| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1151952-14 | CONTROL | 1 | |
| 139010 | CONTROL | 2 | |
| 2041223-0417 | CONTROL | 5 | |
| 21C7815P01 | CONTROL | 1 | |
| 21C7815P02 | CONTROL | 1 | |
| 5805747-001 | CONTROL | 1 | |
| 5954644-1 | Control | 4 | |
| 5954644-501 | Control | 1 | |
| 97F32001001000 | CONTROL | 5 | |
| 98A27608011000 | CONTROL | 1 | |
| 98A27608011001 | CONTROL | 1 | |
| 98A34103000000 | CONTROL | 3 | |
| 98A54003109000 | CONTROL | 1 | |
| AC71-60 | CONTROL | 1 | |
| C21003-4 | CONTROL | 1 | |
| C21003-54 | CONTROL | 1 | |
| CJ105A8 | CONTROL | 1 | |
| CJ105A9 | CONTROL | 1 | |
| F70330-19 | CONTROL | 3 | |
| GS20454-1 | CONTROL | 7 | |
| MC71-37 | CONTROL | 1 | |
| MC71-60 | CONTROL | 1 | |
| PWA25672 | Control | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0UT212 | TOOL, LANDING GEAR CONTROL HANDLE INSTL | 2 | |
| PWC30506 | TEST SET, FUEL CONTROL | 6 | |
| F70320-1 | Holding Fixture - Control Column | 10 | |
| F80206-1 | Breakout Box - Cabin Control Pressure | 5 | |
| "^2^G76002-19" | PROTRACTOR ASSEMBLY - CONTROL COLUMN | 1 | |
| (CALIB) 15.160.888.080 | VALISE CONTROLE CLIMATISATION | 1 | |
| (CALIB) 20431MI | STEADY CONTROL TIGRE / T181G4001.121 | 1 | |
| (CALIB) 20431MI-2 | CONTROL PANEL | 1 | |
| (CALIB) 20441MI-100 | STEADY CONTROL (ELECTRONIQUE) | 1 | |
| (CALIB) 20514MI-2 | CONTROL PANEL STEADY MONITORING HYBRIDE | 1 | |
| (CALIB) 20549A | CONTROLEUR DE BOUCLES | 1 | |
| (CALIB) 20549S | LOOP CONTROLLER GSE | 1 | |
| (CALIB) 20549SI | LOOP CONTROLLER GSE | 2 | |
| (CALIB) 20549SIC | LOOP CONTROLLER GSE | 1 | |
| (CALIB) 20549SIC-1 | LOOP CONTROLLER GSE | 1 | |
| (CALIB) 20606MI2 | POWER SWITCHING CONTROL UNIT VERSION HAD | 1 | |
| (CALIB) 20639A0-22 | CONTROLADOR DE ACTUATORES A400M | 1 | |
| (CALIB) 20939A-2 | SERVO CONTROL SLAVING TOOL A330 A340 NG / 97F27901003000 | 1 | |
| (CALIB) 21620A1-001 | VALISE DE CONTROLE | 1 | |
| (CALIB) 21622A1-100 | CONTROLEUR DE BOUCLE INTERFACE OHDS A320/A330NEO | 1 | |
| (CALIB) 21622A1-200 | FAISCEAU INTERFACE MAT/CONTROLEUR A320NEO #1 | 1 | |
| (CALIB) 21931A1-038 | MCM MCU MAIN CONTROL UNIT | 1 | |
| (CALIB) 3266-7013 | Loop Controller GSE clavier | 1 | |
| (CALIB) 3266-8002 | LOOP CONTROLLER GSE CARTE MESURE & TRAITEMENT / 20549SI-12 | 1 | |
| (CALIB) 365A97-6180-00 | VALISE CONTROLE VERINS | 1 | |
| (CALIB) 4MIT65B80307-1 | PROTRACTOR ASSEMBLY, CONTROL COLUMN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6798233M | TEST SET,ELECTRONIC TEMPERATURE DATUM CONTROL (CALIBRATION) | 1 | |
| (CALIB) 682003008 | CONTROL CONTROL UNIT-RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 701-M | 3MTM TEST KIT FOR STATIC CONTROL SURFACES 701 | 1 | |
| (CALIB) 703A94-3200-01 | STEADY CONTROL (CALIBRATION) | 1 | |
| (CALIB) 915-18205 | AIRCRAFT VIBRATION ANALYSIS AND CONTROL EQUIPMENT, CHADWICK VXP (CALIBRATION) | 1 | |
| (CALIB) 9240SI | CONTRLLR CONTROLLER-LOOP (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 95-92118-0001 | TEST BOX, FLAP CONTROL (CALIBRATION) | 1 | |
| (CALIB) 95-92160-0001 | MEDIDOR DE ESFUERZO CONTROL RUEDA | 1 | |
| (CALIB) 97F32001001000 | CONTROL CONTROL UNIT-LEG FREE FALL ACTU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A34103000000 | CONTROL CONTROL-TOOL FUSELAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27403500000 | PITCH TRIM CONTROL LOCKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34103001000 | CONTROL CONTROL TOOL-STATPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52003001000 | UNIT CONTROL UNIT,O C-AIRSTAIRS DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F34103002000 | CONTROL,TOOL-FUSELAGE CONTOUR STATPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003025000 | Cantilever Exchange and Control Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27208513000 | SUPPORT SUPPORT - SERVO CONTROL, RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309008000 | SUPPORT ADAPTER KIT-EHA OR SERVOCONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27801001000 | LOCKNGTL LOCKING TOOL-FLAP SLAT CONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S27003010000 | GUARD SAFETY FLAP CONTROL | 1 | |
| (CALIB) 98S27005003000 | WING FLAP CONTROL BOX-9450A1 | 1 | |
| (CALIB) 98S27005003000-CAL | CALIBRATION - FLAP CONTROL BOX (CALIBRATION) | 1 | |
| (CALIB) 98S27008001001-REVD0 | FLIGHT CONTROL ENGINE PINS SET (CALIBRATION) | 1 | |
| (CALIB) 98S61005000000 | PROPELLER CONTROL UNIT SETTING TOOL | 1 | |
| (CALIB) 98V27208789000 | SUPPORT SERVO CONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D28108418000 | BOX ACT VALVE CONTROL BOX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A38FCBGSE | FUEL SUPPLY CONTROL BOX TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AE89415Z | FLOWCNTR FLOW CONTROL TEST - RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) APC 401 | Power Controller (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27006-48 | Test Equip. - Cutout Switch Stabilizer Trim Control (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27006-95 | Test Equip. - Cutout Switch Stabilizer Trim Control (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27007-31 | TEST BOX - CUTOUT SWITCH, STABILIZER TRIM CONTROL (LINE MAINTENANCE) (CALIBRATION) | 1 | |
| (CALIB) C27060-1 | ADAPTER EQUIPMENT - CONTROL WHEEL (CALIBRATION) | 1 | |
| (CALIB) C29002-17 | TEST BOX-RUDDER POWER CONTROL UNIT (CALIBRATION) | 1 | |
| (CALIB) C36006-1 | Test Equipment - Air Supply Control System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9321201-0007 | LG CONTROL PANEL ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F71292-A | CONTROL SURFACE (CALIBRATION) | 1 | |
| (CALIB) FTR-7060-5 | FUEL CONTROL TEST STAND (CALIBRATION) | 1 | |
| (CALIB) GM1DS34CK010-2 | TEMPERATURE CONTROLLER KIT (CALIBRATION) | 1 | |
| (CALIB) GMIDS34CK010-2 | NDT CONTROLLER, HEATING BLANKETS - (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HFK02 | Flow Control test kit and checkout unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 154 | Flight Control System Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MLS-800 | MICROPROCESSOR CONTROLLED GROUND STATION SIMULATOR (CALIBRATION) | 1 | |
| (CALIB) MODEL: AB3000 | BATTERY CHARGER CONTROLLER (CALIBRATION) | 1 | |
| (CALIB) PWA29451 | ADAPTER HYDRAULIC PUMP ENGINE VANE CONTROL (EVC) (CALIBRATION) | 1 | |
| (CALIB) PWC38264 | TEMPLATE FUEL CONTROL | 1 | |
| (CALIB) RIN27608397000 | CONTROL CONTROL BOX-SPOILER,VALVE GROUP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S622V4007102 | STEADY CONTROL NH90 | 1 | |
| (CALIB) SG155-001 | Central control unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1200A | Control Display Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1200B | Control Display Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1205 | Control head DFIU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T181G4001.121 | STEADY CONTROL TIGRE | 1 | |
| (CALIB) TM0104G012 | ENGINE VIBRATION CONTROL (CALIBRATION) | 1 | |
| (CALIB) TM2300G001 | CONTROL AND MONITORING HARNESS CONDITIONING (CALIBRATION) | 1 | |
| (CALIB) TR31-101 | PROTRCTR PROTRACTOR - CONTROL SURFACE (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) TR60-1 | RIGMASTE RIGMASTER SYSTEM-FLIGHT CONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA220 | Flight Control Computer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA420 | Flight Control Computer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA440 | Autopilot Controller (CALIBRATION) (CALIBRATION) | 1 | |
| 0 PWA25672 | TEMPERATURE CONTROL UNIT ASSY | 1 | |
| 0-100P/AI/A | BANCO DE CONTROL DEPÓSITO HIDRÁULICO | 1 | |
| 00-5013-05 | SCU-SYSTEM CONTROL UNIT | 1 | |
| 001-444-00692-0 | CONTROL BOX | 1 | |
| 0061R55097 | AOA HEATER CONTROL BOX | 1 | |
| 0061S44264 | MONITOR/CONTROL PROGRAM | 1 | |
| 0064455C-UD | UNITED ELECTRIC CONTROLS CIRCULAR CHARTS | 1 | |
| 00928-006-000 | DRIVING CONTROL UNIT | 1 | |
| 01-1000-61 | TEST SET CONTROL SYSTEM | 1 | |
| 01-1200-65 | CONTROL DISPLAY UNIT | 1 | |
| 01-1200-70 | CONTROL DISPLAY UNIT | 1 | |
| 0101KCQ-20 | EPR CONTROL CABLE | 1 | |
| 0101KCQ20 | EPR CONTROL CABLE | 1 | |
| 01500-202 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE | 1 | |
| 017G001 | CONTRAST CONTROL | 1 | |
| 0339-90 | Langa 0339-90 Tripod Jack Control Console, Electrohydraulic Power Pack | 2 | |
| 0339-91 | Langa 0339-91 Tri-pod Jack Control Console, Electric | 2 | |
| 0339-92 | Langa 0339-92 Tri-pod Jack Control Console, Pneumatic | 2 | |
| 0339-95 | Langa 0339-95 Semiautomatic Control System w/Electronic Inclinometer | 2 | |
| 0339-98 | Langa 0339-98 Fully Automatic control system w/Wifi Inclinometer | 2 | |
| 0339-99 | Langa 0339-99 Fully Automatic control system w/Lineal Transducers | 2 | |
| 04016G-10 | C35-26 - MIC CONTROL | 3 | |
| 04016G-14 | MIC CONTROL & CORD ASSY C35-08 | 2 | |
| 046-55-999-0131 | SENNHEISER HME 46-K AIR TRAFFIC CONTROL HEADSET | 1 | |
| 05-3005-1100 | HYDRAULIC TEST RIG-CONTROLECABLE OUTPUT 0-282KG | 1 | |
| 0510HU | Goodrich Sensor System Interface Control Unit (ICU) | 1 | |
| 0510HU | GOODRICH SYSTEMS INTERFACE CONTROL UNIT | 1 | |
| 06-5022-6C00 | UNIT, RUDDER PEDAL / CONTROL COLUMN DAMPERS SERVICING | 9 | |
| 062-1200-00 | DISPLAY-CONTROL UNIT | 1 | |
| 066-01069-0000 | Dme Control Unit Kdi-572 / Honeywell | 1 | |
| 06‐5022‐6C00 | Unit,Rudder Pedal/Control Dampers Servicing | 9 | |
| 071-01546-0101 | Kfs 559aa Uhf Control/ Freq Select Honeywell | 1 | |
| 071-01596-0201 | PRIMARY FLIGHT DISPLAY CONTROLLER | 1 | |
| 0733 | CONTROL CABLE AC71-48 L 1220 | 1 | |
| 08HME65B81843-1 | INSTALLATION REMOVAL SLING RIGHT CONTROL UNITS AILERON | 1 | |
| 09-138 | SPEED CONTROLLER | 1 | |
| 0S22848E | FLOW CONTROLER TEST | 1 | |
| 0S51166-0000 | HYDRAULIC CONTROL RIG | 1 | |
| 0U 145392 | Control Fixture | 1 | |
| 0U 145404 | CONTROL FIXTURE | 1 | |
| 0U 145426 | VALVE BLOCK CONTROL LEVER | 1 | |
| 0U135956 | CONTROL UNIT | 1 | |
| 0U144765 | WRENCH - AILERON SERVOCONTROL ADJUSTMENT | 13 | |
| 0U144768 | HOLDING WRENCH - AILERON SERVOCONTROL ADJUSTMENT | 11 | |
| 0U145392 | FIXTURE-CONTROL | 1 | |
| 0U145404 | CONTROL FIXTURE | 1 | |
| 0U145409 | SOCKET WRENCH FLIGHT CONTROL | 18 | |
| 0U145914 | DRAINING TOOL - ELEVATOR SERVOCONTROL | 20 | |
| 0U146955 | PIN - RIGGING, THSA SPOOL CONTROL | 1 | |
| 0U147264 | SERVO CONTROL HANDLING FIXTURE | 1 | |
| 0U147629 | CONTROL OF FIXTURE | 1 | |
| 0U190358 | PIN-RIGGING, ELEVATOR CONTROL | 4 | |
| 0U190439 | ELECTRICAL CONTROL BOX | 1 | |
| 0U190664 | SPECIAL CONTROL LEVER | 1 | |
| 0U190825 | HYDRAULIC CONTROL BLOCK | 1 | |
| 0U190838 | DEVICE-MANUAL INPUT CONTROL | 1 | |
| 0U190846 | HYD CONTROL BLOCK TEST TOOL | 1 | |
| 0U190857 | CONTROL VALVE SHAFTS LOCKING TOOL | 28 | |
| 0U190864 | TOOL-RIGGING,SPOOL CONTROL OUTPUT,THS ACTUATOR | 9 | |
| 0U190903 | ELECTRONIC CONTROL RACK | 1 | |
| 0U190981-100 | CONTROL BOX | 1 | |
| 0U191050 | CONTROL BOX | 1 | |
| 0U191068 | PIN - RIGGING, SPOOL CONTROL | 9 | |
| 0U191685 | ATEME TEST CONTROL RACK | 1 | |
| 0U191868 | CONTROL SCREW BAR | 1 | |
| 0U300765 | WRENCH, BRAKE CONTROL | 7 | |
| 0U300960 | CLEARANCE CONTROL TOOL | 1 | |
| 0U300961 | CLEARANCE CONTROL TOOL | 1 | |
| 0U300961-02N1 | CLEARANCE CONTROL TOOL | 1 | |
| 0U300962 | ROTATIONNEL CONTROL | 1 | |
| 0U300963 | RADIAL BACKLASH CONTROL TOOL | 1 | |
| 0U301170 | RING POSITION CONTROL | 1 | |
| 0U301211 | CLEARANCE CONTROL TOOL | 1 | |
| 0UT212 | LANDING GEAR CONTROL HANDLE INSTL TOOL | 2 | |
| 1-040-0343 | CONTROL PANEL TO COOLER CABLE, 8 PIN CONNECTOR 50F | 1 | |
| 1/6 HP SRMH | MOTOR WITH BUILT-IN SPEED CONTROL (ROTO PEEN) | 1 | |
| 10-05102 | FLIGHT TIME CONTROL 2-1/4" TAS FROM PILOT FLISYS57P | 1 | |
| 10-345601-001 | STEERING CONTROL HYDRAULIC MODULE | 1 | |
| 10-345601-002 | STEERING CONTROL HYDRAULIC MODULE | 1 | |
| 10-60581-3 | ASSEMBLY - LOCK, FLIGHT CONTROLS (USED ON VALVE P/N 10-60581-2 AND | 1 | |
| 10-61355-3 | SWITCH REFUEL POWER CONTROL | 1 | |
| 100-0460-101 | REMOTE CONTROL - ATLANTIS | 1 | |
| 101-01185A | REMOTE CONTROL | 6 | |
| 101-01195B | Hand-Held Remote Control for DPS-500 and ADTS-405F | 2 | |
| 101-524009-69 | TUBE, FLIGHT CONTROL ASSY. | 1 | |
| 101-590016-0015 | CONTROL LOCKS (BY-207, BY-239, BY-250 AND AFTER; BZ-1 AND AFTER; FL954, FL-1010, FL-1031 AND AFTER; FM-66 AND AFTER) (BEECHCRAFT CORP) | 1 | |
| 101-590016-7 | LOCK ASSEMBLY-GUST CONTROL SURFACE | 2 | |
| 101-590016-9 | FLIGHT CONTROL (GUST) LOCK P/N: | 1 | |
| 1014600-2 | ACTIVE CLEARANCE CONTROL VALVE | 1 | |
| 102-03120 | FLIGHT CONTROL CABLE TENSION | 7 | |
| 1023348-2-106 | CONTROL - PROGNOSTICS HEALTH AND MANAGEMENT | 1 | |
| 1023348-5-106 | CONTROL - PROGNOSTICS HEALTH AND MANAGEMENT | 1 | |
| 1024-4 | DIMMER CONTROL UNIT | 1 | |
| 1024979-1 | WIRING HARNESS-ELECTRONIC ENGINE CONTROL | 1 | |
| 1033-1 | EQUIPMENT COOLING CONTROLLER | 3 | |
| 104687-002 | CONTROL WHEEL RETAINER CLIP | 1 | |
| 105-003-2 | BUS POWER CONTROL UNIT | 1 | |
| 105-13101W3 | DISASSEMBLY/ASSEMBLY – ROTATING CONTROL ROD | 1 | |
| 106884-3-1 | AIR FLOW CONTROL (one unit refer to line 69-70) | 1 | |
| 106CZ02L06Y13 | RCCB REMOTE CONTROL CIRCUIT | 1 | |
| 1072-500 | CONTROL VALVE | 1 | |
| 1072-800 | THREE WAY CONTROL VALVE | 2 | |
| 1072-800B | CONTROL VALVE | 2 | |
| 1072-801 | AIRBUS THREE WAY CONTROL VALVE | 2 | |
| 107CZ02L06Y12 | RCCB REMOTE CONTROL CIRCUIT | 1 | |
| 10855B01C00 | CONTROLLER | 1 | |
| 109-0130-05-117 | LINK ASSEMBLY, PITCH CONTROL | 1 | |
| 109-0135-13-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 1 | |
| 109-3000-03-1 | PIN SET, FLIGHT CONTROLS ADJUSTMENT | 1 | |
| 109-3000-03-101 | FLIGHT CONTROL ADJUSTMENT | 2 | |
| 109-3000-03-143 | PIN SET, FLIGHT CONTROLS | 1 | |
| 109-3010-01-47 | TOOL FLIGHT CONTROL | 1 | |
| 109-3101-75-101 | KEY,SERVOCONTROL | 2 | |
| 109-3101-75-101 | WRENCH, FLIGHT CONTROLS SERVOACTUATOR JOINT REMOVAL/INSTALLATION GF-79-00 | 2 | |
| 109-3101-84-101 | TOOL CONTROLING | 1 | |
| 109-3130-75-101 | WRENCH, FLIGHT CONTROLS SERVO-ACTUATOR JOINT REMOVAL / INSTALLATION | 1 | |
| 109-3130-82-101 | TOOL SET, TAIL ROTOR CONTROL ROD BUSHING REMOVAL/INSTALLATION/BREAKOUT CHECK. | 1 | |
| 109-3130-85-133 | TOOL KIT, TAIL ROTOR PITCH CONTROL SHAFT BEARING R | 1 | |
| 109-3131-03-101 | TOOL,TAIL ROTOR PITCH CONTROL SYST | 1 | |
| 109-3400-06-01 | FLIGHT CONTROL SERVO-ACTUATOR LENGTH ADJUSTMENT | 1 | |
| 109-3400-06-1 | TOOL,CONTROLLING | 1 | |
| 109-3600-37-101 | TOOL SET, ENGINE CONTROL RIGGING PINS AND LVDT/RVDT TEST BOX. | 1 | |
| 109-3600-37-127 | TOOL SET, ENGINE CONTROL RIGGING PINS AND LVDT/RVDT TEST BOX | 1 | |
| 109-3600-37-209 | PIN ASSY, CONTROL | 1 | |
| 109-3900-79-1 | FLIGHT CONTROL ADJUSTMENT | 1 | |
| 109-3900-79-107 | TOOL KIT, FLIGHT CONTROL ADJUSTMENT | 1 | |
| 10GF032-01 | THALES DC P/S CONTROL CABLE | 1 | |
| 11-118708 | REMOTE CONTROL, 16"CRT'S VH-BZF | 1 | |
| 110-0440-101 | HARNESS CONTROL TOOL | 4 | |
| 110-0460-103 | CONTROLLER - HAND HELD (MODEL HHC-552. REQUIRED WHEN PURCHASING AN ADC-552 DIGITAL CONVERTER) (ATLANTIS AEROSPACE CORP.) | 2 | |
| 1100-1 | MCU # MASTER CONTROL UNIT | 12 | |
| 1100-2 | MCU CONTROL UNIT | 3 | |
| 110602003-00 | ELECTRONIC ENGINE CONTROL (EEC) SOFTWARE LOADING CABLE | 7 | |
| 110602003-01 | ELECTRONIC ENGINE CONTROL (EEC) SOFTWARE LOADING CABLE | 1 | |
| 1120-01-055 | NTERCOM - INTRINSICALLY SAFE COMMUNICATION SYSTEM (CONTROL TOOL) | 1 | |
| 1125-21-30-00 | Cabin pressure control sest set | 1 | |
| 1125-2130-00 | Astra Cabin Pressure Control Tester | 1 | |
| 114-380069-0001 | RIG PIN SET-FLIGHT CONTROL | 1 | |
| 114-380069-0003 | FLIGHT CONTROL RIG PIN (ELEVATOR, AILERON, AFT RUDDER) | 1 | |
| 114-380069-0005 | FLIGHT CONTROL RIG PIN (FWD RUDDER BELLCRANK) | 1 | |
| 114-380069-0007 | FLIGHT CONTROL RIG PIN (RUDDER PEDALS) | 1 | |
| 114-380069-001 | FLIGHT CONTROL RIG PIN SET | 1 | |
| 1151336-1 | CONTROLLER-ANTI ICE | 1 | |
| 1151952-19 | CONTROL-STANDBY POWER | 1 | |
| 115370-1118 | FCDC-FLIGHT CONTROL DATA CONCENTRATOR | 1 | |
| 1159GSE40103-1 | RIG PIN KIT - FLIGHT CONTROL SYSTEMS | 2 | |
| 1159GSE40103‐1 | RIG PIN KIT ‐ FLIGHT CONTROL SYSTEMS | 2 | |
| 1159GSE40105-1 | ENGINE CONTROL RIG PIN KIT | 1 | |
| 1159GSE50103-1 | Gulfstream Flight Control Rig Pin Kit | 3 | |
| 1159GSE50239-9 | CONTROL COLUMN RECONNECT TOOL (AIRCRAFT 5001 THRU AIRCRAFT 5389 NOT HAVING ASC 99A) | 1 | |
| 1159GSE50502-201 | FLAP CONTROL TEST SET | 2 | |
| 1159GSE50503-201 | GENERATOR CONTROL UNIT BREAKOUT BOX | 1 | |
| 1159GSE50504-201 | BUS POWER CONTROL UNIT BREAKOUT BOX | 1 | |
| 1159GSE50505-201 | ANTI-SKID CONTROL TEST BOX | 1 | |
| 1159GSE50515-201 | NOSE WHEEL STEERING CONTROL BREAKOUT BOX | 1 | |
| 1159GSE50516-201 | CABIN PRESSURIZATION CONTROL BREAKOUT BOX | 1 | |
| 1159GSE50710-1 | FLAP / STAB CONTROLLER CABLE / OVERLAY BREAKOUT KIT | 1 | |
| 1159SCAV463-3 | ATC CONTROLLER | 1 | |
| 1159SEM20095-15 | NOSE GEAR MANUAL CONTROL VALVE LOCK ASSEMBLY | 3 | |
| 1159SEM20095-23 | MAIN GEAR MANUAL CONTROL VALVE PIN SAFETY LOCK ASSEMBLY | 3 | |
| 1159SEM20095-9 | MAIN GEAR MANUAL CONTROL VALVE PIN SAFETY LOCK ASSEMBLY | 2 | |
| 11743001 W3 | TAIL ROTOR CONTROL FIXTURE | 1 | |
| 11900-13 | CONTROL UNIT | 1 | |
| 11C3462G01 | GUIDE PIN SET, INSTALL - CONTROL ALTERNATOR | 3 | |
| 11G001-C052200-801 | KIT FLIGHT CONTROL RIGGING PINS | 1 | |
| 12-02651 | CONTROL SURFACE ANGEL METER | 2 | |
| 12-05317 | PRESSURE CONTROLLER 0/40 BAR | 1 | |
| 120-056 | AIR CONTROL VALVE | 1 | |
| 120A-7710 | CONTROL LOCK RUDDER | 1 | |
| 120A-7720 | CONTROL LOCK AILERON | 1 | |
| 120A-7724 | CONTROL LOCK ELEVATOR | 1 | |
| 120TP-2700-02 | Control Deflection Gauge | 1 | |
| 121R242820-101 | TAIL ROTOR PITCH CONTROL ASSY | 1 | |
| 121R242820-103 | TAIL ROTOR PITCH CONTROL ASSY | 1 | |
| 12245-060-001 | CONTROL CABLE RIGGING TOOL | 2 | |
| 123017-001 | RF80-K RECOVERY CONTROL BOARD | 1 | |
| 1244-006265 | RAYCHEN HEAT CONTROL | 1 | |
| 129666-3 | SENSOR-PRECOOLER CONTROL VALVE | 1 | |
| 12S1206-02 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) | 1 | |
| 12S1207-02 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) | 1 | |
| 12S1273-03 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Vacuum Ready - 12,0 | 1 | |
| 12S1274-03 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Vacuum Ready - 12,0 | 1 | |
| 12S1282-02 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Vacuum Ready - 12,0 | 1 | |
| 12S1283-02 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Vacuum Ready - 12,0 | 2 | |
| 12S1289-02 | Docto® Adjustable Depth Control Saws (Exhaust type: Front - 12,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Front - 20,000) (Overall length: 7-1/8" (181 mm)) (Add to cart: Add To Cart) (Exhaust type: Vacuum Ready - 12,0 | 1 | |
| 12V100SK | CONTROL VALVE | 1 | |
| 13-0522-1 | UNIT CABIN PRESSURE CONTROL | 4 | |
| 13-6600-3600 | FLOW CONTROL TEST | 8 | |
| 130346-1 | CONTROL OUTFLOW VALVE | 1 | |
| 1303922-002 | VIDEO SYSTEM ADJUSTMENT KIT REMOTE CONTROL | 1 | |
| 130398-3 | OUTFLOW VALVE CONTROLLER | 1 | |
| 130522-1 | Cabin Pressure Controller | 4 | |
| 1328A000 | SEAL CONTROL VALVE | 1 | |
| 133-384015-1 | FLIGHT CONTROL RIG KIT | 1 | |
| 133-384015-9 | FLIGHT CONTROL RIGGING TOOL KIT | 1 | |
| 133-524029-1/810 | CONTROL STICK CHECK GAUGE | 1 | |
| 1338FC-25 | FLOW CONTROL SWIVEL REGULATOR | 2 | |
| 1345-6260-501 | HAND CONTROL GRIP | 1 | |
| 135-3605-666 | FEELER GAUGE,TRACKBALL ADJUSTMENT CALIBRADOR DE FOLGA DO PAINEL DE CONTROLE | 1 | |
| 1374M94P04 | CONTROL-PWR MANAGEMENT | 1 | |
| 139G2100H009A694A | KIT ENVIRONMENTAL CONTROL SYSTEM | 1 | |
| 13‐6600‐3600 | FLOW CONTROL KIT | 8 | |
| 14-6806-6011 | INSTRUMENT FOR MEASUREMENT AND CONTROL OF PRESSURE CALLED MANOMETER INSTRUMENT FOR MEASUREMENT AND CONTROL OF PRESSURE CALLED MANOMETER | 23 | |
| 14-6807-6011 | INSTRUMENTO PARA MEDIDA E CONTROLE DE PRESSOES DENOMINADO MANOMETRO | 19 | |
| 142-147 | UNIT ASSY CONTROL ANTISKID | 1 | |
| 145-21589-401 | HARNESSW402, GEN2, E,3 CONTROL | 4 | |
| 145-27814-905 | CHP PROTECTION CONTROL | 1 | |
| 146898-1 | FILTER CONTROLLER | 1 | |
| 1470-50 | Langa 1470-50 Tripod Jack Remote Control Box | 2 | |
| 1470-60 | Langa 1470-60 Tripod Jack Remote Control Box | 2 | |
| 1470.50 | remote control box | 2 | |
| 14PF465KF-10001 | FLIGHT CONTROL TORQUE TUBE SPLINE | 1 | |
| 15-0032-00 | ALTEC 286 PC SYSTEM CONTROLLER | 1 | |
| 15-214FC | Foot Control Attachment (For use with: 214 Type Riveters) (Add to cart: Add To Cart) | 1 | |
| 15-2C | Foot Control Attachment (For use with: 214 Type Riveters) (Add to cart: Add To Cart) (For use with: CP0351 Type Riveters) (Add to cart: Contact us to order) | 1 | |
| 15000 PSI Gauge | McDaniel Controls Inc Pressure 0 15000 PSI Gauge 316 SS Tube and socket | 1 | |
| 157510-3001-005 | MULTI-PURPOSE CONTROL DISPLAY UNIT | 1 | |
| 160-103025-001 | ADS CONTROLLER | 1 | |
| 1605-01-00 | CONTROL CABIN DATA AND VOICE RECORDER | 2 | |
| 1640-120-02 | CVFDR CCU SLIMELINE CONTROLLER DUAL RECORDER W/O MIC, BLACK | 1 | |
| 1651MA | AIR CONTROL UNIT ASSY -3/4IN | 1 | |
| 165D4 | DC CONTROL UNIT | 1 | |
| 1660-01-003-0662 | CONTROL BOX | 1 | |
| 16650-101 | STEERING CONTROL RW | 3 | |
| 16A46140-1 | A SET OF CONTROL CONNECTORS; | 1 | |
| 16U14521-807 | TEST SET, FLIGHT CONTROL SELF TEST | 1 | |
| 170 | INDUSTRIAL-GRADE CURING OVEN WITH PRECISE TEMPERATURE CONTROLS, IDEAL FOR COMPOSITE MATERIALS. | 1 | |
| 170-00626-405 | ENGINE CONTROL PANEL | 1 | |
| 170-00626-407 | ENGINE CONTROL PANEL | 1 | |
| 1700064F | SLAT/FLAP ACTUATOR CONTROL ELETRONI | 1 | |
| 170T06310-401 | WRENCH - RECONNECT, AILERON / ELEVATOR CONTROLS | 2 | |
| 170T06490-401 | CONTROL DEVICE, AFT ASSY - PYLON | 2 | |
| 170T07901-401 | FWD PAX DOOR PRODUCTION CONTROL DEV | 1 | |
| 17190-313 | CONTROL PANEL | 1 | |
| 1754 | CONTROL INTERCOMMUNICATION | 1 | |
| 17TES0055 | CONTROL UNIT POST MOD | 2 | |
| 17TES0300 | CONTROL UNIT POST MOD | 1 | |
| 180-500 | TAILCONE COVER, specify if control cables are coming out of tailcone | 1 | |
| 18122-T | 18122-T;PSD90-1C 18122/20-6773-10 Simulation Control Tested | 1 | |
| 18300-001 | TEST & CONTROL MODULE | 1 | |
| 1865AGE1 | POWER CONTROL MODULE REPARING KIT | 1 | |
| 1875MK4 | VSV, CONTROL UNIT VALVE | 1 | |
| 1875MK5 | VSV, CONTROL UNIT VALVE | 1 | |
| 189DTT | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 1 | |
| 189DTT-U | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 1 | |
| 189ETT-U | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 1 | |
| 19000-090 | FLUSH CONTROL UNIT | 1 | |
| 19000-305-1 | CONTROL CABLE ASSY | 1 | |
| 19000-525 | CONTROL CABLE WASTE VACUUM SYS-TEM | 4 | |
| 1901775-1 | HYD HANDLE CONTROL ASSY 2.1M | 1 | |
| 193D-03 | FIRE CONTROL UNIT | 1 | |
| 196K8009 | WRENCH, FUEL CONTROL SHAFT | 1 | |
| 196K8009 REV NC | WRENCH, FUEL CONTROL SHAFT | 1 | |
| 196T07360-401 | PINS, RIGGING - FLIGHT CONTROLS | 1 | |
| 198-505-9004 | APU LOAD CONTROL VALVE DISCHARGE COVER | 1 | |
| 198T04450-251 | SOFTWARE LOADER, FCC - FLIGHT CONTROL COMPUTER | 1 | |
| 1999/935 | GENRATOR CONTROL BOX | 1 | |
| 19BZ44 | BRISKHEAT® TABLE TOP COMPOSITE CURING TEMPERATURE CONTROLLER W/VACUUM KIT, UNIVERSAL VOLTAGE - 19BZ44 | 1 | |
| 1C5467G2 | CORROSION CONTROL WATER WASH TRAILER | 1 | |
| 1E30-2 | BLEED AIR CONTROL TEST BOX (PARKER-HANNIFIN CORP.) | 4 | |
| 1SF4719-501 | L/E SLAT CONTROL LOCK | 1 | |
| 1SF5124-501 | REMOTE AIR TEST CONTROLLER | 1 | |
| 2-141-170-24 | SET TEMPARETURE CONTROL | 1 | |
| 2-525442-1 | PIGE DE CONTRÔLE (AVEC COC) | 1 | |
| 2-525446-4 | PIGE DE CONTRÔLE (AVEC COC) | 1 | |
| 2-8332-2 | BRAKE SYSTEM CONTROL UNIT | 3 | |
| 200-12419-101 | AFIS CONTROL PANEL | 1 | |
| 200-972-1 | FIXTURE INSTALLATION, ENGINE CONTROLS, QEC FIRE WALL | 1 | |
| 200317658-30 | TEST SET, FLIGHT CONTROL | 1 | |
| 200910-CA-2 | CONTROL VALVE | 1 | |
| 201 | SHAKER ASSY, CONTROL Â | 8 | |
| 2020-1 | AUDIO CONTROL PANEL TESTER | 5 | |
| 2024492-1 | Cable/control box | 1 | |
| 2024815-1 | TORQUE MOTOR CONTROLLER PANEL | 1 | |
| 204-91931-1 | ANTENNA DRIVE CONTROL SET | 1 | |
| 2041220-0402 | CONTROL UNIT | 3 | |
| 2041220-0424 | CONTROL UNIT | 7 | |
| 2041220â?0402 | CONâ4BÂ CONTROLÂ UNIT | 3 | |
| 2041223-0408 | CONTROL UNIT | 2 | |
| 2041223-0417 | CONTROL UNIT | 5 | |
| 20549-SIC | LOOP CONTROLLER | 1 | |
| 20549S1 | LOOP CONTROLLER | 1 | |
| 20549SI | LOOP-CONTROLLER | 5 | |
| 20549SI-201 | LOOP CONTROLLER HARNESS | 2 | |
| 20549SIC | Loop Controller | 1 | |
| 20549SIC-REV- | LOOP CONTROLLER | 1 | |
| 20549SIC-REV- 1 | LOOP-CONTROLLER | 1 | |
| 20549SIC-REV-1 | LOOP-CONTROLLER | 1 | |
| 20595SIC | Loop Controller | 1 | |
| 206-001-194-101 | TUBE ASSY LOWER CONTROL TUBE | 1 | |
| 2069-3 | WINDSHIELD WIPER CONTROL UNIT | 1 | |
| 20791-02AB | CABIN PRESSURE CONTROLLER | 1 | |
| 20791-03AB | CONTROLLER-PRESSURE | 1 | |
| 20791-12AC | CONTROLLER-PRESSURE | 1 | |
| 20791-13AC | CONTROLLER-PRESSURE | 1 | |
| 21-10939 | FILTER RUDDER CONTROL | 1 | |
| 2100RX4X6 | BAGS - CONDUCTIVE, STATIC CONTROL (4" X 6") (PACKAGE OF 100 BAGS WITH A MINIMUM ORDER OF 10 PACKAGES) (MINNESOTA MINING AND MFG. CO.) | 1 | |
| 2117342-20 | ELECTRONIC CONTROL UNIT (ECU) (GTCP331-200A/AC/ER APU.) | 1 | |
| 2117402-3 | ELECTRONIC CONTROL BOX | 1 | |
| 2118800-2 | UNIT-APU ELEC CONTROL | 1 | |
| 2118834-100 | APU CONTROLLER | 1 | |
| 2118966-221 | 221 ELECTRONIC CONTROL UNIT (ECU) | 1 | |
| 2118966-222 | 221 ELECTRONIC CONTROL UNIT (ECU) | 1 | |
| 212-10-10-0010 | CONTROL SYSTEM LOCK DEVICE | 1 | |
| 212-27-70-0010-000 | CONTROL SYSTEM LOCK DEVICE | 1 | |
| 212-92036-0001 | Ki reglaje control Vuelo | 1 | |
| 212-92155-0001 | Kit, Engine Control Rigging Pins | 1 | |
| 2120R6X7 | BAGS - CONDUCTIVE, STATIC CONTROL | 1 | |
| 2129-1.5 | FLOW CONTROL VALVE | 1 | |
| 2140-D09-1062 | TEMP CONTROL SYS. TESTER | 1 | |
| 2140D09-1062 | TEMP CONTROL SYS. TESTER | 1 | |
| 2146.10.03.00 | CONTROL ROD STEEL FIXER | 1 | |
| 215371-0 | CONTROL,PRESSURE,RECORDIN | 1 | |
| 2154-451-1 | CONTROL CALIBRAGE CURVE | 1 | |
| 215TS07Y00 | LEVER CONTROL | 1 | |
| 21A-1-212-27-30-0001-000 | CONTROL WHEEL LOCKING TOOL | 1 | |
| 21B73-2A | GCU (CONTROL UNIT-GEN) | 1 | |
| 21B73-2B | GCU (CONTROL UNIT-GEN) | 1 | |
| 21B73-2D | GCU (CONTROL UNIT-GEN) | 1 | |
| 21B73-2E | GCU (CONTROL UNIT-GEN) | 1 | |
| 21C1296P011 | PIN,RIGGING,CONTROL | 1 | |
| 21C5931 | CONTROL SET PNEUMATIC VG ACTUATION | 1 | |
| 21C5931G01 | CONTROL PANEL | 1 | |
| 21C7815P01 | CONTROL (CONSOLE, COMPR RTR) | 1 | |
| 21C8562G01 | Tester Continuity Control | 1 | |
| 21EAA210 | Mitutoyo 21EAA210 Cable for External Control of Preset Zero (1m) | 1 | |
| 21EAA211 | Mitutoyo 21EAA211 Cable for External Control of Preset Zero (2m) | 1 | |
| 21EZA099 | Mitutoyo 21EZA099 Remote Controller | 1 | |
| 21Y999A | Lock - used when rigging rudder control system | 2 | |
| 289 | 289 (MULTIMETER DIGITAL (CONTROL TOOL)) | 6 | |
| 2211 | Strap - Adjustable Wrist, Conductive, Static Control | 2 | |
| 2212 | STRAP - ADJUSTABLE WRIST, CONDUCTIVE, STATIC CONTROL | 1 | |
| 2213 | STRAP - ADJUSTABLE WRIST, CONDUCTIVE, STATIC CONTROL | 2 | |
| 2214 | WRIST STRAP - STATIC CONTROL, CONDUCTIVE | 14 | |
| 2272 | ANTI-STATIC CONTROL | 4 | |
| 09070 | STRAP - ADJUSTABLE WRIST, CONDUCTIVE, STATIC CONTROL | 7 | |
| 11210 | PANEL, CONTROL, AUDIO, COPILOT | 4 | |
| 11615 | TELEDYNE CONTROLS DEMO SYSTEMS PDL615 ARINC 615 PORTABLE DATA LOADER | 1 | |
| 13020 | BAGS - CONDUCTIVE, STATIC CONTROL (4" X 6") (PACKAGE OF 100 BAGS) | 5 | |
| 13210 | VALVE,LINEAR,DIRECTIONAL CONTROL | 8 | |
| 14810 | Strap - Adjustable Wrist, Conductive, Static Control | 1 | |
| 20585 | BURNER CONTROL UNIT HEATER POLAR GSH-1 | 1 | |
| 23580 | PROCESS CONTROL KIT PT & MT | 1 | |
| 31211 | CONTROL RACK POTENTIOMETER TRANSDUCER | 1 | |
| 32710 | HFK-02 FLOW CONTROL AND CHECKOUT RAT TEST | 1 | |
| 061429 | LCU-2 (Lubro Control Unit) | 1 | |
| 103988 | POTENTIO METER CONTROL KNOB | 1 | |
| 0111179 | BOX-CHRONOMETER CONTROL | 1 | |
| 114327 | 114327;3550OPT16 Positive Train Control | 2 | |
| 134899 | MONITORING AND CONTROL ELECTRONIC BOX | 1 | |
| 139010 | CONTROL.. | 2 | |
| 139263 | 139263;7200 Remote Power Supply Control | 1 | |
| 140416 | 140416;Controller; Touchscreen Monitor w/M4 GUI | 1 | |
| 145740 | HDC40i Hybrid Controller | 1 | |
| 145776 | BF120 ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145791 | BF060 ESD Brushless Driver w/Speed Control & Soft Start (4mm HIOS Dr.) V3 | 1 | |
| 145792 | BF060P ESD Brushless Driver w/Speed Control & Soft Start (4mm HIOS Dr.) V3 | 1 | |
| 145793 | BF080 ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145794 | BF080P ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145795 | BF120P ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145820 | HDC-35i Hybrid Controller | 1 | |
| 145832 | BFS060 ESD Soft Stop Brushless Driver w/Speed Control & Soft Start (4mm HIOS Dr.) V3 | 1 | |
| 145833 | BFS080 ESD Soft Stop Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145834 | BFS120 ESD Soft Stop Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145835 | BFS060 ESD Soft Stop Plus Brushless Driver w/Speed Control & Soft Start (4mm HIOS Dr.) | 1 | |
| 145836 | BFS080 ESD Soft Stop Plus Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) | 1 | |
| 145837 | BFS120 ESD Soft Stop Plus Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) | 1 | |
| 145838 | BFT060 ESD Soft Stop Brushless Driver w/Angle Control & Auto-Reverse (4mm HIOS Dr.) | 1 | |
| 145839 | BFT080 ESD Soft Stop Brushless Driver w/Angle Control & Auto-Reverse (1/4" F/Hex) | 1 | |
| 145840 | BFT120 ESD Soft Stop Brushless Driver w/Angle Control & Auto-Reverse (1/4" F/Hex) | 1 | |
| 145841 | BFA060 ESD Robotic Brushless Driver w/Speed Control (1/4" F/Hex) | 1 | |
| 145842 | BFA080 ESD Robotic Brushless Driver w/Speed Control (1/4" F/Hex) | 1 | |
| 145843 | BFA120 ESD Robotic Brushless Driver w/Speed Control (1/4" F/Hex) | 1 | |
| 145846 | NF150-A ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145847 | NF220-A ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145848 | NF450-A ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145849 | NF150P-A ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145850 | NF220P-A ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145851 | NF450P-A ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145858 | NFT150-A ESD Brushless Driver w/Angle Control & Auto-Reverse (1/4" F/Hex) | 1 | |
| 145859 | NFT220-A ESD Brushless Driver w/Angle Control & Auto-Reverse (1/4" F/Hex) | 1 | |
| 145860 | NFT450-A ESD Brushless Driver w/Angle Control & Auto-Reverse (1/4" F/Hex) | 1 | |
| 145861 | NFA150-A ESD Robotic Brushless Driver w/Speed Control (1/4" F/Hex) | 1 | |
| 145862 | NFA220-A ESD Robotic Brushless Driver w/Speed Control (1/4" F/Hex) | 1 | |
| 145863 | NFA450-A ESD Robotic Brushless Driver w/Speed Control (1/4" F/Hex) | 2 | |
| 145865 | NFS150-A ESD Soft Stop Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145866 | NFS220-A ESD Soft Stop Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145877 | YFC-35D Controller | 1 | |
| 145884 | BF060 ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145885 | BF060P ESD Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145888 | BFS060 ESD Soft Stop Brushless Driver w/Speed Control & Soft Start (1/4" F/Hex) V3 | 1 | |
| 145890 | BFT060 ESD Soft Stop Brushless Driver w/Angle Control & Auto-Reverse (1/4" F/Hex) | 1 | |
| 145904 | BF120 ESD Brushless Driver w/Speed Control & Soft Start (4mm HIOS Dr.) V3 | 1 | |
| 145917 | SDC-24 Controller | 1 | |
| 145956 | SDC-40 Controller | 1 | |
| 145961 | BF080 ESD Brushless Driver w/Speed Control & Soft Start (4mm HIOS Dr.) V3 | 1 | |
| 145994 | BFA120-ESD Robotic Brushless Driver w/Speed Control (4mm HIOS Dr.) | 1 | |
| 150398 | CONTROL MAIN PRINTED CIRCUIT CARD PC2 | 1 | |
| 157657 | REMOTE CONTROL CABLE 15,457C, | 1 | |
| 177337 | DOWEL FOR LOCKING THE CONTROL LINK ROD | 1 | |
| 191005 | CONTROL BOX | 1 | |
| 202620 | CONTROL BOX | 1 | |
| 216167 | Push Rod – Control | 1 | |
| 218530 | CONTROL BOARD | 1 | |
| 2250H100 | VIBRATION TOOL CONTROL (TM4865G001 SN. 22331-01) | 1 | |
| 2254850-1 | PMAT XS TELEDYNE CONTROLS | 1 | |
| 2285/90.02 | 2285/90.02;Standard Stereo Headset with Volume Control | 1 | |
| 2299002773Z | ASSY PCB CONTROL BOARD SMT INC | 1 | |
| 23-2 | WINDOW HEAT CONTROL | 4 | |
| 2309-T006-001 | CONTROL SURFACE BACKFLASH CALCULATION SOFTWARE | 14 | |
| 23180-00-02 | ELECTRONIC CONTROL UNIT | 1 | |
| 233U4215-1 | CONTROL PANEL: GROUND TESTS, | 1 | |
| 235078 | TEMPERATURE CONTROLLER, 81 °C | 4 | |
| 253800 | CABIN PRESSURE CONTROLLER TEST SET | 1 | |
| 1014758 | WASH UNIT THIS TOOL IS USED TO SUPPLIES AND CONTROLS THE WATER TO THE WASH ADAPTOR. | 1 | |
| 1072500 | CONTROL VALVE | 1 | |
| 1072501 | CONTROL VALVE | 1 | |
| 1072800 | CONTROL VALVE | 2 | |
| 1072801 | CONTROL VALVE | 2 | |
| 1256728 | CONTROLL BOX ,HYDRAULIC SYSTEM COMPONENTS TEST STAND | 1 | |
| 1781313 | TD Control Tester | 1 | |
| 1900677 | CONTROL PISTON RESIZING TOOL | 1 | |
| 1900678 | CONTROL PISTON BULLET | 1 | |
| 2000164 | SLIP SLEEVE-CONTROL PORT | 1 | |
| 2020359 | 28VDC Base Module (un-controlled). Both AC and DC outputs cannot be used at the same time | 1 | |
| 2020360 | Second 400Hz Output - includes additional contactor and controls, excludes additional output cable | 1 | |
| 2033150 | KIT, OVERHAUL, CONTROL VALVE, MFR: J.D.NEUHAUS, P/N: 32211 | 1 | |
| 2041220 | CONTROL UNIT | 1 | |
| 2041223 | CONTROL UNIT | 1 | |
| 2557824 | Fuel Control Shipping Container | 1 | |
| 20080150 | B. FLIGHT CASE FOR CONTROL UNIT | 1 | |
| 23030179 | TEST SET – ELECTRONIC, TEMPERATURE DATUM CONTROL | 1 | |
| 23034202 | TEST SET N2 OVERSPEED CONTROL | 1 | |
| 23055346 | FUEL CONTROL GOVERNOR WRENCH | 2 | |
| 23065107 | FUEL CONTROL UNIT | 1 | |
| 23093342 | CONTROLLER | 1 | |
| 23093346 | NOM. CONTROL UNIT SUPERVISORY, TURBINE ENGINE - VE | 1 | |
| 0164851980 | FUEL CONTROL UNIT | 1 | |
| 0177698350 | ELECTRONIC CONTROL UNIT | 1 | |
