| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 3-F-3 | CORD , | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) XK15 | OVEN OVEN,INCLUDING RECORDER 4103C (CALIBRATION) (CALIBRATION) | 1 | |
| 04016G-10 | BELT STATION PN CS35-26 (PN 04016G-10) – COILED CORD, 26’ EXTENDED | 3 | |
| 04016G-11 | DAVID CLARK® C35-30 STRAIGHT EXTENSION CORD, 8 FT L, BLACK | 2 | |
| 1426 | POWER CORD, CHARGER (EUROPE, MIDDLE EAST, S. AMERICA, AFRICA, ASIA) | 1 | |
| 09070 | ANTI STATIC WRIST STRAP, ADJUSTABLE, 330 MM, 6 FT CORD, BLUE, SNAP, STUD | 7 | |
| 14810 | STRAP - WRIST, (GROUNDED) ADJUSTABLE ELASTIC WITH 6 FOOT COILED GROUND CORD. (DESCO INDUSTRIES INC.) | 1 | |
| 18051 | 18051 CHARGEABLE GREASE GUN, CORDLESS | 1 | |
| 100166 | CORD: AC POWER CORD - TYPE E (NORTH AND, | 1 | |
| 100242 | CORD: AC POWER CORD - TYPE E (FRANCE, BE, | 1 | |
| 100243 | CORD: AC POWER CORD - TYPE N (BRAZIL), | 1 | |
| 100244 | CORD: AC POWER CORD - TYPE L (ITALY), | 1 | |
| 100282 | CORD: AC POWER CORD - TYPE G (UK, IRELAN, | 1 | |
| 100291 | CORD: AC POWER CORD-TYPE I (AUSTRALIAN), | 1 | |
| 100292 | CORD: AC POWER CORD-TYPE H (ISRAEL), | 1 | |
| 101-01198D | CORD: POWER,110V, FOR DPS-450 & DPS-500 | 2 | |
| 1141/100 | CLEANER-VCCM ELECTRICAL RATING: 120VAC, 6.8 A, 60HZ, 100CFM POWER RATING: 1.1HP ELECTRICAL RATING: 120V, 6.8A, 60HZ, DIRT-HOG INCLUDES: FILTER BAG,1-1/4INX6 FEET HOSE, WAND, CREVICE TOOL, ROUND BRUSH POWER CORD, AND SHOULDER STRAP | 1 | |
| 12304G-04 | GROUND SUPPORT HEADSET, BLACK/GREEN, 300 OHM, 26 FT L CORD | 2 | |
| 128CEC1AAS2 | BatteryMINDer Maintenance Charger/Desulfator, Gill, Concorde Flooded, 8 A at 12 V, 4 A at 24 V | 2 | |
| 134390/6M/B | CORDPRO, 6M, STRAIGHT TO RIGHT ANGLE PLUG, BLACK | 1 | |
| 134390/6M/R | CORDPRO, 6M, STRAIGHT TO RIGHT ANGLE PLUG, RED | 1 | |
| 144180 | Extension Cord 10ft (A, BL, CL, EF, K & SS-Series) | 1 | |
| 144181 | Extension Cord 16ft (A, BL, CL, EF, K & SS-Series) | 1 | |
| 1640-120-02 | CVFDR CCU SLIMELINE CONTROLLER DUAL RECORDER W/O MIC, BLACK | 1 | |
| 16L004 | DICKSON Chart Recorder,6 In. | 1 | |
| 17-TES0076 | RECORDER INTERFACE, USB | 1 | |
| 17TES0076 | RECORDER INTERFACE, USB | 1 | |
| 17TES0078 | CABLE, CVR RECORD ON/OFF | 9 | |
| 17TES0078 | CABLE, CVR RECORD ON/OFF | 9 | |
| 17TES0700 | READ-OUT CENTER, RECORDER INTERFACE UNIT | 1 | |
| 17TES0823 | SOFTWARE, RECORDER DATA INTERFACE - SRVIVR25 | 1 | |
