| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C22005-32 | CABLE TOOL | 5 | |
| PWC90025-03 | Cable Tool | 4 | |
| PWC90025-07 | Cable Tool | 3 | |
| SCT325 | CABLE TOOL | 2 | |
| SCT327 | CABLE TOOL | 5 | |
| SCTR325 | CABLE TOOL | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98S27005016000 | TOOL CABLE TENSION REGULATOR pre-mod.2634 | 1 | |
| (CALIB) SCT327 | SAFE T CABLE TOOL 7IN HOSE (CALIBRATION) (CALIBRATION) | 1 | |
| 04-2 | CABLE SWAGING TOOL FOR 1/16,3/32,1/8 CABLE | 1 | |
| 0455-8120895 | SAFE-T-CABLE TOOL | 1 | |
| 06383 | PANDUIT CABLE,NYLON-STRAPPING TOOL | 1 | |
| 06ADV380A | Mitutoyo 06ADV380A IP USB Input Tool Direct Cable straight with Data Pushbutton (2m) | 1 | |
| 06ADV380B | Mitutoyo 06ADV380B IP USB Input Tool Direct Cable back side with Data Pushbutton (2m) | 1 | |
| 06ADV380E | Mitutoyo 06ADV380E USB Input Tool Direct cable round (2m) | 1 | |
| 06ADV380G | Mitutoyo 06ADV380G IP Input Tool Direct cable (2m) | 1 | |
| 099TL234-1 | CABLE ALIGNMENT CAGE TOOL #10 | 1 | |
| 0U190857 | TEST TOOL-RELEASE CABLE | 28 | |
| 1-490 | CABLE TIE TOOL | 1 | |
| 104-6877 | Crimping tool for coax cables | 1 | |
| 12 | TOOL-CABLE TENS ( 40-600 LB ) | 3 | |
| 606.7803 | FLOAT SYSTEM PULL CABLE TEST TOOL | 2 | |
| 607.1602 | EFS PULL CABLE TEST TOOL. | 1 | |
| 1551 | KABELEX CABLE EXTRACTOR TOOL | 1 | |
| 1552 | KABELEX CABLE EXTRACTOR TOOL | 1 | |
| 1556 | 1556-KABELEX CABLE TOOL | 1 | |
| 1562 | CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 1578 | 1578-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 1587 | CABLE EXTRACTOR TOOL KABELEX | 8 | |
| 1591 | KABELEX CABLE TOOL | 1 | |
| 2024 | TOOL - INSTALLATION (APPLICABLE TO ALL MODELS WITH 140N2022 FUSELAGE REMOVABLE DRAIN VALVES) (MINIMUM ORDER OF 10 REQU (STEWART INDUSTRIES, INC.) | 10 | |
| 2025 | TOOL - LOCATOR, FOR P/N 140N2021-1 DRAIN VALVE RETAINERS (APPLICABLE TO ALL MODELS FOR A/C WITH REMOVABLE DRAIN VALVES) (STEWART INDUSTRIES, INC.) | 2 | |
| 121475 | PLASTIC CABLE TIE CUTTING TOOL, 2.2-4.8, UNIFOX-CT | 1 | |
| 177065 | CABLE CRIMPING TOOL | 1 | |
| 6067803 | FLOAT SYSTEM PULL CABLE TEST TOOL | 2 | |
| 1100954036 | TOOL - CABLE REPAIR EQUIPMENT MAT | 1 | |
| 11101-SCHWAB | TOOL 220V CABLE EXTENSIONS 20 METERS | 1 | |
| 1159SEM20047-1 | CABLE DISCONNECT 3/32 INCH TOOL ASSEMBLY | 1 | |
| 12-00833 | CABLE RIGGING TOOL | 1 | |
| 12-04571 | SAFETY CABLE 7 NOSE TOOL | 1 | |
| 12245-060-001 | AILERON CABLE RIGGING TOOL | 2 | |
| 1226HW | RIGGING TOOL KIDRIG CABLE RIGGING TOOL | 1 | |
| 12R356 | Bench Swaging Tool, Cable Size 1/16-3/16 | 1 | |
| 14-3000044 | Power Tool Cable 6 Pin - Length 16.4 ft. (for EF, LF, BF, NF, HF, K, A, CL, SS & BL-Series) | 1 | |
| 14-3000045 | Coiled Power Tool Cable 6 Pin - Length 16.4ft. (for EF, LF, BF, NF, HF, K, A, CL SS & BL-Series) | 1 | |
| 14-PELZ932A | Power Tool Cable 6 Pin - Length 9.8 ft. (for EF, LF, BF, NF, HF, K, A, CL, SS & BL-Series) | 1 | |
| 169415-1 | CABLE CUTTER TOOL | 1 | |
| 19294-0002 | Economy Cable Tie Tool | 1 | |
| 2024215-2 | CABLE, DMM INTERFACE USB TOOL | 1 | |
| 2024215-3 | CABLE, DMM INTERFACE USB TOOL | 2 | |
| 216A3927P0001 | SAFETY CABLE TOOL, 7" | 1 | |
| 28-0-4236 | TOOL RIGGING THRUST REV CABLES | 2 | |
| 3170053-004 | TOOL, TEST SET, DNS WITH CABLES AND CASE | 1 | |
| 3192-124 | CABLE STRIP TOOL | 1 | |