| 0292697480 | CONTROL HARNESS | 1 | |
| 0292697560 | CONTROL HARNESS | 1 | |
| 0292697620 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0292697630 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0292697640 | CONTROL AND MONITORING HARNESS | 1 | |
| 0292697650 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0292697660 | CONTROL AND MONITORING HARNESS | 1 | |
| 0292697690 | CONTROL AND MONITORING HARNESS | 1 | |
| 0292697770 | CONTROL AND MONITORING HARNESS | 1 | |
| 0292697800 | P101 CONTROL HARNESS | 1 | |
| 0292697830 | P201 P203 CONTROL HARNESS | 2 | |
| 0292697840 | P101 P103 CONTROL HARNESS | 1 | |
| 0292697850 | P100 CONTROL AND MONITORING HARNESS | 1 | |
| 0292697870 | P100 CONTROL AND MONITORING HARNESS | 1 | |
| 0292697880 | P101 P103 CONTROL HARNESS | 1 | |
| 0298750050 | HARNESS,CONTROL | 1 | |
| 0298757640 | CONTROL AND MONITORING HARNESS | 1 | |
| 0298757740 | P100 CONTROL AND MONITORING HARNESS | 1 | |
| 0301047820 | CONTROL HARNESS | 1 | |
| 0301057870 | CONTROL HARNESS | 1 | |
| 0301057880 | CONTROL HARNESS | 1 | |
| 0301057890 | CONTROL HARNESS | 1 | |
| 0301057900 | CONTROL HARNESS | 1 | |
| 0301057960 | CHECK AND CONTROL HARNESS | 1 | |
| 0301057970 | CHECK & CONTROL HARNESS | 1 | |
| 0301067680 | CONTROL AND MONIT. HARNESS | 1 | |
| 0301547080 | CONTROL HARNESS CONTROL HARNESS | 1 | |
| 0301547670 | CHECK AND CONTROL HARNES | 1 | |
| 0301547690 | CHECK AND CONTROL HARNESS | 1 | |
| 0319760170 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0319760180 | CONTROL HARNESS | 1 | |
| 0319760190 | CONTROL AND MONITORING HARNESS | 1 | |
| 0319767910 | CONTROL AND MONITORING HARNESS | 1 | |
| 0319768240 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0319768270 | HARNESS,CONTROL AND MONITORING | 1 | |
| 0319768370 | CONTROL HARNESS | 1 | |
| 0319768380 | CONTROL HARNESS | 1 | |
| 0319768390 | CONTROL HARNESS | 1 | |
| 0319768400 | CONTROL HARNESS | 1 | |
| 0319768410 | CONTROL HARNESS | 1 | |
| 0319768420 | CONTROL AND MONITORING HARNESS | 1 | |
| 0319870100 | FUEL CONTROL UNIT,ADJUSTED | 2 | |
| 0319922390 | FUEL CONTROL UNIT,ADJUSTED | 1 | |
| 0356750110 | P100 CONTROL AND MONITORING HARNESS | 1 | |
| 0356750150 | P101 P103 CONTROL HARNESS | 1 | |
| 0465750240 | P101 P103 CONTROL HARNESS | 1 | |
| 0465750250 | P100 CONTROL AND MONITORING HARNESS | 1 | |
| 0620751110 | EN-FAISCEAU COMMANDE ET CONTROLE | 1 | |
| 1884370003 | REMOTE CALIBRATION - CONTROL UNIT | 1 | |
| 1884370209 | REMOTE CALIBRATION - CONTROL UNIT | 1 | |
| 18905810000 | PRECISION PRESSURE CONTROLLER-MONITOR | 1 | |
| 18906010000 | PRECISION PRESSURE ALTITUDE CONTROLLER | 1 | |
| 18960860000 | PRECISION PRESSURE CONTROLLER | 1 | |
| 024E128400 | TEST CABLE, CONTROL UNIT | 2 | |
| 200301E00000308 | SFCC-SLAT AND FLPA CONTROL COMPUTER | 1 | |
| 24441-01AB | CONTROLLER-PRESSURE | 1 | |
| 25-7Y21A | GAUGE, RIGGING TELEFLEX CONTROL | 2 | |
| 25-8NF841-1A | TRIM SERVO CONTROLLER | 1 | |
| 250A2301P0001 | AERO CONTROLS TOOLBOX | 1 | |
| 251A2170TF1-1001 | FIXTURE - CONTROL VALVE FLOW GRIND | 1 | |
| 251A2170TF1-101 | FIXTURE, CONTROL VALVE FLOW GRIND | 1 | |
| 2524439-4-2 | FUEL CONTROL | 1 | |
| 2540-01-301-8053 | STATIC CONTROL WRIST STRAP | 1 | |
| 255120-102 | BIN CONTROLLER CARD | 1 | |
| 256325-01 | CONTROL DISPLAY UNIT | 1 | |
| 256535-03 | PALLET CONTROL UNIT | 1 | |
| 256535-04 | PALLET CONTROL UNIT | 1 | |
| 257890-02-02 | SYSTEM TEST CONTROL | 1 | |
| 2590M00P13 | SOFTWARE VERSION L1A0850 ( EEC FADEC CONTROL) 2590M00P13 1 SET | 1 | |
| 25YTS.303 R1A. | ADAPTER/CONTROL VALVE AND HOSE FOR ENGINE FEED FLEXIBLE HOSE. | 1 | |
| 260-8XPI | STRAP -ADJUSTABLE WRIST,CONDUCTIVE,STATIC CONTROL | 8 | |
| 260156 | EZ-25RPC Posi-Control Articulated Torque Arm | 1 | |
| 260157 | EZ-40RPC Posi-Control Articulated Torque Arm | 1 | |
| 260158 | EZ-100RPC Posi-Control Articulated Torque Arm | 1 | |
| 260161 | Cable 25P I/O (DPC Touch Posi-Control to HDC v1.3 & SDC v1.x Controllers) | 1 | |
| 260165 | EZ-12RPC Posi-Control Articulated Torque Arm | 1 | |
| 260197 | EZ-40RPC Posi-Control Articulated Torque Arm (800mm) | 1 | |
| 260212 | EZ-30T APC Posi-Control Telescoping Arm (Max. Reach 37.5") | 1 | |
| 260213 | EZ-30T/1500 APC Posi-Control Telescoping Arm (Max. Reach 59") | 1 | |
| 260214 | EZ-30T/2000 APC Posi-Control Telescoping Arm (Max. Reach 78") | 1 | |
| 260215 | EZ-80T/1500 APC Posi-Control Telescoping Arm (Max. Reach 59") | 1 | |
| 260216 | EZ-80T/2000 APC Posi-Control Telescoping Arm (Max. Reach 78") | 1 | |
| 260217 | EZ-140T/1500 APC Posi-Control Telescoping Arm (Max. Reach 59") | 1 | |
| 260218 | EZ-140T/2000 APC Posi-Control Telescoping Arm (Max. Reach 78") | 1 | |
| 260219 | EZ-30T LPC Posi-Control Telescoping Arm (Max. Reach 37.5") | 1 | |
| 260220 | EZ-30T/1500 LPC Posi-Control Telescoping Arm (Max. Reach 59") | 1 | |
| 260221 | EZ-30T/2000 LPC Posi-Control Telescoping Arm (Max. Reach 78") | 1 | |
| 260222 | EZ-80T/1500 LPC Posi-Control Telescoping Arm (Max. Reach 59") | 1 | |
| 260223 | EZ-80T/2000 LPC Posi-Control Telescoping Arm (Max. Reach 78") | 1 | |
| 260224 | EZ-140T/1500 LPC Posi-Control Telescoping Arm (Max. Reach 59") | 1 | |
| 260225 | EZ-140T/2000 LPC Posi-Control Telescoping Arm (Max. Reach 78") | 1 | |
| 260226 | EZ-30T LAPC Posi-Control Telescoping Arm (Max. Reach 37.5") | 1 | |
| 260227 | EZ-30T/1500 LAPC Posi-Control Telescoping Arm (Max. Reach 59") | 1 | |
| 260228 | EZ-30T/2000 LAPC Posi-Control Telescoping Arm (Max. Reach 78") | 1 | |
| 260229 | EZ-80T/1500 LAPC Posi-Control Telescoping Arm (Max. Reach 59") | 1 | |
| 260230 | EZ-80T/2000 LAPC Posi-Control Telescoping Arm (Max. Reach 78") | 1 | |
| 260231 | EZ-140T/1500 LAPC Posi-Control Telescoping Arm (Max. Reach 59") | 1 | |
| 260232 | EZ-140T/2000 LAPC Posi-Control Telescoping Arm (Max. Reach 78") | 1 | |
| 260254 | Cable for Easy Push Kit (for MDC Controller) | 1 | |
| 260290 | DPC-Touch Posi-Control System V2 | 1 | |
| 260331 | CONTROL: ZAPI COMBI AC0, | 2 | |
| 2610-8004-002 | MANUEL COMPUTER CONTROLLER | 1 | |
| 263BA204-C | FAN CONTROL | 1 | |
| 2656G | ALTIMETER CODER CONTROLLER | 1 | |
| 269T9286 | Rigging Aid Tail Rotor Control | 1 | |
| 269T9320 | Tail Rotor Pitch Control Staking Tool | 1 | |
| 27-1-3584A | POWER CONTROL RIGGING SET | 1 | |
| 27-1-3613 | Pitch Control Testbox | 1 | |
| 27-1-3770 | Landing Gear Control Testbox | 1 | |
| 27-1-3913 | CONTROLLER - AIR PRESSURE | 1 | |
| 27-1-4441 | CONTROLLER | 1 | |
| 27-98611 | End Plate & Control Upgrade (Description: Type D Models) (Add to cart: Add To Cart) | 1 | |
| 27-98711 | End Plate & Control Upgrade (Description: Type D Models) (Add to cart: Add To Cart) (Description: Type EA Models) (Add to cart: Contact us to order) | 1 | |
| 27000-17 | CONTROL, PCU, FLIGHT SPOILER | 1 | |
| 280353 | WRENCH - FUEL CONTROL UNIT ADJUSTER | 4 | |
| 281160 | PANEL, PNEUMATIC CONTROL TEST | 1 | |
| 282645 | GAGE - ACCELERATION LIMITER, FUEL CONTROL CRACK PRESSURE - | 7 | |
| 286597 | BOARD,PC,AY,TR CONTROLS | 1 | |
| 293017 | DISPLAY CONTROLLER ASSEMBLY | 1 | |
| 293454 | DISPLAY CONTROLLER ASSY | 1 | |
| 296408 | Remote Switching Control Box | 1 | |
| 298261 | TEST FIXTURE FUEL CONTROL | 1 | |
| 310057 | I/O Cable for MD Controller (44P Male to 25P Male) 3m | 1 | |
| 310072 | ADC-100 Controller | 1 | |
| 310073 | ADC-200 Controller | 1 | |
| 310074 | ADC-400 Controller | 1 | |
| 310089 | Lift Up Stand Kit for MDC Controller | 1 | |
| 310112 | Cable 25P I/O (MDC Controller to Auto Bit Socket Trays) 3 Meters | 1 | |
| 310115 | Cable 25P I/O (MDC Controller to Auto Bit Socket Trays) 5 Meters | 1 | |
| 310157 | MDC-26 Controller V2 with SD Card Data Memory (110V) | 1 | |
| 310158 | MDC-32 Controller V2 with SD Card Data Memory (110V) | 1 | |
| 310159 | MDC-26 Controller V2 with SD Card Data Memory (230V) | 1 | |
| 310160 | MDC-32 Controller V2 with SD Card Data Memory (230V) | 1 | |
| 310162 | Cable 44P I/O (DPC-Touch to MDC Controller-DB25(M) and PLC-DB25(M) | 1 | |
| 310163 | Power Cord for ADC Controller (UK) | 1 | |
| 310193 | Cable 25P I/O for MDC Controller (Male to Male) 1.8m | 1 | |
| 310203 | Vertical Stand for ECD & ECTD Controller | 1 | |
| 310224 | ADC-2K Controller | 1 | |
| 310226 | ADC-1K Controller | 1 | |
| 313000 | ECD-5000U Controller (120V) | 1 | |
| 313002 | ECD-5000E Controller (230V) | 1 | |
| 313003 | ECTD-5000U Controller (120V) | 1 | |
| 313004 | ECTD-5000E Controller (230V) | 1 | |
| 313005 | EPC-10 Controller | 1 | |
| 313197 | ECD-4000U Controller (120V) | 1 | |
| 313198 | ECD-4000E Controller (230V) | 1 | |
| 322160 | CABLE DE CONTROLE T49,5 CFM56 | 2 | |
| 322161 | CABLE DE CONTRÔLE T49,5 CFM56 | 1 | |
| 2700030 | CONTROL PEC SUBASSEMBLY MANUAL TEST BOX | 1 | |
| 2700038 | CONTROL PEC TEST LEAD 1 | 1 | |
| 2700039 | CONTROL PEC TEST LEAD 2/3 | 1 | |
| 2700TC14751 | Flight Control Sling | 1 | |
| 27136290004-38 | TOOL, CONTROL OF THE CORRECT GEARING | 1 | |
| 27400001-001 | CONTROL SURFACE BALANCE STANDS | 1 | |
| 2754791 | FUEL CONTROL TEST SET | 1 | |
| 262634000 | CONTROL ROLLER FOR WELDING | 1 | |
| 28-0-1268 | F100 AIR SUPPLY CONTROL | 1 | |
| 28-0-1608C | AIR PRESS CONTROLL (CON GAUGE 0-60 ) | 2 | |
| 28-0-1827C | FIXATION TOOL (STAB CONTROL UNIT REMOVAL) | 3 | |
| 28-0-2055 | SET - FLIGHT CONTROLS | 1 | |
| 28-0-3938B | F100 POWER CONTROL RIG KI | 1 | |
| 28-0-4907 | CONTROLLER SHUTOFF | 1 | |
| 28-01268N | F100 AIR SUPPLY CONTROL | 3 | |
| 2801268N | CONTROLLER AIR SUPPLY | 3 | |
| 280353PM | WRENCH - FUEL CONTROL UNIT ADJUSTER | 1 | |
| 2803938B | SET RIGGING PIN POWER CONTROLS | 1 | |
| 281160-1 | TEST PANEL PNEUMATIC CONTROL | 1 | |
| 281160-1,281160-2 | PNEUMATIC CONTROL TEST PANEL | 1 | |
| 281160-2 | PNEUMATIC CONTROL TEST PANEL | 1 | |
| 284021-1 | TEST STATION,FUEL CONTROL SYSTEM COMPONENTS | 1 | |
| 284021-1-1 | TEST STATION FUEL CONTROL SYSTEM | 1 | |
| 284763-1-1 | ADAPTER SPEED INCREASER FUEL CONTROL | 1 | |
| 285T0855-5 | MODULE ASSY - CHIME CONTROLLER) | 1 | |
| 285W0162-10 | CARGO CONTROLLER | 1 | |
| 285W0863-3A | CABIN CONTROL PANEL | 1 | |
| 285W0863-5 | CABIN CONTROL PANEL | 1 | |
| 285W0863-6 | CABIN CONTROL PANEL | 1 | |
| 285W0863-7 | CABIN CONTROL PANEL | 1 | |
| 287556-1 | CONTROL BOX ELECTRICAL VALVE TEST | 1 | |
| 287676-1 | MANÓMETROS DE CONTROL PRUEBA Nº 4 JT9D | 1 | |
| 287744-1 | ELECTRICAL VALVE TEST CONTROL BOX | 1 | |
| 287749-1 | CONTROL BOX ELECTRICAL VALVE TEST | 1 | |
| 2880-2 | CONTROLLER - INNERLI | 2 | |
| 289132-1 | CONTROL BOX ELECTRICAL VALVE TEST | 1 | |
| 289173-1 | CONTROL BOX ELECTRICAL VALVE TEST | 1 | |
| 289173-1-1 | ELECTRICAL CONTROL BOX | 1 | |
| 289210-1 | CONTROLLER ELECTRIC VALVE TEST | 1 | |
| 289248-1 | CONTROL BOX ELECTRICAL VALVE TEST | 1 | |
| 289542-1 | ADAPTER TEST STAND FUEL CONTROL | 1 | |
| 289543-2 | CONTROLLER-TORQUE MOTOR AND SOLENOID | 1 | |
| 289590-1 | ADAPTER DIRECTIONAL CONTROL FILTER | 1 | |
| 290270-2-1 | APU TEMP CONTROL TOOL | 5 | |
| 291139-1 | ADAPTER ASSEMBLY FUEL CONTROL | 1 | |
| 291168-1 | Valve Test Controller | 1 | |
| 291259-1 | CONTROL BOX, ELECTRI- CAL VALVE TEST | 1 | |
| 291259-2 | CONTROL BOX ELECTRICAL | 1 | |
| 291350-3 | CONTROL PANEL CONSOLE | 1 | |
| 2917280 | CONTROL VALVE | 1 | |
| 29201266051 200315 | SAFETY CABINET AIR CONTROL WITH FAN | 1 | |
| 293155-1 | FUEL CONTROL VALVE CAP | 1 | |
| 293454-04 | DISPLAY CONTROLLER DUAL 400HRZ Y 28 VDC OUT PUT | 1 | |
| 293838-2 | REMOTE SWITCHING CONTROL ASSY | 1 | |
| 294513-2 | REMOTE SWITCHING CONTROL | 1 | |
| 294877-1 | ELECTRICAL CONTROL PANEL | 1 | |
| 294888-1 | SOLENOID CONTROLLER | 1 | |
| 294888-2 | CONTROLLER - TORQUE AND SOLENOID | 1 | |
| 294889-1 | FUEL CONTROL TEST STAND ADAPTER | 1 | |
| 296069-1 | CONTROL ASSEMBLY REMOTE SWITCHING | 1 | |
| 29622-1 | CONTROL BOX | 1 | |
| 296408-1 | REMOTE SWITCHING CONTROL BOX | 1 | |
| 296408-2 | REMOTE SWITCHING CONTROL BOX | 1 | |
| 296436-2 | ELECTRICAL VALVE TEST CONTROL BOX | 1 | |
| 296530-1 | PLUG, FILTER ELEMENT, FUEL CONTROL | 1 | |
| 296695-1 | ELECTRICAL CONTROL BOX | 1 | |
| 296706-1 | ELECTRICAL CONTROL BOX | 1 | |
| 2981-03 | TIMER MONITOR CONTROL UNIT | 1 | |
| 298261-1 | FUEL CONTROL TORQUE | 1 | |
| 298262-2 | FLANGE CAP FUEL CONTROL | 1 | |
| 298853-1 | PULLER, SLEEVE, FUEL CONTROL RHEOSTAT | 1 | |
| 29A003 | Remot control & led bargraph locatorUH | 1 | |
| 29I005 | CONTROLLER CHARGER | 1 | |
| 2A346 | CONTROL PIN | 1 | |
| 2AJ65B80985 | ASSEMBLY JIG - CLUTCH PACK ASSEMBLY, AUTO THROTTLE ENGINE CONTROL | 1 | |
| 2AJ65B81667 | ASSEMBLY JIG - CONTROL ASSY T.E. FLAP DRIVE INBOARD & OUTBOARD | 1 | |
| 2C14137G01 | HYD PUMP FUEL CONTROL TOOL | 11 | |
| 2C14244 | WRENCH SET-MAIN ENGINE CONTROL | 1 | |
| 2C14287G01 | ENGINE PRESERVATION MAIN ENGINE FUEL CONTROL | 1 | |
| 2C14733 | TOOL SET, REMOVAL-MAG. SEAL, N1 CONTROL ADAPT. | 2 | |
| 2C14733 REV C | TOOL SET, REMOVAL-MAG. SEAL, N1 CONTROL ADAPT. | 1 | |
| 2C14797 | FIXTURE, INSTALL-REMOVE-MAIN ENGINE FUEL CONTROL | 1 | |
| 2C14797 REV B | FIXTURE, INSTALL/REMOVE -MAIN ENG. FUEL CONTROL | 1 | |
| 2C14852 | FIXTURE INSTALL-REMOVE-MAIN ENG FUEL CONTROL | 1 | |
| 2C14933G04 | BINARY CODE CONTROLLER | 2 | |
| 2C14969 | READER-POWER MANAGEMENT CONTROL | 1 | |
| 2C5931G01 | CONTROL - SET VARIABLE GEOMETRY | 1 | |
| 2C6276 | WRENCH SET-FUEL CONTROL PUMP | 1 | |
| 2C6276G03 | WRENCH SET FUEL CONTROL PUMP | 2 | |
| 2C6276P03 | WRENCH SET, FUEL CONTROL PUMP | 2 | |
| 2C6367 | PLATE - RIGGING, PARKING BRAKE CONTROL | 2 | |
| 2C6367G01 | PLATE - RIGGING, PARKING BRAKE CONTROL | 10 | |
| 2C6393G01 | THROTTLE CONTROL SET | 1 | |
| 2C90085G03 | SELECTOR BOX FOR THE ENGINE CONTROL UNIT (ECU) CIRCUIT CONTINUITY | 2 | |
| 2CF65B05528-1 | FLIGHT CONTROL BALANCING | 9 | |
| 2CF65B80511 | FIXTURE - SPRING REMOVAL AND INSTALLATION, FORCE LIMITER, LATERAL CONTROL INPUT BUS | 1 | |
| 2MIT65-27535 | TORQUE ADAPTER-AILERON CONTROL COLUMN,CAPTAINS | 1 | |
| 2MIT65B02300-1 | BUSHING PULLER AND INSERTER KIT - FLIGHT CONTROL SURFACES | 1 | |
| 2MIT65B82106 | TORQUE WRENCH ADAPTER - AILERON CONTROL | 1 | |
| 3-76877-501 | TEST SET, CABIN TEMPERATURE CONTROL SYSTEM | 1 | |
| 3000AS 2 1/4 | 3000AS 2 1/4 riveter/insertion tool with foot control and accessories | 1 | |
| 3000AS 3 1/2 | 3000AS 3 1/2 riveter/insertion tool with foot control and accessories. | 1 | |
| 3000CS 3 x 3 1/4 | Riveter/Insertion Tool Comes with foot control, hoses and connectors and neccessary hardware. | 1 | |
| 3000CS 3 x 4 1/4 | Riveter/Insertion Tool Comes with foot control, hoses and connectors and neccessary hardware. | 1 | |
| 3000CS 3 x 5 1/4 | Riveter/Insertion Tool Comes with foot control, hoses and connectors and neccessary hardware. | 1 | |
| 3000CS 6 x 3 1/2 | Riveter/Insertion Tool Comes with foot control, hoses and connectors and neccessary hardware. | 1 | |
| 3000CS 6 x 5 1/2 | Riveter/Insertion Tool Comes with foot control, hoses and connectors and neccessary hardware. | 1 | |
| 3000CS PU and Foot Control | 3000CS power unit and 3 way foot control. | 1 | |
| 3000CS Power Unit | 3000CS without yoke and foot control. Power unit only. | 1 | |
| 300XT | COMPACT VACUUM FORMING MACHINE IDEAL FOR SMALL TO MEDIUM-SIZED PARTS, FEATURING DIGITAL CONTROLS. | 1 | |
| 3022046-000 | PRESSURE CONTROL UNIT | 1 | |
| 3040-580 | N2 REGULATOR CONTROL | 1 | |
| 305136 - 4 - 2 | CONTROLLER, STATIC FREQUENCY | 1 | |
| 3059719 | WEBECTM (ENGINE CONTROL TRAND MONITORING)(SUBSCRIPTION FROM PWC) | 1 | |
| 3061/93.64 | 3061/93.64;OTN Control Plane Enhancement Software | 1 | |
| 3061/94.81 | 3061/94.81;100G_40G OTN Control Plane Enhancements | 1 | |
| 3073696 | CONTROLLER KIT | 1 | |
| 3076/63.38 | 3076/63.38;OTN Control Plane Enhancements for MTM | 1 | |
| 30P512101202-001 | FLAP HYDRAULIC CONTROL MODULE | 1 | |
| 30P841300000-003 | FIRE PROTECTION CONTROL UNIT (ALT PN: 474360-11) | 1 | |
| 31077-111 | SERVO CONTROLS SPOILER | 1 | |
| 31077-200 | SERVOCONTROL-SPOILER | 1 | |
| 31077-211 | SERVOCONTROL-SPOILER | 1 | |
| 312-00021-009 | CONTROL ELEVATOR LINK ASSY | 1 | |
| 3140182A00HJ | CONTROL PANEL | 1 | |
| 3140183A0 | CONTROL PANEL ASSY. L | 1 | |
| 31435 MFR K4358 51634-001 | UNIT CONTROL (AC GCU) | 1 | |
| 314STD-27-0011 REV. 2 | INSPECTION AND/OR ADJUSTMENT OF THE ELEVATOR CONTROL SYSTEM BACKLASH | 1 | |
| 314STD-76-0002 | ENGINE CONTROLS – REPLACEMENT OF THE START/IDLE DETENT OF THE FRONT THROTTLE-QUADRANT ASSEMBLY | 1 | |
| 3169270-6 | VALVE-EM CONTROL | 1 | |
| 3170008-1 | CONTROL COLUMN TACHOMETER | 1 | |
| 3170037-1 | CONTROL SURFAE RING PIN | 1 | |
| 3170037-12 | ENGINE FUEL CONTROL RIG PIN | 1 | |
| 3170037-13 | KIT, RIG PIN, CONTROL SURFACE | 2 | |
| 3170037-5 | ENGINE FUEL CONTROL RIG PIN | 1 | |
| 3170063-801 | GCU (GENERATOR CONTROL UNIT) TEST | 1 | |
| 3204853-4 | MANUAL CONTROL UNIT | 1 | |
| 3210500-0501 | VALVE TEST CONTROL ASSEMBLY | 1 | |
| 3210500-0502 | VALVE TEST CONTROL ASSEMBLY | 1 | |
| 3212611-1 | ARINC429/629 INTERFACE CONTROL COMPU. | 1 | |
| 322-1104-002 | REMOTE CONTROLLER | 1 | |
| 32519001 | CONTROL VALVE | 1 | |
| 3291238-2 | VALVE, CONTROL, SURGE | 1 | |
| 329695-4 | VALVE-TURBINE CLEARANCE CONTROL | 1 | |
| 33 260 94 | UNIT CONTROL, RAT | 1 | |
| 330A93-2017-00 | EXTRACTOR,BEARING PITCH CONTROL RO | 1 | |
| 330A93-2021-00 | EXTRACTOR,PITCH CONTROL ROD END | 1 | |
| 330A93-2023-00 | EXTRACTOR,BEARING PITCH CONTROL RO | 1 | |
| 330A93-2034-00 | TOOL,SEAL SEALING CONTROL | 1 | |
| 330A94-2714-11 | PIN FLIGHT CONTROL ADJUSTMENT | 1 | |
| 332A32-3207-21 | FITTING BOLT, SERVOCONTROL | 1 | |
| 332A93-3220-00 | EXTRACTORBOLT SERVO-CONTROL | 1 | |
| 332A93-3300-20 | T.R.H"WRENCH SIDE SERVO CONTROL | 2 | |
| 332A93-3694-20 | "TRH" WRENCH SIDE SERVO-CONTROL | 1 | |
| 332A93270001 | SERVO-CONTROL PROTECTIVE TOOL | 1 | |
| 332A93322000 | EXTRACTOR BOLT SERVO CONTROL | 1 | |
| 332A93329000 | EXTRACTOR BOLT SERVO‐CONTROL | 1 | |
| 332A93369420 | TRH WRENCH SIDE SERVO-CONTROL | 1 | |
| 332A94-2700-05 | FLIGHT CONTROL ADJUSTING GAGE | 1 | |
| 332A94-2790-00 | FLIGHT CONTROL TEST BOX | 1 | |
| 332A94-3202-00 | KIT 332MK1 STEADY CONTROL | 1 | |
| 332A94-3371-00 | TEMPLATE,CONTROL RIGGING, | 1 | |
| 332A94270005 | FLIGTHT CONTROL ADJUSTMENT TOOL KIT | 1 | |
| 332A94270101 | FLIGHT CONTROL RIGGING PIN | 1 | |
| 332A9427900 | FLIGHT CONTROL TEST BOX | 1 | |
| 332A96360020 | TGB/SERVO CONTROL BLANKING CAP | 1 | |
| 332U2340-25 | . HP CONTROLLER TUBE | 1 | |
| 3337457-60 | SERVOCONTROL-INBOARD | 1 | |
| 337008-26H-64 | LOCK SET, CONTROL SURFACES | 1 | |
| 3400323-9 | FIXTURE INSTALLATION, ENGINE CONTROLS, QEC FIRE WALL | 1 | |
| 34022780-1 | RIG PIN SET FLIGHT CONTROL | 1 | |
| 3402750-1 | TEST SET TEMP CONTROL SYSTEM | 1 | |
| 3402780-1 | RIG PIN SET FLIGHT CONTROL | 2 | |
| 3402780-69 | FLIGHT CONTROL RIG PIN SET | 1 | |
| 3402786-1 | COVER ENGINE CONTROLS | 1 | |
| 3402893-1 | TEMP DATUM CONTROL TEST SET | 1 | |
| 3402902-1 | RIG PIN PROPELLER CONTROL | 1 | |
| 3403117-1 | TEST SET, CONTROL BOX, HYTROL | 1 | |
| 3404040-1 | TEST SET, FLIGHT CONTROL SYS | 1 | |
| 346 B | AUDIO CONTROL CENTER | 2 | |
| 346B | AUDIO CONTROL CENTER | 2 | |
| 35-0F5-1000 | CONTROLLER, PRSOV | 14 | |
| 35-92013-0001 | FLIGHT CONTROL ELEMENTS TOOL KIT | 1 | |
| 35-92013-0002 | FLIGHT CONTROL KIT | 1 | |
| 35-92013-0003 | FLIGHT CONTROLS RIGGING KIT | 1 | |
| 35-92018-0005 | FLAP CONTROL RIGGING KIT | 1 | |
| 35-92018-0007 | Kit reglaje control flaps | 1 | |
| 35-92042-0003 | L.G INSTALLATION CONTROL RIGGING | 1 | |
| 35-92113-0001 | MANUAL RAMP DOOR CONTROL | 1 | |
| 35-92114-0001 | flight control locking | 2 | |
| 35-92166-0001 | TEMPLATE,CONTROL RIGGING,AIRCRAFT | 1 | |
| 35-92166-0002 | TEMPLATE,CONTROL RIGGING,AIRCRAFT | 1 | |
| 35-92175-0001 | GAUGE, CONTROL PEDALS | 1 | |
| 35-92175-0001 | GAUGE - CONTROL PEDALS - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 35-92178-0001 | TEMPLATE,CONTROL RI | 1 | |
| 35-92178-0002 | TEMPLATE,CONTROL RI | 1 | |
| 35-92180-0001 | Control wheel rigging | 1 | |
| 35-92180-0005 | CONTROL WHEEL GAUGE | 1 | |
| 35-92180-0005 | GAUGE - CONTROL WHEEL | 1 | |
| 35050-1 | CONTROL ASSY | 2 | |
| 350A91-2700-00 | PROTECTION, RUDDER CONTROL | 1 | |
| 350A93-3316-20 | REMOVAL / INSTALLATION - CONTROL PLATE BEARING - TAIL GEAR BOX | 2 | |
| 350A93-3317-20 | REMOVAL / INSTALLATION - CONTROL PLATE BEARING - TAIL GEAR BOX | 2 | |
| 350A94 2700 06 | ADJUSTMENT KIT FLIGHT CONTROLS | 1 | |
| 350A94-2700-00 | FLIGHT CONTROL RIGGING TOOL -INCL. 7 DEGREE PLATE & PIN | 1 | |
| 350A94-2700-00/05 | Flight Control Rigging Tool-incl. 7 degree plate & pins | 1 | |
| 350A94-2700-02 | FLIGHT CONTROL RIGGING KIT | 1 | |
| 350A94-2700-06 | FLIGHT CONTROL RIGGING TOOL KIT | 1 | |
| 350A94-2700-06/PHP | ADJUSTMENT KIT FLIGHT CONTROLS | 1 | |
| 350A94-2700-07 | KIT ADJUSTEMENT FLIGHT CONTROLS | 1 | |
| 350A94-2706-11 | SET OF PINS FOR THE FLIGHT CONTROLS | 1 | |
| 350A94-2706-11/PHP | SET OF PINS FOR THE FLIGHT CONTROLS | 1 | |
| 350A94-2706-13 | Servo Control Samm | 1 | |
| 350A94-2706-15 | PIN,SERVO CONTROL | 1 | |
| 350A94-2785-00 | FLIGHT CONTROL RIGGING KIT | 1 | |
| 350A94-2785-00/PHP | ADJUSTMENT KIT FLIGHT CONTROL | 1 | |
| 350A94-2785-01 | ADJUSTMENT KIT FLIGHT CONTROL | 1 | |
| 350A94-2785-01/PHP | ADJUSTMENT KIT FLIGHT CONTROL | 1 | |
| 350A94-2785-01或355A94-2745-06 | FLIGHT CONTROL ADJUSTMENTS | 1 | |
| 350A94-2796-01 | RULE, CONTROL | 1 | |
| 350A942700-06/PHP | ADJUSTMENT KIT FLIGHT CONTROLS | 1 | |
| 350A94270005 | ADJUSTMENT KIT FLIGHT CONTROLS | 1 | |
| 350A94270006 (CALIB) | ADJUSTMENT KIT FLIGHT CONTROLS | 1 | |
| 350A94278500 | ADJUSTMENT KIT FLIGHT CONTROL | 1 | |
| 350A94278501 | FLIGHT CONTROL ADJUSTMENT KIT | 1 | |
| 350A94278502 | KIT ADJUSTMENT, FLIGHT CONTROLS | 1 | |
| 3520-1078-01 | CONTROL ASSEMBLY | 1 | |
| 355A94-3745-01 | FLIGHT CONTROL RIDGGING KIT | 1 | |
| 355M03200001 | CLAMP AILERON SERVO CONTROL BEARING | 3 | |
| 35838 | TEST BOX - RUDDER POWER CONTROL UNIT | 1 | |
| 35M5M01140000 | PIN - RIGGING, PARKING BRAKE CONTROL | 1 | |
| 35M5M01270000 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | 4 | |
| 35OF51000 | BOARD CONTROL | 14 | |
| 3614278-1101 | CONTROL,RADAR SET | 1 | |
| 3614292-4501 | CONTROL UNIT | 1 | |
| 362A8199P1 | PDM ASSY CONTROLLER | 1 | |
| 364049-1 | HARNESS ASSEMBLY PROP. CONTROLS | 1 | |
| 365A93-3347-00 | WRENCH,TGB ATTACHMENT CONTROL | 1 | |
| 365A93-3381-00 | EXCHANGE CONTROL | 1 | |
| 365A93-3383--00 | TGB CONTROL SHAFT BEARING REPLACEMENT TOOL | 1 | |
| 365A93-3383-00 | TGB CONTROL SHAFT BEARING REPLACEMENT TOOL | 1 | |
| 365A93334700 | WRENCH,TGB ATTACHMENT CONTROL | 1 | |
| 365A94-2740-04 | TOOL KIT FLIGHT CONTROL ADJUSTMENTS | 1 | |
| 365A94-2740-06 | FLIGHT CONTROL RIGGING TOOL | 1 | |
| 365A94-2750-08 | FLYING CONTROL RIGGING KIT | 1 | |
| 365A94-2781-01 | FLYING CONTROL RIGGING KIT | 1 | |
| 365A94-2790-00 | FLYING CONTROL RIGGING KIT | 1 | |
| 365A94-3200-00 | KIT 365 STEADYCONTROL | 1 | |
| 365A94274008 | FLYING CONTROL KIT-RIGGING SET(22 ITEMS) | 1 | |
| 365A96-3347-20 | TGB CONTROL COVER | 1 | |
| 365A97-6180-00 | ACTUATOR CONTROL TESTER | 1 | |
| 365A97-6180-05 | ACTUATOR CONTROL TESTER | 1 | |
| 365A97618000 | CONTROL BOX VERIN EC155-N4 | 1 | |
| 365А94-3180-00 | TOOL,IMMOBIL,BALL JOINT,CONTROL RO | 1 | |
| 365А94318000 | TOOL,IMMOBIL,BALL JOINT,CONTROL ROD | 1 | |
| 367-359-005 | ICU-IGGS CONTROLLER UNIT | 1 | |
| 369029822-3 | PITCH CONTROL ASSY HOLDING BLOCK | 1 | |
| 369A7010-501 | ONE WAY LOCK-CONTROL SYSTEM | 1 | |
| 369A9822-3 | Pitch Control Holding Blcok | 1 | |
| 369D29822-3 | PITCH CONTROL ASSY HOLDING BLOCK | 1 | |
| 369R1820-PHF1 | HOLDING BLOCK, PITCH CONTROL ASSEMBLY | 1 | |
| 37-11 | USATCO Rivet Squeezer Floor Stands (Includes: Stand & Foot Control) (Height: 45" (114 cm)) (Add to cart: Add To Cart) | 1 | |
| 37-12 | USATCO Rivet Squeezer Floor Stands (Includes: Stand & Foot Control) (Height: 45" (114 cm)) (Add to cart: Add To Cart) (Includes: Stand, Foot Control & Conversion Head) (Height: 40" (102 cm)) (Add to cart: Add To Cart) | 1 | |
| 37-13 | USATCO Rivet Squeezer Floor Stands (Includes: Stand & Foot Control) (Height: 45" (114 cm)) (Add to cart: Add To Cart) (Includes: Stand, Foot Control & Conversion Head) (Height: 40" (102 cm)) (Add to cart: Add To Cart) (Includes: Bench Mount, Foot Control | 1 | |
| 37-18 | USATCO Rivet Squeezer Stand For Ultralite® Riveters (Includes: Floor Stand & Hands Free Foot Control-Height 40") (Add to cart: Add To Cart) | 3 | |
| 37-20 | USATCO Rivet Squeezer Stand For Ultralite® Riveters (Includes: Floor Stand & Hands Free Foot Control-Height 40") (Add to cart: Add To Cart) (Includes: Hands Free Foot Control Only (portable)) (Add to cart: Add To Cart) | 1 | |
| 371912 | OPERATING CONTROL PANEL | 1 | |
| 3716627 | CONTROL PANEL | 1 | |
| 3727466-1 | ELECTRONIC CONTROL UNIT | 1 | |
| 376060GSE1-1001 | KIT - CONTROL SURFACE BACKLASH CHECK | 1 | |
| 376088AT2 | POWER CONTROL UNIT (PCU) SIGHT GLASS REMOVAL TOOL | 1 | |
| 376088LAT2-1 | POWER CONTROL UNIT (PCU) SIGHT GLASS REMOVAL TOOL (ALTERNATE PART NUMBER) | 1 | |
| 3791165-1 | VALVE TEST ELECTRIC CONTROL BOX | 1 | |
| 3791230-2 | AMPERAGE CONTROL BOX | 1 | |
| 3791247-1 | ELECTRICAL CONTROL BOX | 1 | |
| 3791315-2 | ELECTRICAL VALVE TEST CONTROL BOX | 1 | |
| 3791318-1 | CONTROL BOX ELECTRICAL VALVE TEST | 1 | |
| 3791318-2 | VALVE TEST ELECTRICAL CONTROL BOX | 1 | |
| 3791397-1 | VALVE TEST AMPERAGE CONTROL BOX | 1 | |
| 3792315-2 | ELECTRICAL VALVE TEST CONTROL BOX | 1 | |
| 37M315-2000-000 | JAMMING DETECTION CONTROL UNIT TEST BENCH | 1 | |
| 3826 | SENSITIVE CONTROL SEAL LIFT - ACCESSORY DRIVE | 3 | |
| 3888394-120201 | CONTROL BOX | 1 | |
| 3888394-121204 | CONTROL BOX | 1 | |
| 38D34103002000 | ADAPTERS, CONTROL TOOL | 1 | |
| 39-809 | VALVE AY, CONTROL | 1 | |
| 390500-1011 | UNIT, POWER CONTROL, RUDDER | 1 | |
| 390ENGCONT | ENGINE CONTROL CABLE ADAPTER | 1 | |
| 39378360 | CONTROL PANEL USED AS TOOLING | 1 | |
| 393A5536P0001 | KIT, TOOL, MAINTENANCE (WITHOUT FOAM CONTROL) | 1 | |
| 3955669-1 | ENGINE CONTROL CABLE TORQUE ADA | 1 | |
| 396442-1 | VALVE FLOW CONTROL | 1 | |
| 397892-1 | VALVE , STARTER CONTROL | 1 | |
| 3A2-238A | MODULE-ROLL CONTROL RVDT | 1 | |
| 3AJ65B81667 | ASSEMBLY JIG - CONTROL ASSEMBLY, TRAILING EDGE FLAP DRIVE, INBOARD AND OUTBOARD | 1 | |
| 3AJ65B81667-1 | ASSEMBLY JIG - CONTROL ASSY T.E. FLAP DRIVE INBOARD & OUTBOARD | 1 | |
| 3G2505G00231 | ADAPTER, RESCUE HOIST OPERATOR CONTROL (FD-03-00) | 1 | |
| 3G6200G00831 | TOOL, M/R PITCH CONTROL LINK ADJUST. | 1 | |
| 3G6205G00432 | MAIN ROTOR PITCH CONTROL LINK ADJUSTMENT TOOL | 1 | |
| 3G6205G06131 | MAIN ROTOR PITCH CONTROL LEVER EXPANDER | 1 | |
| 3G6352V01851 | ROTOR BRAKE CONTROL MODULE | 1 | |
| 3G6405G00231 | MAIN ROTOR PITCH CONTROL LEVER EXPANDER | 1 | |
| 3G6405G00332 | TOOL, T/R PITCH CONTROL LINK ADJUST | 1 | |
| 3G6705G00131 | TOOL KIT, FIXED FLIGHT CONTROLS ADJUSTING | 1 | |
| 3G6705G00132 | TOOL KIT, FIXED FLIGHT CONTROLS ADJUSTING | 1 | |
| 3G6705G00231 | TOOL KIT, M/R ROTATING CONTROL ADJUSTING | 1 | |
| 3G6705G00332 | TAIL ROTOR ROTATING CONTROLS ADJUSTING | 1 | |
| 3G6705G04931 | TRIM CONTROL BOX ASSY | 1 | |
| 3G8205G00432 | M/R PITCH CONTROL LINK ADJUST. | 1 | |
| 3MIT65B80307-1 | ADAPTER - CONTROL COLUMN ASSEMBLY PROTRACTOR | 7 | |
| 3R1210B | ELEVATOR CONTROL COLUMN LOAD CELL | 1 | |
| 3R1223A | ELEVATOR CONTROL COLUMN LOAD CELL | 1 | |
| 3S206DM109A | CONTROLLER | 1 | |
| 3S6705G00332 | TOOL KIT, T/R ROTATING CONTROL ADJUSTIN | 1 | |
| 3SF5714-501 | RIG PIN FLIGHT CONTROL SYSTEM | 1 | |
| 4 MIT 65B80307-1 | Protector Assy - Control Colum | 32 | |
| 400-0124-002 | COCKPIT CONTROL UNIT - FLIGHT FONE | 1 | |
| 4000385-1002 | FSC-810 Flight Control System Test Panel | 1 | |
| 401-842.60 | 401-842.60;OTN Enhanced Control Plane - HDLC support - Module Option | 1 | |
| 401MFD1-1 | DCDU-DATALINK CONTROL AND DISPLAY UN | 1 | |
| 401MFD2-1 | DCDU-DATALINK CONTROL AND DISPLAY UNIT | 1 | |
| 401MFD3-2 | DATA LINK CONTROL AND DISPLAY | 1 | |
| 401MFD3-3 | DATA LINK CONTROL & DISPLAY UNIT | 5 | |
| 401MFD4-3 | DCDU DATA LINK CONTROL DISPLAY UNIT | 5 | |
| 402-809.60 | 402-809.60;Transponder Control Environment - Module Option | 1 | |
| 402-875.60 | 402-875.60;L2 Control Plane - Module Option | 1 | |
| 402MFD1-1 | DCDU-DATALINK CONTROL AND DISPLAY UNIT (GE AVIATION) | 1 | |
| 403-809.60 | 403-809.60;Transponder Control Environment - Module Option | 1 | |
| 403-875.60 | 403-875.60;L2 Control Plane - Module Option | 1 | |
| 404112-1 | UNIT CONTROL ELECT GOVERNOR, | 1 | |
| 4049760-901 | MULTICONTROLLER | 1 | |
| 4054121 | CONTROL PANEL INTERFACE | 1 | |
| 4054121-901 | CONTROL PANEL INTERFACE | 1 | |
| 4054760-901 | POWER CONTROL MODULE | 1 | |
| 4056539-107 | SYSTEM CONTROL PANEL SOFTWARE DISK | 1 | |
| 4057829-901 | CONTROL PANEL INTERFACE | 1 | |
| 4057829-902 | CONTROL PANEL INTERFACE (CPI) | 1 | |
| 406392-002 | TRANSFORMER CONTROL, | 3 | |
| 406392-2 | TRANSFORMER CONTROL, USE P/N 406392-002=6C | 1 | |
| 407-240-007-101 | FLIGHT CONTROL TOOL | 1 | |
| 407-240-018-101 | FLIGHT CONTROL TOOL | 1 | |
| 407-240-020-101 | FLIGHT CONTROL TOOL | 1 | |
| 407-240-155-101 | FLIGHT CONTROL TOOL | 1 | |
| 40A100 | CONTROL PRESSURE | 3 | |
| 41-995 | TENSION-CONTROLLED CABLE TIE INSTALLATION | 4 | |
| 415 | Audio Amplifier Control | 6 | |
| 4101305000 | CONTROL PANEL | 1 | |
| 41SG265-1 | CONTROLS PRESSURE TRANSDUCER | 6 | |
| 42-041-1 | CONTROL SHIELD & A/C FIELD TESTER | 3 | |
| 42-051-21 | TEST SET, CONTROL BOX, HYTROL | 1 | |
| 42-255-1 | CONTROL BOX | 1 | |
| 42-747-3 | CONTROL BOX | 1 | |
| 42-885-3 | UNIT-ANTI SKID CONTROL | 1 | |
| 421-G5-P4 | PITOT CONTROL CONSOLE, | 2 | |
| 421-G5-ST8 | STATIC CONTROL CONSOLE, | 2 | |
| 422-054 | FLOW CONTROL VALVE | 1 | |
| 42228-21 | HAND CONTROLLER | 1 | |
| 422696 | DILUTION CONTROL DEVICE | 1 | |
| 423439 | HARNESS INFLATION CONTROL DISASSEMBLY TOOL | 1 | |
| 4260-0029-8 | THRUST CONTROL MODULE ASSY | 1 | |
| 426HE15R | HONEYWELL SENSING AND CONTROL SEALED SWITCH | 1 | |
| 431-1 | FIXTURE TEST CONTROL BOARD | 1 | |
| 434-590001 | CONTROL LOCKS (BEECHCRAFT CORP) | 1 | |
| 4379-2 | HEAT CYCLE CONTROL CENTER | 1 | |
| 43WR896 | FUEL CONTROL TRIM TOOL | 1 | |
| 441-HP1A | PITOT COVERS w/ "REMOVE CONTROL LOCKS BEFORE TOWING" flag (set of 3) | 1 | |
| 441921-5 | FUEL CONTROL VALVE ASSY - APU | 1 | |
| 44311-700 | HOIST CONTROL PANEL | 1 | |
| 4446T71 | REVERSIBLE STATIC CONTROL WORK SURFACE MAT | 1 | |
| 4446T72 | REVERSIBLE STATIC CONTROL WORK SURFACE MAT | 1 | |
| 4446T73 | REVERSIBLE STATIC CONTROL WORK SURFACE MAT | 1 | |
| 4446T74 | REVERSIBLE STATIC CONTROL WORK SURFACE MAT | 1 | |
| 4478A0000-01 | MOTOR ACTUATOR CONTROL ELECTRONIC RIGGING BOX (RBOX) | 1 | |
| 4492027-000 | MAIN CONTROL CARD | 1 | |
| 45-135030-9/810 | CONTROL SURFACE LOCKING TOOL (BEECHCRAFT CORP) | 2 | |
| 451408000-15 | PIN FLIGHT CONTROL (AILERON TRIM TAB) | 1 | |
| 4514080002 | FLIGHTCONTROL RIG PIN | 1 | |
| 4514080002-005 | FLIGHT CONTROL RIG PIN - SECTOR & HOR. STAB. | 1 | |
| 4514080002-007 | FLIGHT CONTROL RIG PIN - ELEVATOR & RUDDER | 2 | |
| 4514080002-009 | FLIGHT CONTROL RIG PIN - ELEVATOR AFT | 2 | |
| 4514080002-011 | FLIGHT CONTROL RIG PIN - RUDDER TRIM TAB | 2 | |
| 4514080002-013 | FLIGHT CONTROL RIG PIN - AILERON | 3 | |
| 4514080002-015 | FLIGHT CONTROL RIG PIN - AILERON TRIM TAB | 1 | |
| 4611025500 | DEBRIS GUARD CONTROL TOOL | 1 | |
| 4611135517 | DEBRIS GUARD CONTROL TOOL | 1 | |
| 4611422502 | MISMATCH CONTROL TOOL | 1 | |
| 462900GSE-1003 | FIXTURE - RIGGING AND MAINTENANCE INTER-FACE, FLIGHT CONTROL SYSTEM | 1 | |
| 462900GSE-1007 | FIXTURE - RIGGING AND MAINTENANCE INTERFACE, FLIGHT CONTROL SYSTEM | 1 | |
| 462900GSE1-1001 | FIXTURE - RIGGING AND MAINTENANCE INTER-FACE, FLIGHT CONTROL SYSTEM | 1 | |
| 462900GSE1003 | RIGGING AND MAINTENANCE INTERFACE, FLIGHT CONTROL | 1 | |
| 463500-1001 | RUDDER CONTROL MODULE LOWER | 1 | |
| 4676 | CONTROL CONSOLE (GOODRICH CARGO SYSTEMS) | 1 | |
| 47-118-11 | Control Box Flap Drive | 1 | |
| 47000407L056800 | CONTROL SHROUD, ENDBAY | 1 | |
| 47000408L056800 | CONTROL SHROUD, ENDBAY | 1 | |
| 473996MST1 | WHITE FLIGHT CONTROL MANIFOLD ENVIRONMENTAL CAP | 1 | |
| 474688 | CONTROLLER AID-COND SYSTEM | 1 | |
| 4751004-1 | TEMP CONTROL TEST SE | 8 | |
| 481-814-477 | CONTROL UNIT | 1 | |
| 4810A003-02W01 | TGB CONTROL ROD SPACER | 1 | |
| 4907 | Brake control Fokker | 1 | |
| 4821963382 | APOJET R2 CONTROLLER BOARD | 1 | |
| 4916745-501 | L/G CONTROL VALVE TORQUE ADAPTER | 8 | |
| 4916765-501 | L/G CONTROL VALVE END PLUG ADAPTER | 1 | |
| 4920-01-290-8654 | TEST SET, FLIGHT CONTROL SELF TEST | 1 | |
| 4940002516475 | CORROSION CONTROL EQUIPMENT SPARES:- PAINT SHAKER | 1 | |
| 4BM54051 | CONTROL TOOL | 1 | |
| 4BM71582 | CONTROL TOOL | 1 | |
| 4BM71694 | CONTROL TOOL | 1 | |
| 4BM71698 | CONTROL TOOL | 1 | |
| 4E3133-1 | CONTROLLER | 1 | |
| 4ECW5 | STATIC CONTROL KIT | 1 | |
| 4M1T65B80307-1 | PROTRACTOR CONTROL COLUMN TOOL | 1 | |
| 4MIT65B0307-1 | PROTECTOR ASSY CONTROL | 1 | |
| 4MIT65B80307 | Protractor Assy - Control | 5 | |
| 4MIT65B80307-1 | Protractor Assembly - Control Column | 32 | |
| 4MIT65B80307-1 | PROTRACTOR ASSEMBLY-CONTROL COLUMN | 32 | |
| 4MIT65B80307-1 | PROTRACTOR ASSY-CONTROL COLUMN | 32 | |
| 4MIT65B803070-1 | PROTECTOR-ASSY, CONTROL COLUMN | 1 | |
| 4MIT65B82106 | TORQUE WRENCH ADAPTER - LOAD LIMIT AILERON CONTROL | 1 | |
| 4OHME65B05501 | HOIST FRAME ASSEMBLY - UPPER AND LOWER POWER CONTROL UNITS | 1 | |
| 50-590122-1 | CONTROL LOCKS (BEECHCRAFT CORP) | 1 | |
| 50-590122-35 | CONTROL LOCKS (EFFECTIVITY: LJ-114 THRU LJ-1157; LW-1 AND AFTER) (BEECHCRAFT CORP) | 1 | |
| 50-590122-39 | LOCK ASSEM-CONTROL SURFACES | 2 | |
| 5001018-1 | TURBIN INLET CONTROL VALVE TEST KIT ATR72 | 1 | |
| 50188S0000 | HYDRAULIC CONTROL RIG | 1 | |
| 5102PVN3007ES | VALVE CONTROL | 1 | |
| 510HU | GOODRICH SENSOR SYSTEM INTERFACE CONTROL UNIT ICU | 1 | |
| 5120PL0802791 | POINTER FUEL CONTROL THROTTLE LEVER | 1 | |
| 5145-1-645145-1-75 | AUDIO CONTROL PANEL | 1 | |