| 17TES0900 | FUSELAGE FAIRING SET, RECORDER DATA INTERFACE - SRVIVR25 | 1 | |
| 17TES0901 | FUSELAGE FAIRING SET, RECORDER DATA INTERFACE - SRVIVR25 | 3 | |
| 17TES0928 | SOFTWARE, RECORDER DATA INTERFACE - SRVIVR25 | 1 | |
| 17TES0929 | SOFTWARE, RECORDER DATA INTERFACE - SRVIVR25 | 1 | |
| 18028G-11 | DAVID CLARK® 18028G-11 COMMUNICATION CORD KIT, BLACK, FOR H3312 HEADSET | 8 | |
| 18253G-05 | CORD ASSEMBLY,ADAPTER | 9 | |
| 18253G-10 | CORD ASSEMBLY,ADAPTER GND SPRT | 4 | |
| 18253G-12 | CORD ASSEMBLY,ADAPTER GND-CKPT | 5 | |
| 18253G-15 | CORD ASSEMBLY,A | 3 | |
| 18253G-18 | CORD ASSEMBLY,A | 3 | |
| 18315G-02 | CABLE ASSY, MIC CORD | 8 | |
| 18644G-01 | CORD ASSY,JUMPER 8' C3408 | 1 | |
| 18747G-05 | CORD ASSY,JUMPER 12' C38- 12 | 1 | |
| 18748G-01 | CORD,POWER C3820 | 1 | |
| 18874G-01 | CORD ASSY,EXT 26' C31-26 | 5 | |
| 2021136 | 50' (15.2m) Power Cord Upgrade, HPU 1 | 1 | |
| 20582-00 | CURRENT MEASUREMENT DEVICE, WITHOUT RECORDING DEVICE, FOR AIRCRAFT REPAIR. | 1 | |
| 215371-0 | CONTROL,PRESSURE,RECORDIN | 1 | |
| 22397G-04 | CORD: EXTENSION,COMM | 10 | |
| 22397G04 | CORD: EXTENSION,COMM | 10 | |
| 22607G-01 | KIT,OVHD CORD ASSY | 9 | |
| 22FH97 | LED RECHARGEABLE HAND LAMP, 5.4 LAMP WATTS, CORDLESS CORD LENGTH, BLACK/RED | 1 | |
| 22FH99 | CORDED HAND LAMP,90 LED,25 FT CORD | 1 | |
| 2311-011 | EXTENSION CORD ROLLER 20MM, 25M | 1 | |
| 2312-026 | EXTENSION CORD ROLLER 20MM, 25M | 1 | |
| 233A3208-2 | MODULE: TEST,FLT RECORDER,SVC, USE 233A3208-2=AG | 1 | |
| 2556-22 | CORDLESS, RATCHET, 12V DC, 40 FT-LB FASTENING TORQUE | 1 | |
| 2559-21 | CORDLESS, RATCHET, 12V DC, 40 FT-LB FASTENING TORQUE | 1 | |
| 2YKN3 | HAND LAMP: LED, 25 FT POWER CORD LG,500 LM MAX BRIGHTNESS, 500 LM BRIGHTNESS LEVELS, 7.5 W | 1 | |
| 332A91318010 | CORD,SECURING L300MM | 1 | |
| 3402936- | ADAPTER CORD, "Y", INTERCOM | 1 | |
| 3402936-1 | ADAPTER CORD, "Y", INTERCOM | 1 | |
| 365EH/FB | HIGH INTENSITY, (3) UV-A LEDS, (1) WHITE LIGHT LED WITH FP-600 BOROFLOAT FILTER PROTECTOR, HEAVY-DUTY 8 FOOT AC CORD, UVS-30 SPECTACLES AND SOFT CARRYING CASE (230V/50HZ WITH EURO PLUG) (PLUG TYPE F) (CE APPROVED) MAKE-SPECTRO-UV -USA | 1 | |
| 4169 | CHARGER: BATTERY, BC9000 CONCORDE BATTERY | 8 | |
| 4650 | WRIST STRAP WITH 4MM SNAP AND 5' COIL CORD, BLUE 1 | 3 | |
| 37475 | C2G FIBER PACH CORDS LC-ST, SINGLE-MODE | 1 | |
| 40353G-01 | CORD, HEADSET EXTENSION (50 FEET) | 5 | |
| 40417G24 | CORD,RADIO ADAPTER/PTT C6035 | 1 | |
