| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| EMB-00222-002 | COUPLING F | 8 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0000370700 | FLANGE COUPLING | 1 | |
| 0000370810 | FLANGE COUPLING | 1 | |
| 0000370880 | FLANGE COUPLING | 1 | |
| 0000370940 | FLANGE COUPLING | 1 | |
| 0000371780 | FLANGE COUPLING | 1 | |
| 0031-0133-1 | COUPLING, OIL FILL | 5 | |
| 0031-0134-1 | OIL FILL COUPLING ASSEMBLY, SIZE -8 PUSH PULL TYPE. | 4 | |
| 0043-0039-1 | COUPLING, BUDDY START AIR TRANSFER HOSE SYSTEM | 2 | |
| 00433-480-000 | QUICK RELEASE COUPLING FOR PUMP-THRUST REVERSER ACTUATOR RSE3480. (N068136) | 1 | |
| 014503-S5-20D | QUICK DISCONNECT COUPLING FOR B737/MD80 | 4 | |
| 015503-S5-10D | QUICK DISCONNECT COUPLING FOR B737/MD80 | 4 | |
| 015567-S5-10D | COUPLING HALF | 3 | |
| 015567S5-12D | COUPLING HALF | 2 | |
| 015567S5-4D | COUPLING HALF | 3 | |
| 0249980010 | COUPLING SHAFT | 1 | |
| 0292907530 | SHAFT,COUPLING | 1 | |
| 0465720110 | FEMALE FLANGED COUPLING | 1 | |
| 05-1-9231-3-600 | COUPLING FOR LEAKAGE TEST | 1 | |
| 05-6-9231-1-600 | COUPLING FOR LEAKAGE TEST | 1 | |
| 05192313600 | COUPLING FOR LEAKAGE TEST | 1 | |
| 056EE00961600 | COUPLING FOR LEAKAGE TEST | 1 | |
| 0MP2505-2 | COUPLING: HALF,BULKHEAD, | 15 | |
| 0MP2505-3 | COUPLING HOSEHALF | 12 | |
| 0MP2506-2 | COUPLING HALF | 14 | |
| 0MP2506-3 | COUPLING HALF | 22 | |
| 1027 | CART - LAVATORY SERVICE - 500 GALLON FLUSH & DETERGENT FLUID - WITH HOSE AND COUPLING | 1 | |
| 1050580 | FLEXIBLE COUPLING | 1 | |
| 10C1099G01 | TOOL, INSTALLATION - LPT FORWARD COUPLING NUT RETAINING RING, | 1 | |
| 10C1105G02 | ADAPTER, TORQUE, COUPLING NUT - FAN MAINTENANCE UNIT TO FAN MID SHAFT (TORQUE ADAPTER) | 1 | |
| 114-901 | RIVETING ANVIL FOR INSTALLATION OF THE DRIVE COUPLING IN THE HUB CAP | 2 | |
| 114-902 | RIVETING PEEN FOR INSTALLATION OF THE DRIVE COUPLING IN THE HUB CAP | 1 | |
| 11C3033 | FIXTURE - INSTALL/REMOVE-COUPLING NUT - HPT RTR STG 2 | 1 | |
| 11C3423 | FIXTURE, TORQU LPT/FAN COUPLING NUT | 1 | |
| 11C4265 | FIXTURE - TORQUE - LP TURBINE /FAN COUPLING NUT | 1 | |
| 1226-202 | COUPLING ASSY FEMALE | 1 | |
| 1301-J-20C | COUPLING FOR P/N RSE1079 | 1 | |
| 1325J16C | Coupling - toilet fill/sluice | 4 | |
| 13822-00 | RESPIRATOR REGULATOR MATING COUPLING THREADED TYPE - FOR RESPIRATOR REGULATOR ASSEMBLY USED ON 9800-1 SERIES PCA OR AN TYPE QUICK DISC - FOR RESPIRATOR REGULATOR ASSEMBLY USED ON 9800-2 SERIES PCA OR 9800-9 SERIES PCA | 3 | |
| 14-6808-6000 | NITROGEN SRVICING REGULATOR HOSE ASSY FOR DOOR DAMPER SERVCING HOSE COUPLING.CONNECTOR MAIL. SEAL FLASHSHER | 17 | |
| 1419M27P01 | COUPLING SHAFT | 1 | |
| 145S5-20D | COUPLING HALF | 3 | |
| 14807-00 | REFILL COUPLING AVOX SYSTEMS (SAFRAN) | 4 | |
| 150QH-04-01-A | FLUID DISPENSER MODEL150 WITH OVERFLOW HOSE AND IDG COUPLING | 1 | |
| 150QL-01-01 | DISPENSER - OIL SERVICING, 1 QT OIL CONTAINER WITH COUPLINGS FOR | 1 | |
| 155-S5-8D | HYDRAULIC RESERVOIR, SERVICING UNIT HOSE HALF COUPLING | 9 | |
| 155S5-10D | COUPLING FEMALE | 2 | |
| 155S5-12D | SELF SEALING COUPLING STYLE I | 6 | |
| 16A46080L1-1 | FUEL DISCONNECT DECOUPLING ASSEMBLY | 1 | |
| 16A46080L1-13 | FUEL DECOUPLING DISCONNECT KIT | 1 | |
| 1870 | COUPLING FOR IDG PUMP | 4 | |
| 1981H000 | COUPLING HALF, PRESSURE | 1 | |
| 1982H000 | SUCTION COUPLING HALF | 1 | |
| 1C6344 | TORQUE ADAPTER SET AIR TUBE COUPLING FMF LM2500 | 1 | |
| 1C6362 | SUPPORT COUPLING SHAFT FORWARD | 1 | |
| 1C6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| 1C6364 REV J | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| 1C6364G02 | TORQUE ADAPTER, FORWARD ADAPTER, COUPLING NUT | 1 | |
| 1C6364G03 | Torque Adapter, FWD Adapter Coupling Nut | 1 | |
| 1C9309G01 | FIXTURE, TORQUE - LPT SHAFT COUPLING NUT | 1 | |
| 1C9309G03 | FIXTURE, TORQUE LPT SHAFT COUPLING NUT | 1 | |
| 1C9310G01 | FIXTURE, START - LPT COUPLING NUT | 1 | |
| 1C9311G02 | FIXTURE, SEAT CHECK - COUPLING NUT, SHAFT,LPT ROTOR | 1 | |
| 1C9329 | PUSHER/PULLER AFT COUPLING | 1 | |
| 1C9616 | FIXTURE - SEAT CHECK-COUPLING NUT | 1 | |
| 1C9616G01 | Fixture, Seat Check - Coupling Nut, Shaft | 1 | |
| 1C9617 | FIXTURE - START-LPT COUPLING NUT | 1 | |
| 1C9617G01 | Fixture, Start LPT Shaft Coupling Nut | 1 | |
| 1C9619G01 | Fixture, Torque LPT Shaft Coupling | 1 | |
| 1QF2-2-64A | COUPLING, QUICK DISCONNECT - PITOT SYSTEM DRAIN LINE (MINIMUM BUY OF $250) (HYDRAFLOW) | 6 | |
