| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0235117460 | CONNECTION | 1 | |
| 1300B | CONNECTION | 1 | |
| 5502029V00 | CONNECTION | 1 | |
| 8816517000 | CONNECTION | 3 | |
| 8819795000 | CONNECTION | 3 | |
| AN919-6D | CONNECTION | 1 | |
| AS5174D0604 | CONNECTION | 2 | |
| BN-MCXR 07-010008 | CONNECTION | 1 | |
| GA47340-280 | CONNECTION | 1 | |
| K-2717 | CONNECTION | 6 | |
| MS24399D7 | CONNECTION | 5 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| M82000189-903A | CONNECTION CABLE | 1 | |
| (CALIB) AGE-00639-401 | CABLE, INTERCONNECTION CMC/PC (CALIBRATION) | 1 | |
| 001901-001-00 | TIGHTENING-FOOLPROOF CONNECTION TOOL | 8 | |
| 00433-833-000 | THREADED CONNECTION | 1 | |
| 00460-015-000 | CONNECTION ADAPTOR JACK PADS WHICH IS USING ON FEN15A21 JACK (AFT BODY), FENT101A21 JACK (FORWARD BODY) | 1 | |
| 00460-062-000 | CONNECTION ADAPTER | 1 | |
| 014567S5-20D | CONNECTIONS FOR LOW PRESSURE HPU | 3 | |
| 015567S5-12W | CONNECTIONS FOR HIGH PRESSURE HPU | 1 | |
| 046-9501501-4000 | CONNECTION ASSEMBLY A330/340 | 1 | |
| 0S22970-020 | PIPE CONNECTION | 1 | |
| 0U191230 | A340 THSA POSITION TRANSDUCER PACK CONNECTION GEAR ADJUSTMENT TOOL | 1 | |
| 101-00212 | Barfield 101-00212 Pressure Tester, 8.3 in L, 9.3 in W, 6.6 in H, 32 to 104 deg F, 1/8 in Connection | 9 | |
| 1019540-1-1- | SHROUD CONNECTION PLUG | 1 | |
| 12-634-950 | GREASE GUN: 500CC, HAND LEVER OPERATED, M10 CONNECTION [PRESSOL] | 1 | |
| 121-844 | Maillon ˆ connection rapide 316 series spaenaur | 1 | |
| 12845-575-005 | CONNECTION ADAPTER HARNESS | 2 | |
| 12BAA303 | CONNECTION CABLE 1M/40IN FOR DRIVE UNIT | 2 | |
| 135T33344-401 | INTERCONNECTION CABLE - HSD/PC | 1 | |
| 145-25-20D | CONNECTIONS FOR LOW PRESSURE HPU | 1 | |
| 155-25-12W | CONNECTIONS FOR HIGH PRESSURE HPU | 1 | |
| 16-016X-12 | ICORE/ISOFLEX 16-016X-12, CONVOLUTED CONDUIT CONNECTION TOOL | 1 | |
| 16-016X12 | CONVOLUTED CONDUIT CONNECTION TOOL | 1 | |
| 1796A010002 | LOW PRESSURE GROUND CONNECTION | 1 | |
| 189-030 | RS PRO ANALOGUE POSITIVE PRESSURE GAUGE BOTTOM ENTRY 300PSI, CONNECTION SIZE G 3/8 | 1 | |
| 196T0110-401 | CONNECTION TEST FIREX | 1 | |
| 196T08110-401 | CONNECTIONS, TEST FIREX TUBING ENGINE | 1 | |
| 1C9616G02 | LOW - PRESSURE TURBINE ROTOR, SHAFT, CONNECTION NU | 1 | |
| 2-832-02-9902 | ELECTRICAL CABLE, EQUIPPED WITH A CONNECTION PIECE, WITH A VOLTAGE OF LESS THAN 1000 V, FOR AIRCRAFT. | 1 | |
| 232NM9MF10 | RS-232 EXTENSION CABLE QAR-PC CONNECTION | 1 | |
| 24 | SPLITTER - HOSE CONNECTION (BULLARD, E.D. COMPANY) | 1 | |
| 2202 | COUPLING - GROUND CONNECTION | 1 | |
| 2700008-7 | INTERCONNECTION CABLE | 1 | |
| 2755 | ADAPTER, VALVE CONNECTION | 21 | |
| 20945 | CONNECTION CABLE BETWEEN TEST BENCH AND SMOKE DETECTOR | 1 | |
| 28.00.6569 | CABLE, INTERCONNECTION | 1 | |
| 290-387-200 | 15 MHZ DELAY TRANSDUCER, CONNECTION | 1 | |
| 2A2304 | ELECTRICAL LEAD 3 CONNECTION | 1 | |
| 2A2305 | ELECTRICAL LEAD 4 CONNECTION | 1 | |
| 2A2306 | ELECTRICAL LEAD 5 CONNECTION | 1 | |
| 2A2315 | ELECTRICAL LEAD 2 CONNECTION | 1 | |
| 2A3104 | ELECTRICAL LEAD 6 CONNECTION | 1 | |
| 2C6471P03 | E.V.M CONNECTION CABEL | 1 | |
| 30-2084-SD-02L | DIGITAL TEST GAUGE BODY MAT. 316 S.S CONNECTION 1/4" NPT, DIA. 3 INCH EXIA INTRINSICALLY SAFE IP65 TYPE: 30-2084-SD-02L 1 BARA | 1 | |
| 30100 | PDL-ARINC615/615A WITH CABLE CONNECTION TO A/C MULTIPURPOSE DISK DRIVE UNIT (MDDU) | 20 | |
| 30651.00 | ONE HANDED GREASE GUN, 400/500CCM, WITH PISTON, 1/8 BSP CONNECTIONS, RIGID ANGLED TUBE CONNECTOR 180 | 2 | |
| 3122-15X-FLAT HEX | COILHOSE MULTIPLE CONNECTION MANIFOLD | 1 | |
| 323-50 | GAUGE,PRESS, 232-50 , 0-1.6 BAR,1 /2NPT,100 GAUGES, PRESSURE RANGE 0 TO 1.6 BAR CONNECTION, PROCESS 1/2 IN NPT SIZE 100 MM (DIAMETER) | 1 | |
| 332A1301-1 | STARTER DUCT TUBE CONNECTION | 1 | |
| 332A95520100 | CONNECTIONS RINSING AIR-CONDITIONING | 1 | |
| 332A97-7671-00 | ANEMO CONNECTION CASE. | 1 | |
| 332A97340005 | GV76-1 CONNECTION CABLE | 1 | |
| 332А97-7671-00 | AIR SYSTEM CONNECTION TOOL | 1 | |
| 33A130 | CONNECTION CABLE FOR DIFFERENTIAL REFLECTION PROBES, HOCKING MODEL PHASEC 2200, LEMO 12W TO LEMO 4W CONNECTORS (HOCKING) | 1 | |
| 350A94-7500-00 | UNIT CONNECTION TOOL | 1 | |
| 3520-0610-03 | ARINC 810 MOUNTING RAIL TOOL(ELECTRICAL TEST HARNESS-3 PHASE POWER CONNECTION AC RETURN AND HAZARD GROUND) | 1 | |
| 3520-0610-05 | ARINC 810 MOUNTING RAIL TOOL(ELECTRICAL TEST HARNESS-3 PHASE POWER CONNECTION AC RETURN AND HAZARD GROUND) | 1 | |
| 365A96-6500-00 | FUEL TANKS CONNECTION CASE | 1 | |
| 38700 | AVIATION LUBE KIT - 7 PCS. W/QUICK CONNECTIONS | 1 | |
| 403475 009 | PDL-ARINC615/615A WITH CABLE CONNECTION TO A/C MULTIPURPOSE DISK DRIVE UNIT (MDDU) | 3 | |
| 403475-009 | PDL-ARINC615/615A WITH CABLE CONNECTION TO A/C MULTIPURPOSE DISK DRIVE UNIT (MDDU) | 3 | |
| 422340M0NT3 | CONNECTION CABLE | 1 | |
| 423340BANC3-002 | CONNECTION BOX | 1 | |
| 44012-12A-E17 | HYDRAULIC OIL PRESSURE OIL CONNECTION ADAPTER | 1 | |
| 48606-142 | WIRE HARNESS RS-485 BUS CONNECTION | 1 | |
| 4M-PR4-VT-SS | PASO VALVE WITH NPT 3/4 CONNECTION | 1 | |
| 5020-00 | Oxygen Refill Connection | 1 | |
| 52261A0000-01 | CONNECTION CABLES | 1 | |
| 52268A0000 | CONNECTION CABLES | 1 | |
| 52268A0000-01 | CONNECTION CABLE | 1 | |
| 6116 | GOOSENECK INFLATING CONNECTION | 4 | |
| 40871 | RACCORD/CONNECTION | 1 | |
| 53930 | OPEN END HEAD 1" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53931 | OPEN END HEAD 1.1/4" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53932 | OPEN END HEAD 1.3/8" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53933 | OPEN END HEAD 1.1/2" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53935 | OPEN END HEAD 1.7/8" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53936 | OPEN END HEAD 2" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53938 | OPEN END HEAD 2.1/2" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53939 | OPEN END HEAD 2.3/4" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53940 | OPEN END HEAD 3" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53941 | OPEN END HEAD 1.1/2" CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53942 | OPEN END HEAD 1.3/4" CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53943 | OPEN END HEAD 1.7/8" CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53944 | OPEN END HEAD 2"CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53945 | OPEN END HEAD 2.1/4" CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53946 | OPEN END HEAD 2.1/2" CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53947 | OPEN END HEAD 2.3/4" CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53948 | OPEN END HEAD 3" CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53949 | OPEN END HEAD 3.1/2" CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53950 | OPEN END HEAD 4" CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53951 | BOX END HEAD 1" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53952 | BOX END HEAD 1.1/4" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53953 | BOX END HEAD 1.3/8" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53954 | BOX END HEAD 1.1/2" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53955 | BOX END HEAD 1.3/4" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53956 | BOX END HEAD 1.7/8" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53957 | BOX END HEAD 2" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53958 | BOX END HEAD 2.1/4" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53959 | BOX END HEAD 2.1/2" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53960 | BOX END HEAD 2.3/4" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53961 | BOX END HEAD 3" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53962 | BOX END HEAD 1.1/2" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53963 | BOX END HEAD 1.3/4" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53964 | BOX END HEAD 1.7/8" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53965 | BOX END HEAD 2" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53966 | BOX END HEAD 2.1/4" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53967 | BOX END HEAD 2.1/2" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53968 | BOX END HEAD 2.3/4" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53969 | BOX END HEAD 3" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53970 | BOX END HEAD 3.1/2" - CONNECTION 27 X 36 MM FOR TORQUE WRENC | 1 | |