| 4072-154 | CORDLESS DRIVER/DRILL SET, DF333DSAE 12V/2,0 AH INCL. 2 PCS ACCU 2.0 AH CHARGER | 1 | |
| 41035G-06 | PUSH-BACK INTERFACE CORD, 7-PIN | 1 | |
| 41F9TR-8100 | Coiled Cord (for CL, SS, ESD, A, BL, K & EF Drivers) | 1 | |
| 4340-5-0050 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 4340-5-0100 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 4340-5-0175 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 5-62887-1 | INTERCOM GROUND CORD, REF:5-62887-1 | 1 | |
| 502143-02 | CORD, POWER, CROSS DOMAIN GUARD | 1 | |
| 58917 | CORDLESS ANGLE TORQUE NUTRUNNER 3/8" 15 - 35 Nm (11,06 - 25,81 Lb.ft) | 1 | |
| 6310T14 | CLEANER-VCCM ELECTRICAL RATING: 120VAC, 6.8 A, 60HZ, 100CFM POWER RATING: 1.1HP ELECTRICAL RATING: 120V, 6.8A, 60HZ, DIRT-HOG INCLUDES: FILTER BAG,1-1/4INX6 FEET HOSE, WAND, CREVICE TOOL, ROUND BRUSH POWER CORD, AND SHOULDER STRAP | 1 | |
| 64825 | DRIFT, OUTER ROCKER SHAFT BUSHING INSTALLATION MANUFACTURE ACCORDING TO THE SIZE OF THE HUB | 1 | |
| 66508 | CORDLESS SCREWDRIVER WITH LI-ION BATTERY 3,6 V (110-220 V) | 1 | |
| 67194 | CORDLESS SCREWDRIVER WITH LI-ION BATTERY AND PLASTIC SUPPORT 3,6 V (110-230 V) | 1 | |
| 520309 | CORD: G F, | 1 | |
| 625643 | Magnaflux AC/DC Electromagnetic Yoke, 12 ft L Cord, 115 V, 6 A, 60 Hz | 3 | |
| 625644 | Magnaflux 625644 AC/DC Electromagnetic Yoke, 220/230 V, 2/6 A, 50/60 Hz, 12 ft L Cord | 4 | |
| 628554 | Magnaflux 628554 AC Electromagnetic Yoke Assembly, 110 to 115 V, 4.3/6.3 A, 50/60 Hz, 12 ft L Cord | 2 | |
| 4933441675 | CORDLESS GREASE GUN 19,2V LITHIUM | 1 | |
| 7-262100009-601 | CORD ASSEMBLY ELECT,MAINTENANCE | 1 | |
| 703A91000002 | CORD,SECURING L300MM | 1 | |
| 703A91‐0000‐02 | CORD,SECURING L300MM | 1 | |
| 703A91‐0000‐03 | CORD,SECURING L300MM | 1 | |
| 7468K42 | MULTI-OUTLET EXTENSION CORD FOR HARSH ENVIRONMENTS, 25 FEET LONG WITH POWER LIGHT | 1 | |
| 802-0208 | DOWNLOAD UNIT, FLIGHT DATA RECORDER | 2 | |
| 8280D | DRILL, DRIVER, CORDLESS, 1/2 | 1 | |
| 856A1275 | GAGE, CORD LENGTH HPCR BLADE | 1 | |
| 856A1275G04 | GAGE, CORD LENGTH HPCR BLADE | 6 | |
| 9122001 | CORDLESS DRIVER/DRILL SET, DF333DSAE 12V/2,0 AH INCL. 2 PCS ACCU 2.0 AH CHARGER | 1 | |
| 9300A860 | TEST PANEL, RECORDER | 1 | |
| 956A6569G01 | Set,torque-oil tube,lpt rear frame kit cle raccord huile | 1 | |
| 956A6569G02 | Set,torque-oil tube,lpt rear frame kit cle raccord huile | 1 | |
| 964-0434-042 | RECORDER TO EXTRACT, CONVERT AND DISPLAY | 1 | |