| 35-053 | CABLE CUTTERS TOOL | 1 | |
| 35M5M01160001 | SETTING TOOL - MICROSWITCH UNIT OR CABLE ADAPTER PLUG & OHMMETER (RANGE >1K OHM) | 2 | |
| 360-0271-400 | ADAPTION CABLE TOOL | 1 | |
| 3G6400G00231 | TOOL, T/R SLIDER BUSHING REMOVAL (APPLICABLE FOR SLIDER BUSHING PN 3G6430V00253) | 1 | |
| 3G7160G00131 | TOOL WAVEFORM GENERATOR CONNECTING CABLE | 1 | |
| 41-990 | CABLE TIE TOOL | 5 | |
| 41-995 | HEAVY DUTY CABLE TIE TOOL | 4 | |
| 42325-980 | CABLE INSPECTION TOOL (OEM GOODRICH) | 1 | |
| 42325-988 | CROWDER TOOL FOR HOIST CABLE REPLACEMENT | 1 | |
| 45-128 | Swivel Blade® Cable Slitter and Ringing tool | 2 | |
| 45-2020-1 | STRIPPING TOOL BLADES / DIES FOR AIRBUS CF CABLE AWG 26-16 | 5 | |
| 49900-889-104 | HOIST CABLE LOAD CHECK TOOL | 3 | |
| 51C1095-1 | CABLE (NLA/PART OF TOOL PN PF51-008-1) | 1 | |
| 5502026A00 | COAXIAL CABLE TEST TOOL | 1 | |
| 5L32 SERIES | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA SCT323 | 1 | |
| 60-3414-1 | TEST CABLE TOOL FOR LIGHT 30-1685-1 | 1 | |
| 606-7803 | EFS PULL CABLE TEST TOOL (DART) | 2 | |
| 61355665AA | FLAT CABLE DISASSEMBLY TOOL | 1 | |
| 62100-2200 | Manual Press with IDT Ribbon Cable Tool Kit | 1 | |
| 62100-6700 | Cable Punch and Termination Tool for LED Cable Connector | 1 | |
| 62201-6600 | Ribbon Cable Tool Kit, Press Not Included | 1 | |
| 62203-0623 | Strip Slug Pulling Tool for 1/0 AWG Cable | 1 | |
| 63817-0100 | Manual Ribbon Cable Cutter Hand Tool | 1 | |
| 63817-0200 | Manual Cable Cutter Hand Tool – 8awg to 4.80mm² (1000 MCM) | 1 | |
| 63817-0300 | Heavy Duty Cable Stripping Tool suitable for cable diameters up to 40.00mm | 1 | |
| 63817-0400 | Precision Stripper Tool suitable for cable diameters up to 11.00mm | 1 | |
| 63819-9000 | Hand Crimp Tool for Cable Seal Crimp Terminals | 1 | |
| 63819-9100 | Hand Crimp Tool for Cable Seal Crimp Terminals | 1 | |
| 63819-9200 | Hand Crimp Tool for Cable Seal Crimp Terminals | 1 | |
| 63819-9300 | Hand Crimp Tool for Cable Seal Crimp Terminals | 1 | |
| 63823-9000 | Hand Crimp Tool For SATA Power Cable Crimp Receptacles | 1 | |
| 63823-9900 | Hand Crimp Tool For SATA Power Cable Crimp Receptacles | 1 | |
| 69008-1184 | Handtool for Telecom Plug, Type C Crimp with Diameter 6.0 Cable | 1 | |
| 69008-1192 | Handtool for Telecom Plug, Type C Crimp with Diameter 6.0 Cable | 1 | |
| 6ASA | CABLE BALL LOADING TOOL | 1 | |
| 7010573-901 | ELEVATION DRIVE CABLE ADJUSTMENT TOOL | 1 | |
| 701286-1 | TEST CABLE TOOL STROBE LIGHT | 1 | |
| 701286-2 | TEST CABLE TOOL | 1 | |
| 703A97-6702-001 | ENGINE CHEKING TOOLS (ICO 13-70-10-01) CABLE,RED0001-999 | 1 | |
| 704-3058-002 | HARNESS (CABLE FOR TOOL 69001074-060) | 1 | |
| 70452 | Turnbuckle Wrench Cable Rigging Tool (Description: Cable Rigging Tool) (Add to cart: Add To Cart) | 1 | |
| 71600-103 | LACING COVER CABLE RIGGING TOOL | 1 | |
| 74-Z-0-0-478 | TOOL - STRIPPING (FOR KW CABLE) | 1 | |
| 80955-1 | TOOL - CABLE ADAPTER PORT UNIT | 5 | |
| 8500-29A R/B 8500-29B | CRIMPING TOOL ELECTRICAL CABLE | 1 | |
| 856A1616G02 | TOOL: TOOL,CABLE ASSY FOR | 17 | |
| 856A1700G05 | CABLE ASSY (TOOL) | 7 | |
| 965042 | TOOL - HOLDING, ELEVATOR CONTROL CABLE TENSION REGULATOR | 1 | |
| 74610028 | 1578-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 74610039 | 1589K-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 74612006 | 1556-1-CABLE EXTRACTOR TOOL | 1 | |
