO. 1 BEARING INNER RACE HYDRAULIC PULLER | 1 | |
| 21C7250G01 | NO 3 BEARING GUIDE ADAPTER | 1 | |
| 21C7773P01 | NO. 3 BEARING BALL RETAINER ADAPTER | 1 | |
| 21C7877G01 | DEAL MATING RING PULLER | 1 | |
| 21C8118G01 | PUSHER NO 1 AND NO 3 BEARING INNER RING | 1 | |
| 21C8129G01 | PUSHER FRONT FRAME CARBON SEAL AND RING | 1 | |
| 21C8886G01 | TORQUE ADAPTER HORIZONTAL NO 1 BEARING | 1 | |
| 21ME65B00713-1 | BEAM AND TROLLEY - NUMBER 4 BEARING TOOLS, ON-WING MAINTENANCE, JT9D ENGINE | 1 | |
| 21SN04-CC24 | MICROSWITCH CENTERING TOOL(DEPTH MICROMETER) | 2 | |
| 22-17-90003 | DISTANCE RING, HEIGHT 6MM | 1 | |
| 220-10CMH2O | PRESSURE MONITORING DEVICE - 0-5 PSIG (0-138 INCHES OF WATER) (0-35 KPA) | 1 | |
| 22033-00 | ADAPTER SUPPORT, MADE OF STEEL, USED DURING AIRCRAFT REPAIRS. | 1 | |
| 2234641-008 | CF CARD - FOR DATA RECORDERING ON WQAR UNIT | 2 | |
| 226B | DEBURRING TOOL | 1 | |
| 5.32 | 32MM HEAVY DUTY RING SPANNERS | 1 | |
| 5.5 | 50MM HEAVY DUTY RING SPANNERS | 1 | |
| 5.55 | 55MM HEAVY DUTY RING SPANNERS | 1 | |
| 5.7 | 70MM HEAVY DUTY RING SPANNERS | 1 | |
| 5.75 | 75MM HEAVY DUTY RING SPANNERS | 1 | |
| 23 | Tesa 00530421 TWIN-CAL IP67 – Models with rounded measuring faces for internal dimensions Digital Calipers 0-200mm / 0-8" | 1 | |
| 203 | Reducer PN#ASD1203 for TB3/TB125. Includes balllock pin for securing red | 7 | |
| 204 | Moore & Wright Radius Gauge Ring 16 piece 1/32"-17/64" | 1 | |
| 2118.84 | KELVIN PROBES PISTOL GRIP 10 FT (25 A, SPRING LOADED) | 1 | |
| 20780 | SCATTERING BODY (OBSCURATION RATE BETWEEN 3 AND 5)”, LABYRINTH | 1 | |
| 21873 | SPRING-DETENT | 1 | |
| 22264 | DOWEL FOR RING | 1 | |
| 200281 | SPECIAL ADJUSTMENT RING | 1 | |
| 200855 | SPECIAL ADJUSTING RING | 1 | |
| 229682 | PPG Semco 229682 Model 550 20 oz O-Ring | 1 | |
| 23-1 | NEEDLE BEARING INSTALLER TOOL | 3 | |
| 23-JAN | NEEDLE BEARING INSTALLER TOOL | 1 | |
| 23006778- | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 2309-S084-401 | BEARING PROTECTION DEVICE | 1 | |
| 231-5332 | SOLDERING IRON, LOW VOLTAGE | 1 | |
| 231-5348 | SILDERING IRON | 1 | |
| 231-5360 | SOLDERING IRON - 50W | 1 | |
| 2315T381 | WATER RESISTANT PHENOLIC WHEEL WITH ROLLER BERING, 6" DIAMETER X2" WIDE, FOR 1/2" AXLE | 1 | |
| 23301 | ADB 1/2"-13 X 1.07" SAFETY ENGINEERED SWIVEL HOIST RING - 2500 LBS | 1 | |
| 23343 | MANDREL-FOR RING ON LEVEL | 1 | |
| 23344 | MANDREL-FOR RING ON LEVER | 1 | |
| 232991 | PPG Semco 232991 Red Plastic Syringe Tip Cap | 1 | |
| 233456ST2 | DIE SWAGING/STAKING TOOLS: MKP3A BEARINGS AND MKP4FS BEARINGS | 1 | |
| 235.1000 | SPRING TESTER-SPRING ADAPTER (KUNZ) | 1 | |
| 23867 | MANDREL FOR FITTING RINGS | 1 | |
| 234350 | HAND TOOL TO SPREAD SEALANT ON FAIRINGS | 5 | |
| 235.1000 (KUNZ) | SPRING TESTER-SPRING ADAPTER | 1 | |
| 2351-50 | MEASURING CYLINDER | 1 | |
| 235508-15 | SPRING MATCHED PART, USED WITH ITEM NUMBER 240 | 1 | |
| 2370-S023-401 | SWAGING BEARING DEVICE | 1 | |
| 2370-S142-401 | SWAGING BEARING DEVICE | 1 | |
| 2370-S158-401 | DOWNLOCKING SPRING LOAD CHECK DEVICE | 1 | |
| 2370-S730-401 | DOWNLOCKING SPRING MOUNTING DEVICE | 1 | |
| 2370-S741-401 | STEERING MOTOR DEVICE | 1 | |
| 2370-T070-401 | NLG AND MLG SPRING | 6 | |
| 240056 | PPG Semco 240056 Model 250-B Retainer GuardRing | 1 | |
| 242011-7 | HELICAL HAND SPIKES WITH SPRING POINTS | 4 | |
| 244689 | CAPSCREW, JACK OFF FRONT SUPPORT RING FROM FAN DISC | 4 | |
| 244689-2 | CAPSCREW, JACK OFF SUPPORT RING FROM FAN DISC | 5 | |
| 246100-78A | STORING DEVICE | 1 | |
| 2464M88P01 | SEAL, ROTATING, AIR AND OIL, NO. 4 BEARING, FORWAR | 1 | |
| 2488-20 | MILWAUKEE M12 SOLDERING IRON KIT 2488-20 | 1 | |
| 24AC62 | SOLDERING STATION, 50W,220V | 1 | |
| 2517000F106 | STAKING TOOL, ROD END BEARING | 1 | |
| 25325A14 | 53-PIECE THREAD REPAIRING TAP, DIE, AND FILE ASSORTMENT | 1 | |
| 253626-1 | Holder, Bearing Press | 1 | |
| 253648-3 | BEARING COMPRESSOR DRIVER | 1 | |
| 253830 | Bearing Press Holder | 1 | |
| 2542A41 | FILE-THREAD RESTORING _DIA | 1 | |
| 2558546TE | DRIVER, IB / OB BEARING CUP INSTALLATION | 1 | |
| 2558607TE | DRIVER, BEARING CUP REMOVAL | 1 | |
| 2558608TE | DRIVER, BEARING CUP INSTALLATION, IB | 1 | |
| 2558609TE | DRIVER, BEARING CUP INSTALLATION, OB | 1 | |
| 2558817TE | BEARING CUP REMOVAL (IN) 2558819 AND | 1 | |
| 2559 | SPRING LOATED EXTRACTION TOOL | 3 | |
| 25630P-01 | HEADBAND SPRING | 2 | |
| 25630P01 | HEADBAND SPRING | 2 | |
| 257622 | Bearing Driver | 1 | |
| 257622PM | BEARING DRIVER | 1 | |
| 257944-1 | Driver, Bearing | 1 | |
| 257T4330-1 | CAM CENTERING DRIVER ASSY | 1 | |
| 259-109-10X-SSS | SOFTWARE- ADVANCED AIRBORNE VIBRATION MONITORING EQUIPMENT | 1 | |
| 25B19283 | O RING INSTALLING GAGE DITTING TO BULKHEAD NUT | 1 | |
| 25G3178001-001 | ANCHORING SUPPORT FOR TAIL STAND | 3 | |
| 25X2 | O'RING EPDM 25X2 | 1 | |
| 26-1043 | Sleeved & Spring Flush Sets (Shank: 3/16") (Inside diameter: 3/8") (Outside diameter: 9/16") (Add to cart: Add To Cart) | 1 | |
| 26-1044 | Sleeved & Spring Flush Sets (Shank: 3/16") (Inside diameter: 3/8") (Outside diameter: 9/16") (Add to cart: Add To Cart) (Shank: 1/4") (Inside diameter: 3/8") (Outside diameter: 9/16") (Add to cart: Add To Cart) | 1 | |
| 26-1045 | Sleeved & Spring Flush Sets (Shank: 3/16") (Inside diameter: 3/8") (Outside diameter: 9/16") (Add to cart: Add To Cart) (Shank: 1/4") (Inside diameter: 3/8") (Outside diameter: 9/16") (Add to cart: Add To Cart) (Shank: 3/16") (Inside diameter: 19/64") (Ou | 1 | |
| 26-1046 | Sleeved & Spring Flush Sets (Shank: 3/16") (Inside diameter: 3/8") (Outside diameter: 9/16") (Add to cart: Add To Cart) (Shank: 1/4") (Inside diameter: 3/8") (Outside diameter: 9/16") (Add to cart: Add To Cart) (Shank: 3/16") (Inside diameter: 19/64") (Ou | 1 | |
| 261-125-000E | WIRING DIAGRAM TEST UNIT | 1 | |
| 261-137-000 | WIRING DIAGRAM TEST UNIT | 1 | |
| 261-154-000E | WIRING DIAGRAM TEST UNIT | 1 | |
| 261-156-000E | WIRING DIAGRAM TEST UNIT | 1 | |
| 2610181-4 | WHEEL AND BEARING PROTECTOR SET (A330 MAIN) ORANGE | 3 | |
| 2610611-700 | SLEEVED & SPRING FLUSH SETS (SHANK: 3/16 | 1 | |
| 26385-0166 | NEEDLE BEARING | 1 | |
| 26388-0015 | BEARING NEEDLE HD | 1 | |
| 26388-0106 | BEARING NEEDLE | 1 | |
| 264362-1-1 | BEARING DRIVER | 1 | |
| 269A9212 | Spud - 269A1231 Bearing Set Install | 1 | |
| 269A9221 | Punch & Drift Bearing Install | 1 | |
| 269T9284 | Installation Tube Upper Forward Bearing | 2 | |
| 269T9284P | INSTALLATION TUBE UPPER FWD BEARING | 1 | |
| 269T9331 | Idler Pulley Bearing Locknut Installation | 1 | |
| 27-1-4730 | WAR MEASURING FLAP DRIVE | 1 | |
| 270-00944 | WIRING DIAGRAM, AIR INLET TEST FIXTURE | 1 | |
| 2705-4 | HELICOIL THREAD REPAIRING TOOL 1/4" UNF | 2 | |
| 270A | RIVET GUN AND SPRING | 2 | |
| 2739A59 | DEBURRING TOOL | 1 | |
| 278-1T4 | PUMP SHAFT CENTERING MANDRIL | 1 | |
| 2784M64P08 | DATA MONITORING PROGRAM | 1 | |
| 279194-52 | SPRING COMPRESSOR GUIDE | 1 | |
| 28-0-1857 | SPRING BALANCE ADAPTER | 2 | |
| 28-0-4225 | STANDARD TOOLS SPRING BALANCE | 1 | |
| 28-0-8019 | OUTBOARD BEARING CAP DRIVER | 1 | |
| 28-0-8050 | BEARING CUP DRIVER | 1 | |
| 28-04225 | STANDARD TOOLS SPRING BALANCE | 1 | |
| 28.00.9001.190.000 | PULLER FOR THE MAIN LANDING GEAR BEARING | 1 | |
| 281-752 | SPRING BALANCE DINAMOMETER KERN SCALE | 1 | |
| 2821-0005 | THREADED RING | 1 | |
| 284045-1-1 | PULLER ASSEMBLY, BEARING AND BUSHING | 1 | |
| 284065-1-1 | DRIVER, BEARING (DRIVER) | 1 | |
| 284080-1-1 | BEARING END PLAY GAGE | 1 | |
| 284184-1-1 | BEARING AND BUSHING DRIVER | 1 | |
| 284310-1-1 | DRIVER BEARING AND BUSHING | 2 | |
| 284314-1-1 | BEARING, DUMMY | 1 | |
| 284362-1 | BEARING DRIVER | 2 | |
| 284362-1-1 | BEARING DRIVER | 2 | |
| 284362-1-1PM | BEARING DRIVER | 1 | |
| 284362-1-F | BEARING DRIVER (3IT) | 1 | |
| 284362-3-1 | Bearing Driver | 1 | |
| 284362-4-1 | BEARING DRIVER | 1 | |
| 284475-1-1 | BEARING AND BUSHING DRIVER | 1 | |
| 284846-1-1 | HOLDER TURBINE WHEEL BEARING PRESS | 2 | |
| 285083-1-1 | HOLDER RING GEAR | 1 | |
| 285160-2-1 | DUMMY BEARING CARRIER ASSY | 1 | |
| 285162-1-1 | BEARING AND BUSHING DRIVER | 1 | |
| 285163-1-1 | Bearing And Bushing Driver | 1 | |
| 285179-1-1 | Bearing And Bushing Driver | 1 | |
| 285180-1-1 | Bearing And Bushing Driver | 1 | |
| 285181-1-1 | BEARING AND BUSHING DRIVER | 1 | |
| 285200-3-1 | RETAINING RING DRIVER | 1 | |
| 285391-1-1 | Holder, Bearing Press | 1 | |
| 285585-1-1 | Turbine Wheel Bearing Pressing Holder | 1 | |
| 285640-1-1 | RING INSTALLING HOLDER | 2 | |
| 285640-4 | RING HOLDER FIXTURE | 1 | |
| 285776-1-1 | Bearing and Bushing Driver | 1 | |
| 285777-1-1 | Bearing Driver | 1 | |
| 285812-1-1 | Bearing Pressing Holder | 1 | |
| 36 | Tennsmith® Squaring Shears (Capacity (mild/stainless): 16 / 20 ga.) (Maximum cutting length: 37") (Gauge ranges (back/front): 30" / 37") (Shipping weight: 700 lbs (318 kgs)) (Add to cart: Add To Cart) | 1 | |
| 52 | Tennsmith® Squaring Shears (Capacity (mild/stainless): 16 / 20 ga.) (Maximum cutting length: 37") (Gauge ranges (back/front): 30" / 37") (Shipping weight: 700 lbs (318 kgs)) (Add to cart: Add To Cart) (Capacity (mild/stainless): 16 / 20 ga.) (Maximum cutt | 5 | |
| 325 | DEBURRINE CHAMPERING KIT | 2 | |
| 412 | CURVED-TIP SYRINGE | 1 | |
| 440.22 | 3/8DR X 22MM CROW RING SPANNER | 1 | |
| 440.4 | 1/2DR X 40MM CROW-RING SPANNER | 1 | |
| 503 | Moore & Wright Spring Divider 3"/75mm | 1 | |
| 504 | Moore & Wright Spring Divider 4"/100mm | 1 | |
| 506 | Moore & Wright Spring Divider 6"/150mm | 4 | |
| 508 | Moore & Wright Spring Divider 8"/200mm | 1 | |
| 513 | Moore & Wright Spring Inside Caliper 3"/75mm | 1 | |
| 514 | Moore & Wright Spring Inside Caliper 4"/100mm | 2 | |
| 516 | Moore & Wright Spring Inside Caliper 6"/150mm | 1 | |
| 518 | Moore & Wright Spring Inside Caliper 8"/200mm | 1 | |
| 523 | Moore & Wright Spring Outside Caliper 3"/75mm | 1 | |
| 524 | Moore & Wright Spring Outside Caliper 4"/100mm | 1 | |
| 525 | THREATED ROSEBUD DEBURRING BIT | 3 | |
| 526 | Moore & Wright Spring Outside Caliper 6"/150mm | 1 | |
| 528 | Moore & Wright Spring Outside Caliper 8"/200mm | 1 | |
| 794 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| 811 | COMPRESSION SPRING, 1.375"OD X 4.5" LG | 1 | |
| 882 | 882-BIT HOLDER RETAINING RING FOR DRIVER (BETA) | 1 | |
| 2839 | PISTON RING COMPRESSOR FLEXIBLE BAND TYPE FOR 5 AND 5-1/4 BORE ENGINES | 1 | |
| 3539 | CLOTH CLAMPS , TO HOLD PLEATS DURING FOLDING | 4 | |
| 3602 | VALVE SPRING COMPRESSOR TOOL, ENGINE CYLINDER ASSEMBLY | 1 | |
| 3618 | PISTON RING COMPRESSOR FLEXIBLE BAND TYPE FOR 4-7/16 BORE ENGINES | 1 | |
| 3762 | GUIDE PIN - COMPRESSOR ROTOR FRONT BEARING CAP | 3 | |
| 4010 | O-RING CARRE .239IDX.375ODX0.70THICK | 1 | |
| 4214 | PROTO PULLER (USED TO REMOVE BEARINGS) | 1 | |
| 4328 | Power soldering gun | 1 | |
| 4378 | SOLDERING IRON, 400W | 1 | |
| 4901 | PISTON RING COMPRESSOR FLEXIBLE BAND TYPE FOR 3-7/8 AND 4-1/6 BORE ENGINES | 1 | |
| 5010 | Moore & Wright Spring Divider 10"/250mm | 1 | |
| 5012 | Moore & Wright Spring Divider 12"/300mm | 1 | |
| 5110 | Moore & Wright Spring Inside Caliper 10"/250mm | 1 | |
| 5112 | Moore & Wright Spring Inside Caliper 12"/300mm | 1 | |
| 5117 | WORKING CONDITION MEASURING INSTRUMENT | 1 | |
| 5140 | SOLDERING IRON 600°-800° F | 1 | |
| 5210 | Moore & Wright Spring Outside Caliper 10"/250mm | 1 | |
| 5212 | Moore & Wright Spring Outside Caliper 12"/300mm | 1 | |
| 5304 | RING: WIPER,ROD, | 2 | |
| 5312 | RING: WIPER,1.75IN, FITS JACK MODEL TTJ3 | 2 | |
| 6366 | DMM TEST PROBE (measuring 110V) | 1 | |
| 7430 | SPRING: CASTER,COMPRESSED, | 2 | |
| 7800 | DESOLDERING TOOL | 1 | |
| 7821 | TOOL-HOLDING VALVE DURING ASSEMBLY | 2 | |
| 8053 | NEEDLE BEARING INSTALLERS .750 PILOT | 1 | |
| 8074 | ROSAN LOCK RING INSTALLER, ROSAN STUDS INSTALLATION | 2 | |
| 9202 | NOSE LANDING GEAR STEERING TESTER | 1 | |
| 9460 | SEAL RING GUIDE | 3 | |
| 30100 | ARING 615 PORTABLE DATA LOADER (30100 (S'W VER 4.53 OR GRTR)) | 19 | |
| 34301 | BEARING: CONE,ROLLER,TAPERED, MADE TO CLASS 2 W/CODE 629 | 7 | |
| 38918 | SPRING HOLDER | 1 | |
| 43040 | RING, LOCKOUT, CIRCUIT BREAKER, RED | 1 | |
| 44660 | RING GUIDE | 2 | |
| 47820 | CUP BEARING INBOARD | 14 | |
| 50181 | NOGA OEBURRING TOOL WITH 1 BLADE | 1 | |
| 50264 | SPRING ADJUSTMENT FIXTURE | 1 | |
| 51107 | THRUST BALL BEARING 35ID X 52OD X 12 THICK | 1 | |
| 54009 | RING GUIDE | 1 | |
| 55070 | PUSH ROD BEARING | 1 | |
| 64560 | EXPANDER, PISTON RING | 1 | |
| 64712 | CYLINDER RISE RING PACKAGE | 1 | |
| 64713 | EXPANDER, PISTON RING | 2 | |
| 64906 | PLUG, BEARING, HIGH COMPRESSION CRANKCASE ADQUIRIR | 1 | |
| 65181 | SURFACE RESISTANCE MEASURING PROBE SR2 PROBE DIN 65181 | 1 | |
| 70220 | NON-MARRING PRY WEDGES DESCRIPTION: 3PC POLYETHY | 1 | |
| 70398 | Burraway Deburring Tool Kit | 2 | |
| 75947 | SPRING PIN HD 1/8 X 3/8 | 1 | |
| 79036 | STRAIGHT SINKER FOR DEBURRING 1/8" | 1 | |
| 79086 | STRAIGHT SINKER FOR DEBURRING 1/4" | 1 | |
| 79111 | STRAIGHT SINKER FOR DEBURRING 5/16 | 1 | |
| 79136 | STRAIGHT SINKER FOR DEBURRING 3/8" | 1 | |
| 79161 | STRAIGHT SINKER FOR DEBURRING 1/2" | 1 | |
| 85359 | IMPEDANCE MEASURING PLIERS | 1 | |
| 88657 | Henkel 97208 LOCTITE 10 ml Syringe Airline Adapter - Pack of 2 | 1 | |
| 88678 | Henkel 97245 LOCTITE 30 55 mL Syringe Airline Adapter - Pack of 2 | 3 | |
| 89901 | SPATULA FOR REMOVAL AND FITMENT OF SEALING RINGS | 23 | |
| 90106 | Antenna Coupler Placement Pole 8 ft. & D-Ring | 1 | |
| 90440 | Hearing Protection (Description: Ear Covers) (Add to cart: Add To Cart) | 1 | |
| 90441 | Hearing Protection (Description: Ear Covers) (Add to cart: Add To Cart) (Description: Ear Plugs & Carrying Case) (Add to cart: Add To Cart) | 1 | |
| 266823 | PULLER, MANIFOLD -AB 1 BEARING | 1 | |
| 280988 | HOLDER - BEARING PRESSING | 1 | |
| 281176 | HOLDER - BEARING PRESSING | 1 | |
| 281178 | HOLDER - BEARING PRESSING | 1 | |
| 284310 | DRIVER ASSEMBLY BEARING AND BUSHING | 1 | |
| 286096 | PPG Semco 286096 Model 195 Teflon O-Ring (2 Required) | 1 | |
| 286182 | PPG Semco 286182 Model 195 O-Ring | 1 | |
| 286184 | PPG Semco 286184 Model 195 Viton O-Ring (2 Required) | 1 | |
| 286281 | PPG Semco 286281 Model 272, 276, 507A, 550 O-Ring | 1 | |
| 287031-1 | HOLDER AND DRIVER BEARING INSTALLING | 1 | |
| 287035-1 | DRIVER BEARING AND BUSHING | 1 | |
| 287046-1 | HOLDER AND DRIVER BEARING REMOVAL | 1 | |
| 287076-1 | HOLDER AND DRIVER BEARING INSTALLATION | 1 | |
| 287156-1-1 | BEARING DRIVER PRES | 1 | |
| 287156-1-1TK | Bearing Driver Press | 1 | |
| 287425-1-1 | Bearing Roller Guide | 1 | |
| 287458-1-1 | Housing and Bearing Holder Assembly | 1 | |
| 287553-1 | Expanding Collet Bearing Puller | 1 | |
| 287563-1 | PULLER MECHANIV HUB AND BEARING | 1 | |
| 287647-1 | Rotor Seal and Bearing Puller | 1 | |
| 287720-1 | DRIVER BEARING AND BUSHING | 1 | |
| 287723-1 | DRIVER BEARING AND BUSHING | 1 | |
| 287856-1 | HOOK HELI CAL SPRING PULLER HAND | 1 | |
| 287858-1 | Ring Installation Punch and Die | 1 | |
| 287859-1 | Ring Assembly Drill Fixture | 1 | |
| 287881-1-1 | ALIGNMENT TOOL, BEARING HOUSING AND DIFFUSER | 1 | |
| 287890-1 | Retaining Ring Driver | 1 | |
| 287903-1 | DRIVER AND HOLDER BEARING PRESSING | 1 | |
| 287903-2 | DRIVER AND HOLDER BEARING PRESS | 1 | |
| 287908-1 | HOLDER . DRIVER, BEARING INSTALLING | 1 | |
| 287966-1 | BEARING PRESS DRIVER | 1 | |
| 287996-1 | DRIVER BEARING PRESS | 1 | |
| 289094-1 | DRIVER BEARING AND BUSHING | 1 | |
| 289101-1 | DRIVER SET, BEARING AND BUSHING | 1 | |
| 289105-1 | DRIVER AND HOLDER BEARING INSTALLING | 1 | |
| 289131-1 | DRIVER - HOLDER, BEARING INSTALLING | 1 | |
| 289180-1 | DRIVER AND HOLDER BEARING INSTALLING | 1 | |
| 289239-1 | DRIVER BEARING PRESSING | 1 | |
| 289460-1 | HOLDER AND DRIVER BEARING PRESSING | 1 | |
| 289484-1 | HOLDER AND DRIVER BEARING PRESS | 1 | |
| 289485 | ELECTRONIC BOARD FOR COUNTING TURNS OF LOW SENSOR OF TORQUE TOOL OCEANEERING 289485 | 1 | |
| 289493-1 | DRIVER BEARING PRESS | 1 | |
| 289505-1 | DRIVER BEARING PRESS | 1 | |
| 289558-1 | ADAPTER THRUST SHAFT AND BEARING | 1 | |
| 289696-1 | DRIVER AND HOLDER BEARING PRESS | 1 | |
| 289702-1 | HOLDER BEARING PRESSING | 1 | |
| 289703-1 | HOLDER AND DRIVER RING SWAGING | 1 | |
| 289856-1 | DRIVER AND HOLDER BEARING PRESS | 1 | |
| 29-00515-04 | DISTANCE RING | 1 | |
| 29-07 | SPLIT RINGS 21mmODX18mmIDX3mmTH. STEEL ZINC | 1 | |
| 291115-1 | Bearing Lapping Tool Driver | 1 | |
| 291121-1 | HOLDER AND DRIVER RING INSTALLING | 1 | |
| 291140-1 | Bearing And Bushing Driver | 1 | |
| 291141-1 | Bearing And Bushing Driver | 1 | |
| 291270-1 | HOLDER ASSEMBLY SHAFT SPRING LOADING | 1 | |
| 291299-1 | GUIDE AND DRIVER RETAINING RING | 1 | |
| 291345-1 | DRIVER SET BEARING GEAR SHAFT | 1 | |
| 291354-1 | DRIVER SET BEARING SEAL | 1 | |
| 291711-1 | BLEED AIR FLOW MEASURING SET | 1 | |
| 291743-1 | Bearing Driver | 1 | |
| 291756-1 | RETAINING RING GUIDE | 1 | |
| 291828-1 | BEARING SUPPORT CONCEN- TRICITY AND PARALLELISM GAGE | 1 | |
| 29218.RI.I19 | Norbar 29218.RI.I19 - 1 3/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I20 | Norbar 29218.RI.I20 - 1 1/4" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I21 | Norbar 29218.RI.I21 - 1 5/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I22 | Norbar 29218.RI.I22 - 1 3/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I23 | Norbar 29218.RI.I23 - 1 7/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I24 | Norbar 29218.RI.I24 - 1 1/2" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I25 | Norbar 29218.RI.I25 - 1 9/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I26 | Norbar 29218.RI.I26 - 1 5/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I27 | Norbar 29218.RI.I27 - 1 11/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I28 | Norbar 29218.RI.I28 - 1 3/4" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I29 | Norbar 29218.RI.I29 - 1 13/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I30 | Norbar 29218.RI.I30 - 1 7/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I31 | Norbar 29218.RI.I31 - 1 15/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I32 | Norbar 29218.RI.I32 - 2" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I33 | Norbar 29218.RI.I33 - 2 1/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I34 | Norbar 29218.RI.I34 - 2 1/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I35 | Norbar 29218.RI.I35 - 2 3/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I36 | Norbar 29218.RI.I36 - 2 1/4" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I37 | Norbar 29218.RI.I37 - 2 5/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I38 | Norbar 29218.RI.I38 - 2 3/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I39 | Norbar 29218.RI.I39 - 2 7/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I40 | Norbar 29218.RI.I40 - 2 1/2" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I41 | Norbar 29218.RI.I41 - 2 9/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I42 | Norbar 29218.RI.I42 - 2 5/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I43 | Norbar 29218.RI.I43 - 2 11/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I44 | Norbar 29218.RI.I44 - 2 3/4" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I45 | Norbar 29218.RI.I45 - 2 13/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I46 | Norbar 29218.RI.I46 - 2 7/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I47 | Norbar 29218.RI.I47 - 2 15/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I48 | Norbar 29218.RI.I48 - 3" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I49 | Norbar 29218.RI.I49 - 3 1/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I50 | Norbar 29218.RI.I50 - 3 1/8" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I51 | Norbar 29218.RI.I51 - 3 3/16" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.I52 | Norbar 29218.RI.I52 - 3 1/4" AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M30 | Norbar 29218.RI.M30 - 30mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M31 | Norbar 29218.RI.M31 - 31mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M32 | Norbar 29218.RI.M32 - 32mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M33 | Norbar 29218.RI.M33 - 33mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M34 | Norbar 29218.RI.M34 - 34mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M35 | Norbar 29218.RI.M35 - 35mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M36 | Norbar 29218.RI.M36 - 36mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M37 | Norbar 29218.RI.M37 - 37mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M38 | Norbar 29218.RI.M38 - 38mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M39 | Norbar 29218.RI.M39 - 39mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M40 | Norbar 29218.RI.M40 - 40mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M41 | Norbar 29218.RI.M41 - 41mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M42 | Norbar 29218.RI.M42 - 42mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M43 | Norbar 29218.RI.M43 - 43mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M44 | Norbar 29218.RI.M44 - 44mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M45 | Norbar 29218.RI.M45 - 45mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M46 | Norbar 29218.RI.M46 - 46mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M47 | Norbar 29218.RI.M47 - 47mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M48 | Norbar 29218.RI.M48 - 48mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M49 | Norbar 29218.RI.M49 - 49mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M50 | Norbar 29218.RI.M50 - 50mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M51 | Norbar 29218.RI.M51 - 51mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M52 | Norbar 29218.RI.M52 - 52mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M53 | Norbar 29218.RI.M53 - 53mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M54 | Norbar 29218.RI.M54 - 54mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M55 | Norbar 29218.RI.M55 - 55mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M56 | Norbar 29218.RI.M56 - 56mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M57 | Norbar 29218.RI.M57 - 57mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M58 | Norbar 29218.RI.M58 - 58mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M59 | Norbar 29218.RI.M59 - 59mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M60 | Norbar 29218.RI.M60 - 60mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M61 | Norbar 29218.RI.M61 - 61mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M62 | Norbar 29218.RI.M62 - 62mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M63 | Norbar 29218.RI.M63 - 63mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M64 | Norbar 29218.RI.M64 - 64mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M65 | Norbar 29218.RI.M65 - 65mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M66 | Norbar 29218.RI.M66 - 66mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M67 | Norbar 29218.RI.M67 - 67mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M68 | Norbar 29218.RI.M68 - 68mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M69 | Norbar 29218.RI.M69 - 69mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M70 | Norbar 29218.RI.M70 - 70mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M71 | Norbar 29218.RI.M71 - 71mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M72 | Norbar 29218.RI.M72 - 72mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M73 | Norbar 29218.RI.M73 - 73mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M74 | Norbar 29218.RI.M74 - 74mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M75 | Norbar 29218.RI.M75 - 75mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M76 | Norbar 29218.RI.M76 - 76mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M77 | Norbar 29218.RI.M77 - 77mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M78 | Norbar 29218.RI.M78 - 78mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M79 | Norbar 29218.RI.M79 - 79mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RI.M80 | Norbar 29218.RI.M80 - 80mm AF RING END INLINE 16mm SPIGOT | 1 | |
| 29218.RO.I19 | Norbar 29218.RO.I19 - 1 3/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I20 | Norbar 29218.RO.I20 - 1 1/4" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I21 | Norbar 29218.RO.I21 - 1 5/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I22 | Norbar 29218.RO.I22 - 1 3/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I23 | Norbar 29218.RO.I23 - 1 7/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I24 | Norbar 29218.RO.I24 - 1 1/2" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I25 | Norbar 29218.RO.I25 - 1 9/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I26 | Norbar 29218.RO.I26 - 1 5/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I27 | Norbar 29218.RO.I27 - 1 11/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I28 | Norbar 29218.RO.I28 - 1 3/4" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I29 | Norbar 29218.RO.I29 - 1 13/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I30 | Norbar 29218.RO.I30 - 1 7/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I31 | Norbar 29218.RO.I31 - 1 15/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I32 | Norbar 29218.RO.I32 - 2" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I33 | Norbar 29218.RO.I33 - 2 1/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I34 | Norbar 29218.RO.I34 - 2 1/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I35 | Norbar 29218.RO.I35 - 2 3/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I36 | Norbar 29218.RO.I36 - 2 1/4" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I37 | Norbar 29218.RO.I37 - 2 5/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I38 | Norbar 29218.RO.I38 - 2 3/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I39 | Norbar 29218.RO.I39 - 2 7/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I40 | Norbar 29218.RO.I40 - 2 1/2" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I41 | Norbar 29218.RO.I41 - 2 9/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I42 | Norbar 29218.RO.I42 - 2 5/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I43 | Norbar 29218.RO.I43 - 2 11/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I44 | Norbar 29218.RO.I44 - 2 3/4" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I45 | Norbar 29218.RO.I45 - 2 13/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I46 | Norbar 29218.RO.I46 - 2 7/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I47 | Norbar 29218.RO.I47 - 2 15/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I48 | Norbar 29218.RO.I48 - 3" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I49 | Norbar 29218.RO.I49 - 3 1/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I50 | Norbar 29218.RO.I50 - 3 1/8" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I51 | Norbar 29218.RO.I51 - 3 3/16" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.I52 | Norbar 29218.RO.I52 - 3 1/4" AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M30 | Norbar 29218.RO.M30 - 30mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M31 | Norbar 29218.RO.M31 - 31mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M32 | Norbar 29218.RO.M32 - 32mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M33 | Norbar 29218.RO.M33 - 33mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M34 | Norbar 29218.RO.M34 - 34mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M35 | Norbar 29218.RO.M35 - 35mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M36 | Norbar 29218.RO.M36 - 36mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M37 | Norbar 29218.RO.M37 - 37mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M38 | Norbar 29218.RO.M38 - 38mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M39 | Norbar 29218.RO.M39 - 39mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M40 | Norbar 29218.RO.M40 - 40mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M41 | Norbar 29218.RO.M41 - 41mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M42 | Norbar 29218.RO.M42 - 42mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M43 | Norbar 29218.RO.M43 - 43mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M44 | Norbar 29218.RO.M44 - 44mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M45 | Norbar 29218.RO.M45 - 45mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M46 | Norbar 29218.RO.M46 - 46mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M47 | Norbar 29218.RO.M47 - 47mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M48 | Norbar 29218.RO.M48 - 48mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M49 | Norbar 29218.RO.M49 - 49mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M50 | Norbar 29218.RO.M50 - 50mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M51 | Norbar 29218.RO.M51 - 51mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M52 | Norbar 29218.RO.M52 - 52mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M53 | Norbar 29218.RO.M53 - 53mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M54 | Norbar 29218.RO.M54 - 54mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M55 | Norbar 29218.RO.M55 - 55mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M56 | Norbar 29218.RO.M56 - 56mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M57 | Norbar 29218.RO.M57 - 57mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M58 | Norbar 29218.RO.M58 - 58mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M59 | Norbar 29218.RO.M59 - 59mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M60 | Norbar 29218.RO.M60 - 60mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M61 | Norbar 29218.RO.M61 - 61mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M62 | Norbar 29218.RO.M62 - 62mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M63 | Norbar 29218.RO.M63 - 63mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M64 | Norbar 29218.RO.M64 - 64mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M65 | Norbar 29218.RO.M65 - 65mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M66 | Norbar 29218.RO.M66 - 66mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M67 | Norbar 29218.RO.M67 - 67mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M68 | Norbar 29218.RO.M68 - 68mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M69 | Norbar 29218.RO.M69 - 69mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M70 | Norbar 29218.RO.M70 - 70mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M71 | Norbar 29218.RO.M71 - 71mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M72 | Norbar 29218.RO.M72 - 72mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M73 | Norbar 29218.RO.M73 - 73mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M74 | Norbar 29218.RO.M74 - 74mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M75 | Norbar 29218.RO.M75 - 75mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M76 | Norbar 29218.RO.M76 - 76mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M77 | Norbar 29218.RO.M77 - 77mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M78 | Norbar 29218.RO.M78 - 78mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M79 | Norbar 29218.RO.M79 - 79mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 29218.RO.M80 | Norbar 29218.RO.M80 - 80mm AF RING END OFFSET 16mm SPIGOT | 1 | |
| 293087-1 | DUMMY BEARING | 1 | |
| 293163-1 | BEARING INSTALLATION DRIVER | 1 | |
| 293176-1 | SPRING HOLDER ASSEMBLY | 1 | |
| 293350-1 | Bearing Installation holder and driver | 1 | |
| 293350-1PM | BEARING INSTALLATION HOLDER AND DRIVER | 1 | |
| 293497-1 | SHIM CHECKING DUMMY BEARING SET | 1 | |
| 293732-1 | Spring Load Test Solenoid Support | 1 | |
| 293737-1 | SPRING AND ROD | 1 | |
| 293814-1 | SHIM CHECKING DUMMY BEARING SET | 1 | |
| 293824-1 | BORING MACHINE GEAR BOX HOLDING FIXTURE | 1 | |
| 294476-1 | Bearing Installation And Removal Driver | 1 | |
| 294476-1PM | BEARING INSTALLATION AND REMOVAL DRIVER | 1 | |
| 2944A547 | DEBURRING TOOL | 1 | |
| 294551-1 | BEARING HOLDER | 1 | |
| 294748-1 | BEARING DRIVER | 1 | |
| 294792-1 | ALIGLLINENT TOOL ASSEMBLY, BEARING HOUSING AND HOUSING AND | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER | 1 | |
| 294861-2 | BEARING.REMOVAL ADAPTER | 1 | |
| 294866-1 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-10 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-2 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-3 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-4 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-5 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-7 | BEARING REMOVAL ADAPTER | 1 | |
| 294866-8 | BEARING REMOVAL ADAPTER | 1 | |
| 294870-4 | BEARING REMOVAL PLATE (USED TO SUPPORT 3860160-1 BEARING WHEN REMOVING 3860168-1 STARTER GEAR FROM BEARING) | 1 | |
| 294870-7 | BEARING REMOVAL PLATE (USED TO SUPPORT 892575-1 BEARING WHEN REMOVING 3860167-1 SPLINED SHAFT FROM BEARING) | 1 | |
| 294871-1 | BEARING INSTALLATION DRIVER | 1 | |
| 294871-2 | BEARING INSTALLATION DRIVER | 1 | |
| 294871-3 | BEARING DRIVER | 1 | |
| 294871-4 | BEARING INSTALLATION DRIVER | 1 | |
| 294871-5 | BEARING INSTALLATION DRIVER | 1 | |
| 294871-6 | BEARING INSTALLATION DRIVER | 1 | |
| 294871-7 | BEARING INSTALLATION DRIVER | 1 | |
| 294879-1 | BEARING MECHANICAL PULLER (REMOVES 3822071-1 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND | 1 | |
| 294881-1 | ROTOR AND BEARING MECHANICAL PULLER | 1 | |
| 294881-3 | ROTOR AND BEARING MECHANICAL PULLER (REMOVES OIL SLINGER ROTOR AND BEARING FROM COUPLING (ALTERNATE TO 294881-1)) | 1 | |
| 294886-1 | ROTATING ASSEMBLY HOLDER (TO LOCATE INSIDE DIAMETER OF 3822065-1 SHAFT COUPLING AND SUPPORT THE ROTATING GROUP DURING SHAFT STRETCH) | 1 | |
| 294892-1 | DRIVEN COMPRESSOR BEARING | 1 | |
| 294921 | DRIVER BEARING INSTALL | 1 | |
| 294921-1 | BEARING INSTALLATION DRIVER AND WASHER | 1 | |
| 294922 | DRIVER BEARING | 1 | |
| 294922-1 | BEARING AND FAN REMOVAL DRIVER | 1 | |
| 294927-1 | DRIVEN COMPRESSOR HOISTING ADAPTER AND HOUSING REMOVAL (TO LIFT DRIVEN COMPRESSOR ASSEMBLY DURING MAINTENANCE OPERATIONS) | 1 | |
| 296181-1 | CLUTCH BEARING INSTALLATION DRIVER | 1 | |
| 296181-2 | CLUTCH BEARING INSTALLATION DRIVER | 1 | |
| 296320 | INCLUDED, GAGE RING | 1 | |
| 296480-1 | BEARING INSTALLATION DRIVER | 1 | |
| 2967-20 | M18 FUEL 18V LITHIUM-ION BRUSHLESS CORDLESS 1/2 IN. IMPACT WRENCH WITH FRICTION RING (TOOL-ONLY) | 1 | |
| 296903-1 | SPLINED HOLDER (TO ENGAGE SHAFT SPLINES DURING COMPRESSOR ASSEMBLY) | 1 | |
| 296977-1 | PILOT ASSEMBLY, SEAL AND BEARING, NUCLEUS | 1 | |
| 2971-0003W01 | ADJUSTMENT STEERING GSE | 1 | |
| 298406-1 | SHIM CHECKING DUMMY BEARING AND SPACER SET | 1 | |
| 2A1357 | GLYD RING INSTALLATION FORK | 1 | |
| 2A1799 | PISTON GUIDE O-RING INSTALLATION TOOL | 1 | |
| 2A1873-1 | "BURST DISC O-RING INSTALLATION TOOL | 1 | |
| 2A1877-1 | SOLID PLUG O-RING INSTALLATION TOOL | 1 | |
| 2BM52898 | TOOL USED TO INSTALL RETAINING RINGS | 1 | |
| 2C 14094G06 | FIXTURE, SEAL CHECK NO. 4 BEARING AND SEAL | 1 | |
| 2C14040G06 | TORQUE ADAPTER,NO. 4B BEARING | 1 | |
| 2C14064G03TK | WRENCH, SPANNER NUT NO.4B AND NO.4R BEARING HOUSING | 1 | |
| 2C14069G02 | PULLER, HOUSING-NO.4B AND NO.4R BEARING | 1 | |
| 2C14071G01 | PULLER-CAGE, FAN SPEED SENSOR AND NO.2 BEARING INNER RACE | 1 | |
| 2C14094G05 | FIXTURE, SEATING CHECK ‐ NO. 4B BEARING AND SEAL | 1 | |
| 2C14094G06 | FIXTURE, SEAT CHECK - NO. 4B BEARING AND SEAL | 1 | |
| 2C14104G01 | FIXTURE, HANDLING-NO.4B BEARING AFT INNER RACE | 3 | |
| 2C14138G01 | FIXTURE, REMOVAL ‐ MATING RINGS 1, 3, 7, AND 8 | 11 | |
| 2C14138G02 | FIXTURE, REMOVAL ‐ MATING RINGS 4 AND 6 | 12 | |
| 2C14179G01 | TOOL, INSTALLATION AND REMOVAL - BUMPER BEARING | 3 | |
| 2C14190G01 | FWD BEARING NO.5R PUSHER SUMP | 1 | |
| 2C14190G02 | PUSHER, FORWARD SUMP CLOSURE NO.5R BEARING | 2 | |
| 2C14198P11 | RING CLAMP FWD | 1 | |
| 2C14199P102 | BEARING ADAPTOR SHAFT | 1 | |
| 2C14222G01 | STAND, INSTALL/REMOVE - HPT TURBINE ROTOR SHAFT SEALS AND BEARING RACES | 4 | |
| 2C14283 | ADAPTER KIT, LUBE/DRYOUT ENGINE BEARING | 1 | |
| 2C14283 REV C | ADAPTER KIT, LUBE/DRYOUT ENGINE BEARING | 1 | |
| 2C14610G01 | PUSHER-NO 6 BEARINGS INNER RACE AND SEAL | 1 | |
| 2C14618G02 | PULLER, SUMP CLOSURE AND SEAL STATIONARY NO.4R&5R BEARINGS | 3 | |
| 2C14635 | ADAPTER,MOTORING - CORE ENGINE | 1 | |
| 2C14635 REV C | ADAPTER,MOTORING - CORE ENGINE | 1 | |
| 2C14635G01 | ENGINE CORE MOTORING ADAPTER - CF6-80 ENGINES | 1 | |
| 2C14635P02 | ADAPTER, MOTORING CORE ENGINE | 3 | |
| 2C14646G01 | PULLER,#6 BEARING INNER RACE AND SEAL | 3 | |
| 2C14648G01 | PULLER , NO.1 BEARING AND AIR/OIL SEAL | 2 | |
| 2C14648P02 | PULLER #1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P03 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P05 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14648P06 | PULLER # 1 BEARING AND AIR-OIL SEAL | 1 | |
| 2C14649 | FIXTURE MOTORING DEVICE | 1 | |
| 2C14649P05 | ADAPTER - CORE ENGINE MOTORING | 1 | |
| 2C14664G01 | TORQUE ADAPTER SET, RETAINER NUT -NO. 5R BEARING INNER RACE | 4 | |
| 2C14665G02 | TOOL SET, INSTALLATIONREMOVAL - NO. 4R BEARING OUTER RACE AND SPANNER NUT | 4 | |
| 2C14669G01 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING | 3 | |
| 2C14669G02 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING FWD RACE ( PULLER ) | 1 | |
| 2C14743P02 | RACE,BEARING NO. 4R - DUMMY | 2 | |
| 2C14749G01 | PULLER, NO.3 BEARING AIR SEAL AND HOUSING | 1 | |
| 2C14776 | TOOL,INSTALL-MAGNETIC SEAL AND RETAINING RING | 1 | |
| 2C14839G01 | TOOL, INSTALL/REMOVE - RETAINING RING, AFT BLADE RETAINER (PLIERS) | 1 | |
| 2C14871 | FIXTURE, MANIFOLD - N°1 BEARING | 1 | |
| 2C14871G01 | PULLER MANIFOLD, NO. 1 BEARING | 6 | |
| 2C14871G02 | FIXTURE,INSTALL/REMOVE-MANIFOLD N°1 BEARING | 2 | |
| 2C14871G03 | Fixture, Installation/Removal - Manifold No. 1 Bearing | 1 | |
| 2C14922P34 | FWD BEARING | 1 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5223 | GUIDE #1 & #2 BEARING HOUSING | 1 | |
| 2C5223P01 | GUIDE, NO.1 AND 2 BEARING HOUSING GUIDE | 1 | |
| 2C5825G02 | CRANK - HAND MOTORING | 1 | |
| 2C5896P01 | PLATE, Nº3 BEARING RETAINER DROP CHECK | 1 | |
| 2C6009G01 | PULLER,ADAPTER-NO.4 BEARING AI | 1 | |
| 2C6044G01 | PULLER- NO. 4 BEARING FORWARD | 1 | |
| 2C6047 | PULLER ADAPTER-NO. 4 BEARING | 2 | |
| 2C6047G01 | PULLER ADAPTER-NO. 4 BEARING | 1 | |
| 2C6047G02 | NO. 4 BEARING INNER RACES AND FORWARD SEAL PULLER ADAPTER | 1 | |
| 2C6072G02 | ADAPTOR - MOTORING | 1 | |
| 2C6084G04 | NO.5 BEARING SPANNER NUT FIXTURE (LONG) BRAND (GE) | 1 | |
| 2C6084P29 | NO.5 BEARING SPANNER NUT WRENCH (LONG) BRAND (GE) | 1 | |
| 2C6120G02 | PUSHER ‐ INNER RACE ‐ SPACER ‐ AIR AND OIL SEAL ‐ NO. 1 BEARING | 2 | |
| 2C6170 | PIN, GUIDE - BEARING INSTALLATION | 1 | |
| 2C6196P01 | NO.5 BEARING INNER RACE SEAT TOOL BRAND (GE) | 3 | |
| 2C6262G04 | PULLER INNER RACES, SPACER, AIR AND OIL SEAL - NO. 1 BEARING | 1 | |
| 2C6299G06 | PULLER, NO. 4 BEARING RACES AND SEALS | 1 | |
| 2C6627 | ADAPTER,INSTALL-NO.4B BEARING | 1 | |
| 2C6627G01 | ADAPTER,INSTALL-NO.4B BEARING | 1 | |
| 2C6823 | PULLER,MANIFOLD-NO1 BEARING | 1 | |
| 2C6823 REV A | PULLER, MANIFOLD - NO. I BEARING | 1 | |
| 2C6823G01 | PULLER-BEARING MANIFOLD NO.1 | 3 | |
| 2C6895G01 | FIXTURE, RUNOUT NO.1 AND NO.2 BEARING HOUSING. | 1 | |
| 2C6935 | PLIERS,R/I-FAN FWD/MID SHAFT,RETAINING RING | 1 | |
| 2C6935P01 | RETAINING RING FAN FORWARD/MID SHAFT ASSEMBLY | 2 | |
| 2C7146 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7146G01 | FIXTURE,HOLDING-NO.4R BEARING | 1 | |
| 2C7147G02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7147P02 | FIXTURE, HOLDING, ROT AIR SEAL, NO. 4 BEARING | 1 | |
| 2C7154 | FIXTURE,WELD,SPOT-NO.4 BEARING | 1 | |
| 2C7154G01 | FIXTURE,WELD,SPOT-NO.4 BEARING | 1 | |
| 2C80417G01 | FIXTURE, SPREADER - RETAINING RING | 1 | |
| 2C80417G04 | FIXTURE, SPREADER - RETAINING RING | 1 | |
| 2C81013G01 | FIXTURE, AFT COUPLING NUT DRIVE SHAFT SPIRAL RING INSTALLATION (SPIRAL RING FIXTURE) | 1 | |
| 2C81049G01 | PROTECTOR, COVER - FUEL METERING MANIFOLD | 1 | |
| 2C81049P01 | Cover − Fuel Metering Manifold Protector | 1 | |
| 2C81050G01 | ADAPTER, TORQUE-LOCKNUT, NO. 5 BEARING INNER RACE | 3 | |
| 2C81110G01 | PULLER, NO. 1 BEARING INNER RACE AND SEAL | 1 | |
| 2C81150P01 | RING ASM,FWDR COMPR ROTOR CF34 | 1 | |
| 2C81151P01 | RING, ASSY - STAGE 3 BLISK/FWD | 1 | |
| 2C81168 | PUSHER, NO. 4 BEARING IR & FWD | 1 | |
| 2C81168P01 | PUSHER, NO. 4 BEARING IR & FWD | 1 | |
| 2C81178 | ADAPTER, TORQUE NO 3 BEARING L | 1 | |
| 2C81178G01 | ADAPTER, TORQUE NO 3 BEARING L | 1 | |
| 2C81178G03 | ADAPTER, TORQUE - NO. 3 BEARING LOCK | 1 | |
| 2C8131401 | GUIDE-NO 3 BEARING COMPONENTS | 1 | |
| 2C81411P01 | GUIDE, NO. 4 BEARING (BEARING GUIDE) | 1 | |
| 2C81415G01 | PULLER SET, AFT STATIC SEAL, SPRING MOUNT AND CARBON SEAL | 1 | |
| 2C81436 | RING, ASSEMBLY STAGE 1 FWD COO | 1 | |
| 2C81436P01 | RING, ASSEMBLY STAGE 1 FORWARD | 1 | |
| 2C81440P01 | RING, SUPPORT - STAGE 2 DISK, HPT | 1 | |
| 2C81457G02 | FIXTURE SPREADER - RETAINING RING | 1 | |
| 2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81535P01 | GUIDE, NO 5 BEARING | 1 | |
| 2C81543G01 | FIXTURE, SHROUD RING N0 3 | 1 | |
| 2C81591G01 | FIXTURE, SHROUD RING N0 3 POST SB 72-0138 | 1 | |
| 2C81652G01 | ADAPTER, INSTALL BEARING, AXIS | 1 | |
| 2C81653G01 | ADAPTER, INSTALL BEARING, AXIS | 1 | |
| 2C81656G01 | ADAPTER, REMOVAL, BEARING, AXI | 1 | |
| 2C81657G01 | ADAPTER, REMOVAL, BEARING, AXI | 1 | |
| 2C81658G01 | ADAPTER, REMOVAL, BEARING, AXI | 1 | |
| 2C81659G01 | ADAPTER, REMOVAL, BEARING, AXI | 1 | |
| 2C81661G01 | ADAPTER, REMOVAL, REAR BEARING | 1 | |
| 2C81673P01 | 2C81673P01 BEARING (GUIDE PIN) | 1 | |
| 2C81946 | FIX - INSTAL. MATING RING - AXIS-D | 1 | |
| 2C81946G01 | INSTALLER, AXIS-D MATING RING | 2 | |
| 2C81952 | GUIDE - INSTALL-MATING RING | 1 | |
| 2C81952P01 | GUIDE - INSTALL - MATING RING | 1 | |
| 2C81956G01 | PUSHER SET, MATING RINGS, AXIS G,E AND C&F | 2 | |
| 2C91027G01 | PUSHER - #4 AND #7 BEARING | 1 | |
| 2C91028 | PUSHER - NO. 4 AND NO. 7 BEARING OUTER RACE | 1 | |
| 2C91028G01 | PUSHER - #4 AND #7 BEARING | 1 | |
| 2C91078 | FIXT.#3 BEARING INNER RACE DC | 1 | |
| 2C91125G01 | ADAPTER, NO. 5 BEARING LOCKNUT SPANNER | 1 | |
| 2C91173G01 | PUSHER-DUPLEX BEARING | 1 | |
| 2C91174G01 | PLATE-PULLER DUPLEX BEARING | 1 | |
| 2C91179G01 | PLATE-PULLER DUPLEX BEARING | 1 | |
| 2C91259P01 | RING - DROP CHECK - #6 SEAL | 1 | |
| 2C91284G01 | RING - STG 2 SHROUD | 1 | |
| 2C91323G01 | ADAPTER - #1 BEARING - LOCKNUT | 1 | |
| 2C91330G01 | PULLER - #1 BEARING AND SEAL RUNNER | 1 | |
| 2CF65B80511 | FIXTURE - SPRING REMOVAL AND INSTALLATION, FORCE LIMITER, LATERAL CONTROL INPUT BUS | 1 | |
| 2MIT65B01201 | PULLER - LOWER BEARING SEAL RETAINER, SHOCK STRUT, MAIN LANDING GEAR | 11 | |
| 2MIT65B01503 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| 2MIT65B02070 | INSTALLATION AND REMOVAL TOOL - ROLLER SWAGED BEARING | 1 | |
| 2MIT65B03670 | HORIZONTAL STABILIZER HINGE BOLT AND BEARING REPLACEMENT TOOL KIT | 6 | |
| 2MIT65B03670-1 | HORIZONTAL STABILIZER HINGE BOLT AND BEARING REPLACEMENT TOOL KIT | 3 | |
| 2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
| 2MIT65B82591 | HEAD SPANNER WRENCH - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| 2MIT65B98000 | SECURING CLIP SET - BLOCKER DOOR DEACTIVATED TURBINE THRUST REVERSER | 1 | |
| 2P16261 | RING, GRADUATED | 1 | |
| 2TSJ65B01503 | TEST FITTING ASSEMBLY - HYDRAULIC ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| 2Z/7T | BAHCO 2Z/7T 1/4" - 7/8" DEEP OFFSET DOUBLE RING-END WRENCH SET – 7 PIECES | 1 | |
| 3-1438-1 | WHEEL AND BEARING PROTECTOR SET (737-400 NOSE) RED | 4 | |
| 3-1439-6 | WHEEL AND BEARING PROTECTOR SET (737-400 MAIN) BEIGE | 1 | |
| 3-1510-1 | WHEEL AND Bearing Protector Set (A330 Nose) | 1 | |
| 3-1531-3 | WHEEL AND BEARING PROTECTOR SET (A320 NOSE) YELLOW | 1 | |
| 3-1546 | ADAPTER RING | 1 | |
| 3-1560 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS | 1 | |
| 3-1609-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS | 1 | |
| 3-1610-1 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS | 1 | |
| 3-506-01 | SPRING TEST AND BALANCE FIXTURE | 1 | |
| 3-6C-52 | 3/4 SHX SKT 1/2 DR W/RET RING | 1 | |
| 3-902N | OÕRING NITRILE 90 DURO | 1 | |
| 3-905N | OÕRING NITRILE 90 DURO | 1 | |
| 3-9078 | WIRE RETAINING RING INSTALLATION AND REMOVAL TOOL | 1 | |
| 3-9078-AZL | RETAINER RING INSTALLATION AND REMOVAL TOOL | 1 | |
| 3-9078. | WIRE RETAINING RING INSTALLATION AND REMOVAL TOOL | 1 | |
| 3-910V884-75 | O-RING viton75D 0.949in | 1 | |
| 3-912V884-75 | O-RING VITON 75D 1.156 IN | 1 | |
| 3.5 OTJA | RING ADAPTER, SMALL | 1 | |
| 3.5-OTJA | RING ADAPTER, LARGE | 1 | |
| 3/8-24 | Gauge thread ring | 3 | |
| 30-012 | CARBIDE RING | 1 | |
| 30-1219028-00 | SPRING # SPRING TENSION SUBAY,SIDE STAY | 1 | |
| 30-900-1002 | Sylvac 30-900-1002 Transducer Probe P5BL Linear Measuring Range +/- 5mm/0.2" | 1 | |
| 30-900-1003 | Sylvac 30-900-1003 Transducer Probe P5V Linear Measuring Range 5mm/0.2" | 1 | |
| 30-900-1006 | Sylvac 30-900-1006 Transducer Probe P5L Linear Measuring Range 5mm/0.2" | 1 | |
| 30-900-1007 | Sylvac 30-900-1007 Transducer Probe P5BVL Linear Measuring Range 5mm/0.2" | 1 | |
| 30-900-1008 | Sylvac 30-900-1008 Transducer Probe P5VL Linear Measuring Range 5mm/0.2" | 1 | |
| 30-900-1010 | Sylvac 30-900-1010 Transducer Probe P10 Linear Measuring Range 10mm/0.4" | 1 | |
| 30-900-1014 | Sylvac 30-900-1014 Transducer Probe P10L Linear Measuring Range 10mm/0.4" | 1 | |
| 30-900-1025 | Sylvac 30-900-1025 Transducer Probe P25 Linear Measuring Range 25mm/1" | 1 | |
| 30-900-1101 | Sylvac 30-900-1101 Transducer Probe P2I Linear Measuring Range +/- 2mm/0.8" | 1 | |
| 30-900-1102 | Sylvac 30-900-1102 Transducer Probe P2IP Linear Measuring Range +/- 2mm/0.8" | 1 | |
| 30-900-1111 | Sylvac 30-900-1111 Transducer Probe P5I Linear Measuring Range +/- 5mm/0.2" | 1 | |
| 30-900-1112 | Sylvac 30-900-1112 Transducer Probe P5I Linear Measuring Range +/- 5mm/0.2" | 1 | |
| 300-FB | HI-DUTY 45 FLARING TOOL | 1 | |
| 30006-0084 | DYNAMOMETER SPRING SCALE 0-10,000 | 2 | |
| 300460-737Q | TOWBAR - AIRPLANE, TOWING AND STEERING | 4 | |
| 300FB | HI-DUTY 45 FLARING TOOL | 1 | |
| 300XT | COMPACT VACUUM FORMING MACHINE IDEAL FOR SMALL TO MEDIUM-SIZED PARTS, FEATURING DIGITAL CONTROLS. | 1 | |
| 302294 | METERING PLUG SECANDRY | 1 | |
| 30385-00104 | BEARING NEEDLE | 1 | |
| 3042000F32 | Ring Drive Tool | 1 | |
| 306989 | BRAKE SPRING SPREADER TOOL | 1 | |
| 30G1412 | PIN SHOULDER COMPRESSOR STATOR SYNCHRONIZING RING ARM | 1 | |
| 30G2664 | PIN SHOULDER COMPRESSOR STATOR SYNCHRONIZING RING ARM | 1 | |
| 30P991001702-501 | WING JACKING PAD / MOORING ADAPTER | 1 | |
| 30P991001702‐501 | WING JACKING PAD / MOORING ADAPTER | 1 | |
| 30S | SOLDERING GUN | 1 | |
| 30S/331 | ELECTRIC SOLDERING GUN | 1 | |
| 30S341 | SOLDERING PEN | 2 | |
| 31-37-100 | ZEROING-EQUIPMENT SYNCHRO RESOLVERS TRANSM AND WIRING | 3 | |
| 31-590-100 | ZEROING-EQUIP SYNCHRO-RESOLVERS TRANSMIT AND WIRING | 2 | |
| 310025 | PPG Semco 310025 14 NPT Threaded Syringe Filler Adapter | 1 | |
| 310100 | PPG Semco 310100 1cc Syringe Adapter Head with Hose Assembly | 1 | |
| 310300 | PPG Semco 310300 3cc Syringe Adapter Head with Hose Assembly | 1 | |
| 310600 | PPG Semco 310600 6cc Syringe Adapter Head with Hose Assembly | 1 | |
| 311000 | PPG Semco 311000 10cc Syringe Adapter Head with Hose Assembly | 1 | |
| 312000 | PPG Semco 312000 20cc Syringe Adapter Head with Hose Assembly | 1 | |
| 3125-75 | SOLDERING IRON, 75W | 1 | |
| 313500 | PPG Semco 313500 35cc Syringe Adapter Head with Hose Assembly | 1 | |
| 314STD-30-0001 | ICE AND RAIN PROTECTION-SYSTEM MESSAGES - ELECTRICAL WIRING MODIFICATIONS IN THE PROPELLER | 1 | |
| 3150670-2 | VOLTAGE MONITORING CARD ASSY | 1 | |
| 316-2 | PEN REAMER DE-BURRING TOOL KIFE WITH REPLACEABLE BLADE | 1 | |
| 316000 | PPG Semco 316000 60cc Syringe Adapter Head with Hose Assembly | 1 | |
| 3170034-1 | REMOVAL TOOL, MAIN LANDING GEAR STRUT METERING PIN | 1 | |
| 3170034-6 | REMOVAL TOOL, MAIN LANDING GEAR STRUT METERING PIN | 1 | |
| 3170037-2 | ELEVATOR DOWN SPRING RIG PIN | 1 | |
| 3170053-001 | DIGITAL NOSE STEERING TEST BOX | 1 | |
| 3170053-002 | DIGITAL NOSE STEERING TEST BOX | 1 | |
| 3170053-003 | DIGITAL NOSE WHEEL STEERING TEST SET | 1 | |
| 3170053-004 | DIGITAL NOSE STEERING TEST BOX | 1 | |
| 3176987-1 | RING SET GUIDE | 1 | |
| 3177253-1 | RING SET GUIDE | 1 | |
| 320-4-44816-101 | FUEL CELL BALLISTIC RING CLAMPING AND LOCATING DEVICE | 1 | |
| 320008B | DEFLATOR TIRE (KESTREL ENGINEERING LTD) | 7 | |
| 3201-04-17 | BALL LOCK PIN D.ACTING ¯1/4X1.7" RING HANDLE | 8 | |
| 3201-0406 | BALL LOCK DOUBLE-ACTING 1/4 X 0.6" STAINLESS RING-HANDLE | 4 | |
| 3201-0410 | BALL LOCK PIN 1/4 X 1.00 RING HANDLE DOUBLE ACTING STAINLESS | 1 | |
| 3201-0417 | BALL LOCK PIN D.ACTING ¯1/4X1.7" RING HANDLE | 8 | |
| 3218AS161-1 | TOOL, BEARING AND INSERTER AND REMOVER | 2 | |
| 328C | Boring Reference Standard, PT6 53-10-38 | 1 | |
| 33-866 | TONE AND PROBE WIRING TESTER | 2 | |
| 330A93-2018-00 | EXTRACTOR,BEARING PITCH ROD | 1 | |
| 330A93-2023-00 | EXTRACTOR,BEARING PITCH CONTROL ROD | 1 | |
| 330A98-2045-01 | TOOL,INSERTING BEARING/SPINDLE | 1 | |
| 330A98-2085-02 | EXTRACTOR,SPINDLE BEARING | 1 | |
| 330A98-2126-00 | EXTRACTOR,PITCH CHANGE BEARING ROD | 1 | |
| 332A32-2137-20 | RING GEAR,FIXED | 1 | |
| 332A91002500 | STEERING BAR "RADAR O.R.B" | 1 | |
| 332A91318010 | CORD,SECURING L300MM | 1 | |
| 332A93-3102-20 | INSERTER, BEARING AND BUSHING | 1 | |
| 332A93-3125-01 | BEARING/SPINDLE HAFTING TOOL | 1 | |
| 332A93-3125-02 | TOOL,INSERTING SPINDLE BEARING | 1 | |
| 332A93-3224-21 | MGB CENTERING STUD | 1 | |
| 332A93-3401-00 | EXTRACTOR TRD SHAFT BEARING | 1 | |
| 332A93-3401-01 | EXTRACTOR TRD SHAFT BEARING | 1 | |
| 332A93-3405-00 | SHAFT BEARING TAIL DRIVE ASSEMBLY. TOOL | 1 | |
| 332A93-4204-20 | SPRING SCALE CAPABLE 6DAN (13.5LBF) | 1 | |
| 332A93340100 | DRIVE SHAFT BEARING EXTRACTOR | 1 | |
| 332A93340101 | EXTRACTOR TRD SHAFT BEARING | 1 | |
| 332A94340003 | ALIGNMENT TOOL -TAIL DRIVE LINE BEARING | 1 | |
| 332A98‐3400‐11 | 140 DUMMY BEARING | 1 | |
| 332А91-1190-01 | SLING FOR DISMANTLING THE BLADE OF THE LOAD-BEARING SCREW | 1 | |
| 33BA(1/2-2020) | JACOBS PLAIN BEARING GEARED KEY DRILL CHUCK | 1 | |
| 340231 | SPRING, AFT CARGO DOOR LEVER ARM | 1 | |
| 34025-14 | DELTA RING FOR WEB 1"3/4 | 1 | |
| 34025-3 | DÕRING | 1 | |
| 3403146-1 | NEGATOR SPRING TOOL (DOORS) | 1 | |
| 342-20-2-SP | SCHEMATIC WIRING TRANSDUCER | 1 | |
| 343A100KN2 | HYDRAULIC LOAD CELL WITH BORING | 6 | |
| 343A10KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) | 1 | |
| 343A160KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) | 2 | |
| 343A1MN3 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) | 2 | |
| 343A250KN2 | HYDROLOAD HYDRAULIC LOAD CELL WITH BORING | 1 | |
| 343A25KN2 | RING-TYPE LOAD CELL 844 | 4 | |
| 343A400KN2 | HYDRAULIC LOAD CELL WITH BORING | 6 | |
| 343A63KN2 | HYDRAULIC LOAD CELL WITH BORING | 7 | |
| 3464-4 | WRENCH, COMPRESSOR EXTENSION SHAFT AND COMPRESSOR FRONT BEARING NUT SHAFT | 2 | |
| 3464-5 | HOLDER, COMPRESSOR EXTENSION SHAFT AND COMPRESSOR FRONT BEARING NUT SHAFT | 1 | |
| 34L4801 | ADAPTER -IBM 16/4 TOKEN RING CARDBUS | 1 | |
| 35-0F5-1000 | WIRING LIGHTS CONTROL BOARD | 14 | |
| 35-380020-1 | RING, BRAKE MOD | 1 | |
| 35-815246-13 | BEARING MAIN LANDING GEAR | 1 | |
| 35-815246-9 | BEARING, MAIN LANDING GEAR | 1 | |
| 35-91034-0001 | DISENGAGEMENT UNIT, STEERING | 1 | |
| 350A25-1347-20 | BEARING SPHERICAL WINDOW | 1 | |
| 350A92-1200-00 | TAIL ROTOR BLADE MOORING | 1 | |
| 350A93-1280-00 | TAIL BLADES RING EXCHANGE | 2 | |
| 350A93-3206-20 | TOOL SEAL AND RING MGB | 1 | |
| 350A93-3206-21 | INSTALLATION TOOL, UNDER-SEAL RING | 1 | |
| 350A93-3312-03 | SPHERICAL LAMINATED BEARING REMOVAL TOOL FOR TAIL ROTOR YOKE | 2 | |
| 350A93-3318-02 | TAIL ROTOR VARIABLE PITCH DUAL BEARING REMOVAL TOOL | 1 | |
| 350A93-3321-00 | DOUBLE SEAL/RING HAFTING DEVICE | 1 | |
| 350A93-3405-00 | TRDS BEARING REPLACE TOOL | 1 | |
| 350A93-3410-00 | SHRING THIMBLE DRIVE SHAFT BEARING | 2 | |
| 350A93-3410-00/PHP | SHRING THIMBLE DRIVE SHAFT BEARING | 1 | |
| 350A93-3500-00 | HYDRAULIC PUMP BEARING REPLACEMENT TOOL | 2 | |
| 350A93-3502-00 | TDL BEARING PRESS | 1 | |
| 350A93-3550-00 | HYDRAULIC BEARING KIT | 1 | |
| 350A93-3550-01 | TOOL KIT TO REMOVE /INSTALL THE DRIVE BEARING OF THE HYDRAULIC PUMP | 2 | |
| 350A93-3705-20 | BEARING EXTRACTOR ND | 1 | |
| 350A93-3712-00 | BLOCK, BEARING ADJUST. ON ROT.START | 2 | |
| 350A93-3712-00/PHP | BLOCK BEARING ADJUST ON ROT. START | 1 | |
| 350A93340020 | SHRING THIMBLE DRIVE SHAFT BEARING | 1 | |
| 350A933410-00-PHP | TAIL DRIVE SHAFYT BEARING MOUNTING GUIDE SLEEVE | 1 | |
| 350A93341000 | SHRING THIMBLE DRIVE SHAFT BEARING | 2 | |
| 350A93355000 | HYDRAULIC BERING KIT | 1 | |
| 350A93355001 | TOOL KIT TO REMOVE AND INSTALL THE DRIVE BEARING OF HYD. PUMP, KIT CONSIST OF FOLLOWING TOOLS:- | 2 | |
| 350A93371200 | BLOCK BEARING ADJUST ON ROT. START | 2 | |
| 350A933714-00PHP | ADJUSTING SPHERICAL BEARING1 | 1 | |
| 350A93371400 | ADJUSTING SPHERICAL BEARING | 1 | |
| 35211-201 | PAD, SPRING LEAF | 1 | |
| 353512-1 | D RING, CARGO TIE DOWN | 2 | |
| 354A | CUP: BEARING,ROLLER,TAPERED, MADE TO CLASS 2 W/CODE 629 | 4 | |
| 355-9106 | Mitutoyo 355-9106 - Strato-Apex High Accuracy Coordinate Measuring Machine | 1 | |
| 355A91-3740-01 | MAST RING FOR HOISTING DEVICE | 2 | |
| 356-9106 | Mitutoyo 356-9106 - Legex Ultra-high Accuracy Coordinate Measuring Machine | 1 | |
| 360-1234 | Mitutoyo 360-1234 - CARB-Apex Car Body Measuring System | 1 | |
| 360-353 | Mitutoyo 360-353 - MACH-3A In-Line Coordinate Measuring Machine | 1 | |
| 360-4321 | Mitutoyo 360-4321 - CARB-Strato Car Body Measuring System | 1 | |
| 36307.210.005 | SPRING DISC 20X10.2X0.5 | 1 | |
| 365A93-3212-20 | MGB RING ASSY DRIFT | 1 | |
| 365A93-3212-20/PHP | MGB RING ASSY DRIFT | 1 | |
| 365A93-3440 | DRIVE SHAFT BEARING REPLACEM | 1 | |
| 365A93-3440-00 | DRIVE SHAFT BEARING REPLACEMENT TOOL | 1 | |
| 365A93-3440-00/PHP | TOOL,DRIVE SHAFT BEARING REPLACEMENT | 1 | |
| 365A93321220 | MGB RING ASSEMBLY DRIFT | 1 | |
| 365A93344000 | DRIVE SHAFT BEARING REPLACEMENT TOOL | 1 | |
| 365G | Transducer Guide, 737 PT4 72-20-01, with string attached | 1 | |
| 369A9825 | PITCH BEARING STUD WRENCH | 1 | |
| 369D23601-80910 | ANGLE MEASURING TOOL (P/N 369D23601-80910) | 1 | |
| 369D29985 | BUNGEE SPRING COMPRESSOR TOOL ROD & CHANNEL | 1 | |
| 36A | Tennsmith® Squaring Shears (Capacity: 16 / 20 ga.) (Maximum cutting length: 37") (Gauge ranges (back/front): 30" / 37") (Strokes per minute: 40) (Shipping weight: 800 lbs (363 kgs)) (Add to cart: Add To Cart) | 1 | |
| 37 DEGREE FLARING TOOL | 37 DEGREE FLARING TOOL 1" | 1 | |
| 3700614-1 | ADJUSTABLE BEARING PLATE | 1 | |
| 373923 | SPRING FOR DESOUTTER PNEUMATIC SCREWDRIVER HEAD | 1 | |
| 3782G01 | Wrench I/R Fan Blade Ring | 1 | |
| 3791011-1 | Spring Scale Centering Adapter Plate | 1 | |
| 3791011-1PM | SPRING SCALE CENTERING ADAPTER PLATE | 1 | |
| 3791057-1 | DRIVER BEARING | 1 | |
| 3791107-1 | BEARING-DRIVER AND HOLDER | 1 | |
| 3791109-1 | BEARING-INSTALLATION DRIVER SET | 1 | |
| 3791120-1 | BEARING DRIVER SET | 1 | |
| 3791192-1 | SPRING LOAD ADATER | 1 | |
| 37D403063G01 | RING, HPT STATOR GRINDING | 1 | |
| 38076-00017-002 | INSERTER AND REMOVER SET,BEARING AND BUSHING | 1 | |
| 383300TFI-101 | YAW AND ROLL TRIM ACTUATORING | 1 | |
| 38585 8 X 14 | WASHER DIN988 8X14X0.5 SPRING ST OIL HRC 44-49 | 1 | |
| 38590 8 X 14 | WASHER DIN988 8X14X1 SPRING ST OIL HRC 44-49 | 1 | |
| 390-59001-0035 | SPOILER RING AID | 1 | |
| 3916725-511 | Guide - MLG Strut O-Ring | 1 | |
| 3916725-513 | Guide - MLG Strut O-Ring | 1 | |
| 3916726-1 | N/L/G LOWER BEARING GUIDE | 4 | |
| 3916726-501 | Guide - NLG Strut O Ring | 2 | |
| 3916726-503 | Guide - NLG Strut O Ring | 1 | |
| 394A-20629 | BEARING, ROLLER, TAPERED | 1 | |
| 39610-7 | SPRING COTTER ¿7 YELLOW PASSIVATED DIN11024 | 1 | |
| 39626-810 | BORDERING FIXTURE | 1 | |
| 39630-6.5 | SPRING COTTER ¿6.5 YELLOW PASSIVATED DIN11024 | 1 | |
| 399HT014 | SPRING - LOADED SEATING TOOL HANDLE | 1 | |
| 3ASH45A | MINI BENT TIP BLACK HAND Q400 RET RING | 1 | |
| 3C3563G02 | INSERTER AND REMOVER,BEARING AND BUSHING | 1 | |
| 3CPV | END FINISHING FLARING AND EADING MACHINE | 1 | |
| 3G6005G00231 | PULLER KIT, M/R AND T/R UPPER RING REM | 1 | |
| 3G6200G02831 | M/R SLIDING RING CENTERING TOOL | 1 | |
| 3G6205G04531 | TOOL (M/R SLIDING RING CENTERING) | 1 | |
| 3G6205G04532 | TOOL, M/R SLIDING RING CENTERING | 1 | |
| 3G6305G05831 | TR DRIVE QUILL RING NUT REPL KIT | 1 | |
| 3G6305G05833 | TOOL KIT, TAIL ROTOR DRIVE QUILL RING NUT REMOVE INSTALL | 1 | |
| 3G6405G00631 | EXTRACTOR, TR DUPLEX BEARING | 1 | |
| 3G6405G04032 | TOOL KIT, T/R DUPLEX BEARING REM/INST | 1 | |
| 3G6405G04132 | INSTALLATION TOOL, TR DUPLEX BEARING | 1 | |
| 3M1X1-10PC | NEW SURPLUS - SPECIAL BUY - 3M Scotch-Brite® 1" Deburring Wheel - Made in USA! | 1 | |
| 3MIT65B00162 | Lock Assy Nose Gear Mooring and Jacking | 5 | |
| 3MIT65B01202 | PULLER - LOWER BEARING SEAL RETAINER, SHOCK STRUT, NOSE LANDING GEAR | 9 | |
| 3MIT65B01519 | BEARING PULLER TOOL KIT FOR NOSE LANDING GEAR | 6 | |
| 3MIT65B01519-1 | TORQUE ADAPTER - WRENCH, STEERING METERING VALVE, NOSE LANDING GEAR | 11 | |
| 3OHME65B00002 | SLING - RECOVERY, LIFTING AND TETHERING | 1 | |
| 3SF5060-24-11P | Spacer CSD Quad Ring Wear Check | 1 | |
| 3SF6133-1 | NLG STEERING ADAPTER WRENCH | 1 | |
| 3T6505G00431 | AW139 TRD SUPPORT BEARING REPAIR TOOL KIT | 1 | |
| 3T6505T00431 | TOOL KIT, TRD SUPPORT BEARING REPAIR | 1 | |
| 3TSJ65B01503-1 | TEST FIXTURE - ACTUATOR ASSEMBLY, NOSE LANDING GEAR STEERING | 1 | |
| 4-40-M30RW-2.5-304SS | FLOW MEASURING SECTION .(CAGE: 0W9D9) | 1 | |
| 4-GM | TOOL, FLAIRING AND CLOSING PUNCH | 1 | |
| 40-42A82 | Bowers 40-42A82 Measuring Insert with offset Point M2.5mm Thread | 1 | |
| 4013334-839G01 | PULLER - RING ADAPTE | 1 | |
| 40171W28-8 | RING FOR STRAP WIDE 1" | 1 | |
| 402-FA | HEAVY DUTY FLARING TOOL | 3 | |
| 4049584-901 | CDU - CENTERING CHECK OVERLAY | 1 | |
| 407-240-016-101 | TOOL SET BEARING REMOVAL TR DRIVE | 1 | |
| 407-275-001-107 | SOLDERING SELF-IGNITING BUTANE KIT IRON WELLER PORTASOL | 1 | |
| 407-FWU-OH-23 | ADAPTER BEARING INSTALLATION TOOL | 1 | |
| 40743061ST | APPLICATOR FOR O-RING (OUTLET CONNECTOR - THREAD) | 1 | |
| 40743118ST | APPLICATOR FOR O-RING (SHUT OFF SPINDLE) | 1 | |
| 41003-01 | BCW Engineering 41003-01 Brown Phenolic 316 x 34 x 8 Hand Held Sealant Scraper | 2 | |
| 41004-01 | BCW Engineering 41004-01 Brown Phenolic 316 x 1 x 8 Hand Held Sealant Scraper | 2 | |
| 41005-01 | BCW Engineering 41005-01 Brown Phenolic 316 x 1-12 x 8 Hand Held Sealant Scraper | 2 | |
| 41006-01 | BCW Engineering 41006-01 Brown Phenolic 316 x 2 x 8 Hand Held Sealant Scraper | 2 | |
| 446397 | O RING SEAL DIA 10,3 (SIMRIT) | 1 | |
| 446895 | O RING SEAL DIA 12 SIMRIT) | 1 | |
| 447586 | O RING SEAL DIA 13,1 (SIMRIT) | 1 | |
| 450643 | SPRING GUIDE | 2 | |
| 472995 | HYDRAULIC/CONNECTING ROD REPAIR KIT TOOL NO. 472995 USED DURING DISMANTLING AND FITTING INLET AND EXHAUST VALVES | 1 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 473018 | PISTON RING EXPANDER | 1 | |
| 478505 | Henkel 981880 LOCTITE Reservoir Tank Lid O-Ring | 1 | |
| 502670 | SPRING ADJUSTING | 1 | |
| 502699 | WIRING HARNESS LOAD PIN | 1 | |
| 548712 | GUIDE AND SPRING, BRUSH LOCK | 1 | |
| 574125 | STAND (TO HOLD MECHANISM DURING DISASSEMBLY) | 1 | |
| 586132 | MECHANISM STAND, FOR SUPPORTING MECHANISM DURING OVERH | 1 | |
| 586134 | STAND (TO REMOVE HAIR SPRING (2-100)) | 1 | |
| 593354 | HOZIRONTAL DRIVE SHAFT BEARING | 1 | |
| 593363 | DOUBLE BEARING | 1 | |
| 612192 | POSITIONER, SPRING LOADED, MS | 1 | |
| 612245 | POSITIONER, SPRING LOADED, MS | 1 | |
| 612314 | POSITIONER ASS'Y, SPRING LOADED, MS | 1 | |
| 613363 | LOCATOR, SPRING LOADED | 1 | |
| 645002 | POSITIONER, SPRING LOADED, MS | 1 | |
| 663466 | SPRING USED ON VALVE SURGE AIR | 1 | |
| 670166 | ROD SEAL REMOVING TOOL (45 DEGREE O-RING PICK) (GOODRICH P/N 670166) | 1 | |
| 705516 | SHRINKING TOOL FOR END FITTING SELF ALIGNING BEARING | 1 | |
| 713039 | TOOL FOR DISASSEMBLING RINGS | 1 | |
| 713372 | ASSEMBLY DRIFT FOR SHOULDER RING | 1 | |
| 713444 | ASSEMBLY AND CRIMPING TOOL FOR BEARING | 1 | |
| 714153 | GUIDE FOR PISTON IN 806155 IN THE BEARING | 1 | |
| 716182 | ASSEMBLY TEFLON RING ON TRANSDUCER | 1 | |
| 716192 | MEASURING BRIDGE FOR SENSORS | 1 | |
| 716775 | DISASSEMBLY TOOL FOR BEARING | 1 | |
| 716777 | TOOL FOR THE ASSEMBLY OF SHOULDER RING | 1 | |
| 716778 | TOOL FOR THE ASSEMBLY OF SHOULDER RING | 1 | |
| 726691 | BEARING CYLINDER SEALS INSTALLATION SET | 1 | |
| 726692 | CONE AND RING FOR SHRINKING ON BEARING | 1 | |
| 726693 | CONE AND RING FOR SHRINKING ON ROD ASSEMBLY | 1 | |
| 726694 | INSTALLATION OF BEARING IN ACTUATOR BODY | 1 | |
| 726695 | CONE AND RING FOR SHRINKING ON COIL | 1 | |
| 726709 | CONE AND RING FOR INSTALLATION OF LINING | 1 | |
| 726710 | CONE AND RING FOR INSTALLATION OF LINING | 1 | |
| 726711 | CONE AND RING FOR INSTALLATION OF LINING | 1 | |
| 726713 | SEAL AND RING INSTALLATION CONE | 1 | |
| 726714 | SEAL AND RING INSTALLATION CONE | 1 | |
| 726715 | CONE AND RING FOR INSTALLATION OF SEAL | 1 | |
| 726717 | CONE AND RING FOR INSTALLATION OF SEAL | 1 | |
| 726765 | CENTERING OF ACTUATOR BODY IN UNIT ASSEMBLY | 1 | |
| 726844 | CONE AND RING FOR SEAL AND SEGMENT INSTALLATION | 1 | |
| 726846 | BEARING CYLINDER INSTALLATION AND REMOVAL TOOL | 1 | |
| 726854 | CONE AND RING SET | 1 | |
| 726870 | SET FOR INSTALLATION OF SEAL AND RING ON PISTON | 1 | |
| 726892 | INSTALLATION OF BEARING ON LINK ROD | 1 | |
| 726953 | BEARING LINK ROD CRIMPING | 1 | |
| 727438 | TOOL FOR CHECKING BALLJOINT CENTERING ON BODY SIDE | 1 | |
| 728414 | TOOL FOR INSTALLATION OF SEAL AND RING | 1 | |
| 733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | 1 | |
| 733624 | TOOL FOR THE DISASSEMBLY OF THE BEARINGS | 1 | |
| 756202 | JET BRAND FOOT SHEARS 16 GAUGE 52 SHEARING CAPAC | 2 | |
| 767442 | BEARING MATCHED SET | 1 | |
| 780013 | GUIDE INSTALLATION BALL BEARINGS | 1 | |
| 780016 | HAND PRESS INSTALLATION BEARINGS | 1 | |
| 790611 | STRAIGHT SINKER FOR DEBURRING 3/16" | 1 | |
| 833503 | Bearing Driver | 1 | |
| 833505 | Bearing Driver | 1 | |
| 833506 | Bearing Driver | 1 | |
| 833507 | Bearing Driver | 1 | |
| 833508 | BEARING DRIVER | 1 | |
| 833550 | SET DRIVER BEARING INSTALLATION | 1 | |
| 834718 | Adapter, Removal Bearing | 1 | |
| 834731 | Centering Fixture, 1st and 2nd Stage Impeller Axial Tip Clearance | 1 | |
| 877110 | GUIDE SLEEVE FOR O-RING 3.2*1.8 IDLE MIXTURE SCREW AND IDLE JET 35 | 1 | |
| 877316 | GRADUATED STRAIGHTEDGE ASSY,. FOR CHECKING PLAIN BEARING PROTRUSION | 1 | |
| 877320 | PRESS-IN RING FOR BALL BEARING 35-72-17 , PROPELLER SHAFT HANDLE WITH PART NO : 876518 | 1 | |
| 877380 | VALVE PRING MOUNTING DEVICE | 1 | |
| 877387 | VALVE SPRING LOADING JIG | 1 | |
| 877594 | PRESS-IN JIG FOR ROLLER BEARING 25*52*15 AND OIL SEAL 30*52*7 , FOR F2 | 1 | |
| 877790 | ADAPTER RING ASSY | 1 | |
| 900020 | DEBURRING BLADE | 1 | |
| 900033 | CK-1 SQUARING BLADE | 1 | |
| 900052 | SOLDERING STATION | 1 | |
| 900053 | SOLDERING STATION | 1 | |
| 900203 | DOUBLE ENDED DEEP OFFSET RING WRENCHES | 1 | |
| 900206 | DOUBLE ENDED DEEP OFFSET RING WRENCHES | 1 | |
| 900212 | DOUBLE ENDED DEEP OFFSET RING WRENCHES | 1 | |
| 906050 | MEASURING DEVICE | 1 | |
| 906051 | MEASURING DEVICE | 1 | |
| 906052 | MEASURING DEVICE | 1 | |
| 906058 | MEASURING DEVICE | 1 | |
| 906061 | MEASURING DEVICE | 1 | |
| 906063 | MEASURING DEVICE | 1 | |
| 906067 | MEASURING DEVICE | 1 | |
| 906070 | MEASURING DEVICE | 1 | |
| 906074 | MEASURING DEVICE | 1 | |
| 906075 | MEASURING DEVICE | 1 | |
| 906080 | MEASURING DEVICE WITH HOLDING FIXTURE | 1 | |
| 906224 | BALL ADAPTER BEARING | 1 | |
| 906258 | SUPPORTING RING WITH MEASURING ADAPTER | 1 | |
| 988703 | Infa Red Mini Ray - soldering/ heat shrink | 1 | |
| 995011 | SEALING STRAP AND SOLDE-RING FIXTURE | 1 | |
| 997112 | RTD WIRING HARNESS | 3 | |
| 998965 | POWER SUPPLY FOR SOLENOID DURING PRESSURE TEST | 1 | |
| 2000108 | Reducer for TB3/TB125. Includes ball lock pin for securing reducer in towbar. Converts 3-1/4" ID multi-head bar to 3" ID to allow smaller corporate heads to fit larger bar. | 1 | |
| 2000160 | TB125-15 Split (15-foot) aluminum towbar with linear shear protection and limited tow-eye rotation. NOTE: Designed for towing applications requiring more tug-aircraft clearance (such as for Falcon aircraft), this towbar is a two-piece bar consisting of | 1 | |
| 2000443 | BEC2 towbar head for Beech King Air; 1900, C-12 Huron and Merlin 11, Emivest (Sino-Swearingen) SJ30-2. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer). | 1 | |
| 2000488 | SMW1 towbar head for Metro and Merlin aircraft. Fairchild (Swearingen) Merlin and Fairchild Aerospace Metro II, III & 23 aircraft. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer) | 1 | |
| 2001039 | Universal Towbar with RING HITCH, PN: 34R, handles aircraft up through King Air series, 14,000 lbs. (6,350 kg) Max Capacity. | 1 | |
| 2001153 | Rx towbar for Lockheed Martin C-130 Series aircraft family. Heavy duty steel towbar features linear & radial shear protection, hydraulic lift kit, road speed rated wheels-hubs and bearing. 15 foot long towbar ships fully assembled except for tube haves | 1 | |
| 2001182 | Specialties low-level twin folding maintenance stand provides safe and easy transport access for aircraft maintenance and rolling stock inspection. Featuring an incredibly versatile folding design, the locking top portion of the stand can be folded up, ac | 1 | |
| 2001370 | Helicopter towbar System for CH-47 (Chinook) Helicopter. Towbar attaches to right rear wheel with convenient to use spring loaded slide pin and auxiliary tow head attaches to left rear wheel and a tie rod is pinned between the two tow heads this allows b | 1 | |
| 2001381 | Helicopter towbar is designed to fit the 2" rings on the skid tubes on Bell 212, 412, 429, UH-1, AH-1 | 1 | |
| 2001382 | Military/civilian helicopter towbar for BELL UH-1, 205, 212, 412 Types.Designed for one man operation. This tow bar is designed for the Bell Helicopters with the 4" skid tubes and 2" tow rings. This towbar eliminates the need for a man on the stinger. Th | 1 | |
| 2001771 | WWC500 Low Profile Potable Waste Water Service Cart. Features:- Heavy Duty RJ3 Galvanized Trailer with 5th-wheel steering and 5.70x8 tires.- 500 Gallon Polyethelene UV Rated, Rotationally Molded Tank. With 8" center lid and 16" rear lid. 90 degree dump | 1 | |
| 2001823 | Gulfstream G2-G650 aircraft towbar. Fits G2, G300-350, G400-450, G5-500/550/650. Includes TB125 multi-head aircraft towbar and G2-650 towbar head (000194 TB125 + 000582 G2-650 towbar head). NOTE: Crating is required for protection of towbars during tra | 1 | |
| 2001995 | TB125-15 (15-foot) aluminum towbar with linear shear protection and limited tow-eye rotation. NOTE: Designed for towing applications requiring more tug-aircraft clearance (such as for Falcon aircraft), this towbar is a one piece bar. It has the same 125 | 1 | |
| 2003138 | towbar for Lockheed Martin C-130 Series aircraft with FLIR. Heavy duty steel towbar features linear & radial shear protection, road speed rated wheels-hubs and bearing. | 1 | |
| 2004013 | 2795 Single LD1/LD2/LD3 Container Dolly/Trailer, 3500 lb. capacity, handles (1) ea LD1/LD2 or LD3 container, handles, 4 WHEEL STEERING (Double Ackerman). | 1 | |
| 2004049 | 2890 Double LD2/LD3 Dolly. 7000 lb. capacity, handles (2) ea LD2/LD3 or (1) LD8/LD11 container, unit comes standard with 2 WHEEL Ackerman steering. | 1 | |
| 2004055 | Model 3680 roller deck pallet trailer with side loading: 96"x125" & 88" x 125" spring loaded stops, grip strut walkway, 15,000 Lb cargo capacity, heavy-duty applications. | 1 | |
| 2004084 | Model 3083 20' Roller Deck Side Load Pallet Trailer. Pallet capacity: (2) 96"x125" OR (1) 96"X240" pallet. Spring loaded stops, grip strut walkways, 30,000 lbs. cargo capacity, heavy-duty applications. | 1 | |
| 2004789 | Lightweight Universal Towbar, Ring Hitch - good for hand or tug towing of aircraft. 4,000 lbs. Max Capacity. | 1 | |
| 2004790 | Brackett Lightweight Universal Towbar featuring Class II, 2" Ball Hitch, good for hand or tug towing of aircraft. 4,000 Lbs. Max Capacity. | 1 | |
| 2007273 | Pilatus PC12 towbar with integrated tow head. 2-piece,slide together steel bar with shock ring hitch. | 1 | |
| 2007274 | RL-WLF10 Wipline Float Towbar for use on aircraft with Wipline and Aeroset floats. Available in Ring(R) or Ball (B) Hitch. | 1 | |
| 2007670 | Universal Towbar with RING HITCH, PN: 53R, handles aircraft up to 7000 Lb. Max Capacity. Length: 80" (203 cm) closed, 94" (234 cm) extended. | 1 | |
| 2007693 | STATION SOLDERING | 1 | |
| 2007762 | TR-6B Towbar for towing tail wheeled aircraft; P-51, T6, Stearman, Beechcraft Model 18, staggering, etc. | 1 | |
| 2007763 | TR-6B Ball Hitch (Class II, 2 Inch) Towbar for towing tail wheeled aircraft; P-51, T6, Stearman, Beechcraft Model 18, staggering, etc. | 1 | |
| 2007831 | Flat Tire Dolly with 6,000 lbs. capacity (can be also used as a Towbar if needed), equipped with ring type hitch. Specifications: Length - 12 feet (3.65m); Pan - 20" x26" (50.8cm x 66cm) L; Weight - 300 lbs (136kg); Pan Capacity - 6,000 lb (2721.5kg); Wi | 1 | |
| 2016678 | PV45-1 (208-480V input) 90kVA, 400 Hz Solid-State GPU, USA Model. Specify one of the following input voltages when ordering: 208, 240, 400, 480 - x2 Cable horns (no cable tray) - Exclusions: input lead / output lead / shipping crate | 1 | |
| 2020323 | TRU-28 (208-480V input). 28VDC tranformer/rectifier Specify one of the following input voltages when ordering: 208, 240, 400, 480 - Exclusions: input lead / output lead / shipping crate | 1 | |
| 2550730 | Adapter – Bearing Sleeve assy. | 1 | |
| 2558111 | DRIVER, TAPERED BEARING CUP INSTALLATION AND REMOVAL (INBOARD) | 1 | |
| 2558440 | DRIVER, TAPERED BEARING CUP INSTALLATION AND REMOVAL (OUTBOARD) | 1 | |
| 2558442 | DRIVER TAPERED BEARING CUP | 1 | |
| 2558450 | DRIVER, TAPERED BEARING CUP INSTALLATION AND REMOVAL (OUTBOARD) | 1 | |
| 2558454 | DRIVER, BEARING CUP INSTALLATION | 1 | |
| 2558456 | DRIVER KIT, BEARING CUP REMOVAL | 1 | |
| 2558458 | DRIVER, BEARING CUP INSTALLATION | 1 | |
| 2558460 | DRIVER KIT, BEARING CUP REMOVAL | 1 | |
| 2558537 | DRIVER, BEARING AND BUSHING | 1 | |
| 2558538 | Driver Bearing Cup | 2 | |
| 2558546 | IB&OB BEARING CUP INSTALL DRIVER | 5 | |
| 2558548 | BEARING CUP REMOVAL DRIVER | 5 | |
| 2558601 | DRIVER, BEARING AND BUSHING | 1 | |
| 2558602 | DRIVER BEARING AND BUSHING | 1 | |
| 2558607 | DRIVER, BEARING CUP REMOVAL (3 IT) | 1 | |
| 2558608 | DRIVER,BEARING CUP INSTAL., INBOARD (6IT) | 1 | |
| 2558609 | DRIVER,BEARING CUP INSTAL., OUTBOARD | 1 | |
| 2558620 | DRIVER TAPERED BEARING CUP | 3 | |
| 2558628 | DRIVER BEARING CUP INSTALLATION | 1 | |
| 2558629 | BEARING CUP INST. ADAPTER | 4 | |
| 2558630 | DRIVER BEARING CUP REMOVAL | 1 | |
| 2558631 | DRIVER BEARING CUP REMOVAL | 1 | |
| 2558636 | DRIVER BEARING BUSHING | 1 | |
| 2558641 | DRIVER TAPERED BEARING CUP | 1 | |
| 2558643 | DRIVER TAPERED BEARING CUP | 1 | |
| 2558680 | DRIVER, BEARING CUP REMOVAL, OUTBOARD WHEEL HALF | 1 | |
| 2558681 | DRIVER, BEARING CUP REMOVAL, INBOARD WHEEL HALF | 1 | |
| 2558693 | Screwed Ring | 1 | |
| 2558694 | ASSEMBLY FIXTURE USED DURING ASSEMBLY AND DISASSEMBLY OF THE BRAKE TIE BOLTS. | 2 | |
| 2558711 | SUPPORT DRIVER BEARING CUP | 1 | |
| 2558712 | DRIVER, BEARING CUP REMOVAL | 1 | |
| 2558723 | OUTBOARD WHEEL HALF BEARING CUP INSTALLATION DRIVER | 1 | |
| 2558724 | OUTBOARD WHEEL HALF BEARING CUP REMOVER DRIVER | 1 | |
| 2558726 | INBOARD WHEEL HALF BEARING CUP INSTALLATION DRIVER | 1 | |
| 2558727 | INBOARD WHEEL HALF BEARING CUP REMOVER DRIVER | 1 | |
| 2558738 | DRIVER, BEARING CUP REMOVAL, IB | 1 | |
| 2558747 | DRIVER, BEARING CUP INSTALLATION, IB WHEEL HALF | 1 | |
| 2558748 | DRIVER, BEARING CUP INSTALLATION, OB WHEEL HALF | 1 | |
| 2558755 | DRIVER BEARING CUP REMOVAL | 1 | |