| 1QF2-3-64C | Coupling-Quick Disconnect,Static System Drain Fitting | 16 | |
| 1QF2-3-64CÃ? Ã? Ã? Ã? Ã? Ã? Ã? | COUPLING - QUICK DISCONNECT, STATIC SYSTEM DRAIN FITTINGà| 16 | |
| 1QF2-364C | COUPLING: HALF,QUICK DISCONNECT, | 16 | |
| 1QM1-2-44A | COUPLING MALE FLOW-THRU | 3 | |
| 1QM1-2-64A | COUPLING - FLUSHING | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 20282-F | FEMALE QUICK COUPLING (PRESS OUT LET) | 1 | |
| 20282-M | MALE QUICK COUPLING(TANK FILL) | 1 | |
| 208147-0 | FILLER COUPLING | 1 | |
| 220.251 | QC COUPLING MALE/FEMALE | 1 | |
| 2249013-11 | COUPLING SHAFT | 1 | |
| 2315MK4 | COUPLING - OIL SERVICING - IDG, CSD, VSCF | 10 | |
| 235677 | WATER COUPLING 2-KL-F16 | 3 | |
| 23003629 | GAGE – EXTERNAL HELICAL SPLINE, SAFETY COUPLING | 1 | |
| 23003630 | GAGE – INTERNAL HELICAL SPLINE, SAFETY COUPLING INNER MEMBER | 1 | |
| 23006784 | GUIDE-INSTALLA ON OF TURBINE-TO-COMPRESSOR COUPLING | 2 | |
| 2506-3 | QUICK DISCONNECT COUPLING HALF 33068-OMP | 1 | |
| 269A9317 | Drill Fixture - Coupling, Main Rotor Transmission Output Shaft | 1 | |
| 269T9211-003 | Drive Shaft Coupling Adapter Spanner Wrench | 1 | |
| 277-004 | COUPLING, FOR A/C | 1 | |
| 284476-3-1 | MECHANICAL PULLER ASSEMBLY (REAR COUPLING PULLER) (REMOVES REAR COUPLING SEAL FROM TIE SHAFT) | 1 | |
| 290562-1 | COUPLING HALF BALANCING SET | 1 | |
| 290563-1 | BALANCING KIT COUPLING HALF | 1 | |
| 292975-1 | BALANCING COUPLING HALF | 1 | |
| 292976-2 | BALANCE KIT COUPLING HALF | 1 | |
| 294881-3 | ROTOR AND BEARING MECHANICAL PULLER (REMOVES OIL SLINGER ROTOR AND BEARING FROM COUPLING (ALTERNATE TO 294881-1)) | 1 | |
| 294886-1 | ROTATING ASSEMBLY HOLDER (TO LOCATE INSIDE DIAMETER OF 3822065-1 SHAFT COUPLING AND SUPPORT THE ROTATING GROUP DURING SHAFT STRETCH) | 1 | |
| 295286-1 | BALANCING KIT CONVEX COUPLING HALF | 1 | |
| 295286-2 | BALANCING KIT CONCAVE COUPLING HALF | 1 | |
| 296275-1 | COUPLING SHAFT HOLDER | 1 | |
| 296779-1 | HOLDER&DRIVER, SEAL PLATE-FRONT COUPLING | 1 | |
| 2C14093 | WRENCH, COUPLING NUT-LP TURB. MID SHAFT | 1 | |
| 2C14093 REV J | WRENCH, COUPLING NUT-LP TURB. MID SHAFT | 1 | |
| 2C14093G02 | WRECH, COUPLING NUT- LOWPRESSURE TURBINE MIDSHAFT | 1 | |
| 2C14093G03 | ADAPTOR, TORQUE,COUPLING NUT-LPT MID SHAFT | 6 | |
| 2C14093P13 | COUPLING NUT WRENCH-LPT MID SHAFT | 1 | |
| 2C14704G06 | COUPLING NUT-DUMMY SHAFT COMPRESSOR OR HPT ROTOR | 2 | |
| 2C6038G03 | WRENCH, COUPLING NUT - FAN SHAFT & AFT | 1 | |
| 2C6833 | COUPLING NUT-FAN MAINTENACE | 1 | |
| 2C6833G05 | Wrench, Coupling Nut - Fan Maintenance Unit | 2 | |
| 2C81013G01 | FIXTURE, AFT COUPLING NUT DRIVE | 1 | |
| 2C82170G01 | FIXTURE MEASURE - HPT ROTOR, OUTER TORQUE COUPLING | 1 | |
| 306503-S5-4D | COUPLING HALF | 5 | |
| 306503S5-4D | COUPLING HALF | 5 | |
| 306503S5-8D | COUPLING HALF | 2 | |
| 314150 | COUPLING, GREASE GUN,SHAFER TYPE NOZZLE - THREAD 1/8 | 10 | |
| 3024973 | COUPLING, NF GOVER. | 1 | |
| 292708020 | MUFF COUPLING ASSY | 1 | |
| 320-01D23T182U | AEROQUIP HYDRAULIC COUPLING HALF NUT - A 4063 75506-6 | 1 | |
| 33068-OMP2506-3 | QUICK DISCONNECT COUPLING HALF | 1 | |
| 3402760-1 | WRENCH HT, WIG-O-FLEX COUPLINGS | 1 | |
| 341A35014000 | ENGINE MGB FLEXIBLE COUPLING | 1 | |
| 3582645 | COUPLING FOR DRAWBAR, GANTRY - 3582645 | 1 | |
| 365A32653000 | COUPLING, FLEXIBLE | 1 | |
| 40006-1A44 | COUPLING HALF,QUICK | 1 | |
| 40006-1B45 | COUPLING HALF,QUICK. | 2 | |
| 41-110 | Coupling - for 42-500 | 2 | |
| 41-139 | Coupling - for 42-51 | 1 | |
| 42167AF-600 | V I J CORPORATION CAGE CODE: 94581 (SLEEVE FS3-600 COUPLING 42167AF-600) | 1 | |
| 44004-04A-E17 | HYDRAULIC FILL COUPLING | 6 | |
| 44006-06A-E17 | KIT, HYDRAULIC COUPLING (Sratoflex) | 6 | |
| 44006-06A-E17 | KIT, HYDRAULIC COUPLING (Sratof | 6 | |
| 44006-06E-E17 | QUICK DISCONNECT COUPLING FOR ERJ 175/195 | 1 | |
| 44008-08A-N1 | QUICK DISCONNECT COUPLING HALF | 1 | |
| 44010-10E-E17 | QUICK DISCONNECT COUPLING FOR ERJ 175/195 | 2 | |
| 44010-10EN1 | SELF SEALING COUPLING ADAPTER | 1 | |
| 44012-12A-N1 | QUICK DISCONNECT COUPLING HALF | 1 | |
| 44A10-3 | HYDRAULIC SELF-SEALING COUPLING - STYLE III (WITH THREAD AS33514E10) | 1 | |
| 460006157-2 | MUFF COUPLING | 1 | |
| 460006157-3 | MUFF COUPLING | 1 | |
| 460006157-5 | MUFF COUPLING | 1 | |
| 4709-3 | COUPLING-TOILET FLUSH | 6 | |
| 473860 | COUPLING FUEL PUMP REAR | 5 | |
| 460006157 | MUFF COUPLING | 1 | |
