| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 70361-03004-102 | COOLER | 1 | |
| 70361-03004-103 | COOLER | 1 | |
| AGE-00834-401 | COOLER | 5 | |
| D1876-5000A | COOLER | 1 | |
| HC-1388-01 | COOLER | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98L36103000000 | EXCHANGR EXCHANGER PRECOOLER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C36004-1 | Precooler R/I Eqpt - Engine on (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J36020-1 | R/I EQPT - PRECOOLER, GE90 ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| 04-6052-0000 | CRANE (LIFTER-MULTI) PRECOOLER | 2 | |
| 1-040-0343 | CONTROL PANEL TO COOLER CABLE, 8 PIN CONNECTOR 50F | 1 | |
| 1019-101 | ENGINE/OIL COOLER INLET PLUGS (set of 2) | 1 | |
| 1020933-2 | BUFFER AIR COOLER, | 1 | |
| 1023264-4 | GENERATOR FUEL-OIL COOLER (IDG FOC) | 1 | |
| 10845A | OIL COOLER FUEL COOLED | 1 | |
| 1159GSE50034-1 | INTEGRATED DRIVE GENERATOR OIL-COOLER PROTECTIVE COVER (8600138) : GSE7200823 | 1 | |
| 11C4472 | FIXTURE - INSTALL/REMOVE-COOLER OIL-AIR COOLED | 1 | |
| 11C4472G01 | SPL-11575 - FIXTURE - REMOVE/INSTALL, AIR COOLED OIL COOLER | 1 | |
| 11C4472G02 | SPL-11575 - FIXTURE - REMOVE/INSTALL, AIR COOLED OIL COOLER | 1 | |
| 11C4593 | COVER - PROTECTIVE - OIL COOLERS (3-PC) | 1 | |
| 11C4593G01 | COVER,SURFACECOOLERPROTECTIVE | 2 | |
| 11C4593G02 | COVER, SURFACE COOLER PROTECTIVE | 5 | |
| 11C4593G02-1 | COVER, SURFACE COOLER PROTECTIVE | 1 | |
| 11C4593G02-2 | COVER, SURFACE COOLER PROTECTIVE | 1 | |
| 11C4593G02-3 | COVER, SURFACE COOLER PROTECTIVE | 1 | |
| 11C4593G02-4 | COVER, SURFACE COOLER PROTECTIVE | 1 | |
| 11C4593G02-5 | COVER, SURFACE COOLER PROTECTIVE | 1 | |
| 11C4593G02-6 | COVER, SURFACE COOLER PROTECTIVE | 1 | |
| 129666-3 | SENSOR-PRECOOLER CONTROL VALVE | 1 | |
| 15AC-105 | CARB or OIL COOLER PLUG | 1 | |
| 160366-2 | REGULATOR, AIR/OIL TEMPERATURE, OIL COOLER, APU | 1 | |
| 177-103 | OIL COOLER INLET PLUG (RG models, Copilot Side) | 1 | |
| 1900C-110 | ENGINE INLET PLUGS & OIL COOLER PLUGS (set of 4) | 1 | |
| 1900D-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| 1945-04-08-07 | 30PSI PRRECOOLER GAUGE | 2 | |
| 196T09290-401 | PIN-GUIDE,PRECOOLER | 1 | |
| 206-101 | ENGINE INLET PLUGS (206H - '98 & up, w/oil cooler inlet plug) (set of 3) | 1 | |
| 212-104 | OIL COOLER INLET PLUGS (aft of main engine inlet) (set of 2) | 1 | |
| 215T61904-4 | OIL COOLER | 1 | |
| 2341178-2 | PRECOOLER ASSY | 1 | |
| 2341240-1 | PRE-COOLER | 1 | |
| 27-1-4843 | Cover APU Oil Cooler Outlet | 1 | |
| 2724301 | TRENT PRE-COOLER DRILL TOOL | 1 | |
| 2724505A | TRENT PRE-COOLER DRILL TOOL | 1 | |
| 28-0-4090 | COVER - APU OIL-COOLER OU | 1 | |
| 2C14961P01 | DUMMY IDG COOLER | 1 | |
| 2MIT65B90101-1 | INSTAL TEMPLATES - PRECOOLER O/F/V_[2MIT65B90101-1] | 1 | |
| 2OHME65B00719 | REMOVAL AND INSTALLATION TOOL - ENGINE PRECOOLER | 1 | |
| 3-000-0742 | COOLER ASSY TUBEHEAD CABLE, 10PIN CONNECTOR 100FT | 1 | |
| 30E54-1 | HOUSING, OIL COOLER | 1 | |
| 314STD-79-0001 | OIL – REPLACEMENT OF THE OIL COOLER MOUNTING SUPPORT BOLTS | 1 | |