| 53971 | BOX END HEAD 4" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53972 | OPEN BOX END HEAD 1" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53973 | OPEN BOX END HEAD 1.1/4" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53974 | OPEN BOX END HEAD 1.3/8" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53975 | OPEN BOX END HEAD 1.1/2" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53976 | OPEN BOX END HEAD 1.3/4" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53977 | OPEN BOX END HEAD 1.7/8" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53978 | OPEN BOX END HEAD 2" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53979 | OPEN BOX END HEAD 2.1/4" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53980 | OPEN BOX END HEAD 2.1/2" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53981 | OPEN BOX END HEAD 2.3/4" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53982 | OPEN BOX END HEAD 3" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53983 | OPEN BOX END HEAD 2" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53984 | OPEN BOX END HEAD 2.1/4" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53985 | OPEN BOX END HEAD 2.1/2" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53986 | OPEN BOX END HEAD 2.3/4" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53987 | OPEN BOX END HEAD 3" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53988 | OPEN BOX END HEAD 3.1/2" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53989 | OPEN BOX END HEAD 4" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 53990 | OPEN END HEAD 22 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53991 | BOX END HEAD 22 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53993 | OPEN BOX END HEAD 22 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53995 | OPEN BOX END HEAD 27 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53996 | OPEN BOX END HEAD 41 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53997 | OPEN BOX END HEAD 46 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53998 | OPEN BOX END HEAD 55 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 53999 | OPEN BOX END HEAD 60 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 54000 | OPEN BOX END HEAD 65 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 54001 | OPEN BOX END HEAD 41 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 54002 | OPEN BOX END HEAD 46 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 54003 | OPEN BOX END HEAD 50 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 54004 | OPEN BOX END HEAD 55 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 54005 | OPEN BOX END HEAD 60 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 54006 | OPEN BOX END HEAD 65 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 54007 | OPEN BOX END HEAD 70 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 54008 | OPEN BOX END HEAD 75 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 54009 | OPEN BOX END HEAD 80 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 5502026A00 | COAXIAL CABLE FOR CONNECTION ON SIZE 1 RACK MODULES | 1 | |
| 5502030U00 | COAXIAL CABLE FOR CONNECTION ON FEMALE PROBE | 1 | |
| 555T10053-401 | ADAPTER, CLAMP SHELL CONNECTION | 1 | |
| 555T10053-401 | ADAPTER, CLAMP SHELL CONNECTION | 1 | |
| 558-2-05987 | PLUG CANISTER PRESSURE SWITCH CONNECTION | 1 | |
| 56220 | TORQUE WRENCH 2.5 -12 Nm (20-105 Lb.in) CONNECTION 9 X 12 MM | 1 | |
| 56221 | TORQUE WRENCH 6.0 -30 Nm (50-250Lb.in) CONNECTION 9x12 mm | 1 | |
| 56222 | TORQUE WRENCH 25 -125 Nm (20-90 Lb.ft) CONNECTION 9x12 mm | 1 | |
| 56223 | TORQUE WRENCH 40-200 Nm (30-150Lb.ft) CONNECTION 14x18 mm | 1 | |
| 56224 | TORQUE WRENCH 80-400 Nm (60-300 Lb.in) CONNECTION 14x18 mm | 1 | |
| 56225 | TORQUE WRENCH 100-500 Nm (80-400 Lb.ft) CONNECTION 24 X 32 MM | 1 | |
| 56242 | TORQUE WRENCH 4 -20 Nm (30-180 Lb.in) CONNECTION 9 X 12 MM | 1 | |
| 56245 | TORQUE WRENCH 10 -70 Nm (100-600 Lb.in) CONNECTION 9 X 12 MM | 1 | |
| 56246 | RATCHET HEAD 1/4" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56247 | RATCHET HEAD 3/8" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56248 | RATCHET HEAD 1/2" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56249 | TORQUE WRENCH 65-335 Nm (50-250 Lb.ft) CONNECTION 14 X 18 MM | 1 | |
| 56250 | OPEN END HEAD 7 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56251 | OPEN END HEAD 8 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56252 | OPEN END HEAD 9 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56253 | OPEN END HEAD 10 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56254 | OPEN END HEAD 11 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56255 | OPEN END HEAD 12 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56256 | OPEN END HEAD 13 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56257 | OPEN END HEAD 14 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56258 | OPEN END HEAD 15 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56259 | OPEN END HEAD 16 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56260 | OPEN END HEAD 17 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56261 | OPEN END HEAD 18 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56262 | OPEN END HEAD 19 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56264 | BOX END HEAD 7 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56265 | BOX END HEAD 8 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56266 | BOX END HEAD 9 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56267 | BOX END HEAD 10 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56268 | BOX END HEAD 11 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56269 | BOX END HEAD 12 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56270 | BOX END HEAD 13 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56271 | BOX END HEAD 14 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56272 | BOX END HEAD 15 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56273 | BOX END HEAD 16 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56274 | BOX END HEAD 17 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56275 | BOX END HEAD 18 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56276 | BOX END HEAD 19 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56277 | BOX END HEAD 21 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56278 | BOX END HEAD 22 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56279 | OPEN BOX END HEAD 10 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56280 | OPEN BOX END HEAD 11 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56281 | OPEN BOX END HEAD 12 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56282 | OPEN BOX END HEAD 13 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56283 | OPEN BOX END HEAD 14 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56284 | OPEN BOX END HEAD 16 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56285 | OPEN BOX END HEAD 17 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56286 | OPEN BOX END HEAD 18 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56287 | OPEN BOX END HEAD 19 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56288 | OPEN BOX END HEAD 21 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56289 | OPEN BOX END HEAD 22 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56290 | RATCHET HEAD 3/4" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56291 | ADJUSTABLE HEAD OPENING 5-30 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56292 | ADJUSTABLE HEAD OPENING 10-41 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56293 | OPEN BOX END HEAD 24 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56294 | BOX END HEAD 24 MM CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56443 | BOX END HEAD 7/16" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56444 | BOX END HEAD 1/4" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56445 | OPEN END HEAD 1/4" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56446 | OPEN END HEAD 5/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56447 | OPEN END HEAD 3/8" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56448 | OPEN END HEAD 7/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56449 | OPEN END HEAD 1/2" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56450 | OPEN END HEAD 9/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56451 | OPEN END HEAD 5/8" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56452 | OPEN END HEAD 11/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56453 | OPEN END HEAD 3/4" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56454 | BOX END HEAD 5/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56455 | BOX END HEAD 3/8" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56456 | BOX END HEAD 7/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56457 | BOX END HEAD 1/2" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56458 | BOX