| 74612028 | 1578K-2-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 74615027 | 1577-1-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 74620001 | 1551-KABELEX CABLE EXTRACTOR TOOL | 1 | |
| 74620004 | 1554-KABELEX CABLE EXTRACTOR TOOL | 1 | |
| 74620005 | 1555-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 74620006 | 1556-KABELEX CABLE TOOL | 1 | |
| 74620007 | 1557-KABELEX CABLE TOOL | 1 | |
| 74620008 | 1558-KABELEX CABLE EXT TOOL | 1 | |
| 74620009 | 1559-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 74620012 | 1562-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 74620024 | 1574-KABELEX CABLE TOOL | 1 | |
| 74620025 | 1575-KABELEX CABLE TOOL | 1 | |
| 74620027 | 1577-KABELEX CABLE EXTRACTOR TOOL | 1 | |
| 74620034 | 1584-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 74620035 | 1585-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 74620037 | 1587-CABLE EXTRACTOR TOOL KABELEX | 1 | |
| 74620041 | 1591-KABELEX CABLE TOOL | 1 | |
| 74640002 | 1552-KABELEX CABLE EXTRACTOR TOOL | 1 | |
| 980-101-000-011 | TOOL-DATA LOAD CABLE | 2 | |
| 98A24403000000 | CABLE HOLDING STRAP TOOL | 30 | |
| 98A27003001000 | RUDDER RIG PIN CABLE QUAD FR42 TOOL | 29 | |
| 98A27108014000 | CABLE DRUM DIFF DROP TOOL | 8 | |
| 98A27307541000 | RIG PIN CABLE QUADRANT TOOL | 10 | |
| 98A27307545000 | CABLE QUAD RIG PIN TOOL | 8 | |
| 98DNSA20206060 | TEST TOOL - RELEASE CABLE , ESCAPE SLIDERIGGING PIN | 28 | |
| 98F27003500000 | LOCKING TOOL - CABLE | 12 | |
| 98F27108294000 | LOCKING TOOL - CABLE | 4 | |
| 98F27207516000 | TOOL PIN - LOCKING, CABLE QUADRAT | 16 | |
| 98S27005016000 | TOOL- CABLE TENSION REGULATOR | 2 | |
| 99127-1000 | TOOL-CABLE-ELECT-PWR-SPP, PNEUM TEST SYSTEM | 1 | |
| A20005-9 | CLAMP - CONTROL CABLE TOOL | 21 | |
| A24007-1 | ELECTRICAL GROUND POWER CABLE (CONTROL TOOL) | 10 | |
| A26001-131 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-134 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
| A26001-135 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 7 | |
| A26001-136 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-137 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-138 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-139 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-144 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-145 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-148 | ADAPTER CABLE - CARGO FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR THE REQUIRED CABLE(S)) | 5 | |
| A26001-175 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 6 | |
| A26001-176 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-192 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 5 | |
| A26001-24 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 4 | |
| A26001-4 | ADAPTER CABLE - ENGINE/APU FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 1 | |
| A26001-5 | ADAPTER CABLE - ENGINE FIRE BOTTLE SQUIB (REFER TO USAGE TABLE IN THE A26001 TOOL DRAWING FOR REQUIRED CABLES) | 2 | |
| A38010-1 | TOOL - TEST CABLE | 1 | |
| A38010-45 | TOOL - TEST CABLE | 6 | |
| A71011-101 | B767 CABLE ASSEMBLY TOOL | 5 | |
| AB52001-SS9 | TEST TOOL - RELEASE CABLE , ESCAPE SLIDE | 1 | |
| ACM 600 | TOOL-CABLE TENS ( 40-600 LB ) | 6 | |