| 4MIT65B04008 | LUBE ADAPTER SET - FLAP TRAILING EDGE TORQUE TUBE COUPLINGS | 8 | |
| 4MIT65B04008-1 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-13 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-14 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-2 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-22 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-25 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-3 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-4 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-5 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-6 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-7 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-8 | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-A | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-B | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-C | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-D | KIT LUBE COUPLING FL | 1 | |
| 4MIT65B04008-E | KIT LUBE COUPLING FL | 1 | |
| 500N9505-1M | NOTAR DRIVE SHAFT COUPLING SOCKET (MODIFIED) | 1 | |
| 5020-01 | REFILL COUPLING | 8 | |
| 5021-01 | REFILL COUPLING CGA 540 X 0.563 - 18UNF-2B THREADS | 1 | |
| 52515K65 | FEMALE JIC SWIVEL COUPLING SS | 1 | |
| 5315K47 | QUICK DISCONNECT COUPLING HALF | 1 | |
| 5315K48 | QUICK DISCONNECT COUPLING HALF | 1 | |
| 54311AI7EK4 | PAINT OPTION TRONAIR BLUE AI COUPLINGS INCLUDED 380VAC/3PH/50HZ 25FT HOSES SINGLE SYSTEM HOURMETER 5 | 1 | |
| 556 | XZT AIRCRAFT AVIATION TOOLS SCHRADER,HIGH PRESSURE STRUCT NO AIR LOSS COUPLER 556,COUPLINGS TO FILL | 3 | |
| 502001 | REFILL COUPLING | 8 | |
| 5643-4-4S | FEMALE COUPLING HALF | 1 | |
| 5644-4-4S | MALE COUPLING HALF | 1 | |
| 5838450-1 | COUPLING REMOVER (POST SB CFE738-72-8049) | 1 | |
| 60427 | REFUELING COUPLING | 1 | |
| 6064CT000-002 | COUPLING FOR LEAKAGE TEST | 1 | |
| 61605-30 | CAP FILLING COUPLING | 2 | |
| 6210-00 | RESPIRATOR REGULATOR MATING COUPLING THREADED TYPE - FOR RESPIRATOR REGULATOR ASSEMBLY USED ON 9800-1 SERIES PCA OR AN TYPE QUICK DISC - FOR RESPIRATOR REGULATOR ASSEMBLY USED ON 9800-2 SERIES PCA OR 9800-9 SERIES PCA | 2 | |
| 6602-4-4W | MALE COUPLING HALF | 1 | |
| 6MIT65B04017 | LE FLAP TORQUE TUBE COUPLING LUBE ADAPTER SET | 1 | |
| 7011 | DISPENSER - OIL SERVICING - 1 QT OIL CONTAINER WITH COUPLINGS FOR ENGINE, APU, IDG/CSD | 8 | |
| 7012 | DISPENSER - OIL SERVICING, 1 QT OIL CONTAINER WITH COUPLINGS FOR | 4 | |
| 70307-03001-103 | COUPLING ASSEMBLY,SELF-SEALING | 1 | |
| 70307-03034-103 | COUPLING ASSEMBLY,SELF-SEALING | 1 | |
| 7197 | 1 US QT PUMP, 54IN, NO COUPLING, 7/16JIC(F), MIL-PRF-5606 | 1 | |
| 8206 | SWIVEL COUPLING FEMALE TO FEMALE M10X1 | 1 | |
| 725175 | COUPLING, REFUEL | 1 | |
| 725185 | COUPLING, REFUEL | 1 | |
| 6796136 | WRENCH, SAFETY COUPLING | 3 | |
| 6796138 | DRIFT - SAFETY COUPLING OUTER MEMBER SHAFT BUSHING REMOVAL | 2 | |
| 6796185 | DRIFT - INSTALLATION, SAFETY COUPLING OUTER MEMBER SHAFT BUSHING | 2 | |
| 6796186 | SUPPORT - SAFETY COUPLING DISASSY | 1 | |
| 6796264 | WRENCH - TURBINE COUPLING SHAFT ASSEMBLY | 2 | |
| 6796265 | PULLER - TURB COUPLING SHAFT ADAPTER | 1 | |
| 6796266 | HOLDER - TURB COUPLING SHAFT | 1 | |
| 6796351 | SUPPORT, SAFETY COUPLING RETAINING NUT WRENCH | 2 | |
| 6796621 | FIXTURE - HOLDING, TURBINE COUPLING SHAFT | 2 | |
| 6796917 | COMP. TURB COUPLING SHAFT ASSY | 1 | |
| 6797100 | WRENCH - SAFETY COUPLING OUTER MEMBER | 1 | |
| 6797102 | DRIFT - SAFTEY COUPLING | 1 | |
| 6797118 | DRIFT - SAFTEY COUPLING | 1 | |
| 6797120 | COMPRESSOR - SAFTEY COUPLING | 1 | |
| 6797126 | DRIFT - SAFTEY COUPLING | 1 | |
| 6797173 | HOLDING FIXTURE - TURB COUPLING SHAFT | 1 | |
| 6797174 | WRENCH - TURB COUPLING SHAFT | 1 | |
| 6797175 | PULLER - TURBINE COUPLING SHAFT ADAPTER | 1 | |
| 6797176 | HOLDER - TURBINE COUPLING SHAFT | 1 | |
| 6797177 | DRIFT - TURBINE COUPLING SHAFT SPACER | 1 | |
| 6797178 | HOLDER - TURBINE COUPLING SHAFT | 1 | |
| 6797179 | DRIFT - TURBINE COUPLING SHAFT ADAPTER | 1 | |
| 6797182 | HOLDER - TURB COUPLING SHAFT | 1 | |
| 6797637 | WRENCH, BOX TO SAFETY COUPLING MOUNTING BOLT | 2 | |
| 6797775 | ADAPTER FRONT-TORQUEMETER & SAFETY COUPLING | 1 | |
| 6797776 | ROLLS-ROYCE ALLISON ADAPTER REAR TORQUEMETER & SAFETY COUPLING ASSY | 2 | |
| 6799868 | BENDING TORQUEMETER-TO-SAFETY COUPLING | 1 | |
| 531200326 | ENGINE REVERSER COWLING PUMP (WITH QUICK COUPLING, WITHOUT FILTER)- | 3 | |