END HEAD 9/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56459 | BOX END HEAD 5/8" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56460 | BOX END HEAD 11/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56461 | BOX END HEAD 3/4" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56462 | BOX END HEAD 13/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56463 | BOX END HEAD 7/8" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 56464 | OPEN END HEAD 1/2" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56465 | OPEN END HEAD 9/16" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56466 | OPEN END HEAD 5/8" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56467 | OPEN END HEAD 11/16" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56468 | OPEN END HEAD 3/4" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56469 | OPEN END HEAD 13/16" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56470 | OPEN END HEAD 7/8" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56471 | OPEN END HEAD 15/16" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56472 | OPEN END HEAD 1" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56473 | OPEN END HEAD 1.1/8" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56474 | OPEN END HEAD 1.1/4" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56475 | BOX END HEAD 1/2" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56476 | BOX END HEAD 9/16" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56477 | BOX END HEAD 5/8" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56478 | BOX END HEAD 11/16" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56479 | BOX END HEAD 3/4" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56480 | BOX END HEAD 13/16" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56481 | BOX END HEAD 7/8" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56482 | BOX END HEAD 15/16" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56483 | BOX END HEAD 1" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56484 | OPEN END HEAD 5/8" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 56485 | OPEN END HEAD 3/4" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 56486 | OPEN END HEAD 7/8" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 56487 | OPEN END HEAD 1.1/8" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 56488 | OPEN END HEAD 1.3/4" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 56489 | OPEN END HEAD 2.1/4" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 56490 | BOX END HEAD 15/16" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 56491 | BOX END HEAD 1.1/8" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 56494 | INTERCHANGEABLE TORQUE WRENCH 300 - 1500 Nm / 200 - 1100 Lb.ft CONNECTION 27 X 36 MM | 1 | |
| 56495 | INTERCHANGEABLE TORQUE WRENCH 400 - 2000 Nm / 300 - 1500 Lb.ft CONNECTION 27 X 36 MM | 1 | |
| 56496 | INTERCHANGEABLE TORQUE WRENCH 600 - 3000 Nm / 400 - 2200 Lb.ft CONNECTION 27 X 36 MM | 1 | |
| 56510 | OPEN END HEAD 41 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56511 | OPEN END HEAD 46 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56512 | OPEN END HEAD 50 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56513 | OPEN END HEAD 55 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56514 | OPEN END HEAD 60 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56515 | OPEN END HEAD 61 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56516 | OPEN END HEAD 65 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56517 | OPEN END HEAD 70 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56518 | OPEN END HEAD 75 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56519 | OPEN END HEAD 80 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56520 | OPEN END HEAD 90 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56521 | OPEN END HEAD 95 MM CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56522 | BOX END HEAD 30 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56523 | BOX END HEAD 32 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56524 | BOX END HEAD 34 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56525 | BOX END HEAD 36 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56526 | BOX END HEAD 38 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56527 | BOX END HEAD 41 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56528 | BOX END HEAD 46 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56529 | BOX END HEAD 50 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56530 | BOX END HEAD 55 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56531 | BOX END HEAD 60 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56532 | BOX END HEAD 65 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56533 | BOX END HEAD 70 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56534 | BOX END HEAD 75 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56535 | BOX END HEAD 80 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56536 | OPEN BOX END HEAD 30 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56537 | OPEN BOX END HEAD 32 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56538 | OPEN BOX END HEAD 36 MM - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56539 | RATCHET HEAD 1" - CONNECTION 27 X 36 MM FOR TORQUE WRENCH | 1 | |
| 56540 | BOX END HEAD 28 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56541 | BOX END HEAD 34 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56542 | BOX END HEAD 36 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 56543 | BOX END HEAD 41 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 57096 | OPEN END HEAD 75 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 57097 | OPEN END HEAD 80 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 57541 | DIGITAL MINI TORQUE WRENCH 1/4" 1,5 - 30 Nm CONNECTION 9 X 12 MM with data communication | 1 | |
| 57542 | DIGITAL MINI TORQUE WRENCH 1,5 - 30 Nm CONNECTION 9 X 12 MM with data communication | 1 | |
| 57543 | DIGITAL MINI TORQUE WRENCH 3/8" 4,2 - 85 Nm CONNECTION 9 X 12 MM with data communication | 1 | |
| 57544 | DIGITAL MINI TORQUE WRENCH 4,2 - 85 Nm CONNECTION 9 X 12 MM with data communication | 1 | |
| 57562 | RATCHET HEAD 1/2" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 57563 | RATCHET HEAD 1/4" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 57564 | RATCHET HEAD 3/8" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 57572 | RATCHET HEAD 1/2" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 57585 | DIGITAL TORQUE WRENCH 1,5 - 30 Nm CONNECTION 9 X 12 MM without data communication | 1 | |
| 57586 | DIGITAL TORQUE WRENCH 6,8 - 135 Nm CONNECTION 9 X 12 MM without data communication | 1 | |
| 57587 | DIGITAL TORQUE WRENCH 10 - 200 Nm CONNECTION 14 X 18 MM without data communication | 1 | |
| 57588 | DIGITAL TORQUE WRENCH 17 - 340 Nm CONNECTION 14 X 18 MM without data communication | 1 | |
| 57589 | DIGITAL TORQUE WRENCH 1,5 - 30 Nm CONNECTION 9 X 12 MM with data communication | 1 | |
| 57590 | DIGITAL TORQUE WRENCH 6,8 - 135 Nm CONNECTION 9 X 12 MM with data communication | 1 | |
| 57591 | DIGITAL TORQUE WRENCH 10 - 200 Nm CONNECTION 14 X 18 MM with data communication | 1 | |
| 57592 | DIGITAL TORQUE WRENCH 17 - 340 Nm CONNECTION 14 X 18 MM with data communication | 1 | |
| 57595 | RATCHET HEAD WITH SAFETY BUTTON 1/4" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 57596 | RATCHET HEAD WITH SAFETY BUTTON 3/8" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 57597 | RATCHET HEAD WITH SAFETY BUTTON 1/2" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 57598 | RATCHET HEAD WITH SAFETY BUTTON 1/2" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 57599 | RATCHET HEAD 3/4" - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 58764 | DIGITAL ANGLE TORQUE WRENCH 1,5-30 Nm AND 1- 360º CONNECTION 9 X 12 MM WITH RF WIRELESS DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 58765 | DIGITAL ANGLE TORQUE WRENCH 6,8-135 Nm AND 1- 360º CONNECTION 9 X 12 MM WITH RF WIRELESS DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 58766 | DIGITAL ANGLE TORQUE WRENCH 17-340 Nm AND 1- 360º CONNECTION 14 X 18 MM WITH RF WIRELESS DATA (WITH PAL MODE) | 1 | |
| 58767 | DIGITAL TORQUE WRENCH 1/4" 1,5 - 30 Nm CONNECTION 9 X 12 MM WITH RF WIRELESS DATA COMMUNICATION | 1 | |
| 58768 | DIGITAL ANGLE TORQUE WRENCH 3/8" 6,8-135 Nm AND 1- 360º CONNECTION 9 X 12 MM WITH RF WIRELESS DATA COMMUNICATION | 1 | |
| 58769 | DIGITAL ANGLE TORQUE WRENCH 1/2" 17-340 Nm AND 1- 360º CONNECTION 14 X 18 MM WITH RF WIRELESS DATA COMMUNICATION | 1 | |
| 58775 | DIGITAL TORQUE AND ANGLE WRENCH 1/4" 1,5-30 Nm & 1-360º CONNECTION 9 X 12 MM WITH DATA COMMUNICATION | 1 | |