| 51545-001B | DC GENERATOR CONTROL UNIT | 1 | |
| 51653-176TE | FIRE DETECTION CONTROL | 1 | |
| 518 | COAT THICKNESS CONTROLER | 1 | |
| 500000 | PPG Semco 500000 Semmatic Series 2200 Control Unit | 1 | |
| 501639 | FIXTURE – MANUAL ACTUATION, 501K HYDRO-MECHANICAL BLEED VALVE CONTROL | 2 | |
| 504304 | ENGINE CONTROL MODULE | 1 | |
| 518 PAINT BORER | COAT THICKNESS CONTROLLER | 1 | |
| 5180002-1 | FIXTURE-CONTROL SURFACE BAL. | 3 | |
| 5186 | TOOL, CONTROL OF CORRECT GEARING | 1 | |
| 5188 | TOOL, CONTROL OF CORRECT BEARING | 1 | |
| 518MC | COAT THICKNESS CONTROLLER | 2 | |
| 52183A0000-01 | PPU CONTROL BOX | 1 | |
| 522-2213-00 | RADIO SET CONTROL | 2 | |
| 522-3616-000 | DME CONTROL | 1 | |
| 522-4017-002 | PEDESTAL CONTROLLER | 1 | |
| 522099 | TIMER: DIGITAL,MULTI PROCESS CONTROL, | 2 | |
| 52359A0001-01 | CONTROL BLOCK | 1 | |
| 5261-1 | AUDIO CONTROL PANEL. | 1 | |
| 52658A8000-01 | TEST RIG CONTROL/CONTROL LOOPS | 1 | |
| 52985A94 | PRECISE-CONTROL SCREWDRIVERS | 1 | |
| 5324557 | WIRING HARNESS-ELECTRONIC ENGINE CONTROL | 1 | |
| 5324558 | WIRING HARNESS-ELECTRONIC ENGINE CONTROL | 1 | |
| 545SD | JACK - AXLE 30 TON 2 STAGE AIR (PNEUMATIC CONTROL) | 1 | |
| 5460A55 | STSTIC CONTROL PLIERS SET | 1 | |
| 5475601-1 | TEST SET,CONTROL | 6 | |
| 547SD | JACK MLG 50 T 2 STAGE AIR (PNEUMATIC CONTROL) | 1 | |
| 54843 | CONTROL SPEED | 1 | |
| 55-0814-09 | CONTROL CABLE ASSEMBLY | 1 | |
| 550T05655-403 | PIN SET, RIGGING (FLIGHT CONTROLS) | 1 | |
| 550T05656-251 | SOFTWARE,BACKLASH CALCULATION-CONTROL SURFACE/HS | 1 | |
| 5640-1 | AUDIO CONTROL | 2 | |
| 570-204 | Audio Control Test Panel | 1 | |
| 573-370 | SET - LOCKING CLAMP, CONTROL SURFACES | 1 | |
| 5750-ALL-1059 | CONTROL SURFACE ALIGNMENT CHK | 1 | |
| 5900 | OSCILLATOR, NONCRYSTAL CONTROLLED | 1 | |
| 579526 | GSE CONTROL BOARD 4400 | 1 | |
| 5807003 | FIXTURE CONTROL | 1 | |
| 5807003-000 | FIXTURE CONTROL | 1 | |
| 5916717-1 | Kit Rig Pins - Control Rigging | 4 | |
| 5916761-3 | CONTROL SURF. BAL. FIX. ASSY | 1 | |
| 5916761-507 | CONTROL SURF. BAL. FIX. ASSY. | 1 | |
| 5916773-509 | Blance kit-control surfaces tabs | 2 | |
| 5916773-511 | Balance Kit - Control Surface Tabs | 1 | |
| 5916776-1 | CONTROL SURFACE BALANCING KIT | 1 | |
| 5916776-507 | CONTROL SURFACE BALANCING KIT | 1 | |
| 5952169-29F | CONTROL RIG PIN R-24 | 1 | |
| 5952169-501 | Kit - Pins Control Rigging | 5 | |
| 5952169-503 | Kit-Pins, Control Rigging | 2 | |
| 5952169-505 | Kit-pins，control rigging | 3 | |
| 5954644-1 | TENSIONER CONTROL CABLE | 4 | |
| 5954644-503 | TENSIONER CONTROL CABLE | 5 | |
| 5954644-505 | TENSIONER CONTROL CABLE | 1 | |
| 5965694-1 | CONTROL FIXTURE PUSH PULL COL | 4 | |
| 5965694-501 | FIXTURE CONTROL COLU | 2 | |
| 5967001-100 | FS VALVE ASSY CONTROL ASSY | 1 | |
| 5YSSCKIT | FLIGHT CONTROL CABLES | 1 | |
| 6 | UNIT, RUDDER PEDAL / CONTROL COLUMN DAMPERS SERVIC | 1 | |
| 60-FCRK-1 | UPPER FLIGHT DECK CONTROL ROD TRAMMEL KIT | 1 | |
| 600-90800-2 | PULLEY FLIGHT CONTROL | 2 | |
| 600-90800-5 | PULLEY FLIGHT CONTROL | 2 | |
| 6000CS 3 X 4 1/4 | RIVETER/INSERTION TOOL COMPLETE WITH 3 WAY FOOT CONTROL, HOSES AND CONNECTORS AND NECESSARY HARDWARE. READY TO OPERATE. | 1 | |
| 6000CS 3 x 3 1/4 | Riveter/Insertion Tool Complete with 3 way foot control, hoses and connectors and necessary hardware. Ready to operate. | 1 | |
| 6000CS 3 x 4 1/4 | Riveter/Insertion Tool Complete with 3 way foot control, hoses and connectors and necessary hardware. Ready to operate. | 1 | |
| 6000CS 3 x 5 1/4 | Riveter/Insertion Tool Complete with 3 way foot control, hoses and connectors and necessary hardware. Ready to operate. | 1 | |
| 6000CS 6 x 3 1/2 | Riveter/Insertion Tool Complete with 3 way foot control, hoses and connectors and necessary hardware. Ready to operate. | 1 | |
| 6000CS 6 x 5 | Riveter/Insertion Tool Complete with 3 way foot control, hoses and connectors and necessary hardware. Ready to operate. | 1 | |
| 6000CS PU and Foot Control | 6000CS without yoke - power unit and foot control only. | 1 | |
| 60053A0000-01 | CONTROL BOX | 1 | |
| 6005KTQA1-103 | CONTROL UNIT - AIR DATA TEST SET, AUTOMATIC (MUST BE USED WITH VACUUM SOURCE OR PUMP UNIT 6201KTQ). | 1 | |
| 600634-04AG | VENTILATION CONTROLLER | 1 | |
| 6007045 | ANTISKID CONTROL UNIT | 1 | |
| 6007293-4 | ANTI-SKID CONTROL | 1 | |
| 601R43139-3 | UNIT, CONTROL, LAVATORY | 1 | |
| 601R86100-1 | STEERING CONTROL MODULE | 1 | |
| 6087.9255.03 | VHF COM CONTROL DISPLAY (CVC-152) | 1 | |
| 60B80031-8 | CONTROL UNIT | 1 | |
| 60G9127003A001 | PRIMARY FLIGHT CONTROL VALVE OVERRIDE PINS (2 EACH) | 1 | |
| 60P2423014Z002 | RAM AIR TURBINE CONTROL LOCKOUT PIN | 1 | |
| 60P2700001N001COF | CONTROL SURFACES BACKLASH MEASUREMENT TOOL | 1 | |
| 6110-00-631-7196 | CONTROL UNIT | 1 | |
| 6147CT000-024 | CONTROL TOOL | 1 | |
| 6147ES000-031 | CONTROL UNIT | 1 | |
| 617-1833-001 | ATTENDANT CONTROL UNIT TESTER | 1 | |
| 6199MT500-119 | ELECTRICAL CONTACT CONTROL | 1 | |
| 622-6520-007 | CTL 22 CONTROLLER | 1 | |
| 622-8111-006(HF9010) | UNIT CONTROL | 1 | |
| 627A160-B | FLAPERON CONTROL HANDLE SAFETY DEVICE | 1 | |
| 627A160-D | FLAPERON CONTROL HANDLE SAFETY DEVICE | 1 | |
| 627A250-A | CONTROL SURFACE LOADING DEVICE | 1 | |
| 628038-1 | TEMPERATURE CONTROL TESTER | 1 | |
| 6293B | Dill Air Controls 6293B 14 NPT Female Clip-On Air Chuck | 1 | |
| 63396754-2 | VALVE, ELECTRONIC FLOW CONTROL | 1 | |
| 63975 | 63975;Controller;Touchscreen Monitor w/M5 GUI | 1 | |
| 64-60-100 | CONTROL AND DISPLAY PANEL | 1 | |
| 647-4304-001 | POWER SOURCES WITH IEEE CONTROL | 1 | |
| 649-0911-001 | RECORDING CONTROL ADAPTER | 1 | |
| 6498A0000-01 | SERVO CONTROLE RUDDER | 2 | |
| 649A030-A | APU DAMPER ACTUATOR GROUND CONTROLLER APU | 1 | |
| 65-1202 | VIDEO CONTROLLER BOARD | 1 | |
| 65-90305-79 | APU FUEL CONTROL FILTER | 1 | |
| 65-90305-95 | APU FUEL CONTROL FILTER | 1 | |
| 6502FE137 | FLOW CONTROL ASSEMBLY | 1 | |
| 65678/24 | HUMIDITY CONTROLLER_DC 24 V | 1 | |
| 65679/24 | CONTROLLER-TEMP | 1 | |
| 65B05528-1 | BOEING-FLIGHT CONTROL BALANCING | 1 | |
| 65B82703-41 | MODULE FIRE CONTROL | 1 | |
| 65B96264-8 | CONTROL ASSY-PUSH-PULL THROT SYS FUEL | 1 | |
| 65C33722-71 | CONTROL ASSY-PUSH-PULL THROT SYS FUEL | 1 | |
| 662-0846-001 | TEST SET, FLIGHT CONTROL | 1 | |
| 6648 | CONTROL BOX | 1 | |
| 66790-1 | VALVE- HYD- FLAP-SLAT CONTROL- 757 | 4 | |
| 67400-12 | VHF COMM CONTROL PANEL | 1 | |
| 6743-00834-00 | PANEL PC CONTROL (ENGLAND) | 1 | |
| 675-10529 | CONTROL LEVER FIXTURE | 1 | |
| 67622-101 | ACTUATOR CONTROL UNIT ASSEMBLY | 1 | |
| 67662-102 | ADF CONTROL UNIT | 1 | |
| 6778B010002 | CONTROL VALVE-SHUT OFF | 1 | |
| 679774 | FUEL CONTROL CUTOFF ROD SETTING FICTURE | 1 | |
| 6796446 | Check Fixture- Propeller Control Linkage | 1 | |
| 6796568 | ADAPTER - TORQUE, COORDINATOR CONTROL SHAFT | 2 | |
| 6796658 | POINTER - FUEL CONTROL THROTTLE LEVER | 3 | |
| 6796698 | FIXTURE -HOLDING, FUEL CONTROL | 2 | |
| 6796708 | FICTURE CHECKING PROPELLER CONTROL LINKAGE | 3 | |
| 6796757 | PIN - RIGGING, PROPELLER CONTROL LINKAGE | 3 | |
| 6796941-14 | GUIDE-FUEL PUMP/ FUEL CONTROL ACCESSORY DRIVE, GOVERNOR, AND STARTER | 1 | |
| 6796941-201 | PULLER-SEAL, FUEL PUMP/ FUEL CONTROL ACCESSORY DRIVE, GOVERNOR, AND STARTER | 3 | |
| 6796966 | PLIERS RETAINING RING FUEL CONTROL DRIVE BEARING | 2 | |
| 6797197 | SETTING FIXTURE - FUEL CONTROL | 1 | |
| 6797313 | ADAPTER TORQUE CO-ORDINATOR CONTROL SHAFT | 1 | |
| 6797397 | POINTER,FUEL CONTROL THROTILE | 1 | |
| 6798033 | Test Stand â Can Be Combined For Testing Gas Turbine Fuel Control And Fuel Pump | 2 | |
| 6798233 | TEMP DATUM CONTROL TEST SET | 7 | |
| 6798233K | TD CONTROL SYSTEM | 1 | |
| 6798233L | TEMP DATUM CONTROL TEST SET | 1 | |
| 6798233M | TEMPERATURE DATUM CONTROL SET | 1 | |
| 6798248 | WRENCH - FUEL CONTROL MOUNTING NUT | 1 | |
| 6798292-B | HINGED WRENCH WITH 5/16 BOX END FUEL CONTROL REMOVAL | 1 | |
| 6798804 | PULLER, SPEED SENSITIVE CONTROL OIL SEAL | 2 | |
| 6799217-200 | DATUM CONTROL POWER CABLE | 4 | |
| 6799538 | WRENCH BOX SPEED SENSITIVE CONTROL SWITCH | 2 | |
| 6799539 | SPEED SENSITIVE CONTROL SPANNER | 1 | |
| 6799596 | FDCTURE, INSTALLATION, SPEED SENSITIVE CONTROL SEAL | 2 | |
| 68000-144-1 | CONTROL BENCH2ND LINE | 1 | |
| 68000-152-1 | CONTROL BENCH | 1 | |
| 682003008 GCEU/6 | RAT CONTROL UNIT | 1 | |
| 6821480 | SPEED SENSITIVE CONTROL | 1 | |
| 68284-1 | FOOT CONTROL | 1 | |
| 6872546 | BLEED VALVE CONTROL FIXTURE GAUGE | 2 | |
| 6893372 | STAND - TEST, FUEL CONTROL | 1 | |
| 6893508 | PUSHER-CONTROL/ PUMP SEAL | 4 | |
| 6897010 | AUTOMATIC WELDING LATHE HOLDS AND CONTROLS ROTATION OF COMPONENTS DURING WELDING PROCEDURES. | 1 | |
| 6897859 | TEST SET N2 OVERSPEED CONTROL | 1 | |
| 63910365 | CONTROLLER, STEPPER MOTOR | 1 | |
| 595216925 | CONTROL RIG PIN 6-5 | 4 | |
| 663007005 | PITCH CONTROL UNIT | 1 | |
| 666000143 | PROPELLER ELECTRONIC CONTROLLER | 1 | |
| 682003008 | CONTROL UNIT - RAT | 10 | |
| 5972266001 | CONTROL BOX EDU | 1 | |
| 69-37335-2132 | FUEL SYSTEM CONTROL MODULE P5-2 | 1 | |
| 690-419169 | CONTROL GAUGE 85 | 1 | |
| 690-433177 | CONTROL GAUGE 90.5 | 1 | |
| 69001074-050 | EXTENDED HANDHELD (CONTROL TOOL | 1 | |
| 69001074-060 | REMOTE CONTROL RADIO DEVICE,HA | 8 | |
| 69001074-070 | EXTENDED HANDHELD (CONTROL TOOL | 2 | |
| 69001074-080 | EXTENDED HANDHELD (CONTROL TOOL | 3 | |
| 690419169 | CONTROL GAUGE | 1 | |
| 690433177 | CONTROL GAUGE | 1 | |
| 690500-08 | CONTROL UNIT | 1 | |
| 6910T23G02 | KIT ENGINE CONTROL R/H | 1 | |
| 6910T24G02 | KIT ENGINE CONTROL L/H | 1 | |
| 692-419169 | CONTROL GAUGE 90.5 | 1 | |
| 692-438921 | CONTROL BOX | 1 | |
| 692419169 | CONTROL GAUGE | 1 | |
| 697395-1 | VALVULA DUAL BRAKE CONTROL | 1 | |
| 6980T104 | STATIC CONTROL WORK SURFACE MAT, BLUE, 48" LONG X 36" WIDE | 1 | |
| 699009003 | TIMER MONITOR CONTROL UNIT | 1 | |
| 699018004 | PROPELLER ELECTRONIC CONTROL | 1 | |
| 6F2591G00132 | RESCUE HOIST OPERATOR CONTROL PANEL ADAPTER | 1 | |
| 6F6230F01531 | M/R PITCH CONTROL ADJUST TOOL | 1 | |
| 6F6230G01531 | TOOL, M/R PITCH CONTROL LINK ADJUST | 1 | |
| 6F6430G00131 | TOOL, T/R PITCH CONTROL LINK ADJUST | 1 | |
| 6F6430G07831 | TOOL, EP TR PITCH CONTROL LINK ADJUST | 1 | |
| 6F6522G00231 | T/R PITCH CONTROL LINK ADJUST FOR HC EQUIPPED WITH KIT ENHANCED PERFORMANCE. | 1 | |
| 6F6700G00133 | M/R ROTATING CONTROLS ADJUSTING (KIT) | 1 | |
| 6F6700G02531 | T/R ROTATING CONTROL ADJUST | 1 | |
| 6F6700G05631 | FIXED FLIGHT CONTROL ADJUST | 1 | |
| 6F6700G07431 | TOOL KIT, EP FIXED FLIGHT CONTROLS ADJUST | 1 | |
| 6F6700G16131 | TOOL KIT, EP ROTATING CONTROLS ADJUST | 1 | |
| 6SF3508-27-65I | SPOILER CONTROL TESTER | 1 | |
| 6SF4058-27-00I | 737 RIG PIN FLIGHT CONTROL | 1 | |
| 6SF4058-510 | RIG STRUT DRUM CONTROL PIN | 1 | |
| 7-262100003-611 | KIT, RIGGING, CONTROL | 1 | |
| 7-562100022-601 | ALARM CONTROL UNIT TEST LEAD | 1 | |
| 70-0180-3 | CONTROL ASSY-DIMMER | 1 | |
| 70-0276-1 | CURRENT CONTROL | 1 | |
| 700-24100-1-SFIX L.H. | RIGGING TOOL - ELEVATOR CONTROL SURFACE L/H | 2 | |
| 700-24100-1-SFIX-LH | RIGGING TOOL, ELEVATOR CONTROL SURFACE | 2 | |
| 700-24100-2-SFIX R.H. | RIGGING TOOL - ELEVATOR CONTROL SURFACE R/H | 1 | |
| 700-24100-2-SFIX-RH | TOOL, ELEVATOR CONTROL(RH) | 1 | |
| 7000042715 | 3M 051131-16573 Accuspray Air Flow Control Valve | 1 | |
| 700100-7 | BOX-CARGO CONTROL | 1 | |
| 700100-9 | BOX-CARGO CONTROL | 1 | |
| 7004213-313SPEX | CONTROLLER | 1 | |
| 7007062-987 | CONTROLLER-MFD | 1 | |
| 7007188-901 | CONTROL PANEL EXTENDER BOARDS | 1 | |
| 700TEF034 | CONTROL BOX TEST FIXTURE | 1 | |
| 7010 | Precision Pressure Indicator / Controller | 1 | |
| 7012290-901 | CONTROL PANEL | 1 | |
| 7012290-903 | CONTROL PANEL | 1 | |
| 7012290-907 | CONTROL PANEL | 1 | |
| 7016683-966 | CONTROLLER DC-840 | 1 | |
| 7025725-941 | MULTIPURPOSE CONTROL & DISPLAY UNIT | 1 | |
| 70323-1 | CONTROL UNIT TEMPRATURE | 1 | |
| 703A94-2790-00 | SHIM, TEST BINDING SERVO-CONTROL | 1 | |
| 703A94-3200-00 | STEADYCONTROL ASSEMBLY | 1 | |
| 703A94-3200-01 | STEADY CONTROL | 1 | |
| 703A94-3200-30 | EQUIPPED FITTING, STEADY CONTROL | 1 | |
| 703A94-3201-30 | EQUIPPED FITTING, STEADY CONTROL | 1 | |
| 703A94-3400-01 | STEADY CONTROL | 1 | |
| 703A943200-01 | STEADY CONTROL | 1 | |
| 703A94320001 | STEADY CONTROL | 1 | |
| 703A94‐3200‐02 | CASE STEADYCONTROL,KIT | 1 | |
| 703А94-3200-01 | STEADY CONTROL | 1 | |
| 7040-13 | ELECTRONIC CONTROL MODULE | 1 | |
| 7040-15 | ELECTRONIC CONTROL MODULE | 1 | |
| 70400-1 | UNIT LOGIC CONTROL | 1 | |
| 7043T-W | TEMPERATURE CONTROL | 1 | |
| 704A43210009 | CONTROL UNIT INTERFACE ENGINE | 1 | |
| 704A44831091 | SERVO CONTROL | 1 | |
| 704A45751216 | CONTROL BOX EDU | 1 | |
| 7055A010002 | TEMPERATURE CONTROL VALVE | 1 | |
| 706100-1 | OPERATOR PANEL CONTROL | 1 | |
| 707 | SAFE HEET Temp. Controller | 2 | |
| 70700-20389-043 | KIT, FLIGHT CONTROL RIGGING | 1 | |
| 70700-77205-041 | FLIGHT CONTROL RIGGING KIT | 1 | |
| 70700-86551-041 | S-70I GENERATOR CONTROL UNIT BREAKOUT BOX | 1 | |
| 70BMA01010 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMA01050 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMA01060 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMA01070 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMB01020 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMB01030 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMB01030-N | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMC01000 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMC01030 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMD01010 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMD01030 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMF11000 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMG01000 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMH11000 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMJ01020 | ELECTRONIC CONTROL UNIT (ECU) | 1 | |
| 70BMJ01030 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMK01000 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMK01010 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70BMK01020 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMN01040 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMN01050 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMN01060 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMP01010 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMP01050 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMQ01000 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMQ01020 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMR00010 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70BMR01000 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70CMG11000 | DIGITAL ENGINE CONTROL UNIT -DECU- | 1 | |
| 70CMK01010 | ELECTRONIC CONTROL UNIT | 1 | |
| 70CMK01020 | DIGITAL ENGINE CONTROL UNIT | 2 | |
| 70CMK11010 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70EMF01100 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMF01120 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMF01170 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMF01270 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMF01280 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMH01050 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMK01040 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EML01070 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EML01090 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMM01060 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMM01080 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMM01100 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMM01110 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMM11010 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMM11020 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMM21010 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMP01040 | ELECTRONIC CONTROL UNIT | 1 | |
| 70EMR01000 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70EMR11000 | DIGITAL ENGINE CONTROL UNIT | 1 | |
| 70EMS01000 | ELECTRONIC CONTROL UNIT | 1 | |
| 70EMS01020 | ELECTRONIC CONTROL UNIT | 1 | |
| 70PMB01000 | ELECTRONIC CONTROL UNIT | 1 | |
| 70QMA01000 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70QMA01010 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70RMA01000 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 70RMA01010 | ENGINE ELECTRONIC CONTROL UNIT | 1 | |
| 71-D10-1025 | UNIT CONTROL TRIM EN | 1 | |
| 71-D10-1225 | UNIT CONTROL TRIM EN | 1 | |
| 710-315-01350 | CONTROL DEVICE FOR FLUIDS | 1 | |
| 710-315-01400 | CONTROL DEVICE FOR FLUIDS | 1 | |
| 712020-1 | MANIFOLD SET-CONTROL,JACKING AIRCRAFT | 1 | |
| 713100-1 | CARGO CONTROL BOX ASSY | 1 | |
| 714100-1 | PANEL ASSY-CONTROL | 1 | |
| 714E-3 | PANEL HF CONTROL | 3 | |
| 714E-2 | PANEL HF CONTROLE | 2 | |
| 714E1 | RADIO CONTROL | 1 | |
| 714E2 | RADIO CONTROL | 2 | |
| 714E3 | RADIO CONTROL | 3 | |
| 714223 | EXTRACTOR FILTER - RUDDER SERVO CONTROL | 1 | |
| 71310001 | ADAPTER FOR DEFLATION OF THE TIRE USED WITH LARGE BORE VALVE. (V39BV2) DILL AIR CONTROL | 1 | |
| 71700-77551-041 | TEST SET, ACTIVE VIBRATION CONTROL SYSTEM | 1 | |
| 717901-5 | HANDLE ASSY-LG CONTROL | 1 | |
| 720320-02-42-00 | OVEN CONTROL MODULE 2000 | 1 | |
| 72038000 | OVEN CONTROL MODULE 800 | 1 | |
| 720846D | CONTROL UNIT-GENERATOR | 2 | |
| 72555K66 | GROUND STATION FOR STATIC CONTROL CORDS | 1 | |
| 72555K72 | STATIC CONTROL WRIST STRAP TESTERS | 1 | |
| 727180 | CONTROL ELECTRONIC BOX | 1 | |
| 72P2131001N001 | CABIN PRESSURE CONTROL SYSTEM TEST SET | 1 | |
| 72P2500002Z023 | TOUCH SCREEN CONTROLLER COVER | 1 | |
| 72P2700001N001COF | CONTROL SURFACE BACKLASH MEASUREMENT TOOL | 1 | |
| 731-688 | ELECTRONIC FUEL CONTROL TEST | 1 | |
| 7310 | High Pressure Pneumatic Controller / Test Set | 7 | |
| 728285 | SERVO CONTROL CASING | 1 | |
| 732173 | POWER CONTROL CARD | 1 | |
| 734-60987 | DIRECTIONAL CONTROL VALVE TEST FIXTURE (EQUIVALENT TO 737-11190) | 1 | |
| 734-92711 | CAP, DIRECTIONAL CONTROL VALVE (EQUIVALENT TO 737-38333) | 1 | |
| 734-93075 | DC CONTROL PANEL | 1 | |
| 734285C | BUS CONTROL PANEL B767 | 1 | |
| 7511900-90302 | PANEL, AUDIO CONTROL NO. 1 | 1 | |
| 7531-400-901-001 | Frame, Control Panel | 1 | |
| 7610 | High Pressure Hydraulic Controller / Test Set | 1 | |
| 748500 | TRAILER,GND HANDLING:MHU-141/M,4 WHEEL AIR ARMAMENT CENTER/ EN DRS TRAINING & CONTROL SYSTEMS, LLC | 1 | |
| 762-15385 | ANTENNA CONTROL UNIT (ACU) | 1 | |
| 762187F | BUS POWER CONTROL UNIT | 1 | |
| 763485 | OVERLAY, CONTROL PANEL | 9 | |
| 76502959 | SHOP EQUIPMENT/AIRCRAFT FIRE CONTROL | 1 | |
| 766665-1 | PROPELLER CONTROL | 1 | |
| 76E0400-3 | COMPRESSOR CONTROL SPRAYING UNIT | 1 | |
| 76E04000-30A | SPRAYING UNIT, JET AIRCRAFT ENGINES CORROSION CONTROL | 2 | |
| 76H05000 | TRAILER,GND HANDLING:MHU-141/M,4 WHEEL AIR ARMAMENT CENTER/ EN DRS TRAINING & CONTROL SYSTEMS, LLC | 1 | |
| 771-563-9101 | CONTROL BLEED AIR VALVE | 1 | |
| 77144-T6 | ADAPTER - TORQUE, AUTO BRAKE PRESSURE CONTROL MODULE FILTER | 1 | |
| 77144-T6PM | ADAPTER - TORQUE, AUTO BRAKE PRESSURE CONTROL MODULE FILTER | 1 | |
| 775/50 | SCREWDRIVER - TORQUE CONTROL 100 - 500 CN M (9 - 4 | 1 | |
| 776902-3 | DUAL TEMP CONTROL VALVE | 1 | |
| 779-9459-005 | POWER CONTROL PANEL | 1 | |
| 780-1000-001-CF0095-M25 | CONTROL,INTERCOMMUNICATION SET | 1 | |
| 787-6842-001 | TEST CONTROL | 1 | |
| 7890992-021 | INERTIAL COMPUTER CONTROL CONSOLE | 1 | |
| 7890994-031 | CONTROL UNIT TESTER | 1 | |
| 789714-4 | CONTROLLER, WINDSHIELD TEMP | 1 | |
| 79000289-1 | CONTROL ORIFICE | 1 | |
| 790424-4 | VALVE STARTER CONTROL | 1 | |
| 792755-A | PRESSURE CONTROLLER | 1 | |
| 796884-2-009 | CABIN PRESSURE CONTROLLER | 1 | |
| 799 | REMOTE CONTROL POWER | 3 | |
| 799-1 | CONTROL BOX X1.202 | 1 | |
| 7C367 | ELECTRICAL CONTROL ACTUATOR TESTER ALTERNATE 1318 | 1 | |
| 7SJ50-6875 | FLAP & SPOILER CONTROL VALVE | 1 | |
| 8.60136E 14 | TEST SET - LANDING GEAR SAFETY RELAY CONTROL SIMULATOR | 1 | |
| 80000-04-01020301 | PMAT 2000 - SPECIAL LAPTOP P/N 80000-04-01020301 (TELEDYNE CONTROLS/ DEMO SYSTEMS DIVISION) | 1 | |
| 8000CS 6 x 5 | Riveter Tool, complete with foot control, hoses and connectors and hardware. Ready to operate. | 1 | |
| 8000CS 6 x 8 | Riveter Tool, complete with foot control, hoses and connectors and hardware. Ready to operate. | 1 | |
| 8000CSA 12 1/2 X 3 | RIVETER/INSERTION TOOL, COMPLETE WITH FOOT CONTROL, HOSES, CONNECTORS, STANDARD ACCESSORIES GROUP AND HARDWARE. READY TO OPERATE. NOTE: DOES NOT INCLUDE PEDESTAL STAND. | 1 | |
| 8000CSA 12 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8000CSA 24 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8000CSA 9 1/2 x 3 | Riveter/Insertion tool, complete with foot control, hoses, connectors, standard accessories group and hardware. Ready to operate. NOTE: Does NOT include pedestal stand. | 1 | |
| 8001-00-4 | CONTROL BOX | 1 | |
| 80049-66 | ASSEMBLY - LOCK, FLIGHT CONTROLS | 1 | |
| 80079-1 | ETHERNET ADAPTOR (TELEDYNE CONTROLS CABLE) | 2 | |
| 8008-1 | PMAT CONTROL CABLE | 1 | |
| 800W064500 | EN-OUTILLAGE DE CONTROLE | 1 | |
| 800W200900 | FLOW AND JET DIRECTION CONTROL TOOL | 1 | |
| 800W210200 | SEALING CONTROL TOOL | 1 | |
| 801000-3 | MAIN ENGINE CONTROL | 6 | |
| 8011529-508 | CONTROL TOOL FOR THE LINK ASSEMBLY | 1 | |
| 8011532-508 | LINK CONTROL TOOL | 1 | |
| 8011533-508 | DRIVE GEAR-SHAFT CONTROLT OOL | 1 | |
| 802730-S70-1-2 | LEAKAGE CONTROL TOOL | 1 | |
| 805332-011 | CONTROL BOX IFF 2743 | 1 | |
| 805332/003 | IFF 2743 Transponder Control Unit | 1 | |
| 8072827-0501 | CONTROL CABLE ASSEMBLY | 1 | |
| 80E295T250 | CABLE CONTROL | 1 | |
| 81-1A | REMOTE CONTROL PANEL | 1 | |
| 8106-90A | CONTROL REGULATOR 8202A | 1 | |
| 81102FE13400060 | CONTROL TOOL | 1 | |
| 81403FE38070500 | SWITCHES POSITION CONTROL TOOL | 1 | |
| 81403FE38071000 | SWITCHES POSITION CONTROL TOOL | 1 | |
| 81412FE380190 | IRREVERSIBILITY CONTROL TOOL | 1 | |
| 81504-FE15106001 | CONTROL AXIS | 1 | |
| 816101-4 | CONTROLLER-TEMPERATURE | 1 | |
| 816624-3T1 | FAN-AIR CONTROL THERMOSTAT ADJUSTMENT TOOL | 1 | |
| 81700ST1-015003 | ADJ. GAUGE SEAT CONTROL LEVERS | 15 | |
| 81700STI-015003 | CONTROL ADJUSTMENT TOOL | 1 | |
| 820-033-W16E | DIS CONTROL PROPE | 1 | |
| 82046-5 | CONTROLR-ADG AUTO DEPLOY | 1 | |
| 82165-18 | MULTIFUNCTION CONTROL DISPLAY UNIT GPS HT | 1 | |
| 82165-20 | MULTI-PURPOSE CONTROL DISPLAY TYPE III | 1 | |
| 822-1121-001 | CONTROL COMM / NAV TUNING / RP/OH | 1 | |
| 822-1261-101 | FLIGHT CONTROL COMP. | 1 | |
| 822-1277-001 | CONTROL COMM / NAV TUNING / RP/OH | 1 | |
| 822-1485-606 | CONTROL DISPLAY UNIT (CDU-6200) | 1 | |
| 822-1567-101 | MODE CONTROL PANEL | 1 | |
| 822-1807-001 | TRANSPONDER CONTROL, | 1 | |
| 822-2333-001 | DISPLAY CONTROL PANEL (DCP-6200) | 1 | |
| 82202-20506 | TORQUE MEASURING TOOL-SWIVEL CONTROL FIXTURE | 1 | |
| 824972-7-020 | ELECTRONIC ENGINE CONTROL | 1 | |
| 825307-1-201 | CONTROLLER: TEST UNIT,AIR SUPPLY, | 1 | |
| 82602FE380190 | LEAKAGE CONTROL TOOL | 1 | |
| 82901FE380190 | CONTROL TOOL | 1 | |
| 830-7754-001 | CONTROL BOX ASSEMBLY | 1 | |
| 830-7934-001 | BLOWER CONTROL CIRCUIT CARD TEST FIXTURE | 1 | |
| 830006-809-00088 | TAIL ROTOR PITCH CONTROL STAKING TOOL "C & D" MODEL | 1 | |
| 833064-3 | TORQUE MOTOR AND SOLENOID CONTROLLER | 1 | |
| 833066 | 1OFF STIMULATOR CONTROL | 1 | |
| 833274-1 | WRENCH - ADJUSTER, FUEL CONTROL GOVERNOR - GTCP85-129H/J/K | 2 | |
| 833275-1 | WRENCH - JAMNUT, FUEL CONTROL GOVERNOR - GTCP85-129H/J/K - 737-100/200/300/400/500 | 1 | |
| 83366 | 83366;390XOPT206 P25 Control Channel Logger Option; Requires Opt200 | 1 | |
| 833663-1 | CDU ACTUATOR PNEUMATIC CONTROL STAND | 1 | |
| 83372 | 83372;390XOPT215 Secondary Control Channel Broadcast Message; Requires Opt201 | 1 | |
| 833844-1 | ELECTRICAL CONTROL BOX | 1 | |
| 834273-1 | FUEL CONTROL TEST STAND ADAPTOR | 1 | |
| 834411-1 | FUEL CONTROL STAND ASSEMBLY | 1 | |
| 834520-1 | ELECTRONIC CONTROL UNIT | 1 | |
| 834612-1 | FUEL CONTROL STAND ASSEMBLY | 1 | |
| 835640-2 | LVDT CIOSED LOOP CONTROL BOX (ALTERNATE) | 1 | |
| 84-16 | MOTORS CONTROL BENCH | 1 | |
| 8420B1-201 | CONTROLLER ASSY-LCD | 1 | |
| 8420B1-401 | CONTROLLER ASSY-LCD | 1 | |
| 84354450 | RCCB-REMOTE CONTROL CIRCUIT BREAKER | 1 | |
| 843RIG7 | DC CONTROL PANEL. | 1 | |
| 852D102/02 | CONTROL CONSOLE | 1 | |
| 85301FE196001 | CONTROL BOX | 1 | |
| 855275-427 | CONTROL PANEL-LHREMOTEMECH | 1 | |
| 855275-428 | CONTROL PANEL-RH | 1 | |
| 856A1175 | SENSOR - TEMPERATURE - TURBINE CLEARANCE CONTROL VALVE (TYPE K) | 1 | |
| 856A1175G02 | RESISTOR, THERMALTOOL(TEMP. SENSOR FOR TURBINE CLEARANCE CONTROL VALVE) | 4 | |
| 856A1217 | REMOTE TRIMMER (TRIMMER ONLY / CONTROL BOX AND HARNESS SOLD SEPARATELY) | 1 | |
| 856A1273G01 | PRESASURE CONTROLLER | 1 | |
| 856A1303G01 | WRENCH TOOLREMOVAL MAINENG.CONTROL/FUELP | 1 | |
| 856A1336 | ADAPTER SET, TORQUE-MAIN ENG. CONTROL FASTENERS | 5 | |
| 856A1336 REV C | ADAPTER SET, TORQUE-MAIN ENG. CONTROL FASTENERS | 1 | |
| 856A1366G05 | CASE ASSY, RESISTANCE TESTER-PWR MGMT CONTROL SYSTEM | 1 | |
| 856A1366G06 | CASE ASSY, RESISTANCE TESTER-PWR MGMT CONTROL SYSTEM | 1 | |
| 856A1366G07 | CASE ASSY, RESISTANCE TESTER-PWR MGMT CONTROL SYSTEM | 1 | |
| 856A1366G08 | CASE ASSY, RESISTANCE TESTER-PWR MGMT CONTROL SYSTEM | 1 | |
| 856A1450P01 | Motor Drive Turning Tool- Foot Control | 1 | |
| 856A1450P02 | Motor Drive Turning Tool - Hand Control | 1 | |
| 856A1469 | WRENCH SET, RUN ON/OFF MAIN ENG. CONTROL/FUEL PUMP UNIT | 4 | |
| 856A1469 REV F | WRENCH SET, RUN ON/OFF MAIN ENG. CONTROL/FUEL PUMP UNIT | 1 | |
| 856A1469G01 | WRENCH SET REM MEC/FUEL PUMP NUT (CONTROL TOOL)) | 21 | |
| 856A1469G02 | SPECIAL TOOL (RUNOFF/ON) MAIN CONTROL | 15 | |
| 856A1480G01 | CFM56-5 Engine Preservation Control Box | 13 | |
| 856A1480G01-IAS | CFM56-5/7 Engine Preservation Control Box | 1 | |
| 856A1488P01 | TOOL SET MOTOR-BORESCOPING (FOOT CONTROLLED AIR MOTOR, STARTER DRIVE PAD | 1 | |
| 856A2002P02 | Tool Set Motor For Borescope Hand Control | 1 | |
| 856A2310G02 | WRENCH, RATCHET, DUAL PURPOSE - VBV MANUAL CONTROL (RATCHET WRENCH) | 10 | |
| 856A2310G03 | WRENCH, RATCHET, DUAL PURPOSE - VBV MANUAL CONTROL (RATCHET WRENCH) | 1 | |
| 856A2501 | WRENCH-VBV MANUAL CONTROL | 5 | |
| 856A2501 G01 | Wrench Ratchet Dual Purpose VBV Manual Control | 27 | |
| 856A2501G01 | WRENCH VBV MANUAL CONTROL | 27 | |
| 856A2623 | WHEEL ROTATION CONTROL LPTR | 1 | |
| 856A2623G01 | WHEEL ROTATION CONTROL LPTR | 3 | |
| 856A2792 | PULLER - CONTROL ALTERNATOR BEARING HOUSING AND GEARSHAFT ASSEMBLY (PULLER) | 1 | |
| 856A2792G01 | PULLER- CONTROL ALTERNATOR BEARING HOUSING & GEARSHAFT ASSY | 5 | |
| 856A3234P01 | Protractor Control Vent | 15 | |
| 856A3317P02 | CABLE DE CONTRÔLE T49,5 CFM56 | 5 | |
| 856A3318P02 | CABLE DE CONTROLE T49,5 CFM56 | 5 | |
| 856A3409 | PINS GUIDE SPINNER (CONTROL TOOL) | 7 | |
| 856A3409G01 | 856A3409 (PINS GUIDE SPINNER (CONTROL TOOL)) | 30 | |
| 856A3598G03 | REMOVAL/INSTALLATION FUEL PUMP/MAIN ENGINE CONTROL | 18 | |
| 856A5940G01 | RESISTIVE ELEMENT HEATER CONTROLLER | 2 | |
| 856A9035G01 | BOX CONTROL | 1 | |
| 85JA8234-001 | APS CONTROLLER INTERFACE CABLE | 1 | |
| 85JA8983-001 | ECS CONTROLLER INTERFACE CABLE | 1 | |
| 86-01-35400 | TEST BENCH-FOR MASTER WARNING CONTROLLER | 1 | |
| 86008 | CONTROL LUG (PRECILEC) | 1 | |
| 860D100-18 | UNIT, FLAP CONTROL | 1 | |
| 86153 | 86153;PCBA;Fan Control Interface | 2 | |
| 86201A27912900 | CONTROL TEST BENCH | 1 | |
| 8644-C-000002-FAB | PLATE CONTROL SS FIN | 1 | |
| 86539A4254000 | QUADRANT GRADUATED THROTTLE THRUST REVERSER CONTROL | 1 | |
| 866-0018-030 | AUDIO CONTROL PANEL | 1 | |
| 879B | LOOP CONTROLLER | 6 | |
| 87V | STRAP -ADJUSTABLE WRIST,CONDUCTIVE,STATIC CONTROL | 3 | |
| 88071A010002 | CONTROL VALVE-OUTFLOW | 1 | |
| 88364-002 | CARD EXTENDER, MOTOR CONTROL | 1 | |
| 8844 | Dill Air Controls 8844 Self-Contained (0-400 PSI) Aircraft Tire Pressure Gauge | 9 | |
| 8844-B | Dill Air Controls 8844-B Aircraft (0-400 PSI) Tire Pressure Gauge | 6 | |
| 8860R | Dill Air Controls 8860R Hose & Chuck Assembly | 3 | |
| 8885 | Dill Air Controls 8885 Commercial Aircraft (0-200 PSI) Tire Pressure Gauge | 1 | |
| 8921 | Dill Air Controls 8921 High Pressure Strut Coupler - 18 NPT Hose Connector - 3,000 PSIG | 4 | |
| 8927 | Dill Air Controls 8927 High Pressure Strut Coupler - .375-24 Hose Connector - 3,000 PSIG | 4 | |
| 895-3101-05-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 1 | |
| 895-3101-05-101 | WRENCH SET, FLIGHT CONTROL SERVOACTUATOR CLUTCH ADJUSTMENT GF-82-00 | 1 | |
| 8C3276 | CONTROL SET - UNISON RING - FHF | 1 | |
| 8C3281 | CONTROL SET - FLOW CHECK - CARBON SEAL - BGR NO.3 | 1 | |
| 8G6230G00131 | TOOL,M/R PITCH CONTROL LINK ADJUST | 1 | |
| 8G6430G00131 | TOOL,T/R PITCH CONTROL LINK ADJUST | 1 | |
| 8G6700G00132 | TOOL KIT, M/R ROTATING CONTROLS ADJUSTING | 1 | |
| 8G6700G02732 | TOOL KIT, T/R ROTATING CONTROLS ADJUSTING | 1 | |
| 8G6700G05531 | FLIGHT CONTROL ADJUST TOOL | 1 | |
| 8TC19AAH1 | THERMOCOUPLE, HPT CLEARANCE CONTROL | 6 | |
| 9(19739) | AIR CONTROL CABLE | 1 | |
| 9.92003E 14 | CONTROL UNIT TO EXAMINE THE ACTUATOR WHEN THE BOTTOM IS REMOVED | 1 | |
| 90080100-001 | TESTER REFUELLING NOZZLE CONTROLLER | 2 | |
| 901018-1 | CABIN PRESSURE CONTROL TEST | 1 | |
| 901018-2 | CABIN PRESSURE CONTROL TEST | 1 | |
| 9022.1 | KNOB, CONTROL (MEGAPHONE). | 1 | |
| 9038 | Dill Air Controls 9038 14 NPT Female Large Bore Clip-On Air Chuck | 1 | |
| 9043 | Dill Air Controls 9043 Standard Bore High Pressure Strut Coupler - .375-24 Hose Connector - 3,000 PSIG | 3 | |
| 90411 | PCI MULTIPORT CONTROLLER CARD PCI-410 | 1 | |
| 90533 | 90533;390XOPT422 dPMR Control Channel Logger Option; Requires Opt420 | 1 | |
| 900041 | PNEUMATIC CONTROL PANEL CONTROLLER | 1 | |
| 9036851 | CONTROLLER INTERFACE BOARD | 1 | |
| 86690158 | TEST SET AND CABLE, AE 3007 ENGINE SIGNAL, CONTROL DATA SYSTEMS | 1 | |
| 905244-1 | CONTROL RIGGING KIT | 1 | |
| 905496-2-2 | ELECTRONIC CONTROL UNIT SET | 1 | |
| 905496-3-1 | ELECTRONIC CONTROL UNIT TEST SET | 1 | |
| 9059129-204 | UNISON CONTROL LEADS | 1 | |
| 9059129-313H | UNISON CONTROL LEADS | 1 | |
| 906-10246-3 | BAE SYSTEMS CONTROLS LOOP RESISTANCE TESTER (LRT) | 17 | |
| 906-10247-1 | CONTROLS CABLE /LOOP RESISTANCE TESTER (BAE SYSTEMS) | 1 | |
| 906-10247-2 | DESCRIPTION BAE SYSTEMS CONTROLS CABLE/LOOP RESISTANCE TESTERS | 1 | |
| 906-10247-3 | BAE Systems Controls Loop Resistance Tester (LRT) | 10 | |
| 906-10260-12 | BAE SYSTEMS CONTROLS CABLE ASSY-SENSE DRIVE | 1 | |
| 906-10260-13 | BAE SYSTEMS CONTROLS CABLE ASSY-SENSE DRIVE (BLUE) | 1 | |
| 906-10260-14 | BAE SYSTEMS CONTROLS CABLE ASSY-SENSE DRIVE (RED) | 1 | |
| 906-10271-3 | BAE SYSTEMS CONTROLS LOOP ACCESSORY TESTER KIT | 4 | |
| 906-10281-1 | BAE SYSTEMS CONTROLS JUMPER CABLE KIT | 7 | |
| 9061 | ADAPTER FOR DEFLATION OF THE TIRE USED WITH LARGE BORE VALVE. (V39BV2) DILL AIR CONTROL | 4 | |
| 90C400SLN | UNIT - ELECTRICAL GROUND POWER (90 KVA) SOLID STATE CONTROL DIESEL LOW NOISE - CUMMINS DIESEL ENGINE | 1 | |
| 9101-020000 | AERO CONTROLEX OZONE DISENFECTION CARD | 1 | |
| 91117B020301 | CONTROLLER-AIR SYSTEM | 1 | |
| 914019-1 | ANTENNA CONTROL PCB (CCA) | 1 | |
| 915-18205 | AIRCRAFT VIBRATION ANALYSIS AND CONTROL EQUIPMENT, CHADWICK VXP | 1 | |
| 916392-3-1 | Digital Cabin Pressure Control System Tester | 1 | |
| 91952 | HYDRAULIC CONTROL UNIT, STROKE : 50 MM (FOR CFD GUN) | 1 | |
| 92086A01 | CONTROL BOX | 1 | |
| 92087A010101 | TEST CONTROL BOX | 1 | |
| 9240 | LOOP CONTROLLER | 1 | |
| 9240-SI | LOOP CONTROLLER | 14 | |
| 9240-SI-1 | LOOP CONTROLLER LEAD (CABLE) | 1 | |
| 924051 | LOOP CONTROLLER | 1 | |
| 9240S1 | LOOP CONTROLLER | 1 | |
| 9240SI | CONTROLLER-LOOP | 14 | |
| 9240SI-1 | LOOP CONTROLLER - HA | 1 | |
| 9240SI-CAL | Calibration - Loop Controller | 1 | |
| 9240SI2 | CABLE LOOP CONTROLLER | 1 | |
| 9240SI | AC RESISTANCE METER − LOOP CONTROLLER | 14 | |
| 924OSI | CONTROLLER-LOOP | 14 | |
| 92520A010101 | TEST CONTROL BOX | 1 | |
| 92524A010101 | FAULT CONTROL BOX | 1 | |
| 92700-10338-041 | PITCH CONTROL ROD ALIGNMENT TOOL | 1 | |
| 92700-10377-041 | TORQUE ADAPTER, PITCH CONTROL ROD | 1 | |
| 928-4230-ID | Receiver Controller C-10373 /Werner Robins Alc | 1 | |
| 9300500 | PROTRACTOR - CONTROL SURFACE | 1 | |
| 9300A860 | CONTROL UNIT | 1 | |
| 930996-101 | FLT CONTROL SURFACE POS IND 5220-00-021-7161-BP | 1 | |
| 93A15150 | CONTROL UNIT | 2 | |
| 93N6035 | REMOTE CONTROL PANEL | 7 | |
| 94-0262-12-VA05 | CALIBRATION CONTROL PROGRAM | 1 | |
| 9401M86 | SOFTWARE CONTROLS - AIRCRAFT | 1 | |
| 942-360 | HOSE: 38IN,W/CONTROL,NO WAND, | 2 | |
| 9429M64 | ELECTRONIC CONTROL UNIT, VSV ACTUATOR SETTING | 1 | |
| 94320001 | STEADY CONTROL 703A94320001 | 1 | |
| 9439MI | SPEED SELECT CONTROL BOX | 1 | |
| 9441M84 | CONTROL SHROUD LOCK, DYNAMIC BALANCE OPERATION | 1 | |
| 9446M18 | CONTROLLER - HEATER-RESISTIVE | 1 | |
| 9446M18G01 | CONTROLLER | 1 | |
| 9446M18P01 | CONTROLLER, HEATER-RESISTIVE | 2 | |
| 9446M20P02 | CONTROLLER, AUTOMATED TORQUING SYSTE | 1 | |
| 9470M56G01 | CONTROLLER, HEATER CAL ROD (110 VAC, 60 HZ) (CAL ROD HEATER CONTROLLER) | 1 | |
| 9471M34G02 | CABLE DESCARGA CEOD PMAT CONTROL CABLE | 8 | |
| 9471M42 | CART, AIR CONTROL - TORQUE SYSTEM | 1 | |
| 95-92011-0001 | kit blocaje control vuelo | 1 | |
| 95-92015-0001 | ENGINE CONTROL RIGGING SET | 1 | |
| 95-92015-0003 | ENGINE CONTROL RIGGING SET | 1 | |
| 95-92015-001 | ENGINE CONTROL RIGGING SET | 1 | |
| 95-92018-0001 | FLIGHT CONTROLS RIGGING KIT | 1 | |
| 95-92018-0003 | Flight Controls Rigging Kit | 1 | |
| 95-92018-0005 | Flight Controls Rigging Kit | 1 | |
| 95-92018-0007 | Flight Controls Rigging Kit | 1 | |
| 95-92020-0001 | CONTROL REGLAJE LG | 1 | |
| 95-92054-0001 | TEMPLATE,CONTROL RIGGING,AIRCRAFT | 1 | |
| 95-92069-0001 | TEMPLATE,CONTROL | 1 | |