| 2558782 | DRIVER, BEARING CUP REMOVAL, IB AND OB WHEEL HALF | 1 | |
| 2558783 | FIXTURE, BEARING CUP/SLEEVE REMOVAL, IB AND OB WHEEL HALF | 1 | |
| 2558785 | SNAP RING, BEARING CUP/SLEEVE REMOVAL, IB WHEEL HALF,USED WITH KIT P/N 2558782 | 1 | |
| 2558786 | INBOARD WHEEL-HALF, BEARING CUP REMOVAL DRIVER | 1 | |
| 2558787 | REMOVAL DRIVER RETAINING RING | 1 | |
| 2558788 | OUTBOARD WHEEL-HALF, BEARING CUP REMOVAL SUPPORT ADAPTER | 1 | |
| 2558806 | IB AND OB WHEEL HALF BEARING CUP SUPPORT ADAPTER | 4 | |
| 2558807 | INBOARD & OUTBOARD WHEEL HALF BEARING CUP SUPPORT ADAPTER | 3 | |
| 2558816 | BEARING CUP REMOVAL (OB) 2558818 AND 2 | 1 | |
| 2558817 | BEARING CUP REMOVAL (IN) 2558819 AND | 1 | |
| 2558818 | OB bearing cup assembly removal dr. | 3 | |
| 2558819 | DRIVER，BEARING CUP ASSY REMOVAL | 4 | |
| 2558820 | BEARING CUP AY. REMOVED SNAP RING | 3 | |
| 2558839 | DRIVER BEARING | 1 | |
| 2558840 | DRIVER, BEARING CUP REMOVAL, INBOARD WHEEL HALF | 1 | |
| 2558842 | ASSEMBLY SHIM USED TO PREVENT TOO MUCH ADJUSTER PULL THROUGH DURING LEAKAGE TEST. | 1 | |
| 2558847 | DRIVER, BEARING CUP, INSTALLATION, IB | 1 | |
| 2558848 | BEARING CUP REMOVAL DRIVER | 1 | |
| 2558859 | Driver Bearing cup removal inboard wheel half | 1 | |
| 2558860 | Driver bearing cup removal outboard wheel half | 1 | |
| 2558861 | Driver Bearing cup instalaltion inboard wheel half | 1 | |
| 2558862 | Driver Bearing cup installation outboard half | 1 | |
| 2558912 | ADJUSTER-ASSY,SPRING | 1 | |
| 2559694 | DRIVER BEARING, NLG STRUT | 1 | |
| 2560857 | BEARING IDENTIFICATION TOOL | 1 | |
| 2560872 | IB AND OB WHEEL HALF BEARING CUP SUPPORT ADAPTER | 1 | |
| 2560877 | DRIVER-BEARING,CUP | 1 | |
| 2560908 | BEARING REMOVAL SUPPORT ADAPTER | 1 | |
| 2560910 | BEARING CUP INSTALLATION DRIVER | 1 | |
| 2561515 | Special Index Ring | 1 | |
| 2561588 | Depressor, spring | 2 | |
| 2585565 | BEARING ASSEMBLY HOLDER | 1 | |
| 2612526 | ASSY BEARING CUP AND SLEEVE | 1 | |
| 2615479 | ASSY BEARING CUP AND SLEEVE | 1 | |
| 3013899 | SEAL AND GARTER SPRING | 1 | |
| 3059719 | WEBECTM (ENGINE CONTROL TRAND MONITORING)(SUBSCRIPTION FROM PWC) | 1 | |
| 3961970 | WIRING DIAGRAM | 1 | |
| 5012373 | AIRCRAFT TIRE BEAD BREAKER ADAPTER RINGS | 1 | |
| 5012599 | HOLDER , SPRING | 1 | |
| 5013266 | HOLDER SUBASSEMBLY,SPRING | 1 | |
| 5304254 | SHIELD ASSY OF HEAT #6 BEARING | 1 | |
| 5305427 | ADAPTER ASSY OF TUBE TO BOSS,OIL SUPPLY #5-6 BEARING | 1 | |
| 5609250 | TESTO TEMP MEASURING DCVICE NO SENS | 1 | |
| 5953604 | WIRING DIAGRAM | 1 | |
| 5953925 | WIRING DIAGRAM | 1 | |
| 5962514 | WIRING DIAGRAM | 1 | |
| 6037500 | DRIBBLE FLOW TEST FIXTURE USED ON THE LARGE NOZZLE METERING TIPS FOR DRIBBLE FLOW TEST. | 1 | |
| 6037501 | DRIBBLE FLOW TEST FIXTURE USED ON THE SMALL NOZZLE METERING TIPS FOR DRIBBLE FLOW. | 1 | |
| 6723058 | GO THREAD RING GAGE | 1 | |
| 6723059 | NO GO THREAD RING GAGE | 1 | |
| 6781077 | Spring – Drain Valve | 1 | |
| 6795590 | PULLER BEARING, GAS PRODUCER TURBINE | 4 | |
| 6795635 | INSTALL/REMOVAL GAS PRODUCER TAIL ROTOR BEARING NU | 2 | |
| 6795637 | WRENCH INSTALLATION AND REMOVAL GAS PRODUCER TURBINE REAR BEARING RETAINING NUT | 2 | |
| 6795644 | WRENCH INSTALLATION AND REMOVAL GAS PRODUCER TURBINE FRONT BEARING RETAINING NUT | 2 | |
| 6795990 | DUMMY BEARING POWER TURBINE SHAFT FRONT | 2 | |
| 6795992 | Dummy Bearing | 2 | |
| 6796107 | SPACER, BEARING, ROTOR DYNAMIC BAL | 1 | |
| 6796169 | GUIDE PIN - COMPRESSOR REAR SEAL AND BEARING | 2 | |
| 6796178 | PULLER - MAIN REDUCTION GEAR BEARING OUTER RACE | 2 | |
| 6796190 | DRIVER - COMPRESSOR REAR BEARING AND SEAL | 2 | |
| 6796194 | FRONT BEARING OUTER RING DRIFT | 2 | |
| 6796203 | PULLER PLATE - ACCESSORY MAIN DRIVE SHAFTGEAR BEARINGS | 2 | |
| 6796204 | PULLER PLATE - ACCESSORY MAIN DRIVE SHAFT BEARING | 4 | |
| 6796205 | PULLER PLATE - SIDE ACCESSORY DRIVE SHAFT GEAR BEARINGS | 3 | |
| 6796214 | PULLER PLATE - STARTER IDLER GEAR REAR BEARING | 2 | |
| 6796215 | PULLER PLATE - STARTER IDLER GEAR FRONT BEARING | 2 | |
| 6796249 | SUPPORT - ACCESSORY DRIVE BEARING REMOVAL | 2 | |
| 6796437 | ADAP, HOLDER, BORING TOOL | 1 | |
| 6796524 | PLATE - PULLER, DRIVE SHAFT ASSEMBLY BEARING INNER RACE | 2 | |
| 6796525 | DRIFT - DRIVE SHAFT ASSEMBLY BEARING INNER RACE | 2 | |
| 6796590 | Bearing Drive Shaft Assy | 1 | |
| 6796651 | EXPANDER - PROPELLER SHAFT THRUST BEARING SEAL | 2 | |
| 6796652 | WRENCH AND HOLDER - TURBINE FRONT BEARING RETAINER NUT | 2 | |
| 6796736 | DRIFT - TURBINE FRONT BEARING INNER RACE | 2 | |
| 6796768 | FIX BORING COMP HSG CORRUGATED CUTTING TOOL | 1 | |
| 6796895 | 1ST STAGE COMP. BLADE RET. RING PRY BAR | 1 | |
| 6796920 | PULLER OIL JET GAS PRODUCER BEARING | 2 | |
| 6796930 | PLATE INTALLATION POWER AND ACCESSORY GEARBOX BEARING | 2 | |
| 6796945 | FIXTURE – INSPECTION, OUT OF ROUD BEARING OUTER RING | 1 | |
| 6796946 | BRIFT INSTALLATION AND REMOVAL POWER AND ACCESSORY GEARBOX BEARING | 2 | |
| 6796947 | DRIFT INSTALLATION AND REMOVAL POWER AND ACCESSORY GEARBOX TORQUEMETER BEARING | 2 | |
| 6796948 | Drift â Installation and Removal, Accy GB Power Turbine Drive Bearings | 2 | |
| 6796949 | DRIFT INSTALLATION POWER AND ACCESSORY GEARBOX BEARINGS | 2 | |
| 6796950 | Puller Kit â Bearing, Accessory Gear Box (Includes Hardwood Case | 2 | |
| 6796952 | Puller â Forward Bearing & Seal, Compressor | 2 | |
| 6796966 | PLIERS RETAINING RING FUEL CONTROL DRIVE BEARING | 2 | |
| 6796971 | PULLER, BEARING AND SEALS, FRONT COMPRESSOR LABYRINTH | 3 | |
| 6796974 | PLIERS - REMOVAL AND INSTALLATION, LOW PRESSURE FUEL FILTER RETAINING RING | 2 | |
| 6796976 | DEPRESSOR - SPRING, LOW PRESSURE FUEL FILTER ELEMENT SUPPORT | 2 | |
| 6796978 | ADAPTER - RING | 1 | |
| 6797023 | GUIDE - TURB REARBRG SEAL RING | 1 | |
| 6797284 | BEARING PULLER, MAIN DRIVE GEAR | 1 | |
| 6797386 | EXPANDER, PROPELLER SHAFT THRUST BEARING SEAL | 1 | |
| 6797645 | GAGE, RING, MAIN DR. GEAR BRG. | 1 | |
| 6797649 | PLATE – GUIDE, ROLLER BEARING | 1 | |
| 6797654 | ADAP, RING, INT. CLEARANCR CHECK | 1 | |
| 6797658 | ADAP, RING, INT. CLEARANCR CHECK | 1 | |
| 6797708 | PULLER, COMPRESSOR REAR BEARING & DOUBLE LABYRINTH SEAL | 2 | |
| 6797753 | GUIDE, TORQUEMETER MIDBEARING | 2 | |
| 6797756 | PUSHER, TQ MID BEARING INNER RACE | 2 | |
| 6797757 | PLATE PULLER TORQUEMETER MID BEARING | 3 | |
| 6797877 | PUSHER AND PULLER – MID BEARING TORQUEMETER FORWARD | 2 | |
| 6797881 | RETAINER, MID-BEARING TORQUEMETER BEARING ROLLER | 2 | |
| 6797939 | COMPRESSOR - 3.921 INCH OD SPLIT SEAL RING | 2 | |
| 6797940 | COMPRESSOR - 6.250 OD SPLIT SEAL RING | 2 | |
| 6797968 | ADAPTER, RING, INT. CLEARANCE CH. | 1 | |
| 6798042 | INSTRUMENTED EXHAUST RINGS | 2 | |
| 6798046 | WRENCH-BEARING LOCKNUT, GAS PRODUCER | 2 | |
| 6798796 | DRIFT-VIBRATION DAMPER, COMPRESSOR FRONT BEARING | 3 | |
| 6798804 | DRIVE SHAFT GEAR BEARING PULLER - TACHOMETER DRIVE OIL | 2 | |
| 6799083 | GUIDE, TURBINE REAR BEARING | 1 | |
| 6799518 | PULLER—GAS PRODUCER BALL BEARING LABYRINTH SEAL ASSEMBLY | 1 | |
| 6799614 | PULLER - HYDRAULIC, GEARBOX PINION FRONT BEARING | 1 | |
| 6799622 | Puller, Rear Turbine Bearing and Seal | 2 | |
| 6799634 | GUIDE - TURBINE FRONT BEARING INNER RACE AND ROLLER | 2 | |
| 6799643 | PULLER - HYDRAULIC, GEARBOX PINION REAR BEARING | 1 | |
| 6799650 | FIXTURE – WELD, TURBINE REAR BEARING SUPPORT | 2 | |
| 6799700 | PULLER-VIBRATION DAMPER, COMPRESSOR FRONT BEARING | 3 | |
| 6799745 | HALF BEARING, FRONT, ROTOR DYNAMIC BAL | 1 | |
| 6799766 | HALF BEARING, REAR, TURBINE ROTOR DYNAMIC BAL | 1 | |
| 6799795 | GAGE, RING, MAIN DR. GEAR BRG. | 1 | |
| 6799803 | GUIDE - TURBINE REAR BEARING | 2 | |
| 6800372 | MID BEARING SHIPPING PLUG | 1 | |
| 6803035 | TURNING FIXTURE, COVER HOLDS COVER DURING CUTOFF SURFACE REPAIR PROCEDURE. | 1 | |
| 6833108 | PURGE FIXTURE, ARGON, INLET COVER (NOT ILLUS- CONNECTS ARGON SUPPLY TO NOZZLE TRATED) INLET DURING COVER WELD PROCEDURE. | 1 | |
| 6872505 | FIXTURE - AIR FLOW MEASURING 3RD STAGE | 1 | |
| 6872543 | PRESS INSTALLATION POWER TURBINE REAR AND GAS PRODUCER TURBINE FRONT BEARING | 2 | |
| 6872575 | PIN RINGGING COORDINATOR LINKAGE | 2 | |
| 6872646 | GUIDE一SPUR ADAPTER GEARSHAFT BEARING | 2 | |
| 6872746 | PULLER—POWER TRAIN DRIVE GEAR BEARING | 1 | |
| 6872758 | TEMPLATE GEARBOX HOUSING AND COVER BEARING BORE | 1 | |
| 6877001 | TACK WELD FIXTURE, COVER HOLDS FUEL NOZZLE COMPONENTS IN POSITION DURING INLET COVER TACK WELD PROCEDURE. | 1 | |
| 6877004 | STEM STRAIGHTENING FIXTURE HOLDS FUEL NOZZLE WHILE ADJUSTING METERING TIP POSITION. | 1 | |
| 6877005 | HOLDING FIXTURE, VALVE END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF VALVE END COMPONENTS. | 1 | |
| 6877006 | HOLDING FIXTURE, CHECK VALVE PLUG HOLDS FUEL NOZZLE DURING MACHINING OF CHECK VALVE PLUG WELD. | 1 | |
| 6877010 | HOLDING FIXTURE, TIP END HOLDS FUEL NOZZLE DURING CUTTING, MACHINING, AND WELDING OF TIP END COMPONENTS. | 1 | |
| 6877011 | HOLDING FIXTURE, FINAL TEST HOLDS FUEL NOZZLE/COMPONENTS ON SPRAY CHAMBER DURING ASSEMBLY AND TESTING. | 1 | |
| 6877012 | HOLDING FIXTURE, PRESSURE TEST HOLDS FUEL NOZZLE COMPONENTS DURING TESTING AND CLEANING OPERATIONS. | 1 | |
| 6877014 | PURGE FIXTURE, AIR (CHECK VALVE REMOVAL) BACK PRESSURES FUEL NOZZLE TO BLOW CHIPS OUT OF NOZZLE DURING CHECK VALVE MACHINING OPERATION. | 1 | |
| 6877015 | PURGE FIXTURE, ARGON, PRIMARY BODY PROVIDES ARGON PURGE CONNECTION DURING PRIMARY BODY WELDING PROCEDURE. | 1 | |
| 6877016 | PURGING AND HEAT SINK FIXTURE (FOR NOZZLES PROVIDES ARGON PURGE CONNECTION WITH WEAR SLEEVES) AND DISSIPATES HEAT DURING SECONDARY BODY WELDING PROCEDURE. | 1 | |
| 6877017 | PURGING AND HEAT SINK FIXTURE (FOR NOZZLES PROVIDES ARGON PURGE CONNECTION WITHOUT WEAR SLEEVES) AND DISSIPATES HEAT DURING SECONDARY BODY WELDING PROCEDURE. | 1 | |
| 6877019 | THERMAL CLEANING FIXTURE HOLDS SUPPORTS DURING PYROLYTIC CLEANING. | 1 | |
| 6877021 | SEAL FIXTURE, SECONDARY ORIFICE (WITH INLET SIMULTANEOUSLY CONNECTS METERING AND EXIT HOSE) TIP AND INLET OF FUEL NOZZLE ASSEMBLY TO PRESSURE SOURCE FOR PROOF TESTING. | 1 | |
| 6877022 | IN-PROCESS INSPECTION FIXTURE USED TO MEASURE CRITICAL DIMENSIONS DURING DISASSEMBLY AND REPAIR OPERATIONS. | 1 | |
| 6877023 | SECONDARY SUPPORT RING ADAPTER | 1 | |
| 6877024 | TACK WELD FIXTURE, PRIMARY AND SECONDARY HOLDS SUPPORT AND METERING SET BODY COMPONENTS IN POSITION DURING TACK WELD OPERATIONS. | 1 | |
| 6877025 | SEAL RING ADAPTER FIXTURE VALVE END | 1 | |
| 6877026 | "COO WASHER ASSEMBLY/ DISASSEMBLY TOOL COMPRESSES SPRING IN CARTRIDGE VALVE FOR INSTALLATION/REMOVAL OF SLOTTED WASHER. | 1 | |
| 6877028 | STEM HOLDING FIXTURE HOLDS WEAR SLEEVE AND FUEL NOZZLE IN POSITION DURING TACK WELD OPERATION. | 1 | |
| 6877030 | DRILL FIXTURE, FLANGE PIN HOLDS SUPPORT DURING DRILLING OF FLANGE PINHOLE TO ENSURE CORRECT LOCATION. | 1 | |
| 6885016 | ELECTRONIC ANGLE DEVICE RADIAL PATTERNATOR CHECKS FUEL SPRAY ANGLE DURING FLOW TESTS. | 1 | |
| 6886201 | GUIDE一POWER TAKEOFF ROLLER BEARING | 1 | |
| 6887819 | Fixture â Checking, Gas Producer and Power Turbine Supports Bearing Bores | 2 | |
| 6893379 | DRIFT, POWER TRAIN DRIVE GEAR BEARINGS | 2 | |
| 6893381 | PULLER - POWER TRAIN DRIVE GEAR BEARING | 2 | |
| 6893385 | GUIDE, POWER TAKEOFF ROLLER BEARING | 1 | |
| 6893390 | TQMTR. SUPPORT SHAFT RLR. BEARING DRIFT | 2 | |
| 6893397 | INSTALL FUEL PUMP SPLINED ADAPTER BEARING DRIFT | 2 | |
| 6893512 | DRIFT BEARING IDLER & CENT BREATHER | 2 | |
| 6893514 | DRIFT BEARING FUEL PUMP STRT. GENERATOR | 2 | |
| 6893518 | DRIFT BEARINGS | 2 | |
| 6893522 | BEARING IDLER GEARSHAFT DRIFT | 2 | |
| 6893526 | PLIERS, RETAINING RING, FUEL PUMP-FUEL CTRL DRIVE BEARING | 2 | |
| 6893532 | DIRFT - FRONT AND REAR BEARING | 2 | |
| 6893739 | PULLER--COMPRESSOR REAR BEARING, OIL SLINGER AND SEAL | 2 | |
| 6895538 | PRESS一GAS PRODUCER TURBINE ROTOR AND BEARING | 1 | |
| 6897006 | PRESSURE TEST FIXTURE, INLET COVER HOLDS INLET COVER IN POSITION DURING WELD REPAIR PRESSURE TEST. | 1 | |
| 6897010 | AUTOMATIC WELDING LATHE HOLDS AND CONTROLS ROTATION OF COMPONENTS DURING WELDING PROCEDURES. | 1 | |
| 6897099 | TEST STRIP HOLDER HOLDS TEST STRIP DURING SHOT PEEN MACHINE CALIBRATION. | 1 | |
| 6897100 | TEST STRIP HOLDER HOLDS TEST STRIP DURING SHOT PEEN MACHINE CALIBRATION. | 1 | |
| 6897101 | TEST FIXTURE, INLET PLUG PROVIDES SEPARATE PRIMARY AND SECONDARY INLET FLUID CONNECTIONS DURING SUPPORT TESTING. | 1 | |
| 6897102 | PRIMARY SUPPORT RING FIXTURE LOCATES AND SEALS PRIMARY TO SUPPORT JOINT DURING PREWELD TESTING. | 1 | |
| 6897103 | HOLDING FIXTURE, TIP SEAL HOLDS METERING SET SEAL FIXTURES ON FUEL NOZZLE FOR PRESSURE TESTING. | 1 | |
| 6897104 | SEAL FIXTURE, PRIMARY ORIFICE PLUGS PRIMARY ORIFICE DURING PAST WELD PRESSURE TEST, NO SECONDARY PRESENT. | 1 | |
| 6897105 | SEAL PLUG, CHECK VALVE SEALS CHECK VALVE BORE DURING FUEL NOZZLE ASSEMBLY TESTS. | 1 | |
| 6897106 | PRE QUALIFYING FIXTURE, CARTRIDGE VALVE HOLDS CARTRIDGE VALVE DURING PRE QUALIFYING TESTING. | 1 | |
| 6897107 | PRE QUALIFYING FIXTURE, CHECK VALVE HOLDS CHECK VALVE DURING TESTING. | 1 | |
| 6977602 | FLOW DIVIDER VALVE PREQUAL FIXTURE HOLDS CARTRIDGE VALVE DURING PREQUALIFYING TESTING. | 1 | |
| 7001276 | WIRING DIAGRAM, AIR INLET, TEST FIXTURE APS5000 | 1 | |
| 7134770 | SET OF SHORING FOR H MODELS (CRADLES) | 1 | |
| 9048049 | SPRING-CAGED ..POST SB 74-0002 | 1 | |
| 9222237 | REFLECTION RING/DONUT (ENCIRCLING) PROBE SPO-2031 RRL/100Hz-10Khz/.30-.80 (NDT) | 1 | |
| 9316874 | SPRING HOUSING ASSEMBLY FOR S-MP-3(U8010011), S-MP-3L (U8770345), S-MP-4 (U8010015) AND S-MP-4L (U87 | 1 | |
| 9317797 | 9317797 : BROAD BAND FREQUENCY S-PC-P11 PITCH-CATCH PROBE, BROADBAND FREQUENCY, SPRING LOADED TIPS, | 1 | |
| 9317808 | RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES BMM-H (U8770417) FOR SPRING LOAD | 1 | |
| 9322075 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| 9322184 | SPO-5629PHV 1/2 X 1/2 BI-MORPH HIGH VOLTAGE PITCH CATCH, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING L | 1 | |
| 9323945 | S-PC-P14 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 1 | |
| 9323952 | S-PC-P16 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 1 | |
| 9953924 | PRINTED WIRING BOARD | 1 | |
| 21200200 | BEARING RADIUS INSP PROBE: PROBE 0.020 | 1 | |
| 23003262 | CRIMPER-LOCKNUT, GAS PRODUCER TURBINE REAR BEARING . CRIMPS THE GAS PRODUCER TURBINE REAR BEARING LOCKNU | 2 | |
| 23005023 | PULLER-FORWARD BEARING AND SEAL FOLLOWER | 3 | |
| 23005426 | C30- 2&1/2 Bearing Guide | 4 | |
| 23006764 | GAGE-RETAINING RING, SPUR ADAPTER GEAR SHAFT | 2 | |
| 23006778 | C20- 2&1/2 Bearing Guide | 5 | |
| 23006780 | RING----SPLINED, SPUR ADAPTER GEAR, BALANCE | 2 | |
| 23006785 | INSTALLA ON TOOL-SPUR ADAPTER GEAR O-RING | 2 | |
| 23007615 | OIL SUMP AND BEARING PASSAGE CLEANING KIT: RR250 SERIES | 3 | |
| 23007694 | BRACKET - VIBRATION MONITORING, REDUCTION GEAR MAINTENANCE TEST | 2 | |
| 23008668 | GUIDE----NO. 2 BEARING BALLS | 1 | |
| 23008674 | RING – CONCENTRICITY, 2ND STAGE TURBINE SPLINED ADAPTER | 2 | |
| 23033027 | PULLER BEARING AND MATTING SEAL RACE COMPRESSOR FRONT | 2 | |
| 23033030 | DRIFT--INSTALLATION, COMPRESSOR FRONT BEARING INNER RACE AND SEAL | 1 | |
| 23033031 | FIXTURE--HOLDING, FRONT BEARING HOUSING 7 | 1 | |
| 23033032 | DRIFT--COMPRESSOR FRONT BEARING OUTER RACE | 1 | |
| 23033033 | DRIFT--GUIDED, COMPRESSOR FRONT BEARING RING SEAL | 1 | |
| 23033038 | MASK--SPRAY, COMPRESSOR ROTOR DIFFUSER MASKS THE REAR DIFFUSER AND NO. 2 BEARING BORE DURING APPLICATION OF SPRAY COATING FOR LABYRINTH S | 1 | |
| 23033041 | RINGS--INSPECTION AND GRINDING, COMPRESSOR STATOR VANE ID | 1 | |
| 23034275 | ADAPTER--PILOT, COMPRESSOR REAR BEARING PULLER U | 1 | |
| 23052518 | Pusher – Hydraulic, Power Turbine Front Bearing Inner Race | 1 | |
| 23052523 | Puller – Compressor Aft Bearing Inner Races & Forward Oil Impeller | 1 | |
| 23052536 | Pusher – Radial DR Gear-shaft Bearings, PU Access DR | 1 | |
| 23053554 | Wrench – Power Turbine Aft Bearing And Seal Nut | 1 | |
| 23053591 | Wrench & Holder - Spanner, Front Bearing Retaining Nut | 1 | |
| 23053592 | Wrench & Holder – Compressor Aft Bearing Retaining Nut | 1 | |
| 23053682 | Ring – Heat Transfer 2nd & 3rd Stage Wheel, LPT Rotor | 1 | |
| 23053683 | Ring – Heat Transfer 1st & 2nd Stage Wheel, LPT Rotor | 1 | |
| 23053688 | Ring - Cryogenic, 2nd Stage Wheel Forward Shaft, LPT Rotor | 1 | |
| 23053694 | Ring – Heat Transfer 2nd Stage Wheel, LPT Rotor | 1 | |
| 23054778 | Pusher – Radial Drive Gearshaft Bearing Removal | 1 | |
| 23054787 | Ring - Cryogenic,2nd & 3rd Stator Wheel Assembly, LP Turbine Rotor | 1 | |
| 23054806 | Wrench & Holder – Fan Shaft Bearing Retaining Nut | 3 | |
| 23054807 | PUSHER, FAN SHAFT SPACER AND BEARING SEAL RUNNER. | 3 | |
| 23054808 | Holder – Pusher, Seal Runner – Spacer and Bearing, Fan Shaft | 3 | |
| 23054809 | PLATE, FAN SHAFT SPACER AND BEARING PULLER SEAL RUNNER. | 2 | |
| 23055250 | Guide - #4 Bearing, Aft Compressor Center Sump | 1 | |
| 23055252 | Guide - #1 Bearing, Front Sump | 1 | |
| 23055343 | Gage - Checking, Bearing End Play | 1 | |
| 23055344 | PULLER - TURBINE REAR BEARING AND SEAL | 1 | |
| 23058405 | Fixture – Arbor Press, Separate Damper From No. 5 Bearing | 1 | |
| 23058410 | Puller – No.5 Bearing and Damper | 1 | |
| 23058457 | Dimple Tool – Cup Washer, No.2 Bearing And Internal Bevel Gear | 1 | |
| 23058478 | Ring – Guide, 1st Stage Wheel Wire Seal Ring | 1 | |
| 23058483 | Fixture – Alignment, 2nd Stage Vane Ring To Case | 1 | |
| 23066587 | Pusher – Mid Span Housing Bearing | 1 | |
| 23068461 | Rings – Low Pressure Turbine Dummy Vane | 1 | |
| 23068572 | Ring – Pilot, (Round Up) Compressor Case, Rear | 1 | |
| 23068573 | Ring – Pilot, (Round Up) Compressor Case, Front | 1 | |
| 23068576 | GAGE , MID SPAN BEARING PLUG | 1 | |
| 23068604 | Guide – No. 3 Bearing | 1 | |
| 23076497 | TORQUEMETER MID BEARING GUIDE | 1 | |
| 23087793 | Pusher – Hydraulic, No. 4 Bearing Inner Race | 1 | |
| 23089389 | BEARING SEAL HOLDER | 2 | |
| 23090504 | PACKING PTFE SPRING ENEGIZED | 1 | |
| 25558629 | IB WHEEL HALF BEARING CUP INSTALLER ADAPTER | 1 | |
| 26000900 | TONE AND PROBE WIRING TESTER | 1 | |
| 41030608 | 220.6.X.8-6 X 8 mm DBL END RING SPANNER | 1 | |
| 41030911 | 220.9.X.11-9 X 11 mm DBL END RING SPANNER | 1 | |
| 41031011 | 220.10.X.11-10x11 mm DBL END RING SPANNER | 1 | |
| 41031214 | 220.12.X.14-12x14 mm DBL END RING SPANNER | 1 | |
| 41031314 | 220.13.X.14-13x14 mm DBL END RING SPANNER | 1 | |
| 41031719 | 220.17.X.19-17x19 mm DBL END RING SPANNER | 1 | |
| 41031819 | 220.18.X.19-18x19 mm DBL END RING SPANNER | 1 | |
| 41031922 | 220.19.X.22-19x22 mm DBL END RING SPANNER | 1 | |
| 41032022 | 220.20.X.22-20x22 mm DBL END RING SPANNER | 1 | |
| 41035507 | 220.5,5.X.7-5,5x7 mm DBL END RING SPANNER | 1 | |
| 41040607 | 20.6.X.7-6 X 7 DE OFFSET RING SPANNER | 1 | |
| 41040809 | 20.8.X.9-8 X 9 DE OFFSET RING SPANNER | 1 | |
| 41040810 | 20.8.X.10-8 X 10 DE OFFSET RING SPANNER | 1 | |
| 41041011 | 20.10.X.11-10 X 11 DE OFFSET RING SPANNER | 1 | |
| 41041013 | 20.10.X.13-10 X 13 DE OFFSET RING SPANNER | 1 | |
| 41041213 | 20.12.X.13-12 X 13 DE OFFSET RING SPANNER | 1 | |
| 41041317 | 20.13.X.17-13 X 17 DE OFFSET RING SPANNER | 1 | |
| 41041415 | 20.14.X.15-14 X 15 DE OFFSET RING SPANNER | 1 | |
| 41041617 | 20.16.X.17-16 X 17 DE OFFSET RING SPANNER | 1 | |
| 41041719 | 20.17.X.19-17 X 19 DE OFFSET RING SPANNER | 1 | |
| 41041819 | 20.18.X.19-18 X 19 DE OFFSET RING SPANNER | 1 | |
| 41041821 | 20.18.X.21-18 X 21 DE OFFSET RING SPANNER | 1 | |
| 41041922 | 20.19.X.22-19 X 22 DE OFFSET RING SPANNER | 1 | |
| 41042022 | 20.20.X.22-20 X 22 DE OFFSET RING SPANNER | 1 | |
| 41042123 | 20.21.X.23-21 X 23 DE OFFSET RING SPANNER | 1 | |
| 41042124 | 20.21.X.24-21 X 24 DE OFFSET RING SPANNER | 1 | |
| 41042224 | 20.22.X.24-22 X 24 DE OFFSET RING SPANNER | 1 | |
| 41042426 | 20.24.X.26-24 X 26 DE OFFSET RING SPANNER | 1 | |
| 41042427 | 20.24.X.27-24 X 27 DE OFFSET RING SPANNER | 1 | |
| 41042528 | 20.25.X.28-25 X 28 DE OFFSET RING SPANNER | 1 | |
| 41042730 | 20.27.X.30-27 X 30 DE OFFSET RING SPANNER | 1 | |
| 41042732 | 20.27.X.32-27 X 32 DE OFFSET RING SPANNER | 1 | |
| 41043032 | 20.30.X.32-30 X 32 DE OFFSET RING SPANNER | 1 | |
| 41043034 | 20.30.X.34-30 X 34 DE OFFSET RING SPANNER | 1 | |
| 41043641 | 20.36.X.41-36 X 41 DE OFFSET RING SPANNER | 1 | |
| 41044650 | 20.46.X.50-46 X 50 DE OFFSET RING SPANNER | 1 | |
| 41050607 | 21.6.X.7-6 X 7 mm DBL END RING SPANNER | 1 | |
| 41050809 | 21.8.X.9-8 X 9 mm DBL END RING SPANNER | 1 | |
| 41050810 | 21.8.X.10-8 X 10 mm DBL END RING SPANNER | 1 | |
| 41051011 | 21.10.X.11-10x11 mm DBL END RING SPANNER | 1 | |
| 41051213 | 21.12.X.13-12x13 mm DBL END RING SPANNER | 1 | |
| 41051317 | 21.13.X.17-13x17 mm DBL END RING SPANNER | 1 | |
| 41051415 | 21.14.X.15-14x15 mm DBL END RING SPANNER | 1 | |
| 41051617 | 21.16.X.17-16x17 mm DBL END RING SPANNER | 1 | |
| 41051719 | 21.17.X.19-17x19 mm DBL END RING SPANNER | 1 | |
| 41051819 | 21.18.X.19-18x19 mm DBL END RING SPANNER | 1 | |
| 41051821 | 21.18.X.21-18x21 mm DBL END RING SPANNER | 1 | |
| 41051922 | 21.19.X.22-19x22 mm DBL END RING SPANNER | 1 | |
| 41052022 | 21.20.X.22-20x22 mm DBL END RING SPANNER | 1 | |
| 41052124 | 21.21.X.24-21x24 mm DBL END RING SPANNER | 1 | |
| 41052427 | 21.24.X.27-24x27 mm DBL END RING SPANNER | 1 | |
| 41052732 | 21.27.X.32-27x32 mm DBL END RING SPANNER | 1 | |
| 41053032 | 21.30.X.32-30x32 mm DBL END RING SPANNER | 1 | |
| 41053034 | 21.30.X.34-30x34 mm DBL END RING SPANNER | 1 | |
| 41070607 | 23.6.X.7-6 X 7mm DE RING 10degOFFSET | 1 | |
| 41070809 | 23.8.X.9-8 X 9mm DE RING 10degOFFSET | 1 | |
| 41071011 | 23.10.X.11-10x11mm DE RING 10degOFFSET | 1 | |
| 41071213 | 23.12.X.13-12x13mm DE RING 10degOFFSET | 1 | |
| 41071415 | 23.14.X.15-14x15mm DE RING 10degOFFSET | 1 | |
| 41071617 | 23.16.X.17-16x17mm DE RING 10degOFFSET | 1 | |
| 41071719 | 23.17.X.19-17x19mm DE RING 10degOFFSET | 1 | |
| 41071819 | 23.18.X.19-18x19mm DE RING 10degOFFSET | 1 | |
| 41072022 | 23.20.X.22-20x22mm DE RING 10degOFFSET | 1 | |
| 41072123 | 23.21.X.23-21x23mm DE RING 10degOFFSETR | 1 | |
| 41072427 | 23.24.X.27-24x27mm DE RING 10degOFFSET | 1 | |
| 41073032 | 23.30.X.32-30x32mm DE RING 10degOFFSET | 1 | |
| 41080810 | 24.8.X.10-8X10 DBL END OPEN RING SPANNER | 1 | |
| 41080911 | 24.9.X.11-9X11 DBL END OPEN RING SPANNER | 1 | |
| 41081011 | 24.10.X.11-10X11 DBL END OPENRING SPANNER | 1 | |
| 41081012 | 24.10.X.12-10X12 DBL END OPENRING SPANNER | 1 | |
| 41081113 | 24.11.X.13-11X13 DBL END OPENRING SPANNER | 1 | |
| 41081214 | 24.12.X.14-12X14 DBL END OPENRING SPANNER | 1 | |
| 41081417 | 24.14.X.17-14X17 DBL END OPENRING SPANNER | 1 | |
| 41081619 | 24.16.X.19-16X19 DBL END OPENRING SPANNER | 1 | |
| 41081719 | 24.17.X.19-17X19 DBL END OPENRING SPANNER | 1 | |
| 41081922 | 24.19.X.22-19X22 DBL END OPENRING SPANNER | 1 | |
| 41082224 | 24.22.X.24-22X24 DBL END OPENRING SPANNER | 1 | |
| 41082427 | 24.24.X.27-24X27 DBL END OPENRING SPANNER | 1 | |
| 41082736 | 24.27.X.36-27X36 DBL END OPENRING SPANNER | 1 | |
| 41083032 | 24.30.X.32-30X32 DBL END OPENRING SPANNER | 1 | |
| 41091012 | 27.10.X.12-10x12mm DBL END RING STARTER | 1 | |
| 41091113 | 27.11.X.13-11x13mm DBL END RING STARTER | 1 | |
| 41091416 | 27.14.X.16-14x16mm DBL END RING STARTER | 1 | |
| 41091417 | 27.14.X.17-14x17mm DBL END RING STARTER | 1 | |
| 41091517 | 27.15.X.17-15x17mm DBL END RING STARTER | 1 | |
| 41091618 | 27.16.X.18-16x18mm DBL END RING STARTER | 1 | |
| 41091922 | 27.19.X.22-19x22mm DBL END RING STARTER | 1 | |
| 4115-0089W01 | MLG LOCKING RING HANDLE | 1 | |
| 4115-0801W03 | LOCKING RING HANDLE, MLG | 1 | |
| 4115-0801W05 | MLG LOWER & UPPER BEARING HANDLING TOOL | 1 | |
| 41160709 | 220ASP.7/32.X.9/32-7x9 spline EXLONG DE RING SPNR | 1 | |
| 41160810 | 220ASP.1/4.X.5/16-8x10spline EXLONG DE RING SPNR | 1 | |
| 41161214 | 220ASP.3/8.X.7/16-12x14spline EXLONG DE RINGSPNR | 1 | |
| 41161618 | 220ASP.1/2.X.9/16-16x18spline EXLONG DE RINGSPNR | 1 | |
| 41161820 | 220ASP.9/16.X.5/8-18x20spline EXLONG DE RINGSPNR | 1 | |
| 41162224 | 220ASP.11/16.X.3/4-22x24spline EXLONG DE RINGSPNR | 1 | |
| 41162630 | 220ASP.13/16X15/16-26x30spline EXLONG DE RINGSPNR | 1 | |
| 41162832 | 220ASP.7/8.X.1-28x32spline EXLONG DE RINGSPNR | 1 | |
| 4116C4R17 | BALL LOCK PIN D.ACTING ¯1/4X1.7" RING HANDLE | 1 | |
| 412-240-013-101 | RING, WEAR SLEEVE INTERMEDIATE G/B (HP, EP) | 1 | |
| 4124-0026W01 | SOCKET, THREADED RING REMOVE, NLG | 1 | |
| 41250608 | 21.TX.E.6.X.E.8-E6xE8 EXT TORX DE RING SPNR | 1 | |
| 41251012 | 21.TX.E.10.X.E.12-E10xE12 EXT TORX DE RING SPNR | 1 | |
| 41251418 | 21.TX.E.14.X.E.18-E14xE18 EXT TORX DE RING SPNR | 1 | |
| 41252024 | 21.TX.E.20.X.E.24-E20xE24 EXT TORX DE RING SPNR | 1 | |
| 41431416 | 220A.7/32.X.1/4-7/32x1/4 LONG D/E RING SPNR | 1 | |
| 41431620 | 220A.1/4.X.5/16-1/4x5/16 EX LNG DE RING SPNR | 1 | |
| 41432428 | 220A.3/8.X.7/16-3/8x7/16 EX LNG DE RING SPNR | 1 | |
| 41433234 | 220A.1/2.X.9/16-1/2x9/16 EX LNG DE RING SPNR | 1 | |
| 41433640 | 220A.5/8.X.3/4-5/8x3/4 EX LNG DE RING SPNR | 1 | |
| 41433840 | 220A.11/16.X.3/4-11/16x3/4 EX LNG DE RING SPNR | 1 | |
| 41441620 | 20.A.1/4.X.5/16-1/4x5/16" DBL END RING SPANNER | 1 | |
| 41442428 | 20.A.3/8.X.7/16-3/8x7/16" DBL END RING SPANNER | 1 | |
| 41443234 | 20.A.1/2.X.9/16-1/2x9/16" DBL END RING SPANNER | 1 | |
| 41443436 | 20.A.9/16.X.5/8-9/16x5/8" DBL END RING SPANNER | 1 | |
| 41443538 | 20.A.19/32.X.11/16-19/32x11/16" DE RING SPANNER | 1 | |
| 41443640 | 20.A.5/8.X.3/4-5/8x3/4" DBL END RING SPANNER | 1 | |
| 41443842 | 20.A.11/16.X.13/16-11/16x13/16" DE RING SPANNER | 1 | |
| 41444044 | 20.A.3/4.X.7/8-3/4x7/8" DBL END RING SPANNER | 1 | |
| 41444142 | 20.A.25/32.X.13/16-25/32x13/16" DE RING SPANNER | 1 | |
| 41444446 | 20.A.7/8.X.15/16-7/8x15/16" DBL EN RING SPANNER | 1 | |
| 41444648 | 20.A.15/16.X.1-15/16x1" DBL END RING SPANNER | 1 | |
| 41445258 | 20.A.1.1/8X1.5/16-1.1/8x1.5/16" DE RING SPANNER | 1 | |
| 41481620 | 24.A.1/4.X.5/16-1/4x5/16 DEND OPENRING SPANNER | 1 | |
| 41482024 | 24.A.5/16.X.3/8-5/16x3/8 DEND OPENRING SPANNER | 1 | |
| 41482428 | 24.A.3/8.X.7/16-3/8x7/16 DEND OPENRING SPANNER | 1 | |
| 41483234 | 24.A.1/2.X.9/16-1/2x9/16 DEND OPENRING SPANNER | 1 | |
| 41483640 | 24.A.5/8.X.3/4-5/8x3/4 DEND OPENRING SPANNER | 1 | |
| 41484048 | 24.A.3/4.X.1-3/4x1" DEND OPENRING SPANNER | 1 | |
| 41570810 | 25ASP.8.X.10-SPLINE DR RATCHET RING SPANNER | 1 | |
| 41571214 | 25ASP.12.X.14-SPLINE DR RATCHET RING SPANNER | 1 | |
| 41572428 | 25ASP.24.X.28-SPLINE DR RATCHET RING SPANNER | 1 | |
| 41601620 | 180.A.1/4.X.5/16-1/4x5/16 SHORT DE RING SPANNER | 1 | |
| 41602428 | 180.A.3/8.X.7/16-3/8x7/16 SHORT DE RING SPANNER | 1 | |
| 41603234 | 180.A.1/2.X.9/16-1/2x9/16 SHORT DE RING SPANNER | 1 | |
| 41603436 | 180.A.9/16.X.5/8-9/16x5/8 SHORT DE RING SPANNER | 1 | |
| 41611620 | 230.A.1/4.X.5/16-1/4x5/16OFFSET DE RING SPANNER | 1 | |
| 41612022 | 230.A.5/16.X.11/32-5/16x11/32 OFFSET DE RING SPNR | 1 | |
| 41612024 | 230.A.5/16.X.3/8-5/16x3/8 OFFSET DE RING SPNR | 1 | |
| 41612428 | 230.A.3/8.X.7/16-3/8x7/16 OFFSET DE RING SPNR | 1 | |
| 41612832 | 230.A.7/16.X.1/2-7/16x1/2 OFFSET DE RING SPNR | 1 | |
| 41613234 | 230.A.1/2.X.9/16-1/2x9/16 OFFSET DE RING SPNR | 1 | |
| 41613436 | 230.A.9/16.X.5/8-9/16x5/8 OFFSET DE RING SPNR | 1 | |
| 41613640 | 230.A.5/8.X.3/4-5/8x3/4 OFFSET DE RING SPNR | 1 | |
| 41613840 | 230.A.11/16.X.3/4-11/16x3/4 OFFSET DE RING SPNR | 1 | |
| 41614244 | 230.A.13/16.X.7/8-13/16x7/8 OFFSET DE RING SPNR | 1 | |
| 41614648 | 230.A.15/16.X.1-15/16x1" OFFSET DE RING SPNR | 1 | |
| 41614850 | 230.A.1.X.1.1/16-1"x1.1/16" OFFSET DE RING SPNR | 1 | |
| 41615256 | 230.A.1.1/8X1.1/4-1.1/8x1.1/4" OFF DE RING SPNR | 1 | |
| 201440205 | EYE END # OUTER TUBE, COMPRESSION SPRING | 1 | |
| 325001000 | SOLDERING GUN | 1 | |
| 327020400 | SOLDERING IRON 50W | 1 | |
| 329500300 | SOLDERING IRON 30 W | 1 | |
| 329500400 | SOLDERING IRON 40W | 1 | |
| 369029985 | BUNGEE SPRING COMPRESSION TOOL ROD AND CHANNEL (PIN 369029985) | 1 | |
| 4164003-8 | ROTOR BEARING DISASSEMBLY FIXTURE (2 IT) | 1 | |
| 4164042-1 | SEAL CONDITIONING RING | 1 | |
| 4164043-1 | SEAL CONDITIONING RING | 1 | |
| 4164044-1 | SEAL CONDITIONING RING | 1 | |
| 4164049-1 | RETAINER CONDITIONING RING | 1 | |
| 4164050-1 | RETAINER CONDITIONING RING | 1 | |
| 4164051-1 | RETAINER CONDITIONING RING | 1 | |
| 4164052-1 | RETAINER CONDITIONING RING | 1 | |
| 4164054-1 | RETAINER CONDITIONING RING | 1 | |
| 4164056-1 | BEARING DRIVER | 1 | |
| 4164058-1 | BEARING DRIVER | 1 | |
| 4164059-1 | BEARING DRIVER | 1 | |
| 4164060-1 | BEARING DRIVER | 1 | |
| 4164066-1 | RETAINER CONDITIONING RING | 1 | |
| 4164066-2 | RETAINER CONDITIONING RING | 1 | |
| 4164066-3 | RETAINER CONDITIONING RING | 1 | |
| 4164066-4 | RETAINER CONDITIONING RING | 1 | |
| 4164066-5 | RETAINER CONDITIONING RING | 1 | |
| 4164066-6 | RETAINER CONDITIONING RING | 1 | |
| 4164066-7 | RETAINER CONDITIONING RING | 1 | |
| 4164068-1 | RETAINER CONDITIONING RING | 1 | |
| 4164071-1 | RETAINER CONDITIONING RING | 1 | |
| 4164074-1 | RETAINER CONDITIONING RING | 1 | |
| 4164076-1 | RETAINER CONDITIONING RING | 1 | |
| 4164078-1 | RETAINER CONDITIONING RING | 1 | |
| 42-27-04-019 | FIXTURE FOR CALIBRATING THE LEAF SPRINGS INDIVIDUALLY | 1 | |
| 42-27-04-022 | STUD FOR CALIBRATING THE LEAF SPRINGS INDIVIDUALLY | 1 | |
| 42020024 | 5.24-24mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020027 | 5.27-27mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020030 | 5.30-30mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020032 | 5.32-32mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020036 | 5.36-36mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020038 | 5.38-38mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020041 | 5.41-41mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020042 | 5.42-42mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020046 | 5.46-46mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020050 | 5.50-50mm HEAVY DUTY RING SPANNERS | 2 | |
| 42020055 | 5.55-55mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020060 | 5.60-60mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020065 | 5.65-65mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020070 | 5.70-70mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020075 | 5.75-75mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020080 | 5.80-80mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020085 | 5.85-85mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020090 | 5.90-90mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020095 | 5.95-95mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020100 | 5.100-100mm HEAVY DUTY RING SPANNERS | 1 | |
| 42020105 | 5.105-105mm HEAVY DUTY RING SPANNERS | 1 | |
| 423085M0NT6-1 | PRESS TOOL TO FIT THE SLEEVE BEARING IN THE HANDWHEEL | 1 | |
| 423085M0NT6-2 | PRESS TOOL TO FIT THE SLEEVE BEARING IN THE HANDWHEEL | 1 | |
| 42315-60-221 | SPRING (GOOD RICH / 44318-11-106) | 1 | |
| 424552M0NT1-1 | PRESS TOOL TO DISASSEMBLR THE BEARING | 1 | |
| 42520-502 | PULLER - BEARING INPUT AND STARTER. | 1 | |
| 4263PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) | 1 | |
| 4264PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) (Rivet size: 1/8") (Add to cart: Add To Cart) | 1 | |
| 4265PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) (Rivet size: 1/8") (Add to cart: Add To Cart) (Rivet size: 5/32") (Add to cart: Add To Cart) | 1 | |
| 427-240-107-101 | WRENCH OUTER RACE DUPLEX BEARING TR DRIVE | 1 | |
| 429 899 617 | TIE DOEN KIT AIRCRAFT MORING | 1 | |
| 43-GU-121 | NLG STRUT ORING GUIDE | 1 | |
| 43-GU-122 | MLG STRUT O RING GUIDE | 1 | |
| 440.A.9/16 | 1/4DR X 9/16"AF CROW RING | 1 | |
| 44190010 | 12161 VDE-10-VDE RING END SPANNER 10MM | 1 | |
| 44190013 | 12161 VDE-13-VDE RING END SPANNER 13MM | 1 | |
| 44190014 | 12161 VDE-14-VDE RING END SPANNER 14MM | 1 | |
| 44190017 | 12161 VDE-17-VDE RING END SPANNER 17MM | 1 | |
| 44190019 | 12161 VDE-19-VDE RING END SPANNER 19MM | 1 | |
| 44190022 | 12161 VDE-22-VDE RING END SPANNER 22MM | 1 | |
| 45-128 | Swivel Blade® Cable Slitter and Ringing tool | 2 | |
| 45-162 | Gray Adjustable Blade Ringer™ Stripper | 5 | |
| 45-163 | Blue Adjustable Blade Ringer™ Stripper | 6 | |
| 45-164 | Blue Adjustable Blade Ringer™ Stripper | 7 | |
| 45-165 | Black Adjustable Blade Ringer™ Stripper | 5 | |
| 45-2327 | Ringer™ Stripper (Window Stripping) | 2 | |
| 45-400 | Ringer Cable Stripper Small V No Blade | 4 | |
| 45-401 | Ringer Cable Stripper 5 Mil Insulated w Blade | 3 | |
| 45-402 | Ringer Cable Stripper 8-10 Mil Insulated with Blade | 2 | |
| 45-403 | Ringer Cable Stripper Standard No Blade | 5 | |
| 45-404 | Ringer Cable Stripper Deep "V" No Blade | 2 | |
| 450-6 | SPRING TYPE DIVIDERS | 2 | |
| 4510T3000-000 | TEST SET, COMPONENT AND WIRING CHECKOUT - CLS | 1 | |
| 45NX09 | DEBURRING TOOL | 1 | |
| 460003180-24 | RING- KEEP INFLATION ADAPTOR SEAL | 18 | |
| 460003180-74 | KEEP RING MLG GLAND SEALS | 15 | |
| 460004941-5 | Adaptor - hyd press test steering valve | 1 | |
| 46005832 | SPRING EXPENDER MLG SIDE STAY | 1 | |
| 46233003 | BALL-END HEX KEY WRENCH, HEX RETAINER RING=GROSS | 1 | |
| 46233004 | HEX KEY WITH BALL END AND RETAINING RING HEX | 1 | |
| 46233005 | HEX KEY WITH BALL END AND RETAINING RING HEX | 1 | |
| 46233006 | HEX KEY WITH BALL END AND RETAINING RING HEX | 1 | |
| 46233008 | HEX KEY WITH BALL END AND RETAINING RING HEX | 1 | |
| 46233010 | HEX KEY WITH BALL END AND RETAINING RING HEX | 1 | |
| 58621020 | RING END 9X12MM 58621020 | 1 | |
| 58621024 | RING END 9X12MM 58621024 | 1 | |
| 58621032 | RING END 9X12MM 58621032 | 1 | |
| 58621034 | RING END 9X12MM 58621034 | 1 | |
| 58621036 | RING END 9X12MM 58621036 | 1 | |
| 58621038 | RING END 9X12MM 58621038 | 1 | |
| 58621040 | RING END 9X12MM 58621040 | 1 | |
| 58628046 | 732A/80.15/16-INSERT RING DRIVE FOR TORQUE W | 1 | |
| 58628050 | 732A/80.1.1/16-INSERT RING DRIVE FOR TORQUE W | 1 | |
| 450187153 | REPAIR TO STEERING CYLINDER | 1 | |
| 450266266 | BEARING SUBASSEMBLY, MACHINED LOWER | 1 | |
| 460004586 | Torque Adapter − NLG Ring Nut | 1 | |
| 460004629 | GUIDE - BEARING AND SEAL HOUSING ASSEMBLY | 1 | |
| 460004632 | EXTRACTOR - BEARING AND SEAL HOUSING | 1 | |
| 460004695 | Compressor-side stay spring | 1 | |
| 460004834 | Adaptor - torque steering tests | 3 | |
| 460004837 | MEASURING DEVICE | 1 | |
| 460005796 | RING - GLANDSEAL SPLIT NLG | 1 | |
| 460005832 | SPRING EXPANDER-MLG SIDE STAY | 31 | |
| 460005832-51 | SPRING EXPANDER-MLG SIDE STAY | 2 | |
| 460005832-53 | SPRING EXPANDER-MLG | 3 | |
| 460005970 | TOOL - DOWNLOCK SPRINGBOX INST. (MV7632-5-15) | 1 | |
| 460006405 | SLEEVE ASSY. MLG BEARING SLIDING TUBE | 17 | |
| 460006458 | ADJUSTABLE SPRING GUIDE | 1 | |
| 460006588 | Torque adaptor trunnion bearing A320 | 6 | |
| 460006621 | MEASURING PADS | 1 | |
| 460006622 | MEASURING PADS | 1 | |
| 460006629 | MEASURING PADS | 1 | |
| 460006630 | MEASURING PADS | 1 | |
| 460006971 | DUMMY BEARING HOUSING | 1 | |
| 460007002 | EXPANDER - LOCK SPRINGS SUPSD BY 460007169/460007170 | 1 | |
| 460007170 | EXPANDER-SPRING | 6 | |
| 460007328 | EXPANDER - SPRING | 8 | |
| 4333093995 | HT-1650 TGR Professional Brake Line Flaring Tool- 45 and 37 degree Set | 1 | |
| 4600067170 | SPRING EPANDER | 1 | |
| 460007422-1 | A320 STEERING ADAPTOR L/H TOOL | 1 | |
| 460007422-2 | A320 STEERING ADAPTOR R/H TOOL | 1 | |
| 460007423-1 | A320 STEERING ADAPTOR L/H TOOL | 1 | |
| 460007423-2 | A320 STEERING ADAPTOR R/H TOOL | 1 | |
| 4610352503 | SPRING ADJUSTING TOOL | 1 | |
| 4610382503 | SPRING ADJUSTING TOOL | 1 | |
| 38808012371 | O-RING RUBBER 70¡ SHORE 2.62MM X 12.37 ID | 1 | |
| 4007841074616 | SOLDERING REFLECTOR NOZZLE | 1 | |
| 265341711619751 | ACGT SEAL RING, ROD | 1 | |
| 24E620 | PORTABLE PAINT BOOTH DESIGNED FOR SMALL TO MEDIUM PROJECTS, FEATURING A LIGHTWEIGHT AND EASY SETUP. | 1 | |
| 4651812300-48 | HAMMER RIVET GUN 3X MODEL : CP4444 RUSAB / 17-3 XSP / EQVT BPM : 2160 WITH RETAINER SPRINGS ( HANDI , BEEHIVE , MECH-AID ) | 1 | |
| 466-V-29-S | FILTER-RETURN-SKYDROL O RING -131 INSTALLED | 1 | |
| 468-179 | MICROMETER, INTERNAL, DIGITAL, 3 POINT, 250MM MEASURING RANGE, 0.005MM ACCURACY | 1 | |
| 4769-5260-0180 | INNER CYLINDER UPPER BEARING LANDING FOR MAIN GEAR (BODY) | 1 | |
| 4769-5261-0180 | INNER CYLINDER UPPER BEARING LANDING FOR MAIN GEAR (WING) | 1 | |
| 479100 0-10 | RING - TYPE LOAD CELL 844 - 10 KN | 1 | |
| 48-60-04-672 | FLAG AND ELECTRO-MAGNET RING EXTRACTOR | 1 | |
| 48LBF | SPRING BALANCE 20DAN (48LBF) TOOL | 1 | |
| 490700GSE2-1 | HSTA INSTALLATION AND REMOVAL TOOL, OUTER BEARING SLEEVE | 1 | |
| 490700GSE5-1 | HSTA INSTALLATION AND REMOVAL TOOL, NUT INNER BEARING SLEEVE | 1 | |
| 4916707-1 | MOORING ADAPTER WING | 2 | |
| 4916707-2 | MOORING ADAPTER WING | 1 | |
| 4916756-1 | LANDING GEAR METERING PIN PUL | 1 | |
| 4916756-501 | LANDING GEAR METERING PIN PULLER ASSY | 5 | |
| 4916779-1 | Adapter torque，steering cylinder jah nut | 4 | |
| 4920-01-168-1313 | SPRING SCALE CENTERING ADAPTER PLATE | 1 | |
| 492A | CUP, BEARING (INBOARD) | 3 | |
| 495-34299-954-615G | ACGT RING ROD TYPE | 1 | |
| 4A6X2221KIT-B | AAE TUBE BENDING/FLARING KIT | 1 | |
| 4AS3360276-503 | PASSENGER/CREW DOOR AIRSPRING | 1 | |
| 4BM51715 | HORIZONTAL FORK CENTERING STUD | 1 | |
| 4FL EM | Universal End Mills 240 ( Stering Carbide ) | 1 | |
| 4G6320A00231A023R | F/W BEARING AND SPACER INSTALLATION TOOL | 1 | |
| 4G6320A00231A029L | F/W BEARING AND SPACER REMOVAL TOOL | 1 | |
| 4GP | PLUG, MS GAGE PORT, WITHO-RING(D18302 VALVE/REGULATORS) | 1 | |
| 4MIT65B01501 | DIE - BEARING STAKE, ROD END ASSEMBLY, 65B01521 AND 65B01537 | 1 | |
| 4MIT65B82591 | TORQUE FIXTURE - PISTON, STEERING ACTUATOR, NOSE LANDING GEAR | 1 | |
| 4OHME65B00724-32 | STRAP W/ D-RING | 1 | |
| 4P55 | RING PROBE FOR SUPER HALEC DIA 7-95MM | 1 | |
| 4Z762 | SOLDERING STATION | 1 | |
| 5.0 OTJA | RING ADAPTER, LARGE | 1 | |
| 5.0-OTJA | RING ADAPTER, LARGE | 1 | |
| 5/8-18-TRG-3A-SET | THREAD RING GAGE GO/NOGO AS PER 5/8-18-UNJF-3A | 1 | |
| 5/8-18-UNJF-3A | THREAD RING GAUGE 5-8-18 | 2 | |
| 50-00800 | Apollo 50-00800 Measuring Frame range 0-50mm Gradution 0.01mm | 1 | |
| 50-00801 | Apollo 50-00801 Measuring Frame range 50-100mm Gradution 0.01mm | 1 | |
| 50-00802 | Apollo 50-00802 Measuring Frame range 100-150mm Gradution 0.01mm | 1 | |
| 50-00803 | Apollo 50-00803 Measuring Frame range 150-200mm Gradution 0.01mm | 1 | |
| 50-00804 | Apollo 50-00804 Measuring Frame range 200-250mm Gradution 0.01mm | 1 | |
| 50-00805 | Apollo 50-00805 Measuring Frame range 250-300mm Gradution 0.01mm | 1 | |
| 50-00806 | Apollo 50-00806 Measuring Frame range 300-350mm Gradution 0.01mm | 1 | |
| 50-00807 | Apollo 50-00807 Measuring Frame range 350-400mm Gradution 0.01mm | 1 | |
| 50-00808 | Apollo 50-00808 Measuring Frame range 450-500mm Gradution 0.01mm | 1 | |
| 50-00809 | Apollo 50-00809 Measuring Frame range 500-600mm Gradution 0.01mm | 1 | |
| 50-00810 | Apollo 50-00810 Measuring Frame range 600-700mm Gradution 0.01mm | 1 | |
| 50-00811 | Apollo 50-00811 Measuring Frame range 700-800mm Gradution 0.01mm | 1 | |
| 50-00812 | Apollo 50-00812 Measuring Frame range 400-450mm Gradution 0.01mm | 1 | |
| 500-0035-1 | TOOL REPRESENTING CLOGGED FILTERING ELEMENT | 1 | |
| 503R | Moore & Wright Retail Pack Spring Divider 3"/75mm | 1 | |
| 504R | Moore & Wright Retail Pack Spring Divider 4"/100mm | 1 | |
| 506122A | DETENT SPRING | 1 | |
| 506R | Moore & Wright Retail Pack Spring Divider 6"/150mm | 1 | |
| 5076TCA | ADAP., TORQ. WRENCH, NOSE WHEEL STEERING | 1 | |
| 507FB | FLARING TOOL 37 DEG AIR | 2 | |
| 5094PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) (Rivet size: 1/8") (Add to cart: Add To Cart) (Rivet size: 5/32") (Add to cart: Add To Cart) (Rivet size: #6) (Add to cart: Add To Cart) | 1 | |
| 5095PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) (Rivet size: 1/8") (Add to cart: Add To Cart) (Rivet size: 5/32") (Add to cart: Add To Cart) (Rivet size: #6) (Add to cart: Add To Cart) (Rivet size: #8) (Add to cart: Add To Cart) | 1 | |
| 5096PDSB | Spring Back Dimple Die Sets (Rivet size: 3/32") (Add to cart: Add To Cart) (Rivet size: 1/8") (Add to cart: Add To Cart) (Rivet size: 5/32") (Add to cart: Add To Cart) (Rivet size: #6) (Add to cart: Add To Cart) (Rivet size: #8) (Add to cart: Add To Cart) | 1 | |
| 5099A25 | PLIER-ACTIVATED SPRING CLAMP SETS | 1 | |
| 50A94272000 | THROTTLE RING ADJUSTMENT TOOL | 1 | |
| 510-010 | PIPEFITTER'S CHAIN VISE, OR OTHER HOLDING STAND- TO HOLD RESERVOIR DURING DISSASSEMBLY/ASSEMBLY (AND SAFETY) | 1 | |
| 512-610 | SOLDERING IRON | 1 | |
| 5120-00-772-7149 | Loading Madrel, Bearing | 1 | |
| 5120-01-482-9558 | PULLER DIFFUSER & #2 BEARING ASSY | 1 | |
| 5120-01-602-1126 | #3 BEARING ALIGNMENT GUIDE | 1 | |
| 513R | Moore & Wright Retail Pk Spring Inside Caliper 3"/75mm | 1 | |
| 514R | Moore & Wright Retail Pk Spring Inside Caliper 4"/100mm | 1 | |
| 516-944-11 | GAGE BLOCK SET;|GAUGE BLOCKS STEEL,MEASURING,GRADE 2; | 1 | |
| 516R | Moore & Wright Retail Pk Spring Inside Caliper 6"/150mm | 1 | |
| 5203J | BALL BEARINGNSK 2 ROW 17 ID X 40 OD X 17.5 TH | 1 | |
| 523R | Moore & Wright Retail Pk Spring Outside Caliper 3"/75mm | 1 | |
| 524R | Moore & Wright Retail Pk Spring Outside Caliper4"/100mm | 1 | |
| 52681A0200-01 | RING ADAPTOR | 1 | |
| 526R | Moore & Wright Retail Pk SpringOutside Caliper 6"/150mm | 1 | |
| 52A | Tennsmith® Squaring Shears (Capacity: 16 / 20 ga.) (Maximum cutting length: 37") (Gauge ranges (back/front): 30" / 37") (Strokes per minute: 40) (Shipping weight: 800 lbs (363 kgs)) (Add to cart: Add To Cart) (Capacity: 16 / 20 ga.) (Maximum cutting lengt | 1 | |
| 52H-1 PH | Tennsmith® Squaring Shears (Power: 1 Phase, 220V, 60Hz) (Maximum cut length: 52-1/4") (Gauge ranges: 30" Back37" Front) (Shipping weight: 1300 lbs (590 kgs)) (Add to cart: Add To Cart) | 1 | |
| 52H-3 PH | Tennsmith® Squaring Shears (Power: 1 Phase, 220V, 60Hz) (Maximum cut length: 52-1/4") (Gauge ranges: 30" Back37" Front) (Shipping weight: 1300 lbs (590 kgs)) (Add to cart: Add To Cart) (Power: 3 Phase, 220V*, 60Hz) (Maximum cut length: 52-1/4") (Gauge ran | 1 | |
| 52X-11-07 | DOOR TENSATOR SPRING TOOLING | 1 | |
| 52X-11-14 | DOOR TENSATOR SPRING TOOLING | 1 | |
| 53-100-1 | Adapto Hand Flaring Kit (Description: Flaring Tool Only) (Add to cart: Add To Cart) (Description: 11 PC Kit includes flaring &) (Add to cart: Add To Cart) | 2 | |
| 53-256-FK | USATCO 37° Single & Double Lap Flaring Tool Kit (Includes 1: Flaring Tool, Protrusion Gauge) (Add to cart: Add To Cart) (Includes 1: Flaring Tool, Inner-Outer Ream Tubing Cutter, Carr) (Add to cart: Add To Cart) | 2 | |
| 53-94000 | Speed Driver Hole Deburring (Description: Speed Driver) (Add to cart: Add To Cart) (Description: Speed Driver & 3/8" Dia. 100° Cutter) (Add to cart: Add To Cart) | 1 | |
| 53-RBH-2 | Rivet Gun Retainer Springs (Type: Mech-Aid) (Size/diameter: 1-3/32" Dia. (.401)) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-5/32" Dia.) (Add to cart: Add To Cart) (Type: Mech-Aid) (Size/diameter: 1-3/16" Dia. (.498)) (Add to cart: This | 1 | |
| 53042A0000-02 | WEAR MEASURING DEVICE | 1 | |
| 53420DC10-50 | DETENT PIN RING HANDLE ¿10mm X 50mm CRES | 1 | |
| 534546-220-4-51 | SLYDRING | 1 | |
| 537230353 | HPC Rotor Build Stand - Distance RingsLHT Dwg No.(537230353) | 1 | |
| 543-396B | Mitutoyo 543-396B ABSOLUTE Digimatic Indicator, Low Measuring Force Type ID-C, 12.7mm / .5" | 1 | |
| 545-008 | SOLDERING IRON | 1 | |
| 54765A12 | SCREW DRIVER; SQUARE DRIVE TORQUE MEASURING, 0 TO 384 | 1 | |
| 550T05647-401 | DEVICE ASSY-GAS SPRING RMVL/INSTL, DOOR | 1 | |
| 550T05664-401 | PIN, SET RINGGING, MAIN DOOR, CONJUNTO DE PINOS | 1 | |
| 55469S0000 | BORDERING FIXTURE | 1 | |
| 5555A55 | SOFT-JAW NONMARRING ADJUSTABLE PLIERS | 1 | |
| 55648S0000 | GUIDE RING | 1 | |
| 55651S0000 | MEASURING DEVICE | 1 | |
| 558-1-05972 | EXPANSION TOOL,BEARING ASSY(ADMT 5 ONLY) | 1 | |
| 558-1-05974 | BEARING MANDREL TOOL | 1 | |
| 56469S0000 | BORDERING FIXTURE | 1 | |
| 570-3983-02 | BEARING ALIGNMENT AND PRELOAD FIXTURE | 1 | |
| 57195K81 | BASIC SET (BEARING/ BUSHING AND SEAL DRIVER SETS) | 1 | |
| 574121-1 | STAND (TO HOLD MECHA- NISM DURING REMOVAL OF DIAL AND | 1 | |
| 574121-11 | STAND (TO HOLD ECCENTRIC SETTING DURING ASSEMBLY | 1 | |
| 57561-0002 | Tapered Ring | 1 | |
| 57811A0000-01 | END PLAY MEASURING FIXTURE | 1 | |
| 57827-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57833-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57838-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57844-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57848-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57850-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57860-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57863-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57884-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57888-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 57889-5000 | 1.00/1.27mm I/O Cable Wiring IDT Jig | 1 | |
| 58-369 | IN / OUT DEBURRING TOOL 3/16 | 1 | |
| 58202-0003 | GUIDE RING | 1 | |
| 5916729-1 | NOSE GEAR TORQUE TUBE END BEARING | 4 | |
| 5937-04016 | SPLIT RING EXPANDER | 2 | |
| 5956101-5501 | VALVE ASSY NOSE WHEEL STEERING BYPASS AND RELIEF | 2 | |
| 598MC05 | EPDC WIRING TEST BENCH | 1 | |
| 5A0898 | FRONT BLADE RETAINING RING | 1 | |
| 5ME65-73788 | Fittings To Support Rudder And Elevator During Weigh & Balance | 1 | |
| 5ME65B01900 | TE FLAP MAIN CARRIAGE NUT ON SPINDLE BEARING | 6 | |
| 5MIT65B01503 | TORQUE FIXTURE - STEERING ACTUATOR PISTON, NOSE LANDING GEAR | 2 | |
| 5ML2 | SYRINGE,HYPODERMIC | 1 | |
| 5MS08-01300 | ROD BEARING SEAL SIZING BAR | 1 | |
| 5RCJ7 | THREAD MEASURING WIRE SET | 1 | |
| 5T2-6374-9 | BEARING CUP DRIVER | 1 | |
| 5T2-6544-22 | BEARING CUP DRIVER | 1 | |
| 5T2-8080 | BEARING CUP DRIVER (ALL TOOLS-1 TO -57) | 1 | |
| 5T2-8080-13 | DRIVER-BEARING CUP | 1 | |
| 5T2-8080-23 | DRIVER-BEARING CUP | 1 | |
| 60-0197-00 | BEARING DICE ASSY TOOL | 1 | |
| 600-10388-2 | FAIRING INSTL-SIDE (RH) | 1 | |
| 600-10388-41S | FAIRING ASSY OUTBD LH | 1 | |
| 600-6359-001 | PRINTED WIRING BOARD | 1 | |
| 600-9359-001 | PRINTED WIRING BOARD | 1 | |
| 6000-1 | ***DISCONTINUED ITEM - LIMITED QUANTITY AVAILABLE*** #40 Spring-Loaded Prick-Punch Style Hole Finder | 1 | |
| 6001606-100 | RING BEAD BREAKER 8" | 1 | |
| 6001607-100 | RING BEAD BREAKER 9" | 1 | |
| 601R86100-1 | STEERING CONTROL MODULE | 1 | |
| 602KIT1225 | LOCK ROD AND SPRING FR EPIQ RC | 1 | |
| 6030-3001 | LED PORTABLE STRING LIGHT | 1 | |
| 6053K11 | DELUXE SET (BEARING/ BUSHING AND SEAL DRIVER SETS) | 1 | |
| 61-860 | Pocket Automatic Center Punch (Description: Tool with Centering Point) (Add to cart: Add To Cart) | 1 | |
| 610007AB | MEASURING DEVICE | 8 | |
| 610A270-C | BELT FORWARD MOORING EQUIPMENT DKS.21XL.C.00 | 1 | |
| 617-4101-001 | EXTENDER BOARD, PRINTED WIRING | 1 | |
| 617-4431-001 | BEARING PREOLAD FIXTURE | 1 | |
| 618TI016 | DESOLDERING PUMP | 1 | |
| 620-G-028945 | HAND TOOL BOX 4 DRAWERS KENNEDY MANUFACTURING CO. | 1 | |
| 620-G-028945 | HAND TOOL BOX 4 DRAWERS KENNEDY MANUFACTURING CO | 1 | |
| 62001FE174-001 | ANTI-EXTRUSION RING AND SEAL INSTALLATION TOOL | 1 | |
| 62100-3700 | Soldering Fixture | 1 | |
| 6260A0600-01 | GUIDE - STEERING ACTUATOR PIN | 1 | |
| 6260A4000-01 | SPRING EXPANDER - NLG | 1 | |
| 6262A1000-01 | ARJ MAIN LANDING GEAR SPRING MOUNTING TOOL | 1 | |
| 6263-6301 | NLG THREADED RING SOCKET | 1 | |
| 6263A2600-01 | LOCKING RING REMOVAL TOOL,M.LANDING GEAR | 1 | |
| 6263A3000-01 | DOWNLOCK SPRING EXTENDER | 1 | |
| 627A190-A | GROUND SPOILER LOCKING RING | 1 | |
| 63040005-1 | TOOL, CARTRIDGE-SPRING INSTALLATION MLG | 2 | |
| 63041006-1 | SPRING INSTALL TOOL DRAG BRACE | 4 | |
| 632-41162 | RIDGID 37DEG FLARING | 1 | |
| 6350-7112 (E-6350-15426) | SPECIAL SCREW FOR SECURING VIBRATION DETECT | 1 | |
| 6350-7112 (E6350-15426) | SPECIAL SCREW FOR SECURING VIBRATION DETECT | 1 | |
| 638-1103-001 | PRINTED WIRING BOARD | 1 | |
| 63823-3500 | Hand Crimp Tool for 4.5 Diameter Ring Terminals | 1 | |
| 63827-1100 | Hand Crimp Tool for Ring Tongue Terminal | 2 | |
| 64001-7670 | Crimp Tool Kit for 8 AWG Insulated Ring Terminals | 1 | |
| 64001-7770 | Crimp Tool Kit for 6 AWG Insulated Ring Terminals | 1 | |
| 64001-7870 | Hand Crimp Tool for 4 AWG Insulated Ring Terminals | 1 | |
| 64001-7970 | Hand Crimp Tool for 2 AWG Insulated Ring Terminals | 1 | |
| 64016-0040 | ServiceGrade™ Wire Strip Tool – Non-Ratcheting Spring Loaded | 1 | |
| 6429916-1 | O-RING GUIDE | 1 | |
| 6429916-1 | O-Ring Guide | 1 | |
| 65-44761-F13 | Autopilot Engage Spring Guide Wrench | 1 | |
| 6530CC | DIGITAL MONITORING TRACEABLE BAROMETER | 1 | |
| 655A100-A | TOOLVERTICAL TAIL TIP FAIRING SPREADER | 1 | |
| 65700-40005-041 | BEARING INSTALLATION AND REMOVAL KIT | 1 | |
| 65700-40030-041 | INSERTER, BEARING AND BUSHING | 1 | |
| 65885T2 | Bearing Installation Holding Fixture | 1 | |
| 65885T3 | Bearing Removal Holding Fixture | 1 | |
| 65C38809-2 | TOP KIT GROUNDING BRACKET, BOOST PUMP WIRING | 1 | |
| 66-052 | 6-PIECE TORX SCREWDRIVER SET FOR SPECIALIZED APPLICATIONS REQUIRING TORX FASTENERS. | 1 | |
| 66-225 | DISK SPRING PRESET TOOL | 1 | |
| 66-48 | STOP AND DISC SPRING REGISTER ADJUSTMENT TOOL | 1 | |
| 660-27 | SOLDERING IRON TOOL | 1 | |
| 66051098 | REAR FAIRING HANDLING CRADLE | 1 | |
| 6635T4 | TOOL: SPRING DIAL COMPRESS | 1 | |
| 670BA27059K1 | KIT, RUDDER TRAVEL LIMITER RETURN SPRING | 2 | |
| 675W0003-22 | BRACKET - RING CHORD | 1 | |
| 6795590-3 | FINGER TIP, BEARING PULLER; GAS PRODUCER TURBINE, POWER TURBINE | 1 | |
| 6796125-5 | BASE - SIDE GEAR BEARING | 2 | |
| 6796125-6 | SIDE GEAR BEARING BASE | 2 | |
| 68-3 | PUSH ROD SPRING COMPRESSOR | 12 | |
| 68.1-01-NSA 8132-05 | BAS AND NSA BEARINGS INSERTION AND SWAGING (ITEM) | 1 | |
| 68.1-01-NSA8132-05 | BAS AND NSA BEARINGS INSERTION AND SWAGING (ITEM) | 1 | |
| 6872544-2 | CLAMPING RING 1 SET (INCLUDED WITH 6872544) | 1 | |
| 68788T200 | BEARING DRIVER PLUG | 1 | |
| 68920-518-1 | TOOL FOR TURNING THREADED INDICATOR RETAINING RING | 1 | |
| 68942-331-1 | STAND (TO SUPPORT MECHANISM DURING ASSEM- BLY AND DISA | 1 | |
| 68942-518-1 | STAND (TO SUPPORT MECHANISM DURING ASSEM- BLY AND DISA | 1 | |
| 6895995-4 | BEARING - DUMMY | 1 | |
| 68D050072-1003 | INSTALLATION KIT , STAKED BEARING | 1 | |
| 69-72060 | 737 WINDOW SHORING | 1 | |
| 69008-0233 | Main Spring for 0690080225 Changehead | 1 | |
| 69501-1 | D-RING HNDLE | 1 | |
| 697505646 | RING NUT ADJUSTING WRENCH | 1 | |
| 697505663 | SPRING DISC FIXTURE | 1 | |
| 69Q | "Quick Change" Spring for Taylor, BATCO, Desoutter, and CP Style Rivet Guns | 1 | |
| 6F | Spring Flex Magnetic Retriever (Overall length: 17-1/2" (44.5 cm)) (Add to cart: Add To Cart) | 1 | |
| 6F6220G01131 | PULLER, M/R AND T/R UPPER CONICAL RING REMOVAL. | 1 | |
| 6F6220G01531 | PULLER, M/R AND T/R UPPER CONICAL RING | 1 | |
| 6F6220G02831 | TOOL, SLIDING RING CENTERING | 1 | |
| 6F6430G04031 | TAIL SPIDER SLIDER DUPLEX BEARING REPLACEMENT TOOL | 1 | |
| 6F6430G04032 | T/R DUPLEX BEARING REM-INST TOOL | 1 | |
| 6F6430G04431 | TAIL ROTOR DUPLEX BEARING REMOVE/INSTALL | 1 | |
| 6F6510G04431 | TAIL ROTOR SUPPORT BEARING (NEW TDS) ASSEMBLY/DISASSEMBLY TOOL KIT | 1 | |
| 6GP | PLUG, FUSIBLE PLUG PORT, WITHO-RING(D18302 VALVE/REGULATORS | 1 | |
| 6MIT65B01231-1 | TORQUE ADAPTER - BEARING RETAINER NUT, BODY LANDING GEAR | 4 | |
| 6MIT65B01503 | ADAPTER - TORQUE WRENCH, ROD END, NOSE LANDING GEAR STEERING ACTUATOR | 3 | |
| 6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
| 6SF3723 | 737 AUTO PILOT STEERING ADJ. CABLE | 1 | |
| 6SF3723-22-151 | AUTOPILOT STEERING ADJ. CABLE | 1 | |
| 6SV-43378 | Bearing Driver | 1 | |
| 6SV-86991 | Bearing Driver | 1 | |
| 6SV-87106 | Bearing Driver | 1 | |
| 7-562100037-601 | ROD END CENTERING FORK | 1 | |
| 70-9020-00 | PRELOAD SPRING TORQUE ADAPTER | 1 | |
| 70-9023-00 | COIL SPRING TORQUE ADAPTER | 1 | |
| 700-2-5 | Ladder, Rolling Platform, 2.5 Ft, Spring Loaded Casters | 1 | |
| 700-3 | Ladder, Rolling Platform, 3 Ft, Spring Loaded Casters | 1 | |
| 700-4 | Ladder, Rolling Platform, 4 Ft, Spring Loaded Casters | 1 | |
| 700-5 | Ladder, Rolling Platform, 5 Ft, Spring Loaded Casters | 4 | |
| 700-6 | Ladder, Rolling Platform, 6 Ft, Spring Loaded Casters | 5 | |
| 700-8 | Ladder, Rolling Platform, 8 Ft, Spring Loaded Casters | 5 | |
| 700140T | HOLDER-SPRING | 1 | |
| 701-2978000 | A320 USED FOR THE FWD/AFT PASSENGER CREW DOORS LH & RH TO SECURE THE PASSENGER DOOR DAMPER AND EMERGENCY OPERATION CYLINDER DURING ANY MAINTENANCE OPERATION | 32 | |
| 70102-08200-047 | BEARING ASSY,SPINDL | 1 | |
| 702P08A | RING PROBE, ID 8 MM (0.315 IN), SHIELDED FREQ. 250 HZ ‐ 40KHZ | 1 | |
| 702P10B/TF | RING (DONUT) PROBE, ABSOLUTE - REFLECTION, 250 HZ TO 40 KHZ FREQUENCY, ID .394 IN. (10.0 MM), OD .866 IN. (22.0 MM), HEIGHT .984 IN. (25.0 MM) (HOCKING NDT LIMITED OR EQUIVALENT) | 1 | |
| 703A91-0000-00 | COD, SECURING L200MM | 1 | |
| 703A91000002 | CORD,SECURING L300MM | 1 | |
| 703A91022301 | STANDARD HOISTING RING | 1 | |
| 703A91‐0000‐02 | CORD,SECURING L300MM | 1 | |
| 703A91‐0000‐03 | CORD,SECURING L300MM | 1 | |
| 703A94-0000-00 | CLEARANCE MEASURING DEVICE | 1 | |
| 703A94-3000-00 | TAIL ROTOR HEAD BEARING CLEARANCE MEASURING TOOL | 1 | |
| 703A94-750-2800 | HYD RING | 1 | |
| 703A955100-00 | FIRING PIN REPLACEMENT AIR-CONDITION | 1 | |
| 703A95510000 | FIRING PIN REPLACEMENT AIR-CONDITIONING | 1 | |
| 703А94-0015-04 | TOOL FOR CENTERING THE TAIL ROTOR DRIVE SHAFT | 1 | |
| 704-2554-002 | WIRING HAND HELD | 10 | |
| 70400-01407-106 | Ring, Drag Strut | 1 | |
| 70418A010101 | BLEED MONITORING COMPUTER | 2 | |
| 70700-77306-041 | DAMPER ROD END BEARING REMOVE / INSTALL TOOL | 1 | |
| 70700-77306-043 | MAIN ROTOR DAMPER BEARING INSTALLER/REMOVER | 1 | |
| 70700-77312-042 | TAIL DRIVE SHAFT BEARING INSTALLER | 1 | |
| 70700-77316-041 | TAIL ROTOR SPRING CAPSULE HOLDING CLAMP | 1 | |
| 70700-77533-043 | MAIN LANDING GEAR BEARING INSTALLER/REMOVER | 1 | |
| 71080013 | 11051N-3-THREE ARMED BEARING PULLER | 1 | |
| 7000143081 | DOWEL,CENTERING | 1 | |
| 7113K98 | RING TERMINALS INSULATED 22-18 AWG STUD SIZE #10 | 1 | |
| 7134770-10 | CRADLE C-130 SHORING FS737 | 1 | |
| 7134771-10 | CRADLE C-130 SHORING FS737 | 1 | |
| 714-042 | REDUCER, 1" X 1/2 SAE W/O-RING | 3 | |
| 71404-1 | VALVE ASSY - BRAKE METERING DUAL | 4 | |
| 71404-2 | B777 DUAL BRAKE METERING VALVE | 3 | |
| 717-001 | PLUG, 1/4 OD W/ O-RING | 2 | |
| 717RS10-C | 717-200 REFERENCE STANDARD FOR THE LOWER CENTER WING SKIN PANELS AT STRINGER 16 &18. PAGES 1-11. MATERIAL: 2024-T3, 7075-T6 &7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 71T20041-401 | PANTOGRAPHIC DOLLY, INSTL / RMV - WING-TO-FUSELAGE FAIRING | 1 | |
| 72-0254 | WRENCH - NIPPLE LINE, NO. 5 BEARING 0 (72-0254 AND PRE CFMI SB 72-0676)) | 1 | |
| 7229A42 | BIT ADAPTER FOR RATCHET WRENCHES WITH RING, 1/4" SQUARE DRIVE SIZE, FOR 1/4" BIT HEX SHANK | 1 | |
| 7229A44 | BIT ADAPTER FOR RATCHET WRENCHES WITH RING, 3/8" SQUARE DRIVE SIZE, FOR 1/4" BIT HEX SHANK | 1 | |
| 728A15 | TORSION SPRING MODEL G -30 CHERRY RIVET | 1 | |
| 728A6 | SPRING MODEL G 30 CHERRY RIVET | 1 | |
| 72AX118 | SPRING BRKT RED | 1 | |
| 732A/10 1/2 | RING END 9X12MM 58621032 | 1 | |
| 732A/10 11/16 | RING END 9X12MM 58621038 | 1 | |
| 732A/10 3/4 | RING END 9X12MM 58621040 | 1 | |
| 732A/10 3/8 | RING END 9X12MM 58621024 | 1 | |
| 732A/10 5/16 | RING END 9X12MM 58621020 | 1 | |
| 732A/10 5/8 | RING END 9X12MM 58621036 | 1 | |
| 732A/10 9/16 | RING END 9X12MM 58621034 | 1 | |
| 7340FT160P4 | RING, AGT DYNAMIC | 1 | |
| 737SSYFAS | SHORING STANDS YELLOW | 1 | |
| 738L579G04 | RING-LOCKED SELF-LOCKING INSERT | 1 | |
| 738L579G07 | RING-LOCKED SELF-LOCKING INSERT | 1 | |
| 738L579G08 | RING-LOCKED SELF-LOCKING INSERT | 1 | |
| 738L579G10 | KIT, INSERT AND LOCKRING | 1 | |
| 73B-8 | YANKEE SPRING-TYPE CALIPERS, INSIDE, 8" SIZE AND CAPACITY, QUICK-SPRING NUT, FLAT LEG | 1 | |
| 745-1110-2 | FAIRING RH(GOODRICH PROVIDES 745-1110-4 | 1 | |
| 747 MLG-1200 | SEAL GUIDE RING | 1 | |
| 750071403 | STANDARD "O" RING | 1 | |
| 751587-007 | STRAP - UTILITY (INCLUDED IN J32014, LOWER BEARING SEAL REPLACEMENT EQUIPMENT) | 1 | |
| 754-4-30739 | DUMMY BALL BEARING | 1 | |
| 75416-T003 | Adapter Torque Wrench (Tip) Feed Back Spring | 1 | |
| 762-155 | NOSE GEAR DOWNSPRING DISASSEMBLY/REASSEMBLY TOOL | 1 | |
| 762-157 | NOSE GEAR DOWNSPRING REMOVE/INSTALL TOOL | 1 | |
| 76700-20014-047 | BEARING AND BUSHING REMV TOOL | 1 | |
| 76700‐20044‐101 | BEARING INSTALL TOOL (MAIN ROTOR SPINDLE BRG REPLACEMENT) | 1 | |
| 772536-7 | BEARING, ROLLER, NEEDLE | 1 | |
| 77421002 | SOLDERING GUN | 1 | |
| 77470002 | *OBSOLETE see 77470003* 13120 - FOLDING MEASURING ROD | 1 | |
| 776-407-1 | TOOL FOR NEEDLE BEARINGS | 1 | |
| 776-407-2 | TOOL FOR NEEDLE BEARINGS | 1 | |
| 776-407-3 | TOOL FOR NEEDLE BEARINGS | 1 | |
| 777GEN011 | BRAKE PRESSURE MEASURING ADAPTER | 1 | |
| 7802A | NOSE LANDING GEAR STEERING TESTER | 1 | |
| 78169T2 | ADAPTOR TORQUE BODY STEERING MODULE | 1 | |
| 785840-4 | BLEED MONITORING COMPUTER | 1 | |
| 7897-3A | FIRING HEAD TEST | 1 | |
| 79000163-1 | #3 BEARING ALIGNMENT GUIDE | 1 | |
| 79001209-1 | VBV DOOR FORCE MEASURING TOOL | 1 | |
| 79001401-1 | PISTON OD PACKING SIZING TOOL (USED TO PROTECT PISTON ID PACKINGS DURING INSTALLATION OF ADJUSTER PIN (WILL PERFORM SAME FUNCTION AS PN 2558900-2)) | 1 | |
| 790098-14 | RING GUIDE | 1 | |
| 79140060 | SPARE SOLDERING BIT | 1 | |
| 7921TC15781-101 | MCD CAVITY O-RING REMOVAL TOOL | 1 | |
| 7947479-10 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 3 | |
| 7947479-10 I | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/17-4PH | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/304SS | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 79B-8 | YANKEE SPRING-TYPE CALIPER, OUTSIDE, 8" SIZE AND CAPACITY, QUICK-SPRING NUT, FLAT LEG | 1 | |
| 7C2233 | PIN EXPANDING - FAN COWL SUPPORT RING | 1 | |
| 7ME65-73761-1 | Mechanical Equipment -Forward Trunnion Bearing. Main Landing Gear Spanner Wrench | 17 | |
| 7MIT65B01500 | DIE - BEARING STAKE, ROD END ASSEMBLY 65B01513-1 AND -6 | 1 | |
| 7MIT65B01502 | DIE - BEARING STAKE, ROD END ASSY | 1 | |
| 80-3-10 | DE SOLDERING BRAID, SOLDER-WICK, ROSIN, #3 GREEN, STATIC DISSIPATIVE BOBBIN, 2MM X 10FT | 1 | |
| 80000-05 | DATA LOADER -ARING 615 | 2 | |
| 800018-0.8 | KLP, RING HANDLE, 1 | 1 | |
| 8000701-1 | BORING TOOL AND TOOLKIT | 1 | |
| 800218-0.8-4B | RING HANDLE STEEL GR | 1 | |
| 800218-0.8-4B. | RING HANDLE STEEL GR | 1 | |
| 8011523-508 | SPECIAL WRENCH FOR THE THREADED RING REMOVAL | 1 | |
| 803346-S52-1 | O - RING DIAL NEEDLE | 1 | |
| 804212-S52-1 | TRIM ARBAR USED TO PRPARE BACK-UP-RING FOR INSTALLATION ON SEAT | 1 | |
| 804212-S52-2 | PACKING RING STYLUS USED TO INSTALL PERFORMED PACKING ON SEAT | 1 | |
| 804212-S52-3 | O=RING INSTALLATION SLEEVE USED TO INSTALL ASSESMBLED SEAT COMPONENTS IN VALVE BODY | 1 | |
| 8093C | BLIND NEEDLE BEARING PULLER | 1 | |
| 80C2726507R3-1A | SUPPORT RING (Gearbox Pad Number 1,3,7,8 ) | 1 | |
| 80C2726507R3-1B | SUPPORT RING (Gearbox Pad Number 4,6 ) | 1 | |
| 80RS24 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 2024-t351, -7 DETAIL ALUMINUM 7075-T6511, -9 DETAIL ALUMINUM 7075-T73 and -11 DETAIL ALUMINUM 7075-T73. Includes Test Report and Certificate of Conformanc | 1 | |
| 80RS25 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 7075-T6511, -7 DETAIL ALUMINUM 7075-T73. FASTENERS: S4932869-6-6 (8 EA. ), S4932869-8-6 (12 EA. ), S4932869-8-7 (16 EA. ). COLLARS: NAS 1080-06 (8 EA... | 1 | |
| 80T2341 | WRENCH, TR DOOR BEARING | 1 | |
| 8100UC | SOLDERING GUN | 1 | |
| 8111A | CONNECTING ROD BORING & ALIGNMENT FIXTURE | 1 | |
| 812IR035 | SOLDERING IRON 115VAC,33W,800 DEG.F | 1 | |
| 81532GT | PROXY (INCLUDES WIRING AND THE SENSOR) | 1 | |
| 82-365-8 | SPI FINE DEBURRING SET COMPLETE 7 PC KIT | 1 | |
| 828490-101 | WRENCH, STEERING CYLINDER NUT | 1 | |
| 83000143 | ADAPTER RING | 1 | |
| 830006-806-00671 | BEARING REMOVER (369D25419)(369D25420) | 1 | |
| 830006-806-00674 | BEARING SEPARATOR 369D25418 T BEARING | 1 | |
| 830006-806-00675 | BEARING REMOVER (369D25419)(369D25420) | 1 | |
| 830006-809-00653 | SPRING EXPANDER-SPRING TAIL ROTOR PEDAL BUNGEE | 1 | |
| 831194-1 | BEARING INSTALLER AND REMOVER | 1 | |
| 831702-16 | ENGINE CONDITION TREND MONITORING KIT | 1 | |
| 831702-22 | KIT, ENGINE CONDITION TREND MONITORING | 2 | |
| 833052-1 | STARTER CLUTCH BEARING INSTALLATION DRIVER | 1 | |
| 833052-2 | STARTER CLUTCH BEARING INSTALLATION DRIVER | 1 | |
| 833091-1 | DUMMY TURBINE BEARING | 1 | |
| 833096-1 | TOOL - BEARING AND ROTTOR SEAL INSTL | 1 | |
| 833096-2 | BEARING AND ROTOR SEAL INSTALLER | 1 | |
| 833122-2 | BEARING AND SPACER INSTALLER SET | 1 | |
| 833129-1 | BEARING AND GEAR REMOVAL FIXTURE | 1 | |
| 833134-1 | BEARING REMOVAL ADAPTER | 1 | |
| 833283-1 | Bearing Preload check fixture | 1 | |
| 833283-1PM | BEARING PRELOAD CHECK FIXTURE | 1 | |
| 833296-1 | Diaphragm Curing Fixture | 1 | |
| 833465-1 | SET ADAPTERS BEARING PRESS | 1 | |
| 833496-10 | Seal Conditioning Ring | 1 | |
| 833496-7 | Seal Conditioning Ring | 1 | |
| 833496-8 | Seal Conditioning Ring | 1 | |
| 833496-9 | Seal Conditioning Ring | 1 | |
| 833497-2 | Seal Conditioning Ring | 1 | |
| 833498-2 | Seal Conditioning Ring | 1 | |
| 833500-2 | Seal Conditioning Ring | 1 | |
| 833500-3 | Seal Conditioning Ring | 1 | |
| 833503-1 | DRIVER BEARING | 1 | |
| 833504-1 | BEARING DRIVER | 1 | |
| 833505-1 | DRIVER BEARING | 1 | |
| 833506-1 | DRIVER BEARING | 1 | |
| 833507-1 | DRIVER BEARING | 1 | |
| 833511-6 | Seal Conditioning Ring | 1 | |
| 833511-8 | Seal Conditioning Ring | 1 | |
| 833511-9 | Seal Conditioning Ring | 1 | |
| 833512-1 | Seal Conditioning Ring | 1 | |
| 833512-2 | Seal Conditioning Ring | 1 | |
| 833512-3 | Seal Conditioning Ring | 1 | |
| 833512-4 | Seal Conditioning Ring | 1 | |
| 833513-10 | Seal Conditioning Ring | 1 | |
| 833513-11 | Seal Conditioning Ring | 1 | |
| 833513-12 | Seal Conditioning Ring | 1 | |
| 833513-7 | Seal Conditioning Ring | 1 | |
| 833513-8 | Seal Conditioning Ring | 1 | |
| 833513-9 | Seal Conditioning Ring | 1 | |
| 833514-5 | Seal Conditioning Ring | 1 | |
| 833514-6 | Seal Conditioning Ring | 1 | |
| 833514-7 | Seal Conditioning Ring | 1 | |
| 833514-8 | Seal Conditioning Ring | 1 | |
| 833516-5 | Seal Conditioning Ring | 1 | |
| 833516-6 | Seal Conditioning Ring | 1 | |
| 833516-7 | Seal Conditioning Ring | 1 | |
| 833517-4 | Seal Conditioning Ring | 1 | |
| 833517-5 | Seal Conditioning Ring | 1 | |
| 833565-2 | PORTABLE ENGINE STAND (TO SUPPORT ENGINE IN VARIOUS POSITIONS DURING ASSEMBLY) | 1 | |
| 833857-1 | BEARING HOLDER | 1 | |
| 833916-1 | FIXTURE REMOVAL BEARING AND SPACER | 1 | |
| 833933-1 | SET DUMMY BEARING | 1 | |
| 833943-1 | ENGINE TEST AND TRANSPORT CART ASSEMBLY - SUPPORTS APU DURING ENGINE TEST AND TRANSPORT | 1 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 833978-3 | Bearing Removal Adapter | 1 | |
| 833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-9 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860167-1 SPLINED SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPLINED SHAFT FROM 892575-1 BEARING) | 1 | |
| 834032-1 | INSTALLATION BEARING DRIVER AND SUPPORT ASSY | 1 | |
| 834033-1 | BEARING REMOVAL SPLIT PLATE ADAPTER ASSY | 1 | |
| 834036-1 | BALL BEARING MOUNT INSTALLATION AND DRIVER | 1 | |
| 834050-1 | ADAPTER CENTERING ROTATING GROUP | 1 | |
| 834271-1 | Bearing Removal Adapter | 1 | |
| 834271-6 | BEARING REMOVAL ADAPTER | 1 | |
| 834341-1 | Bearing Indicator Fixture | 1 | |
| 834341-1PM | BEARING INDICATOR FIXTURE | 1 | |
| 834379-4 | BEARING DRIVER | 1 | |
| 834438-11 | BEARING DRIVER | 1 | |
| 834438-6 | Bearing Holder (2 IT) | 1 | |
| 834443-1 | FAN PULLER (SUPPORTS 3826127-1 SEAL CARRIER DURING REMOVAL OF 3611175-1 SEAL ASSEMBLY SUPERSEDES 294880-1) | 1 | |
| 834447-1 | SEAL REMOVAL FIXTURE (SUPPORTS 3810187-2 BEARING INLET HOUSING ASSEMBLY DURING REMOVAL OF 3611175-1 | 1 | |
| 834541-1 | THRUST BEARING END PLAY MEASURING FIXTURE | 2 | |
| 834552-1 | BEARING GUIDE | 1 | |
| 834628-1 | Spring Scale Centering Adapter Plate | 1 | |
| 834628-1PM | SPRING SCALE CENTERING ADAPTER PLATE | 1 | |
| 834700-1 | DRIVEN BEARING | 1 | |
| 834701-1 | DRIVEN BEARING | 1 | |
| 834702-1 | DRIVEN BEARING | 1 | |
| 834703-1 | DRIVEN BEARING | 1 | |
| 834706-1 | BEARING DRIVER | 1 | |
| 834707-1 | BEARING DRIVER | 1 | |
| 834718-1 | ADAPTER REMOVAL BEARING | 1 | |
| 834731-1 | CENTERING FIXTURE , 1ST & 2ND STAGE IMP | 1 | |
| 834814-1 | DUPLEX BEARING NUT SIMULATOR | 1 | |
| 834815-1 | LOAD COMPRESSOR CENTERING TOOL | 2 | |
| 834819-1 | BEARING DRIVER | 1 | |
| 834826-1 | Bearing Removal Adapter | 1 | |
| 834826-1PM | BEARING REMOVAL ADAPTER | 1 | |
| 834830-1 | BEARING INSTALLATION DRIVER | 1 | |
| 834830-1PM | BEARING INSTALLATION DRIVER | 1 | |
| 834830-2 | BEARING DRIVER | 1 | |
| 834831-2 | BEARING INSTALLATION DRIVER | 1 | |
| 834831-3 | BEARING INSTALLATION DRIVER | 1 | |
| 834833-1 | BEARING REMOVAL ADAPTER | 1 | |
| 834891-1 | CENTERING BRIDGE ADAPTER | 1 | |
| 835157-1 | Adapter Bearing | 1 | |
| 836-667 | Soldering Iron Mini 2000 WM20L | 1 | |
| 839B1-4 | FLARING SNAP DIES 3/16" | 1 | |
| 839B1-5 | CHERRY FLARING SNAP DIE | 1 | |
| 839B1-6 | CHERRY FLARING SNAP DIE | 1 | |
| 839C1-4 | HOLLOW END EZ BUCK FLARING SET 1/8" D | 1 | |
| 839C1-5 | HOLLOW END EZ BUCK FLARING SET 5/32" D | 1 | |
| 839C1-6 | HOLLOW END EZ BUCK FLARING SET 3/16" D | 2 | |
| 839C1-7 | HOLLOW END EZ BUCK FLARING SET 7/32" D | 1 | |
| 83A-8 | STARRETT 83A-8 YANKEE SPRING-TYPE DIVIDERS, 6" | 1 | |
| 83B-8 | YANKEE SPRING-TYPE DIVIDERS, 8" SIZE AND CAPACITY, QUICK SPRING NUT, FLAT LEG | 1 | |
| 8436-012 | DOLLY WHEEL OR BRAKE CHANGE (COLUMBUS JACK / REGENT MANUFACTURING) | 1 | |
| 844/II - 160KN | RING-TYPE LOAD CELL 844 | 1 | |
| 844/II - 25KN | RING-TYPE LOAD CELL 844 | 2 | |
| 844/II - 40KN | RING-TYPE LOAD CELL 844 | 1 | |
| 844/II - 63KN | RING-TYPE LOAD CELL 844 | 2 | |
| 844/II4KN | RING-TYPE LOAD CELL | 1 | |
| 856A 2354G01 | GUIDE PIN TOOL SET NO. 5 BEARING SUPPORT INSTALLATION | 1 | |
| 856A 2367G01 | RING TORQUE DISTRIBUTION | 1 | |
| 856A 2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A 2421G02 | RING HOLDING STAGE 1 OUTER STATIONARY AIR SEAL | 4 | |
| 856A 2826G03 | FIXTURE HOLDING NO.4 BEARING | 2 | |
| 856A 3358G03 | FIXTURE HOLDING NO.4BEARINGINNER RACE BOLT | 2 | |
| 856A1000 | WRENCH INSTALLATION AND REMOVAL NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000 G09 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 6 | |
| 856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 3 | |
| 856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G06 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G07 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G08 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT (WRENCH) | 4 | |
| 856A1000G09 | Wrench, Installation and Removal - No. 3 Bearing Locking Nut (wrench) | 6 | |
| 856A1033 G01 | Puller ‐ No. 3 Bearing and Gear | 5 | |
| 856A1033G01 | PULLER-NO.3BEARING AND GEAF | 5 | |
| 856A1035 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 1 | |
| 856A1035G01 | FIXTURE, HOLDING - NO. 3 BEARING IGB RETAINER NUT | 9 | |
| 856A1037 | WRENCH, PULLER RING - IGB MODULE | 1 | |
| 856A1037 G01 | Wrench Puller Ring ‐ IGB Module | 11 | |
| 856A1037G01 | Wrench, Puller Ring - IGB Module (wrench) | 11 | |
| 856A1038 | FIXTURE, INSTALLATION - IGB BEARING AND SPACER | 1 | |
| 856A1038G01 | Fixture, Installation - IGB Bearing and Spacer (installation fixture) | 9 | |
| 856A1040 | FIXTURE, REMOVAL - IGB BEARING AND SPACER | 1 | |
| 856A1040 G01 | Fixture Removal ‐ IGB Bearing and Spacer | 8 | |
| 856A1040G01 | Fixture, Removal - IGB Bearing and Spacer (removal fixture) | 8 | |
| 856A1073G03 | TRUCK HPT HORIZONTAL（TO PROVIDE FOR STORING AND TRANSPORTING THE HIGH PRESSURE TURBINE ROTOR） | 7 | |
| 856A1091 G04 | RING, PROTECTOR - HPT NOZZLE VANES, FWD AND AFT | 3 | |
| 856A1091G04 | RING, PROTECTOR - HPT NOZZLE VANES, FORWARD AND AFT (PROTECTOR RING) | 3 | |
| 856A1130G07 | TOOL SET - JACKSCREWS (JACKSCREWS) 12 856A1136 ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTI | 8 | |
| 856A1136 | ADAPTOR, NO 4. BEARING COUNTERTORQUE WRENCH TO COMBUSTION CASE | 1 | |
| 856A1136G02 | ADAPTER, NO. 4 BEARING CTR TORQUE WRENCH TO COMBUSTION CASE (ADAPTER) | 5 | |
| 856A1143G02 | FIXTURE, INSTALLATION - OUTER COOLING AIR DUCT RET RING | 8 | |
| 856A1216 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 2 | |
| 856A1216 G02 | PULLER - NO. 4 BEARING OUTER RACE, OIL SEAL AND AI | 12 | |
| 856A1216G01 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 3 | |
| 856A1216G02 | Puller - No. 4 Bearing Outer Race, Oil Seal and Air Duct (puller) | 12 | |
| 856A1216G03 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 1 | |
| 856A1219G05 | HEATER AND RING ON HPT AFT SHAFT | 2 | |
| 856A1221G01 | HEATER AND RING ON HPT AFT SHAFT | 16 | |
| 856A1313 | RING SUPPORT - ENGINE HANDLING | 2 | |
| 856A1313 G03 | Ring ‐ Engine Handling Support | 4 | |
| 856A1313 G04 | RING, SUPPORT - ENGINE HANDLING | 8 | |
| 856A1313 REV J | RING, SUPPORT-ENG. HANDLING | 1 | |
| 856A1313G01 | RING, ENGINE HANDLING SUPPORT | 1 | |
| 856A1313G02 | RING, ENGINE HANDLING SUPPORT | 1 | |
| 856A1313G03 | RING SUPT (FAN FWD) ENG HANDLING | 4 | |
| 856A1313G04 | RING SUPT (FAN FWD) ENG HANDLING | 8 | |
| 856A1313G04 | RING, ENGINE HANDLING SUPPORT | 8 | |
| 856A1313G05 | RING SUPT (FAN FWD) ENG HANDLING | 2 | |
| 856A1313G07 | RING, SUPPORT - ENGINE HANDLING (SUPPORT RING | 1 | |
| 856A1313IP06 | RING, SUPPORT-ENGINE HANDLING | 1 | |
| 856A1364G02 | PRING SET, ASSY IDENTIFICATION-MCD | 9 | |
| 856A1428 | TOOL SET, INSTALL/REMOVE - NO. 3 BEARING OUTER RACE AND SPANNER NUT (TOOL SET) | 1 | |
| 856A1428G01 | Tool Set, Install/Remove - No. 3 Bearing Outer Race and Spanner Nut (tool set) | 6 | |
| 856A1429 | PULLER, NO: 3 BALL AND ROLLER BEARING INNER RACES | 1 | |
| 856A1429G01 | PULLER, NO: 3 BALL AND ROLLER BEARING INNER RACES | 1 | |
| 856A1429G02 | Puller, No. 3 Ball and Roller Bearing Races (puller) | 5 | |
| 856A1430G02 | IGB HOLDING FIXTURE - BEARING REMOVAL | 7 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1480 | FADEC-ENGINE PRESERVATION FALSE METERING VALVE SIGNAL | 2 | |
| 856A1480G01 | FADEC-ENGINE PRESERVATION, FALSE METERING VALVE SIGN | 13 | |
| 856A1602G01 | FIXTURE, CHILL - HPT ROTOR BLADE AFT BLADE RETAINER (CHILL FIXTURE) THE CHILL FIXTURE IS USED TO HOLD DRY ICE AGAINST THE AFT HPT ROTOR DISK BLADE RETAINER, DURING DISASSEMBLY, TO RELEASE THE INTERFERENCE FIT BETWEEN THE RETAINER AND THE HPT DISK | 6 | |
| 856A1609G01 | ADAPTER, MAINTENANCE STAND - FORWARD,FAN STATORS SUPPORT RING | 1 | |
| 856A1701 | RING, SUPPORT - ENGINE HANDLING | 1 | |
| 856A1701G01 | Ring Support Engine Handling | 7 | |
| 856A1701GO1 | RING,SUPPORT - ENGINE HANDLING | 7 | |
| 856A1801 | RING, SUPPORT - ENGINE HANDLING | 1 | |
| 856A1801G01 | RING, SUPPORT - ENGINE HANDLING | 1 | |
| 856A1801G02 | RING, SUPPORT - ENGINE HANDLING | 2 | |
| 856A1801G03 | RING, SUPPORT-ENGINE HANDLING | 11 | |
| 856A1801R01 | RING, SUPPORT - ENGINE HANDLING (BRACKET) | 1 | |
| 856A1833G01 | SLEEVE, CENTERING AND REM/INST - MOD | 4 | |
| 856A1836 | ADAPTERS, MAINTENANCE STAND FWD FAN STATOR SUPPORT RING | 1 | |
| 856A1836G01 | ADAPTERS, MAINTENANCE STAND FWD FAN STATOR SUPPORT RING | 10 | |
| 856A1865G04 | WRENCH, INSTALLATION AND REMOVAL - NO. 3 BEARING LOCKING NUT | 5 | |
| 856A2011G01 | FAN DISCHARGE PRESSURE MEASURING RACK | 2 | |
| 856A211 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A211 REV B | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A2304G02 | ADAPTER TOOL SET, LIFT AND TURN - NO. 1 AND 2 BEARING SUPPORT (LIFT AND TURN ADAPTER) | 2 | |
| 856A2308 | SLEEVE, CENTERING AND REM / INST - MM3 AND MANT. | 1 | |
| 856A2308G02 | Sleeve. Centering And Rem/Install | 9 | |
| 856A2325G01 | TORQUING RING - FAN DISK/BOOSTER | 1 | |
| 856A2331 | CHECK - LEAD FOR EGT RH/LH WIRING HARNESSES | 1 | |
| 856A2331P01 | CHECKING LEAD - LH/RH EGT WIRING | 4 | |
| 856A2333G01 | Pins Guide No 1&2 Bearing | 1 | |