| 3200674-2 | COOLER, OIL AIR COOLED | 1 | |
| 3289562-4 | PRE COOLER VALVE | 1 | |
| 3289562-5 | PRE COOLER VALVE | 1 | |
| 3289562-6 | PRE COOLER VALVE | 1 | |
| 337-115 | FORWARD ENGINE INTERCOOLER PLUGS (RILEY CONVERSION) (set of 2) | 1 | |
| 3404000-1 | PLUG SET ASSY OIL COOLERINTAKE | 1 | |
| 36-EM152T | PRECOOLER LEAK CHECK KIT | 1 | |
| 3732A010000 | PRECOOLER | 1 | |
| 39995-03 | HOSE OIL COOLER OUTLET 18L | 1 | |
| 3MIT65B90101 | LOCATING TOOL - PRECOOLER OUTFLOW VALVES, JT9D | 1 | |
| 4041450 | COOLER PUMP 4 BAR TVU 138/73 + MANOMETR | 1 | |
| 4046600 | COOLER ADAPTER UNI UA 60J | 1 | |
| 408-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| 412-107 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| 414-101 | OIL COOLER INLET PLUGS (below engine nacelle, specify size) (set of 2) | 1 | |
| 421GGS0147‐2 | PRECOOLER COVER | 1 | |
| 425-101 | OIL COOLER INLET PLUGS (on cowl side) (set of 2) | 1 | |
| 425-110 | INTERCOOLER INLET PLUGS (in wing roots) (set of 2) | 1 | |
| 441-110 | OIL COOLER/GEN AIR INLET PLUGS (on nacelle belly) (set of 2) | 1 | |
| 491B1341008-009 | FAIRING ASSY-PRECOOLER | 1 | |
| 4952169 | Cover Oil Cooler | 1 | |
| 49E19-2 | OIL COOLER | 1 | |
| 500-5832-101-1 | CART - PORTABLE EXTERNAL OIL COOLER (PEOC) | 1 | |
| 5322444 | COOLER-OIL, GENERATOR | 1 | |
| 55E61-1 | PRECOOLER | 1 | |
| 5826067-1 | COVER, OIL COOLER | 2 | |
| 5826067-1 | COVER, OIL COOLER | 2 | |
| 58P-101 | ENGINE COWL PLUGS (includes Intake, Cowl Top, Turbo Supercharger Air Inlet & Intercooler inlet plugs) (set of 14) | 1 | |
| 58P-105 | SMALL COWL PLUGS (includes Cowl Top, Turbo Supercharger Air Inlet & Intercooler Inlet plugs) (set of 10) | 1 | |
| 58P-115 | OIL COOLER PLUGS (set of 2) | 1 | |
| 58TC-101 | ENGINE COWL PLUGS (includes Intake, Cowl Top, Turbo Supercharger Air Inlet & Intercooler inlet plugs) (set of 12) | 1 | |
| 58TC-105 | SMALL COWL PLUGS (includes Cowl Top, Turbo Supercharger Air Inlet & Intercooler Inlet plugs) (set of 8) | 1 | |
| 58TC-115 | OIL COOLER PLUGS (set of 2) | 1 | |
| 636900 | OIL COOLER | 1 | |
| 652065 | GASKET-OIL COOLER | 3 | |
| 70700-20425-041 | OIL COOLER ADAPTER | 1 | |
| 72P3616102A075HOE | PRECOOLER HOIST | 1 | |
| 81231A020001 | PRECOOLER | 1 | |
| 81246B010001 | PRECOOLER EXCHANGER | 1 | |
| 833491-1 | DUCT OIL COOLER | 1 | |
| 856A3796-7 | TCS PRE-COOLER DUCT COVER AND E-SEAL | 1 | |
| 8600138 | INTEGRATED DRIVE GENERATOR OIL-COOLER PROTECTIVE COVER | 1 | |
| 8600175 | PROTECTIVE COVER, MAIN GENERATOR OIL-COOLER | 3 | |
| 40487272 | 2" WRENCH, OIL COOLER HOSE | 1 | |
| 8C2608 | COVER, PROTECTIVE - SURFACE COOLERS | 1 | |
| 8C3159 | COOLER - SEAL - ROTATING LABY AIR NO5 BRG OUTER | 1 | |
| 903-14510 | BRACKET OIL COOLER MAGNETIC PICK UP | 1 | |
| 905-14511 | INTERUPTER OIL COOLER SHAFT COUPLING AS332 | 1 | |
| 956A6056 | KIT - RESTRAIN - OIL PIPE - SURFACE AIR COOLING OIL COOLER | 1 | |
| 956A7670 | PROTECTOR - SURFACE AIR COOLING OIL COOLER & T-RING | 1 | |
| 956A8681G01 | PROTECTOR - SURFACE AIR COOLING OIL COOLER PROTECTOR (SACOCP) | 1 | |