| 95-92069-0002 | TEMPLATE,CONTROL | 1 | |
| 95-92070-0001 | TEMPLATE,CONTROL | 1 | |
| 95-92070-0003 | GAUGE - CONTROL WHEEL - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92071-0001 | TEMPLATE,CONTROL RIGGING,AIRCRAFT | 1 | |
| 95-92071-0002 | TEMPLATE,CONTROL | 1 | |
| 95-92071-0004 | GAUGE - CONTROL PEDALS - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| 95-92083-0001 | GAUGE, CONTROL COLUMN | 1 | |
| 95-92083-0005 | GAUGE - CONTROL COLUMN | 1 | |
| 95-92084-0005 | CONTROL MANUAL RAMPA | 1 | |
| 95-92108-0003 | FLIGHT CONTROLS RIGGING KIT | 1 | |
| 95-92118-0001 | TESTER CONTROL DE FLAPS | 1 | |
| 95-92160-0001 | MEDIDOR DE ESFUERZO CONTROL RUEDA | 1 | |
| 95-92O83-0001 | GAUGE, CONTROL COLUMN | 1 | |
| 95-93011-0001 | Kit herram control vuelo | 1 | |
| 95-93031-0001 | QUADRANT CONTROL TEST BOX | 1 | |
| 95-93032-0001 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL | 1 | |
| 95-93032-0005 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL - SUPPORT EQUIPMENT AND TOOLS DATA 95-93032-0001 | 1 | |
| 952167-1 | CONTROL LOGIC | 1 | |
| 952173-1 | MONITOR CONTROL (CCA) | 1 | |
| 956A1614G01 | ADAPTER, SPLIT CONTROL UNIT (SCU) SERVO VALVE ASSEMBLY (SVA) | 6 | |
| 956A6077 | GAUGE - CONTROL GAP F256 | 1 | |
| 956A6627 | FIXTURE - RANGE CONTROL - ENGINE ASSEMBLY | 1 | |
| 956A6627G02 | RANGE CONTROL FIXTURE ENGINE ASSEMBLY | 1 | |
| 956A6645 | FIXTURE - CONTROL - ZL GAP | 1 | |
| 956A6647 | CONTROL BOX - DOWNLOAD AND MENU MODE - ENGINE ASSY | 1 | |
| 956A6647G02 | ENGINE ASSY DOWNLOAD AND MENU MODE CONTROL BOX (MTM) | 1 | |
| 956A8614G01 | PIN - LOCKING, AGB MANUAL CONTROL | 1 | |
| 956A8679G01 | PIN - LOCKING, AGB MANUAL CONTROL | 4 | |
| 96-520011 | ROD END, TAB CONTROL FIXED | 1 | |
| 961-5023-001 | CONTROL, WINDSHIELD TEMP. | 1 | |
| 96103001 | CONTROL BUTTON TOOL | 1 | |
| 9632500-8001 | DRAIN CONTROL CABLE | 1 | |
| 9632500-9001 | DRAIN CONTROL CABLE | 1 | |
| 964-0434-041 | TEST SET,FLIGHT CONTROL | 1 | |
| 964A0000-04 | FLOW CONTROL VALVE | 1 | |
| 965042 | TOOL - HOLDING, ELEVATOR CONTROL CABLE TENSION REGULATOR | 1 | |
| 974733 | UNITED ELECTRIC CONTROLS CIRCULAR CHARTS | 1 | |
| 96830127 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96830131 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96830223 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96830364 | TCS TRAY FOR 1/4" CONTROL TOOLS | 1 | |
| 96830365 | TCS TRAY FOR 1/4" CONTROL TOOLS | 1 | |
| 96830653 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96830654 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96834322 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96834323 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96834324 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96834325 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96834326 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96838194 | TOOL ASSORTMENT IN THE TOOL-CONTROL INSERT SYSTEM | 1 | |
| 96838814 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96838815 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 96838816 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 97000F32001001 | CONTROL UNIT - LG FREE FALL ACTUATOR | 1 | |
| 97102A4241M000 | PIN - RIGGING, PARKING BRAKE CONTROL | 8 | |
| 97830209 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 97830264 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 97830265 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 97830607 | TOOL SET IN TOOL-CONTROL TRAY-SYSTEM | 1 | |
| 97842804 | Tool assortment in the Tool-Control insert system + tool trolley | 1 | |
| 714E6 | RADIO CONTROL | 1 | |
| 8007681000 | EN-OUT-C CONTROLE DEBIT | 1 | |
| 8812381000 | CONTROL BOX | 1 | |
| 8812382100 | CONTROL DEVICE | 1 | |
| 8813060000 | CONTROL DEVICE | 1 | |
| 8814210000 | CONTROL BOX | 1 | |
| 8815661000 | CONTROL BOX | 1 | |
| 8816445000 | CONTROL BOX | 2 | |
| 8816949000 | CONTROL HARNESS | 1 | |
| 8817446000 | MEASURE THE NEEDED FORCE TO MOVE THE CONTROL ARM | 1 | |
| 8818882000 | CONTROL BOX | 1 | |
| 8819396000 | CONTROL SUPPORT | 1 | |
| 9580118780 | AUXILIARY CONTROL UNIT | 1 | |
| 860135953100000 | TEST SET MLG SAFETY RELAY CONTROL SIMULATOR | 1 | |
| 860135953100001 | TEST SET - LANDING GEAR SAFETY RELAY CONTROL SIMULATOR | 3 | |
| 860135969100000 | THROTTLE CONTROL ADJUST TOOL | 1 | |
| 979786-5 | VALVE ASSY LOAD CONTROL | 1 | |
| 979786-6 | VALVE ASSY LOAD CONTROL | 1 | |
| 97A27102024000 | MEASURING EQUIPMENT - AILERON TRIM CONTROL OPERAT LOAD | 1 | |
| 97A27202011000 | MEASURING EQUIPMENT-RUDDER TRIM CONTROL OPERATING LOAD | 1 | |
| 97A27302009000 | Locking Equipment - Pitch Trim ControlWheel | 9 | |
| 97A27302010000 | MEASURING EQUIPMENT -PITCH TRIM CONTROL OPERATING LOAD | 2 | |
| 97A27602009000 | MEASURING EQUIPMENT - SPEEDBRAKE CONTROL | 1 | |
| 97A27902016000 | PLATE - RIGGING, PARKING BRAKE CONTROL | 9 | |
| 97A27902016002 | ROD CONTROL | 1 | |
| 97A27902026000 | RING-LOCKING,RUDDER AND AILERON TRIM CONTROLS WHEELS | 3 | |
| 97A32302001000 | MEASURING EQUIPMENT - EMERGENCY EXTENSION CONTROL LOAD | 2 | |
| 97A32602004000 | TEST SET - LANDING GEAR SAFETY RELAY CONTROL SIMULATOR | 3 | |
| 97A32602004001 | TEST SET-LANDING GEAR SAFETY RELAY CONTROL SIMULATOR | 1 | |
| 97A49602000000 | MEASURING EQUIPMENT - RAT CONTROL OPERATING LOAD | 2 | |
| 97A76102003000 | ADAPTER-SPRING SCALE,THROTTLE CONTROL LEVER | 8 | |
| 97A76102008000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 1 | |
| 97A76102500002 | QUADRANT-GRADUATED THROTTLE REVERSER CONTROLS | 2 | |
| 97F32001001000 | CONTROL UNIT-LEG FREE FALL ACTUATOR | 5 | |
| 980-7049-001 | FUNCTION CONTROL PANEL | 1 | |
| 980-9545 | ATTENDANT CONTROL UNIT | 1 | |
| 980L-1/1A | Universal flight control test Set | 2 | |
| 98814924 | TOOL ASSORTMENT IN THE TOOL-CONTROL INSERT SYSTEM | 1 | |
| 98830203 | WORKSHOP TROLLEY WITH TOOL CONTROL INLAYS AND TOOL | 1 | |
| 9811603461 | RECTIFIER: CONTROLLED,SILICON,CHARGE, SUPERMASTER | 2 | |
| 9879902011B(SUP II) | CURRENT CONTROL BOARD | 1 | |
| 9879903001 | JFM 9879903001 Superseder IIA, IIA-V Control Switch Board | 1 | |
| 9879903002 | BOARD ASSY, CONTROL | 1 | |
| 9879903008 | CONTROL DIRCUIT BOARD | 1 | |
| 9879903011 | JFM 9879903011 Superseders Current Control Circuit Board | 1 | |
| 9879960001 | JFM 9879960001 Superseder III Control Switch Board | 1 | |
| 9891601102 | JFM 9891601102 miniMasterCharger Series II Microprocessor Controlled Battery Charger-Analyzer | 2 | |
| 9852700800100 | Flight Control Engine Pin set | 1 | |
| 98827008001001 | FLIGHT CONTROL ENGINE PINS | 1 | |
| 98A20003000000 | RIGGING PIN BOX FOR B2, B2K AND B4 FLIGHT CONTROLS | 2 | |
| 98A20003002000 | RIGGING PIN BOX FOR CF6-50 ENG CONTROLS | 2 | |
| 98A27003000000 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | 10 | |
| 98A27003001000 | RIG PIN FLT CONTROL AUTOPILOT ACTUATOR | 29 | |
| 98A27103000000 | BAR-LOCKING,AILERON CONTROL CABLE TENSION POS.O | 1 | |
| 98A27103001000 | WEDGE-LOCKING PITCH TRIM CONTROL CABLE TENSION REGULTR | 3 | |
| 98A27203001000 | RIGGING PIN - CABLE QUADRANT, RUDDER MECHANICAL CONTROLS | 8 | |
| 98A27203500000 | MEASUREMENT BASE-FLIGHT CONTROL SURFACE DEFLECTION | 15 | |
| 98A27203501003 | ATTCHMENT-YAW CONTROL | 1 | |
| 98A27207601000 | PIN - RIGGING, VARIABLE STOP UNIT,RUDDER MECHANICAL CONTROLS | 5 | |
| 98A27208442000 | FIXTURE HINGE ARMS SERVOCONTROLS | 3 | |
| 98A27307541000 | Rigging pin-cable quadrant elevatormechanical control | 10 | |
| 98A27307545000 | RIGGING PIN - CABLE QUADRANT, RUDDER MECHANICAL CONTROLS | 8 | |
| 98A27307547000 | RUDDER SERVO CONTROL RIG PIN TOOL | 6 | |
| 98A27307549000 | PIN, RIGGING, ELEVATOR CONTROL BELLCRANKS | 11 | |
| 98A27308005000 | PROTRACTOR-CONTROL SURFACE DEFLECTION | 3 | |
| 98A27308005400 | PROTRACTOR-CONTROL SURFACE DEFLECTION | 1 | |
| 98A27309000000 | PIN - RIGGING, RUDDER CONTROL | 7 | |
| 98A27309010000 | PIN, RIGGING, ELEVATOR CONTROL BELLCRANKS | 2 | |
| 98A27403000000 | MEASURING EQUIPMENT-PITCH TRIM CONTROL OPERATING LOAD | 4 | |
| 98A27407530000 | FIXTURE-HINGE ARMS AND SERVO CONTROLS, RUDDER | 6 | |
| 98A2750100000 | I/R EQUIP FLAP CONTROL UNIT | 1 | |
| 98A27501000000 | EQUIPMENT-R/I FLAP POWER CONTROL UNIT | 1 | |
| 98A27501002000 | PIN-RIGGING,FLAP CONTROL | 1 | |
| 98A27501006000 | PIN-RIGGING,FLAP CONTROL | 2 | |
| 98A27501007000 | PIN-RIGGING,MICROSWITCH ,BOX FLAP CONTROL | 1 | |
| 98A27501500000 | EQUIPMENT-R/I FLAP POWER CONTROL UNIT | 3 | |
| 98A27501500001 | EQUIPMENT-R I FLAP POWER CONTROL UNIT | 1 | |
| 98A27503001000 | MANUAL DRIVE EQUIPMENT - WING FLAP CONTROL MECHANISM | 5 | |
| 98A27503001001 | WING FLAP/SLAT CONTROL DRIVE TOOL | 1 | |
| 98A27503003000 | GUARD,SAFETY-FLAP/SLAT CONTROL LEVER | 10 | |
| 98A27503504000 | MEASURING EQUIPMENT - FLAP AND SLAT CONTROL LEVER | 1 | |
| 98A27504022000 | CONTROL SETTING DEVICE-FLAP TRACK FAIRING | 8 | |
| 98A27508011000 | CONTROL SETTING DEVICE - FLAP TRACK FAIRINGS | 3 | |
| 98A27508015000 | PIN-RIGGING, ARTIFICIAL FEEL UNIT, ELEVATOR MECHANICAL CONTROLS | 7 | |
| 98A27508050000 | RIGGING PIN - ELEVATOR CONTROL | 7 | |
| 98A27508060000 | PIN - RIGGING, ELEVATOR CONTROL | 2 | |
| 98A27601000000 | SAFETY COLLAR - SPOILER SERVO CONTROL | 6 | |
| 98A27601003000 | RIGGING PIN - SPEEDBRAKE CONTROL | 1 | |
| 98A27601007000 | RIGGING PIN - SPEEDBRAKE CONTROL | 1 | |
| 98A27601011000 | RIGGING PIN - SPEEDBRAKE CONTROL | 1 | |
| 98A27601012000 | SAFETY COLLAR - SPEEDBRAKES SERVO CONTROLS | 2 | |
| 98A27601013000 | EQUIPMENT-LOCKING,SPEEDBRAKE CONTROL LEVER | 4 | |
| 98A27601021000 | RIGGING PIN-INNER SPOILER, AIRBRAKE CONTROL | 2 | |
| 98A27603000000 | RIGGING PIN-INNER SPEEDBRAKE SERVO CONTROL INPUT LEVER | 3 | |
| 98A27603002000 | SAFETY COLLAR-OUTER SPEEDBRAKE SERVOCONTROLS | 13 | |
| 98A27604000000 | RIGGING PIN-FLIGHT CONTROLS | 3 | |
| 98A27604001000 | RIGGING PIN-FLIGHT CONTROLS-FUEL SYSTEM | 2 | |
| 98A27604007000 | EXTRACTOR SHAFT SPOILER SPEEDBRAKE SERVO CONTROL | 3 | |
| 98A27608001000 | HOOK WRENCH SPOILER AND OUTER AIRBRAKE SERVO CONTROL | 3 | |
| 98A27608002000 | PEG WRENCH SPOILER AND OUTER AIRBRAKE SERVO CONTROL | 2 | |
| 98A27608011000 | CONTROL BOX-SPOILER,VALVE GROUP | 1 | |
| 98A27608011001 | CONTROL BOX - SPOILER, VALVE GROUP | 1 | |
| 98A27801000000 | EQUIPMENT -REMOVAL INSTALLATION,SLAT CONTROL UNIT | 2 | |
| 98A27801001000 | SLAT CONTROL RIG PIN | 23 | |
| 98A27801002000 | PIN-RIGGING,SLAT CONTROL | 2 | |
| 98A27801003000 | ZERO RIGGING PIN-KRUEGER FLAP CONTROL | 1 | |
| 98A27801004000 | RIGGING PIN-KRUEGER FLAP CONTROL | 7 | |
| 98A27803005000 | PIN,CHECK-KRUEGER FLAP CONTROL | 5 | |
| 98A27803500000 | KRUEGER FLAP CONTROL SUPPORT | 7 | |
| 98A27808003000 | LOCKING TOOL - PITCH TRIM CONTROL WHEEL | 3 | |
| 98A27808007000 | INSTALLATION EQUIPMENT - FLAP POWER CONTROL UNIT | 5 | |
| 98A279001002000 | PIN,RIGGING-RUDDER CONTROL | 1 | |
| 98A27901000000 | PIN-RIGGING,AILERON CONTROL WHEEL | 14 | |
| 98A27901001000 | PIN-RIGGING,ELEVATOR CONTROL | 9 | |
| 98A27901002 | PIN RIGGING RUDDER CONTROL | 1 | |
| 98A27901002000 | PIN,RIGGING-RUDDER CONTROL | 33 | |
| 98A27901002001 | PIN RIGGING RUDDER CONTROL | 1 | |
| 98A27901002002 | PIN RIGGING RUDDER CONTROL | 1 | |
| 98A27901002003 | PIN RIGGING RUDDER CONTROL | 1 | |
| 98A27901002004 | PIN RIGGING RUDDER CONTROL | 1 | |
| 98A27901002005 | PIN RIGGING RUDDER CONTROL | 1 | |
| 98A27901002006 | PIN RIGGING RUDDER CONTROL | 1 | |
| 98A27901002007 | PIN RIGGING RUDDER CONTROL | 1 | |
| 98A27901003000 | PIN-RIGGING,AILERON CONTROL | 5 | |
| 98A27901004000 | PIN-RIGGING FLAP CONTROL | 1 | |
| 98A27901005000 | PIN POSN19 THROTTLE CONTROL | 7 | |
| 98A27901006 | PIN RIGGING RUDDER CONTROL | 1 | |
| 98A27901006000 | PIN-RIGGING,RUDDER CONTROL | 11 | |
| 98A27901007000 | PIN-RIGGING,ELEVATOR CONTROL | 7 | |
| 98A27901009000 | PIN-RIGGING,PARKING BRAKE CONTROL | 9 | |
| 98A27901010000 | PIN-RIGGING,THROTTLE CONTROL MICROSWITCH UNIT | 4 | |
| 98A27901011000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 5 | |
| 98A27901014000 | PIN-RIGGING,NOSE GEAR EMERGENCY LOWERING CONTROL | 7 | |
| 98A27901022000 | TOOL,LOCKING-FLAP/SLAT CONTROL LEVER | 7 | |
| 98A27901023000 | TOOL-LOCK,THROTTLE CONTROL LEVER | 2 | |
| 98A27901024000 | PIN-RIGGING,LP FUEL CONTROL | 1 | |
| 98A27901025000 | PIN-RIGGING,LP FUEL CONTROL | 1 | |
| 98A29201000 | PIN RIGGING RAM AIR TURBINE DROP* OUT CONTROLS | 1 | |
| 98A29201000000 | PIN-RIGGING,RAM AIR TURBINE DROP-OUT CONTROLS | 9 | |
| 98A29201001000 | PIN-RIGGING,RAM AIR TURBINE DROP-OUT CONTROLS | 5 | |
| 98A29203000000 | QUADRANT-GRADUATED,RAM AIR TURBINE CONTROL | 5 | |
| 98A32101005000 | PIN-RIGGING,MAIN GEAR EMERGENCY CONTROL SELECTOR | 2 | |
| 98A32201004000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 6 | |
| 98A32301000000 | RIGGING PIN, NOSE GEAR EMERGENCY LOWERING CONTROL | 32 | |
| 98A32301001000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 7 | |
| 98A32301002000 | PIN-RIGGING,PARKING BRAKE CONTROL | 9 | |
| 98A32301003000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 1 | |
| 98A32301004000 | PIN-RIGGING,NOSE GEAR EMERGENCY LOWERING CONTROL | 5 | |
| 98A32301006000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 5 | |
| 98A32301007000 | PIN-RIGGING,LANDING GEAR EMERGENCY LOWERING CONTROL | 5 | |
| 98A32301009000 | PIN-RIGGING,NOSE GEAR DOOR UP LOCK BOX CONTROL | 3 | |
| 98A32301010000 | PIN-RIGGING,NOSE GEAR DOOR SEQUENCE VALVE CONTROL | 9 | |
| 98A32301011000 | PIN-RIGGING,NOSE GEAR DOOR SEQUENCE VALVE CONTROL | 5 | |
| 98A32301012000 | PIN-RIGGING,NOSE GEAR DOOR SEQUENCE VALVE CONTROL | 6 | |
| 98A32301013000 | Pin-rigginglanding gear and door emergency lowering control | 22 | |
| 98A32301016000 | RIGGING, LANDING GEAR EMERGENCY LOWERING CONTROL . | 6 | |
| 98A32301018000 | PIN-RIGGING,MAIN GEAR SELECTOR CONTROL | 5 | |
| 98A32301020000 | PLATE-RIGGING,PARKING BRAKE CONTROL | 5 | |
| 98A32303002000 | PIN-RIGGING,MAIN GEAR DOOR SELECTOR CONTROL | 8 | |
| 98A32401000000 | PIN-RIGGING,BRAKING CONTROL | 5 | |
| 98A32401500000 | RIGGING PIN - BRAKING CONTROL | 13 | |
| 98A32501000000 | RIGGING PIN-STEERING CONTROL | 1 | |
| 98A32501002000 | PIN,RIGGING-WHEEL STEERING CONTROL | 4 | |
| 98A32501003000 | PIN-RIGGING,NOSE GEAR WHEEL STEERING CONTROL | 9 | |
| 98A32501005000 | PIN - RIGGING, WHEEL STEERING CONTROL | 7 | |
| 98A32501006000 | RIGGING PIN-STEERING CONTROL COUPLER | 5 | |
| 98A32503001000 | PIN,RIGGING-WHEEL STEERING CONTROL | 1 | |
| 98A32503503000 | GRADUATED DRUM-NOSEWHEEL STEERING CONTROL HANDWHEEL | 4 | |
| 98A34103000-044 | TRIPOD CONTROL | 1 | |
| 98A34103000000 | CONTROL-TOOL FUSELAGE | 3 | |
| 98A49601000000 | PIN,RIGGING-RAT CONTROL | 4 | |
| 98A49601000001 | PIN,RIGGING-RAT CONTROL | 1 | |
| 98A49601000002 | PIN,RIGGING-RAT CONTROL | 1 | |
| 98A49601001000 | LOCKING TOOL-RAT CONTROL HANDLE | 5 | |
| 98A52107632000 | SAFETY PIN SET - EMERGENCY CONTROL HANDLE | 26 | |
| 98A52108003000 | CONTROL HANDLE SAFETY PIN TOOL | 1 | |
| 98A52108003001 | SAFETY PIN SET-EMERG. CONTROL HANDLE Alt: 98A52107632000 PIN SAFETY SLIDE | 2 | |
| 98A53003012-001 | CONTROL-ARTICULATED | 5 | |
| 98A53003012000 | CONTROL-ARTICULATED | 1 | |
| 98A53003012001 | CONTROL-ARTICULATED | 5 | |
| 98A53003012044 | CONTROL ARTICULATED TRACK OUTILLAGE CONTROLE RAIL C38-2/C54-2 | 1 | |
| 98A53003012046 | CONTROL ARTICULATED TRACK OUTILLAGE CONTROLE RAIL C38-2/C54-2 | 1 | |
| 98A53207606000 | PIN - RIGGING, RUDDER CONTROL | 7 | |
| 98A54003110000 | CONTROL POSITION AND ALIGNMENT | 1 | |
| 98A54003110040 | CONTROL-POSITIONING OF FITTING | 1 | |
| 98A54003110042 | CONTROL-POSITION TOOL-FWD,AFT SUPPORT ASSY | 1 | |
| 98A54003110044 | CONTROL-POSITION TOOL-BEAM ASSY,LH | 1 | |
| 98A54003110045 | CONTROL-POSITION TOOL-BEAM ASSY,RH | 1 | |
| 98A54003110046 | CONTROL-POSITION TOOL-FWD,AFT SUPPORT ASSY | 1 | |
| 98A54003110049 | CONTROL-POSITION TOOL-BEAM ASSY,RH | 1 | |
| 98A54003110050 | CONTROL-POSITION TOOL-FWD,AFT SUPPORT ASSY | 1 | |
| 98A54003110052 | CONTROL-POSITION TOOL-BEAM ASSY,LH | 1 | |
| 98A54003110053 | CONTROL-POSITION TOOL-BEAM ASSY, RH | 1 | |
| 98A54003110054 | CONTROL-POSITION TOOL-FWD,AFT SUPPORT ASSY | 1 | |
| 98A54003110056 | CONTROL-POSITION TOOL-BEAM ASSY,LH | 1 | |
| 98A54003110057 | CONTROL-POSITION TOOL-BEAM ASSY,RH | 1 | |
| 98A54003110060 | CONTROL-POSITION TOOL - BEAM ASSY, LH | 1 | |
| 98A54003110061 | CONTROL-POSITION TOOL - BEAM ASSY, RH | 1 | |
| 98A54003110062 | CONTROL-POSITION TOOL - FWD, AFT SUPPORT ASSY | 1 | |
| 98A54003110064 | CONTROL-POSITION TOOL - BEAM ASSY, LH | 1 | |
| 98A54003110065 | CONTROL-POSITION TOOL - BEAM ASSY, RH | 1 | |
| 98A55308440000 | SLING UNIVERSAL FLIGHT CONTROLS | 13 | |
| 98A57304000000 | PIN - RIGGING, RAT DROP OUT CONTROLS | 1 | |
| 98A57304000001 | PIN - RIGGING, RAT DROP OUT CONTROLS | 1 | |
| 98A57304000002 | PIN - RIGGING, RAT CONTROLS | 1 | |
| 98A57304009000 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | 1 | |
| 98A76001000000 | PIN RIGGING - THROTTLE CONTROL | 3 | |
| 98A760010000000 | PIN RIGGING, THROTTLE CONTROL | 1 | |
| 98A76103000000 | BAR-LOCK.,THROTTLE CONTROL CABLE TENSION REGUL.0 POSI | 5 | |
| 98A76103001000 | RIGGING PIN-FUEL CONTROL UNIT | 1 | |
| 98A76103003000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 1 | |
| 98A76103004000 | ADAPTER-SPRING SCALE,T/R CONTROL LEVER | 5 | |
| 98A78303001000 | DRILLING OF THRUST REVERSER CONTROL LEVER | 1 | |
| 98A78303500000 | EXTENSION-FLEXIBLE THRUST REVERSER MANUAL CONTROL | 1 | |
| 98A79003000000 | PIN-RIGGING, RUDDER CONTROL | 10 | |
| 98D24708650000 | DEVICE-PRE RIGGING, CONTROL CABLE | 1 | |
| 98D27203500000 | BRACKET,TENSION REGULATOR-RUDDER CONTROL | 27 | |
| 98D27207516000 | RIGG.PINSET RUDDER CONTROL(5 ITEMS) | 18 | |
| 98D27207516040 | RIGGING PIN-RUDDER CONTROL | 2 | |
| 98D27207516090 | RIGGING PIN-RUDDER CONTROL | 2 | |
| 98D27207516330 | RUDDER CONTROL RIG PIN TOOL | 3 | |
| 98D27207545000 | PIN RIGGING RUDDER CONTROL | 29 | |
| 98D27207546000 | PIN RIGGING RUDDER CONTROL | 27 | |
| 98D27207547000 | PIN RIGGING RUDDER CONTROL | 32 | |
| 98D27207548 | RIG PIN CRANK ASSEMBLY RUDDER CONTROL | 1 | |
| 98D27207548000 | RIGGING PIN-BELL CRANK ASSY RUDDER CONTROL UNIT | 32 | |
| 98D27207549000 | PIN RIGGING RUDDER CONTROL | 31 | |
| 98D27303000001 | LOAD APPLICATION TOOL (CONTROL TOOL) | 31 | |
| 98D27303003000 | SERVO CONTROL AILERON ELEVATOR | 2 | |
| 98D27303003001 | SERVO CONTROL | 24 | |
| 98D27303022001 | SERVO CONTROL OSCILLATION AIL | 11 | |
| 98D27309005000 | DAFETY COLLAR- SERVOCONTROL, ELEVATOR | 7 | |
| 98D27309009000 | COLLAR - ELEVATOR SERVO CONTROL SAFETY | 4 | |
| 98D27309009000/2 | SAFETY COLLER ELEV.SERVO CONTROLS | 1 | |
| 98D27309009001 | COLLAR-ELEVATOR SERVO CONTROL SAFETY | 1 | |
| 98D27309009002 | COLLAR, SAFETY - SERVO CONTROL | 18 | |
| 98D27309009002 | COLLAR SAFETY SERVO CONTROL ELEVATOR | 18 | |
| 98D27309009002 OR 98D27309009004 | LOCK ELEVATOR SERVO CONTROL | 1 | |
| 98D2730900900298D27309009004 | LOCK ELEVATOR SERVO CONTROL | 1 | |
| 98D27309009003 | COLLAR, SAFETY - SERVO CONTROL | 12 | |
| 98D27309009004 | COLLAR, SAFETY - SERVO CONTROL- Latest issue -004 | 17 | |
| 98D2740 3500 000 | PITCH TRIM CONTROL LOCKING | 37 | |
| 98D27403000000 | PITCH TRIM CONTROL LOCKING | 10 | |
| 98D27403500000 | PITCH TRIM CONTROL LOCKING | 37 | |
| 98D27403500001 | PITCH TRIM CONTROL LOCKING | 2 | |
| 98D27403900000 | PITCH TRIM CONTROL LOCKING | 1 | |
| 98D27403900001 | PITCH TRIM CONTROL LOCKING | 2 | |
| 98D27407504000 | DEVICE R/I THS ACTUATOR (6 PZ) (CONTROL TOOL) | 2 | |
| 98D27407506000 | DEVICE R/I THS ACTUATOR (6 PZ) (CONTROL TOOL) | 6 | |
| 98D27407532000 | RIGGING PIN - THS MECHANICAL CONTROL | 20 | |
| 98D27407532000 | PIN RIGGING - THS MECHANICAL CONTROL | 20 | |
| 98D27408650000 | DEVICE-PRE RIGGING,CONTROL CABLE | 8 | |
| 98D27503000000 | FLIGHT CONTROL RIGGING PIN SET | 2 | |
| 98D27504005000 | PITCH TRIM CONTROL LOCKING | 24 | |
| 98D27603002001 | USED TO SET TO SPOLIER SERVOCONTROL TO MANUAL THE POSITION AND LOCK IT IN POSITION. | 30 | |
| 98D27803000000 | LOCKING TOOL- FLAP/SLAT CONTROL LEVER | 41 | |
| 98D27803000000-200 | LOCKING TOOL FLAP/SLAT CONTROL LEVEL | 1 | |
| 98D27803000200 | LOCKING TOOL FLAP / SLAT CONTROL LEVER | 1 | |
| 98D27803500001 | TOOL-ZERO LOCKING, FLAP-SLAT CONTROL | 35 | |
| 98D27803500002 | TOOL ZERO LOCKING ( FLAP SLAT CONTROL LEVER ) | 6 | |
| 98D28108418000 | CONTROL BOX - VALVE ACT | 2 | |
| 98D34003500000 | PITCH TRIM CONTROL LOCKING | 31 | |
| 98D34103001000 | CONTROL TOOL-STATPORT | 6 | |
| 98D34103002000 | ADAPTERS (CONTROL TOOL) | 32 | |
| 98D52003001000 | CONTROL UNIT,O C-AIRSTAIRS DOOR | 4 | |
| 98D5203001 | CONTROL UNIT O/C AIRSTAIRS DOOR | 1 | |
| 98D52207507000 | RUDDER CONTROL RIGGING PIN (BELL‑CRANK LOCK) | 32 | |
| 98D54003007000 | A320 CFACFBCFChinges cover replacement and control tool | 2 | |
| 98D54003007001 | A321 CFDhinges cover replacement and control tool | 2 | |
| 98D54003007002 | A320/A321 1AA1AB hinges cover replacement and control tool | 1 | |
| 98D54003007003 | A340 1Ahinges cover replacement and control tool | 1 | |
| 98D55307528000 | KIT TOOL R/I RUDDER BEARING (CONTROL TOOL) | 17 | |
| 98D57103001000 | CONTROL TO TAPER LOCK | 4 | |
| 98D97403500000 | PITCH TRIM CONTROL LOCKING | 1 | |
| 98DNSA20208080 | THROTTLE CONTROL ARTIFICIAL FEEL UNIT | 17 | |
| 98DNSA20208120 | THROTTLE CONTROL LEAVER ASSY | 18 | |
| 98F27003001000 | WRENCH-AILERON SERVO CONTROL ELECTRICAL CONNECTOR | 18 | |
| 98F27003501000 | TOOL-RUDDER TRAVEL CONTROL | 9 | |
| 98F27108438000 | PITCH TRIM CONTROL LOCKING | 19 | |
| 98F27201005000 | PROTRACTOR-RUDDER CONTROL SURFACE DEFLECTION | 1 | |
| 98F27203501000 | CONTROL,TOOL-RUDDER | 1 | |
| 98F27203502000 | PIN,LOCATING-ELEVATOR,SERVO CONTROL | 12 | |
| 98F27207505000 | PIN - LOCKING, FLIGHT CONTROL COMPARTMENT | 1 | |
| 98F27207515000 | Pin rigging-bell crank assy-ruddermechanical control | 19 | |
| 98F27309004000 | PIN CENTERING-ELEVATOR INTALAT (CONTROL TOOL) | 13 | |
| 98F27401000000 | PITCH TRIM CONTROL | 19 | |
| 98F27407504000 | PITCH TRIM CONTROL | 10 | |
| 98F27508209000 | PIN SET-NEUTRAL SETTING (CONTROL TOOL) | 14 | |
| 98F27608253000 | Safety clip-sp control | 7 | |
| 98F27608253001 | Safety clip-sp control | 10 | |
| 98F32001001000 | CONTROL UNIT-LEG FREE FALL ACTUATOR | 1 | |
| 98F32104021040 | OLEO CONTROL ASSY | 1 | |
| 98F32104021042 | BOGIE BM CONTROL ASSY | 1 | |
| 98F32104021044 | OLEO CONTROL ASSY | 1 | |
| 98F32104021046 | BOGIE BM CONTROL ASSY | 1 | |
| 98F32104027LAN | UPLOCK SETTING TOOL A-340 (CONTROL TOOL) | 1 | |
| 98F34103000000 | ADAPTER (CONTROL TOOL) | 16 | |
| 98F34103002000 | CONTROL,TOOL-FUSELAGE CONTOUR STATPORT | 3 | |
| 98F34103003000 | PITOT PRB FLSHNG TOOL (CONTROL TOOL) | 28 | |
| 98F52108213000 | BALLAST WEIGHT (CONTROL TOOL) | 1 | |
| 98F52108241000 | BALLAST WEIGHT (CONTROL TOOL) | 2 | |
| 98F52308244000 | ADJUSTING TOOL CARGO DOOR (CONTROL TOOL) | 2 | |
| 98F52308279000 | BAR - R/I ACTUATOR (CONTROL TOOL) | 19 | |
| 98F52308330000 | SOCKET LAMP REMV.CARGO CONTROL | 14 | |
| 98L21503004000 | CONTROLLER,CRADLER | 2 | |
| 98L21503004040 | CRADLE CONTROLLER | 1 | |
| 98L27208513000 | SUPPORT - SERVO CONTROL, RUDDER | 2 | |
| 98L27309008000 | ADAPTER KIT-EHA OR SERVOCONTROL | 4 | |
| 98L27801001000 | LOCKING TOOL-FLAP SLAT CONTROL LEVER | 8 | |
| 98L27801001001 | CONTROL LEVER- FLAP SLAT | 1 | |
| 98L27801001200 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001202 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001204 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001206 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001208 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001210 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001212 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001214 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L27801001216 | LEVIER CONTOLE BECS&VOLETS CONTROL LEVER-SLAT/FLAP | 1 | |
| 98L32301002000 | DEVICE,SAFETY-LANDING GEAR CONTROL LEVER | 11 | |
| 98L323010020000 | LDG CONTROL LOCK | 1 | |
| 98L32301002001 | DEVICE,SAFETY-LANDING GEAR CONTROL LEVER | 3 | |
| 98L36103002000 | TEST DEVICE (CONTROL TOOL) | 29 | |
| 98S 270 0 8001 001 | FLIGHT CONTROL AND ENGINE PINS | 16 | |
| 98S0600251000 | Flying Control Rigging Board | 1 | |
| 98S06002510001 | Flying Control Rigging Board | 3 | |
| 98S06002511000 | Flying Control Rigging Board | 3 | |
| 98S06002511001 | Flying Control Rigging Board | 3 | |
| 98S26005000000 | SEALING CONTROL TOOL | 6 | |
| 98S2700001204D | CONTROL PIN | 1 | |
| 98S27003001000 | FLAP CONTROL LEVER | 12 | |
| 98S27003010000 | GUARD-SAFETY FLAP CONTROL | 13 | |
| 98S27003010000-REVA0 | SAFETY CLAMP WING FLAP CONTROL HANDLE | 1 | |
| 98S27003010000 | FLAP CONTROL SAFTY TOOL | 13 | |
| 98S27003011000 | SAFETY CONTROL WING FLAP ACTUATOR | 14 | |
| 98S27005003000 | Wing Flap Control Box | 6 | |
| 98S27005003000-CAL | Calibration - Flap Control Box | 1 | |
| 98S27005003000-REVA | WING FLAP CONTROL BOX | 1 | |
| 98S27005004000 | UNSWAGING AND SWAGING LOOLS FLIGHT CONTROLS | 6 | |
| 98S27005004000-REVF | UNSWAGING AND SWAGING TOOLS FLIGHT CONTROLS | 1 | |
| 98S27005017000 | FLIGHT CONTROL BALANCING TOOL | 1 | |
| 98S27008001 | FLIGHT CONTROL ENGINE PINS | 1 | |
| 98S2700800100 | FLIGHT CONTROL ENGINE PIN SET | 1 | |
| 98S27008001000 | FLIGHT CONTROL ENGINE PINS SET | 2 | |
| 98S27008001001 | Flight Control Engine Pins | 16 | |
| 98S27008001001-REVD0 | FLIGHT CONTROL ENGINE PINS | 1 | |
| 98S27008001201 | CONTROL PIN Ø6 | 2 | |
| 98S27008001202 | CONTROL PIN Ø6 | 1 | |
| 98S27008001203 | FLIGHT CONTROL ENGINE PINS SET | 4 | |
| 98S27008001204 | CONTROL PIN Ø8 | 1 | |
| 98S27008001206 | CONTROL PIN Ø8 | 1 | |
| 98S27008001207 | CONTROL PIN DIA 8 | 2 | |
| 98S27008001208 | CONTROL PIN Ø8 | 1 | |
| 98S27008001209 | CONTROL PIN Ø6.35 | 1 | |
| 98S27008001210 | CONTROL PIN Ø9.95 | 1 | |
| 98S27008001211 | CONTROL PIN Ø6 | 1 | |
| 98S27008001213 | CONTROL PIN DIA 7.96 | 3 | |
| 98S27008001214 | CONTROL PIN DIA 5.98 | 2 | |
| 98S27008501003 | RUDDER CONTROL | 1 | |
| 98S527008001001 | FLIGHT CONTROL ENGINE PINS | 1 | |
| 98S55005000000 | FLIGHT CONTROL SURFACES BALANCING TOOL | 4 | |
| 98S57605002000 | ATR FLIGHT CONTROL BALANICNG TOOL - COMPLETE SET | 3 | |
| 98S61005000000 | PROPELLER CONTROL UNIT SETTING TOOL | 9 | |
| 98S61205000000 | ACTIVE PHASE CONTROL TOOL KIT | 1 | |
| 98S76000002000 | POWER CONTROL LENER PROTECTOR | 7 | |
| 98S76000003010 | HMU CONTROL PIN | 1 | |
| 98S76000003011 | CONTROL PIN | 1 | |
| 98S76000003012 | PCU PIN CONTROL, HMU | 1 | |
| 98S76000003014 | MFCU CONTROL PIN | 1 | |
| 98S76000003015 | PSV/PVM CONTROL PIN | 2 | |
| 98V27103000001 | SERVOCONTROL SPOILER COLLAR | 6 | |
| 98V27208001000 | Rudder servo control support frame | 3 | |
| 98V27208778000 | Rudder servo control disassembly tool | 7 | |
| 98V27208789000 | SUPPORT SERVO CONTROL | 3 | |
| 98V27801000000 | CONTROL LEVER FLAP SLAT | 8 | |
| 98V27801900000 | CONTROL LEVER FLAP SLAT | 2 | |
| 98V27808900000 | CONTROL LEVER FLAP SLAT | 1 | |
| 99/014750 | THRUST CONTROL TEST BOX | 1 | |
| 992002510144706 | CONTROL ASSEMBLY | 1 | |
| 99200251014470600 | CONTROL UNIT | 1 | |
| 99695A010000 | TOOL, DATALOADING-AMS CONTROLLER | 1 | |
| 99A27608397000 | CONTROL BOX - SPOILER | 1 | |
| 99A32501010000 | DEVICE - TESTING AND ADJUSTMENT, NOSE GEAR WHEEL STEERING CONTROL | 8 | |
| 99A57103031000 | PIN - RIGGING, PARKING BRAKE CONTROL | 2 | |
| 99A76101000000 | PIN-RIGGING MAIN ENGINE CONTROL | 2 | |
| 99A761010000000 | PIN-RIGGING, MAIN ENGINE CONTROL | 1 | |
| 99A76101001000 | QUADRANT-GRADUATED ENGINE THROTTLE CONTROL | 2 | |
| 99A76101003000 | RIGGING PIN-THROTTLE CONTROL LEVER | 5 | |
| 99A76101003001 | RIGGING PIN-THROTTLE CONTROL | 1 | |
| 99A76101501000 | PIN - RIGGING, LANDING GEAR EMERGENCY LOWERING CONTROL | 5 | |
| 99A76101505000 | GRADUATED QUADRANT - MAIN ENGINE CONTROL GE | 1 | |
| 99A76101506000 | PIN - RIGGING, PARKING BRAKE CONTROL | 2 | |
| 99D27303500000 | ELEVATOR SERVO CONTROL HARNESS | 3 | |
| 99D28108418-000 | CONTROL BOX | 5 | |
| 99D2810841800 | ACT VALVE CONTROL BOX | 1 | |
| 99D28108418000 | ACT VALVE CONTROL BOX | 5 | |
| 99F27508269000 | CONTROL BOX-S F PCU | 1 | |
| 99F27901000000 | SLAVE TOOL - SERVOCONTROL | 1 | |
| 9C1163G02 | SET PIN, CONTROL ALT | 5 | |
| 9C1698 | ELECTRONIC CONTROL UNIT | 1 | |
| 9C1698G01 | UNIT, CONTROL -ELECTRONIC | 1 | |
| 9C2124 | CONTROL GAUGE, BEARING | 1 | |
| 9C2218 | TOOL KIT, SETTING VBV CONTROL | 1 | |
| 9C2431 | KIT CONTROL POSITION TOGGLE SEAL STG 3-6 | 1 | |
| 9C3171G0 | FIXTURE LOCATING ELECTRONIC CONTROL UNIT | 1 | |
| 9C3171G01 | FIXTURE, LOCATING - ELECTRONIC CONTROL UNIT | 1 | |
| A-60-2600 | HYDRAULIC FOLDER WITH NUMERICAL CONTROL "CNC" | 1 | |
| A1-300.04 | TRIPOD JACKS SET WITH CONTROL STAND | 1 | |
| A1-300.04 & A1-1200.01 | HYDRO TRIPOD JACKS SET WITH CONTROL STAND | 1 | |
| A1-300.04 - x2 (WINGS) - 120t A1-1200.01 - x1 (NOSE) - 30t | HYDRO tripod jack set wide body with control stand A300/A310 /A330/A340 with Automatic Safety Nut Lock Manufacturer: LFT Lukassen (now Hydro)- MFD:1990 | 1 | |
| A1-91-265 | HOIST MINILIFT APU (CONTROL TOOL) | 12 | |
| A101836 | DETENDEUR JETCONTROL | 1 | |
| A10438 | TIRE INFLATION CONTROL BOX(BENCH MOUNTED) | 1 | |
| A20001-138 | Flow Control Valve | 1 | |
| A20005 | CLAMP CONTROL CABLE | 1 | |
| A20005-10 | CONTROL CABLE | 4 | |
| A20005-9 | Clamp - Control Cable | 21 | |
| A21004 | TEST BOX - CURRENT SENSOR FAN, ENVIRONMENTAL CONTROL SYSTEM | 1 | |
| A21004-1 | TEST BOX - CURRENT SENSOR, FAN, ENVIRONMENTAL CONTROL SYSTEM | 2 | |
| A2101-1 | TEST EQUIPEMENT-LOW LIMIT VALVE (CONTROL TOOL) INTER A21011-1 | 1 | |
| A21011-6 | TEST EQUIPEMENT-LOW LIMIT VALVE (CONTROL TOOL) INTER A21011-1 | 12 | |
| A21999 | WRENCH, FLIGHT CONTROLS SERVOACTUATOR JOINT REMOVAL/INSTALLATION | 1 | |
| A22001-15 | REMOTE CONTROL UNIT - MAINTENANCE CONTROL DISPLAY PANEL | 3 | |
| A22001-22 | REMOTE CONTROL UNIT - MAINTENANCE CONTROL DISPLAY PANEL | 15 | |
| A22001-23 | CONTROL UNIT | 4 | |
| A22001-23MCDP | CONTOL UNIT - REMOTE MAINTENANCE CONTROL DISPLAY | 1 | |
| A2201-22 | CONTROL UNIT | 1 | |
| A2201-23 | CONTROL UNIT ASSY | 1 | |
| A24007-1 | ELECTRICAL GROUND POWER CABLE (CONTROL TOOL) | 10 | |
| A24008-19 | TEST BOX - HYDRAULIC MOTOR GENERATOR, GENERATOR CONTROL UNIT | 4 | |
| A24008-27 | TEST BOX - HYDRAULIC MOTOR GENERATOR, GENERATOR CONTROL UNIT | 4 | |
| A24008-37 | TEST BOX - HYDRAULIC MOTOR GENERATOR, GENERATOR CONTROL UNIT | 11 | |
| A27001-1 | RIGGING GAGE - RUDDER POWER CONTROL ACTUATOR | 8 | |
| A27001-2 | RIGGING GAGE - INBD AILERON POWER CONTROL ACTUATOR | 3 | |
| A27001-3 | RIGGING GAGE- ELEVATOR POWER CONTROL ACTUATOR | 7 | |
| A27001-4 | RIGGING GAGE-OTBD AILERON POWER CONTROL ACTUATOR | 7 | |
| A27003-23 | SET77 LOCK RUDDER PWR CONTROL | 17 | |
| A27010-44 | ADAPTOR CONTROL WHEEL | 1 | |
| A27020 | STRAIGHT EDGE CONTROL WHEEL | 1 | |
| A27020-1 | STRAIGHTEDGE - CONTROL WHEEL | 12 | |
| A27020-1-M | STRAIGHT EDGE-CONTROL WHEEL | 1 | |
| A27021 | ADAPTER EQUIPMENT - CONTROL WHEELS | 1 | |
| A27021 REV G | ADAPTER EQUIPMENT - CONTROL WHEELS | 1 | |
| A27021-1 | ADAPTOR EQUIP- CONTROL WHEEL | 1 | |
| A27021-124 | ADAPTER EQUIPMENT - CONTROL WHEEL | 2 | |
| A27021-125 | ADAPTER EQUIPMENT - CONTROL WHEEL | 4 | |
| A27021-17 | Retainer-Adapter Control | 1 | |
| A27021-2 | CONTROL WHEEL ADAPTOR | 1 | |
| A27021-26 | CONTROL COLUMN PROTRACTOR | 1 | |
| A27021-29 | Adapter Equipment - Control Wheels | 16 | |
| A27021-30 | CONTROL WHEEL ADAPTOR EQUIPMENT | 5 | |
| A27021-43 | ADAPTOR EQUIPMENT, CONTROL WHEEL | 1 | |
| A27021-63 | CONTROL COLUMN PROTRACTOR ASSY. | 1 | |
| A27021-69 | ADAPTER EQUIPMENT - CONTROL WHEEL | 13 | |
| A27021-76 | CONTROL COLUMN LOCK | 2 | |
| A27021-81 | CONTROL WHEEL ADAPTOR CLAMP | 1 | |
| A27021-83 | ADAPTER EQUIPMENT CONTROL WHEELS | 2 | |
| A27021-96 | ADAPTER EQUIPMENT - CONTROL WHEEL | 9 | |
| A27021-97 | ADAPTER EQUIPMENT - CONTROL WHEEL | 10 | |
| A27021-98 | ADAPTER EQUIPMENT - CONTROL WHEEL | 13 | |
| A27021-99 | Base-Adapter Control | 1 | |
| A2702129 | ADAPTOR EQUIPMENT - CONTROL WHEEL | 16 | |
| A27025-1 | RIGGING EQUIPMENT - FORCE TRANSDUCER, ELEVATOR CONTROL | 1 | |
| A27028-11 | CHECKING FIXTURE - LOAD LIMITER SPRING, AILERON CONTROL | 3 | |
| A27029-28 | REMOVAL/INSTALLATION FIXTURE - LOAD LIMITER AILERON CONTROL SPRING | 1 | |
| A27030 | TEST BOX - POWER SUPPLY, CONTROL SYSTEM ELECTRONIC UNIT (CSEU) | 1 | |
| A27030-66 | TEST BOX - POWER SUPPLY, CONTROL SYSTEM ELECTRONICS UNIT | 1 | |
| A27044 | TEST BOX - CONVERTER, CONTROL SYSTEMS ELECTRONICS UNIT (CSEU) POWER SUPPLY | 1 | |
| A27044-53 | TEST BOX - CONVERTER, CONTROL SYSTEM ELECTRONICS UNIT (CSEU) POWER SUPPLY | 1 | |
| A27045 | TEST BOX - NOISE, CONTROL SYSTEM ELECTRONICS UNIT (CSEU) POWER SUPPLY | 1 | |
| A27045-16 | TEST BOX - NOISE, CONTROL SYSTEM ELECTRONICS UNIT (CSEU) POWER SUPPLY | 1 | |
| A27046-140 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-141 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-160 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-163 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-176 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-177 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-191 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-192 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-3 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-4 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-8 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27046-99 | TEST FIXTURE - POWER DRIVE COMPONENTS FLIGHT CONTROL | 1 | |
| A27052 | TEST BOX - REGULATOR, CONTROL SYSTEM ELECTRONICS UNIT (CSEU) POWER SUPPLY | 1 | |
| A27052-1 | TEST BOX - REGULATOR, CONTROL SYSTEM ELECTRONICS UNIT (CSEU) POWER SUPPLY | 1 | |
| A27053 | TEST BOX - MONITOR, CONTROL SYSTEM ELECTRONIC UNIT POWER SUPPLY | 1 | |