| 856A2334P01 | CHECKING LEAD - T49,5 WIRING HARNESS | 3 | |
| 856A2335 | STOOL, ASSY/DISASSY - NO. 1 AND 2 BEARING SUPPORT (STOOL) | 1 | |
| 856A2335G010 | STOOL, ASSY/DISASSY - NO. 1 AND 2 BEARING SUPPORT (STOOL) | 1 | |
| 856A2335G02 | Stool Assembly/Dissassembly #1&2 Bearing | 5 | |
| 856A2338G01 | Guide #1 Bearing | 1 | |
| 856A2338G02 | GUIDE - NO. 1 BEARING SUPPORT | 1 | |
| 856A2354G01 | GUIDE PIN TOOL SET - NO. 5 BEARING SUPPORT, INSTALLATION(TOOL SET) | 1 | |
| 856A2367G01 | RING, TORQUE DISTRIBUTION - ASSEMBLY OF LPT ROTOR (TORQUE DISTRIBUTION RING) | 1 | |
| 856A2374 | PULLER, HYDRAULIC - NO. 5 BEARING INNER RACE (PULLER) | 1 | |
| 856A2374G01 | PULLER, HYDRAULIC - NO. 5 BEARING INNER RACE (PULLER) | 4 | |
| 856A2374G02 | Puller, Hydraulic - No. 5 Bearing Inner Race (puller) | 6 | |
| 856A2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A2388G01 | Ring, Assembly/Disassembly | 1 | |
| 856A2404G02 | FLARING GUIDE - DRAIN OIL TUBE | 1 | |
| 856A2412 | RING,HOLD | 1 | |
| 856A2412G01 | RING HOLD HPTS SUPP | 6 | |
| 856A2412G02 | RING, HOLDING - STG 1 OUTER STATIONARY AIR SEAL AND TURBINE | 1 | |
| 856A2421G02 | HOLDING RING - OUTER STATIONNARY | 4 | |
| 856A2543 | CENTERING FIXTURE - LPT SHAFT MODULE | 2 | |
| 856A2543 G02 | Fixture Centering ‐ LPT Shaft Module | 7 | |
| 856A2543G02 | FIXTURE CENTERING LPT SHAFT MODULE | 7 | |
| 856A2567G02 | RING LIFT LPT SHAFT FWD | 7 | |
| 856A2568G01 | RING,LIFT-LPT SHAFT MODULE AFT | 9 | |
| 856A2569 | SUPPORT, CENTERING - LPT SHAFT FORWARD | 1 | |
| 856A2569G01 | SUPPORT, CENTERING - LPT SHAFT FORWARD | 1 | |
| 856A2571 | PINS, GUIDE - NO.1 AND NO.2 BEARING SUPPORT MODULE | 1 | |
| 856A2571G02 | PINS, GUIDE - NO. 1 AND NO. 2 BEARING SUPPORT | 8 | |
| 856A2609G01 | QUAD RING BLOCK JACKING-FUEL PUMP | 26 | |
| 856A2616 | SECTORS, CENTERING - FORWARD LPT SHAFT (CENTERING SECTORS) | 1 | |
| 856A2616G01 | Sectors, Centering - Forward LPT Shaft (centering sectors) | 5 | |
| 856A2663 | ADAPTER, PULLER - SPLITTER FAIRING | 2 | |
| 856A2663G01 | ADAPTER PULLER SPLITTER FAIRING | 23 | |
| 856A2677G01 | FIXTURE-REMOVAL AND INSTALLATION, REMOVABLE RETAINING RING | 21 | |
| 856A2677G01 | FIXTURE INST AND REM RETAINING RING | 21 | |
| 856A2690 | FIXTURE ALIGNMENT NO1 AND NO2 BEARING MODULE | 1 | |
| 856A2690G01 | FIXTURE ALIGNMENT NO1 AND NO2 BEARING MODULE | 4 | |
| 856A2693G03 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2702G01 | PIN, GUIDE - NO. 5 BEARING SUPPORT | 3 | |
| 856A2711 | FIXTURE, CENTERING LPT SHAFT MODULE;G01 | 1 | |
| 856A2715G03 | RING, DISTRIBUTION | 2 | |
| 856A2716 | TORQUE DISPATCHING RING | 1 | |
| 856A2716G01 | Ring Distribution | 3 | |
| 856A2723G03 | FIXTIJE. MCHINING, SLEEVE,ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A2728G02 | PIN, GUIDE - NO. 5 BEARING SUPPORT | 4 | |
| 856A2747G01 | RING HOLDING STAGE 1 OUTER STA AIR | 2 | |
| 856A2754G01 | PINS, GUIDE - NO. 1 AND NO. 2 BEARING TUBES (GUIDE PINS) | 11 | |
| 856A2757G01 | FIXTURE, CENTERING LPT SHAFT MODULE | 3 | |
| 856A2760 | RING SUPPORT HANDLE | 1 | |
| 856A2760G01 | RING SUPPORT HANDLE CONE STUB SHAFT & DISK STG 1 | 1 | |
| 856A2760G02 | RING SUPPORT HANDLE | 8 | |
| 856A2766G02 | RING-SUPPORT, HDL, CONE STUB SHAFT AND DISK | 6 | |
| 856A2781 G02 | Guide Outer Race ‐ Radial Drive Shaft Bearing | 1 | |
| 856A2789G01 | RING, CENTERING - REAR ROTATING AIR AND OIL SEALS ON LPT SHAFT (CENTERING RING) | 1 | |
| 856A2789G02 | Ring, Centering - Rear Rotating Air and Oil Seals on LPT Shaft (centering ring) | 4 | |
| 856A2792 | PULLER - CONTROL ALTERNATOR BEARING HOUSING AND GEARSHAFT ASSEMBLY (PULLER) | 1 | |
| 856A2792G01 | PULLER - CONTROL ALTERNATOR BEARING HOUSING AND GEARSHAFT ASSEMBLY (PULLER) | 5 | |
| 856A2798 | LOCKING FIXTURE AND SOCKET - AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT LOCKING (FIXTURE AND SOCKET) | 1 | |
| 856A2798G01 | LOCKING FIXTURE AND SOCKET- AGB 31/71-TOOTH GEARSHAFT BALL BEARING NUT | 5 | |
| 856A2804G01 | PROTECTIVE RING - FAN DISK | 4 | |
| 856A2821G01 | Lubricant Shield, No. 4 Bearing Retainer (protective washer) | 5 | |
| 856A2826 | HOLDING FIXTURE NO.4 BEARING | 1 | |
| 856A2826G01 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS (HOLDING FIXTURE) | 1 | |
| 856A2826G02 | HOLDING FIXTURE - N°4 BEARING INNER | 1 | |
| 856A2826G03 | HOLDING FIXTURE - N4 BEARING INNER | 2 | |
| 856A2906G02 | RING, PROTECTIVE - FAN DISK (PROTECTIVE RING) | 10 | |
| 856A2909G01 | PINS, GUIDE - NO. 1 AND NO. 2 BEARING TUBES (GUIDE PINS) | 2 | |
| 856A2921G01 | Template, Locating - No. 1 and No. 2 Bearings Oil Supply Tubes (locating template) | 6 | |
| 856A2923 | GUIDE - NO. 1 BEARING SUPPORT (GUIDE) | 1 | |
| 856A2923G01 | Guide No 1 Bearing | 3 | |
| 856A2923G03 | GUIDE NO 1 BEARING SUPPORT | 2 | |
| 856A2923G04 | GUIDE - NO. 1 BEARING SUPPORT (GUIDE) | 3 | |
| 856A2924G01 | FIXTURE, CHECKING DIM. V - NO. 1 AND NO. 2 BEARING SUPPORT | 4 | |
| 856A2940G01 | RINGS, ASSY/DISASSY - LPT COOLING TUBES AND MANIFOLDS (ASSY/DISASSY RINGS) | 2 | |
| 856A2946 | RING-PROTECTIVE FAN DISK | 2 | |
| 856A2946G01 | Ring, Protective - Fan Disk (protective ring) | 12 | |
| 856A2950G0 | FIXTURE, CENTERING - LPT SHAFT MODULE | 1 | |
| 856A2950G01 | FIXTURE, CENTERING- LPT SHAFT MODULE | 10 | |
| 856A2956 | TOOL - ASSISTANCE, FAN BLADE, RETAINING RING | 2 | |
| 856A2956G01 | Tool - Assistance, Fan Blade, Retaining Ring | 16 | |
| 856A2956G01 FAS | CFM56 FAN BLADE RETAINING RING | 2 | |
| 856A2984G02 | RING, SUPPORT - ENGINE HANDLING (RING) | 4 | |
| 856A3013 | PULLER - NO. 1 SPEED SENSOR RING (PULLER) | 1 | |
| 856A3013 G01 | Puller ‐ No. 1 Speed Sensor Ring | 1 | |
| 856A3013G02 | PULLER - NO. 1 SPEED SENSOR RING (PULLER) | 2 | |
| 856A3013G04 | Puller - No. 1 Speed Sensor Ring (puller) | 5 | |
| 856A3058G02 | PULLER HYDRAULIC №5 BEARING RACE | 4 | |
| 856A3102 | STAND #4 BEARING INNER | 1 | |
| 856A3102G02 | STAND INST. 4 BEARING INNER RACE | 2 | |
| 856A3108 | PINS GUIDE, #5 BEARING | 2 | |
| 856A3108G01 | PINS GUIDE NO 5 BEARING | 10 | |
| 856A3128P01 | PUSHER - BEARING RADIAL DRIVE SHAFT | 3 | |
| 856A3160G01 | PUSHER, RADIAL DRIVE SHAFT -ROLLER BEARING INNER RACE INSTALLATION (PUSHER) | 4 | |
| 856A3260G02 | FOR BEARING 5 DISASSEMBLY | 10 | |
| 856A3264 G01 | Positioner - Mid Stream Fairing | 3 | |
| 856A3264G01 | POSITINER- MID STREAM FAIRING | 3 | |
| 856A3265G04 | MACHING FIXTURE FOR OIL DAMPER NO.5 BEARING | 4 | |
| 856A3267 | ADAPTER, TEST RIG - NO. 1 AND 2 BEARING SUPPORT AIR FLOW CHECK (TEST RIG ADAPTER) | 1 | |
| 856A3267G02 | ADAPTOR TEST RING | 10 | |
| 856A3272 G01 | Puller ‐ No. 4 Bearing Forward Rotating Oil Seal | 5 | |
| 856A3272G01 | PULLER ‐ NO. 4 BEARING FORWARD ROTATING OIL SEAL | 5 | |
| 856A3278 | PINS GUIDE, #5 BEARING | 1 | |
| 856A3279G02 | NO.5BEARING SUPPORT TO TRF GUIDE PIN | 2 | |
| 856A3317 | LEAD,CHECK-EGT(T495) RH WIRING HARNESS | 1 | |
| 856A3317P01 | CHECK LEAD RH WIRING HARNESS EGT | 1 | |
| 856A3317P02 | Check-lead for wiring harness EGT-RH | 5 | |
| 856A3318 | LEAD,CHECK-EGT(T495) LH WIRING HARNESS | 1 | |
| 856A3318P02 | Check-lead for wiring harness EGT-LH | 5 | |
| 856A3328G01 | TOOL SET, ADAPTER - NO. 1 AND NO. 2 BEARING OIL NOZZLES AIR IMPINGEMENT (ADAPTER TOOL SET) | 5 | |
| 856A3329 G02 | No. 1 And No. 2 Bearing Air Impingement Checks Set | 3 | |
| 856A3329G02 | NO.1 AND NO.2 BEARING AIR IMP | 3 | |
| 856A3330G01 | TOOL SET, SEAL FITTING - AGB AND TGB OIL NIPPLE (LIFTING RING) | 12 | |
| 856A3358 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS | 1 | |
| 856A3358G03 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS(HOLDING FIXTURE)OBSELETE REPLACED BY 856A3358G04 THEN 856A3358G05 | 2 | |
| 856A3358G04 | FIXTURE, HOLDING - NO. 4 BEARING INNER RACE BOLTS | 2 | |
| 856A3358G05 | Fixture, Holding - No. 4 Bearing Inner Race Bolts (holding fixture) | 4 | |
| 856A33782G02 | WRENCH - FAN BLADE, RETAINER RING, REMOVAL | 1 | |
| 856A3389 | PULLER, ROLLER BEARING - RADIAL DRIVE SHAFT (ROLLER BEARING PULLER) | 1 | |
| 856A3389 G01 | Puller Roller Bearing ‐ Radial Drive Shaft | 7 | |
| 856A3389G01 | PULLER, ROLLER BEARING - RADIAL DRIVE SHAFT (ROLLER BEARING PULLER) | 7 | |
| 856A3409G01 | PIN GUIDE SPRING | 30 | |
| 856A3410 | RING DISTRIBUTION | 1 | |
| 856A3410G01 | Ring, Distribution | 6 | |
| 856A3413G01 | HOLDING RING -NO.4 BEARING ROLLERS | 1 | |
| 856A3413P02 | HOLDING RING | 1 | |
| 856A3419G02 | PINS GUIDE - NO 5 BEARING OUTER RACE INSTALLATION | 22 | |
| 856A3443 | PULLER NO. 5 BEARING ‐OUTER RACE AND SLEEVE | 1 | |
| 856A3443 G03 | Puller No. 5 Bearing ‐ Outer Race and Sleeve | 5 | |
| 856A3443G01 | PULLER NO. 5 BEARING ‐OUTER RACE AND SLEEVE | 1 | |
| 856A3443G03 | PULLER, NO. 5 BEARING - OUTER RACE AND SLEEVE (NO. 5 BEARING PULLER) | 5 | |
| 856A3443G04 | PULLER, NO.5 BEARING - OUTER RACE AND SLEEVE (PULLER) | 5 | |
| 856A3443G05 | PULLER NO. 5 BEARING ‐ OUTER RACE AND SLEEVE | 1 | |
| 856A3443G06 | PULLER, N° 5 BEARING - OUTER RACE AND SLEEVE | 6 | |
| 856A3446G01 | RING CHECK RADIAL DR SHAFT | 1 | |
| 856A3454 | TOOL SET, BALANCE RING AND CLAW EXTRACTOR - LPT SHAFT BALANCING | 1 | |
| 856A3454G03 | TOOL SET, BALANCE RING AND CLAW EXTRACTOR LPT SHAFT BALANCING | 2 | |
| 856A3469 | PULLER, FWD BALANCING BEARING LPT SHAFT | 1 | |
| 856A3469 REV A | PULLER, FWD BALANCING BEARING LPT SHAFT | 1 | |
| 856A3469G01 | PULLER. FWD BALANCING BEARING LPT SHAFT | 1 | |
| 856A3487G02 | FIXTURE # BALL BEAR.4 THE TOOL IS USED TO PROTECT THE NO. 4 BALL BEARING | 4 | |
| 856A3492G04 | WRENCH - NIPPLE LINE, NO. 5 BEARING SUPPORT (POST CFMI SB 72-0169/SB 72-0254 AND PRE CFMI SB 72-0676) | 7 | |
| 856A3492G06 | WRENCH - NIPPLE LINE, NO. 5 BEARING SUPPORT (POST CFMI SB 72-0169/SB 72-0254 AND PRE CFMI SB 72-0676) | 8 | |
| 856A3495G01 | HANDLING RING - FAN FRAME | 2 | |
| 856A3508 | SLEEVE, CENTERING AND REM / INSTAL. | 2 | |
| 856A3508G01 | SLEEVE, CENTERING AND REM / INSTAL. | 10 | |
| 856A3510G03 | 1 AND 2 BEARING SUPPORT ADAPTER, LIFT AND TURN - | 1 | |
| 856A3510G04 | 1 AND 2 BEARING SUPPORT ADAPTER, LIFT AND TURN - | 10 | |
| 856A3542G01 | WEIGHT, AXIAL LOADING - NO. 1 BEARING (AXIAL LOADING WEIGHT) | 3 | |
| 856A3555 | SOCKET, STALOCK NUT - HORIZONTAL AND INPUT BEVEL GEARSHAFT BALL BEARINGS (SOCKET) | 1 | |
| 856A3555P01 | SOCKET, STALOCK NUT - HORIZONTAL AND INPUT BEVEL GEARSHAFT BALL BEARINGS (SOCKET) | 4 | |
| 856A3556 | #1 BEARING LOAD RING | 1 | |
| 856A3556G01 | WEIGHT AXIAL LOADING - NO. 1 BEARING LHA34 DIMENSION MEASUREMENT | 7 | |
| 856A3572G01 | PIN GUIDE NO.5 BEARING SUPPORT | 11 | |
| 856A3573 | STOOL ASSY / DISASSY - 1 & 2 BEARING SUPPORT | 1 | |
| 856A3573 G03 | Stool Assy/Disassy ‐ 1 & 2 Bearing Support | 13 | |
| 856A3573G01 | STOOL ASSY / DISASSY - 1 & 2 BEARING SUPPORT | 1 | |
| 856A3573G02 | STOOL ASSY / DISASSY - 1 & 2 BEARING SUPPORT | 1 | |
| 856A3573G03 | STOOL ASSY / DISASSY - 1 & 2 BEARING SUPPORT | 13 | |
| 856A3573G03 | TOOL, ASSY/DISASSY - NO. 1 AND NO. 2 BEARING SUPPORT | 13 | |
| 856A3599 | RING PROTECTIVE FAN DISK | 1 | |
| 856A3599G01 | RING PROTECTIVE FAN DISK | 3 | |
| 856A3603G02 | CONTAINER, SHIPPING - NO. 1 AND NO. 2 BEARING SUPPORT MODULE | 1 | |
| 856A3619 G01 | Guide ‐ Outer Race Radial Drive Shaft Bearing | 1 | |
| 856A3702 | SLEEVE, CENTERING AND RAM/INST. - LPT MAJOR MODULE (SLEEVE) | 1 | |
| 856A3702G02 | Sleeve, Centering and Ram/Inst. - LPT Major Module | 9 | |
| 856A3706 | SECTOR CENTERING LPT SHAFT FWD | 1 | |
| 856A3706G01 | Sector Centering LPT Shaft Fwd End | 6 | |
| 856A3711G03 | FIXTURE, HANDLING - FAN FRAME OUTER RING (HANDLING FIXTURE) | 2 | |
| 856A3720 | RING PROTECTIVE FAN DISK | 1 | |
| 856A3720G01 | Ring Protective Fan Disk | 4 | |
| 856A3721 | ADAPTER TOOL SET LIFT AND TURN 1 & 2 BEARING SUPPORT | 1 | |
| 856A3721G01 | Adaptor Lift/Turn #1&2 Bearing Support | 1 | |
| 856A3721G02 | ADAPTER TOOL SET LIFT AND TURN 1 & 2 BEARING SUPPORT | 1 | |
| 856A3721G03 | ADAPTER TOOL SET LIFT AND TURN 1 & 2 BEARING SUPPORT | 11 | |
| 856A3721G03 | #1 & #2 BEARING MODULE BRACKETS | 11 | |
| 856A3736 | TEMPLATE, LOCATING - DRAIN TUBE AND OIL BEARING 1 TUBE. | 1 | |
| 856A3736G01 | Template, Locating Drain Tube & Oil Bearing | 7 | |
| 856A3750 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A3750G01 | FIXTURE, CENTERING LPT SHAFT MODULE | 2 | |
| 856A3750G02 | FIXTURE, CENTERING LPT SHAFT MODULE | 13 | |
| 856A3750G04 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A3751 | RING HOLD, STG. 1 0/STG. | 1 | |
| 856A3751 G02 | Holding Ring - Stage 1 Outer Sta Air Seal And Turb | 1 | |
| 856A3751G01 | Ring Hold Stage 1 Outer Stat Air Seal & Turbine Stro | 1 | |
| 856A3751G02 | RING HOLDING STG 1 OUTER STA AIR SEAL & TURBINE SHROUD SUPPORT | 1 | |
| 856A3751G03 | RING HOLDING STAGE 1 OUTER STA AIR SEAL AND TURBINE SHROUD sUPPORT | 7 | |
| 856A3751G04 | RING, HOLDING - STG 1 OUTER STATIONARY AIR SEAL | 2 | |
| 856A3754 | RINGS, ASSEMBLY/DISASSEMBLY - LPT COOLING MANIFOLDS (ASSY/DISASSEMBLY RINGS) | 1 | |
| 856A3754G01 | Ring, A/D LPT Cooling Manifold | 4 | |
| 856A3761G01 | HOLDING RING - LPT OUTER STATIONARY AIR SEAL STG2 | 6 | |
| 856A3764G01 | HOLDING RING - LPT OUTER STATIONARY AIR SEAL STG3 | 8 | |
| 856A3782 | WRENCH, REMOVE FAN BLADE RETAINER RING | 1 | |
| 856A3782G01 | Wrench, I/R Fan Blade Retainer Ring | 6 | |
| 856A3782G02 | Wrench-FanBlade,RetainerRing,Removal | 26 | |
| 856A3782G02 | WRENCH - REMOVAL FAN BLADE, RETAIRNER RING | 26 | |
| 856A3782G02 FAS | CFM56 FAN BLADE RET. RING WRENCH | 1 | |
| 856A3782G02 FAS | CFM56 FAN BLADE RET. RING WRENCH | 1 | |
| 856A3783G01 | Fixture, Check Dim 'V' N1&2 Bearing Support | 1 | |
| 856A3783G02 | Fixture - Checking Dim. V, No 1&2 Bearing Support (checking fixture) | 6 | |
| 856A3791 | FIXTURE, MACHINING, SLEEVE, ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A3791G03 | FIXTURE, MACHINING, SLEEVE, ADJUSTING - NO. 5 BEARING (MACHINING FIXTURE) | 1 | |
| 856A3791G04 | Fixture, Machining, Sleeve, Adjusting - No. 5 Bearing | 3 | |
| 856A3794 | RING, HOLDING STG 1 OUTER | 1 | |
| 856A3794G01 | RING, HOLDING STG. 1 | 9 | |
| 856A3799 | #5 BEARING SUPPORT GUIDE PIN | 1 | |
| 856A3799G01 | Pins, Guide - No. 5 Bearing Support (guide pins) | 5 | |
| 856A3900G01 | REMOVER/INSTALLER - DETECTOR, DEBRIS MONITORING SY | 18 | |
| 856A3907 | PROTECTIVE RING - FAN DISK | 1 | |
| 856A3907P01 | RING, PROTECTIVE - FAN DISK (PROTECTIVE RING) | 2 | |
| 856A3907P02 | Ring, Protective - Fan Disk (protective ring) | 3 | |
| 856A3913G03 | FIXTURE, CHECKING - ASSEMBLY/TRF WITH NO. 5 BEARING SUPPORT (CHECKING FIXTURE) 24 AND 8 HOLES | 6 | |
| 856A3919G00 | HEATER, BEARING - NO. 2 (BEARING HEATER) USING ALTERNATE DEWALT HEATER | 1 | |
| 856A393G04 | RING DISC PLATE | 1 | |
| 856A3941G01 | PROTECTIVE RING - LPT DISK | 1 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 856A4065G01 | FIXTURE, THREAD REPAIR -NO. 3 BEARING LOCKNUT | 1 | |
| 856A4072G02 | FIXT.WELD-AFT SUPPORT RING | 1 | |
| 856A4209G02 | GAGE, DIAMETER - OUTER LINER SUPPORT RING | 2 | |
| 856A4209G03 | GAGE, DIAMETER-OUTER LINER SUPPORT RING | 1 | |
| 856A4234P12 | FORWARD OD RESTRAINING RING | 1 | |
| 856A4234P13 | AFT OD RESTRAINING RING | 1 | |
| 856A4624 | FIXTURE SCOURING ABRADABLE STRIP FAN CASE | 1 | |
| 856A4624G02 | FIXTURE - SCOURING, ABRADABLE STRIP, FAN CASE | 1 | |
| 856A4624G03 | Fixture, Scouring - Abradable Strip Fan Case | 5 | |
| 856A5782G02 | WRENCH-FAN BLADE,RETAINING RING | 1 | |
| 856A6754G02 | PRETWIST RESTORING FIXTURE - LPT BLADES STG 1/4 | 1 | |
| 856A6754G03 | PRETWIST RESTORING FIXTURE - LPT BLADES STG 1/4 | 1 | |
| 856A6754G05 | PRETWIST RESTORING FIXTURE - LPT BLADES STG 1/4 | 1 | |
| 856A6754G06 | PRETWIST RESTORING FIXTURE - LPT BLADES STG 1/4 | 1 | |
| 856AI037 | WRENCH PULLER RING IGB MODULE | 1 | |
| 856А3750 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856А3750G02 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 85A1801G03 | RING, SUPPORT-ENGINE HANDLING | 1 | |
| 85AY187600A0 | BRUSH, DEBURRING | 1 | |
| 85AY250500A0 | BRUSH, DEBURRING | 1 | |
| 8605150S02 | WIRING TOOL - PROCEDURE | 3 | |
| 8629K12 | NEOPRENE SPRING RUBBER RODS 1" dia 3 ft long 75A-price per pc | 1 | |
| 865A3317 | LEAD CHECK EGT RH WIRING HARDNESS | 1 | |
| 865A3318 | LEAD CHECK EGT RH WIRING HARDNESS | 1 | |
| 86ACF | 6 INCH SNAPON DIAGONAL CUTTERING PLIERS | 1 | |
| 872D | SOLDERING STATION | 1 | |
| 8792-10 | GEDORE 027280 10 MM RING END 8792-10, TORQUE WRENC | 1 | |
| 8792-11 | GEDORE 027300 11 MM RING END 8792-11, TORQUE WRENC | 1 | |
| 8792-12 | GEDORE 027320 12 MM RING END 8792-12, TORQUE WRENC | 1 | |
| 8792-13 | GEDORE 027340 13 MM RING END 8792-13, TORQUE WRENC | 1 | |
| 8792-14 | GEDORE 027360 14 MM RING END 8792-14, TORQUE WRENC | 1 | |
| 8792-15 | GEDORE 027380 15 MM RING END 8792-15, TORQUE WRENC | 1 | |
| 8792-16 | GEDORE 027400 16 MM RING END 8792-16, TORQUE WRENC | 1 | |
| 8792-17 | GEDORE 027420 17 MM RING END 8792-17, TORQUE WRENC | 1 | |
| 8792-18 | GEDORE 027440 18 MM RING END 8792-18, TORQUE WRENC | 1 | |
| 8792-19 | GEDORE 027460 19 MM RING END 8792-19, TORQUE WRENC | 1 | |
| 8792-20 | GEDORE 027480 20 MM RING END 8792-20, TORQUE WRENC | 1 | |
| 8792-21 | GEDORE 027500 21 MM RING END 8792-21, TORQUE WRENC | 1 | |
| 8792-22 | GEDORE 027520 22 MM RING END 8792-22, TORQUE WRENC | 1 | |
| 8792-23 | GEDORE 027540 23 MM RING END 8792-23, TORQUE WRENC | 1 | |
| 8792-24 | GEDORE 027560 24 MM RING END 8792-24, TORQUE WRENC | 1 | |
| 880200-5 | RECOMMENDED, MID/WING SHORING & GEAR SWING ONLY TRIPOD JACK (25 TON/22.7 METRIC TON) 2 REQUIRED | 1 | |
| 8810007120 | BEARING DRIVER | 1 | |
| 8813 959 000/PHP | CLAMPING TOOL AND CENTERING WRENCH | 1 | |
| 8813696000 | INSTALLATION MANDREL FOR SEALING RING | 2 | |
| 8813959000 | CLAMPING TOOL AND CENTERING WRENCH | 1 | |
| 8818171000 | OIL AND GAS SEPARATOR SEALING RING REMOVAL TOOL | 1 | |
| 8818378000 | DIMENSION MEASURING TOOL | 1 | |
| 8818842000 | DRIVE SHAFT BEARING EXTRACTOR | 1 | |
| 8819958000 | RING HOLDING TOOL | 1 | |
| 881TB | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| 8894T4 | ROUND RING STEEL ¿7/8ID NICKEL PLATED | 1 | |
| 8928-Z7/18 | D RING EXTENSION SLING (MILLER) | 1 | |
| 8928-Z7/18INBK | D RING EXTENSION SLING (MILLER) | 1 | |
| 895-3101-04-147 | MR TAB BENDING AND MEASURING TOOL | 1 | |
| 895-3101-24-1 | MR TAB BENDING AND MEASURING TOOL | 1 | |
| 895-3101-35-107 | DAMPER BEARING TOOL | 1 | |
| 895-3101-4-117 | MR TAB BENDING AND MEASURING TOOL | 1 | |
| 8C2055 | FIXTURE, SPREADER-RETAINING RING, HPTR | 1 | |
| 8C2185 | FIXTURE, HOLDING – STG 1 VSV RING | 1 | |
| 8C2472 | RING, CENTERING - LPT MODULE | 1 | |
| 8C2501 | STAND ASSEMBLY/DISASSEMBLY NO. 1 BEARING | 1 | |
| 8C2508 | NO. 1 BEARING ASSEMBLY GUIDE | 1 | |
| 8C2520 | FIXTURE, REMOVE - KEYED RING, FAN SHAFT | 1 | |
| 8C2530 | FIXTURE, LIFT AND TURN NO. 2 BEARING HOUSING | 1 | |
| 8C2531 | STAND, ASSEMBLY/DISASSEMBLY NO. 2 BEARING HOUSING | 1 | |
| 8C2547 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 8C2551 | INSTALLATION TOOL - NO. 2 BEARING OUTER RACE AND BALL | 1 | |
| 8C3254 | SEATING TOOL RING - NO 3 DAMPER HSG ASSY | 1 | |
| 8C3472 | PULLER - MECHANICAL - AGBX - RING MATING - IDG | 1 | |
| 8C3486 | PULLER - MECHANICAL - AGBX - RING MATING - HP2 - CRANK SIDE | 1 | |
| 8C3546 | RING - GUIDE - TGBX - SUPPORT HORIZONTAL | 1 | |
| 8G6000G00131 | PULLER KIT, M/R AND T/R UPPER CONICAL RING REM | 1 | |
| 8G6220G00131 | TOOL, MR SLIDING RING CENTERING | 1 | |
| 8G6230G04031 | TOOL,M/R SCISSOR FLANGED BEARING REM/INSTL | 1 | |
| 8G6320G1443! | TOOL KIT, T/R DRIVE QUILL RING NUT REM/INST | 1 | |
| 8G6320G14431 | TOOL KIT, T/R DRIVE QUILL RING NUT REM/INST | 1 | |
| 8G6430G0331 | TR DUPLEX BEARING REMOVAL/INSTALLATION TOOL | 1 | |
| 8G6430G03331 | TOOL KIT, T/R DUPLEX BEARING REM / INSTL | 1 | |
| 8G6430G03331GAM | TOOL KIT T/R DUPLEX BEARING REMOVER INSTALLATION | 1 | |
| 8G6430G03731 | TOOL KIT T/R DUPLEX BEARING REMOVAL | 1 | |
| 8G6430G04031 | TOOL KIT T/R DUPLEX BEARING INSTALLATION | 1 | |
| 8MLELAKE | BLIND INNER BEARING PULLER HOLE REMOVER | 1 | |
| 8PK-SC107A | SOLDERING IRON 115VAC | 1 | |
| 90-TFBX | Bowers 23° BXR Ring Groove Dia/Width Sett Block | 1 | |
| 900-0014-001 | DRIVE SPRING WINDING TOOL | 1 | |
| 9000-96 | BALL BEARING NE PLUS CDER | 1 | |
| 900020-045 | DEBURRING BLADE | 1 | |
| 900034-045 | DEBURRING BLADE | 1 | |
| 901-15160-2 | VXP/EVXP KIT, TAG-X-145 CHADWICK-HELMUT / HONEYWELL VXP VIBRATION MONITORING SYSTEM | 2 | |
| 90177A216 | SPLIT RING .740 OD X .105 THICKSTEEL NICKEL PLATE | 1 | |
| 905011-1 | Endplay Measuring Fixture | 1 | |
| 907816-1-1 | THRUST-BEARING END PLAY MEASURING FIXTURE | 1 | |
| 90905A656 | SPLIT RING - FULL ROUND 1-3/8" OD | 1 | |
| 9092-015 | DOLLY WHEEL OR BRAKE CHANGE (COLUMBUS JACK / REGENT MANUFACTURING) | 1 | |
| 9092F | TOWBAR DOLLY (COLUMBUS JACK / REGENT MANUFACTURING) | 2 | |
| 9142702600 | WRENCH ADAPTER - RING NUT | 1 | |
| 915-21 | Spring discarge | 2 | |
| 91500-1 | Spring Repl (DBL Seat) | 8 | |
| 9202M | NOSE LANDING GEAR STEERING TESTER | 1 | |
| 92326-08 | HOISTING RING FOR ENGINE 2 AFTERBODY | 1 | |
| 92373A183 | SPRING PIN 1/8 DIAM" | 1 | |
| 92384A036 | BALL LOCK PIN 1/4 X 1"1/2 RING HANDLE STAINLESS | 1 | |
| 92384A037 | BALL LOCK PIN 1/4 X 1"3/4 RING HANDLE STAINLESS | 1 | |
| 9258-450 | O-RING ENCAPSULATED | 1 | |
| 92700-10316-041 | SPRING CAPSULE HOLDING CLAMP | 1 | |
| 92700-10353-042 | DAMPER BEARING TQ ADJUSTER | 1 | |
| 931461950 | SOLDERING KIT NOZZLE | 1 | |
| 934826-1 | Bearing Removal Adapter Assembly | 1 | |
| 9352M62P06 | BEARING-SPD OVR SIZE 0.01IN 0.004MM | 1 | |
| 94117ASSY16Z5505-1 | STEERING BAR (HAND BAR) | 1 | |
| 94125K711 | Compression Spring Music Wire 18mm Overall 12mm OD 200mm Wire | 1 | |
| 94125K815 | METRIC COMPRESSION SPRING 44.5 LG X 11.25 OD X 1.25 WIRE | 1 | |
| 9415M88 | DISASSY TOOL - BEARING HOUSING | 1 | |
| 9441M59 | PAD, PUSHER-BEARING & HSG. | 1 | |
| 9441M59 REV A | PAD, PUSHER-BEARING & HSG. | 1 | |
| 9446M39 | BUILD STAND-NO 4 BEARING HOUSING | 1 | |
| 9446M60P02 | HAND HELD RING PLACEMENT TOOL | 1 | |
| 94505A564 | Locking Push-Pull Quick-Release Pin Ring Handle 38 Diameter 2 Usable Length | 1 | |
| 9452K19 | O-RING BUNA-N 5/16 X 7/16 DASH#011 | 1 | |
| 946F786-3 | PRINTED WIRING ASSEMBLY | 1 | |
| 946F787-2 | PRINTED WIRING ASSEMBLY | 1 | |
| 947F456-1 | PRINTED WIRING ASSEMBLY | 1 | |
| 9480M66G01 | PUSHER, BEARING AND | 1 | |
| 9486M88G02 | IDG MATING RING EXTRACTOR | 1 | |
| 95-92020-0001 | LANDING GEAR RINGGING ASSEMBLY | 1 | |
| 95-93034-0001/-02 | STOP ADJUSTMENT TOOL IN STEERING COCKPIT | 1 | |
| 95165A035 | DOUBLE BALL RING GRIP SELF-LOCKING | 1 | |
| 9560003200 | PREINFLATED O'RING | 1 | |
| 9560004100 | PREINFLATED O'RING | 1 | |
| 9560166950 | PIPE, PT BEARING DRAIN, FLEXIBLE | 1 | |
| 9560175670 | DU RING | 1 | |
| 9560176730 | LOAD BEARING MAG SEAL | 1 | |
| 956A1037 | FIXTURE - RESTRAINING - FWD ROTATING OIL SEAL NO. 4 BEARING | 1 | |
| 956A1526 | FIXTURE - LOADING BALL BEARINGS LEAP 1A/1C | 1 | |
| 956A1602P01 | KIT, PRESERVATION - ENGINE FOR LEAP-1A/-1B/-1C ENGINES PRESERVES ENGINE DURING LONG STORAGE PERIOD WHEN IT IS OFF OF THE WING. | 5 | |
| 956A1613 | ADAPTER, FUEL METERING UNIT | 1 | |
| 956A1613G01 | FUEL METERING UNIT ADAPTER | 6 | |
| 956A3039 | PULLER - ASSEMBLY-NO. 4 BEARING FWD ROTATING OIL SEAL | 1 | |
| 956A3099 | MANIFOLD - HEATING-NO 4 BEARING OUTER RACE | 1 | |
| 956A6006 | FIXTURE, GUIDE - NO.1-2 BEARING SUPPORT | 1 | |
| 956A6010 | FIXTURE - GUIDE - NO. 1-2 BEARING SUPPORT | 1 | |
| 956A6030 | FIXTURE - GUIDE - BEARING SPT 1-2 | 1 | |
| 956A6105 | FIXTURE - INSTALL - RDE RING | 1 | |
| 956A6113 | FIXTURE - GUIDE - PADS RING | 1 | |
| 956A613G01 | ADAPTER, FUEL METERING UNIT | 1 | |
| 956A6158 | TOOL KIT - INSTALL & REMOVAL - BEARING SPT 1 AND 2 (SP) | 1 | |
| 956A6202 | PUSHER/PULLER SET - DAMPER BEARINGS | 1 | |
| 956A6232 | CLAWS REMOVE - BEARING, TGB MORS DEXTRACTION | 1 | |
| 956A6244 | SET - PUSHER - BEARING - RDS | 1 | |
| 956A6247 | SET, PULLER - BEARING, RDS | 1 | |
| 956A6269 | CLAWS REMOVE - BEARING, AGB MORS DEXTRACTION | 1 | |
| 956A6329 | KIT - HANDLING - LPT SPECIAL PROCEDURE ROTATING RING STG1 | 1 | |
| 956A6466 | FIXTURE - DISASSY-LPT SEAL RING STAGE 2-3 | 1 | |
| 956A6479 | DUMMY - LPT RETAINING RING STAGE 7 | 1 | |
| 956A6484 | DUMMY - LOCKING NUT - LPT BEARING -ROLLER 5 | 1 | |
| 956A6515 | PULLER - LPT DISK STG 5 ROTATING SEAL RING | 1 | |
| 956A6526 | FIXTURE - INSTALLATION AND REMOVAL - RETAINING RING | 1 | |
| 956A6535 | FIXTURE - CENTERING RING - LPT DISK 1 | 1 | |
| 956A6581 | FIXTURE - LIFT - NO.5 BEARING SUPPORT EQUIPPED | 1 | |
| 956A6800 | STAND - SHIPPING - BEARING SUPPORT 1/2 | 1 | |
| 956A6801 | STAND - STORAGE - BEARING SUPPORT 1/2 | 1 | |
| 956A6810 | FIXTURE - LIFT AND TURN - 1 & 2 BEARING SUPPORT | 1 | |
| 956A6825 | GUIDE, INSTALLATION - BEARING 2 | 1 | |
| 956A6826 | DOLLY - STORAGE - BEARING SUPPORT 1/2 | 1 | |
| 956A6827 | FIXTURE - LIFTING - AND TURN - SHAFT - SUPPORT BEARING 2 | 1 | |
| 956A6835 | GUIDE, INSTALLATION - SUPPORT BEARING 1 | 1 | |
| 956A7015G01 | SPLITTER FAIRING PULLER ADAPTER | 3 | |
| 956A8002 | FIXTURE - GUIDE - 1-2 BEARING SUPPORT | 1 | |
| 956A8004 | FIXTURE - LIFT AND TURN - BEARING 1/2 | 1 | |
| 956A8006 | FIXTURE - GUIDE - BEARING 1/2 SUPPORT | 1 | |
| 956A8008 | DOLLY - SHROUD STORAGE - BEARING 1/2 | 1 | |
| 956A8014 | DOLLY - STORAGE - BEARING LIFTING DEVICE | 1 | |
| 956A8040G01 | PIN, GUIDE � SPLITTER FLOW FAIRING | 6 | |
| 956A8112 | DUMMY NUT - REMOVE - HOUSING - BEARING 3 DAMPER | 1 | |
| 956A8113 | FIXTURE - REMOVE - HOUSING - BEARING 3 DAMPER | 1 | |
| 956A8404 | FIXTURE - HOLDING RING - LPT CASE | 1 | |
| 956A8430 | FIXTURE - INSTALL - BOLT D - RETAINING RING | 1 | |
| 956A8432 | FIXTURE - DOG-CLUTCHING - RING - SEAL STG 2 | 1 | |
| 956A8492 | FIXTURE - ASSEMBLY STAND - NO.5 BEARING SUPPORT | 1 | |
| 956A8520 | GUIDE - PIN - LPT BEARING 5 ASSY | 1 | |
| 956A8541 | FIXTURE - LIFT AND TURN - NO.5 BEARING SUPPORT | 1 | |
| 956A8600P101 | RETAINING EXTERNAL RING, 12MM D | 1 | |
| 956A8648 | SUPPORT - RADIAL CENTERING - ENGINE ASSY | 1 | |
| 956A8802 | FIXTURE - ASSY/DISASSY - SUPPORT BEARING 2 | 1 | |
| 956A8804 | FIXTURE - ASSY/DISASSY - SUPPORT BEARING 1 | 1 | |
| 956A8810 | FIXTURE - LIFT AND TURN - 1 & 2 BEARING SUPPORT | 1 | |
| 956A8818 | GUIDE - INSTALLATION BEARING 2 OUTER RACE | 1 | |
| 956A8823 | GUIDE - INSTALLATION - BEARING 2 | 1 | |
| 956A8824 | DOLLY - STORAGE - BEARING SUPPORT 1/2 | 1 | |
| 956A8825 | FIXTURE - LIFTING AND TURN - SHAFT / SUPPORT BEARING 2 | 1 | |
| 956A8833 | GUIDE - INSTALLATION - SUPPORT BEARING 1/ SUPPORT BEARING 2 | 1 | |
| 956A8871 | FIXTURE - TORQUE - LPC AND BEARING SUPPORT | 1 | |
| 956A8907 | SET - LOAD - BEARING - TGB/AGB | 1 | |
| 956A8917 | SET - PUSHER - LINE 1 AND 2 BEARING - TGB | 1 | |
| 956A8937 | SET - LOAD - BEARING - TGB | 1 | |
| 956A8941 | SET - PUSHER - LINE 1 AND 2 BEARING - AGB | 1 | |
| 956A8943 | SET - PULLER - LINE 1 AND 2 BEARING - AGB | 1 | |
| 956A8952 | GUIDE - PUSHER - LINE 3 - 4 AND 5 BEARING - AGB | 1 | |
| 956A8954 | FIXTURE - SUPPORT - LINE 4 AND 5 BEARING - AGB | 1 | |
| 956A8956 | SET, PULLER - LINE 5 AND 9 BEARING, AGB | 1 | |
| 956A8957 | SET - PUSHER - LINE 6 - 7 - 8 AND 9 BEARING - AGB | 1 | |
| 956A8958 | GUIDE, PUSHER - LINE 7 BEARING, AGB | 1 | |
| 956A8960 | FIXTURE - SUPPORT - LINE 6 AND 9 BEARING - AGB | 1 | |
| 956A8962 | FIXTURE - SUPPORT - LINE 6 - 7 AND 8 BEARING - AGB | 1 | |
| 956A8965 | GUIDE - PUSHER - LINE 8 BEARING - AGB | 1 | |
| 956A8976 | SET - PUSHER - BEARING - RDS | 1 | |
| 956A8992 | SET - PUSHER BEARING - RDS | 1 | |
| 96404302 | 12161/6 VDE-SET VDE SINGLE-END RING SPANRS | 2 | |
| 96410405 | 20/8-DOUBLE ENDED RING SPANNER SETS | 1 | |
| 96410406 | 20/12-DOUBLE ENDED RING SPANNER SETS | 1 | |
| 96410409 | 20/9.MIDI-RING SPANNER SET | 1 | |
| 96410501 | 21/10-DOUBLE ENDED RING SPANNER SETS | 1 | |
| 96410503 | REF: 21/7-DOUBLE ENDED RING SPANNER SETS | 1 | |
| 96410704 | NO:23/8-DOUBLE ENDED RING SPANNER SETS | 1 | |
| 96414405 | 20A/10-DE RING SPANNER SETS IMP 10PC | 1 | |
| 9649-38 | SPRINGED WHEEL | 1 | |
| 96838107 | SET DOUBLE ENDED RING SPANNERS | 1 | |
| 9609000793 | CYLINDRICAL ROLLER BEARING | 1 | |
| 9609000794 | CYLINDRICAL ROLLER BEARING | 1 | |
| 9657K115 | COMPRESSION SPRING 1/2 OD X 0.047 WIRE X 3" LG | 1 | |
| 9657K232 | COMPRESSION SPRING 5/16ÕÕ O.D. X 3ÕÕ LG | 1 | |
| 9657K73 | COMPRESSION SPRING 7/32 OD X .023 WIRE X 1" LONG | 1 | |
| 9666K53 | SPRING STEEL WIRE .125 DIA. | 1 | |
| 96838171 | SET OF CHROME PALTED OPEN RING SPANNERS | 1 | |
| 9692A | CONNECTOR, RING, DN08 / NATO M | 1 | |
| 96995A120 | LOBE RETAINING RING 0.225 DIA X 0.105 DIA X 0.030 | 1 | |
| 9785A | CONNECTOR, RING, DN08 / NATO F | 1 | |
| 97A27003000002 | DYNAMOMETER SPRING ESCALE | 10 | |
| 97A27102024000 | MEASURING EQUIPMENT - AILERON TRIM CONTROL OPERAT LOAD | 1 | |
| 97A27202011000 | MEASURING EQUIPMENT-RUDDER TRIM CONTROL OPERATING LOAD | 1 | |
| 97A27302010000 | MEASURING EQUIPMENT -PITCH TRIM CONTROL OPERATING LOAD | 2 | |
| 97A27602009000 | MEASURING EQUIPMENT - SPEEDBRAKE CONTROL | 1 | |
| 97A27902026000 | RING-LOCKING,RUDDER AND AILERON TRIM CONTROLS WHEELS | 3 | |
| 97A28002549000 | ADAPTER, O-RING SEALS | 5 | |
| 97A29102090000 | TOOL SET-REMOVAL BOBBINS AND INSTALLATION RINGS | 14 | |
| 97A32302001000 | LOAD MEASURING TOOL | 2 | |
| 97A49602000000 | MEASURING EQUIPMENT - RAT CONTROL OPERATING LOAD | 2 | |
| 97A76102003000 | ADAPTER-SPRING SCALE,THROTTLE CONTROL LEVER | 8 | |
| 97A76102008000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 1 | |
| 97F57008668000 | TESTER-AXIAL PROOFLOAD,MOVABLE FAIRINGS | 1 | |
| 97L57508828000 | DRILL TOOL-FLAP FAIRING DRIVE BRACKET LH | 2 | |
| 97L57508828001 | DRILL TOOL-FLAP FAIRING DRIVE TOOL RH | 2 | |
| 980-101-000-011 | CABLE - ADVANCED AIRBORNE VIBRATION MONITORING EQUIPMENT | 2 | |
| 98585A118 | HEAVY DUTY 7/8 EXTERNAL RETAINING RING STEEL BLACK OX. | 1 | |
| 9891007004 | JFM Engineering 9891007004 Battery Trickle Charger, TCS-1 Model, ALT: 9891007 | 4 | |
| 9899603001 | REPAIR BATTERRY CHARGER- ANALYZER, SUPERMASTERCHARG ER, BRAND: JFM ENGINEERING. INC | 8 | |
| 98A07003900004 | SLING-FITTED WITH RING | 1 | |
| 98A07003907200ENG | Adaptor Load-cell for Eng Shoring Jack | 1 | |
| 98A07003913000 | SHORING ADAPTOR | 1 | |
| 98A08001005000 | HOLDING SET - MEASURING CORD | 5 | |
| 98A08001005001 | Set-holding measuring cord dispositif p0Ur | 2 | |
| 98A08001005002 | Set-holding measuring cord dispositif p0Ur | 1 | |
| 98A20003012000 | KIT DE SERTISSAGE BEARING | 3 | |
| 98A25207593000 | TENSION DEVICE - SPRING, ATTENDANT SEAT | 1 | |
| 98A27203000000 | MEASURING EQUIPMENT-RUDDER PEDAL OPERATING LOAD (A) | 1 | |
| 98A27203250000 | MEASURING EQUIPMENT-RUDDER PEDAL OPERATING LOAD | 5 | |
| 98A27203250002 | MEASURING EQUIPMENT - RUDDER PEDAL OPERATING LOAD | 6 | |
| 98A27203501000 | MEASURING EQUIPMENT-RUDDER PEDAL OPERATING LOAD | 1 | |
| 98A27203501004 | MEASURING EQUIPMENT-RUDDER PEDAL OPERATING LOAD | 1 | |
| 98A27207507000 | EXTRACTOR - RUDDER BEARINGS | 5 | |
| 98A27207507001 | EXTRACTOR-RUDDER BEARINGS | 5 | |
| 98A27207507004 | EXTRACTOR-RUDDER BEARINGS | 1 | |
| 98A27207507008 | EXTRACTOR-RUDDER BEARINGS | 1 | |
| 98A27207507010 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507011 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507012 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507013 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507014 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507015 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507016 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507017 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507018 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507019 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507020 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507021 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507022 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507023 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507024 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507025 | NO4 RUDDER HINGE BEARING TOOLS | 1 | |
| 98A27207507100 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507101 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507102 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507103 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507104 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507105 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507106 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507200 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507300 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507400 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507500 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207507800 | EXTRACTOR-RUDDER BEARINGS | 1 | |
| 98A27207507900 | TOOL, RUDDER BEARING | 1 | |
| 98A27207507950 | EXTRACTOR RUD BEARING | 1 | |
| 98A27207601000 | EINSTELLDORN FUER PIN,RINGGING,VARIABLE STOP UNIT | 5 | |
| 98A27208423000 | EXTRACTOR-RUDDER BEARINGS | 1 | |
| 98A27208423001 | EXTRACTOR-RUDDER BEARINGS | 6 | |
| 98A27301002000 | MEASURING EQUIPMENT-THS DEFLECTION | 2 | |
| 98A27303002000 | CENTERING BULLETS AND PINS - ELEVATOR HINGE PINS | 8 | |
| 98A27303502000 | MEASURING EQUIPMENT T.H.S DEFLECTION | 2 | |
| 98A27307545000 | EINSTELLDORN FUER PIN,RINGGING,CABLE QUADRANTS RUDDER | 8 | |
| 98A27307549004 | PERLON STRING,TWISTEDN | 1 | |
| 98A27403000000 | MEASURING EQUIPMENT-PITCH TRIM CONTROL OPERATING LOAD | 4 | |
| 98A27407508000 | WERKZEUGSATZ FUER HLW-MONTAGE TOOL SET INSTALLATION AND REMOVAL HORIZONTAL STABILIZER BEARINGS | 1 | |
| 98A27503504000 | MEASURING EQUIPMENT - FLAP AND SLAT CONTROL LEVER | 1 | |
| 98A27504003000 | Extractor bearing assyflap track 2 forward mounting | 6 | |
| 98A27504004000 | EXTRACTOR - BEARING ASSEMBLY, FLAP TRACKS 3, 4 AND 5, FORWARD MOUNTING | 4 | |
| 98A27504005000 | EXTRACTOR - BEARING ASSEMBLY, FLAP NO.6, FORWARD MOUNTING | 6 | |
| 98A27504022000 | CONTROL SETTING DEVICE-FLAP TRACK FAIRING | 8 | |
| 98A27504022200 | ROD MEASURING TOOL | 1 | |
| 98A27504030000 | SPANNER - FORWARD BEARING RETAINING RING FLAP TRACK NO.2 | 3 | |
| 98A27504030001 | SPANNER-FWD BEARING RETAINING RING, FLAP TRACK 2 | 3 | |
| 98A27508011000 | CONTROL SETTING DEVICE - FLAP TRACK FAIRINGS | 3 | |
| 98A27508022000 | MEASURING DEVICE-OVERTRAVEL FLAP, SCREW JACKS 1 THRU 4 | 3 | |
| 98A27508051000 | SETTING DEVICE SET-SUPPORTING SPRING,FLAP SCREW JACK 1 | 1 | |
| 98A27508054000 | SETTING JIG-SPRING ROD VANE MECHANISM | 1 | |
| 98A27508375000 | TOOL - SPRING UNIT, VANE TRACK 2 AND 4 | 1 | |
| 98A27603009000 | EQUIPMENT-LOAD MEASURING | 1 | |
| 98A27808005000 | MEASURING DEVICE - SLAT TRAILING EDGE | 1 | |
| 98A27808006000 | MEASURING DEVICE - SLAT LEADING EDGE | 3 | |
| 98A27808006000 | MEASURING DEVICE - SLAT LEADING EDGE | 3 | |
| 98A27808006001 | MEASURING DEVICE-SLAT LEADING EDGE | 1 | |
| 98A27808006200 | MEASURING DEVICE.COMPL. | 1 | |
| 98A27808006300 | MEASURING DEVICE.COMPL. | 1 | |
| 98A27808007000 | DEVICE MEASURING SLAT | 5 | |
| 98A27901002000 | RINGGING PIN, RUDDER CONTROL | 33 | |
| 98A27901005000 | PIN - RIGGING, LANDING GEAR EMERGENCY LOWERING CONTROL | 7 | |
| 98A27901011000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 5 | |
| 98A27902026000 | RUDDER & AILERON LOCK RING TOOL | 1 | |
| 98A27903501000 | MEASURING EQUIPMENT-PITCH AND ROLL OPERATING LOAD | 5 | |
| 98A27903501001 | MEASURING EQUIPMENT - PITCH AND ROLL OPERATING LOAD | 9 | |
| 98A28104000000 | SEALING RING WATER DRAIN | 37 | |
| 98A28104000024 | SEALING RING WATER DRAIN PURGER | 3 | |
| 98A28109013000 | PROTECTIVE RING - STABILIZER NACA DUCT | 3 | |
| 98A29003001000 | Graduated Syringe 0.5 l (0.132 US.gal) | 2 | |
| 98A29103000-04 | HYD O-RING SET | 1 | |
| 98A32104157000 | SPANNER-SPHERICAL BEARING HOUSING-MAIN GEAR FWD PICKUP | 1 | |
| 98A32104164000 | SPANNER-SPHERICAL BEARING HOUSING-M.G. FORWARD PICK UP | 5 | |
| 98A32201004000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 6 | |
| 98A32203003000 | ROD-COMPRESSOR SPRING | 1 | |
| 98A32203004000 | TETHERING-DURING LOADING,NOSE LANDING GEAR | 2 | |
| 98A32301001000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 7 | |
| 98A32301003000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 1 | |
| 98A32301006000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 5 | |
| 98A32301007000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 5 | |
| 98A32301013000 | Pin-rigginglanding gear and door emergency lowering control | 22 | |
| 98A32301016000 | RIGGING, LANDING GEAR EMERGENCY LOWERING CONTROL . | 6 | |
| 98A32501003000 | PIN RIGGING, LANDING GEAR EMERGENCY LOWERING CONTROL . | 9 | |
| 98A32503501000 | INSTRUMENT-TO CHECK THE FORCE THRESHOLD OF THE SPRING | 1 | |
| 98A32503503000 | GRADUATED DRUM-NOSEWHEEL STEERING CONTROL HANDWHEEL | 4 | |
| 98A52007522000 | MEASURING TOOL CARGO DOOR | 5 | |
| 98A52108005000 | WEAR MEASURING UNIT - DOOR AND FUSELAGE STOP FITTING | 11 | |
| 98A52108006000 | WEAR MEASURING UNIT - DOOR AND FUSELAGE STOP FITTING | 9 | |
| 98A52208001234 | SPRING ROD (PART OF TOOL SET 98A52208001001) | 1 | |
| 98A52307590000 | SETTING DEVICE - SPRING UNIT, CARGO DOORS | 4 | |
| 98A52307622000 | GAGE - MEASURING, BULK CARGO DOOR LOCKING MECHANISM | 19 | |
| 98A53003010000 | MEASURING RULE-ONBOARD ROD CENTER-TO-CENTER DISTANCE | 1 | |
| 98A53601000007 | RING-HOSING ROUND BAR Φ10 | 1 | |
| 98A53703508000 | EXPANDING FIXTURE-NLG BEARING FITTING | 1 | |
| 98A54003034000 | ECROU DE MANOEUVRE MANEUVERING NUT | 1 | |
| 98A54003083000 | REBORING,TOOL-WING AND PYLON FITTING RIB12 | 3 | |
| 98A54003083002 | REBORING TOOL-WING AND PYLON FITTING RIB12 | 2 | |
| 98A54003094000 | CHAMFERING TOOL-WING AND PYLON FITTING RIB12 | 9 | |
| 98A55307626100 | MILLING AND CRIMPING DEVICE BEARING 1.5.6.7 | 1 | |
| 98A55307626200 | MILLING AND CRIMPING DEVICE BEARING 2.3.4 ACTUATOR | 1 | |
| 98A55307626300 | MILLING AND CRIMPING DEVICE BEARING 2.3.4 HINGE | 1 | |
| 98A55307626400 | MILLING AND CRIMPING DEVICE BEARING FWD,MID | 1 | |
| 98A55307626500 | MILLING AND CRIMPING DEVICE BEARING AFT | 1 | |
| 98A55308009000 | MILLING AND CRIMPING DEVICE, THS BEARINGS | 2 | |
| 98A55308295000 | MILLING AND CRIMPING DEVICE - RUDDER BEARING | 3 | |
| 98A55308403000 | MILLING AND CRIMPING DEVICE-RUDDER BEARINGS | 1 | |
| 98A55507589100 | CENTERING-BOLTS,STABILIZER FWD | 1 | |
| 98A76103000000 | PIN - RIGGING, LANDING GEAR EMERGENCY LOWERING CONTROL | 5 | |
| 98A76103003000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 1 | |
| 98A76103004000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 5 | |
| 98A76103500000 | RINGS AND COMPRESSED SPRINGS HOLDING TOOL | 1 | |
| 98D07203002000 | Adapter, shoring FR42 | 6 | |
| 98D07203002100 | Shoring Pad | 9 | |
| 98D07203003000 | SHORING ASSY UNDER FUSELAGE-FR 9-24 TO 56-60 | 1 | |
| 98D07203003001 | SHORING CRADLES | 1 | |
| 98D07203003042 | SHORING SHORING ASSY BETW EEN FR.24 AND | 3 | |
| 98D07203004000 | Engine Shoring Cradles CFM56-5A | 7 | |
| 98D07203005001 | V2500 ENGINE CRADLE shoring | 3 | |
| 98D07209001000 | THS SHORING CRADLE - SA | 10 | |
| 98D07209002000 | ADAPTOR-SHORING, THS | 1 | |
| 98D10203500000 | MOORING KIT-NLG (BASIC STANDARD TOWING BRACKET) | 6 | |
| 98D10203500002 | MOORING KIT-NLG (USED FOR OPT. B737 TOWING BRACKET) | 2 | |
| 98D10203500004 | MOORING KIT-NLG (USED FOR OPT. B727 TOWING BRACKET) | 7 | |
| 98D27203000000 | MEASURING EQUIP-RUDDER PEDAL OPERATING LOAD | 2 | |
| 98D27203000001 | LOAD MEASURING RUDDER | 3 | |
| 98D27208657 | DEVICE FREEPLAY RUDDER BEARING | 1 | |
| 98D27208657000 | DEVICE - FREEPLAY, RUDDER BEARING | 21 | |
| 98D27208657040 | DEVICE - FREEPLAY, RUDDER BEARING | 1 | |
| 98D27208657042 | DEVICE - FREEPLAY, RUDDER BEARING | 3 | |
| 98D27303003001 | RUDDER CLEARANCE MEASURING TOOL | 24 | |
| 98D27303013000 | ROD SPRING CONNECTING-TEST BENCH | 1 | |
| 98D27303018000 | ADJUSTMENT TOOL-SPRING LENGTH ROLL | 1 | |
| 98D27303022000 | RUDDER CLEARANCE MEASURING TOOL | 19 | |
| 98D27303022001 | RUDDER CLEARANCE MEASURING TOOL | 11 | |
| 98D27407505100 | NUT-SPINDLE WITH BEARING | 1 | |
| 98D27407533220 | CENTERING MANDRELL | 1 | |
| 98D27503000000 | LOAD MEASURING TOOL-FLAP SLAT CTL LEVER | 2 | |
| 98D27504025000 | BEARING HOUSING REMV.2,3,4INBD | 7 | |
| 98D27507541000 | WRENCH - BEARING, FLAP TO CARRIAGE, TRACK 2, 3 AND 4 | 10 | |
| 98D27904500000 | PIN-RINGING FOR HYDRAULI C ACTUATION | 1 | |
| 98D32104002162 | SPRING GUARD | 1 | |
| 98D32104083000 | RIGGING SPACER MLG LEG FAIRING DOOR (A31 | 16 | |
| 98D32203000000 | SPRING ROD-MAINTENANCE TOOL | 1 | |
| 98D52207539000 | ADJ.RING EMERGENCY DOOR | 13 | |
| 98D52307524705 | STAINLESS STEEL BALL LOCK QUICK RELEASE PIN WITH RING HANDLE | 1 | |
| 98D55109003000 | ELEV. BEARING FREEPLAY DEVICE | 4 | |
| 98D55209004203 | SPRING CLIP DIN 110 | 1 | |
| 98D55307528000 | TOOL SET - R,I RUDDER BEARING NO. 6 | 17 | |
| 98D55307528011 | SLOTTED RING-NUT SPANNER | 1 | |
| 98D55307528100 | TORQUE-MEASURING DEVICE | 1 | |
| 98D55307529000 | Milling-crimping device rudder bearing retainers | 1 | |
| 98D57004003000 | SOCKET-RING (FOR NUT OF FWD PINTLE BEARING) | 14 | |
| 98D57004003001 | SOCKET-RING (FOR NUT OF FORWARD PINTLE BEARING) | 15 | |
| 98D57004009000 | (ALIGN.GUIDE MLG FWD FITTING BEARING) | 20 | |
| 98D57004016000 | Toothed socket（side stay bearing nut） | 2 | |
| 98D57004016001 | SOCKET, TOOTHED (SIDE STAY BEARING NUT) | 6 | |
| 98D57004028000 | HAND PULLER FWD SPIGOT BEARING A320 | 16 | |
| 98D57004033000 | SPANNER R/I BEARING, FLAP TRACK NO.2 AND | 14 | |
| 98D57004038 | CARDAN BUSH BORING TOOL - USER GUIDE | 1 | |
| 98D57004038000 | FIXTURE BORING-CARDEN FITTING | 9 | |
| 98D57004038002 | FIXTURE BORING-CARDEN FITTING | 1 | |
| 98D57004050000 | SPANNER FLAP TRACK 2 AND 3 BEARING | 5 | |
| 98D76103000000 | LOAD MEASURING TOOL-THROTTLE | 7 | |
| 98D76103000002 | LOAD MEASURING | 14 | |
| 98F07203000002 | SHORING KIT PREMOD 58082 | 1 | |
| 98F07203000003 | SHORING KIT PREMOD 58082 | 1 | |
| 98F07203000004 | SHORING KIT POST MOD 58082 | 1 | |
| 98F07203000005 | SHORING KIT POSTMOD 58082 | 1 | |
| 98F07203001000 | SHORING ASSY UNDER FUSELAGE | 1 | |
| 98F07203001040 | SHORING KIT CRADLE FRAME 11 | 2 | |
| 98F07203001042 | SHORING KIT CRADLE FRAME 17 | 2 | |
| 98F07203001044 | SHORING KIT CRADLE FRAME 26 TO 58 | 2 | |
| 98F07203001046 | SHORING KIT CRADLE FRAME 72 | 2 | |
| 98F07203001048 | SHORING KIT CRADLE FRAME 53.2 | 2 | |
| 98F07203001050 | SHORING KIT CRADLE FRAME 80 | 2 | |
| 98F07203006000 | SHORING KIT CRADLE FAME 4 | 1 | |
| 98F07203019000 | ADAPTOR WING SHORING | 1 | |
| 98F07203020000 | SHORING DEVICES | 1 | |
| 98F07203021000 | ADJUST SHORING KIT | 1 | |
| 98F07203021056 | SHORING FITTING FR53.4 AND 53.8 | 1 | |
| 98F07203021057 | SHORING FITTING FR53.4 AND 53.8 | 1 | |
| 98F07209001000 | Cradle-shoringTHS | 1 | |
| 98F10201000000 | Tooling for front axle moringb outillage damarrage train avant | 9 | |
| 98F27207505000 | PIN - LOCKING, CENTERING DEVICE | 1 | |
| 98F27207518000 | PIN - LOCKING, CENTERING DEVICE | 14 | |
| 98F28109005000 | PROTECTIVE RING - STABILIZER HANDHOLES | 1 | |
| 98F28109006000 | PROTECTIVE RING - STABILIZER NACA DUCT | 5 | |
| 98F28109007000 | RING, PROTECTIVE - STABILIZER HANDHOLES | 8 | |
| 98F28109014000 | PROTECTIVE RING - STABILIZER NACA DUCT | 1 | |
| 98F28109015000 | RING, PROTECTIVE - STABILIZER HANDHOLES | 2 | |
| 98F28109020000 | PROTECTIVE RING - STABILIZER HANDHOLES | 1 | |
| 98F29208217018 | SPRING AS PER DRAWING | 1 | |
| 98F32104001000 | TOOL-ALIGNMENT, FWD BEARING | 6 | |
| 98F32104029000 | ALIGN TOOL - FWD BEARING | 13 | |
| 98F32201000003 | ADAPTER SUPPORT TO INSTALL AND REMOVE STEEL PARTS, TO BE USED DURING AIRCRAFT REPAIR. | 5 | |
| 98F32301009000 | GUIDE CONE,CLG-LEFT BEARING-INSTALLATION | 2 | |
| 98F32301009001 | GUIDE CONE,CLG-LEFT BEARING-INSTALLATION | 1 | |
| 98F32301010000 | RIGHT BEARING INSTALLATION GUIDE - CONE CLG | 1 | |
| 98F32301010001 | RIGHT BEARING INSTALLATION GUIDE - CONE CLG | 1 | |
| 98F32301011000 | RIGHTBRG RIGHT BEARING INSTALLATION GUIDE | 1 | |
| 98F53103006000 | Drag strut boring tool | 3 | |
| 98F53303064000 | DRILLING GRID CLG BEARING | 1 | |
| 98F54503010000 | REBORING REBORING TOOL -0 WING AND PYLON | 1 | |
| 98F54503021000 | REBORRING PYRAMID TOOL | 1 | |
| 98F57004003000 | SPANNER FWD PINTLE BEARING | 11 | |
| 98F57004044000 | TOOL-BORING,CARDAN FITTING | 4 | |
| 98F57004044001 | BORING TOOL CARDAN B | 3 | |
| 98L07203006000 | SHORING ENGINE CRADLE RR | 1 | |
| 98L07209001000 | ADAPTER,SHORING-THS | 2 | |
| 98L27508444000 | HOIST-R I,MID FAIRING | 2 | |
| 98L27508444002 | HOIST R/I MID FAIRING | 1 | |
| 98L27508444040 | HOIST, MID FAIRING REMOVAL INST | 1 | |
| 98L27508444100 | HOIST, MID FAIRING REMOVAL INST | 1 | |
| 98L27508444102 | HOIST, MID FAIRING REMOVAL INST | 1 | |
| 98L27508444104 | HOIST, MID FAIRING REMOVAL INST | 1 | |
| 98L27508444200 | HOIST, MID FAIRING REMOVAL INST | 1 | |
| 98L27508444202 | HOIST, MID FAIRING REMOVAL INST | 1 | |
| 98L27508444204 | HOIST, MID FAIRING REMOVAL INST | 1 | |
| 98L27508444206 | HOIST, MID FAIRING REMOVAL INST | 1 | |
| 98L27508444210 | HOIST, MID FAIRING REMOVAL INST | 1 | |
| 98L27508469000 | HANDLE - REMOVAL INSTALLATION, FLAP TRACK FAIRING | 2 | |
| 98L27508502000 | HANDLE - REMOVAL INSTALLATION, FIXED FAIRING | 1 | |
| 98L27508637000 | TOOL-ADJUSTMENT,MID FAIRING | 3 | |
| 98L27508652000 | LIFTING DEVICE MID FAIRING | 2 | |
| 98L54503005000 | DEVICE-REMOVAL INSTALLATION,AFT PYLON FAIRING | 3 | |
| 98L55308539000 | DEVICE - MILLING AND CRIMPING, RUDDER BEARINGS | 1 | |
| 98L55308566000 | DEVICE - MILLING AND CRIMPING, RUDDER BEARINGS | 1 | |
| 98L55308567000 | DEVICE - MILLING AND CRIMPING, RUDDER BEARINGS | 1 | |
| 98L57004013000 | KIT-BORING AND CHAMFERING-UPPER CARDAN | 1 | |
| 98L57004023000 | TOOL-SPHERICAL BEARING, R AND I | 1 | |
| 98L57004025000 | KIT-UPPR CARDAN BORING AND CHAMFERING | 1 | |
| 98L57703000000 | TOOL SET,BRIDGE PLATE BEARING | 1 | |
| 98L71003000044 | ENSEMBLE ANNEAU DE LEVAGE PALAN PULL LIFT RING ASSY | 1 | |
| 98S10008000000 | GROUND MOORING KIT | 1 | |
| 98S100080000000 | GROUND MOORING KIT ( | 1 | |
| 98S10205000000 | Ground Mooring Kit | 2 | |
| 98S10205000003 | MLG GROUND MOORING KIT | 1 | |
| 98S10205000004 | Ground Mooring Kit | 3 | |
| 98S10205000004-REVB | GROUND MOORING KIT | 1 | |
| 98S10205000004-REVC | GROUND MOORING KIT (TURNBUCKLE VERSION) | 1 | |
| 98S1020500004 | GROUND MOORING KIT | 1 | |
| 98S12003000000 | WATER DRAIN PURING TOOL | 12 | |
| 98S270050041042 | RING D=24 | 1 | |
| 98S27005004125 | UNSWAGING TOOL FOR BEARING (Ø20,6 NEEDED) | 2 | |
| 98S27005004200 | EXTRACTOR FOR BEARING (Ø20,6 NEEDED) | 1 | |
| 98S27005004301 | SWAGING TOOL FOR BEARING 19DEG | 1 | |
| 98S27005005310 | SWAGING TOOL FOR BEARING 15,9 DEG | 1 | |
| 98S27005011000 | RUDDER SPRING TAB JIG | 8 | |
| 98S27008501002 | Rudder Spring Tab JIG | 3 | |
| 98S27008501003 | Rudder Spring Tab JIG | 1 | |
| 98S27305009-000 | DRILLING TOOL FOR SPRING TAB RETROFIT | 1 | |
| 98S32008226000 | SPANNER FOR ATTACH/RGLTN MLG ATR 42 (USED DURING GEAR REPLACEMENT) | 3 | |
| 98S32008226001 | SPANNER FOR ATTACH/RGLTN MLG ATR 42 (USED DURING GEAR REPLACEMENT) | 3 | |
| 98S32008903000 | SPANNER FOR ATTACH/RGLTN MLGATR 72 (USED DURING GEAR REPLACEMENT) | 2 | |
| 98S32008903001 | SPANNER FOR ATTACH/RGLTN MLGATR 72 (USED DURING GEAR REPLACEMENT) | 4 | |
| 98S52305007000 | TOOL REPAIRING SEAL CARGO DOOR | 3 | |
| 98S52405001000 | TOOL REPAIRING SEAL SERVIGE DOOR | 3 | |
| 98S53003019000 | Shoring Cradle FR42-FR44 | 6 | |
| 98S5303019000 | SHORING CRADLE | 1 | |
| 98S53305004-000 | ATR REFERENCE STANDARD PT 5 53-51-01 Figure 501, Page 506 Does not include Stringer Hook. Material: 2024-T3 Aluminum. | 5 | |
| 98S53305004000 | CROWN PAN. FRAME 13 / 23 (BONDED STRINGER) | 5 | |
| 98S53305005-000 | CALIBRATION STANDARD, BONDED WITH FLAT STRINGER ATR72 PT4 53-31-21:PG404 FIG401 | 5 | |
| 98S53305005000 | SKIN STRINGER CALIBRATION STANDARD (ULTRASON) | 5 | |
| 98S57003009000 | RESTRING PAD | 7 | |
| 98S57105016200 | TESTING GUIDE FOR EC INSPECTION ON STRINGER TOP | 3 | |
| 98S71003000013 | ENGINE HOISTING ASSY (CONNECTS TO GEABOX DURING ENGINE HOISTING) | 5 | |
| 98V07203018000 | SHORING CRADEL | 2 | |
| 98V07209001000 | CRADLE, THS SHORING | 3 | |
| 98V10201000000 | SHORING AND MOORING | 5 | |
| 98V27103002001 | 0 degree elevator actuator locking ring | 5 | |
| 98V27103003001 | Elevator actuator extends locking ring | 5 | |
| 98V27508842000 | HANDLE R/I FLAP TRACK FAIRING | 7 | |
| 98V27808794000 | SLAT RINGING TOOLS GAUGES DROOP NOSE | 7 | |
| 98V32104007000 | Main landing gear safety ring | 9 | |
| 98V32104015000 | HOIST - LEG FAIRING DOOR | 4 | |
| 98V32109002000 | PIN CENTERING SET, MLG DOOR | 4 | |
| 98a54403006100 | DUMMY SHCKLE RING | 1 | |
| 99-8088-9000 | Measuring Adaptor Kit | 2 | |
| 99-8106-4000 | Bag. Dr. Spring Drum Tool | 2 | |
| 9970-958-389P01 | PROBE, 3MHZ WITH SPRING BLADE | 1 | |
| 9988100-3 | *DATA MONITOR TO B/H WIRING ASSEMBLY | 1 | |
| 99A32401001000 | EQUIPMENT-MEASURING,BRAKE PEDAL LOAD AND TRAVEL | 1 | |
| 99A32401001001 | EQUIPMENT-MEASURING,BRAKE PEDAL LOAD AND TRAVEL | 1 | |
| 99A32501001000 | DEVICE-TEST AND ADJUST,NOSE GEAR WHEEL STEERING CONTR | 5 | |
| 99A32501010000 | DEVICE-TESTING ADJUSTMENT,N.G. WHEEL STEERING CONT | 8 | |
| 99A34201102000 | ANGLE MEASURING DEVI | 1 | |
| 99A76101501000 | PIN - RIGGING, LANDING GEAR EMERGENCY LOWERING CONTROL | 5 | |
| 99D54403007000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD 54-51-80 PART 4 PYLON AFT FIXED FAIRING UPPER SPAR. Includes Test Report and Certificate of Conformance. | 3 | |
| 99D57504109000 | REAR SPAR UNDER PYLON FAIRING | 3 | |
| 99F57204103000 | Airbus Guide Ring, A330 PT4 57-20-16:PG413 FIG408 - CAA+PRIMER | 6 | |
| 99F57204104001 | SEARCH UNIT GUIDE RING | 3 | |
| 99L26208849001 | DEVICE - FREEPLAY, RUDDER BEARING | 6 | |
| 99L57204066000 | AIRBUS A380 GUIDE RING 53-21-17 FIGURE 011. MATERIAL: BLACK ACETAL. Includes Certificate of Conformance. | 1 | |
| 9C1361G01 | FIXTURE, SPINNER AND SPINNER AFT SUPPORT RING | 1 | |
| 9C1443 | FIXTURE, RESTRAINING-LPT INNER AND OUTER LOCK RINGS | 1 | |
| 9C1532 | ADAPTER RING DISK | 1 | |
| 9C1533 | ADAPTER RING SPOOL | 1 | |
| 9C1534 | ADAPTER RING DISK | 1 | |
| 9C1536 | RING, LIFTING DISK | 1 | |
| 9C1880 | TOOL SET/RING REDUCTION | 1 | |
| 9C1897 | TOOL SET, BEARING INSTALLATION HYD PUMP DRIVEN - AGBX (FIAT) | 1 | |
| 9C1906 | BEARING INSTALLATION/IDGS GEAR | 1 | |
| 9C1907 | BEARING REMOVAL/IDGS GEAR | 1 | |
| 9C1914 | BEARING INSTALL/IDLER GEAR | 1 | |
| 9C1915 | BEARING REMOVAL/ IDLER GEAR | 1 | |
| 9C1929G02 | ACCESSORY GEARBOX CARBON SEAL AND MATING RING EXTRACTOR TOOL SET | 1 | |
| 9C2063 | DISASSY DAMPER RING TGBX ASSY | 1 | |
| 9C2065 | BEARING REMOVAL IDLER GEAR AGBX ASSY | 1 | |
| 9C2126G01 | ADAPTER RING SPOOL 7-9 | 1 | |
| 9C2128G01 | INSTALLATION TOOL, NO. 2 BEARING OUTER RACE AND BALL | 1 | |
| 9C2161 | ADAPTER RING - SPOOL STAGES 7-9 | 1 | |
| 9C2231 | ADAPTER RING SPOOL 2-5 | 1 | |
| 9C2232 | ADAPTER RING DISK STG | 1 | |
| 9C2232G01 | ADAPTER RING STAGE 2-5 SPOOL | 1 | |
| 9C2233G01 | ADAPTER RING STAGE 7-9 | 1 | |
| 9C2245G01 | Hydraulic puller ube supporter ring | 1 | |
| 9C2248 | PIN GUIDE HPCRING | 1 | |
| 9C2285 | ADAPTER RING SPOOL | 1 | |
| 9C2339 | WRENCH ADAPTER - NO 3 BEARING | 1 | |
| 9C2365 | FIXTURE, HANDLING BEARING ASSEMBLY NO 2 | 1 | |
| 9C2374 | DRIVE HANDLE RING | 1 | |
| 9C3067 | SUPERSEDED BY G02FIXTURE, RESTRAINING-NO 3 BEARING, ROTATING SEAL | 1 | |
| 9MIT65B01231-1 | ASSEMBLY GUIDE - METERING ROD, INNER CYLINDER, BODY LANDING GEAR | 1 | |
| A-259 | SPRING, COMPRESSION, SPEEDER | 5 | |
| A-C148662-1/07 | RING NUT ADAPTOR | 1 | |
| A003806D | TOWBAR - AIRPLANE, TOWING AND STEERING | 3 | |
| A003819D | TOWBAR - AIRPLANE, TOWING AND STEERING | 4 | |
| A003830D | TOWBAR - AIRPLANE, TOWING AND STEERING | 2 | |
| A00413 | CLUTCH CENTERING DEVICE (FOR OLD CLUTCH TYPES) | 1 | |
| A00458 | COMPOUND-SILICONE, COLD CURING SPECIFICATION OMAT 872 | 1 | |
| A0084 | Clamp Noise Wheel Steering Disconnect Handle | 1 | |
| A0107745 | SPANNER, MAXARET RING NUT (HYDRAULIC COUPLING TO M | 5 | |
| A0119 | Measering Tool Large Cargo Door Latches | 1 | |
| A0S465 | CONE AND ROLLERS,TAPERED ROLLER BEARING | 1 | |
| A11111 | SPRING EXPANDER NLG | 2 | |
| A11126 | TOOL -HOLDING, STEERING ACTUATOR | 1 | |
| A11135 | EXPANDER - SPRING, NLG | 2 | |
| A11179 | LOWER SLEEVE BEARING GUIDE | 1 | |
| A12008-1 | LUBRICATION ADAPTER - AFT WHEEL WELL BULKHEAD, SPHERICAL BEARING | 12 | |
| A1310B | BEARING AND SEAL DRVR ST 10PC | 1 | |
| A1310LHB | 7PC ALUM SEAL AND BEARING SET | 1 | |
| A1310LHSB | 7PC STEEL SEAL AND BEARING SET | 1 | |
| A1310SB | BEARING AND SEAL DRVR ST 10PC | 1 | |
| A20002-40 | D - Ring | 1 | |
| A250-950 | DESOLDERING TOOL | 1 | |
| A25021-1 | PUSH PLATE - SPRING LOADED PDU | 1 | |
| A25021-1-M | PUSH PLATE -0 SPRING LOADED | 1 | |
| A27028-11 | CHECKING FIXTURE - LOAD LIMITER SPRING, AILERON CONTROL | 3 | |
| A27029-28 | REMOVAL/INSTALLATION FIXTURE - LOAD LIMITER AILERON CONTROL SPRING | 1 | |
| A27040-18 | CHECK EQUIPMENT - BEARING WIDTH | 2 | |
| A27041-161 | Test Eqpt-Elevator Feel And Centering Unit | 1 | |
| A27041-175 | Test Equipment - Elevator Feel and Centering Unit | 2 | |
| A27041-176 | TEST EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | 1 | |
| A27041-177 | TEST EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | 1 | |
| A27041-188 | Test Equipment - Elevator Feel and Centering Unit | 1 | |
| A27057-1 | PROTRACTOR BRACKET EQUIPMENT - FEEL CENTERING AND TRIM INSTALLATION, RUDDER CONTROL | 2 | |
| A27057-13 | PROTRACTOR BRACKET EQUIPMENT - FEEL CENTERING AND TRIM INSTALLATION, RUDDER CONTROL | 3 | |
| A27057-9 | PROTRACTOR BRACKET EQUIPMENT - FEEL CENTERING AND TRIM INSTALLATION, RUDDER CONTROL | 1 | |
| A27058-60 | JIG EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | 1 | |
| A27058-61 | Jig Eqpt-Elevator Feel And Centering Unit | 1 | |
| A27070-48 | BEARING INSTALLATION EQUIPMENT - ROTARY BEARING INSTALLATION EQUIPMENT - ROTARY LEADING EDGE SLAT DRIVE | 1 | |
| A27070-61 | BEARING INSTALLATION EQUIPMENT - ROTARY BEARING INSTALLATION EQUIPMENT - ROTARY LEADING EDGE SLAT DRIVE | 1 | |
| A27070-65 | BEARING INSTALLATION EQUIPMENT - ROTARY BEARING INSTALLATION EQUIPMENT - ROTARY LEADING EDGE SLAT DRIVE | 1 | |
| A27070-80 | BEARING INSTALLATION EQUIPMENT - ROTARY BEARING INSTALLATION EQUIPMENT - ROTARY LEADING EDGE SLAT DRIVE | 1 | |
| A27112-2 | OUTBD CENTERING ASSY | 2 | |
| A27112-3 | Inbd Centering Assy | 2 | |
| A27112-7 | OUTBD CENTERING TOOL | 1 | |
| A27112-8 | INBD CENTERING TOOL | 1 | |
| A27122-1 | WRENCH EQUIPMENT - BEARING RETAINING NUT, INBOARD FLAP LINKAGE | 4 | |
| A27127-31 | SPRING DIAL ASSY | 1 | |
| A27127-32 | SPRING DIAL ASSY | 1 | |
| A292514 | HEAD/MAIN BEARING REPLACEMENT RAM TOOL NO. A292514 REPLACEMENT HOSE FOR A292539 HYDRAULIC PUMP KIT | 1 | |
| A292696A | CONNECTING ROOD BEARING TOOL | 1 | |
| A310-21-27-00-0361 | PRESSURE MEASURING DEVICE | 1 | |
| A310-27-00-00-0284 | SOCKET WRENCH-FWD BEARING, FLAP TRACK 2 | 1 | |
| A310-57-001 | SHORING CRADLE BASIS | 1 | |
| A32002-1 | SPRING EXTENDER | 1 | |
| A32002-14 | SPRING EXTENDER - DRAG STRUT, MAIN LANDING GEAR (MLG) | 4 | |
| A32002-2 | SPRING EXTENDER | 1 | |
| A32003 | SPRING COMPRESSOR – SIDE STRUT, MLG | 1 | |
| A32003-1 | SPRING COMPRESSOR - SIDE STRUT, MAIN LANDING GEAR (MLG) | 12 | |
| A32005-54 | REPLACEMENT EQUIPMENT - SEAL, LOWER BEARING, MAIN LANDING GEAR (MLG) | 10 | |
| A32005-74 | REPLACEMENT EQUIPMENT - SEAL, LOWER BEARING, MAIN LANDING GEAR (MLG) | 10 | |
| A32018-1 | SPRING EXTENDER - LOCK LINK, NOSE LANDING GEAR | 1 | |
| A32034 | WRENCH ADAPTER STEERING NUT NLG | 1 | |
| A32034-1 | WRENCH ADAPTER - STEERING NUT, NOSE LANDING GEAR (NLG) | 8 | |
| A32035-1 | WRENCH - STEERING ACTUATOR, NOSE LANDING GEAR (NLG) | 17 | |
| A32042-1 | FIXTURE - FUNCTIONAL TEST, SIDE STRUT SPRING ASSEMBLY | 1 | |
| A32045-34 | B767 FWD TRUNN/BEARING WRENCH TOOL | 11 | |
| A32045-48 | WRENCH - SPANNER, OUTBOARD NUT - BEARING RETAINER PIVOT FITTING | 6 | |
| A32045-85 | STEERING NUT ADAPTOR WRENCH TOOL | 9 | |
| A32045-93 | WRENCHES - SPANNER, NLG STEERING NUT, 3/4 INCH DRIVE | 9 | |
| A32047-39 | TOOL, RING ADAPTER | 1 | |
| A32047-40 | TOOL, RING ADAPTER | 1 | |
| A32047-6 | ADAPTER -0 RETAINER RING | 1 | |
| A32047-7 | ADAPTER -0 RETAINER RING | 1 | |
| A32051 | MLG INNER CYLINDER METERING POINT TOOL | 1 | |
| A32052-1 | TEST FITTING - ACTUATOR, NOSE LANDING GEAR (NLG) STEERING | 3 | |
| A32053-1 | SPANNER WRENCH - RETAINING NUT, STEERING ACTUATOR, NOSE LANDING GEAR (NLG) | 1 | |
| A32061-1 | BACKLASH CHECK EQUIPMENT - NOSE LANDING GEAR (NLG) STEERING GEARBOX | 1 | |
| A32071-1 | COMPRESSION TOOL - SPRING CARTRIDGE NOSE WHEEL STEERING | 2 | |
| A32071-28 | COMPRESSION TOOL - SPRING CARTRIDGE NOSE WHEEL STEERING | 1 | |
| A32071-29 | COMPRESSION TOOL - SPRING CARTRIDGE NOSE WHEEL STEERING | 1 | |
| A32072-1 | FIXTURE - FUNCTIONAL TEST, NOSE LANDING GEAR STEERING ACTUATOR | 1 | |
| A32095-1 | WRENCH - BEARING RETAINING BOLT, MAIN LANDING GEAR (MLG) | 12 | |
| A32099 | SPRING EXTENDER EQPT | 1 | |
| A32099- 158 | SPRING EXTENDER | 3 | |
| A32099-1 | DOWNLOCK SPRING EXTENDER, MLG/NLG | 1 | |
| A32099-111 | SPRING EXTENDER EQUIPMENT | 3 | |
| A32099-112 | SPRING EXTENDER EQUIPMENT | 9 | |
| A32099-112 | SPRING EXTENDER | 9 | |
| A32099-112 (T321107) | 767 Spring Extender Equipment | 1 | |
| A32099-158 | EXTENDER - SPRING | 3 | |
| A32099-25 | SPRING EXTENDER EQPT | 1 | |
| A32099-38 | Spring Extender Eqpt | 2 | |
| A32099-38 | SPRING EXTENDER EQUIPMENT | 2 | |
| A32099-38-M | SPRING EXTENDER | 1 | |
| A32099-69 | EQUIP SPRING EXTENDE | 1 | |
| A32099-76 | SPRING EXTENDER EQUIPMENT | 7 | |
| A32099-77 | A32099-69 SPRING EXTENDER (SUPERSEDED BY -77) | 2 | |
| A32099-78 | SPRING EXTENDER EQUIPMENT | 7 | |
| A32107-1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 3 | |
| A330-92250-0003 | POD REAR FAIRING | 1 | |
| A330-92396-0001 | POD REAR FAIRING SUPPORT WEDGE ASSEMBLY | 1 | |
| A330-92606-0001 | PROTECTOR REAR FAIRING POD | 1 | |
| A34001-1 | WARNING EQUIPMENT - AIR TRAFFIC CONTROL (ATC), DISTANCE MEASURING EQUIPMENT (DME), VERY HIGH FREQUENCY (VHF) ANTENNA AND DRAIN MAST | 5 | |
| A34001-4 | WARNING EQUIPMENT - AIR TRAFFIC CONTROL (ATC), DISTANCE MEASURING EQUIPMENT (DME), VERY HIGH FREQUENCY (VHF) ANTENNA AND DRAIN MAST | 12 | |
| A34009-29 | TEST BOX - REAR MODULE AND CONTROL PANEL, VERY HIGH FREQUENCY OMNIRANGE/DISTANCE MEASURING EQUIPMENT (VOR/DME) | 1 | |
| A34010-21 | TEST BOX - FRONT MODULE, VERY HIGH FREQUENCY OMNIRANGE/DISTANCE MEASURING EQUIPMENT (VOR/DME) | 1 | |
| A34012-24 | ANGULAR DISPL. MEASURING | 11 | |
| A35001-13 | EQUIPMENT - FIRING PIN RETRACTION, BE AEROSPACE AND AVOX OXYGEN GENERATORS | 8 | |
| A365-500 | PADDED SLEEVES FOR TAIL TIP CAP & VERTICAL FINS DURING TRANSPORT (set of 3) | 1 | |
| A439 | SPLIT RINGS - NICKEL PLATED STEEL SPLIT RING ID 25.00, | 1 | |
| A52009-1 | TEST FIXTURE - BUNGEE SPRING, CARGO DOOR | 1 | |
| A52009-22 | TEST FIXTURE - BUNGEE SPRING, CARGO DOOR | 2 | |
| A52010-49 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 2 | |
| A52010-50 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 3 | |
| A52010-51 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 8 | |
| A52010-72 | Clamp equipment-spring instl/removal，bulk cargo door | 1 | |
| A52010-73 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 1 | |
| A52010-74 | CLAMP EQUIPMENT - SPRING INSTALLATION/REMOVAL, BULK CARGO DOOR | 1 | |
| A52020-1 | MANDREL EQUIPMENT - BEARING INSTALLATION | 1 | |
| A52029-1 | CARGO DOOR BUNGEE SPRING TEST FIXT. | 3 | |
| A54110771 | Bearing/swaging & proof load test | 1 | |
| A55007-1 | REMOVAL / INSTALLATION EQUIPMENT - PIVOT BEARING, HORIZONTAL STABILIZER (LINE NUMBER 243 AND ON) | 6 | |
| A667982 | LOOSEN AND TIGHTEN THE THREADED RING | 1 | |
| A685064 | MEASURING-EQUIPMENT, SEMIFUID | 4 | |
| A71036-1 | MONITORING ASSEMBLY - BREATHER PRESSURE, JT9D-7R4 ENGINE | 1 | |
| A78010-1 | CHECK FIXTURE - SPRING INTERLOCK BELLCRANK, JT9D | 1 | |
| A78013-17 | Dee Ring | 1 | |
| A78021-3 | ROD - SPRING COMPRESSOR (A78021-3 INCLUDED IN A78021-45 AND A78021-46) | 1 | |
| A97133 | CONE - GUIDE, STEERING ACTUATOR PIN, NLG | 1 | |
| A97153 | PIN -GUIDE, STEERING ACTUATOR | 1 | |
| A97191 | EQUIPED BEDONG RING | 1 | |
| AA292579 | SPRING COMPRESSOR TOOL NO. AA292579 FOUR (4) REPLACEMENT HOSES FOR CYLINDER HEAD HYDRAULIC MOUNTING FIXTURE AA293268 | 1 | |
| AA295135 | MAIN BEARING CAP LIFTING DEVICE | 1 | |
| AB32001-D5L | SOCKET-RINGFOR NUT OF FWD PINTLE BEARING | 1 | |
| AB32001-ST8 | SPRING EXPANDER-MLG SIDE STAY | 1 | |
| AB55001-VY9 | DEVICE - FREEPLAY, RUDDER BEARING | 1 | |
| AB72001-N9H | HAMMER, SLIDING-INLET CONE FAIRINGTBU: AB72001-N9I | 1 | |
| ABG 10 | BEARING STRUT DRAG | 1 | |
| AC116L | AC116L;MAP-Series OPM adaptor 2.5 mm ferrule with LC centering non-locking | 1 | |
| AC14649P05 | BOROSCOPE MOTORING ADAPT | 1 | |
| AC21886010 | TOOL FOR REMOVAL OF THE INNER AND OUTER WHEEL HALF BEARING CUP. (VFAJX6) | 3 | |
| AC21888000 | TOOL FOR REMOVAL AND INSTALLATION OF THE INNER AND OUTER WHEEL HALF BEARING CUP | 3 | |
| AC21888000-1 | TOOL FOR REMOVAL AND INSTALLATION OF THE INNER AND OUTER WHEEL HALF BEARING CUPS. (VFAJX6) | 2 | |
| AC21892000 | TOOL FOR BEARING CUP REMOVALL FROM THE INNER AND OUTER WHEEL HALVES.(VFAJX6) | 6 | |
| AC21894000-1 | TOOL FOR BEARING CUP INSTALLATION INTO THE INNER AND OUTER WHEEL HALVES. (VFAJX6) | 2 | |
| ACAH0810 | RING SPANNER D/E- 3 - 5/16 X 3/8 | 1 | |
| ACAH1214* | RING SPANNER D/E- 1 - 3/8 X 7/16 | 1 | |
| ACAH1618* | RING SPANNER D/E- 2 - 1/2 X 9/16 | 1 | |
| ACS76049 | DISC SPRING DAMPER RIGGING TOOL | 4 | |
| ADP-00332 | Bearing bolt torque adapter | 1 | |
| ADS12A | GEDORE 010160 ADS12A - DIAL MEASURING TORQUE WRENC | 1 | |
| ADS12D | GEDORE 010140 ADS12D - DIAL MEASURING TORQUE WRENC | 1 | |
| ADS25F | GEDORE 010200 ADS25F - DIAL MEASURING TORQUE WRENC | 1 | |
| ADS25S | GEDORE 010188 ADS25S - DIAL MEASURING TORQUE WRENC | 1 | |
| ADS40F | GEDORE 010240 ADS40F - DIAL MEASURING TORQUE WRENC | 1 | |
| ADS40S | GEDORE 010228 ADS40S - DIAL MEASURING TORQUE WRENC | 1 | |
| ADT120 | ALPES DEIS WIRING GUN | 1 | |
| ADT50 | ALPES DEIS WIRING GUN | 1 | |
| ADTB-1 | FLARING MACHINE-TAP BENDING/RI_[ADTB-1] | 2 | |
| AEM444 | HAR DAV SPRINGER FORK TOOL | 1 | |
| AEM447 | HAR DAV WHEEL BEARING PLUG KIT | 1 | |
| AETL34393 | DUMMY BEARING PLATE | 1 | |
| AETL35118 | CLUTCH BEARING INSERTION TOOL (MOTOR END) | 1 | |
| AF- 4120 | LOW FREQUENCY RING PROBE, 10KHZ-100KHZ, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. USED WITH REFERENCE STANDARD: NDT1102-100 TI | 1 | |
| AF- 4170 | LOW FREQUENCY REFLECTION RING PROBE, .285" ID X .640" 0D TRIAX FISCHER CONNECTOR 500HZ-5KHZ. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AF- 4206 | LOW FREQUENCY REFLECTION RING PROBE, 450HZ-2KHZ, ID 0.415", OD 0.760" (MAX). 1.10" MAX HEIGHT. TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AF-1525/10K | LOW FREQUENCY SPRING LOADED PROBE, REFLECTION .500"Ø DIA. 5-50KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4001 | LOW FREQUENCY RING PROBE, ABS BRIDGE, .380"Ø ID 1.00"Ø OD, 100Hz-1KHz SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4004 | LOW FREQUENCY REFLECTION RING PROBE, .870"Ø OD x .310"Ø ID 1-100KHz WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Confromance. | 1 | |
| AF-4006 | LOW FREQUENCY REFLECTION RING PROBE .840"Ø ID 1.205Ø " OD WITH A TRIAX FISCHER CONNECTOR, 900Hz-5KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4014 | SPRING LOADED REFLECTION LOW FREQUENCY PROBE .340" DIA 5-50KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4015-2.5L/20K | LOW FREQUENCY SPRING LOADED SPOT PROBE, 20KHz, DIFFERENTIAL 2.5" LONG. TRIAX FISCHER C0NNECTOR . Includes test report. | 1 | |
| AF-4015-2.5L/2K | LOW FREQUENCY SPRING LOADED SPOT PROBE, 2KHz, DIFFERENTIAL 2.5" LONG. TRIAX FISCHER C0NNECTOR . Includes test report. | 1 | |
| AF-4015-3L/20K | LOW FREQUENCY SPRING LOADED SPOT PROBE, 20KHz, DIFFERENTIAL 3.0" LONG. TRIAX FISCHER C0NNECTOR . Includes test report. | 1 | |
| AF-4015-3L/25K | LOW FREQUENCY SPRING LOADED SPOT PROBE, DIFFERENTIAL, 25KHz, 3.0" LONG. TRIAX FISCHER C0NNECTOR . Includes test report. | 1 | |
| AF-4022 | LOW FREQUENCY DIFFERENTIAL RING PROBE, 0.300"Ø I.D., 0.700"Ø O.D., 500Hz - 5KHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4022/4F | LOW FREQUENCY DIFFERENTIAL RING PROBE, 0.300"Ø I.D., 0.700"Ø O.D., 500Hz - 5KHz, 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4023 | LOW FREQUENCY RING PROBE, REFLECTION, 100Hz-350Hz, .750"Ø ID, 1.30"Ø OD, MAX HEIGHT .900"H, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4032-3 | LOW FREQUENCY REFLECTION RING PROBE, 150HZ-1KHz. (.600" ID) x (1.0" OD) x (1.25" H) TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| AF-4034 | LOW FREQUENCY REFLECTION RING PROBE, .500"Ø ID x 1.0"Ø OD x .1.175"H. FREQUENCY RANGE: 100Hz-10KHz, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4035 | LOW FREQUENCY REFLECTION RING PROBE .540" ID 1.0" OD 100HZ-10KHZ, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4036 | LOW FREQUENCY REFLECTION RING PROBE, 200Hz-10KHz SUPPLIED WITH TRIAX FISCHER CONNECTOR. .930"Ø O.D. x .305"Ø I.D. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4037 | LOW FREQUENCY RING PROBE .250"IDX.650" OD REFLECTION TRIAX FISCHER CONNECTOR 500HZ-10KHZ Includes Test Report and Certificate of Conformance | 1 | |
| AF-4038 | LOW FREQUENCY REFLECTION RING PROBE .866"( 22MM ) I.D. 1.250"( 31.7MM ) O.D. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FREQUENCY RANGE: 100Hz-900Hz. . Includes test report and Certificate of Conformance. | 1 | |
| AF-4040 | LOW FREQUENCY REFLECTION RING PROBE 200Hz- 2KHz, .500"Ø ID x 1.00"Ø DIA OD x 1.160" H, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4042 | LOW FREQUENCY DIFFERENTIAL RING PROBE, 500Hz-5KHz, .780"Ø OD x .305"Ø ID SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4042/4F | LOW FREQUENCY DIFFERENTIAL RING PROBE, 500Hz-5KHz, .780"Ø OD x .305"Ø ID SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4049/2K | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-10KHz, .250" Ø ID, .650"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4050 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-20KHz, .700"Ø O.D. x .350"Ø I.D., 1.050" HIGH x 1.650" LONG SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4060 | LOW FREQUENCY REFLECTION RING PROBE, .555ID, .840OD, 1.3"H, 400HZ-5KHZ Includes Test Report and Certificate of Conformance | 1 | |
| AF-4062/8M-23M | LF REFLECTION RING PROBE 8..0MM IDX23.0MM OD 30HZ-5KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4065 | LOW FREQUENCY REFLECTION RING PROBE, TRIAX FISCHER CONNECTOR, 50-500HZ, .600" INSIDE DIAMETER, 1.550" OUTSIDE DIAMETER. B777-200/300 57-20-01 PART 6 PAGE 2. Includes Test Report and Certificate of Conformance... | 1 | |
| AF-4067 | LOW FREQYENCY REFLECTION RING PROBE,500HZ-20KHZ, .365"Ø I.D., .700"Ø O.D. WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4068/16L | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz, 16 PIN LEMO CABLE ATTACHED 6 FT LONG | 1 | |
| AF-4076 | LOW FREQUENCY REFLECTION RING PROBE 1-5KHZ ID.42"Ø, OD.75"Ø x .500"H Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4079 | LOW FREQUENCY RING PROBE 800HZ, .33ID, .54OD Includes Test Report and Certificate of Conformance | 1 | |
| AF-4081 | UNIBODY LOW FREQUENCY REFLECTION RING PROBE 500Hz-5KHz, .400"Ø ID, .670"Ø OD WITH TRIAX FISCHER CONNECTOR. REFERENCE: 737 PART 6 55-10-64. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4081/4F | UNIBODY LOW FREQUENCY REFLECTION RING PROBE 500Hz-5KHz, .400"Ø ID, .670"Ø OD, SUPPLIED WITH A 4 PIN LEMO CONNECTOR. REFERENCE: 737 PART 6 55-10-64. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4083 | LOW FREQUENCY REFLECTION RING PROBE, 300-500HZ ID.850 OD1.4, 1.70H Triax Fischer Connector, Includes Test Report and Certificate of Conformance | 1 | |
| AF-4084 | LOW FREQUENCY REFLECTION RING PROBE, 800HZ-10KHZ, .320"Ø ID,.600"Ø OD x .700"H, WITH TRIAX FISCHER CONNECTOR. REFERENCE: 767 PART 6 53-10-22, NDT6075 REFERENCE STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4091 | LOW FREQUENCY RING PROBE, 500Hz-5KHz, REFLECTION, .900" OD, .496" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4092 | LOW FREQUENCT RING PROBE, 500Hz-3KHz. REFLECTION, 1.00" OD, .510" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4094 | LOW FREQUENCY RING PROBE, REFLECTION, 150HZ-1KHZ, 1.0"Ø O.D. x .595"Ø I.D. x 1.50"H, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4095 | LOW FREQUENCY RING PROBE, REFLECTION, 100HZ-10KHZ, .500"Ø ID , 1.25"Ø. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4098 | LOW FREQUENCY REFLECTION RING PROBE ID .788"Ø, OD 1.40"Ø, 300Hz-3KHz SUPPLIED WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4099 | LOW FREQUENCY RING PROBE, REFLECTION, 100HZ-5KHz .425' I.D., .900" O.D. TRIAX FISCHER CONNECTOR. Includes Test Report and COC. | 1 | |
| AF-4101 | LOW FREQUENCT RING PROBE, 1-10KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4102 | LOW FREQUENCT RING PROBE, 50Hz-5KHz. REFLECTION, .700" OD, .350" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT3255 | 1 | |
| AF-4103/TF | LOW FREQUENCY REFLECTION RING PROBE ABSOLUTE SHIELDED, 200Hz-100KHz WITH A TRIAX FISCHER CONNECTOR. DIMENSIONS: 37mm X 13mm X 23mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4104 | LOW FREQUENCY REFLECTION RING PROBE .680"Ø I.D. 1.50"Ø O.D. WITH A TRIAX FISCHER CONNECTOR CONNECTOR 100Hz-2KHz., 737 PT 6 57-30-04. Includes test report and Certificate of Conformance. | 1 | |
| AF-4107 | LOW FREQUENCY REFLECTION RING PROBE 100-500Hz, REFLECTION, .651" ID, .940" OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4108 | LOW FREQUENCY RING PROBE 500Hz-5KHz, REFLECTION, .740" OD, .500" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4109/TI | LOW FREQUENCY REFLECTION RING PROBE, ID .470, OD.900, 3-10KHZ. For reference standard NDT 3259. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4113 | LOW FREQUENCY RING PROBE 100Hz-1KHz, REFLECTION, 1.30" OD, .800" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4114 | LOW FREQUENCY RING PROBE 100Hz-10KHz, REFLECTION, 1.318" OD, .650" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4116 | LOW FREQUENCY RING PROBE 50Hz-5KHz, REFLECTION, 1.060" OD, .580" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4117 | LOW FREQUENCY RING PROBE 100Hz-10KHz, REFLECTION, .700" OD, .187" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4120 | LOW FREQUENCY RING PROBE, 10KHz-100KHz, REFLECTION, .405"ID, .800"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. USED WITH REFERENCE STANDARD: NDT1102-100 Ti | 1 | |
| AF-4123 | LOW FREQUENCY RING PROBE, 100Hz-1KHz, REFLECTION, 1.190" OD, .800" ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4124/300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance. | 1 | |
| AF-4125/100H | CUSTOM REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of Conform... | 1 | |
| AF-4126/500H | LOW FREQUENCY REFLECTION RING PROBE .750"OD, .400"ID 500Hz-2 KHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4127/100H | LOW FREQUENCY REFLECTION RING PROBE 100Hz-5KHz, 1.00"OD, .545"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4131/500H | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, 1.35"Ø O.D.x.850"Ø I.D. WITH A TRIAX FISCHER CONNECTOR USED ON NDT3178G 737 PART 6 57-10-62, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4132 | LOW FREQUENCY REFLECTION RING PROBE 900Hz -5KHz WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4133 | LOW FREQUENCY RING PROBE, 200Hz-1KHz, REFLECTION, .550"ID, 1.00"OD, .700H SUPPLIED WITH A TRIAX FISCHER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4134 | LOW FREQUENCY RING PROBE, 10-100KHz, REFLECTION, 1.600" OD. .860" ID. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4135 | LOW FREQUENCY RING PROBE, 50Hz-3KHz, REFLECTION, .605"ID 1.160"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4138 | LOW FREQUENCY RING PROBE, 1-20KHz, REFLECTION, .700"OD, .300"ID, SUPPLIED WITH A TRIAX CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4139 | LOW FREQUENCY REFLECTION RING PROBE .350"Ø ID x .750"Ø OD, TRIAX FISCHER CONNECTOR 50Hz-4KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4143 | LOW FREQUENCY RING PROBE, 100Hz-10KHz, REFLECTION, 1.00"OD, .500"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4145/.187 | LOW FREQUENCY RING PROBE, 30Hz-50KHz, BRIDGE, .187"ID, .531"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4145/.248 | LOW FREQUENCY RING PROBE, 30Hz-50KHz, BRIDGE, .248"ID, .875"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4145/.315 | LOW FREQUENCY RING PROBE, 30Hz-50KHz, BRIDGE, .315"ID, .906"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4145/.433 | LOW FREQUENCY RING PROBE, 30Hz-50KHz, BRIDGE, .433"ID, 1.093"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4145/.512 | LOW FREQUENCY RING PROBE, 30Hz-50KHz, BRIDGE, .512"ID, 1.125"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4145/.630 | LOW FREQUENCY RING PROBE, 30Hz-50KHz, BRIDGE, .630"ID, 1.500"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4147 | LOW FREQUENCY SPOT PROBE DIFFERENTIAL, SPRING LOADED 300Hz-40KHz, .500" O.D. TRIAX FISCHER CONNECTOR. Includes Test Report and certificate of Conformance. | 1 | |