| ACM-600 | TOOL-CABLE TENS ( 40-600 LB ) | 6 | |
| ACM600 | TOOL-CABLE TENS ( 40-600 LB ) | 6 | |
| AGE14582 | (TWO-SWITCH) COMMUNICATIONS CABLE (SLAT/FLAP CONTROLLER FIELD SOFTWARE TOOL) | 1 | |
| AT508K | Cable pliers ( or an alternative tool ) | 6 | |
| AT520-CT | CABLE TERMINAL PULL TESTER TOOL | 1 | |
| AT520JK | SWAGING CABLE TOOL | 7 | |
| ATI520JK | SWAGING CABLE TOOL | 5 | |
| B096P14J2N | TOOLEAGUE 10 INCHES CABLE CUTTER | 1 | |
| B27022 | HOLDING TOOL - ELEV CABLE TENSION REG. RIGGING | 1 | |
| B27022 REV B | HOLDING TOOL - ELEV CABLE TENSION REG. RIGGING | 1 | |
| B27022-16 | HOLDING TOOL - ELEVATOR CABLE TENSION REGULATOR RIGGING | 3 | |
| B27022-4 | HOLDING TOOL - ELEVATOR CABLE TENSION REGULATOR RIGGING | 3 | |
| B52022 | MEASUREMENT TOOL -0 EMERGENCY POWER RSVR, CABLE | 1 | |
| B52022-1 | DOOR CABLE TRAVEL TOOL | 3 | |
| B52022-21 | MEASUREMENT TOOL - EMERGENCY POWER RESERVOIR, CABLE TRAVEL | 8 | |
| B57003-33 | Measurement tool-emergency power rsvr.cable travel | 11 | |
| BCT1050 | BRAKE CABLE RELEASE TOOL | 1 | |
| BM-325 | WIRE LOCKING SAFETY CABLE TOOL | 1 | |
| BM20 | TOOL - INSTALLATION, SAFETY CABLE, 0.020 INCH DIA | 1 | |
| BM202 | TOOL - INSTALLATION, SAFETY CABLE, 0.020 INCH DIA | 1 | |
| BM203 | SAFETY CABLE TERMINATOR TOOL - 0.020 X 3 INCH | 3 | |
| BM3-23 | SAFETY CABLE TERMINATOR TOOL - 0.032 X 3 INCH | 4 | |
| BM323 | SAFETY CABLE TERMINATOR TOOL - 0.032 X 3 INCH | 4 | |
| BM323 | TOOL, CRIMPING SAFETY CABLE | 4 | |
| BM325 | WIRE LOCKING SAFETY CABLE TOOL | 1 | |
| BM327 | SAFETY CABLE TERMINATOR TOOL - 0.032 X 7 INCH | 5 | |
| BM403 | SAFETY CABLE TOOL | 1 | |
| C0043B | TOOL-CABLE PULLEY RIGGING | 1 | |
| C0259 | PANDUIT CABLE,NYLON-STRAPPING TOOL | 1 | |
| C33001-1 | SPL-13463 BSI LIGHT CABLE TESTING TOOL | 2 | |
| CABLE RIGGING TOOL | CABLE RIGGING TOOLS | 1 | |
| CABLE-ADTS505 | CABLE ADTS505 P/S TESTSET TOOL | 1 | |
| CABLE-CUTTER | AVIONIC CABLE TOOL | 1 | |
| CORDONROUGE1 | ENGINE CHEKING TOOLS (ICO 13-70-10-01) CABLE,BLACK0001-99 | 1 | |
| D0733014603 | SAFETY CABLE APPLICATION TOOL | 1 | |
| D8913 | RELEASE CABLE TOOL, ESCAPE SLIDE | 1 | |
| DANDMC10004R | SAFE-T-CABLE KIT/W ROTARY TOOL | 1 | |
| DANSCTN32-3 | 3IN NOSE ASSY FOR CABLE TOOL | 1 | |
| DANSCTR207 | ROTARY SAFE-T-CABLE TOOL .022 | 1 | |
| DANSCTR323 | SAFE-T CABLE TOOL W 3IN NOSE | 1 | |
| DANSCTR327 | ROTARY SAFE-T-CABLE TOOL .032 | 1 | |
| DMC 1000-4R | .032 SAFE-T-CABLE KIT /W ROTARY TOOL | 7 | |
| DMC 728 | INSERTION & REMOVING CABLE/ WIRE TOOL SET | 3 | |
| DMC1000 | DMC1000 .032 Safe-T-Cable Application Tool Kit | 2 | |
| DMC1000-11 | DMC1000-11 - .040 Safe-T-Cable Application Tool Kit | 2 | |
| DMC1000-11R | KIT, SAFETY CABLE TOOL AND PARTS (.040) | 5 | |
| DMC1000-19 | DMC1000-19 - .032 & .040 Safe-T-Cable Application Tool Kit | 2 | |
| DMC1000-19R | DMC1000-19R .032 & .040 Rotary Safe-T-Cable Application Tool Kit | 2 | |
| DMC1000-20 | DMC1000-20 - .022 & .032 Safe-T-Cable Application Tool Kit | 2 | |
| DMC1000-20R | DMC1000-20R - .022 & .032 Rotary Safe-T-Cable Application Tool Kit | 7 | |
| DMC1000-4 | DMC1000-4 - .032 Safe-T-Cable Application Tool Kit with Test Block | 2 | |
| DMC1000-4R | SAFE-T-CABLE ROTARY TOOL KIT (.032) | 7 | |
| DMC1000-4R | KIT, SAFETY CABLE ROTARY TOOL ( | 7 | |