| 964-0446-001 | DOWNLOAD UNIT - FLIGHT RECORDER SYSTEM (HONEYWELL, INC) | 19 | |
| 98A24403000000 | STRAP, POWER CORD | 31 | |
| 98A2520750300 | TOOL,PULLERY ASSY.SEALING CORD A300 | 1 | |
| 98A25207503000 | ASSY PULLEY, SEALING CORD, CEILING BOX | 30 | |
| 98D27303022001 | TOOL CHECK - DIGITAL, AILERON ELEVATOR RUDDER/AUTO RECORDING FUNCTION | 11 | |
| 99251-3261132-0105 | OVERHAUL OBOGS CONCETRATOR OF OXYGEN GENERATOR SYSTEM (DUE TO HAVING A BROKEN HOSE COUPLER, IN ACCORDANCE WITH THE MAINTENANCE MANUAL) | 1 | |
| A31007 | ADAPTER CABLE-TESTER,DIGITAL FLIGHT RECORDER SYSTEM | 1 | |
| A31007-1 | Adapter Cable - Tester, Digital Flight Recorder System | 2 | |
| A31007-30 | Adapter Cable - Tester, Digital Flight Recorder System | 3 | |
| A31007-39 | Adapter Cable - Tester, Digital Flight Recorder System | 1 | |
| A31007-49 | Adapter Cable - Tester, Digital Flight Recorder System | 6 | |
| A31007-59 | Adapter Cable - Tester, Digital Flight Recorder System | 17 | |
| AFNDT-2072AL | 5 STEP ALUMINUM WEDGE. Step Sizes: .600", .700", .800", .900" ,1.00", Tolerance: +/- .001'. Material: 2024-T3 Aluminum. Pad Size: 1.0"X1.0" Sq. 5.0"x1.0" LONG. Includes certification report traceable to NIST. Manufactured in accordance to Airbus A33 | 1 | |
| AFNDT-2127 | SAFRAN MESSIER -BUGATTI-DOWTY REFERENCE STANDARD Material aluminum 7075-T6; Thickness 1/2". - Number of holes 5;- hole diameter 9/16 in, 10/16 in, 11/16 in, 12/16 in, 13/16 in; EDM notch in each hole: thru the thickness, depth and width in according with | 1 | |
| AFNDT-2129/BASE | EDM notch in each hole: thru the thickness, depth and width in according with SPM 32-09-01 figure 64. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3152CS | 5 Step Wedge Manufactured in Accordance with ASTM E797/E797M-15.Step Sizes: .100", .200",. 350", .500", 1.000" MATERIAL: 1018 Carbon Steel. Pad Size: 0.750" X 0.750" TOLEREANCE = +/- .002. NICKEL PLATED CORROSION RESISTANT COATING. Includes measure... | 1 | |
| AFNDT-3152SS | 5 Step Wedge Manufactured in Accordance with ASTM E797/E797M-15.Step Sizes: .100", .200",. 350", .500", 1.000" MATERIAL: 304 Stainless Steel. Pad Size: 0.750" X 0.750" TOLEREANCE = +/- .002. Includes measurement Certification for the .750" Block wi... | 1 | |
| AFNDT-3320AL | 6 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-02 Part 6 Procedure 1 or 2. Hole Sizes: 15/32", 17/32", 9/16", 11/16", 5/8", 3/4" ( .020" x .020" x .005" +/- .002), ( .030" x .030" x .005" +/- .002 | 1 | |