| 734-10051-6 | COUPLING HALF SELF SEALING | 1 | |
| 734-10051-7 | COUPLING HALF SELF SEALING | 1 | |
| 736-013 | COUPLING, HALF HOSE | 3 | |
| 751379ME | FILLING UNION (STRAIGHT QUICK-DISCONNECT COUPLING | 1 | |
| 8260-2RC | COUPLING, FLEXIBLE 14Ó LG | 1 | |
| 8260-2RC-14 | FLEX COUPLING | 1 | |
| 833432-1 | COUPLING INSTALLATION FIXTURE | 1 | |
| 834864-1 | DRIVEN COMPRESSOR COUPLING SHAFT HOLDING FIXTURE | 1 | |
| 835225-1 | FLOW RESTRICTOR COUPLING ASSEMBLY | 1 | |
| 835540-1 | AIR-SEAL PULLER (REMOVES COUPLING AND SEAL ASSEMBLY FROM THE SHAFT) | 1 | |
| 856A2423G01 | FIXTURE, TORQUE FAN DISK COUPLING BOLT (FIXTURE) OPTIONAL | 1 | |
| 856A2624G01 | BEAM, RESIDUAL TORQUE - LPT SHAFT COUPLING NUT (RESIDUAL TORQUE BEAM) | 3 | |
| 856A3502 G03 | FIXTURE, GUIDE AND COUNTERTORQUE LPT COUPLING NUT | 1 | |
| 856A3502G03 | FIXTURE, GUIDE AND COUNTERTORQUE LPT COUPLING NUT | 1 | |
| 856A3502G05 | FIXTURE, GUIDE AND COUNTERTORQUE LPT COUPLING NUT | 1 | |
| 856A3502G06 | COUNTERTORQUE/GUIDE FIXTURE - LPT COUPLING NUT | 5 | |
| 856A3506G02 | WRENCH, TORQUE - LPT COUPLING NUT (TORQUE WRENCH) CFM56-3 | 9 | |
| 856A3724 | TOOL SET, SIGHTING FAN DISK COUPLING BOLTS | 1 | |
| 856A3724G01 | TOOL SET, SIGHTING FAN DISK COUPLING BOLTS | 1 | |
| 856A3724G02 | TOOL SET, SIGHTING FAN DISK COUPLING BOLTS | 8 | |
| 856A3725 | TOOL SET WRENCHES TORQUE LOOSEN FAN DISK COUPLING BOLTS. | 1 | |
| 856A3725G01 | Wrench, Torque/Loosen - Fan Disk Coupling Bolts | 2 | |
| 856A3725G02 | TOOL SET WRENCHES TORQUE LOOSEN FAN DISK COUPLING BOLTS | 12 | |
| 856A3725G03 | TOOL SET, WRENCHES TORQUE LOOSEN FAN DISK COUPLING BOLDS | 3 | |
| 856A3906 | FIXTURE TORQUE FAN DISK COUPLING | 1 | |
| 856A3906G01 | FIXTURE TORQUE FAN DISK COUPLING | 10 | |
| 856A5564 | SPHERICAL RESURFACING SET - LPT END TUBE COUPLING | 1 | |
| 856A5564G01 | KIT, RESURFACING - SPHERICAL END TUBE COUPLING | 1 | |
| 856A5564P01 | SPHERICAL RESURFACING SET - LPT END TUBE COUPLING | 2 | |
| 856A5565 | CONICAL/COUPLE RESURFACING SET - LPT END TUBE COUPLING | 1 | |
| 9131US | COUPLING, AIR START FEMALE | 1 | |
| 9132 | COUPLING, AIR START FEMALE | 1 | |
| 956A3012 | FIXTURE - INSTALL/REMOVE-COUPLING NUT -HPT RTR STG 2 | 1 | |
| 97886769 | COUPLING,PIPE:3/4 IN,THD,3000 LB,FORGED STL ... | 1 | |
| 8816845000 | COUPLING SHAFT CONDITIONING | 1 | |
| 905-14511 | INTERUPTER OIL COOLER SHAFT COUPLING AS332 | 1 | |
| 9421M99 | FIXTURE,ALIGNMENT-HIGH SPEED COUPLING | 1 | |
| 9459M31 | COUPLING HALF, SHAFT | 1 | |
| 956A1012 | FIXTURE - INSTALL/REMOVE - COUPLING NUT - HPT ROTOR | 1 | |
| 98L27508594114 | COUPLING FITTING | 1 | |
| 98S27005005000 | PITCH UNCOUPLING DEFUELING VALVE | 7 | |
| 991AD | MANIFOLD ASSY, COUPLING | 1 | |
| 9970-957-198 | LEVER, CHECK, ANTITORGUE-COUPLING SHAFT | 1 | |
| 9C2337 | TOOL SET COUNTER - TORQUE FAN DISK - COUPLING BOLT | 1 | |
| 9C3185 | FIXTURE, INSTALL/REMOVE - COUPLING NUT, HPT RTR STG 2 | 1 | |
| A24404-1 | COUPLING, HALF | 1 | |
| A330-92164-0001 | FLEXIBLE COUPLING TOOL | 1 | |
| A353A04 | COUPLING HALF, QUICK DISCONNECT | 2 | |
| A38003-27 | Coupling Flexible | 1 | |
| AE155-25-5D | COUPLING HYD FILL | 1 | |
| AE73638H | COUPLING (2 OFF) | 1 | |
| AE73655H | COUPLING (2 OFF) | 1 | |
| AE73953G | COUPLING HALF | 4 | |
| AE74570G | HALF COUPLING | 1 | |
| AE76298M | HALF COUPLING | 3 | |
| AE80231M | Coupling half, suction hose hyd test rig | 1 | |
| AE82304G | COUPLING (REV D), QD (3/8") FOR PA15 | 1 | |
| AE89903H | COUPLING HALF | 3 | |
| AE90432N | HALF COUPLING | 1 | |
| AE94186P | QUICK DISCONNECT COUPLING FOR A320/B747 | 8 | |
| AE95074N | QUICK DISCONNECT COUPLING FOR A320/B747 | 6 | |
| AE95075N | COUPLING HALF | 1 | |
| AE95394M | SELF SEALING COUPLING | 2 | |
| AE95473P | SELF SEALING COUPLING | 1 | |
| AE96993E | COUPLING HALF SELF SEALING | 8 | |
| AE96997M | COUPLING HALF | 3 | |
| AE98104K | DRAIN HOSE SELF-SEALING COUPLING | 1 | |
| AE99109E | 3000 PSIG LOW PROFILE COUPLINGS | 1 | |
| AE99111E | Coupling, Half | 5 | |
| AE99115E | COUPLING HALF | 4 | |
| AE99119G | HYDRAULIC POWER PRESSURE FEMALE COUPLING | 4 | |
| AE99119G | COUPLING, HALF, QUICK DISCONNEC | 4 | |
| AE99136K | COUPLING, HALF QDISC | 4 | |
| AE99140E | COUPLING HYD FILL | 10 | |
| AE99140E | COUPLING HALF | 10 | |
| AE99144G | COUPLING HALF, QUICK DISCONNECT | 6 | |
| AE99148E | HALF COUPLING | 6 | |
| AE99148J | HALF COUPLING | 2 | |