| AF-4153/TI | LOW FREQUENCY RING PROBE 1-15KHz, REFLECTION, ID.565" OD.910",SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. For Reference Standard NDT 3225. | 1 | |
| AF-4155 | LOW FREQUENCY RING PROBE, 50-250Hz, REFLECTION, 1.30"OD, .880"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4157 | LOW FREQUENCY RING PROBE 200Hz-10KHz, REFLECTION, .880"OD, .505"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4158 | LOW FREQUENCY REFLECTION RING PROBE .500" ID 1.0" OD TRIAX FISCHER CONNECTOR, 80Hz-4KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4159 | LOW FREQUENCT RING PROBE, 200Hz-10KHz< REFLECTION, .750"OD, .400"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4160 | LOW FREQUENCY RELECTION RING PROBE, 200Hz-10KHz, .330" Ø ID .700" ØOD SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| AF-4163/100HZ | LOW FREQUENCY RING PROBE 100Hz-3KHz REFLECTION .750"ID, 1.450"OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR . Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4164 | LOW FREQUENCY RING PROBE 100Hz-3KHz, REFLECTION, .750" ID, 1.400" O.D. x .750" H, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4165 | LOW FREQUENCY RING PROBE, 100Hz-1KHz, REFLECTION, .820"ID 1.310" OD .975" HEIGHT, SUPPLIED WITH A TRIAX FISCHER..CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4169 | LOW FREQUENCT RING PROBE, 800Hz-3KHz, REFLECTION. .700"OD, .275"ID, SUPPLED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4170 | LOW FREQUENCY REFLECTION RING PROBE, .285" ID x .640" 0D TRIAX FISCHER CONNECTOR 500Hz-5KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4171 | LOW FREQUENCY RING PROBE, 900Hz-5KHz, REFLECTION, .900"OD, .455"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4178 | SPRING LOADED LOW FREQUENCY DIFFERENTIAL PROBE, SHIELDED 1-20KHz .375"Ø, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4183 | LOW FREQUENCY RING PROBE 100Hz-8 KHz, .850"Ø(18mm) OD x .400"Ø(7.6mm) ID x., WITH TRIAX FISCHER CONNECTOR. . Includes Test Report and Certificate of Conformance. Reference: USED WITH NDT732A, 777 Part 6 55-17-03 | 1 | |
| AF-4189 | LOW FREQUENCY BRIDGE / DIFFERENTIAL RING PROBE .800"Ø I.D. 1.250"Ø O.D. TRIAX CONNECTOR 100Hz-1KHz. Includes Test Report and Certificate of Conformance. LR0112-B3 | 1 | |
| AF-4190 | LOW FREQUENCY BRIDGE / DIFFERENTIAL RING PROBE .75"Ø I.D. 1.40"Ø O.D. TRIAX CONNECTOR 100Hz-1KHz. Includes test report and Certificate of Conformance. NORTC SPO-1238 (9203394). | 1 | |
| AF-4196/DIFF | DIFFERENTIAL/BRIDGE RING PROBE .750"Ø OD .400"Ø OD, .980" HIGH, TRIAX FISCHER CONNECTOR, 100Hz-1KHz.. Includes test report and Certificate of Conformance. | 1 | |
| AF-4197 | LOW FREQUENCY RING PROBE, 3-15KHz, REFLECTION, .555"OD, .255"ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4199 | LOW FREQUENCY RING PROBE. DIFFERENTIAL/BRIDGE. .650"Ø OD .1.060"Ø OD, TRIAX FISCHER CONNECTOR, 80-800Hz.. Includes test report and Certificate of Conformance. | 1 | |
| AF-4202 | LOW FREQUENCY REFLECTION RING PROBE, 500HZ-5KHZ, ID 0.325", OD 0.790" (MAX). 1.05" HEIGHT. TRIAX FISCHER CONNECTOR. USED WITH NDT6097 REFERENCE STANDARD Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4203 | LOW FREQUENCY REFLECTION RING PROBE, 900HZ-5KHZ, ID 0.300", OD 0.800" (MAX). 1.170" HEIGHT. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4205 | LOW FREQUENCY REFLECTION RING PROBE, 50HZ-3KHZ, ID 0.500"(12.7mm)Ø, OD 0.690" (17.5mm)Ø. OVERALL HEIGHT = 1.56"(39.5mm) x OVERALL DIAMETER = .787"(20mm) Ø, WITH A TRIAX FISCHER CONNECTOR.Supplie with probe guide Figure 6 27-1-6023. Includes Test Report | 1 | |
| AF-4206 | LOW FREQUENCY REFLECTION RING PROBE, 450HZ-2KHZ, ID 0.415", OD 0.760" (MAX). 1.10" MAX HEIGHT. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4209 | LOW FREQUENCY REFLECTION RING PROBE 1.40"Ø OD, .800"Ø ID, 100HZ-500HZ, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4217 | LOW FREQUENCY DIFFERENTIAL RING PROBE, 0.330"Ø I.D., 0.830"Ø O.D., 100Hz - 1KHz, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4219 | LOW FREQUENCY REFLECTION RING PROBE .420"Ø ID, 1.0"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR 200Hz-10KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4220 | LOW FREQUENCY REFLECTION RING PROBE .312"Ø ID, .790"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR 100Hz-5KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4223 | LOW FREQUENCY REFLECTION RING PROBE .400"Ø ID x .800"Ø OD, TRIAX FISCHER CONNECTOR 50Hz-3KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4224 | LOW FREQUENCY REFLECTION RING PROBE .400"Ø ID x .700"Ø OD, TRIAX FISCHER CONNECTOR 200Hz-15KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4226 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, .610"Ø ID 1.100"Ø OD SUPPLIED WITH A TRIAX FISCHER / LEMO CONNECTOR. FREQUENCY RANGE: 100Hz-1KHz. IncludesTest Report and Certificate of Conformance. | 1 | |
| AF-4227 | LOW FREQUENCY REFLECTION RING PROBE 0.80"Ø I.D. 1.40"Ø O.D., TRIAX FISCHER CONNECTOR 100Hz-1KHz. . Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4229 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, .410"Ø ID 1.0"Ø OD SUPPLIED WITH A TRIAX FISCHER / LEMO CONNECTOR. FREQUENCY RANGE: 100Hz-1KHz. IncludesTest Report and Certificate of Conformance. | 1 | |
| AF-4235 | LOW FREQUENCY REFLECTION RING PROBE, . 80Hz-50kHz. ID .630", OD 1.42", WITH A HEIGHT 1.30”. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4239 | LOW FREQUENCY REFLECTION RING PROBE, .750"Ø OD x .400"Ø ID, 1.300" HIGH, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FREQUENCY RANGE: 100Hz-10KHz.. Includes test report and Certificate of Conformance. | 1 | |
| AF-4246 | LOW FREQUENCY BRIDGE / DIFFERENTIAL RING PROBE .505"Ø I.D. 1.200"Ø O.D. TRIAX CONNECTOR 50Hz-300Hz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4247 | LOW FREQUENCY BRIDGE / DIFFERENTIAL RING PROBE .800"Ø I.D. 1.400"Ø O.D. TRIAX CONNECTOR 100Hz-1KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4292 | LOW FREQUENCY REFLECTION RING PROBE, 50Hz-3KHz,. .530"Ø ID, 1.100"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR.. Includes test report and Certificate of Conformance. | 1 | |
| AF-4293 | LOW FREQUENCY REFLECTION RING PROBE, 50Hz-3KHz,. .560"Ø ID, 1.25"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4294 | LOW FREQUENCY RING PROBE. DIFFERENTIAL/BRIDGE, 100Hz-1KHz,. .800"Ø ID, 1.200"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR.. Includes test report and Certificate of Conformance. | 1 | |
| AF-4303 | LOW FREQUENCY REFLECTION RING PROBE, .400"Ø ID with a .650"Ø OD, 500Hz-2KHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4304 | LOW FREQUENCY REFLECTION RING PROBE, .350"Ø ID with a .550"Ø OD, 500Hz-2KHz, Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4305 | LOW FREQUENCY REFLECTION RING PROBE, FREQUENCY RANGE 100Hz-5KHz, 1.35" O.D.x.850"I.D. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4311 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-7KHz .450"Ø ID .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4312 | LOW FREQUENCY REFLECTION RING PROBE, 2KHz-7KHz .450"Ø ID .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4313 | LOW FREQUENCY REFLECTION RING PROBE, 50Hz-3KHz .50"Ø ID 1.0"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4314 | LOW FREQUENCY REFLECTION RING PROBE, 5KHz-80KHz .30"Ø ID .60"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4315 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-10KHz .425"Ø ID .750"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4319 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-10KHz 11.3mmØ ID 20.3mmØ OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4321 | LOW FREQUENCY REFLECTION RING PROBE, 1KHz -20KHz, .450"Ø ID .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AF-4322 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-5KHz .550" I.D. 1.0" O.D. 1.200"H TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance.....Note: Used with NDT7033 | 1 | |
| AF-4324 | LOW FREQUENCY RING PROBE, REFLECTION, 100Hz-10KHz .300"Ø ID x .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4326 | LOW FREQUENCY REFLECTION RING PROBE 200Hz-10KHz, 1.0"Ø OD, .500"Ø ID WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-4334 | Low Frequency Reflection Ring Probe, 40Hz-500Hz. 1.3"Ø I.D. 2.0"Ø O.D., supplied with a Triax Fischer Connector. REFERENCE STANDARD: NDT7035. Includes test report and Certificate of Conformance. | 1 | |
| AF-4335 | LOW FREQUENCY REFLECTION RING PROBE, 300Hz-1KHz .425"Ø ID SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance.....USED WITH 717-200 REFERENCE STANDARD P/N: 717RS10-C | 1 | |
| AF-4336 | LOW FREQUENCY REFLECTION RING PROBE, 50KHz-500KHz .250"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-4337 | LOW FREQUENCY REFLECTION RING PROBE .875"ø I.D. 1.250"ø O.D. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FREQUENCY RANGE: 100Hz-900Hz. . Includes test report and Certificate of Conformance. | 1 | |
| AF-5002.460/.675/TI | HIGH FREQUENCY RING PROBE 1.1 HEIGHT TI 500K - 1MHZ DIFF, SHIELD, ABS COIL | 1 | |
| AF-5002.755/.530/TI | HIGH FREQUENCY RING PROBE 1.1 HEIGHT TI 500K - 1MHZ DIFF, SHIELD, ABS COIL | 1 | |
| AF-5005 | HIGH FREQUENCY SPRING LOADED EDDY CURRENT SURFACE SPOT PROBE, REFLECTION 50-500KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5017 | HIGH FREQUENCY SURFACE SCAN EDDY CURRENT PROBE, SPRING LOADED | 1 | |
| AF-5018 | HIGH FREQUENCY I.D. SCAN EDDY CURRENT PROBE, SPRING LOADED | 1 | |
| AF-5029/.875 | HIGH FREQUENCY ROTARY PROBE 25-500KHz, REFLECTION, .875"OD, 5.00" WOKRING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5044 | HIGH FREQUENCY RING PROBE 5-30KHz, ABS REFLECTION, 2 COILS, .850" HEIGHT, .700"OD, .260"ID, SUPPLIED WITH A TRIAX FISCHER. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5046 | HIGH FREQUENCY RING PROBE 10-100KHz, DIFFERENTIAL, .800"OD, .330"ID, 1.0" HEIGHT, 4 COILS, DELRIN HOUSING, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5048G | NDT ENGINEERING CORP. NEC-1062 PROBE GUIDE. Includes Certificate of Conformance. | 1 | |
| AF-5104 | SPECIAL SPRING LOADED SURFACE PROBE, ABSOLUTE COIL 1-3MHz WITH MICRODOT CONNECTOR. PER AIRBUS SPECIFICATION A318/A319/A320/A321 57-20-40-991-002-A. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5254 | Custom Nortec / Pratt & Whittney Eddy Current Probe, 2MHz, Dual "D'" Coil, .2.50mm, 5.6 UH Matching Inductance, Spring Loaded Tip, Differential / Bridge, Match phase angle and frequency as close as possible. Supplied with a Triax Fischer connector. | 1 | |
| AF-5300-.125SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .125"Ø-.156"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.156SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .156"Ø-.187"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.187SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .187"Ø-.250"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.250SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .250"Ø-.312"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.312SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .312"Ø-.375"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.375SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .375"Ø-.437"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.437SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .437"Ø-.500"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF100238 | SPRING CLAMP PLYERS WITH BOWDEN CABLE | 1 | |
| AFC-5006 | CUSTOM 767 PART 4 57-50-05 10MHZ SPRING LOADED LONGITUDINAL WAVE TRANSDUCER. (TEK-5006) | 1 | |
| AFC-525-7SS | NDT ENGINEERING CORP. / OLYMPUS NDT 5MHz LONGITUDINAL(STRAIGHT BEAM) TRANSDUCER, .25"Ø ELEMENT, .375"Ø CASE, .700" TALL, SIDE MOUNT MICRODOT CONNECTOR. Includes test Report and Certificate of Conformance. | 1 | |
| AFC-525-7T | NDT ENGINEERING CORP. / OLYMPUS NDT 5MHz LONGITUDINAL(STRAIGHT BEAM) TRANSDUCER, .25"Ø ELEMENT, .375"Ø CASE, .700" TALL, TOP MOUNT MICRODOT CONNECTOR. Includes test Report and Certificate of Conformance. | 1 | |
| AFK-5300SE-7 | CUSTOM EDDY CURRENT FLEXIBLE SPRING SHAFT ROTARY PROBE KIT. .125"Ø to .500"Ø. INCLUDES THE FOLLOWING 7 PROBE PART NUMBERS. AF-5300-.125SE/1T-6L, AF-5300-.156SE/1T-6L, AF-5300-.187SE/1T-6L, AF-5300-.250SE/1T-6L, AF-5300-.312SE/1T-6L, AF-5300-.375SE/1T-6L, | 1 | |
| AFK-AUR9 | Scanner Probe kit, ""SUB"" scanner series:9 probes with standard working lengths. Probes "SUB-8-10, SUB-10-12, SUB-12-14, SUB-14-16, SUB-16-18, SUB-18-20, SUB-20-24, SUB-24-28, SUB-28-32. Includes shipping/ transport kit capable of storing scanner cable a | 1 | |
| AFK-RP09 | Custom Eddy Current Low Frequency Ring Probe Kit to include the following part numbers. ARP-1.40-.85-200H, ARP-1.35-.85-500H, ARP-1.25-.77-300H, ARP-1.0-.5-200H, ARP-.80/.40/200H, AF-4022, AF-4035,AF-4068, AF-4081, . Supplied with a waterproof kit box. I | 1 | |
| AFNDT-2146AL | ALUMINUM CHEM MILL MEASURING STEP WEDGE. MATERIAL: 2024-T3 ANODISED ALUMINUM. STEPS: .024, .028, .031, .035, .039, .044, .048, .052, .056, .059 +/-.002". Includes Test eport and Certificate of Conformance. | 1 | |
| AFNDT-2146S | STEEL CHEM MILL MEASURING STEP WEDGE. MATERIAL: 4340 STEEL CHROME COATED. STEPS: .024, .028, .031, .035, .039, .044, .048, .052, .056, .059 +/-.002". Includes Test eport and Certificate of Conformance. | 1 | |
| AFNDT-3280 | Surface reference standard, 4340 Steel, with EDM notch depths of 0.5mm", 1.0" and 2.0mm +/-1.3mm, Notch Width: .18mm Max. Depth: +/- .03mm. Reference standard overall dImensions 25.4mm X 101.6mm X 6.4mm). Includeds .020" thick shim and Key Ring. Supplie | 1 | |
| AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3347CS | EDDY CURRENT WELD SURFACE REFERENCE STANDARD. EDM NOTCHES: 0.5mm, 1.0mm, 2.0mm (.1mm (.004") WIDE ± .05mm( .002") MAX WIDTH .152mm (.006"). MATERIAL: 4340 CARBON STEEL. SIZE: 1.0"W x 4.0"L Includeds 4 piece .020" thick shim and Key Ring set. Includes Tes | 1 | |
| AFS-0539 | Custom 5MHz 45 degree shearweave ring transducer which features both right and left scanning directions. Ref. Standard NDT796 | 1 | |
| AFS-0540 | CUSTOM SPRING LOADED TRANSDUCER WITH COLLAR FOR C-130 FUSELAGE SP-78 INSPECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1346 | CUSTOM 2 ELEMENT RING TRANSDUCER FOR BORE HOLE INSPECTION WITH BOEING REFERENCE STANDARD 55-10-13 PAGE 9 FIGURE 2. TWO MICRODOT CONNECTORS "A" and "B" | 1 | |
| AFS-502 | SPECIAL RING TRANSDUCER USED ON 787-9-HS-9, NOTCH "C" & 787-9-HS-2 NOTCH "A" | 1 | |
| AGE-00343-801 | Kit. Backlash Measuring Rudder | 1 | |
| AGE-00387-401 | protractor to measure the rudder and spring deflection | 9 | |
| AGE-01097-401 | TR BEARING HOLDER | 1 | |
| AGE-01159-401 | PLATE - STEERING ADJUSTMENT | 6 | |
| AGE-01159401 | PLATE-STEERING ADJUSTMENT | 6 | |
| AGE-01258-401 | PANTOGRAPHIC DOLLY, INSTL / RMV - WING-TO-FUSELAGE FAIRING | 3 | |
| AGE-01410-401 | FIXING DEVICE - MEASURING CLEARANCE, HELM | 8 | |
| AGE-01629-403 | BACKLASH MEASURING DEVICE | 3 | |
| AGE-02360-001 | ECCENTRIC SPHERICAL BEARING ADJUSTMENT DEVICE | 4 | |
| AGE-02777-401 | DEVICE, INSTL/RMV-GAS SPRING | 1 | |
| AGE-03390-401 | ADAPTER AND LEAK TEST MFG: KLM UK ENGINEERING | 3 | |
| AGE-03951-401 | PLUG LEAKAGE (APPLICABLE WHEN REAR FAIRING IS INSTALLED) | 2 | |
| AGE-10024 | DRIVER, BEARING | 3 | |
| AGE-10034 | DRIVER, BEARING | 2 | |
| AGE-10049 | DRIVER, BEARING ASSEMBLY | 2 | |
| AGE-10065 | DRIVER, BEARING | 2 | |
| AGE-10377 | DRIVER, BEARING | 3 | |
| AGE-10773 | DRIVER, BEARING | 2 | |
| AGE-11961 | DRIVER, BEARING | 3 | |
| AGE-13234 | DRIVER, JOURNAL BEARING | 3 | |
| AGE01159-401 | PLATE - STEERING ADJUSTMENT | 6 | |
| AGE10024 | DRIVER, BEARING | 3 | |
| AGE10024 | BEARING DRIVER (2IT) | 3 | |
| AGE10034 | Bearing Driver | 2 | |
| AGE10035 | Bearing Driver | 2 | |
| AGE10049 | Bearing Assembly Driver | 2 | |
| AGE10064 | LOBE RING DRIVER | 2 | |
| AGE10065 | Bearing Driver | 2 | |
| AGE10067 | BEARING DRIVER | 1 | |
| AGE10072 | Retaining Ring Driver | 1 | |
| AGE10168 | BEARING DRIVER | 1 | |
| AGE10168 (DMS-37186) | Bearing Driver | 1 | |
| AGE10359 | BEARING RACE DRIVER | 4 | |
| AGE10377 | BEARING DRIVER | 3 | |
| AGE10378 | Bearing Driver | 2 | |
| AGE10398 | RETAINING RING DRIVER | 2 | |
| AGE10773 | BEARING DRIVER | 2 | |
| AGE10773PM | BEARING DRIVER | 1 | |
| AGE10941 | INPUT BEARING DRIVER | 1 | |
| AGE11187 | BEARING DRIVER | 2 | |
| AGE11254 | BEARING DRIVER | 1 | |
| AGE11405 | DRIVER BEARING | 1 | |
| AGE11574 | BEARING DRIVER | 1 | |
| AGE11645 | BEARING DRIVER | 2 | |
| AGE11646 | Bearing Driver | 2 | |
| AGE11841 | DRIVER BEARING | 3 | |
| AGE11842 | BEARING DRIVER | 3 | |
| AGE11842 | BEARING DRIVER OUTILLAGE IDG NG | 3 | |
| AGE11849 | BEARING DRIVER | 2 | |
| AGE11942 | DELETE - Wiring Harness | 2 | |
| AGE11961 | BEARING DRIVER | 3 | |
| AGE12169 | DIRVER BEARING | 1 | |
| AGE12772 | DRIVER, BEARING | 1 | |
| AGE13171 | SEAL WEAR RING DRIVER | 2 | |
| AGE13172 | SEAL WEAR RING DRIVER | 2 | |
| AGE13179 | SEAL WEAR RING DRIVER | 1 | |
| AGE13234 | JOURNAL BEARING DRIVER | 3 | |
| AGE13246 | BEARING RACE DRIVER | 2 | |
| AGE13250 | JOURNAL BEARING DRIVER | 1 | |
| AGE13340 | Bearing Driver | 1 | |
| AGE13552 | BEARING DRIVER | 2 | |
| AGE13813-2 | DRIVER, BEARING | 1 | |
| AGE13836 | DRIVER, SPRING COMPRESSION | 1 | |
| AGE13839 | DRIVER, BEARING | 1 | |
| AGE13840 | DRIVER, BEARING | 1 | |
| AGE13904 | SEAL WEAR RING DRIVER | 1 | |
| AGE13929 | BEARING JOURNAL DRIVER | 1 | |
| AGE13931 | SEAL WEAR RING DRIVER | 1 | |
| AGE13932 | BEARING JOURNAL DRIVER | 1 | |
| AGE14035 | ASSEMBLY, BEARING DRIVER | 2 | |
| AGE14036 | Bearing Driver | 1 | |
| AGE14792 | DRIVER, BEARING | 1 | |
| AGE14903 | DRIVER, RING | 1 | |
| AGE14906 | DRIVER, RING | 1 | |
| AGE15801 | BEARING DRIVER | 1 | |
| AGE15805 | BEARING DRIVER | 1 | |
| AGE15806 | BEARING DRIVER | 1 | |
| AGE15821 | RETAINING RING DIE | 1 | |
| AGE15823 | BEARING DRIVER | 1 | |
| AGE15838 | BEARING DRIVER | 1 | |
| AGE15859 | DRIVER, BEARING | 1 | |
| AGE15868 | DRIVER, BEARING LINER | 1 | |
| AGE15869 | DRIVER, BEARING LINER | 1 | |
| AGE15870 | DRIVER, BEARING LINER | 1 | |
| AGE15871 | DRIVER, BEARING LINER | 1 | |
| AGE15872 | DRIVER, BEARING LINER | 1 | |
| AGE16152 | PRINTED WIRING ASSEMBLY, MEZZANINE-GCU | 1 | |
| AGE16568 | FIXTURE DISASSEMBLY, FEATHERING ASSEMBLY | 1 | |
| AGE17077 | GROUND TEST MOTORING EQUIPMENT - RAM AIR TURBINE | 1 | |
| AGE17077-B | TRONAIR RAT Ground Test Tool, For GTT Pressure Monitoring Box, 5000 psi | 5 | |
| AGE17077A | GROUND TEST MOTORING EQUIPMENT - RAM AIR TURBINE | 1 | |
| AGE17077B | TRONAIR RAT Ground Test Tool, For GTT Pressure Monitoring Box, 5000 psi | 5 | |
| AGE17629 | Driver, Bearing Liner Removal | 1 | |
| AGE17630 | FIXTURE, HOLDING, BEARING LINER REMOVAL | 1 | |
| AGE17633 | FIXTURE, HOLDING, BEARING LINER INSTALL | 1 | |
| AGE17634 | Driver, Bearing Liner Install | 1 | |
| AGE17638 | Fixture, Holding, Bearing Liner Removal | 1 | |
| AGE17639 | Fixture, Holding Bearing Liner Install | 1 | |
| AGE70071 | CENTERING TOOL, FWD FLOATING RING | 1 | |
| AGE70459-23 | RING, SPLIT 0.596 ID | 1 | |
| AGE70459-27 | RING PIN ASSEMBLY WITH TYPE 1 LANYARD, APU CRADLE | 1 | |
| AGE70527 | ROLLER BEARING RACE INSTALLATION AND REMOVAL | 1 | |
| AGE70527-P01 | ROLLER BEARING RACE INSTALLATION AND REMOVAL | 1 | |
| AGE70527-P02 | ROLLER BEARING RACE INSTALLATION AND REMOVAL | 1 | |
| AGE70534 | ROTOR CENTERING AID | 1 | |
| AGEI0034 | DRIVER, BEARING | 1 | |
| AGEI0049 | DRIVER, BEARING ASSEMBLY | 1 | |
| AGEI0065 | DRIVER, BEARING | 1 | |
| AGEI0377 | DRIVER, BEARING | 1 | |
| AGEâ?00343â?401 | RUDDER BACKLASH MEASURING KIT | 9 | |
| AGE‐01159‐401 | Plate-Steering Adjustment | 6 | |
| AGIT0006 | ARCS REMOVAL/INSTALLATION MATING RING LINE IDG | 1 | |
| AGIT0009 | REMOVAL EGB DAMPER BEARINGS | 1 | |
| AGIT0010 | INSTALLATION EGB DAMPER BEARINGS | 1 | |
| AGSE-E10712-P01 | PUMP-MODIFIED TR ENGINEERING P/N 100-6-150 | 1 | |
| AH2001 (LHl15) | Tool, Infrared Heat, GIo-Ring | 1 | |
| AH365-500 | PADDED SLEEVES FOR TAIL TIP CAP & VERTICAL FINS DURING TRANSPORT (set of 3) | 1 | |
| AI-0.125X1.5 | SPRING SLOTTED PIN, 1, P, AI,0.125X1.5 | 1 | |
| AID-00137 | DRIVER FAN BEARING REMOVAL | 1 | |
| AID-00142 | Driver, G/B Bearing, Idler | 1 | |
| AID-00559 | BEARING DRIVER | 1 | |
| AID-00560 | RETAINING RING GUIDE AND DRIVER | 1 | |
| AID-00699 | BEARING INSTALL AID | 1 | |
| AID-00794 | Containment ring handling tool | 1 | |
| AID-00794 | CONTAINMENT RING HANDLING TOO | 1 | |
| AID-00827 | Bearing handling tool (thrust bearing retaining ring) | 1 | |
| AID-00869 | Rotor centering aid | 1 | |
| AID-00874 | Rotor disassembly aid (bearing puller) | 1 | |
| AID-00874 | ROTOR DISASSEMBLY AID (BEARING PULLER) | 1 | |
| AID-01188 | 2ND STAGE PISTON RING | 1 | |
| AID-01432 | MATING RING-EXTRCTION TOOL EXTRACTIONTOOL (POST HAMILTON SUNDSTRAND-SB4503067-49-17) | 2 | |
| AID-CONTOURING | Axial Inside Diameter Contouring option | 1 | |
| AIT320020-001 | TOOL FOR LANDING GEAR DIMENSION MEASURING | 2 | |
| AJD101103-316 | MS BEARING PROOF LOAD TEST KIT | 1 | |
| AKS28601 | Bearing Driver | 1 | |
| AM-1802 | Shoring cradle engine 1 & 2 | 9 | |
| AM-1804 | Shoring load cell engine 1 & 2 | 1 | |
| AM-1928-156 | ENGINE STAND BASE W/CF6-80C2 ENGINE STAND BEARING | 6 | |
| AM-2563-200 | BASE - TRANSPORTATION , CFM56 ENGINE (AIRLINE CONFIGURATION) (ADVANCED GROUND SYSTEMS ENGINEERING CORP (AGSE)) | 9 | |
| AM-2811-2011 | STEERING BAR FOR ENGINE STAND PN AM2563200 SN 2097 | 1 | |
| AM-2811-4800 | CRADLE - TRANSPORT, CFM56-7 ENGINE (ADVANCED GROUND SYSTEMS ENGINEERING CORP (AGSE)) | 9 | |
| AM25174 | BEARING ALIGNMENT MANDREL AND GAP GAUGE | 1 | |
| AM2563-200 | BASE - TRANSPORTATION , CFM56 ENGINE (AIRLINE CONFIGURATION) (ADVANCED GROUND SYSTEMS ENGINEERING CORP (AGSE)) | 9 | |
| AM2811-4800 | CRADLE - TRANSPORT, CFM56-7 ENGINE (ADVANCED GROUND SYSTEMS ENGINEERING CORP (AGSE)) | 9 | |
| AM28463 | BEARING ALIGNMENT MANDREL AND GAP GAUGE | 1 | |
| AM28476 | BEARING ALIGNMENT MANDREL AND GAP GAUGE | 1 | |
| AM29262 | Bearing Alignment mandrel | 2 | |
| AM29274 | Bearing alignement mandrel and gap gage | 1 | |
| AM29342 | "BEARING ALIGNMENT MANDREL | 1 | |
| AM29363 | BEARING ALIGNMENT MANDREL AND GAP GAGE&NBSP; | 1 | |
| AMB12V4012 | BEARING (STANDARD) | 1 | |
| AMB12V4012/020 | BEARING (SECOND OVERSIZE) | 1 | |
| AMB12V4012/030 | BEARING (THIRD OVERSIZE) | 1 | |
| AMI-TW60-WAND | PowerAll Systems PAS-TW60-WAND Pratt & Whitney PT-6 Compressor Wash Ring | 1 | |
| AMM30871 | BOOT AND SPRING ASBLY | 1 | |
| AMM903031 | STUD BORING BAR | 1 | |
| AMT23395SLL | LOCATOR, SPRING LOADED | 1 | |
| AMT23480SLL | LOCATOR, SPRING LOADED (GLENAIR ONLY) | 1 | |
| AO42795 | MANDREL FOR BEARING ASSY | 1 | |
| AOD-CONTOURING | Axial Outside Diameter Contouring option | 1 | |
| APC-1-25W331101 | MAIN ENTRY DOOR AIR SPRING COMPRESSION TOOL | 1 | |
| APO83-479 | BORING BAR HOLDER | 1 | |
| APR-1.0-.60-100H | SHIELDED RING PROBE | 1 | |
| APR-1.35-.85-500H | SHIELDED RING PROBE | 1 | |
| APR-1.40-.85-200H | SHIELDED RING PROBE | 1 | |
| APV5410-00-0 | CRADLE - AFT PYLON FAIRING | 3 | |
| AR024A001 | FIXTURE-SPRING LOAD SETTING | 1 | |
| ARB-00816 | Bearing race installation tool (hydraulic press) | 1 | |
| ARD-350T | 3.50MHZ .500"Ø REPLACEABLE DELAY TRANSDUCER WITH .394" LONG DELAY TIP. Includes DRR202 RETAING RING. Includes Test Report and Certificate of Conformance. | 1 | |
| ARDP.56/1.15 | DIFFERENTIAL RING PROBE 100HZ-1KHZ .560ID 1.15 OD 1.5"H | 1 | |
| ARG7076-5511 | Metering Valve Test / Holding Fixture | 2 | |
| ARP- .80/.40-200HZ | LOW FREQUENCY REFLECTION RING PROBE, 250HZ-650HZ,. 400"Ø ID X .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARP- .85-100H-1 | LOW FREQUENCY RING PROBE, REFLECTION 100HZ-5KHZ. .850" O.D.X.375"I.D. TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARP- 1.0/.50/200H | LOW FREQUENCY REFLECTION RING PROBE .500"Ø ID X 1.0"Ø OD 200HZ-3KHZ WITH A TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-60, PG.2 USED WITH NDT3157. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARP- 1.40- .85- 200H | REFLECTION RING PROBE, OUTER DIAMETER 1.40, INNER DIAMETER .85, MAX HEIGHT 1.75, CENTER FREQ 200HZ 100-500HZ | 1 | |
| ARP-.197/.750 | LOW FREQUENCY RING PROBE, REFLECTION, 100Hz-5KHZ, 0.197"ID, 0.750"OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.25-.60/100Hz-5khz | LOW FREQUENCY RING PROBE, REFLECTION, 100Hz-5KHZ, 0.250"ID, 0.600"OD, 1.030"H. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.250/1.1-500HZ-5K | Handheld Detachable Probe w/o Cable; Model: RNG = Detachable Ring Probe with Reflection (Driver Pick-up Coils) ; Item Diameter: 0.250in (6.4mm); Tube ID: ; Coil: #= Special; Poly Type: None; Length: No cable; Connector: 1 Pin Female Triaxial Connecto... | 1 | |
| ARP-.255/.650 | DIFFERENTIAL/BRIDGE LOW FREQUENCY RING PROBE, 500HZ-10KHZ, .255"Ø ID, .650"Ø OD WITH TRIAX CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.30/.80 | LOW FREQUENCY REFLECTION RING PROBE .30" I.D. .80" O.D. TRIAX FISCHER CONNECTOR 100Hz-10KHz. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.30/.80/7L | LOW FREQUENCY REFLECTION RING PROBE .30" I.D. .80" O.D. 7-Pin LEMO CONNECTOR 100Hz-10KHz. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.30/.85 | BRIDGE RING PROBE .300"(0.76 cm) ID .850" (2.16cm) OD 300Hz-5KHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.300/.750 | DIFFERENTIAL/BRIDGE LOW FREQUENCY RING PROBE, 500HZ-10KHZ, .300"Ø ID, .750"Ø OD WITH TRIAX CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.31-.87 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-40KHz.310"Ø ID .870"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.310/.750 | LOW FREQUENCY REFLECTION RING PROBE, 70Hz-80KHz.310"Ø ID .750"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.315/.866/4L | LOW FREQUENCY RING PROBE, REFLECTION, 250HZ-40KHZ, 0.315"Ø(8mm) ID, 0.866"Ø(22mm) OD, 1.250"H. 4 WAY LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.315/.866/TF | LOW FREQUENCY RING PROBE, REFLECTION, 250HZ-40KHZ, 0.315"Ø(8mm) ID, 0.866"Ø(22mm) OD, 1.25"H. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.32/.75-100KHZ | LOW FREQUENCY REFLECTION RING PROBE, 10-200KHz.320"Ø ID .750"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.32/.75-1KHZ | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-5KHz.320"Ø ID .750"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.330-.750 | LOW FREQUENCY RING PROBE, REFLECTION, 1-10KHZ TRIAX FISCHER CONNECTOR, .330" INSIDE DIAMETER, .750" OUTSIDE DIAMETER. B777-200/300 PART 6 57-20-03 PAGE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.35-.60/1-5K | LOW FREQUENCY REFLECTION RING PROBE REFLECTION .350"Ø ID .600"Ø OD TRIAX FISCHER CONNECTOR 1-5KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.35-.70/80Hz-4kHz | LOW FREQUENCY REFLECTION RING PROBE .35" ID .7" OD 80Hz-4kHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.35/.70-50HZ | REFLECTION RING PROBE, .70" OD, .35"ID, 50Hz-5KHzSUPPLIED WITH A TRIAX FISCHER CONNECTOR, 50Hz-5KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.35/.70-50HZ/B | DIFFERENTIAL / BRIDGE RING PROBE .700"Ø OD .350"Ø ID, SUPPLIED WITH A TRIAX FISCHER CONNECTOR, 50Hz-5KHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.35/.850-300HZ | LOW FREQUENCY REFLECTION RING PROBE, .35' ID MAX OD .84' 300HZ-2KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.37/.84-2KHZ | LOW FREQUENCY REFLECTION RING PROBE, .37' ID MAX OD .84' 500HZ-5KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.385/.720 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz.385"Ø ID .720"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. FOR REFERENCE STANDARD APB-3302. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.394/.850-TF | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-40KHz.394"Ø ID .850"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.394/.866/4L | LOW FREQUENCY REFLECTION RING PROBE, 250Hz-40KHz.394"Ø ID .866"Ø OD, SUPPLIED WITH A 4 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.4-.80/50Hz-3kHz | LOW FREQUENCY REFLECTION RING PROBE .4" ID .8" OD 50Hz-3kHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.4/.75 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-10KHz.400"Ø ID, .750"Ø OD, .950" HEIGHT, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.4/1.0 | LOW FREQUENCY REFLECTION RING PROBE, 200Hz-10KHz, .400"Ø ID x 1.0"Ø OD x 1.2" HEIGHT. SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.40-.87 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-40KHz.400"Ø ID .870"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.40/.80 | LOW FREQUENCY REFLECTION RING PROBE .40" I.D. .80" O.D. TRIAX FISCHER CONNECTOR 100Hz-10KHz. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.40/.80-5 | LOW FREQUENCY REFLECTION RING PROBE .40" I.D. .80" O.D. TRIAX FISCHER CONNECTOR 100Hz-10KHz. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.42/.80 | LOW FREQUENCY REFLECTION RING PROBE .42" I.D. .80" O.D. TRIAX FISCHER CONNECTOR 200Hz-1KHz. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.425/.95-200HZ | LOW FREQUENCY RING PROBE, REFLECTION, 200Hz-1KHz. OD: .950". ID:.425".SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.440-.810 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz.440"Ø ID .810"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.440-1.0 | LOW FREQUENCY REFLECTION RING PROBE, 300Hz-1KHz, .440"Ø ID x 1.0"Ø OD x 1.77" HEIGHT. SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.45-.800-500HZ | RING PROBE, REFLECTION, 500HZ-10KHZ.450"Ø ID .800"Ø OD WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.45/.700-300HZ-3KHZ | LOW FREQUENCY REFLECTION RING PROBE, 300Hz-3KHz, .450"Ø ID x .700"Ø OD x 1.1" HEIGHT. SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.45/.700-500HZ | LOW FREQUENCY REFLECTION RING PROBE, 1KHz, .450"Ø ID x .700"Ø OD x 1.0" HEIGHT. SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.46-1.0 | LOW FREQUENCY REFLECTION RING PROBE .46" I.D. 1.0" O.D. TRIAX FISCHER CONNECTOR 100HZ-10KHZ. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.5/.8/100HZ-2K | BRIDGE ABSOLUTE SHIELDED RING PROBE .500" ID .800" OD LEMO TRIAX CONNECTOR 100Hz-2KHz. Includes test report and Certificate of Conformance. | 1 | |
| ARP-.5/1.0-200HZ | REFLECTION RING PROBE .500" ID 1.0" OD TRIAX FISCHER CONNECTOR 200Hz-3KHz. 737 PT 6 57-10-60. Includes test report and Certificate of Conformance. | 1 | |
| ARP-.5/1.1-300HZ | LF RING PROBE, REFLECTION, 300HZ-3KHZ .500" ID 1.10" OD TRIAX FISCHER C0NNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.512/1.0 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-5KHz.512"Ø ID 1.0"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.512/1.142/4L | LOW FREQUENCY RING PROBE, REFLECTION, 80Hz-50KHz, 0.512"Ø(13mm) ID x 1.142"Ø(29mm) OD x 1.250"(25mm) H. SUPPLIED WITH A 4 WAY LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.53-.90 | CUSTOM RING PROBE REFLECTION TRIAX FISHER CONNECTOR,...900"Ø OD x .530"Ø ID .900" TALL, 50Hz-5KHz. Includes Test Report and Certificate of Conformance. 737 PART 6 57-10-62, pg.2.. | 1 | |
| ARP-.54-1.0 | LOW FREQUENCY REFLECTION RING PROBE .54" I.D. 1.0" O.D. TRIAX FISCHER CONNECTOR 100HZ-10KHZ. . Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.54/.88 | LOW FREQUENCY REFLECTION RING PROBE .54" I.D., .88" O.D. TRIAX FISCHER CONNECTOR 100Hz-10KHz. 9216710. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.54/1.0-100HZ | LOW FREQUENCY REFLECTION RING PROBE, 50Hz-3KHz.540"Ø ID 1.0"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.55/1.0/200HZ | LOW FREQUENCY REFLECTION RING PROBE, 200Hz-5KHz .550" I.D. 1.0" O.D. 1.200"H TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| ARP-.552/1.0 | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-5KHz.552"Ø ID 1.0"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.6-1.25/50Hz-3kHz | LOW FREQUENCY REFLECTION RING PROBE .6" ID 1.25" OD 50Hz-3kHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.6-200H-1 | LOW FREQUENCY REFLECTION RING PROBE .255"Ø ID x .600"Ø OD 100Hz-5KHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.60-1.0/100HZ | LOW FREQUENCY REFLECTION RING PROBE, 100HZ-3KHZ.600"Ø ID 1.0"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARP-.60-1.0/100Hz | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-3KHz.600"Ø ID 1.0"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.65-500H | LOW FREQUENCY REFLECTION RING PROBE .350"Ø ID x .650"Ø OD 1KHz-10KHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.65-5K | LOW FREQUENCY REFLECTION RING PROBE, 1-5KHz .350"Ø ID .650"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.65/1.1-200HZ | LOW FREQUENCY REFLECTION RING PROBE, 1-200KHz, .650"Ø ID x 1.1"Ø OD x 1.0" HEIGHT. SUPPLIED WITH A TRIAX FISCHER CONNECTOR Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.67-.4/2K | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz .400"Ø ID .670"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.7-2K-1 | LOW FREQUENCY REFLECTION RING PROBE .355"Ø ID x .600"Ø OD 500Hz-20KHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.7-2K-5 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-2KHz .360"Ø ID .700"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.75-.40/100H | REFLECTION RING PROBE .750"Ø OD .400"Ø ID, .980" HIGH, TRIAX FISCHER CONNECTOR, 100Hz-10KHz.. Includes test report and Certificate of Conformance. RR0407-100H-10K-TF | 1 | |
| ARP-.75-1.25/300Hz | REFLECTION RING PROBE, 1.25"OD .75" ID(19.6mm) TRIAX FISHER CONNECTOR 300HZ-1KHZ. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59, 737 PART 6 57-10-53 NDT3168. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.75-1K | LOW FREQUENCY REFLECTION RING PROBE, 1-10KHz .400"Ø ID .670"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.75-500H-5 | LOW FREQUENCY REFLECTION RING PROBE, 550Hz-2KHz, .750"Ø OD .405"Ø ID, TRIAX FISCHER CONNECTOR, 100Hz-10KHz.. Includes test report and Certificate of Conformance. | 1 | |
| ARP-.75-5K | LOW FREQUENCY REFLECTION RING PROBE, 1-5KHz .375"Ø ID .750"Ø OD, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.79-.312 | LOW FREQUENCY REFLECTION RING PROBE .312" ID .790" OD 100HZ-5KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.8-.34-2K | LOW FREQUENCY REFLECTION RING PROBE .312" ID .790" OD 900HZ-5KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.8-1K | LOW FREQUENCY REFLECTION RING PROBE, 1-20KHz,. 400"Ø ID x .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.8-500H-1 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz,. 305"Ø ID x .820"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.80-.30/100HZ-10KHZ | RING PROBE, REFLECTION, 100HZ-10KHZ .300"Ø ID .800"Ø OD WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.80-.40-500HZ | LOW FREQUENCY REFLECTION RING PROBE, 500HZ-10KHZ.400"Ø ID .800"Ø OD WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.80-.40-50HZ | LOW FREQUENCY REFLECTION RING PROBE .4" ID .8" OD 50Hz-3kHz TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.80/.40-200Hz | LOW FREQUENCY REFLECTION RING PROBE, 250Hz-650Hz,. 400"Ø ID x .800"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.80/.40/200H | LOW FREQUENCY RING PROBE REFLECTION .400" ID .800"OD TRIAX FISCHER CONNECTOR 100HZ-10KHZ . REFERENCE: 737 PART 6 57-10-60, pg.2. USED WITH (NDT3156, 57, 59, 61, 62, 63, 64). Includes test report and Certificate of Conformance. | 1 | |
| ARP-.84-.435/400HZ-5KHZ | LOW FREQUENCY RING PROBE, REFLECTION, 400HZ-5KHZ, 0.435" ID, 0.840"Ø OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.85-100H-1 | LOW FREQUENCY RING PROBE, REFLECTION 100Hz-5KHz. .850" O.D.x.375"I.D. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.85-5K | LOW FREQUENCY REFLECTION RING PROBE, 1-5KHz, .500"Ø ID x .845"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.85/.35-500HZ | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz,. 350"Ø ID x .850"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.85/1.40-200H | REFLECTION RING PROBE .85"I.D.1.40"57-10 | 1 | |
| ARP-.85/1.40-200Hz | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX CONNECTOR 100Hz-500Hz. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. Includes test report and Certificate of Conformance. | 1 | |
| ARP-.87/1.40 | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX FISCHER CONNECTOR 100Hz-10KHz. 9216710. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.886-.433/10K | LOW FREQUENCY REFLECTION RING PROBE, .433"Ø ID .886"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR 5KHz -30KHz. Includes Test Report and Certificate of Conformance | 1 | |
| ARP-.9-100H-2 | LOW FREQUENCY REFLECTION RING PROBE, 50Hz-5KHz,. 505"Ø ID x 1.000"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.9-100H-5 | LOW FREQUENCY RING PROBE, REFLECTION, 80 Hz-4KHz WITH TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-59, pg.2. 737 PART 6 57-10-58, pg.2. 737 PART 6 57-10-54, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.90-.25/500HZ | LOW FREQUENCY REFLECTION RING PROBE 500Hz- 5KHz, .250"Ø ID x .900"Ø DIA OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-.96/1.45-500HZ | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-3KHz, .965"Ø ID x 1.45"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-0510-6/TF | LOW FREQUENCY REFLECTION RING PROBE .525"Ø ID 1.025"Ø OD, TRIAX FISCHER CONNECTOR 200Hz-10KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-.4/2K | REFLECTION RING PROBE, 2KHz, .400" ID 1.0" OD TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-.40/100H | REFLECTION RING PROBE 1.00"Ø OD .400"Ø OD, 1.20" HIGH, TRIAX FISCHER CONNECTOR, 100Hz-10KHz.. Includes test report and Certificate of Conformance. RR0410-100H-10K-TF | 1 | |
| ARP-1.0-.42/100H | LOW FREQUENCY REFLECTION RING PROBE 100Hz- 2KHz, .42"Ø ID x 1.0"Ø DIA OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-.5/50HZ | LOW FREQUENCY REFLECTION RING PROBE, 50Hz-3KHz, .500"Ø ID x 1.00"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-.50/500H | LOW FREQUENCY BRIDGE / DIFFERENTIAL RING PROBE .500"Ø ID 1.00"Ø OD, TRIAX FISCHER CONNECTOR 500Hz-5KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-.55/100H | REFLECTION RING PROBE 1.00"Ø OD .550"Ø OD, 1.20" HIGH, TRIAX FISCHER CONNECTOR, 100Hz-10KHz.. Includes test report and Certificate of Conformance. RR0510-100H-10K-TF | 1 | |
| ARP-1.0-.60-100H | LOW FREQUENCY REFLECTION RING PROBE .60" ID 1.0" OD 100HZ-3KHZ TRIAX FISCHER CONNECTOR 737 PT 6 57-10-55 and 777-200/300 57-20-03 PART 6 PAGE 1. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-.60-100HZ | REFLECTION RING PROBE, 100HZ-5KHZ, .500" ID X 1.0" OD, TRIAX, ALUM. | 1 | |
| ARP-1.0-100H-1 | LOW FREQUENCY REFLECTION RING PROBE, 50Hz-3KHz, .500"Ø ID x 1.00"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-100H-5 | REFL RING PROBE 500 HZ-3KHZ, 1.0"Ø OD, .500"Ø ID WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-100H-5/4L | LOW FREQUENCY REFLECTION RING PROBE, 50Hz-3KHz, .500"Ø ID x 1.00"Ø OD SUPPLIED WITH A 4 PIN LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0-500H-3 | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-10KHz, .530"Ø ID x 1.10"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0/.312/500HZ | LOW FREQUENCY REFLECTION RING PROBE 500Hz- 5KHz, .312"Ø ID x 1.0"Ø DIA OD, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0/.33-1k | LOW FREQUENCY REFLECTION RING PROBE .330" ID 1.0" OD 100HZ-1KHZ TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0/.4/2K | LOW FREQUENCY REFLECTION RING PROBE, 1-5KHz, .400"Ø ID x 1.00"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0/.50/200H | LOW FREQUENCY REFLECTION RING PROBE .500"Ø ID x 1.0"Ø OD 200Hz-3KHz WITH A TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-60, pg.2 USED WITH NDT3157. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.0/100H-6 | CUSTOM LOW FREQUENCY RING PROBE 100Hz-5KHz REFLECTION WITH TRIAX FISHER CONNECTOR737 PART 6 57-10-55, pg.2 USED WITH NDT3152-X SERIES. Includes test report and Certificate of Conformance... | 1 | |
| ARP-1.00-.55-200H | LOW FREQUENCY REFLECTION RING PROBE, 200Hz-2KHz, .550"Ø ID x 1.00"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.07/1.57-500HZ | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-1KHz, 1.07"Ø ID x 1.57"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.1-.53/200Hz | LOW FREQUENCY REFLECTION RING PROBE .530"Ø ID and a 1.100"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR 100Hz-300Hz. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.1-.625/100HZ | LOW FREQUENCY RING PROBE, BRIDGE / DIFFERENTIAL, .625"Ø ID 1.1"Ø OD, 100Hz-1KHz WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.1-100H | LOW FREQUENCY REFLECTION RING PROBE .750"Ø ID 1.100"Ø OD WITH A TRIAX FISCHER CONNECTOR 50Hz-3KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.1-100H-1 | LOW FREQUENCY REFLECTION RING PROBE .530"Ø ID 1.100"Ø OD WITH A TRIAX FISCHER CONNECTOR 50Hz-5KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.10-.67-100H | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, .670"Ø ID 1.100"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR 100Hz-1KHz. IncludesTest Report and Certificate of Conformance. | 1 | |
| ARP-1.2-.6/100H | LOW FREQUENCY REFLECTION RING PROBE 1.20"Ø OD .600"Ø ID TRIAX FISCHER CONNECTOR 50HZ-3KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.2/100H-7 | LOW FREQUENCY REFLECTION RING PROBE 1.2" OD, .605" ID, 50Hz-3KHz TRIAX FISHER CONNECTOR. 737 PART 6 57-10-58, pg.2. and 737 PART 6 57-10-54, pg.2 USED WITH NDT3153-X AND 3167-X SERIES REFERENCE STANDARDS. Includes Test Report and Certificate of ... | 1 | |
| ARP-1.25-.62/50Hz | LOW FREQUENCY REFLECTION RING PROBE, 50Hz- 500Hz .620"ID 1.25" OD TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.25-.75-300H | REFLECTION RING PROBE TRIAX FISHER CONNECTOR, 1.25"OD .75" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-53, pg.2, USED WITH REFERENCE STANDARD NDT3168 AND NDT3176-X. Includes test report and Certificate of Conformance... | 1 | |
| ARP-1.25-.77/300H | LOW FREQUENCY RING PROBE REFLECTION TRIAX FISHER CONNECTOR,1.25"OD(31.8mm) .77" ID(19.6mm) 300HZ-1KHZ. 737 PART 6 57-10-62, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.25/.5 | LOW FREQUENCY RING PROBE, BRIDGE / DIFFERENTIAL, .500"Ø ID 1.25"Ø OD, 100Hz-1KHz WITH TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.25/.74/50HZ | LOW FREQUENCY REFLECTION RING PROBE, 50HZ- 1KHZ .74"ID 1.25" OD TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.25/.86/50HZ-3kHZ | LOW FREQUENCY REFLECTION RING PROBE 1.25"Ø OD, .860"Ø ID, 50HZ-3kHZ, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.3-.78-500H | LOW FREQUENCY REFLECTION RING PROBE .780"Ø ID, 1.300"Ø OD WITH A TRIAX FISCHER CONNECTOR, 500Hz-20KHz. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.35-.85-500H | LOW FREQUENCY RING PROBE, REFLECTION 100Hz-1KHz, 1.35" O.D.x.850"I.D. TRIAX FISCHER CONNECTOR USED ON NDT3178G 737 PART 6 57-10-62, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.35-.85-500HZ | REFLECTION RING PROBE OD 1.35 ID.850 HEIGHT 1.0" 100HZ-1KHZ, ALUM. | 1 | |
| ARP-1.40-.60/80HZ | LOW FREQUENCY REFLECTION RING PROBE .60"Ø I.D. 1.40"Ø O.D. TRIAX CONNECTOR 80Hz-3KHz., 757 PT 6 57-20-03. Includes test report and Certificate of Conformance. | 1 | |
| ARP-1.40-.62 | LOW FREQUENCY RING PROBE, REFLECTION 100Hz-1KHz, 1.40" O.D.x.620"I.D. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.40-.85-200H | LOW FREQUENCY RING PROBE, REFLECTION 100Hz-1KHz, 1.40" O.D.x.850"I.D. TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.40-.85-200HZ | REFLECTION RING PROBE, OD 1.40, ID .85, MAX HEIGHT 1.75, CENTER FREQ 200HZ 100-500HZ, ALUM. | 1 | |
| ARP-1.40/.85-200Hz | LOW FREQUENCY REFLECTION RING PROBE .85" I.D. 1.40" O.D. TRIAX FISCHER CONNECTOR 100Hz-500Hz. REFERENCE STANDARD NDT3176-X 737 PT 6 57-10-59. Includes test report and Certificate of Conformance. | 1 | |
| ARP-1.45-.96/500H | LOW FREQUENCY REFLECTION RING PROBE, 1.45"Ø O.D., .960"Ø I.D SUPPLIED WIRTH A TRIAX FISCHER CONNECTOR. FREQUENCY RANGE- 100Hz-1KHz. Includes test report and Certificate of Conformance. | 1 | |
| ARP-1.5/.685-100H | LOW FREQUENCY REFLECTION RING PROBE, . 50Hz-3KHz, I.D. .685"Ø, O.D. 1.50"Ø. SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| ARP-1.50/2.0-100HZ | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, 1.50"Ø ID x 2.00"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.57-1.0/100H | LOW FREQUENCY REFLECTION RING PROBE, 100Hz-1KHz, 1.00"Ø ID x 1.57"Ø OD SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-1.60/.90-100Hz | LOW FREQUENCY REFLECTION RING PROBE .90" I.D. 1.60" O.D. TRIAX CONNECTOR 100Hz-1KHz.. Includes test report and Certificate of Conformance. | 1 | |
| ARP-31.8M/19.6M-100H | CUSTOM RING PROBE REFLECTION TRIAX FISHER CONNECTOR,1.25"OD(31.8mm) .77" ID(19.6mm) 100HZ-1.5KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP-34.3M/21.6M-100H | CUSTOM RING PROBE REFLECTION TRIAX FISHER CONNECTOR,1.35"OD(34.3mm) .77" ID(22.4mm) 100HZ-1.5KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP/13.5/29P | LF REFLECTION RING PROBE, 1.0" OD, .54 ID, 1.15" HEIGHT 100HZ-10KHZ, TRIAX FISCHER CONNECTOR | 1 | |
| ARR-.125 | OLYMPUS NDT / NDT ENGINEERING CORP. ROTARY PROBE FOR RA2000 SCANNER 100KHz-2MHz 4 PIN STEP LEMO, 1/8"(.125") OD, 1.1" WORKING LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| ART0984990100 | GAS SOLDERING IRON WURTH | 1 | |
| AS 5282 | KETOS RING PRODUCT CODE 159999 | 1 | |
| AS-568A-003 | O'RING (PARKER) 3/16 in OD 80 DURO ETYLANE PROPYLANE | 1 | |
| AS3209-212 | PREFORMED PACKING SEAL,O-RING | 1 | |
| AS350.000.045 | DISASSEMBLY / ASSEMBLY - SPRING ANTI-VIBRATOR - MAIN ROTOR HUB | 1 | |
| AS350.000.047 | TOOL FOR INSTALLING LAMINATED HALF-BEARINGS OF THE TAIL ROTOR | 1 | |
| AS43003-908 | RING, SEALING TOROID | 1 | |
| AS43013-108 | RING SEALING TOROIDAL | 1 | |
| AS43013-222 | RING, SEALING TOROIDAL | 5 | |
| AS43013106 | RING,SEALING TOROIDAL | 1 | |
| ASDP-.25/100K | DIFFERENTIAL PROBE, SPRING LOADED | 1 | |
| ASDP-.375/5K | DIFFERENTIAL PROBE, SPRING LOADED..5 -20 KHZ TRIAX FISCHER CONNECTOR | 1 | |
| ASGP1BR | RED NON-MARRING TRIM TOOL .312 | 1 | |
| ASGP2BR | RED NON-MARRING TRIM TOOL .250 | 1 | |
| ASHCROFT 0-15 PSI | GAUGE DIAMETR 63 MM, THREADED JOINT 1/4”NPT, ORIENTATION WIRING - RADIAL, -SILICONE BEAD, PROTECTION INDEX IP65 | 1 | |
| ASL08083W0900-01 | MEASURING TOOL-DUMMY SEAT TRACKS | 1 | |
| ASPL-P2A2360P20/30 | PORTABLE ELECTRONIC PROOF LOADER FOR BEARINGS P2A2360 /P2A2360P20/P2A2360P30 | 1 | |
| ASS-00739 | Snap ring installation aid | 1 | |
| ASS-01098 | BEARING INSTALLATION AND REMOVAL TOOL | 1 | |
| ASS-01392 | FWD BEARING PUSHER | 1 | |
| AST2017SACP | SW HEAD SPRING CLAMP PLIERS | 1 | |
| ASTDD463 | DETROIT ENGINE BARRING TOOL | 1 | |
| ASTWSC15 | WIRE SOLDERING CLAMP | 1 | |
| AT-71055 | TORQUE ADAPTER, BEARING AND GLAND RETAINERS | 1 | |
| AT-71055 | Torque Adapter, Bearing and Gland Retainers | 1 | |
| AT-71055A | Torque Adapter, Bearing and Gland Retainers | 1 | |
| AT-71687 | TORQUE ADAPTER, RIGGING RETAINING RING | 1 | |
| AT-71687 | Torque Adapter, Rigging Retaining Ring | 1 | |
| AT-E330 | DESOLDERING PUMP | 1 | |
| AT100S/FF-IV94N | AT100S/FF-IV94N IPLEX NX TIP ADAPTER - INCLUDES O-RING. - DIRECTION OF VIEW: SIDE - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 100° - DEPTH OF FIELD: 8 - MM - 1 YEAR WARRANTY | 1 | |
| AT120D/FF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT120D/NF-IV94N | IPLEX NX TIP ADAPTER INCLUDE O-RING. DIRECTION OF VIEW: DIRECT SCOPE DIAMETER: 4 MM FIELD OF VIEW: 120° DEPTH OF FIELD: 2MM TO 200MM | 1 | |
| AT120D/NF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT120S/FF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT120S/NF-IV96N | TIP ADAPTER-INCL.O-RING | 1 | |
| AT1212-18 | NEEDLE HOLDER SPRING | 1 | |
| AT123B14 | REVERSE VALVE DETENT SPRING | 1 | |
| AT153F-23 | NEEDLE BEARING | 1 | |
| AT2016,ET-9 | ET-9, AT2016 TIP,SPRING SHREDDER | 1 | |
| AT202-18 | NEEDLE BEARING | 1 | |
| AT202-20 | DRIVE BEARING | 1 | |
| AT2020,ET-8 | ET-8, AT2020 TIP,SPRING SHREDDER | 1 | |
| AT204-27 | NEEDLE BEARING | 1 | |
| AT204A-8 | NEEDLE BEARING | 1 | |
| AT218-31 | NEEDLE BEARING | 1 | |
| AT240-1 | THREAD RING GEAR | 1 | |
| AT265-28 | THREADED RING GEAR | 1 | |
| AT265-5 | TAPERED SPRING | 1 | |
| AT31848 | TOOL-SPRING COMPRESSION, NLG DRAG BRACE | 3 | |
| AT31849 | TOOL SPRING DECOMPRESSION | 7 | |
| AT351-20 | NUT RING, SHELL SIZE 20 .112-40UNC SPACED 1.156 SE | 1 | |
| AT380-29 | FRONT END-PLATE O-RING | 1 | |
| AT380-38 | TRIGGER BODY O-RING | 1 | |
| AT380-39 | TRIGGER BODY NEEDLE VALV ORING | 1 | |
| AT380-40 | TRIGGER BODY O-RING | 1 | |
| AT406B9 | BUSHING AND O-RING | 1 | |
| AT406C-21 | BEARING SHIELD | 1 | |
| AT50D/50D-IV94G | MEASURING STEREO DIRECT VIEW LENS | 1 | |
| AT50S/50S-IV94G | MEASURING STEREO SIDE VIEW LENS | 1 | |
| AT5500-15 | FRONT END PLATE O-RING | 1 | |
| AT55850 | Electrical bonding test fixture (support drag brace during tests) | 1 | |
| AT55852 | Test Fixture (support sidestay during tests) | 1 | |
| AT56024 | Guide bullet and seal fuide, upper bearing installation tool | 1 | |
| AT5765 | DUMMY SPRING WASHER | 1 | |
| AT60S60S-IV86 | plex Tip Adapter (90 degree measuring). | 2 | |
| AT610-31 | ADJ SPRING | 1 | |
| AT69-35669-1 | Autopilot Engage Spring Guide Wrench | 1 | |
| AT704A-27 | NEEDLE BEARING | 1 | |
| AT738-18 | NEEDLE BEARING EA | 1 | |
| ATB1067 | INSERTION TOOL 20 GAGE FEMALE ROUND CANNON PLUG (WITHOUT SPRING LOCKS). | 3 | |
| ATC600A | TRANSPONDER / DISTANCE MEASURING EQUIPMENT TEST SET | 23 | |
| ATH 2052-TSS | TIP, SHEDDER, SPRING | 1 | |
| ATI02-250 | DEBURRING TOOL | 1 | |
| ATI313-7 | BEARING IDLER | 1 | |
| ATI33112 | NEEDLE BEARING | 1 | |
| ATI429WRA-2 | ADJUSTMENT RING ASSY | 1 | |
| ATI437C | DEBURRING BLADE SET-3 PC | 1 | |
| ATI512 | DEBURRING CHIP CHASERS SCRAPER | 1 | |
| ATI520CT-16 | QUAD RING | 1 | |
| ATI521A | DEBURRING TOOL BLADE | 1 | |
| ATI521C | DEBURRING TIP 3/8D- 7/32 SHK | 1 | |
| ATI550SG | SPRING TENSION SIDE-GRIP CLAMP | 1 | |
| ATI551SG | SPRING TENSION SIDE-GRIP CLAMP | 1 | |
| ATI552SG | SPRING TENSION SIDE-GRIP CLAMP | 1 | |
| AV-921186 | BEARING DRIVER | 1 | |
| AV13-1672 | ADAPTER, SLIP RING | 1 | |
| AV15-1991 | INSERTER AND REMOVER, BEARING AND BUSHING | 1 | |
| AWP2-51 | BEARING MODULE TEST JIG | 1 | |
| AXG7000-501 | USED TO PREVENT MAIN, NOSE AND STERING RETRACTION WHILE ON THE GROUND. | 6 | |
| AZL02574-R00 | REMOC?O BEARING CUP - INTERNO E EXTERNO MLG DIAMETRO 56,75MM | 1 | |
| AZL02578-R00 | SUPORTE DE INSTALAC?O BEARING CUP NLG - DIA INTERNO 70MM E DIA EXTERNO 80MM | 1 | |
| AZL05004-R00 | INBD BEARING CUP REMOVAL TOOL - MLG WHEEL E175 | 1 | |
| AZL1083-R00 | IRON WHEEL RIM 8'' WITH TIRE 4.80/4.00 X 8 AIR CHAMBER BEARING 6205 - DIAMETER 25MM | 1 | |
| Alberth FSLF | SPRING LOADED SLIDER FAIRING REMOVAL TOOL | 1 | |
| B10 | DEBURRING TOOL HSS BLADE B10 | 1 | |
| B14108-601 | O-RING NON STANDARD | 2 | |
| B15619 | PROBE SPRING LOADED | 1 | |
| B19285-1 | "TOOL - CHARGING ADAPTER TO CHARGING VALVE (WITH O-RING WHICH CONFORMS TO | 1 | |
| B20003-75 | #3 LANDING GEAR STEERING RIGGING PIN KIT | 1 | |
| B2226-12 | BRONZE BEARING 1"3/8 ID X 1"5/8 OD X 1"1/2 LG | 1 | |
| B25004-1 | LIFE RAFT DOOR COMPRESSION SPRING - REMOVAL/INSTALLATION TOOL | 2 | |
| B27024-1 | REMOVAL/INSTALLATION FIXTURE - NEUTRAL SHIFT ROD SPRING | 1 | |
| B27043-1 | JIG EQUIPMENT - ELEVATOR FEEL AND CENTERING UNIT | 1 | |
| B27053-1 | FIXTURE - SPRING INSTALLATION AND REMOVAL, RUDDER NEUTRAL SHIFT ROD | 2 | |
| B27060 | SPRING REMOVAL/INSTL SET -0 DECENTERING, | 1 | |
| B27060-1 | SPRING REMOVAL/INSTL SET - DECENTERING, ELEVATOR CONTROLS | 9 | |
| B27061-2 | ELEVATOR AND RUDDER PCU MONITORING SYSTEM | 1 | |
| B27063-1 | Spring Tension Holder | 2 | |
| B27063-10 | SPRING TENSION HOLDER | 2 | |
| B27065-12 | USED TO LOCK CIRCUIT BREAKERS IN THE OPEN POSITION DURING MAINTENANCE PROCEDURES. | 11 | |
| B32001-4 | THIS PIN IS USED ON THE MAIN AND NOSE LANDING GEAR TO PREVENT ACCIDENTAL RETRACTION DURING GROUND OPERATIONS. THREE PINS ARE REQUIRED. | 22 | |
| B32002 | EXTENDER - DOWNLOCK SPRING MLG & NLG | 1 | |
| B32002 REV A | EXTENDER - DOWNLOCK SPRING MLG & NLG | 1 | |
| B32002-1 | EXTENDER - DOWNLOCK SPRING, MAIN LANDING GEAR AND NOSE LANDING GEAR (MLG AND NLG) | 12 | |
| B32019-1 | THIS STRAP ASSEMBLY IS USED TO LOCK THE NLG SHOCK STRUT INTO A DEPRESSURIZED POSITION DURING GROUNDMAINTENANCE OPERATIONS. | 11 | |
| B32024-84 | PULLER EQUIPMENT - LOWER BEARING SEAL RETAINER, NOSE LANDING GEAR (NLG) | 6 | |
| B32025-75 | PULLER EQUIPMENT - LOWER BEARING SEAL RETAINER, MAIN LANDING GEAR (MLG) | 3 | |
| B32025-78 | PULLER EQUIPMENT - LOWER BEARING SEAL RETAINER, MAIN LANDING GEAR (MLG) | 10 | |
| B32027-1 | SOCKET SET - TRUNNION BEARING RETENTION NUTS, MAIN LANDING GEAR | 8 | |
| B32032 | TEST EQUIPMENT -0 NOSE WHEEL STEERING DRUM | 1 | |
| B32032-1 | TEST EQUIPMENT - NOSE WHEEL STEERING DRUM MECHANISM | 1 | |
| B32033-1 | WRENCH EQUIPMENT - ALTERNATE LOCKUP RELEASE, ACTUATOR LOCK RING, MAIN LANDING GEAR (MLG) | 2 | |
| B32034-1 | WRENCH EQUIPMENT - ALTERNATE UPLOCK RELEASE ACTUATOR, LOCK RING, NOSE LANDING GEAR (NLG) | 1 | |
| B32038 | EXTENDER -0 UPLOCK SPRING, MLG | 1 | |
| B32038-1 | EXTENDER - UPLOCK SPRING, MAIN LANDING GEAR (MLG) | 3 | |
| B32038-1-M | EXTENDER-UPLOCK SPRING | 1 | |
| B32038-2 | EXTENDER MLG UPLOCK SPRING | 1 | |
| B32040 | BUILD-UP EQPT -0 ACTUATOR, NOSE GEAR STEERING | 1 | |
| B32040-1 | BUILD-UP EQUIPMENT - ACTUATOR, NOSE GEAR STEERING | 1 | |
| B32040-35 | BUILD-UP EQUIPMENT - ACTUATOR, NOSE GEAR STEERING | 1 | |
| B32040-36 | BUILD-UP EQUIPMENT - ACTUATOR, NOSE GEAR STEERING | 1 | |
| B32040-37 | BUILD-UP EQUIPMENT - ACTUATOR, NOSE GEAR STEERING | 2 | |
| B32051 | SPRING EXTENDER -0 LOCK RELEASE ACTUATOR, NG & | 1 | |
| B32051-1 | SPRING EXTENDER - LOCK RELEASE ACTUATOR, MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) DOOR | 5 | |
| B32051-2 | SPRING EXTENDER ASSY | 1 | |
| B32066-1 | ROLLER SWAGING AND REMOVAL EQUIPMENT - BEARING | 2 | |
| B32067 | WRENCH ADAPTER -0 NOSE WHEEL STEERING TILLER | 1 | |
| B32067-1 | WRENCH ADAPTER - NOSE WHEEL STEERING TILLER HANDLE | 4 | |
| B32067-2 | STEERING TILLER HAND WRENCH ADAPTER | 1 | |
| B5109 | FEEDBACK RING PULLER (MCCAULEY) | 1 | |
| B52003-15-S | STRAP & D-RING NET | 1 | |
| B52017 | COMPRESSER -0 SPRING, PASSENGER DOOR | 1 | |
| B52017-1 | COMPRESSOR - SPRING, PASSENGER DOOR COUNTERBALANCE | 4 | |
| B52022-21 | CAL, MEASURING, PASS/DOOR B757, | 8 | |
| B5365 | END STOP-RING | 1 | |
| B55002-25 | HORIZONTAL STAB HINGE DEARING TOOL SET | 1 | |
| B57003 | ADAPTER EQPT -0 TRUNNION BEARINGS AND MOUNT, MLG | 1 | |
| B57003-3 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-33 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 11 | |
| B57003-34 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-4 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 1 | |
| B737-200 | BYPASS & EXHAUST PLUGS, folding donut ring type, 300-500 models - SET OF 6 | 1 | |
| B737-250 | BYPASS & EXHAUST PLUGS, folding donut ring type, 600-900 models (NG - SET OF 6 | 1 | |
| B737-255 | BYPASS & EXHAUST PLUGS, folding donut ring type, 600-900 models (NG - SET OF 6 | 1 | |
| B748-1692(star) | 2"OD DISC SPRING ZINC PLATED | 1 | |
| B78004 | RIGGING FIXTURE -0 SPRING BUMPER, FAN DUCT COWL | 1 | |
| B78004-1 | RIGGING FIXTURE - SPRING BUMPER, FAN DUCT COWL AND THRUST REVERSER | 3 | |
| B78006-7 | RINGBAR / RIGGING BAR-T/R POSITION FEEDBACK LVDT | 9 | |
| B78017-1 | Installation Equipment - Bearing - Lead Screw, Thrust Reverser Non-Locking Actuator Assembly | 9 | |
| B935-5503 | HOLDER,CUTTING TOOL;|BORING BAR TOOL HOLDER; | 1 | |
| BA-20-3D | BEARING ANALYZER DRIVE UNIT | 1 | |
| BA-20-3E | BEARING ANALYZER INDICATOR UNIT | 1 | |
| BA-AR12 | SPRING LOADED AIR REGULATOR | 1 | |
| BAB890411 | BALL LOCK PIN 1/4 X 1.1" RING HANDLE DOUBLE ACTING | 1 | |
| BAB890522 | BALL LOCK PIN 5/16 X 2.20 RING HANDLE DOUBLE ACTING | 1 | |
| BACB10X4TM | LOOKING TO FIND A ROLLER STAKING TOOL FOR THE FOLLOWING BEARINGS. THE SPEC FOR THIS IS BAC5435. IF YOU NEED A COPY OF THE SPEC, FEEL FREE TO EMAIL ME. BEARINGS; PN: BACB10X4TMPN: BACB10A203GM2 PLEASE NOTE THIS IS FOR THE MILITARY AND NEEDS TO BE CON | 1 | |
| BAT-15002 | Garland Non-Marring Plastic Mallet - 1-1/2" Face - MADE IN THE USA! | 1 | |
| BAT-15005 | Garland Non-Marring Plastic Mallet - 2-1/2" Face - MADE IN THE USA! | 1 | |
| BAT-196HDT | Hand Deburring Tool - For Deburring Holes | 1 | |
| BAT-4475-2 | 100 Degree Non-Piloted "Rosebud" Threaded Countersink / Deburring Bit | 1 | |
| BAT-514 | DOVE TAIL DEBURRING TOOL | 2 | |
| BAT-542 | Spring Tension Clamps - Plier Operated | 1 | |
| BAT-89780 | COARSE NIB FILE / DEBURRING TOOL | 1 | |
| BAT-89790 | FINE NIB FILE / DEBURRING TOOL | 1 | |
| BAT-AR12 | Spring Loaded Air Regulator | 2 | |
| BAT-DBUR6 | 6 Piece Deburring Set | 1 | |
| BAT-DLRB2 | Speed Driver "Dog Leg" Deburrer with 3 Flute Rosebud Deburring Bit - 2 Piece Set | 1 | |
| BAT-UWM19 | Mandrel for Small Unitized Deburring/Polishing Wheels | 1 | |
| BCR-I | INBOARD BEARING CUP REMOVAL TOOL | 1 | |
| BCR-O | OUTBOARD BEARING CUP REMOVAL TOOL | 1 | |
| BDS160 | GEDORE 010340 BDS160 - DIAL MEASURING TORQUE WRENC | 1 | |
| BDS200 | GEDORE 010360 BDS200 - DIAL MEASURING TORQUE WRENC | 1 | |
| BDS80A | GEDORE 010300 BDS80A - DIAL MEASURING TORQUE WRENC | 1 | |
| BDS80E | GEDORE 010320 BDS80E - DIAL MEASURING TORQUE WRENC | 1 | |
| BEL-PIMIS-EDS | MONITOR AND TIDY DURING BUILDING WORK BEL CRM | 1 | |
| BH4016A3 | PREVENT LEAKAGES OF THE DRIVE SHAFT SEAL DURING TEST | 1 | |
| BHP162 | 7 TON, HYDRAULIC CROSS BEARING PULLER SET WITH HAND PUMP | 1 | |
| BK7000-8 | KICKSTAND WITH 2 ORINGS | 1 | |
| BL3RA10S | 3/16" X 1" QUICK RELEASE PIN, RING HANDLE | 1 | |
| BL47473 | MOUNTING CONE AND PUSHER FIT SCRAPER RING | 1 | |
| BLC3R10 | BALL LOCK PIN 3/16 X 1" RING HANDLE | 1 | |
| BLC3RA10S | BALL LOCK PIN 3/16 X 1.0" RING HANDLE | 1 | |
| BLPK14HVLP41 | NEEDLE ADJ SPRING | 1 | |
| BLPK14HVLP49 | DECORATE RING | 1 | |
| BLPK14HVLP56 | NEEDLE SEALING SPRING | 1 | |
| BLPK14HVLP61 | AIRFLOW ADJ SEALING RING | 1 | |
| BLPK14HVLP62 | AIRFLOW ADJ SEALING RING | 1 | |
| BLPVAC5-32 | MOTOR BASED SEAL RING | 1 | |
| BLS3RS10S | BALL LOCK PIN 3/16 X1.0" RING HANDLE | 1 | |
| BLS4R07N | BALL LOCK PIN 1/4 X 0.7" RING HANDLE | 1 | |
| BLS4R08SF | KLP, RING HANDLE, 1/4 X 0.8 SS 4-BALL - BLS4R08SF | 3 | |
| BLS4R10N | BALL LOCK PIN 1/4 X1.0" LG STEEL NON DRIVE OUT WITH HANDLE RING | 2 | |
| BLW697 | EDGE PROTECTION - STRINGER | 1 | |
| BNAT-DBUR6 | DEBURRING TOOL | 1 | |
| BOF112T7000 | BORING FIXTURE, AFT DIAGONAL | 1 | |
| BOF65B00763 | BORING FIXTURE - BODY LANDING GEAR TRUNNION SUPPORT FITTING REWORK | 1 | |
| BOF65B02025 | BEARING REPLACEMENT TOOL SET - FLAP FITTING, TRAILING EDGE | 2 | |
| BOF65B07950 | BORING FIXTURE - TRUNNION FITTING ASSEMBLY, NOSE LANDING GEAR | 1 | |
| BOFAOGTOOL747LG0013 | BORING FIXTURE FITTING ASSEMBLY - TRUNNION, NOSE LANDING GEAR | 1 | |
| BP650MP | CORDLESS SOLDERING IRON OUTDOOR | 1 | |
| BP860MP | SOLDERING IRON, CORDLESS | 2 | |
| BR.45-.65/500H | Bridge Ring Probe .450 ID .650 OD 100H-10KHz Low Freq | 1 | |
| BRE3700 | ROD END BEARING | 1 | |
| BRS10 | Ionic Systems Slotted Butt Ring Section 10 | 2 | |
| BRS11 | Ionic Systems Slotted Butt Ring Section 11 | 2 | |
| BRS3 | Ionic Systems Slotted Butt Ring Section 3 | 2 | |
| BRS4 | Ionic Systems Slotted Butt Ring Section 4 | 2 | |
| BRS5 | Ionic Systems Slotted Butt Ring Section 5 | 2 | |
| BRS6 | Ionic Systems Slotted Butt Ring Section 6 | 2 | |
| BRS7 | Ionic Systems Slotted Butt Ring Section 7 | 2 | |
| BRS9 | Ionic Systems Slotted Butt Ring Section 9 | 2 | |
| BS1010 S10 | DEBURRING BLADES (SET OF 10) | 1 | |
| BS426 | MEASURING CYLINDER | 1 | |
| BST-2912-9 | ADAPTER RING-PROPELLER | 1 | |
| BST103R | 3PC MAG BRAKE SPRING SET RED | 1 | |
| BST12 | HD NPR BRAKE SPRING TOOL | 1 | |
| BST12G | HDNPR BRAKE SPRING TOOL GM | 1 | |
| BST12O | HDNPR BRAKE SPRING TOOL ORG | 1 | |
| BT10 | T HANDLE SPRING BRAKE TOOL | 1 | |
| BTA-117A | T-BAR, LARGE FOR WHEEL & BEARING PROTECTORS AND PALLETS | 1 | |
| BTA-62028P | MAIN WHEEL HUB & BEARING CASE SEAL-RED | 1 | |
| BTA-72030A | WHEEL AND BEARING PROTECTOR SET (737-500) MAIN | 1 | |
| BTA-72034A | WHEEL & BEARING PROTECTOR SET (RED) | 1 | |
| BTA-72034A | WHEEL & BEARING PROTECTOR SET FOR: CRJ900 NLG COLOR: RED, SM TTBAR | 1 | |
| BTA-72034B | WHEEL AND BEARING PROTECTOR SET (737-400 NOSE) RED | 3 | |
| BTA-72035 | A310 NW WHEEL AND BEARING PROTECTOR SET P.N BTA-72035 / PER SET | 1 | |
| BTA-72038 | WHELL AND BEARING PROTECTING SET, COLOR RED | 1 | |
| BTA-72040 | WHEEL AND BEARING PROTECTOR SET (A330 MAIN) ORANGE | 2 | |
| BTA-72045 | WHEEL AND BEARING PROTECTOR SET, FOR: 737 MAX MAIN WHEEL. T-BAR: LARGE. COLOR: YELLOW | 2 | |
| BTA-72045 | WHEEL AND BEARING PROTECTOR SET, FOR.737 NG MAIN WHEEL. T-BAR: LARGE. | 2 | |
| BTA-72331 | WHEEL AND BEARING PROTECTOR SET (A320 NOSE) YELLOW | 3 | |
| BTA-72331-A | ATR 42/72 MAIN WHEEL BEARING PROTECTIVE DET | 3 | |
| BTA-72333 | WHEEL AND Bearing Protector Set (A330 Nose) | 2 | |
| BTA-72336 | WHEEL AND BEARING PROTECTOR SET | 2 | |
| BTA72023M0D1 | MAIN WHEEL AND BEARING PROTECTOR | 8 | |
| BTA72045 | WHEEL AND BEARING PROTECTING SET (737-800) MAIN | 2 | |
| BTA72331 | NOSE WHEEL AND BEARING PROTECTOR | 3 | |
| BTBTA-72023MOD1 | WHEEL AND BEARING PROTECTOR SET (A320 MAIN) YELLOW | 1 | |
| BYMH 3/16-1/4 | ADJUSTABLE BOLT-HOLE PROBE NDT ENGINEERING CORPORATION | 1 | |
| BYU-12/16 | ADJUSTABLE BOLT-HOLE PROBE NDT ENGINEERING CORPORATION | 1 | |
| C-25-1 1/2 | BEARING, PILLOW BLOCK. 1 1/2" DI | 1 | |
| C0022 | TOOL RUDDER PEDALS MEASURING | 1 | |
| C0035 | WEAR MEASURING (FLAP DRIVE UNIT) TOOL | 1 | |
| C0036 | WEAR MEASURING (FLAP DRIVE UNIT) TOOL | 1 | |
| C0036B | SET-WEAR MEASURING, FLAP DRIVE NUTS | 1 | |
| C01637453-001GT00-04 | SOCKET, OB, DOGHOUSE LOCKING RING | 1 | |
| C0480-035-0620 | COMPRES. SPRING ¿.480 OD WIRE 0.035 MUSIC WIRE | 1 | |
| C10002-9 | Mooring Equipment - Nose Landing Gear | 9 | |
| C10008-1 | MOORING EQUIPMENT - NOSE LANDING GEAR | 2 | |
| C10008-29 | MOORING EQUIPMENT - NOSE LANDING GEAR | 4 | |
| C10390-1 | ROLLER BEARING SWAGGING TOOL DRILL PRESS | 1 | |
| C12004-6 | BALL SCREW LUBRICATION SPRING ADAPTOR SET | 17 | |
| C12051T-70-2344 | SPRING GUIDE BLOCK | 1 | |
| C17-200 | BYPASS VENT & EXHAUST PLUGS, donut ring folding type (set of 12) | 1 | |
| C2-21883 | MLG SPRING EXPANDER TOOL | 6 | |
| C20195162 | WHEEL AND BEARING PROTECTOR SET (A320 MAIN) YELLOW | 3 | |
| C21941 | BEARING STAND | 1 | |
| C24008-1 | BREAKOUT BOX - P5-13 PROCESSOR PRINTED WIRING ASS | 1 | |
| C24736000 | HYD CONTROL UNIT (FOR STEERING TEST) | 1 | |
| C25 | MULTITIP SOLDERING GUN | 2 | |
| C27-PS-1000 | C27-PS-1000 DESOUTTER STRAIGHT DEBURRING WITH COLLET 4.8MM | 1 | |
| C27005-1 | Assembly Fixture - Elevator Feel and Centering Unit | 1 | |
| C27005-19 | Assembly Fixture - Elevator Feel and Centering Unit | 3 | |
| C27038-6 | LOCK OUT LE CRUISE DEPRESSURING | 22 | |
| C27046-13 | LOCK SET - INBOARD GROUND SPOILER ACTUATOR USED TO HOLD THE INBOARD GROUND SPOILERS IN THE DEPLOYED POSITION DURING GROUND MAINTENANCE. | 26 | |
| C27074-1 | Overhaul Equipment, Spring Stack, Trailing Edge Flap Transmission | 4 | |
| C2752 | HYBRID POLYMER SPRING REWIND15m x 3/8" | 1 | |
| C2753 | HYBRID POLYMER SPRING REWIND 15MX1/2" | 1 | |
| C28013 | PROTECTIVE EQUIPMENT-PROTECTIVE RING FOR LOWER PANEL ACCESS DOOR | 1 | |
| C28013-1 | Protective Equipment -Protective Ring For Lower Wing Panel Access Door | 1 | |
| C28013-19 | 10" × 18" ring middle | 1 | |
| C28013-2 | Protective Equipment - Protective Ring For Lower Wing Panel Access Door | 3 | |
| C28013-3 | Protective Equipment - Protective Ring For Lower Wing Panel Access Door | 12 | |
| C28013-39 | Protective equipment-protective ring for lower wing panel access door | 1 | |
| C28013-4 | PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR LOWER WING PANEL ACCESS DOOR | 6 | |
| C28013-5 | Protective Equipment - Protective Ring For Lower Wing Panel Access Door | 3 | |
| C28013-6 | Protective Equipment - Protective Ring for Lower Wing Panel Access Door | 7 | |
| C28013-7 | PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR LOWER WING PANEL ACCESS DOOR | 3 | |
| C28013-8 | PROTECTIVE EQUIPMENT - PROTECTIVE RING FOR WING LOWER PANEL ACCESS DOORS | 8 | |
| C32000-1 | RING COMPRESSOR NLG INNER CYLINDER | 1 | |
| C32002-1 | RING COMPRESSOR NLG INNER CYLINDER | 12 | |
| C32002-1/2 | RING COMPRESSOR - NLG INNER CYLINDER | 1 | |
| C32002-2 | RING COMPRESSOR - NLG INNER CYLINDER | 1 | |
| C32007-1 | Mandrel, Bearing MLG | 3 | |
| C32009-1 | SWAGING EQUIPMENT - OVERSIZE NOSE GEAR BEARING, UPPER DRAG BRACE | 1 | |
| C32013-1 | Torque Wrench Adapter - Aft Bearing Retainer Nut, Main Landing Gear Trunnion | 16 | |
| C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 8 | |
| C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32014 | SPRING EXTENDER DOWNLOCK NOSE AND MAIN LANDING GEAR | 1 | |
| C32014-1 | Spring Extender - Downlock, Nose and Main Landing Gear | 19 | |
| C32014-19 | SPRING EXTENDER | 1 | |
| C32014-1 | EXPANDER SET - SPRING, MAIN LANDING GEAR, AND NOSE LANDING GEAR | 19 | |
| C32014-2 | SPRING EXTENDER | 5 | |
| C32014-20 | SPRING EXTENDER - DOWNLOCK, NOSE AND MAIN LANDING GEAR | 2 | |
| C32014-20 | EXPANDER SET - SPRING, MAIN LANDING GEAR, AND NOSE LANDING GEAR | 2 | |
| C32014-29 | SPRING EXTENDER - DOWNLOCK, NOSE AND MAIN LANDING GEAR | 5 | |
| C32014-29 | SPRING EXTENDER – DOWNLOCK,NOSE AND MAIN LANDING GEAR | 5 | |
| C32015-1 | MAIN LANDING GEAR FORWARD TRUNNION BEARING ASSEMBLY REMOVAL | 14 | |
| C32016-40 | CENTERING WELDMENT | 1 | |
| C32016-7 | STUFFER - RING SEAL, C32016-7 (INCLUDED IN C32016 KIT) | 4 | |
| C32017 | REPLACEMENT EQPT LWR BEARING SEALS MAIN LANDING GEAR | 1 | |
| C32017-1 | Replacement Equipment - Lower Bearing Seals, Main Landing Gear | 5 | |
| C32017-52 | Replacement Equipment - Lower Bearing Seals, Main Landing Gear | 6 | |
| C32017-53 | Replacement Equipment - Lower Bearing Seals, Main Landing Gear | 16 | |
| C32017-6 | SCRAPER RING GUIDE | 1 | |
| C32017-67 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 5 | |
| C32020-1 | Extension Bar - Functional Test, Nose Landing Gear Steering | 15 | |
| C32020-15 | Extension Bar - Functional Test, Nose Landing Gear Steering | 9 | |
| C32022-1 | RING COMPRESSOR NLG INNE CYLINDER | 5 | |
| C32023-1 | Wrench - Trunnion Spherical Bearing, Main Landing Gear | 10 | |
| C32023-12 | Wrench - Trunnion Spherical Bearing, Main Landing Gear | 11 | |
| C32034-343 | TOOL - ASSISTANCE, FAN BLADE, RETAINING RING | 7 | |
| C32035 | METERING PIN RTNR RING REMjINSTL EQPT. NOSE LANDING GEAR | 1 | |
| C32035-1 | Metering Pin and Retainer Ring Removal/Installation Equipment - Nose Landing Gear | 15 | |
| C32035-11 | RING GUIDE CAP | 1 | |
| C32035-12 | RING GUIDE ROD | 1 | |
| C32035-13 | RING GUIDE END | 1 | |
| C32035-4 | RING GUIDE | 1 | |
| C32035-4-F | RING GUIDE | 1 | |
| C32038 | ROD END BEARING RMVLjINSTL EQPT. ACTUATORS MLG | 1 | |
| C32038-1 | EQUIP BEARING ROD EN | 1 | |
| C32038-55 | Rod End Bearing Removal/Installation Equipment - Actuators Main Landing Gear (MLG) | 6 | |
| C32038-81 | ROD END BEARING REMOVAL/INSTALLATION EQUIPMENT - ACTUATORS MAIN LANDING GEAR (MLG) | 2 | |
| C32039-1 | Adapter - Functional Test, Nose Landing Gear Steering Actuator | 9 | |
| C32040-1 | Spanner Wrench - Nose Landing Gear Steering Collar Retainer | 8 | |
| C32040-6 | Spanner Wrench - Nose Landing Gear Steering Collar Retainer | 22 | |
| C320401 | SPANNER WRENCH - NOSE LANDING GEAR STEERING COLLAR RETAINER | 8 | |
| C32042 | REMjINSTL EQPT. ORIFCE TUBE AND METERING PIN MLG | 1 | |
| C32042-26 | Small retainer Ring holder | 2 | |
| C32042-27 | Large Retainer Ring Holder | 2 | |
| C32042-61 | Removal/Installation Equipment - Orifice Tube and Metering Pin, Main Landing Gear | 12 | |
| C32043-1 | Wrench -Retaining Nut. Nose Landing Gear Steering Valve | 11 | |
| C32043-1-AZL | WRENCH - RETAINING NUT, NOSE LANDING GEAR STEERING VALVE | 1 | |
| C32055-1 | Clamp Assembly - Steering Cables, Nose Landing Gear | 7 | |
| C32055-18 | CLAMP ASSEMBLY - STEERING CABLES, NOSE LANDING GEAR | 8 | |
| C32064-1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 3 | |
| C32067-1 | SPRING EXTENDER - INBOARD SIDE STRUT, MAIN LANDING GEAR | 1 | |
| C32068-1 | SPRING EXTENDER - DOWNLOCK, MAIN LANDING GEAR | 1 | |
| C35003-1 | EQUIPMENT - FIRING PIN RETRACTION, BE AEROSPACE AND AVOX OXYGEN GENERATORS | 5 | |
| C35003-10 | EQUIPMENT - FIRING PIN RETRACTION, BE AEROSPACE AND AVOX OXYGEN GENERATORS | 19 | |
| C35003-20 | EQUIPMENT - FIRING PIN RETRACTION, BE AEROSPACE AND AVOX OXYGEN GENERATORS | 9 | |
| C35004-1 | PLIERS - FIRING PIN RETRACTION, DRAEGER OXYGEN GENERATOR | 9 | |
| C47957 | Pin Wrench for Threaded Ring | 2 | |
| C52001-1 | Holding Fixture - Compressed Spring Cartridge | 4 | |
| C52004 | SPRING-LOADING CONTROL EQPT | 1 | |
| C52004-1 | Spring - Loading Control Equipment | 11 | |
| C52004-1-M | SPRING -0 LOADING CONTROL EQPT | 1 | |
| C52005-1 | Fixture Equipment - Automatic Overwing Exit Door Spring | 4 | |
| C54008-1 | Aft Fairing - Removal and Installation | 6 | |
| C54008-28 | Aft Fairing - Removal and Installation | 7 | |
| C54008-53 | Aft Fairing - Removal and Installation | 8 | |
| C54008-54 | Aft Fairing - Removal and Installation | 8 | |
| C54017-1 | REMOVAL AND INSTALLATION EQUIPMENT - AFT STRUT FAIRING (CE) | 2 | |
| C54017-107 | REMOVAL AND INSTALLATION EQUIPMENT - AFT STRUT FAIRING | 1 | |
| C54017-90 | REMOVAL AND INSTALLATION EQUIPMENT - AFT STRUT FAIRING | 5 | |
| C549688 | Guide Bearing Plate | 1 | |
| C55008-10 | D-RING | 1 | |
| C5DUAL10G-T30 | C5DUAL10G-T30;5800 Dual port 10G 30 Day expiring License | 1 | |
| C651G3005101 | EXTRACTOR FOR SPLINED FLANGE/BEARING | 1 | |
| C651G3006101 | STORAGE FOR SPLINED FLANGE/BEARING | 1 | |
| C652-5929330-1 | AFT ATTENDENT DOOR SPRING WIND TOOL | 1 | |
| C71004-10 | HOIST RING ADAPTER | 5 | |
| C71018-1 | MANUFACTURING OF ALIGNMENT GUIDE-CONE BOLT FORWARD ENGINE MOUNT | 21 | |
| C72001-1 | Indicator Overlay Set -Airborne Vibration Monitoring | 3 | |
| C77004-10 | BOX - TEST, AIRBORNE VIBRATION MONITORING (REQUIRED WITH GENERIC - S360N021-101/-102 - AVM MONITOR ONLY) (737-300/400/50 (THE BOEING COMPANY) | 20 | |
| C78012-14 | TO HOLD OPEN THE THRUST REVERSER COWL DURING ENGINE REMOVAL | 21 | |
| C78043-1 | DRILL JIG - HEAT SHIELD, AFT FAIRING | 1 | |
| C79560 | Q-Spring torque adapter | 1 | |
| CA2910 | SPRING DIA MOYEN 12.2 X DIA FIL 2.2 X LGT 48.9 STEEL | 1 | |
| CAG6850-7 | STANDARD NOZZLE W/ ORING | 1 | |
| CAG6850-9 | EXT NOZZLE SPREADER W/O ORING | 1 | |
| CARB0101 | BEARING RADIUS INSP PROBE: PROBE 0.005" | 1 | |
| CAT4559−1B | Torque Adapter − NLG Ring Nut | 1 | |
| CAT5612-3 | EXTRACTOR TOOL - CLG DRAG BRAKE SPRING P | 1 | |
| CAT5616-12 | 1/2 ROUND RING | 1 | |
| CAT5616-12C | HALF-ROUND RING | 1 | |
| CAT5616-13 | HALF ROUND RING | 1 | |
| CAT5616-13C | HALF-ROUND RING | 1 | |
| CAT5865-7 | HALF ROUND RING | 1 | |
| CAT5917-6-A | MLG SIDEBRACE DOWNLOCK SPRING PULLER KIT | 1 | |