| 58776 | DIGITAL TORQUE AND ANGLE WRENCH 3/8" 6,8 - 135 Nm AND 1- 360º CONNECTION 9 X 12 MM WITH DATA COMMUNICATION | 1 | |
| 58777 | DIGITAL ANGLE TORQUE WRENCH 1/2" 6,8 - 135 Nm AND 1- 360º CONNECTION 9 X 12 MM WITH DATA COMMUNICATION | 1 | |
| 58778 | DIGITAL ANGLE TORQUE WRENCH 1/2" 10-200 Nm AND 1-360º CONNECTION 14 X 18 MM WITH DATA COMMUNICATION | 1 | |
| 58779 | DIGITAL ANGLE TORQUE WRENCH 1/2" 17-340 Nm AND 1-360º CONNECTION CONNECTION 14 X 18 MM WITH DATA COMMUNICATION | 1 | |
| 59014 | DIGITAL TORQUE AND ANGLE WRENCH 1,5-30 Nm & 1-360º CONNECTION 9 X 12 MM WITH DATA COMMUNICATION | 1 | |
| 59015 | DIGITAL TORQUE AND ANGLE WRENCH 6,8-135 Nm & 1-360º CONNECTION 9x12mm WITH DATA COMMUNICATION | 1 | |
| 59016 | DIGITAL TORQUE AND ANGLE WRENCH 10-200 Nm & 1-360º CONNECTION 14x18mm WITH DATA COMMUNICATION | 1 | |
| 59017 | DIGITAL TORQUE AND ANGLE WRENCH 17-340 Nm & 1-360º CONNECTION 14x18mm WITH DATA COMMUNICATION | 1 | |
| 59058 | OPEN END HEAD 23 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59059 | OPEN END HEAD 25 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59061 | OPEN END HEAD 34 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59062 | OPEN END HEAD 36 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59063 | OPEN END HEAD 38 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59064 | OPEN END HEAD 41 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59065 | OPEN BOX END HEAD 3/8" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59066 | OPEN BOX END HEAD 7/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59067 | OPEN BOX END HEAD 1/2" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59068 | OPEN BOX END HEAD 9/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59069 | OPEN BOX END HEAD 5/8" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59070 | OPEN BOX END HEAD 11/16" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59071 | OPEN BOX END HEAD 3/4" CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59072 | 1/4" HEX BIT HOLDER HEAD CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59073 | 5/16" HEX BIT HOLDER HEAD CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59075 | 5/16" HEX BIT HOLDER HEAD - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59076 | REVERSIBLE 1/4" HEX BIT HOLDER HEAD CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59077 | REVERSIBLE 5/16" HEX BIT HOLDER HEAD CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59078 | REVERSIBLE 1/4" HEX BIT HOLDER HEAD - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59079 | REVERSIBLE 5/16" HEX BIT HOLDER HEAD - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59080 | OPEN END HEAD 7/16" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59081 | OPEN END HEAD 1.1/16" CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59082 | WELD-ON HEAD CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59083 | WELD-ON HEAD - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59084 | RATCHET HEAD 1/4" 72 TEETH CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59085 | RATCHET HEAD 3/8" 72 TEETH CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59086 | RATCHET HEAD 1/2" 72 TEETH CONNECTION 9 X 12 MM FOR TORQUE WRENCH | 1 | |
| 59087 | RATCHET HEAD 3/8" 72 TEETH - CONNECTION 14 x 18 MM FOR TORQUE WRENCH | 1 | |
| 59088 | RATCHET HEAD 1/2" 72 TEETH - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59089 | RATCHET HEAD 3/4" 72 TEETH - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 59090 | STILLSON HEAD 8" FOR CONNECTION 9 X 12 | 1 | |
| 59091 | STILLSON HEAD 12" FOR CONNECTION 14 X 18 | 1 | |
| 59112 | STILLSON HEAD 18" FOR CONNECTION 24 X 32 | 1 | |
| 59113 | STILLSON HEAD 36" FOR CONNECTION 27 X 36 | 1 | |
| 59130 | DIGITAL ANGLE TORQUE WRENCH 25-500 Nm AND 1-360º CONNECTION 14x18mm WITH RF WIRELESS DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59131 | DIGITAL ANGLE TORQUE WRENCH 50-1000 Nm AND 1- 360º CONNECTION 24x32mm WITH RF WIRELESS DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59132 | DIGITAL ANGLE TORQUE WRENCH 100-2000 Nm AND 1- 360º CONNECTION 27x36mm WITH RF WIRELESS DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59133 | DIGITAL ANGLE TORQUE WRENCH 1/2" 25-500 Nm AND 1- 360º CONNECTION 14 X 18 MM WITH RF WIRELESS DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59134 | DIGITAL ANGLE TORQUE WRENCH 1" 50-1000 Nm AND 1- 360º CONNECTION 24 X 32 MM WITH RF WIRELESS DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59135 | DIGITAL ANGLE TORQUE WRENCH 1" 100-2000 Nm AND 1- 360º CONNECTION 27 X 36 MM WITH RF WIRELESS DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59176 | DIGITAL QC ANGLE TORQUE WRENCH 1,5-30 Nm AND 1-360º CONNECTION 9 X 12 MM WITH BLUETOOTH DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59177 | DIGITAL QC ANGLE TORQUE WRENCH 6,8-135 Nm AND 1-360º CONNECTION 9 X 12 MM WITH BLUETOOTH DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59178 | DIGITAL QC ANGLE TORQUE WRENCH 10-200 Nm AND 1-360º CONNECTION 14 X 18 MM WITH BLUETOOTH DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59179 | DIGITAL QC ANGLE TORQUE WRENCH 17-340 Nm AND 1-360º CONNECTION 14 X 18 MM WITH BLUETOOTH DATA COMMUNICATION (WITH PAL MODE) | 1 | |
| 59292 | DIGITAL MINI QC ANGLE TORQUE WRENCH 1,5 - 30 Nm AND 1-360º CONNECTION 9 X 12 MM WITH RF DATA COMMUNICATION | 1 | |
| 59293 | DIGITAL MINI QC ANGLE TORQUE WRENCH 4,2 - 85 Nm AND 1-360º CONNECTION 9 X 12 MM WITH RF DATA COMMUNICATION | 1 | |
| 617AAM | CONNECTION CORD | 1 | |
| 618AAM | CONNECTION CORD | 1 | |
| 619AAM | CONNECTION CORD | 1 | |
| 620-882-810-0 | Cable, Extension for connection chromelalumel assembly C54 | 1 | |
| 6200-0654 | MODULE - INPUT, VOLTAGE SIGNAL, DUAL BANANA PLUG CONNECTION | 1 | |
| 62002 | OPEN BOX END HEAD 8 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62004 | OPEN BOX END HEAD 10 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62007 | OPEN BOX END HEAD 31 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62011 | OPEN BOX END HEAD 17 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62013 | OPEN BOX END HEAD 19 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62016 | OPEN BOX END HEAD 22 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62018 | OPEN BOX END HEAD 24 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62021 | OPEN BOX END HEAD 27 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62024 | OPEN BOX END HEAD 30 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62025 | OPEN BOX END HEAD 32 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 62946 | TORQUE WRENCH 120-800 Nm CONNECTION 24 X 32 MM | 1 | |
| 62947 | TORQUE WRENCH 200-1000 Nm CONNECTION 24 X 32 MM | 1 | |
| 64612 | THREAD CONNECTION ADAPTER | 1 | |
| 64869 | OPEN END HEAD 8 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64870 | OPEN END HEAD 9 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64871 | OPEN END HEAD 10 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64872 | OPEN END HEAD 11 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64873 | OPEN END HEAD 12 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64875 | BOX END HEAD 13 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64876 | BOX END HEAD 14 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64877 | BOX END HEAD 15 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64878 | BOX END HEAD 16 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64879 | BOX END HEAD 17 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64880 | BOX END HEAD 18 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64881 | BOX END HEAD 19 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64882 | BOX END HEAD 21 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64883 | BOX END HEAD 22 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64884 | BOX END HEAD 24 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64885 | BOX END HEAD 27 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64886 | BOX END HEAD 30 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 64887 | BOX END HEAD 32 MM - CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65369 | OPEN END HEAD 13 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65370 | OPEN END HEAD 14 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65371 | OPEN END HEAD 15 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65372 | OPEN END HEAD 16 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65373 | OPEN END HEAD 17 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65374 | OPEN END HEAD 18 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65375 | OPEN END HEAD 19 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65376 | OPEN END HEAD 21 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65377 | OPEN END HEAD 22 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65378 | OPEN END HEAD 24 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65379 | OPEN END HEAD 26 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65380 | OPEN END HEAD 27 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65381 | OPEN END HEAD 29 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65382 | OPEN END HEAD 30 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65383 | OPEN END HEAD 32 MM CONNECTION 14 X 18 MM FOR TORQUE WRENCH | 1 | |