| AGE-01846-401 | KIT HYDRAULIC COUPLING N/P AGE-01846-401 S/N NF163293/04 | 3 | |
| AGE-01846-403 | SET-COUPLING N/P AGE-01846-403 S/N F038491860 | 5 | |
| AHC21D | COUPLING QD FEMALE | 1 | |
| AL120-01-DN20 | COUPLINGS PARA HFKS | 1 | |
| AL120-03-DN24 | COUPLINGS PARA HFKS | 1 | |
| AL120-05-DN20 | COUPLING HALF | 1 | |
| AL120-06-DN24 | COUPLING HALF | 1 | |
| APN 5020-01 | Refill Coupling | 1 | |
| AS28889-2 | HYDRAULIC FILL COUPLING | 1 | |
| AS33514E1 | ADAPTER - SELF SEALING COUPLING | 1 | |
| AS33514E10 | ADAPTER - SELF SEALING COUPLING | 1 | |
| AS33514E10 TYPE | ADAPTER - SELF SEALING COUPLING | 1 | |
| AS33514EIO TYPE | ADAPTER - SELF SEALING COUPLING | 1 | |
| ASKHC-2258 | COUPLING KIT (CSD OVERFLOW) | 1 | |
| AZL02207-R00 | COMPRESSED AIR HOSE COMPR. 20 METERS 300 PSI ¿ FIXED QUICK COUPLING AND 3-8 CONNECTORS | 1 | |
| B3005S4-10D | COUPLING HALF | 1 | |
| C27041 | WRENCH-COUPLING SLEEVE FLAP ACTUARION | 1 | |
| C27041-1 | Wrench - Coupling Sleeve, Flap Actuation | 11 | |
| C27041-2 | COUPLING SLEEVE FLAP ACTUATION WRENCH | 1 | |
| C28004-1GCTR | FUEL FEED LINE TEST SET (GAMMA COUPLING) | 1 | |
| CCMY 6253N | GUNMETAL, ST/STEEL, 2 1/2-INCH SELF SEALING INDUSTRIAL COUPLINGS - BRAND: MEGGITT | 1 | |
| CGA 540 | REFILL COUPLING CGA 540 X 0.563-18UNF- 2B THREADS 5020-01 | 1 | |
| CK007F | FEMALE COUPLINGS FOR TF HYD RIG | 1 | |
| CK013F | COUPLING KIT, FEMALE, COMPLETE | 1 | |
| CPN1/2-20-SZ2BGR5 | COUPLING NUT 1/2-20 STEEL ZINC FILET 2B GRADE 5 | 1 | |
| CPWA-30482 | Fixture – Holding, Accessories Gear Box Coupling S | 1 | |
| D-659-0001 | MICRODOT THREADED COUPLING (MTC) CONNECTOR WAFER REMOVAL TOOL | 7 | |
| EMB-00222-002 | COUPLING,FUEL DISCHARGE | 8 | |
| Ex-74974 | Jig-drill, turbine coupling shaft | 1 | |
| Ex-74999 | Jig-drill, turbine coupling shaft | 1 | |
| F7XC202059004 | WRENCH SET FOR WIGGINS/WOF COUPLINGS | 1 | |
| FHI010 | SPECIAL TOOL FOR HP COUPLING | 1 | |
| FMAX-CA1 | FMAX-CA1;Coupling Adapter Converts FMA Adapters to FMAX | 1 | |
| G1037 | COUPLING (FOR MARK-10 M4-200 SERIES 4) | 2 | |
| G29014-12 | COUPLING HALF | 1 | |
| G29014-16 | COUPLING HALF | 1 | |
| G29014-24 | COUPLING HALF | 1 | |
| G29014-5 | COUPLING HALF | 1 | |
| G71012-90 | COUPLING HALF SIMULATOR | 1 | |
| GSE050-170-190 | K-2410 COUPLING TOILET SYS FILLING | 1 | |
| GTP-994-4FS | FEMALE FAST COUPLING | 1 | |
| H-2225-01 | COUPLING, HALF | 1 | |
| H-2228 | COUPLING PUMP HALF | 1 | |
| H2075-57-M5-V6 | COUPLING FILL | 1 | |
| HFWAN6027-01 | COUPLING HALF QUICK DISCONNECT | 1 | |
| HKT2F-LL-V01-UNF3 | COUPLING HALF COWLING PUMP | 1 | |
| HLA1630-T | GAUGE COUPLING SWIVEL NUTS, W NATO FM & M10X100 FM | 1 | |
| HQD 010 HA | COUPLING FRO 767 AND | 3 | |
| HQD-010-HA | QUICK DISCONNECT COUPLINGS FOR AIRBUS A320 FAMILY | 3 | |
| HQD010HA | HYCOM Quick Disconnect Coupling, For HRT-06 Ground Check Motor | 3 | |
| HQD014HA | HYCOM Quick Disconnect Coupling, For HTT-02 Internal Leakage Tester | 3 | |
| HQD030HA | HYCOM Quick Disconnect Coupling, For HRT-05 Ground Check Motor | 2 | |
| HQD3HFP010 | COUPLINGS: QUICK DISCONNECT,PURIFIER | 2 | |
| HQD3HFP014 | COUPLINGS: QUICK DISCONNECT,PURIFIER | 2 | |
| HQD3HFP030 | COUPLINGS: QUICK DISCONNECT,PURIFIER | 2 | |
| HRR683-7 | FORD FUEL LINE COUPLING TOOL | 1 | |
| HTE11179-1 | Blank Flareless Coupling | 1 | |
| HTE11179-1PM | BLANK FLARELESS COUPLING | 1 | |
| HTE11179-4 | Blank Flareless Coupling | 1 | |
| HTE11179-4PM | BLANK FLARELESS COUPLING | 1 | |
| HTE711-19G | COUPLING HALF,QUICK | 1 | |
| HU15881 | TOOL FOR BALANCING DRIVE COUPLING | 1 | |
| HU37987 | COVER, PROTECT - SHAFT CURVIC COUPLING | 3 | |
| HU4000 | REFUELING COUPLING | 1 | |
| IQF2-3-64C | COUPLING - QUICK DISCONNECT, STATIC SYSTEM DRAIN FITTING | 1 | |
| J27003-1 | Adapter - Drive, Torque Tube Coupling, L. E. Slat (Requires Customer Furnished Air Motor-Max 1200 In/Lb & 110 Rpm) | 10 | |
| J27021-1 | DRIVE ADAPTER - TORQUE TUBE COUPLING, T.E. FLAP | 10 | |
| J270211 | ADAPTOR-TORQUE TUBE COUPLING, T/E FLAP | 10 | |
| J27050-1 | WRENCH - COUPLING SLEEVE, FLAP ACTUATION | 6 | |
| J27050-2 | Wrench - Coupling Sleeve, Flap Actuator | 1 | |
| J27108-1 | Drive adapter-drive line coupling,flap and slat | 1 | |
| J27108-13 | Drive adapter-drive line coupling,flap and slat | 1 | |
| J382P06 | COUPLING TUBE WELDING 0.5625-18DIAMETER UNJF-3A THREADS/MATERIAL AMS 5645 | 1 | |