| 956A8681G02 | PROTECTOR - SURFACE AIR COOLING OIL COOLER PROTECTOR (SACOCP) | 4 | |
| 9620720020 | FUEL COOLED OIL COOLER | 1 | |
| 98A10001000000 | COVER,BLANKING-PRE-COOLER AIR OUTLET | 3 | |
| 98A10003002000 | COVER,BLANKING-PRE-COOLER AIR OUTLET | 3 | |
| 98A10003002001 | COVER-BLANKING,PRE-COOLER AIR O | 5 | |
| 98A10003010000 | COVERS,PRE-COOLER | 1 | |
| 98A10007575000 | PLUG - APU OIL COOLER AIR OUTLET | 1 | |
| 98A10007610000 | PLUG-APU OIL COOLER AIR OUTLET | 5 | |
| 98A10009005000 | PLUG, APU OIL COOLER | 1 | |
| 98A10009009000 | PLUG, APU OIL COOLER | 1 | |
| 98A21003000000 | EXTRACTOR-BLEED AIR PRECOOLER COLD AIR INLET DUCT | 1 | |
| 98A21003002000 | EXTRACTOR-BLEED AIR PRECOOLER | 8 | |
| 98D10007513000 | COVER-OILCOOLER OUTLET,APU | 16 | |
| 98D1010H011-000 | COVER-FAN COWL AIR OIL COOLER OUTLET | 1 | |
| 98F10003901000 | PLUG-APU,OILCOOLER OUTLET | 3 | |
| 98F10007509000 | PLUG-APU,OILCOOLER OUTLET | 13 | |
| 98F10008232000 | PLUG - APU OIL COOLER | 13 | |
| 98F10009001000 | COVER APU - OILCOOLER OUTLET | 9 | |
| 98F36003005000 | PRECOOLER R/I TOOL | 3 | |
| 98F49108381000 | PROTECTION COVER-APU,OIL COOLER | 1 | |
| 98F49109001000 | PROTECTION COVER - APU OIL COOLER | 1 | |
| 98L36103000000 | EXCHANGER PRECOOLER | 11 | |
| 98S79305001000 | WRENCH (FOR OIL COOLER HOSES) | 12 | |
| 98V36003000000 | PCE bleed air precooler exchanger disassembly tool | 5 | |
| 98V36003000001 | R/I TOOL – PRECOOLER | 3 | |
| 9914402-2 | PRECOOLER ASSEMBLY | 1 | |
| A26-110 | OIL COOLER INLET PLUGS (set of 4) | 1 | |
| A341-130 | TRANSMISSION COOLER INLET PLUG | 1 | |
| A350-130 | OIL COOLER INLET PLUG | 1 | |
| A36001-1 | REMOVAL/INSTALLATION EQUIPMENT - ENGINE PRECOOLER | 1 | |
| A36001-24 | REMOVAL/INSTALLATION EQUIPMENT - ENGINE PRECOOLER | 1 | |
| A36001-44 | REMOVAL/INSTALLATION EQUIPMENT - ENGINE PRECOOLER | 10 | |
| A36001-44-MP | ENGINE EQUIPMENT-PRECOOLER | 1 | |
| A36001-45 | REMOVAL/INSTALLATION EQUIPMENT - ENGINE PRECOOLER | 5 | |
| A36001-45-MP | ENGINE EQUIPMENT-PRECOOLER | 1 | |
| A36001-51 | REMOVAL/INSTALLATION EQUIPMENT - ENGINE PRECOOLER | 2 | |
| A36022-1 | REMOVAL/INSTALLATION EQUIPMENT - RB211 PRECOOLER | 1 | |
| AA5-105 | CARB. AIR or OIL COOLER INLET PLUG (each, specify model and year) | 1 | |
| AC500-107 | OIL COOLER PLUGS (set of 2) | 1 | |
| ACS28010 | PLUG/BUNG-OIL COOLER VENT SCOOP | 4 | |
| ACS28013 | TOOL-OIL COOLER THERMAL VALVE REMOVAL | 6 | |
| ACS28013-IAS | OIL COOLER THERMAL VALVE REMOVAL TOOL Q400 | 1 | |
| AGE-00507-401 | COVER-AIR INTAKE COOLER | 1 | |
| AGE70477 | OIL COOLER CAP | 1 | |
| AH120-100 | ENGINE PLUGS (left & right engine deck, oil cooler plugs) (set of 3) | 1 | |
| AH130-105 | OIL COOLER INLET COVER | 1 | |
| AH350-130 | OIL COOLER INLET PLUG | 1 | |
| AL2792SHT1 | COVER, PRE COOLER | 1 | |
| AL2796STH1 | BLANK APU OIL COOLER | 1 | |
| APA-106 | ENGINE INLET PLUGS w/ oil cooler plug (set of 6) | 1 | |