| CAT5944-11 | THE PULLER OF THE LOCK SPRINGS OF THE RELEASED POSITION OF THE STRUT | 1 | |
| CB-21144332-001 | CB-21144332-001;V.36 DTE/DCE Emulation Ring Indicate Cable 72 Inches Long Y Split 12 Inches | 1 | |
| CB-21144332-002 | CB-21144332-002;V.36 DTE/DCE Emulation Ring Indicate Cable 72 Inches Long Y Split 24 Inches | 1 | |
| CBAERO 103 G02 | SEGMENT RING SUPPORT ENGINE HANDLING ASSY | 1 | |
| CBAero 103 G02 | Segment Ring Support Engine Handling Assy | 1 | |
| CBG-18-0-N-1 | MEASUREMENT VERIFICATION CALIBER, MADE OF BASE METAL, USED DURING AIRCRAFT REPAIR. | 3 | |
| CBG-18-1-N-1 | MEASUREMENT VERIFICATION CALIBER, MADE OF BASE METAL, USED DURING AIRCRAFT REPAIR. | 2 | |
| CBR8260-123 | BRUSH AND BEARING CHANGE KIT | 2 | |
| CBR8260-124 | KIT BRUSHES AND BEARINGS CHANGE | 1 | |
| CBSD-16-3-N-1 | STARING DRILL | 1 | |
| CBT2-98 | SPRING HOLDER | 1 | |
| CBTS123N1 | MRO EQUIVALENT COLD WOKRING TOOLS FOR 12-3-N | 1 | |
| CC01-363-USA | U.S.INDUSTRIAL STOP COUNTERSINKS- BEARING TYPE | 1 | |
| CCD | CCD Series Automatically Image Measuring Instrument for Digital Brinell Micro Vickers Hardness Tester | 2 | |
| CE4-1280 | RING HOLDING LPT | 1 | |
| CED14394001 | WIRING DIAGRAM, WOW TEST BOX | 1 | |
| CERPTK7 | SOLDERING TIP FOR R60B 700F | 1 | |
| CERR60C7 | SOLDERING TIP FOR R60B | 1 | |
| CERR60D7 | SOLDERING IRON TIP FOR R60 | 1 | |
| CERT00529189 | 150 WATT SOLDERING PENCIL | 1 | |
| CERWEL6110 | CUTTING TIP SOLDERING 6110 | 1 | |
| CERWEL6120 | SMOOTH TIP SOLDERING 6120 | 1 | |
| CESIC00HM000 | EPDC WIRING TEST BENCH | 1 | |
| CF31CTQAZBM | PANASONIC TOUGH BOOK WITH FOLLOWING ACCESERIES:-(I) 4 PORT USB HUB,SECURING STRAP FOR LAPTOP (II) SPARE BATTERY (III) BATTERY CHARGER. FOR SPARE BATTERY (IV) PRE LOADED WINDOW OS | 1 | |
| CF35190-1LAHAV | DEBBURING TOOL | 1 | |
| CF65B82106 | SPRING CHECKING FIXTURE - LOAD LIMITER ASSEMBLY, AILERON CONTROL | 1 | |
| CG40CB | PULLER SET, BLIND HOLE BEARING | 2 | |
| CG45 | SET, PULLER, BLIND HOLE BEARING | 1 | |
| CG9520008-0001 | RI SPRING ASD ADP | 1 | |
| CGRS861MBW1 | 14.4V INLINE DIE GRING-BAT MB | 1 | |
| CH1057-061 | DUMMY BEARING | 1 | |
| CH137585 | DUMMY BEARING | 1 | |
| CH1543-0040 | SEAL GUIDE FOR O-RING INSTALLATION OF GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| CH1878-0608 | SPRING LOADING TOOL | 1 | |
| CH1878-0608PM | SPRING LOADING TOOL | 1 | |
| CH2100-L-00 | Shoring stay stab load cell | 1 | |
| CH696-057 | DUMMY BEARING | 1 | |
| CH696-058 | DUMMY BEARING | 1 | |
| CH696-059 | DUMMY BEARING | 1 | |
| CH705-225 | DUMMY BEARING | 1 | |
| CH705-226 | DUMMY BEARING | 1 | |
| CH705-244 | DUMMY BEARING | 1 | |
| CH712-172 | DUMMY BEARING | 1 | |
| CH713-125 | STEADY JACK SCREW BEARING | 1 | |
| CH713-171 | DUMMY BEARING | 1 | |
| CHA1878-0608 | Spring Loading Tool | 1 | |
| CHA1878-0705 | Lockring Deforming Tool | 1 | |
| CHA1878-0705PM | LOCKRING DEFORMING TOOL | 1 | |
| CHA1917-0078 | SPRING COMPRESSION TOOL (GOODRICH ACTUATION SYSTEMS ) | 1 | |
| CHA705-283 | GUIDE RING | 1 | |
| CHA723-374 | SPRING HOLDER | 1 | |
| CHECK DIAL TOOL | CHECK DIAL TOOL STAB BEARING | 1 | |
| CID-CONTOURING | Circumferential Inside Diameter Contouring option | 1 | |
| CJ113B110 | BEARING AND NUT ASSMBLY CJ113B | 1 | |
| CJ81D | DIFFERENTIAL SIDE BEARING PULLER | 1 | |
| CJMD332-003 | NOSE GEAR STEERING ADJUST KIT | 1 | |
| CJMD827-005 | TOOL AFTER RUDDER RING PIN | 2 | |
| CJMD832-006 | MAIN LANDING GEAR TRUNNION BEARING REMOVAL TOOL | 2 | |
| CJMDX32-004 | MAIN LANDING GEAR TRUNNION BEARING REMOVAL TOOL | 2 | |
| CL-10-KR | CABLE RING 5/8 (16MM) STEEL BLACK OXIDE | 1 | |
| CL-12-BLPR-2.40 | BALL LOCK PIN ¿3/4 X 2.4ÕÕLG RING HANDLE | 1 | |
| CL-3-BPDR-0.60-S | BALL LOCK PIN D.ACT. RING HANDLE 3/16X0.6 STAINLESS STEEL | 1 | |
| CL-4-BLPR-0.75 | BALL LOCK PIN ¿1/4 X 3/4ÕÕ LG RING HANDLE | 1 | |
| CL-4-BLPR-1.00 | BALL LOCK PIN 1/4 X 1.00Ó RING HANDLE | 1 | |
| CL-4-BLPR-200 | RING-HANDLE BALL LOCK PIN | 1 | |
| CL-4-BPDR-1.00 | DOUBLE ACTING BALL LOCK PIN 1/4 X 1.00 RING HANDLE | 1 | |
| CL-4-BPDR-1.50-S | BALL LOCK PIN D. ACTING RING H. ¿1/4 X 1.5" ST.STEEL | 2 | |
| CL-4-BPDR-2.10 | BALL LOCK PIN 1/4 X 2.10 STEEL RING HANDLE | 1 | |
| CL-6-BLPR-.75 | BALL LOCK PIN 3/8 X 3/4 RING HANDLE STEEL | 1 | |
| CL-9-KR | CABLE RING 9/16 (14&15MM) STEEL BLACK OXIDE | 1 | |
| CLM-10-BLHR-25-S-C | BALL LOCK PIN 100MM X 25MM RING HANDLE STAINLESS WITH CABLE ASSY | 1 | |
| CLM-10-BLPR-30-S | BALL LOCK PIN RING HANDLE ¿M10X30MMLG. ST. STEEL | 1 | |
| CLM-12-BLHR-40-S-C | BALL LOCK PIN 12MM X 40MM RING HANDLE STAINLESS WITH CABLE ASSY | 1 | |
| CLM-8-BLHR-10-S-C | BALL LOCK PIN 8MM X 10MM RING HANDLE WITH CABLE ASSY | 1 | |
| CM35E | RETAINING RING M35 DIN 471 | 1 | |
| CMST22036RB | 20-IN WIDE 3 DRAWER METAL TOOL BOX WITH BALL-BEARING DRAWERS | 1 | |
| CNT6521 | SPRING TYPE DIVIDER | 2 | |
| CO148-023-0250M | COMPRESSION SPRING ¿4mmODX6mmLG MADE FROM 1" | 1 | |
| COD-CONTOURING | Circumferential Outside Diameter Contouring option | 1 | |
| COM-7293 | PICK O-RING, 90 DEGREE TIP | 1 | |
| COMMERCIAL/ BHT-412-CR&O FIGURE 64-5 | TAIL ROTOR TRUNNION CENTERING WORKAID | 1 | |
| CP-13 | BURR-OFF,DEBURRING TOOL,RANGE .203-.219",SHANK D | 2 | |
| CP-15 | BURR-OFF,DEBURRING TOOL,RANGE .234-.250",SHANK D | 2 | |
| CP-19 | DEBURRING TOOL CLOTHESPIN | 1 | |
| CP15036 | DRING SHAFT | 1 | |
| CP30379/8 | HANDLING ADAPTOR - FAN CASE - STRONG RING - RB211-535C & E4 | 2 | |
| CP30501/9 | CRADLE RB211-535 (C/W ALL ENG.TRUNNIONS & STRONG RING HANDL.ADAPTORS) | 2 | |
| CP30550-1 | HANDLING ADAPTOR REAR SUSPENSION RING FLIGH STAND RB211-535 | 1 | |
| CP30550/1 | HANDLING ADAPTOR REAR SUSPENSION RING FLIGH STAND RB211-535 | 1 | |
| CP30612 | JACKING ADAPTOR REAR SUPPOR RING | 1 | |
| CP30764/1 | EQUIPMENT - HANDLING, FUEL PUMP AND METERING UNIT | 1 | |
| CPN913-3279-170 | NOISE FILTERING DURING TESTING | 1 | |
| CPWA-30441 | Fixture – Loading #1 Bearing | 1 | |
| CPWA-30661 | Drift – Bearing | 1 | |
| CPWA-30667 | Drift – Bearing | 1 | |
| CPWA-30668 | Drift – Bearing | 1 | |
| CPWA-30692 | Drift – Bearing | 1 | |
| CS-710-147 | SPECIAL TOOLS A330 CS-710-147 MEASURING BONDING POSITION TOOL | 1 | |
| CS110-BCL | BACK CAP LONG INCLUDES 98W77 O-RING | 1 | |
| CS110-BCM | BACK CAP MEDIUM INCLUDES 98W77 O-RING | 1 | |
| CSP1/16X1-SS | COILED SPRING PIN 1/16 X 1 STD DUTY STAINLESS | 1 | |
| CSP3/16X1-S | COILED SPRING PIN 3/16 X 1 STEEL | 1 | |
| CSPM2.5X14-S | COILED SPRING PIN M2.5 X 14 STEEL | 1 | |
| CT-857B | LEAD FREE COMBINATION SOLDERING STATION | 1 | |
| CT492 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 5 | |
| CT780034-501 | Assy Wrench, Blocker Door Bearing | 1 | |
| CT780049 | Bearing Blk, Trunnion, C N A Workstand | 1 | |
| CTINF9010-3-1 | LED W/WIRING | 1 | |
| CTLSH861-10 | DETENT SPRING | 1 | |
| CTR825-119 | LED RING | 1 | |
| CTRS4850-15 | DEEP GROOVE BALL BEARING. | 1 | |
| CTRS4850-18 | NEEDLE ROLLER BEARING. | 1 | |
| CTSG861 | 14.4V SOLDERING GUN | 1 | |
| CTSG861DB | 14.4V SOLDERING GUN DB | 1 | |
| CTSG861TIPKIT | SOLDERING TIPS AND HOLDER KIT | 1 | |
| CTWR | SHORING LOAD CELL | 1 | |
| CV-2000 | PROFILOMETER (CONTOUR MEASURING INSTRUMENTS) MITUTOYO MOD. CV-2000 | 1 | |
| CXRPC135012A | SPRING REWIND POWR CORDED REEL | 1 | |
| D-4000 | FEDERAL DIMENSION AIR GAGE ( WITH SETTING RING ADN AIR PLUG) OR EQUIVALENT 1.1268 SETTING RING 1.1268 AIR PLUG | 1 | |
| D-74953-118000 | IAI-STD-TD RING-5IN-2 NOTCH -STL | 1 | |
| D-74954-118000 | IAI-TD RING PROBE-STL-5 IN-TF-500K-1M | 1 | |
| D0060 | T-Handle Backplate Steering Unit | 1 | |
| D00604C1B1A01A0 | Engine Shoring Cradle Jack | 1 | |
| D0062 | Torque Adapter Steering Unit | 1 | |
| D12240 | METRIC COMP SPRING 11.25 OD X 1.25 WIRE X 93.5 LG | 1 | |
| D12530-001 | #3-#6 DEBURRING TOOL SIZES | 9 | |
| D12800 | SPRING 58MM FREE LENGTH 2MM WIRE DIA X 27MM OD | 1 | |
| D21846-1000 | DISK CENTERING TOOL | 1 | |
| D21852-1000 | EXTRACTOR FOR BEARING CUP - INNER HALF-WHEEL SIDE | 5 | |
| D23156000 | STEERING BYPASS PIN ENGRAVED | 34 | |
| D2727025001000 | ROD-SPRING | 1 | |
| D46231 | STORING DEVICE | 1 | |
| D46463 | MLG SIDE BEARING TOOL | 1 | |
| D46477 | ADAPTER FOR COMPRESSING SPRING | 1 | |
| D46969 | ADAPTER BEARING MLG | 6 | |
| D5285875200000A | DOOR ASSY-HINGED FAIRING (LH) | 1 | |
| D5945 | SPACER, FEEDBACK RING HOLDER(MCCAULEY) (QTY: 3) | 4 | |
| D61703 | GUIDE # UPPER BEARING, NLG | 1 | |
| D650 | INDUSTRIAL SOLDERING GUN | 1 | |
| D651P0001101 | TDRS BEARING INSTL SET | 1 | |
| D651P0001951 | TAIL ROTOR DRIVE SHAFT BEARINGS TOOL SET | 1 | |
| D65235-1 | CYLINDER, STEERING | 1 | |
| D9849 | DEBURRING TOOL | 5 | |
| D9849- 15 | DEBURRING TOOL | 4 | |
| D9849-15 | DEBURRING TOOL | 4 | |
| D9850 | DEBURRING TOOL | 3 | |
| D9850-13-08 | DEBURRING TOOL STEM | 2 | |
| D9850-13-10 | DEBURRING TOOL STEM | 1 | |
| D9850-13-12 | DE-BURRING TOOL | 6 | |
| D9850-14 | DEBURRING TOOL 8-12 | 2 | |
| D9851 | DEBURRING TOOL | 3 | |
| D9851-13-04 | STEM, DEBURRING TOOL, TUBE SIZE 04 | 2 | |
| D9851-13-06 | DEBURRING TOOL | 2 | |
| D9851-14 | DEBURRING TOOL 4--6 | 2 | |
| DAH601788 | ADAPTOR,BEARING TORQUE | 1 | |
| DAN239-09 | SPRING-DISC | 1 | |
| DAPT02-0071-00 | BLADE BEARING TRANSPORT CLAMP | 1 | |
| DAPT02-0071−00 | BLADE BEARING TRANSPORT CLAMP | 1 | |
| DAPT02−0071−00 | BLADE BEARING TRANSPORT CLAMP | 1 | |
| DAPT60-0039-00 | BEARING AND SEAL RETAINER | 1 | |
| DAPT60-0115-00 | WRENCH AND SPANNER BEARING | 10 | |
| DAPT60-0116-00 | WRENCH AND SPANNER RING NUT | 6 | |
| DAPT60-0188-00 | BEARING WRENCH (ALTERNATIVE TO DAPT60-0115-00) | 8 | |
| DAPT60-0197-00 | BEARING DICE ASSEMBLY TOOL | 3 | |
| DAPT60-0223-00 | BLADE RING RETAINERS | 7 | |
| DAPT60-0392-00 | BEARING OUTER RACE PISTON KIT (DISASSEMBLY) | 1 | |
| DAPT60-0392-00-IAS | DOWTY PROP BEARING FIXTURE Q400 | 1 | |
| DAPT60-0393-00 | SUPPORT RING DOWTY | 2 | |
| DAPT60-0393-00-IAS | SUPPORT RING DOWTY | 1 | |
| DAPT60-0400-00 | RING NUT WRENCH (ALTERNATIVE TO DAPT60-0116-00) | 7 | |
| DAPT60-0400-02-IAS | Ring nut Spanner Dog tooth | 1 | |
| DAPT60−0115−00 | PROP BLADE BEARING WRENCH | 10 | |
| DAPT60−0116−00 | PROP BLADE RING NUT | 6 | |
| DAPT65-0108-00 | INBOARD BEARING ASSY TOOL (PULLER) | 6 | |
| DAPT65-0108-00-IAS | INBD BEARING ASSY TOOL | 1 | |
| DAPT69-0046-00 | OUTBOARD BEARING PULLER KIT | 1 | |
| DAS-25106-13 | SIZING RING,SEAL,HYDRAULIC ACTUATOR | 1 | |
| DAS2119-4 | RING, BRAKE MOD | 1 | |
| DBS-101 | 5 PIECE DEBURRING SET | 1 | |
| DCM1589-1 | TOOL,DOWNLOCK SPRING INSTL/RMVL-NLG/MLG | 1 | |
| DCM1589-1 | TOOL,DOWNLOCK SPRING INSTL/RMVL-NLG/MLG | 1 | |
| DDSET-4PC | 4 PIECE 'SPRING-BACK' DIMPLE DIE KIT | 1 | |
| DEBUR300 | Deburring Tool | 1 | |
| DEBURR | DE-BURRING TOOL | 1 | |
| DEL-081-0069-5 | Battery Tender 081-0069-6 Ring Terminal Harness | 2 | |
| DG-200 | MECHANICAL MANUAL MEASURING DEVICE | 11 | |
| DG200 | MECHANICAL MANUAL MEASURING DEVICE | 11 | |
| DH5 | ROTARING UNIT PRECISION ANGULAR INDEXING TEST BENCH | 1 | |
| DHS1650B | O-RING HYDRAULIC PUMP INSTALLATION | 5 | |
| DIK51-00 | DENT MEASURING KIT | 1 | |
| DIN6303-M12 | KNURLED RING NUT | 1 | |
| DJS-28307 | Bearing Driver | 1 | |
| DJS-40511 | Seal Wear Ring Driver | 1 | |
| DJS-6318 | Bearing Driver | 1 | |
| DJS6318 | BEARING DRIVER | 1 | |
| DL-01 | DATALOGGER FOR TEMPERATURE AND HUMIDITY MONITORING | 1 | |
| DLR25 | RETAINING RING FOR .25" DIA | 1 | |
| DLR50 | RETAINING RING FOR .500" DIA | 1 | |
| DLS-19929 | Bearing Driver | 1 | |
| DLS19929 | BEARING DRIVER | 1 | |
| DMC102 | DMC102 - MIL-T-83507/16-01 Maintenance Kit for Electrical Connectors and Wiring Systems | 2 | |
| DMC1020-1 | DMC1020-1 CASA CN-235 Wiring System Maintenance Kit | 2 | |
| DMC1060 | DMC1060 Learjet 60 Wiring System Maintenance Kit | 2 | |
| DMC106A | TOOL KIT - TCAS CONNECTOR SERVICE, UNIVERSAL (HONEYWELL / COLLINS / L3 COMMUNICATIONS TCAS SYSTEMS) (DANIELS MANUFACTURING CORPORATION) | 1 | |
| DMC1126 | DMC1126 Wiring System Maintenance Kit for the BAE Jetstream 31/32/41 Aircraft | 2 | |
| DMC1127 | Canadair CL-604 Wiring System Maintenance Kit | 3 | |
| DMC1149 | DMC1149 General Purpose Maintenance Kit for Electrical Connectors and Wiring Systems | 2 | |
| DMC1165 | Lear 25, 31A, 35, 55 and 60 Wiring System Maintenance Kit | 2 | |
| DMC1186 | DMC1186 - AF8 (M22520/1-01) Tool Kit for Electrical Connectors and Wiring Systems | 4 | |
| DMC1220 | DMC1220- C-130H Wiring System Maintenance Kit | 4 | |
| DMC123 | DMC123 - MIL-T-83507/8-01 Maintenance Kit for Electrical Connectors and Wiring Systems | 5 | |
| DMC1246 | Cessna Citation X Model 750 Wiring System Maintenance Kit | 2 | |
| DMC1253 | DMC1253 Gulfstream V G500/G550 Wiring System Maintenance Kit | 5 | |
| DMC1264 | DMC1264 Boeing 737 Next Generation 737-600/-700/-800/-900/BBJ Wiring System Maintenance Kit | 7 | |
| DMC1278 | DMC1278 Embraer ERJ-145 Wiring System Maintenance Kit | 4 | |
| DMC1280 | DMC1280 Airbus H135 (Eurocopter EC135) Maintenance Kit for Electrical Connectors and Wiring Systems | 2 | |
| DMC1293 | DMC1293 Learjet 40/45 Wiring System Maintenance Kit | 4 | |
| DMC1318 | DMC1318 Dassault Falcon 50EX Wiring System Maintenance Kit | 2 | |
| DMC1352 | DMC1352 Beechcraft King Air 350 Wiring System Service Kit | 3 | |
| DMC1354 | DMC1354 Bell 412 SP Wiring System Maintenance Kit | 2 | |
| DMC1362MOD1 | DMC1362MOD1 C-130J Wiring System Maintenance Kit | 2 | |
| DMC1362MOD1R | DMC1362MOD1R C-130J Wiring System Maintenance Kit | 2 | |
| DMC1384 | DMC1384 Bombardier (De Havilland) Dash 8 Q400 Wiring System Maintenance Kit | 7 | |
| DMC1390 | Wiring System Maintenance Kit for the Airbus A320, A333, A340, Bombardier Challenger CL-604, Gulfstream GV, Learjet 60 | 2 | |
| DMC1417 | DMC1417 - Kaman SH-2G Wiring System Maintenance Kit | 2 | |
| DMC1430 | DMC1430 Wiring System Maintenance Kit for the Pilatus PC-12 | 2 | |
| DMC1444R | DMC1444R F-16 Wiring System Service Kit | 1 | |
| DMC1481 | DMC1481 MH-60S Aircraft Platform Wiring System Maintenance Kit | 2 | |
| DMC1521 | DMC1521 Embraer E170/E175/E190/E195 Wiring System Maintenance Kit | 8 | |
| DMC1535 | DMC1535 Light Armored Vehicle LAV-25 & LAV-AT Wiring System Maintenance Kit | 2 | |
| DMC1570 | DMC1570 Embraer EMB-314 Super Tucano Wiring System Maintenance Kit | 2 | |
| DMC1579 | McDonnell Douglas DC-8, DC-9, DC-10 & Boeing 757 Wiring System Maintenance Kit | 2 | |
| DMC1582B | DMC1582B Stryker IAV (ICV, MGS, RV, MCV-B, CV, FSV, ESV, MEV, ATGM, NBC RV) Wiring System Maintenance Kit | 2 | |
| DMC1589 | DMC1589 Sikorsky S-92 Wiring System Maintenance Kit | 2 | |
| DMC1591 | DMC1591 Bombardier CRJ 700/900/900 GLS Wiring System Service Kit | 2 | |
| DMC169A | DMC169A - HX4 Tool & Die Sets for Electrical Connectors and Wiring Systems - M83521/7-01 | 2 | |
| DMC1700C | DMC1700C F-35 Lightning II (JSF) Wiring System Maintenance Kit | 2 | |
| DMC1700D | DMC1700D Wiring System Service Kit for Lockheed Martin F-35 Lightning II (Joint Strike Fighter) | 1 | |
| DMC17A | DMC17A C-17 Wiring System Maintenance Kit | 2 | |
| DMC1804MOD1 | DMC1804MOD1 Boeing 777, 767, & 757 Wiring System Maintenance Kit | 1 | |
| DMC1807 | DMC1807 Airbus A319 Wiring Service Maintenance Kit | 2 | |
| DMC1808 | DMC1808 Airbus H145/Eurocopter EC145 Wiring System Service Kit | 2 | |
| DMC1851 | Bombardier Challenger 300 Wiring System Maintenance Kit | 3 | |
| DMC189 | DMC189 Wiring System Service Kit for the F-28 Fokker Aircraft | 3 | |
| DMC1898 | DMC1898- Gulfstream G650 Wiring System Service Kit | 2 | |
| DMC1924 | DMC1924 - Circular Ring Plier Kit | 2 | |
| DMC197 | DMC197 - Gulfstream II Wiring System Maintenance Kit | 2 | |
| DMC1973 | DMC1973 Agusta Westland AW139 and AW169 Wiring System Maintenance Kit | 2 | |
| DMC1999 | DMC1999 Bombardier C Series/Airbus ACJ220 Wiring System Maintenance Kit | 2 | |
| DMC1999R | DMC1999R Bombardier C Series/Airbus ACJ220 Wiring System Service Kit | 2 | |
| DMC201MOD1 | DMC201MOD1 Boeing 747 & 747SP Wiring System Maintenance Kit | 4 | |
| DMC2022 | DMC2022 Wiring System Service Kit for the Sikorsky CH-60/HH-60M/MH-60R/UH-60M | 1 | |
| DMC2038R | DMC2038R USAF Advanced Wiring Training Kit | 2 | |
| DMC204 | DMC204 Learjet 35 Wiring System Maintenance Kit | 3 | |
| DMC205 | DMC205 Wiring System Maintenance Kit for the Cessna Citation I and II Aircraft | 4 | |
| DMC205-1 | DMC205-1 Cessna Citation I, II, and III Wiring System Maintenance Kit | 5 | |
| DMC2105 | Bombardier Global 6000 Wiring System Service Kit | 1 | |
| DMC2119 | DMC2119 KC-46A Boeing Pegasus Wiring System Service Kit | 2 | |
| DMC2155 | DMC2155 KC-46A Boeing Pegasus Wiring System Maintenance Kit | 2 | |
| DMC2159 | The DMC2159 - Piper Aircraft Wiring System Maintenance Kit | 2 | |
| DMC216 | DMC216 Lockheed F-16 Wiring System Maintenance Kit | 4 | |
| DMC216WP | DMC216WP Wiring System Maintenance Kit for the F-16 Wright-Patterson Version | 2 | |
| DMC2200 | DMC2200 Dassault Falcon Jet 7X/8X Wiring System Maintenance Kit | 2 | |
| DMC2204 | DMC2204 Autosport (TE/Deutsch) Wiring System Maintenance Kit | 2 | |
| DMC2206 | DMC2206 - Bombardier Global 7500 Wiring System Maintenance Kit | 2 | |
| DMC221MOD1 | DMC221MOD1 Wiring System Service Kit for the Boeing 707, 727, 737-200, 747 & 747SP Aircraft | 4 | |
| DMC2232 | Bombardier Challenger 300/350 Wiring System Maintenance Kit | 2 | |
| DMC2268 | DMC2268 Wiring System Service Kit for Airbus H130 | 2 | |
| DMC2269 | DMC2269 Bell 407GX Wiring System Service Kit | 2 | |
| DMC2271 | DMC2271 Wiring System Service Kit for F-16 Block 70 & All Prior Variants | 2 | |
| DMC2275 | DMC2275 MH-65E Wiring System Maintenance Kit | 2 | |
| DMC2275R | DMC2275R MH-65E Wiring System Service Kit | 2 | |
| DMC2276 | DMC2276 Bell 429 Wiring System Maintenance Kit | 2 | |
| DMC2280 | DMC2280 High Speed Data Wiring System Maintenance Tool Kit | 1 | |
| DMC2323 | DMC2323 Cessna Citation XLS Wiring System Maintenance Kit | 2 | |
| DMC2327 | DMC2327 Wiring System Service Kit for the Cessna 172 Skyhawk | 2 | |
| DMC2329 | DMC2329 Wiring System Service Kit for the Cessna Grand Caravan 208/Grand/Grand EX | 2 | |
| DMC2331 | DMC2331 Cessna 182 Skylane Wiring System Maintenance Kit | 2 | |
| DMC2333 | DMC2333 Cessna Turbo Stationair Wiring System Maintenance Kit | 2 | |
| DMC239F | DMC239F A-10A/A-10C Wiring System Maintenance Kit | 2 | |
| DMC260 | DMC260 Cessna Citation V Model 560 Wiring System Maintenance Kit | 2 | |
| DMC262 | DMC262 McDonnell Douglas DC8, DC9, DC10 Wiring System Maintenance Kit | 5 | |
| DMC274 | DMC274 AFM8 (M22520/2-01) Tool Kit for Electrical Connectors and Wiring Systems | 4 | |
| DMC283 | DMC283 - AF8 (M22520/1-01) Tool Kit For Electrical Connectors and Wiring Systems | 2 | |
| DMC286-01 | DMC286-01 - General Aviation Maintenance Kit for Electrical Connectors and Wiring Systems | 2 | |
| DMC286-02 | DMC286-02 General Aviation Maintenance Kit for Electrical Connectors and Wiring Systems | 5 | |
| DMC30 | DMC30 Airbus A300, A310, A320, A330, & A340 Wiring System Service Kit | 4 | |
| DMC315A | DMC315A Bombardier (Canadair) Challenger CL-600, CL-601, CL-601-3A, CL-601-3R Aircraft Wiring System Maintenance Kit | 3 | |
| DMC333 | DMC333 Airbus A300 & A310 Wiring System Service Kit | 4 | |
| DMC346 | DMC346 Wiring System Service Kit for the DeHavilland Dash 7 Aircraft | 2 | |
| DMC378 | DMC378 Wiring System Service Kit for the Sikorsky S-76 Helicopter | 2 | |
| DMC40 | DMC40 Dassault Falcon 10,100,20,200,50 & 900 Wiring System Maintenance Kit | 2 | |
| DMC441 | DMC441 BELL 206/206L Wiring System Maintenance Kit | 4 | |
| DMC491 | DMC491 Bell 212/412 Wiring System Maintenance Kit | 4 | |
| DMC498-1003 | DMC498-1003 F/A-18 McDonnell Douglas Wiring System Maintenance Kit | 2 | |
| DMC5000 | MAINTENANCE KIT FOR ELECTRICAL CONNECTORS AND WIRING SYSTEMS. TOOL KIT CONTAINING AF8, AFM8, AND HX4 TOOLS AND ALL MIL-SPEC QUALIFIED POSITIONERS, TURRETS, AND DIE SETS (DMC5000 SERIES) | 1 | |
| DMC519 | DMC519 Airbus A318, A319, A320, A321, A330, A340 Wiring System Maintenance Kit | 11 | |
| DMC567MOD1 | DMC567MOD1 Boeing 757 & 767 Wiring System Maintenance Kit | 3 | |
| DMC584 | DMC584- Bombardier CRJ100/200/200 GLS Wiring System Maintenance Kit | 6 | |
| DMC603 | DMC603- MD500E & MD530F Wiring System Maintenance Kit | 5 | |
| DMC635 | DMC635 SAAB 340 Wiring System Maintenance Kit | 4 | |
| DMC684 | DMC684 BAE 146 Wiring System Service Kit | 3 | |
| DMC714A | DMC714A - Wiring System Service Kit for MIL-STD-1760 Electrical Interconnection Systems | 3 | |
| DMC723 | DMC723 Boeing CH-47D Chinook Wiring System Maintenance Kit | 3 | |
| DMC728 | DMC728 BAE Hawk Wiring System Maintenance Kit | 3 | |
| DMC737 | DMC737 Bell Helicopter Wiring System Maintenance Kit | 4 | |
| DMC769 | DMC - Wiring System Maintenance Kit - REPAIR SET - CRIMP | 7 | |
| DMC787 | DMC787 Sikorsky S-70 Wiring System Maintenance Kit | 4 | |
| DMC80 | WIRING SYSTEM SERVICE KIT FOR THE MCDONNEL DOUGLAS MD-80 | 3 | |
| DMC800 | DMC MAINTENANCE KITS - TOTAL SUPPORT FOR HIGH RELIABILITY WIRING SYSTEMS | 3 | |
| DMC839 | DMC839 FOKKER F50/F100 Wiring System Maintenance Kit | 6 | |
| DMC852 | DMC852- LEARJET 25, 35, & 55 Wiring System Maintanance Kit | 4 | |
| DMC871 | DMC871 GULFSTREAM III & IV Wiring System Maintenance Kit | 4 | |
| DMC872MOD1 | WIRING TOOL KIT DASH 8 | 6 | |
| DMC899-2 | MAINTENANCE KIT FOR ELECTRICAL CONNECTORS AND WIRING SYSTEMS | 6 | |
| DMC919 | DMC919 Wiring System Maintenance Kit for KC-135R | 1 | |
| DMC940 | DMC940 Eurocopter AS332 Super Puma/Airbus H215/SA 330 Puma Wiring System Maintenance Kit | 2 | |
| DMC975 | MD-11 Wiring System Maintenance Kit | 1 | |
| DMC977 | DMC977 Boeing 777 Wiring System Maintenance Kit | 4 | |
| DMS-10345 | Bearing Driver | 1 | |
| DMS-18105 | Bearing Driver | 1 | |
| DMS-18580 | Bearing Driver | 1 | |
| DMS-18583 | Bearing Driver | 1 | |
| DMS-18586 | Bearing Driver | 1 | |
| DMS-27024 | DRIVER, BEARING | 2 | |
| DMS-34186 | DRIVER, BEARING | 2 | |
| DMS-37186 (AGE10168) | Bearing Driver | 1 | |
| DMS-37892 | Seal Wear Ring Driver | 1 | |
| DMS-37893 | Bearing Journal Drive | 1 | |
| DMS-40510 | Bearing Journal Drive | 1 | |
| DMS-4784 | Bearing Driver | 1 | |
| DMS18580 | BEARING DRIVER | 1 | |
| DMS18583 | BEARING DRIVER | 1 | |
| DMS18586 | BEARING DRIVER | 1 | |
| DMS24695 | BEARING DRIVER | 1 | |
| DMS2583 | BEARING DRIVER | 1 | |
| DMS34695 | BEARING DRIVER | 1 | |
| DMS34696 | BEARING DRIVER | 1 | |
| DMS34697 | BEARING DRIVER | 1 | |
| DMS35080 | BEARING DRIVER | 1 | |
| DMS35239 | BEARING DRIVER | 1 | |
| DO7010 | RESISTANCE METERING EQUIPMENT WITHOUT DEVICE | 5 | |
| DPPH | SPRING SCALE, 50 - 250 POUNDS (22.68 - 113.4 KG) | 1 | |
| DPPH-150 | SCALE - SPRING, 0-150 POUNDS, WITH HOOK AND PAD ADAPTER KIT | 3 | |
| DPPH200 | PUSH PULL DIAL GAUGE (SPRING SCAIE) | 1 | |
| DPPH50 | SPRING W/HOOK AND ADAPTER | 2 | |
| DRP13 | DANIELS MANUF CORP DRP13 BACKSHELL ASSEMBLY PLIERS, CIRCULAR RING, 0.85" TO 0.88" GRIP, RED | 2 | |
| DRT67520 | TESTER, SIDE STAY SPRING | 1 | |
| DRT68003 | SIDESTAY COMPRESSION SPRING REMOVAL TOOL | 13 | |
| DRT68006 | SPRING-EXPANDER | 11 | |
| DRT68006 | SPRING EXPENDER | 11 | |
| DRT68080 | PAD-MEASURING | 1 | |
| DRT69426 | SPRING EXPANDER | 5 | |
| DRT69428 | Spring Expander | 1 | |
| DS08 | #8 Spring Drill Stop | 1 | |
| DS1/4 | 1/4" Spring Drill Stop | 1 | |
| DS10 | #10 Spring Drill Stop | 1 | |
| DS13 | #13 Spring Drill Stop | 1 | |
| DS16 | #16 Spring Drill Stop | 1 | |
| DS21 | #21 Spring Drill Stop | 1 | |
| DS27 | #27 Spring Drill Stop | 1 | |
| DS30 | #30 Spring Drill Stop | 1 | |
| DS40 | #40 Spring Drill Stop | 1 | |
| DS5/16 | 5/16" Spring Drill Stop | 1 | |
| DS50 | #50 Spring Drill Stop | 1 | |
| DS7/32 | 7/32" Spring Drill Stop | 1 | |
| DSC4-3A | BEARING ROD END (ELEVATOR) | 1 | |
| DSK20999N02-001 | NLG AUXILIARY DOWNLOCK SPRING PULLER | 3 | |
| DSK20999N04-001 | NOSE LANDING GEAR DOOR SPRING PULLER | 4 | |
| DSNM-1/4 | 1/4" "NO-MAR" Spring Drill Stop with Plastic Nose Piece | 1 | |
| DSNM-10 | #10 "NO-MAR" Spring Drill Stop with Plastic Nose Piece | 1 | |
| DSNM-21 | #21 "NO-MAR" Spring Drill Stop with Plastic Nose Piece | 1 | |
| DSNM-30 | #30 "NO-MAR" Spring Drill Stop with Plastic Nose Piece | 1 | |
| DSNM-40 | #40 "NO-MAR" Spring Drill Stop with Plastic Nose Piece | 1 | |
| DSS2000 | DOMESTIC CURING KIT | 1 | |
| DSS2020 | KIT - CURING, WINDSHIELD (BLANKET) | 2 | |
| DSS2021 | KIT - CURING, WINDSHIELD (BLANKET) | 1 | |
| DSS5100 | DEVICE, SURFACE CURING SYSTEM, RRC | 1 | |
| DSS5105 | DEVICE, SURFACE CURING SYSTEM, RRC | 2 | |
| DZZ0015-1 | VANE SPRING CARTRIDGE TESTER | 1 | |
| DZZ0019-501 | Flap Bearing T/Adapt | 1 | |
| DZZ7074-1 | Guide-MLG strut bearing instl | 4 | |
| DZZ7084-63 | NLG steering index pin assy | 1 | |
| DZZ7130-1 | NLG LOWER BEARING GUIDE | 3 | |
| DZZ7138-1 | NOSE L/G UPPER BEARING GUIDE | 3 | |
| DZZ7179-503 | 1.ASSEMBLY - BEARING (DZZ7179-201 INCLUDED INDZZ7179-503) | 1 | |
| DZZ7191-1 | GUIDE – CLG PISTON UPPER BEARING SUPERSEDED BY -505 | 1 | |
| DZZ7194-1 | CTR L/G PISTON UPPER BEARING GUIDE | 1 | |
| DZZ7195-1 | CTR L/G PISTON LOWER BEARING GUIDE | 5 | |
| DZZ7278-1 | ARB Petal Door Spring Keeper | 1 | |
| DZZ7280-1 | MLG BEARING TORQUE ADAPTER | 1 | |
| DZZ7297-1 | CLG LOWER BEARING TORQUE ADAPTER | 1 | |
| DZZ7556 | WIRING DIAGRAM | 1 | |
| DZZ7619 | WIRING DIAGRAM | 1 | |
| DZZ7667 | WIRING DIAGRAM | 1 | |
| Drill centering guide | Drill centering guide | 1 | |
| E 51417 | SPRING ASSEMBLY & DISASSEMBLY FIXTURE | 1 | |
| E15464 | DRIVE FLANGE BEARING INSTALLAT | 1 | |
| E162-100 | ROTOR HUB COVER (teardrop shaped swash plate fairing) | 1 | |
| E162-101 | ROTOR HUB COVER (round shaped swash plate fairing) | 1 | |
| E2J57670 | HANDLING RING | 1 | |
| E2J57670-1 | HANDLING RING | 1 | |
| E2J57671 | Adapter Ring | 1 | |
| E2J57671-1 | HANDLING RING | 1 | |
| E2J65333 | GUIDE - POSITION, SEAL RINGS. | 3 | |
| E53-002A | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler = .040"..Filler = .031"..Stringer = .063" | 1 | |
| E53-002B | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler = .050"..Filler = .047"..Stringer = .063" | 1 | |
| E53-002C | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler = .063"..Filler = .055"..Stringer = .063" | 1 | |
| E53-002D | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler = .080"..Filler = .071"..Stringer = .063" | 1 | |
| E53-002E | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler = .098"..Filler = .080"..Stringer = .063" | 1 | |
| E53-002F | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler = .110"..Filler = .098"..Stringer = .063" | 1 | |
| E71516-00 | PLIERS - RETRACTION, OXYGEN GENERATOR FIRING PIN (APPLICABLE: FOR DRAGER OXYGEN GENERATORS ONLY) SEE: 777-SL-35-003-A, (DRAEGER AEROSPACE GMBH) | 12 | |
| E9-HS-MON-UPG | E9-HS-MON-UPG;OTU or FTH HIGH SENSITIVITY MONITORING LICENSE UPGRADE | 1 | |
| E9-ONMS-MONITOR-UPG | E9-ONMS-MONITOR-UPG;OTU or FTH ONMSI MONITORING LICENSE UPGRADE | 1 | |
| E9-PEAK-MON-UPG | E9-PEAK-MON-UPG;OTU or FTH SMARTOTU PEAK MONITORING LICENSE UPGRADE | 1 | |
| E9-UF-MON-UPG | E9-UF-MON-UPG;OTU or FTH ULTRA FAST MONITORING LICENSE UPGRADE | 1 | |
| E9E-5K-4W-C-LU-VZW | E9E-5K-4W-C-LU-VZW;4xWDM Combiners for Rings - VZW | 1 | |
| E9E-MON-OEM-UPG | E9E-MON-OEM-UPG;OTU5000 OEM FOR MONITORING APPLICATION - SMARTOTU OPTION - UPGRADE | 1 | |
| E9E-PON-MON | E9E-PON-MON;OTU5000 PON MONITORING AND TEST SOFTWARE OPTION | 1 | |
| E9E-PON-MON-UPG | E9E-PON-MON-UPG;OTU5000 PON MONITORING AND TEST SOFTWARE OPTION -UPGRADE- | 1 | |
| E9E-SPARE-KC-RT | E9E-SPARE-KC-RT;SPARE KEYING CAP AND RING TONGUE FOR OTU-5000 | 1 | |
| E9I-ONMS-UPG-VZW | E9I-ONMS-UPG-VZW;ONMSI Upgrade for Rings - VZW | 1 | |
| EAK0256J71A | MEASURING KIT-RIDE HEIGHT | 1 | |
| EAM0048G78A | SPRING PEDAL SWITCH (16103) | 1 | |
| EC1108 | CIRCUIT CARD: FIRING, | 1 | |
| ECARM058-7 | SPRING CONTACT BOARD | 1 | |
| ECLM703 | HANDLE: EMERGENCY LOWERING, | 2 | |
| ECPNA021-9 | SPRING AND INSULATING SLEEVE | 1 | |
| ECSPF032-16 | INDEXER FRICTION RING PAIR BLK | 1 | |
| EDFOS-MO-RATE | EDFOS-MO-RATE;RENT DTSS -BOTDR- PACK DURING ONE MONTH | 1 | |
| EDFOS-ONMSI-SW | EDFOS-ONMSI-SW;TEMPERATURE AND STRAIN MONITORING UNDER ONMSI SW | 1 | |
| EDFOS-WK-RATE | EDFOS-WK-RATE;RENT DTSS -BOTDR- PACK DURING ONE WEEK | 1 | |
| EDM900L | Engine Data Monitoring Display / Jpi | 1 | |
| EEFI50020 | O RING ADAPTOR 16 MM. | 1 | |
| EEFI50021 | O RING ADAPTOR 11 MM. | 1 | |
| EEFI5CL-3 | 5PK O-RING 3/4IN I.D.X1IN OD | 1 | |
| EHF-4100 | HIGH FREQ SOLDERING IRON | 1 | |
| EI1566 | METERING EQUIPMENT-BIOCIDE-STANDARD EI1566 | 1 | |
| EMB-00061-010 | DEVICE, STEERING READING | 2 | |
| EMB-00471-007 | DEVICE - COMPRESS, GAS SPRING | 1 | |
| EMB-00540-001 | Deflection Measuring Device | 2 | |
| EN3049A0236 | RING, SEALING TOROIDAL | 1 | |
| EN3049C3350 | RING, SEALING TOROIDAL | 1 | |
| EO 07.10.69 | MOORING ADAPTER F100 | 1 | |
| ERE2396 | SUSPENDED SPRING BALANCE | 1 | |
| ERSA TC 70 | SOLDERING IRON 115 V | 1 | |
| ES753-1TA | BEARING NEEDLE TOOL ASSEMBLY | 1 | |
| ES753-1TD | BEARING NEEDLE TOOL DISASSEMBLY | 1 | |
| ESD41 | RATCHET HEAD SPRING | 1 | |
| ESI222 | TRAILER WIRING BUDDY 7 PIN | 1 | |
| ET-1250 | LANDING GEAR SPRING TOOL | 1 | |
| ET-1251 | LANDING GEAR SPRING TOOL | 1 | |
| EW-404 | Conical Soldering Tip, .08mm, for Weller WES and WD stations and EC, PES and WCC irons, Mfr Plato | 1 | |
| EX-376 | RECHARGEABLE SOLDERING IRON | 1 | |
| EX-376S | RECHARGEABLE SOLEDERING IRON | 1 | |
| EX-92644 | JIG-DRILL, PINION REAR BEARING OIL JET | 2 | |
| Ex-69230 | Jig-drill, speed sensitive valve bearing cage | 1 | |
| Ex-71585 | Jig-drill, turbine front bearing cage lock pin hol | 1 | |
| Ex-71586 | Fixture, grinding, turbine front bearing retaining | 1 | |
| Ex-92644 | Jig-drill, pinion rear bearing oil jet | 2 | |
| Ex-92645 | Jig-drill, bearing cage | 1 | |
| Ex-92647 | Fixture-holding, nose bearing plate | 1 | |
| Ex-94248 | Indicator-bearing key slot gage | 1 | |
| Ex-97184 | Fixture-holding, nose bearing plate | 1 | |
| F0430160 | STD FLANK FAIRING LH | 1 | |
| F0N9-1851DA20 | WHEEL SPEED SENSOR WIRING HARNESS | 1 | |
| F1274472 | STAND TO REMOVE HAIRSPRING | 1 | |
| F1401479 | DE-BURRING TOOL | 1 | |
| F16-131 | INTAKE COVER, wide mouth type, tri-ring style | 1 | |
| F24-010 | CANOPY COVER, over-top, 24" fwd ext to cover cowl ring gap, gas cap ext. | 1 | |
| F2511353820000 | SPRING FOODTRAY A320 | 1 | |
| F26526000 | TOOLS FOR INSTALLATION OF THE BEARING CUP IN THE INNER AND OUTER | 4 | |
| F26527000 | TOOLS FOR REMOVAL OF THE BEARING CUP FROM THE INNER AND OUTER | 5 | |
| F26529000-1 | TOOLS FOR INSTALLATION OF THE BEARING CUP IN THE INNER AND OUTER WHEEL HALVES | 6 | |
| F26630200 | N/W STEERING ADJUSTER TOOL | 8 | |
| F26691000 | PISTON CONTER RING ASSEMBLY TOOL (FOR A BACKUP ON PISTON) AMDT | 3 | |
| F26691000-1 | PISTON CONTER RING ASSEMBLY TOOL F26691000 AMDT A | 6 | |
| F26786000 | TOOLS FOR REMOVAL OF THE BEARING CUP FROM THE INNER AND OUTER WHEEL HALVES | 4 | |
| F26792000-1 | TESTER ADAP NLG STEERING | 12 | |
| F26792000B | TESTER ADAP NLG STEERING | 1 | |
| F26816000 | TOOL USED TO INSTALL AND RESIZE THE BACK-UP RINGS ON THE PISTONS. | 3 | |
| F26817000 | TOOL USED TO INSTALL AND RESIZE THE BACK-UP RINGS ON THE PISTON SLEEVES. | 2 | |
| F26823000 | Tool for installation of the bearing cups (inner and outer) | 2 | |
| F26824000 | TOOL USED TO REMOVE THE BEARING CUPS (1-210) AND (1-490) FROM THE INNER AND OUTER HALF-WHEELS | 1 | |
| F26824010 | Tool for removal of the bearing cups (inner and outer) | 1 | |
| F2693 | LEGRAND WIRING TOOL | 1 | |
| F27093000 | PISTON RING INSTALLATION TOOL - MESSIER DOWTY INC | 1 | |
| F27108000 | TOOL USED TO INSTALL/REMOVE THE SPRING IN/FROM THE PISTON. SUPERSEDES R46452. | 2 | |
| F27169000 | Installation and resize of back-up rings on pistons | 1 | |
| F27170000 | Installation and resize of back-up rings on piston sleeves | 2 | |
| F27175000 | Installation of the bearing cups (inner and outer half-wheel) | 2 | |
| F27177000 | TOOL USED TO REMOVE BEARING CUPS (1-580 AND 1-310 | 2 | |
| F27178000 | Installation of the bearing cups (inner and outer half-wheel) | 2 | |
| F27185000 | TOOL FOR INSTALLATION OF THE BEARING CUPS AND THE BUSHES | 1 | |
| F27186000 | TOOL FOR EXTRACTION OF THE BEARING CUPS AND THE BUSHES | 1 | |
| F27271000 | TOOL USED TO REMOVE THE BEARING CUP | 2 | |
| F27272000 | TOOL USED TO REMOVE THE BEARING CUP | 2 | |
| F27531000 | Tool to install and resize the back-up rings on the pistons | 3 | |
| F27532000 | Tool to install and resize the back-up rings on the pistons sleeves | 3 | |
| F27535000 | Tool to installhe bearing into the inner and outer half-wheels | 3 | |
| F27698000 | Bearing Cup (I/B and O/B) R/I Tool | 1 | |
| F27699000 | Bearing Cup (I/B and O/B) R/I Tool | 1 | |
| F27700000 | TOOLS FOR THE INSTALLATION AND REMOVAL OF THE BEARING CUPS | 1 | |
| F28006000 | DISK CENTERING TOOL | 5 | |
| F28015000 | TOOL FOR THE INSTALLATION AND REMOVAL OF THE BEARING CUPS | 1 | |
| F28092000 | TOOL FOR HANDING THE MAIN LANDING GEAR WHEEL ASSEMBLY DURING THE DISASSEMBLY AND ASSEMBLY | 2 | |
| F28232000 | INSTALLATION TOOL FOR BEARING CUP (2-080) AND (3-030) | 1 | |
| F28247000 | TOOL FOR THE REMOVAL AND INSTALLATION OF THE BEARING CUPS | 1 | |
| F28248000 | TOOL FOR THE REMOVAL AND INSTALLATION OF THE BEARING CUPS | 1 | |
| F28373000 | BEARING INSPECTION STAND | 1 | |
| F28442000 | TOOL FOR REMOVAL AND INSTALLATION OF BEARING CUPS WHEEL HALVES | 1 | |
| F2MA927506 | METALLIC HORIZONTAL STABILIZER PROTRACTOR (WITH LH SPRING-LOADED FAIRING INSTALLED) | 1 | |
| F2MA927506A1 | COMPOSITE HORIZONTAL STABILIZER PROTRACTOR (WITH LH SPRING-LOADED FAIRING INSTALLED) | 1 | |
| F2MA927510 | HORIZONTAL STABILIZER PROTRACTOR (WITH LH SPRING-LOADED FAIRING REMOVED) | 1 | |
| F2MA927522100 | MEASURING FIXTURE FOR FLAP INTERMEDIATE TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F2MA927522200 | MEASURING FIXTURE FOR FLAP DUAL TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F2MA927522300 | MEASURING FIXTURE FOR FLAP POWER DRIVE UNIT BACKLASH | 1 | |
| F2MA932302001 | TIRE BEADBREAKER RINGS | 1 | |
| F2MA952500 | COMPRESSION TOOL FOR SPRING OF BAGGAGE COMPARTMENT DOOR | 1 | |
| F2MB932302003 | MAIN WHEEL TIRE BEADBREAKER RING | 1 | |
| F2MB971040020 | TOOL FOR CENTERING ENGINE FORWARD PINS | 1 | |
| F46754-1000 | USED FOR PROTECTING THE WHEEL AXLE THREAD AND MAIN GEAR LINER DURING WHEEL INSTALLATION. | 46 | |
| F47696 | MEASURING ROD TOOL | 1 | |
| F572-55221-200W8400-01 | SHORING CRADLE | 1 | |
| F572-55237-200W8400-01 | SHORING CRADLE | 1 | |
| F5757109700000-BT | REMOVE AND INSTALL B EARING (7IT) | 1 | |
| F616S32 | NOSE LANDING GEAR STEERING VALVE RIGGING TOOL | 1 | |
| F626S52 | SPRING TOOL, PARATROOP DOOR NEGATOR | 1 | |
| F627S52 | SPRING TOOL, PARA TROOP DOOR | 1 | |
| F630S52 | ZCREW DOOR NEGATOR SPRING. | 1 | |
| F65-0-3098-29 | Detail 29, Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-41 | Detail 41 (DLD Cover Plate), Nose Gear Steering Test Fixture | 1 | |
| F65-0-3098-42 | Nose Gear Steering Test Fixture Detail 42 (Compensator Cap) | 1 | |
| F65-0-3311 | ADAPTER - TEST, NOSE WHEEL STEERING METERING VALVE (SPL-5281) | 2 | |
| F70030 | A-FRAME ASSY-FIN RAISING & LOWERING USED WITH | 1 | |
| F70053 | WRENCH ASSY -0 METERING PIN USED TO HOLD THE | 1 | |
| F70085 | WRENCH, SPANNER - BEARING RETAINER NUT (DOOR VERTICAL POSITIONING) (THE BOEING COMPANY) | 22 | |
| F70087 | WRENCH SPANNER -0 BEARING RETAINING NUT USED TO | 1 | |
| F70106 | WRENCH ASSY -0 METERING PIN USED TO TIGHTEN OR | 1 | |
| F70114 | GUIDE ASSY-MLG INNER CYLINDER O-RING USED TO | 1 | |
| F70138 | WRENCH ASSY -0 METERING PIN NUT USED DURING | 1 | |
| F70150 | PULLER ASSY -0 CONTROL ACTUATOR BEARING USED TO | 1 | |
| F70159 | WRENCH ASSY- STAB. TRIM ACTUATOR SPRING USED IN | 1 | |
| F70240 | ADJUSTING TOOL -THROTTLE CONTROL USED DURING | 1 | |
| F70281 | LOC.BLOCK SET -0 FAN REV COWL RING, JT3D TO HOLD | 1 | |
| F70297 | ROLLER SWAGING TOOL -0 BEARING HOUSING, DRIVE | 1 | |
| F70297-1 | ROLLER SWAGING TOOL - BEARING HOUSING DRIVE SCREW, FILLET FLAP | 1 | |
| F70315 | TETHERING FITTING-OTBD WING AC RECOVERY | 1 | |
| F70337 | TEST SET-"Q" SPRING RAM AIR INTAKE USED WITH AN | 1 | |
| F71127-9 | SPRING, COMPLETE PER DWG | 1 | |
| F71136 | BAR ASSY -0 AIRPLANE TOWING AND STEERING TOWING, | 1 | |
| F71170 | WRENCH ASSY -0 HOOK SPANNER USED DURING OVERHAUL | 2 | |
| F71188 | ADAPTER ASSY -0 HYDRAULIC PRESSURE USED DURING | 1 | |
| F71288 | JIG ASSY-NOSE GEAR LOCK ACTUATOR USED DURING | 1 | |
| F71312 | GUIDE ASSY -0 MLG INNER CYLINDER "O"RING USED TO | 1 | |
| F71313 | SOCKET WRENCH ROD END BEARING | 2 | |
| F71313-10 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-11 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-12 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-13 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-14 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-15 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-16 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-17 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-18 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-19 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F71313-20 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-21 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-22 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-23 | Wrench - Socket, Rod End Bearing | 1 | |
| F71313-24 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-25 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-3 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-31 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-32 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-33 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-34 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-35 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-36 | Wrench - Socket, Rod End Bearing | 5 | |
| F71313-37 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-38 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-39 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-40 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-41 | Wrench - Socket, Rod End Bearing | 4 | |
| F71313-42 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-43 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-44 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-45 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-46 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-47 | Wrench - Socket, Rod End Bearing | 5 | |
| F71313-48 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-49 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-50 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-51 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-52 | WRENCH - SOCKET, ROD END BEARING | 2 | |
| F71313-52-5 | ROD END BEARING SOCKET WRENCH | 1 | |
| F71313-55 | WRENCH - SOCKET, ROD END BEARING | 4 | |
| F71313-6 | Wrench - Socket, Rod End Bearing | 2 | |
| F71313-7 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F71313-8 | Wrench - Socket, Rod End Bearing | 3 | |
| F71313-9 | WRENCH - SOCKET, ROD END BEARING | 1 | |
| F71313-XX | Wrench -Socket. Rod End Bearing | 1 | |
| F7131333 | WRENCH - SOCKET, ROD END BEARING | 3 | |
| F71342 | RING ASSY -0 SEAL INSTALLING MLG TOOL IS USED TO | 1 | |
| F72719-1 | D RING - A/C TOWING CABLES | 1 | |
| F72729 | LOCK -0 ELEVATOR USED DURING REMOVAL AND INSTL. | 1 | |
| F72735-13 | GROUND LOCK ASSY - NOSE WHEEL STEERING | 24 | |
| F72780 | FITTING ASSEMBLY -0 NOSE MOORING USED TO MOOR | 1 | |
| F72819 | BEARING PULLER ASSEMBLY USED TO REMOVE BEARINGS | 1 | |
| F72820 | BEARING PULLER ASSEMBLY USED TO REMOVE BEARINGS | 1 | |
| F72822 | MANDREL ASSEMBLY -0 BEARING SWAGING TO SWAGE THE | 1 | |
| F72822-1 | MANDREL BEARING SWAG | 1 | |
| F72822-2 | MANDREL BEARING SWAG | 1 | |
| F72865-1 | PRESSURE STAKING TOOL - FORWARD LINK PIVOT BEARING, THRUST REVERSER | 1 | |
| F72878 | FLANGE -0 PRESSURE TEST L.P. DUCTS USED DURING | 1 | |
| F72909 | SPRING COMPRESSR-CARGO DOOR SPRNG CRTRDG USED | 1 | |
| F72909-1 | CARGO DOOR SPRING CARTRIDGE | 2 | |
| F72925 | WRENCH-SET -0 BEARING NUT FIN STAB.HINGE USED TO | 1 | |
| F72930-1 | MLG SIDESTRUT FWD BEARING ADAPTER | 1 | |
| F72936 | RIGGING PROTRACTOR -0 NOSE GEAR STEERING USED TO | 1 | |
| F72936-1 | RIGGING PROTRACTOR -0 NOSE GEAR STEERING USED TO | 6 | |
| F72940 | CLAMP SET -0 NOSE WHEEL STEERING CYLINDER USED | 1 | |
| F72942-1 | Lubrication Set - Entry, Cargo, Service and Galley Door Camshaft Bearings | 23 | |
| F72942-1 | LUBRICATION SET IS B737-DOOR CAMSHAFT BEARINGS | 23 | |
| F72951-1 | Pressure monitoring device -0-5 psig (0-138 inches of water/0-34.5kPa) | 17 | |
| F72957-1 | TOWBAR AND ADAPTER AIRPLANE TOWING AND STEERING | 1 | |
| F72957-1 -51 -58 | Towbar -Airplane Towing And Steering | 1 | |
| F72957-48 | TOWBAR -0 AIRPLANE TOWING AND STEERING USED FOR | 1 | |
| F72957-51 | TOWBAR - AIRPLANE TOWING AND STEERING | 2 | |
| F72957-58 | TOWBAR AND ADAPTER AIRPLANE TOWING AND STEERING | 1 | |
| F72965 | TETHERING FITTINGS-727 AFT BODY A/P RECOVERY. | 1 | |
| F72977-26 | EQUIPMENT IS USED DURING MAINTENANCE TO BLEED THE BRAKES. | 5 | |
| F73006 | SPRING EXTENDER-COUNTER BALANCE, VENTRAL | 1 | |
| F73006-1 | EXTENDER SPRING AFT | 3 | |
| F73012 | SWAGING EQPT -0 ROLLER USED TO SWAGE BEARINGS | 1 | |
| F794 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| F7XC202759001 | AILERON DEFLECTION MEASURING TOOL | 1 | |
| F7XC202759510 | HORIZONTAL STABILIZER DEFLECTION MEASURING TOOL | 1 | |
| F7XC205706201 | GREASING TOOL FOR 15MM-DIA BEARING (AILERON HINGES 1 2) | 1 | |
| F7XC205706202 | GREASING TOOL FOR 18MM-DIA BEARING (AILERON UPPER INBD HINGE 3) | 1 | |
| F7XC205706203 | GREASING TOOL FOR 15MM-DIA BEARING (AILERON LOWER HINGE 3) | 1 | |
| F7XC205706204 | GREASING TOOL FOR 18MM-DIA BEARING (AILERON UPPER OUTBD HINGE3) | 1 | |
| F7XC552900070A1 | ELEVATOR CENTERING PIN DIAMETER 8 | 1 | |
| F7XC552900071A1 | ELEVATOR CENTERING PIN DIAMETER 10 | 1 | |
| F7XC552900072A1 | ELEVATOR CENTERING PIN DIAMETER 12 | 1 | |
| F80-0-5932 | MOTOR SOLDERING FIXTURE | 1 | |
| F80003-11 | RING -0 HOIST (CANCELED) | 1 | |
| F80018-1 | SPANNER WRENCH - FWD TRUNNION BEARING NUT, | 17 | |
| F80018-2 | FORWARD TRUNNION BEARING NUT | 11 | |
| F80018-3 | SPANNER WRENCH - FWD TRUNNION BEARING NUT, | 1 | |
| F80020-5 | ADAPTER WRENCH – MLG TRUNNION BEARING NUT | 16 | |
| F80056-1 | Plug Set Steering Cylinder | 6 | |
| F80096-1 | HOLDING FIXTURE - FORWARD TRUNNION BEARING HOUSING, MAIN GEAR | 2 | |
| F80096-1 -4 -7 | Holding Fixture -Forward Trunnion Bearing Housing. Main Gear | 1 | |
| F80096-1-4-7 | MLG TRNION BEARING HOLD FIXTURE | 1 | |
| F80096-4 | HOLDING FIXTURE - FWD TRUNNION BEARING H | 10 | |
| F80096-7 | HOLDING FIXTURE ASSY-MLG FWD TRUNNION BEARING | 6 | |
| F80113-105 | ROLLER BEARING SWEDGE KIT | 17 | |
| F80113-106 | BODY BEARING SWAGE | 3 | |
| F80113-107 | BODY BEARING SWAGE | 3 | |
| F80113-123 | Oil impregnated bronze thrust bearing | 2 | |
| F80113-124 | Oil impregnated bronze thrust bearing | 2 | |
| F80113-125 | Oil impregnated bronze thrust bearing | 2 | |
| F80113-2 | BODY BEARING SWAGE | 5 | |
| F80113-3 | BODY BEARING SWAGE | 3 | |
| F80113-32 | BODY BEARING SWAGE | 2 | |
| F80113-38 | BODY BEARING SWAGE | 1 | |
| F80113-4 | BODY BEARING SWAGE | 4 | |
| F80113-45 | BODY BEARING SWAGE | 1 | |
| F80113-50 | ROLLER BEARING SWEDGE KIT | 10 | |
| F80113-53 | BODY BEARING SWAGE | 7 | |
| F80113-6 | BODY BEARING SWAGE | 1 | |
| F80113-65 | BODY BEARING SWAGE | 2 | |
| F80113-78 | BODY BEARING SWAGE | 1 | |
| F80113-79 | BODY BEARING SWAGE | 1 | |
| F80113-89 | BODY BEARING SWAGE | 1 | |
| F80113-96 | BODY BEARING SWAGE | 1 | |
| F80115-2 | THREAD PROTECTOR, SPRING SUPPORT SHAFT | 6 | |
| F80118-5 | BEARING RETENTION/REMOVAL BODY ASSEMBLY (ACCESSORY TO F80118-1 KIT) | 1 | |
| F80120-1 | Test Fixture - Elevator and Rudder Centering Unit | 2 | |
| F80145-1 | DOOR - PURGING CENTER INTEGRAL RING TANK | 1 | |
| F80158-1 | TRUNNION PIN & BEARING PULLR NLG SUPRSDD | 5 | |
| F80158-17 | Trunnion Pin And Bearing Puller Set -Nose Gear | 20 | |
| F80161-10 | Clamp -Nose Steering And Piston Position Cables | 4 | |
| F80162-1 | CLAMP - NOSE GEAR STEERING ACT. ROD | 16 | |
| F80162-9 | CLAMB NOSE GEAR STERING ACTR ROD | 1 | |
| F80163-1 | Expander Assy Tension Spring Ng Gravel Defltr | 5 | |
| F80169 | SPRING EXPANDER SET-737 MAIN LANDING GEAR | 1 | |
| F80169-1 | MLG SPRING EXPANDER | 15 | |
| F80169-1-AZL | SPRING EXPANDER SET - MLG | 1 | |
| F80169-2 | Spring expander | 1 | |
| F80176-1 | TORQUE WRENCH ADAPTER MLG TRUNNION AFT BEARING NUTX | 5 | |
| F80176-8 | Torque Wrench Adapter -Main Landing Gear Trunnion. Aft Bearing Nut | 16 | |
| F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 16 | |
| F80180-31 | 10 DIA SCOPE MT RING | 1 | |
| F80202 | ALLEN ADAPTER NLG STEERING | 1 | |
| F80202-1 | NOSE WHEEL STEERING CYLINDER ALLEN ADAPTOR | 8 | |
| F80215 | GAUGE-T/R DOOR FAIRING | 1 | |
| F80215-1 | THRUST REVERSER DOCK FAIRING | 3 | |
| F80218-40 | TEST - FORCE TRANSDUCER CONTROL WHEEL STEERING | 2 | |
| F80218-41 | Test Set -Force Transducer. Control Wheel Steering Sp177 / Sp300 Auto Pilot | 3 | |
| F80218-42 | TEST - SET TRANSDUCE CONTROL WHEEL STEERING | 6 | |
| F80226-2 | FITTING ASSY-NOSE MOORING USED WITH A SUITABLE | 1 | |
| F80241-1 | Restraint - Tethering, Sta 322.5 Forward Entry And Forward Galley Doors | 1 | |
| F80241-16 | RESTRAINT - TETHERING, FORWARD AND AFT DOORS | 1 | |
| F80241-17 | RESTRAINT - TETHERING, FORWARD AND AFT DOORS | 4 | |
| F80241-9 | Restraint - Tethering, Sta 322.5 Forward Entry And Forward Galley Doors | 1 | |
| F80246-1 | Checking Equipment -Axial Play. Carriage Thrust Bearing. Outboard Flap | 2 | |
| F80251-1 | BEARING EQUIPMENT - GROUND SPOILER AND ACTUATOR SP | 1 | |
| FAIDIV4 | 4" SPRING DIVIDERS | 1 | |
| FAIDIV8 | 8" SPRING DIVIDERS | 1 | |
| FAMBS335 | SHEARING MACHINE, HAND LIVER | 1 | |
| FB-65 | HAND BEARING COMPASS | 1 | |
| FB336-2 | GAGE BLADE RING | 1 | |
| FBA_D-950 | INDOOR SOLDERING IRON 110 VOLTS | 1 | |
| FBPT-U25PL | FBPT-U25PL;Tip Univ. 2.5mm Patch Cord for FBP Plastic Inner Ring | 1 | |
| FD-V50 | GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND CAPACITY | 1 | |
| FD0004D23654000 | DISENGAGEMENT UNIT STEERING | 1 | |
| FDI 50 | COM-2529 GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND CAPACITY | 1 | |
| FDI50 | COM-2529 GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND CAPACITY | 1 | |
| FDIX 100 | MECHANICAL MANUAL MEASURING DEVICE | 7 | |
| FDIX 50 | GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND C | 4 | |
| FDIX100 | COM-2529 GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND CAPACITY | 7 | |
| FDIX50 | TENSILE AND COMPRESSIVE FORCE MEASURING | 4 | |
| FDOO01-35-42000-000 | To align barrel assy and end fitting (9-250) during assembly | 1 | |
| FDOO04D | DISENGAGEMENT UNIT STEERING | 1 | |
| FDOO04D23654000 | Disengagement Unit, Steering | 1 | |
| FDV 50 | GAUGE - FORCE, PUSH/PULL/SPRING SCALE, 50 POUND CAPACITY | 1 | |
| FEM 0506 | 10 SQMM ALUMINIUM LUGS HEAVY DUTY (RING) | 1 | |
| FF1A16 | FOAM W/ MEASURING AND OTHERS | 1 | |
| FF1A66 | FOAM INLAY MEASURING TAPE AND SCREWDRIVER SET | 1 | |
| FFL72483666 | DIAMOND FILE AND DEGURRING SET | 1 | |
| FFL72483777 | 4PC DEBURRING CUTTER SET | 1 | |
| FFL72483888 | UNIVERSAL DEBURRING KIT | 1 | |
| FGFB910203 | FORWARD TIE-DOWN RING | 1 | |
| FGFB927500 | FULLY EQUIPPED CASE OF MEASURING INSTRUMENTS FOR FLIGHT CONTROL LOAD AND DEFLECTION | 1 | |
| FGFB927501 | RUDDER DEFLECTION MEASURING FIXTURE | 2 | |
| FGFB927504A1 | MEASURING FIXTURE FOR RUDDER PEDAL LOAD AND TRAVEL DISTANCE | 1 | |
| FGFB927507-1 | LH AILERON DEFLECTION MEASURING FIXTURE | 1 | |
| FGFB927507-2 | RH AILERON DEFLECTION MEASURING FIXTURE | 1 | |
| FGFB932302002 | RING SUPPORT DISK | 1 | |
| FIG901 | OUTBOARD BEARING CUP REMOVAL TOOL | 1 | |
| FIG902 | INBOARD BEARING CUP REMOVAL TOOL | 1 | |
| FJ175-516 | CASTER BOLT AND BEARING KIT | 1 | |
| FJ200-3 | UNIVERSAL JOINT AND O-RING | 1 | |
| FKR01 | Ionic Systems Filters Key Ring, Drg No 038 | 2 | |
| FL 500 | SPRING BALANCE 30 DAN (72 LBF) | 2 | |
| FL500 | SPRING BALANCE 30 DAN (72 LBF) | 2 | |
| FLAP BEARING SKT | FWD FLAP BEARING TOOL | 1 | |
| FLSF | Spring Loaded Fairing Tool | 1 | |
| FLUKE TL71 | MEASURING TIPS BLACK/RED 10A CAT II 1000V 1,5M | 1 | |
| FM262E | Ni-cad battery cell watering Dispenser and recording unit | 2 | |
| FMG4400D | GSE 300 FLASH MEADURING | 9 | |
| FMG4400DE | STROBE MEASURING DEVICE | 5 | |
| FORCE GAUGE | CAPABLE OF MEASURING 0.001 POUND TO 100 POUND, FOR B777 | 1 | |
| FR300-11 | DE-SOLDERING | 1 | |
| FRSN625 | HAND RETRACT. SPRING PLUNGER 5/8-11 | 1 | |
| FS-1652J | JET BRAND FOOT SHEARS 16 GAUGE 52 SHEARING CAPAC | 1 | |
| FSLF | SPRING LOADED FAIRING TOOL | 1 | |
| FSNMRS12FNLS | CAP HYDRAULIC O-RING FACE SE | 1 | |
| FSNMRS12PNLO | PLUG HYDRAULIC O-RING FACE S | 1 | |
| FSNMRS16FNLS | CAP HYDRAULIC O-RING FACE SE | 1 | |
| FSNMRS16PNLO | PLUG HYDRAULIC O-RING FACE SE | 1 | |
| FSNMRS4FNL-S | CAP HYDRAULIC O-RING FACE SE | 1 | |
| FSNMRS4HLO-S | UNION HYDRAULIC O-RING FACE | 1 | |
| FSNMRS4PNLOS | PLUG HYDRAULIC O-RING FACE S | 1 | |
| FSNMRS8FNL-S | CAP HYDRAULIC O-RING FACE SE | 1 | |
| FSNMRS8PNLOS | PLUG HYDRAULIC O-RING FACE S | 1 | |
| FT 024402 | TIE DOWN RINGS | 1 | |
| FX951-61 | SOLDERING | 1 | |
| FXT-09694 | BEARING HOLDING FIXTURE | 1 | |
| FXT09694 | BEARING HOLDING FIXTURE | 1 | |
| FY5-06940 | TOOL SET-FWD FLAP TRACK BEARING R/I | 1 | |
| F−4333 AT55119 or 63040009−1 | MLG Metering−Pin Retaining Nut− Installation Tool (Goodrich Aerospace 02121) | 1 | |
| F−6430 | MLG Metering−Pin Retaining Nut− Installation Tool (Goodrich Aerospace 02121) | 1 | |
| G070KN | ERSA SOLDERING-IRON | 1 | |
| G07OKN | ERSA SOLDERING-IRON | 1 | |
| G1002700001-057 | BEARING REMOVAL AND INSTALL KIT | 1 | |
| G20002-1 | RETAINER - KEYING POST, SPRING LATCH REMOVAL, AMP213408 PLUG MODULE | 1 | |
| G20004-15 | DIE - BEARING STAKE, ROD END ASSY | 3 | |
| G215-270011-1 | RUDDER SPRING TAB CLAMP | 1 | |
| G27001-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G27002-1 | USED AS A LOCK BETWEEN THE ACTUATOR AND THE SPOILER HINGE FITTING TO HOLD SPOILER OPEN AGAINST SYSTEM PRESSURE DURING MAINTENANCERIGGING. | 10 | |
| G27005 | SWAGING EQPT -0 SEAL RING, OUTBD XMSN, OUTBD TE | 1 | |
| G27005-16 | SWAGING EQUIPMENT - SEAL RING, OUTBOARD TRANSMISSION, OUTBOARD TRAILING EDGE FLAP DRIVE | 2 | |
| G27006 | SAWGING EQPT -0 SEAL RING, INBD XMSN, OUTBD TE | 1 | |
| G27006-16 | SWAGING EQUIPMENT - SEAL RING, INBOARD TRANSMISSION, OUTBOARD TRAILING EDGE FLAP DRIVE | 2 | |
| G27007 | SWAGING EQPT -0 SEAL RING, INBD XMSN, INBD TE | 1 | |
| G27007-16 | SWAGING EQUIPMENT - SEAL RING, INBOARD TRANSMISSION, INBOARD TRAILING EDGE FLAP DRIVE | 2 | |
| G27017-1 | BAR - RIGGING, FLAP TRACK FAIRING, NO. 1 AND NO. 8 DOOR | 6 | |
| G27047-8 | Weldless ring | 1 | |
| G27073-1 | BOOTSTRAP CLAMP EQUIPMENT - FAIRING TRAILING EDGE FLAP TRACK (CE) | 5 | |
| G27084-1 | HANDLING DOLLY - FAIRING, TRAILING EDGE FLAP TRACK | 6 | |
| G27086-1 | MEASURING EQUIPMENT - FREEPLAY, LOWER RUDDER TAB | 1 | |
| G27086-17 | MEASURING EQUIPMENT - FREEPLAY, LOWER RUDDER TAB | 3 | |
| G27086-22 | MEASURING EQUIPMENT - FREEPLAY, LOWER RUDDER TAB | 2 | |
| G27099-46 | SPRING PIN, COILED 3/32" X 5/1 | 1 | |
| G32007-1 | USED TO PROTECT THE MLG AXLE FROM DAMAGE WHILE WHEELS ARE OFF AND DURING BRAKE REMOVAL AND INSTALLATION. B747-400 & 400F | 13 | |
| G32015 | SUPPORT STAND -0 BODY GEAR STEERING ACTUATOR | 1 | |
| G32015-1 | SUPPORT STAND - BODY GEAR STEERING ACTUATOR | 5 | |
| G32019 | ROLLER SWAGING EQPT -0 OUTBD TRUNNION BEARING | 1 | |
| G32019-1 | ROLLER SWAGING EQUIPMENT - OUTBOARD TRUNNION BEARING ASSEMBLY, MAIN LANDING GEAR | 1 | |
| G32027 | ALIGN GUIDE -0 BOLT STEERING MECHANISM, BODY | 1 | |
| G32027-1 | ALIGN GUIDE - BOLT STEERING MECHANISM, BODY LANDING GEAR | 6 | |
| G32032 | HOLDING EQPT -0 INNER CYLINDER AND METERING ROD, | 1 | |
| G32032-1 | HOLDING EQUIPMENT - INNER CYLINDER AND METERING ROD, WING LANDING GEAR | 4 | |
| G32063-1 | PULLER EQUIPMENT - SHEAR PIN, BEARING HOUSING, WING LANDING GEAR | 3 | |
| G32064-1 | EQUIPMENT REMOVAL/INSTALLATION - UPLOCK SPRING, WING LANDING GEAR AND BODY LANDING GEAR | 2 | |
| G32072-1 | LOCKOUT PIN - NOSE LANDING GEAR, STEERING BYPASS | 6 | |
| G32072-2 | LOCKOUT PIN - NOSE LANDING GEAR, STEERING BYPASS | 3 | |
| G32078-1 | Clamp assy-nose landing gear steering | 6 | |
| G52011 | GUIDE EQPT -0 CARRIER BEARING ASSY | 1 | |
| G52011-1 | Guide eqpt-carrier bearing assy | 1 | |
| G54004-36 | BEARING, PRESSURIZED, DRIVE | 9 | |
| G54014 | ADAPTER -0 PIVOT BOLT, SPRING BEAM | 1 | |
| G54014-1 | ADAPTER - PIVOT BOLT, SPRING BEAM | 2 | |
| G54015-1 | BEARING, PRESSURIZED, DRIVEN | 3 | |
| G57005 | BORING EQPT- GIMBAL SPRT, INBD CARRIAGE, INBD | 1 | |
| G600-240008-1 | TOOL ADG ACTUATOR TRAVEL MEASURING | 1 | |
| G600-320013-1 | KIT - STEERING VALVE DIFFERENTIAL SETTING OIECE | 1 | |
| G600-520003-1 | RESTRAIN GAS SPRING LOAD CELL | 1 | |
| G600-520003-2 | RESTRAIN GAS SPRING LOAD CELL | 2 | |
| G600-520003-27 | Restrain - Gas Spring Load Cell (L/H) | 1 | |
| G600-520003-28 | Restrain - Gas Spring Load Cell (R/H) | 1 | |
| G600−520003−1 | Restraint − Gas Spring Load Cell (LH) | 1 | |
| G600−520003−2 | Restraint − Gas Spring Load Cell (RH) | 2 | |
| G601R102002-1 | Adapter Kit - Mooring | 1 | |
| G601R102002−1 | Adapter Kit − Mooring | 1 | |
| G601R200007 | KIT HYDRAULIC BEARING SWAGING | 1 | |
| G601R200007-1 | HYDRAULIC BEARING SWAGING | 1 | |
| G601R200007-39 | Hydraulic Kit. Bearing Swaging | 2 | |
| G601R200008 | Bearing Tool Kit. Swaging And Cutting | 1 | |
| G601R200008-1 | Bearing Tool Kit. Swaging And Cutting | 4 | |
| G601R200008−1 | Bearing Tool Kit − Swaging and Cutting | 4 | |
| G601R200009-1 | KIT HYDRAULIC BEARING SWAGING | 2 | |
| G601R200009−1 | Bearing Tool Kit − Swaging and Cutting | 2 | |
| G601R242301-1 | MEASURING TOOL - ADG ACTUATOR TRAVEL | 2 | |
| G601R242301−1 | Measuring Tool − ADG Actuator Travel | 2 | |
| G601R325102-1 | KIT - SCALE AND POINTER NW STEERING | 7 | |
| G601R3251021 | KIT SCALE AND POINTER NW STEERING | 7 | |
| G601R325102−1 | Kit − Scale and Pointer NW Steering | 7 | |
| G601R521103-1 | RESTRAIN - GAS SPRING LOAD CELL | 5 | |
| G601R521103-1 | RESTRAIN ASSY, GAS SPRING LOAD | 5 | |
| G601R521103-2 | RESTRAIN - GAS SPRING LOAD CELL | 1 | |
| G601R521103−1 | Restraint − Gas Spring Load Cell (LH) | 5 | |
| G601R521103−2 | Restraint − Gas Spring Load Cell (RH) | 1 | |
| G601R521106-1 | HAND RAIL MEASURING TOOL | 1 | |
| G601R521106−1 | Measuring Tool − Hand Rail | 1 | |
| G601R521109-1 | DOOR SPRING COMPRESSOR TOOL | 9 | |
| G601R523100 | RIGGING TOOL - AFT BAGGAGE-BAY DOOR COUNTERBALANCE-SPRING | 1 | |
| G601R523100-1 | I NSTALLATION TOOL - CARGO COMPARTMENT DOOR SPRING | 4 | |
| G601R523100-1-REVNC | I NSTALLATION TOOL - CARGO COMPARTMENT DOOR SPRING | 1 | |
| G601R523100−1 | Rigging Tool − Aft Baggage−Bay Door Counterbalance−Spring | 4 | |
| G670-3251001−101 | NLG STEERING MANIFOLD BREAK-OUT BOX | 1 | |
| G670100000-1 | KIT - PARKING AND MOORING | 1 | |
| G670R200008 | BEARING TOOL KIT, SWAGING AND CUTTING | 1 | |
| G670−3251001−101 | NLG steering manifold break−out box | 1 | |
| G700-321108-1 | Kit - Mlg Bushing And Bearing Removal Tool | 3 | |
| G700-521110-1 | Passenger Door Lowering Tool | 2 | |
| GA311C | WIRE TWISTER/CUTTER, NON-REVERSIBLE, SPRING LOADED, 0.060 INCH CAP, 10.5 INCH LONG | 3 | |
| GA3400 | UPPER MAIN ROTOR SERVO ROD END BEARING PN GA3400, (OR COMMERCIAL EQUIVALENT) | 3 | |
| GA63799 | END # END-ASSY, DOWNLOCK SPRING NLG | 1 | |
| GASCAT75P | GAS SOLDERING IRON | 1 | |
| GB458-021-097 | HOSE, CONNECTION FILTERING ELEMENT (FOR AGSE - GB BARBERI HYDRAULIC SYSTEM TEST BENCH) | 1 | |
| GB672-075-100 | FILTERING ELEMENT (FOR AGSE-GB BARBERI HYDRAULIC SYSTEM TEST BENCH) | 1 | |
| GBT72141 | BEARING DRIVER | 1 | |
| GE XLGO 6160+ system (6m) | GE XLGO 6160+ system (6m) - 6.1mm/6m Videoprobe + Stereo Measurement, XpertSuite enhances the probability of detecting and identifying flaws using precise steering, superior visibility and easier viewing | 1 | |
| GE-102 | QEC OFF-LINK ENGINE STORAGE/TRANSPORT COVER, GE CF-6, w/ Inlet Ring and Exhaust Cone, Fully enclosed under belly | 1 | |
| GE17UK | SPHERICAL BEARING ¿30MM.O.D. X ¿16.95MM.I.D. | 1 | |
| GEDORE-010140 | GEDORE 010140 ADS12D - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010160 | GEDORE 010160 ADS12A - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010188 | GEDORE 010188 ADS25S - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010200 | GEDORE 010200 ADS25F - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010228 | GEDORE 010228 ADS40S - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010240 | GEDORE 010240 ADS40F - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010300 | GEDORE 010300 BDS80A - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010320 | GEDORE 010320 BDS80E - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010340 | GEDORE 010340 BDS160 - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-010360 | GEDORE 010360 BDS200 - DIAL MEASURING TORQUE WRENC | 1 | |
| GEDORE-027280 | GEDORE 027280 10 MM RING END 8792-10, TORQUE WRENC | 1 | |
| GEDORE-027300 | GEDORE 027300 11 MM RING END 8792-11, TORQUE WRENC | 1 | |
| GEDORE-027320 | GEDORE 027320 12 MM RING END 8792-12, TORQUE WRENC | 1 | |
| GEDORE-027340 | GEDORE 027340 13 MM RING END 8792-13, TORQUE WRENC | 1 | |
| GEDORE-027360 | GEDORE 027360 14 MM RING END 8792-14, TORQUE WRENC | 1 | |
| GEDORE-027380 | GEDORE 027380 15 MM RING END 8792-15, TORQUE WRENC | 1 | |
| GEDORE-027400 | GEDORE 027400 16 MM RING END 8792-16, TORQUE WRENC | 1 | |
| GEDORE-027420 | GEDORE 027420 17 MM RING END 8792-17, TORQUE WRENC | 1 | |
| GEDORE-027440 | GEDORE 027440 18 MM RING END 8792-18, TORQUE WRENC | 1 | |
| GEDORE-027460 | GEDORE 027460 19 MM RING END 8792-19, TORQUE WRENC | 1 | |
| GEDORE-027480 | GEDORE 027480 20 MM RING END 8792-20, TORQUE WRENC | 1 | |
| GEDORE-027500 | GEDORE 027500 21 MM RING END 8792-21, TORQUE WRENC | 1 | |
| GEDORE-027520 | GEDORE 027520 22 MM RING END 8792-22, TORQUE WRENC | 1 | |
| GEDORE-027540 | GEDORE 027540 23 MM RING END 8792-23, TORQUE WRENC | 1 | |
| GEDORE-027560 | GEDORE 027560 24 MM RING END 8792-24, TORQUE WRENC | 1 | |
| GEDORE-027600 | GEDORE 027600 26 MM RING END 8792-26, TORQUE WRENC | 1 | |
| GENS106 | SPRING TUBING BENDER SET SPRI | 1 | |
| GFG312 | INTERNAL MEASURING DEVICE 35-100 MM | 1 | |
| GFM170S | FLOW MEASURING DEVICE | 1 | |
| GHS0625 | HYD SHEARING MACHINE | 1 | |
| GLX4532 | LOG BOOK BINDER BLUE, 4 RING | 1 | |
| GPM11416 | YELLOW PLASTIC RING TO HOLD UP D BOLTS TURBINE DISC & STUB SHAFT | 1 | |
| GR000025 | BEARING ALIGNMENT MANDREL AND GAP GUAGE | 1 | |
| GR000068 | BEARING ALIGNMENT MANDREL AND GAP GAUGE | 1 | |
| GR000073 | BEARING ALIGNMENT MANDREL AND GAP GAUGE | 1 | |
| GR000126 | NLG OUTBOARD BEARING CUP EXTRACTOR | 1 | |
| GR000127 | NLG INBOARD BEARING CUP EXTRACTOR | 1 | |
| GS-23K | SOLDERING GUN | 1 | |
| GS10747-1 | FXTR ASSY-BEARING DIFF GEAR TRAIN | 1 | |
| GS10749 | DRIVER - BEARING | 1 | |
| GS10810 | DRIVER BEARING | 1 | |
| GS10816 | DRIVER BEARING | 1 | |
| GS10829 | DRIVER NEEDLE BEARING | 1 | |
| GS10830 | DRIVER NEEDLE BEARING | 1 | |
| GS10831 | NEEDLE BEARING DRIVER | 1 | |
| GS10832 | PULLER, NEEDLE BEARING | 1 | |
| GS10833 | PULLER, NEEDLE BEARING | 1 | |
| GS10852 | THRUST BEARING DRIVER | 1 | |
| GS10865 | SPRING GUIDE DRIVER | 1 | |
| GS10898 | LOCK RING EXPANDER | 1 | |
| GS11789 | DRIVER BEARING | 1 | |
| GS11793 | DRIVER BEARING | 1 | |
| GS11795 | DRIVER BEARING | 1 | |
| GS12970-1 | DRIVER SET, BEARING | 1 | |
| GS13044 | INSERTER,BEARING AND BUSHING | 1 | |
| GS13146-1 | HOLDER,BEARING SLEEVE | 2 | |
| GS13149-1 | BEARING DRIVER | 2 | |
| GS13154-1 | Bearing Seal Holder | 2 | |
| GS13156-1 | Dummy Bearing Spacer | 1 | |
| GS13171-1 | BEARING DRIVER | 2 | |
| GS13188-1 | BEARING DRIVER | 2 | |
| GS13221-1 | DRIVER, BEARING | 1 | |
| GS13328-1 | DRIVER, BEARING | 1 | |
| GS13461-1 | BEARING DRIVER | 2 | |
| GS13651 | MOLD BLADE FAIRING | 1 | |
| GS14630-1 | Bearing Driver Set (7 IT) | 1 | |
| GS14759-1 | HOLDER, BEARING SLEEVE | 1 | |
| GS14762-1 | BEARING DRIVER | 1 | |
| GS14767-1 | SPACER, DUMMY BEARING | 1 | |
| GS14875-1 | INDICATOR BEARING SQUARENESS | 2 | |
| GS15030-1 | DRIVER - BEARING | 1 | |
| GS15453-1 | ADAPTER, SPRING SEAT | 1 | |
| GS15614-1 | DRIVER SEAL & SPRING SEAT INSTALL. | 1 | |
| GS15615-1 | HOLDER BEARING SLEEVE | 1 | |
| GS15616-1 | BEARING, DUMMY | 1 | |
| GS15620-1 | DRIVER, BEARING | 1 | |
| GS15848-1 | HOLD THE PROPELLER DURING DISASSEMBLY, ASSEMBLY AND TEST | 8 | |
| GS16194-1 | SPRING HOLDER | 1 | |
| GS18257 | MASTER RING GUAGE SET - FLUID TRANSFER SLEEVE TESTING | 1 | |
| GS18258 | MASTER RING GUAGE - FLUID TRANSFER SLEEVE TESTING | 1 | |
| GS18298-1 | WITH GS18300-1 ADAPTER KIT DURING PROPELLER BALANCING | 6 | |
| GS18299-1 | USED WITH GS18298 INDICATOR KIT DURING PROPELLER BALANCING | 2 | |
| GS19473-1 | CONTROL SHAFT BEARING DRIVER | 1 | |
| GS19474-1 | DEPTH MEASURING FIXUTRE | 2 | |
| GS19817-1 | WITH GS20876-1, TO SECURE YOKE DURING DISASSEMBLY AND ASSEMBLY | 3 | |
| GS19821-1 | EXPAND THE ACTUATOR SEAL DURING ASSEMBLY | 2 | |
| GS19854-1 | EXPANDER, RING SEAL | 1 | |
| GS19855-1 | EXPANDER, RING SEAL | 1 | |
| GS19856-1 | EXPANDER, RING SEAL | 1 | |
| GS19857-1 | EXPANDER, RING SEAL | 1 | |
| GS19858-1 | EXPANDER, RING SEAL | 1 | |
| GS19859-1 | EXPANDER, RING SEAL | 1 | |
| GS20287-1 | SPRING GUIDE JFC68-8 | 1 | |
| GS20386-1 | EXPANDER, RING SEAL | 1 | |
| GS20391-1 | HOLD AND ALING THE BLADE PIN DURING INSTALLATION | 2 | |
| GS20834-1 | DUTRING BLADE ANGLE MEASUREMENT | 4 | |
| GS20864-1 | BLADE ANGEL MEASURING ADAPTER | 3 | |
| GS20868-1 | COVER SPRING ASSY ADJUSTING TOOL | 1 | |
| GS20879-1 | WITH GS20406-1 DURING BLADE PIN REPLACEMENT | 2 | |
| GS20889-1 | KIT, NEEDIE BEARING AND PLUG DRIVER | 1 | |
| GS20925-1 | KIT GAUGE DUMMY SPRING | 3 | |
| GS20956-1 | NEEDLE BEARING PULLER | 1 | |
| GS21026-1 | TQ.MOTOR/COVER AND SPRING INSTALL.TOOL | 8 | |
| GS22030-1 | HOLDER, SPRING | 1 | |
| GS23185-1 | CLOSURE KIT (HAMILTON SUNDSTRAND'S FUEL METERING UNIT MODEL NO. JFC131-4, CMM 73-21-76), | 1 | |
| GS24323-1 | TORQUE ADAPTER, BLADE RING | 1 | |
| GS24324-1 | BEARING SLEEVE INSTALLATION AND REMOVAL TOOL | 1 | |
| GSB0800002 | KIT-NOSE AND MAIN WHEEL MEASURING ADAPTER | 1 | |
| GSB0800003 | ADAPTER-MAIN WHEEL MEASURING | 4 | |
| GSB2010001 | RING - LOCKOUT CIRCUIT BREAKER (RED) | 2 | |
| GSB2700011 | BEARING,PROOF LOADING TOOL KIT | 1 | |
| GSB3241004 | RING-NLG BEADBREAKER | 1 | |
| GSB3241009 | RING-MLG BEADBREAKER | 1 | |
| GSB3241010 | RING-NLG BEADBREAKER | 1 | |
| GSB3241011 | RING-MLG BEADBREAKER | 1 | |
| GSB3241012 | RING-MLG BEADBREAKER | 1 | |
| GSB3251004 | DHC8 Q400 NLG STEERING PROTRACTOR (3 PARTS) | 2 | |
| GSB3251005 | ADAPTOR KIT FOR PROTRACTOR-NLG STEERING ANGLE | 3 | |
| GSB3251005-IAS | ADAPTOR KIT NLG STEERING PROTRACTOR Q100,200,300 | 1 | |
| GSB5231001 | TEST FIXTURE P/N: GSB5231001 TO BE USED IN TESTING JXH AFT BAGGAGE DOOR GAS SPRINGS INTEGRITY. | 1 | |
| GSB5235001 | PULLER-BAGGAGE DOOR COUNTERBALANCE SPRING | 1 | |
| GSB5260001 | TOOL-AIRSTAIR DOOR GAS SPRING INSTALLATION | 4 | |
| GSB5260001-B | TOOL; TOOL, A/S DOOR GAS SP; TOOL-GAS SPRING DOOR | 1 | |
| GSE170-LTC52015 | SPRING COMPRESSOR, PASSENGER AND SERVICE DOORS | 3 | |
| GSE196-LTC52073 | COMPRESSOR, SPRING ROD-OVERWING EMERGENCY DOOR | 1 | |
| GSE196-LTC52075 | COMPRESSOR, SPRING - PAX & SERV DOORS | 1 | |
| GSE196-LTC52077 | DEVICE, SPRING STRETCHER-PAX & SERV DOORS | 1 | |
| GSE196-LTC52077 | DEVICE,SPRING STRETCHER-PAX AND SERV DOORS | 1 | |
| GSE5100759 | SPRING SCALE, 50 - 250 POUNDS (22.68 - 113.4 KG) | 1 | |
| GSE55758 | A380 WEDGE-LOCK SPRING EXPANSION TOOL BODY LANDING GEAR | 1 | |
| GSE55787 | COMPRESSION TOOL LOCKING SPRING WING LANDING GEAR | 1 | |
| GSE55904 | KIT-LOWER BEARING, R I, BLG AND WLG | 1 | |
| GSE55930 | CONE - GUIDE, STEERING ACTUATOR, BLG | 1 | |
| GSE55934 | EXPANDER - SPRING, BLG | 1 | |
| GSE55940 | REMOVAL TOOL METERING PIN WING LANDING GEAR | 1 | |
| GSE55952 | EXPANDER - SPRING, WLG | 1 | |
| GSE56017 | Bearing installation shields | 1 | |
| GSE57669NC | AFT AXLE STEERING SAFETY DEVICE BLG | 1 | |
| GSE57818 | SPRING EXPANDER-LOCK STAY | 1 | |
| GSP02841R150 | FAIRING, SIDE KIT, CNT | 1 | |
| GSP02842R150 | FAIRING, SIDE KIT, CNT | 1 | |
| GSP02851F150 | FAIRING,SIDE KIT | 1 | |
| GSP02853P150 | FAIRING,SIDE KIT | 1 | |
| GSP03802B150 | FAIRING SIDE KIT CNT | 1 | |
| GT9910014-GT0001-0055 | COMPRESSION TOOL, A220 CARGO DOOR SPRING | 1 | |
| Gedore-010100 | Gedore 010100 ADS4 - Dial Measuring Torque Wrench, Range : 0.8-4.0 N.m / 7-35 lbf.in | 1 | |
| Gedore-010108 | Gedore 010108 ADS4S - Dial Measuring Torque Wrench, Range : 0.8-4.0 N.m / 7-35 lbf.in | 1 | |
| Gedore-010120 | Gedore 010120 ADS8 - Dial Measuring Torque Wrench, Range : 1.6-8.0 N.m / 14-75 lbf.in | 1 | |
| Gedore-010128 | Gedore 010128 ADS8S - Dial Measuring Torque Wrench, Range : 1.6-8.0 N.m / 14-75 lbf.in | 1 | |
| Gedore-010140 | Gedore 010140 ADS12D - Dial Measuring Torque Wrench, Range : 2.4-12 N.m / 24-120 lbf.in | 1 | |
| Gedore-010148 | Gedore 010148 ADS12DS - Dial Measuring Torque Wrench, Range : 2.4-12 N.m / 24-120 lbf.in | 1 | |
| Gedore-010160 | Gedore 010160 ADS12A - Dial Measuring Torque Wrench, Range : 2.4-12 N.m / 24-120 lbf.in | 1 | |
| Gedore-010168 | Gedore 010168 ADS12AS - Dial Measuring Torque Wrench, Range : 2.4-12 N.m / 24-120 lbf.in | 1 | |
| Gedore-010180 | Gedore 010180 ADS25 - Dial Measuring Torque Wrench, Range : 5-25 N.m / 48-240 lbf.in | 1 | |
| Gedore-010188 | Gedore 010188 ADS25S - Dial Measuring Torque Wrench, Range : 5-25 N.m / 48-240 lbf.in | 1 | |
| Gedore-010200 | Gedore 010200 ADS25F - Dial Measuring Torque Wrench, Range : 5-25 N.m / 4-20 lbf.ft | 1 | |
| Gedore-010208 | Gedore 010208 ADS25FS - Dial Measuring Torque Wrench, Range : 5-25 N.m / 4-20 lbf.ft | 1 | |
| Gedore-010220 | Gedore 010220 ADS40 - Dial Measuring Torque Wrench, Range : 8-40 N.m / 72-360 lbf.in | 1 | |
| Gedore-010228 | Gedore 010228 ADS40S - Dial Measuring Torque Wrench, Range : 8-40 N.m / 72-360 lbf.in | 1 | |
| Gedore-010240 | Gedore 010240 ADS40F - Dial Measuring Torque Wrench, Range : 8-40 N.m / 6-30 lbf.ft | 1 | |
| Gedore-010248 | Gedore 010248 ADS40FS - Dial Measuring Torque Wrench, Range : 8-40 N.m / 6-30 lbf.ft | 1 | |
| Gedore-010300 | Gedore 010300 BDS80A - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| Gedore-010320 | Gedore 010320 BDS80E - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| Gedore-010340 | Gedore 010340 BDS160 - Dial Measuring Torque Wrench, Range : 32-160 N.m / 24-120 lbf.ft | 1 | |
| Gedore-010360 | Gedore 010360 BDS200 - Dial Measuring Torque Wrench, Range : 40-200 N.m / 30-160 lbf.ft | 1 | |
| Gedore-010380 | Gedore 010380 BDS80AS - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| Gedore-010400 | Gedore 010400 BDS80ES - Dial Measuring Torque Wrench, Range : 16-80 N.m / 12-60 lbf.ft | 1 | |
| Gedore-010410 | Gedore 010410 BDS100EF - Dial Measuring Torque Wrench, Range : 20-100 N.m / 14-70 lbf.ft | 1 | |
| Gedore-010415 | Gedore 010415 BDS100E - Dial Measuring Torque Wrench, Range : 20-100 N.m / 168-840 lbf.in | 1 | |
| Gedore-010420 | Gedore 010420 BDS160S - Dial Measuring Torque Wrench, Range : 32-160 N.m / 24-120 lbf.ft | 1 | |
| Gedore-010440 | Gedore 010440 BDS200S - Dial Measuring Torque Wrench, Range : 40-200 N.m / 30-160 lbf.ft | 1 | |
| Gedore-010520 | Gedore 010520 CDS400S - Dial Measuring Torque Wrench, Range : 80-400 N.m / 60-300 lbf.ft | 1 | |
| Gedore-010620 | Gedore 010620 DDS800S - Dial Measuring Torque Wrench, Range : 160-800 N.m / 120-600 lbf.ft | 1 | |
| Gedore-010700 | Gedore 010700 EDS1400 - Dial Measuring Torque Wrench, Range : 280-1400 N.m / 200-1000 lbf.ft | 1 | |
| Gedore-010720 | Gedore 010720 EDS2000 - Dial Measuring Torque Wrench, Range : 400-2000 N.m / 300-1500 lbf.ft | 1 | |
| Gedore-012250 | Gedore 012250 3.2mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012255 | Gedore 012255 4mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012260 | Gedore 012260 5mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012265 | Gedore 012265 5.5mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012270 | Gedore 012270 6mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012275 | Gedore 012275 7mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012280 | Gedore 012280 8mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012285 | Gedore 012285 9mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012290 | Gedore 012290 10mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012295 | Gedore 012295 11mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012300 | Gedore 012300 12mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012305 | Gedore 012305 13mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012310 | Gedore 012310 14mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012315 | Gedore 012315 15mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012320 | Gedore 012320 16mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012325 | Gedore 012325 17mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012330 | Gedore 012330 18mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012335 | Gedore 012335 19mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012340 | Gedore 012340 20mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012345 | Gedore 012345 21mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012350 | Gedore 012350 22mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012355 | Gedore 012355 23mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012360 | Gedore 012360 24mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012365 | Gedore 012365 25mm TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012400 | Gedore 012400 5/32 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012405 | Gedore 012405 3/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012410 | Gedore 012410 7/32 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012415 | Gedore 012415 1/4 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012420 | Gedore 012420 5/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012425 | Gedore 012425 3/8 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012430 | Gedore 012430 7/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012435 | Gedore 012435 1/2 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012440 | Gedore 012440 9/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012445 | Gedore 012445 5/8 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012450 | Gedore 012450 11/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012455 | Gedore 012455 3/4 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012460 | Gedore 012460 13/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012465 | Gedore 012465 7/8 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012470 | Gedore 012470 15/16 TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012475 | Gedore 012475 1in. TB RING END, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-017400 | Gedore 017400 TT50 FH BLUE - Dial Measuring Torque Screwdriver, Range : 10-50 cN.m / 14-70 ozf.in | 1 | |
| Gedore-017500 | Gedore 017500 TT100 FH BLUE - Dial Measuring Torque Screwdriver, Range : 20-100 cN.m / 28-140 ozf.in | 1 | |
| Gedore-017600 | Gedore 017600 TT250 FH BLUE - Dial Measuring Torque Screwdriver, Range : 50-250 cN.m / 4-20 lbf.in | 1 | |
| Gedore-017700 | Gedore 017700 TT500 FH BLUE - Dial Measuring Torque Screwdriver, Range : 100-500 cN.m / 8-40lbf.in | 1 | |
