| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 47A010 | CONDUCTIVITY STANDARD | 1 | |
| 9522103 | CONDUCTIVITY STANDARD | 1 | |
| CREF3-172959 | CONDUCTIVITY STANDARD | 1 | |
| CREF3-294259 | CONDUCTIVITY STANDARD | 1 | |
| CREF5-01293242100 | CONDUCTIVITY STANDARD | 1 | |
| CREF5-04174559100 | CONDUCTIVITY STANDARD | 1 | |
| U8861924 | CONDUCTIVITY STANDARD | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) CREF5-04174559100 | CONDUCTIVITY REFERENCE STANDARD (CALIBRATION) | 1 | |
| 47A010 | CONDUCTIVITY REFERENCE STANDARD | 1 | |
| 47A023 | STANDARD-CONDUCTIVITY | 1 | |
| 58.27 MS/M,43G MS/M | CONDUCTIVITY CALIBRATION STANDARD | 1 | |
| 600-374 | CONDUCTIVITY REFERENCE STANDARD | 1 | |
| 600-375 | CONDUCTIVITY REFERENCE STANDARD | 1 | |
| 605-522 | CONDUCTIVITY STANDARD 43 IACS | 1 | |
| 9080317 | CONDUCTIVITY STANDARD 11 MS/M (18 IACS) | 1 | |
| 9080325 | CONDUCTIVITY STANDARD 16 MS/M (28 IACS) | 1 | |
| 9080341 | CONDUCTIVITY STANDARD 22 MS/M (38 IACS) | 1 | |
| 9080350 | CONDUCTIVITY STANDARD 30 MS/M (52 IACS) | 1 | |
| 9222305 | CALIBRATION STANDARD VM30889-C1A 480 KHZ CONDUCTIVITY PROBE | 1 | |
| 9522103 | CONDUCTIVITY STANDARD BLOCK | 1 | |
| 9522321 | CONDUCTIVITY STANDARD SET | 1 | |
| 99F53107330000 | Airbus A318/A319/A320/A321 Conductivity Standard Block Set SB A320 57-1190 Figure 3. Material: 2024-T3 and 2024-T0 Aluminum. .047", 063" and .080" thickness in each Aluminum Temper Painted with Primer. Includes Test Report and Certificate of Conformance. | 2 | |
| AFNDT-2008/F | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2014-T6 CONDUCTIVITY RANGE 35-40 IACS.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-7003TI | 12 HOLE REFERENCE STANDARD. MATERIAL: 6AL-4V Titanium.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .005" WIDE +/-.001" THROUGH EDM NOTCH IN EACH HOLE. Includes Test Report, Conductivity and Certi... | 1 | |
| AL028-712-1197 | STANDARD-CONDUCTIVITY | 1 | |
| AL034-712-1198 | STANDARD-CONDUCTIVITY | 1 | |
| AL043-712-1220 | STANDARD-CONDUCTIVITY | 1 | |
| AL29-32 | CALIBRATION REFERENCE STANDARD, BLOCK, 2024-T3 ALUMINUM ALLOY, CONDUCTIVITY BETWEEN 29% AND 32% IACS, CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP SURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR EQUIVALENT) | 6 | |
| AL35-45 | CALIBRATION REFERENCE STANDARD (CRS), BLOCK, ALUMINUM ALLOY, WITH CONDUCTIVITY BETWEEN 35% AND 45% IACS (20.3 MS/M TO 26.1 MS/M), THAT CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, ( | 8 | |
| APB-NDT001 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 6 Frigure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes | 1 | |
| APB-NDT003 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 9-10 Figure 5. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | 1 | |
| APB-NDT004 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-01 Page 5-6 Figure 2. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Include | 1 | |
| APB-NDT005 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-02 Page 13-14. Figure 7. Material: 7150-T6 (34-39.5% IACS), 7050-T7 (40-44% IACS), and 2324-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Inclu | 1 | |
| APB-NDT006 | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-53 Page 5-6 Figure 2. Material: 7075-T7 (40-44% IACS), 2324-T3 (29.5-33.5% IACS), and 2224-T3 (29.5-33.5% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Inclu | 2 | |
| APB-NDT011A | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 8-9 Figure 3. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011B | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 11-12 Figure 5. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011C | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 14-15 Figure 7. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT011D | AVIATION PARTNERS BOEING REFERENCE STANDARD 767 Part 6 57-20-08 Page 17-18 Figure 9. Material: 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT015 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-20-09 Page 21-22 Figure 10. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 1 | |
| APB-NDT016 | BOEING AVIATION PARTNERS REFERENCE STANDARD 767 Part 6 57-50-09 Page 24-25. Figure 12 Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Ce | 1 | |
| APB-NDT3301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 737 Part 6 57-20-34 Page 7-8 Figure 2. Material: 2024-T3 (28.5-32% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5203 | AVIATION PARTNERS REFERENCE STANDARD 737 Part 6 57-20-02 Page 7-8 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate | 2 | |