| B100-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| B100-103 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| B18-115 | OIL COOLER CENTER SECTION INLET PLUGS (in wing leading edge) (set of 2) | 1 | |
| B18-118 | COCKPIT AIR INLET PLUGS (in leading edge, adjacent to oil cooler) (set of 2) | 1 | |
| B25-110 | OIL COOLER INLET PLUGS (set of 4) | 1 | |
| B300-101 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| B350-100 | ENGINE/OIL COOLER INLET PLUGS (OEM ship set item "B") (set of 4) | 1 | |
| B350-101 | ENGINE/OIL COOLER INLET PLUGS, winterized materials (set of 4) | 1 | |
| B36001 | PLATFORM -0 PRECOOLER, INSTALLATION & REMOVAL, | 1 | |
| B36001-1 | PLATFORM - PRECOOLER, INSTALLATION AND REMOVAL, RB211 ENGINE | 5 | |
| B36007 | RMVL/INSTL EQPT -0 PRECOOLER, RB211-535 ENGINES | 1 | |
| B36007-1 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER, RB211-535 ENGINES | 3 | |
| B36007-30 | PRECOOLER PAN | 1 | |
| B36008 | RMVL/INSTL EQPT -0 PRECOOLER, PW2000 ENGINE | 1 | |
| B36008-1 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER, PW2000 ENGINE | 1 | |
| B60-101 | ENGINE INLET PLUGS W/INTERCOOLER INLET PLUGS (set of 6) | 1 | |
| B90-100 | ENGINE INLET/OIL COOLER PLUGS (set of 4) | 1 | |
| B90-103 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| BRACH0415 | LEFT INNER COOLER | 1 | |
| BRACH0416 | RIGHT INNER COOLER | 1 | |
| BRACH0419 | INNERCOOLER GASKET | 1 | |
| BRACH0420 | INNER COOLER CONNECTOR | 1 | |
| BRACH0421 | INNER COOLER GASKET | 1 | |
| BT13-110 | OIL COOLER, EXHAUST, CARB AIR PLUGS (set of 4) | 1 | |
| C130-160 | OIL COOLER INLET PLUGS (set of 4) | 1 | |
| C130-161 | OIL COOLER INLET PLUGS (J, T, P & U models), NSN: 2840-01-499-1521 (set of 4) | 1 | |
| C130-162 | OIL COOLER INLET PLUGS, (H, J, P, T & U models), heavy duty type (set of 4) | 1 | |
| C130-163 | OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-530-6760 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| C270CP | Sesame Technologies C270CP Oil Cooler Plug, For Aircraft | 2 | |
| C27APU0CP | Sesame Technologies C27APU0CP Auxiliary Power Unit Oil Cooler Plug, For Aircraft | 2 | |
| C36002 | DISPATCH KIT PRECOOLER CONTROL VALVE | 1 | |
| C36002-1 | Dispatch Kit - Precooler Control Valve | 12 | |
| C36003 | Equipment - Removal/Installation. LEAP-1B Engine Precooler - Engine Off | 1 | |
| C36003-1 | PRECOOLER REMOVAL/INSTALLATION EQUIPMENT - CFM LEAP-1B ENGINE REMOVED (CE) | 3 | |
| C36003-23 | PRECOOLER REMOVAL/INSTALLATION EQUIPMENT - CFM LEAP-1B ENGINE REMOVED | 4 | |
| C36004 | Equipment - Removal/Installation. LEAP-1B Engine Precooler - Engine On | 1 | |
| C36004-1 | PRECOOLER REMOVAL AND INSTALLATION EQUIPMENT - ENGINE ON (CE) | 4 | |
| C36005-1 | SLING - PRECOOLER (CE) | 2 | |
| C36005-37 | SLING - PRECOOLER | 4 | |
| C36007-12 | Blanking Plates - Starter Air Duct & Precooler, CFM Engine Series | 6 | |
| C36008-2 | SPL-18640 - BLANKING PLATES - STARTER AIR DUCT & PRECOOLER, CFM ENGINE SERIES | 6 | |
| C510-100 | ENGINE INLET COVERS & EXHAUST PLUGS, w/ intercooler plugs (set of 6) | 1 | |
| C510-110 | ENGINE INLET PLUGS & EXHAUST PLUGS, w/ intercooler intake & exhaust and gen. plugs (set of 10) | 1 | |