| Gedore-027220 | Gedore 027220 7 mm RING END 8792-07, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027240 | Gedore 027240 8 mm RING END 8792-08, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027260 | Gedore 027260 9 mm RING END 8792-09, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027280 | Gedore 027280 10 mm RING END 8792-10, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027300 | Gedore 027300 11 mm RING END 8792-11, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027320 | Gedore 027320 12 mm RING END 8792-12, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027340 | Gedore 027340 13 mm RING END 8792-13, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027360 | Gedore 027360 14 mm RING END 8792-14, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027380 | Gedore 027380 15 mm RING END 8792-15, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027400 | Gedore 027400 16 mm RING END 8792-16, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027420 | Gedore 027420 17 mm RING END 8792-17, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027440 | Gedore 027440 18 mm RING END 8792-18, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027460 | Gedore 027460 19 mm RING END 8792-19, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027480 | Gedore 027480 20 mm RING END 8792-20, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027500 | Gedore 027500 21 mm RING END 8792-21, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027520 | Gedore 027520 22 mm RING END 8792-22, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027540 | Gedore 027540 23 mm RING END 8792-23, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027560 | Gedore 027560 24 mm RING END 8792-24, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027600 | Gedore 027600 26 mm RING END 8792-26, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027620 | Gedore 027620 27 mm RING 8792-27, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027720 | Gedore 027720 5/16" RING END 8792-5/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027740 | Gedore 027740 3/8" RING END 8792-3/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027750 | Gedore 027750 7/16" RING END 8792-7/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027760 | Gedore 027760 1/2" RING END 8792-1/2AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027780 | Gedore 027780 9/16" RING END 8792-9/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027790 | Gedore 027790 5/8" RING END 8792-5/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027800 | Gedore 027800 11/16" RING END 8792-11/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027810 | Gedore 027810 3/4" RING END 8792-3/4AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027820 | Gedore 027820 13/16" RING END 8792-13/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027840 | Gedore 027840 7/8" RING END 8792-7/8AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027850 | Gedore 027850 15/16" RING END 8792-15/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027860 | Gedore 027860 1" RING END 8792-1AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027880 | Gedore 027880 1 1/16" RING END 8792-1.1/16AF, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-027920 | Gedore 027920 1 3/16" RING END, Torque Wrench End Fittings (16 mm Spigot) | 1 | |
| Gedore-7677940 | Gedore 7677940 9x12 RECTANGULAR RING END FITTING A/F 12, Torque Wrench End Fittings | 1 | |
| Gedore-7678080 | Gedore 7678080 9x12 RECTANGULAR RING END FITTING A/F 16, Torque Wrench End Fittings | 1 | |
| Gedore-7678160 | Gedore 7678160 9x12 RECTANGULAR RING END FITTING A/F 18, Torque Wrench End Fittings | 1 | |
| Gedore-7678240 | Gedore 7678240 9x12 RECTANGULAR RING END FITTING A/F 21, Torque Wrench End Fittings | 1 | |
| Gedore-7691340 | Gedore 7691340 9x12 RECTANGULAR RING END FITTING A/F 7, Torque Wrench End Fittings | 1 | |
| Gedore-7691420 | Gedore 7691420 9x12 RECTANGULAR RING END FITTING A/F 8, Torque Wrench End Fittings | 1 | |
| Gedore-7691690 | Gedore 7691690 9x12 RECTANGULAR RING END FITTING A/F 10, Torque Wrench End Fittings | 1 | |
| Gedore-7691770 | Gedore 7691770 9x12 RECTANGULAR RING END FITTING A/F 11, Torque Wrench End Fittings | 1 | |
| Gedore-7691930 | Gedore 7691930 9x12 RECTANGULAR RING END FITTING A/F 13, Torque Wrench End Fittings | 1 | |
| Gedore-7692230 | Gedore 7692230 9x12 RECTANGULAR RING END FITTING A/F 14, Torque Wrench End Fittings | 1 | |
| Gedore-7692580 | Gedore 7692580 9x12 RECTANGULAR RING END FITTING A/F 15, Torque Wrench End Fittings | 1 | |
| Gedore-7692740 | Gedore 7692740 9x12 RECTANGULAR RING END FITTING A/F 17, Torque Wrench End Fittings | 1 | |
| Gedore-7692820 | Gedore 7692820 9x12 RECTANGULAR RING END FITTING A/F 19, Torque Wrench End Fittings | 1 | |
| Gedore-7693040 | Gedore 7693040 9x12RECTANGULAR RING END FITTING A/F 22, Torque Wrench End Fittings | 1 | |
| Gedore-A29010 | Gedore A29010 ADAPTOR RING - 11mm, | 1 | |
| H-1000-A | DUROMETER (SPRING FORCE 0-822G) | 1 | |
| H140AMV218M | DAMPING SPRING CHECKING TOOL | 1 | |
| H150E-1000-18 | H150 HELIPORTER - X-SERIES W/ POWER STEERING (SKID LIFT) | 1 | |
| H21977010 | GRADUATED STEERING SECTOR | 1 | |
| H250E-3100-10 | STEERING ROD | 1 | |
| H250E-5000-1 | STEERING HANDLE | 1 | |
| H57A08W270B-001 | GAS SPRING HYDRAULIC RELEASE | 1 | |
| HA-23006778 | C20 2 ½ BEARING GUIDE | 1 | |
| HA-67-10-00-72 | T/R Long Rod Bearing Tool AS350 | 1 | |
| HA1604-001 | DEVICE FOR MEASURING TIRE PRESSURE | 1 | |
| HAY-FAIDIV4 | 4" SPRING DIVIDERS | 1 | |
| HAY-FAIDIV8 | 8" SPRING DIVIDERS | 1 | |
| HAZ GOODS DOC FEE | FEE FOR PREPARING HAZARDOUS GOODS DOCUMENTS | 1 | |
| HAZ GOODS DOCS FEE | FEE FOR PREPARING HAZ GOODS SHIPPING DOCS | 1 | |
| HBL5266C | HUBBELL WIRING DEVICE-KELLEMS HBL5266C Straight Blade Male Plug, 15A, IP20 Rated, 3 Contacts | 1 | |
| HC130H0212-000 | Hook - tensator spring baggage bay door | 1 | |
| HC130H0213-000 | Clamp - tensator spring baggage bay door | 2 | |
| HC523H0587-001 | DRUM ASSY-SPRING | 1 | |
| HC600-1P7 | BIOCIDE METERING INJECTION EQUIPMENT, PN NOT FIND | 4 | |
| HCP28-2 | HANDLE SPRING | 1 | |
| HCS2044 | INFRARED CURING SYSTEM | 1 | |
| HCS2044-10-T | CURING SYSTEM-INFRARED | 2 | |
| HCS2044-10T | HEATCON INFRARED CURING SYSTEM | 2 | |
| HCS2044-20-T | INFRARED CURING SYSTEMS | 1 | |
| HCS2044-30-01-120 | HEAT LAMPS, QUARTZ TUBE, 1600W, 120V, 13.33 AMP, METAL STAND WITH CASTERS AND GAS SPRING ARM | 1 | |
| HCS2044-41 | INFRARED CURING SYSTEM | 1 | |
| HCS7500 | DEBULKING AND CURING TABLE | 1 | |
| HCU200-FULL-BNC | HCU200-FULL-BNC;HCU200BNC with Full Mactrak Capabilities Including Mactrak Performance Monitoring. Includes AC Adapter | 1 | |
| HCU200-FULL-F | HCU200-FULL-F;HCU200F with Full Mactrak Capabilities Including Mactrak Performance Monitoring. Includes AC Adapter | 1 | |
| HCU200MCMON-UPG | HCU200MCMON-UPG;HCU200 MACTRAK PERFORMANCE MONITORING OPTION FIELD UPGRADE | 1 | |
| HE38000-1 | FLANGED BEARING | 1 | |
| HE38100-11 | TAPERED ROLLER BEARING | 1 | |
| HE38500-1 | FLANGED BEARING | 1 | |
| HE52B | HEADLAMP SPRING TOOL | 1 | |
| HE89800-1 | STEERING CYLINDER | 1 | |
| HH99A-T1 | HANDLE AND PROBE SET, DIGITAL THERMOMETER OMEGA ENGINEERING INC. CAGE CODE: 29907. (MODEL HDX-SET-FSP-T-OST, MODE HH99A-T1) | 1 | |
| HIX3010-0G | J-RING CHECK TOOL CFM56-5 LOAN LHT BUD | 2 | |
| HIX3011-0 | OUTER FLANGE ADAPTOR RING | 1 | |
| HJ-512 | RING, GUIDE | 2 | |
| HJ-554 | RING, GUIDE | 2 | |
| HJ-706 | RING, GUIDE | 1 | |
| HJ512 | GUIDERING, | 2 | |
| HJ554 | GUIDE RING, | 2 | |
| HJ706 | GUIDE RING, | 1 | |
| HK1212 | NEEDLE BEARING 12ID X 18OD | 1 | |
| HKYHFT50 | HYDRA ASSIST FLARING TOOL SET | 1 | |
| HOI-HCF01015 | HARRINGTON 11'X15' CF HAND CHAIN HOIST | 1 | |
| HP-6000-40 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR W/ FAIRING | 1 | |
| HP-6150-33 | SKID STRAP RING | 1 | |
| HP-9200-2 | REINFORCED BEARING | 1 | |
| HP1460200-5-A | REPAIR AND OVERHAUL OF ACTUATOR, NOSE WHEEL STEERING | 1 | |
| HP1460200-7-A | NOSE WHEEL STEERING ACTUATOR OVERHAUL (FOR PRESENT FUGA AL APPLY 3,000 P.S.I. PRESENTING DRIP GREATER THAN 1 DROP FOR EVERY 25 CYCLES) | 1 | |
| HPK6 | HAND BEARING COMPASS | 1 | |
| HPK67 | HAND BEARING COMPASS | 1 | |
| HPPE303K-S4 | TEST STAND - HYDRAULIC, PORTABLE ELECTRIC DRIVEN, 30 GPM, 3000 PSI. WHEN ORDERING, SUPPLY THE LOCAL ELECTRICAL, HOSE L (AMERICAN LAB & SYSTEMS) | 1 | |
| HRK-02 | RAT GROUND TEST MOTORING EQUIP. | 2 | |
| HRR683-20 | 5/8 BLACK FORD SPRING LK | 1 | |
| HRR683-21 | 3/4 BEIGE FORD SPRING LK | 1 | |
| HRR683-22 | 1/2 BLUE FORD SPRING LK | 1 | |
| HRR683-23 | 3/8 RED FORD SPRING LK | 1 | |
| HRT-02 | GROUND TEST MOTORING EQPT - RAM AIR TURBINE | 4 | |
| HS-02A | SOLDERING IRON, FNIRSI HIGH CONFIGURATION | 1 | |
| HS-3665-1 | CLAMP - SIP RING. SOLDERING | 1 | |
| HS-7633 | SLIDE, SLIP RING BRUSH | 5 | |
| HS-7711 | MOLD - FAIRING | 1 | |
| HS1633 | SLIDE SLIP RING BRUSH | 1 | |
| HS2-23200 | NLG DOWNLOCK SPRING REMOVAL / INSTALLATION TOOL | 2 | |
| HS5-23100 | COLUMN RINGS LEADING TOOL | 1 | |
| HS6651 | ROTOR BEARING ADAPTOR | 2 | |
| HS6981 | DRIVER BEARING | 1 | |
| HS7287 | DRIVER BEARING | 1 | |
| HS7326 | DRIVER BEARING | 1 | |
| HS7380 | DRIVER BEARING & BUSHI | 1 | |
| HS7381 | DRIVER BEARING & BUSHI | 1 | |
| HS7382 | DRIVER BEARING & BUSHI | 1 | |
| HS7384 | DRIVER BEARING & BUSHI | 1 | |
| HS7385 | DRIVER - BEARING &BUSHING | 1 | |
| HS7386 | DRIVER BEARING & BUSHI | 1 | |
| HS7387 | DRIVER BEARING & BUSHI | 1 | |
| HS7389 | DRIVER BEARING & BUSHI | 1 | |
| HS7390 | DRIVER BEARING & BUSHI | 1 | |
| HS7391 | DRIVER BEARING & BUSHI | 1 | |
| HS7393 | DRIVER BEARING & BUSHI | 1 | |
| HS7394 | DRIVER BEARING & BUSHI | 1 | |
| HS7512 | DRIVER BEARING | 1 | |
| HS7522 | PLIERS - SPACER, DIFFERENTIAL GEAR BEARING | 1 | |
| HS7557 | MECHANICAL PULLER - TORQUE AND BEARING SHAFT | 1 | |
| HS7633 | SLIDE SLIP RING BUSHING | 5 | |
| HS7635 | RING - BLADE GEAR HOLDING | 1 | |
| HS7711 | BLADE FAIRING MOLD | 1 | |
| HS7838 | DRIVER BEARING & BUSHI | 1 | |
| HS7843 | DRIVER BEARING & BUSHI | 1 | |
| HS8092 | DRIVER BEARING | 1 | |
| HS8391 | DRIVER BEARING | 1 | |
| HS8472 | DRIVER BEARING | 1 | |
| HS8474 | DRIVER BEARING | 1 | |
| HS8568 | DRIVER BEARING & BUSHI | 1 | |
| HS8657 | DRIVER BEARING & BUSHI | 1 | |
| HS8664 | DRIVER BEARING & BUSHI | 1 | |
| HS8819 | DRIVE BEARING & BUSHING | 1 | |
| HS8930 | DRIVER BEARING | 1 | |
| HS8933 | DRIVER BEARING | 1 | |
| HS8962 | SLIP RING ASSEMBLY ADAPTOR | 2 | |
| HS9145 | DRIVER BEARING AND BUSHING | 1 | |
| HS9147 | FIXTURE PRELOAD TORSION SPRING | 1 | |
| HS9330 | DRIVER - BEARING & BUSHING | 1 | |
| HS9594 | ADAPTER SPRING COMPRES | 1 | |
| HS9814 | DRIVER BEARING | 1 | |
| HSA7582 | RING TAB 2IN DOUBLE 5PK | 1 | |
| HSA7584 | RING TAB 4IN QUAD 3PK | 1 | |
| HSP1975 | ADAPTER SLIP RING ASSY | 1 | |
| HSP2914 | DRIVER BEARING | 1 | |
| HSP3665 | CLAMP SLiPRING SOLDERING | 1 | |
| HT-500-010P-64 | O-RING FOR FLUID TANK CAP | 1 | |
| HT-7MR | BAC HT-7MR TOW-BAR, 140 IN L, RING, POWDER-COATED, ORANGE | 5 | |
| HT-8 | BELL 212, 412, UH-1, AH-1 HELICOPTER SKID TOW BAR WITH 2" RING | 1 | |
| HT-88 | BAC HT-88 TOW-BAR, 144 IN L, RING, POWDER-COATED, | 4 | |
| HT7MR | BAC HT-7MR Tow-Bar, 140 in L, Ring, Powder-Coated, Orange | 5 | |
| HT88 | BAC HT-88 Tow-Bar, 144 in L, Ring, Powder-Coated, Orange, For Bell UH-1, 205, 212, 412 Aircrafts | 4 | |
| HT8R | BAC HT-8R Tow-Bar, 12 ft L, Ring, Powder-Coated, Orange, For Bell 212, 412, UH-1, AH-1 Aircrafts | 2 | |
| HU18493 | BEARING ADAPTER | 1 | |
| HU19382-5 | BLADING RING | 1 | |
| HU21567 | RING-FAN BLADE RETAINER | 1 | |
| HU21570 | ADAPTER - FRONT BEARING HOUSING AND LOW PRESSURE BEARING FEED | 1 | |
| HU21572 | ADAPTER - DISTRIBUTOR BLOCK TO INT. WHEEL CASE & TURBINE BEARINGS | 1 | |
| HU21580 | LOAD CHECK / SPRING SCALE | 8 | |
| HU22699 | ADAPTER - BEARING, L.P. TURBINE | 1 | |
| HU23959 | TOOL - OPENING, PR DOORS GG FAIRINGS | 1 | |
| HU25431 | ADAPTER RING | 1 | |
| HU26664 | BLADE ASSY FIXTURE (RING 6082 ALLY) | 1 | |
| HU28621 | IP/LP Module Transport Stand Ring, bolts to HU28618 | 1 | |
| HU34274 | CURVIC ASSY W/BEARING "DUMMY SHAFT" | 1 | |
| HU36991 | RING - SUPPORT LP TURBINE AND FAN SHAFT | 2 | |
| HU36992 | RING - SUPPORT LP TURBINE AND FAN SHAFT | 2 | |
| HU37374-2 | MEASURING BRIDGE | 1 | |
| HU37468 | SUPPORT RING - LP TURBINE SPEED | 1 | |
| HU37648 | SUPPORT RING - LP TURBINE SPEED | 4 | |
| HU39392 | BRIDGE-PULLS LWR SPLITTER FAIRING | 1 | |
| HU40371 | THIMBLE - FIT O RING TO UNION MS21916-8-6 PRYOR TO FITTING TO HYD PUMP NO2 | 3 | |
| HU40372 | THIMBLE - FIT O RING TO UNION MS21902-16R PRYOR TO FITTING TO HYDRPUMP NO2 | 3 | |
| HU40373 | THIMBLE - FIT O RING TO UNION MS21902-20R PRYOR TO FITTING TO HYDR PUMP NO2 | 3 | |
| HU40522 | ADAPTOR RING | 1 | |
| HU40941-2 | MEASURING BRIDGE | 1 | |
| HU41500-1 | GUIDE RING | 1 | |
| HU50255 | GUIDE RING | 1 | |
| HU50255-1 | GUIDE RING | 1 | |
| HU51160 | ADAPTOR RING | 1 | |
| HU51409 | LEVER - OPEN VIGV BY LEVERING STARBOARD RAM. | 10 | |
| HU55151-1 | BRACE - HOLD OPEN, ATTACH FAN COWL DOOR TO TRU DURING ENGINE CHANGE. (RH) | 13 | |
| HU55152-1 | BRACE - HOLD OPEN, ATTACH FAN COWL DOOR TO TRU DURING ENGINE CHANGE. (LH) | 12 | |
| HU55181-1 | ADAPTER - SPRING, INSTALL / REMOVE HS GEARBOX. | 6 | |
| HU55423-5 | PLATFORM SPRING-ROLL,OVER STAND | 1 | |
| HU84119 | ADPT RING | 1 | |
| HU87115 | TOOL INSTL, BEARING PIVOT DOOR | 6 | |
| HU89025-9 | A330 Front ring spreader rubber protection gasket | 1 | |
| HV/LCD | LCD Series Video Measuring Instrument for Digital Brinell Micro Vickers Hardness Tester | 1 | |
| HYGROFLEX 8 | HUMIDITY & TEMPERATURE MONITORING | 1 | |
| IAE 1P17763 | IAE 1P17763 METERING PLUG DRIFT | 1 | |
| IAE 1P17766 | IAE 1P17766 METERING PLUG HOLDER | 1 | |
| IAE 3P16434 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 1 | |
| IAE1F10007 | PULLER, REMOVAL - ENGINE ASSY, ROTATING RING, STARTER / fuel & hydraulic pump SHAFT, GEARBOX | 12 | |
| IAE1F10009 | PULLER, IDG GEARBOX MATING RING REMOVAL | 14 | |
| IAE1F10032 | PUSHER,IDG MATING RING | 11 | |
| IAE1F10069 | DEOILER RING PULLER | 14 | |
| IAE1F10070 | DEOILER RING PULLER. | 14 | |
| IAE1F10089 | RING, REMOVAL LHT Dwg No.(537260034) | 1 | |
| IAE1F10115 | RING, REMOVAL LHT Dwg No.(537260057) | 1 | |
| IAE1F10209 | TOOL FOR INSTALLING AND REMOVING COMMON METAL PARTS, FOR MANUAL USE, USED DURING AIRCRAFT REPAIR. | 1 | |
| IAE1F10239 | TOOL FOR INSTALLING AND REMOVING COMMON METAL PARTS, FOR MANUAL USE, USED DURING AIRCRAFT REPAIR. | 1 | |
| IAE1F10243 | RING, REMOVE LHT Dwg No.(537260144) | 5 | |
| IAE1F10244 | RING, REMOVE LHT Dwg No.(537260145) | 1 | |
| IAE1F10245 | RING, REMOVE LHT Dwg No.(537260146) | 1 | |
| IAE1F10246 | RING, REMOVE LHT Dwg No.(537260147) | 1 | |
| IAE1F10247 | RING, REMOVE LHT Dwg No.(537260148) | 1 | |
| IAE1F10248 | RING, REMOVE LHT Dwg No.(537260149) | 1 | |
| IAE1F10249 | RING, REMOVE LHT Dwg No.(537260150) | 1 | |
| IAE1F10254 | RING, REMOVE LHT Dwg No.(537260154) | 5 | |
| IAE1J12020 | LEVER - FAIRING AND INLET CONE REMOVAL PULLER | 17 | |
| IAE1J12118 | STAND STORAGE-LP STUB SHAFT AND NO1 BEARING SUPPORT ASSY INTERMEDIATE | 1 | |
| IAE1J12119 | ADAPTER EXTENSION INTERNAL GEARBOX AND BEARING SUPPORT ASSY INTERMEDIATE | 1 | |
| IAE1J12125 | HAMMER, SLIDING-INLET CONE FAIRING | 12 | |
| IAE1J12125 REVB | HAMMER,SLIDING - INLET CONE FAIRING | 1 | |
| IAE1J12141 | BOLT- PUSHER FAN BLADE RETAINING RING | 16 | |
| IAE1J12188 | BOLT- PULLER FAN BLADE RETAINING RING | 24 | |
| IAE1J12364 | HOLDER, MEASURING | 1 | |
| IAE1J12502 | GUIDE,BEARING | 1 | |
| IAE1J12504 | RING HOLDER | 1 | |
| IAE1J12506 | GUIDE,BEARING | 1 | |
| IAE1J13001 | FRONT BRACKET FLANSCH A RINGLHT Dwg No.(537220026) | 2 | |
| IAE1M14080 | RING, CLAMPING LHT Dwg No.(537250121) | 1 | |
| IAE1M14081 | RING, CLAMPING LHT Dwg No.(537250122) | 1 | |
| IAE1M14089 | RING, CLAMPING LHT Dwg No.(537250124) | 1 | |
| IAE1M14142 | RING, CLAMPING LHT Dwg No.(537250143) | 1 | |
| IAE1P16061 | RING, SUPPORT LHT Dwg No.(537250162) | 1 | |
| IAE1P16368 | RING, SUPPORT LHT Dwg No.(537250184) | 1 | |
| IAE1P16567 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 3 | |
| IAE1P17763 | DRIFT, METERING PLUG | 1 | |
| IAE1P17766 | HOLDER, METERING PLUG | 1 | |
| IAE1R18021 | RING, SUPPORT LHT Dwg No.(537230046) | 1 | |
| IAE1R18027 | IAE 1R18027 INDEXING RING | 1 | |
| IAE1R18222 | RING, SUPPORT LHT Dwg No.(537230090) | 1 | |
| IAE1R18250 | RING, SPLIT ASSY. LHT Dwg No.(537230096) | 1 | |
| IAE1R18692 | RING, INDEXING | 1 | |
| IAE1R18693 | RING, SUPPORT LHT Dwg No.(537230150) | 1 | |
| IAE1R18831 | RING, SUPPORT LHT Dwg No.(537230188) | 1 | |
| IAE3J12713 | BLADE RETAINING RING-PEEN TOOL | 2 | |
| IAE3R19320 | TEMPLATE AIRBUS -FAN BLADE MEASURING | 2 | |
| IAPL4101-12 | ANVIL STYLE PROOF LOAD TOOL FOR BEARING MS14101-12 | 1 | |
| IDCT4101-12 | DRILL PRESS CUTTING TOOL FOR BEARING MS14101-12 | 1 | |
| IDCT4101-4 | Drill Press Mounted CutterTool for bearing MS14101-4 | 1 | |
| IDCT4101-6 | Drill Press Cutting Tool for Bearing MS14101-6, MS14103-6. | 1 | |
| IDCT4103-10 | Drill Press Cutting Tool for Bearing MS14103-10 | 1 | |
| IDCT4103-12 | Drill Press Cutting Tool for Bearing MS14103-12 | 1 | |
| IDCT4103-5 | DRILL PRESS CUTTING TOOL FOR BEARING MS14103-5 | 1 | |
| IDCT4103-6 | Drill Press Cutting Tool for Bearings MS14101-6 and MS14103-6 ** RKC4103-6 is equivalent to IDCT4103-6** | 1 | |
| IDCT4103-8 | DRILL PRESS CUTTING TOOL FOR BEARING MS14103-8 | 1 | |
| IDST-BACB10FH05G | DRILL PRESS TRI-ROLLER SWAGING TOOL TO SUIT BACB10FH05G BEARING | 1 | |
| IDST-M81936/1-22R | DRILL-PRESS TRI ROLLER SWAGING TOOL FOR BEARING M81936/1-22R | 1 | |
| IDST-M81936/1-24 | STEERING CYLINDER SIVAGING TOOL IPL1-490 | 1 | |
| IDST2128 | Drill Press Tri-Roller Swaging Tool for Bearing 412--010-427-101 | 2 | |
| IDST2345 | Drill Press Tri-Roller Swaging Tool for Bearing 412-310-400-107 ** Technical Equivalent For RST2345 ** | 2 | |
| IDST4101-10 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-10. Equivalent to RST1013 | 1 | |
| IDST4101-12 | DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14101-12 | 2 | |
| IDST4101-14 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-14 | 2 | |
| IDST4101-3 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-3 | 2 | |
| IDST4101-6 | Drill Press Tri-Roller Swaging Tool for Bearing MS14101-6, MS14103-6 | 2 | |
| IDST4103-12 | DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14103-12 OR EN4265AN12 | 1 | |
| IDST4103-5 | DRILL PRESS TRI ROLLER SWAGING TOOL FOR BEARING | 1 | |
| IDST4103-8 | DRILL PRESS TRI-ROLLER SWAGING TOOLING FOR BEARING | 1 | |
| IFR0 | Ionic Systems Ionic RO Membrane With 4 Red O Rings | 2 | |
| IFR4000 | ON-BOARD MEASURING DEVICE FOR TESTING NAVIGATION AND COMMUNICATION | 33 | |
| IM182R | 3/4DR RBR LOCK RING | 1 | |
| IM243R | 3/4DR RBR LOCK RING | 1 | |
| IM445R | 1 1/2DR RBR LOCK RING | 1 | |
| IM483R | 1DR RBR LOCK RING | 1 | |
| IMZ5-SMZ5 | IMPEDANCE MEASURING CLAMP | 1 | |
| INDEPENDENT130 | GAS SOLDERING GUN | 1 | |
| INIMD99-603 | 41" Bearing Buddy Coil | 1 | |
| IOAST-4D0121-24 | ANVIL STAKING TOOL TO SUIT BEARING 4D0121-24 | 1 | |
| IPBT4104-10 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14102-10) | 1 | |
| IPBT4104-14 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14102-14) | 1 | |
| IPBT4104-6 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14102-6) | 1 | |
| IPBT4104-7 | BREAKAWAY TORQUE TEST TOOL (ALL KIT PARTS EXCLUDING TORQUE WRENCH) FOR BEARING MS14104-7) | 1 | |
| IPBTK4103-5 | BREAKAWAY TORQUE TEST TOOL TO SUIT MS14103-5 BEARING KIT INCLUDES A 1/4" DRIVE TORQUE WRENCH WITH A MEMORY NEEDLE | 1 | |
| IPCT-P21160P20 | Portable Cutting Tool for Bearing P21160P20 and P21160P30 | 1 | |
| IPCTI-P21160 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P21160 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P21160P20 | SPECIAL PORTABLE CUTTING TOOL FOR BERAING P21160P20 AND P21160P30 WITH UPGRADE STEEL,STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P21760 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P21760 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P24490 | SPECIAL PORTABLE CUTTING TOOL FOR BEARING P24490 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPCTI-P2A2360 | PORTABLE CUTTING TOOL SUITABLE FOR BEARING P2A2360 AND P2A2360/P10 WITH UPGRADED STEEL, STRONGER SPRING AND PVD COATING | 1 | |
| IPIK4101-10 | PORTABLE INSTALL AND REMOVAL KIT FOR MS14101-10 BEARING | 1 | |
| IPIK4101-12 | PORTABLE INSTALL AND REMOVAL KIT FOR BEARING | 1 | |
| IPIK4101-6 | Portable Install and Removal Kit for MS14101-6 Bearing. This Kit includes: IPST4101-6 IPCT4101-6 IPIR4101-6 | 2 | |
| IPIK4101-7 | Portable Install and Removal Kit for MS14101-7 Bearing. This Kit includes: IPST4101-7 IPCT4101-7 IPIR4101-7 | 2 | |
| IPIR-P21160 | PORTABLE INSTALL/REMOVE TOOL SUITABLE FOR BEARING P21160, P21160P05, AND P21160P10 | 1 | |
| IPIR-P2A2360 | PORTABLE INSTALL/REMOVE TOOL SUITABLE FOR BEARING P2A2360 AND P2A2360P10 | 1 | |
| IPIR4101-4 | TOOLS FOR REMOVING AND INSTALLING BEARINGS | 2 | |
| IPIR4103-12 | PORTABLE INSTALL AND REMOVE TOOL FOR BEARING MS14103-12 | 1 | |
| IPIR4103-5 | TOOLS FOR REMOVING AND INSTALLING BEARINGS | 1 | |
| IPIR410L-4 | TOOLS FOR REMOVING AND INSTALLING BEARINGS | 1 | |
| IPL1-490 | STEERING CYLINDER SIVAGING TOOL IPL1-490 | 1 | |
| IPPLP-P21160 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT P21160 BEARINGS. | 1 | |
| IPPLP-P21760 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT P21760 BEARINGS. | 1 | |
| IPPLP-P22970 | PORTABLE PROOF LOAD TOOL FOR BEARING P22970 | 1 | |
| IPPLP-P24490 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT P24490 BEARINGS | 1 | |
| IPPLP4103-8 | ADAPTER KIT TO CONVERT PORTABLE PROOF LOAD KIT TO SUIT MS14103-8 BEARINGS | 1 | |
| IPPLP4104-10 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-10) | 1 | |
| IPPLP4104-14 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-14) | 1 | |
| IPPLP4104-6 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14102-6) | 1 | |
| IPPLP4104-7 | ADAPTER KIT WHICH IS ABLE TO BE USED TOGETHER WITH? DIGITAL LOAD MITER IHH500 PRO; ELECTRONIC PROOF LOAD CELL WITH A MAXIMUM LOAD CAPACITY 5 000 POUNDS (FOR BEARING MS14104-7) | 1 | |
| IPST-P21160 | PORTABLE TRI-ROLLER SWAGING TOOL SUITABLE FOR BEARING P21160, P21160P05, AND P21160P10 | 1 | |
| IPST-P2A2360 | PORTABLE TRI-ROLLER SWAGING TOOL SUITABLE FOR BEARING P2A2360 AND P2A2360P10 | 1 | |
| IRODA PRO-25LK | PORTABLE SOLDERING KIT | 1 | |
| ISUWEL7135W | SOLDERING TIP | 1 | |
| IT1000 | INFRARED CURING LAMP | 1 | |
| ITCHDNR-8 | SPRING HOLDER | 1 | |
| IV96-AT120D/FF | IPLEX NX TIP ADAPTOR: OPTICAL TIP ADAPTOR FOR IV96 IPLEX NX INDUSTRIAL VIDEOSCOPES · OUTER DIAMETER: 6.0MM · FIELD OF VIEW: 120° DIRECTION OF VIEW: 0° DIRECT VIEW · FAR FOCUS · DEPTH OF FIELD: 19MM TO INFINITY · DISTAL END LENGTH: 21.4MM · O-RING QTY 6 IN | 1 | |
| J060157-1 | SHORING - DC9/MD80 CANTED FRAME-TAIL | 1 | |
| J07008-1 | SLING - RECOVERY, LIFTING AND TETHERING | 3 | |
| J07008-22 | SLING - RECOVERY, LIFTING AND TETHERING | 2 | |
| J07008-30 | SLING - RECOVERY, LIFTING AND TETHERING | 5 | |
| J07018-1 | Restraint eqpt-tethering，entry doors | 1 | |
| J10012-14 | WHEEL STOP - MAIN LANDING GEAR, MOORING, HIGH WIND | 1 | |
| J10012-18 | WHEEL STOP - MAIN LANDING GEAR, MOORING, HIGH WIND | 1 | |
| J20005-38 | D-ring | 1 | |
| J20009-110 | JACK - HYDRAULIC - SPL-1561 (AFT FAIRING REMOVAL) | 12 | |
| J23004-1 | CABLE ASSEMBLY - CABIN VIDEO MONITORING SYSTEM (CVMS), P56 PANEL | 2 | |
| J23004-58 | CABLE ASSEMBLY - CABIN VIDEO MONITORING SYSTEM (CVMS), P56 PANEL | 1 | |
| J23004-59 | ETHERNET CABLE - CABIN VIDEO MONITORING SYSTEM, P56 PANEL | 1 | |
| J27036 | CRADLE-FLAP SUPPORT FAIRING,REMOVAL&INSTL | 1 | |
| J27036-53 | CRADLE - FLAP SUPPORT FAIRING, REMOVAL AND INSTALLATION | 4 | |
| J27048-1 | REMOVAL/INSTALLATION EQUIPMENT - NO. 3 AND NO. 6 FLAP FAIRING | 1 | |
| J27048-14 | REMOVAL/INSTALLATION EQUIPMENT - NO. 3 AND NO. 6 FLAP FAIRING SPRING | 8 | |
| J27057-21 | MEASUREMENT EQUIPMENT - BEARING WIDTH | 1 | |
| J27057-22 | Measurement Equipment - Bearing Width | 1 | |
| J27057-29 | Measurement Equipment - Bearing Width | 2 | |
| J27093-1 | CRADLE - FLAP SUPPORT FAIRING, REMOVAL AND INSTALLATION | 2 | |
| J27137-25 | RIGGING EQUIPMENT – DROOP PANEL TO INBD FLAP FILLET FAIRING | 1 | |
| J27158-1 | Rigging tool droop panel fillet fairing to side body | 1 | |
| J27158-2 | Rigging tool droop panel fillet fairing to side body | 1 | |
| J32001 | MEASURING EQUIPMENT - BRAKE PEDAL | 1 | |
| J32001-31 | Equipment Measuring Brake Pedal | 1 | |
| J32001-39 | Equipment, Measuring Brake Pedal Load | 1 | |
| J32001-43 | BRAKE PEDAL LOAD AND TRAVEL (DUAL PEDAL) MEASURING EQUIPMENT | 1 | |
| J32001-46 | BRAKE PEDAL LOAD AND TRAVEL (DUAL PEDAL) MEASURING EQUIPMENT | 1 | |
| J32001-63 | Measuring Equipment - Brake Pedal | 2 | |
| J32001-64 | Measuring Equipment - Brake Pedal | 5 | |
| J32001-67 | Measuring Equipment - Brake Pedal | 8 | |
| J32001-68 | Measuring Equipment - Brake Pedal | 8 | |
| J32001-68-REVG | MEASURING EQUIPMENT - BRAKE PEDAL | 1 | |
| J32001-81 | MEASURING EQPT - BRAKE PEDAL | 1 | |
| J3200164 | MEASURING EQUIPMENT - BRAKE PEDAL | 5 | |
| J32009-30 | Thread Protector Retainer Ring | 1 | |
| J32014-104 | LOAD TRANSFER RING | 1 | |
| J32014-116 | Replacement Equipment -Lower Bearing Seals. Main Landing Gear (Mlg) | 11 | |
| J32014-33 | Grand nut Scraper Ring Retainer Assembly | 1 | |
| J32014-89 | Replacement Equipment -Lower Bearing Seals. Main Landing Gear (Mlg) | 2 | |
| J32020-1 | SLING - STEERING AND TRUCK POSITIONER ACTUATORS, MAIN LANDING GEAR | 6 | |
| J32020-10 | SLING - STEERING AND TRUCK POSITIONER ACTUATORS, MAIN LANDING GEAR | 1 | |
| J32020-14 | SLING - STEERING AND TRUCK POSITIONER ACTUATORS, MAIN LANDING GEAR | 4 | |
| J32020-15 | SLING - STEERING AND TRUCK POSITIONER ACTUATORS, MAIN LANDING GEAR | 5 | |
| J32037-102 | MLG&NLG SPRING EXPENDER R/I TOOL | 1 | |
| J32037-105 | EQUIP SPRING EXTEND | 3 | |
| J32037-106 | Spring Removal/Installation Equipment - Main Landing Gear and Nose Landing Gear | 19 | |
| J32037-116 | Spring rem/ins eq't, MLG and NLG (140) | 1 | |
| J32037-119 | SPRING REMOVAL / INSTALLATION EQUIPMENT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 2 | |
| J32037-120 | SPRING REMOVAL / INSTALLATION EQUIPMENT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 2 | |
| J32037-121 | SPRING REMOVAL / INSTALLATION EQUIPMENT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 2 | |
| J32037-122 | SPRING REMOVAL / INSTALLATION EQUIPMENT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 7 | |
| J32037-123 | SPRING REMOVAL / INSTALLATION EQUIPMENT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 4 | |
| J32037-126 | SPRING REMOVAL / INSTALLATION EQUIPMENT - MAIN LANDING GEAR AND NOSE LANDING GEAR | 1 | |
| J32037-138 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) | 6 | |
| J32037-139 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) | 4 | |
| J32037-165 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR (MLG) AND NOSE LANDING GEAR (NLG) | 1 | |
| J32037-83 | SPRING EXTENDER ASSY | 1 | |
| J32037-95 | SPRING END FITTING | 1 | |
| J32042-14 | WRENCH - SPANNER, MLG AFT TRUNION BEARING (INCLUDED IN J32042-89 KIT) | 3 | |
| J32052-1 | EXTENSION BAR - FUNCTIONAL TEST, NOSE LANDING GEAR STEERING | 13 | |
| J32058-1 | CHECK EQUIPMENT - BACKLASH, NOSE LANDING GEAR STEERING GEARBOX | 2 | |
| J32067 | FIXTURE FUNCTIONAL TEST LANDING GEAR SPRINGS | 1 | |
| J32067-1 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 2 | |
| J32067-155 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 1 | |
| J32067-2 | LANDING GEAR SPRINGS ASSEMBLY FUNCTIONAL TEST, | 1 | |
| J32067-46 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 2 | |
| J32067-47 | LANDING GEAR SPRINGS ASSEMBLY FUNCTIONAL TEST | 1 | |
| J32067-85 | FIXTURE - FUNCTIONAL TEST, LANDING GEAR SPRINGS | 4 | |
| J32067-86 | FUNCTIONAL TEST LANDING GEAR SPRINGS FUNCTIONAL TE | 2 | |
| J32075-1 | SPRING EQUIPMENT - MAIN LANDING GEAR SIDE STRUT | 1 | |
| J32075-42 | SPRING EQUIPMENT - MAIN LANDING GEAR SIDE STRUT | 2 | |
| J32082-2 | Gland Nut Scraper Ring Retainer Ay | 1 | |
| J32082-62 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 1 | |
| J32082-69 | Replacement Equipment -Lower Bearing Seals. Main Landing Gear (Mlg) | 1 | |
| J32082-73 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 6 | |
| J32082-98 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 8 | |
| J32084-33 | 2nd Stage Upper Sizing Ring | 1 | |
| J32084-34 | 2nd Stage Lower Sizing Ring | 1 | |
| J32090-1 | Spring Removal/Installation Equipment -Main Landing Gear | 1 | |
| J32090-17 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR | 6 | |
| J32090-53 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR | 5 | |
| J32090-56 | Spring Removal/Installation Equipment -Main Landing Gear | 1 | |
| J32090-57 | Spring Removal/Installation Equipment -Main Landing Gear | 2 | |
| J32090-69 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR | 2 | |
| J32090-70 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR | 7 | |
| J32101-1 | Spring removal and installation eqpt-MLG | 1 | |
| J46002-13 | BREAKOUT BOX - FIBER OPTIC, ARING 600 CONNECTOR (THALES DIGITAL SERVER UNIT) | 4 | |
| J46002-3 | BREAKOUT BOX - FIBER OPTIC, ARING 600 CONNECTOR (THALES DIGITAL SERVER UNIT) | 1 | |
| J46002-8 | BREAKOUT BOX - FIBER OPTIC, ARING 600 CONNECTOR (THALES DIGITAL SERVER UNIT) | 1 | |
| J46098 | TORQUE ADAPTER BEARING | 1 | |
| J46100 | TORQUE ADAPTER BEARING | 1 | |
| J47097 | ASSEMBLY CONE FOR GUIDE RINGS | 2 | |
| J47098 | RESIZING RING FOR GUIDE RINGS | 2 | |
| J47548 | USED FOR PROTECTING THE NLG WHEEL AXLE DURING THE REMOVAL AND INSTALLATION OF THE WHEEL. | 38 | |
| J47549 | USED FOR TIGHTENING AND LOOSENING THE NUT, SECURING THE WHEEL TO THE NLG. | 42 | |
| J47564 | ADAPTOR, NLG, SECURING SHOCK ABSORB | 25 | |
| J47564. | ADAPTOR - SECURING SHOCK ABSORB NLG LEG | 25 | |
| J47893 | MLG UPLOCK LOAD MEASURING TOOL | 8 | |
| J4995 | 13 PIECE ROUND HEAD HEX KEY SET, FRACTIONAL MEASURING UNIT | 2 | |
| J5100 | 9PC 3/8'' SQUARE DRIVE INCH 12PT RING SPANNER SET | 2 | |
| J52021-1 | SCREW EQUIPMENT - SAFETY, PASSENGER DOOR COUNTERBALANCE SPRING | 9 | |
| J52025-1 | SPRING HOLDER EQPT | 5 | |
| J52026-1 | COMPRESSION EQUIPMENT - BULK CARGO DOOR COUNTERBALANCE SPRING | 8 | |
| J52031-1 | TOOL - SPRING COMPRESSION, PASSENGER ENTRY DOORS | 2 | |
| J54004-131 | EQUIPMENT - REMOVAL/INSTALLATION,AFT STRUT FAIRING (PRE-MODE) | 6 | |
| J54004-132 | EQUIPMENT - REMOVAL/INSTALLATION, AFT STRUT FAIRING (APPLICABLE TO 777 LINE NUMBER 1346 AND ON) | 2 | |
| JBC20772000 | Glide Bearings x 8 ( 2-0772) | 1 | |
| JCSJC2505 | 5PK 1/4DR 3RET/3ORING PER PK | 1 | |
| JCSWSF-1 | 3/8 & 1/2 SNAP RING DISPLAY | 1 | |
| JEADASH8006 | DASH 8 N/W STEERING SOLENOID TOOL | 1 | |
| JF4N52 | SEAL-QUAD RING | 2 | |
| JHW6-1A | 3/4 DR. O-RING 1-7/16 | 1 | |
| JHW6-4XS | 3/4 DR RET RING HV CRH GGE 2 | 1 | |
| JHW7-1B | 1 DR. O-RING 1-3/4 | 1 | |
| JHW7-1C | 1 DR. O-RING 2-7/8 | 1 | |
| JHW7-1XS | 1DR RET RING CRH GGE 1-3/4 | 1 | |
| JHW7-2XS | 1DR RET RING HV VRH GGE 2 | 1 | |
| JHW7-3XS | 1DR RET RING CRH GGE 2-1/8 | 1 | |
| JHW7-4XS | 1DR RET RING CRH GGE 2-1/4 | 1 | |
| JHW7-5XS | 1DR RET RING CRH GGE 2-1/2 | 1 | |
| JHW7-6XS | 1DR RET RING CRH GGE 2-5/8 | 1 | |
| JHW9-1D | 1-1/2 DR O-RING 4-5/8 | 1 | |
| JHW9-2G | 1-1/2 DR RETAINING RING 4-1/2 | 1 | |
| JHWPL-1620 | SNAP RING PLIER 0 DEGREE | 1 | |
| JHWPL-1621 | SNAP RING PLIER 45 DEGREE | 1 | |
| JHWPL-1622 | SNAP RING PLIER 90 DEGREE | 1 | |
| JHWPL-1623 | SNAP RING PLIER 0 DEGREE | 1 | |
| JHWPL-1624 | SNAP RING PLIER 45 DEGREE | 1 | |
| JHWPL-1625 | SNAP RING PLIER 90 DEGREE | 1 | |
| JHWPL-1626 | SNAP RING PLIER 0 DEGREE | 1 | |
| JHWPL-1627 | SNAP RING PLIER 45 DEGREE | 1 | |
| JHWPL-1628 | SNAP RING PLIER 90 DEGREE | 1 | |
| JHWPL-1629 | SNAP RING PLIER 0 DEGREE | 1 | |
| JHWPL-1630 | SNAP RING PLIER 45 DEGREE | 1 | |
| JHWPL-1631 | SNAP RING PLIER 90 DEGREE | 1 | |
| JHWPL-529 | HVY DTY SNAP RING PLIERS SET | 1 | |
| JHWPL-531 | FIXED TIP RET. RING PLIER-INT. | 1 | |
| JHWPL-532 | FIXED TIP RET. RING PLIER-INT. | 1 | |
| JHWPL-533 | FIXED TIP RET. RING PLIER-EXT. | 1 | |
| JHWPL-534 | FIXED TIP RET. RING PLIER-EXT. | 1 | |
| JMP/HER/D/1851/C200 | Hercules C130 T56 Spray Ring (Adjustable nozzle) | 1 | |
| JMP/T56/D/1847/C200 | P3 Orion T56 Spray Ring (Adjustable nozzle) | 1 | |
| JP-159 | SPRING: DI WINCH, | 1 | |
| JST-050 | CANOPY/ENGINE/TURTLEDECK COVER, for trailering with folded wings (set of 2) | 1 | |
| JST-060 | TURTLEDECK ONLY COVER, for trailering with folded wings | 1 | |
| K-1/16 | #50 (1/16") Standard Spring Cleco | 1 | |
| K-1/4 | 1/4" Standard Spring Cleco | 3 | |
| K-1/8 | 1/8" (#30) Standard Spring Cleco - MADE IN USA! | 6 | |
| K-144 | #27 (.144) Standard Spring Cleco | 1 | |
| K-177 | #16 (.177) Standard Spring Cleco | 1 | |
| K-3/16 | 3/16" (#10) Standard Spring Cleco - MADE IN USA! | 3 | |
| K-3/32 | 3/32" (#40) Standard Spring Cleco - MADE IN USA! | 2 | |
| K-4084 | KIT, CHECK BALL AND SPRINGS | 1 | |
| K-4557 | MEDIUM DUTY SPRINGS (FOR JACKS BUILT BEFORE 2012) | 2 | |
| K-5/32 | 5/32" (#20 / #21) Standard Spring Cleco - MADE IN USA! | 3 | |
| K-7/32 | 7/32" Standard Spring Cleco | 1 | |
| K-7/64 | 7/64" Standard Spring Cleco | 1 | |
| K0059224 | EXTENDED FRAME ANCHORING | 1 | |
| K0654 | BEARING SUBASSEMBLY, MACHINED LOWER | 1 | |
| K1-4 | 1/4" STANDARD SPRING CLECO | 3 | |
| K1-8 | 1/8" (#30) STANDARD SPRING CLECO - MADE IN USA! | 6 | |
| K10005-33 | TETHERING RESTRAINT - ENTRY DOORS | 1 | |
| K10005-34 | TETHERING RESTRAINT - ENTRY DOORS | 1 | |
| K10010 | TETHERING EQPT -0 INBD & OUTBD FLAP SUPPORT | 1 | |
| K10010-21 | TETHERING EQUIPMENT - INBOARD AND OUTBOARD FLAP SUPPORT | 1 | |
| K10010-22 | TETHERING EQUIPMENT - INBOARD AND OUTBOARD FLAP SUPPORT | 1 | |
| K20002 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,ENGINE/STRUT | 1 | |
| K20002-10 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,ENGINE/STRUT | 1 | |
| K20002-27 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,ENGINE/STRUT | 1 | |
| K20002-30 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,ENGINE/STRUT | 1 | |
| K20002-5 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,ENGINE/STRUT | 1 | |
| K20003 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-10 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-11 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-12 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-13 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-14 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-15 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-16 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-17 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-18 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-19 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-2 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-20 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-21 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-22 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-23 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-24 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-25 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-26 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-27 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-28 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-29 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-3 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-30 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-31 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-32 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-33 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-34 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-35 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-36 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-37 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-38 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-39 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-4 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-40 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-41 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-43 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-5 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-7 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-8 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20003-9 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,UPPER WING | 1 | |
| K20004 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,HORIZONTAL STABILIZER | 1 | |
| K20004-32 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,HORIZONTAL STABILIZER | 1 | |
| K20004-34 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,HORIZONTAL STABILIZER | 1 | |
| K20004-36 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,HORIZONTAL STABILIZER | 1 | |
| K20004-6 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,HORIZONTAL STABILIZER | 1 | |
| K20004-7 | PERSONNEL EQPT-SHOCK ABSORING LANYARD,HORIZONTAL STABILIZER | 1 | |
| K20008-11 | BEARING PAD | 1 | |
| K2179 | HOOK FOR FIRING CNTRL HNDLE | 1 | |
| K27051-1 | MEASURING TOOL - EMA POSITION, SPOILER (APPLICABLE TO 787-8 AIRPLANES WITH C99144-004 ACTUATOR INSTALLED) | 7 | |
| K27051-10 | MEASURING TOOL - EMA POSITION, SPOILER (APPLICABLE TO 787-8 AND -9 AIRPLANES WITH C99144-005 AND CA99144-006 ACTUATOR INSTALLED) | 10 | |
| K27062 | RIGGING TOOL-DROOP PANEL TO INBD FLAP FILLET FAIRING | 1 | |
| K27062-1 | RIGGING TOOL - DROOP PANEL TO INBD FLAP FILLET FAIRING | 7 | |
| K27068- 11 | MEASURING TOOL - ENCODER/DISPLAY BOX SET | 5 | |
| K27068- 8 | MEASURING TOOL - ENCODER CALIBRATIONSET | 1 | |
| K27068-10 | MEASURING TOOL - ENCODER CALIB | 7 | |
| K27068-11 | Measuring Tool - Encoder/Display Box Set | 5 | |
| K27068-7 | MEASURING TOOL - ENCODER/DISPLAY BOX SET | 4 | |
| K27068-8 | MEASURING TOOL ENCOD | 1 | |
| K27068-9 | MEASURING TOOL ENCOD | 8 | |
| K28703 | DISPATCH RING KIT - LOCK OPEN (***DISPATCH***) | 2 | |
| K3000 | SOLDERING IRON TOOL | 1 | |
| K32003-1 | SPRING REMOVAL/INSTALLATION EQUIPMENT - MAIN LANDING GEAR UPLOCK AND MAIN LANDING GEAR DOOR UPLOCK | 6 | |
| K32007 | SPRING REMV'L / INST'L EQUIPMENT - DRAG BRACE MLG | 1 | |
| K32007-1 | SPRING REMOVAL/INSTALLATION EQUIPMENT - DRAG BRACE, MAIN LANDING GEAR | 7 | |
| K32008-1 | SPRING RMVL/INSTL EQPT -0 DRAG BRACE, MLG | 1 | |
| K32011-1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 2 | |
| K32011-56 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 2 | |
| K32011-63 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 3 | |
| K32011-64 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 2 | |
| K32011-90 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 4 | |
| K32011-91 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 6 | |
| K32016-7 | SLOTTED SPRING PIN | 1 | |
| K32032 | WRENCH ADAPTER STEERING NUT NLG | 1 | |
| K32032-1 | SPANNER WRENCH - STEERING NUT, NOSE LANDING GEAR | 10 | |
| K32032-2 | STEERING NUT WRENCH ADAPTOR | 2 | |
| K35001-49 | Delta ring | 1 | |
| K4557 | MEDIUM DUTY SPRINGS | 2 | |
| K5/32" | 5/32" (#20 / #21) STANDARD SPRING CLECO - MADE IN USA! | 3 | |
| K51101-105 | HOIST, RADOME/FAIRING, LTV KA, | 1 | |
| K51101-107 | SLING, RADOME,FAIRING LTV KA, | 1 | |
| K52010 | TOOL SPRING COMPRESSION PASSENGER ENTRY DOORS | 1 | |
| K52010-1 | COMPRESSION SET - SPRING, PASSENGER ENTRY DOORS | 8 | |
| K52010-11 | NEEDLE ROLLER BEARING | 1 | |
| K52010-3 | COMPRESSION ASSY-HANDLE GAS SPRING | 1 | |
| K52013 | TEST FIXTURE - BUNGEE SPRING CARGO DOOR | 1 | |
| K52021 | COMPRESSION EQUIPMENT - BULK CARGO DOOR SPRING | 1 | |
| K52025 | WRENCH-BEARING RETAINER END CAP,LIFT MECHANISM,LCD | 1 | |
| K52025-9 | WRENCH - BEARING RETAINER END CAP, LIFT MECHANISM, LARGE CARGO DOOR | 5 | |
| K52028-1 | Wrench-rem/instl，pull-in bearing retainer nut，pull-in mechanism，lcd | 5 | |
| K52045-1 | SPRING COMPRESSION EQUIPMENT - LATCH PROBE INSTALLATION, BULK CARGO DOOR | 1 | |
| K530013-1 | TORSION SPRING LOCK- PRESSURE RELIEF DOOR | 1 | |
| K53013-1 | TORSION SPRING LOCK - PRESSURE RELIEF DOOR | 1 | |
| K54001-100 | HOIST ADAPTER, B787 AFT STRUT FAIRING | 7 | |
| K652-6229-GT | ANVIL STAKING TOOL TO SUIT BEARING 4D0121-24 | 1 | |
| K6O4162-1 | PULLER ASSY LIQUID SPRING | 1 | |
| KB16222 | RING SEAL FOR FUEL TUBES AND MANIFOLDS | 1 | |
| KB27127 | RING-SEALING TOROIDAL | 3 | |
| KC135-250 | FWD CHEEK FAIRING BCS PLUG (RC135-250) | 1 | |
| KC135-251 | FWD CHEEK FAIRING LCS SCOOP PLUG (RC135-251), Left & Right Side (set of 2) | 1 | |
| KD2775 | KD Tools 2775 Wheel Bearing Hand Packer | 1 | |
| KDS3953 | E RING INSTALLER AND REMOVAL KIT | 1 | |
| KDT3492 | SNAP RING PLIERS-KD TOOLS | 1 | |
| KDT3493 | SNAP RING PLIERS-KD TOOLS | 1 | |
| KEITHLEY 2700 | MULTIMETER/DATA ACQUISITION (TEMPERATURE AND RESISTANCE MEASURING) SYSTEM | 1 | |
| KEN-516-2750K | SOLDERING IRON (75W)(KENNEDY) | 1 | |
| KEN5180120K | 12" SPRING DIVIDERS | 1 | |
| KEN5180240K | 4" SPRING TYPE INSIDE CALIPER GRIP | 1 | |
| KEN5180280K | 8" SPRING TYPE INSIDE CALIPER GRIP | 1 | |
| KEN5180520K | 12" SPRING TYPE INSIDE CALIPER GRIP | 1 | |
| KEN5186040K | 3" SPRING TYPE INSIDE CALIPER GRIP | 1 | |
| KERN281-752 | SPRING BALANCE DINAMOMETER KERN SCALE | 1 | |
| KFX-050 | CANOPY/ENGINE/TURTLEDECK COVER, for trailering with folded wings (set of 2) | 1 | |
| KH18 | HOLDER FOR SOLDERING STATION | 1 | |
| KHD-1/4 | 1/4" "KHD" Series Long Grip Spring Cleco | 2 | |
| KHD-1/8 | 1/8" "KHD" Series Long Grip Spring Cleco | 3 | |
| KHD-3/16 | 3/16" "KHD" Series Long Grip Spring Cleco | 3 | |
| KHD-3/32 | 3/32" "KHD" Series Long Grip Spring Cleco | 3 | |
| KHD-5/32 | 5/32" "KHD" Series Long Grip Spring Cleco | 3 | |
| KI-115 | SYRINGE AND PROBE FOR A184 BEARING | 1 | |
| KIT E | KIT E (W/CASE) MODELS 47/206/204/205/212 SPLINE MEASURING KIT (BELL 206B) | 1 | |
| KIT E W/ CASE | KIT-MEASURING PIN, GEAR TEETH, AND SPLINE | 1 | |
| KM57 KIT | ROSAN FITTING REPLACEMENT FOR INSTALLING O-RINGS AND REMOVING LOCKRINGS | 1 | |
| KMT0238 | CENTERING, DRIVER | 1 | |
| KSR167405BK | Bearing -Rod End | 1 | |
| KT170082 | HYDRAULIC FLARING TOOL KIT | 1 | |
| KUNZ 235.1000 | BRAKE SPRING ADAPTER | 1 | |
| L001AA01 | RESCUE SLING AND RING | 1 | |
| L134M6201101 | MEASURING DEVICE | 1 | |
| L290P7002101 | HYDROTECHNIK PRESSURE MONITORING DEVICE PUMP | 1 | |
| L290P7003101 | HYDROTECHNIK PRESSURE MONITORING DEVICE PUMP | 1 | |
| L44600LA-902A1 | TAPERED BEARING | 1 | |
| L44610 | CUP: BEARING,ROLLER,TAPERED, | 1 | |
| L623M2005101G315-01 | END MEASURING GAUGE SET | 1 | |
| LA797A001 | Spring Loading Fixture | 1 | |
| LABREF-1 | SCATTERING BODY LABYET | 1 | |
| LANVELSTRAP1 | STRAP: VELCRO WRIST W/ D-RINGS | 1 | |
| LC-045E-16 | COMP. SPRING .360 OD X .045 W X 2" LG. STAIN. STL. | 1 | |
| LC-045H-6 | INDEX SPRING | 1 | |
| LCTC2121 | FWD OIL RING PULLER | 1 | |
| LCTC31126-0301 | FWD OIL RING PULLER POST SB 0113 | 1 | |
| LCTC4700 | FWD OIL RING PULLER | 1 | |
| LDTBL12 | SPRING LOCK DISC 1/2 BLUE | 1 | |
| LDTG12 | SPRING LOCK DISC 1/2 GREEN | 1 | |
| LDTLB58 | SPRING LOCK DISC 5/8 LONG BLK | 1 | |
| LDTR38 | SPRING LOCK DISC 3/8 RED | 1 | |
| LDTSB58 | SPRING LOCK DISC 5/8 SHRT BLK | 1 | |
| LDTW34 | SPRING LOCK DISC 3/4 WHITE | 1 | |
| LDTY38 | SPRING LOCK DISC 3/8 YELLOW | 1 | |
| LE96901Z01- 17068393001000-14H | SPRING COMPRESSOR-FWD AND AFT PAX & SV DOOR EMB195 | 1 | |
| LE96901Z01-1706839300 | SPRING COMPRESSOR, PASSENGER AND SERVICE DOORS | 1 | |
| LE96901Z01-17068393001 000-14H | SPRING COMPRESSOR, PASSENGER AND SERV-ICE DOORS | 1 | |
| LE96901Z01-17068393001000-14H | SPRING COMPRESSOR, PASSENGER AND SERVICE DOORS | 1 | |
| LE96901Z0117068393001000-14H | SPRING COMPRESSOR, PASSENGER AND SERVICE DOORS | 1 | |
| LEDSOL-290 | SOLDERING IRON-DIGITAL TEMP REGULATED (DIGITAL THERMOSTAT) | 1 | |
| LEMO01 | OLYMPUS EPOCH 650 KNOB LEMO01 ULTRASONIC FLAW DETECTOR; MEASURING RANGE: 0.2 TO 26.5 MHZ; 100-240 V AC | 1 | |
| LFA90S | ECKOLD LFA90S NON-MARRING SHRINKING JAWS - MEDIUM | 2 | |
| LG-050 | SCALE - SPRING, 0-50 LBS (AMETEK) ALT DG-200 | 8 | |
| LG-100 | MECHANICAL MANUAL MEASURING DEVICE | 10 | |
| LIL19352 | GM/FORD ADAPTER W/O-RING BLK | 1 | |
| LIL19362 | FORD/MAZDA ADPTR W/O-RING BLUE | 1 | |
| LIL19402 | CHRYSLER ADPT W/O-RING PURPLE | 1 | |
| LIL39480 | 13 PC. SPRING-LOADED ALUMINUM | 1 | |
| LIL55000 | MAGNETIC SOLDERING CLAMP | 1 | |
| LIL59400 | PINION BEARING RACE DRIVER SET | 1 | |
| LIL61710 | 6 5/16IN BEARING DRIVER | 1 | |
| LIL61720 | 5 31/32IN BEARING DRIVER | 1 | |
| LIL61730 | 5 11/16IN BEARING DRIVER | 1 | |
| LIL61740 | 6IN BEARING DRIVER | 1 | |
| LIL61900 | HD BEARING AND SEAL DRIVER SET | 1 | |
| LIL61910 | 4-7/8IN BEARING DRIVER | 1 | |
| LIL61920 | 4-13/16IN BEARING DRIVER | 1 | |
| LIL61930 | 5-1/2IN BEARING DRIVER | 1 | |
| LIL61940 | 5-25/32IN BEARING DRIVER | 1 | |
| LIL61950 | 6IN BEARING DRIVER | 1 | |
| LIL61960 | 3-43/64IN BEARING DRIVER | 1 | |
| LINCOLN1162 | PORTABLE LUBRICATOR FOR PRECISE LUBRICATION DURING ENGINE MAINTENANCE | 1 | |
| LL548A057 | DUMMY BEARING | 1 | |
| LL788A010 | SCREWED RING | 1 | |
| LL789A002 | GUIDE RING | 1 | |
| LL790A004 | GUIDE RING | 1 | |
| LL797A035 | RING INSERTION GUIDE | 1 | |
| LL924A023 | DUMMY BEARING | 1 | |
| LLA797A001 | SPRING LOADING FIXTURE | 1 | |
| LLA954A033 | SPRING LOADING FIXTURE | 1 | |
| LM120749-20629 | CONE AND ROLLERS, BEARING | 1 | |
| LM4440 | RETAINING RING EXPANDER TOOL | 1 | |
| LMT 967 | DIFFUSER CASE MEASURING FIXTURE | 1 | |
| LSLMVA660 | POWER STEERING EVAC ADAPTOR | 1 | |
| LST50377 | DIVIDER 4IN W/QUICK SPRING NUT | 1 | |
| LST52682 | SCALE SPRING TEMPERED | 1 | |
| LST67793 | END MEASURING ROD | 1 | |
| LTCT12084-01 | FLOW FENCE RING GAGE - CLOSED | 1 | |
| LTCT12869-01 | Tool, No. 3 Bearing and Seal, Removal/Installation | 1 | |
| LTCT13803 | Damping Ring, Compressor Rotor Assembly | 1 | |
| LTCT13874-01 | TOOL INSTALLATION - BEARING PACKAGE NO. 4 AND 5 | 3 | |
| LTCT14684 | Pusher – Forward Bearing Retainer | 1 | |
| LTCT14759-01 | Tool Assembly, No. 1 Bearing and Housing, and No. 1 Seal Installation | 1 | |
| LTCT14763-01 | Puller Assembly, Mechanical, No. 1 Bearing and Housing | 1 | |
| LTCT14796-01 | Fan Bearing Dowel Support Assembly Pins | 1 | |
| LTCT14803-01 | Housing, Dummy Bearing | 1 | |
| LTCT25548-01 | Fairing Assembly, Referee Nozzle and Core Cowl | 1 | |
| LTCT4012 | DRIVER,BEARING REMO | 1 | |
| LTCT4027 | BEARING HOLDER | 1 | |
| LTCT4028 | Holder, Bearing | 1 | |
| LTCT4029 | Holder, Bearing | 1 | |
| LTCT7202-01 | FIXTURE, HOLDING NO. 4 AND 5 BEARING OIL TUBE | 1 | |
| LTCT7613-01 | PULLER DIFFUSER & #2 BEARING ASSY | 1 | |
| LW92007 | RING COMPRESSOR DISK | 1 | |
| LX-770 | MULTI PURPOSE SOLDERING KIT | 1 | |
| M.DX7061N2-0 | HOLDING FIXTURE TO HOLD THE MANIFOLD ASSEMBLY DURING ASSEMBLY/ DISASSEMBLY | 1 | |
| M0NT23856-1 | MANDREL FOR FITTING RING | 1 | |
| M0NT23856-2 | MANDREL FOR FITTING RING | 1 | |
| M0NT23856-3 | MANDREL FOR FITTING RINGS | 1 | |
| M0NT23875-1 | MANDREL FOR FITTING RING | 1 | |
| M0NT23891 | SPRING LOADING DEVICE | 1 | |
| M0NT24059 | MANDREL FOR ASSEMBLY OF BEARINGS | 1 | |
| M0NT24060 | MANDREL FOR ASSEMBLY OF BEARINGS | 1 | |
| M0NT716182 | ASSEMBLY TEFLON RING TRANSDUCER | 1 | |
| M0NT733063 | TOOL ASSEMBLY, DISASSEMBLY SPRINGS | 1 | |
| M11029-2 | CORD (HEAVING RING AND LINE ASSEMBLY) | 1 | |
| M12 SI | M12 SOLDERING IRON | 1 | |
| M20-101 | ENGINE INLET PLUGS, Lasar mod (Cowl Enclosure Fairing) (set of 2) | 1 | |
| M21929 | EXPANDER SPRING NLG | 26 | |
| M280G | SOLDERING IRON | 1 | |
| M46154 | PIN WRENCH THREADED RINGS | 2 | |
| M46158 | EXTRACTOR THREADED RING | 2 | |
| M46164 | TOOL MEASURING DIMENSIONS | 2 | |
| M46166 | PIN WRENCH THREADED RINGS | 2 | |
| M46228 | ADAPTER - LOCKING SPRING NLG A320NEO | 5 | |
| M46347 | TOOL TO HOLD THE LOCK ASSEMBLY DURING INSTALLATION OF THE TARGETS | 2 | |
| M47787 | Castellated Wrench For Installation And Removal OF Ring | 2 | |
| M65724365A-040 | ADJUSTING SWITCH TOOL -MEASURING GAGE | 1 | |
| M83248/1-230 | SEAL RING-HYDRAULIC FLUID, RUBBER | 1 | |
| M83461-1-008 | O' RING, FLUID HYDRAULIC, RUBBER | 1 | |
| MA-800G | AID,SOLDERING | 1 | |
| MA280012-104 | R/I EQUIPMENT- BOOM PIVOT DOOR SPRINGS | 1 | |
| MA280012-39 | SPRING,DOOR,ADJUSTABLE | 1 | |
| MA280012-78 | R/I EQUIPMENT- BOOM PIVOT DOOR SPRINGS | 1 | |
| MA280027-29 | TEMPORARY FLOORING, FORWARD LOWER LOBE | 1 | |
| MA280035-1 | DRIVER,BEARING AND BUSHING | 1 | |
| MA280061-1 | KIT - COUPLING RING - FUEL MANIFOLD | 1 | |
| MA280066-1 | TORSION SPRING PRELOAD KIT | 1 | |
| MA40471 | END RING OF 3/4 TON HOIST (P/N: A3134JM-7YU) | 1 | |
| MACR20 | CELL NUMBERING DISPLAY CHANGE | 1 | |
| MAJ-1735D | STEREO MEASURING TIP -FORWARD | 1 | |
| MAJ-1735S | STEREO MEASURING TIP -SIDE | 1 | |
| MAJ-1736D | STEREO MEASURING TIP -FORWARD | 1 | |
| MAJ-1736S | STEREO MEASURING TOIP -SIDE | 1 | |
| MAJ1245 | PROBE SPIRAL STRING VIDEOSCOPE. | 1 | |
| MAR-78 | WIRE RETAINING RING INSTALLATION AND REMOVE TOOL | 1 | |
| MAR95720 | PISTON HEAD PACKING RING | 1 | |
| MAR95722 | PISTON HEAD SPRING WASHER | 1 | |
| MB56C902-3 KIT | BRUSH AND BEARING - MOTOR SERVICE KIT | 1 | |
| MBEU55767 | SPANNER PEG, DROGUE GUN FIRING UNIT | 1 | |
| MBEU57397 | ADAPTER, TEST-SEAT FIRING BREECH | 1 | |
| MBEU57834 | HOLDING FIXTURE-FIRING UNITS | 1 | |
| MBEU57920 | ADAPTER, SEAT FIRING BREECH | 1 | |
| MBT 250 | Packing List For one year Consumable Tool Soldering PACE | 1 | |
| MBT 250 Digital | Packing List For one year Consumable Tool Soldering | 1 | |
| MBT 250 ESD | Packing List For one year Consumable Tool Soldering | 1 | |
| MBT 301 E | Packing List For one year Consumable Tool Soldering | 1 | |
| MBT 350/80 | Packing List For one year Consumable Tool Soldering | 1 | |
| MCH-100-A | HEAT GUN & SOLDERING (A&B) | 1 | |
| MCH-100-AB | HEAT GUN & SOLDERING (A&B) | 1 | |
| MCH-116 | KIT SOLDERING | 1 | |
| ME11B14 | NEEDLE BEARING | 1 | |
| ME11B26 | NEEDLE ROLLER BEARING | 1 | |
| ME11B28 | NEEDLE BEARING | 1 | |
| ME11B34 | NEEDLE BEARING w/OIL SEAL | 1 | |
| ME1A187 | RATCHET HEAD SPRING | 1 | |
| ME1C27 | DOUBLE TORSION SPRING | 1 | |
| ME65B06709-1 | MECHANICAL EQUIPMENT - WORK PLATFORM, LEADING EDGE FAIRINGS | 3 | |
| ME7-4925MK.2 | AXLE JACK (SWICKY ENGINEERING LTD) | 1 | |
| ME7A356 | 3/4 HD RETAINING RING | 1 | |
| ME7B133 | O-RING - OIL IMPREGNATED | 1 | |
| ME7B137 | O-RING (.145 x .070") 70D | 1 | |
| ME7B152 | O-RING (.228 x .050") 70D | 1 | |
| ME7B51 | O RING 489 ID | 1 | |
| ME7B68 | O-RING 551 I.D. | 1 | |
| ME7B92 | O RING RAT SD | 1 | |
| ME9513 | METRIC SPRING SCALE MODEL ME9513 | 1 | |
| MED6296N2 | CENTRING DEVICE GUIDE | 1 | |
| MEGOHM BRIDGEHAND CRANK GE | INSULATION RÉSISTANCE MEASURING DEVICE. | 1 | |
| MF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
| MF9820DEK | LOCK RING DRIVE TOOL | 1 | |
| MFLAS4020-CO | PROFESSIONAL VIDEO ENDOSCOPE COMPLETE WITH MANAGEMENT SOFTWARE, INTERCHANGEABLE OPTICS AND WITH THE POSSIBILITY OF MEASURING. | 1 | |
| MG011W | Bowers MG011W MicroGauge 2-Point Bore Gauge Measuring Head 0.95-1.15mm | 1 | |
| MG012W | Bowers MG012W MicroGauge 2-Point Bore Gauge Measuring Head 1.07-1.25mm | 1 | |
| MG013W | Bowers MG013W MicroGauge 2-Point Bore Gauge Measuring Head 1.17-1.35mm | 1 | |
| MG014W | Bowers MG014W MicroGauge 2-Point Bore Gauge Measuring Head 1.27-1.45mm | 1 | |
| MG015W | Bowers MG015W MicroGauge 2-Point Bore Gauge Measuring Head 1.37-1.55mm | 1 | |
| MG016W | Bowers MG016W MicroGauge 2-Point Bore Gauge Measuring Head 1.50-1.90mm | 1 | |
| MG017W | Bowers MG017W MicroGauge 2-Point Bore Gauge Measuring Head 1.80-2.20mm | 1 | |
| MG018W | Bowers MG018W MicroGauge 2-Point Bore Gauge Measuring Head 2.05-2.45mm | 1 | |
| MG019W | Bowers MG019W MicroGauge 2-Point Bore Gauge Measuring Head 2.25-2.75mm | 1 | |
| MG020W | Bowers MG020W MicroGauge 2-Point Bore Gauge Measuring Head 2.50-3.00mm | 1 | |
| MG021W | Bowers MG021W MicroGauge 2-Point Bore Gauge Measuring Head 2.75-3.25mm | 1 | |
| MG022W | Bowers MG022W MicroGauge 2-Point Bore Gauge Measuring Head 3.00-3.50mm | 1 | |
| MG023W | Bowers MG023W MicroGauge 2-Point Bore Gauge Measuring Head 3.25-3.75mm | 1 | |
| MG024W | Bowers MG024W MicroGauge 2-Point Bore Gauge Measuring Head 3.50-4.00mm | 1 | |
| MG025W | Bowers MG025W MicroGauge 2-Point Bore Gauge Measuring Head 3.75-4.25mm | 1 | |
| MG026W | Bowers MG026W MicroGauge 2-Point Bore Gauge Measuring Head 3.65-4.35mm | 1 | |
| MG027W | Bowers MG027W MicroGauge 2-Point Bore Gauge Measuring Head 4.15-4.85mm | 1 | |
| MG028W | Bowers MG028W MicroGauge 2-Point Bore Gauge Measuring Head 4.65-5.35mm | 1 | |
| MG029W | Bowers MG029W MicroGauge 2-Point Bore Gauge Measuring Head 5.15-5.85mm | 1 | |
| MG030W | Bowers MG030W MicroGauge 2-Point Bore Gauge Measuring Head 5.65-6.35mm | 1 | |
| MG031W | Bowers MG031W MicroGauge 2-Point Bore Gauge Measuring Head 6.15-6.85mm | 1 | |
| MG032W | Bowers MG032W MicroGauge 2-Point Bore Gauge Measuring Head 6.65-7.35mm | 1 | |
| MG033W | Bowers MG033W MicroGauge 2-Point Bore Gauge Measuring Head 7.15-7.85mm | 1 | |
| MG034W | Bowers MG034W MicroGauge 2-Point Bore Gauge Measuring Head 7.65-8.35mm | 1 | |
| MG035W | Bowers MG035W MicroGauge 2-Point Bore Gauge Measuring Head 8.15-8.85mm | 1 | |
| MG036W | Bowers MG036W MicroGauge 2-Point Bore Gauge Measuring Head 8.65-9.35mm | 1 | |
| MG037W | Bowers MG037W MicroGauge 2-Point Bore Gauge Measuring Head 9.15-9.85mm | 1 | |
| MG038W | Bowers MG038W MicroGauge 2-Point Bore Gauge Measuring Head 9.65-10.35mm | 1 | |
| MG9025 | BEARING GUIDE | 1 | |
| MG9025-01 | BEARING GUIDE | 1 | |
| MH600 | PORTABLE LEEB HARDNESS TESTER (MEASURING RANGE: 170~960 HLD) | 1 | |
| MHP-1 | PUMP - MANUAL, HAND FOR CRIMP TOOL. 10,000 PSI OUTPUT, AUTO SWITCHING FROM LOW TO HIGH OUTPUT. INCLUDES 6 FOOT HOSE AN (DANIELS MANUFACTURING CORPORATION) | 1 | |
| MIL195-FC | 45 DEG FLARING TOOL | 1 | |
| MIT012N8041-1D | MISCELLANEOUS TOOL ROLLS ROYCE DIAGONAL BRACE MEASURING KIT | 1 | |
| MIT012N8041-1J | MISC. TOOL ROLLS ROYCE DIAGONAL BRACE BORING TOOL | 1 | |
| MIT141T4890 | MISCELLANEOUS TOOL WRENCH ASSY FLIGHT DECK WINDOW TRACK ROLLER BEARING STUD | 2 | |
| MIT311U0050SM2 | MISC TOOL, SPRING BEAM SHIMMING, UNDERWING FITTING GAP SET, OUTBD STRUT | 1 | |
| MIT313A6800 | Miscellaneous tool-heat shield,aft fairing | 2 | |
| MIT617-1874-001 | DRIVE SPRING WINDING TOOL | 1 | |
| MIT65B01185 | MISCELLANEOUS TOOL - BEARING INSTALLATION, LANDING GEAR BEAM | 6 | |
| MIT65B01221-4 | SPLIT GUIDE - INNER CYLINDER, UPPER BEARING, NOSE LANDING GEAR | 5 | |
| MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| MIT65B02505 | SWAGING TOOL - STATION 2598 BULKHEAD TRUSS BEARING | 1 | |
| MIT65B04252-1 | KEEPER - COMPRESSION SPRING ASSEMBLY, BULK CARGO DOOR LATCH | 1 | |
| MIT65B05160 | ALIGNMENT GUIDE - BOLT, STEERING MECHANISM , BODY LANDING GEAR | 4 | |
| MIT65B09877-1 | ASSEMBLY TOOL - SPRING CARTRIDGE, BULK CARGO DOOR | 2 | |
| MIT65B13164 | ADAPTER - WRENCH, BEARING NUT, MAIN ENTRY DOOR | 6 | |
| MIT65B80521 | TORQUE WRENCH ADAPTER - TRIM AND CENTERING MECHANISM, LATERAL CONTROL | 2 | |
| MIT65B81133 | PULLER - BEARING, POWER DRIVE UNIT ASSY | 1 | |
| MIT65B82106 | SPRING INSTALLATION AND REMOVAL FIXTURE - LOAD LIMITER, AILERON CONTROL | 1 | |
| MIT65B97321 | INSTALLATION AND REMOVAL TOOL - ROLLER SWAGED BEARING | 1 | |
| MIT69B83525 | PULLER - UNIVERSAL JOINT BEARING, TRAILING EDGE FLAP ACTUATOR | 2 | |
| MIT965-4020-003 | RETAINING RING USED WITH600-0311-001 | 1 | |
| MM-16 | BEARING ROAD END | 1 | |
| MMG060-01 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-02 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-04 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-05 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-12 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-19 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-22 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-23 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-24 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-25 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-29 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-31 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-32 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MMG060-33 | ADAPTER FOR PRESSURE GREASING OF BEARINGS | 1 | |
| MNOR11.5X3 | O'RING ID11.5mm X 3mm TH. | 1 | |
| MNOR4.0X2 | OÕRING 4.0 I.D. X 2 TORE NITRILE | 1 | |
| MODEL 479100- 0- 10 KN | RING - TYPE LOAD CELL 844 - 10 KN | 1 | |
| MODEL 844/II | RING-TYPE LOAD CELL, 250 KN | 1 | |
| MODEL 844/II - 250 KN | RING - TYPE LOAD CELL 844 - 250 KN | 1 | |
| MODEL N-2000 | HAND BEARING COMPASS | 1 | |
| MODEL2003N | CLAMP ON MULTIMETER (AC/DC) - BRAKE TEMPERATURE MONITORING | 1 | |
| MODELME7-4925MK.2 | AXLE JACK (SWICKY ENGINEERING LTD) | 1 | |
| MORE0040010 | O'RING 4mmID X 1mmTORE EN EPDM | 1 | |
| MORV11.5X2.5 | O'RING VITON 11.5ID X 2.5TH. | 1 | |
| MP004093 | D=3.53 L=2000MM, - RING | 1 | |
| MP455-50 | SONDA NDT ENGINEERING 50-500HZ (PROBE) | 1 | |
| MPC7A | SEIZER. SOLDERING | 2 | |
| MPS43B-A0-B9-F3-K0 | Standard MPS43B Price Offering, Incl Wi-Fi | 1 | |
| MPS7A | SEIZER. SOLDERING | 2 | |
| MS-A3C-CLAMP-COMBO | MilSpec MS-A3C #3 Oval Head Z-Spec Grommet Flaring Tool & C-Clamp Combo Package | 1 | |
| MS-A4C-CLAMP-COMBO | MilSpec MS-A4C #4 Oval Head Z-Spec Grommet Flaring Tool & C-Clamp Combo Package | 1 | |
| MS-A5C | MilSpec MS-A5C #5 Oval Head Z-Spec Grommet Flaring Tool | 1 | |
| MS-A5C-CLAMP-COMBO | MilSpec MS-A5C #5 Oval Head Z-Spec Grommet Flaring Tool & C-Clamp Combo Package | 1 | |
| MS-F4C | MilSpec MS-F4C #4 Flush Head Z-Spec Grommet Flaring Tool | 1 | |
| MS-F5C | MilSpec MS-F5C #5 Flush Head Z-spec Grommet Flaring Tool | 1 | |
| MS-T26 | Camloc Snap Ring Tool - Made in the USA! | 2 | |
| MS14104-12 | SPHERICAL BEARING ID 3/4Ó X OD 1Ó7/16 | 1 | |
| MS16562-216 | Pin, Spring ,Tubular, Slotted | 8 | |
| MS16562-37 | SPRING PIN 1/8 DIA X 7/8 LG STEEL CADMIUM PLATED | 1 | |
| MS16562-39 | SPRING PIN 1/8 X 1"1/4 STEEL CADMIUM | 1 | |
| MS16562-45 | SPRING PIN 5/32 X 1"1/4 STEEL CADMIUM | 1 | |
| MS16562-60 | SPRING PIN DIA 7/32Ó X 2Ó LG | 1 | |
| MS16633-2018 | RETAINING RING ([3] REQUIRED FOR REMOVAL OR INSTALLATION OF COLLECTIVE SPRING ASSEMBLY. | 1 | |
| MS21151-6 | BEARING ROD END (ELEVATOR) | 1 | |
| MS28775-425 | O-RING 4.475ID X .275 THICK | 1 | |
| MS9954-08 | PLUG: MACHINE THREAD,CRES, W/ORING,DRILLED | 12 | |
| MSE-66A | PLIERS, INSTALL AND REMOVE, RETAINING RING - FAN FWD AND MID SHAFT ASSY | 3 | |
| MSL7109701 | 45DEG FLARING CONE | 1 | |
| MSL72475 | MASTER HYD TLARING TOOL SET | 1 | |
| MSL72480 | 37DEG/DOUBLE HYD FLARING KIT | 1 | |
| MST50 | NSN 6635004903142/ TESTER SPRING WITH DIAL IND | 1 | |
| MSTC-1000/2000 | OCTAGON MEASURING SCALE & TAPE CALIBRATION SYSTEM MODEL MSTC-1000/2000 | 1 | |
| MT-T-A-0263 | MANUFACTURING OF WINGS DOCK | 1 | |
| MT091-1 | ENGINE RING GEAR HOLDER | 3 | |
| MT091-1/PHP | ENGINE RING GEAR HOLDER | 1 | |
| MT528-1 | C184 BEARING REMOVAL AND INSTALLATION TOOLS (FOR USE WITH HYDRAULIC PRESS) | 2 | |
| MT556-11 | KIT - TAIL ROTOR ELASTOMERIC BEARING REMOVAL AND INSTALLATION TOOLS | 1 | |
| MT556-11/PHP | KIT - TAIL ROTOR ELASTOMERIC BEARING REMOVAL AND INSTALLATION TOOLS | 1 | |
| MT556-17 | KIT - TAIL ROTOR ELASTOMERIC BEARING REMOVAL AND INSTALLATION TOOLS | 1 | |
| MT927-005 | WRENCH, ELEC SPHERE BEARING ADJUST | 1 | |
| MTD46 | GAS SOLDERING IRON | 1 | |
| MTF9003-95FX | NDT ENGINEERING CORP - PROBE | 1 | |
| MTSATH1216R | ADJUSTABLE SPRING TOOL HOLDER | 1 | |
| MULTITIPC25 | SOLDERING PEN | 1 | |
| MW498-05 | Bowers MW498-05 Comparator Stand Thread Column Height 280mm Measuring Table Area 98 x 98mm | 1 | |
| MW5012P | Moore & Wright Spring Divider 300mm/ 12" Powder Coated | 1 | |
| MW504P | Moore & Wright Spring Divider 100mm/ 4" Powder Coated | 1 | |
| MW506P | Moore & Wright Spring Divider 150mm/ 6" Powder Coated | 1 | |
| MW5112P | Moore & Wright Spring Inside Caliper 300mm/12" P/Coated | 1 | |
| MW514P | Moore & Wright Spring Inside Caliper 100mm/4" P/Coated | 1 | |
| MW516P | Moore & Wright Spring Inside Caliper 150mm/6" P/Coated | 1 | |
| MW5212P | Moore & Wright Spring Outside Caliper 300mm/12" P/Coat | 1 | |
| MW524P | Moore & Wright Spring Outside Caliper 100mm/4" P/Coated | 1 | |
| MW526P | Moore & Wright Spring Outside Caliper 150mm/6" P/Coated | 1 | |
| MYA-4.0 | SINGLE PASS DEBURRING TOOLS,MAKE: COGSDRILL | 1 | |
| N-2053-07-S-E | PLUG, O-RING HEX HEAD | 1 | |
| N-2053-07-S-E-1 | PLUG, O-RING HEX HEAD | 1 | |
| N414700 | AT120S/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEP 20-MM | 1 | |
| N4148800 | AT120D/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. 2,275.00 2,275.00 - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 2 - 200MM - 1 YEAR WARRANTY | 2 | |
| N4148900 | AT120D/FF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: DIRECT - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 120° - DEPTH OF FIELD: 17 - MM - 1 YEAR WARRANTY | 2 | |
| N4149000 | AT100S/NF-IV94N IPLEX NX TIP ADAPTER - INCLUDE O-RING. - DIRECTION OF VIEW: SIDE - SCOPE DIAMETER: 4 MM - FIELD OF VIEW: 100° - DEPTH OF FIELD: 2 - 15MM - 1 YEAR WARRANTY | 1 | |
| N4149300 | AT80D/FF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING | 1 | |
| N4149600 | AT120S/NF-IV96N IPLEX NX TIP ADAPTER INCLUDE O-RING FIELD DEPTH 4-150MM | 2 | |
| NAS1211A10 | D-RING | 1 | |
| NAS1334A6C1.75D | BALL LOCK PIN 1/4 X 1"3/4 RING HANDLE STAINLESS | 1 | |
| NAS1611-012 | PACKING-PREFORMED 'O'RING | 19 | |
| NAS1611-028 | O-RING (UNLIMITED) | 11 | |
| NAS1612-6A | PACKING, PREFORMED, ORING | 5 | |
| NAS5063 | EXTR SET RUDDER BEARINGS | 1 | |
| NATO 14V164SK | RACCORD ORIENTABLE CASTERING UNION | 1 | |
| NDT3052 | NEC 4028-2; 0,50 INCH INNER DIAMETER, 1.0 INCH OUTER DIAMETER, 0.84 INCH (21MM) HEIGHT; NDT ENGINEERING CORP | 2 | |
| NDT3276 | REFERENCE STANDARD BEARING | 2 | |
| NDT6050 | OUTBOARD WING - STRINGERS ALONG THE LOWER SKIN OF THE WING (EXTERNAL) | 3 | |
| NDT6051 | OUTBOARD WING - STRINGERS ALONG THE LOWER SKIN OF THE WING (EXTERNAL) | 3 | |
| NDT6076 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6077 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6078 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6079 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6109 | STRINGERS 6, 10 AND 15 AT THE LOWER WING SKIN SPLICE (EXTERNAL) | 2 | |
| NDT622 | STRINGERS 6, 10 AND 15 AT THE LOWER WING SKIN SPLICE (EXTERNAL) | 4 | |
| NDTE04-0101-04 | SCRATCHVIEW MEASURING DEVICE | 1 | |
| NEC 4028-2 | RING PROBE. NEC 4028-2; 0.50 INCH INNER DIAMETER, 1.0 INCH OUTER DIAMETER, 0.84 INCH (21 MM) HEIGHT; NDT ENGINEERING CORP | 1 | |
| NEC- 1084 | 0.19 INCH DIAMETER OLYMPUS(NDT ENGINEERING) | 1 | |
| NEC-1062 | NDT ENGINEERING CORP. HIGH FREQUENCY PROBE UNSHIELDED 25-500KHZ DIFFERENTIAL,TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| NEC-1062G | NDT ENGINEERING CORP. NEC-1062 PROBE GUIDE. Includes Certificate of Conformance. | 1 | |
| NEC-1087 | 0.25 INCH (6.4 MM) DIAMETER; NDT ENGINEERING | 1 | |
| NEC-3036 | CURRENT PROBE (NDT ENGINEERING CORP.) | 1 | |
| NEC-4040 | EDDY CURRENT RING PROBE | 1 | |
| NEC-4050-1 | Low frequency reflection ring probe; 500Hz-2KHz Fisher/Triax connector. Not to exceed .65" | 1 | |
| NEC-6153 | AIR TRACTOR: NDT ENGENEERING REFERENCE STANDARD | 1 | |
| NFE27489 | SPRING PIN DIA. 2,5X20 | 1 | |
| NG20-050 | REM.AND INST.BEARING SET | 1 | |
| NG3000 | HANDLE, DEBURRING TOOL | 1 | |
| NITROBI-CREATOR-USER-AL | NITROBI-CREATOR-USER-AL;Annual offering for NITRO Creator - Sold Per User | 1 | |
| NITROBI-HOSTED-VIEWER-AL | NITROBI-HOSTED-VIEWER-AL;Annual offering for HOSTED NITRO Viewer - Sold Per User | 1 | |
| NITROBI-VIEWER-AL | NITROBI-VIEWER-AL;Annual offering for NITRO Viewer - Sold Per User | 1 | |
| NKI10/20 | NEEDLE BEARING | 1 | |
| NKI22/20 | NEEDLE BEARING | 1 | |
| NLG MOORING PAD | NLG MOORING PAD | 1 | |
| NLM0449200-48 | SPRING 20.5 X 8 X 48 STEEL BLACKENED | 1 | |
| NOGA-DEBURRERS | DEBURRING TOOL | 1 | |
| NOV-22 | LOCK-RING INSTALLATION DRIFT | 1 | |
| NOXHDIP1115 | IMPACT DRIVER SET, SPRING DRV | 1 | |
| NOXMMP-3 | SPRING TOOLS POP DISPLAY | 1 | |
| NRE-FIT | NRE-FIT;Non-Refundable Engineering Charge-FIT Business Unit | 1 | |
| NRK-3S/400SS | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 400 Stainless Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for | 1 | |
| NRK-3S/HX | CUSTOM NAVY EDDY CURRENT BLOCK. Material: Hastelloy X, 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all notc | 1 | |
| NRK-3ST | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 4340 Cres Steel. 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all | 1 | |
| NRK-3T | CUSTOM NAVY EDDY CURRENT BLOCK. Material: 6AL-4V Titanium 3 Plate assembly measuring 4" x 7" x .875", Contains 20 fastener holes with diameters ranging from .156" – .750"., 71 EDM notches in various locations (notch depth & lengths vary), Widths for all n | 1 | |
| NS09IND01028 | OTC 6057 SPRING COMPRESSOR DSC | 1 | |
| NS09IND01040 | OTC 6770 DUMMY BEARING KIT | 1 | |
| NS09IND01042 | OTC 6777 DUMMY BEARING KIT | 1 | |
| NTS9162 | EXTRACTING AND ASSEMBLY BEARING | 1 | |
| NTS9163 | EXTRACTING AND ASSEMBLY BEARING | 1 | |
| OBS-220 | OVER-WING COVER, extends to cover wing root fairings | 1 | |
| OEX711B | RING & OPEN END SPAN | 2 | |
| OHME65B00110-53 | BOOTSTRAP CLAMP - FAIRING, TRAILING EDGE FLAP TRACK | 5 | |
| OHME65B01519-1 | OVERHEAD EQUIPMENT SLING - ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 3 | |
| ORT2-170-173-XNGL | Bojo Tools ORT2-170-173-XNGL O-Ring Pick Tool Large Radius | 1 | |
| ORT2-171-172-XNGL | Bojo Tools ORT2-171-172-XNGL O-Ring Pick Tool Angled | 1 | |
| ORT2-174-175-XNGL | Bojo Tools ORT2-174-175-XNGL O-Ring Pick Tool Small Radius | 1 | |
| OSD752 | SOCKETS, RMV/INSTL -FLAP AND FLAP FAIRING | 1 | |
| OTC4839 | OTC 4839 RedSilver Adjustable Piston Ring Expander Pliers | 1 | |
| OTC5079 | ADAPTER ANALYZER PWR STEERING | 1 | |
| OTCMD9987772 | MD9987772A VALVE SPRING COMP | 1 | |
| OU-50482 | Spring box restraining device | 1 | |
| OU-50654 | Spring box restraining device | 1 | |
| Olympus Chain Scanner | Olympus Chain Scanner - TOFD, phased array, or pulse-echo, Pipe range outside diameters: 45mm to 965mm, Spring-loaded probe holders ensure good probe contact | 1 | |
| Olympus Phased Array Weld Inspection Kit | Olympus Phased Array Weld Inspection Kit - he kit contains the following items:, qty 2 A12 5L64 PA probes with 5m cable., qty 2 SA12 N55S Standard Wedge with Removable IHC Ring, qty 1 ‘Y’ Splitter 64/64, for Omniscan MX2, 5m split conduit, Irrigation Tubi | 1 | |
| OÕRING10X3.5 | OÕRING DIA.10 X 3.5 | 1 | |
| OÕRING42IDX1.9N | OÕRING 42mm I.D. X 1.9mm ƒP BUNA N | 1 | |
| P -295 | RETAINING RING MODEL G 30 CHERRY RIVET | 1 | |
| P0038S | Ionic Systems Angle Crank Adaptor With Spring | 2 | |
| P21160 | BEARING (STANDARD) | 1 | |
| P21160P20 | BEARING (SECOND OVERSIZE) | 1 | |
| P21160P30 | BEARING (THIRD OVERSIZE) | 1 | |
| P2D-L006 | Cable, Phasec 2D/3D to Foerster single coil probe (Lemo 00), Straight through wiring | 1 | |
| P2KC | SOLDERING SELF-IGNITING BUTANE KIT IRON WELLER PORTASOL | 1 | |
| P351HU27E | RING DISC PLATE | 1 | |
| P3A1820 | BEARING ROD END | 1 | |
| P46 | LEGRAND WIRING TOOL | 1 | |
| P68B-230 | OVER-WING COVER, extends to cover wing root fairings | 1 | |
| P68C-230 | OVER-WING COVER, extends to cover wing root fairings | 1 | |
| P753300-24 | NLG DRAG BRACE BEARING TOOL | 1 | |
| PAS-TW60-WAND | PowerAll Systems PAS-TW60-WAND Pratt & Whitney PT-6 Compressor Wash Ring | 2 | |
| PBN15 | NONMARRING PRY TOOL 90 DEGREE | 1 | |
| PCE-RCM10 | DUST PARTICLE MEASURING DEVICE | 1 | |
| PE7007 | CIRCUIT BREAKER LOCKOUT RING AND TAG | 1 | |
| PEN45-5 | SONDA NDT ENGINEERING 50-500HZ (PROBE) | 1 | |
| PER27452 | TOOL FOR COUNTERBORING SQUARE BRACKETS AND PLATE | 1 | |
| PF09-003-1 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| PF09-007-1 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| PF09-009-1 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| PG-UL 60 | NORTEC TESTING AND MEASURING INSTRUMENT PG-UL 60 (WITH ACCESSORIES) (2 PACK) | 1 | |
| PHG301DR5 | BEARING DRIVER AIR HAMMER | 1 | |
| PHG304DR5 | BEARING DRIVER AIR HAMMER | 1 | |
| PLF617-4431-001 | BEARING PRELOAD FIXTURE | 1 | |
| PME65B00110-53 | HANDLING DOLLY - FAIRING, TRAILING EDGE FLAP TRACK | 5 | |
| PMP-10111 | TIE-DOWN RING (1000 LBS CAP) | 1 | |
| PMXPPC007A | MACHINE DEBURRING BIT ASSY. | 1 | |
| PMXTOM450PRO | WHL BEARING PULLER FORD SUBARU | 1 | |
| PN 293176-1 | spring holder | 1 | |
| PNPGT60 | SOLDERING GUN | 1 | |
| PORTAPRO/KIT/N | ERSA SOLDERING-IRON | 1 | |
| POWPPPS50W | RECHARGABLE SOLDERING IRON KIT | 1 | |
| POWPPS50W | RECHARGEABLE SOLDERING IRON KIT | 1 | |
| POWPSK | SOLDERING KIT | 1 | |
| PPFC-1H | ASSEMBLY - HEAD/CYLINDER, CRIMPING TOOL. (DANIELS MANUFACTURING CORPORATION) | 4 | |
| PRC87 | T-HANDLE CHANGEABLE-TIP RETAINING RING TOOLS KIT WITH INTERNAL AND EXTERNAL BITS TOOL , MANUFACTURER A&E HAND | 1 | |
| PRE69-35342 | PROTECTIVE OUTBOARD WING OPENING ACCESS RING | 1 | |
| PRE69-35343 | PROTECTIVE INBOARD WING OPENING ACCESS RING | 1 | |
| PRESSOL 12935 | SYRINGE CFM56 CSD SPLINE CAVITY SERVICE | 1 | |
| PRO-25LK | PORTABLE SOLDERING KIT (IRODA) | 1 | |
| PROLT-GTE20-1314 | AIRCAP & RING (DEVILBISS) | 1 | |
| PS 200A | DISOLDERING PUMP | 1 | |
| PS10352-5 | BEARING PRESS DRIVER | 1 | |
| PS4-039 | BEARING DOUBLE | 1 | |
| PS4-070 | LOCK RING, STANDARD LARGE | 1 | |
| PSDF4600-51 | BEARING SHIELD | 1 | |
| PSI100K | SUPER PRO SELF IGNITING CORDLESS SOLDERING IRON (WELLER) | 1 | |
| PSLDGN-01 | Portable soldering gun | 1 | |
| PSM-5 | WEDGE - SHERWIN PSM-5 PENETRANT SYSTEM MONITORING PANEL | 7 | |
| PSO4-071 | LG LOCK RING FINE 5IN AND 6IN | 1 | |
| PT109 | DESOLDERING TOOL | 1 | |
| PT338-12R | RINGED ANVIL ASSY | 1 | |
| PT338-17 | DETENT SPRING | 1 | |
| PT350-12R | RINGED ANVIL ASSY 1/2" | 1 | |
| PT850XL12R | REPAIR XL ANVIL ASSY. RINGED | 1 | |
| PTGR115 | MINI LONG RA DIE GRINGER | 1 | |
| PTGR115BK | MINI LONG RA DIE GRINGER BLK | 1 | |
| PTGR115G | MINI LONG RA DIE GRINGER GRN | 1 | |
| PTGR115GM | MINI LONG RA DIE GRINGER GM | 1 | |
| PTGR115HV | MINI LONG RA DIE GRINGER HVZ | 1 | |
| PTS500-331 | SPRING STAND | 1 | |
| PU-81 | POWER UNIT FOR SOLDERING STATION | 1 | |
| PU120T | POWER UNIT FOR SOLDERING STATION | 1 | |
| PU81 | SOLDERING IRON STAND | 1 | |
| PWA 103115 | HEATER, ELECTRICAL - HPC, NO. 2 BEARING AND SUPPORT ASSEMBLY | 1 | |
| PWA 105310 | CRADLE, HANDLING − ENGINE ASSEMBLY, FUEL PUMP AND FUEL METERING UNIT (REPLACES | 1 | |
| PWA 115061 | FAN BLADE FAIRING PIN PULLER | 2 | |
| PWA 115071 | FAIRING DRIFT PIN | 1 | |
| PWA 16033 | HOLDER NO.5 BEARING HOUSING | 1 | |
| PWA 16067 | DRIFT 5 BEARING INNER RACE | 1 | |
| PWA 16068 | DRIFT 5 BEARING INNER RACE | 1 | |
| PWA 16249 | HOLDER FRONT COMPRESS0R ROTOR BEARING 1 | 1 | |
| PWA 16469 | GAGE NO.6 BEARING SUPPORT RODS | 1 | |
| PWA 25221 | BASE - AGB IDLER GEAR BEARING | 2 | |
| PWA 25268 | SPRING LOADER | 2 | |
| PWA 25626 | ADAPTER RING TOOL | 1 | |
| PWA 25923 | SPRING LOADER | 2 | |
| PWA 27251 | ADAPTER MAIN GEARBOX BEARING OIL NOZZLES | 2 | |
| PWA 27562 | ADAPTING- RING | 2 | |
| PWA 28024 | ADAPTER-RING | 1 | |
| PWA 6601C | WRENCH ACCESSORY DRIVE AND NO.4 BEARING | 1 | |
| PWA 80516 | RING, ADAPTER | 1 | |
| PWA 80517 | RING, ADAPTER | 1 | |
| PWA 80521 | RING, LIFT AND TURN | 1 | |
| PWA 81751 | PULLER, NO. 4 BEARING SPACER, HAND | 1 | |
| PWA 84506 | HOLDER, COVER NO. 5 BEARING | 1 | |
| PWA 85196 | RING, RETAINING - HPC ROTOR ASSEMBLY; SIXTH STAGE BLADE | 1 | |
| PWA 85197 | RING, RETAINING - HPC ROTOR ASSEMBLY; SEVENTH STAGE BLADE | 1 | |
| PWA 85198 | RING, RETAINING - HPC ROTOR ASSEMBLY; EIGHT STAGE BLADE | 1 | |
| PWA 85344 | RING, ADAPTER | 1 | |
| PWA 85585 | RING, GUIDE | 1 | |
| PWA 8692 | DRIFT 4.5 BEARING INNER | 1 | |
| PWA 8693 | DRIFT 4.5 BEARING INNER | 1 | |
| PWA101183 | RIVETER HAND FLARING LPC | 1 | |
| PWA101960 | BASE SUPPORTING INTERMEDIATE CASE #2 BEARING HOUSE ASSY | 1 | |
| PWA102275 | PIN,DRIFT-FAN BLADE FAIRING | 1 | |
| PWA102419 | DRIFT - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE, STARTER (FRONT) | 1 | |
| PWA102715 | BASE DISASSAMBLY ACCESSORY DRIVE GEAR AND ROLLER BEARING | 1 | |
| PWA103718 | PROBE ASSEMBLY & VIDEO MONITORING | 2 | |
| PWA105310 | CRADLE - HANDLING, FUEL PUMP/FUEL METERING UNIT | 1 | |
| PWA105707 | RING,LIFT AND TURN-ENGINE ASSEMBLY FAN CASE UNIT,FRONT | 1 | |
| PWA105714 | PIN,ALIGNING-BLADE FAIRINGING | 1 | |
| PWA106220 | ADAPTER, VACUUM CHECK - NO. 5 BEARING COMPARTMENT | 1 | |
| PWA107956 | DRIFT, HANDLE-GEARBOX, FACE SEAL ROTATING RING, INSTALL | 1 | |