| 65384 | RATCHET HEAD 3/8" - CONNECTION 14 X 18 MM MM FOR TORQUE WRENCH | 1 | |
| 65385 | RATCHET HEAD 1/2" - CONNECTION 14 X 18 MM MM FOR TORQUE WRENCH | 1 | |
| 66001 | TORQUE WRENCH 2.5 -12 Nm (20-105 Lb.in) CONNECTION Ø 16 | 1 | |
| 66002 | TORQUE WRENCH 6.0 -30 Nm (50-250 Lb.in) CONNECTION Ø 16 | 1 | |
| 66004 | TORQUE WRENCH 40 - 200 Nm (30 - 150 Lb.ft) CONNECTION Ø 16 | 1 | |
| 66005 | TORQUE WRENCH 65 - 335 Nm (50 - 250 Lb.ft) CONNECTION Ø 16 | 1 | |
| 66006 | TORQUE WRENCH 80 - 400 Nm (60 - 300 Lb.ft) CONNECTION Ø 16 | 1 | |
| 66007 | TORQUE WRENCH 200 - 1000 Nm (150 - 750 Lb.ft) CONNECTION Ø 22 | 1 | |
| 66008 | RATCHET HEAD 1/4" - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66009 | RATCHET HEAD 3/8" CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66010 | RATCHET HEAD 1/2" - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66012 | BOX END HEAD 8 MM - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66014 | BOX END HEAD 10 MM - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66017 | BOX END HEAD 13 MM - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66021 | BOX END HEAD 17 MM - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66023 | BOX END HEAD 19 MM - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66026 | BOX END HEAD 22 MM - CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66028 | BOX END HEAD 24 MM - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66031 | BOX END HEAD 27 MM - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66034 | BOX END HEAD 30 MM - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66036 | BOX END HEAD 32 MM - CONNECTION Ø16 FOR TORQUE WRENCH | 1 | |
| 66045 | OPEN END HEAD 8 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66197 | OPEN END HEAD 10 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66200 | OPEN END HEAD 13 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66204 | OPEN END HEAD 17 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66206 | OPEN END HEAD 19 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66209 | OPEN END HEAD 22 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66211 | OPEN END HEAD 24 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66214 | OPEN END HEAD 27 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66216 | OPEN END HEAD 29 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66217 | OPEN END HEAD 30 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66219 | OPEN END HEAD 32 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66220 | OPEN END HEAD 36 MM CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66236 | OPEN END HEAD 7/8" CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66239 | OPEN END HEAD 1.1/16" CONNECTION Ø 16 FOR TORQUE WRENCH | 1 | |
| 66260 | RATCHET HEAD 1" - CONNECTION Ø22 FOR TORQUE WRENCH | 1 | |
| 68217 | OPEN BOX END HEAD 24 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68240 | RATCHET HEAD 3/4" - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68241 | RATCHET HEAD 1" CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68242 | OPEN END HEAD 20 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68243 | OPEN END HEAD 24 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68244 | OPEN END HEAD 27 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68245 | OPEN END HEAD 28 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68246 | OPEN END HEAD 30 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68247 | OPEN END HEAD 32 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68248 | OPEN END HEAD 34 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68249 | OPEN END HEAD 36 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68250 | OPEN END HEAD 38 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68251 | OPEN END HEAD 41 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68252 | OPEN END HEAD 45 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68253 | OPEN END HEAD 46 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68254 | OPEN END HEAD 50 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68255 | OPEN END HEAD 55 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68256 | OPEN END HEAD 60 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68257 | OPEN END HEAD 65 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68258 | OPEN END HEAD 67 MM CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68259 | OPEN END HEAD 70 MM -CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68260 | BOX END HEAD 24 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68261 | BOX END HEAD 30 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68262 | BOX END HEAD 32 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68263 | BOX END HEAD 34 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68264 | BOX END HEAD 36 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68265 | BOX END HEAD 38 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68266 | BOX END HEAD 41 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68267 | BOX END HEAD 46 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68268 | BOX END HEAD 50 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68269 | BOX END HEAD 55 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68270 | BOX END HEAD 60 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68271 | BOX END HEAD 65 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68272 | BOX END HEAD 70 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68273 | OPEN BOX END HEAD 19 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68274 | OPEN BOX END HEAD 30 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68275 | OPEN BOX END HEAD 32 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68276 | OPEN BOX END HEAD 36 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68277 | OPEN BOX END HEAD 38 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68278 | OPEN BOX END HEAD 50 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68279 | OPEN BOX END HEAD 70 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 68554 | BOX END HEAD 27 MM - CONNECTION 24 X 32 MM FOR TORQUE WRENCH | 1 | |
| 76073 | GROUND CONNECTION FOR ATEX FANS | 1 | |
| 101040 | GAUGE PRESSURE 0-1400KPA 1IN NPT BOTTOM CONNECTION MODEL 233.30.100 WIKA 68146043 | 1 | |
| 0108484 | BOX-CONNECTION, ELECTRICAL | 1 | |
| 180110 | DETACHABLE CONNECTION - RAPID FEMALE - 1/4", | 1 | |
| 214384 | RELEASE KEY FOR SAAS ANCHORS AND CCS CONNECTIONS | 1 | |
| 472082 | TURBO WATER CONNECTION SPANNER | 1 | |
| 1020045 | STEEL CONNECTION FITTING 1/4 NPT (M) | 1 | |
| 1020127 | BRASS REDUCER CONNECTION 1/4 NPT (M) TO 1/8 NPT (F) | 1 | |
| 2001494 | Oxygen charge adapter. JIC/AN-4 " male flared tube" connected by 1" tube with AN800-3 aircraft connection and dust cap. | 1 | |
| 2002203 | Oxygen Charge Adapter. JIC/AN-4 " Male Flared Tube" connected by 8" tube with AN800-3 Aircraft Connection. | 1 | |
| 2002205 | Oxygen Charge Adapter. JIC/AN-4 " Male Flared Tube" connected by 3" bendable tube with AN800-3 Aircraft Connection. | 1 | |
| 2002628 | Low Pressure Tire/Strut Service Gauge: *Digital* Nitrogen (300psi). Bleed Valve, Inlet valve stem connection (m 0.305-32). Outlet hose 18 inch w/valve stem (f 0.305-32). Calibrated gauge with certificates. | 1 | |
| 2002629 | Low Pressure Tire/Strut Service Gauge: Nitrogen (300psi). Bleed Valve, Inlet valve stem connection (m 0.305-32). Outlet hose 18 inch w/valve stem (f 0.305-32). Calibrated gauge with certificates. | 1 | |
| 2002755 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 3" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002756 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 8" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002758 | Oxygen Charge Adapter Combo- 2500 PSI Max- 1/4 Male NPT Inlet connection- Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002759 | Inflating valve adapter, without core depressing pin, 3000 max PSI, Inlet connection (F. 1/8 NPT) Outlet connection (F. threads 0.305-32) | 1 | |