| DMC1000-4RINC | DMC1000-4RINC - .032 Safe-T-Cable Application Tool Kit with Inconel Cable | 2 | |
| DMC1000-6 | DMC1000-6 - .032 Safe-T-Cable Start Up Tool Kit | 2 | |
| DMC1000-625 | DMC1000-625 - .062 Safe-T-Cable Application Tool Kit with Hydraulic Tool | 2 | |
| DMC1000-6R | DMC1000-6R - .032 Rotary Safe-T-Cable Application Tool Kit | 2 | |
| DMC1000???20R | SAFETY CABLE TOOL AND PARTS KIT | 7 | |
| DMC1000R | DMC1000R- .032 Rotary Safe-T-Cable Application Tool Kit | 1 | |
| DMC1000−20R | Safety Cable Tool and Parts Kit | 7 | |
| DMC1001 | DMC1001 - .022 Safe-T-Cable Application Tool Kit | 2 | |
| DMC1001-7 | DMC1001-7 - .022 Safe-T-Cable Application Tool Kit | 2 | |
| DMC1001-7R | DMC1001-7R - .022 Rotary Safe-T-Cable Application Tool Kit | 2 | |
| DMC1001-7RINC | .022" Adjustable Tension Safe-T-Cable® Application Tool Kit with Inconel Cable | 2 | |
| DMC1001-7RR | DMC1001-7RR - .022 Rotary Safe-T-Cable Kit Application Tool Kit with SCT-TB1R | 2 | |
| DMC1001-8 | DMC1001-8 - .022 Safe-T-Cable Application Tool Kit without Cable | 2 | |
| DMC1002-24 | Safe-T-Cable Tool Kit | 2 | |
| DMC1007 | .032" Safe-T-Cable Application Tool Kit with .022" & .032" Noses | 2 | |
| DMC1007-28 | DMC1007-28 - Safe-T-Cable Application Tool Kit for .022”, .032” and .040” Safe-T-Cable Applications | 2 | |
| DMC1007-28R | Safe-T-Cable Application Tool Kit for .022", .032" and .040" Safe-T-Cable Applications | 5 | |
| DMC5033 | Tool Kit with EMC3300, 6 Nest & Indent Dies, & Applicable Gages (DMC5000 Series) | 1 | |
| DMC728 | INSERTION & REMOVING CABLE / WIRE TOOL SET | 3 | |
| DMC99 | SWAGING CABLE TOOL | 4 | |
| DRK56-0 | POWER FEEDER CABLE REMOVAL TOOL | 3 | |
| DZZ7347-1 | RIGGING TOOL CONTROL BUS CABLE FLAP | 1 | |
| DZZ7465-3 | TOOL, CABLE | 1 | |
| DZZ7465-4 | TOOL, CABLE | 1 | |
| ELECTRIC-CABLE | ELECTRIC CABLE LEAD TOOL | 1 | |
| ERG50 | TY-GUN CABLE TIE TOOL; FOR NYLON CABLE TIES; ERGONOMIC; 18-50 LBS TENSILE STRENGTH | 3 | |
| F0567219 | CABLE UNLOCKING TOOL | 1 | |
| F28232000 | TOOL PN: F28232000 INSTALLATION TOOL FOR BEARING CUP (2-080) AND (3-030), VENDOR: SAFRAN CMM 32-47-46, APPLICABLE FOR WHEEL PN: C20195162 | 1 | |
| F70221 | TOOL KIT-CABLE INSERTION TO INSTALL RETAINING | 1 | |
| F70221-8 | CABLE INSERTION TOOL KIT | 1 | |
| F72785-54 | CABLE ASSY POWER CONTROL TOOL | 2 | |
| F72966 | HOLDING TOOL -0 DOOR CABLE, NG WHEEL WELL | 1 | |
| F72966-1 | NLG WHEELWELL HOLDING CABLE TOOL | 3 | |
| F72966-2 | TOOL HOLD CABLE DOOR | 1 | |
| F80229-20 | CABLE ASSY TOOL. FIRE EXT. | 16 | |
| FDS40-0215 | CVR ADAPTER CABLE TOOL | 4 | |
| FE171901 | CABLE TENSION REGULATOR LOCK TOOL | 8 | |
| FE268901 | CRJ CABLE TENSION REG GAG (TOOL) | 5 | |
| FIG901 | CABLE ALIGNMENT TOOL#10 | 1 | |
| G5M5M0-116-0000 | SETTING TOOL - MICROSWITCH UNIT OR CABLE ADAPTER PLUG & OHMMETER (RANGE >1K OHM) | 1 | |
| GS2B | CABLE,NYLON-STRAPPING TOOL | 7 | |
| GS2B-E | CABLE,NYLON-STRAPPING TOOL | 4 | |
| GS2BL | PANDUIT CABLE TIE TOOL | 1 | |
| GS4H | TOOL,INSTLL CABLE TIE | 5 | |
| GS4MT | Cable Tie Installation Tool (Panduit Corp.) | 7 | |
| GS4MT-E | INSTALLATION TOOL - CABLE TIE ( USED WITH 0.18-INCH, 0.25-INCH, 0.31-INCH | 5 | |
| GTAL | CABLE TIE TOOL | 1 | |
| GTH-E | PANDUIT GTH-E ERGONOMIC CABLE TIE TOOL FOR S, HS, H TIES, ADJ. TENSION | 2 | |
| GTS-E | PANDUIT GTS-E ERGONOMIC HAND CABLE TIE TOOL, ERGONOMIC, ADJUSTABLE TENSION,7.8X5.7X0.9" | 5 | |