| A27053-26 | TEST BOX - MONITOR, CONTROL SYSTEM ELECTRONICS UNIT (CSEU) POWER SUPPLY | 1 | |
| A27053-29 | TEST BOX - MONITOR, CONTROL SYSTEM ELECTRONICS UNIT (CSEU) POWER SUPPLY | 1 | |
| A27056-1 | RIG BAR RUD CONTROL RATIO CHANGE INSTL | 1 | |
| A27057-1 | PROTRACTOR BRACKET EQUIPMENT - FEEL CENTERING AND TRIM INSTALLATION, RUDDER CONTROL | 2 | |
| A27057-13 | PROTRACTOR BRACKET EQUIPMENT - FEEL CENTERING AND TRIM INSTALLATION, RUDDER CONTROL | 3 | |
| A27057-9 | PROTRACTOR BRACKET EQUIPMENT - FEEL CENTERING AND TRIM INSTALLATION, RUDDER CONTROL | 1 | |
| A27059 | BREAKOUT BOX - CHOPPER/REGULATOR POWER SUPPLY, CONTROL SYSTEM ELECTRONIC UNIT (CSEU) | 1 | |
| A27060-11 | JIG EQUIPMENT - INBOARD AND OUTBOARD LEADING EDGE SLAT DRIVE AND TRAILING EDGE FLAP DRIVE POWER CONTROL UNIT | 1 | |
| A27063 | BRAKE BOX EQPT-POSITION SENSORS,FLIGHT CONTROLS RIGGING | 1 | |
| A27063-124 | ADAPTER CABLE - CONTROL WHEEL POSITION (FOR 767 PRIOR TO L/N 801) | 1 | |
| A27063-125 | ADAPTER CABLE - CONTROL WHEEL POSITION (FOR 767 PRIOR TO L/N 801) | 1 | |
| A27063-18 | CABLE ASSY FLIGHT CONTROLS RIGGING | 4 | |
| A27063-19 | CABLE ASSY FLIGHT CONTROLS RIGGING | 4 | |
| A27063-2 | BREAKOUT BOX FLIGHT CONTROLS RIGGING | 5 | |
| A27063-20 | CABLE ASSY FLIGHT CONTROLS RIGGING | 4 | |
| A27063-21 | CABLE ASSY FLIGHT CONTROLS RIGGING | 4 | |
| A27063-22 | CABLE ASSY FLIGHT CONTROLS RIGGING | 1 | |
| A27063-23 | CABLE ASSY FLIGHT CONTROLS RIGGING | 1 | |
| A27063-26 | CABLE ASSY FLIGHT CONTROLS RIGGING | 2 | |
| A27063-27 | CABLE ASSY FLIGHT CONTROLS RIGGING | 2 | |
| A27063-29 | CABLE ASSY FLIGHT CONTROLS RIGGING | 2 | |
| A27063-30 | CABLE ASSY FLIGHT CONTROLS RIGGING | 2 | |
| A27063-31 | CABLE ASSY FLIGHT CONTROLS RIGGING | 2 | |
| A27063-32 | CABLE ASSY FLIGHT CONTROLS RIGGING | 2 | |
| A27063-33 | CABLE ASSY FLIGHT CONTROLS RIGGING | 2 | |
| A27063-38 | CABLE ASSY FLIGHT CONTROLS RIGGING | 3 | |
| A27063-39 | CABLE ASSY FLIGHT CONTROLS RIGGING | 3 | |
| A27063-40 | CABLE ASSY FLIGHT CONTROLS RIGGING | 1 | |
| A27063-41 | CABLE ASSY FLIGHT CONTROLS RIGGING | 1 | |
| A27063-71 | BREAKOUT BOX EQUIPMENT - POSITION SENSORS, FLIGHT CONTROLS RIGGING | 1 | |
| A27063-76 | CABLE ASSY FLIGHT CONTROLS RIGGING | 1 | |
| A27063-77 | CABLE ASSY FLIGHT CONTROLS RIGGING | 1 | |
| A27063-84 | CABLE ASSY FLIGHT CONTROLS RIGGING | 2 | |
| A27063-88 | BREAKOUT BOX EQUIPMENT - POSITION SENSORS, FLIGHT CONTROLS RIGGING | 3 | |
| A27063-91 | Breakout Box Equipment - Position Sensors, Flight Control Rigging | 14 | |
| A27063-92 | CABLE ASSY FLIGHT CONTROLS RIGGING | 2 | |
| A27063-93 | CABLE ASSY FLIGHT CONTROLS RIGGING | 2 | |
| A27081-1 | Readout and Control Equipment - Functional Test Stands | 3 | |
| A27081-2 | READOUT AND CONTROL EQUIPMENT - FUNCTIONAL TEST STANDS | 1 | |
| A27081-3 | READOUT/CONTROL EQ | 1 | |
| A27087-1 | WRENCH - CONTROL LEVER, SPEED BRAKE | 4 | |
| A27095-10 | SCALE - CONTROL COLUMN ANGLE | 3 | |
| A27095-10-M | CONTROL COLUMN ANGLE SCALE | 1 | |
| A27109-1 | RIGGING BAR - RATIO CHANGER INSTALLATION, RUDDER CONTROL | 2 | |
| A27113 | CHECK EQPT -0 BREAKOUT TORQUE, ELEVATOR CONTROL | 1 | |
| A27113-1 | CHECK EQUIPMENT - BREAKOUT TORQUE, ELEVATOR CONTROLS OVERRIDE | 1 | |
| A27124-1 | MEASUREMENT TOOL - RUDDER & ELEVATOR POWER CONTROL ACTUATOR FORCE EQUIPMENT - RUDDER FREEPLAY CHECK | 5 | |
| A27124-36 | MEASUREMENT TOOL - RUDDER & ELEVATOR POWER CONTROL ACTUATOR FORCE EQUIPMENT - RUDDER FREEPLAY CHECK | 11 | |
| A27125 | MEASUREMENT TOOL-RUDDER&ELEVATOR POWER CONTROL ACTUATOR | 1 | |
| A27125-17 | MEASUREMENT TOOL - RUDDER AND ELEVATOR POWER CONTROL ACTUATOR | 7 | |
| A27126-1 | HOLDING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR POWER CONTROL UNIT (PCU) | 3 | |
| A27127-1 | (CHECKING FIXTURE-INPUT ROD ASSEMBLY, ELEVATOR PCU (CONTROL TOOL) | 3 | |
| A27129-1 | BREAKOUT EQUIPMENT - STABILIZER CONTROL SYSTEM RIGGING | 3 | |
| A27307549 | PIN RIGGING BELL CRANKS ELEVATOR CONTROL | 1 | |
| A3-290605 | CIRCUIT BOARD: CONTROL & TRIGGER, | 3 | |
| A301-1A | INTERCOMMUNICATION SYSTEM CONTROL | 1 | |
| A310-27-00-00-0243 | STA-LOCK TOOL SET-AILERON SERVO CONTROL | 1 | |
| A32075-1 | SPIN UP EQUIP. (CONTROL TOOL | 14 | |
| A32075-10 | SPIN UP EQUIP. (CONTROL TOOL | 22 | |
| A3231041600000 | UNLOCKING CONTROL DOOR | 1 | |
| A330-92037-0001 | BOOM CONTROL BOX R/I DEVICE | 1 | |
| A330-92605-0001 | REMOTE CONTROL POD | 1 | |
| A33004-32 | TEST BOX-AUTOBRIGHT CONTROL | 1 | |
| A34001-1 | WARNING EQUIPMENT - AIR TRAFFIC CONTROL (ATC), DISTANCE MEASURING EQUIPMENT (DME), VERY HIGH FREQUENCY (VHF) ANTENNA AND DRAIN MAST | 5 | |
| A34001-4 | WARNING EQUIPMENT - AIR TRAFFIC CONTROL (ATC), DISTANCE MEASURING EQUIPMENT (DME), VERY HIGH FREQUENCY (VHF) ANTENNA AND DRAIN MAST | 12 | |
| A34003-1 | TEST BOX - REAR MODULE AND CONTROL PANEL AIR TRAFFIC CONTROL (ATC) | 1 | |
| A34003-43 | TEST BOX - REAR MODULE AND CONTROL PANEL AIR TRAFFIC CONTROL (ATC) | 1 | |
| A34003-46 | TEST BOX - REAR MODULE AND CONTROL PANEL AIR TRAFFIC CONTROL (ATC) | 1 | |
| A34004-27 | TEST BOX - FRONT MODULE, AIR TRAFFIC CONTROL (ATC) | 1 | |
| A34004-30 | TEST BOX - FRONT MODULE, AIR TRAFFIC CONTROL (ATC) | 1 | |
| A34006-1 | TEST BOX - AUTOMATIC DIRECTION FINDER (ADF) CONTROL PANEL AND REAR MODULE | 1 | |
| A34006-21 | TEST BOX - AUTOMATIC DIRECTION FINDER (ADF) CONTROL PANEL AND REAR MODULE | 1 | |
| A34007-33 | TEST BOX - REAR MODULE AND CONTROL PANEL, INSTRUMENT LANDING SYSTEM (ILS) | 1 | |
| A34007-36 | TEST BOX - REAR MODULE AND CONTROL PANEL, INSTRUMENT LANDING SYSTEM (ILS) | 1 | |
| A34008-1 | TEST BOX - REAR MODULE AND CONTROL PANEL | 2 | |
| A34009-29 | TEST BOX - REAR MODULE AND CONTROL PANEL, VERY HIGH FREQUENCY OMNIRANGE/DISTANCE MEASURING EQUIPMENT (VOR/DME) | 1 | |
| A34013-1 | TEST BOX - CONTROL PANEL POWER SUPPLY | 1 | |
| A34013-18 | TEST BOX - CONTROL PANEL POWER SUPPLY | 1 | |
| A34014-14 | TEST BOX - POWER SUPPLY CONTROL PANEL | 1 | |
| A38001-69 | Control Box Assy | 2 | |
| A38FCBGSE | FUEL SUPPLY CONTROL BOX TOOL | 1 | |
| A55001-22 | LOCK EQUIPMENT, HORIZONTAL STABILIZER (CONTROL TOOL) | 14 | |
| A56001 | SLING SET – NUMBER 1 & 3, CONTROL CAB WINDOWS | 1 | |
| A56001-15 | Sling Set Number 1 And 3 Control Cabin Windows | 13 | |
| A56001-15 | SLING SET - No 1 & 3 CONTROL, CAB WINDOWS | 13 | |
| A56001-2 | WINDSHIELD HANDLING SLING (CONTROL TOOL) | 3 | |
| A56001-30 | SLING SET - NUMBER 1 AND 3 CONTROL CABIN WINDOW | 5 | |
| A5735007620000 | QUADRANT - GRADUATED, RAM AIR TURBINE CONTROL | 1 | |
| A5735007820200 | PIN-RIGGING, RAT DROP OUT CONTROLS | 1 | |
| A71015-150 | Flow Control Valve | 1 | |
| A73001-1 | TEST CABLE - ELECTRONIC ENGINE CONTROL, JT9D-7R4D | 1 | |
| A73002 | WRENCH MAIN ENGINE CONTROL CF6-80C2 REMOVAL AND INSTALLATION | 1 | |
| A73002-10 | WRENCH - MAIN ENGINE CONTROL, CF6-80C2 REMOVAL/INSTALLATION | 7 | |
| A76001-1 | TEST FIXTURE - THRUST LEVER, CONTROL STAND | 1 | |
| A77001-1 | TEST BOX - POWER SUPPLY, ELECTRONIC ENGINE CONTROL MONITOR | 1 | |
| A77002-1 | TEST BOX - DISPLAY BOARD, ELECTRONIC ENGINE CONTROL MONITOR | 1 | |
| A78012-1 | WRENCH - CROWFOOT, TUBING NUT, FLOW CONTROL, THRUST REVERSER | 1 | |
| A80049-65 | ASSEMBLY - LOCK, FLIGHT CONTROLS | 1 | |
| AA95-9511 | AUDIO CONTROL | 1 | |
| AAU311 | FAN CONTROL RELAY TRAINER | 1 | |
| AAU3610 | ENGINE CONTROL FUNDAMENTALS | 1 | |
| AAU3620 | ENGINE CONTROL SYS OPS | 1 | |
| AAU3630 | ENGINE CONTROL DIAG FUNDA | 1 | |
| AB27001-J1X | PITCH TRIM CONTROL LOCKING | 1 | |
| AB27001-N1W | PIN,RIGGING-RUDDER CONTROL | 1 | |
| AB27001-QX1 | PITCH TRIM CONTROL LOCKING | 1 | |
| AB27001-T4W | RIGGING PIN - THS MECHANICAL CONTROL | 1 | |
| AB27001-VQ1 | PITCH TRIM CONTROL LOCKING | 1 | |
| AB27001-VR2 | BRACKET,TENSION REGULATOR-RUDDER CONTROL | 1 | |
| AB27001-VV7 | WRENCH - AILERON SERVO CONTROL ADJUSTMENT | 1 | |
| AB27001-VX9 | HOLDING WRENCH - AILERON SERVOCONTROL ADJUSTMENT | 1 | |
| AB3000 | Controller Module for RF80-K interface | 3 | |
| ABC36-3DM | POWER-CONTROL SOURCE | 1 | |
| AC10302 | 1/2IN CONTROL FLARED END BRUSH | 1 | |
| AC10306 | 3/4IN CONTROL FLARED END BRUSH | 1 | |
| AC21862000 | STEERING CONTROL UNIT | 1 | |
| AC21900100 | CONTROL-UNIT FOR THE ELECTRO-HYDRAULIC BLOCK | 1 | |
| AC21908000 | OUTILLAGE DE CONTROLE | 1 | |
| AC71-48 | CONTROL BUTTON | 1 | |
| ACE HCU-1500 | ACE HCU-1500;ACE HCU1500 Controller Chassis | 1 | |
| ACM-300 | FLIGHT CONTROL CABLE TENSION | 6 | |
| ACM-600 | FLIGHT CONTROL CABLE TENSION | 6 | |
| ACP2788 | AUDIO CONTROL PANEL | 1 | |
| ACP2788AE01 | AUDIO CONTROL PANEL | 1 | |
| ACP2788AF | AUDIO CONTROL PANEL SATCOM VERSION | 1 | |
| ACP2788AF01 | ACP-AUDIO CONTROL | 1 | |
| ACS200-TS | TEST SET, ENVIRO CONTROL SYSTEM | 1 | |
| ACS57001 | ADJUSTABLE SLINGING BEAM, WING, FLIGHT CONTROLS | 1 | |
| ACT-1-30P5321150-501 | CONTROL WHEEL CHECKING TOOL | 1 | |
| AD32439-1 | CONTROL VALVE ASSY | 1 | |
| AD32439-14 | DESCRIPTION: CONTROL VALVE | 1 | |
| AD37525-1 | TEST RIG CONTROL | 1 | |
| AD42561-1 | SWITCH BOX - AMS CONTROLLER LOADING | 1 | |
| AD42591-1 | CABLE - SWITCH BOX J1 TO CONTROLLER CARDS P18 / P25 | 1 | |
| AD43003 | PRESSURE CONTROLLER TEST SET | 1 | |
| AD5600 | SWITCHING CONTROL MAINFRAME | 1 | |
| ADA767-612 | ADA767-612 (AIR DATA CALIBRATOR (CONTROL TOOL)) | 4 | |
| ADK941403W | CONTROL BOARD | 1 | |
| ADSE-712 | Altitude Controller Leak Tester | 1 | |
| ADTS-0450 | REMOTE CONTROL UNIT | 1 | |
| ADTS-3300-0450 | ADTS REMOTE CONTROL UNIT | 1 | |
| ADTS405-1728-37-MO | Druck / GE Sensing HandHeld Remote Control for DPS500 and ADTS405F | 1 | |
| ADWS-HM | SPRAYING UNIT, CORROSION CONTROL | 1 | |
| AE1602A12-T400 | METALLIC GRID CONTROL TOOL | 1 | |
| AE1602A12-T410 | METALLIC GRID CONTROL TOOL | 1 | |
| AE1602A12T400 | METALLIC GRID CONTROL TOOL | 1 | |
| AE1602A12T410 | METALLIC GRID CONTROL TOOL | 1 | |
| AE894115Z | RAT FLOW CONTROL TEST KIT | 1 | |
| AE89415Z | FLOW CONTROL TEST - RAT | 2 | |
| AE9415Z | RAT- FLOW CONTROL TEST KIT | 1 | |
| AGE 00387-401 | PROTRACTOR CONTROL SURFACE DEFLECTION | 9 | |
| AGE 00895-401 | GAUGE SETTING RUDDER NEUTRAL POSITION CONTROL SURFACE BACKLASH CALCULATION SOFTWARE | 10 | |
| AGE 01500-203 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE | 1 | |
| AGE-00053-001 | wrench reconnect ail/elev controls | 1 | |
| AGE-00111-401 | Control Box Adjustment Caliper | 1 | |
| AGE-00111-403 | Control Box Adjustment Caliper | 1 | |
| AGE-00207-401 | Door control adjustment device | 1 | |
| AGE-00217-801 | Control lever microswitches adjustment/test kit | 1 | |
| AGE-00233-403 | KIT - RIGGING PINS, FLIGHT CONTROLS | 9 | |
| AGE-00387-401 | Protractor - Control Surface Deflection | 9 | |
| AGE-00466-403 | BALANCER - CONTROL SURFACES | 4 | |
| AGE-00552-401 | CONTROL STAND | 5 | |
| AGE-00708-401 | HOLDER - CONTROL STAND | 6 | |
| AGE-00994-401 | KIT - BUSHING REPL, CONTROL SURFACE | 4 | |
| AGE-01106-401 | TOOL - SLAT CONTROL LEVER LOCKING | 8 | |
| AGE-01106-401-AZL | TOOL-SLAT CONTROL LEVER LOCKING | 1 | |
| AGE-01254-401 | CLIP, CABLE TENSION CONTROL | 5 | |
| AGE-01411-401 | RIGGING PINS, FLIGHT CONTROLS - SET | 1 | |
| AGE-01411-403 | RIGGING PINS, FLIGHT CONTROLS - SET | 2 | |
| AGE-01500-202 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE | 1 | |
| AGE-01500-203 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE | 1 | |
| AGE-01619-401 | PIN-RIGGING CONTROL YOKE | 1 | |
| AGE-01622-403 | PIN-RIGGING CONTROL COLUMN | 1 | |
| AGE-02532-401 | RIGGING PINS, FLIGHT CONTROLS - SET | 1 | |
| AGE-03787-401 | PIN, RIGGING-CONTROL LEVEL | 1 | |
| AGE-03814-401 | CONTROL-SURFACE BALANCER ASSEMBLIES | 3 | |
| AGE-03841-401 | RIGGING PINS, FLIGHT CONTROLS - SET | 9 | |
| AGE-04248-401 | TEST SET - CONTROL STAND MICROSWITCHES | 1 | |
| AGE-04264-401 | CLIP, CABLE TENSION CONTROL | 11 | |
| AGE-04265-403 | RIGGING PINS, FLIGHT CONTROLS - SET | 10 | |
| AGE-04268-401 | TEST SET - CONTROL STAND MICROSWITCHES | 2 | |
| AGE-04276-403 | BALANCER SUPPORT-CONTROL SURFACE | 1 | |
| AGE-04715-401 | SET - BALANCER, CONTROL SURFACES | 3 | |
| AGE-04780-401 | SET - LOCKING CLAMP, CONTROL SURFACES | 4 | |
| AGE-05122-401 | PROTRACTOR - DE-FLECTION, CONTROL SURFACE | 2 | |
| AGE-05271-401 | SET - LOCKING CLAMP, CONTROL SURFACES | 1 | |
| AGE-05315-403 | FIXTURE - RIGGING AND MAINTENANCE INTERFACE, FLIGHT CONTROL SYSTEM | 1 | |
| AGE-05342-201 | SOFTWARE - BACKLASH CALCULATION, CONTROL SURFACE | 1 | |
| AGE-05342-204 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE - GSE064 | 1 | |
| AGE-05468-401 | Balancer Set Control Surface | 2 | |
| AGE-05468-401-REVA | BALANCER SET CONTROL SURFACE | 1 | |
| AGE-05564-401 | CONTROL CABLES TENSION ADJUSTING CLIP | 1 | |
| AGE-11212 | FLOW CONTROL UNIT | 2 | |
| AGE-12033 | CONTROLARM ASS'Y TOOL | 2 | |
| AGE00233-403 | KIT - RIGGING PINS, FLIGHT CONTROLS | 9 | |
| AGE00708-401 | HOLDER CONTROL STAND | 6 | |
| AGE00994-401 | KIT-BUSHING REPLACE CONTROL SURFACES EMB195 | 4 | |
| AGE01106-401 | TOOL-SLAT CONTROL LEVER LOCKING | 8 | |
| AGE01254-401 | CLIP, CONTROL CABLE TENSION ADJ(GSE229) | 5 | |
| AGE04265-403 | KIT RIGGING PINS, FLIGHT CONTROLS | 10 | |
| AGE11212 | FLOW CONTROL TEST - RAT | 2 | |
| AGE12033 | CONTROL ARM | 2 | |
| AGE13314 | LEFT - RIGHT INTEGRATED CONTROL INSTALLATION FIXTURE | 2 | |
| AGE13314A | LEFT - RIGHT INTEGRATED CONTROL INSTALLATION FIXTURE | 1 | |
| AGE13316 | INSTALLATION FIXTURE EMERGENCY INTEGRATION CONTROL ASSY | 3 | |
| AGE14582 | (TWO-SWITCH) COMMUNICATIONS CABLE (SLAT/FLAP CONTROLLER FIELD SOFTWARE TOOL) | 1 | |
| AGE17082 | GENERATOR CONTROL UNIT EXTENDER HARNESS | 1 | |
| AGE17083 | BUS POWER CONTROL UNIT EXTENDER HARNESS | 1 | |
| AGE17140-2 | LEFT AND RIGHT BUS POWER CONTROL UNIT OVERLAY | 1 | |
| AGE17140-3 | LEFT 2, RIGHT 2 GENERATOR CONTROL UNIT OVERLAY | 1 | |
| AGE19054 | PECS PUMP MOTOR CONTROLLER | 1 | |
| AGE19055 | CONTROLLER: DISLOGING DEVICE, | 2 | |
| AGE70021 | VALVE, CONTROL | 1 | |
| AGEâ?00387â?401 | CONTROL SURFACE DETTECTT PROCTRACTOR | 9 | |
| AGEâ?00552â?401 | CONTROL STAND MOCROWITCH TEST SET | 5 | |
| AGSCRJ700/200 | CONTROLOTRON FLOWMETER KIT | 4 | |
| AILER0NRIGPIN | ATR AILERON CONTROL COLUMN PIN | 1 | |
| AJ65B80482 | HOLDING FIXTURE - QUADRANT ASSEMBLY, ELEVATOR CONTROL | 1 | |
| AJ65B80985 | ASSEMBLY JIG - CLUTCH PACK ASSEMBLY, AUTOTHROTTLE ENGINE CONTROL | 1 | |
| AJ65B81667 | ASSEMBLY JIG - CONTROL ASSEMBLY, TRAILING EDGE FLAP DRIVE, INBOARD AND OUTBOARD | 1 | |
| AJ65B82640-1 | ASSEMBLY JIG - MICROSWITCH ASSY., THROTTLE CONTROL STAND | 1 | |
| AKUKUT | COM-15056 DEPTH CONTROLLED CUTTER | 1 | |
| AKUKUT1 | DEPTH CONTROLLED CUTTER | 1 | |
| AL4806-3A | POSITIO CONTROL INDICATOR | 1 | |
| AM-2389-3 | CONTAINER,FADEC CONTROL UNIT | 1 | |
| AMA4001 | SAFETY EQUIPMENT, OFF-WING ESCAPE SYSTEM (CONTROL TOOL) | 1 | |
| AN4-7A | BOLT FOR FLIGHT CONTROLS | 26 | |
| AP-579526 | GSE CONTROL BOARD 4400 | 1 | |
| AP-579526-44 | CONTROL BOARD | 1 | |
| APC 401 | Power Control | 1 | |
| API85530 | TIME CONTROLLER | 1 | |
| APS-100 | VOLTAGE CONTROLLERS | 1 | |
| APV7830-00-0G | LOCK-OUT PIN - HYDRAULIC CONTROL UNIT | 1 | |
| AR4709-11 | COCKPIT DOOR LOCKING CONTROL UNIT | 1 | |
| AR4709-13 | COCKPIT DOOR LOCKING CONTROL UNIT | 1 | |
| AR4737-1 | COCKPIT DOOR LOCKING SYSTEM CONTROL UNIT PROGRAMMER | 1 | |
| AS-52-0052 | RCD CONTROL SYSTEM TEST PANEL | 1 | |
| AS3492-01 | Gasket, Fuel Control | 1 | |
| ASNE0468-05 | CONTROL KNOB | 2 | |
| AT3678 | CONTROL BOX | 1 | |
| AT406B13 | CONTROL LEVER PIN | 1 | |
| AT450DP-10 | AIR CONTROLLER | 1 | |
| ATC 601 | AIR TRAFFIC CONTROL (ATC) TEST SET-ATC-600A / ATC 601 | 7 | |
| ATC-600A | AIR TRAFFIC CONTROL (ATC) TEST SET-ATC-600A / ATC 601 | 23 | |
| ATI520CFC | FOOT CONTROL | 1 | |
| AVIA-98V27801000000 | CONTROL LEVER FLAP SLAT | 1 | |
| AW-98D27803500001 | Zero Locking Tool – Flap/Slat Control Lever -Airbus | 1 | |
| AW-98S57605002000 | ATR FLIGHT CONTROL BALANCING JIG | 1 | |
| Almen Gage TSP-3 (FPG-1000) | SHOT PEENING CONTROL (ALMEN GAGE) | 1 | |
| B-18RF6 | CONTROL VALVE | 1 | |
| B-18RF8 | FLOW CONTROL VALVE 18 SERIES B-18RF8 | 1 | |
| B-18VF8 | VALVE-FLOW CONTROL | 3 | |
| B-1KS4-SC11 | FLOW CONTROL VALVE | 1 | |
| B-1RF4 | FLOW CONTROL VALVES | 1 | |
| B18VF8 | VALVE-FLOW CONTROL | 3 | |
| B19319-0 | FLOW CONTROL VALVE 18 SERIES B-18RF8 | 4 | |
| B2 | Grease Pump Control Guns (Diameter x width: Booster Gun) (Z-swivel: No) (Add to cart: Contact us to order) | 6 | |
| B2-01 | Grease Pump Control Guns (Diameter x width: Booster Gun) (Z-swivel: No) (Add to cart: Contact us to order) (Diameter x width: Booster Gun) (Z-swivel: Yes) (Add to cart: Add To Cart) | 1 | |
| B27009-12 | LOCK-OUT EQUIPMENT - POWER CONTROL ACTUATOR, ELEVATOR | 21 | |
| B27009-2 | Lock assy，control | 8 | |
| B27009-3 | LOCK, CONTROL | 9 | |
| B27013-19 | LOCK EQUIPMENT - RUDDER POWER CONTROL UNIT | 8 | |
| B27013-20 | LOCK EQUIPMENT - RUDDER POWER CONTROL UNIT | 13 | |
| B27018 | BREAKOUT BOX - POWER SUPPLY, FLAP/SLAT ELECTRONIC UNIT/ CONTROL SYSTEM ELECTRONIC UNIT FSEU/CSEU | 1 | |
| B27018-19 | BREAKOUT BOX - POWER SUPPLY, FLAP/SLAT ELECTRONICS UNIT/CONTROL SYSTEM ELECTRONICS UNIT (FSEU/CSEU) | 1 | |
| B27033-1 | TORQUE ADAPTER - AILERON POWER CONTROL UNIT INSTALLATION | 8 | |
| B27039 | RIGGING EQPT -0 CONTROL INSTL, ELEV & STAB TRIM | 1 | |
| B27039-13 | RIGGING EQPT -0 CONTROL INSTL | 4 | |
| B27039-28 | RIGGING EQUIPMENT - ELEVATOR AND STABILIZER TRIM SYSTEMS CONTROL INSTALLATION | 9 | |
| B27039-29 | RIGGING CONTROLS STAB TRIM TOOL | 1 | |
| B27039-8 | Rigging Eqpt - Control Instl | 1 | |
| B27040-1 | RIGGING BUSHING - ELEVATOR CONTROL CRANK AND SHAFT ASSEMBLY | 1 | |
| B27044-1 | CONTROL COLUMN LOCK | 1 | |
| B27045-12 | GAGE RUDDER CONTROL.. | 2 | |
| B27046-6 | SWAGING TOOL - RUDDER CONTROLS RATIO CHANGER SHEAR PIN | 5 | |
| B27049 | RIGGING BEAM -0 CONTROL WHEELS | 1 | |
| B27049-1 | RIGGING BEAM - CONTROL WHEELS | 9 | |
| B27054-3 | AILERON CONTROL LOCK | 1 | |
| B27060 | SPRING REMOVAL/INSTL SET-DECENTERING,ELEVATOR CONTROLS | 1 | |
| B27060-1 | SPRING REMOVAL/INSTL SET - DECENTERING, ELEVATOR CONTROLS | 9 | |
| B27068 | TEST EQPT -0 ELEVATOR CONTROL, NEUTRAL SHIFT | 1 | |
| B27068-1 | TEST EQUIPMENT - ELEVATOR CONTROL NEUTRAL SHIFT SPRING | 1 | |
| B27079 | TEST BOX - POWER SUPPLY CONTROL SYSTEM ELECTRONICS UNIT (CSEU) | 1 | |
| B27079-19 | TEST BOX - POWER SUPPLY, CONTROL SYSTEM ELECTRONICS UNIT (CSEU) 27-00-15 | 1 | |
| B301-460-001 | TRI-STATE INTERFACE CONTROL BOX | 1 | |
| B301-460-050 | TRI-STATE INTERFACE CONTROL BOX | 1 | |
| B32061 | SPRING COMPRESSION EQPT -0 NWS CONTROL | 1 | |
| B32061-1 | SPRING COMPRESSION EQUIPMENT - NOSE WHEEL STEERING CONTROL | 1 | |
| B34001 | TEST FIXTURE - POWER SUPPLY CARDS/CONTROL PANEL ASSEMBLY | 1 | |
| B34001-1 | TEST FIXTURE - POWER SUPPLY CARDS/CONTROL PANEL ASSEMBLY | 1 | |
| B692 / 229 | Aircraft communication Control System | 1 | |
| B76003 | RIGGING EQUIPMENT-ENGINE CONTROL SYSTEM | 1 | |
| B76003-1 | RIGGING EQUIPMENT - ENGINE CONTROL SYSTEM | 7 | |
| B76004-1 | ADAPTER - THRUST CONTROL INNER SHAFT 76-10-03 | 1 | |
| BA-20-3DC | BEARING ANALYZER WHEEL CONTROL | 1 | |
| BA225030 | CRANEW REMOTE CONTROL BATTERY (BA225030 (6V / 1500MAH) | 1 | |
| BA53-02 | FLIGHT CONTROL ELECTRONICS BATTERY | 1 | |
| BACC14AD06JL | Cap - PPRV primary controller | 9 | |
| BAT-ACM-600 | FLIGHT CONTROL CABLE TENSION | 1 | |
| BC849A6010-000 | TEST SET,FUEL CONTROL | 1 | |
| BCFDE8491N | TEST SET,FUEL CONTROL | 1 | |
| BCT00101 | TEST MODULE CONTROL UNIT | 1 | |
| BE539-25 | CAP - PPRV SECONDARY CONTROLLER AND INTEGRAL SENSE | 1 | |
| BF521A | UNIT, AIR CONTROL, 75CFM | 1 | |
| BH3884-40 | Controlled Heat Source | 5 | |
| BH4016A1 | FLOW CONTROL TEST - RAT | 1 | |
| BH4016A3 | FLOW CONTROL TEST - RAT | 1 | |
| BK878B | LOOP CONTROLLER | 2 | |
| BK879B | LOOP CONTROLLER | 5 | |
| BL47682 | FITTING SUPPORT SERVOCONTROL | 1 | |
| BL49588 | FIXTURE-RIGGING, RUDDER SERVO CONTROL | 1 | |
| BL49629 | DIAL INDICATOR SUPPORT SERVO CONTROL TEST | 1 | |
| BL49630 | DIAL INDICATOR SUPPORT SERVO CONTROL TEST | 1 | |
| BL52547 | HYDRAULIC TEST BENCH SERVO CONTROL TEST | 1 | |
| BL52549 | HYDRAULIC TEST BENCH SERVO CONTROL TEST | 1 | |
| BL52550 | TEST FIXTURE FOR SERVO CONTROL | 1 | |
| BL52551 | TEST FOR SERVO CONTROL | 1 | |
| BL52551-100 | TEST FOR SERVO CONTROL | 1 | |
| BLC5159 | GENERATOR CONTROL UNIT | 1 | |
| BM90197 | ELECTRONICCONTROLDEVICE | 1 | |
| BO5030K | 5" RANDOM ORBIT SANDER WITH VARIABLE SPEED CONTROL FOR SMOOTH FINISHES. | 1 | |
| BR59-101 | FLIGHT CONTROLS RIGGING SET 4920-01-112-5002-BP | 1 | |
| BT-06K | Battery for crane remote control 4,8V 600 mA/H | 1 | |
| BTR-55097 | AOA HEATER CONTROL BOX | 1 | |
| BUTR 1-2 | FUEL QTY/FLOW CONTROL UNIT | 1 | |
| C0027 | LOCK, CONTROL COLUMN | 1 | |
| C0031 | Drill Rig Control Column | 1 | |
| C12850AC03 | FCU-FLIGHT CONTROL UNIT | 1 | |
| C12850BC02 | FCU-FLIGHT CONTROL UNIT | 1 | |
| C181-A279CC | AUDIO CONTROL SWITCH | 1 | |
| C20001-1 | Roller Swage - Bearing Installation, Elevator Tab Control Crank Assembly | 2 | |
| C21003-160 | ADAPTER AND CONTROL KIT | 10 | |
| C21003-4 | CONTROL ASSY | 1 | |
| C21003-73 | CONTROL ASSY | 1 | |
| C21003-74 | CONTROL ASSY | 3 | |
| C21003-78 | Control Assy | 1 | |
| C21003-79 | Control Assy | 1 | |
| C21013-1 | TEST EQUIPMENT - STANDBY TEMPERATURE CONTROL VALVE (STCV) | 2 | |
| C22005-25 | ASSEMBLY - CABLE, FLIGHT CONTROL COMPUTER AND/OR SYSTEM TESTINGDIGITAL FLIGHT CONTROL | 7 | |
| C22005-32 | ASSEMBLY - CABLE, FLIGHT CONTROL COMPUTER AND/OR | 5 | |
| C22646 | USED TO LOCK THE INTERPHONE BOX CONTROL LEVER IN TOWING POSITION AND TO CUT OFF HYDRAULIC POWER SUPPLY TO ELECTROVALVE. | 13 | |
| C23001 | Test Box - Attendant Handset Integrated Handset Controller, Printed Wire Assembly | 1 | |
| C24736000 | HYDRAULIC CONTROL UNIT | 1 | |
| C24736001-3 | HYDRAULIC CONTROL UNIT | 1 | |
| C26007 | Test Equipment - Compartment Overheat Detection Control. M237 Inline | 1 | |
| C26007-72 | COMPARTMENT OVERHEAT DETECTION CONTROL UNIT | 11 | |
| C26007-78 | TEST EQUIPMENT-COMPARTMENT OVERHEAT DETECTION CONTROL | 5 | |
| C27001-42 | LOCK ASSY - FLIGHT CONTROLS B737 | 15 | |
| C27001-51 | LOCK ASSY - FLIGHT CONTROLS B737 | 15 | |
| C27006-12 | Test Equipment - Cutout Switch, Stabilizer Trim Control | 1 | |
| C27006-22 | Test Equipment - Cutout Switch, Stabilizer Trim Control | 1 | |
| C27006-42 | Test Equipment - Cutout Switch, Stabilizer Trim Control | 1 | |
| C27006-47 | Test Equipment - Cutout Switch, Stabilizer Trim Control | 1 | |
| C27006-48 | Test Equipment - Cutout Switch, Stabilizer Trim Control | 2 | |
| C27006-95 | TEST EQUIPMENT - CUTOUT SWITCH, STABILIZER TRIM CONTROL | 1 | |
| C27007-17 | TEST BOX - CUTOUT SWITCH STABILIZER TRIM CONTROL | 1 | |
| C27007-21 | Test Box - Cutout Switch, Stabilizer Trim Control (Line Maintenance) | 7 | |
| C27007-26 | Test Box - Cutout Switch, Stabilizer Trim Control (Line Maintenance) | 4 | |
| C27007-27 | STABILIZER TRIM CONTROL | 1 | |
| C27007-31 | Test Box - Cutout Switch, Stabilizer Trim Control (Line Maintenance) | 19 | |
| C27007-31-REVE | **TEST BOX-CUTOUT SWITCH STAB TRIM CONTROL | 2 | |
| C27007-32 | TEST CABLE ADAPTER - TRIM CONTROL TESTER | 5 | |
| C27007-46 | TEST BOX - CUTOUT SWITCH, STABILIZER TRIM CONTROL (LINE MAINTENANCE) | 10 | |
| C27008 | LOCK EQPT ACTUATION CONTROL FLAP | 1 | |
| C27008-14 | CONTROL HANDLE LOCKOUT | 4 | |
| C27008-2 | Lock Actuation Control, Flap | 2 | |
| C27008-20 | Lock Equipment - Actuation Control, Flap | 10 | |
| C27008-22 | Lock Equipment - Actuation Control, Flap | 17 | |
| C27008-42 | LOCK EQUIPMENT - ACTUATION CONTROL, FLAP | 1 | |
| C27008-5 | FLAP CONTROL LOCK | 1 | |
| C27013 | Test Box -Auxiliary Power Control Unit. Digital Stall Warning Computer | 1 | |
| C27025-1 | Torque Wrench Equipment -Rudder Power Control Unit Attachment | 11 | |
| C27034-1 | ELEVATOR CONTROL SURFACE SLING | 19 | |
| C27036-1 | Support Set - Forward Elevator Control Quadrant | 8 | |
| C27037-1 | Assembly/Disassembly Equipment -Flight Spoiler Power Control Unit | 1 | |
| C27042-1 | Wrench - Torque Equipment, Rudder Power Control Unit Attachment | 15 | |
| C27049-1 | Removal/Installation Equipment - Rudder Power Control Unit | 5 | |
| C27049-36 | Removal/Installation Equipment - Rudder Power Control Unit | 13 | |
| C27057-1 | LOCK - RUDDER POWER CONTROL UNIT (PCU) REMOVED | 15 | |
| C27057-2 | RUDDER POWER CONTROL UNIT LOCK ASSEMBLY | 2 | |
| C27060 | ADAPTER EQPT. CONTROL WHEEL | 1 | |
| C27060-1 | Adapter Equipment - Control Wheel | 23 | |
| C27060-22 | ADAPTER EQUIPMENT - CONTROL WHEEL | 7 | |
| C27061-1 | Adapter - Wrench, Flight Spoiler Actuator Power Control Unit | 6 | |
| C27063-1 | Support Clamp -Forward Elevator Control Quadrant | 2 | |
| C27066-1 | LOCK EQUIPMENT - AILERON/ELEVATOR POWER CONTROL UNIT INPUT ROD (POGO) | 25 | |
| C27073-1 | Test Equipment - Quadrant Assembly, Elevator Controls | 1 | |
| C27077-1 | Test Equipment - Quadrant Assembly, Aileron Control | 2 | |
| C27085 | REMjINSTL EQPT. TAB MECHANISM ASSY ELEVATOR CONTROL | 1 | |
| C27085-1 | Removal/Installation Equipment - Tab Mechanism Assembly, Elevator Control | 18 | |
| C27086-1 | REMOVAL/INSTALLATION EQUIPMENT - SPRING, TAB MECHANISM ASSEMBLY, ELEVATOR CONTROL | 13 | |
| C27093-1 | FUNCTIONAL TEST - TRANSFER MECHANISM, AILERON CONTROL | 1 | |
| C27093-2 | FUNCTIONAL TEST - TRANSFER MECHANISM, AILERON CONTROL | 1 | |
| C27093-3 | FUNCTIONAL TEST - TRANSFER MECHANISM, AILERON CONTROL | 1 | |
| C27097-1 | CONTROL WHEEL STRAIGHT EDGE | 7 | |
| C27105-1 | RIGGING EQUIPMENT - SPEED BRAKE CONTROL BRAKE ASSEMBLY | 1 | |
| C277007-46 | BOX – TEST, CUTOUT SWITCH, TRIM CONTROL. | 1 | |
| C28011 | Test Box - P5-2, Fuel Control Module Assembly | 1 | |
| C28011-1 | TEST BOX - P5-2, FUEL CONTROL MODULE | 1 | |
| C29002-1 | RUDDER POWER CONTROL UNIT | 1 | |
| C29002-17 | Test Equipment - Rudder Power Control Unit | 19 | |
| C29002-17R | TEST EQPT. RUDDER POWER CONTROL UNIT | 1 | |
| C29002-17 | TEST BOX RUDDER POWER CONTROL UNIT | 19 | |
| C32001-1 | Test Box -Engine Speed Detector And Landing Gear Transfer Valve Control Cards | 1 | |
| C32027-1 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-2 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 2 | |
| C32027-3 | Holding Fixture Equipment - Functional Test, Landing Gear Control Lever | 3 | |
| C34001 | Adapter Assembly -Smiths (Lear-Siegler) Flight Management Computer (Fmc)/Control Display Unit (Cdu). Boeing Automatic Test Station (Ats). | 1 | |
| C34011 | Adapter Equipment -Honeywell Mode Control Panel (Mcp) And Flight Control Computer (Fcc) To Boeing Automatic Test Station (Ats-182) | 1 | |
| C34011-1 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | 1 | |
| C34011-11 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | 1 | |
| C34011-21 | ADAPTER EQUIPMENT - HONEYWELL MODE CONTROL | 1 | |
| C35-26 | M/C CONTROL & CORD ASSY | 11 | |
| C36001-113 | Control assy | 1 | |
| C36002 | DISPATCH KIT PRECOOLER CONTROL VALVE | 1 | |
| C36002-1 | Dispatch Kit - Precooler Control Valve | 12 | |
| C36006 | Test Equipment - Air Supply Control System | 1 | |
| C36006-1 | TEST EQUIPMENT - AIR SUPPLY CONTROL SYSTEM | 7 | |
| C47001-73 | CONTROL BOX ASSEMBLY | 1 | |
| C473 | CHART FOR TEMP. & HUMID CONTROL | 1 | |
| C49002 | Test Box -Auxiliary Power Unit Control Unit | 1 | |
| C49002-1 | Test Box - APU Control Unit | 1 | |
| C49002-36 | TEST BOX APU CONTROL UNIT | 1 | |
| C52001-1 | SPRING - LOADING CONTROL EQUIPMENT | 4 | |
| C52004 | SPRING-LOADING CONTROL EQPT | 1 | |
| C52004-1 | Spring - Loading Control Equipment | 11 | |
| C52004-1-M | SPRING -0 LOADING CONTROL EQPT | 1 | |
| C621G4951101 | CONTROLE DOUILLE PALE | 1 | |
| C670G4101105 | TOOL KIT FLIGHT CONTROL ADJUSTMENT | 1 | |
| C6747 | WRENCH-AILERON SERVO CONTROL ELECTRICAL CONNECTOR | 1 | |
| C71028 | Specification - Interface Control, CFM56-7 Bootstrap/Ground Handling | 2 | |
| C73001-1 | Remove/Install Adapter - CFM56-3 Fuel Pump and Main Eng.Control | 1 | |
| C73002-1 | TESTER CONTROL MODUL | 1 | |
| C75002-26 | HAND TOOL SET- CONTROL STAND, DISASSEMBLY/ASSEMBLY | 1 | |
| C76001-10 | LIGHT CONTROL | 19 | |
| C76001-2 | MAIN ENGINE CONTROL PIN | 8 | |
| C76002 | HAND TOOL SET-CONTROL STAND,DISASSEMBLY/ASSEMBLY | 1 | |
| C76002-1 | UNIT CONTROLSTANDEFIS DISMANTLE/ASSEMBLE | 3 | |
| C76002-14 | Control Stand Equipment (6ea/kit) | 2 | |
| C76002-20 | TOOL SET - CONTROL S | 4 | |
| C76002-21 | CONTROL SHAFT NUT WRENCH | 1 | |
| C76002-22 | RIGHT CONTROL SHAFT WRENCH | 1 | |
| C76002-24 | Hand Tool Set - Control Stand, Disassembly/Assembly | 6 | |
| C76002-25 | Hand Tool Set - Control Stand, Disassembly/Assembly | 6 | |
| C76002-26 | Hand Tool Set - Control Stand, Disassembly/Assembly | 12 | |
| C76002-30 | Control Shaft Nut Socket | 4 | |
| C76002-35 | HAND TOOL SET - CONTROL STAND, DISASSEMBLY/ASSEMBLY | 1 | |
| C76002-6 | RIGHT CONTROL SHAFT WRENCH | 2 | |
| C76002-8 | CONTROL SHAFT NUT WRENCH | 2 | |
| C78001-13 | CONTROLES PERIODIGUES (HOLD OPEN ROD - THRUST REVERSER) | 12 | |
| C78004-2 | LOCK PIN FOR CONTROL VALVE MODULE. | 26 | |
| C8 | AIRCRAFT� CONTROL CABLE TENSIOMETERS | 5 | |
| C9 | AIRCRAFT� CONTROL CABLE TENSIOMETERS | 3 | |
| C992142-50 | CABLE CONTROL RT7000 | 1 | |
| CAU2583AB03 | REMOTE CONTROL AUDIO UNIT | 1 | |
| CB03902 | GENERATOR CONTROL UNIT | 1 | |
| CB03903 | GENERATOR CONTROL UNIT | 1 | |
| CB38823-002 | MMEL SERVOCONTROL SPOILER COLLAR | 1 | |
| CC02M1IAO | CONTROL DESK | 1 | |
| CC02M1SA0 | CONTROL PANEL CC02M1SA0 (63A 400V IEC/CEE 6H 5POL STD+COVER ASSEMBLY), HYDRO | 1 | |
| CCSC2750-01 | FLAP CONTROL TEST BOX | 2 | |
| CCU-100-1 | Universal Control Console Kit | 1 | |
| CCY31108 | RL35R W/VOICE CONTROL | 1 | |
| CDZ777MK3 | CONTROLLER HEAT | 1 | |
| CEM1AC11253 | CONTROL ASSEMBLY | 1 | |
| CF-20G0255VM | MAINTENANCE LAPTOP (CONTROL TOOL) | 1 | |
| CF0199-000 | TE CONNECTIVITY CF0199-000 IR-1759 INFRARED HEATING TOOL, ED-7-001-MK4-230V-50HZ, CONTROL BOX, 230V | 1 | |
| CF65B80836 | CHECK FIXTURE - SPOILER CONTROL, DIFFERENTIAL MECHANISM | 1 | |
| CF65B82106 | SPRING CHECKING FIXTURE - LOAD LIMITER ASSEMBLY, AILERON CONTROL | 1 | |
| CG9000055-0001 | CONTROL SURFACES BUSHING R/I KIT | 1 | |
| CG9270002-0001 | FLIGHT CONTROLS RIGGING KIT | 1 | |
| CG9270002-0002 | FLIGHT CONTROLS RIGGING KIT | 1 | |
| CG9291301-0001 | CONTROLOTON FLOWMETER KIT | 1 | |
| CG9321201-0007 | CONTROL PANEL MLG ASSY | 1 | |
| CH1018-032 | RIGGING PIN-SLAT CONTROL UNIT | 1 | |
| CH140366 | JAMMING SIMULATION PIN - THS ACTUATOR CONTROL VALVE | 1 | |
| CH47-110 | FLIGHT CONTROL COOLING FAN INLET COVER | 1 | |
| CH723435 | PIN - LOCKING THS ACTUATOR MECH. CONTROL | 1 | |
| CJ2000S | PULLER SET MASTER W TL CONTROL | 1 | |
| CJM 127-007 | BEAR UPLOCK EMERGENY CONTROL TEST TOOL | 1 | |
| CJMD827-002 | FLIGHT CONTROL FREEPLAY KIT | 2 | |
| CJMD827-005 | FLIGHT CONTROL RIG PIN | 2 | |
| CKSCC14015 | CONTROL CABLE | 1 | |
| CKSSN674C | WIRE CONTROL | 1 | |
| CKSSN774A | WIRE CONTROL | 1 | |
| CKSSN774U | WIRE FEED CONTROL CARD W/HEADR | 1 | |
| CL-2-C | FLIGHT CONTROL CABLE FEED THROUGH TRAILER | 1 | |
| CL2C | FLIGHT CONTROL CABLE FEED THROUGH TRAILER-CL2C | 1 | |
| CLFA01-92250-12304-101 | Bulon de control | 1 | |
| CLFA02-92250-12304-101 | Bulon de control | 1 | |
| CLRE-01-35-46100-0001 | GAUGE, CONTROL PEDALS | 1 | |
| CLRE-02-35-32001-0005 | TEMPLATE,CONTROL RI | 1 | |
| CLRE-02-35-46100-0001 | CONTROL WHEEL POSITION GAUGE | 1 | |
| CLRE-03-35-46100-0001 | CONTROL COLUMN SETTING GAGER | 1 | |
| CM1-B | High Speed Pressure Control Module | 1 | |
| COM-1565 | WRIST STRAP - ADJUSTABLE, CONDUCTIVE, STATIC CONTROL | 1 | |
| COM-8950 | TOOL, FUEL CONTROLLER, MAN S/O VALVE | 1 | |
| CON-4A | WEATHER RADAR CONTROL UNIT | 1 | |
| CONTROLCONCENTRATE4X5 | ECO STATICS - CONTROL CONCENTRATE 4X5 LITRES | 1 | |
| CP10-001 | RECTIFIER: SILICON,CONTROLLED, DEVICE | 2 | |
| CP18-135 | RECTIFIER: SILICON,CONTROLLED, SCREW TYPE FOR SMSR/MSR,H SINK | 2 | |
| CP30266-2 | CONTROL BOX | 1 | |
| CP30266/2 | CONTROL BOX | 1 | |
| CP30267-2 | REMOTE CONTROL BOX | 1 | |
| CP30267/2 | REMOTE CONTROL BOX | 1 | |
| CPAL30B | PRESSURE CONTROLLER 0/40 BAR | 1 | |
| CS-235-RC111 | KIT REGLAJE CONTROL FLAPS | 1 | |
| CS-235-RC117 | GAUGE - CONTROL PEDALS - SUPPORT EQUIPMENT AND TOOLS DATA | 1 | |
| CS-235-RC118 | FLIGHT CONTROL LOCKING | 1 | |
| CS-295-AG131-A | EQUIPO DE ANALISIS Y CONTROL DE LA VIBRACION DEL AVION CHAWICK VXP | 1 | |
| CS-295-RC114 | GAUGE CONTROL WHEEL | 1 | |
| CS-295-RC117 | GAUGE, CONTROL PEDALS | 1 | |
| CS-295-RC121 | GAUGE, CONTROL COLUMN | 1 | |
| CS-295-RC128 | MEDIDOR DE ESFUERZO CONTROL RUEDA | 1 | |
| CS-295-RC140 | ENGINE CONTROL RIGGING SET | 1 | |
| CS-295-RC141 | FLIGHT CONTROLS RIGGING KIT | 1 | |
| CS-295-RC144 | RIGGING FEELER GAGES, RUDDER, ELEVATOR AND ROLL CONTROL | 1 | |
| CS-710-587 | DUMMY CONTROL UNIT | 1 | |
| CS-H21-AG105CS-05B | Llave a panel control | 1 | |
| CS710-247 | MOTOR CONTROL PCB ASSEMBLY TOOL | 1 | |
| CS710-309 | CONTROL PCB ASSEMBLY TOOL | 1 | |
| CS900-1 | BAE SYSTEMS CONTROLS BATTERY CHARGER FOR BAE LRT (LOOP RESISTANCE TESTER) PN: CS900-1 | 2 | |
| CST-2820 | CONTROLEUR DE NIVEAU | 1 | |
| CT-010-30PWST E CFR-4AS-53000 | CONTROL WHEEL CHECKING TOOL | 1 | |
| CT29987 | CABLE-LOAD BANCK CONTROL | 1 | |
| CTECH1FR240A | 1/4" DRIVE FLEX-HEAD CONTROLTECH® INDUSTRIAL TORQUE WRENCH(1-20-FT-IB) | 1 | |
| CTECH2MR1200 | 3/8" DRIVE FIXED RATCHET HEAD DIGITAL, MICRO SIZE CONTROLTECH® TORQUE WRENCH (60-1,200 IN-LB; 6.8-135.6 N·M) SNAP ON | 2 | |
| CTFL9050-5 | CONTROL PANEL | 1 | |
| CTLAR-3 | CONTROL BOARD | 1 | |
| CTLAR-4 | CONTROL BOARD COVER | 1 | |
| CTLFD8850A-1 | CONTROL BOARD PART | 1 | |
| CTLNKCTRL | CONTROLTECH-LINK CONTROLLER | 1 | |
| CTLNKCTRL4 | CONTROLTECH LINK CONTROLLER 4X | 1 | |
| CTLNKHOST | CONTROL TECH LINK HOST SFTWARE | 1 | |
| CTS-700 | SELCAL CONTROL TOWER ENCODER - MOTOROLA | 8 | |
| CTS320E1A | Unit-flap control switching | 6 | |
| CTSG861-17 | CONTROL PANEL | 1 | |