| 2002760 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-4 M JIC), Outlet connection (F threads 0.305-32) | 1 | |
| 2002761 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (-3 M JIC), Outlet connection (F threads 0.305-32) | 1 | |
| 2002763 | Strut Service Valve Adapter Inflating connection with core depressor pin, 3000 max PSI, Inlet connection (1/8 NPTF), Outlet connection (F threads 0.305-32) | 1 | |
| 2002764 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 3" bendable tube with AN800-3 Aircraft Connection. | 1 | |
| 2002766 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 1" bendable tube with AN800-3 Aircraft Connection. | 1 | |
| 2002768 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 8" tube with AN800-3 Aircraft Connection. | 1 | |
| 2003315 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2528141 | SPECIAL-PURPOSE CONNECTION | 1 | |
| 2700042 | INTERCONNECTION PEC MANUAL TEST BOX | 1 | |
| 2700119 | INTERCONNECTION TEST BOX | 1 | |
| 3065000 | ONE HANDED GREASE GUN, 400/500CCM, WITH PISTON, 1/8 BSP CONNECTIONS, RIGID ANGLED TUBE CONNECTOR 180 | 1 | |
| 3065100 | ONE HANDED GREASE GUN, 400/500CCM, WITH PISTON, 1/8 BSP CONNECTIONS, RIGID ANGLED TUBE CONNECTOR 180 | 2 | |
| 4409023 | ARINC 810 MOUNTING RAIL TOOL(ELECTRICAL TEST HARNESS-3 PHASE POWER CONNECTION AC RETURN AND HAZARD GROUND) | 1 | |
| 30002395 | CONNECTION TO AIR SUPPLY FOR TESTS | 1 | |
| 30002525 | CONNECTION TO AIR SUPPLY FOR TESTS | 1 | |
| 52110058 | 7751-3 CONNECTION CABLE | 1 | |
| 0177697800 | INTERCONNECTION MODULE | 1 | |
| 0235297050 | CONNECTION PLATE | 1 | |
| 0298707080 | BLOCK,CONNECTION | 1 | |
| 0298717330 | BLOCK,CONNECTION | 1 | |
| 0298727550 | BLOCK,CONNECTION | 1 | |
| 4600067156 | CHARGING ADAPTOR (UPPER CONNECTION) | 1 | |
| 68307-134-1 | CONNECTION BOX | 1 | |
| 68307-135-1 | CONNECTION BOX | 1 | |
| 68307-136-1 | CONNECTION BOX | 1 | |
| 68307-137-1 | CONNECTION BOX | 1 | |
| 68307-140-1 | CONNECTION BOX | 1 | |
| 68307-141-1 | CONNECTION BOX | 1 | |
| 68307-142-1 | CONNECTION BOX | 1 | |
| 68307-143-1 | CONNECTION BOX | 1 | |
| 6877015 | PURGE FIXTURE, ARGON, PRIMARY BODY PROVIDES ARGON PURGE CONNECTION DURING PRIMARY BODY WELDING PROCEDURE. | 1 | |
| 6877016 | PURGING AND HEAT SINK FIXTURE (FOR NOZZLES PROVIDES ARGON PURGE CONNECTION WITH WEAR SLEEVES) AND DISSIPATES HEAT DURING SECONDARY BODY WELDING PROCEDURE. | 1 | |
| 6877017 | PURGING AND HEAT SINK FIXTURE (FOR NOZZLES PROVIDES ARGON PURGE CONNECTION WITHOUT WEAR SLEEVES) AND DISSIPATES HEAT DURING SECONDARY BODY WELDING PROCEDURE. | 1 | |
| 6877034 | INLET EXTENSION AIDS CONNECTION OF FUEL NOZZLE TO FUEL NOZZLE TEST STAND. | 1 | |
| 6897101 | TEST FIXTURE, INLET PLUG PROVIDES SEPARATE PRIMARY AND SECONDARY INLET FLUID CONNECTIONS DURING SUPPORT TESTING. | 1 | |
| 703A97-6339-32 | CABLE SET: VPU CONNECTION CABLE / HUMS ONLY [AS365/EC155/AS332] | 1 | |
| 7347114-30 | HIGH PRESSURE INFLATING CONNECTION | 1 | |
| 736-030 | CONNECTION - FILL | 1 | |
| 777357-02 | CONNECTION CABLE BETWEEN TEST BENCH AND COMPUTER (OUT) | 1 | |
| 8083-10 | LIGHT CONNECTION ADAPTER | 1 | |
| 8218-5201 | CONNECTION CABLE - "A" FLANGE VIBRATION PICK-UP | 1 | |
| 8218-5202 | CONNECTION CABLE - "P" FLANGE VIBRATION PICK-UP | 1 | |
| 852516R16B26SN | INTERCONNECTION | 1 | |
| 852516R18B8SN | INTERCONNECTION | 1 | |
| 856A1471G02 | CFM56-5B ENGINE TURBINE FRAME CONNECTION BRACKET | 15 | |
| 856A1616 | CABLE ASSEMBLY - ECU/PDL INTERCONNECTION, FADEC II | 1 | |
| 856A1616 (G02) | CABLE ASSEMBLY - ECU/PDL INTERCONNECTION, FADEC II | 17 | |
| 856A1616G02 | CABLE ASSEMBLY - ECU/PDL INTERCONNECTION, FADEC II | 17 | |
| 856A1700 | CABLE ASSEMBLY - PDL INTERCONNECTION | 1 | |
| 856A1700G05 | CABLE ASSEMBLY - PDL INTERCONNECTION | 7 | |
| 856A3267G02 | ADAPTER-OIL SUMP AIR CONNECTION | 10 | |
| 8816389000 | BLANK,WATER WASH CONNECTION | 1 | |
| 8819795000 | CONNECTION | 3 | |
| 8900-6641 | ENGINE CONNECTION KIT TO AVM FOR B767 WITH PW4000 AND GE CF6-80C | 1 | |
| 8900-6942 | MD-11 AVM CONNECTION SET, CONSISTS OF | 1 | |
| 8990382 | REGULATOR - PRESSURE, 0 TO 250 PSI WITH PRESSURE GAUGE, 3/8 INCH ID CONNECTIONS | 1 | |
| 90-TP-4-3-38 | Bowers Profile Gage API numbered connections | 1 | |
| 90-TP-6-1.5-55 | Bowers Profile Gage API Numbered Connections | 1 | |
| 9230585 | 16 PIN LEMO TO MICRODOT CABLES FOR PROBES WITH MICRODOT CONNECTION | 1 | |
| 9230845 | 16 PIN LEMO TO MICRODOT CABLES FOR PROBES WITH MICRODOT CONNECTION | 1 | |
| 9240SI-1 | CONNECTION LEAD FOR P/N: 9240SI | 1 | |
| 926-1127-05 | 112VM HARDNESS FOR FTE CONNECTION | 1 | |
| 926-1127-06 | 114VM HARDNESS FOR FTE CONNECTION | 1 | |
| 926-1127-09 | 133VM HARDNESS FOR FTE CONNECTION | 1 | |
| 926-1127-10 | 134VM HARDNESS FOR FTE CONNECTION | 1 | |
| 926-1127-14 | 404VM HARNESS FOR FTE CONNECTION | 1 | |
| 9314204 | ANALOG POSITIVE PRESS GAUGE BACK ENTRY 600BAR,CONNECTION SIZE G 1/4 | 1 | |
| 9481M68G02 | ELECTRICAL WIRING WITH CONNECTION PIECE | 2 | |
| 968RB | ADAPTER, VALVE CONNECTION | 13 | |
| 972MC04C0001 | SRPS WIRING CONNECTION | 1 | |
| 9776080334 | SWIVEL CONNECTION | 1 | |
| 98821305001000 | EXT STATIC PORT CONNECTION | 1 | |
| 98A12003009000 | ADAPTER - GROUND CONNECTION | 1 | |
| 98A27508005204 | FORKED CONNECTION | 1 | |
| 98A55208012003 | FORK CONNECTION | 1 | |
| 98D27207508227 | BOLT, CONNECTION | 1 | |
| 98L29003008000 | CONNECTION PURIFICATUR CONNECTOR HUDR PURIFI | 2 | |
| 98L36103002100 | SUBSET BOTTLE CONNECTION | 1 | |
| 98S2130500100 | EXT STATIC PORT CONNECTION | 1 | |
| 98S21305001000 | EXT STATIC PORT CONNECTION | 4 | |
| 98S24005000000 | AIRCRAFT CONNECTION KIT | 5 | |
| 98S53805002-000 | ATR REFERENCE STANDARD 53-61-18 PT 6 FIGURE 603 PAGE 609. INSPECTION OF REAR PRESSURE BULKHEAD PERIPHERY OF DOME SKIN AND CONNECTION WITH VERTICAL FLANGE OF DOME VERTICLAL CHORD. Includes Test Report traceable to NIST and Certificate of Conformance. | 6 | |
| 999009 | "ELECTRICAL TEST HARNESS WITH 3-PHASE POWER CONNECTION, 3-PHASE POWER CONNECTION, GROUND (115 VAC, 3-PHASE, 400 HZ, LESS THAN 15 AMPS POER PHASE) | 1 | |
| A115-930-100 | PROBE 5 MHZ PHASED ARRAY, 6.4 MM (0.250 IN) ELEVATION, 64 ELEMENTS, 0.8 MM (0.031 IN) ELEMENT PITCH, 3 M (9.8 FT) CONNECTION CABLE. | 1 | |
| A20007-1 | TEST TOOL - STRIPPING FORCE, WRAPPED WIRE CONNECTION | 1 | |
| A21010-146 | Qd Air Connection | 1 | |
| A26001-219 | Connection RCPT | 1 | |
| A300-27-00-00-0214 | TOOL-FLAP TAB CONNECTION | 1 | |
| A330-92330-0103 | CONNECTION CABLE | 1 | |
| A38012-82 | Connection Sleeve | 1 | |
| AB 30651.00 | ONE HANDED GREASE GUN, 400/500CCM, WITH PISTON, 1/8 BSP CONNECTIONS, RIGID ANGLED TUBE CONNECTOR 180 | 1 | |
| ABNC-MD3 | CABLE - BNC TO Microdot connection 3.0' feet long. | 1 | |
| ABNC-MD4.5 | CABLE - BNC TO Microdot connection 4.5' feet long. | 1 | |
| AC 20-1005P-02L-600# | commercial pressure gauge, 2.5in dial, black ABS case, bronze tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| AC 25-1001TH-01B-XUC-160# | panel pressure gauge, 2.5in dial, steel case, bronze tube, 1/8in NPT back connection, U clamp, 0-160PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-1000# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in lower connection, calibration cert, Plus! option, 0-1000PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-30# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-30PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-300# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-300PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-60# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-60PSI range | 1 | |
| AC 25-1009SW-02L-X6BC4LL-4000#/BR | 2.5in dial, 304SS case, 316SS Bourdon tube & socket, 1/4in MNPT lower connection, cleaned for gaseous oxygen, calibration cert, Plus! performance option, 0-4,000PSI/Bar range" | 1 | |
| AC 25-1009SW-02L-XC4LL-100# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-100PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-10000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-10,000PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-3000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 30-1084S-02L-XC4-100# | test pressure gauge, 3in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, 0-100PSI range | 1 | |
| AC 30-1084S-02L-XC4-60# | test pressure gauge, 3in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, 0-60PSI range | 1 | |
| AC 30-2086SD-02L-XNNB2-5000# | Ashcroft Digital Test Gauge 1.0 3in dial, 0.1% F.S. TEB, SS case, 5 digit LCD display, battery powered, 1/4in MNPT lower connection, paper tag, orange rubber boot, 0-5000PSI range" | 1 | |