| GTSL | CABLE TIE TOOL | 1 | |
| H01-6/3000 | TOOL, HOIST CABLE INSPECTION (GJ-32-00) | 1 | |
| HC130H0098-000 | HOLDING TOOL, CABLE C OMPENSATOR | 1 | |
| HCS9000-72-170 | TOOL - CABLE REPAIR EQUIPMENT MAT | 3 | |
| HFR5-D | INTERFACE CABLE FOR TOOL HHMPI KIT P/N FDS40-0232(FDS400-232) | 1 | |
| HX4 | CRIMP TOOL FOR COAXIAL CABLES | 13 | |
| INSTALLATION TOOL | INSTALLATION TOOL - CABLE TERMINATOR BERGEN BM327 TYPE. | 1 | |
| J26004-49 | Cable - Fire Extinguishing System (Cargo/LLAR): Refer To The Tool Drawing, Usage Table, To Determine The Required Cables. | 7 | |
| JPK4 | PLIERS KIT, JOURNEYMAN, 4 PIECE, INCLUDING 8" DIAGONAL CUTTER, 8" HD LONG-NOSE WITH SIDE CUTTER AND WIRE STRIPPER, 9" NE-STYLE SIDE CUTTER WITH CRIMPER AND 9" CABLE CUTTER, MAKE: KLEIN TOOLS | 1 | |
| K27051-1 | MEASURING TOOL - EMA POSITION, SPOILER (APPLICABLE TO 787-8 AIRPLANES WITH C99144-004 ACTUATOR INSTALLED) | 7 | |
| K27051-10 | MEASURING TOOL - EMA POSITION, SPOILER (APPLICABLE TO 787-8 AND -9 AIRPLANES WITH C99144-005 AND CA99144-006 ACTUATOR INSTALLED) | 10 | |
| K27058- | RIGGING TOOL-SLAT SKEW DETECTION CABLE | 1 | |
| K27058-1 | RIGGING TOOL - SLAT SKEW DETECTION CABLE | 8 | |
| K27070-1 | CABLE ASSY TOOL | 5 | |
| M203 | SAFETY CABLE TERMINATOR TOOL - 0.020 X 3 INCH (OPTIONAL) | 1 | |
| M22520/5-01 | CRIMP TOOL FOR COAXIAL CABLES | 23 | |
| M303 | Crimping Tool 3.0 in (7.6 cm) Extension − Safety Cable 0.032 in (0.81 mm) dia. | 1 | |
| M305 | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA | 2 | |
| M307 | SAFETY CABLE TERMINATOR TOOL - 0.032 X 7 INCH (OPTIONAL) | 2 | |
| MA280030-1 | MISCELLANEOUS TOOL - BOOM CABLE TENSIONING | 1 | |
| MA280030-16 | MISCELLANEOUS TOOL - BOOM CABLE TENSIONING | 1 | |
| MG-1000 | CABLE TIE REMOVAL TOOL 5.8 INCHES | 1 | |
| MG-1300 | Cable Lacing Fastener Removal Tool | 2 | |
| MG-1400 | CABLE TIE REMOVAL TOOL | 2 | |
| MIT 807936-401 | MISCELLANEOUS TOOL (APPLICABLE TO AIRPLANES WITH FORWARD AIRSTAIR) (WEBER AIRCRAFT INC.) | 1 | |
| MIT65B09269 | CABLE RESTRAINING TOOL | 5 | |
| MIT807936-401 | MISCELLANEOUS TOOL (APPLICABLE TO AIRPLANES WITH FORWARD AIRSTAIR) (WEBER AIRCRAFT INC.) | 1 | |
| MS90378-1 | CABLE TIE HAND TOOL/ STRAP GUN | 1 | |
| MS90387-1 | CABLE TIE TOOL (GTS) PANDUIT | 2 | |
| MS90387-2 | CABLE TIE TOOL | 3 | |
| MT-3-614 | RF CABLE REMOVAL TOOL | 1 | |
| NO NUMBER | INSTALLATION TOOL - CABLE TERMINATOR BERGEN BM327 TYPE | 1 | |
| PANDUIT GS4H | CABLE MANAGEMENT TOOL | 1 | |
| PE304-36 | PE304-36 (N TYPE (M) & SMA TYPE (FEMALE) CONNECTOR) CABLE ASSEMBLY (TO CONNECT TO TOOL MS2025B) | 1 | |
| PH6810-NK | TOOL - INSTALLATION, SAFETY CABLE, 0.032 INCH DIA SCT323 | 3 | |
| PPTS | PANDUIT CABLE TIE TOOL | 2 | |
| PSDA300-1 | INTERFACE CABLE TOOL | 2 | |
| PSDA300-2 | INTERFACE CABLE TOOL | 2 | |
| PSDA300-3 | INTERFACE CABLE TOOL | 2 | |
| PSDA310-2 | INTERFACE CABLE TOOL | 1 | |
| PWC40517 | TOOL DPHM CABLES PW306A | 4 | |
| PWC90025-013 | .032 PRE-SET SAFE-T-CABLE TOOL/W3" NOSE | 1 | |
| PWC90025-017 | .032 PRE-SET SAFE-T-CABLE TOOL/W7" NOSE | 2 | |
| PWC90025-03 | .032 ROTARY SAFE-T-CABLE TOOL/W3" NOSE | 4 | |
| PWC90025-07 | .032 ROTARY SAFE-T-CABLE TOOL/W7" NOSE | 3 | |
| PWC90161 | CABLE TIE TOOL | 1 | |
| RT-4S | COAX CABLE REMOVAL/INSTALLATION TOOL | 1 | |