| C510-115 | ENGINE INLET PLUGS, w/ intercooler intake & exhaust and gen. plugs (set of 8) | 1 | |
| C510-135 | INTERCOOLER PLUGS, on l.e. of pylon (set of 2) | 1 | |
| C510-150 | ENGINE COVERS, Hangar Use, Bikini type, w/ intercooler inlet plugs on l.e. of pylon (set of 4) | 1 | |
| C90A-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| C90A-102 | ENGINE/OIL COOLER INLET PLUGS, "pitot" style inlets (set of 4) | 1 | |
| C90A-103 | OIL COOLER INLET PLUGS (below nacelle) (set of 2) | 1 | |
| C90B-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| C90B-103 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| C90B-104 | ENGINE/OIL COOLER INLET PLUGS, "pitot" style inlets (set of 4) | 1 | |
| CH47-155 | AFT PYLON HYDRAULIC COOLER EXHAUST COVER | 1 | |
| CJ4-150 | ENGINE COVERS, Hangar Use, Bikini Type, includes intercooler plugs on pylon (set of 4) | 1 | |
| CJ4-155 | ENGINE COVERS, Hangar/Intermittant Outdoor Use, Entire Nacelle, includes intercooler plugs on pylon (set of 4) | 1 | |
| CS-318-48400 | Cover, Fan Cowl, Air cooler Outlet | 1 | |
| CT117943-1 | OIL COOLER GG AND ST | 1 | |
| CT118032-61 | OIL COOLER | 1 | |
| D1876-5000A | COOLER, AIR-NO.4 BRG COMP | 1 | |
| D5461018600300 | PRE-COOLER PANEL | 4 | |
| DC3-101 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| DEN-101 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| DEN-102 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| DEN-110 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| DEN-111 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| DR_SM-8915662 | LIFTING TOOL BHGE DR_SM-8915662 FOR FRAME SYNTHETIC OIL COOLER SIF0011494 SPECIAL TOOL FOR LIFTING OIL COLLER | 1 | |
| E120-100 | ENGINE PLUGS (left & right engine deck, oil cooler plugs) (set of 3) | 1 | |
| E130-105 | OIL COOLER INLET COVER | 1 | |
| ER6084G01 | OIL COOLER | 1 | |
| ER6230G01 | MAIN ENGINE AIR OIL COOLER | 1 | |
| F190-100 | OIL COOLER INTAKE PLUG | 1 | |
| F70045 | PLUG ASSY -0 OIL COOLER AND STARTER EXHT. USED | 1 | |
| F70078 | PLUG ASSY-OIL COOLER & FUEL AIR EXHAUST | 1 | |
| F70146-11 | Plug assembly-air cond intercooler ram air inlets | 4 | |
| F70146-12 | Plug assembly-air cond intercooler ram air inlets | 3 | |
| F7F-120 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| FSNOR3854101 | WATER COOLER 10 GALLON | 1 | |
| G36044-1 | Removal/Installation Equipment -Precooler (Ce) | 1 | |
| G36044-132 | TOOL R/I PRECOOLER | 1 | |
| G36044-204 | TOOL R/I PRECOOLER | 1 | |
| G36044-217 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER (CE) | 5 | |
| G36044-222 | TOOL R/I PRECOOLER | 1 | |
| G36044-272 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER | 3 | |
| G49006-12 | Oil Cooler Exhaust Cap Assy | 1 | |
| G601R381001-1 | Potable Water Apapter - Pre-Cooler | 4 | |
| G601R381001−1 | Potable Water Adapter − Pre− Cooler | 4 | |
| G700-101215-11 | Cover - Precooler Exhaust (Lh) | 2 | |
| G700-101215-12 | Cover - Precooler Exhaust (Rh) | 1 | |
| G71012-9 | ECS FWD PRECOOLER | 1 | |