| AFNDT-3321AL | 5 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-16 Part 6 Page 9 Figure 3. Hole Sizes: 11.5mm, 14.4mm, 14.6mm, 17.4mm and 17.5mm. Corner EDM Notches ( .020" x .020" x .005" +/- .002), ( .030" x .0 | 1 | |
| AFNDT-3348/TA6V | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. Manufactured in Accordance to ASTM E797 | 1 | |
| AFNDT-3471AL | Custom Eddy Current Bolt Hole Calibration Standard Manufactured in Accordance with Airbus Specification 51-63-04. Total of 14 Hole Sizes x 4 For a Total of 56 Holes: Diameters 13.5mm(.531"), 14.1mm(.555"), 14.3mm(.563"), 15.0mm(.591"), 15.8mm(.622"), ... | 1 | |
| AFNDT-3472AL | Custom Eddy Current Bolt Hole Calibration Standard Manufactured in Accordance with Boeing Specification 51-00-00. Total of 14 with 28 EDM Notches. Hole Sizes: Diameters 13.5mm(.531"), 14.1mm(.555"), 14.3mm(.563"), 15.0mm(.591"), 15.9mm(.625"), 16.7mm(... | 1 | |
| AFNDT-3531/2014-T6 | 13 HOLE REFERENCE STANDARD, 2014-T6 Aluminum. HOLE SIZES: 5/32", 3/16", 7/32" 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4", MId-Wall EDM Notch = .060"L x .030D x .004" ± .001". Manufactured in accordance to Aircraft Braking System... | 1 | |
| AZ421 | KODAK PIXPRO DIGITAL CAMERA, Li-Ion Battery 4 GB SD CARD / inside of Camera, USB Battery Charger Data Sync Cable Cord, AC Adapter Power Plug | 1 | |
| B0BHD7B7K3 | ELECTRICAL EXTENSION CORD, 50 FOOT LONG, 14 AWG | 1 | |
| B48-0 | CORD-PATCH,BLACK 48 INCHES | 1 | |
| B48-2 | CORD-PATCH,RED 48 INCHES | 2 | |
| B48-5 | CORD-PATCH,GREEN 48 INCHES | 1 | |
| BC8000 | BATTERY CAPACITY TESTER/ANALIZER, P/N : BC8000, (CONCORDE) | 4 | |
| BK6500 | BORESCOPE, RECORDING | 3 | |
| BP860MP | SOLDERING IRON, CORDLESS | 2 | |
| C31-26 | CORD-EXTENSION, HEADSET | 4 | |
| C31-50 | CORD - HEADSET, 50 FT. LONG (DAVID CLARK COMPANY, INC.) | 4 | |
| C35-26 | CORD EXTENSION, 26 F | 11 | |
| C35-30 | DAVID CLARK HEADSET STRAIGHT CORD, C35-30 | 7 | |
| CABLE | POWER CORD, | 3 | |
| CDI95095 | POWER CORD, U.K. & IRELAND | 1 | |
| CDR6850 | DRILL KIT, CORDLESS | 3 | |
| CDR6850DB | DRIVER/DILL, CORDLESS, 18 V, SLIDE ON BATTERY, 1/2 | 1 | |
| CEC172137-0060 | Cord, Accessory | 1 | |
| CEC172138-0060 | Cord, Power 100V | 1 | |
| CIX317G/25-YK | CORD, HEADSET EXTENDSION | 3 | |
| CIYJYP-10 | CORD, HEADSET EXTENSION (10FT) (OPTION) | 1 | |