| S-2738 | HENCO ORAL VALVES ORAL VALVE REMOVAL TOOL (AS APPLICABLE) | 1 | |
| SCT203 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 3 Inch Nose for .022 Safe-T-Cable | 2 | |
| SCT207 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .022 Safe-T-Cable | 2 | |
| SCT32 | SAFETY CABLE TOOL | 1 | |
| SCT32084 | Spanner Tool for adjusting Hand & Pneumatic Safe-T-Cable Application Tools | 2 | |
| SCT323 | SAFETY CABLE TOOL | 3 | |
| SCT325 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 5 Inch Nose for .032 Safe-T-Cable | 2 | |
| SCT327 | SAFE-T-CABLE APPLICATION TOOL | 5 | |
| SCT327L | .032 Safe-T-Cable Application Tool with Low-Profile 7" Nose | 2 | |
| SCT40 | SAFETY CABLE APP TOOL, .040 | 1 | |
| SCT403 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 3 Inch Nose for .040 Safe-T-Cable | 2 | |
| SCT407 | Pre-Set Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .040 Safe-T-Cable | 2 | |
| SCTE323B | Battery Powered .032" Safe-T-Cable Tool | 1 | |
| SCTE323C | Battery Powered .032" Safe-T-Cable™ Tool, 3-inch Nose | 2 | |
| SCTE325C | Battery Powered .032" Safe-T-Cable™ Tool, 5-Inch Nose | 2 | |
| SCTE327C | Battery Powered .032" Safe-T-Cable™ Tool, 7-Inch Nose | 2 | |
| SCTE625B | .062 BAT PWR SAFETY CABLE TOOL, 5" NOSE | 1 | |
| SCTE625C | Battery Powered .062" Safe-T-Cable™ Tool, 5-inch Nose | 2 | |
| SCTH625 | Hydraulic Safe-T-Cable Application Tool with 5 Inch Nose for .062" Safe-T-Cable | 2 | |
| SCTN20-3 | 3" Nose Assembly for .022 Safe-T-Cable Application Tool | 2 | |
| SCTN20-7 | 7" Nose Assembly for .022 Safe-T-Cable Application Tool | 2 | |
| SCTN32-3 | 3" Nose Assembly for .032 Safe-T-Cable Application Tool | 2 | |
| SCTN32-3L | 3" Low Profile Nose for .032 Safe-T-Cable Application Tool | 2 | |
| SCTN32-5 | 5" Nose Assembly for .032 Safe-T-Cable Application Tool | 2 | |
| SCTN32-7 | 7" Nose Assembly for .032 Safe-T-Cable Application Tool | 4 | |
| SCTN32-7L | 7" Low Profile Nose for .032 Safe-T-Cable Application Tool | 2 | |
| SCTN32-9 | 9" Nose Assembly for .032 Safe-T-Cable Application Tool | 2 | |
| SCTN40-3 | 3" Nose Assembly for .040 Safe-T-Cable Application Tool | 2 | |
| SCTN40-7 | 7" Nose Assembly for .040 Safe-T-Cable Application Tool | 2 | |
| SCTP203 | Preset Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .022" Safe-T-Cable | 2 | |
| SCTP207 | Preset Pneumatic Safe-T-Cable Application Tool with 7 Inch Nose for .022" Safe-T-Cable | 2 | |
| SCTP323 | Preset Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .032" Safe-T-Cable | 2 | |
| SCTP327 | Preset Pneumatic Safe-T-Cable Application Tool with 7 Inch Nose for .032" Safe-T-Cable | 2 | |
| SCTP403 | Preset Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .040" Safe-T-Cable | 2 | |
| SCTP407 | Preset Pneumatic Safe-T-Cable Application Tool with 7 Inch Nose for .040" Safe-T-Cable | 2 | |
| SCTPR323 | Adjustable Tension, Pneumatic Safe-T-Cable Application Tool with 3 Inch Nose for .032" Safe-T-Cable | 1 | |
| SCTPRM203 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 3" Nose for for .022" Safe-T-Cable | 2 | |
| SCTPRM207 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 7" Nose for for .022" Safe-T-Cable | 2 | |
| SCTPRM323 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 3" Nose for for .032" Safe-T-Cable | 2 | |