| G71012-9-M | ECS FWD PRECOOLER | 1 | |
| GS2-102 | OIL COOLER INLET PLUGS (turbine powered) (set of 2) | 1 | |
| GS24009-19 | PRECOOLER OUTLET CAP | 1 | |
| GSE7200823 | IDG OIL-COOLER PROTECTIVE COVER | 1 | |
| HA-206-OCB-SB | STATIC BALANCE KIT OIL COOLER | 1 | |
| HA-51-000-TT0259 | COVER, OIL COOLER | 4 | |
| HA51-000TT0259 | COVER OIL COOLER | 4 | |
| HA51−000TT0259 | Cover − Oil Cooler | 4 | |
| HC1388-01 | COOLER: OIL, | 1 | |
| HC1388-03 | COOLER, | 1 | |
| HIX 3009-0G | PRECOOLER TOOL INSTALLATION | 2 | |
| HIX 3009−0G | PRECOOLER TOOL INSTALLATION | 2 | |
| HIX-3009-OG | PRECOOLER INSTALLATION TOOL | 2 | |
| HIX3009 | PRECOOLER TOOL INST | 7 | |
| HRR683-8 | OIL COOLER LINE DISCNCT TOOL | 1 | |
| HU20604 | GAGE, POSITION OF I.D.G. COOLER TO L.P. COMPRESSOR FAN CASE RB211 | 1 | |
| HU38864 | TRENT 800 COOLER COVER | 1 | |
| HU86525 | INSTALL REPLACEMENT PRE-COOLER DUCT, USED WITH HU87500 | 1 | |
| HU87500 | Precooler Duct frame | 3 | |
| HU87516 | REPLACEMENT COOLER DUCT | 1 | |
| HYD COOLER | HYD COOLER | 1 | |
| IAE1J13400 | WRENCH MECHANICAL ENGINE ASSY DRAIN PORT FUEL COOLED OIL COOLER | 15 | |
| IAE1R18928 | WRENCH, DUCT - AIR COOLED OIL COOLER INLET DUCT | 3 | |
| IAE5J13353 | #4 BEARING COOLER COVER(1EA) | 1 | |
| IAE5J13500 | LPT CASE COOLER DUCT COVER(1EA) | 2 | |
| IAE5R18922 | AIR OIL COOLER COVER(1EA) | 1 | |
| J36001 | PRECOOLER EQUIP-INSTL/REMV. | 1 | |
| J36001-102 | PRE-COOLER EQPT-REM/INST | 2 | |
| J36001-119 | PRECOOLER EQUIPMENT - REMOVAL/INSTALL, ROLLS ROYCE TRENT 800 (CE) | 5 | |
| J36001-68 | PRECOOLER STRAP | 1 | |
| J36002 | Tool Rem/Inst Precooler | 1 | |
| J36002-1 | R/I EQPT - PRECOOLER | 1 | |
| J36002-253 | PRE COOLER - R/I EQP | 1 | |
| J36002-263 | R/I EQPT - PRECOOLER | 1 | |
| J36002-338 | PRECOOLER REMOVAL/INSTALLATION EQUIPMENT PW ENGINES | 2 | |
| J36004-1 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER, PW ENGINES | 2 | |
| J36004-38 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER, PW ENGINES | 1 | |
| J36006-1 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER, GE90 ENGINE | 8 | |
| J36020-1 | REMOVAL/INSTALLATION EQUIPMENT - PRECOOLER, GE90 ENGINES | 8 | |
| J36021-1 | Precooler removal/installation equipment | 1 | |
| J36022-1 | Precooler sling-GE9X | 1 | |
| J36026-2 | BLANKING PLATES - STARTER AIR DUCT & PRECOOLER, GE90-100 SERIES | 4 | |
| J36026-4 | BLANKING PLATE-STARTER AIR DUCT & PRECOOLER, RR ENGINE 800 ENGINE SERIES | 1 | |
| J36027 | PRECOOLER CLEANING TOOL | 1 | |
| J36027-1 | CLEANING TOOL - PRECOOLER | 2 | |
| J38002 | PRE COOLER EQUIP | 1 | |
| K-5036 | ADAPTER, PRECOOLER | 2 | |
| KC135-210 | PRE-COOLER EXHAUST PLUG, loc. above turbine exhaust outlet | 1 | |
| L19-106 | OIL COOLER INLET PLUG | 1 | |
| LDT830 | FORD OIL COOLER LINE DISC | 1 | |
| LDTM3812 | TRANS OIL COOLER LINE 3/8X1/2 | 1 | |
| LEV-105 | BLEED AIR INTERCOOLER PLUGS (right side) (set of 2) | 1 | |
| LMC-100355 | PRECOOLER SLING | 1 | |
| LP3-110 | OIL COOLER INLET PLUGS, NSN 1730-01-554-0659 "COVER,AIRCRAFT GROUND SERVICING", NATO STOCK NUMBER: 1730-20-A0Y-8488 (set of 4) | 1 | |