| PWA111199 | PULLER, SLIDE - FAN EXIT FAIRING (SPLITTER) | 3 | |
| PWA111301 | BEARING ROLLER AND CAGE | 1 | |
| PWA115061 | FAN BLADE FAIRING PIN PULLER | 2 | |
| PWA12015 | DRIFT SEAL SLINGER AND BEARING INNER RACE | 1 | |
| PWA12126 | BASE-DISASSEMBLY ACCESS DRIVE GEAR,ROLLER BEARING | 2 | |
| PWA12768 | BEARING 4 1/2 DLIFT FOR SEAL SPACER | 1 | |
| PWA211404 | ENG ASSY, A FLANGE RING TO LIFT ENIGNE WITH OR WITHOUT FWD MOUNT YUL-YYZ-YVR | 2 | |
| PWA211777 | "TESTER, GAGE - MATING RING FOR HYDRAULIC PUMPMAIN | 3 | |
| PWA211814 | CHART, PHOTOGRAPH - USED TO TAKE PICTURE DURING FAN BLADE INSPECTION | 1 | |
| PWA22756 | SPREADER-RING PLIER_[PWA22756] | 1 | |
| PWA24524 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 10 | |
| PWA25187 | DRIFT - AGB SPURGEAR BEARING_[PWA25187] | 2 | |
| PWA25221 | BASE - AGB IDLER GEAR BEARING_[PWA25221] | 2 | |
| PWA25328 | DRIFT - MGB CSD G/SFT ROLLER BEARING_[PWA25328] | 2 | |
| PWA25365 | DRIFT - IMC G/B DR G/SHAFT BEARING_[PWA25365] | 2 | |
| PWA25382 | RING - ENG ASSY,TRUNNION IMC DOWN_[PWA25382] | 2 | |
| PWA25614 | RING, GRADUATED - BRG, #1 CONTACT ANGLE_[PWA25614] | 1 | |
| PWA25789 | RING - HPC ROTOR ASSY BLADE RET_[PWA25789] | 1 | |
| PWA25790 | RING - HPC R/BLADE RETNG EVEN NO.STAGES_[PWA25790] | 1 | |
| PWA25919 | GUIDE CSD ALTERNATOR DRIVE SHAFT RETAINING RING QEC | 1 | |
| PWA26436 | FIXTURE - MOLD, AIRSEALING RING | 2 | |
| PWA27392 | DRIFT - FAN ROTOR BAL ARBOR BEARING_[PWA27392] | 1 | |
| PWA27393 | DRIFT - FAN ROTOR BAL ARBOR BEARING_[PWA27393] | 1 | |
| PWA27397 | DRIFT - LPC & HPT BAL ARBOR BEARING_[PWA27397] | 1 | |
| PWA27562 | RING, ADAPTER - #3 BRG HOUSING FIXTURE_[PWA27562] | 2 | |
| PWA27641 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 5 | |
| PWA27654 | ADAPTER RING | 1 | |
| PWA27687 | RING,LOCATING - 7TH STATOR BUILD STD_[PWA27687] | 2 | |
| PWA27688 | RING,LOCATING - 5TH STG COMP DUCT_[PWA27688] | 1 | |
| PWA27734 | RING - REAR COMP DR TURB CASE, FRONT_[PWA27734] | 1 | |
| PWA27735 | RING, ADAPTER - REAR COMP DR TEC REAR_[PWA27735] | 1 | |
| PWA27738 | SPACER - RING, HPC DR TURB R & STATOR_[PWA27738] | 2 | |
| PWA27750 | CLAMP, SPRING - 1ST STG TURB BLADE RET_[PWA27750] | 1 | |
| PWA27868 | HOLDER, BAL BEARING - TURBINE FRONT_[PWA27868] | 2 | |
| PWA28080 | GUIDE - MGB N2 TACH DR BALL BRG RET RING_[PWA28080] | 1 | |
| PWA28157 | RING - 1ST TURB DISK & BLADE SUPPORT_[PWA28157] | 1 | |
| PWA28158 | CLAMP, SECURING - 1ST STG TURB BLADE_[PWA28158] | 2 | |
| PWA28462 | GAGE,POSITION-GEARBOX CSD TRANSFER TUBE.RETAINING RING | 3 | |
| PWA28937 | PIN RING 3.0 BLEED CON FEEDBACK LEVER | 3 | |
| PWA29304 | BELL MOUTH INLET & ADAPTER RING | 1 | |
| PWA29881 | ADAPTER RING | 2 | |
| PWA33285 | Guide Ring | 1 | |
| PWA33286 | Guide Ring | 1 | |
| PWA4098 | WRENCH NUMBER ONE BEARING RETAINING NUT HYDRAULIC | 1 | |
| PWA45336 | #4 BEARING DRAIN TUBE PULLER | 1 | |
| PWA45515 | Bearing ( Replaced by PWA 105567) | 1 | |
| PWA45531 | PUSHER, HYDRAULIC - #1 BEARING INNER RACE | 1 | |
| PWA45531 REV NC | PUSHER, HYDRAULIC - #1 BEARING INNER RACE | 1 | |
| PWA45849 | ANTI-ROTATION ADAPTER NO.2 BEARING | 3 | |
| PWA46016 | Guide Ring | 2 | |
| PWA46270 | Puller, Hydraulic; #4 Bearing | 2 | |
| PWA46296 | PUSHER, HYDRAULIC - #1 BEARING INNER RACE | 1 | |
| PWA46296 REV NC | PUSHER, HYDRAULIC - #1 BEARING INNER RACE | 1 | |
| PWA52582 | INSERTER AND REMOVER,BEARING AND | 1 | |
| PWA52922 | FORWARD RING MOLD FIXTURE | 1 | |
| PWA52923 | REAR RING MOLD FIXTURE | 1 | |
| PWA55925 | REAR RING MOLD FIXTURE | 1 | |
| PWA55926 | FORWARD RING MOLD FIXTURE | 1 | |
| PWA75901 | RING, GRADUATED - NO.2 BRG CONTACT ANGLE_[PWA75901] | 1 | |
| PWA75913 | FIXTURE - HOLDG NO4 BEARING SEAL SPACER_REPLACESPWA27491BYT.B87-067_[PWA75913] | 1 | |
| PWA76104 | BASE SUPPORTING INTERMEDIATE CASE #2 BEARING FRONT INNER RACE | 1 | |
| PWA76154 | BASE SUPPORTING INTERMEDIATE CASE #2 BEARING FRONT INNER RACE | 5 | |
| PWA76254 | BASE SUPPORTING INTERMEDIATE CASE #2 BEARING HOUSE ASSY | 1 | |
| PWA76283 | RING-GRINDER | 2 | |
| PWA77186 | GUIDE RING | 1 | |
| PWA78026 | PULLER MECHANICAL DIFUSER CASE #3 BEARING FRONT COOLING AIR DUCT | 1 | |
| PWA78187 | DRIFT INSTALL ENG. ASSY #3 BEARING INNER | 1 | |
| PWA78196 | DRIFT INSTALL ENG. ASSY #3 BEARING INNER | 1 | |
| PWA80156 | ADAPTER PULLER GEARBOX SEAL ROTATING RING REMOVAL HYD PUMPS FP/FB | 1 | |
| PWA80157 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL IDGS | 1 | |
| PWA80158 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL STARTER | 1 | |
| PWA80222 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING DEOILER | 1 | |
| PWA80567 | ADAPTER, RING | 1 | |
| PWA80811-8 | FIXTURE, ASSEMBLY-NO.1 BEARING SHOULDER STUDS | 1 | |
| PWA80865 | FIXTURE, LEFT GEARING DRIVE | 1 | |
| PWA80866 | FIXTURE, RIGHT GEARING DRIVE | 1 | |
| PWA81257 | DRIFT, NO. 5 BEARING PLUG | 1 | |
| PWA81751 | PULLER, NO. 4 BEARING SPACER, HAND | 1 | |
| PWA81821 | BRACKET SUPPORT NUMBER 1 & 2 BEARING MANIFOLD | 1 | |
| PWA8185 | BASE, DISASSY - BEARING & IMPELLER_[PWA8185] | 2 | |
| PWA85007 | BUILD AND STORAGE HPT, RING | 1 | |
| PWA85038 | ADAPTER RING | 1 | |
| PWA85058 | DRIFT ASSY LPC # 1 BEARING | 1 | |
| PWA85059 | DRIFT ASSY ENG ASSY LPC # 1 BEARING | 1 | |
| PWA85202 | BELL MOUTH INLET & ADAPTER RING | 1 | |
| PWA85267 | BASE - ASSEMBLY, GEARBOX; ROLLER BEARING INNER RACE; OIL AND SCAVENGE PUMP | 1 | |
| PWA85274 | PLATE - DISASSEMBLY, GEARBOX ROLLER BEARING INNER RACE, PMA | 1 | |
| PWA85279 | DRIFT - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE, DEOILER (FRONT) | 1 | |
| PWA85348 | DRIFT-ROLLER BEARING INNER RACE, PMA | 1 | |
| PWA85375 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85378 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85379 | FIXTURE HANDLING ENG. ASSY HPC 2 BEARING FRONT CASE | 1 | |
| PWA85384 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85390 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85391 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85403 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85406 | FIXTURE HANDLING ENG. ASSY.HPC # 2 BEARING FRONT CASE | 1 | |
| PWA85443 | RING GUIDE ENGINE | 1 | |
| PWA85444 | RING GUIDE ENGINE | 1 | |
| PWA85453 | DRIFT INSTALL - NO. 4 BEARING INNER RACE | 2 | |
| PWA85473 | RING ADAPTER | 1 | |
| PWA85504 | PULLER KNOCKER DIFFUSER CASE 15TH STAGE AIR SEALING RING | 1 | |
| PWA85600 | MACHINING STATOR LPC 1.6,2 AND 3RD STAGE INNER AIRSEAL RING | 1 | |
| PWA85698 | FIXTURE FLARING DUCT | 1 | |
| PWA85843 | ADAPTER - TEST, NUMBER 3 BEARING COMPARTMENT VACUUM | 1 | |
| PWA85989 | FIXTURE-HANDLING FUEL PUMP FUEL METERING UNIT | 4 | |
| PWA86087 | ADAPTER INSPECTION #1 BEARING | 1 | |
| PWA86345 | PLATE - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE (VARIOUS) | 1 | |
| PWA88021 | CASCADE RING FITTING ASSEMBLY TOOL | 1 | |
| PWA88125 | ADAPTER - N4 BEARING COMPARTMENT SCAVENGE TUBE | 1 | |
| PWA88522 | KNOCKER PULLER-LPC, PIN, FAIRING, BLADE | 1 | |
| PWA88683 | BASE - ASSEMBLY, GEARBOX; ROLLER BEARING INNER RACE; OIL AND SCAVENGE PUMP | 1 | |
| PWA89501 | DIFFUSER CASE; NO. 2 BEARING OUTER RACE NUT RIVET INTERMEDIATE CASE, NO. 3 BEARING OUTER RACE NUT RIVET | 1 | |
| PWC 30176-J | DUMMY OUTER,NO.3 BEARING | 1 | |
| PWC 31771 | FLARING TOOL, TUBE, HAND | 5 | |
| PWC 37560 | MEASURING ADAPTER | 4 | |
| PWC 37562 | MEASURING ADAPTER | 4 | |
| PWC 54746 | GUIDE FUEL NOZZLE O-RING | 7 | |
| PWC30128-15 | RING, ADAPTING | 9 | |
| PWC30176 | DUMMY OUTER, NO. 3 BEARING RACE SET. | 4 | |
| PWC30235 | DRIFT, BEARING | 3 | |
| PWC30269 | ring - Pratt & Whitney Canada | 8 | |
| PWC30304-09 | SET, HP TURBINE DISKPOST-SB7306 BELLCRANK AND NO.4 BEARING HOUSING COVER BOLT RIVETS | 2 | |
| PWC30361 | DRIFT, BEARING | 1 | |
| PWC30423 | No. 2 Bearing Air Seal Installation Drift | 4 | |
| PWC30464 | Flaring Tool - Pratt & Whitney Canada | 2 | |
| PWC30506 | TEST RING AND FIXTURE | 6 | |
| PWC30515 | DRIFT, NOZZLE, BEARING | 2 | |
| PWC30635 | DRIFT, BEARING | 1 | |
| PWC30640 | DRIFT, BEARING | 1 | |
| PWC30661 | DRIFT, BEARING | 1 | |
| PWC30713 | ring - Pratt & Whitney Canada | 1 | |
| PWC30840 | ring - Pratt & Whitney Canada | 3 | |
| PWC30842 | DRIFT, BEARING | 1 | |
| PWC30875 | Pusher Bearing - Pratt & Whitney Canada | 3 | |
| PWC31071 | RIVETER, SHROUD SEGMENTS RETAINING RING | 3 | |
| PWC31079 | PULLER, HPT SHROUD SEGMENTS RETAINING RING | 2 | |
| PWC31275 | DRIFT, NO. 4 BEARING, CARBON SEAL | 1 | |
| PWC31280-202 | measuring adapter | 3 | |
| PWC31563 | DRIFT , NO.4 BEARING CARBON SEAL | 1 | |
| PWC31642 | HOLDER, NO. 4 BEARING HOUSING COVER T-HEADED BOLT | 1 | |
| PWC31650 | RING, HP TURBINE DISK | 1 | |
| PWC31687 | RIVETER, HPT DISK /POST-SB7306 BELLCRANK, NO.4 BEARING HSG. COVER BOLTS | 1 | |
| PWC31771-100 | FLARING TOOL, TUBE, HAND | 8 | |
| PWC32014 | Puller Bearing - Pratt & Whitney Canada | 3 | |
| PWC32081 | ring - Pratt & Whitney Canada | 4 | |
| PWC32083 | RING, REDUCTION GEARBOX | 1 | |
| PWC32109 | DRIFT, BEARING (C) | 4 | |
| PWC32175 | Ring - Pratt & Whitney Canada | 3 | |
| PWC32283 | ROD, BEARING | 1 | |
| PWC32506 | CYLINDER, HYDRAULIC, BEARING | 2 | |
| PWC32831 | DRIFT, BEARING | 1 | |
| PWC32864 | Fix. Holding Bearing | 1 | |
| PWC34537 | T-HANDLE PULLER, NO.1 BEARING INNER RACE | 5 | |
| PWC34598 | FIXTURE HOLD VANE RING | 3 | |
| PWC34626 | Drift Bearing - Pratt & Whitney Canada | 3 | |
| PWC34626 | Drift Bearing | 3 | |
| PWC34752 | MOUNT RING,POWER SECTION,ENGINE STAND | 7 | |
| PWC37029 | FIXTURE, LOADING, OIL PUMP DRIVE SHAFT BEARING | 1 | |
| PWC37030 | measuring Adapter | 1 | |
| PWC37031 | measuring adapter | 1 | |
| PWC37051 | measuring adapter | 1 | |
| PWC37099 | Base, Seal No. 6 and 7 Bearing Housing | 1 | |
| PWC37127 | measuring adapter | 1 | |
| PWC37244 | Drift Bearing | 1 | |
| PWC37261 | slave bearing race - Pratt & Whitney Canada | 1 | |
| PWC37390 | PULLER, BEARING, ACC DRIVE | 2 | |
| PWC37487 | Gage, LPT Bladed Disk Measuring | 3 | |
| PWC37502 | measuring Adapter | 1 | |
| PWC37503 | measuring Adapter | 1 | |
| PWC37504 | measuring Adapter | 1 | |
| PWC37560 | measuring Adapter | 4 | |
| PWC37562 | measuring adapter | 4 | |
| PWC37563 | measuring adapter | 3 | |
| PWC37726 | FIXTURE, LOADING, OIL PUMP TRANSFER SHAFT BEARING | 1 | |
| PWC37737 | LOADING FIXTURE, HP IMPELLER CLEARANCE, NO. 4 BEARING | 1 | |
| PWC37796 | ADAPTER, NO. 3 BEARING RUNNER PULSE PICK-UP | 1 | |
| PWC37824 | ADAPTER, UPPER ANGLE DRIVE BEARING GAGING | 1 | |
| PWC37828 | measuring adapter | 1 | |
| PWC37845 | DRIFT VANE RING | 4 | |
| PWC37908 | #6 BEARING INNER RACE REMOVAL PAD | 3 | |
| PWC37911 | centering fixture - Pratt & Whitney Canada | 3 | |
| PWC37913 | centering locator - Pratt & Whitney Canada | 3 | |
| PWC37914 | centering fixture - Pratt & Whitney Canada | 4 | |
| PWC37942 | PAD, NO. 5 BEARING | 1 | |
| PWC37987 | PAD, NO. 9 BEARING I | 1 | |
| PWC38088 | Fixture, Lifting & Loading LP Rotor & No. 3 Bearing Housing | 1 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC38231 | LOCKING RING,ADAPTER,JACK SCREWS | 3 | |
| PWC38245 | PAD, NO. 14 BEARING | 1 | |
| PWC38291 | centering gauge - Pratt & Whitney Canada | 4 | |
| PWC38308 | #6 BEARING INNER RACE REMOVAL PAD | 2 | |
| PWC38424 | ADAPTER BEARING | 1 | |
| PWC38487 | GAGE, LPT BLADE DISK MEASURING | 5 | |
| PWC38557 | Adapter, No 11 Bearing Retaining Nut Anti-rotation | 1 | |
| PWC38574 | GUIDE, NO. 4 BEARING OUTER RACE | 1 | |
| PWC40183 | ADAPTER RING | 1 | |
| PWC40193 | Adapter ring | 1 | |
| PWC40292 | ADAPTER BEARING SEAL | 1 | |
| PWC40672 | Support ring - Pratt & Whitney Canada | 3 | |
| PWC40988 | ADAPTER RING | 1 | |
| PWC42040 | Drift No. 1 bearing carbon seal | 2 | |
| PWC42049 | Drift No. 1 bearing carbon seal | 3 | |
| PWC42079 | Holding Fixture No. 3 bearing housing | 1 | |
| PWC42102 | Drift No. 4 bearing | 1 | |
| PWC42108 | Drift No. 3 bearing | 1 | |
| PWC42117 | Drift No. 8 inner race bearing | 1 | |
| PWC42130 | Drift No. 9 inner race bearing | 1 | |
| PWC42134 | Drift No. 10 inner race bearing | 1 | |
| PWC43064 | vane ring adapter (grinding) | 2 | |
| PWC43522 | FIXTURE LOADING BEARING | 1 | |
| PWC44015 | bearing holder | 1 | |
| PWC45040 | GAGE LOADING BALL BEARING | 1 | |
| PWC45093 | PAD NO. 3 INNER RACE BEARING | 1 | |
| PWC46620 | GUIDE, BEARING INNER RACE | 1 | |
| PWC46681 | LOAD ADAPTER A FLG RING | 1 | |
| PWC46752 | BUILD RING - I/C AND COMP. SUR GHE46292 | 1 | |
| PWC47207 | OIL AND BLEED FAIRING | 3 | |
| PWC50003 | DRIFT, BEARING SUPPORT SLEEVE INTO AGB HOUSING | 2 | |
| PWC50041 | BRACKET VALVE /O RING - Pratt & Whitney Canada | 4 | |
| PWC50158 | RETAINER BEARING BALLS - Pratt & Whitney Canada | 1 | |
| PWC50404 | RING DISK | 1 | |
| PWC50405 | RING - DISK | 2 | |
| PWC50476 | LOCATOR, BELLYBAND RING | 1 | |
| PWC50608 | RING, ADJUSTABLE - IMPELLER PWC50608 | 4 | |
| PWC50609 | RING ADJUSTABLE | 1 | |
| PWC50719-2 | DRIFT, RETAINING RING | 2 | |
| PWC50728 | DRIFT BEARING | 1 | |
| PWC50770 | Guide Assy bearing | 1 | |
| PWC51130 | retaining ring tool - Pratt & Whitney Canada | 4 | |
| PWC51594 | DRIFT NO12 BEARING | 1 | |
| PWC51767 | Retaining ring tool - Pratt & Whitney Canada | 3 | |
| PWC51771 | DRIFT, RETAINING RING | 3 | |
| PWC51918 | Support Ring 3RD Stage Stator Compressor | 1 | |
| PWC51919 | RING 2ND STAGE STATOR COMPRESSOR | 1 | |
| PWC51921 | Ring 3RD Stage Stator Compressor | 1 | |
| PWC52111 | DRIFT, NO. 4 BEARING HOUSING SLEEVE | 1 | |
| PWC52112 | DRIFT, NO. 4 BEARING HOUSING SLEEVE | 1 | |
| PWC54010 | DRIFT BEARING | 1 | |
| PWC54282-1 | Scriber Bearing Radius .06 | 1 | |
| PWC54282-2 | Scriber Bearing Radius .08 | 1 | |
| PWC54282-3 | Scriber Bearing Radius .01 | 1 | |
| PWC54282-4 | Scriber Bearing Radius .04 | 2 | |
| PWC54282-5 | Scriber Bearing Radius .02 | 1 | |
| PWC54282-6 | Scriber Bearing Radius .03 | 1 | |
| PWC54282-7 | Scriber Bearing Radius .05 | 1 | |
| PWC54386 | ADAPTER, MEASURING, OIL PUMP GEARSHAFT BACKLASH | 1 | |
| PWC54656 | PULLER, BEARING OIL PUMP DRIVE | 1 | |
| PWC54746 | GUIDE O-RING | 7 | |
| PWC54784 | PULLER, NO 29/30 BEARING (PWC37382 OLDER TOOL NUMBER) | 1 | |
| PWC55353 | DRIFT BEARING | 1 | |
| PWC55507 | Ring - Pratt & Whitney Canada | 2 | |
| PWC55804 | MEASURING AND LOADING FIXTURE | 1 | |
| PWC56237 | measuring pad | 1 | |
| PWC56243 | Adapter Ring | 1 | |
| PWC56414 | PUSHER BEARING - SUPERSEDES PWC37443 AND PWC37441 | 6 | |
| PWC56417 | DRIFT BEARING | 1 | |
| PWC56681 | loading ring | 1 | |
| PWC56773 | ring - Pratt & Whitney Canada | 3 | |
| PWC57207 | Feathering Pump Pad Cover | 1 | |
| PWC57582 | bearing holder | 1 | |
| PWC60101 | ADAPTER RING | 1 | |
| PWC61067 | GUIDE DAMPER SPRING | 1 | |
| PWC61068 | GUIDE DAMPER SPRING | 1 | |
| PWC61069 | GUIDE DAMPER SPRING | 1 | |
| PWC61151 | Vane Ring Air flow rig adapter | 1 | |
| PWC61468 | DISASSY-BEARING | 1 | |
| PWC61996 | Retaining ring - Pratt & Whitney Canada | 3 | |
| PWC62061 | Guide ring | 1 | |
| PWC62100 | DRIFT BEARING RETAINER | 1 | |
| PWC62296 | RING-ADAPTER | 1 | |
| PWC62658 | DRIFT 3 BEARING SUPPORT | 1 | |
| PWC62673 | PULLER RING BLADE RET. | 3 | |
| PWC62703 | PULLER HYDRAULIC BEARING | 1 | |
| PWC62769 | GUIDE RING | 1 | |
| PWC62770 | GUIDE RING SEAL | 1 | |
| PWC63182 | SUPPORT RING-IMPELLER EXDR | 1 | |
| PWC63286 | HEATER RING-IMPELLER-EXDUCER | 1 | |
| PWC64008 | Dummy race Box Set (No. 5 bearing ) | 3 | |
| PWC64008-876 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-882 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-888 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-894 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-900 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-906 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-910 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-916 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-922 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-928 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-934 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-940 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-946 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-952 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64008-958 | Dummy race (No. 5 bearing ) | 1 | |
| PWC64241-1 | GUIDE PINS NO.2 BEARING COVER ALIGNMENT | 5 | |
| PWC64241-5 | GUIDE PINS NO.2 BEARING COVER ALIGNMENT | 5 | |
| PWC64330 | COOLING RING - PRATT & WHITNEY CANADA | 4 | |
| PWC64598 | GAGE MEASURING PT DISC SPACER | 2 | |
| PWC65451 | GUIDE BEARING | 1 | |
| PWC65963 | RADIAL SETTING RING | 1 | |
| PWC67364 | Hyd. Puller # 5 Bearing | 1 | |
| PWC68368 | DRIFT NO 4 BEARING AREA | 1 | |
| PWC68647 | DEBURRING HOLDER-HP DISC ASSY | 1 | |
| PWC68978 | DRIFT NO 4 BEARING | 1 | |
| PWC69502 | Ring - Pratt & Whitney Canada | 2 | |
| PWC69522 | HOLDER BEARING H-2.1 | 1 | |
| PWC69689 | ring holder | 1 | |
| PWC70327 | MOUNT ring adapater | 1 | |
| PWC70572 | ADAPTER RING | 2 | |
| PWC70572 | Adapter Ring | 2 | |
| PWC70646 | Bearing Holder | 1 | |
| PWC70661 | MEASURING PAD | 1 | |
| PWC70865 | Ring - Pratt & Whitney Canada | 1 | |
| PWC71004 | holding ring | 1 | |
| PWC71016 | HOLDING FIXTURE -BEARING | 1 | |
| PWC71396 | RING ADJUSTABLE | 1 | |
| PWC71629 | Drift Bearing | 1 | |
| PWC71800 | measuring pad | 1 | |
| PWC71942 | RING - PRATT & WHITNEY CANADA | 4 | |
| PWC72204 | GUIDE TUBE CT VANE RING | 1 | |
| PWC72295 | SLAVE BEARING HOLDER | 1 | |
| PWC77004 | HYDRAULIC DRIFT-NO1 BEARING | 1 | |
| PWC85973 | ADAPTER RING - BUILD STAND | 1 | |
| PWC86120 | BEARING HOUSING-SAD | 1 | |
| PWC86526 | SHROUD CENTERING RING | 1 | |
| PWC86612 | DRIFT- NO 2 BEARING HOUSING | 1 | |
| PWC89837 | CYLINDER, HYDRAULIC, BEARING REPLACES | 5 | |
| PWC89853 | V-BAND CLAMP 18 DIA VANE RING | 1 | |
| PWC89945 | DEBURRING HOLDER | 1 | |
| PX-201 | SOLDERING IRON | 1 | |
| PYT1500005 | D RING .5X2.25IN NONCOND 10PK | 1 | |
| PYT1500010 | DRING MICRO ATTACH W/ADHE 10PK | 1 | |
| PYT1500116 | BELT LOOP W D RING 10PK | 1 | |
| PYT1500126 | TOOL POUCH W D RING AND 2 TRIG | 1 | |
| PYT1500133 | BUCKET 100LB DRAWSTRING CANVAS | 1 | |
| Q217N70 | QUAD RING 70DURO | 1 | |
| Q4214-559N | RING, QUAD | 1 | |
| Q46155 | ADAPTER FOR THE THREADED RING | 1 | |
| Q46156 | ADAPTER FOR THE THREADED RING | 1 | |
| Q46679 | TORQUE ADAPTER FOR SPHERICAL BEARING ASSEMBLY | 1 | |
| Q46680 | TORQUE ADAPTER FOR SPHERICAL BEARING | 1 | |
| Q46681 | TORQUE ADAPTER FOR SPHERICAL BEARING | 1 | |
| Q46682 | TORQUE ADAPTER FOR SPHERICAL BEARING ASSEMBLY | 1 | |
| Q47019 | GUIDE CONE FOR THE INSTALLATION OF BEARING | 1 | |
| QBR50SP5TT | LANDING GEAR BEARING | 1 | |
| QCS4723810 | SPRING RING, .775 DIA/.049 DIM | 1 | |
| QDS101339 | BEARING, SHAFT DRIVE | 1 | |
| QT-600-10-HWSP | QT-600-10-HWSP;1 Year Expedited Hardware Sparing Contract on QT-600-10 | 1 | |
| QT-600-HWSP | QT-600-HWSP;1 YEAR EXPEDITED HARDWARE SPARING CONTRACT | 1 | |
| QZ2472 | DUMMY ELEMENT AND O-RING | 1 | |
| R 260 / 641 | SOLDERING KIT | 1 | |
| R-23006778 | BEARING GUIDE | 1 | |
| R-5 -11 | 0.309-0.311 6.7 ±0.25 RUDDER FEEL AND CENTERING UNIT | 1 | |
| R-L623M2005101G315-01 | END-MEASURING | 1 | |
| R/C-AOAC-2 | COVER-VANE_PREVENT DAMAGE DURING GRD' SVC OR PARK_ANGLE OF ATTACK VANE COVER_[R/C-AOAC-2] | 13 | |
| R0618-109 | REPAIR KIT FIRING HEAD | 1 | |
| R0BUST05D | TOOL: SOLDERING INSTANT | 1 | |
| R100B | SOLDERING IRON | 1 | |
| R1106D | LOCKRING DRIVER | 1 | |
| R1106W | INSERT LOCKRING DRIVER | 4 | |
| R1713D | INSERT LOCKRING DRIVER | 1 | |
| R205D | LOCK RING DRIVE TOOL | 2 | |
| R205D3 | LOCKRING DRIVE TOOL | 1 | |
| R206D | ROSAN LOCKRING DRIVE TOOL | 2 | |
| R209D | LOCKRING DRIVER | 1 | |
| R2103 | VACUUM PUMP, CAPABLE OF 62-65 MB SUCTION, TO PULL SUCTION ON INFLATABLE DURING FOLDING | 2 | |
| R212D | INSERT LOCKRING DRIVER | 1 | |
| R21820 | DRAG BRACE SPRING EXTENDER ATR/72 | 2 | |
| R21820000 | DRAG BRACE SPRING EXTENDER ATR/72 | 6 | |
| R2184 | TOOL FOR INSTALLING RING AND PACKING | 1 | |
| R21848 | TOOL FOR INSTALLING RING AND PACKING | 1 | |
| R22 | SPRING, 1X8MHD | 3 | |
| R235 | 1/4" SOCKET BIT HOLDER WITH STANDARD RETAINING RING 1/4" SQUARE 1/4" FACOM | 1 | |
| R25A | 25 WATT SOLDERING KIT | 1 | |
| R260 | INDUSTRIAL SOLDERING GUN | 1 | |
| R300A220 | SOLDERING IRON 220V | 1 | |
| R3606D | LOCKRING DRIVE TOOL | 1 | |
| R3607D | LOCKRING DRIVE TOOL | 1 | |
| R3710D | INSERT LOCKRING DRIVER | 1 | |
| R3715D | INSERT LOCKRING DRIVER | 1 | |
| R3715W | INSERT LOCKRING DRIVER | 1 | |
| R40B | KIT, SOLDERING, INDU | 3 | |
| R460B | SOLDERING KIT | 1 | |
| R47163 | "TOOL FOR THE REMOVAL AND INSTALLATION OF THE SPRINGS (1-200)" | 1 | |
| R490 | INDUSTRIAL SOLDERING GUN | 2 | |
| R608 (60 WATT) | SOLDERING STATION | 1 | |
| R60A1 | SOLDERING PENCIL | 1 | |
| R60B | SOLDERING STATION, 6 | 3 | |
| R60B7 | TIP, SOLDERING, SCRE | 1 | |
| RA-S92GSE-1886-0 | Main Pylon Sliding Fairing Sling | 1 | |
| RA207D | LOCKRING DRIVE TOOL | 1 | |
| RABK6977 | RADIAL AXIAL BEARING INSPECTION TOOL | 1 | |
| RAM-8TM | ROD END W/ BEARING | 1 | |
| RAXZ560 | COMBINED BEARING / THRUST PLATE | 2 | |
| RB 92700-10311-041 | ROTATING AND STATIONARY SPHERICAL SEARING INSTALLER/REMOVER | 2 | |
| RB 92700-10316- 041 | SPRING CAPSULE HOLDING CLAMP | 2 | |
| RB 92700-10352-101 | DAMPER BEARING ALIGNMENT TOOL | 2 | |
| RB KIT A | Model 47 Spline Measuring Kit | 1 | |
| RB KIT B | Model 206 Spline Measuring Kit | 2 | |
| RB KIT C | Model 204/205/212 Spline Measuring Kit | 1 | |
| RB KIT D | Model 47/206 Spline Measuring Kit | 1 | |
| RB KIT E | Models 47/206/204/205/212 Spline Measuring Kit | 3 | |
| RB T101233 | Power Cylinders Valve Centering Pin | 2 | |
| RB T101336 | Duplex Bearing Nut Wrench | 2 | |
| RB T101503P | PLUG, BEARING INSTALLATION AND REMOVAL | 1 | |
| RB T101530-7 | Bearing Roll Stake Body | 1 | |
| RB T101736 | Alternate Quill Duplex Bearing Nut Wrench | 2 | |
| RB T101737 | Inner Race Duplex Bearing Alternator Quill Back-Up Ring | 1 | |
| RB T101859 | Press Adapter, Bearing Inner Ring | 1 | |
| RB T101936 | Bearing Removal Mast Tee Rod | 1 | |
| RB T101937 | Bearing Install And Removal Tool | 2 | |
| RB T101938 | End Plate, Mast Bearing Install/Removal | 1 | |
| RB T101943 | Tail Rotor Drive Bearing Install Sleeve | 2 | |
| RB T102020 | Tappered Ring Seal Guide | 1 | |
| RB T102085 | Bearing Removal & Anti Torque Device Plate Assembly | 1 | |
| RB T103003 | Adapter, Main Trans Input Pinion Bearing Removal | 1 | |
| RB T103065 | Tail Rotor Drive Shaft Bearing Hanger Locator | 1 | |
| RB T103101 | Adapter, Main Trans Input Bearing Installation | 1 | |
| RB T103103 | Bar, Input Quill Bearing Install and Remove | 1 | |
| RB T103110 | Adapter, Bearing Install | 1 | |
| RB T103114 | Main Transmission Bearing Removal Adapter | 1 | |
| RB T103116 | Main Transmission Bearing Install Adapter | 1 | |
| RB T103123 | Tail Rotor Drive Shaft Bearing Removal Split Plate Set | 1 | |
| RB T103131 | Transmission Bearing Install/Removal Adapter | 1 | |
| RB T103135 | Adapter Bearing Bar | 1 | |
| RB T103168 | Bearing Removal Adapter | 1 | |
| RB T103181 | Duplex Mast Bearing Install/Removal Clamp Set | 1 | |
| RB T103260-121 | Rod Set, Mast Bearing | 2 | |
| RB T103324-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 2 | |
| RB T103331-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 2 | |
| RB T915 | Bearing Preload Tool | 1 | |
| RB.6-100H-1 | Bridge Ring Probe, 100Hz-1KHz, .600" OD, .400" ID | 1 | |
| RB.6-500H | Bridge Ring Probe, 500Hz-2KHz, .60" OD, .250" ID | 1 | |
| RB.6-50H-1 | Bridge Ring Probe, 50Hz-500Hz, .600" OD, .400" ID | 1 | |
| RB.65-100H | Bridge Ring Probe, 100Hz-1KHz, .65" OD, .300" ID | 1 | |
| RB.7-500H-5 | Ring Bridge Probe 100Hz-5KHz .700" OD .400" ID | 1 | |
| RB.75-100H | Ring Bridge Probe 100Hz-1KHz, .750" OD .400" ID | 1 | |
| RB.75-1K | Ring Bridge Probe 1-10KHz, .750" OD .400" ID | 1 | |
| RB.75-500H-5 | Ring Bridge Probe 500Hz-10Khz .750" OD .350" ID | 1 | |
| RB.75-50H | Ring Bridge Probe 50-500Hz, , .750" OD .400" ID | 1 | |
| RB.8-500H-1 | Bridge Ring Probe, 500Hz - 5KHZ, .80" OD .300" ID, Triax | 1 | |
| RB.8-500H-1-4F | BRIDGE RING PROBE 500HZ - 5KHZ .80 | 1 | |
| RB.9-100H | Ring Bridge Probe 50-500Hz, .9" OD x .4" ID, Triax Connector | 1 | |
| RB0006-806-00674 | Bearing Separator 369D25418 T Bearing | 1 | |
| RB0006-806-00675 | Bearing Remover (369D25419) Or (369D25420) | 1 | |
| RB0006-809-00074 | Press Staked Bearing Staking Set | 1 | |
| RB0006-809-00088 | STAKING TOOL (PILOT AND PUNCH) (369A7951-45 BEARING) | 3 | |
| RB0006-809-00653 | Spring Expander-Spring Tail Rotor Pedal Bungee | 1 | |
| RB1.0-100H | Ring Bridge Probe 50-500Hz, 1.0" OD x .5" ID, Triax Connector | 1 | |
| RB1.0-100H-743 | Ring Bridge Probe 50-500Hz | 1 | |
| RB1.0-50H | Ring Probe, Bridge, 50-500Hz, .55 ID x 1.0 OD, Triax | 1 | |
| RB1.1-100H | Ring Probe, Differential, 1.1"OD x .65" ID, 100Hz-1KHz, Triax | 1 | |
| RB1.1-100H-2 | Ring Probe, Differential, 1.1"OD x .65" ID, 100Hz-1KHz, Triax | 1 | |
| RB1.2-100H-3 | Ring Probe, Differential, 1.25"OD x .80" ID, 100Hz-1KHz, Triax | 1 | |
| RB1.2-200H | Bridge Ring Probe, 50-300HZ, 1.2" OD, | 1 | |
| RB1.4-100H-2 | Bridge Ring Probe, 1.4" OD, .75" ID , 100Hz-1KHz | 1 | |
| RB1.4-100H-3 | Bridge Ring Probe, 1.4" OD, .62" ID , 100Hz-1KHz | 1 | |
| RB23003262 | CRIMPER-LOCKNUT, GAS PRODUCER TURBINE REAR BEARING . CRIMPS THE GAS PRODUCER TURBINE REAR BEARING LOCKNU | 2 | |
| RB23005426 | GUIDE, BEARING 2.5 | 2 | |
| RB23006778 | Guide Bearing Spur Adapter Gearshaft C-20 | 2 | |
| RB23008725 | Drift, No. 5 Bearing Installation | 2 | |
| RB23008741 | No. 2 Bearing Ball Guide | 2 | |
| RB23033027 | PULLER----BEARING AND MATING SEAL RACE, COMPRESSOR FRONT | 2 | |
| RB23033030 | Drift-Installation Compressor Frt Bearing Inner Race | 2 | |
| RB23033031 | Fixture-Holding Front Bearing Housing | 2 | |
| RB23033032 | Drift-Compressor Front Bearing Outer Race | 2 | |
| RB23033033 | Drift-Guided-Compressor Front Bearing Ring Seal | 2 | |
| RB23034275 | Adapter-Pilot, Rear Compressor Bearing Puller | 1 | |
| RB40 | HSS 45 DEG CHAMFERING TOOL | 1 | |
| RB40/MC/AIRBUS/001 | Airbus A320 Gear Rib Boring and Facing Machine | 1 | |
| RB40MCAIRBUS003 | MLG BORING FIXTURE (KINDLY ADVISE MANUFACTURER AND PROVIDE CATALOG) | 1 | |
| RB429WA-MM-67-152-1-2 | Bearing Replacement Work Aid #1 | 1 | |
| RB429WA-MM-67-152-2-2 | Bearing Replacement Work Aid #2 | 1 | |
| RB6795590 | Puller-Bearing-Gas Producer & Power Turbine | 2 | |
| RB6795590-3A | Finger Tip, Bearing Puller; Gas Producer Turbine, Power Turbine & Compressor | 2 | |
| RB6795590-3B | Finger, Bearing Puller; Gas Producer Turbine, Power Turbine & Compressor | 2 | |
| RB6795635 | Install/Removal Gas Producer Tail Rotor Bearing Nut Tie Bolt Nut Wrench | 2 | |
| RB6795990 | Dummy Bearing Power Turbine Shaft Front | 2 | |
| RB6795992 | Gas Producer Turbine Rear Dummy Bearing | 2 | |
| RB6796946 | Install & Removal Accessory Gear Box Bearings Drift | 2 | |
| RB6796949 | Accessory Gear Box Bearings Installation Drift | 2 | |
| RB6796952 | Forward Bearing & Seal Compressor Puller | 1 | |
| RB6796966 | Retaining Ring Fuel Ctrl Drive Bearing Pliers | 2 | |
| RB6798046 | Wrench-Bearing Locknut, Gas Producer | 2 | |
| RB6798048 | Pressure Oil Pump Body Bushing Ring | 2 | |
| RB6798796 | Damper Vibration Compressor Frt Bearing Drift | 2 | |
| RB6798982 | Planetary Gear & Bearing Assembly Wrench & Holder | 1 | |
| RB6799518 | Gas Producer Ball Bearing & Labyrinth Seal Puller | 2 | |
| RB6799700 | Puller-Vibration Damper, Compressor Front Bearing | 2 | |
| RB6872543 | PRESS INSTALLATION POWER TURBINE REAR AND GAS PRODUCER TURBINE FRONT BEARING | 2 | |
| RB6872575 | PIN RINGGING COORDINATOR LINKAGE | 2 | |
| RB6872746 | Puller, Power Train Drive Gear Bearing | 2 | |
| RB6886201 | GUIDE----POWER TAKEOFF ROLLER BEARING | 2 | |
| RB6887819 | Gas Producer & Power Turbine Supports Bearing Bore Checking Fixt | 1 | |
| RB6893358 | Wrench, Install & Removal Gas Producer Turbine Frt. Bearing Retaining Nut | 2 | |
| RB6893379 | Drift, Power Train Drive Gear Bearings | 2 | |
| RB6893385 | Guide, Power Takeoff Roller Bearing | 2 | |
| RB6893390 | Tqmtr. Support Shaft Rlr. Bearing Drift | 2 | |
| RB6893397 | Install Fuel Pump Splined Adapter Bearing Drift | 2 | |
| RB6893512 | Drift Bearing Idler & Cent Breather | 2 | |
| RB6893514 | Drift Bearing Fuel Pump Strt. Generator | 2 | |
| RB6893518 | Drift, 12Mm X 37Mm X 12Mm & 12Mm X 28Mm X 8Mm Bearings | 2 | |
| RB6893522 | Bearing Idler Gearshaft Drift | 2 | |
| RB6893526 | Pliers, Retaining Ring, Fuel Pump-Fuel Ctrl Drive Bearing | 2 | |
| RB6893532 | F&R Bearing Power Take Off Drift | 2 | |
| RB6893739 | PULLER--COMPRESSOR REAR BEARING, OIL SLINGER AND SEAL | 2 | |
| RB6895538 | USED DURING ASSEMBLY OF THE TURBINE | 2 | |
| RB877406-5 | Damper Bearing Cutter | 2 | |
| RB877528-5 | Damper Bearing Cutter | 2 | |
| RB877900-6 | Main Rotor Swash Plate Drive Link Bearing Flange Cutter | 1 | |
| RBA1710-30101-2B | Tail Rotor Feathering Bearing Install Tool (2 Bld) -7/-9/-17/-19 | 3 | |
| RBA1710-30101-4 | Tail Rotor Feathering Bearing Install Tool (4 Blade) | 2 | |
| RBA9015 | Bearing Retractor (Otr Race-Main Rotor Output "C" Model) | 1 | |
| RBA9962 | Tail Rotor Bearing Extractor "C" Model | 1 | |
| RBA9967 | Puller, Bearing "C" Model | 1 | |
| RBD29985 | Bungee Spring Compressor Tool Rod & Channel | 2 | |
| RBE 105-14101W2 | EXTR FOR OUTER NEEDLE BEARING | 2 | |
| RBE-350TRDS | Tail Rotor Drive Shaft Bearing Run Out Gauge | 2 | |
| RBE-350TRDS-M | TAIL ROTOR DRIVE SHAFT BEARING RUN OUT GAUGE WITH CALIBRATION CERT | 2 | |
| RBE105-14101W2 | Extractor For Outer Needle Bearing | 2 | |
| RBE105-14101W7 | Drive Tool for Needle Bearing | 2 | |
| RBE105-14181W1 | NEEDLE BEARINGS ASSEMBLY FIXTURE | 3 | |
| RBE105-14181W3 | NEEDLE BEARINGS EXTRACTOR | 2 | |
| RBE105-14181W4 | NEEDLE BEARINGS EXTRACTOR | 3 | |
| RBE105-31702W23 | MEASURING DEVICE | 2 | |
| RBE105-31702W24 | Measuring Device | 2 | |
| RBE332A91-0025-00 | Steering Bar Radar O.R.B | 1 | |
| RBE332A93-3405-00 | Shaft Bearing Tail Drive Assembly. Tool | 2 | |
| RBE350A93-1280-00 | TAIL BLADES RING EXCHANGE | 2 | |
| RBE350A93-3410-00 | Drive Shaft Shring Thimble | 3 | |
| RBE350A93-3501-20 | Extraction Tool, Hydraulic Pump Pulley Bearing | 2 | |
| RBE703A94-3000-00 | Tail Rotor Head Bearing Clearance Measuring Tool | 1 | |
| RBEL623M-2005-101G315-01 | End Measuring Gauge Set | 2 | |
| RBEL623M2005101G315-01 | END MEASURING GAUGE SET | 2 | |
| RBEM673V4001101-5 | LONG RING END ASSY | 2 | |
| RBH9926 | Main Transmission Bearing Inner Race Assembly Tool, "C" Model | 1 | |
| RBH9927 | Bearing Installation Tool "C" Model | 1 | |
| RBI8401T | Wiring System Service Kit for the BAe Jetstream 31, 32 and 41 Aircraft | 1 | |
| RBI8409T | Dassault Falcon 50EX Wiring System Maintenance Kit | 1 | |
| RBI8411T | Bombardier (De Havilland) Dash 8 Q400 Wiring System Maintenance Kit | 1 | |
| RBI8420T | Wiring System Service Kit for the Cessna Citation I and II Aircraft | 1 | |
| RBI8421T | Cessna Citation I, II, and III Wiring System Maintenance Kit | 1 | |
| RBI8423T | Cessna Citation V Model 560 Wiring System Maintenance Kit | 1 | |
| RBI8424T | McDonnell Douglas DC8, DC9, DC10 Wiring System Maintenance Kit | 1 | |
| RBI8426T | Canadair CL-600, -601, & -601-3A Challenger Aircraft Wiring System Maintenance Kit | 1 | |
| RBI8428T | Wiring System Service Kit for the DeHavilland Dash 7 Aircraft | 1 | |
| RBI8429T | Dassault Falcon 10,100,20,200,50 & 900 Wiring System Maintenance Kit | 1 | |
| RBI8431T | Canadair Regional Jet CRJ100/200 Wiring System Maintenance Kit | 1 | |
| RBI8439T | 228 Dornier Wiring System Maintenance Kit | 1 | |
| RBIR7028 | Swashplate Bearing Install and Removal Tool | 2 | |
| RBPA003 | Tail Rotor Drive Shaft Bearing Lube Tool | 2 | |
| RBSC4101-4 | Drill Press Bearing Cutter | 2 | |
| RBSC4101-5 | DRILL PRESS BEARING CUTTER | 2 | |
| RBSC4101-7 | Drill Press Bearing Cutter | 1 | |
| RBSC4103-10 | Drill Press Bearing Cutter | 1 | |
| RBSC4103-6 | Drill Press Bearing Cutter | 2 | |
| RBSC7029 | Drill Press Bearing Cutter | 2 | |
| RBSC7048 | Drill Press Bearing Cutter | 2 | |
| RBSC7050 | Drill Press Bearing Cutter | 2 | |
| RBSC7051 | Drill Press Bearing Cutter | 2 | |
| RBSC7188 | Drill Press Bearing Cutter | 2 | |
| RBSC7205 | Drill Press Bearing Cutter | 2 | |
| RBSC7245 | Drill Press Bearing Cutter | 1 | |
| RBST2128 | STAKING TOOL – DRIVE LINK BEARING | 3 | |
| RBT103263 | BEARING HOLDER BAR | 1 | |
| RBT18015 | Bearing Replacement Work Aid Kit | 2 | |
| RBT18023 | Oil Pump Bearing Replacement Work Aid | 1 | |
| RBT18024 | Swashplate Link & Drive Link Bearing Work Aid | 2 | |
| RBT18402 | Forward Air Transport Shoring Jack | 1 | |
| RBT18409 | Adapter Set, Aircraft Mooring | 1 | |
| RBT18517 | Tail Rotor Centering Work Aid | 1 | |
| RBT18518 | Main Rotor Trunnion Centering Tool With Mandrels | 1 | |
| RBT18519 | Tail Rotor Yoke Bearing Work Aid | 2 | |
| RBT18530-A | Main Rotor Trunnion Centering Work Aid | 1 | |
| RBT18530-B | Main Rotor Trunnion Centering Work Aid | 1 | |
| RBT18531 | 206 Tail Rotor Trunnion Bearing Removal Work Aid | 2 | |
| RBT18535 | Garter Spring Work Aid | 1 | |
| RBT18541 | Landing Gear Center Beam Bearing Install/Remove Tool | 1 | |
| RBT18542 | Tail Rotor Gearbox and Bearing Alignment Kit | 1 | |
| RBT18566 | Transmission Support Link Deck Mount Bearing Replacement Set | 1 | |
| RBT18568 | Tail Rotor Centering Work Aid | 2 | |
| RBT18587 | Swashplate Gimbal Ring Bolt Removal Work Aid | 1 | |
| RBT18632 | Landing Gear Keel Bearing Install/Removal Tool | 2 | |
| RBT18648 | Lead Lag Dampener Bearing Press | 2 | |
| RBT18654 | Output Shaft Bearing Pressing Cylinder Work Aid | 1 | |
| RBT18655 | Input Pinion Bearing Pressing Cylinder Work Aid (206 A/B) | 1 | |
| RBT200078 | Trunnion Bearing Removal & Install Work Aid | 2 | |
| RBT400265 | RING, WEAR SLEEVE INTERMEDIATE G/B (HP, EP) | 2 | |
| RBT400329 | Tail Rotor Drive Bearing Removal Tool | 1 | |
| RBT67828 | Main Rotor Hub Tapered Bearing Tool Set | 2 | |
| RBW 109-3401-61-101 | TOOL ASSY T/R DRIVE BEARING HANGER BUSHING CENTERING | 2 | |
| RBW109-3130- 53-111 | TOOL,T/R PITCH CHANGE SLIDER RING NUT REMOVAL/INSTALATION | 2 | |
| RBW109-3130- 69-101 | TOOL,T/R PITCH CHANGE HOUSING DUPLEX BEARING INSTALLATION | 2 | |
| RBW109-3130-69-101 | Tail Rotor Pitch Change Housing, Duplex Bearing Install | 2 | |
| RBW109-3130-70-101 | Tail Rotor Pitch Change Housing Duplex, Bearing Removal | 2 | |
| RBW109-3130-73-101 | Ring, Tail Rotor Slider Bushing Install | 2 | |
| RBW109-3130-84-101 | TAIL ROTOR DRIVE SHAFT RING NUTS REMOVAL/INSTALLATION TOOL. | 2 | |
| RBW109-3401- 70-115 | ROTOR BRAKE ADAPTER RING NUT REMOVE/INSTALL TOOLS | 2 | |
| RBW109-3401-62-101 | TAIL ROTOR DRIVE BEARING PROTECTOR | 2 | |
| RBW109-3401-70-115 | Rotor Brake Adapter Ring Nut Remove/Install Tools | 2 | |
| RBW1099-3130-70-101 | TOOL,T/R PITCH CHANGE DUPLEX BEARING REMOVAL | 1 | |
| RBW6000G00131-8G | PULLER KIT, M/R AND T/R UPPER CONICAL RING REM | 2 | |
| RBW6205G04531-3G | Main Rotor Sliding Ring Centering Tool | 2 | |
| RBW6220G00131-8G | MR SLIDING RING CENTERING TOOL | 2 | |
| RBW6230G04031-8G | TOOL,M/11SCISSORFLANGEDBEARING REM/INSTL | 2 | |
| RBW6305G05833-3G | Tool Kit, Tail Rotor Drive Quill Ring Nut Remove Install | 2 | |
| RBW6305G10233-3G | Tool, Tail Rotor Drive Quill Ring Nut Remove Install | 2 | |
| RBW6305G31231-3G | TOOL, AGB ECS DRIVE GEAR RING NUT | 2 | |
| RBW6320G14431-8G | TOOL KIT, T/R DRIVE QUILL RING NUT REM/INST | 2 | |
| RBW6405G00631-3G | Tail Rotor Duplex Bearing Removal | 2 | |
| RBW6405G00631-3G-3G | EXTRACTOR, TR DUPLEX BEARING | 1 | |
| RBW6405G04032-3G | AW139 Tail Rotor Duplex Bearing Tool Kit | 2 | |
| RBW6405G04132-3G | Tail Rotor Duplex Bearing Install | 2 | |
| RBW6430G03331-8G | TR DUPLEX BEARING REMOVAL/INSTALLATION TOOL | 2 | |
| RBW6505G00431-3T | AW139 Trd Support Bearing Repair Tool Kit | 3 | |
| RBW6510G04431-6F | TAIL ROTOR SUPPORT BEARING (NEW TDS) ASSEMBLY/DISASSEMBLY TOOL KIT | 2 | |
| RBYA605 | RING RATCHET SET, 25 DEGREE OFFSET | 2 | |
| RC-MF-P4Z01 | MULTIFONCTION RAPID CURING | 1 | |
| RCD | RAPID CURING DEVICE | 1 | |
| RCEWSCPA320 | A320 WINDSHIELD RAPID CURING SYSTEM | 1 | |
| RCSK8-02-001 | TOOL KIT - REPAIRING, HYDRAULIC TUBES | 1 | |
| RCSK8-02-004 | KIT, RYNGLOK TUBE REPAIR. INCLUDES ENERPAC HAND PUMP, CUTTING AND DEBURRING TOOLS. | 2 | |
| RCWSP4Z01 | W INDSHIELD RAPID CURING SYSTEM | 3 | |
| RD3606D | LOCKRING DRIVE TOOL | 1 | |
| RDP 1.0/.5-200H | REFLECTION RING PROBE OD 1.0 ID.500 200HZ-10KHZ | 2 | |
| RDP.3-10K-4F | Reflection Ring Probe, .6"OD, .3"ID, 5-30KHz, 4-pin Fischer | 1 | |
| RDP.3-5K-4F | Reflection Ring Probe, .7" OD, .3"ID, 2-20KHz, 4-pin Fischer | 1 | |
| RDP.4-10K-4F | Reflection Ring Probe, .85"OD, .4"ID, 5-30KHz, 4-pin Fischer | 1 | |
| RDP.4-5K-4F | Reflection Ring Probe, .87" OD, .4"ID,1-20KHz, 4-pin Fischer | 1 | |
| RDP.45/2K | Reflection Ring Probe, .83"OD, 0.45"ID, 2KHz | 1 | |
| RDP.45/2K/CFRP | Reflection Ring Probe, .83"OD, 0.45"ID, 2KHz | 1 | |
| RDP.5-100H | Reflection Ring Probe, .5" OD, .325" ID, 100Hz-1Khz, Triax | 1 | |
| RDP.5-100H-4L | Reflection Ring Probe, .5" OD, .325" ID, 100Hz-1Khz, 4 Pin Lemo | 1 | |
| RDP.5-500H | Reflection Ring Probe, .5"OD | 1 | |
| RDP.5-50H | Reflection Ring Probe, .53"OD, .15" ID, 50-500HZ | 1 | |
| RDP.5/.25-300H | Reflection Ring Probe, .5"OD x .25" ID w/ Triax, 300Hz Center Frequency | 1 | |
| RDP.54-500H | Reflection Ring Probe, .54 OD x .33 ID, 200Hz-10KHz | 1 | |
| RDP.54-800H | Reflection Ring Probe, .54 OD x .33 ID, 500Hz-2Khz | 1 | |
| RDP.55/2K | Reflection Ring Probe, .925"OD, 0.55"ID, 2KHz | 1 | |
| RDP.55/2K/CFRP | Reflection Ring Probe, .925"OD, 0.55"ID, 2KHz | 1 | |
| RDP.6-.33/500H | RING DONUT PROBE, 500 HZ TO 20 KHZ FREQUENCY, REFLECTION ABSOLUTE, SHIELDED, 0.335 IN (8.51 MM) INTERNAL DIAMETER AND 0.600 IN (15.24 MM) EXTERNAL DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| RDP.6-100H-1 | Reflection Ring Probe, Ø.6"OD, .385" ID, 100Hz-1KHz, Triax Connector | 1 | |
| RDP.6-100H-1-4L | Reflection Ring Probe, Ø.6"OD, .385" ID, 100Hz-1KHz, 4 Pin Lemo | 1 | |
| RDP.6-10K-5 | RING PROBE, NDT | 1 | |
| RDP.6-1K-4L | Reflection Ring Probe, Ø.600"OD, .250" ID, 1-10KHz, 4pin Lemo | 1 | |
| RDP.6-200H-1 | Reflection Ring Probe, 100Hz-5KHz, .25 " ID .6" OD, Triax Connector | 1 | |
| RDP.6-2K-5 | Reflection Ring Probe, .6" OD, .255"ID min, 500Hz-20KHz, Triax Connector | 1 | |
| RDP.6-40K-4F | Reflection Ring Probe, Ø.600"OD, .3"ID, 30-50KHz, Fischer 4-pin | 1 | |
| RDP.6-500H | Reflection Ring Probe, Ø.600"OD, .250"ID, 500Hz to 2KHz, Triax Connector | 1 | |
| RDP.6-500H-1-TI | Reflection Ring Probe, Ø.600"OD, 500Hz, Triax Connector, 1"useable height working, as Titanium. | 1 | |
| RDP.6-500H-2M | Reflection Ring Probe, Ø.600"OD, .250"ID, 500Hz to 2KHz, 2-pin Microdot | 1 | |
| RDP.6-500H-5-TF | Reflection Ring Probe, .255"ID min, 500HZ-10KHZ, Triax Connector | 1 | |
| RDP.600-.320/500H | Reflection Ring Probe, .6" OD .32" ID 500Hz-2KHz, going through AL.100-.200, Triax Connector | 1 | |
| RDP.65-.45-500H | Reflection Ring Probe .65" OD .45" ID, 500Hz-2KHz, Triax Connector | 1 | |
| RDP.65-100H | Reflection Ring Probe, Ø.65"OD, .300" ID, 100Hz to 1KHz, Triax Connector | 1 | |
| RDP.65-1K | Reflection Ring Probe, Ø.65"OD, .300" ID, 1-10KHz, Triax Connector | 1 | |
| RDP.65-1K-4L | Reflection Ring Probe, Ø.65"OD, .300" ID, 1-10KHz, 4pin Lemo | 1 | |
| RDP.65-500H | Reflection Ring Probe, Ø.65"OD, .300" ID, 500Hz-2KHz, Triax Connector | 1 | |
| RDP.65-500H-2M | Reflection Ring Probe, Ø.65"OD, .300" ID, 500Hz-2KHz, 2-pin Microdot | 1 | |
| RDP.67-.4/2K | Reflection Ring Probe, .67 OD, .4 ID, Height of .75, 800Hz-10Khz, Tested on .150 Al | 1 | |
| RDP.67-4/2K-4L | REFLECTION RING PROBE .67 OD .4 ID HEIGHT OF .75, 800 HZ-10 KHZ TESTE ON .150 AL 4 PIN LEMO | 1 | |
| RDP.7-.35-100H | Reflection Ring Probe .7" OD .35" ID 1.1" Height, 100Hz-5Khz | 1 | |
| RDP.7-100H | Reflection Ring Probe, .700"OD, .350" ID, 100Hz-1KHz, Triax Connector | 1 | |
| RDP.7-100H-1 | Reflection Ring Probe, Ø.75 OD x .35 ID, 50Hz-3KHz, Triax Connector | 1 | |
| RDP.7-100H-2 | Reflection Ring Probe, Ø.7"OD, 50Hz-3KHz, Triax Connector | 1 | |
| RDP.7-100H-4F | Reflection Ring Probe, Ø.700"OD, 50Hz-8KHz, Fischer 4-pin | 1 | |
| RDP.7-100H-5 | Reflection Ring Probe, Ø.675"OD, 100Hz to 8KHz, Triax Connector | 1 | |
| RDP.7-100H-7 | Reflection Ring Probe, Ø.700"OD x .333"ID, 100Hz-5KHz, TF Connector, 600k Center Freq | 1 | |
| RDP.7-1K | Reflection Ring Probe, Ø.700" OD x .35 ID, 1kHz-10kHz, Triax | 1 | |
| RDP.7-200H-2 | Reflection Ring Probe 100Hz-5KHz, .7" OD, Triax Connector | 1 | |
| RDP.7-200H-2-2M | Reflection Ring Probe, 100Hz-5KHz, .700" OD, 2-PIN Microdot | 1 | |
| RDP.7-200H-4F | Reflection Ring Probe, Ø.700"OD x Ø.400"ID, 100Hz-10KHz, Fischer 4-pin | 1 | |
| RDP.7-2K-1 | Reflection Ring Probe, Ø.675" OD x .335 ID, 500Hz-20KHz, Triax Connector, NDT3118 | 1 | |
| RDP.7-2K-2 | Reflection Ring Probe, .7" OD, .375" ID, 500Hz-20KHz, Triax Connector | 1 | |
| RDP.7-2K-5 | Reflection Ring Probe, .7" OD, .360"ID, 500Hz-20KHz, Triax Connector | 1 | |
| RDP.7-2K-5-4F | Reflection Ring Probe, .355"ID min, 500Hz-20KHz, 4-pin fischer | 1 | |
| RDP.7-500H | Reflection Ring Probe, Ø.7"OD, .35" ID, 500Hz to 2KHz, Triax Connector | 1 | |
| RDP.7-500H-1-4L | Reflection Ring Probe, Ø.7"OD, .325" ID, 500Hz to 2KHz, 4-pin Lemo Connector | 1 | |
| RDP.7-50H | Reflection Ring Probe, Ø.7"OD x Ø.35"ID, 50Hz to 500Hz, Triax Connector | 1 | |
| RDP.75-.30/1K | Reflection Ring Probe .75 OD .30 ID 1KHz | 1 | |
| RDP.75-.30/8K | Reflection Ring Probe .75 OD .30 ID 8KHz | 1 | |
| RDP.75-100H | Reflection Ring Probe, .750" OD, .400" ID, 100Hz to 1KHz, Triax Connector | 1 | |
| RDP.75-1K | Reflection Ring Probe, .75"OD, .400" ID, 1-10KHz, Triax Connector | 1 | |
| RDP.75-1K-2M | Reflection Ring Probe, .75"OD, .400" ID, 1-10KHz, 2 pin Microdot | 1 | |
| RDP.75-1K-4F | Reflection Ring Probe, .75"OD, .400" ID, 1-10KHz, 4-Pin Fischer | 1 | |
| RDP.75-200H | Reflection Ring Probe,.750"OD, .400" ID, 200Hz-5KHz, Triax Connector | 1 | |
| RDP.75-500H | Reflection Ring Probe, Ø.75"OD, .400" ID, 500Hz to 2KHz, Triax Connector | 1 | |
| RDP.75-500H-1-4L | Reflection Ring Probe, Ø.75"OD, .385" ID, 500Hz to 2KHz, 4-pin Lemo Connector | 1 | |
| RDP.75-500H-5 | Reflection Ring Probe, .750" OD, .400" ID, 500Hz-2KHz | 2 | |
| RDP.75-500H-6 | Reflection Ring Probe .75" OD, Triax Connector | 1 | |
| RDP.75-5K | Reflection Ring Probe, Ø.75"OD, .400"ID, 5-20KHz, Triax Connector | 1 | |
| RDP.75/.40-200K CFRP | Reflection Ring Probe, .75" OD, .40" ID, 1" Height10-200KHz going through CFRP, Triax Connector | 1 | |
| RDP.750-.400/100Hz | Reflection Ring Probe, .750" OD, .400" ID, 100HZ-10KHz, Triax Connector | 1 | |
| RDP.750-.450/400H | Reflection Ring Probe, .750" OD, .450" ID, 400Hz-5KHz, Triax Connector | 1 | |
| RDP.78-500H-1-TI | Reflection Ring probe, Ø.78" OD, 500Hz, Triax Connector, Reflection Triax connector, 1" useable height working, as Titanium. | 1 | |
| RDP.8-.32/2K | Reflection Ring Probe, .8" OD, .32" ID, height 1" run at 2 K going thru AL | 1 | |
| RDP.8-.34/2K | Reflection Ring Probe, .8" OD, .34" ID, height 1" run at 2 K going thru AL | 1 | |
| RDP.8-.35/2K | Reflection Ring Probe, .8" OD, .35" ID, Height 1" useable at 2K going thru AL | 1 | |
| RDP.8-.45/2K | Reflection Ring Probe, .8" OD .45" ID 500Hz-5KHZ | 1 | |
| RDP.8-100H | Reflection Ring Probe, Ø.8"OD x Ø.450"ID, 100Hz to 1KHz, Triax Connector | 1 | |
| RDP.8-100H-5 | Reflection Ring Probe, .80 OD x .40 ID, 50Hz-3KHz | 1 | |
| RDP.8-1K | Reflection Ring Probe, Ø.8"OD, .450" ID, 1 to 10KHz, Triax Connector | 1 | |
| RDP.8-500H | Reflection Ring Probe, Ø.8"OD, .450" ID, 500Hz to 2KHz, Triax Connector | 1 | |
| RDP.8-500H-1/2M | Reflection Ring Probe w/ 2-Pin Microdot, 100Hz-10KHz | 1 | |
| RDP.8-50H | Reflection Ring Probe, Ø.8"OD x Ø.450"ID, 50Hz to 500Hz, Triax Connector | 1 | |
| RDP.8-50H-4F | Reflection Ring Probe, Ø.8"OD x Ø.450"ID, 50Hz to 500Hz, 4-Pin Fischer | 1 | |
| RDP.8/.4-200H | Reflection Ring Probe, Ø.8"OD x Ø.4"ID, 200 -600Hz, Triax Connector | 2 | |
| RDP.8/.4-500H | Reflection Ring Probe, Ø.8"OD x Ø.4"ID, 500Hz to 2KHz, Triax Connector | 1 | |
| RDP.83-1K | Reflection Ring Probe, .83" OD, .33"{ ID, 100Hz-1K | 1 | |
| RDP.85-100H | Reflection Ring Probe, Ø.850"OD x Ø.500"ID, 100Hz-1KHz, Triax Connector | 1 | |
| RDP.85-100H-1 | Reflection Ring Probe, 100Hz-5KHz, .375" ID x .85" OD, Triax | 1 | |
| RDP.85-200H-4F | Reflection Ring Probe, Ø.850"OD x Ø.500"ID, 100Hz-10KHz, Fischer 4-pin | 1 | |
| RDP.85-500H-2M | Reflection Ring Probe, Ø.850"OD x Ø.500"ID, 500Hz-2KHz, 2-Pin Microdot | 1 | |
| RDP.85-50H | Reflection Ring Probe, Ø.850"OD x Ø.500"ID, 50-500Hz, Triax Connector | 1 | |
| RDP.85-5K-2M | Reflection Ring Probe, .85" OD, .500" ID, 5-20KHz, Triax Connector | 1 | |
| RDP.87-.4/10K | Reflection Ring Probe, .87" OD, .4" ID, Height 1", 250Hz-40KHz | 1 | |
| RDP.870-.310/250Hz | Reflection Ring Probe, .87" OD, .31" ID, 250Hz-2KHz | 1 | |
| RDP.9-.45/500H | Reflection Ring Probe, .9"OD, .45"ID height 1" 500-800Hz | 1 | |
| RDP.9-100H | Reflection Ring Probe, Ø.900"OD x Ø.550"ID, 100Hz-1KHz, Triax Connector | 1 | |
| RDP.9-100H-2 | Reflection Ring Probe, .50" ID x .1.0" OD, 50Hz-5KHz 2 pin microdot | 1 | |
| RDP.9-100H-5 | Reflection Ring Probe, .45" ID x .9" OD, 50Hz-5KHz | 2 | |
| RDP.9-1K | Reflection Ring Probe, .900"OD .550"ID, 1-10KHz, Triax connector | 1 | |
| RDP.9-500H | Reflection Ring Probe, .900"OD .550"ID, 500Hz-2KHz Triax connector | 1 | |
| RDP.9-500H-Ti | Reflection Ring Probe, .41"ID x .90"OD, 500Hz-20KHz, Triax connector | 1 | |
| RDP.9-50H | Reflection Ring Probe, .900"OD .550"ID, 50-500Hz Triax connector | 1 | |
| RDP.9-50H-1 | Reflection Ring Probe .900"OD .550"ID height .500", 50-500Hz Triax connector | 1 | |
| RDP.9-50H-4F | Reflection Ring Probe, .900"OD .550"ID, 50-500Hz, 4-Pin Fischer | 1 | |
| RDP.9/.4-500H CFRP | Reflection Ring Probe, .9"OD, .4"ID, 500Hz-20KHz, TESTING THRU CFRP TO AL | 1 | |
| RDP.95/.655-12KHz Ti | Reflection Ring Probe, .950" OD, .680" ID, Height 1.25 Frequency 500-20KHz, center freq 12KHz, inspect Ti, | 1 | |
| RDP1-2-6/50HZ-3KHZ TECHNA NDT | LOW FREQUENCY REFLECTION RING PROBE MICRO DOT PROBE CONNECTION AND LEMO 12PIN OR BNC MENTOR EM INSTRUMENT CONNECTION | 1 | |
| RDP1.0-.4/2K | Reflection Ring Probe, 1.0 OD, .400 ID, 2KHz Max Height .710 Thru AL | 1 | |
| RDP1.0-.41/100H | REFLECTION RING PROBE 100HZ-1KHZ, OD 1.0 ID 0.41, TRIAX CONNECTOR | 1 | |
| RDP1.0-.5/200H | Reflection Ring Probe OD 1.0 ID.500 200Hz-10KHz | 2 | |
| RDP1.0-.5/50H | REFLECTION RING PROBE OD1.0 ID .5 HEIGHT 1.4, 50HZ-3KHZ | 1 | |
| RDP1.0-.5/50Hz | Reflection Ring Probe OD1.0 ID .5 Height 1.4, 50Hz-3KHz | 1 | |
| RDP1.0-.500/100H | Reflection Ring Probe OD 1.0 ID.500 100Hz-4KHz | 1 | |
| RDP1.0-.6/400H | Reflection Ring Probe OD1.0 ID .6 Height 1" operates 400Hz | 1 | |
| RDP1.0-.7/3KHz-CFRP | Reflection Ring Probe OD 1.0 ID.7 500Hz-20KHz CFRP | 1 | |
| RDP1.0-100H | Reflection Ring Probe, 100Hz-1KHz, .6" ID x 1.0" OD, Triax | 1 | |
| RDP1.0-100H-1 | Reflection Ring Probe w/ Triax connector..50Hz-3KHz .5 ID 1.09 OD | 1 | |
| RDP1.0-100H-1/2M | Reflection Ring Probe w/ 2pin Microdot..50Hz-3KHz .5 ID 1.09 OD | 1 | |
| RDP1.0-100H-1/4L | Reflection Ring Probe w/ 4 Lemo ..50Hz-3KHz .5 ID 1.09 OD | 1 | |
| RDP1.0-100H-5 | Reflection Ring Probe w/ Triax connector, .5" ID x .935" OD, 50Hz-3KHz | 1 | |
| RDP1.0-100H-5-7L | RING DONUT PROBES | 2 | |
| RDP1.0-100H-5/7L | Reflection Ring Probe w/ 7 Pin Lemo Powerlink, .5" ID x .935" OD, 50Hz-3KHz | 2 | |
| RDP1.0-100H-6 | Reflection Ring Probe, 100Hz-5KHz, .500" ID x 1.0" OD, Triax | 2 | |
| RDP1.0-250H-4L | Reflection Ring Probe, Ø1.0"OD, .300"ID, 250Hz to 40KHz, 4pin Lemo Connector | 1 | |
| RDP1.0-500H-Ti | Reflection Ring Probe, Ø.55ID x Ø1.0OD, 500Hz to 20KHz, Triax Connector | 1 | |
| RDP1.0-50H | Ring Probe, 50Hz-500Hz, .50 ID x 1.1 OD, Triax | 1 | |
| RDP1.0/.5-200H | Reflection Ring Probe OD 1.0 ID.500 200-600Hz | 2 | |
| RDP1.0/.55-200K CFRP | Reflection Ring Probe OD 1.0 ID .55 1" Height going through CFRP | 1 | |
| RDP1.0/.65-200K | Reflection Ring Probe, 10-200KHz, .65" ID x 1.0" OD, Triax | 1 | |
| RDP1.1-.61/100H | REFLECTION RING PROBE 100HZ-1KHZ, OD 1.1 ID 0.61, TRIAX CONNECTOR | 1 | |
| RDP1.1-.63/15K | Reflection Ring Probe 80Hz-50KHz, OD 1.14" ID 0.63" Height 1", | 1 | |
| RDP1.1-.65/100H | Reflection Ring Probe 100Hz-1KHz, OD1.1 ID 0.65 Height 1" | 1 | |
| RDP1.1-.65/200H | Reflection Ring Probe 1.0 ID .65 OD 200Hz-720Hz 0.80 -1.0" Height penetrate .290 AL | 1 | |
| RDP1.1-.65/500H-CFRP | Reflection Ring Probe OD 1.1, ID .655, 500Hz CFRP | 1 | |
| RDP1.1-.655/100H-CFRP | Reflection Ring Probe OD1.1 ID .655 100Hz CFRP | 1 | |
| RDP1.1-.655/500H-CFRP | Reflection Ring Probe OD 1.1, ID .655 500Hz CFRP | 1 | |
| RDP1.1-100H | Reflection Ring Probe, 50Hz-3KHz, .75" ID x 1.10" OD, Triax | 1 | |
| RDP1.1-500H-1Ti | Reflection Ring Probe, .64ID x 1.1OD, 500Hz-20KHz, Triax connector, Modified with SS case only | 1 | |
| RDP1.1-500H-Ti | Reflection Ring Probe, .64ID x 1.1OD, 500Hz-20KHz, Triax connector | 1 | |
| RDP1.1-50H-T | Reflection Ring Probe, .64 ID, 1.1 OD, 50-500Hz, Triax Connector | 1 | |
| RDP1.1/.6-500H CFRP | Reflection Ring Probe, OD 1.1 ID .6, 500Hz-20KHz, GOING THRU CFRP TO AL | 1 | |
| RDP1.1/.6-500HTI | Reflection Ring Probe, Ø.600 OD, 500Hz, , 1" Useable Height Working on Titanium. | 1 | |
| RDP1.1/.78-500H-TI:RDP1.3/.78-500HTI | Reflection Ring Probe, Ø.78" OD, 500Hz, , 1" Useable Height Working on Titanium | 1 | |
| RDP1.1/.85-100H | Reflection Ring Probe, 50-500 HZ, center freq 100H, REFL, tested on AL | 1 | |
| RDP1.15-.54/100H | Reflection Ring Probe, 1.15 OD, .54 ID, 100Hz-10KHz | 1 | |
| RDP1.2-.3/100H | Reflection Ring Probe 1.2 OD, .3 ID, 100Hz | 1 | |
| RDP1.2-.4/100H | Reflection Ring Probe 1.2 OD, .410 ID, 100Hz | 1 | |
| RDP1.2-.4/300H | Reflection Ring Probe, 1.2 OD, .410 ID, 300Hz | 1 | |
| RDP1.2-.53/100H | Reflection Ring Probe w/ Triax connector 1.2" OD .530" ID 100Hz to 400Hz | 1 | |
| RDP1.2-.6/500H | Reflection Ring Probe, 50Hz-3KHz, .6 ID similar to RDP1.2-100H-2 | 1 | |
| RDP1.2-.6/50H | Reflection Ring Probe, 50Hz-3KHz, .6 ID | 1 | |
| RDP1.2-.75/100H | Reflection Ring Probe, 1.2 OD, .75 ID, 100Hz | 1 | |
| RDP1.2-.77/300H | Reflection Ring Probe, 1.2 OD, .770 ID, 300Hz | 1 | |
| RDP1.2-100H | Reflection Ring Probe w/ Triax connector, Ø.74 MIN ID, 100Hz-1KHz | 1 | |
| RDP1.2-100H-7 | RING PROBE TECHNANDT 50HZ-1.5KHZ | 2 | |
| RDP1.2-100H-9 | Reflection Ring Probe, 1.2OD x .7ID x 1.25H, 100Hz-1KHz | 1 | |
| RDP1.2-50H | Reflection Ring Probe w/ Triax connector, Ø.74 MIN ID, 50-500Hz | 1 | |
| RDP1.2/.65-200K CFRP | Reflection Ring Probe, OD 1.2, ID.65, 1" Height 10-200KHz going through CFRP | 1 | |
| RDP1.25-.74/50H | Reflection Ring Probe, 1.25 OD, .74 ID, 50Hz | 1 | |
| RDP1.25-.75/300H | Reflection Ring Probe, outer diameter 1.25", Inner Diameter 0.75", Max Height 1.5" 300Hz-800Hz Center freq. 500Hz | 2 | |
| RDP1.25-.77/300H | Reflection Ring Probe OD 1.25 ID .77 300Hz-800Hz | 2 | |
| RDP1.25-.850/500H | Reflection Ring Probe OD 1.25 ID.850 Height 1.0" 100Hz-1KHz . | 1 | |
| RDP1.25-74/50H | LOW FREQUENCY REFLECTION RING PROBE .MICRO DOT PROBE CONNECTION AND LEMO12 PIN OR BNC MENTOR EM INSTRUMENT CONNECTION | 1 | |
| RDP1.3-.870/250H | Reflection Ring Probe, OD 1.30 ID .870, Height 1", go thru .300 thick, running at 250Hz | 1 | |
| RDP1.3-100H | Reflection Ring Probe, 1.3"OD x .325"ID x 1.0" High, 100Hz-1KHz, Triax | 1 | |
| RDP1.3-100H-5 | Reflection Ring Probe, 1.3"OD x .700"ID x 1.85" High, 50Hz-5KHz | 1 | |
| RDP1.3-200H-TI | Reflection Ring Probe, .75 ID x 1.3 OD, 200Hz-10KHz, for CFRP/Titanium | 1 | |
| RDP1.35-.85/500H | 500HREFLECTION RING PROBE OD 1.35 ID.850 HEIGHT 1.0" 100HZ-1KHZ, ALUM. REFLECTION | 1 | |
| RDP1.35-.850/500H | Reflection Ring Probe OD 1.35 ID.850 Height 1.0" 100Hz-1KHz | 2 | |
| RDP1.4-.8-100H | Reflection Ring Probe, 1.4 OD, .8 ID, 100Hz | 1 | |
| RDP1.4-.85-200H | REFLECTION RING PROBE, OUTER DIAMETER 1.40, INNER DIAMETER .85, MAX HEIGHT 1.75, CENTER FREQ 200HZ 100-500HZ | 1 | |
| RDP1.4-500H-3 | Reflection Ring Probe w/ Triax connector, ID=.780", OD=1.40", H=1.705", 50Hz-3KHz | 1 | |
| RDP1.40-.85-200H | Reflection Ring Probe, outer diameter 1.40, inner diameter .85, Max Height 1.75, center freq 200Hz 100-500Hz | 1 | |
| RDP1.45-.960/500H | Reflection Ring Probe, 1.45 OD, .960 ID, 1.0" Height, 100Hz-1KHz, .400 Thick AL No Radius | 1 | |
| RDP1.5-100H | Reflection Ring Probe, 1.5"OD x .385"ID x 1.0" High, 100Hz-1KHz, Triax | 1 | |
| RDP1.5-100H-3 | Reflection Ring Probe w/ Triax connector, .68ID x 1.5OD | 1 | |
| RDP1.5-500H-TI | Reflection Ring Probe w/ Triax connector, .80ID x 1.0H, 500H-20KHz, for titanium | 1 | |
| RDP1.57-1.07/500H | Reflection Ring Probe, 1.57 OD, 1.07 ID, Height 1.0", 100Hz-1 KHz, .450 Thick AL Radius .250 | 1 | |
| RDP1.6-100H-5 | Reflection Ring Probe w/ Triax connector 1.6 OD 1.0 ID 50Hz-5KHz | 1 | |
| RDP1.6-500H-TI | Reflection Ring Probe, 1.1ID x 1.6OD, Triax connector | 1 | |
| RDP1.95-960/500H | Reflection Ring Probe 1.95 OD .960 ID 500 Hz | 1 | |
| RDP15-10M-100H | Reflection Ring Probe, 100HZ-10KHZ, 10mm ID x 15mm OD | 1 | |
| RDP15-7M-100H | Reflection Ring Probe, 100HZ-10KHZ, 7mm ID x 15mm OD | 1 | |
| RDP15-9M-100H | Reflection Ring Probe, 100HZ-10KHZ, 9mm ID x 15mm OD | 1 | |
| RDP2.0-1.50/100H | Reflection Ring Probe, OD 2.0", ID 1.5", Height 1.7"-2.0", 50Hz-500Hz go thru .660 AL | 1 | |
| RDTA0-01-01 | DEBURRING TOOL (SIZES FROM 4 TO 6) | 1 | |
| RDTA0-01-02 | DEBURRING TOOL (SIZES FROM 8 TO 12) | 1 | |
| RDTA0-01-03 | DEBURRING TOOL (SIZES FROM 16 TO 24) | 1 | |
| RDTA0-01-03A | TOOL RYNGLOK DEBURRING | 1 | |
| RE6 | BEARING/GAS DIFFUSER | 3 | |
| REY201-1 | FERRAMENTA DE INSERÇÃO DE O RINGS NOS TUBOS DE COMBUSTIVEL | 1 | |
| RF06LPDE | LPDE REMOVAL TOOL LOCKRING LIFT TYPE | 2 | |
| RF170066 | WRENCH – FAN BLADES RING REMOVAL | 1 | |
| RF9808DEK | DRIVE TOOL - LOCKRING LIFT TYPE, ADAPTER | 1 | |
| RF9808DEK???? | LOCKRING DRIVE TOOL | 1 | |
| RF9808DEK | LOCKRING DRIVE TOOL | 1 | |
| RF9810DEK | LOCK RING DRIVE TOOL | 1 | |
| RF9810DEK?????? | LOCKRING DRIVE TOOL | 1 | |
| RF9810DEK | LOCKRING DRIVE TOOL | 1 | |
| RF9812DEK | DRIVE TOOL – LOCKRING | 1 | |
| RF9816DA | ROSAN LOCKRING DRIVE TOOL - OUTLET | 1 | |
| RF9816DEK | ROSAN LOCKRING DRIVE TOOL OUTLET ADAPTOR | 1 | |
| RFESCCFM7B3019 | FWD ARM RING | 1 | |
| RFKA9906DW | DRIVE TOOL – LOCKRING | 2 | |
| RGS-25 | 25 PIECE RADIUS GAGE MEASURING SET WITH STORAGE POUCH | 1 | |
| RH 60 B | SOLDERING STATION | 1 | |
| RH450B | SOLDERING KIT | 1 | |
| RH60B | SOLDERING STATION | 1 | |
| RHCK1000 | HOSE, CFM56-5A/5B ENGINE LOAD TEST BEARING HALF COUPLER | 2 | |
| RIG35155 | DEBURRING TOOL | 1 | |
| RIG41162 | 37 DEG FLARING TOOL MODEL 377 | 1 | |
| RIG41285 | 37 DEG FLARING TOOL MODEL 375 | 1 | |
| RJ-032 | CARGO DOOR SPRING TOOLS (146/RJ) | 1 | |
| RKC4101-12-RCT | SOLID CARBIDE BEARING REPLACEMENT CUTTER | 1 | |
| RKC4101-12D | DRIVER, ENGINE BEARING REMOVAL/INSTALLATION | 1 | |
| RKC4101-14DP | DRILL PRESS CUTTING TOOL FOR BEARING MS14101-14 | 1 | |
| RKC4101-6 | CUTTER, STAKED BEARING | 3 | |
| RKC4103-12 | BEARING CUTTER, A320, RUDDER, | 2 | |
| RKC7006 | REXNORD BEARING TOOL | 1 | |
| RKC7135-RCT | SOLID CARBIDE BEARING REPLACEMENT CUTTER | 1 | |
| RKC7470-RCT | SOLID CARBIDE BEARING REPLACEMENT CUTTER | 1 | |
| RKD4101-12D | DRIVER, ENGINE BEARING REMOVAL/INSTALLATION | 1 | |
| RKD4101-4D | BEARING INSTALLATION TOOL – DRIVER | 1 | |
| RKD4101-6D | BEARING INSTALLATION TOOL – DRIVER | 1 | |
| RKD5070D | DRIVER, ENGINE BEARING REMOVAL/INSTALLATION | 1 | |
| RMSE-2QE | JBC REPAIR STATION, SOLDERING, SOLDERING VACUUM, HOT AIR BLOWING STATION | 1 | |
| RO25-039 | DOUBLE ROW BEARING | 1 | |
| RO25-070 | LOCK RING STD ORBIT BLACK | 1 | |
| RO25-071 | LOCK RING FINE ORBIT RED | 1 | |
| ROC472081 | ROD BEARING ALIGNMENT TOOL | 1 | |
| ROC476000 | CONN ROD BEARING INSTALLN TOOL | 1 | |
| RPD1.0/.5-200H | LOW FREQUENCY REFLECTION RING PROBE .500"Ø ID X 1.0"Ø OD 200HZ-3KHZ WITH A TRIAX FISCHER CONNECTOR. 737 PART 6 57-10-60, PG.2 USED WITH NDT3157. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| RPM3000-FULL-BNC | RPM3000-FULL-BNC;RPM3000BNC with Full Mactrak Capabilities Including Mactrak Performance Monitoring | 1 | |
| RPM3000-FULL-F | RPM3000-FULL-F;RPM3000F with Full Mactrak Capabilities Including Mactrak Performance Monitoring | 1 | |
| RPM3000MCMON-UPG | RPM3000MCMON-UPG;RPM3000 MACTRAK PERFORMANCE MONITORING OPTION FIELD UPGRADE | 1 | |
| RPTK1004 | BEARING, LOAD TEST INDICATOR | 2 | |
| RR0110-1/TF | RING PROBE INER DIAM 13mm +/-1.3 mm | 1 | |
| RR0110-5 | REFLECTION RING PROBE W/ TRIAX CONNECTOR, .5" ID X 1.0" OD, 50HZ-3KHZ | 1 | |
| RR0110-5-4L | RING DONUT PROBES | 1 | |
| RR0110-5/TF | LOW FREQUENCY REFLECTION RING PROBE .5"DIAM 1"DIAM | 1 | |
| RR0110.5-TF | LOW FREQUENCY REFLECTION RING PROBE 500 HZ-3KHZ, 1,0¿ DIA. OD; 0,500¿ DIA. ID. WITH TRIAX FISCHER CONNECTOR. ITEM ARP-1.0-100 H-5, EQUIVALENT P/N RR0110.5-TF. | 1 | |
| RR0112-5/TF | REFLECTION RING PROBE 50HZ-3KHZ .605 ID, TRIAX FISCHER CONNECTOR | 1 | |
| RR0112-5/TF50HZ-3KHZ | REFLECTION RING PROBE 50HZ-3KHZ .605 ID, TRIAX FISCHER CONNECTOR | 1 | |
| RR017‐5/4F | RING PROBE, SURFACE, REFLECTION, ID: 0.35 IN, 80 HZ TO 4 KHZ, 4‐PIN FISCHER CONNECTOR | 1 | |
| RR019-5/TF | REFLECTION RING PROBE, .45" ID X .9" OD, 50HZ-5KHZ, TRIAX CONNECTOR | 1 | |
| RR019-5TF | RING (ENCIRCLING) PROBE (REFLECTION TYPE) - CAPABLE OF OPERATING AT 100 HZ, WITH THE FOLLOWING DIMENSIONS: OD = 0.9 INCH (2.28 CM) ID = 0.45 INCH (1.14 CM). | 1 | |
| RR057-5 | DRIVER-PICK-UP RING PROBE | 1 | |
| RR058-1 | REFLECTION RING PROBE .81 OD, .30 ID W/ 2-PIN MICRODOT CONNECTOR, 200HZ-10KHZ | 1 | |
| RR1006-5 | RING PROBE, NDT | 1 | |
| RR206-5 | RING DONUT PROBES REFLECTION ABSOLUTE 500 HZ - 20 KHZ 6.35 MM (0.25 IN.) 15.24 MM (0.6 IN.) TRIAX FI | 1 | |
| RR206-5/TF | RING DONUT PROBES REFLECTION ABSOLUTE 500 HZ - 20 KHZ 6.35 MM (0.25 IN.) 15.24 MM (0.6 IN.) TRIAX FISCHER RR206-5-TF | 1 | |
| RR206-5TF | RING DONUT PROBES REFLECTION ABSOLUTE 500 HZ - 20 | 1 | |
| RR207-1 | RING DONUT PROBE, 500 HZ TO 20 KHZ FREQUENCY, REFLECTION ABSOLUTE, SHIELDED, 0.335 IN (8.51 MM) INTERNAL DIAMETER AND 0.600 IN (15.24 MM) EXTERNAL DIAMETER (OLYMPUS NDT OR EQUIVALENT) | 1 | |
| RR207-5TF | REFLECTION RING PROBE, .7" OD, .350"ID, 500HZ-20KHZ, TRIAX CONNECTOR | 1 | |
| RR5H8-2E8693 | BEARING ROD END | 1 | |
| RRO112-5/TF.50HZ-3KHZ OLYMPUS NDT | LOW FREQUENCY REFLECTION RING PROBE MICRO DOT PROBE CONNECTION AND LEMO 12PIN OR BNC MENTOR EM INSTRUMENT CONNECTION | 1 | |
| RRT025633 | ADAPTOR RING (FRONT) (IP ROTOR) | 1 | |
| RRT025661 | ADAPTOR RING (REAR) (IP ROTOR) | 1 | |
| RRT025819 | COVER - DUST COVER FOR USE DURING IP COMPRESSOR MODULE BUILD. | 1 | |
| RRT025820 | CASE LOCATION RING (LOCATE HP COMP. CASING ON MODULE 4 BUILD STAND) | 1 | |
| RRT025822 | GUIDE RING | 1 | |
| RRT027013 | BLADING RING | 1 | |
| RRT027014 | BLADING RING | 1 | |
| RRT027187 | IC BLADE RETAINING RING GAUGE | 1 | |
| RRT027427 | LP DEARING SUPPORT RING | 1 | |
| RRT027608 | RING PULL DOWN | 1 | |
| RRT027631 | RING DUMMY ANTI-SCORE | 1 | |
| RRT027683 | DISTANCE RING | 1 | |
| RRT027684 | GUIDE RING | 1 | |
| RRT027777 | ROUND UP RING | 1 | |
| RRT028107 | CLAMP RING - LOAD COVERPLATE TO THE HP TURBINE DISC | 1 | |
| RRT028135 | SPANNER - RUN DOWN OR OFF HP TURBINE TO HP ROTOR NUTS DURING BUILD | 1 | |
| RRT028313 | BEARING SUPPORT STAND | 1 | |
| RRT028470 | CLAMP RING - LOAD HP TURBINE SEAL PLATE DURING BUILD. | 1 | |
| RRT028712 | HANDLING RING | 1 | |
| RRT028717 | GAUGE - DETERMINE THE CORRECT POSITION OF THE RIM COVERPLATE RETAINING RING | 1 | |
| RRT029022 | BOLT - LOAD COVER PLATE / SEAL PLATE DURING BUILD | 1 | |
| RRT029432 | ADAPTOR RING (REAR) | 1 | |
| RRT029434 | ADAPTOR RING (REAR) | 1 | |
| RRT029656 | MEASURING BRIDGE | 1 | |
| RRT029657 | ROUND UP RING | 1 | |
| RRT029947 | ADAPTOR RING | 1 | |
| RRT030577 | ADAPTOR RING | 1 | |
| RRT030579 | GUIDE RING | 1 | |
| RRT030944 | BLADE RING | 1 | |
| RRT050462 | BLADE RING | 1 | |
| RRT051082 | CLAMP RING - HOLD ANTI-SCORE PLATES IN POSITION ON STG 1-3 HP DISC | 1 | |
| RRT051205 | LOADING TOOL - RETAIN RIM COVERPLATE LOCKING RING | 1 | |
| RRT052797 | BRACKET - SUPPORT FUEL MANIFOLD ASSEMBLY DURING BUILD/MAITENANCE | 1 | |
| RRT059715 | DISPERSION RING - TO EVENLY DISPERSE LIQUID NITROGEN AROUND HP TURBINE | 1 | |
| RRT068175 | BLADE RING | 1 | |
| RRT068175-1 | Blade Ring | 1 | |
| RRT070948 | PROTECT TRUSTLINK DURING PRECOOLER RI | 4 | |
| RRT073348 | CORE FAIRING ADAPTOR | 1 | |
| RRT073348-3 | CORE FAIRING ADAPTOR | 1 | |
| RRT081963 | DIST RING | 1 | |
| RRT082425 | ADPT RING | 1 | |
| RRT092937 | BLADING RING | 1 | |
| RRT096673 | Adapter Ring | 1 | |
| RRT098404 | IPT BLADING RING | 1 | |
| RRT101115-2 | PLASTIC PROTECTION PIECE FOR THE REAR PART DURING AIRCRAFT TURBOJET REPAIR. | 2 | |
| RRT104695 | ADPT RING | 1 | |
| RRT106070 | ADPT RING | 1 | |
| RRT106071 | ADAPTOR RING | 1 | |
| RRT106092 | Balance Bearing Housing Tool- RR has to supply bearings 2 off required | 1 | |
| RRT109741 | CORE FAIRING ADAPTOR | 1 | |
| RRT109747 | CORE FAIRING ADAPTOR | 1 | |
| RRT111513 | PULL DOWN RING | 1 | |
| RRT7008 | BEARING R/I, A320, RUDDER | 2 | |
| RSE1039 | MEASURING TOOL - LOAD | 2 | |
| RSE1136 | BLOCK DOOR MEASURING TOOL | 4 | |
| RSE1149 | STAKING TOOL FWD ENG MOUNT BEARING | 1 | |
| RSE1149 REV NC | STAKING TOOL FWD ENG MOUNT BEARING | 1 | |
| RSE1150 | TESTING TOOL FWD ENG MOUNT BEARING | 1 | |
| RSE1150 REV NC | TESTING TOOL FWD ENG MOUNT BEARING | 1 | |
| RSE3462 | MODIFIED RING SPANNER 4-Mar IN. | 3 | |
| RSE3462 REV A | MODIFIED RING SPANNER 3/4 IN. | 1 | |
| RSEA220PW1524G-DCPT-TD | POSITION MEASURING AID (COLLINS) | 1 | |
| RSIK1 | KIT SAFETY-RAT,INTERFACE THIS TOOL IS USED TO PROTECT THE RAT DURING TEST IN CASE OF RAT-TEST- MOTOR FAILURE (LEACKAGE OF THE DRIVE SHAFT SEAL). | 10 | |
| RST1015 | DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14103-12 OR EN4265AN12 | 2 | |
| RST1017 | DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14101-14 | 2 | |
| RST2008 | STEERING CYLINDER SIVAGING TOOL IPL1-490 | 1 | |
| RST2128 | STAKING TOOL – DRIVE LINK BEARING | 2 | |
| RST2153 | DRILL PRESS (BEARING TRI-ROLLER SWAGING TOOL) | 2 | |
| RST2167 | ROLLER BEARING SWAGGING TOOL DRILL PRESS | 2 | |
| RST2448 | BEARING SWAGING TOOL P/N RST2448 REXNORD CORP PORTABLE SUPPLIER ITEM NO: RST2448 | 2 | |
| RST2497 | PORTABLE TRI-ROLLER SWAGING TOOL EQUIVALENT TO RST2497 SUITED FOR BEARING BACB10FA09G | 2 | |
| RST2512 | Drill Press Bearing Swaging Tool | 2 | |
| RST2523 | Drill Press Bearing Swaging Tool | 1 | |
| RST2544 | STEERING CYLINDER SIVAGING TOOL IPL1-490 | 1 | |
| RST2655 | REXNORD BEARING TOOL | 1 | |
| RST2961 | DRILL-PRESS TRI ROLLER SWAGING TOOL FOR BEARING M81936/1-22R | 1 | |
| RST4187 | BEARING SWAGER, A320, RUDDER, | 2 | |
| RST4329 | BEARING SWAGER USED ON SPOILERS SHAFER/REXNORD 77896-RST4329 | 1 | |
| RST4330 | BEARING SWAGER USED ON AILERONS SHAFER/REXNORD 77896-RST4330 | 1 | |
| RT210/2/85003 | RELEASE TOOL FOR SOK SPRING BAND CLAMPS | 1 | |
| RT21002085006 | RELEASE TOOL FOR SOK SPRING BAND CLAMPS | 1 | |
| RTB607 | T-HANDLE RING RATCHET SET (SNAP ON) | 4 | |
| RTRK0-01-001 | CUTTING AND DEBURRING TOOLS | 1 | |
| RWT45-0013-00 | ANTENNA INSTALLATION TOOL / ADAPTER RING ALIGNEMENT AID | 1 | |
| RX711AS | SOLDERING STATION | 2 | |
| S-17-1 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 1, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-2 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 2, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-3 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 3, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-4 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 4, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-5 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 5, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-6 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 6, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-7 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 7, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-17-8 | BOEING CUSTOM NDI TEST REFERENCE STANDARD ASSEMBLY DASH NO. 8, MATERIAL 2024-T3, STRINGER=7075-T6 | 1 | |
| S-4933959-521 | LOCK - CIRCUIT BREAKER, WITH TAG "REMOVE BEFORE FLIGHT" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 LOCK. (PACO PLASTICS & ENGINEERING INC) | 13 | |
| S-4933959-531 | LOCK - CIRCUIT BREAKER, WITH TAG "INOPERATIVE - DO NOT OPERATE" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 C (PACO PLASTICS & ENGINEERING INC) | 11 | |
| S-643-1 | Round Weldless Ring | 1 | |
| S-PC-P14 | S-PC-P14 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 1 | |
| S-PC-P16 | S-PC-P16 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 1 | |
| S101D12 | ROSAN LOCKRING DRIVE TOOL, 1/4 ID | 2 | |
| S111D12 | LOCKRING DRIVER | 2 | |
| S121D12 | DRIVE TOOL, LOCK RING | 2 | |
| S121D32 | LOCK RING DRIVE TOOL FOR STUD | 1 | |
| S2100100101A | LED RING - PCBA ASSEMBLY | 1 | |
| S3200008201 | RING DAMPENING | 1 | |
| S34549-216-4-5J | SLYDRING | 1 | |
| S43580 | MEASURING AID | 1 | |
| S462555 | TORQUE SPRING QD2R75A | 1 | |
| S47032 | SPRING REMOVAL AND INSTALLATION TOOL | 2 | |
| S47199 | SPECIALWRENCHFORTHETHREADEDRINGINSTALLATION | 1 | |
| S48343 | DUMMY THREADED RING | 1 | |
| S48344 | DUMMY THREADED RING | 1 | |
| S48354 | SPECIAL WRENCH FOR THE THREADED RING REMOVAL | 1 | |
| S48515 | RING HAMMERED | 4 | |
| S487ETT2 | TRAILER, ENGINE GROUND HANDLING - SINGLE STEERING | 1 | |
| S4933959 | RED "REMOVE BEFORE FLIGHT" TAG CIRCUIT BREAKER LOCKOUT RING | 1 | |
| S4933959-501 | Tag. Circuit Breaker (Red Ring) | 19 | |
| S4933959-521 | RED "REMOVE BEFORE FLIGHT" TAG CIRCUIT BREAKER LOCKOUT RING | 13 | |
| S4933959-529 | CIRCUIT BREAKER LOCKOUT RING AND TAG (NATURAL) | 1 | |
| S4933959-531 | LOCK - CIRCUIT BREAKER, WITH TAG "INOPERATIVE - DO NOT OPERATE" (MINIMUM ORDER OF $150 REQUIRED). REPLACES B27065-12 C (PACO PLASTICS & ENGINEERING INC) | 11 | |
| S5008739-F300 | Seal Wear Ring Driver | 1 | |
| S5009950-F100 | Seal Wear Ring Driver | 1 | |
| S643-1 | FWD RED RING | 1 | |
| S7817250 | SOLDERING | 1 | |
| S91D10 | DRIVE TOOL, LOCK RING | 3 | |
| SA30032 | BEARING ALIGNMENT MANDREL | 2 | |
| SA30056 | BEARING ALIGNMENT MANDREL | 2 | |
| SA30103 | MANDREL, BEARING ALIGNMENT | 1 | |
| SAL13 | MANDREL, BEARING ALIGNMENT & GAP GAUGE | 1 | |
| SAM20218 | Bearing alignment mandrel and gap gage | 1 | |
| SAM20218 PM | BEARING AND GAP GAGE | 1 | |
| SAM20238 | Bearing alignement mandrel and gap gage | 4 | |
| SAM20238PM | BEARING ALIGNEMENT MANDREL AND GAP GAGE | 1 | |
| SAM20239 | BEARING ALIGNMENT MANDREL AND GAP GAGE | 2 | |
| SAM20267 | BEARING ALIGNEMENT MANDREL AND GAP GAGE | 1 | |
| SAT-1391-001 | SPRING PULLER FAIRCHILD/METROLINER | 1 | |
| SB4-2 | SPRING DZUS | 3 | |
| SBA320-34-1263 | PITOT PROBE DEBURRING KIT TOOL | 1 | |
| SBA320-78-0209 | AFT CASCADE RING/CLEVICE TOOL | 1 | |
| SBC16195A-34-002 | MAGNETIC DEBURRING TOOL | 1 | |
| SBMD11-27-047 | SPRING EXPANDER | 1 | |
| SBX605 | S-SHAPED RING SPANNER SET | 2 | |
| SC402 | INSERTER,BEARING AND BUSHING;| | 1 | |
| SC90201 | SNAP RING PLIERS .038 X 18 DEG | 1 | |
| SC90202 | SNAP RING PLIERS .070 X 18 DEG | 1 | |
| SC90204 | SNAP RING PLIERS .070 X 90 DEG | 1 | |
| SCALE - SPRING, 0-100 LBS, TENSION STD-1184 | SCALE - SPRING, 0-100 LBS, TENSION STD-1184 | 1 | |
| SD5000 | DIGITAL SPRING TESTER | 1 | |
| SDL11 | RECHARGEABLE SOLDERING IRON KIT 30W | 1 | |
| SDR-84 | RAPID REVERSE SPRING | 1 | |
| SETNLKO12-03 | TANG STEEKRING SCHROEVENDR SET | 1 | |
| SF5902-3D | LOCK RING DRIVE TOOL | 1 | |
| SF5902-4D | Ring Driver | 2 | |
| SG 350A90-06 | TRDS BEARING EXTRACTOR | 1 | |
| SG 350A93-3410-00 | DRIVE SHAFT BEARING FITTING THIMBLE | 1 | |
| SG350A93-0033 | SPRING ANTIVIBRATOR STAND SET | 1 | |
| SG350A93-3714-00 | ADJUSTING SPHERICAL BEARING1 | 1 | |
| SGDMRC41RJ | RED END CAP WITHOUT O-RING | 1 | |
| SGDMRC41RJG | GREEN END CAP WITHOURT O-RING | 1 | |
| SGDMRC41RJO | ORANGE END CAP WITHOUT O-RING | 1 | |
| SGK-01 | SOLDERING GUN KIT | 1 | |
| SH-39 | RETAINING RING DIA 10mm | 1 | |
| SH-75 | RETAINING RING EXT 3/4 DIA | 1 | |
| SI012 | 12W CORDLESS SOLDERING IRON | 1 | |
| SI12C | ROD END BEARING | 1 | |
| SID-CONTOURING | Spherical Inside Diameter Contouring option | 1 | |
| SIRB90-10 | ADAPTOR RING MED | 1 | |
| SIRB90-11 | ADAPTOR RING LG | 1 | |
| SIRB90-15C | ADPT RING 89 99MM BEARINGS | 1 | |
| SIRB90-9 | ADAPTOR RING SM | 1 | |
| SIRHMB90-M | MERCEDES WHL BEARING HUB KIT | 1 | |
| SIRHMB90-P | PORSCHE WHL BEARING AND HUBKIT | 1 | |
| SIRHMB90-VA | VW AUDI WHL BEARING HUB KIT | 1 | |
| SIRON 936 | SOLDERING STATION | 1 | |
| SK VB1152 | NOSE GEAR DOWNSPRING DISASSEMBLY/REASSEMBLY TOOL | 1 | |
| SK VB1153 | NOSE GEAR DOWNSPRING REMOVE/INSTALL TOOL | 1 | |
| SKF TMIC 7-28 | BEARING PULLER KIT/BEARING EXTRACTOR (DRIVE SIDE) | 1 | |
| SL-20 | SOLDERING STATION | 1 | |
| SL90-315-3750 | NOTCHED WRENCHED - R/I BEARING RETAINING NUTS NSA5454 | 18 | |
| SLH-V260-SM | SPRING LOADED TRASDUCER HOLDER. FITS V260-SM SONOPEN | 1 | |
| SM111D12 | DRIVE TOOL, LOCK RING | 1 | |
| SM121D12 | DRIVE TOOL, LOCK RING | 1 | |
| SMD85-584000 | SCRAPER BEARING 4IN SOLID 12PK | 1 | |
| SMT-A-IPR-KIT-MS14101-9 | THIS IS AN ARBOR PRESS INSTALLATION, PROOF-LOAD, REMOVAL TOOL FOR BEARING MS14101-9 | 1 | |
| SMT-P-IPR-KIT-MS14101-9 | HIS IS A PORTABLE INSTALLATION, PROOF-LOAD, REMOVAL TOOL FOR BEARING MS14101-9 | 1 | |
| SMT-RST-.970-312 | HIS IS A DRILL PRESS TRI-ROLLER SWAGING TOOL FOR BEARING MS14101-9 | 1 | |
| SN90201 | SNAP RING PLIERS .038 X 18 DEG | 1 | |
| SN90202 | SNAP RING PLIERS .070 X 18 DEG | 1 | |
| SN90203 | SNAP RING PLIERS .038 X 90 DEG | 1 | |
| SN90204 | SNAP RING PLIERS .070 X 90 DEG | 1 | |
| SNF221764 | QUAD RING | 1 | |
| SNF221772 | QUAD RING | 1 | |
| SNF223194 | SPRING AND RUBBER CUSHION | 1 | |
| SNF224764 | QUAD RING | 1 | |
| SNFG10000015 | RETURN SPRING PEDAL | 1 | |
| SNG 375-3L | .375" X 3" LONG, SPRING LOADED TIP SURFACE PROBE, 20KHZ, BRIDGED, TRIAX CONNECTOR | 1 | |
| SNI SRES 24 | RING ADAPTOR 3/4 (ADOPTER TORQUE WRENCH 3/4 WR S2) | 1 | |
| SNI SRES 28 | RING ADAPTOR 7/8 ( ADOPTER TORQUE WRENCH 7/8 HEX) | 1 | |
| SOD-CONTOURING | Spherical Outside Diameter Contouring option | 1 | |
| SODC1 | SOLDERING CLAMP | 1 | |
| SODC1BLK | SOLDERING CLAMP BLACK | 1 | |
| SODC1GRN | SOLDERING CLAMP GREEN | 1 | |
| SODC1ORG | SOLDERING CLAMP ORANGE | 1 | |
| SOFT‑00727–SCA | SACHEON AEROSPASE MANUFACTURING IND. CO | 1 | |
| SOLDERING IRON | SOLDERING KIT | 1 | |
| SP-1K | Portasol SOLDERING-IRON | 1 | |
| SP1/2X3-SBO | SPRING PIN 1/2 X 3 STEEL BLACK OXIDE | 1 | |
| SP1/4X3-SZ | SPRING PIN 1/4 X 3 STEEL ZINC PLATED | 1 | |
| SP1/8X1"-SZ | SPRING PIN 1/8 X 1" ZINC PLATED | 1 | |
| SP1/8X9/16-S | SPRING PIN 1/8 X 9/16 STEEL BLACK OXIDE | 1 | |
| SP25NEU | SOLDERING GUN | 1 | |
| SP25NKEU | SOLDERING IRON | 1 | |
| SP3/16X15/8 | SPRING PIN 3/16 DIA. X 1 5/8 LG | 1 | |
| SP3/32X3/8SS | SPRING PIN 3/32DIA. X 3/8LG ST. STEEL | 1 | |
| SP3/8X7/8-SS | SPRING PIN 3/8 X 7/8 S.S MADE FROM 1"LG | 1 | |
| SP5/16X1"3/4-SBO | SPRING PIN 5/16 X 1"3/4 STEEL BLACK OXIDE | 1 | |
| SP5/32X5/8-SZ | SPRING PIN 5/32 X 5/8 STEEL ZINC PLATED | 1 | |
| SP510091 | FIXED RING - OPTIONAL | 1 | |
| SP510189 | FIXED RING | 1 | |
| SP510314 | COILED SPRING PIN 3MMX8MM | 1 | |
| SP510380 | COILED SPRING PIN | 1 | |
| SP510381 | COILED SPRING PIN 6.35X38.1L | 1 | |
| SP53258 | VALVE BODY O-RING ASSY | 1 | |
| SP53300B | SCREW LOCKING AND O RING ASSY | 1 | |
| SP66561 | NEEDLE BEARING | 1 | |
| SPD.125-200K | Spring Loaded Probe, .125" Diameter, 50-500KHz, Triax | 1 | |
| SPD.125-500K | Spring Loaded Probe, .125" Diameter, 200KHz-1MHz, Triax Connector | 1 | |
| SPD.25-200K | Spring Loaded Probe, .250" Diameter, 50-500KHz, Triax | 1 | |
| SPD.25-20K | .250" Spring Loaded Tip Surface Probe, 20-100KHz, Triax Connector | 1 | |
| SPD.307-200K-Z | Spring Loaded Probe, .307" Diameter, 50-500KHz, Hard wire 6ft to 4-Pin Cannon | 1 | |
| SPD.375-10K | .375" Spring Loaded Tip Surface Probe, 10KHz, Triax Connector | 1 | |