| CIYJYP25 | CORD, HEADSET EXTENSION (25FT) (OPTION) | 1 | |
| CIYJYP50 | CORD, HEADSET EXTENSION (50FT) | 3 | |
| CIYJYP50 | CORD, HEADSET EXTENSION (50FT) | 3 | |
| CP1-CED-330 | E-DRILL, UNIVERSAL HAND TOOL, WITH REPLACEABLE GROUND PIN AND 30 FT. INTEGRAL CORD. (TRI-WING) | 1 | |
| CP1-CEDKIT-320 | E-DRILL, UNIVERSAL HAND TOOL, WITH REPLACEABLE GROUND PIN AND 30 FT. INTEGRAL CORD. (TRI-WING) | 1 | |
| CT761O | IMPACT WRENCH, CORDLESS | 1 | |
| CT8850O | IMPACT WRENCH, CORDLESS | 1 | |
| CTFL9050 | 18VMONSTERLITHIUM, 2700LUMENS CORDLESS FLOODLIGHT | 1 | |
| CTLAR761 | 14.4 V MICROLITHIUM CORDLESS 500 LUMEN ANGULAR LIGHT, RED | 1 | |
| CTS561CL | SCREWDRIVER, CORDLES | 1 | |
| CTS761 | SCREWDRIVER, CORDLESS | 1 | |
| DCC2560T1 | DEWALT FLEXVOLT 60V MAX* AIR COMPRESSOR KIT, CORDLESS, 2.5 GALLON (DCC2560T1) | 1 | |
| DCD710S2 | DeWALT - 12 Volts, Lithium-Ion Battery, 3/8 Inch Keyless Chuck, Pistol Grip Cordless MSC 78841772 | 2 | |
| DCD771C2 | COMPACT AND LIGHTWEIGHT CORDLESS DRILL WITH A 2-SPEED TRANSMISSION, IDEAL FOR VARIOUS DRILLING TASKS. | 1 | |
| DCD780L2-QW | DRILL DRIVER CORDLESS 18V, WITH BATTERIES | 1 | |
| DCD940KX/DC9096 | CORDLESS DRILL DRIVER KIT, 18.0V | 1 | |
| DCE530B | CORDLESS HEAT GUN WITH ADJUSTABLE TEMPERATURE SETTINGS, IDEAL FOR VARIOUS APPLICATIONS. | 1 | |
| DCF510GE1 | DEWALT 20V MAX XR BRUSHLESS CORDLESS RATCHET SET, 3/8" AND 1/2" | 1 | |
| DCG413B | CORDLESS ANGLE GRINDER WITH A BRUSHLESS MOTOR FOR IMPROVED EFFICIENCY AND RUNTIME, IDEAL FOR METAL CUTTING AND GRINDING. | 1 | |
| DCGG571M1 | DEWALT 20V MAX GREASE GUN KIT, CORDLESS | 2 | |
| DCK940D2 | TOOL KIT COMBO, CORDLESS, 20V, 9 PCS | 1 | |
| DPP-50 | TENSIOMETER, RECORDING 0 - 50 LB-IN. (0 - 445 NM) | 6 | |
| E12248AAS2 | BatteryMINDer Maintenance Charger/Desulfator, Gill Flooded Wet Cell and Sealed, Concorde Flooded | 4 | |
| E24041AAS2 | BatteryMINDer Maintenance Charger/Desulfator, Gill, Concorde CB, 8 A, 24 V, 50/60 Hz, 5.516 in L | 2 | |
| E54-310-03 | KIT CORD REEL ASSY GRAY 19,24 | 1 | |
| ECU5000 | UTILITY LIGHT, HAZARDOUS DUTY, EXPLOSION PROOF, 26-WATT, 25’ CORD (120VAC) | 1 | |
| ECWS61M-1 | WRIST STRAP WITH 4MM SNAP AND 5' COIL CORD, BLUE 1 | 7 | |
| ELECTRICSCISSORS | SCISSORS-CORDLESS, 18.5CM, EU PLUG | 1 | |
| EPA EU-15 | COIL EXTENSION CORD FOR 220V ( HELIX VERSION), UP TO 20M LONG | 1 | |
| EPA EU-25 | COIL EXTENSION CORD FOR 220V, UP TO 30M LONG | 1 | |
| EU-15 | COIL EXTENSION CORD (SNAIL) FOR 220V, UP TO 20M LONG MODEL EPA EU-15 | 1 | |