| JB729 | GROUND CONNECTION COUPLING,NYLON/FI | 2 | |
| JD13-1019-04-04 | COUPLING HALF | 4 | |
| JD13-1019-05-05 | SERVICE VALVES COUPLING HALF | 1 | |
| K-1036 | Kit, Lsu Fill Coupling | 2 | |
| K-1300 | POTABLE WATER FILL COUPLING-SIZE,-12 | 2 | |
| K-2029 | DUMP COUPLING WITH 5 FT LONG HOSE | 8 | |
| K-2410 | COUPLING, SYSTEM FILLING - TOILET | 13 | |
| K-2410. | COUPLING TOILET FILL | 13 | |
| K-2411 | COUPLING, POTABLE WATER FILL CONNECTOR | 10 | |
| K-3706 | COUPLING HIGH PRESS HOSE X2 (0NE FOR OXYGEN AND ONE FOR NITROGEN | 16 | |
| K2029A1 | COUPLING: 10FT, | 2 | |
| K2410 | COUPLING TOILET FILL | 13 | |
| K27012 | Drive Adapter -Torque Tube Coupling. Leading Edge Slat And Trailing Edge Flap | 1 | |
| K779-RELAY | COUPLING HP AND LP FOR A320/330/340 | 1 | |
| KHC-1004 | TRONAIR KHC-1004 AIRCRAFT HYDRAULIC COUPLING KIT | 5 | |
| KHC-1008 | QUICK-DISCONNECT HYDRAULIC COUPLING KIT FOR GULFSTREAM | 6 | |
| KHC-1009 | KIT: COUPLING,HYD RESERVOIR, FILL | 5 | |
| KHC-1011 | QUICK-DISCONNECT HYDRAULIC COUPLING FOR CHALLENGER | 7 | |
| KHC-1012M | KIT: COUPLING HYD RESERVOIR FILL | 2 | |
| KHC-1160 | F100 KIT HYDRAUL COUPLING | 6 | |
| KHC-1342 | HYDRAULIC COUPLING KIT FOR GLOBAL | 5 | |
| KHC-2173 | COUPLING KIT, ENGINE (CSD FILL) | 10 | |
| KHC-2199 | COUPLINGS FOR SERVICE AND POWER UNIT | 4 | |
| KHC-2258 | COUPLING KIT (CSD OVERFLOW) | 7 | |
| KHC-2628 | EMBRAER HYDRAULIC COUPLING KIT FOR EMBRAER | 7 | |
| KHC-3560 | KIT COUPLING HYDRAULIC RESERVOIR FILL | 4 | |
| KHC-4006 | HYDRAULIC COUPLING KITS FOR BLENDING AIR FROM THE | 3 | |
| KHC1012 | COUPLING HYDRAULIC RESERVOIRS FILLING ON CRJ900 | 12 | |
| KHC1012M | KIT: COUPLINGHYD RESERVOIR FILL | 2 | |
| KHC1014 | COUPLING HYDRAULIC FITTING | 4 | |
| KHC1046 | KIT: COUPLING,HYD RESERVOIR, FILL | 1 | |
| KHC1084 | KIT: COUPLING,HYD RESERVOIR, FILL | 1 | |
| KHC1160 | HYDRAULIC COUPLING KIT F100 | 6 | |
| KHC2173 | COUPLING KIT, ENGINE (CSD FILL) | 10 | |
| KHC2199 | COUPLINGS FOR SERVICE AND POWER UNIT | 4 | |
| KHC4006 | TRONAIR Self Cleaning Circulation Kit, For KHC-4005 Coupling Kit | 3 | |
| KNZ220.2510 | BTS - QUICK-COUPLING 9/16" UNF 18, SET (FEMALE / MALE) | 1 | |
| KQC-109PW | QUICK DISCONNECT COUPLINGS (FOR A109) | 2 | |
| KQC-139 | KIT OF QUICK DISCONNECT COUPLINGS AND DUST CAPS FOR AW139/AW169/AW189 | 2 | |
| KQC-A109A | QUICK DISCONNECT COUPLINGS (FOR A109) | 1 | |
| K−2029 | Dump Coupling with 5 ft (1.524 m) Long Hose | 8 | |
| LTCT9537 | COUPLING HALF, CLAMP, GROOVED | 1 | |
| M7950-93-S3 | Coupling, Air start with barbed fitting | 4 | |
| M7950-93S3 | AIR START COUPLING/BARBED FITTING, ROCKWELL | 4 | |
| M7950-93S5 | AIRSTART COUPLING WITH FLANGE FITTING AND STRAINER KAISER | 1 | |
| M83248-1-005 | COUPLING - QUICK DISCONNECT, STATIC SYSTEM DRAIN FITTING  | 1 | |
| MA280028-1 | ALIGNMENT TOOL, SUPERFLEX COUPLING | 1 | |
| MA280061-1 | KIT - COUPLING RING - FUEL MANIFOLD | 1 | |
| MIT-1544100-20 | COUPLING (PART OF MIT-1544100) | 1 | |
| MIT65B04017 | LUBE ADAPTER SET - FLAP LEADING EDGE TORQUE TUBE COUPLING | 4 | |
| MS24203 | COUPLING-GREASE GUN SHAFER TYPE NOZZLE | 9 | |
| MS24203-1 | NOZZLE - COUPLING, GREASE GUN, SHAFER TYPE NOZZLE - THREAD 1/8" | 12 | |
| N-2009-04-S | NITROGEN SRVICING REGULATOR HOSE ASSY FOR DOOR DAMPER SERVCING HOSE COUPLING.CONNECTOR MAIL. SEAL FLASHSHER | 1 | |
| N-2422-02 | COUPLING, HALF | 1 | |
| N-2530 | HALF, COUPLING W/DUST CAP | 2 | |
| N-2608-01 | COUPLING, HALF Q.D | 1 | |
| N-2707-05-E17 | NIPPLE, COUPLING HALF -12 | 2 | |
| N-2707-07-E17 | NIPPLE, COUPLING HALF -20 | 2 | |
| N-2708-05-E17 | CAP, COUPLING HALF -12 | 2 | |
| N-2708-07-E17 | CAP, COUPLING HALF | 1 | |
| N/A | SET OF QUICK DISCONNECT COUPLINGS FOR A320 | 5 | |
| N2422-02 | HALF COUPLING, | 1 | |
| N2530 | COUPLING: HALF,W/DUST CAP, | 2 | |
| N2707-05E17 | COUPLING: HALF,AL,3/4IN, | 2 | |
| N2708-05E17 | CAP: COUPLING,HALF, | 2 | |
| NB70243 | HIGH PRESSURE QUICK FIT COUPLING SET | 1 | |
| NT-738-38-0477 | REFILLING COUPLING | 1 | |
| NV592009-3 | HOSES 3/8 YELLOW MALE FEMALE COUPLING 25 MTS | 1 | |
| OMG 250 5-7 | COUPLING HALF - BULKHEAD | 1 | |
| OMP 2505-3 | OVERFLOW COUPLING | 12 | |
| OMP 2506-3 | (OVERFLOW COUPLING) AND (FILL COUPLING)" | 22 | |
| OMP-2506-3 | COUPLING HALF | 22 | |
| OMP2505-2 | Coupling Half - Bulkhead | 15 | |
| OMP2505-3 | COUPLING HALF - HOSE | 12 | |
| OMP2505-5 | CSD OVERFLOW HOSES WITH COUPLING | 4 | |