| SCTPRM327 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 7" Nose for for .032" Safe-T-Cable | 2 | |
| SCTPRM403 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 3" Nose for for .040" Safe-T-Cable | 2 | |
| SCTPRM407 | Adjustable Tension Pneumatic Safe-T-Cable Tool with 7" Nose for for .040" Safe-T-Cable | 2 | |
| SCTR20 | SAFE T CABLE TOOL 22 | 1 | |
| SCTR203 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 3 Inch Nose for .022 Safe-T-Cable | 2 | |
| SCTR207 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .022 Safe-T-Cable | 2 | |
| SCTR32 | SAFE T CABLE TOOL 32 | 1 | |
| SCTR323 | .032 ROTARY SAFE-T-CABLE TOOL WITH 3" NOSE | 4 | |
| SCTR325 | TOOL INSTALLATION SAFETY CABLE | 2 | |
| SCTR327 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .032 Safe-T-Cable | 4 | |
| SCTR327L | .032 Rotary Safe-T-Cable Application Tool/W 7" Low-Profile Nose | 3 | |
| SCTR403 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 3 Inch Nose for .040 Safe-T-Cable | 3 | |
| SCTR407 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 7 Inch Nose for .040 Safe-T-Cable | 2 | |
| SCTR409 | Adjustable Tension, Hand Operated, Safe-T-Cable Application Tool with 9 Inch Nose for .040 Safe-T-Cable | 2 | |
| SM4215 | ADAPTOR (FOR CALIBRATING THE TOOL WITH THE CABLE ASSEMBLY) | 1 | |
| SR16GSDA | SWAGING TOOL,FLEXIBLE CABLE TERMINAL | 3 | |
| ST1066-5 | INSTALLATION TOOL AIR SEAL,RUBBER CABLE PLACER | 1 | |
| ST1066-6 | INSTALLATION TOOL AIR SEAL, RUBBER CORNER CABLE PLACER | 1 | |
| ST1066-8 | INSTALLATION TOOL AIR SEAL,RUBBER CABLE PLACER | 1 | |
| ST1066-9 | INSTALLATION TOOL AIR SEAL, RUBBER CORNER CABLE PLACER | 1 | |
| ST2715 | CLAMP, CABLE TURNBUCKLE A/C TOOLING | 1 | |
| ST2MT | CABLE TIES INSTALLATION TOOL | 3 | |
| STRIPPER | CABLE STRIPPER TOOL | 1 | |
| T | CABLE TIE INSTALLATION TOOL | 1 | |
| T&B WT-19 | CABLE TIE INSTALLATION TOOL | 1 | |
| T290600011080 | TOOL, OPLS POWER CABLE | 1 | |
| T5-2002-101-00 | CABLE TENSIOMETER TOOL | 23 | |
| T5-2002-104-00 | CABLE TENSIOMETER TOOL | 14 | |
| T5-2002-105-00 | CABLE TENSIOMETER TOOL | 4 | |
| T5-2002-401-00 | CABLE TENSIOMETER TOOL | 7 | |
| T5-5003-306-00 | CABLE TENSIOMETER TOOL | 1 | |
| T5-8003-106-00 | CABLE TENSIOMETER TOOL | 3 | |
| T5-8103-406-00 | CABLE TENSIOMETER TOOL | 1 | |
| TESTSETCABLE | TEST SET CABLE TOOL | 1 | |
| THX805-2 | CABLE BUTTON RELEASE TOOL | 1 | |
| TLW 101 | TEST TOOL - RELEASE CABLE E/S | 24 | |
| TLW101 | TEST TOOL-RELEASE CABLE,ESCAPE SLIDE | 24 | |
| TN2964 | M8 CABLE REMOVAL TOOL (AC4319) | 1 | |
| TN462190 | AILERON CABLE RIGGING TOOL | 1 | |
| TS1171 | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 2 | |
| TS1171 (SN# L20843, TOOL CODE # D928) | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 1 | |
| TSK7000QC | TWIST-CABLE STRIP TOOL | 1 | |
| TTL-CABLESIZINGTOOL | CABLE SIZING TOOL (HTTPS://WWW.TTLCAL.COM/PRODUCT/CABLE-SIZING-TOOL/ ) | 1 | |
| WT1-TB | Ty-Rap WT1-TB Cable Tie Installation Tool | 1 | |
| WT193 | TY-GUN CABLE TIE TOOL; FOR NYLON CABLE TIES; ERGONOMIC; 18-50 LBS TENSILE STRENGTH | 2 | |
| WT199 | CABLE TIE HAND TOOL/ STRAP GUN | 2 | |
| WTSTC323 | 0.32 ROTARY CABLE TOOL | 1 | |
| WWG1TBD8 | 18-50 CABLE TIE TOOL | 1 | |
| GS4MT-E | INSTALLATION TOOL - CABLE TIE ( USED WITH 0.18-INCH, 0.25-INCH, 0.31-INCH WIDE BANDS) | 5 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