| LP3-111 | OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-525-0002 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| M65727003 | DEVICE, INSTL/RMV -PRECOOLER | 1 | |
| M65727367 | DEVICE, INSTL/RMV - PRECOOLER | 1 | |
| MER-106 | OIL COOLER PLUGS (set of 2) | 1 | |
| MIT65B90101 | BLANKING PLATE - LEAKAGE TEST, ENGINE PRECOOLER | 1 | |
| P31C-132 | INTERCOOLER INLET PLUGS (set of 2) | 1 | |
| P601-101 | ENGINE INLET & OIL COOLER PLUGS (set of 6) | 1 | |
| P601-102 | INTERCOOLER INLET PLUGS (set of 2) | 1 | |
| P601-120 | ENGINE AIR INLET & OIL COOLER PLUGS (SUPERSTAR MODEL) (set of 6) | 1 | |
| P601-150 | ENGINE COVERS (no intercooler) (set of 2) | 1 | |
| P601-155 | INSULATED ENGINE COVERS (no intercooler) (set of 2) | 1 | |
| P601-160 | ENGINE COVERS (w/intercooler) (set of 2) | 1 | |
| P601-165 | INSULATED ENGINE COVERS (w/intercooler) (set of 2) | 1 | |
| P601-210 | WING/ENGINE NACELLE COVERS (longer wing, no intercooler), WINTER USE (set of 2) | 1 | |
| P601-215 | WING/ENGINE NACELLE COVERS (longer wing, no intercooler), ALL YEAR USE (set of 2) | 1 | |
| P601-240 | WING/ENGINE NACELLE COVERS (longer wing, w/intercooler), WINTER USE (set of 2) | 1 | |
| P601-245 | WING/ENGINE NACELLE COVERS (longer wing, w/intercooler), ALL YEAR USE (set of 2) | 1 | |
| P601-250 | WING/INSULATED ENGINE NACELLE COVERS (longer wing, w/intercooler), WINTER USE (set of 2) | 1 | |
| P60434 | COVER SHIPPING - A/O COOLER DUCT INLET | 1 | |
| P60500 | COVER, SHIPPING - A/O COOLER DUCT, INLET | 1 | |
| P60501 | COVER, SHIPPING - A/O COOLER DUCT, OUTLET | 1 | |
| PA28-105 | CARB. AIR or OIL COOLER INLET PLUG (each, specify model and year) | 1 | |
| PA31-107 | INTERCOOLER INLET PLUGS (set of 2) | 1 | |
| PC12-101 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| PC12-102 | SMALL PLUGS SET (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| PC12-110 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet & Engine Mount NACA scoops) (set of 9) | 1 | |
| PC12-111 | SMALL PLUGS SET, 47E Next Gen Models (2 Oil Cooler Plugs, Gen. Blast Tube, ECM inlet) (set of 4) | 1 | |
| PC21-110 | SMALL PLUGS SET (Oil Cooler, Gen Air, ACS RAM inlets) (set of 3) | 1 | |
| PC7-130 | OIL COOLER INTAKE PLUG, (similar to mfg p/n 9014-2013) | 1 | |
| PFS777-1 | Adapter - Precooler Maintenance | 1 | |
| PWA102285 | ADAPTER - TORQUE, IDG AIR/OIL COOLER SUPPORT BRACKET | 1 | |
| PWA85853 | ADAPTER,TORQUE-ENGINE ASSY AIR OIL COOLER | 1 | |
| PWA87198 | ADAPTER,TORQUE-AIR/OIL COOLER, MOUNT BOLTS | 4 | |
| PWA87506 | COVER-AIR/OIL COOLER | 1 | |
| PWA88254 | SIMULATOR-FUEL/OIL COOLER BYPASS VALVE | 1 | |
| PWC37081 | PULLER - NO 2 BEARING / OIL COOLER | 4 | |
| PWC38147 | REMOVAL TOOL - OIL COOLER THERMAL VALVE | 14 | |
| RB GT1-90007441000 | Oil Cooler Drive Shaft Nut Torque Socket | 1 | |
| RB T101549 | Transmission Oil Cooler Holding Fixture | 1 | |
| RB T101550 | Transmission Oil Cooler Disassembly Tool | 1 | |
| RB T101551 | Transmission Oil Cooler Bypass Valve Plug Puller | 1 | |