| CTSG861-20 | TEMPERATURE CONTROL LABEL | 1 | |
| CU673C-7 | CONTROL UNIT | 2 | |
| CUTA1870104C | FLOW CONTROL ASSEMBLY | 5 | |
| CWP0001 | CONTROL WHEEL PROTRACTOR | 1 | |
| D - 393A5536P0001 | KIT,TOOL,MAINTENANCE (WITHOUT FOAM CONTROL) | 1 | |
| D025-1 | CONTROL TEST BENCH | 1 | |
| D045-228 | TEST,CONTROL | 1 | |
| D144-20-00 | CONTROL VALVE | 1 | |
| D144-20-000 | 3 WAY VALVE (CONTROL VALVE) | 1 | |
| D24001000 | VALVE-CONTROL PARKING BRA | 3 | |
| D24317-TL1 | A215-TYPE CONTROL UNIT | 1 | |
| D46350 | CONTROL EQPT | 4 | |
| D4D-2807-90-00-01 | FUEL CONTROL INDICATOR, LONG RANGE TANK | 1 | |
| D60210 | REMOTE CONTROL DISPLAY | 1 | |
| D60253 | Computer Controlled Air Data Test Set | 1 | |
| D60302 | TEST SET - AIR DATA COMPUTER CONTROLLED | 1 | |
| D60340 | COMPUTER CONTROLLER AIR DATA TEST S | 1 | |
| D60340MK | TEST SET - AIR DATA COMPUTER CONTROLLED (INCLUDES REMOTE CONTROL DISPLAY UNIT, POWER SUPPLY CABLE, PUMP AND ELECTRONICS BOX, AND P/S HOSES - (D60340MK IS THE BASE MODEL P/N) | 1 | |
| D60340MK00110 | TOOL: COMPUTER CONTROLLED | 1 | |
| D623P3001101 | ADJUSTING DEVICE ROTATING CONTROL ROADS | 1 | |
| D672P1051101 | RIGGING TOOL FENESTRON CONTROL | 1 | |
| D738-01-001 | CONTROL SWITCH LEFT ENGINE FOEL CONTROL | 1 | |
| D97G00-203 | REMOVABLE CONTROL LEVER | 1 | |
| DAP000172-01 | FAULT LOG OF BRAKE CONTROL UNIT (BCU) | 1 | |
| DAP00172-01 | FAULT LOG OF BRAKE CONTROL UNIT (BCU) | 1 | |
| DCM1677 | TESTER, LOOP CONTROLLER UPT36-00056 | 1 | |
| DCM1677-LCD-REVPROTO | PROTO VERSION OF OHDS LOOP TESTER LCD BRACKET LOOP CONTROLLER | 1 | |
| DCT880-80A-525V | THYRISTOR POWER CONTROLLER (2PHASES) | 1 | |
| DE8491N | TEST SET,FUEL CONTROL | 1 | |
| DF030-11 | SWITCH CONTROL BOX | 1 | |
| DFS33790-22 | OUTIL CONTROL | 3 | |
| DJ-737-7960-9L | HORIZONTAL STABILIZER TRIM CONTROL SYSTEM | 1 | |
| DMG-500 | FLIGHT CONTROL BACKLASH GAUGE (AMETEK) | 6 | |
| DO7010-28/1 | 2 WIRE PROBE, 4 PINS MALE PLUG , PARALLEL TIPS, LENGTH - 180MM. REMOTE CONTROL PUSH BUTTON | 1 | |
| DPI-530 | Digital Pressure Controller | 1 | |
| DPI-610 | Pressure control Druck | 11 | |
| DPI515 | CONTROLLER-PNEUMATIC PRESSURE | 1 | |
| DPXAMA26-33S | CONNECTOR FOR CONTROL MODULE POWER SUPPLY | 1 | |
| DSM13015CM-01 | DIGIVEX SINGLE MOTION CONTROL | 1 | |
| DTS004801 | MAIN CONTROL BOARD | 1 | |
| DTS004802 | LCD CONTROL BOARD | 1 | |
| DZZ0020 | PASADOR BLOCAJE DE SECTOR DE CONTROL DE ALERÓN | 1 | |
| DZZ0020-1 | PASADOR BLOCAJE DE SECTOR DE CONTROL DE ALERÓN | 1 | |
| DZZ0022-1 | COMPROBADOR CONTROL BLOCAJE ALERÓN EXTERIOR | 1 | |
| DZZ7003 | GENERATOR CONTROL UNIT | 1 | |
| DZZ7171-1 | TENSIOMETER-CONTROL CABLE,1/4,5/16 & 3/8 INCH | 2 | |
| DZZ7177-1 | Tensiometer - Control Cable | 6 | |
| DZZ7177-8 | Tensiometer - Control Cable | 1 | |
| DZZ7179 | FIXTURE-CONTROL SURFACE BALANCE | 1 | |
| DZZ7179 REV B | FIXTURE-CONTROL SURFACE BALANCE | 1 | |
| DZZ7179-1 | FIXTURE, CONTROL SURFACE BALANCE BALANCE DETERMINATION OF UPPER FORWARD RUDDER (NMC6017-I,-505, -511) | 1 | |
| DZZ7179-153 | CONTROL SURFACE BALANCE FIXTUR | 1 | |
| DZZ7179-287-291 | #EACL# FIXTURE CONTROL SURFACE | 1 | |
| DZZ7179-287-293 | #EACL# FIXTURE CONTROL SURFACE | 1 | |
| DZZ7179-287-297 | #EACL# FIXTURE CONTROL SURFACE | 1 | |
| DZZ7179-501 | FIXTURE CONTROL SURF | 1 | |
| DZZ7179-503 | FIXTURE CONTROL SURF | 1 | |
| DZZ7179-507 | CONTROL SURFACE BALANCE FIXTURE | 1 | |
| DZZ7188-1 | CONTROL WHEEL PROTACTOR | 1 | |
| DZZ7317-23 | PIN - CONTROL RIGGIN | 1 | |
| DZZ7317-503 | CONTROL RIG PIN, KIT | 4 | |
| DZZ7347-1 | RIGGING TOOL CONTROL BUS CABLE FLAP | 1 | |
| DZZ7395-1 | ELEVATOR CONTROL YOKE | 1 | |
| DZZ7396-1 | Lock-yoke，elevator control | 1 | |
| DZZ7400-501 | UNIT CONTROL TRIM EN | 1 | |
| DZZ7400-503 | UNIT CONTROL TRIM EN | 1 | |
| DZZ7710 | CONTROL SET | 1 | |
| E-C670G4101102 | FLIGHT CONTROL RIGGING KIT | 1 | |
| E.2000-1000 | FACOM TORQUE CONTROLLERS | 1 | |
| E0016 | Adjusting Rig Engine control Levers | 1 | |
| E0092-10-80NN | ADJUSTING RIG ENGINE CONTROL LEVERS | 4 | |
| E14116-5TI | ELECTRICAL BRAKE ACTUATOR CONTROLLER | 1 | |
| E23400AA | FLIGHT CONTROL COMPUTER EXTENDER CARD | 1 | |
| EAA0321J20A | REMOTE CONTROL KIT V3D1 | 1 | |
| EAGTE114 | GEN CONTROL PANEL | 1 | |
| EC-1542-11 | FUSE, CONTROL TRANSFORMER PRIMA | 2 | |
| EC-1542-22 | FUSE, CONTROL TRANSFORMER SECON | 2 | |
| EC-1542-22 | FUSE, CONTROL TRANSFORMER SECON | 2 | |
| EC-2138 | FAN SPEED CONTROLLER | 1 | |
| EC212-1 | CONTROL BOX | 1 | |
| EC214 | CONTROL BOX | 1 | |
| EC215 | CONTROL BOX | 1 | |
| ECARA-10 | CONTROL BOARD | 1 | |
| ECARB-12 | CONTROL BOARD | 1 | |
| ECARC041-8 | CONTROL BOARD | 1 | |
| ECARD062-5 | CONTROL BOARD | 1 | |
| ECARE068-9 | CONTROL BOARD | 1 | |
| ECARF052-13 | CONTROL BOARD | 1 | |
| ECARG068-7 | CONTROL BOARD | 1 | |
| ECARI052-9 | CONTROL BOARD | 1 | |
| ECARK128-6 | CONTROL BOARD | 1 | |
| ECARM058-9 | CONTROL BOARD | 1 | |
| ECFD0102-5 | CONTROL BOARD | 1 | |
| ECFDB358-2 | CONTROL BOARD PART | 1 | |
| ECFDD108-11 | CONTROL BOARD | 1 | |
| ECFDE402-10 | CONTROL BOARD | 1 | |
| ECFLD030-4 | CONTROL BOARD | 1 | |
| ECFLED2HO-13 | CONTROL BOARD | 1 | |
| ECFLF034-3 | CONTROL BOARD | 1 | |
| ECFLG032-9 | CONTROL BOARD | 1 | |
| ECFLH062-4 | CONTROL BOARD | 1 | |
| ECFLI082R-6 | CONTROL BOARD | 1 | |
| ECFLOODRC-15 | REPAIR CONTROL BOARD | 1 | |
| ECFLOODRCRF1 | REPAIR REMOTE CONTROL | 1 | |
| ECFSLIMDLX14 | CONTROL PCB | 1 | |
| ECL-505 | WING COVERS, hail protection over control surfaces (set of 2) | 1 | |
| ECL-510 | WING CONTROL SURFACES HAIL PROTECTION PADS (set of 2) | 1 | |
| ECPNE022-10 | CONTROL BOARD | 1 | |
| ECPRA072-I | CONTROL BOARD | 1 | |
| ECPRF052-7 | CONTROL BOARD | 1 | |
| ECPRM052-7 | CONTROL BOARD | 1 | |
| ECS-481-H | TOOLKIT, ENVIRONMENT CONTROL | 1 | |
| ECSPA032-4 | ECB AND CONTROL BOARD | 1 | |
| ECSPD022-7 | CONTROL BOARD | 1 | |
| ECSPH271-14 | CONTROL BOARD | 1 | |
| ECSPJ002-2 | CONTROL BOARD | 1 | |
| ECSPK108-6 | CONTROL BOARD | 1 | |
| ECTSA-1 | CONTROL BOX REMOTE CONTROL | 1 | |
| ECTSA-2UK | CONTROL BOX MAGNTEIC UK | 1 | |
| ECTSA-3 | MAGNETIC NC CONTROL BOX | 1 | |
| ECTSA-7 | REPLACEMENT REMOTE CONTROL | 1 | |
| ECUHD218-24 | CONTROL BOARD | 1 | |
| EEBC-FLASH4 | CONTROL LABEL KIT | 1 | |
| EEBC100A-30 | BUTTON FOR CONTROL BOARD | 1 | |
| EEBC100A-32 | CONTROL BOARD PCB | 1 | |
| EEBC500B-44 | CONTROL BOARD PCB | 1 | |
| EEBC500BINT-44 | ASSY PCB CONTROL BOARD | 1 | |
| EGS6000-15-6260 | CONTROL CABLE | 1 | |
| EJAL CONTROL PANEL | EJAL CONTROL PANEL | 1 | |
| EK3 | TEST SET - ELECTRONIC CONTROL | 1 | |
| ELC-131D | RLC METER − LOOP CONTROLLER | 1 | |
| ELC−131D | RLC Meter − Loop Controller | 1 | |
| ELDEC 8-397-01 | HYDRAULIC CONTROL UNIT | 1 | |
| EMB 00053-001 | WRENCH, RECONNECT,AILERON/ELE CONTROLS | 12 | |
| EMB-00053-001 | WRENCH - RECONNECT, AILERON/ELEVATOR CONTROLS | 12 | |
| EMB-01551-001 | BOX,TEST-FLAP CONTROL UNIT | 1 | |
| EMB-015510-011 | FLAP CONTROL UNIT TEST SET | 1 | |
| EMB00053-001 | WRENCH, RECONNECT, AILERON/ ELE CONTROLS | 12 | |
| EMB145WINDSCREENCRTLTEST | EMB145 WINDSCREEN CONTROLLER TEST BOX | 1 | |
| EMBâ?00053â?001 | AILERON ELEVATOR CONTROL | 12 | |
| ENGINE CONTROL MONITORING KIT | Engine Control Monitoring | 1 | |
| EP-63640-MDO | Control with cable | 1 | |
| EP-63640-P-4-1 | Ball & control axis | 1 | |
| EP63640-MD0-01 | REMOTE CONTROL | 1 | |
| EPU 78123-30 | CONTROL CONNECTOR | 1 | |
| ES750-53 | CONTROLLER; GUAGE - PDU ROLLER; | 9 | |
| ET1436 | CLIENT - SOFTWARE, FREEZE PROTECTION CONTROL UNIT | 1 | |
| ET1438 | CLIENT - SOFTWARE, FREEZE PROTECTION CONTROL UNIT | 1 | |
| ETB1580B29 | SPEED CONTROL | 1 | |
| EVCT0405CT401 | CONTROL TOOL FOR IMPELLER | 1 | |
| EVT69943 | CONTROLLER LOOP | 1 | |
| EX-5 | IC MICROCONTROLLER EXTRACTION TOOL | 7 | |
| EX5 | IC (MICROCONTROLLER) EXTRACTION TOOL | 7 | |
| EX5A | IC MICROCONTROLLER EXTRACTION TOOL | 1 | |
| EZ ZONE | TEMPERATURE CONTROLLER | 1 | |
| F 70008 - 500 | Protector Assy Airplane Control | 1 | |
| F0006 | Protractor HPM Control Handle | 1 | |
| F0008 | Rigging Pin HPC and RPM Controls | 1 | |
| F0280 | CONTROL GAUGE 90,5° | 1 | |
| F1237337 | DETECTOR UNIT SERVOCONTROL | 1 | |
| F1274368 | DRY FRICTION TORQUE CONTROL BENCH | 1 | |
| F1278916 | CONTROL UNIT | 1 | |
| F21-6DTX | REMOTE CONTROL UNIT- HANGAR CRANE | 1 | |
| F27021-29 | ADAPTER CONTROL WHEELS | 1 | |
| F27450000 | DRIVE GEAR-SHAFT CONTROLT OOL | 1 | |
| F27451000 | LINK CONTROL TOOL | 1 | |
| F27480000 | DRIVE SHAFT ASSEMBLY CONTROLLER | 1 | |
| F27481000 | DRIVE SHAFT ASSEMBLY CONTROLLER | 1 | |
| F27482000 | CONTROL TOOL FOR THE LINK ASSEMBLY | 1 | |
| F275020000 | CONTROL BENCH | 1 | |
| F27503000 | CONTROL BENCH | 1 | |
| F27504000 | CONTROL BENCH 2 | 1 | |
| F27505000 | CONTROL BENCH 1 | 1 | |
| F27767000 | ELECTRONIC TEST BOX HARNESS CONTAINING A CONTROL POTENTIOMETER | 2 | |
| F27867-1 | ADAPTOR ASSEMBLY-CONTROL WHEEL | 1 | |
| F2MA927503 | SET OF RIGGING PIN FOR FLIGHT CONTROLS | 1 | |
| F2MB927503 | SET OF RIGGING PINS FOR FLIGHT CONTROLS | 1 | |
| F50-W491 | APU Control Testbox | 1 | |
| F52485--500 | PROTRACTOR ASSEMBLY - AIRPLANE CONTROL SURFACES | 7 | |
| F52485-50 | PROTRACTOR ASSEMBLY - CONTROL COLUMN | 1 | |
| F52485-500 | PROTRACTOR ASSEMBLY - AIRPLANE CONTROL SURFACES | 7 | |
| F52485-501 | PROTRACTOR CONTROL C | 1 | |
| F61C0226 | AIR CONTROL VALVE | 1 | |
| F65-0-3044 | ELECTRONIC CONTROL BOX | 1 | |
| F70008-500 | Protector Assy Airplane Control | 1 | |
| F70102 | GAGE ASSY -0 FUEL CONTROL USED TO LOCATE THE | 1 | |
| F70150 | PULLER ASSEMBLY - CONTROL ACTUATOR BEARING | 1 | |
| F70199-52 | USED TO INFLATE AND CONTROL THE TIRE PRESSURE ON THE LANDING GEAR FOR ALL BOEING AIRCRAFTS. THIS TOOL CONSISTS OF AIR CHUCKS FOR BOTH LARGE AND SMALL BORE TIRE VALVE STEMS AND A DIGITAL GAUGE. | 21 | |
| F70207-109 | DOWEL SET - THRUST LEVER, CONTROL STAND | 27 | |
| F70213 | BREAKOUT BOX -0 CONTROL UNIT FIRE DETECT TO | 1 | |
| F70216 | BREAKOUT BOX -0 CONTROL UNIT, WINDOW HEAT TO | 1 | |
| F70240 | ADJUSTING TOOL -THROTTLE CONTROL USED DURING | 1 | |
| F70261 | RIGGING TOOL -0 STABILIZER TRIM CONTROL USED TO | 1 | |
| F70261-1 | Rigging tool-stabilizer trim control | 2 | |
| F703-140 | Auxiliary Defueling External Power Control Unit | 1 | |
| F70308-16 / 4MIT65B80307-1 | PROTRACTOR ASSY-CONTROL COLUMN | 1 | |
| F70316-1 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 1 | |
| F70316-140 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 1 | |
| F70320-1 | Holding Fixture - Control Column | 10 | |
| F70320-1-M | HOLDING FIXTURE-CONTROL COLUMN | 1 | |
| F70320-15 | SHAFT - HOLDING FIXTURE, CONTROL COLUMN (SHAFT F70320-15 IS PART OF BASE F70320-2 INCLUDED KIT F70320-1) | 1 | |
| F70320-2 | FIXTURE CONTROL COLU | 1 | |
| F70330 | STATIC BALANCE EQUIPMENT - CONTROL SURFACES | 2 | |
| F70330-1 | STATIC BALANCE EQUIP -0 CONTROL SURFACES | 5 | |
| F70330-1 -4 | BALANCE JIG STAND - CONTROL SURFACES | 2 | |
| F70330-104 | Static Balance Equipment - Control Surfaces | 5 | |
| F70330-125 | STATIC BALANCE EQUIPMENT - CONTROL SURFACES | 7 | |
| F70330-126 | Static Balance Equip - Control Surfaces | 8 | |
| F70330-126 | STATIC BALANCE EQPT – CONTROL SURFACE | 8 | |
| F70330-14 | BALANCE JIG STAND - CONTROL SURFACES | 2 | |
| F70330-16 | BEAM ASSY STATIC BALANCE CONTROL SURFACE | 3 | |
| F70330-162 | Static Balance Equipment - Control Surfaces | 5 | |
| F70330-162 | STATIC BALANCE EQPT – CONTROL SURFACE | 5 | |
| F70330-2 | STATIC BALANCE EQUIP -0 CONTROL SURFACES | 1 | |
| F70330-3 | Static Balance Equipment - Control Surfaces | 10 | |
| F70330-4 | Static Balance Equipment - Control Surfaces | 12 | |
| F70330-87 | STATIC BALANCE EQUIPMENT - CONTROL SURFACES | 3 | |
| F70330-99 | STATIC BALANCE EQUIPMENT - CONTROL SURFACES | 2 | |
| F71228 | FLIGHT CONTROL WRENC | 3 | |
| F71228-500 | FLIGHT CONTROL WRENCH | 11 | |
| F71292-1 | CONTROL SURFACE | 1 | |
| F71292-16 | Protractor base kit-control surface | 3 | |
| F71292-17 | PROTRACTOR BASE KIT CONTROL SURFACE | 8 | |
| F71292-A | PROTRACTOR BASE KIT - CONTROL SURFACE | 1 | |
| F71292-A | CONTROL SURFACE | 1 | |
| F71329 | TEST STATION,FUEL CONTROL SYSTEM | 17 | |
| F71382 | CONTROL PANEL | 1 | |
| F71429-500 | GAGE AND ADAPTER ASSEMBLY (RUDDER CONTROL) | 1 | |
| F71435 | WRENCH KIT -0 JT3D ENGINE CONTROL USED TO REMOVE | 1 | |
| F72485-500 | PROTRACTOR AIRPLANE CONTROL SURFACES | 1 | |
| F72771 | LOCK ASSEMBLY -0 FLIGHT CONTROLS USED TO PREVENT | 1 | |
| F72771-1 | FLIGHT CONTROL LOCK | 4 | |
| F72771-2 | FLIGHT CONTROL LOCK | 1 | |
| F72771-3 | FLIGHT CONTROL LOCK | 3 | |
| F72785-106 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-107 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-108 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-11 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 3 | |
| F72785-12 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 3 | |
| F72785-13 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 4 | |
| F72785-53 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-54 | CABLE ASSY POWER CONTROL TOOL | 2 | |
| F72785-550 | TEST SET,CONTROL | 2 | |
| F72785-551 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-552 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 2 | |
| F72785-553 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-554 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-555 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-557 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 1 | |
| F72785-573 | TEST EQUIPMENT - ELEVATOR/RUDDER/AILERON POWER CONTROL UNIT | 2 | |
| F72785-XX | Test Equipment -Elevator/Rudder/Aileron Power Control Unit | 1 | |
| F72790 | Protractor Mount Assembly - Pilot’s and Copilot’s Control Wheel | 26 | |
| F72790 | MOUNT PROTRACTOR CONTROL WHEEL | 26 | |
| F72797 | Wrench - Control Column Splined | 1 | |
| F72799 | WRENCH -0 AILERON POWER CONTROL LINKAGE USED | 1 | |
| F72799-2 | AILERON POWER CONTROL LINKAGE | 1 | |
| F72846 | FIXTURE ASSY -0 CONTROL MECHANISM TEST TO APPLY | 1 | |
| F72867-1 | Adapter Assembly - Control Wheel, Torque and Force Test | 23 | |
| F72867-1 | ADAPTER ASSEMBLY - CONTROL WHEEL | 23 | |
| F72900 | TORQUE ADAPTER- AILERON CONTROL CAPTAINS TO | 1 | |
| F72900-1 | CONTROL DISCON TOOL | 5 | |
| F72900-2 | ADAPTER CONTROL COLU | 1 | |
| F72914 | TORQUE ADAPTER ASSY -0 RUDDER CONTROL POWER UNIT | 1 | |
| F72914-1 | Torque adapter assy-rudder control power unit instl | 3 | |
| F72916 | ROLLER SWAGING ASSY -0 BEARING HOUSING, CONTROL | 1 | |
| F72916-1 | ROLLER SWAGING ASSEMBLY - BEARING HOUSING CONTROL CRANK | 2 | |
| F72917-19 | STRAIGHT EDGE - CONTROL WHEEL | 23 | |
| F72947 | TEST FIXTURE SET -0 POWER CONTROL UNIT, FLIGHT | 1 | |
| F72952-2 | CONTROL SURFACE PROTRACTOR THRUST LEVER ADAPTER | 6 | |
| F72992 | STAKING KIT-ENGINE CRANK NO 1&3 CONTROL BUSHING | 1 | |
| F7XC201207004 | SLAT ROLLER CONTROL GAUGE SMS 7029C5 | 1 | |
| F7XC201207005 | SLAT ROLLER CONTROL GAUGE SMS 7029C3 AND C4 | 1 | |
| F7XC201207006 | SLAT ROLLER CONTROL GAUGE SMS 7029 C2 | 1 | |
| F7XC201207007 | SLAT ROLLER CONTROL GAUGE SMS 7029 C1 | 1 | |
| F80-0-3044 | CONTROL BOX | 1 | |
| F800049-56 | ASSEMBLY - LOCK, FLIGHT CONTROLS(LEADING EDGE) | 1 | |
| F80049 | LCOK ASSEMBLY FLIGHT CONTROLS | 5 | |
| F80049-1 | LOCK ASSY, FLIGHT CONTROLS | 3 | |
| F80049-12 | LOCK-FLIGHT CONTROL | 9 | |
| F80049-17 | Lock Assembly - Flight Controls | 6 | |
| F80049-17 -31 -46 -56 | Lock Assembly -Flight Controls | 1 | |
| F80049-18 | LOCK FLIGHT CONTROL | 9 | |
| F80049-19 | FLIGHT CONTROLS LOCK ASSY | 1 | |
| F80049-2 | LOCK-FLIGHT CONTROL | 6 | |
| F80049-31 | Lock Assembly - Flight Controls | 5 | |
| F80049-32 | LOCK ASSEMBLY - FLIGHT CONTROL | 1 | |
| F80049-33 | FLIGHT CONTROLS LOCK ASSY | 1 | |
| F80049-46 | Lock Assembly - Flight Controls | 17 | |
| F80049-47 | FLIGHT CONTROL LOCK ASSY. | 2 | |
| F80049-56 | Lock Assembly - Flight Controls | 17 | |
| F80049-56 | LOCK FLIGHT CONTROL | 17 | |
| F80049-57 | FLIGHT CONTROL GUARD | 2 | |
| F80049-6 | FLIGHT CONTROLS | 2 | |
| F80049-64 | LOCK ASEMBLY -FLIGHT CONTROLS | 1 | |
| F80049-65 | LOCK ASSEMBLY - FLIGHT CONTROLS | 16 | |
| F80049-65 | FLIGHT CONTROLS - LOCK ASSEMBLY | 16 | |
| F80049-66 | LOCK ASSEMBLY - FLIGHT CONTROLS | 14 | |
| F80049-67 | FLIGHT CONTROL SHUTOFF VALVE | 4 | |
| F80049-67 | LOCK ASSEMBLY - FLIGHT CONTROLS | 4 | |
| F80049-68 | LOCK ASSEMBLY - FLIGHT CONTROLS | 5 | |
| F8004912 | LOCK ASSY - FLIGHT CONTROLS | 9 | |
| F80063-500 | Installation Control Elevator | 2 | |
| F80150-1 | Lock -Rudder. Power Control Unit Removed | 15 | |
| F80170-1 | Test Manifold -Bypass Valve. Aileron/Elevator Power Control Unit | 4 | |
| F80195-1 | Dowel Set - Thrust Lever Control Stand | 14 | |
| F80197-5 | Wrench Set - Limit Switch, Flap Control Unit | 25 | |
| F80197-6 | WRENCH-LIMIT SWITCH ,FLAP CONTROL UNIT | 3 | |
| F80197-7 | WRENCH-LIMIT SWITCH ,FLAP CONTROL UNIT | 3 | |
| F80204-1 | Wrench Set -Transfer Valve. Yaw Damper. Rudder Power Control Unit | 5 | |
| F80206-1 | Breakout Box - Cabin Control Pressure | 5 | |
| F80206-1-REV | BREAKOUT BOX-CABIN PRESSURE CONTROL UNIT | 1 | |
| F80212-30 | PEDAL, CONTROL | 20 | |
| F80217-125 | Test Set - Autopilot Elevator/Rudder/Aileron Control Unit. | 1 | |
| F80218-40 | TEST - FORCE TRANSDUCER CONTROL WHEEL STEERING | 2 | |
| F80218-41 | Test Set -Force Transducer. Control Wheel Steering Sp177 / Sp300 Auto Pilot | 3 | |
| F80218-42 | TEST - SET TRANSDUCE CONTROL WHEEL STEERING | 6 | |
| F80220-1 | Functional Test - Transfer Mechanism, Aileron Control | 2 | |
| F80224-60 | Test Equipment - Flight Spoiler Power Control Unit | 1 | |
| F80224-79 | Test Equipment - Flight Spoiler Power Control Unit | 5 | |
| F80225-1 | SP177 DUAL CHANNEL FLIGHT CONTROL COMPUTER (FCC) TEST EQUIPMENT | 1 | |
| F80225-19 | Sp177 Dual Channel Flight Control Computer (Fcc) Test Equipment | 2 | |
| F80232 | Test fixture-control valve assy,T.E. flap | 1 | |
| F80232-1 | Test Fixture - Control Valve Assembly, Trailing Edge Flap | 3 | |
| F80256-10 | LG Control System Instalation | 5 | |
| F80323-1 | TEST FIXTURE -CONTROL VALVE ASSEMBLY,TRAILING EDGE FLAP | 1 | |
| F8O049-65 | LOCK ASSEMBLY - FLIGHT CONTROLS | 16 | |
| FADEC2 | FULL AUTHORITY DIGITAL ENGINE (OR CONTROL PN: FADEC2 ENGINES CFM56-5C CFM56-7B CFM-80E2 | 1 | |
| FASH-KAA0-01 | PROGRAMMABLE TEMPERATURE CONTROLLER | 1 | |
| FAT01-35-45000 | CONTROL WHEEL CHECKING GAGE | 1 | |
| FB2400-S | TAPETE CONTROL FOD | 1 | |
| FB98A0026 | PIN RIGGING RUDDER CONTROL | 1 | |
| FC-EN-LNBL3 | Flight Controls /Engines Locker (Yellow) | 1 | |
| FC-EN-LNBL4 | Flight Controls /Engines Locker (Yellow) | 1 | |
| FCFA3755080L | FLOW CONTROL | 1 | |
| FDE83-20-03 | CHECK BOX FOR CONTROL CY. | 1 | |
| FE101901 | PIN - RIGGING, AILERON CONTROL | 2 | |
| FE259-901 | RETAINER - ELEVATOR CONTROL REGULATOR | 2 | |
| FE259901 | RETAINER - ELEVATOR CONTROL REGULATOR | 2 | |
| FE259−901 | RETAINER − ELEVATOR CONTROL REGULATOR | 2 | |
| FE296000000 | CONTROL BOX | 1 | |
| FGFB927500 | FULLY EQUIPPED CASE OF MEASURING INSTRUMENTS FOR FLIGHT CONTROL LOAD AND DEFLECTION | 1 | |
| FGFB927502 | CONTROL COLUMN ELEVATOR DEFLECTION FIXTURE TOOL | 1 | |
| FGFB927503 | TOOL, FLIGHT CONTROL RIG | 1 | |
| FGFB927503020 | FLIGHT CONTROL PIN | 1 | |
| FGFB932308-1 | MANO PRESS CONTROL | 1 | |
| FGFB976501 | SET OF PINS FOR THROTTLE CONTROLS ADJUSTMENT | 1 | |
| FGR-PRO-90 G | Grinder 90 deg. for FlapSpeed Controller | 1 | |
| FGV-100XY | CONTROL STICK FORCE MEASUREMENT (CYCLIC, COLLECTIVE) (NIDEC-SHIMPO FGV-100XY) | 3 | |
| FIR-307-Q | TOOLKIT, FIRE CONTROL | 1 | |
| FL-1 | CONTROL COLUMN CHECKING GAUGE | 1 | |
| FLAPSPEED-PRO-102 | FLAPSPEED CONTROLLER | 1 | |
| FLC-73-I | TOOLKIT, FIGHT CONTROL | 1 | |
| FM001970 | BRAKE CONTROL VALVE TEST | 1 | |
| FME5-71799 | Balance Jig Stand -Control Surfaces | 1 | |
| FPK-A102 | CONTROLLER AIR KIT | 2 | |
| FPK-A103 | CONTROLLER AIR KIT | 1 | |
| FPK-E102 | FLAPSPEED CONTROLLER | 1 | |
| FPK-E103 | CONTROLLER ELECTRIC | 1 | |
| FPK-PRO-102 | CONTROLLER AIR KIT | 1 | |
| FPK-PRO-103-00 | CONTROLLER AIR KIT | 1 | |
| FR216D0000-7 | TEST STATION,FUEL CONTROL SYSTEM COMPONENTS | 1 | |
| FRLKS | STAND AIR CONTROL | 1 | |
| FST8168 | P-8 FUEL CONTROL ADAPTER SET / MFC: 50027 | 1 | |
| FT03 | LOCKER BANK W/CONTROLLER 01-07 | 1 | |
| FT05 | LOCKER BANK W/CONTROLLER 01-07 | 1 | |
| FTE02-35-46210 | GAGE FOR CONTROL STICK | 1 | |
| FTR 7060-5 | FUEL INJECTOR TESTER(FUEL CONTROL TESTER STAND) | 1 | |
| FTR-7060-5 | FUEL CONTROL TEST STAND | 1 | |
| FTR7060-5 | FUEL CONTROL TESTER STAND | 1 | |
| FW03 | LOCKER W/ CONTROLLER 01-29 | 1 | |
| FW05 | LOCKER W/CONTROLLER 01-14 | 1 | |
| FW06 | LOCKER W/ CONTROLLER 01-29 | 1 | |
| FW07 | LOCKER W/CONTROLLER 01-29 | 1 | |
| G-4000 | HAND HELD STATIC CONTROL AIR GUN | 1 | |
| G0002700003 | KIT, FLIGHT CONTROLS RIGGING PINS | 1 | |
| G0142710001 | KIT, AILERON BALANCE TAB CONTROL LOCKING | 1 | |
| G0142710003 | KIT, AILERON CONTROL LEVER LOCKING | 1 | |
| G1002130001-001 | IASC PRESSURE CONTROL TEST HOSE | 5 | |
| G1002130001-001 | HOSE, IASC PRESSURE CONTROL TES | 5 | |
| G1002711040-001 | CONTROL COLUMN TEST FIXTURE | 3 | |
| G1002720042-063 | FLIGHT CONTROL RIGGING KIT | 5 | |
| G1002720048-001 | RTL/RUDDER TRIM ACTUATOR CONTROL BOX | 3 | |
| G1002730044-001 | CONTROL COLUMN POSITION HARNESS TEST | 2 | |
| G1004500054-001 | RDA MANUAL CONTROLLER | 1 | |
| G1196 | DME CONTROL | 1 | |
| G2096 | COMM CONTROL | 1 | |
| G21004 | VACUUM HARNESS -0 CABIN PRESSURE CONTROLLER | 1 | |
| G21004-1 | VACUUM HARNESS - CABIN PRESSURE CONTROLLER | 10 | |
| G27016-68 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL PACKAGE (PCP) AND POWER CONTROL MODULE (PCM) (CE) | 1 | |
| G27016-69 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL PACKAGE (PCP) AND POWER CONTROL MODULE (PCM) (CE) | 5 | |
| G27016-70 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL PACKAGE (PCP) AND POWER CONTROL MODULE (PCM) (CE) | 1 | |
| G27018 | RIGGING EQUIPMENT -0 SPEED BRAKE CONTROL | 1 | |
| G27018-1 | RIGGING EQUIPMENT - SPEED BRAKE CONTROL | 3 | |
| G27023-1 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 10 | |
| G27023-104 | Test eqpt-freeplay，flight controls | 1 | |
| G27023-107 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 1 | |
| G27023-113 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 2 | |
| G27023-124 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 4 | |
| G27023-125 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 4 | |
| G27023-126 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 2 | |
| G27023-136 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 4 | |
| G27023-167 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 1 | |
| G27023-39 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 1 | |
| G27023-40 | TEST EQUIPMENT - FREEPLAY, FLIGHT CONTROLS | 2 | |
| G27027 | CONTROL BOX EQPT -0 POWER PACK,T.E. FLAP DRIVE | 1 | |
| G27027-1 | CONTROL BOX | 1 | |
| G27027-44 | CONTROL BOX EQUIPMENT - POWER PACK, TRAILING EDGE FLAP DRIVE | 1 | |
| G27065-14 | LOCK EQUIPMENT - OUTBOARD AILERON POWER CONTROL UNIT | 1 | |
| G27065-18 | LOCK EQUIPMENT - OUTBOARD AILERON POWER CONTROL UNIT | 3 | |
| G27075-1 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL ASSEMBLY (PCA) REMOVAL/INSTALLATION (CE) | 2 | |
| G28028 | TEST BOX - FUEL JETTISON CONTROL CARD (FJCC) | 1 | |
| G28029 | LOAD BOX - ON-BOARD MAINTENANCE COMPUTER/FUEL JETTISON CONTROL CARD/FUEL SYSTEM MANAGEMENT CARD (OMC/FJCC/ FSMC) | 1 | |
| G29015-1 | CONTROL WHEEL TORQUE ADAPTER | 8 | |
| G32006 | BREAKOUT BOX - CONTROL LEVER, LANDING GEAR ACTUATOR MODULE ASSEMBLY | 1 | |
| G32014 | TEST EQPT -0 TORQUE SENSOR, BRAKE CONTROL | 1 | |
| G32014-1 | TORQUE SENSOR BRAKE CONTROL TEST EQUIP | 1 | |
| G32014-20 | TEST EQUIP -TORQUE SENSOR- BRAKE CONTROL | 1 | |
| G32014-26 | TEST EQUIPMENT - TORQUE SENSOR, BRAKE CONTROL | 3 | |
| G32014-27 | TEST EQUIPMENT - TORQUE SENSOR, BRAKE CONTROL | 1 | |
| G32014-28 | TEST EQUIPMENT - TORQUE SENSOR, BRAKE CONTROL | 4 | |
| G32014-29 | TESTER SENSOR BRAKE CONTROL | 1 | |
| G32016-1 | BREAKOUT BOX - LANDING GEAR CONTROL LEVER MODULE | 1 | |
| G35002-1 | STOP, TEST DOOR, PSU (TO TEST OXYGEN CONTROL UNIT) | 2 | |
| G36035-45 | REGULATED PRESSURE CONTROL | 1 | |
| G51004-1 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | 1 | |
| G520402-1 | TRANSFER TUBE / CONTROL POSITIONER | 1 | |
| G57010-1 | Sling Assembly -Wing Maintenance Interface Control (Mic) Tip. Removal/Installation (Ce) | 1 | |
| G57010-25 | SLING ASSEMBLY - WING MAINTENANCE INTERFACE CONTROL (MIC) TIP, REMOVAL/INSTALLATION (CE) | 3 | |
| G5M5M0-127-0000 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | 1 | |
| G600-100025-1 | PLUG, ENVIRONMENT CONTROLUNIT EXHAUST | 3 | |
| G600-270004-1 | RESTRAINT - CONTROL WHEEL | 1 | |
| G600-270005-1 | Board Assembly - Control Wheel | 1 | |
| G600-270008-1 | Clamp - Control Wheel Column | 1 | |
| G600-270033-135 | KIT CONTROL COLUMN WHEEL RIGGING | 1 | |
| G600-270033-135 | CONTROL WHEEL COLUMN RIGGING | 1 | |
| G600-270033-149 | CONTROL COLUMN RIGGING KIT | 3 | |
| G600-275016-1 | FLAP CONTROL TEST BOX | 4 | |
| G600-281202-1 | KIT, CONTROL CABLE CLAMP | 1 | |
| G600−270004−1 | Restraint − Control Wheel | 1 | |
| G600−270005−1 | Board Assembly − Control Wheel | 1 | |
| G600−270008−1 | Clamp − Control Wheel Column | 1 | |
| G600−270033−135 | Kit − Control Wheel/Column Rigging | 1 | |
| G601-35-953-0000-0 | TEST SET - LANDING GEAR SAFETY RELAY CONTROL SIMUL | 2 | |
| G601-35953-0000-0 | TEST SET - LANDING GEAR SAFETY RELAY CONTROL SIMUL | 2 | |
| G6013595300000 | TEST SET - LANDING GEAR SAFETY RELAY CONTROL SIMU | 2 | |
| G601R101207-1 | PLUG, ENV CONTROL UNIT, EXHAUST | 9 | |
| G601R27000 | KIT - FLIGHT CONTROLS RIGGING PINS | 1 | |
| G601R27000-51 | RIGGING KIT-CONTROL COLUMN AND WHEEL | 6 | |
| G601R270001-1 | KIT - FLIGHT CONTROLS RIGGING PINS | 9 | |
| G601R270002-1 | RIGGING KIT, CONTROL COLUMN AND WHEEL | 2 | |
| G601R270002-51 | RIGGING KIT, CONTROL COLUMN AND WHEEL | 5 | |
| G601R270002-51-REVB | RIGGING KIT CONTROL COLUMN/WHEEL | 1 | |
| G601R270002−1 | Rigging Kit − Control Column and Wheel | 2 | |
| G601R270002−51 | Rigging Kit − Control Column and Wheel | 5 | |
| G601R270003-1 | RIGGING - CONTROL SURFACES | 6 | |
| G601R270003−1 | Rigging Kit Assy − Control Surface | 6 | |
| G670 | ANTI ICE LEAK CONTROL BREAK?OUT BOX | 1 | |
| G670-271001-1 | CONTROL COLUMN FLANK DRIVE WRENCH | 1 | |
| G670-3621001-101 | Anti Ice Leak Control Break?Out Box | 1 | |
| G670-3621001−101 | ANTI-ICE LEAK CONTROL (AILC) BREAK−OUT BOX | 1 | |
| G670271001−1 | Flank Drive Wrench − Control Column | 1 | |
| G670−3621001−101 | Anti−Ice Leak Control (AILC) Break−Out Box | 1 | |
| G700-213101-1 | Harness - Cabin Pressure Controller | 1 | |
| G700-242103-1 | Harness - Generator Control Unit | 1 | |
| G700-270004-1 | Portable Bearing Removal/Installation Kit Flight Controls | 2 | |
| G700-270005-1 | Kit - Control Surface Backlash Check | 3 | |
| G700-27110-3-31 | KIT - RIG PINS AILERON CONTROL SYSTEM AND FLAP | 5 | |
| G700-271102-1 | Kit - Control Column Rigging Fixture | 4 | |
| G700-271102-1 | KIT, CONTROL COLUMN RIGGING FIX | 4 | |
| G700-271102-3 | KIT CONTROL COLUMN RIGGING FIXTURE | 1 | |
| G700-271102-5 | KIT CONTROL COLUMN RIGGING FIXTURE | 1 | |
| G700-271102-7 | KIT CONTROL COLUMN RIGGING FIXTURE | 1 | |
| G700-271103-31 | Kit - Rig Pins Aileron Control System And Flaps | 5 | |
| G700-271103−31 | KIT - RIG PINS AILERON CONTROL SYSTEM AND FLAPS | 5 | |
| G700-271107-1 | RETAINER-AILERON CONTROL REGULATOR | 2 | |
| G700-271107-9 | RETAINER-AILERON CONTROL REGULATOR | 2 | |
| G700-273106-1 | RETAINER-ELEVATOR CONTROL REGULATOR | 2 | |
| G700-275102-1 | Harness - Slat And Flap Control Unit | 1 | |
| G700-276101-1 | Harness - Flight Control Unit | 1 | |
| G700-282001-1 | Controller - Fuel Shutoff Valve | 1 | |
| G700-282002-1 | Manual Tool - Fuel Controller Shutoff Valve | 3 | |
| G700-282002−1 | MANUAL TOOL - FUEL CONTROLLER SHUTOFF VALVE | 3 | |
| G700-304101-1 | Harness - Windshield Temperature Control | 1 | |
| G700-313109-1 | HARNESS, WINDSHIELD TEMP CONTROL | 3 | |
| G700-313109-23 | HARNESS, WINDSHIELD TEMP CONTROL | 2 | |
| G700-323101-1 | Harness - Landing Gear Electronic Control Unit | 1 | |
| G700-324304-1 | Harness - Brake Control Unit | 1 | |
| G700-361102-1 | Harness - Bleed Management Control | 1 | |
| G700-496101-1 | Harness - Full Authority Digital Engine Control | 1 | |
| G700???270005???1 | KIT ??? CONTROL SURFACE BACKLASH CHECK | 3 | |
| G700???271102???1 | KIT ??? CONTROL COLUMN RIGGING FIXTURE | 4 | |
| G700???271103???31 | KIT ??? RIG PINS AILERON CONTROL SYSTEM AND FLAPS | 5 | |
| G700−270005−1 | KIT − CONTROL SURFACE BACKLASH CHECK | 3 | |
| G700−271102−1 | KIT − CONTROL COLUMN RIGGING FIXTURE | 4 | |
| G700−271103-31 | KIT - RIG PINS AILERON CONTROL SYSTEM AND FLAPS | 5 | |
| G700−271103−31 | KIT − RIG PINS AILERON CONTROL SYSTEM AND FLAPS | 5 | |
| G700−271107−1 | RETAINER−AILERON CONTROL REGULATOR | 2 | |
| G700−282002−1 | MANUAL TOOL − FUEL CONTROLLER SHUTOFF VALVE | 3 | |
| G71021-1 | DRIVE EXTENSION STARTER (CONTROL TOOL) | 2 | |
| G71021-16 | START THE PREMIUM DOOR SUPER CONTROL LENGTHENED ROD | 15 | |
| G7406-04 | VHF CONTROL PANEL | 1 | |
| G76001 | PIN SET -0 RIGGING, ENGINE CONTROLS, CF6-80C2 | 1 | |
| G76001-1 | PIN SET - RIGGING, ENGINE CONTROLS, CF6-80C2 | 1 | |
| G76002-1 | PROTRACTOR ASSY CONTROL COLUMN | 1 | |
| G76002-19 | PROTRACTOR ASSEMBLY - CONTROL COLUMN | 14 | |
| G76002-37 | CONTROL WHEEL PROTRACTOR | 5 | |
| G76002-42 | PROTRACTOR ASSEMBLY - CONTROL COLUMN | 7 | |
| G76003 | TEST FIXTURE -0 CONTROL STAND MICRO SWITCH PACK | 1 | |
| G76003-1 | TEST FIXTURE - CONTROL STAND MICROSWITCH PACK ASSEMBLY | 1 | |
| G76003-23 | TEST FIXTURE CONTROL STAND SWITCH PACK ASSEMBLY | 1 | |
| G76004 | JIG ASSEMBLY -0 MICROSWITCH, CONTROL STAND | 1 | |
| G76004-1 | JIG ASSEMBLY - MICROSWITCH, CONTROL STAND THROTTLE | 1 | |
| G76005-1 | ASSEMBLY JIG - MICROSWITCH ASSEMBLY, THROTTLE CONTROL STAND | 1 | |
| G76006 | MICROSWITCH ASSEMBLY JIG, THROTTLE CONTROL | 1 | |
| G76006-1 | MICROSWITCH ASSEMBLY JIG, THROTTLE CONTROL STAND | 1 | |
| GAGE FOR CONTROLFTE02-35-46210 | GAGE FOR CONTROL | 1 | |
| GAP510RP5-24 | RIG PIN (RUDDER CONTROL MODULE) | 1 | |
| GAP510RP5-50 | RIG PINS (AILERON / ELEVATOR CONTROL MODULE) | 1 | |
| GAP510RP6-66 | RIG PIN (CONTROL COLUMN) | 1 | |
| GAU9372 | FLIGHT CONTROL FEELER GAUGE | 1 | |
| GB 314-73-0001 | ENGINE FUEL AND CONTROL –CONTROL VALVE REPLACEMENT GSE 332. | 1 | |
| GB-960-100-250 | TOOL KIT FIXED FLIGHT CONTROLS ADJUST | 1 | |
| GB808-022-000 | AIR PRESSURE CONTROL | 1 | |
| GE140543 | HAND CONTROLLER CABLE | 1 | |
| GEMU122-5 | ENGINE CONTROL UNIT WITH VIBRATION HARNESS KIT | 1 | |
| GER31003557 | CONTROLLER 6IN FILLET KNIFE | 1 | |
| GER31003559 | CONTROLLER 10IN FILLET KNIFE | 1 | |
| GER31003599 | CONTROLLER 6IN FOLDING KNIFE | 1 | |
| GES04164-455 | HAND CONTROLLER SMS TEST | 1 | |
| GF-78-00 | PIN KIT, FLIGHT CONTROL ADJUSTMENT | 1 | |
| GLD15MK1 | LOW PRESSURE CONTROLLER | 1 | |
| GLP15MK1 | HIGH PRESSURE CONTROLLER | 1 | |
| GM53244018-5 | REMOTE CONTROL BOX ASSY | 1 | |
| GMIDS34-C010-2 | IRT THERMOGRAPHY CONTROLLER KIT | 1 | |
| GMIDS34CE160-2 | HEAT BLANKET "CABLE TO" CONTROLLER KIT | 1 | |
| GMIDS34CE260-2 | CABLE TO CONNECT PLASTIC CONTROLLER (SOURIAU) TO METALLIC BLANKET (JAEGER) 3 M | 1 | |
| GMIDS34CK010-2 | CONTROLLER, HEATING BLANKETS - 220V | 1 | |
| GMIDS34CK10-2 | NDT CONTROLLER, HEATING BLANKETS, 220V | 1 | |
| GMIDS35CK010-2 | CONTROLLER | 1 | |
| GMIET110-1 (120V) | FOLDABLE OVEN / HEAT GUN / CONNECTOR FOR ANITA CONTROL | 1 | |
| GMIET110-2 (230V) | FOLDABLE OVEN / HEAT GUN / CONNECTOR FOR ANITA CONTROL | 1 | |
| GMIUSC87B0201 | VALISE CONTROLE ULTRASON POUR COMPOSITES | 1 | |
| GNIWIR-MA-2 | STR- HEATER LAMP CONTROL MODE | 1 | |
| GS10181 | COVER-CONTROL CALIBRAT | 1 | |
| GS10306 | KIT FUEL CONTROL CLOSU | 1 | |
| GS10308 | KIT FUEL CONTROL CLOSU | 1 | |
| GS10309 | KIT FUEL CONTROL CLOSU | 1 | |
| GS10310 | KIT FUEL CONTROL CLOSU | 1 | |
| GS10311 | KIT FUEL CONTROL CLOSU | 1 | |
| GS10312 | KIT FUEL CONTROL CLOSU | 1 | |
| GS10326 | COVER CONTROL SHAFT | 1 | |
| GS10347 | FUEL CONTROL PROTRACTOR | 1 | |
| GS10353 | KIT FUEL CONTROL | 1 | |
| GS10673 | FIXTURE PROP CONTROL LEAKAGE TEST | 2 | |
| GS10883-1 | MECHANICAL CONTROL ASSEMBLY | 1 | |
| GS11001 | FIXTURE MAIN CONTROL A | 1 | |
| GS11066 | COVER CONTROL CALIBRAT | 1 | |
| GS11198 | PROTRACTOR - CONTROL SHAFT | 1 | |
| GS11591 | KIT FUEL CONTROL CLOSU | 1 | |
| GS11632-1 | FUEL CONTROL CLOSURE | 1 | |
| GS11951-1 | PROTRACTOR - CONTROL SHAFT | 1 | |
| GS12540 | CONTROL ALIGNMENT FIXTURE | 1 | |
| GS12755- | TEMPERATURE CONTROL KIT | 1 | |
| GS12755-2 | KIT, TEMPERATURE CONTROL | 1 | |
| GS12755-3 | KIT, TEMP. CONTROL | 2 | |
| GS12755-4 | KIT TEMP. CONTROL | 1 | |
| GS12755-5 | TEMPERATURE CONTROL KIT | 1 | |
| GS13013 | FIXT MAIN CONTROL TEST | 1 | |
| GS13237-1 | ACM FLOW CONTROL VALVE ADAPTER | 4 | |
| GS13238-1 | PLUG-TEST ACM FLOW CONTROL VALVE | 2 | |
| GS13264-4 | CAP - PRESSURE TEST, HEAT EXCHANGER (ELECTRONIC PRESSURE CONTROL ONLY) | 5 | |
| GS1400 | CONTROL TEST | 1 | |
| GS15085-1 | PULLER, CONTROL | 1 | |
| GS15228-1 | PULLER, MECHANICAL, CONTROL | 1 | |
| GS15684-3 | PAS CONTROL ARM | 1 | |
| GS19473-1 | CONTROL SHAFT BEARING DRIVER | 1 | |
| GS19476-1 | CONTROL SHAFT PROTRACTOR | 1 | |
| GS20336-1 | CLOSURE FUEL CONTROL | 1 | |
| GS20397-1 | CONTROLLER TEST TRANSFER TUBE | 2 | |
| GS20402-1 | Positioner Propeller Control (REMPLACED BY GS23485-1) | 6 | |
| GS20402-2 | Control Positioner | 1 | |
| GS204021 | POSITIONER-PROPELLER CONTROL | 6 | |
| GS204022 | POSITIONER PROPELLER CONTROL | 1 | |
| GS20839-1 | PIN PRESS, CONTROL GOVERNOR | 1 | |
| GS20865-1 | ADAPTER, INTERFACE 14RF CONTROL TO ENGINE & GEARBOX | 1 | |
| GS21024-1 | ADAPTER, CONTROL DRIVE | 1 | |
| GS22257 | PRESSURE CONTROLLER | 1 | |