| OMP2506-02 | COUPLING MALE BULKHEAD HALF | 1 | |
| OMP2506-2 | Coupling Half - Bulkhead | 14 | |
| OMP2506-3 | Coupling Half - Hose | 22 | |
| OMP2506-5 | HALF COUPLING | 7 | |
| OMP2506-9 | COUPLING, HALF | 3 | |
| OU190364 | COUPLING FILL OIL ID | 23 | |
| PC1006 | REFILL COUPLING | 19 | |
| PF-55951 | OVERFLOW HOSE AND COUPLING | 6 | |
| PF53361-2P | DISPENSER - ENGINE, CSD, AND STARTER OIL; 2 GAL. CAPACITY WITH PUMP; 7 FT. HOSE; OMP COUPLING WITH 53175 CSD WET SPLINE (MALABAR INTERNATIONAL) | 4 | |
| PF55951 | Overflow Hose Assy (With Coupling) | 6 | |
| PN 314150 | COUPLING, GREASE GUN, SHAFER TYPE NOZZLE - THREAD 1/8" NPTF(F)SIMILAR (WHICH COMPLY WITH STANDARD MS24203-1) | 1 | |
| PWA 25533 | DRIFT-ENGINE ASSY LPT COUPLING FAN | 2 | |
| PWA25000 | WRENCH - ENGINE ASSEMBLY LPT COUPLING AT FAN | 1 | |
| PWA25253 | WRENCH - AGB BEVEL G/SFT COUPLING NUT_[PWA25253] | 2 | |
| PWA25394 | HOLDER - MGB STTR G/SFT COUPLING_[PWA25394] | 2 | |
| PWA25448 | DRIFT - T/S/COUPLING BRG & SEAL_[PWA25448] | 2 | |
| PWA25454 | EYE - TURBINE SHAFT FRT COUPLING_[PWA25454] | 2 | |
| PWA25533 | DRIFT - ENG ASSY LPT COUPLING/FAN_[PWA25533] | 2 | |
| PWA26225 | EYE - TURBINE SHAFT COUPLING, REAR_[PWA26225] | 2 | |
| PWA28891 | FIXTURE - COUPLING, TURB SHAFT I/RACE_[PWA28891] | 2 | |
| PWA29614 | WRENCH-MECHANICAL FAN COUPLING NUT (SWE) | 1 | |
| PWA45011 | EXTRACOR -LPT SHAFT COUPLING NUT RE | 1 | |
| PWA45014 | FRONT COMPRESSOR COUPLING WRENCH | 1 | |
| PWA52671-4 | SHAFT, COUPLING | 1 | |
| PWA85306 | PULLER-KNOCKER,FAN LPT COUPLING PLUG | 7 | |
| PWC32109 | DRIFT, COUPLING | 4 | |
| PWC34061 | GAGE COUPLING SHAFT (PRE-SB3277) | 6 | |
| PWC34161 | GASE COUPLING SHAFT (POST-SB3277) | 4 | |
| PWC34727 | Puller, Propeller Shaft Coupling | 1 | |
| PWC57476 | SHAFT COUPLING SCD | 1 | |
| PWC64820 | Coupling Shaft | 1 | |
| PWC70732 | ENGAGE COUPLING SHAFT | 1 | |
| PWC72078 | Flush Pine Gauge Coupling | 3 | |
| PWC72457 | COUPLING SHAFT | 1 | |
| PWC76258 | Shaft Coupling | 1 | |
| PWC76264 | Coupling Shaft Bolts | 1 | |
| QDC-139 | KIT OF QUICK DISCONNECT COUPLINGS FOR AW139 AW169 AW189, COMPLETE OF ADAPTERS FOR 2 DELIVERY AND 2 R | 1 | |
| R-1496 | ADAPTER, FILL COUPLING | 2 | |
| RAS-62143 | QUICK DISCONNECT COUPLING (FEMALE) | 1 | |
| RB T101464 | Engine Coupling & Pillow Block Shaft | 1 | |
| RB500N9505-1M | Notar Drive Shaft Coupling Socket (Modified) | 2 | |
| RBH5610-705-40101 | INSPECTION FIXTURE FAN ASSEMBLY TRANS & COUPLING | 2 | |
| RBT18546 | Wrench for K-Flex Coupling | 2 | |
| RBT18803 | Lower Coupling Drive Shaft Boot Installation & Removal Tool | 1 | |
| REC6F | Ionic Systems Rectus 6 mm Female Coupling | 2 | |
| REC8F | Ionic Systems Rectus 8 mm Female Coupling | 2 | |
| RF8LPDE | EXTRACTOR FOR HP COUPLING | 1 | |
| RF9810DW | SPECIAL TOOL FOR BP COUPLING | 2 | |
| RHA2134 | AFG6 High Pressure Hose Assembly 2m 4G1 Hose, XF Coupling to 8V1 Screw-On Connector | 1 | |
| RHA2135 | AFG6 High Pressure Hose Assembly 2m 4G1 Hose, XF Coupling to 12V1 Screw-On Connector | 1 | |
| RHA2136 | AFG6 High Pressure Hose Assembly 2m 4G1 Hose, XF Coupling to Single Clip-On Connector | 1 | |
| RHA2152 | AFG6 High Pressure Hose Assembly, 2m 4G1 Hose, XF Coupling to Euro 12V1 Connector | 1 | |
| RRT103901 | OVER FILL TOOL - OVERSPILL HOSE AND COUPLING ASSEMBLY | 1 | |
| RT801103 | COUPLING AIR START WITH BARBED FITTING | 2 | |
| SCA-ODA | OIL DISPENSER ADAPTER (MADE TO ENABLE OUT FILLING IN APU WITH IDG COUPLING) | 1 | |
| SG-1317271 | SELF SEALING COUPLING STYLE I | 1 | |
| SK-2043-5 | High Pressure Hose Couplings (Proof pressure: -) (Style: Replacement Seal) (Working pressure: -) (Add to cart: Add To Cart) | 1 | |
| SK-2043-C | High Pressure Hose Couplings (Proof pressure: -) (Style: Replacement Seal) (Working pressure: -) (Add to cart: Add To Cart) (Proof pressure: 10,000 psi) (Style: Gooseneck) (Working pressure: 5,000 psi) (Add to cart: Add To Cart) | 11 | |
| SK-2043-S | Dill Air Controls SK-2043-S Copper 18 NPT Female - 5,000 PSI Straight High-Pressure Hose Coupling | 2 | |
| SK-2043C | Dill Air Controls SK-2043-C Copper 18 NPT Female - 5,000 PSI Gooseneck High-Pressure Hose Coupling | 11 | |
| SLS-350PL | TRUCK - LAVATORY SERVICE - CAPACITY 350 GALLON WASTE - 200 GALLON WATER/CHARGE - HYDRAULIC LIFT PLATFORM TO 120" - HOSE WITH STRAIGHT COUPLING - MOUNTED ON A ONE TON TRUCK | 1 | |