| RB T101552 | Transmission Oil Cooler Bypass Valve Retaining Ring Gauge | 1 | |
| RB T101553 | Transmission Oil Cooler Sleeve Install Tool Set | 1 | |
| RBEL133M-7901-101 | Puller Oil Cooler System | 1 | |
| RBT18533 | Knife Edge Balancer for Oil Cooler Blower | 2 | |
| RBT18548 | Oil Cooler Blower Static Balance System | 1 | |
| RBT18651-101 | Cooler Inlet Dust Plug | 1 | |
| RRT028228 | 787 FANCASECOOLER LOCATING PINS TOOL | 2 | |
| RRT042328 | VFG SFCE COOLER R/I TOOLING | 1 | |
| RRT042328-2 | SURFACE COOLER HANDLING AID | 3 | |
| RRT050495 | OIL SFCE COOLER GUIDE PINS | 1 | |
| RRT054315 | VFG SFCE COOLER PROTECTION | 1 | |
| RRT070948 | PROTECT TRUSTLINK DURING PRECOOLER RI | 4 | |
| RSE1120 | ALIGNMNET TOOL PRECOOLER DUCT (SHOP & LINE USE) | 3 | |
| RSE1120 REV E | ALIGNMENT TOOL PRECOOLER DUCT (SHOP & LINE USE) | 1 | |
| RSE1131 | TOOL ALIGN PRECOOLER | 1 | |
| RSE1184 | LOCATING FIXTURE PRECOOLER DUCT, REWORK L/H T/R | 1 | |
| RSE1184 REV NC | LOCATING FIXTURE PRECOOLER DUCT, REWORK LlH TlR | 1 | |
| RSE1187 | SCRIBE & DRILL TOOLSPRAY COOLER DBL. R/H | 1 | |
| RSE1187 REV NC | SCRIBE & DRILL TOOLSPRAY COOLER DBL. RlH | 1 | |
| S340-110 | ENGINE INLET PLUGS & OIL COOLER PLUGS (set of 6) | 1 | |
| SM14-110 | OIL COOLER PLUGS (set of 2) | 1 | |
| SNP1585 | Magnetic Can Cooler 10-Pack | 1 | |
| SPL-13475 | PROTECTIVE COVER - SURFACE COOLER | 1 | |
| SPL-14647 | REMOVAL AND INSTALLATION EQUIP. - PRECOOLER, LEAP- | 1 | |
| SPL-14791 | SLING - PRECOOLER | 1 | |
| SPL-16637 | REMOVAL AND INSTALLATION EQUIP. - PRECOOLER, LEAP- | 1 | |
| SVTSRAD-FCA | COOLER SYSTEM REFILLER FCA | 1 | |
| T101134 | PRECOOLER | 1 | |
| T101551 | TRANSMISSION OIL COOLER BYPASS VALVE PLUG PULLER | 1 | |
| T28-110 | OIL COOLER INLET PLUG | 1 | |
| THR-102 | OIL COOLER PLUG | 1 | |
| TRA-115 | INTAKE PLUG WITH OIL COOLER SCOOP PLUG, connected w/ lanyard (402) (set of 2) | 1 | |
| TRA-116 | INTAKE PLUG with OIL COOLER SCOOP PLUG, connected w/ lanyard (set of 2) | 1 | |
| TRA-117 | INTAKE PLUG with OIL COOLER SCOOP PLUGS, connected w/ lanyard (set of 3) | 1 | |
| U21-100 | ENGINE/OIL COOLER INLET PLUGS (set of 4) | 1 | |
| U21-103 | OIL COOLER INLET PLUGS (set of 2) | 1 | |
| Upgrade of C36005-1 to C36005-37 | Sling-precooler | 1 | |
| WB011017-01 | COVER HOUSING OIL COOLER | 1 | |
| WLD23SP101F | COOLER BIG MOUTH 3PK FLASH | 1 | |
| X56122267 | PULLER-OIL COOLER LOCK TAB REMOVAL | 1 | |
| XBA23MA154 | COOLER BUNDLE | 1 | |
| XBA23SC142 | BACKPACK COOLER CHAIR 10PK | 1 | |
| XBA23SC143 | COOLER SPEAKER 5PK | 1 | |
| XBA23SC144 | COOLER 24CAN 5PK | 1 | |
| XBA23SW111 | BIG FRIDGE COOLER 20Q POWERCRD | 1 | |
| XBA24NW161 | ROLLIING CAB COOLER METAL QTY2 | 1 | |
| XBA24NW164 | OUTDOOR 3PC COOLER KIT 5 SET | 1 | |
| XBA24SW187 | ROLLING CAB COOLER METAL QTY2 | 1 | |
| Y11-105 | OIL COOLER INLET PLUG | 1 | |
| Y3-120 | OIL COOLER INLET PLUGS (in wing root) (set of 2) | 1 | |
| Y52-105 | OIL COOLER INLET PLUG (under right wing) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