| GS22257-1 | CLOSURE KIT, CONTROLLER, PRESSURE | 1 | |
| GS23012-1 | CONTROL POSITIONER | 5 | |
| GS23485-1 | POSITIONER PROPELLER CONTROL | 2 | |
| GS23485-2 | CONTROL POSITIONER | 24 | |
| GS234851 | POSITIONER PROPELLER CONTROL | 2 | |
| GS234852 | POSITIONER PROPELLER CONTROL | 24 | |
| GS23485â?2 | CONTROLÂ RODS | 24 | |
| GS24763-1 | AUGMENTOR FUEL CONTROL KIT | 1 | |
| GS47537 | HARNESS CONTAINING A CONTROL POTENTIOMETER | 1 | |
| GS8001 | PRESSURE CONTROLLER TEST SET | 1 | |
| GS9400-1 | TESTER-FLOW CONTROL AND SHUT OFF VALVE | 1 | |
| GS9400-5 | TESTER-FLOW CONTROL AND SHUT OFF VALVE | 1 | |
| GSB2700008 | FLIGHT CONTROL RIG PIN KIT | 6 | |
| GSB2733002 | RIGGING FIXTURE CONTROL COLUMN | 4 | |
| GSB6110033 | CONTROL POSITIONER TOOL | 1 | |
| GSE 059 | PROTACTOR, CONTROL SURFACE DEFLECTION | 1 | |
| GSE 068 | FLIGHT CONTROL DISCONNECT TOOL | 1 | |
| GSE 169 | PINS, RIGGING - COCKPIT CONTROLS | 1 | |
| GSE 233-190 | KIT RIGGING PINS, FLIGHT CONTROLS FOR EMBRAER 190 | 1 | |
| GSE 2700924 | FLIGHT CONTROLS RIG PIN KIT | 1 | |
| GSE 27X-00-05 | CONTROL SURFACE BACKLASH KIT | 1 | |
| GSE 27X-11-03 | KIT - RIG PINS AILERON CONTROL SYSTEM AND FLAPS | 1 | |
| GSE 378 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE. | 1 | |
| GSE 380 | CLIP - TENSION ADJ, CONTROL CABLE | 1 | |
| GSE-380 | CLIP-TENSION ADJ, CONTROL CABLE | 1 | |
| GSE140 | BALANCER - CONTROL SURFACES | 1 | |
| GSE233 | KIT RIGGING PINS, FLIGHT CONTROLS FOR EMBRAER 190 | 1 | |
| GSE2700419 | CONTROL COLUMN RECONNECT TOOL (AIRCRAFT 5001 THRU AIRCRAFT 5389 NOT HAVING ASC 99A)-GSE2700419 | 1 | |
| GSE2720924 | FLIGHT CONTROL CABLE REMOVE / REPLACE RIG KIT-GSE2720924 | 1 | |
| GSE378 | CONTROL SURFACE BACKFLASH CALCULATION SOFTWARE | 1 | |
| GSE635501-001 | CONTROL PANEL | 1 | |
| GSE635509-002 | VIBRATION CONTROL PANEL | 1 | |
| GSE635509A002 | VIBRATION CONTROL PANEL | 1 | |
| GSE635512-002 | ESS CONTROL PANEL | 1 | |
| GSE635521-001 | ESS CONTROL PANEL | 1 | |
| GSW81.5-1 | CLOSURE KIT, C-130J ECS CONTROLLER | 1 | |
| GU8 | Control Unit | 3 | |
| H0002 | Rigging Pin Emergency Fuel Shutoff Control | 1 | |
| H12000 | SET - LOCKING CLAMP, CONTROL SURFACES | 1 | |
| H150E-1010-1 | CONTROL HANDLE | 1 | |
| H150E-3650-1 | PRINCE CONTROL VALVE W/ LEVERS | 1 | |
| H21841-1000 | CONTROL FIXTURE | 2 | |
| H21841_1000 | CONTROL FIXTURE | 2 | |
| H250E-5500-1 | HANDLE CONTROL ASSEMBLY | 1 | |
| H91100SSL1/4OC | CONTROL VALVE | 1 | |
| HA-350A94-2785-01 | EC130 FLIGHT CONTROL RIGGING KIT | 1 | |
| HAV-501 | AIR ADJUSTING VALVE WITH GAUGE: AIR FLOW CONTROL VALVE | DEVILBISS WITH CALIBRATION | 1 | |
| HC131H0014-002 | RIGGING PIN 4, ENGINE CONTROL - TELEFLEX LEVERS | 1 | |
| HC131H0044-000 | Equip - testing system friction flying controls | 3 | |
| HCS8800 | PROGRAMMABLE TEMPERATURE CONTROLLER | 2 | |
| HE39800-1 | CONTROL CABLE - 96 IN. | 1 | |
| HE39800-2 | CONTROL CABLE - 120 IN. | 1 | |
| HE63000-1 | PRINCE CONTROL VALVE | 1 | |
| HF 622725 | CONTROL WHEEL NEUTRAL TOOL | 1 | |
| HF622725 | CONTROL WHEEL NEUTRAL TOOL | 1 | |
| HFK-02 | FLOW CONTROL TE | 8 | |
| HFK02 | TEST KIT, FLOW CONTROL - RAT | 8 | |
| HIX3010 | PITCH TRIM CONTROL | 2 | |
| HLA4422 | Precision Pressure Controller in Case | 1 | |
| HLA4424-NM | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting | 1 | |
| HLA4424-NM-GD | Precision Pressure Controller (with Case) 0-30bar/PSI High Flow Fitting | 1 | |
| HLA4424-NM-GS | Precision Pressure Controller (with Case) 0-30bar/PSI High Flow Fitting with Safety | 1 | |
| HLA4424-NM-NA | Precision Pressure Controller (with Case) 0-30bar/PSI Screw-On Fitting | 1 | |
| HLA4424-NM-PS | Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HLA6427A-GD | Precision Pressure Controller for Large Valve (with Case) | 1 | |
| HLA6427A-PD | Precision Pressure Controller for Standard Valve (with Case) | 1 | |
| HLA6599 | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting | 1 | |
| HLA6599-GD | Digital Precision Pressure Controller (with Case) 0-30bar/PSI High Flow Fitting | 1 | |
| HLA6599-GS | Digital Precision Pressure Controller (with Case) 0-30bar/PSI High Flow Fitting with Safety | 1 | |
| HLA6599-NA | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Screw-On Fitting | 1 | |
| HLA6599-PS | Digital Precision Pressure Controller (with Case) 0-30bar/PSI Standard Fitting with Safety | 1 | |
| HLA7141 | PRECISION PRESSURE CONTROLLER FOR STD AND LARGE VALVE (WITH CASE) | 1 | |
| HM04-4650212 | PIN-RIG,RUDDER CONTROL,FWD | 1 | |
| HM04650212LH | RIGGING EQUIPMENT,CONTROL COLUMN, FLIGHT CONTROLS | 1 | |
| HM04650212RH | RIGGING EQUIPMENT,CONTROL COLUMN, FLIGHT CONTROLS | 1 | |
| HM09-4650215 | RIG PIN, FLAP CONTROL | 1 | |
| HM0917085 | PIN-RIG,FLIGHT CONTROL UNIT | 1 | |
| HM28 | DIGITAL WATER MANOMETER, (LOVE CONTROLS) | 1 | |
| HMC601LP4E | LOGARITHMIC DETECTOR/CONTROLLER POWER:12DBM | 1 | |
| HMO4650212LH | RIGGING EQUIPMENT,CONTROL COLUMN, FLIGHT CONTROLS | 1 | |
| HMO4650212RH | RIGGING EQUIPMENT,CONTROL COLUMN, FLIGHT CONTROLS | 1 | |
| HMO5-4650210 | RIG PIN, CONTROL CABLES | 1 | |
| HMO5-4650210-4 | RIG PIN, CONTROL CABLES | 1 | |
| HMOS-4650215 | RIG PIN SET, AILERON CONTROL FLLOHT CONTROLS | 1 | |
| HP1000A400 | SYSTEM CONTROLLER | 1 | |
| HP1000A600 | SYSTEM CONTROLLER | 1 | |
| HP1333200-5 | BRAKE CONTROL VALVE UPPER | 1 | |
| HRT-02 | FLOW CONTROL TEST | 4 | |
| HS 9903 | PIN, CONTROL RIGGING | 3 | |
| HS5380 | PLATE - FUEL CONTROL | 1 | |
| HS7567 | TEST SET TEMP CONTROL | 1 | |
| HS8201 | STAND - CONTROL ASSEMBLY | 1 | |
| HS8273 | WRENCH CONTROL | 1 | |
| HS8644 | PULLER - MECH. CONTROL ASSEMBLY | 1 | |
| HS8784 | CONTROL DRIVE SHAFT | 1 | |
| HS8791 | ADAPTER CONTROL INLET | 1 | |
| HS8914 | SPACER CONTROL^ | 1 | |
| HS8940 | CONTROL SHAFT POSITIONER | 1 | |
| HS9368 | PROTRACTOR-CONTROL SHAFT POSITION | 1 | |
| HS9506 | SUPPORT- CONTROL BASE | 1 | |
| HS9523 | DRIVER CONTROL SHAFT B | 1 | |
| HS9549 | LIFTER - CONTROL | 1 | |
| HS9612-1 | CONTROL ASSY HOLDER | 1 | |
| HS9614 | CONTROL TORQUE BRACKET | 1 | |
| HS9808 | FIXTURE - CONTROL HOLDING | 1 | |
| HS9830 | ADAPTER - CONTROL FLUSHING | 2 | |
| HS9903 | PIN CONTROL RIGGING | 3 | |
| HSC6500GMI | TEMPERATURE CONTROLLER | 1 | |
| HST3000-UNISTIM | HST3000-UNISTIM;VOIP Signaling Call Controls for Unistim Software | 1 | |
| HST3000S-H.323 | HST3000S-H.323;VOIP Signaling Call Controls for H.323 Software | 1 | |
| HST3000S-MGCP | HST3000S-MGCP;VOIP Signaling Option for MGCP Call Control Software | 1 | |
| HST3000S-SIP | HST3000S-SIP;VOIP Signaling Option for SIP Call Control Software | 1 | |
| HT-500-010P | CONTROL BOX ASSEMBLY | 1 | |
| HTC-1 | THERMOHYGROMETER /TEMP HUM CONTROLLER | 1 | |
| HU3128/1 | ENGINE CONTROL QUAD RIGGING PIN | 1 | |
| HU31282-1 | RIGGING PIN - CONTROLS | 2 | |
| HU31282/1 | ENGINE CONTROL QUADRANT RIGGING PIN | 2 | |
| HU37831 | CONTROLLER | 1 | |
| IAE 1F10027 | IAE 1F10027 HEATER CONTROL UNIT | 1 | |
| IAE 6F10027 | HEATER CONTROL UNIT | 3 | |
| IAE1F10027 | HEATER CONTROL UNIT | 1 | |
| IAE1J12188 | BOLT PULLER (CONTROL TOOL) | 24 | |
| IAE2R18901 | THOR TEST SET (CONTROL TOOL) | 7 | |
| IAE6F10027 | HEATER CONTROL UNIT | 3 | |
| IAS-2080-01 | CONTROL BOX | 1 | |
| IAS-8030-01 | HARNESS GENX CONTROL BOX 1B/2B | 1 | |
| IDX8-IGC8-001 | IMAGE GENERATOR CONTROLLER- IGC8-1, IDX 8000 | 1 | |
| IFR 4000 | NAV COMM TEST SET (CONTROL TOOL | 33 | |
| IFR 6000 | AIR TRAFFIC CONTROL SYSTEM TEST | 28 | |
| IFR4000 | UNIT, AGE-CONTROL, RAMP TEST, IFR 4000, 110/220V | 33 | |
| IFR4000-EMB | UNIT, AGE-CONTROL, RAMP TEST, IFR 4000, 110/220V | 4 | |
| IFR6000 | UNIT, AGE-CONTROL, RAMP TEST, IFR 6000, 110/220V | 28 | |
| IFR6000-EMB | UNIT, AGE-CONTROL, RAMP TEST, IFR 6000, 110/220V | 7 | |
| IFR6000EMB | UNIT, AGE-CONTROL, RAMP TEST, IFR 6000, 110/220V | 7 | |
| IKV-447-RCT-TOOL | IMAGIK REMOTE CONTROL TOOL | 1 | |
| INTELILITE NT AMF 25 | MODULAR GEN-SET CONTROLLER | 1 | |
| IPLEX NX | OLYMPUS IPLEX NX VIDEOSCOPE ;VIEWING DIRECTION: FRONT ;VIEWING DIRECTION: SIDE ;DEPTH OF FIELD RANGE: 4 TO INFINITY MM ;POWER SUPPLY: 100-240 V AC ;FUNCTIONS: CAMERA CONTROL UNIT (CCU) | 1 | |
| IR-1759 | TE CONNECTIVITY CF0199-000 IR-1759 INFRARED HEATING TOOL, ED-7-001-MK4-230V-50HZ, CONTROL BOX, 230V | 1 | |
| IRBL 1000XL | INFRARED LAMP (WITH CONTROLLER) | 1 | |
| IRPE V3D-A | IR LAMP WITH CONTROL SYSTEM | 1 | |
| J0008 | Temperature control Testbox | 1 | |
| J121-001 | SERVO CONTROLLER | 1 | |
| J1782801 | OIL CONTROL gun (rigid tube) | 1 | |
| J1782802 | OIL CONTROL gun (flexible tube) | 1 | |
| J18126080 | 3/4" Digital Oil Control Gun | 1 | |
| J18128003 | High Flow Oil Control Gun LC Display 3/4 | 1 | |
| J21010-1 | Test Box - Flight Deck Humidifier (115VAC/28VDC Converter For Humidifier Control Valve V21005) | 2 | |
| J22002-1 | Spline Wrench - Gearbox, Autothrottle Control Stand | 3 | |
| J26002-2 | EXTENDER CARD - E/E EQUIPMENT USED ON THE MASTER DIM & TEST AND MASTER BRIGHTNESS CONTROL (MD&T/MBC) LOCATED ON THE P29 PANEL IN THE CREW CLOSET. | 4 | |
| J26004-25 | CONTROLLER - POWER SUPPLY, E/E COOLING FANS (AIRPLANES WITH ELMS-1) | 10 | |
| J26006 | CONTROLLER | 1 | |
| J26006-1 | CONTROLLER EQUIPMENT - POWER SUPPLY, ELECTRICAL/ ELECTRONIC COOLING FANS | 8 | |
| J26006-2 | CONTROLLER POWER SUPPLY COOLING FANS | 1 | |
| J26006-32 | CONTROLLER EQUIPMENT - POWER SUPPLY, ELECTRICAL/ ELECTRONIC COOLING FANS | 8 | |
| J26006-33 | Vent Fan Controller Assy | 1 | |
| J26006-34 | Supply Fan 2 Controller Assy | 1 | |
| J26006-67 | CONTROLLER - POWER SUPPLY, E/E COOLING FANS (AIRPLANE WITH ELMS-3) | 1 | |
| J27010 | ADAPTER-CONTROL WHEEL | 1 | |
| J27010-16 | ADAPTER CONTROL WHEE | 1 | |
| J27010-21 | Adaptor - Control Wheel | 1 | |
| J27010-22 | ADAPTOR CONTROL WHEEL | 1 | |
| J27010-34 | ADAPTER CONTROL WHEEL | 1 | |
| J27010-44 | CONTROL WHEEL ADAPTER | 1 | |
| J27010-56 | ADAPTER - CONTROL WHEEL | 8 | |
| J2701056 | ADAPTOR - CONTROL WHEEL | 8 | |
| J27016 | REM/INSTLEQPT-ELEVATORPOWERCONTROLUNIT(PCU) | 1 | |
| J27016-46 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT (PCU) | 15 | |
| J27016-76 | Rem/instl eqpt-elevator power control unit | 2 | |
| J27019-1 | PIN SET - BYPASS, ELEVATOR POWER CONTROL UNIT (PCU) | 13 | |
| J27027-1 | HOIST EQUIPMENT - REMOVAL/INSTALLATION, RUDDER POWER CONTROL UNIT | 6 | |
| J27027-129 | HOIST EQUIPMENT - REMOVAL/INSTALLATION, RUDDER POWER CONTROL UNIT | 1 | |
| J27027-130 | HOIST EQUIPMENT - REMOVAL/INSTALLATION, RUDDER POWER CONTROL UNIT | 3 | |
| J27027-52 | HOIST EQUIPMENT - REMOVAL/INSTALLATION, RUDDER POWER CONTROL UNIT | 10 | |
| J27028 | LOCK RUDDER AND ELEVATOR POWER CONTROL UNIT | 1 | |
| J27028-1 | LOCK - POWER CONTROL UNIT, ELEVATOR | 1 | |
| J27028-14 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT | 16 | |
| J27028-14 | LOCK - POWER CONTROL UNIT | 16 | |
| J27028-15 | LOCK, RUDDER AND ELEVATOR POWER CONTROL UNIT | 2 | |
| J27028-20 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT | 12 | |
| J27028-21 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT | 13 | |
| J27028-31 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT | 11 | |
| J27028-38 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT (PCU) | 5 | |
| J27028-39 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT (PCU) | 6 | |
| J27028-40 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT (PCU) | 4 | |
| J27028-41 | LOCK - RUDDER AND ELEVATOR POWER CONTROL UNIT (PCU) | 4 | |
| J27033 | LOCK-OUTBOARD AILERON POWER CONTROL UNIT | 1 | |
| J27033-1 | LOCK - OUTBOARD AILERON POWER CONTROL UNIT | 11 | |
| J27073-1 | TEST EQUIPMENT - ELEVATOR FEEL UNIT, LATERAL AND RUDDER CONTROLS | 2 | |
| J27073-275 | TEST EQUIPMENT - ELEVATOR FEEL UNIT, LATERAL AND RUDDER CONTROLS | 1 | |
| J27087-1 | Lock equipment-spoiler power control units | 1 | |
| J27087-35 | Lock equipment-spoiler power control units | 1 | |
| J27087-57 | LOCK EQUIPMENT - SPOILER POWER CONTROL UNITS | 2 | |
| J27120-1 | Power control unit lock-outboard aileron | 3 | |
| J27129-1 | Rudder lock-power control unit | 3 | |
| J27131-1 | Power control unit lock-elevator | 3 | |
| J27150-1 | Primary control valve removal/installation equipment-flap/slat | 1 | |
| J27157-1 | Flap lever lockout-control stand | 1 | |
| J27157-15 | FLAP LEVER LOCKOUT - CONTROL STAND | 1 | |
| J28011 | Defuel Power Control Unit | 1 | |
| J28011-1 | Auxiliary Defueling Equipment - External Power Control Unit | 1 | |
| J28011-10 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 1 | |
| J28011-11 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 2 | |
| J28011-205 | Auxiliary Defueling Equipment - External Power Control Unit | 3 | |
| J28011-305 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 2 | |
| J28011-306 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 1 | |
| J28011-313 | AUXILARY DEFUELING EQPT - EXTERNAL POWER CONTROL UNIT | 2 | |
| J28011-5 | Auxiliary Defueling Equipment - External Power Control Unit | 1 | |
| J28011-6 | Auxiliary Defueling Equipment - External Power Control Unit | 2 | |
| J28011-7 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 2 | |
| J28011-7 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 2 | |
| J28011-8 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 1 | |
| J28011-9 | AUXILIARY DEFUELING EQUIPMENT - EXTERNAL POWER CONTROL UNIT | 1 | |
| J32091-1 | Test Eqpt-Sensor Control Panel | 3 | |
| J32091-10 | Test eqpt-sensod/control panel | 4 | |
| J32091-51 | SENSOR CONTROL CASE ASSEMBLY | 1 | |
| J32091-84 | SENSOR CONTROL CASE ASSEMBLY | 1 | |
| J46002-12 | BREAKOUT BOX - FIBER OPTIC, ARINC 600 CONNECTOR (PANASONIC NETWORK CONTROLLER) | 4 | |
| J46002-24 | BREAKOUT BOX - FIBER OPTIC, ARINC 600 CONNECTOR (PANASONIC NETWORK CONTROLLER) | 1 | |
| J46002-7 | SPL-11797 BREAKOUT BOX - FIBER OPTIC, ARINC 600 CONNECTOR (CABIN SERVICES SYSTEM CONTROLLER) | 5 | |
| J47176 | OUTIL DE CONTROLE | 1 | |
| J51003-1 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | 1 | |
| J51003-59 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | 3 | |
| J51003-69 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | 2 | |
| J52011-1 | SAFETY BARRIER EQPT (CONTROL TOOL) | 14 | |
| J52047-1 | BREAKOUT BOX - CARGO GROUND SUPPORT CONTROL UNIT (CGSCU) PROXIMITY SENSOR | 3 | |
| J71045 | INTERFACE CONTROL, GE90 BOOTSTRAP / GROUND HANDLING | 1 | |
| J76001-1 | TEST FIXTURE - THRUST LEVER CONTROL STAND | 1 | |
| J76002-1 | WRENCH - SPANNER, THRUST LEVER CONTROL STAND SHAFT ASSEMBLY | 6 | |
| J76002-2 | WRENCH -0 THRUST LEVER CONTROL | 1 | |
| JHW5AS150L | AIR PUMP WITH REMOTE CONTROL | 1 | |
| JHW5AS380L | AIR PUMP WITH REMOTE CONTROL | 1 | |
| JP-046-P | CONTROLLER, NAVITAS PROGRAMMED | 2 | |
| JP046P | CONTROLLER, NAVITAS PROGRAMMED, | 2 | |
| JS-H12D | HEAT GUN WITH TEMP CONTROL | 1 | |
| K-1225 | REGULATOR CONTROL BOOSTER | 5 | |
| K.8306-22 | BENCH MOTOR WITH BUILT-IN CONTROL | 1 | |
| K09F012 | MLG CONTROL VALVE FIXTURE 737 | 1 | |
| K21016-155 | Motor Controller Adapter | 2 | |
| K24002 | DISPATCH EQPT- MOTOR CONTROLLERS | 1 | |
| K24002-1 | DISPATCH EQUIPMENT - MOTOR CONTROLLERS | 7 | |
| K24002-10 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-11 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-12 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-13 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-18 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-19 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-2 | DISPATCH EQUIPMENT - MOTOR CONTROLLERS | 8 | |
| K24002-27 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-29 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-3 | DISPATCH EQUIPMENT - MOTOR CONTROLLERS | 5 | |
| K24002-30 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-33 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-34 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-35 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-36 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-37 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-39 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-4 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-40 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-42 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-49 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-5 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-50 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-51 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-55 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-56 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-57 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-58 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-6 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-60 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-61 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-65 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-66 | DISPATCH EQPT-MOTOR CONTROLLERS | 1 | |
| K24002-71 | DISPATCH EQUIPMENT - MOTOR CONTROLLERS | 9 | |
| K24007 | BREAKOUT BOX EQPT -0 MOTOR CONTROLLERS | 1 | |
| K24007-1 | BREAKOUT BOX EQUIPMENT - MOTOR CONTROLLERS | 2 | |
| K24007-1-REVC | BREAKOUT BOX EQPT - MOTOR CONTROLLERS | 1 | |
| K24007-1/2/3 | Breakout Box - Motor Controllers | 1 | |
| K24007-2 | BREAKOUT BOX EQUIPMENT - MOTOR CONTROLLERS | 1 | |
| K24007-3 | BREAKOUT BOX EQUIPMENT - MOTOR CONTROLLERS | 1 | |
| K24007-82 | BREAKOUT BOX EQUIPMENT - MOTOR CONTROLLERS | 3 | |
| K27003-1 | ADAPTER EQUIPMENT - AILERON POWER CONTROL UNIT REMOVAL/ INSTALLATION (CE) | 9 | |
| K27004-143 | Hoist Equipment -Removal And Installation. Rudder Power Control Unit (Ce) | 1 | |
| K27004-156 | HOIST EQUIPMENT - REMOVAL AND INSTALLATION, RUDDER POWER CONTROL UNIT (CE) | 6 | |
| K27004-157 | HOIST EQUIPMENT - REMOVAL AND INSTALLATION, RUDDER POWER CONTROL UNIT (CE) | 5 | |
| K27004-158 | HOIST EQUIPMENT - REMOVAL AND INSTALLATION, RUDDER POWER CONTROL UNIT (CE) | 8 | |
| K27005-1 | Elevator Power Control Equipment | 1 | |
| K27005-63 | Removal/Installation Equipment -Elevator Power Control Unit (Ce) | 1 | |
| K27010-1 | Adapter - High Lift Hydraulic Control Unit, Remova | 1 | |
| K27010-104 | REMOVE/INSTALL EQUIPMENT - HIGH LIFT HYDRAULIC CONTROL UNIT (CE) | 4 | |
| K27010-99 | REMOVE/INSTALL EQUIPMENT - HIGH LIFT HYDRAULIC CONTROL UNIT (CE) | 3 | |
| K27013-1 | FLIGHT CONTROL ELECTRICAL LOCKOUT COVERS | 11 | |
| K27015 | LOCK AILERON POWER CONTROL UNIT | 1 | |
| K27015-10 | LOCK-AILERON POWER CONTROLUNIT | 1 | |
| K27015-17 | LOCK-AILERON POWER CONTROLUNIT | 1 | |
| K27015-18 | LOCK-AILERON POWER CONTROLUNIT | 1 | |
| K27015-20 | LOCK-AILERON POWER CONTROLUNIT | 1 | |
| K27015-21 | LOCK-AILERON POWER CONTROLUNIT | 1 | |
| K27015-24 | LOCK - AILERON POWER CONTROL UNIT (CE) | 9 | |
| K27015-24 | LOCK-AILERON POWER CONTROL UNIT | 9 | |
| K27015-5 | LOCK-AILERON POWER CONTROLUNIT | 1 | |
| K27018 | LOCK RUDDER AND ELEVATOR POWER CONTROL UNIT | 1 | |
| K27020-1 | EXTENSION - BYPASS VALVE ELEVATOR POWER CONTROL UNX | 1 | |
| K27029 | EXTENDER BREAKOUT BOX EQPT -0 FLIGHT CONTROL | 1 | |
| K27029-1 | EXTENDER BREAKOUT BOX EQUIPMENT - FLIGHT CONTROL ELECTRONICS UNIT (FCEU) | 2 | |
| K27038-1 | LOCK - RUDDER POWER CONTROL UNIT (CE) | 9 | |
| K27038-36 | LOCK - RUDDER POWER CONTROL UNIT (CE) | 7 | |
| K27040-1 | EXTENDER BREAKOUT EQUIPMENT - FLIGHT CONTROL ELECTRONICS UNIT (FCEU) | 9 | |
| K27046-15 | LOCK EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 5 | |
| K27046-31 | LOCK EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 2 | |
| K27046-42 | LOCK EQUIPMENT - ELEVATOR POWER CONTROL UNIT | 5 | |
| K27046-51 | LOCK, ELEVATOR POWER CONTROL UNIT | 6 | |
| K27046-54 | LOCK, ELEVATOR POWER CONTROL UNIT | 1 | |
| K27049-1 | Hoist Eqpt - Electronic Motor Controller | 2 | |
| K27049-54 | HOIST EQUIPMENT - ELECTRONIC MOTOR CONTROLLER, HORIZONTAL STABILIZER TRIM ACTUATOR (CE) | 1 | |
| K27049-54 to K27049-88 | Hoist eqpt-electronic motor controller，hsta | 1 | |
| K27049-78 | HOIST EQUIPMENT - ELECTRONIC MOTOR CONTROLLER, HORIZONTAL STABILIZER TRIM ACTUATOR (CE) | 1 | |
| K27049-88 | HOIST EQUIPMENT - ELECTRONIC MOTOR CONTROLLER, HORIZONTAL STABILIZER TRIM ACTUATOR (CE) | 1 | |
| K27049-90 | HOIST EQUIPMENT - ELECTRONIC MOTOR CONTROLLER, HORIZONTAL STABILIZER TRIM ACTUATOR (CE) | 1 | |
| K27049-91 | HOIST EQUIPMENT - ELECTRONIC MOTOR CONTROLLER, HORIZONTAL STABILIZER TRIM ACTUATOR (CE) | 2 | |
| K27049-95 | HOIST EQUIPMENT - ELECTRONIC MOTOR CONTROLLER, HORIZONTAL STABILIZER TRIM ACTUATOR | 5 | |
| K27056-176 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 3 | |
| K27056-177 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 3 | |
| K27056-50 | REMOVAL/INSTALLATION EQUIPMENT - ELEVATOR POWER CONTROL UNIT (CE) | 3 | |
| K27056-63 | REMOVAL/INSTALLATION EQUIPMENT -ELEVATOR POWER CONTROL UNIT (CE) | 1 | |
| K28007-1 | REMOVAL AND INSTALLATION TOOL-FUEL BOOST PUMP EXTERNAL POWER CONTROL UNIT | 6 | |
| K38002-2 | BAROMETRIC CONTROL VALVE | 3 | |
| K4538 | KIT, DC VOLTAGE CONTROL CARD, | 1 | |
| K51001 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | 1 | |
| K51001-1 | Static Balance Eqpt - Flight Control Surfaces | 1 | |
| K51001-56 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | 1 | |
| K51001-62 | STATIC BALANCE EQUIPMENT - FLIGHT CONTROL SURFACES | 1 | |
| K56001 | SLING - NUMBER 1 & 2 CONTROL CABIN WINDOWS | 1 | |
| K56001-10 | SLING SET-#1 CONTROL CAB WINDOWS | 1 | |
| K56001-11 | SLING SET-#1 CONTROL CAB WINDOWS | 1 | |
| K56001-33 | SLING SET-#1 CONTROL CAB WINDOWS | 1 | |
| K56001-34 | SLING SET-#1 CONTROL CAB WINDOWS | 1 | |
| K56001-38 | SLING SET - NUMBER 1 AND 2 CONTROL CABIN WINDOWS (CE) | 8 | |
| KAP 275/325 | FLIGHT CONTROL SYSTEM TEST SET | 1 | |
| KCCA0039-D | POWER CONTROL BOX | 1 | |
| KFC275/325 | FLIGHT CONTROL SYSTEM TEST SET | 1 | |
| KI12-1405 | TEMPERATURE CONTROL KIT | 1 | |
| KI9-5015 | MLG CONTROL VALVE KIT | 1 | |
| KIMSTP-01-1 | CONTROL MODULE SIMULATOR | 1 | |
| KPENL0291 | 901 APU DIVERTR CONTROL VALVE TESTSET | 1 | |
| KPN071-1012-00 | FREQUENCY SELECTOR CONTROL HEAD | 1 | |
| KTS-147 | Flight Control System Test Set | 1 | |
| KTS-151 | KFC200 Flight Control System Test Set | 1 | |
| KTS-154 | Flight control system test set | 1 | |
| KTS154 | FLIGHT CONTROL SYSTEM TEST SET | 1 | |
| L-240 | Isolation Amplifier and Audio Control Test Panel | 1 | |
| L-280 | ADF Control Test Panel | 1 | |
| L134M6702101 | PEDAL LOCK TAIL ROTOR CONTROL | 1 | |
| L134M6702101/PHP | PEDAL LOCK TAIL ROTOR CONTROL | 1 | |
| L134M6705101 | ALIGNMENT GAUGE CONTROL ROD | 1 | |
| L20-910 | CONTROL YOKE/RUDDER PEDALS TIE STRAP w/RBF Streamer | 1 | |
| L30-198 | CONTROL YOKE/RUDDER PEDALS TIE STRAP w/RBF Streamer | 1 | |
| L32A320-124 | CONTROL ASSY CABLE | 3 | |
| L45-910 | CONTROL YOKE/RUDDER PEDALS TIE STRAP w/RBF Streamer | 1 | |
| L50-910 | CONTROL YOKE/RUDDER PEDALS TIE STRAP w/RBF Streamer | 1 | |
| L5A1426RBY | FOAM, TOOL CONTROL KIT, ROYAL BLUE OVER YELLOW | 1 | |
| L5A1426RBYA | FOAM, TOOL CONTROL KIT, ROYAL BLUE OVER YELLOW | 1 | |
| L60-910 | CONTROL YOKE/RUDDER PEDALS TIE STRAP w/RBF Streamer | 1 | |
| L623M2003104D343-01 | INJECTING - TOOL BUSHES IN THE CONTROL RING | 1 | |
| L642G4001101 | T/R CONTROL ADJUSTMENT KIT | 1 | |
| L671M3012101D341-01 | HAND TOOL FOR CHANGING FLIGHT CONTROL LEVERS | 1 | |
| L671M3012101D341-02 | HAND TOOL TO INSTALL FLIGHT CONTROLS LEVERS | 1 | |
| LAN98F34103003000 | PITOT PRB FLSHNG TOOL (CONTROL TOOL) | 1 | |
| LANAH-057 | KIT EXTRACTOR DE PERNOS (CONTROL TOOL) | 1 | |
| LD-4 | DME Control Panel | 7 | |
| LEFT 6 CONTROLOR | FINGER TIP CONTROLOR FOR WELDING | 1 | |
| LGECU | LANDING GEAR EXTERNAL CONTROL UNIT A318-A330(A340) | 1 | |
| LHG60-01 | OIL CONTROL GUN /ELECTRONIC PRESET | 1 | |
| LISEDS10652H | CONTROL STATION | 1 | |
| LISEDS11840B | CONTROL STATION W/DOOR SHELF | 1 | |
| LJNA3006-GD | PRESSURE CONTROLLER | 1 | |
| LLA537A204 | LOCKING EQUIPMENT - PITCH TRIM CONTROL WHEEL | 3 | |
| LLA547A108 | WEDGE - LOCKING PITCH TRIM CONTROL CABLE TENSION REGULATOR | 2 | |
| LR-1 | Area NAV Control Test Panel | 1 | |
| LS0005D | GENERATOR CONTROL UNIT | 1 | |
| LSL822645 | CONTROL VALVE KIT | 1 | |
| LTCT 29012-01 | DGTL ELECTRONIC CONTROL UNIT | 1 | |
| LTCT14547 | Control Unit Assembly | 1 | |
| LTCT14547-01 | CONTROL UNIT | 1 | |
| LTCT27680-01 | ALF502/LF507 OVERSPEED CONTROL TEST SET | 4 | |
| LTCT30614-01 | Fuel Control, Fuel Pump Instrumentation, Block Fuel Temperature Assembly | 1 | |
| LTCT5444 | Kit Rigging - Fuel Control | 1 | |
| LTCT5681 | Kit Rigging - Fuel Control | 1 | |
| LW-10098-85 | CONTROLLER | 1 | |
| LXS-4 | Mode-S Transponder Control Test Panel | 1 | |
| M0T0T0KTWIN6500P | TOW TRACTOR, REMOTE CONTROL MOTOTOK | 1 | |
| M2043 | FLIGHT CONTROLS RIG PIN KIT | 1 | |
| M210D2A | RELAY AIR CONDITIONING CONTROL PANEL | 1 | |
| M21814 | REGLE DE CONTROLE | 1 | |
| M21820 | MONTAGE DE CONTROLE | 1 | |
| M21820000 | MONTAGE DE CONTROLE | 2 | |
| M2393 | RUDDER CONTROL SURFACE BACKLASH MEASUREMENT TOOL | 1 | |
| M2508 | ELEVATOR CONTROL SURFACE BACKLASH MEASUREMENT TOOL | 1 | |
| M326V7001101 | SENSOR DATA CONTROL | 1 | |
| M46292-1 | OWN TORQUE HAND TOOL FOR CONTROLLING THE APPLIED TORQUE | 4 | |
| M65723934 | ELECTRIC CONTROL BOX | 1 | |
| M65723935B | MEASURE AND CONTROL GEOMETRICAL | 1 | |
| M65724535 | ELECTRICAL CONTROL BOX | 1 | |
| M65725493 | CONTROL TOOL | 1 | |
| M65725537 | CONTROL TOOL | 1 | |
| M671V2000101 | FLIGHT CONTROL ROD PROTECTION COVER | 1 | |
| M82000189-5694 | HARNESS, UPLOAD - AMS CONTROLLER SOFTWARE | 1 | |
| M82000189-5795 | HARNESS, UPLOAD -AMS CONTROLLER SOFTWARE | 1 | |
| M82000407-010 | CONTROL TOOL | 1 | |
| M85352/2 | REMOTE CONTROLER HOUSING | 1 | |
| MA280014-24 | CABLE ASSEMBLY,CONTROL | 1 | |
| MA280024-1 | ADAPTER CABLE, BODY TANK PRE-CHECK CONTROL BOX | 1 | |
| MA280041-1 | AERIAL REFUEL PRECHECK VALVE CONTROL BOX | 1 | |
| MA290001-1 | AR PUMP HYDRAULIC CONTROL MODULE BREAKOUT BOX | 1 | |
| MA8120-2 | LOAD CELL SYSTMS (CONTROL TOOL)) | 1 | |
| MAJ 2260 | REMOTE CONTROL UNIT-OLYMPUS | 1 | |
| MAJ-2260 | REMOTE CONTROL (TECHNICAL NO: N4150200) | 1 | |
| MAP-220CLD-A | MAP-220CLD-A;MAP-220C Lightdirect Controller Replacement | 1 | |
| MAP-300A-4VOAPWC | MAP-300A-4VOAPWC;MAP-300 License to enable 4 VOA cassettes to use external power control | 1 | |
| MAP-300A-8VOAPWC | MAP-300A-8VOAPWC;MAP-300 License to enable 8 VOA cassettes to use external power control | 1 | |
| MAP-300CLD-B | MAP-300CLD-B;Controller module | 1 | |
| MAP-330CH | MAP-330CH;3-Slot 3U Half-19in Basic Mainframe no Controller | 1 | |
| MAP-380CH | MAP-380CH;8-Slot 3U 19in Basic Mainframe no Controller | 1 | |
| MAP-380RCH | MAP-380RCH;8-Slot 3U19in Reverse Basic Mainframe no Controller | 1 | |
| MAS | FLIGHT CONTROL SUPPORT TRESTLE | 1 | |
| MAX-629-2-BA | ACTUATOR CONTROL ELECTRONICS (ACE)(BUS ANALYZER-ARINC 629) | 1 | |
| MAX-MAXBOX-2629 | ACTUATOR CONTROL ELECTRONICS (ACE)(BUS ANALYZER-ARINC 629) | 1 | |
| MBBIACU2 | MBB INCIDENT ANGLE CONTROL UNIT | 1 | |
| MC-3200 | REMOTE CONTROL | 1 | |
| MC-SC-50-E-85 | PATCHCORD, MODE CONTROL, SC TO SC | 1 | |
| MC174-03-100 | CONTROL TOOL | 1 | |
| MC174-03-200 | CONTROL TOOL | 1 | |
| MC174-03-300 | CONTROL TOOL | 1 | |
| MC2600-00 | CONTROL BEZEL ASSEMBLY | 1 | |
| MC2600-01 | CONTROL BEZEL ASSEMBLY | 1 | |
| MC71-37 | RECLINE CONTROL | 1 | |
| MD-05-00-00 | PRESSURE CONTROLLER | 1 | |
| MD80 DISMANTLING TOOLS-RENTAL | ONLY FOR FLIGHT CONTROLS | 1 | |
| MFMLE53926 | 3/8 SPEED CONTROL HAMMER | 1 | |
| MG TFP-01-01 | FLIGHT CONTROL TESTING VEHICLES | 1 | |
| MH15789 | TEMPERATURE CONTROLLER | 1 | |
| MIT 65 45116 | MISC. TOOL -0 CONTROL INSTL. SPEED BRAKE | 17 | |
| MIT251A2110 | CONTROL WHEEL LOTO TOOL | 1 | |
| MIT251A2110-1 | CONTROL WHEEL LOTO TOOL | 1 | |
| MIT61B04016-35 | MISCELLANEOUS TOOL - SPEED BRAKE CONTROL | 1 | |
| MIT65-45116 | MISC. TOOL -0 CONTROL INSTL. SPEED BRAKE | 17 | |
| MIT65-51515-1 | MECHANISM INSTALLATION -0 LANDING GEAR CONTROL | 2 | |
| MIT65-76917 | CONTROL STD RETRO FIT KIT | 1 | |
| MIT65B04-001-41 | CONTROL WHEEL | 8 | |
| MIT65B04001-41 | MISCELLANEOUS TOOL - CONTROL WHEEL STRAIGHTEDGE | 8 | |
| MIT65B80307-1 | PROTRACTOR ASSEMBLY - CONTROL COLUMN | 1 | |
| MIT65B80521 | TORQUE WRENCH ADAPTER - TRIM AND CENTERING MECHANISM, LATERAL CONTROL | 2 | |
| MIT65B80549 | ADAPTER - TORQUE WRENCH, OUTBOARD ELEVATOR POWER CONTROL UNIT (PCU) | 6 | |
| MIT65B80550 | ADAPTER - TORQUE WRENCH, INBOARD ELEVATOR, POWER CONTROL UNIT | 6 | |
| MIT65B81175 | MISCELLANEOUS TOOL - CLUTCH ASSEMBLY, AUTOTHROTTLE ENGINE CONTROL | 3 | |
| MIT65B81226 | SPANNER SOCKET - FEEL UNIT ASSEMBLY, ELEVATOR CONTROL | 1 | |
| MIT65B81230 | SAFETY PIN - QUADRANT ASSEMBLY, LANDING GEAR CONTROL LEVER | 5 | |
| MIT65B82106 | SPRING INSTALLATION AND REMOVAL FIXTURE - LOAD LIMITER, AILERON CONTROL | 1 | |
| MIT65B82831 | SPLINED ADAPTER - ENGINE CONTROL, AUTOTHROTTLE CONTROL | 1 | |
| MIT65B96212 | STRAIGHT EDGE - TORQUE SHAFT, FOLLOW-UP CONTROLS, JT9D-7 | 1 | |
| MITBAC5730-2 | KIT EQUIPO PLAPPER PEENING (CONTROL TOOL) | 1 | |
| MJF320-21 | CONTROL TOOL | 1 | |
| MJF327-22 | OUT DE CONTROL | 2 | |
| MK20100-1 | PINS, RIGGING - COCK-PIT CONTROLS | 1 | |
| MM36-11-18-715-001 | REV FLOW CHECK CONTROLER TOOL | 1 | |
| MOTOROLA MODEL N1304A | SELCAL CONTROL TOWER ENCODER - MOTOROLA | 1 | |
| MPS27C/235/295-2 | TEST SET FLIGHT CONTROL SYSTEM | 4 | |
| MPS31B | AIR DATA TEST SET WITH CONTROLLER AND SO | 1 | |
| MPS49-OPTIONG2 | HANDHELD REMOTE CONTROL MPSRC | 1 | |
| MPSRE | Touch Screen Remote Control | 1 | |
| MPSREX | ATEX Touch Screen Remote Control | 1 | |
| MPSRW | WIRELESS REMOTE CONTROL UNIT | 1 | |
| MPSRW | Wireless Remote control unit | 1 | |
| MS-17987C313 | THRUST REVERSER CONTROL VALVE GROUND SAFETY PIN | 1 | |
| MS-1G-468 | CONTROL GAUGE | 1 | |
| MS-IG-468 | CONTROL GAUGE | 1 | |
| MS20003-2 | HUMIDITY CONTROLLER | 1 | |
| MS20219-1 | PULLEY, GROOVE, SECONDARY CONTROL, AIRCRAFT | 8 | |
| MS24693-S40 | CONTROL WHEEL RETAINER CLIP SCREWS | 1 | |
| MS90387-2 | TENSION-CONTROLLED CABLE TIE INSTALLATION | 3 | |
| MSU-400-T | AIR START CONTINUOUS FLOW (AERO CONTROLS INC) | 1 | |
| MSUP-SBSC | MSUP-SBSC;SB/SC Controller Application for MAP-200 Software | 1 | |
| MT018 | CONTROL REMOTE | 1 | |
| MV85623KJ225V | CLAMP - CONTROL VALVE -STRTR | 1 | |
| MVIQAP6145-A | MVIQ HANDSET WITH DUAL CONTROLLER USER INTERFACE 3 MVIQAP6145-A MENTOR VISUAL IQ QUICK CHANGE INTERCHANGE VIDEO PROBE ARTICULATING GUIDE TUBE | 1 | |
| Ms-IG-468 | CONTROL GAUGE | 1 | |
| N/A | MAIN ENGINE CONTROL UNIT | 5 | |
| N1000A | SELCAL CONTROL TOWER ENCODER - MOTOROLA | 1 | |
| N1001A | SELCAL CONTROL TOWER ENCODER - MOTOROLA | 1 | |
| N38422 | CONTROLLER, HEATING BLANKETS - 220V | 1 | |
| N4150200 | MAJ-2260 REMOTE CONTROL IV9000 | 3 | |
| NAS813-24 | APU SURGE CONTROL VALVE DISCHARGE COVER | 1 | |
| NAV402AP | TEST SET,CONTROL | 13 | |
| NB28001-1 | LOW PRESSURE CONTROLLER | 1 | |
| NB28001/1 | LOW PRESSURE CONTROLLER | 1 | |
| NB28051-1 | HIGH PRESSURE CONTROLLER | 1 | |
| NB28051/1 | HIGH PRESSURE CONTROLLER | 1 | |
| ND0075-2001 | THERMAL CONTROLLER | 1 | |
| NDT 668 | REF STD, OUTBD DEFLECTION CONTROL TRACK | 3 | |
| NDTC0NTR0LLER | TEMPERATURE CONTROLLER | 1 | |
| NDTCONTROLLER | Temperature Controller (Kit B in Airbus NDT Manual 55-20-07, 55-20- 08, 55-20-11 | 1 | |
| NEC-8012 | EDDY CURRENT PROBE SET, F-16 SIDE STICK CONTROLLER DIAPHRAGM | 1 | |
| NLC29150 | CONTROL TRANSFRMR 230V A-101 | 1 | |
| NLC29690 | CONTROL KNOB | 1 | |
| NLCLP735 | TIMER CONTROL ASSEMBLY | 1 | |
| NSC-REMOTE-CONTROL | NSC-REMOTE-CONTROL;Remote Control Option | 1 | |
| NSC-REMOTE-CONTROL-1Y | NSC-REMOTE-CONTROL-1Y;Remote Control Timed Option - 1 Year | 1 | |
| NSC-REMOTE-CONTROL-2M | NSC-REMOTE-CONTROL-2M;Remote Control Timed Option - 2 Months | 1 | |
| NSC-REMOTE-CONTROL-2Y | NSC-REMOTE-CONTROL-2Y;Remote Control Timed Option - 2 Years | 1 | |
| NSC-REMOTE-CONTROL-3Y | NSC-REMOTE-CONTROL-3Y;Remote Control Timed Option - 3 Years | 1 | |
| NSC-REMOTE-CONTROL-4Y | NSC-REMOTE-CONTROL-4Y;Remote Control Timed Option - 4 Years | 1 | |
| NSC-REMOTE-CONTROL-5Y | NSC-REMOTE-CONTROL-5Y;Remote Control Timed Option - 5 Years | 1 | |
| NSC-REMOTE-CONTROL-U1 | NSC-REMOTE-CONTROL-U1;Remote Control Upgrade Option | 1 | |
| NT1096 | DC CONTROL PANEL | 1 | |
| NT132 | AIR PRESS GAGE AND CONTROL | 1 | |
| NVG 5449 | CONTROL, COMMUNICATION | 1 | |
| NYLZ-53719 | AMS CONTROLLER LOADER INTERFACE BOX | 1 | |
| O-0001 | Adjustment Tool Servomotor control Rods | 1 | |
| O-WING-SAFETY-B757 | O/WING CONTROL VALVE SAFETY KIT TOOL | 1 | |
| O01-444-00692-000 | CONTROL BOX | 1 | |
| OCM EXPLORER SOFTWARE CS-800-06 | COMMUNICATION SOFTWARE FOR OVEN CONTROLER | 1 | |
| OHME65B81843-1 | SLING ASSEMBLY - HOIST INBOARD AILERON POWER CONTROL UNIT INSTALLATION/REMOVAL | 9 | |
| OP03-PWR-1 | EXTERNAL CONTROL CABLE & CONNECTOR | 1 | |
| OTC7068 | BUSHING SET UPPER CONTROL ARM | 1 | |
| OU131281 | PIN-RIGGING, ARTIFICIAL FEEL UNIT, ELEVATOR MECHANICAL CONTROLS. | 7 | |
| OU144765 | WRENCH- AILERON SERVOCONTROL ADJUSTMENT | 13 | |
| OU144768 | HOLDING WRENCH-AILERON SERVOCONTROL ADJUSTMENT | 11 | |
| OU145392 | FIXTURE-CONTROL | 1 | |
| OU145404 | CONTROL FIXTURE | 1 | |
| OU145914 | PIN RIGGING SET RUDDER CONTROL | 20 | |
| OU147264 | SERVO CONTROL HANDLING FIXTURE | 1 | |
| OU190364 | PIN - RIGGING, RUDDER CONTROL | 23 | |
| OU190864 | TOOL- RIGGING, SPOOL CONTROL OUTPUT, THS ACTUATOR | 9 | |
| OU191068 | RIGGING PIN SPOOL CONTROL | 9 | |
| OU191191 | CONTROL SCREW & BAR | 20 | |
| OU192147 | CONTROL TOOL | 3 | |
| OU192147-ES | CONTROL TOOL | 1 | |
| OU192148-ES | CONTROL TOOL | 1 | |
| OVENCONTROL | OVEN CONTROLLER TOOL | 1 | |
| P12503NA | DIGITAL TEMPERATURE CONTROLLER | 1 | |
| P13736 | P13736 PIN TEST THROTTLE CONTROLS | 1 | |
| P27086-1 | CONTROLLER,PASSENGER OXYGEN | 1 | |
| P2K-615A-06 | EECS ELECTRONIC CONTROL BOX | 3 | |
| P2K-LDS-09 | TELEDYNE CONTROLS DEMO SYSTEM PMAT 2000 PORTABLE M | 4 | |