| EU-25 | COIL EXTENSION CORD FOR 220V, UP TO 30M LONG MODEL EPA EU-25 | 1 | |
| FBPT-RQX8-S | Patch Cord Tip - Fiber Optic, Quadrax, Socket | 1 | |
| FBPT-U12M | PATCH CORD TIP - INSPECTION, FIBER OPTIC (1.25 MM GENERIC LC) | 2 | |
| FBPT-U12M-N | UNIV 1.25MM, PATCHCORD NARROW TIP | 2 | |
| FBPT-U25M | TIP - FIBER OPTIC, PATCH CORD, 2.5MM | 2 | |
| FMI-100C5 | FORCE GAGE, PUSH/PULL GAGE RANGE 0-50LBS PULLFORCE, PEAK FORCE RECORDING | 1 | |
| G600-200028-1 | TOOL, UNIVERSAL RECORDER HOLDING FIXTURE | 1 | |
| GA47856 | CORD, ELECTRIC | 1 | |
| GE USM GO Flaw and Thickness detector | GE USM GO Flaw and Thickness detector - Ultrasonic flaw detector & thickness gauge, Backwall Echo Attenuator (BEA) helps to find very small defects improving detectability, Video recording upto 8 minutes | 1 | |
| H-895 | ANTI STATIC MAT W/CORD, SIZE 3X5, THICKNESS 3/8 | 1 | |
| H3310 | HEADSET - SHIELDED MICROPHONE WITH PUSH-TO-TAIK SWITCH, 30 INCH STRAI HT CORD | 10 | |
| H3312 | HEADSET: GSE,W/MUFF,25FT CORD, PJ-051 PLUG,W/PTT | 13 | |
| H3335 | GROUND SUPPORT HEADSET, BLACK/GREEN, 300 OHM, 26 FT L CORD | 6 | |
| H3530 | DAVID CLARK HEADSET, P/N: 12508G-34; MODEL: H3530, BELT STATION C35-30 STRAIGHT CORD | 9 | |
| HSB2344 | TRANSDUCER, ULTRASONIC TEST CORD | 1 | |
| IA2265-1-V0 | CORD: POWER,110V, FOR DPS-450 | 4 | |
| IA2265-1V0 | Barfield IA2265-1V0 Power Cord, 110 V, For Aircraft | 4 | |
| KF720-CI | CORDLESS GREASE GUN 19,2V LITHIUM | 1 | |
| LEV-155 | PROP TIE/EXHAUST COVERS, bungee cord detail (set of 4) | 1 | |
| LEV-160 | PROP TIE/EXHAUST COVERS, bungee cord detail, (-41 & -42 Engine Installation/RDD Enterprise Mod) (set of 4) | 1 | |
| LG | TENSIOMETER, RECORDING 0 - 50 LBF 0 - 222 N | 1 | |
| LG-050 | TENSIOMETER, RECORDING | 8 | |
| LHPW-1L | DC POWER AND AUDIO CORD, STRIPPED ENDS | 1 | |
| M11972-2 | LACING CORD, NYLON | 1 | |
| MA3000TS | Temp Plate, Measures and records battery temp prevents overheat, alerts made | 3 | |
| MC-SC-50-E-85 | PATCHCORD, MODE CONTROL, SC TO SC | 1 | |
| MIL-90 DEG CORDLESS | 90 DEG CORDLESS-DRILL,LOAN TOOL | 1 | |
| MIL-C-5040 | TOOL-CORD, ACFT WHINDSHIELD INST REMOVAL 5000 CM² | 1 | |
| MIL-CORDLESS-DRILL | CORDLESS-DRILL,LOAN ITEM | 1 | |
| MIL-T-43435B | LACING CORD MIL-T-43435B (3 BLACK COLOR, 3 NATURAL COLOR) | 1 | |
| N1304B-1 | TEST SET, SELCAL ENCORDER | 4 | |