| SPD.375-20K | .375" x 3" Long, Spring Loaded Tip Surface Probe, 20KHz, Triax Connector | 1 | |
| SPD.375-25K | .375" x 3" Long, Spring Loaded Tip Surface Probe, 10-50KHz, Triax Connector | 1 | |
| SPD.375-25K-2M | .375" x 3" Long, Spring Loaded Tip Surface Probe, 10-50KHz, 2 Pin Microdot | 1 | |
| SPD.375-25K-4F | .375" x 3" Long, Spring Loaded Tip Surface Probe, 10-50KHz, 4pin Fischer | 1 | |
| SPD.375-2K | .375" Spring Loaded Tip Surface Probe, 1-5KHz, Triax Connector | 1 | |
| SPD.375-2K-2M | .375" Spring Loaded Tip Surface Probe, 1-5KHz, 2 Pin Microdot | 1 | |
| SPD.375-5K | .375" Spring Loaded Tip Surface Probe, 5-10KHz, Triax Connector | 1 | |
| SPD.375-5K-2M | .375" Spring Loaded Tip Surface Probe, 5-10KHz, 2 Pin Microdot | 1 | |
| SPHDSET4 | HD SPRING PUNCH SET | 1 | |
| SPL-10805 | PROTECTIVE RING - WING, LOWER PANEL ACCESS DOOR | 1 | |
| SPL-11076 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 1 | |
| SPL-11890 | PLUG SET - NOSE WHEEL STEERING CYLINDER | 1 | |
| SPL-12396 | ROD END BEARING SOCKET WRENCH | 1 | |
| SPL-12584 | ROD END BEARING SOCKET WRENCH | 1 | |
| SPL-14685 | PINS GUIDE - NO. 5 BEARING OUTER RACE INSTALLATION | 1 | |
| SPL-4360 | WRENCH - MAIN LANDING GEAR TRUNNION SPHERICAL BEARING | 1 | |
| SPL-5447 | Bearing Width Measurement Equipment | 1 | |
| SPL-8543 | Spring Holder | 1 | |
| SPL-9704 | LUBRICATION SET - ENTRY, CARGO, SERVICE, AND GALLEY DOOR CAMSHAFT BEARINGS | 1 | |
| SPL-9827 | SPRING EXPANDER SET | 1 | |
| SPL-9872 | CHECK LEAD - WIRING HARNESS | 1 | |
| SPL-9873 | CHECK LEAD - WIRING HARNESS | 1 | |
| SPM10X36-SZ | SLOTTED SPRING PIN | 1 | |
| SPM2.5X12-S | SPRING PIN M2.5X12-ST (DIN 1418) | 1 | |
| SPM2.5X20 | SPRING PIN DIA.2.5 X 20LG | 1 | |
| SPM2.5X24-S | SPRING PIN M2.5X24 ST (DIN1481) | 1 | |
| SPM2X16-SBO | SPRING PIN M2 X 16 BLACK OXIDE | 1 | |
| SPM5X50-S | SPRING PIN 5 DIA. X 50 LG STEEL | 1 | |
| SPR.25-100K | .250" Spring Loaded Tip Surface Probe, 25-200KHz, Triax Connector, Reflection | 1 | |
| SPR.34-20K | .340" Diameter, Spring Loaded Tip Surface Probe, 10-50KHz, Reflection, Triax Connector | 1 | |
| SPR.4-20K | .400" Diameter, Spring Loaded Tip Surface Probe, 10-50KHz, Reflection, Triax Connector | 1 | |
| SPR101N | Bowers SPR101N SmartPlug Ring Gauge (Grade Nominal) 101.85 - 120.90mm | 1 | |
| SPR101X | Bowers SPR101X SmartPlug Ring Gauge (Grade X) 101.85 - 120.90mm | 1 | |
| SPR101XX | Bowers SPR101XX SmartPlug Ring Gauge (Grade XX) 101.85 - 120.90mm | 1 | |
| SPR120N | Bowers SPR120N SmartPlug Ring Gauge (Grade Nominal) 120.90 - 139.95mm | 1 | |
| SPR120X | Bowers SPR120X SmartPlug Ring Gauge (Grade X) 120.90 - 139.95mm | 1 | |
| SPR120XX | Bowers SPR120XX SmartPlug Ring Gauge (Grade XX) 120.90 - 139.95mm | 1 | |
| SPR12N | Bowers SPR12N SmartPlug Ring Gauge (Grade Nominal) 12.95 - 20.96mm | 1 | |
| SPR12X | Bowers SPR12X SmartPlug Ring Gauge (Grade X) 12.95 - 20.96mm | 1 | |
| SPR12XX | Bowers SPR12XX SmartPlug Ring Gauge (Grade XX) 12.95 - 20.96mm | 1 | |
| SPR139N | Bowers SPR139N SmartPlug Ring Gauge (Grade Nominal) 139.95 - 159.00mm | 1 | |
| SPR139X | Bowers SPR139X SmartPlug Ring Gauge (Grade X) 139.95 - 159.00mm | 1 | |
| SPR139XX | Bowers SPR139XX SmartPlug Ring Gauge (Grade XX) 139.95 - 159.00mm | 1 | |
| SPR159N | Bowers SPR159N SmartPlug Ring Gauge (Grade Nominal) 159.00 - 178.05mm | 1 | |
| SPR159X | Bowers SPR159X SmartPlug Ring Gauge (Grade X) 159.00 - 178.05mm | 1 | |
| SPR159XX | Bowers SPR159XX SmartPlug Ring Gauge (Grade XX) 159.00 - 178.05mm | 1 | |
| SPR178N | Bowers SPR178N SmartPlug Ring Gauge (Grade Nominal) 178.05 - 197.10mm | 1 | |
| SPR178X | Bowers SPR178X SmartPlug Ring Gauge (Grade X) 178.05 - 197.10mm | 1 | |
| SPR178XX | Bowers SPR178XX SmartPlug Ring Gauge (Grade XX) 178.05 - 197.10mm | 1 | |
| SPR197N | Bowers SPR197N SmartPlug Ring Gauge (Grade Nominal) 197.10 - 200mm | 1 | |
| SPR197X | Bowers SPR197X SmartPlug Ring Gauge (Grade X) 197.10 - 200mm | 1 | |
| SPR197XX | Bowers SPR197XX SmartPlug Ring Gauge (Grade XX) 197.10 - 200mm | 1 | |
| SPR1N | Bowers SPR1N SmartPlug Ring Gauge (Grade Nominal) 1.5 - 3mm | 1 | |
| SPR1X | Bowers SPR1X SmartPlug Ring Gauge (Grade X) 1.5 - 3mm | 1 | |
| SPR1XX | Bowers SPR1XX SmartPlug Ring Gauge (Grade XX) 1.5 - 3mm | 1 | |
| SPR20N | Bowers SPR20N SmartPlug Ring Gauge (Grade Nominal) 20.96 - 28.83mm | 1 | |
| SPR20X | Bowers SPR20X SmartPlug Ring Gauge (Grade X) 20.96 - 28.83mm | 1 | |
| SPR20XX | Bowers SPR20XX SmartPlug Ring Gauge (Grade XX) 20.96 - 28.83mm | 1 | |
| SPR28N | Bowers SPR28N SmartPlug Ring Gauge (Grade Nominal) 28.83 - 38.35mm | 1 | |
| SPR28X | Bowers SPR28X SmartPlug Ring Gauge (Grade X) 28.83 - 38.35mm | 1 | |
| SPR28XX | Bowers SPR28XX SmartPlug Ring Gauge (Grade XX) 28.83 - 38.35mm | 1 | |
| SPR38N | Bowers SPR38N SmartPlug Ring Gauge (Grade Nominal) 38.35 - 51.05mm | 1 | |
| SPR38X | Bowers SPR38X SmartPlug Ring Gauge (Grade X) 38.35 - 51.05mm | 1 | |
| SPR38XX | Bowers SPR38XX SmartPlug Ring Gauge (Grade XX) 38.35 - 51.05mm | 1 | |
| SPR3N | Bowers SPR3N SmartPlug Ring Gauge (Grade Nominal) 3 - 6.1mm | 1 | |
| SPR3X | Bowers SPR3X SmartPlug Ring Gauge (Grade X) 3 - 6.1mm | 1 | |
| SPR3XX | Bowers SPR3XX SmartPlug Ring Gauge (Grade XX) 3 - 6.1mm | 1 | |
| SPR51N | Bowers SPR51N SmartPlug Ring Gauge (Grade Nominal) 51.05 - 63.75mm | 1 | |
| SPR51X | Bowers SPR51X SmartPlug Ring Gauge (Grade X) 51.05 - 63.75mm | 1 | |
| SPR51XX | Bowers SPR51XX SmartPlug Ring Gauge (Grade XX) 51.05 - 63.75mm | 1 | |
| SPR63N | Bowers SPR63N SmartPlug Ring Gauge (Grade Nominal) 63.75 - 76.45mm | 1 | |
| SPR63X | Bowers SPR63X SmartPlug Ring Gauge (Grade X) 63.75 - 76.45mm | 1 | |
| SPR63XX | Bowers SPR63XX SmartPlug Ring Gauge (Grade XX) 63.75 - 76.45mm | 1 | |
| SPR6N | Bowers SPR6N SmartPlug Ring Gauge (Grade Nominal) 6.1 - 9.27mm | 1 | |
| SPR6X | Bowers SPR6X SmartPlug Ring Gauge (Grade X) 6.1 - 9.27mm | 1 | |
| SPR6XX | Bowers SPR6XX SmartPlug Ring Gauge (Grade XX) 6.1 - 9.27mm | 1 | |
| SPR76N | Bowers SPR76N SmartPlug Ring Gauge (Grade Nominal) 76.45 - 89.15mm | 1 | |
| SPR76X | Bowers SPR76X SmartPlug Ring Gauge (Grade X) 76.45 - 89.15mm | 1 | |
| SPR76XX | Bowers SPR76XX SmartPlug Ring Gauge (Grade XX) 76.45 - 89.15mm | 1 | |
| SPR89N | Bowers SPR89N SmartPlug Ring Gauge (Grade Nominal) 89.15 - 101.85mm | 1 | |
| SPR89X | Bowers SPR89X SmartPlug Ring Gauge (Grade X) 89.15 - 101.85mm | 1 | |
| SPR89XX | Bowers SPR89XX SmartPlug Ring Gauge (Grade XX) 89.15 - 101.85mm | 1 | |
| SPR9N | Bowers SPR9N SmartPlug Ring Gauge (Grade Nominal) 9.27 - 12.95mm | 1 | |
| SPR9X | Bowers SPR9X SmartPlug Ring Gauge (Grade X) 9.27 - 12.95mm | 1 | |
| SPR9XX | Bowers SPR9XX SmartPlug Ring Gauge (Grade XX) 9.27 - 12.95mm | 1 | |
| SPRG618RB | BLADE, SPRING PULL 3/16 6IN L | 1 | |
| SPRG625RB | BLADE, SPRING PUSH 1/4 6IN L | 1 | |
| SPRING BALANCE | 5 DAN (12LBF) SPRING BALANCE | 1 | |
| SPRING BALLANCE (100DAN) | SPRING BALLANCE (100DAN) | 1 | |
| SPRING LOAD TESTER | SPRING LOAD TESTER 136KG | 1 | |
| SPSZE4039 | ADAPTER LOCK RING | 1 | |
| SPT-258 | Reflection Ring Probe, .90" OD, .53" ID, .90" Height, 50Hz-5KHz | 1 | |
| SPTech RR206-5 | Ring Reflection Probe, .255"ID min, 1-5KHz, Triax | 1 | |
| SPTech RR207-5 | Ring Reflection Probe, .360"ID, 1-5KHz, Triax | 1 | |
| SR1X6 | STEEL ROD BEARING CUP | 1 | |
| SR25W1SS | BALL BEARING RECIRCULANTES DE ACO | 1 | |
| SR5722-01C00000 | CONSUMABLE TOOLS REPAIR KIT FWD PINTLE BEARING RETAINING NUT | 1 | |
| SR5722-01T00000 | DURABLE TOOLS REPAIR KIT FWD PINTLE BEARING RETAINING NUT | 1 | |
| SRES 24 | RING ADAPTOR 3/4 (ADOPTER TORQUE WRENCH 3/4 WR S2) | 2 | |
| SRES 28 | RING ADAPTOR 7/8 ( ADOPTER TORQUE WRENCH 7/8 HEX) | 1 | |
| SRP300CF | 3PC SNAP RING SET RED | 1 | |
| SRPC 4700 | PLIERS,RETAINING RING FIXD T | 3 | |
| SRPC3800 | PLIERS,RETAINING RING FIXD T | 3 | |
| SRPC3845G | SNAP RING PLIERS 45DEG GRN | 1 | |
| SRPC3890 | PLIERS,RETAINING RING FIXD T | 3 | |
| SRPC4700 | PLIERS,RETAINING RING FIXD T | 3 | |
| SRPC4745G | SNAP RING PLIERS 45DEG GRN | 1 | |
| SRPC4745O | SNAP RING PLIERS 45DEG ORG | 1 | |
| SRPC4790 | CONVERTIBLE RETAINING RING PLIERS (RED) | 1 | |
| SRPC7045G | SNAP RING PLIERS 45 DEG GREEN | 1 | |
| SRPC7045O | SNAP RING PLIERS 45DEG ORANGE | 1 | |
| SRPC7090CBT | 90DEG RING PLIERS COMBAT TAN | 1 | |
| SRPC9045ADP | 45DEG RING PLIERS DK PURPLE | 1 | |
| SRPC9090ACBT | 90DEG RING PLIERS COMBAT TAN | 1 | |
| SRPCR105 | 5PC SNAP RING PLIERS SET RED | 1 | |
| SRPCR105ADD | 5PC SNAP RING PLIERS SET RED | 1 | |
| SRPCR105DT | 5PC SNAP RING PLIER SET DRKTI | 1 | |
| SRPCR107 | 7PC SNAP RING PLIERS SET RED | 1 | |
| SRPCR112 | 12PC SNAP RING PLIERS SET RED | 1 | |
| SRPCR112BK | 12PC SNAP RING PLIERS SET RED | 1 | |
| SRPCR3800 | SNAP RING PLIERS RED | 1 | |
| SRPCR3800DT | SNAP RING PLIERS DRK TITAN | 1 | |
| SRPCR3845 | SNAP RING PLIERS 45 DEG RED | 1 | |
| SRPCR3845BK | SNAP RING PLIERS 45 DEG BLACK | 1 | |
| SRPCR3845DT | SNAP RING PLIRS 45DEG DK TITAN | 1 | |
| SRPCR3845G | SNAP RING PLIERS 45 DEG GREEN | 1 | |
| SRPCR3845HV | SNAP RING PLIERS 45 DEG HI VIS | 1 | |
| SRPCR3845MB | SNAP RING PLIERS 45 DEG PWRBLU | 1 | |
| SRPCR3845O | SNAP RING PLIERS 45DEG ORANGE | 1 | |
| SRPCR3890 | SNAP RING PLIERS 90 DEG RED | 1 | |
| SRPCR3890BK | SNAP RING PLIERS 90 DEG BLACK | 1 | |
| SRPCR3890DT | SNAP RING PLIRS 90DEG DK TITAN | 1 | |
| SRPCR3890G | SNAP RING PLIERS 90 DEG GREEN | 1 | |
| SRPCR3890HV | SNAP RING PLIERS 90 DEG HI VIS | 1 | |
| SRPCR3890MB | SNAP RING PLIERS 90 DEG PWRBLU | 1 | |
| SRPCR3890O | SNAP RING PLIERS 90DEG ORANGE | 1 | |
| SRPCR3890PB | SNAP RING PLIERS 90 DEG PRL BL | 1 | |
| SRPCR4700 | SNAP RING PLIERS RED | 1 | |
| SRPCR4700DT | SNAP RING PLIERS DK TITAN | 1 | |
| SRPCR4745 | SNAP RING PLIERS 45 DEG RED | 1 | |
| SRPCR4745BK | SNAP RING PLIERS 45 DEG BLACK | 1 | |
| SRPCR4745DT | SNAP RING PLIRS 45DEG DK TITAN | 1 | |
| SRPCR4745G | SNAP RING PLIERS 45 DEG GREEN | 1 | |
| SRPCR4745HV | SNAP RING PLIERS 45 DEG HI VIS | 1 | |
| SRPCR4745MB | SNAP RING PLIERS 45 DEG PWRBLU | 1 | |
| SRPCR4745O | SNAP RING PLIERS 45DEG ORANGE | 1 | |
| SRPCR4790 | SNAP RING PLIERS 90 DEG RED | 1 | |
| SRPCR4790BK | SNAP RING PLIERS 90 DEG BLACK | 1 | |
| SRPCR4790DT | SNAP RING PLIRS 90DEG DK TITAN | 1 | |
| SRPCR4790G | SNAP RING PLIERS 90 DEG GREEN | 1 | |
| SRPCR4790HV | SNAP RING PLIERS 90 DEG HI VIS | 1 | |
| SRPCR4790MB | SNAP RING PLIERS 90 DEG PWRBLU | 1 | |
| SRPCR4790O | SNAP RING PLIERS 90DEG ORANGE | 1 | |
| SRPCR7000 | SNAP RING PLIERS RED | 1 | |
| SRPCR7000DT | SNAP RING PLIERS DK TITAN | 1 | |
| SRPCR7045 | SNAP RING PLIERS 45 DEG RED | 1 | |
| SRPCR7045BK | SNAP RING PLIERS 45 DEG BLACK | 1 | |
| SRPCR7045DT | SNAP RING PLIRS 45DEG DK TITAN | 1 | |
| SRPCR7045G | SNAP RING PLIERS 45 DEG GREEN | 1 | |
| SRPCR7045HV | SNAP RING PLIERS 45 DEG HI VIS | 1 | |
| SRPCR7045MB | SNAP RING PLIERS 45 DEG PWRBLU | 1 | |
| SRPCR7045O | SNAP RING PLIERS 45DEG ORANGE | 1 | |
| SRPCR7090 | SNAP RING PLIERS 90 DEG RED | 1 | |
| SRPCR7090BK | SNAP RING PLIERS 90 DEG BLACK | 1 | |
| SRPCR7090DT | SNAP RING PLIRS 90DEG DK TITAN | 1 | |
| SRPCR7090G | SNAP RING PLIERS 90 DEG GREEN | 1 | |
| SRPCR7090HV | SNAP RING PLIERS 90 DEG HI VIS | 1 | |
| SRPCR7090MB | SNAP RING PLIERS 90 DEG PWRBLU | 1 | |
| SRPCR7090O | SNAP RING PLIERS 90DEG ORANGE | 1 | |
| SRPCR9000 | SNAP RING PLIERS RED | 1 | |
| SRPCR9000DT | SNAP RING PLIERS DRK TITAN | 1 | |
| SRPCR9045 | SNAP RING PLIERS 45 DEG RED | 1 | |
| SRPCR9045BK | SNAP RING PLIERS 45 DEG BLACK | 1 | |
| SRPCR9045DT | SNAP RING PLIRS 45DEG DK TITAN | 1 | |
| SRPCR9045G | SNAP RING PLIERS 45 DEG GREEN | 1 | |
| SRPCR9045HV | SNAP RING PLIERS 45 DEG HI VIS | 1 | |
| SRPCR9045MB | SNAP RING PLIERS 45 DEG PWRBLU | 1 | |
| SRPCR9045O | SNAP RING PLIERS 45DEG ORANGE | 1 | |
| SRPCR9090 | SNAP RING PLIERS 90 DEG RED | 1 | |
| SRPCR9090BK | SNAP RING PLIERS 90 DEG BLACK | 1 | |
| SRPCR9090DT | SNAP RING PLERS 90DEG DK TITAN | 1 | |
| SRPCR9090G | SNAP RING PLIERS 90 DEG GREEN | 1 | |
| SRPCR9090HV | SNAP RING PLIERS 90 DEG HI VIS | 1 | |
| SRPCR9090MB | SNAP RING PLIERS 90 DEG PWRBLU | 1 | |
| SRPCR9090O | SNAP RING PLIERS 90DEG ORANGE | 1 | |
| SRPCRR9045DT | SNAP RING PLIRS 45DEG Dk Titan | 1 | |
| SS989B | DIC SOLDERING SYSTEM | 1 | |
| SSDMR4BORR | NONMAG RAT SCRWDRVR W RET RING | 1 | |
| SSO0667214 | PULLERS FOR DISMANTLING-MOUNTING OF MR1-3 COMPRESSOR BEARINGS | 1 | |
| ST-1624-2 | THRUST BEARING I.D. 1/2 X O.D. 3/4 X 1/16 THK | 1 | |
| ST-1632-2 | BRONZE THRUST BEARING ¿1/2I.D. X ¿1"O.D. | 1 | |
| ST-25 | LYCOMING Engines ST-25 Valve Spring and Bar Compressor | 2 | |
| ST-80 | ST SERIES SOLDERING STATION 80W | 1 | |
| ST2220-1-11A | POSITIONER,SPRING LOAD(ST2220-1-11A) | 1 | |
| ST2220-1-1MOD | POSITIONER AND RING ASSEMBLY | 1 | |
| ST22220-1-14A | POSITIONER,SPRING LOADED(ST2220-1-14A | 1 | |
| ST2570-28 | SCREWDRIVER - SPECIAL FOR BACB10B CAM FOLLOWER BEARINGS | 1 | |
| ST2580-103 | WRENCH - ROD END BEARING TOOL IS USED TO HOLD | 1 | |
| ST2580-267-XX-X-X | WRENCH - SPANNER ADAPTER FOR BACN10RF BEARING RETAINER NUTS (ST2580-267 DRAWING) | 1 | |
| ST2580-381 | WRENCH-BEARING CAP INST/REMV, NLG DRAG BRACE | 4 | |
| ST2580-381A | Wrench - Bearing Cap Instl/Rmvl NLG Drag Brace | 2 | |
| ST30-8783 | ROAD MAP, TEST TOOL BEARING, PROOF LOAD TEST | 1 | |
| ST30-8783-1 | BEARING PROOFLOAD TEST, | 1 | |
| ST30-8783-10 | BEARING PROOFLOAD TEST, | 1 | |
| ST30-8783-11 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-12 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-13 | Road map,test tool bearing proof load test | 2 | |
| ST30-8783-14 | Road map,test tool bearing proof load test | 2 | |
| ST30-8783-15 | Road map,test tool bearing proof load test | 2 | |
| ST30-8783-16 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-17 | Road map,test tool bearing proof load test | 2 | |
| ST30-8783-18 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-19 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-2 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-20 | Road map,test tool bearing proof load test | 3 | |
| ST30-8783-21 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-22 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-23 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-24 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-25 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-26 | TEST TOOL, BEARING PROOF LOAD TEST, | 2 | |
| ST30-8783-27 | TEST TOOL, BEARING PROOF LOAD TEST, | 3 | |
| ST30-8783-28 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-29 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-3 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-30 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-31 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-32 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-33 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-4 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-5 | TEST TOOL, BEARING PROOF LOAD TEST, | 2 | |
| ST30-8783-6 | TEST TOOL, BEARING PROOF LOAD TEST, | 2 | |
| ST30-8783-7 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783-8 | TEST TOOL, BEARING PROOF LOAD TEST, | 2 | |
| ST30-8783-9 | TEST TOOL, BEARING PROOF LOAD TEST, | 1 | |
| ST30-8783A | ROAD MAP FOR BEARING PROOF LOAD TESTING | 1 | |
| ST30-8783A-1 | ROADMAP FOR BEARING-P/L | 1 | |
| ST30-8783A-1-M | ROADMAP FOR BEARING-P/L | 1 | |
| ST30-8783A-10 | ROADMAP FOR BEARING-P/L | 1 | |
| ST30-8783A-10-M | ROADMAP FOR BEARING-P/L | 1 | |
| ST30-8783A-11 | ROADMAP FOR BEARING-P/L | 1 | |
| ST30-8783A-11-M | ROADMAP FOR BEARING-P/L | 1 | |
| ST30-8783A-15 | TOOL-BEARING PROOF LOAD TEST | 3 | |
| ST30-8783A-2 | ROADMAP FOR BEARING-P/L | 1 | |
| ST30-8783A-2-M | ROADMAP FOR BEARING-P/L | 1 | |
| ST30-8783A-30 | BEARING PROOF - LOAD TEST | 2 | |
| ST30-8783A-43 | BEARING PROOF LOAD TEST KIT | 2 | |
| ST30-8783A-44 | BEARING PROOF LOAD TEST KIT | 2 | |
| ST30-8783A-5 | BEARING PROOF LOAD TEST TOOL | 1 | |
| ST30-8783A-57 | BEARING PROOF LOAD TEST | 1 | |
| ST30-8783A-58 | BEARING PROOF LOAD TEST | 1 | |
| ST30-8783A-60 | BEARING PROOF LOAD TESTING KIT | 1 | |
| ST30-8783A1 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A10 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A11 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A12 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A13 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A14 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A15 | BEARING PROOF LOAD TESTING KIT, | 3 | |
| ST30-8783A16 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A17 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A18 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A19 | BEARING PROOF LOAD TESTING KIT, | 3 | |
| ST30-8783A2 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A20 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A21 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A22 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A23 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A24 | BEARING PROOF LOAD TESTING KIT, | 2 | |
| ST30-8783A25 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A26 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A27 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A28 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A29 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A3 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A30 | BEARING PROOF LOAD TESTING KIT, | 2 | |
| ST30-8783A31 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A32 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A33 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A34 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A35 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A36 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A37 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A38 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A39 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A4 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A40 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A41 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A42 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A43 | BEARING PROOF LOAD TESTING KIT, | 2 | |
| ST30-8783A44 | BEARING PROOF LOAD TESTING KIT, | 2 | |
| ST30-8783A45 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A46 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A47 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A48 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A49 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A5 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A50 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A51 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A52 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A53 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A54 | BEARING PROOF LOAD TESTING KIT, | 2 | |
| ST30-8783A55 | BEARING PROOF LOAD TESTING KIT, | 2 | |
| ST30-8783A56 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A57 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A58 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A59 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A6 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A60 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A61 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A62 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A63 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A64 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A65 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A66 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A67 | BEARING PROOF LOAD TESTING KIT, | 2 | |
| ST30-8783A68 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A7 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A8 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST30-8783A9 | BEARING PROOF LOAD TESTING KIT, | 1 | |
| ST3109H | FLOORBOARD FLARING TOOL | 6 | |
| ST3268-073 | METERING PLUG SECANDRY | 1 | |
| ST3821-01 | RING, RETAINING, 0.238 SFT DIA X 0.029 | 1 | |
| ST4013171 | RING INSIDE W/SUPPORT | 1 | |
| ST42-00 | REMOTE MONITORING AND CONTROL | 1 | |
| ST61920 | Gauge, Air, Depth Ring | 2 | |
| ST70110 | Driver, Bearing | 1 | |
| ST7022059 | RING-SNAP,D12 | 1 | |
| ST70281 | Inserter, Bearing and Bushing | 2 | |
| ST70282 | Inserter, Bearing and Bushing | 2 | |
| ST71240 | Inserter, Bearing and Bushing | 2 | |
| ST7217J | Standard tool-algnment pin with waring streamer | 1 | |
| ST75 | DESOLDERING TOOL | 1 | |
| ST80 | SOLDERING STATION 80W | 1 | |
| ST81129-20 | BEARING, CRADLE | 1 | |
| ST81129-3 | BEARING, CRADLE | 1 | |
| ST81129-5 | BEARING, CRADLE | 1 | |
| ST848 | Standard tool-installation tool "O" rings | 15 | |
| ST8783-6 | STANDARD TOOL - ASSEMBLY, PROOF LOAD TEST EQUIPMENT, BACB10FB08GC BEARING INSTALLATION | 1 | |
| ST8783-B-1 (-10) | LOADRING | 1 | |
| ST8783F | STANDARD TOOL - BEARING RETENTION PROOF TEST | 1 | |
| ST8783F-0625-035-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0687-033-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0688-033-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0750-039-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0781-039-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-0906-045-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-0969-054-16 | Standard tool bearing retention proof test | 2 | |
| ST8783F-1-1437-075 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-1563-084 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-1912-111 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-2065-111 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1-2360-134 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1010-063-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1094-058-1 | Standard tool bearing retention proof test | 3 | |
| ST8783F-1187-075-1 | BEARING PROOF LOAD TEST TOOL | 1 | |
| ST8783F-1218-068-1 | BEARING PROOF LOAD | 2 | |
| ST8783F-1218-750-1 | BEARING PROOF LOAD | 1 | |
| ST8783F-1437-075-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1750-075-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1874-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-1899-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-1912-111-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-1938-140-1 | Standard Tool-Bearing Retention Proof Test | 1 | |
| ST8783F-2000-110-1 | BEARING PROOF LOAD TEST TOOL | 1 | |
| ST8783F-2065-111-1 | BEARING PROOF LOAD | 1 | |
| ST8783F-2360-134-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-2500-423-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-3000-150-1 | Standard tool bearing retention proof test | 1 | |
| ST8783F-812-437-16 | Standard tool bearing retention proof test | 1 | |
| ST8783F1-1000-050 | KIT: TEST,LOAD,PROOF,BEARING, ANVIL & LOAD RING | 1 | |
| ST8783F1-1000-063 | KIT: TEST,LOAD,PROOF,BEARING, ANVIL & LOAD RING | 1 | |
| ST8783F1-1094-058 | KIT: TEST,LOAD,PROOF,BEARING, ANVIL & LOAD RING | 1 | |
| ST8783F1-1912-111 | KIT: TEST,LOAD,PROOF,BEARING, ANVIL & LOAD RING | 1 | |
| ST8783F1-2500-140 | BEARING PROOF LOAD TEST KIT (ANVIL & LOA, | 1 | |
| ST8783F2-0969-054 | SET: ANVIL & LOAD RING,2PC, FOR BEARING PROOF LOAD TEST | 1 | |
| ST8783F2-2182-118 | BELASTUNGSTEST-KIT: KUGELLAGER, ANVIL & LOAD RING | 1 | |
| ST878D-7 | SPRING (MADE PER DWG) | 1 | |
| ST90133 | Inserter, Bearing and Bushing | 1 | |
| ST90139 | Inserter, Bearing and Bushing | 2 | |
| ST90361 | Inserter, Bearing and Bushing | 2 | |
| ST916C-1 | Deburring Tool | 1 | |
| ST918A | Mandrel - Bearing Pressing | 4 | |
| ST918A-1000-1600 | MANDREL BEARING PRESSING | 1 | |
| ST918A-1000-1600-M | MANDREL BEARING PRESS | 1 | |
| ST918A-1000-1750 | MANDREL BEARING PRESSING | 4 | |
| ST918A-1000-1875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-1912 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1000-1937 | MANDREL BEARING PRESSING | 1 | |
| ST918A-1000-1937-M | MANDREL BEARING PRESS | 1 | |
| ST918A-1000-2250 | MANDREL-BEARING PRESSING | 1 | |
| ST918A-1000-2500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1180-2064 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-1250-2360 | MANDREL BEARING PRESSING | 2 | |
| ST918A-1250-2360-M | MANDREL BEARING PRESS | 1 | |
| ST918A-1250-2375 | MANDREL BEARING PRESSING | 1 | |
| ST918A-1312-1750 | MANDREL BEARING PRESSING | 1 | |
| ST918A-1375-2250 | Standard Tool - Mandrel, Bearing Pressing | 1 | |
| ST918A-1375-2562 | MANDREL-BEARING PRESSING | 1 | |
| ST918A-1375-2572 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2582 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-2856 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1375-3500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1378-2440 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-2812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1500-3125 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1563-2312 | BEARING PRESSING MANDREL | 1 | |
| ST918A-1625-2964 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1750-3339 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-1771-2952 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-1813-2562 | MANDREL BEARING PRESSING | 1 | |
| ST918A-190-625 | MANDREL BEARING PRESSING | 1 | |
| ST918A-190-625-M | MANDREL BEARING PRESS | 1 | |
| ST918A-190-777 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-2125-3592 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-1000 | BEARING MANDREL | 1 | |
| ST918A-250-562 | MANDREL-BEARING PRES | 1 | |
| ST918A-250-605 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-625 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-250-656 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-250-687 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-250-689 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-250-750 | BEARING MANDREL | 1 | |
| ST918A-250-901 | Standard tool mandrel-bearing-pressing bacb10a | 4 | |
| ST918A-2500-3937 | MANDREL -0 BEARING -0 PRESSING | 1 | |
| ST918A-260-687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-688 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-689 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-260-750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-3000-5000 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-312-1250 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-687 | MANDREL-BEARING PRESSING | 4 | |
| ST918A-312-750 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-781 | BEARING MANDREL TOOL | 3 | |
| ST918A-312-783 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-312-812 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-315-656 | MANDREL-BEARING PRESSING | 1 | |
| ST918A-375-1500 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-500 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-812 | MANDREL BEARING PRESSING | 1 | |
| ST918A-375-875 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-375-876 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-375-906 | MANDREL BEARING PRESSING | 1 | |
| ST918A-375-906-M | MANDREL BEARING PRESS | 1 | |
| ST918A-437-906 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-500-1000 | MANDREL, BEARING PRESSING | 4 | |
| ST918A-500-1065 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1094 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1095 | STANDARD TOOL MANDREL, BEARING, PRESSING BACB10A | 1 | |
| ST918A-500-1125 | BEARING MANDREL | 1 | |
| ST918A-500-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-500-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1187 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-562-1188 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1125 | Standard tool mandrel-bearing-pressing bacb10a | 2 | |
| ST918A-625-1187 | MANDREL-BEARING PRESSING | 1 | |
| ST918A-625-1687 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1187 | Mandrel - Bearing Pressing | 1 | |
| ST918A-750-1437 | Standard tool mandrel-bearing-pressing bacb10a | 3 | |
| ST918A-750-1625 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1750 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-750-1930 | MANDREL -0 BEARING | 1 | |
| ST918A-750-1937 | Standard tool mandrel-bearing-pressing bacb10a | 1 | |
| ST918A-772-1065 | BEARING PRESSING MANDREL | 1 | |
| ST918A-875-1312 | BEARING MANDREL | 1 | |
| ST918A250-687 | MANDREL, BALL BEARING PRESSING | 3 | |
| ST918A500-1000 | Mandrel - Bearing Pressing BACB10A | 4 | |
| ST918B | Mandrel - Bearing Pressing | 1 | |
| ST918B-1-750-1000 | Mandrel - Bearing Pressing | 1 | |
| ST918B-3-500-1687 | Standard tool mandrel bearing pressing BACB10B | 1 | |
| ST918B-4-375-875 | MANDREL BEARING PRESSING | 1 | |
| ST918C | Mandrel - Bearing Pressing | 1 | |
| ST918C-1375-2812 | Mandrel, Bearing Pressing | 1 | |
| ST918C-250-901 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-312-1250 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-375-1437 | MANDREL ROLLER BEARING PRESSING | 2 | |
| ST918C-500-1625 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1125 | MANDREL BEARING PRESSING | 1 | |
| ST918C-625-1375 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-1937 | Standard tool mandrel-bearing pressing bacb10c | 1 | |
| ST918C-625-2375 | MANDREL BEARING PRESSING | 1 | |
| ST918C-875-1812 | MANDREL, BEARING PRESSING | 1 | |
| ST918D | Mandrel - Bearing Pressing | 1 | |
| ST918D-750-1250-620 | Mandrel - Bearing Pressing | 1 | |
| ST918D–750-1250-620 | MANDRELS- BEARING-PRESSING BACB10D | 1 | |
| ST919 | STANDARD TOOL SUPPORT BEARING INSTALL | 3 | |
| ST919-1250 | Standard tool support bearing install | 3 | |
| ST919-1750 | Standard tool support bearing install | 1 | |
| ST919-1937 | Standard tool support bearing install | 1 | |
| ST919-625 | Standard tool support bearing install | 1 | |
| ST919-812 | Standard tool support bearing install | 1 | |
| ST919-875 | Standard tool support bearing install | 1 | |
| ST919-901 | Standard tool support bearing install | 4 | |
| ST91BA | BEARING FITTINGS (MANDRELS) | 1 | |
| ST921E | PULLER BEARING HOUSING SHEAR PIN WLG FWD TRUNNION | 10 | |
| ST925-1771-2952 | Standard tool point staking tool bearing retention | 4 | |
| ST925-250-750 | Standard tool point staking tool bearing retention | 2 | |
| ST925-250-901 | Standard tool point staking tool bearing retention | 4 | |
| ST925-625-1062 | Standard tool point staking tool bearing retention | 1 | |
| ST926A-3-2 | BODY BEARING STAKE | 1 | |
| ST926F-1 | ROLLER SWAGE BEARING AND SLEEVE REPAIR KIT - BAC5435 PROCESS | 1 | |
| ST926F-34 | ROLLER SWAGE BEARING AND SLEEVE REPAIR KIT - BAC5435 PROCESS | 1 | |
| ST926G | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, BEARING WITH GROOVE 0.500 TO 1.250-INCH RACE SWAGE (TYPE III) | 1 | |
| ST926G-1.75-.750-1.000-1.625 | BEARING REMOVE / INSTALL / SWAGE STANDARD TOOL | 1 | |
| ST927-10 | BEARING REMOVAL TOOL 0.7500" DIA BEAR | 1 | |
| ST927-4 | REMOVER, BEARING AND BUSHING | 4 | |
| ST927-6 | REMOVER, BEARING AND BUSHING | 7 | |
| ST927-8 | BEARING REMOVAL TOOL 0.5625" DIA BEARI | 1 | |
| ST927AA-1 | STANDARD TOOL - BACB10CN3 BEARING REMOVAL TOOL | 1 | |
| ST927AA-2 | STANDARD TOOL - BACB10AG4MC BEARING REMOVAL TOOL | 1 | |
| ST927C | STANDARD TOOL - BEARING REMOVAL TOOL | 4 | |
| ST927C-10 | Standard tool-bearing removal tool | 5 | |
| ST927C-108 | Standard tool-bearing removal tool | 1 | |
| ST927C-11 | Standard tool-bearing removal tool | 4 | |
| ST927C-114 | Standard Tool - Bearing removal | 1 | |
| ST927C-136 | Standard tool-bearing removal tool | 4 | |
| ST927C-139 | Standard tool-bearing removal tool | 5 | |
| ST927C-142 | Standard tool-bearing removal tool | 4 | |
| ST927C-20 | Standard tool-bearing removal tool | 1 | |
| ST927C-5 | Standard tool-bearing removal tool | 5 | |
| ST927C-81 | Standard tool-bearing removal tool | 4 | |
| ST927J | STANDARD TOOL - HOLE SAW, BEARING REMOVAL | 1 | |
| ST928A | ROLLER STAKING HAND TOOL - YD-134 BEARING | 1 | |
| ST928D | Standard tool-roller swage，bearing sleeve | 1 | |
| ST928H | STANDARD TOOL - BEARING REMOVE/INSTALL/SWAGE, SLEEVE OUTSIDE DIAMETER 1.33 THRU 2.25-INCH SLEEVE TYPE | 1 | |
| ST929-1A | STANDARD TOOL - ROLLER SWAGING SLEEVE BEARING | 1 | |
| ST929-1A-1250-2000 | Standard tool-roller swage sleeve bearing | 1 | |
| ST929-1A-250-901 | Standard tool-roller swage sleeve bearing | 1 | |
| ST929-2A | STANDARD TOOL.BEARING SLEEVE.STAKING TOOL 3 POIINT | 1 | |
| ST929-2A-2000-1250 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-3500-1375 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-4800-2500 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929-2A-5000-3000 | Standard tool bearing sleeve staking tool 3 point | 1 | |
| ST929H | STANDARD TOOL-BEARING REMOVAL/INSTALL/SWAGE.SLEEVE | 1 | |
| ST930-LT | LOAD TEST - BEARING BAC 5435 | 1 | |
| ST930-LT-375-906-801 | Standard tool load test-bearing BAC 5435 | 1 | |
| ST930-LT-900-1000-437 | BEARING LOAD TEST | 1 | |
| ST931 | STANDARD TOOL - BALL POINT MULTIPLE - BEARING STAKING TOOL | 1 | |
| ST931-190-500 | Standard tool,ball point multiple-bearing starking tool | 1 | |
| ST931-250-750 | Standard tool,ball point multiple-bearing starking tool | 2 | |
| ST931A | BEARING STAKING TOOL - ADJUSTABLE BALL POINT | 2 | |
| ST931D | BEARING STAKING TOOL -ADJUSTABLE BALL POINT | 1 | |
| ST932-S | SPINDLE - ROLLER SWAGE TOOL HOUSING, BEARING RETENTION | 1 | |
| ST933-2250-1250 | Standard tool swagong tool housing bearing ring lock | 1 | |
| ST93482 | Removal Tool, Bearing and Gear | 1 | |
| ST93946 | Guide, Bearing | 1 | |
| ST982J | CENTERING GUIDE | 1 | |
| STAB BEARING CHECK DIAL | STAB BEARING CHECK DIAL TOOL | 1 | |
| STD-1171 | LOAD MEASURING DEVICE-0-30,000LB CAPACITY | 1 | |
| STD-1289 | GUIDE SPRING - NOZZLE, FOR 3/8 INCH I.D. NOZZLE | 1 | |
| STD-1307 | TOOL – OVER-CENTERING, MLG UPLOCK HOOK (0.500” DIA X 24” METAL ROD, WITH PROTECTIVE RUBBER TUBING) | 1 | |
| STD-1312 | PULLER - BLIND HOLE BEARING, 0.2500 TO 1.0625 INCH | 1 | |
| STD-13898 | HEADSET WITH BOOM MIC AND TWO-PRONG PLUG (FOR USE ON FLIGHT DECK DURING CVR TESTING) | 1 | |
| STD-170 | C-CLAMP - NLG PRELOAD TEST SPRING SCALE ATTACHMENT | 1 | |
| STD-299 | LOAD MEASURING DEVICE | 1 | |
| STD-574FAS | LOANDING TOOL SPRING | 1 | |
| STD-6111 | LOAD MEAUSRING DIVICE 0-1000 LB +-2 | 1 | |
| STD261 | DE-BURRING CUTTER | 1 | |
| STD67665 | Mandrel-Bearing Lapping | 1 | |
| STD67668 | Puller-Bearing And Gears | 1 | |
| SUC 706 | NDT ENGINEERING. COPR./OLYMPUS NDT 5MHZ LONGITUDINAL (STRAIGHT BEAM) TRANSDUCER, 2.5” Ø ELEMENT .375” Ø CASE,.700” TALL, SUPPLIED WITH A SIDE MOUNTED MICRODOT CONNECTOR, INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE | 1 | |
| SWE 192072 | DOLLY BALANCE BEARING | 1 | |
| SZ6431 | BEARINGS AND BUSHING INSTALLATION KIT | 1 | |
| Surfix Pro Paint Meter | Surfix Pro Paint Meter - Thickness gauge for varnish, paint & electroplated coatings, Measuring range: up to 3500 μm /140 mils, Up to 60 hours battery life | 1 | |
| T 27298 | Adjusting Tool Metering Valve Stop Spline | 1 | |
| T-01718030 | POLY CHAIR/ADJ FTRING BEVO | 1 | |
| T-0234 | TOOL,DISC SPRING RETAINER | 1 | |
| T-10M100 | 10MM-1.00 SPLIT RING DIES1991M | 1 | |
| T-10M150 | 10MM-1.50 SPLIT RING DIES1991M | 1 | |
| T-12379 | Bearing Drill Jig | 1 | |
| T-14354 | BEARING DRIVER | 1 | |
| T-16M200 | 16MM-2.00 SPLIT RING DIES1991M | 1 | |
| T-1796E-040 | BEARING DRESSING TOOL | 1 | |
| T-1796e-040 | Bearing Dressing Tool | 1 | |
| T-232287 | Driver,Bearing | 1 | |
| T-24M300 | 24MM-3.00 SPLIT RING DIES1991M | 1 | |
| T-27289 | FIXTURE, HOLDING METERING VALVE ASSY PRE | 1 | |
| T-27298 | ADJUSTING TOOL METERING VALVE STOP SPLINE | 1 | |
| T-275FS | FLARING TOOL - TUBE HAND | 1 | |
| T-2880270 | BZ8250 SOLDERING TORCH KIT | 1 | |
| T-29SATS0401 | 4 PC SOLDERING AID SET | 1 | |
| T-300353 | Driver,Bearing Race | 1 | |
| T-300353PM | DRIVER,BEARING RACE | 1 | |
| T-300540 | Bearing Driver | 1 | |
| T-302842 | Driver-Bearing | 1 | |
| T-304015 | Bearing Driver | 1 | |
| T-304015PM | DRIVER BEARING | 1 | |
| T-304016 | Bearing Driver | 1 | |
| T-304016PM | DRIVER BEARING | 1 | |
| T-304023 | Driver,Bearing | 1 | |
| T-304024 | Driver,Bearing | 1 | |
| T-304037 | Bearing Driver | 1 | |
| T-304038 | Drive-Bearing | 1 | |
| T-304275 | Driver,Bearing | 1 | |
| T-304396 | DRIVER, BEARING | 1 | |
| T-304428 | DRIVER BEARING | 1 | |
| T-304604 | Bearing Driver | 1 | |
| T-3165001 | ENGINE BARRING TOOL ADAPT | 1 | |
| T-410467 | DRIVER, BEARING | 1 | |
| T-412378 | Driver,Bearing | 1 | |
| T-418206 | Driver-Bearing | 1 | |
| T-418656 | O-ring Fixture and driver | 1 | |
| T-4280B | BLIND BEARING PULLER PROTO | 1 | |
| T-428260 | Bearing Driver & Guide | 1 | |
| T-431272 | Driver-Bearing | 1 | |
| T-437802 | Guide Bearing | 1 | |
| T-437815 | Guide Bearing | 1 | |
| T-438867 | Guide and driver, bearing | 1 | |
| T-449154 | Bearing Driver | 1 | |
| T-452123 | Bearing Driver | 1 | |
| T-453739 | Bearing Driver & Guide | 1 | |
| T-455118 | DRIVER BEARING | 1 | |
| T-5M080 | 5MN-0.8 SPLIT RING DIES1991M | 1 | |
| T-60328 | Installation Tool,Rotor-Bearing Holder Assembly | 1 | |
| T-7088405 | 16-14 INSUL RING 6 STUD 25PK | 1 | |
| T-70885371 | 22-18AWG NO6 RING STUD 25PK | 1 | |
| T-70885405 | 16-14AWG NO6 RING STUD 25PK | 1 | |
| T-70885439 | 16-14AWG NO10 RING STUD 25PK | 1 | |
| T-70885454 | 16-14AWG 1/4 RING STUD 25PK | 1 | |
| T-70885504 | 12-10AWG NO10 RING STUD 25PK | 1 | |
| T-70885546 | 12-10 INSUL RING 3/8 STUD 25PK | 1 | |
| T-71043A | Torque Adapter, Rod Bearing Retainer | 1 | |
| T-76938331 | 22-18 AWG NO6 RING STUD-100PK | 1 | |
| T-76938349 | 16-14 AWG NO10 RING STUD-100PK | 1 | |
| T-76938356 | 16-14 AWG 1/4 RING STUD-100PK | 1 | |
| T-76938364 | 12-10 AWG 3/8 RING STUD-100PK | 1 | |
| T-76938372 | 16-14 AWG NO6 RING STUD-100PK | 1 | |
| T-76938380 | 12-10 AWG NO10 RING STUD-100PK | 1 | |
| T-8813959002 | Guide, Centering Device | 1 | |
| T-8816-PFTK | SOLDERING KIT | 1 | |
| T-8819958000 | Ring Holding Tool | 1 | |
| T-8M100 | 8MM-1.00 SPLIT RING DIES1991M | 1 | |
| T-9403 | PLIERS NEEDLE NOSE W/SPRING | 1 | |
| T-95650USA | USA MADE BARRING TOOL | 1 | |
| T-9M100 | 9MM-1.00 SPLIT RING DIES1991M | 1 | |
| T-BOERM21-5 | WRENCH-PAWL AND SPRING 21MM | 1 | |
| T-BOERM22-5 | WRENCH-PAWL AND SPRING 22MM | 1 | |
| T-BOERM23-5 | WR PAWL AND SPRING 23MM | 1 | |
| T-BOERM24-5 | WRENCH-PAWL AND SPRING 24MM | 1 | |
| T-J4331 | PROTO GEAR AND BEARING SEP | 1 | |
| T-RPN-G1 | HD GRIP RING PLIERS | 1 | |
| T-ST2 | SOLDERING TIP .093W X .75L | 1 | |
| T-ST3 | SOLDERING TIP .125W X .75L | 1 | |
| T-ST4 | SOLDERING TIP .187W X .75L | 1 | |
| T-WP30 | SOLDERING IRON 30WATT 120V | 1 | |
| T-WP30HLDR | SOLDERING STAND | 1 | |
| T-YA391-1 | SQ DR RETAINING RING FOR YA391 | 1 | |
| T0051317299 | DE-SOLDERING CLAMP | 1 | |
| T0052920199 | WELLER WXP120 SOLDER PENCIL, 120W, 24V, FOR WX1 AND WX2 SOLDERING STATIONS | 1 | |
| T0052920199N | WELLER WXP120 SOLDER PENCIL, 120W, 24V, FOR WX1 AND WX2 SOLDERING STATIONS | 1 | |
| T0053230699 | WELLER SOLDERING STATION | 1 | |
| T0053402399N | WD1000 SOLDERING STATION, 230V - 80W | 1 | |
| T0053441399N | WD1000 SOLDERING STATION, 230V - 80W | 1 | |
| T0054440699 | SOLDERING TIP | 1 | |
| T0054442399 | SOLDERING TIP | 2 | |
| T0054442499 | SOLDERING TIP | 1 | |
| T0054448299 | SOLDERING TIP | 1 | |
| T0054449899 | SOLDERING TIP | 1 | |
| T0060 | DISC SPRING RETAINER | 1 | |
| T007932 | BEARING SIDE LOAD TEST KIT | 1 | |
| T050 | HEAVY DUTY FLARING TOOL 3/16-5/8" | 1 | |
| T101233 | POWER CYLINDERS VALVE CENTERING PIN | 1 | |
| T101334 | BAR,DUPLEX BEARING | 1 | |
| T101336 | DUPLEX BEARING NUT WRENCH | 1 | |
| T101449 | WRENCH, DUPLEX BEARING NUT | 1 | |
| T101503 | PLUG, BEARING INSTALLATION AND REMOVAL | 1 | |
| T101504 | PLATE ASSEMBLY, BEARING REMOVAL, ACCESSORY DRIVE | 1 | |
| T101547 | Staking Tool- Drag Pin Bearing | 1 | |
| T101566 | BAR, DUPLEX BEARING REMOVAL | 1 | |
| T101600 | WRENCH, DUPLEX BEARING NUT | 1 | |
| T101736 | ALTERNATE QUILL DUPLEX BEARING NUT WRENCH | 1 | |
| T101936 | BEARING REMOVAL MAST TEE ROD | 1 | |
| T101937 | MAST BEARING INSTALLATION AND REMOVAL TOOL | 1 | |
| T101939 | CONNECTOR, MAST BEARING ROD | 1 | |
| T103-165 | MAST BEARING INSTALLATION AND REMOVAL SPLINED ADAPTER | 1 | |
| T103166 | MAST BEARING INSTALLATION AND REMOVAL SCREW AND PLATE SET | 1 | |
| T103167 | MAST BEARING INSTALLATION AND REMOVAL THRUST PLATE | 1 | |
| T103178 | MAST BEARING NUT INSTALLATION AND REMOVAL SOCKET WRENCH | 1 | |
| T103192 | MAST BEARING NUT INSTALLATION AND REMOVAL PROTECTOR SLEEVE | 1 | |
| T103260-121 | ROD SET, MAST BEARING | 1 | |
| T103263 | BEARING HOLDING BAR | 1 | |
| T103324-101 | DUPLEX BEARING REMOVAL DRIVER | 1 | |
| T103331-101 | DRIVER BEARING REMOVAL FREEWHEELING ASSEMBLY | 1 | |
| T103342-101 | SHAFT DUPLEX BEARING SLEEVE (SLEEVE TOOL) | 1 | |
| T10439 | CARBIDE BORING BAR SET | 1 | |
| T116 | SPRING: HD,TOWBAR, | 2 | |
| T12253 | SHOULDER RING TOOL | 1 | |
| T12379 | Bearing Drill Jig | 1 | |
| T131946 | Q-Spring torque adapter | 1 | |
| T14228 | JIG, MODIFIED TRANSISTOR (FET) SOLDERING FIXTURE | 1 | |
| T15421 | JIG, MODIFIED TRANSISTOR (FET) SOLDERING FIXTURE | 1 | |
| T1796E-030 | Bearing Dressing Tool | 1 | |
| T1796E-040 | Bearing Dressing Tool | 1 | |
| T200-210 | Measuring Stand | 1 | |
| T200-210 PM | MEASURING STAND | 1 | |
| T235335 | REMOVER,BEARING AND BUSHING | 1 | |
| T2680002-17 | MAIN LANDIND GEAR SPRING PULLER | 1 | |
| T27289 | Fixture, Holding Metering Valve Assy Preset | 1 | |
| T27298 | Adjusting Tool Metering Valve Stop Spline | 1 | |
| T28004426-AA-1 | FEEDBACK WIRE SOLDERING AID | 1 | |
| T2BIS-4.5-6.8-16 | LIGHT SPRING 4.5ID X 6.8OD X 16LG STEEL WIRE | 1 | |
| T3-2.2X3.2X8 | COMPRESSION SPRING ¿2.2 ID X ¿3.2 OD X 8 LENGHT | 1 | |
| T300542 | REMOVER,BEARING AND BUSHING | 2 | |
| T3009208 | BEARING PRELOAD SETTING FIXTURE | 1 | |
| T3014706 | SPRING WINDUP TOOL | 1 | |
| T3026080 | SPRING WIND UP TOOL | 1 | |
| T302832 | DRIVER PLUG BEARING AND PUSHING | 1 | |
| T302833 | DRIVER PLUG BEARING AND BUSHING | 1 | |
| T302839 | HOLDER BEARING PRESS | 1 | |
| T302840 | GUIDE BEARING PRESS | 1 | |
| T302841 | GUIDE BEARING PRESS | 1 | |
| T302842 | DRIVER PLUG BEARING AND BUSHING | 1 | |
| T304015 | DRIVER BEARING | 1 | |
| T304016 | DRIVER BEARING | 1 | |
| T304172 | PLIERS SNAP RING HYDRAULIC MOTOR PUMP | 1 | |
| T304376 | GUIDE TEFLON RING ASSEMBLY | 1 | |
| T3159-006 | SOLDERING FIXTURE | 1 | |
| T3159-17 | Soldering Aid | 1 | |
| T3159-6 | Soldering Fixture | 1 | |
| T3203-012 | Soldering Fixture | 1 | |
| T324649 | SPRING WINDUP TOOL | 1 | |
| T325728 | MCDU CENTERING CHECK OVERLAY | 1 | |
| T33264 | ANTI SKID LOCKRING ADAPTOR | 10 | |
| T34-01L | ADAPTER: EXTENDED RING HITCH, TO MAKE TR34 10FT TOWBAR | 2 | |
| T3754-009 | FIXTURE: TEST,SOLDERING, | 1 | |
| T3754-01 | SIZING RING AND PISTON GUIDE | 1 | |
| T3754-09 | SOLDERING FIXTURE | 1 | |
| T410468 | DRIVER-BEARING | 1 | |
| T412378 | DRIVER BEARING | 1 | |
| T415105 | CYLINDER BLOCK SPRING COMPRESSOR | 1 | |
| T415107 | GUIDE BEARING | 1 | |
| T418206 | VALVE BLOCK BEARING DRIVER | 1 | |
| T42315-72SC1-101 | SPRING COMPRESSOR, SHEAVE CROWDER, 1 EA • T42315-60SC1, SPRING COMPRESSION FIXTURE, 1 EA | 1 | |
| T428260 | BEARING DRIVER AND GUIDE | 1 | |
| T431272 | DRIVER BEARING | 1 | |
| T449154 | DRIVER BEARING | 1 | |
| T453739 | BEARING DRIVER AND GUIDE | 1 | |
| T46206 | TOOL FOR THE INSTALLATION AND REMOVAL OF THE BEARING CUPS. FOR ATA 32-49-35 | 1 | |
| T462168 | Bearing Holding Fixture | 1 | |
| T477W | BONDING METERS, 1. EA . MFG : AVTRON MAFUFACTURING | 12 | |
| T50077 | SOLDERING IRON HEAT PLATEN | 1 | |
| T505007 | DIRECTIONAL CENTERING TOOL | 1 | |
| T5229 | MANDRIL, PUMP CENTERING ASSY | 1 | |
| T60-1001-C8-1A | TENSIOMETER - CABLE RANGE - 10-200LBS FOR 1/16 3/32 1/8 CABLES, 30-200LBS FOR 5/32 & 3/16 CABLES, AND 80-200LBS FOR 7/32 (OPTI MANUFACTURING CORPORATION) | 28 | |
| T67087-2 | Disk Centering | 1 | |
| T918B | MANDREL - BEARING PRESSING | 1 | |
| TAF00577 | CENTERING GUIDE TOOL | 1 | |
| TAT006 | PUSHROD SPRING COMPRESSOR | 1 | |
| TB-270600S | BEARING HEATER 22 ELDI | 1 | |
| TB-B767 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| TB050-A | SHEARING & S/M BENDING MACHINE | 1 | |
| TB2456 | BOST-BRONZ BEARING THRUST TYPE 1"1/2IDX3"1/2OD | 1 | |
| TB3039G002 | Bearing Fitting Tool - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB3067G002 | Centering Rods | 1 | |
| TB48 | Oil impregnated bronze thrust bearing | 2 | |
| TB512 | Oil impregnated bronze thrust bearing | 1 | |
| TB612 | Oil impregnated bronze thrust bearing | 1 | |
| TB9056G001 | GEARBOX CLUTCH BEARINGS DRIVER | 1 | |
| TB9057G001 | Support, G/B Clutch Bearings - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB9058G001 | Pilot - G/B Clutch Bearings - APS3200 - Pratt & Whitney Aeropower / Pratt & Whitney Canada | 1 | |
| TB9064G001 | GEARBOX BEARING PUMP DRIVER | 1 | |
| TB9082G001 | DRIVER FAN BEARING TOOL (2IT) | 1 | |
| TB9083G001 | DRIVER FAN BEARING | 1 | |
| TB9094G001 | Gearbox Idler Bearing Driver | 1 | |
| TC-50L | TUG UTILITY (TAYLOR-DUNN MANUFACTURING CO.) | 1 | |
| TC-80/120 | TRACTOR TOWING (TAYLOR-DUNN MANUFACTURING CO.) | 1 | |
| TC7-255S | NDT ENGINEERING. COPR./OLYMPUS NDT 5MHZ LONGITUDINAL (STRAIGHT BEAM) TRANSDUCER, 2.5” Ø ELEMENT .375” Ø CASE,.700” TALL, SUPPLIED WITH A SIDE MOUNTED MICRODOT CONNECTOR, INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE | 1 | |
| TCP24P | SOLDERING IRON LOW VOLTAGE | 1 | |
| TD10A | SELF CENTERING FOR 1"DOUBLE HEX DIES | 1 | |
| TD10B | SELF CENTERING FOR 1"DOUBLE HEX DIES | 1 | |
| TDG-25 | Spare Ring, .250" diameter element | 1 | |
| TDG-50 | Spare Ring, .500" diameter element | 1 | |
| TE | TE BRINELL HARDNESS IMAGE AUTOMATIC MEASURING | 1 | |
| TE-000524 | NLG OUTBOARD BEARING CUP PULLER | 1 | |
| TE-000525 | NLG INBOARD BEARING CUP PULLER | 1 | |
| TE38856 | ADAPTOR RING | 1 | |
| TE54255-1 | MONITORING ADAPTOR | 1 | |
| TE65B90115 | ADAPTER CABLE - ENGINE OIL QUANTITY, AIRPLANE WIRING | 1 | |
| TEK-1005 | Ring Reflection, 100Hz-5Khz, Special Radius, 1.0 OD x .425ID | 1 | |
| TEK-3103 | spring drive probe with guide Handel .500" dia by .750" WL Universal Connectors USE BELLOS FOR SPRING | 1 | |
| TEK-4000A | LF Ring Probe, .84"ID x 1.5"MAX OD, 900Hz to 5KHz | 1 | |
| TEK-4000B | LF Ring Probe, .95"ID x 1.6"MAX OD, 900Hz to 5KHz | 1 | |
| TEK-4053 | Ring Probe, Reflection 50Hz-5KHz for NDT745 | 1 | |
| TEK-4055 | Ring Probe with Special Design Coil, NDT760 | 1 | |
| TEK-4056 | Special Ring Probe, .30" ID, .80" OD, 100Hz-8KHz, Reflection, NDT732A | 1 | |
| TEK-4057 | Ring Probe, 0.90" (22.86 mm} outside diameter, 0.53" (13.46 mm) inside diameter. 0.90" (22.86 mm) height, reflection. frequency range 50Hz-5KHz, Triax Connector | 1 | |
| TEK-4059-08A-4L | Reflection Ring Probe .31 IDx .87 OD, 250Hz-40KHz, 4 pin Lemo | 1 | |
| TEK-4059-08A-TF | Special Reflection Ring Probe, .810" OD, .315" ID, 1-100Khz, Triax Connector | 1 | |
| TEK-4059-10B-TF | RING (DONUT) PROBE, ABSOLUTE - REFLECTION, 250 HZ TO 40 KHZ FREQUENCY, ID .394 IN. (10.0 MM), OD .866 IN. (22.0 MM), HEIGHT .984 IN. (25.0 MM) (HOCKING NDT LIMITED OR EQUIVALENT) | 1 | |
| TEK-4062 | Probe, Ring Reflection, 100Hz-350Hz, .750ID x 1.3OD x .9HIGH, Triax | 1 | |
| TEK-4063 | Ring Probe, .57 ID x .77 OD, 10KHz | 1 | |
| TEK-4064 | REFL Ring Probe, .880 ID 1.3 OD .9 high Triax 50-250Hz | 1 | |
| TEK-4065 | Special Ring Probe, .30 ID, 1-20KHz | 1 | |
| TEK-4066 | Special Ring Probe, .30 ID x .600 OD x =.75, 900Hz-5KHz | 1 | |
| TEK-4067 | Special Ring Probe, .33 ID x .550 MAX OD x =.76 H MAX, 900Hz-5KHz, NDT3118 | 1 | |
| TEK-4067-1 | Special Ring Probe, .33 ID x .550 MAX OD x =.76 H MAX, 900Hz-5KHz | 1 | |
| TEK-4067-4L | SPECIAL RING PROBE .33 ID X .550 MAX OD X.=76 H MAX.900HZ-5KHZ NDT3118. 4-PIN LEMO | 1 | |
| TEK-4069 | Special Low Frequency Ring Probe, .390ID, .750-.850OD, 1.0-1.2" H | 1 | |
| TEK-4076 | LF Ring probe, .5"OD, 1.125" OD, 500HZ-2K, 1" Height, w/battery operated LED, Triax Connector | 1 | |
| TEK-4080 | Reflection Ring Probe, Ø.86ID x Ø1.74OD, 10-100KHz, Triax Connector | 1 | |
| TEK-5006/5007 ASY | Transducer Assembly and Manipulating Fixture set, w/ Plunger and Syringe | 1 | |
| TEK-5129-T2 | 5 or 10MHz, 2.010 R, .5 MAX high (CUSTOMER PLEASE SPECIFY FREQUENCY WHEN ORDERING) | 1 | |
| TEK-5154 | Transducer, Boeing 35° in Alum and 42° in Alum, 1 ring (to fit collar/nut) plus 2 transducers | 1 | |
| TEKIT-5006/5007 | Transducer Assembly & Manipulating Fixture Set, Includes all items per 767 PT4 57-50-05 PG9 FIG4, TEK-5006,TEK-5006-C1,TEK-5006-C2, TEK-5007, TEK-5007-C1, Manipulating Rod, Syringe, Cable, Couplant & 1450 Pelican Case *Does not include NDT694 & NDT695 | 1 | |
| TES-2937 | Driver ,Bearing | 1 | |
| TES-2937PM | DRIVER ,BEARING | 1 | |
| TESTO 946 | TEMPERATURE MEASURING DEVICE | 1 | |
| TF 275 A45 | PLARING AND SWAGGING SET | 1 | |
| TF275A | SET, FLARING AND SWA | 2 | |
| TF50B27502-1 | LH ELEVATOR DEFLECTION MEASURING FIXTURE | 1 | |
| TF50B27502-2 | RH ELEVATOR DEFLECTION MEASURING FIXTURE | 1 | |
| TF50B27507 | MEASURING FIXTURE FOR AILERON DEFLECTION AT CONTROL COLUMN | 1 | |
| TF50B32301 | BRAKE DISK CENTERING TOOL | 1 | |
| TF50B52801 | REBORING OF LG OUTER DOOR HING TOOL SET | 1 | |
| TF50B55301 | SPRING LOADED PANEL R/I TOOL | 1 | |
| TF50B55301A | Spring Loaded Fairing Tool | 2 | |
| TF55707-1001 | Restraining Gag (support shock strut during tests) | 1 | |
| TF55707-1002 | Tooling Pin-Yellow (support shock strut during tests) | 1 | |
| TF55707-1003 | Tooling Pin-Red (support shock strut during tests) | 1 | |
| TF55707-1006 | Red and Yellow Collars and Ball Lock Pins (support shock strut during tests) | 1 | |
| TF55707-201 | Test Fixture (support shock strut during tests) | 1 | |
| TFM5A | METRIC DOUBLR FLARING TOOL SET | 1 | |
| TG-200C | TRACTOR TOWING (TAYLOR-DUNN MANUFACTURING CO.) | 1 | |
| TGUA013 | Bowers TGUA013 Universal 20mm Disc Anvils for Measuring Grooves (Pair) | 1 | |
| TGUA014 | Bowers TGUA014 Universal 12mm Disc Anvils Int/Ext for Measuring Grooves (Pair) | 1 | |
| TGUA019 | Bowers TGUA019 Universal Cone Anvils for Measuring Hole Centre Distance Dimn 13mm (Pair) | 1 | |
| TGUA020 | Bowers TGUA020 Universal Cone Anvils for Measuring Hole Centre Distance Dimn 25mm (Pair) | 1 | |
| TGUA021 | Bowers TGUA021 Universal Cone Anvils for Measuring Hole Centre Distance Dimn 50mm (Pair) | 1 | |
| TGUA025 | Bowers TGUA025 Universal Small Dia 6mm Measuring Anvils (Pair) | 1 | |
| TH53R | BAC TH-53R Tow-Bar, 80 to 94 in L, Ring 2 in Telescoping, Powder-Coated, Orange | 3 | |
| TH6R | BAC TH-6R Tow-Bar, 74 in L, Ring 2 in Fixed, Powder-Coated, Orange, For Aircrafts | 2 | |
| THBL1 | BELT LOOP W/LOAD RING | 1 | |
| THWS1 | WRIST STRAP W/SST D-RING | 1 | |
| THWS1A VLECRO | THWS1A VLECRO WRIST STRAP WITH D-RING (USE WITH THL1) | 1 | |
| TK-1573-918 | FEEDBACK RING PULLER | 2 | |
| TK1573-918 | FEEDBACK RING PULLER | 2 | |
| TK1573-918-1 | PULLER, PROPELLER FEEDBACK RING | 2 | |
| TM0801G001 | RETAINING AND GUIDING RING | 1 | |
| TM0801G002 | RETAINING AND GUIDING RING | 1 | |
| TM0801G002 | RETAINING AND GUIDING RING | 1 | |
| TM2715P019 | O-RING CHORD | 1 | |
| TM5082G001 | COLLECTOR AND MESURING TOOL | 3 | |
| TM5098G001 | SET OF 6 CENTERING DOWELS | 2 | |
| TM7033G001 | CENTERING DEVICE | 1 | |
| TM7206G001 | ENDOSCOP KIT SIDE AND DIRECT MEASURING | 1 | |
| TM7671G001 | ENDOSCOP KIT SIDE AND DIRECT MEASURING | 1 | |
| TMA210 | Secure Wormshaft During Slip Torque | 1 | |
| TMAULE | ADAPTER: TAIL SPRING,UNIV, MAULE,ONE SIDE ONLY | 2 | |
| TMH EC37-01-20 | AXE DE TRINGLE | 1 | |
| TMH ET 06-10-00 | TRAILER ENGINE GROUND HANDLING - SINGLE STEERING | 3 | |
| TMH ET06-10-00 | TRAILER, ENGINE GROUND HANDLING - SINGLE STEERING | 3 | |
| TMH TR38 | JACK, TRIPOD -0 SHORING ASSY | 1 | |
| TMHCP13-01-10 | TEFLON CYLINDER RING - FOR TMHCP13-00-00 | 2 | |
| TMHET06-00-00 | 90" ENGINE TROLLEY (DOUBLE STEERING WHEEL) | 4 | |
| TMHET06-10-00 | TRAILER, ENGINE GROUND HANDLING - SINGLE STEERING | 3 | |
| TMHET06-20-00 | TRAILER,ENGINE TRANSPORTATION-DOUBLE STEERING | 4 | |
| TMHET06-20-00-REVI | TRAILER,ENGINE TRANSPORTATION-DOUBLE STEERING | 1 | |
| TMHTB08-10-00 | STEERING BAR - SIMPLIFIED (REPLACE TMHTB08-00-00) | 1 | |
| TMY20-20-002 | BEAD CHECKING RING GAUGE SET FOR "W-O-F" COUPLINGS | 1 | |
| TO-20-040 | SPRING SCALE - CAPACITY 25 DAN (60 LBF) CH 20 STANDART PRACTICA AIRFRAME | 1 | |
| TO-20-050 | SPRING SCALE CPACITY 60DAN''140LBF'' | 1 | |
| TO-20-070 | SPRING SCALE 60DAN/120LBS | 1 | |
| TO-20-30 | SPRING SCALE - CAPACITY 5.4 DAN (12 LBF) | 1 | |
| TO-20-960 | SPRING SCALE 10DAN/22,5LBS | 1 | |
| TO5005 | MORING LINE AID, HOOK | 1 | |
| TORKEL 860 | INDUSTRIAL BATTERY LOAD UNIT SUITABLE FOR MEASURING BATTERY VOLTAGE UPTO 420V. | 1 | |
| TOWB737-C | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| TOWB737S | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| TOWBAR - AIRPLANE, TOWING AND STEERING01-1246-0010 | TOWBAR - AIRPLANE, TOWING AND STEERING01-1246-001 | 1 | |
| TOWUNIV-2 | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| TOWUNIV5S | TOWBAR - AIRPLANE, TOWING AND STEERING | 1 | |
| TP229-13 | DEBURRING | 1 | |
| TP266 | DEBURRING TOOL | 2 | |
| TP479K | BURRAWAY DEBURRING TOOL KIT | 1 | |
| TPC 24 | SOLDERING IRON | 1 | |
| TPENFLX903-9.5 | NDT ENGINEERING CORP - PROBE | 1 | |
| TPENFLX903-9_5 | NDT ENGINEERING CORP - PROBE | 1 | |
| TQN527 | SPRING RATE ADJ TOOL | 1 | |
| TQN566 | SPRING RATE ADJ. TOOL | 1 | |
| TQN59 | DIAL RING REMOVER TOOL | 1 | |
| TR-2 | SCREWDRIVER, HOLD-E-ZEE SPRING | 1 | |
| TR-34-SR | Universal Aircraft Towbar - Tow up to 14,000 lbs - With Shock Ring Hitch Installed | 4 | |
| TR-34SR | Universal Aircraft Towbar - Tow up to 14,000 lbs - With Shock Ring Hitch Installed | 4 | |
| TR34R | BAC TR-34R Tow-Bar, 84 to 104 in L, Ring 2-1/4 in Telescoping, Powder-Coated, Orange, For Aircrafts | 4 | |
| TR34RL | TOWBAR: UNIV W/EXTENDED, 10FT LENGTH RING HITCH | 2 | |
| TR34SR | BAC TR-34SR Tow-Bar, 90 to 112 in L, Shock Ring, Powder-Coated, Orange, For Aircrafts | 4 | |
| TRDG-12 | Replacement Spare Ring, .125" Diameter | 1 | |
| TRDG-25 | Replacement Spare Ring, .250" Diameter | 1 | |
| TRDG-50 | Replacement Spare Ring, .500" Diameter | 1 | |
| TRI-LKG-SKR-VEH-WIR-PROT | TRI-LKG-SKR-VEH-WIR-PROT;Vehicle Wiring Protection Kit for Seeker + Seeker D Mobile Mounts | 1 | |
| TSJ65B82591 | TEST FITTING ASSEMBLY - HYDRAULIC ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 2 | |
| TST1036 | FLOW FENCE RING GAGE - CLOSED | 1 | |
| TT-TB2000-LS/PM-SP | TT-TB2000-LS/PM-SP;Self-Paced - TB2000 Configuring Light Source - Power Meter - 10 minutes | 1 | |
| TT-TB2000-SOFTWARE-SP | TT-TB2000-SOFTWARE-SP;Self-Paced - TB2000 Transferring Files - Updating Software - 25 minutes | 1 | |
| TT-TB4000-MPO-SLMNUM-SP | TT-TB4000-MPO-SLMNUM-SP;Self-Paced - TB4000 MPO OTDR SLM Numbering Mode Testing - 19 minutes | 1 | |
| TTC1731M-SET | REACTION ARM ASSY AND BEARING | 1 | |
| TTPT35 | FASTENER KIT, STUD, SPRING, CUP | 1 | |
| TTT-135 | TRIM TABS MEASURING/BENDING TOOL | 1 | |
| TW-7 | MAULE TW-7 BEARING 3/4" ID | 4 | |
| TW02 | Ionic Systems Trolley Wheels, Blue Centre With Bearings BZWPPR260204D/BLUE | 2 | |
| TWS011202 | END CAP AND RING ASSY - BACHO | 1 | |
| TWS1010722 | SPRING PIN .25 DIA X 1.375 LG | 1 | |
| TWS102417 | O-RING END CAP | 1 | |
| TWS19000005 | RING END | 1 | |
| TY2323 | BONDING RESISTANCE MEASURING DEVICE | 1 | |
| TYPE D-100 | SPRING SCALE (D100)-AMETEK | 1 | |
| TYPE UH27 | MEASURING DEVICE FOR DIELECTRIC TEST. | 1 | |
| U01A280000A | ADAPETR FOR SPRING BALANCE | 1 | |
| U14A270000A | STAKING TOOLS FOR AILERON AND FLAP LINKAGE BEARING | 1 | |
| U15A270000A | TOOLS KIT FOR AILERON AND FLAP LINKAGE BEARING CONVERSION | 1 | |
| U21829 | TOOL NLG DRAG STAY LOCKSPRING R/I | 11 | |
| U21829-1 | TOOL NLG DRAG STAY LOCKSPRING R/I | 1 | |
| U8010012 | 9317797 : BROAD BAND FREQUENCY S-PC-P11 PITCH-CATCH PROBE, BROADBAND FREQUENCY, SPRING LOADED TIPS, | 1 | |
| U8010015 | RIGHT ANGLE MIA PROBE, SMALL 6.35 MM (0.25") TIP DIAMETER, REQUIRES BMM-H (U8770417) FOR SPRING LOAD | 1 | |
| U8010039 | SPO-5629PHV 1/2 X 1/2 BI-MORPH HIGH VOLTAGE PITCH CATCH, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING L | 1 | |
| U8010062 | S-PC-P16 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 1 | |
| U8202510 | THICKNESS GAUGE ;DIGITAL ;MEASURING PRINCIPLE: ULTRASOUND ;MEASURING RANGE: 0.5 TO 635 MM. TYPE: OLYMPUS 27MG | 1 | |
| U8634008 | NORTEC BRIDGE RING/ DONUT SPO-996 | 1 | |
| U8770335 | RIGHT ANGLE MIA PROBE, INTERNAL ADJUSTABLE SPRING TENSION, STANDARD 12.7 MM (0.5") TIP DIAMETER | 1 | |
| U8770416 | SPRING LOADED TRASDUCER HOLDER. FITS V260-SM SONOPEN | 1 | |
| U8770417 | SPRING HOUSING ASSEMBLY FOR S-MP-3(U8010011), S-MP-3L (U8770345), S-MP-4 (U8010015) AND S-MP-4L (U87 | 1 | |
| U8800581 | SPECIAL TOOLS (1) USE A NONCONDUCTIVE STRAIGHTEDGE DURING CALIBRATION AND THE INSPECTION (FOR SCAN ROWS 1 AND 4). (2) USE A CIRCLE TEMPLATE DURING THE INSPECTION TO DO SEMICIRCULAR SCANS AROUND THE RIVETS (FOR SCAN ROWS 2 AND 3). (S.NO: MGAT/NDT/001) | 1 | |
| U8800601 | S-PC-P14 BONDMASTER PITCH-CATCH PROBE, BROADBAND FREQUENCY, HIGH VOLTAGE, SPRING LOADED TIPS, 15 MM | 2 | |
| UN-ATE BASIC | WIRING TESTER - AUTOMATED WIRELESS | 1 | |
| UPTC16LT | LIGHTED FLEXIBLE SPRING CLAW, LENGTH 8" | 2 | |
| UPTC16MLT | LED FLBLE MGNETIC SPRING CLAW | 1 | |
| UR 5.4SS-SL | Universal O-ring Scanner Probe, 5.4mm Dia. x 35mm WL, 100KHz-2MHz, Stainless Steel, .059" to coil center | 1 | |
| USA70398 | DEBURRING TOOL KIT | 1 | |
| UT-343E | MEASURING DEVICE FOR COATING AND PAINT THICKNESS | 1 | |
| UV-SP-DM365XA | SPECTRO-UV DM-365XA UV RADIOMETER, INCLUDES 4 NON-RECHARGEABLE 1.5 VOLT ALKALINE BATTERIES, BATTERY LEVEL INDICATOR LIGHT AND CALIBRATION CERTIFICATE. MEASURING RANGE: 0-19,990 MICROWATTS PER CM2 | 1 | |
| UZDK-173-01 | DEVICE FOR POWERING OF ELECTRO HYDRAULIC SERVO UNIT | 1 | |
| V17H | Ionic Systems Vertigo 17 Handle Section With Clamp And Butt Ring | 2 | |
| V21H | Ionic Systems Vertigo 21 Handle Section With Clamp And Butt Ring | 2 | |
| V24H | Ionic Systems Vertigo 24 Handle Section With Clamp And Butt Ring | 2 | |
| V25H | Ionic Systems Vertigo 25 Handle Section With Clamp And Butt Ring | 2 | |
| V28H | Ionic Systems Vertigo 28 Handle Section With Clamp And Butt Ring | 2 | |
| V30H | Ionic Systems Vertigo 30 Handle Section With Clamp And Butt Ring | 2 | |
| V32H | Ionic Systems Vertigo 32 Handle Section With Clamp And Butt Ring | 2 | |
| V35H | Ionic Systems Vertigo 35 Handle Section With Clamp And Butt Ring | 2 | |
| V40H | Ionic Systems Vertigo 40 Handle Section With Clamp And Butt Ring | 2 | |
| V45H | Ionic Systems Vertigo 45 Handle Section With Clamp And Butt Ring | 2 | |
| V55H | Ionic Systems Vertigo 55 Handle Section With Clamp And Butt Ring | 2 | |
| V65H | Ionic Systems Vertigo 65 Handle Section With Clamp And Butt Ring | 2 | |
| V701258B | THREADMEASURING WIRE(0.07217) | 1 | |
| V701258W | THREADMEASURING WIRE(0.07217) | 1 | |
| VAA251I-0377 | CIRCUIT BREAKER RING AND TAG (INOPERATIVE - DO NOT OPERATE) | 1 | |
| VDA1-19 | ASSEMBLY TOOL FOR SEALS AND O-RINGS | 1 | |
| VDV500-063 | TONE AND PROBE WIRING TESTER | 1 | |
| VIKING BIT | DOOR BEARING REMOVAL TOOL | 1 | |
| VM0-118 | BEARING HOLDER | 1 | |
| VP35H | Ionic Systems Vertigo+35 Handle Section With Clamp And Butt Ring | 2 | |
| VP40H | Ionic Systems Vertigo+40 Handle Section With Clamp And Butt Ring | 2 | |
| VP45H | Ionic Systems Handle Section For Vertigo+45 With Clamp And Butt Ring | 2 | |
| VP55H | Ionic Systems Vertigo+55 Handle Section With Clamp And Butt Ring | 2 | |
| VP65H | Ionic Systems Vertigo+65 Handle Section With Clamp And Butt Ring | 2 | |
| VR00356-01-0002 | CLUTCH CENTERING TOOL CD-135 | 1 | |
| VR50167 | BEARING DRIVER | 1 | |
| VTB08050 | BEARING (STANDARD) | 1 | |
| W 61 | LINE VOLTAGE SOLDERING IRON 60 W | 1 | |
| W101E | SOLDERING IRON 115 VOLT 100 WATT | 1 | |
| WAHTTPT35 | FASTENER KIT STUD SPRING CUP | 1 | |
| WCB-116 | ENGINE COWL RING GAP COVER, fully enclosed | 1 | |
| WCI-SD-16-3-N | STARING DRILL | 2 | |
| WDD81V | DESOLDERING STATION | 1 | |
| WDH10 | HOLDER FOR SOLDERING STATION | 1 | |
| WDS510-207500 | LANYARD & RETAINING RING CLIP | 1 | |
| WDS660-203 | SPRING FOR STUD 3/8 | 1 | |
| WE1010 | WELLER SOLDERING STATION | 1 | |
| WE1010NA | SOLDERING STATION | 1 | |
| WELLER PS1100K | GAS SOLDERING IRON | 1 | |
| WELSP40L | SOLDERING IRON 240 VOLTS | 1 | |
| WES 51 | WELLER STATION SOLDERING IRON | 2 | |
| WES51 | SOLDERING STATION | 2 | |
| WESD51D | SOLDERING IRON 60W | 1 | |
| WGLG100 | WURTH SELF IGNITING GAS SOLDERING UNIT | 1 | |
| WLC100 | SOLDERING IRON, 40 W | 1 | |
| WLC200 | ADJUSTABLE TEMPERATURE SOLDERING STATION PERFECT FOR VARIOUS SOLDERING TASKS, FEATURING A 40W IRON. | 1 | |
| WMD-3 | SOLDERING STATION WELLER | 1 | |
| WP-65 | SOLDERING PENCIL FOR SOLDERING STATION | 1 | |
| WPSI12V | BATTERY SOLDERING IRON WELLA | 1 | |
| WR-2006907X101-1-1 | WRENCH ADAPTER - NOSE WHEEL STEERING | 1 | |
| WR-2006907X101-2-1 | WRENCH ADAPTER - STEERING ACTUATOR GLAND | 1 | |
| WR2002 | WEELER SOLDERING STATION | 1 | |
| WR3000M | SOLDERING STATION WELLER | 1 | |
| WR3M | SOLDERING / DESOLDERING STATION | 1 | |
| WRCS | RAPID CURING DEVICE | 1 | |
| WS 81 DE | SOLDERING STATION KIT 80W | 1 | |
| WS200-U1 | FUEL METERING TEST STAND | 1 | |
| WSD81i | SOLDERING STATION KIT 95W | 1 | |
| WSP-80 | SOLDERING PENCIL FOR SOLDERING STATION | 1 | |
| WST 0841 | HELICOIL THREAD REPAIR KIT THREAD REPAIRING WORKSHOP KITS (M5 M6 M8 M10 M12) - 140 PCS | RAPI-COIL® | 1 | |
| WST-A-460 | SONOBUOY FIRING CIRCUIT AND STRAY VOLTAGE TESTER | 1 | |
| WSTA6 | GAS SOLDERING IRON | 1 | |
| WT1010 "WE1010EDU" | SOLDERING STATION | 1 | |
| WTCP-51 | SOLDERING STATION | 2 | |
| WTQB 1000 | SOLDERING STATION | 1 | |
| WXD 2 CONTROL UNIT | 230V UK F/G WELLER DESOLDERING STATION | 1 | |
| WXD2020 | SOLDERING STATION | 1 | |
| WXD2020N | SOLDERING STATION | 1 | |
| X181P4202101 | TAIL ROTOR HEAD BEARING CLEARANCE MEASURING TOOL | 1 | |
| XB1214A | STANDARD DOUBLE RING SPANNER | 1 | |
| XB1618A | STANDARD DOUBLE RING SPANNER | 1 | |
| XB2022A | STANDARD DOUBLE RING SPANNER | 1 | |
| XB2426A | STANDARD DOUBLE RING SPANNER | 1 | |
| XB2830A | STANDARD DOUBLE END SPRING SPANNER | 1 | |
| XB3440A | DOUBLE ENDED RING SPANNER 1 1/4" x 1 1/16" | 4 | |
| XBA24MA143A | HOODIE SPRING PACK A | 1 | |
| XBA24MA143B | HOODIE SPRING PACK B | 1 | |
| XBA24MA143C | HOODIE SPRING PACK C | 1 | |
| XCL2 | Needle Nose Spring Clamps (Jaw reach: 2" (51 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Add To Cart) | 1 | |
| XCL5 | Needle Nose Spring Clamps (Jaw reach: 2" (51 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Add To Cart) (Jaw reach: 4" (102 mm)) (Jaw gap: 3" (76 mm)) (Add to cart: Add To Cart) | 1 | |
| XCR-4PC | 4 PC Round Jaw Ratchet Spring (Jaw reach: 2-1/2" (64 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Item is no longer available.) | 1 | |
| XCRU3 | Square Jaw Ratchet Spring Clamps (Jaw reach: 2" (51 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Add To Cart) | 1 | |
| XCRU5 | Square Jaw Ratchet Spring Clamps (Jaw reach: 2" (51 mm)) (Jaw gap: 2" (51 mm)) (Add to cart: Add To Cart) (Jaw reach: 4" (102 mm)) (Jaw gap: 4" (102 mm)) (Add to cart: Add To Cart) | 1 | |
| XHB-3000+CCD | Automatically Image Measuring Digital Brinell Hardness Tester | 1 | |
| XID1618A | RING KEY (XID1618A ¼ ⁕ 9/32) | 1 | |
| XK27073 | MEASURING TOOL, BLEND, SLAT TRACK | 1 | |
| XO810 | DOUBLE RING WRENCH, STANDARD LENGTH DEEP 60O OFFSET, 12 POINT, SIZE 1/4"X5/16&RDQUO; | 1 | |
| XPT-DAA-MON-UPG-AL-SUS | XPT-DAA-MON-UPG-AL-SUS;Upgrade from XPERTrak DAA Spectrum to DAA Monitoring - Annual License | 1 | |
| XPT-DAA-MONITOR | XPT-DAA-MONITOR;XPERTrak DAA software for sweep and live spectrum and spectrum monitoring | 1 | |
| XPT-DAA-MONITOR-AL-SUS | XPT-DAA-MONITOR-AL-SUS;XPERTrak DAA support for sweep and live spectrum and spectrum monitoring | 1 | |
| XPT-DAA-MONITOR-UPG | XPT-DAA-MONITOR-UPG;Upgrade from XPERTrak DAA Spectrum to DAA Monitoring | 1 | |
| XPT-NITRO-CONNECTOR-AL | XPT-NITRO-CONNECTOR-AL;Annual offering for NITRO Connector-Sold in quantities of 1k modems each | 1 | |
| XS1214A | STANDARD OFFSET END SPRING SPANNER | 3 | |
| XV3-50 | Bessey® VarioClippix® Sliding Arm Spring Clamps (Jaw gap: 2-1/8" (54 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Single Sliding Arm) (Add to cart: Add To Cart) | 1 | |
| XV5-100 | Bessey® VarioClippix® Sliding Arm Spring Clamps (Jaw gap: 2-1/8" (54 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Single Sliding Arm) (Add to cart: Add To Cart) (Jaw gap: 4" (102 mm)) (Jaw reach: 2" (51 mm)) (Type: Single Sliding Arm) (Add to cart: Add To Cart | 1 | |
| XV5-170 | Bessey® VarioClippix® Sliding Arm Spring Clamps (Jaw gap: 2-1/8" (54 mm)) (Jaw reach: 1-1/2" (38 mm)) (Type: Single Sliding Arm) (Add to cart: Add To Cart) (Jaw gap: 4" (102 mm)) (Jaw reach: 2" (51 mm)) (Type: Single Sliding Arm) (Add to cart: Add To Cart | 1 | |
| YA 456 | SOLDERING ACCESSORIES | 1 | |
| YA-01250 | DEBURRING TOOL | 1 | |
| YA-01562 | DEBURRING TOOL | 1 | |
| YA-01875 | DEBURRING TOOL | 1 | |
| YA1175-3 | SPRING HOOKS 1 RED 1 BLACK | 1 | |
| YA145-2 | Pick - O-Ring, 90-Degree Tip | 6 | |
| YA160A | HEARING BAND | 1 | |
| YA188LR-4 | PRESSED BEARING AND NUT | 1 | |
| YA4008-5 | O-RING AND SEAL KIT | 1 | |
| YA477A | SOLDERING SUCKER | 1 | |
| YA700B8 | WASHER AND RETAINING RING | 1 | |
| YA742 | BEARING PACKER, PRESSURIZED (9/16" ID MI | 2 | |
| YA750 | NOZZLE, MLG LUBRICATING NEEDLE COUPLER, EXTENSION, MLG LUBRICATION COUPLER, NEEDLE NOZZLE, MLG LUBRICATION FITTING - LUBRICATION - AFT WHEEL WELL BULKHEAD SPHERICAL BEARING GUN - GREASE | 5 | |
| YA756 | NOZZLE, MLG LUBRICATING NEEDLE COUPLER, EXTENSION, MLG LUBRICATION COUPLER, NEEDLE NOZZLE, MLG LUBRICATION FITTING - LUBRICATION - AFT WHEEL WELL BULKHEAD SPHERICAL BEARING GUN - GREASE | 2 | |
| YA761 | NOZZLE, MLG LUBRICATING NEEDLE COUPLER, EXTENSION, MLG LUBRICATION COUPLER, NEEDLE NOZZLE, MLG LUBRICATION FITTING - LUBRICATION - AFT WHEEL WELL BULKHEAD SPHERICAL BEARING GUN - GREASE | 2 | |
| YA9140A-5 | DETENT RING PIN 1/4 X 1 | 1 | |
| YA9141 | VALVE SPRING CMPRSR UPDATE KIT | 1 | |
| YAK10 | BUTANE SOLDERING IRON | 1 | |
| YAKS226 | 3/32IN DBLE FLAT SOLDERING TIP | 1 | |
| YAKS227 | 1/8IN DBLE FLAT SOLDERING TIP | 1 | |
| YAKS228 | 3/16IN DBLE FLAT SOLDERING TIP | 1 | |
| YAKS22A | SOLDERING IRON | 2 | |
| YAKS300 | KIT,BUTANE SOLDERING IRON (50 WATTS) | 1 | |
| YAKS41 | BUTANE SOLDERING IRON KIT-RED | 1 | |
| YAKS41-4PK | BUTANE SOLDERING KIT-4PK RED | 1 | |
| YAKS41-4PKC | BUTANE SOLDERING KIT-4PK COLOR | 1 | |
| YAKS41G | BUTANE SOLDERINGIRON KIT/GREEN | 1 | |
| YAKS41HV | BUTANE SOLDERINGIRON KIT/HI-VZ | 1 | |
| YAKS41O | BUTANE SOLDERINGIRON KIT/ORNGE | 1 | |
| YAKS42 | BUTANE SOLDERING IRON KIT | 1 | |
| YAKS42G | BUTANE SOLDERING IRON KIT GRN | 1 | |
| YAKS42HV | BUTANE SOLDERING IRON KT HIVIS | 1 | |
| YAKS42O | BUTANE SOLDERING IRON KIT ORG | 1 | |
| YAS41 | BUTANE SOLDERING IRON-RED | 1 | |
| YAS41G | BUTANE SOLDERING IRON- GREEN | 1 | |
| YAS41HV | BUTANE SOLDERING IRON- HI-VIZ | 1 | |
| YAS41O | BUTANE SOLDERING IRON-ORANGE | 1 | |
| YAS42 | BUTANE SOLDERING IRON | 1 | |
| YAS42G | BUTANE SOLDERING IRON GREEN | 1 | |
| YAS42HV | BUTANE SOLDERING IRON HI VIS | 1 | |
| YAS42O | BUTANE SOLDERING IRON ORANGE | 1 | |
| YH-192 | CALIBRATION DEVICE FOR TEMPERATURE MEASUREMENT, SOLDERING IRON TIP | 1 | |
| Z-1063-06 | RING, BEADBREAKER, 6 | 1 | |
| Z-1063-07 | RING, BEADBREAKER, 7 | 1 | |
| Z-1063-08 | RING, BEADBREAKER, 8 | 2 | |
| Z-1063-09 | RING, BEADBREAKER, 9 | 2 | |
| Z-1063-10 | RING, BEADBREAKER, 10 | 1 | |
| Z-1063-11 | RING, BEADBREAKER, 11 | 3 | |
| Z-1063-12 | RING, BEADBREAKER, 12 | 1 | |
| Z-1063-13 | RING, BEADBREAKER, 13 | 6 | |
| Z-1063-14 | TIRE BEAD BREAKER RING - MAIN WHEEL ADAPTER | 3 | |
| Z-1063-15 | TIRE ADAPTER RING, MAIN | 3 | |
| Z-1063-16 | TIRE ADAPTER RING, MAIN | 2 | |
| Z-1063-17 | RING, BEADBREAKER, 17 | 6 | |
| Z-1063-18 | RING, BEADBREAKER, 18 | 3 | |
| Z-1063-19 | RING, BEADBREAKER, 19 | 5 | |
| Z-1064-06 | RING, BEADBREAKER, 6 | 2 | |
| Z-1064-07 | RING, BEADBREAKER, 7 | 2 | |
| Z-1064-08 | RING, BEADBREAKER, 8 | 2 | |
| Z-1064-09 | RING, BEADBREAKER, 9 | 1 | |
| Z-1064-10 | RING, BEADBREAKER, 10 | 3 | |
| Z-1064-11 | RING, BEADBREAKER, 11 | 3 | |
| Z-1064-12 | RING, BEADBREAKER, 12 | 3 | |
| Z-1064-13 | TIRE ADAPTER RING, NOSE | 3 | |
| Z-1064-14 | RING, BEADBREAKER, 14 | 4 | |
| Z-1064-15 | RING, BEADBREAKER, 15 | 3 | |
| Z-1064-16 | TIRE ADAPTER RING, MAIN | 3 | |
| Z-1064-17 | RING, BEADBREAKER, 17 | 2 | |
| Z-1064-18 | RING, BEADBREAKER, 18 | 2 | |
| Z-1064-19 | RING, BEADBREAKER, 19 | 2 | |
| Z-1064-20 | RING, BEADBREAKER, 20 | 2 | |
| Z-3072-20 | RING, BEADBREAKER, 20 | 3 | |
| Z-3072-22 | RING, BEADBREAKER, 22 | 2 | |
| Z1063-08 | RING: COMPRESS,BEADBREAKER 8, | 2 | |
| Z1063-09 | RING: COMPRESS,BEADBREAKER, W/O CHINES | 2 | |
| Z1063-11 | RING: COMPRESS,BEADBREAKER, W/O CHINES | 3 | |
| Z1063-13 | RING, BEADBREAKER NLG | 6 | |
| Z1063-16 | RING, BEADBREAKER, 16 | 2 | |
| Z1063-17 | RING, MLG BEADBREAKER | 6 | |
| Z1063-18 | BEADBREAKER RING | 3 | |
| Z1063-19 | RING, BEADBREAKER, MLG | 5 | |
| Z1064-08 | TRE ADPATER RING | 2 | |
| Z1064-11 | BEAD BREAKER RING-NOSE GEAR | 3 | |
| Z1064-13 | TYRE RING ADAPTOR | 3 | |
| Z1064-15 | RING: COMPRESS,BEADBREAKER, W/CHINES | 3 | |
| Z1064-16 | BEAD BREAKER RING | 3 | |
| Z3072-20 | RING: COMPRESS,BEADBREAKER | 3 | |
| Z3072-22 | RING: COMPRESS,BEADBREAKER | 2 | |
| ZARZ0041-1 | SEAL, O-RING - VITON (FLUOROCARBON) - BRAND: MEGGITT | 1 | |
| ZAXN2052 | THRUST ROLLER BEARING ¿52mmOD X ¿20mmID | 1 | |
| Z−1063−17 | Main Wheel Adapter Ring | 6 | |
| Z−1064−13 | Nose Wheel Adapter Ring | 3 | |
| f 71313-10 | Socket Wrench Rod Bearing | 2 | |
| f 71313-12 | Socket Wrench Rod Bearing | 2 | |
| f 71313-16 | Socket Wrench Rod Bearing | 2 | |
| f 71313-8 | Socket Wrench Rod Bearing | 3 | |
| f 80018-1 | MLG FWD trunion bearing | 17 | |
| f 80162-1 | clamb nose gear stering actr rod | 16 | |
| f 80169-1 | spring expander set MLG | 15 | |
| f71313-10 | Socket Wrench Rod Bearing | 2 | |
| f71313-12 | Socket Wrench Rod Bearing | 2 | |
| f71313-16 | Socket Wrench Rod Bearing | 2 | |
| f71313-8 | Socket Wrench Rod Bearing | 3 | |
| f80162-1 | clamb nose gear stering actr rod | 16 | |
| f80169-1 | spring expander set MLG | 15 | |
| gse196-ltc52073 | COMPRESSOR, SPRING ROD-OVERWING EMER-GENCY DOOR | 1 | |
| lC5702 | PUSHER- NO 6 BEARING AND SEAL RACE | 1 | |
| 45NX09 | DEBURRING TOOL | 1 | |
| 80T2341 | SPECIAL BEARING UPPER BLOCKER DOOR | 1 | |
| 91589 | RADIO INTERFERENCE MEASURING SET (SEE REMARKS) | 1 | |
| 997112 | HIGH LOW TEMPERATURE RTD WIRING HARNESS WITH 4 POSITION CONNECTOR | 3 | |
| AC21892000 | TOOL FOR BEARING CUPS REMOVAL FROM THE INNER AND OUTER WHEEL HALVES | 6 | |
| OSD752 | SOCKETS, RMV/INSTL - FLAP AND FLAP FAIRING | 1 | |
| Ð?Ð-117Ð? | WORKING CONDITION MEASURING INSTRUMENT | 6 | |
| Ð?Ð -117Ð? | Working condition measuring instrument | 6 | |
| В78017-1 | INSTALLATION EQPT - BEARING-LEAD SCREW, T/R NONLOCKING ACTUATOR ASSY | 1 | |
| КHC‑4006 | TRONAIR (USA) RINGING AND VENTING CONNECTORS - 58331 (56331) | 1 | |
| 97A27302010000 | MEASURING EQUIPMENT,USED TO MEASURE THE | 2 | |
| 97A32302001000 | TOOL,LOAD MEASURING | 2 | |
| 97A76102003000 | SPRING SCALE ADAPTER,THROTTLE CONTROL LE | 8 | |
| 98A27303002000 | CENTERING BULLETS AND PINS,ELEVATOR HING | 8 | |
| 98A27504030001 | SPANNER,FORWARD BEARING RETAINING RING,F | 3 | |
| 98A28109008000 | PROTECTIVE RING,USE TO PROTECT THE EDGES | 3 | |
| 98A28109009000 | PROTECTIVE RING,USE TO PROTECT THE EDGES | 4 | |
| 98A28109010000 | PROTECTIVE RING,USE TO PROTECT THE EDGES | 3 | |
| 98A28109011000 | PROTECTIVE RING,USE TO PROTECT THE EDGES | 4 | |
| 98A28109012000 | PROTECTIVE RING,USE TO PROTECT THE EDGES | 3 | |
| 98A28109013000 | PROTECTIVE RING,STABILIZER NACA DACT,USE | 3 | |
| 98A32503503000 | GRADUATED DRUM,NOSE WHEEL STEERING CONTR | 4 | |
| 98A54003094000 | CHAMFERING TOOL,WING AND PYLON FITTING,R | 9 | |
| 98A76103004000 | ADAPTER,SPRING SCALE,T/R CONTROL LEVER | 5 | |
| PWA28462 | GAGE POSITION GEARBOX CSD TRANS, RING | 3 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