| P33032-DMSL | STRAIGHT GRIP MOTOR MODULE – LEVER CONTROL | 1 | |
| P40221 | BOX CALIBRATION CONTROL TOOL | 2 | |
| P51-005 | CANOPY COVER (DUAL CONTROLS) | 1 | |
| P51-012 | CANOPY COVER (P51-A & C MODELS) dual controls) | 1 | |
| P51-805 | TRAVEL COVER, Light Weight Canopy Cover (DUAL CONTROLS) | 1 | |
| P51-820 | TRAVEL COVER, Light Weight Canopy Cover (P51-A & C MODELS) dual controls) | 1 | |
| P60517 | COVER, SHIPPING - FUEL CONTROL AND PUMP | 1 | |
| P611527 | GABARIT CONTROL BALAI | 2 | |
| P74711D | P74711D GERBER PCA-FAS-3 CONTROL. 1 | 1 | |
| PACE5000 | Single Pressure Controller Chassis | 1 | |
| PB3 | CONTROLLER SUPPORT HANDLES | 1 | |
| PC02A | Ionic Systems Pump Controller Without Fill Switch | 2 | |
| PC03A | Ionic Systems Pump Controller With Sequencer | 2 | |
| PCS400 | PRESSURE CONTROLLER | 1 | |
| PCT15042 | BLEED VALVE CONTROL UNIT | 1 | |
| PDL-615/MSD | Teledyne Controls Demo Systems PDL615 ARINC 615 Portable Data Loader | 5 | |
| PESON-0-3000 | WEIGHT CONTROL DEVICE | 1 | |
| PGRAT | FLOW CONTROL TEST | 1 | |
| PGRAT1 | FLOW CONTROL KIT | 3 | |
| PM3T1CC-AAAAAAA | PID CONTROLLER EZ-ZONE® PM (WATLOW) | 1 | |
| PM6L1EJ-AAAAAAA | LIMIT TEMPERATURE CONTROL,WATLOW | 1 | |
| POCPARCTLJ22000 | JETSTREAM 220 CONTROL PANEL | 1 | |
| POCPARCTLJ23000 | JETSTREAM 230 CONTROL PANEL | 1 | |
| POCPARCTLJ25000 | JETSTREAM 250 CONTROL PANEL | 1 | |
| POCPARCTLJ26000 | JETSTREAM 260 CONTROL PANEL | 1 | |
| POCPARCTLJ27000 | JETSTREAM 270 CONTROL PANEL | 1 | |
| POCPARKNBJS0000 | VARIABLE SPEED CONTROL KNOB | 1 | |
| PRGAT1 | FLOW CONTROL TEST - RAT | 1 | |
| PROHEAT1-9 | 93626 CONTROL BOX | 1 | |
| PS-578A | Tcas control head | 1 | |
| PS4054590-903 | AFMC SYSTEM CONTROL PANEL | 1 | |
| PS4054590-904 | AFMC SYSTEM CONTROL PANEL | 1 | |
| PS4056539 | PANEL SYSTEM CONTROL SOFTWARE | 1 | |
| PS4056539-104 | SYSTEM CONTROL PANEL SOFTWARE | 1 | |
| PS4056539-105 | SYSTEM CONTROL PANEL SOFTWARE | 1 | |
| PS4056539-107 | SYSTEM CONTROL PANEL | 1 | |
| PS4056539-108 | SYSTEM CONTROL PANEL SOFTWARE | 1 | |
| PS55495-00 | COMFORT CONTROL SYS | 1 | |
| PSD 90-1C | TEST SET,FUEL CONTROL SYSTEM | 3 | |
| PSD90-1C | TEST SET, FUEL CONTROL SYSTEM | 3 | |
| PSD90-1C-61 | TEST SET, FUEL CONTROL SYSTEM | 3 | |
| PSD90-1C/61 | TEST SET, FUEL CONTROL SYSTEM | 3 | |
| PSE/ES/2014/088 REV 1 | TOOL SET, TR PITCH CONTROL LEVER BUSHINGS REPLACEMENT | 1 | |
| PTS3000 | PC CONTROLLER | 1 | |
| PTTS-892B | TESTER - TRANSMITTER, POSITION. 105-125VAC @ 50-440HZ, 220-240HZ @ 50-60HZ, VARIABLE AMPLITUDE CONTROL 2-28VAC, VARIABLE (AVIATION SYSTEMS TECHNOLOGY) | 1 | |
| PWA 15262 | ADAPTER, SERVO TO FUEL CONTROL | 1 | |
| PWA 25672 | CONTROL, HEATER | 2 | |
| PWA 29606 | CONTROL,DUAL HEATER | 2 | |
| PWA 29754 | CONTROL, HEATER | 4 | |
| PWA 75946A | NDI TOOL CONTROL PROBE | 1 | |
| PWA 85842 | ELECTRICAL CONTROL BOX | 3 | |
| PWA101418 | PUSHER-MACHINE SCREW TCC CONTROL VALVE | 3 | |
| PWA102089 | KIT-CONTROLLER,BORESCOPE INSPECTION | 1 | |
| PWA107363 | CONTROLLER KIT - ENGINE TURNING | 1 | |
| PWA110164 | IFPC CONTROL BOX | 1 | |
| PWA110187 | KIT CONTROL | 1 | |
| PWA111679 | KIT, CONTROL | 3 | |
| PWA115120 | KIT, CONTROL | 1 | |
| PWA12126 | CONTROL HEATER | 2 | |
| PWA211441 | HANDLE, WORK- INTEGRATED FUEL PUMP AND CONTROL (IFPC) | 2 | |
| PWA25672 | CONTROL,HEATER | 2 | |
| PWA25672N | TEMPERATURE CONTROL UNIT ASSY | 1 | |
| PWA27948 | PIN-RIGGING FUEL CONTROL | 4 | |
| PWA28937 | BLEED CONTROL LEVER RIGGING PIN | 3 | |
| PWA28938 | GAGE-3.0 BLEED CONTROL FEEDBACK CABLE | 1 | |
| PWA28939 | GAGE-POSITION 3.0 BLEED CONTROL FEEDBACK CABLE BRACKE | 2 | |
| PWA28940 | ADAPTER-TORQUE 3.0 BLEED VALVE CONTROL FEEDBACK LEVER | 5 | |
| PWA29252 | LAP-ELECTRONIC ENGINE CONTROL GENERATOR SHAFT | 1 | |
| PWA29328 | ADAPTER HANDLING-FUEL CONTROL-FUEL PUMP ASSY | 1 | |
| PWA29451 | ADAPTER HYDRAULIC PUMP ENGINE VANE CONTROL (EVC) | 7 | |
| PWA29487 | CRADLE-FUEL CONTROL-FUEL PUMP ASSY | 1 | |
| PWA29606 | CONTROL, DUAL HEATER - VARIOUS COMPT_[PWA29606] | 2 | |
| PWA29754 | HEATOR CONTROL - VARIOUS SINGLE | 4 | |
| PWA29829 | JACK-BASE FUEL CONTROL | 1 | |
| PWA45238 | FUEL CONTROL LINKAGE PWR ADJST LOC | 1 | |
| PWA45246 | ADAPTER FUEL CONTROL | 7 | |
| PWA75213-2 | FOOT CONTROLLED PNEUMATIC DRIVER-BORESCOPE INSPECT | 1 | |
| PWA75737 | WRENCH-GEARBOX ELECTRONIC ENGINE CONTROL | 1 | |
| PWA76271 | KIT-ENGINE TURNING CONTROL | 1 | |
| PWA85464 | FIXTURE LOAD TCC CONTROL CABLE | 1 | |
| PWA85465 | PIN RIGGING-TCC CONTROL VALVE LINKAGE ACTUATOR | 12 | |
| PWA85705 | FIXTURE LOAD TCC CONTROL CABLE | 1 | |
| PWA85723 | PULLER-GEARBOX ELECT ENGINE CONTROL GENERATOR SEAL | 2 | |
| PWA85842 | CONTROL BOX-ELECTRICAL 2.5 BLEED ACTUATOR RIGGING | 3 | |
| PWA85842F | ELECTRICAL CONTROL BOX - RIGGING ACT | 1 | |
| PWA85982 | CONTROL BOX ELECTRICAL | 1 | |
| PWA86123 | KIT-SIMULATORS, ENGINE CONTROL SYSTEMS | 1 | |
| PWA86317 | BOX CONTROL STATOR WAVE RIGGING | 1 | |
| PWA86621 | ADAPTER REDUCER-HPC ASSY FLOW CONTROL INLET | 2 | |
| PWA88012 | PIN-LOCK,DIRECTIONAL CONTROL VALVE | 6 | |
| PWA88191 | KIT-SIMULATORS,ENGINE CONTROL SYSTEMS | 1 | |
| PWC-38163 | RIG PIN MECH FUEL CONTROL F50 | 8 | |
| PWC27219C | BAR PROPELLER CONTROL COUPLING RETAINING NUT | 1 | |
| PWC27827 | SOCKET, PROPELLER CONTROL COUPLING RETAINING NUT | 1 | |
| PWC30506 | TEST SET FULL CONTROL | 6 | |
| PWC31661 | OVERSPEED CONTROL SETTING GAGE | 1 | |
| PWC32811 | TEST SET FULL CONTROL | 8 | |
| PWC34405 | TEST SET FULL CONTROL | 8 | |
| PWC34416 | TEST SET FULL CONTROL | 9 | |
| PWC37219 | BAR, PROPELLER CONTROL COUPLING RETAINING NUT | 3 | |
| PWC37219C | BAR, PROPELLER CONTROL COUPLING RETAINING NUT | 1 | |
| PWC37825 | ADAPTER PROPELLER CONTROL COUPLING | 3 | |
| PWC37827 | SOCKET, PROP CONTROL | 7 | |
| PWC37827D | SOCKET, PROPELLER CONTROL COUPLING RETAINING NUT | 2 | |
| PWC38163 | RIGGING PIN FUEL CONTROL | 8 | |
| PWC38163A | RIG PIN MECH FUEL CONTROL F50 | 3 | |
| PWC38264 | TEMPLATE FUEL CONTROL | 6 | |
| PWC38264A | TEMPLATE,MFCU POWER AND CONTROL LEVER RIGGER | 1 | |
| PWC54003 | TEMPLATE RIGGING ENG CONTROLS | 4 | |
| PWC56871 | ADAPTER PROPELLER CONTROL COUPLING | 5 | |
| PWC57049 | Propeller Control Unit Pad Cover | 1 | |
| PWC60136 | HEATER-CONTROLLER | 3 | |
| PWC60705 | Controller | 1 | |
| PWC66810 | DRIFT, SEAL, FUEL CONTROL AND SPARE ACC. DRIVE MOUNT PADS | 4 | |
| PWC67176 | HEATER CONTROLLER | 3 | |
| PWC70787 | CONTROL LEVER FUEL MANAGEMENT MODULE | 1 | |
| PWC82001 | Cable Assembly EEC to Control | 1 | |
| PWC90034 | RIVETER SOURCE CONTROL DRAWING | 3 | |
| PWC90086 | TEST SET,FUEL CONTROL SYSTEM | 6 | |
| PWC90253 | CONTROLER-HEATHER | 1 | |
| PXS-LDS-10 | TELEDYNE CONTROLS PXS-LDS-10 – PMAT XS PORTABLE MAINTENANCE ACCESS TERMINAL | 5 | |
| Q21938 | OPERATION CHECKING CONTROL | 1 | |
| Q21955020 | ELECTRONIC TEST BOX HARNESS CONTAINING A CONTROL POTENTIOMETER | 1 | |
| Q85030050 | FLIGHT CONTROL COMPUTER (FLCC) | 1 | |
| QU191191 | CONTROL SCREW AND BAR | 1 | |
| R21871 | CONTROL TOOL | 1 | |
| RACR | R3 Retracta Control Return System | 1 | |
| RADPLUS15 | REPLACE DRAIN CONTROL VALVE | 1 | |
| RB 92700-10377-041 | PITCH CONTROL TORQUE ADAPTER | 2 | |
| RB T101356-7 | Control Link Assembly | 1 | |
| RB T101642 | Temp Control System Tester | 1 | |
| RB T101709 | Main Rotor Controls Wrench Set | 1 | |
| RB T102113 | Main Rotor Controls Scissors Assembly Ram | 1 | |
| RB T102115 | Main Rotor Controls Collective Sleeve & Hub Fixture Assembly | 1 | |
| RB T103281-102 | RIGGING TOOL, CONTROL ALTERNATE | 2 | |
| RB0006-809-00088 | Tail Rotor Pitch Control Staking Tool "C & D" Model | 3 | |
| RB23055346 | Fuel Control Governor Wrench | 2 | |
| RB6798292-B | Hinged Wrench With 5/16 Box End Fuel Control Removal | 2 | |
| RB6872546 | Bleed Valve Control Fixture Gauge | 1 | |
| RB900G1010006 | Engine Control Rig Pins (Set Of 10) | 1 | |
| RB900G8930001 | Engine Control Rig Pin | 1 | |
| RBE105- 13101W3 | DISASSEMBLY/ASSEMBLY – ROTATING CONTROL ROD | 2 | |
| RBE105-13101W3 | DISASSEMBLY/ASSEMBLY – ROTATING CONTROL ROD | 2 | |
| RBE117-43001W3 | TAIL ROTOR CONTROL FIXTURE | 1 | |
| RBE332A93-3694-00 | Tail Rotor Head Wrench Side Servo-Control | 1 | |
| RBE332A93-3694-20 | "TRH" WRENCH SIDE SERVO-CONTROL | 2 | |
| RBE332A94-2711-20 | Spanner Pitch Control Rod | 1 | |
| RBE332A94-2790-00 | Flying Control Rigging Kit | 2 | |
| RBE332A94-2792-00 | Flight Control Setting Rod | 1 | |
| RBE350A94-2700-05 | ADJUSTMENT KIT FLIGHT CONTROLS | 2 | |
| RBE703A94-2790-00 | Binding Servo Control Test Shim | 2 | |
| RBEL134M-6702-101 | Pedal Lock Tail Rotor Control | 3 | |
| RBEM632V3013101 | SERVO-CONTROL FITTINGS NUT GUIDE | 2 | |
| RBEM632V3023102 | SERVO-CONTROL AXLE EXCHANGE | 2 | |
| RBEM671V2000101 | FLIGHT CONTROL ROD PROTECTION COVER | 2 | |
| RBEM673V4001101 | TAIL SERVO CONTROL TORQUE KIT | 2 | |
| RBT18608 | Main Rotor Control Rigging Aid | 1 | |
| RBT18613 | Main Rotor Control Rigging Aid | 2 | |
| RBT18718 | Fuel Control Wrench | 1 | |
| RBW 109-3000-03-101 | PIN SET FLIGHT CONTROLS ADJUSTMENT | 2 | |
| RBW109-3000- 03-101 | PIN SET, FLIGHT CONTROLS ADJUSTMENT | 2 | |
| RBW109-3000-03-101 | Pin Set, Flight Controls Adjustment | 2 | |
| RBW109-3101- 75-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 2 | |
| RBW109-3101-75-10 | WRENCH, FLIGHT CONTROLS SERVO ACTUATOR JOINT REMOV | 1 | |
| RBW109-3101-75-101 | Wrench, Flight Controls Servo Actuator Joint Removal/Installation | 2 | |
| RBW109-3130- 85-133 | TOOL KIT, TAIL ROTOR PITCH CONTROL SHAFT BEARING R | 3 | |
| RBW109-3130-85-133 | Tool Kit, Tail Rotor Pitch Control Shaft Bearing Remove/Install | 3 | |
| RBW109-3400- 06-1 | TOOL,CONTROLLING | 2 | |
| RBW109-3400- 06-1p | TOOL ASSY,FLIGHT CONTROL SERVO-ACTUATOR LENGTH ADJUSTMENT | 1 | |
| RBW109-3400-06-1 | Flight Control Servo-Actuator Length Adjustment | 2 | |
| RBW6205G00432-3G | Main Rotor Pitch Control Link Adjustment Tool | 2 | |
| RBW6205G06131-3G | Main Rotor Pitch Control Lever Expander | 2 | |
| RBW6230G00131-8G | TOOL,M/R PITCH CONTROL LINK ADJUST | 2 | |
| RBW6405G00332-3G | Tail Rotor Pitch Control Adjustment Tool | 2 | |
| RBW6700G00133-6F | MAIN ROTOR ROTATING CONTROL ADJUSTING TOOL KIT | 2 | |
| RBW6700G02531-6F | TAIL ROTOR ROTATING CONTROL ADJUSTING TOOL KIT | 2 | |
| RBW6700G05531-8G | FLIGHT CONTROLS ADJUSTMENT TOOL KIT | 2 | |
| RBW6705G00132-3G | TOOL KIT, FIXED FLIGHT CONTROLS ADJUSTING (GF-66-00) | 2 | |
| RBW6705G00231-3G | AW139 Main Rotor Control Tool Kit | 3 | |
| RBW6705G00332-3G | Tail Rotor Rotating Controls Adjusting | 1 | |
| RBW895-3101- 05-101 | WRENCH,FLIGHT CONTROL SERVO-ACTUATOR JOINT REMOV/INSTL | 2 | |
| RBW895-3101-05-101 | Wrench Set, Flight Control Servo-Actuator Clutch Adjustment | 2 | |
| RBWSI-HT-12AS | INST'L TOOL, GROMMET, TAIL ROTOR CONTROL ROD | 3 | |
| RC-MF-BX03 | CONTROL PANEL FLIGHT CASE | 1 | |
| RC-WS-P4Z01 | CONTROL PANEL | 3 | |
| RC-WSE-ATR-L | CONTROL PANEL KIT | 1 | |
| RC-WSE-ATR-R | CONTROL PANEL KIT | 1 | |
| RC2010P102 | HAND CONTROL,ASSY,RC2000NG UNIT | 1 | |
| RC331931G01 | PS3 VACUUM KIT / FUEL CONTROL SYSTEM | 1 | |
| RCMFP4Z01 | WRCS CONTROL PANEL | 1 | |
| RCR4383 | REMOTE CONTROLLER | 1 | |
| RCWSEA320 | WRCS CONTROL PANEL | 1 | |
| RCWSP4Z01 | WRCS CONTROL PANEL | 3 | |
| RCWSP4Z02 | WRCS CONTROL PANEL | 1 | |
| RD-AV9510 | REMOTE CONTROL UNIT, {B767/B737}. | 2 | |
| RD-AV9513-01 | REMOTE CONTROLLER | 2 | |
| RDAV3001-81 | UNIT, SYSTEM CONTROL STATIC SENSITIVE | 1 | |
| RDAV3007-06 | CONTROL UNIT SYSTEM VIDEO | 1 | |
| RDKA1012-02/RD-KA1012-02 | SYSTEM CONTROLLER | 1 | |
| RIN27508269000 | CONTROL BOX-S F PCU | 1 | |
| RIN27608397000 | CONTROL BOX-SPOILER,VALVE GROUP | 1 | |
| RIN27608397000 | CONTROL BOX - SPOILER VALVE GROUP | 1 | |
| RIN28108587000 | BOX-VALVE CONTROL,ACT | 1 | |
| RM-687C | CONTROL, REMOTE | 1 | |
| RM687C | REMOTE CONTROL (SONY) | 1 | |
| RRT108682 | REMOTE CONTROL BOX | 1 | |
| RRT112901 | INTERCHANGEABLE TOOL OF THE NUT WRENCH TYPE FOR DYNAMOMETRIC HAND TOOL SUITABLE FOR THE CONTROL OF THE APPLIED TORQUE | 1 | |
| RRT112901-1 | INTERCHANGEABLE TOOL OF THE NUT WRENCH TYPE FOR DYNAMOMETRIC HAND TOOL SUITABLE FOR THE CONTROL OF THE APPLIED TORQUE | 1 | |
| RSE1021-3 | PIN - RIGGING, MAIN GEAR DOOR SELECTOR CONTROL | 1 | |
| RSE1024 | PIN - RIGGING, NOSE GEAR DOOR SEQUENCE VALVE CONTROL | 8 | |
| RSE1037 | PIN - RIGGING, NOSE GEAR DOOR SEQUENCE VALVE CONTROL | 4 | |
| RSE1041 | PIN-RIGGING, BRAKING CONTROL | 4 | |
| RSE1051 | ADAPTER-FUEL CONTROL | 2 | |
| RSE1191 | PINS, CONTROL RIGGING | 1 | |
| RSE1191 REV NC | PINS, CONTROL RIGGING | 1 | |
| RSE1241 | PLUG CONTROL ECHO COWL ECU VENT | 5 | |
| RSE3475 | LOCK-OUT PIN-HYDRAULIC CONTROL UNIT | 4 | |
| RSEI05I | ADAPTER- FUEL CONTROL | 1 | |
| RV322-1104-003 | REMOTE CONTROL TOOL | 1 | |
| S005-3 | CONTROLE MODULE | 1 | |
| S180002-1 | FLIGHT CONTROL BALANCE KIT | 1 | |
| S1820513-03 | REMOTE CONTROL PNL, RC100 KIT | 1 | |
| S1O82 | BAND SAW CONTROLLER (IN 0006638) | 1 | |
| S283N001-5 | CONTROL CARD | 1 | |
| S50188 | CONTROL UNIT | 1 | |
| S601R2822TFIX1 | Nitrogen Control Panel | 1 | |
| S604-271001TFIX1 | FIXTURE, TEST CONTROL COLUMN | 1 | |
| S604-271001TFIX1-1 | CONTROL COLUMN TEST FIXTURE | 1 | |
| SA4116B10 | POSITIONER CONTROLLER | 1 | |
| SAS165 | HAND CONTROL | 1 | |
| SASK1884 | NITROGEN CONTROL PANEL | 1 | |
| SASK1926 | OXYGEN PRESSURE CONTROL PANEL | 1 | |
| SBE1906A | CONTROL BOX (ECB) | 1 | |
| SBE2058 | CONTROL BOX | 1 | |
| SBE2058A010000 | ELECTRICAL CONTROL BOX | 1 | |
| SBE2058A020000 | CONTROL BOX | 1 | |
| SBE2173 | CLOSURE CONTROL | 1 | |
| SBE2272 | BLEED TEMP CONTROL THERMOSTAT TOOL | 1 | |
| SC-4409-25 | WRENCH; AILERON POWER CONTROL LINKAGE USED WITH | 1 | |
| SC-4409-26 | WRENCH -0 AILERON POWER CONTROL LINKAGE USED | 1 | |
| SCA-1072-800B | CONTROL VALVE (FLORIDA AERONAUTICS, INC.) | 1 | |
| SCA-540A-1 | CROWFOOT KIT WITH STEP UPS/DOWNS IN TOOL CONTROL BOX | 2 | |
| SCLTSD-520-10-05 | TEMPERATURE CONTROLLER | 1 | |
| SCR1500 | BOARD: CONTROL, | 2 | |
| SD10545-1 | RIGGING PIN ENGINE CONTROL | 1 | |
| SD12556-3 | RIGGING TOOL,FUEL CONTROL UNIT,ENGINE | 2 | |
| SD12575-1 | WRENCH, CONTROL COLUMN | 1 | |
| SE- 20007 | CONTROL WHEEL STRAIGHT EDGE | 1 | |
| SE-76-1001 | Hook - Engine Control Flexible Linkage | 1 | |
| SE27-000-1 | CONTROL WHEEL STRAIGHTEDGE | 21 | |
| SE27-0001 | Control Wheel Straightedge | 21 | |
| SE27-0001-1-WLDMT | STRAIGHTEDGE WHEEL CONTROL | 1 | |
| SE27-001 | STRIGHT EDGE CONTROL WHEEL | 1 | |
| SE270001 | CONTROL WHEEL STRAIGHTEDGE | 21 | |
| SE27–0001 | CONTROL WHEEL STRAIGHTEDGE | 21 | |
| SE76-1001 | HOOK-ENGINE CONTROL | 1 | |
| SERV-SUP-PMAT-XS | TELEDYNE CONTROLS SERV-SUP-PMAT-XS 2 YEAR ANNUAL SUPPORT REQ'D | 1 | |
| SF50-510 | WING CONTROL SURFACES HAIL PROTECTION PADS (set of 2) | 1 | |
| SG350A94-2700-06 | FLIGHT CONTROLS ADJUSTMENT KIT | 1 | |
| SK-2043-S | Dill Air Controls SK-2043-S Copper 18 NPT Female - 5,000 PSI Straight High-Pressure Hose Coupling | 2 | |
| SK-2043C | Dill Air Controls SK-2043-C Copper 18 NPT Female - 5,000 PSI Gooseneck High-Pressure Hose Coupling | 11 | |
| SK1-20760 | TOOL FOR SUPPLY AND CONTROL | 1 | |
| SK20066 | SIMULATED CONTROL COLUMN FIXTURE | 1 | |
| SK2043-3B | Dill Air Controls SK-2043-3B Schrader Valve Nut | 2 | |
| SK20740 | SUPPLY AND CONTROL TOOL | 1 | |
| SK20760 | SUPPLY AND CONTROL TOOL | 1 | |
| SK20820 | CONTROL TOOL | 1 | |
| SK2673 | 1 OFF CONTROL LOGIC BOARD | 1 | |
| SK50089 | HYDRAULIC CONTROL RIG | 1 | |
| SL90-313-1.7500 | ELEVATOR SERVO CONTROL | 1 | |
| SL90.374-1.7500 | ELEVATOR SERVO CONTROL | 3 | |
| SP22401227-CABLE | CONTROL CABLE(OEM: COLLINS AEROSPACE (EATON)) | 1 | |
| SP64132 | CONTROL OUTPUT | 1 | |
| SP67984 | ASSY TORQUE CONTROL CLUTCH SC | 1 | |
| SPK18 | HAND CONTROL KIT | 1 | |
| SPL-10126 | ADAPTER EQUIPMENT, CONTROL WHEELS | 1 | |
| SPL-10177 | RIGGING EQUIPMENT - CONTROL INSTALLATION, EL AND STAB TRIM SYSTEMS | 1 | |
| SPL-13747 | CONTROL HANDLE LOCKOUT ASSY | 1 | |
| SPL-14051 | CONTROLLER - PWR SUPPLY, E/E COOLING FANS (A/C WITH ELMS-2) | 1 | |
| SPL-14764 | TEST EQUIPMENT - AIR SUPPLY CONTROL SYSTEM | 1 | |
| SPL-1569 | CONTROL CABLE CLAMP | 1 | |
| SPL-1671 | CONTROL WHEEL STRAIGHTEDGE | 1 | |
| SPL-1675 | ASSEMBLY - LOCK, FLIGHT CONTROLS (USED ON VALVE P/N 10-60581-2 AND 10-60581-3) | 1 | |
| SPL-1680 | PROTRACTOR ASSEMBLY CONTROL COLUMN | 1 | |
| SPL-1685 | BOX TEST CUTOUT SW STAB TRIM CONTROL | 1 | |
| SPL-1705 | ADAPTER – CONTROL WHEEL | 1 | |
| SPL-1712 | LOCK-RUDDER POWER CONTROL | 1 | |
| SPL-1732 | RUDDER POWER CONTROL UNIT R/I EQPT | 1 | |
| SPL-1751 | EQUIPMENT ADAPTER CONTROL WHEEL | 1 | |
| SPL-5173 | TESTER - SENSOR, BRAKE CONTROL TORQUE | 1 | |
| SPL-9998 | WRENCH FOR FUEL CONTROL GOVERNOR | 1 | |
| SPS-3518 | TRUCK MOUNTED STAIRS - ADJUSTABLE HEIGHT BETWEEN 96" AND 228" - HYDRAULICALLY OPERATED & CONTROLLED FROM THE DRIVERS SEAT | 2 | |
| SPV82C8281317-0001 | VALVE FLOW CONTROL | 1 | |
| SS-4JBR2 | VACUUM CONTROL VALVE | 1 | |
| ST-93-3 | SPACER CONTROL DEPTH | 1 | |
| ST-93-5 | SPACER CONTROL DEPTH | 1 | |
| ST-93.3 | SPACER, CONTROL DEPTH BUSHING 0.370 THICK | 1 | |
| ST-93.5 | SPACER, CONTROL DEPTH BUSHING 0.440 THICK | 1 | |
| ST2207B | CABLE CLAMP -0 CONTROL CABLE CLAMP APPLIES | 1 | |
| ST2580-176-1 | ADAPTADOR COMPENSADOR CONTROL MOTOR | 1 | |
| ST2580-179 | ADAPTADOR TUERCA CONTROL ENCENDIDO MOTOR | 1 | |
| ST2580-185 | ENGINE CONTROL DRUM WRENCH | 5 | |
| ST42-00 | REMOTE MONITORING AND CONTROL | 1 | |
| ST42-014 | CONTROL DESK | 1 | |
| ST42-020 | CONTROL STAND FOR JACKS | 1 | |
| ST8770R | CONTROL SURFACE MISMATCH GAUGE | 1 | |
| ST95063 | TORQUE ADAPTER-FUEL CONTROL, DELTA P | 2 | |
| STA42-020 | CONTROL PANEL | 1 | |
| STD-6660 | VALE CONTROL (PRESSURE RATING 150 PSIG MIN, 3/8) | 1 | |
| STD-7000 | ARINC Bus Controller | 1 | |
| STS 060602 | TEXT BOX, FLAP CONTROL | 1 | |
| STS060602 | TEST BOX, FLAP CONTROL | 1 | |
| STS140402 | QUADRANT CONTROL TEST BOX | 1 | |
| STS230503 | MANUAL CONTROL, RAMP | 1 | |
| SW1000TOP+ | horno CONTROLTECNICA S/N SW10TF140190 | 1 | |
| SWE-18991DTT | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESS | 2 | |
| SWE189DTT | KIT - ELECTRONIC CONTROL WITH DRIVE UNIT, COMPRESSOR TURNING | 2 | |
| SYLZ50970 | CONTROLLER WINDSHIELD HEAT | 1 | |
| SYRINGE-50ML | SYRINGE-50ML ( FOR USE ON SLAT POWER CONTROL UNIT-SVC) | 1 | |
| Silverwing RMS2 – C-Scan Mapping System control unit | Silverwing RMS2 – C-Scan Mapping System control unit - Ultrasonic corrosion mapping system, Designed to evaluate the condition of ferrous structures, Inspection material thickness up to 150 mm | 1 | |
| T-30075 | TEST BOX, CONTROLLER | 1 | |
| T-7-5012-06/ AF | SLEEVE REMOVAL TOOL (PHOENIX CONTROLS AC) | 1 | |
| T-890900 | DUAL CONTROLLER 118PSI | 1 | |
| T-890900G3 | GEN3 DUAL CONTROLLER 150PSI | 1 | |
| T-MSAK-354 | CONTROL WIRE ASSEMBLY | 1 | |
| T001-00206 | MODULO CONTROL REFERENCIA | 1 | |
| T101649-101 | HANDLE, MANUAL CONTROL | 1 | |
| T101709 | MAIN ROTOR CONTROLS WRENCH SET | 1 | |
| T102113 | MAIN ROTOR CONTROLS SCISSORS ASSEMBLY RA | 1 | |
| T103206 | RIGGING TOOL TAIL ROTOR CONTROL | 1 | |
| T103206-101 | RIGGING TOOL ASSEMBLY - TAIL ROTOR CONTROL | 1 | |
| T103281-102 | RIGGING TOOL, CONTROL ALTERNATE | 1 | |
| T103286-101 | TOOL ASSEMBLY. RIGGING CYCLIC CONTROLS ALTERNATE | 1 | |
| T103287-101 | TOOL ASSEMBLY, RIGGING CYCLIC CONTROLS | 1 | |
| T103287-111 | TOOL ASSEMBLY. RIGGING CYCLIC CONTROLS ALTERNATE | 1 | |
| T103288-101 | TOOL ASSEMBLY, CYCLIC CONTROLS RIGGING | 1 | |
| T103296-101 | RIGGING TOOL, ELEVATOR CONTROL TUBE | 1 | |
| T103356-101 | CYCLIC CONTROL TOOL ASSEMBLY | 2 | |
| T1090 | CONTROLLER TEST PANEL | 1 | |
| T1200-020 | CONTROL-DISPLAY UNIT | 1 | |
| T1200-055 | CONTROL-DISPLAY UNIT | 1 | |
| T1200B | ARINC 429 Control Display Unit | 1 | |
| T1200B-220 | ARINC 429 CONTROL DISPLAY UNIT (220V) | 1 | |
| T1201-03 | CONTROL CABLE | 1 | |
| T1205A DFIU | Control Head | 1 | |
| T22280000-DFCB-1 | DISPLACEMENT AND FORCE CONTROL BOX | 1 | |
| T27300 | WRENCH FUEL CONTROL ACTUATOR | 2 | |
| T27302 | WRENCH, OFFSET BOX END, FUEL CONTROL | 4 | |
| T31316 | CONTROL BOX | 1 | |
| T316310-1 | CONTROL BOX | 1 | |
| T321458 | MHRS CONTROLLER | 1 | |
| T3214584F | MHRS COMPASS CONTROLLER TEST FIXTURE | 1 | |
| T327607-9001 | MCDU INTERFACE CONTROLLER | 1 | |
| T334745 | CONTROLLER TEST FIXTURE | 1 | |
| T5-2002-104-00 | TENSIOMETER A/C CONTROL CABLE | 14 | |
| T5-8002-104B-00 | TENSIONMETER: AIRCRAFT CONTROL CABLE | 16 | |
| T5-8003-107-00 | Tensiometer Aircraft Control Cable | 1 | |
| T5-8008-106-00 | FLIGHT CONTROL CABLE TENSION | 12 | |
| T60-1001-C9-1A | TENSIONMETER: AIRCRAFT CONTROL CABLE | 11 | |
| T60-1001C81A | TENSIONMETER CONTROL CABLE | 28 | |
| T65971 | FILTER INST-ANTISKID CONTROL VALVE | 1 | |
| T705 | TEST SET FOR CONTROL AND DISPLAY UNITS | 1 | |
| T72340002 | CONTROL RING - BARBLE EASI | 1 | |
| T78698 | TOOL CURSOR CONTROL TRACKBALL | 1 | |
| T9-1760K-1 | WRENCH - CENTER NUT, CONTROL WHEEL ASSEMBLY | 1 | |
| T9-2299K | TENSION ADJUSTER-CLIP BOARD, CONTROL WHEEL | 1 | |
| TA5033G001 | P101 CONTROL ELECTRICAL HARNESS CONTAINE | 1 | |
| TA5036G001 | P104 CONTROL ELECTRICAL HARNESS CONTAINE | 1 | |
| TB121 | Inclinometer - check angles on flying controls | 1 | |
| TC-8D | FLUIDIZED BATH TEMPERATURE CONTROLLER | 1 | |
| TC50A-2 | TORQUE CONTROLLER | 1 | |
| TCK18043BR | TOOL CONTROL KIT | 1 | |
| TCK1827BBR | KIT TOOL CONTROL B/R | 1 | |
| TCK1827BUY | KIT, TOOL CONTROL, B | 1 | |
| TCK3627BBR | KIT, TOOL CONTROL, B | 3 | |
| TCK3627BBRA | KIT, TOOL CONTROL, BLACK/RED 18X27 | 1 | |
| TCK3627BUY | TOOL CONTROL KITS, FOAM SHEET | 1 | |
| TCK3627BUYA | TOOL CONTROL KITS, FOAM SHEET | 1 | |
| TCK4020BBR | KIT TOOL CONTROL B/R | 1 | |
| TCK4020BBRA | KIT TOOL CONTROL B/R | 1 | |
| TCK4020BUY | KIT, TOOL CONTROL, B | 2 | |
| TDO2-4650218 | CONTROL POSITIONER | 1 | |
| TE-100TB | FLIGHT CONTROL RIGGING TOOL | 1 | |
| TE02-3F | LAMAR TE02-3F Generator Control Unit Test Box | 1 | |
| TE04 | LAMAR TE04-F CESSNA MASTER CONTROL UNIT TEST BOX | 1 | |
| TE04-F | LAMAR TE04-F Cessna Master Control Unit Test Box | 2 | |
| TE065D | ADAPTOR ILS CONTROL PANEL | 1 | |
| TE151284 | DIGITAL SERVO CONTROL | 1 | |
| TE523-000-00−300 | CAN CONTROL INTERFACE CABLE | 1 | |
| TE65-45121 | TEST EQUIP - CONTROL WHEEL FORCE MEASUREMENT | 1 | |
| TE65B52434 | TEST EQUIPMENT - CONTROL CABLE INSTALLATION, INFLATION SYSTEM, CREW ESCAPE | 1 | |
| TE65B80308 | FIXTURE - HOLDING, CONTROL COLUMN | 1 | |
| TE65B81226 | TEST FIXTURE - FEEL UNIT ASSEMBLY, ELEVATOR CONTROL | 1 | |
| TE65B83189 | TEST UNIT - RUDDER RATIO CONTROL SYSTEM | 4 | |
| TE79-401EFLT/935 | TEST SET, ELECTRONIC FLIGHT CONTROL | 1 | |
| TECO6-141-05 | AIR PRESSURE CONTROL (MANOMETER) | 1 | |
| TEE38 | ENGINE TRIM CONTROL BOX | 1 | |
| TEE46-4 | ENG TRIM CONTROL BOX | 2 | |
| TEE46-4B | ENG TRIM CONTROL BOX | 1 | |
| TES4052043 | TOOL-CONTROL DEVICE FLAPS(AFR) | 1 | |
| TES4054530 | POWER CONTROL UNIT | 1 | |
| TF50B27507 | MEASURING FIXTURE FOR AILERON DEFLECTION AT CONTROL COLUMN | 1 | |
| TF50B27513 | DEVICE FOR CHECKING AILERON AND ELEVATOR TORQUES APPLIED TO CONTROL COLUMN | 1 | |
| TF50B32305 | CONTROL PRESSURE | 1 | |
| TF94900-1009 | ELECTRIC TEST CABINET CONTROL PACKAGE | 1 | |
| TF94900-1011 | ELECTRIC TEST CABINET CONTROL PACKAGE | 1 | |
| TH-20 | Humidity Controller | 1 | |
| THPS 100 | MASS FLOWMETER /CONTROLLED POWER SUPPLY | 1 | |
| TIG250FP | FOOT CONTROL | 1 | |
| TIGINVFP | INNERTER FOOT CONTROL | 1 | |
| TK-1999/935 | GENERATOR CONTROL TEST UNIT | 2 | |
| TK-2368/939 | CONTROL BOX HYDRAULIC SYSTEM COMPONENTS TEST STAND | 1 | |
| TK1999/935 | GENERATOR CONTROL PANEL TEST UNIT (BEECHCRAFT CORP) | 2 | |
| TK1999/935 OR FABRICATE PER INSTRUCTIONS IN CHAPTER 24-30-00 | GENERATOR CONTROL PANEL TEST UNIT | 1 | |
| TL7148 | PIN, ENGINE CONTROL RIGGING 5/16" X 12" | 1 | |
| TL7149 | PIN, ENGINE CONTROL RIGGING 5/16" X 12" | 1 | |
| TL7150 | PIN, ENGINE CONTROL RIGGING 5/16" X 12" | 1 | |
| TL82 | PUNTAS DE PRUEBA (FLUKE) (CONTROL TOOL) | 2 | |
| TM0429G001 | CONTROL HARNESS | 3 | |
| TM0766G010 | VIBRATION CONTROL KIT | 1 | |
| TM1029G001 | CONTROL UNIT SUPPORT | 1 | |
| TM2057G001 | MAGNETIC CONTROL TOOL - METALIC | 1 | |
| TM2058G001 | CONTROL TOOL | 3 | |
| TM2101G002 | MAGNETIC CONTROL TOOL - METALIC | 1 | |
| TM2110G002 | CONTROL KIT | 1 | |
| TM2300G001 | CONDITIONING COMMAND AND CONTROL HARNESS | 1 | |
| TM2314G002 | CONTROL KIT | 2 | |
| TM2555G001 | CONTROL UNIT | 1 | |
| TM4865G001 | VIBRATION TOOL CONTROL | 2 | |
| TM4865G001R | OUTILLAGE DE CONTROLE VIBRATOIRE USAGE | 1 | |
| TM5588G001 | LEAK CONTROL TOOLS | 3 | |
| TM5663G001 | BOX TO CONTROL PRESSURE | 1 | |
| TM5697G001 | PERMEABILITY CONTROL KIT | 2 | |
| TM6936G001 | TEMPLATE,CONTROL | 3 | |
| TM7298G001 | CONTROL KIT - METALIC | 1 | |
| TM7853G001 | CONTROL SUPPORT | 1 | |
| TMH GA74-00-00 | AIR HYDRAULIC TOOL KIT (CONTROL TOOL) (CTL) | 2 | |
| TMH MD05-40-00 | PRESSURE CONTROLER FOR WHEELS | 1 | |
| TMHDI44-20-00 | CONTROL VALVE | 2 | |
| TMHDIC44-20-00-REV- | CONTROL VALVE AIR 3520 - JAUNE | 1 | |
| TMHGA74-00-00 | AIR HYDRAULIC TOOL KIT (CONTROL TOOL) (CTL) (CALIBRABLE) | 2 | |
| TMY 20-27-506 | CONTROL COLUMN FIXTURE | 1 | |
| TMY20-27-521 | CONTROL JEUX VERIN VOLET | 3 | |
| TMY20-27-601 | TOOL SET FOR PRESSURE GREASING OF FLIGHT CONTROL LINKAGE BEARINGS | 1 | |
| TOOL132 | McFarlane TOOL132 Anodized Blue 12 thru 1 Push-Pull Control Wrench Set | 1 | |
| TOOL132-11-12 | McFarlane TOOL132-1112 Anodized Blue 1116 and 34 Push-Pull Control Wrench | 1 | |
| TOOL132-14-16 | McFarlane TOOL132-1416 Anodized Blue 78 and 1 Push-Pull Control Wrench | 1 | |
| TOOL132-8-9 | McFarlane TOOL132-89 Anodized Blue 12 and 916 Push-Pull Control Wrench | 1 | |
| TP10-ARINC429 | HELICONTROL KFT | 1 | |
| TPC 10004 | TEMPERATURE CONTROLLED OVEN | 1 | |
| TPC10004-X | TEMPRATURE CONTROLLED OVEN | 1 | |
| TPC10004-X1 | TEMPERATURE CONTROL OVEN | 1 | |
| TPI196 | PROCESS CONTROL METER. | 1 | |
| TR-36 | TEST SET, CONTROL VOR/ILS | 5 | |
| TR-36M | TEST SET, CONTROL VOR/ILS | 1 | |
| TR12-18 | ELEVATOR SERVO CONTROL | 1 | |
| TR14 | Control Box | 3 | |
| TR31 | ELEVATOR SERVO CONTROL | 1 | |
| TR31-1 | PROTRACTOR - CONTROL SURFACE DEFLECTION OR RIGMASTER TR60-1 | 1 | |
| TR31-101 | PROTRACTOR - CONTROL SURFACE | 2 | |
| TR31-101 (ALT TR31-2-101) | PROTRACTOR-CONTROL SURFACE | 1 | |
| TR31-2-101 | PROTRACTOR - CONTROL SURFACE | 2 | |
| TR31/1 | PROTRACTOR - CONTROL SURFACE DEFLECTION | 1 | |
| TR31/2 | PROTRACTOR - CONTROL SURFACE DEFLECTION | 1 | |
| TR31/2-101 | PROTRACTOR-CONTROL SURFACE DEFLECTION | 2 | |
| TR31/2-101 incl. Carrying Case | PROTRACTOR - CONTROL SURFACE | 1 | |
| TR60-1 | RIGMASTER SYSTEM-FLIGHT CONTROLS | 1 | |
| TR60-2 | RIGMASTER SYSTEM-FLIGHT CONTROLS A320 | 1 | |
| TR60-2-A320 | RIGMASTER SYSTEM-FLIGHT CONTROLS | 1 | |
| TRI-DSP-SW-TCP | TRI-DSP-SW-TCP;Traffic Control Plus /TCP/ Option for New DSP Family | 1 | |
| TSF22T-11001-2 | PHENOLIC RIG PIN - LATERAL CONTROL | 1 | |
| TSF27T-11001-1 | CONTROL WHEEL | 1 | |
| TSF27T-11001-7 | CONTROL WHEEL TOOL | 1 | |
| TSJ5-87879-1 | Holding Fixture - Control Column | 1 | |
| TSJ65B80836 | DIFFERENTIAL MECHANISM ASSEMBLY - SPOILER CONTROL | 1 | |
| TSJSPZ1-4 | TEST JIG - LANDING CONTROL & LOGIC UNIT | 1 | |
| TSP3B | SHOT PEENING CONTROL (ALMEN GAGE) | 1 | |
| TST90006180-1 | FAULT LOG OF BRAKE CONTROL UNIT (BCU) | 1 | |
| TT-ONXCATV-RCIOS-SP | TT-ONXCATV-RCIOS-SP;Self-Paced - ONX CATV Remote Control Operations Using iOS App - 13 minutes | 1 | |
| TTU-597/E | TEST SET,FUEL CONTROL | 1 | |
| TWAND260 | WAND: CONTROL,TRAFFIC,LED,RED,260MM, | 1 | |
| TY1904-02A | TEST BOX: CONTROL UNIT,AR, | 1 | |
| TY1915-21A | CONTROL (ICU) | 1 | |
| TZ4L | CONTROLLER-TEMP | 1 | |
| U07A100000 | SET OF CONTROL SURFACE GUST LOCKS | 1 | |
| U1731C | LOOP CONTROLLER | 8 | |
| U21903200 | CONTROL PANEL | 1 | |
| U21960 | CONTROL TOOL | 1 | |
| U8680058 | EDDY CURRENT PROBE SET, F-16 SIDE STICK CONTROLLER DIAPHRAGM | 1 | |
| UG5046AA01 | CONTROLLER LEVEL | 2 | |
| UN8845 | SPEED CONTROL ADAPTER | 1 | |
| UT1031-1 | BLOCKER CONTROL, DEACTIVATE T/REV, RB211 | 1 | |
| UT1223 | TORQUE,MOTOR DRIVE-VSV CONTROL UNIT | 1 | |
| UT1315-1 | RIGGING PIN TELEFLEX CONTROL BRACKET RB211-535E4 | 3 | |
| UT1339-2 | AIRFLOW CONTROL TEST SET | 4 | |
| UT1523 | TORQUE,MOTOR DRIVE-VSV CONTROL UNIT | 7 | |
| UT1524 | TORQUE,MOTOR DRIVE-VSV CONTROL UNIT | 5 | |
| UT2000 | THOR TEST SET (CONTROL TOOL) | 1 | |
| UT486-1 | TEMP TEST CONTROL UNIT | 1 | |
| UT594 | ENG.CONTROLS RIGGING | 2 | |
| V1000PZ | VACUUM CLEANER_CONTROL ROOM DUST CLEANING_390 X 390 X 510 MM_[V1000PZ] | 1 | |
| VA-VT4150 | VIDEOSCOPE, 4MM, JOYSTICK CONTROLLED | 1 | |
| VA3508 | DETECTOR, CHIP, MAGNETIC INTERNAL GEARBOX-REAR (CONTROL TOOL) | 1 | |
| VE00-01-95-46101-0003 | RIGGING FEELER GAGE, ELEVATOR CONTROL | 1 | |
| VE00-03-95-46101-0003 | RIGGING FEELER GAGE, ROLL CONTROL | 1 | |
| VE113B | TOOL CONTROL BOARD PANEL A | 1 | |
| VE113C | TOOL CONTROL BOARD PANEL A | 1 | |
| VE138-1B | TOOL CONTROL BOARD PANEL D | 1 | |
| VE138-2B | TOOL CONTROL BOARD PANEL C | 1 | |
| VE138-3B | TOOL CONTROL BOARD PANEL B | 1 | |
| VE200A | TOOL CONTROL BOARD CJ2000S | 1 | |
| VE213 | TOOL CONTROL BOARD CG25108 | 1 | |
| VEGA-REMOT | FOOT REMOTE CONTROL FOR VEGA 900 UV | 1 | |
| VEOO-01-35-46102-0003 | RIGING FEELER GAGE, RUDDER CONTROL (LH/RH) | 1 | |
| VEOO-01-35-46102-0004 | RIGING FEELER GAGE, RUDDER CONTROL (RH) | 1 | |
| VEOO-01-35-46102-0005 | RIGING FEELER GAGE, RUDDER CONTROL (LH) | 1 | |
| VEOO-01-35-46102-0006 | RIGGING FEELER GAGE, RUDDER CONTROL (RH) | 1 | |
| VEOO-02-95-46101-0003 | RIGGING FEELER GAGE, RUDDER CONTROL | 1 | |
| VFI10202 | TOOL CONTROL FOD KIT | 1 | |
| VFI10203 | TOOL CONTROL FOD KIT | 1 | |
| VFI10498 | TOOL CONTROL KIT | 1 | |
| VFI10535PNP | TOOL CONTROL KIT | 1 | |
| VFI16124 | TOOL CONTROL KIT | 1 | |
| VFI21416 | TOOL CONTROL KIT | 1 | |
| VFI21454 | TOOL CONTROL KIT | 1 | |
| VFI21555PNP | TOOL CONTROL KIT PNP | 1 | |
| VFI8932RWK | TOOL CONTROL FOD KIT | 1 | |
| VFIVFSP1521 | TOOL CONTROL KIT | 1 | |
| VFIVFSP4609 | TOOL CONTROL KIT | 1 | |
| VJ2000C | CONTROL UNIT | 1 | |
| VJ2000S | CONTROL UNIT | 1 | |
| VP7S-C023 | LCD CONTROLLER | 1 | |
| VR-D41-2723-5000 | CONTROL STICK RIGGING PINS (RUDDER) | 1 | |
| VR-D41-2757-3000 | CONTROL STICK RIGGING PIN | 1 | |
| VST 15-50 | TORQUE CONTROL TOOL | 1 | |
| VST15-50 | CONTROL TOOL-TORQUE | 1 | |
| VU-941UB | CONTROL COMPUTER | 1 | |
| WCP701 | PANEL-CONTROL | 1 | |
| WD0188-00519 | FLIGHT & ENGINE A/C CONTROLS | 1 | |
| WP2-ACC-0512 | Remote Control | 1 | |
| WS-3000-X8 | WIRELESS THERMO-HYGROMETER WITH LOGGING, ALARMING, RADIO CONTROLLED CLOCK WITH 8 REMOTE SENSORS ADD A 4GB SD CARD - W/ WIRELESS ETHERNET IP MODULE | 1 | |
| WSPT055047-3A | PROMIG185X CONTROL CIRC. BOARD | 1 | |
| X130P7102101 | REINFORCED STEADY CONTROL STATION | 1 | |
| X181P4201101 | STEADY CONTROL H130 ADAPTATION KIT | 1 | |
| X181P4202101 | STEADY CONTROL TEST CASE | 1 | |
| X181P4204201 | MY STEADYCONTROL ASSEMBLY LH | 1 | |
| X270P3101101 | SERVOCONTROL BALL END ADJUSTMENT | 1 | |
| X30-232T | IMPULSE SEALER WITH TEMPERATURE CONTROL SEAL | 1 | |
| XLG3 | EQUIPO BOROSCOPICO EVEREST (CONTROL TOOL) | 3 | |
| XM508-6424-6 | XM508-6424-6 TEMPERATURE GAUGE PANASONIC AKT4B PANEL MOUNT PID TEMPERATURE CONTROLLER, 48 X 60MM 1 INPUT, 3 OUTPUT RELAY, 24 V AC/DC, 100 → 240 1 | 1 | |
| Y11T-5200-20B/1 | RUDDER CONTROL CABLE | 1 | |
| Y11T-5200-20B/2 | RUDDER CONTROL CABLE | 1 | |
| Z-2472-00 | BLOCK: CONTROL, | 1 | |
| Z220H0000110 | DRAIN CONTROL UNIT | 1 | |
| Z220H0002110 | DRAIN CONTROL UNIT | 1 | |
| ZOCG1 | Oil Control Gun Manual Tip | 1 | |
| ZOM10F | Mechanical Oil Control Gun With Flexible | 1 | |
| f 70213-1 | Break Out Box- Control Unit Fire Det | 1 | |
| f 70261-1 | Rigging Tool-Stabilizer Trim Control | 2 | |
| f 72867-1 | Control Wheel Tourque ( Thermistor Mount ) | 23 | |
| f70213-1 | Break Out Box- Control Unit Fire Det | 1 | |
| f70261-1 | Rigging Tool-Stabilizer Trim Control | 2 | |
| f72867-1 | Control Wheel Tourque ( Thermistor Mount ) | 23 | |
| 20549SI | LOOP-CONTROLLER | 5 | |
| BH401 | TEST KIT , FLOW CONTROL - RAT | 1 | |
| J27028-21 | LOCK - POWER CONTROL UNIT, RUDDER (NOTE: EFFECTIVITY OF J27028-14 FOR -200LR, -300ER & -F IS FOR ELEVATOR USE ONLY) | 13 | |
| Ð?У-27Ð | control panel | 2 | |
| А20005-9 | CLAMP-CONTROL CABLE | 1 | |
| А27021-29 | ADAPTER EQUIPMENT - CONTROL WHEELS | 1 | |
| А27063-91 | BREAKOUT BOX EQPT - POSITION SENSORS, FLIGHT CONTROLS RIGGING | 1 | |
| С27006-48 | TEST EQUIP. - CUTOUT SWITCH STAB TRIM CONTROL (COMPONENT MAINTENANCE) | 1 | |
| 97A76102003000 | SPRING SCALE ADAPTER,THROTTLE CONTROL LE | 8 | |
| 98A27208442000 | FIXTURE HINGE ARMS SERVOCONTROLS,USED TO | 3 | |
| 98A27503001000 | MANUAL DRIVE EQUIPMENT,WING FLAP CONTROL | 5 | |
| 98A27503003000 | GUARD,SAFETY EQUIPMENT,FLAP/SLAT CONTROL | 10 | |
| 98A27504022000 | CONTROL SETTING DEVICE,FLAP TRACK FAIRIN | 8 | |
| 98A27801004000 | PIN-RIGGING,KRUEGER FLAP CONTROL | 7 | |
| 98A27901000000 | PIN-RIGGING,FOR AILERON CONTROL WHEEL LO | 14 | |
| 98A27901007000 | RIGGING PIN,ELEVATOR CONTROL,USE TO SECU | 7 | |
| 98A27901009000 | RIGGING PIN,PARKING BRAKE CONTROL,USE TO | 9 | |
| 98A32301002000 | PIN-RIGGING,PARKING BRAKE CONTROL | 9 | |
| 98A32301018000 | RIGGING PIN,MAIN GEAR SELECTOR CONTROL | 5 | |
| 98A32301020000 | RIGGING PLATE,PARKING BRAKE CONTROL | 5 | |
| 98A32501002000 | RIGGING PIN,WHEEL STEERING CONTROL | 4 | |
| 98A32501006000 | RIGGING PIN,STEERING CONTROL COUPLER | 5 | |
| 98A49601000000 | PIN-RIGGING,RAM AIR TURBINE CONTROL | 4 | |
| 98A76103000000 | BAR-LOCK,THROTTLE CONTROL CABLE TENSION | 5 | |
| 98A76103004000 | ADAPTER,SPRING SCALE,T/R CONTROL LEVER | 5 | |
| RIN27608397000 | SPOILER CONTROL BOX,USED TO CHECK THE CO | 1 | |
| TR60-1 | RIGMASTER SYSTEM,FLIGHT CONTROLS,USED TO | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