| SLS-450-PL | TRUCK - LAVATORY SERVICE - CAPACITY 450 GALLON WASTE - 260 GALLON WATER/CHARGE - HYDRAULIC LIFT PLATFORM TO 120" - HOSE WITH STRAIGHT COUPLING - MOUNTED ON A ONE TON TRUCK | 1 | |
| SLS-500-PL | TRUCK - LAVATORY SERVICE - CAPACITY 550 GALLON WASTE - 300 GALLON WATER/CHARGE - STATIONARY PLATFORM ON TANK - HYDRAULIC LIFT OPTIONAL - HOSE WITH REEL & COUPLING - MOUNTED ON A TWO TON TRUCK | 1 | |
| SM162 | SET OF QUICK DISCONNECT COUPLINGS | 2 | |
| SM474 | Q/R FEMALE COUPLING | 1 | |
| SP-1 | SELF SEALING COUPLING | 3 | |
| SPL-5384 | Wrench - Coupling Sleeve Flap Actuation | 1 | |
| SRP-1011 | SEAL, FLATWASHER FOR COUPLING PC-1067 | 1 | |
| ST8709H | GO/NO-GO GAGE - FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 6 | |
| ST8709H-1 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 7 | |
| ST8709H-1 -2 -3 -4 -5 -6 -7 | Standard Tool -Go/No-Go Gauge. For Assembly Of Wiggins Bacc42R Coupling | 1 | |
| ST8709H-2 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-3 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-4 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 8 | |
| ST8709H-4-A | GAGE - GO/NO-GO, FUEL WIGGINS COUPLING | 1 | |
| ST8709H-5 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-6 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 5 | |
| ST8709H-7 | Standard Tool - Go/No-Go Gauge, For Assembly of Wiggins BACC42R Coupling | 6 | |
| ST8709H-KIT | GO/NO-GO GAGE FOR ASSEMBLY OF WIGGINS BACC42R COUPLING | 1 | |
| ST8709H-X | Gage - Go/No-Go, Fuel Wiggins Coupling (BACC42R); X indicates gage number -1 to -7 | 2 | |
| ST902-R | REFORM TOOL -0 FLANGE COUPLING | 6 | |
| ST902R | TOOL REFORM FLANGE COUPLING B737 PNEUMATIC DUCTS | 6 | |
| SWE 191015 | #1 BRG COUPLING FIXTURE | 1 | |
| T-304733 | Shaft, coupling | 1 | |
| T-4429K735 | COUPLING BRASS 3/4 X 3/8 FEMLE | 1 | |
| T101307 | FLEX COUPLING HOLDER SP | 1 | |
| T101555 | FACE COUPLING WRENCH, FREEWHEEL REMOVAL | 1 | |
| T472961 | COUPLING SHAFT | 1 | |
| TC3PHS111 | Cryofit − Test Coupling | 1 | |
| TE27296-01 | Shaft, Coupling, Quill | 1 | |
| TEMA 3810 | QUICK RELEASE MALE COUPLING FOR JUNIPER | 1 | |
| TF-1043-01*180 | NITROGEN SRVICING REGULATOR HOSE ASSY FOR DOOR DAMPER SERVCING HOSE COUPLING.CONNECTOR MAIL. SEAL FLASHSHER | 4 | |
| TMHGA17-20-00 | PUMP OPENING REVERSER COWL (WITH QUICK COUPLING, WITHOUT FILTER) | 1 | |
| TMY20-20-001 | BEAD FORMING TOOL KIT FOR "W-O-F" COUPLINGS | 1 | |
| TMY20-20-002 | BEAD CHECKING RING GAUGE SET FOR "W-O-F" COUPLINGS | 1 | |
| TMY20-20-302 | WRENCH SET FOR "W-O-F" COUPLINGS | 2 | |
| U10A270000A | TEST BOX FOR TRIM COUPLING SYSTEM | 1 | |
| U21800 | COUPLING FOR 1-2 SELF SEALING | 1 | |
| U21800-1 | COUPLING FOR 1-2 SELF SEALING | 4 | |
| UT1145 | ADAPTER AND COUPLING - OIL FILLER, AEROQUIP COUPLING | 1 | |
| UZ/7/1826 | DISPENSER - OIL SERVICING - 1 QT OIL CONTAINER WITH COUPLINGS FOR ENGINE, APU, IDG/CSD | 4 | |
| V0031J12-119 | WATER FILL COUPLING SIZE 12 | 1 | |
| V0031J16-018 | LAVAROTY FILL COUPLING LONG SIZE 16 | 1 | |
| V1041J016A00 | LAVATORY SERVICE FILL COUPLING, SIZE -16, STANDARD COLLAR V1041J016A00 GS-L600JA | 1 | |
| V2505J08-003 | OIL FILL COUPLING SIZE 8 RETURN LINE | 5 | |
| V2506-06-005 | Plug/Chain Assembly, Size -6, For Oil Fill Push-Pull Couplings | 6 | |
| V2506J-06-003 | COUPLING OIL FILL | 9 | |
| V2506J06-003 | COUPLING - OIL SERVICING - IDG, CSD, VSCF | 9 | |
| V2506J06-003-001 | OIL FILL COUPLING | 1 | |
| V2506J06-003-1 | OIL FILL COUPLING | 2 | |
| V7950-93-134 | Air Start Coupling with Flange Fitting | 1 | |
| V7950-93-S114 | COUPLING - AIR START WITH SAFETY SCREEN | 3 | |
| WF150-1 | DISPENSER - OIL, ONE QUART CONTAINER WITH COUPLINGS FOR ENGINE, APU, IDG/CSD | 8 | |
| WF174410 | DISPENSER - OIL, ONE QUART CONTAINER WITH COUPLINGS FOR ENGINE, APU, IDG/CSD | 4 | |
| XZT S2 | LOADING GAS NITROGEN KIT FOR SCHARADER, PRESSION TEST, NO AIR LOSS CHUCK COUPLING, XZT S2 | 1 | |
| ZA-1452H6-8-MT8 | COUPLING HALF,QUICK DISCONNECT | 1 | |
| kqc139 | KIT OF QUICK DISCONNECT COUPLINGS AND DUST CAPS FOR AW139/AW169/AW189 | 2 | |
| lC6344 | TORQUE ADAPTER SET AIR TUBE COUPLING FMF LM2500 | 1 | |
| lC6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| КHC-4005 | HYDRAULIC COUPLING KITS FOR HPU- 58331 (56331): - | 1 | |
| КHC-4006 | HYDRAULIC COUPLING KITS FOR BLENDING AIR FROM THE | 1 | |
| 1C6364G02 | TORQUE ADAPTER - FORWARD ADAPTER, COUPLING NUT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