| NRK-3AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. All Standards Manufactured in Accordance with U.S.A.F. ... | 1 | |
| NSA8420-7 | CORD,LACING | 1 | |
| PAL-STDP-308 | CVFDR FDAU TEST HARNESS (COCKPIT VOICE & FLIGHT DTA RECORDER - FLIGHT, DATA ACQUISITION UNIT) TEST HARNESS | 1 | |
| PH04Z | 12V MAX CXT LITHIUM-ION CORDLESS 3/8" HAMMER DRIVER-DRILL, TOOL ONLY | 1 | |
| PT4000-220 | RIVETER, CORDLESS | 1 | |
| PV1597A | TEST SET, FLIGHT DATA RECORDING SYSTEM - SEDA | 3 | |
| Proceq Schmidt Hammer Concrete Hardness Tester | Proceq Schmidt Hammer Concrete Hardness Tester - Concrete hardness tester, Type N hammer is designed for testing concrete items 4’ (100 mm), Type NR hammer provides a record of test data | 1 | |
| QAR200-35-04 | RECORDER, QUICK ACCESS | 1 | |
| QCN2P08Q4K2 | 1/4" HEX CORDLESS CLUTCH SCREWDRIVER (3–8 NM), 2 BATTERIES 20V & 1 CHARGER | 1 | |
| R80 | CLEANER, VACUUM - CABIN INTERIOR 115V/400 HZ (OR 60 HZ) COMPACT MODEL 20" X 9" X 12" INCLUDES LONG CORD COMPLETE SET OF (RIVERS AIRCRAFT VACUUM CO.) | 1 | |
| RD-AM9530 | TAPE,SOUND RECORDING | 1 | |
| RECORDER, STRIP CHART | RECORDER, STRIP CHART | 1 | |
| RSB140 | NUMATIC VACUUM CLEANER, BACK PACK, CORDLESS | 1 | |
| SA070810 | AC ADAPTER CORD FOR CUI P/N DMS090110X-P5-ET I.T.E POWER SUPPLY, 5 FEET, WITH LED INDICATOR, REPLACEMENT | 1 | |
| SPECTROLNF-Q210 | INCLUDING LNF Q210 OPTICAL PARTICAL, SOFTWARE, USER MANUAL CONNECTION CABLES AND POWER CORD, REQUIRES SA1015 STANDARD ACCESSORY KITS | 1 | |
| STD-1248 | CORD - 2 FOOT, 50 LB WORKING LOAD | 1 | |
| T-277-576 | CORD, ELECTRICAL POWER, 50 FT. | 1 | |
| TK2386-1/935 | TEST CABLE, COCKPIT VOICE RECORDER (CVR) | 1 | |
| TS-UA1401-01 | TEST SET - ARINC 717 / ARINC 573. FOR BOEING 737, 757, & 767 FLIGHT RECORDER SYSTEM TEST. | 2 | |
| U800-50 | CORD: POWER,GPU 400,50FT, GT28-400CL | 2 | |
| UCR-2-3-0 | TESTER, FLIGHT DATA RECORDER TES9468 | 1 | |
| UCR-2-3-1 | RECORDER - COPY, UNIVERSAL (FOR SOLID STATE DFDR'S ONLY). | 1 | |
| WX2300 | RECORDER, X-Y, MULTI-RANGE, ±0.25% FULL SCALE ACCURACY | 1 | |
| XC2202MB | PUMP, HYDRAULIC 0-10000 PSI - CORDLESS | 3 | |
| XFDOLZ | DRILL,CORDLESS | 1 | |
| XVR02Z | 18V LXT LITHIUM-ION CORDLESS RIVET TOOL, CAPABLE OF SETTING A VARIETY OF RIVET SIZES. | 1 | |
| YA734A | GUN - GREASE USED WITH FITTING, LUBRICATION-FLUSH TYPE: 1/8"NPT FEMALE, ACCORDING NAS 516-1A | 5 | |
| 22FH99 | CORDED HAND LAMP,90 LED,25 FT CORD | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