| AC 35-1009SW-02B-XC4LL-5000# | pressure gauge, 3.5in dial, SS case, 316SS tube, 1/4in NPT lower back connection, calibration cert, Plus! option, 0-5,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-10000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-3000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-4000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-5000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 45-1279SS-04L-XLL-5000# | 4.5IN Phenol Case316SS 1.0 Tube & Socket, 1/2in NPT Lower Connection, Plus! Performance Option, 0-5000PSI Range, Upc: 723259263407 | 1 | |
| AC 50-1008S-02L-600# | pressure gauge, 50mm (2in) dial, SS case, 316SS tube, 1/4in NPT lower connection, 0-600PSI range | 1 | |
| AC 63-1008A-02L-30# | pressure gauge, 63mm dial, SS case, bronze tube, 1/4in NPT lower connection, 0-30PSI range | 1 | |
| AC-JUMP-M100 | AC-JUMP-M100;Hardened interconnection jumper SMF FC/APC | 1 | |
| AC-JUMP-M101 | AC-JUMP-M101;Hardened interconnection jumper OM3 FC/PC | 1 | |
| ACP2D-7LOB-B | CABLE- 12 PIN MALE TO 7 PIN LEMO 0B SIZE. BRIDGE CONNECTION, 6.0' FEET LONG | 1 | |
| ACP2D-7LOB-R | CABLE- 12 PIN MALE LEMO TO 7 PIN LEMO 0B SIZE.REFLECTION CONNECTION, 6.0' FEET LONG Includes Certificate of Conformance. | 1 | |
| AE99119G | CONNECTION- PRESSURE TEST | 4 | |
| AE99148E | CONNECTION - FILL | 6 | |
| AE99148J | CONNECTION- RETURN TEST | 2 | |
| AGE-00639-401 | CMC/PC INTERCONNECTION CABLE | 5 | |
| AGE-01180-401 | INTERCONNECTION CABLE | 2 | |
| AGE-01858-401 | HARNESS - INTERCONNECTION (LAN) | 1 | |
| AGE-01858-403 | HARNESS - INTERCONNECTION, LAN | 5 | |
| AGE-01868-401 | ROD, CONNECTION-OBOGS HOSE | 1 | |
| AGE-04268-401 | HARNESS - INTERCONNECTION (LAN) | 2 | |
| AGE‐01858‐403 | Harness-Interconnection(Lan) | 5 | |
| ALT45200001 | PDL-ARINC615/615A WITH CABLE CONNECTION TO A/C MULTIPURPOSE DISK DRIVE UNIT (MDDU) | 1 | |
| AN16-L7-B | ADAPTOR - BRIDGE CONNECTION, 16 PIN MALE LEMO TO 7 PIN FEMALE. Includes Test Report and Certificate of Conformance | 1 | |
| AN16-P2D-B | ADAPTOR - BRIDGE CONNECTION, 16 PIN PLUG (NORTEC 500/600, 2000 SERIES INTRUMENTS TO 12 PIN LEMO RECEPTACTLE FOR GE/HOCKING INTRUMENTS Includes Certificate of Conformance | 1 | |
| AN816-3D | FITTING – ADT / CONNECTION FOR HOSE FITTING IN THE AIR DISTRIBUTION BOX OF THE ADT ASSEMBLY | 2 | |
| AND10089-3 | CONE CONNECTION PROTECTIVE STEEL CAP | 1 | |
| APHN6-4-14 | Fitting - Male Quick Disconnect Connection | 1 | |
| APN-5FX/200K-1MHZ | Flexible Surface Pencil Probe, absolute shielded, frequency: 200KHz-1MHz with the center frequency 500KHz. Measurement head diameter tubing 0.125"Ø inch (3.18mm). Total length: 5 inches (12.7cm). L00 cable connection. | 1 | |
| AT1603 | TEST CONNECTION | 1 | |
| AV2011 | HIGH PRESSURE CHARGING CONNECTION | 1 | |
| AWP05-64-08-050 | PROBE 5 MHZ PHASED ARRAY RAPID SCAN, 50 MM (1.969 IN) WHEEL PROBE, 64 ELEMENTS, 0.8 MM (0.031 IN) ELEMENT PITCH, 5 M (16.40 FT) CONNECTION CABLE. | 2 | |
| B50 | INDUSTRIAL NITROGEN BOTTLEAM: 22,9CM / CONNECTION CGA580/ PRESSION:3000PSI (207BARS)/SIZE 44 | 1 | |
| B500 | COMMERCIAL INDUSTRIAL NITROGEN BOTTLEAM: 22,9CM / CONNECTION CGA580/ PRESSION:3000PSI (207BARS)/SIZE 44 | 1 | |
| BACC45FT14-12P | ELECTRICAL CONNECTION | 1 | |
| BBJ1-210-230-013 | ROLLER ASSY BRACKET 1” (25MM) WIDE NYLON WEBBING, 0.5MM MAX THK, 4X 1000MM LENGTH (BUCKLES CONNECTION) | 1 | |
| C21006-1 | DEACTIVATION TOOL - CHECK VALVE - PNEUMANTIC GROUND CONNECTION | 13 | |
| C29006-1 | Adapter - Ground Service Connection, Hydraulic Power | 2 | |
| C29006-27 | Adapter Equipment- Ground Service Connection, Hydraulic Power | 7 | |
| CC-33-4 | CONNECTION CABLES W/CONNECTOR | 1 | |
| CN16-TF-6 | CONNECTION CABLE | 1 | |
| CRN16‐4F‐6 | CONNECTION CABLE (U8800538) 16‐PIN LEMO / 4‐PIN FISCHER CONNECTORS, 6 FT LONG | 1 | |
| CS-710-560 | CONNECTION HOSE | 1 | |
| CS-710-607 | INTERCONNECTION CABLE | 1 | |
| CS-710-608 | INTERCONNECTION CABLE | 1 | |
| CS-710-609 | (INTERCONNECTION | 1 | |
| CSO-00064-37 | ADAPTER, EXTERNAL HYDRAULIC POWER CONNECTION | 1 | |
| D46344 | INTERCONNECTION PLATE | 1 | |
| D46345 | INTERCONNECTION PLATE | 1 | |
| DC-700-P1 | CONNECTION CABLE | 1 | |
| DC-700-S1 | CONNECTION CABLE | 1 | |
| DC26F22-55S | CIRCLE CONNECTION PINS | 1 | |
| DCP-4 | DUCT CONNECTION | 1 | |
| DLT5302-013-01 | PIECE. 4 (DESIGNED METAL CONNECTIONS, INC. DBA PERMASWAGE | 1 | |
| DLTFRPSKT3027 | KIT HYDRAULIC REPAIR BY DESIGNED METAL CONNECTION | 9 | |
| DMC714A | DMC714A - Wiring System Service Kit for MIL-STD-1760 Electrical Interconnection Systems | 3 | |
| DPS450 | AIR DATA CONNECTION | 9 | |
| E1440 | DIAL GAGE 2.5" 0-160 PSI CENTRAL CONNECTION 1/4NPT | 1 | |
| E98OSXXOSX | E98OSXXOSX;Connection Kit to Cascade OSX8000 | 1 | |
| E9EOSXXOSX-LG1 | E9EOSXXOSX-LG1;LONG CONNECTION CABLE TO CASCADE OSX5000 | 1 | |
| EC225-725-PLUS-723 | AIR DATA SYSTEM CONNECTION ADAPTER | 1 | |
| EK-2-023 | CONNECTION CABLE TO CONNECT ROHMANN CONDUCTIVITY AND LAYER THICKNESS PROBES TO ELOTEST M2/M3/B300 | 1 | |
| EK-2-HF-1 | CABLE - CONNECTION OF ELOTEST | 3 | |
| EK-2-HF-2-LP | CABLE - CONNECTION OF ELEOTEST | 1 | |
| EK2HF | CABLE - CONNECTION OF ELEOTEST | 2 | |
| EMB-00053-001 | CONTROL-YOKE DISCONNECT DEVICE - RECONNECTION | 12 | |
| F26793000-1 | TESTER -SERVO VALVE WITH CONNECTION | 4 | |
| F532-R4117-000W6400-01 | EBV - CROSS BEAM CONNECTION C26-C26.1 / EBV - QUERTRÄGERANBINDUNG C26-C26.1 | 1 | |
| F611S28 | FUEL TANK VENT CONNECTION | 1 | |
| FLUGZEUGANSCHLUSS | AIRCRAFT CONNECTION CABLE 400 HZ | 1 | |
| G215-290014-1 | HYDRAULIC GROUND CONNECTION | 1 | |
| GA47340-240 | SET OF CONNECTIONS | 3 | |
| GA47340-260 | 5 CONNECTIONS MS-6/MS-6 (THREE UNION) | 3 | |
| GB458-021-097 | HOSE CONNECTION | 1 | |
| GCA580 | ADAPTOR US STANDARD CONNECTION | 1 | |
| GSE 134 | CMC/PC INTERCONNECTION CABLE | 1 | |
| H-2755 | HIGH PRESURE VALVE CONNECTION | 3 | |
| H-5265 | HIGH PRESSURE VALVE CONNECTION | 12 | |
| H-556 | HIGH PRESSURE VALVE CONNECTION | 3 | |
| H-6116B | HIGH PRESSURE VALVE CONNECTION | 2 | |
| H-T6-R | 1 CâBLE TRIAX FOR CONNECTION INSTRUMENT NORTEC 20 | 1 | |
| H2075-57-M5-V25 | FILL CONNECTION | 1 | |
| HB84-34-10-01 | CONNECTION TOOLS | 1 | |
| HLA7920 | ADAPTOR US STANDARD CONNECTION | 1 | |
| HLLH-556 | HIGH PRESSURE INFLATION CONNECTION 1/8 NPT (M) | 1 | |
| HOCKING 33A130 | CONNECTION CABLE FOR DIFFERENTIAL REFLECTION PROBES, HOCKING MODEL PHASEC 2200, LEMO 12W TO LEMO 4W CONNECTORS | 1 | |
| HOCKING-309P24 | CONNECTION CABLE, FOR HOCKING PHASE | 1 | |
| J21009-34 | GROUND START CONNECTION ASSEMBLY | 1 | |
| JB729 | COUPLING - GROUND CONNECTION | 2 | |
| JB729NG | COUPLING - GROUND CONNECTION | 1 | |
| JMPCFM56D4777C200-1 | FLUSH CONNECTION | 1 | |
| K27044-3 | Connection Assy | 1 | |
| K27044-4 | Connection Assy 2 | 1 | |
| K5429075 | INTERCONNECTION BOX | 1 | |
| KHC-3559 | CONNECTIONS FOR LOW AND HIGH PRESSURE HPU | 2 | |
| KHC2628 | HYDRAULIC CONNECTION KIT | 7 | |
| KU12705 | SPANNER - OPEN ENDED VARIOUS PIPE CONNECTIONS, .688 ACROSS FLATS | 2 | |
| KU37316 | SPANNER - OPEN ENDED VARIOUS PIPE CONNECTIONS, 1.000 ACROSS FLATS | 1 | |
| LANTAP-10 | LAN CONNECTION CABLE SET | 10 | |
| M15570-20 | TOOL - CONTACT INSTALLATION AND REMOVAL PREVIOUSLY MADE BY "DESIGNED METAL CONNECTIONS" | 13 | |
| M65723978 | ELECTRICA CONNECTION CABLE (NP) OPT TO M82000189-1002A | 1 | |
| M65724265 | TEST CONNECTION | 1 | |
| M7950-93S3 | TOOL HP GROUND CONNECTION | 5 | |
| M81969/14-02 | TOOL - CONTACT INSTALLATION AND REMOVAL PREVIOUSLY MADE BY "DESIGNED METAL CONNECTIONS" | 31 | |
| M81969/14/11 | TOOL - CONTACT INSTALLATION AND REMOVAL PREVIOUSLY MADE BY "DESIGNED METAL CONNECTIONS" | 30 | |
| M820000189-1004 | CONNECTION CABLE | 1 | |
| M820000189-2007 | CONNECTION CABLE | 1 | |
| M82000189-1002A | ELECTRICAL CONNECTION CABLE | 1 | |
| M82000189-1003A | CONNECTION CABLE | 1 | |
| M82000189-1006 | CONNECTION CABLE | 1 | |
| M82000189-1007 | CONNECTION CABLE | 1 | |
| M82000189-1008 | CONNECTION CABLE | 1 | |
| M82000189-1601A | CONNECTION CABLE | 1 | |
| M82000189-1604 | CONNECTION CABLE | 1 | |
| M82000189-1701 | CONNECTION CABLE | 1 | |
| M82000189-703 | CONNECTION CABLE | 1 | |
| M82000189-706 | CONNECTION CABLE | 1 | |
| M82000189-708 | CONNECTION CABLE | 1 | |
| M82000189-804 | CONNECTION CABLE | 1 | |
| M82000189-806 | CONNECTION CABLE | 1 | |
| M82000189-903A | Connection Cable | 1 | |
| M82000189-909 | CONNECTION CABLE | 1 | |
| M82000218-010 | TEST CONNECTION | 1 | |
| M82100021-010 | TEST CONNECTION | 1 | |
| M82100025-020 | TEST CONNECTION | 1 | |
| M8210020-030 | TEST CONNECTION | 1 | |
| MA275 | Connection junction module | 2 | |
| MBB502KR | CABLE - CONNECTION OF ELOTEST | 1 | |
| MBBN3408A1 | CABLE CONNECTION RED | 1 | |
| MLD-PG-150 | PRESSURE GAUGE 150PSI 3/8 NPT BACK CONNECTION | 1 | |
| MOSX-C1116XCCB0-M100-MFA | MOSX-C1116XCCB0-M100-MFA;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH FC/APC BULKHEAD | 1 | |
| MOSX-C1116XCCB0-M100-MFP | MOSX-C1116XCCB0-M100-MFP;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH FC/PC BULKHEAD | 1 | |
| MOSX-C1116XCCB0-M100-MLC | MOSX-C1116XCCB0-M100-MLC;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/PC BULKHEAD | 1 | |
| MOSX-C1116XCCB0-M100-MLU | MOSX-C1116XCCB0-M100-MLU;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/APC BULKHEAD | 1 | |
| MOSX-C1116XCCB0-M100-MSC | MOSX-C1116XCCB0-M100-MSC;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH SC/PC BULKHEAD | 1 | |
| MOSX-C1116XCCB0-M100-MSU | MOSX-C1116XCCB0-M100-MSU;16 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH SC/APC BULKHEAD | 1 | |
| MOSX-C1132XCCB0-M100-MLC | MOSX-C1132XCCB0-M100-MLC;32 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/PC BULKHEAD | 1 | |
| MOSX-C1132XCCB0-M100-MLU | MOSX-C1132XCCB0-M100-MLU;32 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/APC BULKHEAD | 1 | |
| MOSX-C1148XCCB0-M100-MLC | MOSX-C1148XCCB0-M100-MLC;48 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/PC BULKHEAD | 1 | |
| MOSX-C1148XCCB0-M100-MLU | MOSX-C1148XCCB0-M100-MLU;48 PORT COMMON CONNECTION SMF OPTICAL MATRIX SWITCH LC/APC BULKHEAD | 1 | |
| MP-30 | HIGH FREQUENCY PROBE MICRO DOT PROBE CONNECTION AND 12 PIN LEMO 12 PIN 0R BNC MENTOR EM INSTRUMENT CONNECTOR | 1 | |
| MS21916V12-4P | UNION ASSY FOR PNEUMATIC CONNECTION 11/4 ( AIRCRAFT END SIZE) TO 9/16 (BOTTLE END SIZE) | 1 | |
| MS22058-1 | Military Standard MS22058-1 Adapter, Compressed Gas Cylinder Valve Connections | 2 | |
| MS25488-27 | AIRCRAFT CONNECTION PLUG 28 VDC | 1 | |
| MS90328-26M | AIRCRAFT CONNECTION CABLE 115VAC 30FT | 1 | |
| MSUP-300A-PCTREMDB | MSUP-300A-PCTREMDB;MAP-Series PCT remote centralized database connection key | 1 | |
| MSUP-PCTREMDB | MSUP-PCTREMDB;PCT Remote Database Connection Key | 1 | |
| N16-T6 | 2 CâBLES TRIAX FOR CONNECTION INSTRUMENT NORTEC 2 | 1 | |
| N9860039117 | CONNECTION TOOL PITOT-STATIC | 1 | |
| NAEF4 | CONNECTOR; PNEUMATIC; CONNECTION FOR HOSE FITTING IN THE AIR DISTRIBUTION BOX OF THE DOAR DATA TEST EQUIPMENT SET; ALUMINUM | CONNECTION | 1 | |
| NAS1763D101008 | TEE FLARELESS ALUMINIO - CONNECTION | 1 | |
| NC-5625-18-FB | NOZZLE CONNECTION / WASHER ADAPTER | 1 | |
| NSA855011-12D | UNION - STRAIGHT, BULKHEAD CONNECTION | 1 | |
| NSA855011-12E | UNION - STRAIGHT, BULKHEAD CONNECTION | 1 | |
| O2N2FP0099 | GAUGE GLYCERINE FILL TYPE 233.54, SIZE: 2½”, WETTED PARTS: 316 SS, CONNECTION: LOWER AND BACK MOUNT, CONN. SIZE 1/4" NPT | 1 | |
| OS22970-020 | Pipe Connection | 1 | |
| P2D-T6 | 2 CâBLES TRIAX FOR CONNECTION INSTRUMENT PHASEC 3D | 1 | |
| P2D-T6-B | CABLE FOR PHASEC 2D AND 2200 EQUIPMENT - 6FT LENGHT - CONNECTION TRIAX | 1 | |
| P2D-T6-R | 2 CâBLES TRIAX FOR CONNECTION INSTRUMENT PHASEC 3D | 2 | |
| PD-60 | PROTECTIVE CAP FOR PNEUMATIC CONNECTIONS | 4 | |
| PE20209D12 | UNION - STRAIGHT, BULKHEAD CONNECTION | 1 | |
| PKA-27H1359 | PROBE - MUST HAVE A MICRODOT CONNECTION | 4 | |
| PKA27H1359 | PROBE - MUST HAVE A MICRODOT CONNECTION | 4 | |
| PROBE 90 | 50 KHZ TO 500 KHZ CONNECTION 1 MICRODOT | 1 | |
| PT45P1CQL02-D-T-FM-CM | PROCESS GAUGE, 4.5” DIAL, FRONT FLANGE, BLACK CASE, ACC. ±0.5 FS, 1/4" NPT FEMALE BACK CONNECTION, INTERNAL ZERO ADJUSTMENT, DUAL SCALE, -15 PSI TO 30 PSI/ 1000 KPA | 1 | |
| PWA105276 | CONNECTION TOOL. | 6 | |
| PWC37771 | WASH NOZZLE CONNECTION | 11 | |
| PWC40517 | DPHM CABLES PW306A USB CONNECTION | 4 | |
| PWC52A | ELECTRICAL CONNECTION PLIERS | 6 | |
| PWC64656 | ADAPTER (SERIAL CONNECTION), PRE-SB41068 | 3 | |
| PWC70548 | ELECTRICAL CABLE, FITTED WITH CONNECTION PART, WITH VOLTAGE LESS THAN 1000 V, FOR AIRCRAFT. | 4 | |
| PWC71445 | DPHM CABLES USB CONNECTIONS | 5 | |
| PWC71505 | CONVERTER/ADAPTER(USB CONNECTION) | 1 | |
| PWC71506 | CONVERTER/ADAPTER(USB CONNECTION) | 1 | |
| Q2501203 | CN16-TF-6-HD CONNECTION CABLE OLYMPUS | 1 | |
| R21850 | SET OF CONNECTIONS | 1 | |
| RDAM9215 | HEADSET OUTPUT CONNECTION CABLE | 1 | |
| RDAM9233 | HEADSET OUTPUT CONNECTION CABLE | 1 | |
| RDP1-2-6/50HZ-3KHZ TECHNA NDT | LOW FREQUENCY REFLECTION RING PROBE MICRO DOT PROBE CONNECTION AND LEMO 12PIN OR BNC MENTOR EM INSTRUMENT CONNECTION | 1 | |
| RDP1.25-74/50H | LOW FREQUENCY REFLECTION RING PROBE .MICRO DOT PROBE CONNECTION AND LEMO12 PIN OR BNC MENTOR EM INSTRUMENT CONNECTION | 1 | |
| RFK9800-13 | ADAPTER - PORT CONNECTION, RING LOCKED TO FLARED TUBE END, 4000 PSI WORKING PRESSURE SYSTEM | 1 | |
| RFK9812-13 | ADAPTER - PORT CONNECTION, RING LOCKED TO FLARED TUBE END, 4000 PSI WORKING PRESSURE SYSTEM | 1 | |
| RRO112-5/TF.50HZ-3KHZ OLYMPUS NDT | LOW FREQUENCY REFLECTION RING PROBE MICRO DOT PROBE CONNECTION AND LEMO 12PIN OR BNC MENTOR EM INSTRUMENT CONNECTION | 1 | |
| RRT033861 | ADAPTOR - TO ALLOW THE INHIBITING OF AN ENGINE .8085 - 16UNS THREADED CONNECTION | 3 | |
| RRT033866 | ADAPTOR - TO ALLOW THE INHIBITING OF AN ENGINE .750 - 16UNF THREADED CONNECTION | 4 | |
| RRT099814 | ADAPTOR - TO ALLOW THE INHIBITING OF AN ENGINE .8085 - 16UNS THREADED CONNECTION | 2 | |
| RRT099815 | ADAPTOR - TO ALLOW THE INHIBITING OF AN ENGINE .750 - 16UNF THREADED CONNECTION | 1 | |
| RT801103 | TOOL HP GROUND CONNECTION | 2 | |
| S3S21252000 | CCOC OIL_AIR CONNECTION COVER | 1 | |
| SBE 2018 | TEST CONNECTION | 1 | |
| SBE 2031 | TEST CONNECTION | 1 | |
| SBE 2032 | TEST CONNECTION | 1 | |
| SBE1682 | PNEUMATIC CONNECTION UNIT | 1 | |
| SBE2018 | TEST CONNECTION | 1 | |
| SBE2031 | TEST CONNECTION | 1 | |
| SBE2032 | TEST CONNECTION | 1 | |
| SCA-150-7170 | HAND PUMP TO REFURBISH PHOSPHATE ESTER W. AN4 FEMALE CONNECTION | 1 | |
| SCALP10M | DIN 477 NO.10 (DE) LP N2 REGULATOR WITH 5M 1 LP HOSE AND QUICK COUPLING. SCALP10M - LOW PRESSURE O2 AND N2 REGULATOR KIT WITH DIN 477 NO. 10 (DE) BOTTLE CONNECTION | 1 | |
| SK63-20941 | ELECTRICAL CONNECTION ADAPTOR | 1 | |
| SPC-258 | RING PROBE CONNECTION CABLE | 1 | |
| SPECTROLNF-Q210 | INCLUDING LNF Q210 OPTICAL PARTICAL, SOFTWARE, USER MANUAL CONNECTION CABLES AND POWER CORD, REQUIRES SA1015 STANDARD ACCESSORY KITS | 1 | |
| SPO‐6687 | CONNECTION CABLE (U8800538) 16‐PIN LEMO / 4‐PIN FISCHER CONNECTORS, 6 FT LONG | 2 | |
| ST2584C | PLIER-TEMP CONNECTION | 8 | |
| STD-1197 | VALVE - SHUTOFF, 3/8 INCH ID CONNECTIONS | 1 | |
| STD-1454 | REGULATOR - PRESSURE, 0-250 PSI WITH PRESSURE GAUGE, 3/8 INCH ID CONNECTIONS | 1 | |
| STD1197 | VALVE - SHUTOFF, 3/8 INCH ID CONNECTIONS | 1 | |
| T-125 PLUS | 6 VOLT BATTERY ELPT / EHPT CONNECTION | 1 | |
| T1203-04 | INTERCONNECTION UNIT | 1 | |
| TA-916-N | FILLING CONNECTION | 1 | |
| TEK-2018-12-5 | TEK-2018 series probe, regular surface probe tip, connection for extension rod, 90 degree, .250" drop, 12" length, 500K-1MHZ | 1 | |
| TEK-2018-13 | TEK-2018 series probe, regular surface probe tip, connection for extension rod, 90 degree, .250" drop, 13" length, 500K-1MHZ | 1 | |
| TF50B57301 | WING CONNECTION TOOL | 1 | |
| TM1609G001 | SHIELDED CONNECTION HARNESS | 5 | |
| TM5697G301 | DRAIN CONNECTION | 1 | |
| TMHDI43-12-00 | 120° SWIVEL CONNECTION (NITROGEN) | 2 | |
| TPEN9120-6B | HIGH FREQUENCY SHIELDED PENCIL PROBE MICRO DOT PROBE CONNECTION AND 12LEMO PIN OR BNC MENTOR EM INSTRUMENT CONNECTION 90 AND 45 DEGREE 3.2 MM DIAMETER | 1 | |
| TRI-HD-302R-G | 3 IN ROUND BOILER GAUGE WITH 1/2 IN MNPT CENTER BACK CONNECTION, 0 TO 200 PSI | 1 | |
| TRI-VP-RPM-DEV-LIC | TRI-VP-RPM-DEV-LIC;Viewpoint One-Time Connection Fee for RPM Module - One -1- Unit | 1 | |
| TRI-VP-WFM-DEV-LIC | TRI-VP-WFM-DEV-LIC;Viewpoint One-Time Connection Fee for WFM Module - One -1- Unit | 1 | |
| TS116R-3 | U-CONNECTION | 1 | |
| TS116R-5 | U-CONNECTION | 1 | |
| TT-TB4000-NTWRKCONS-SP | TT-TB4000-NTWRKCONS-SP;Self-Paced - TB4000 Network Connections Overview - 15 minutes | 1 | |
| U21859 | SET OF CONNECTIONS | 2 | |
| UA7119000000000 | CONNECTION BLOCK | 1 | |
| UT865 | ADAPTOR - INHIBITING, CONNECTION ON TO THE ENGINE FROM INHIBITING RIG | 7 | |
| UT984 | ADAPTOR - INHIBITING, CONNECTION ON TO THE ENGINE FROM INHIBITING RIG | 7 | |
| V0031J12-119 | POTABLE WATER FILL CONNECTION | 1 | |
| V24 | SPLITTE-HOSE CONNECTION | 2 | |
| WP2-CABLE-102 | PROBE 5 MHZ PHASED ARRAY, 6.4 MM (0.250 IN) ELEVATION, 64 ELEMENTS, 0.8 MM (0.031 IN) ELEMENT PITCH, 3 M (9.8 FT) CONNECTION CABLE. | 1 | |
| X004-14X | MULTIPLE CONNECTION MANIFOLD ASSEMBLIES | 1 | |
| X280P5201101 | CONNECTION KIT | 1 | |
| XAAB-0077 | ELECTR. CONNECTION | 1 | |
| XXX2 | PORTABLE NITROGEN BLOWING EQUIPMENT WITH TROLLEY ( MATCH BOC FOR FITTINGS) -BOC INTERNATIONAL NITROGEN REGULATOR -7.5KG -13KG OUTLET CONNECTION: AS 2473.2; TYPE 50 | 1 | |
| YHLZ16-2 | CONNECTION BLOCK | 2 | |
| Z0108484 | ELECTRICAL CONNECTION BOX | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