| APB-NDT5204 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 11-12 Figure 4. Material: 2224-T3 and 2324-T3 or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 2 | |
| APB-NDT5205 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-02 Page 15-16 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5206 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 8-9 Figure 2. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certi | 2 | |
| APB-NDT5207 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 12-13 Figure 4. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5208 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-03 Page 16-17 Figure 6. Material: 2224-T3 (29.5-33.5% IACS) and 2324-T3 (29.5-33.5% IACS), or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Cer | 2 | |
| APB-NDT5301 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 15-16 Figure 6. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5302 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 11-12 Figure 4. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| APB-NDT5303 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 6 57-20-01 Page 7-8 Figure 2. Material: 7050-T7 (40-44% IACS) or Airplane Quality Material with an Electrical Conductivity Between ±5%. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBC-ALU5083 | STANDARD-CONDUCTIVITY AL5083 | 2 | |
| ATBC-ALU6061 | STANDARD-CONDUCTIVITY AL6061-T4 | 2 | |
| ATBC-PBRONZE | STANDARD-CONDUCTIVITY, PHOSPHOR BRONZE | 2 | |
| BH7475-T7351 | CALIBRATION REFERENCE STANDARD, ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35% TO 45% IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR EQUIVALENT) | 4 | |
| CM-ET-S-AL2014A-T6 | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CM-ET-S-AL5083 | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CM-ET-S-AL6082-T6 | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CM-ET-S-BRS | CONDUCTIVITY STANDARD ALLUMINIUM | 1 | |
| CREF3-172942 | CONDUCTIVITY STANDARD, MFG: OLYMPUS | 1 | |
| CREF3-172959 | CONDUCTIVITY STANDARD 17.2 - 29.3 - 59.9 | 1 | |
| CREF3-294259 | CONDUCTIVITY STANDARD 43 IACS | 1 | |
| CREF4-17294259 | ALUMINIUM CONDUCTIVITY STANDARD | 1 | |
| CREF4-173259100 | CONDUCTIVITY STANDARDS | 1 | |
| CREF5- 04174559100 | CERTIFIED CONDUCTIVITY REFERENCE STANDARD SET OF 5. INCLUDES VALUES OF 4.6% IACS ( /- 0.6%), 17.2% IACS ( /- 1.5%), 45.7% IACS ( /- 4%), 59.9% IACS ( /- 6%) AND 100% IACS ( /- 10%). SET INCLUDES PLASTIC HOLDER. | 1 | |
| CREF5-01293242100 | CONDUCTIVITY STANDARD SET | 1 | |
| FAS5060 | CONDUCTIVITY STANDARD 9.563 | 1 | |
| FAS5061 | CONDUCTIVITY STANDARD 29.65 | 1 | |
| FAS5062 | CONDUCTIVITY STANDARD 32.25 | 1 | |
| FAS5063 | CONDUCTIVITY STANDARD 59.69 | 1 | |
| FAS5064 | CONDUCTIVITY STANDARD 100.15 | 1 | |
| NDT3202-A | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-B | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-C | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-D | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-E | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3202-F | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3202-G | BOEING REFERENCE STANDARD 737 Part 6 55-10-53 Page 9 Figure 2. Material: 2024-T3 or Equivalent with a Conductivity of 28-32 IACS. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4243 | BOEING REFERENCE STANDARD 747 Part 6 57-10-31 Page 4 Figure 1. Material: 2024-T3 or An Airplane Quality with an Electrical Conductivity of 28-43% IACS. Fasteners: Non-Magetic Fastener. Includes Test Report and Certificate of Conformance. | 1 | |
| PB017-712-1231 | STANDARD-CONDUCTIVITY | 1 | |
| RH-4.7MM-C40-7075-T7 | Hole Standard,4.7mmØ, 2 plate stack, 7mm thick (each plate), 14mm total thickness, 50mm long, .040"(1mmx1mm) corner notch, 7075T7, conductivity 42%IACS +or- 3% | 1 | |
| RH12-T40-7075T6 | CALIBRATION REFERENCE STANDARD (CRS), ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35 TO 45 IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (TECHNA NDTEQUIVALENT) | 1 | |
| RM200-T40-T6AL4V | CALIBRATION REFERENCE STANDARD, TITANIUM ALLOY, CONDUCTIVITY 1.1 % IACS, CONTAINS 0.010 IN. (0.25 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP SURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, AND VARIOUS SIZE HOLES WITH 0.040-IN (1.02 MM) EDM NOTC | 1 | |
| U8861629 | ALUMINIUM CONDUCTIVITY STANDARD | 1 | |
| U8861902 | CONDUCTIVITY STANDARD SET | 1 | |
| U8861929 | CONDUCTIVITY STANDARD CREF5-04174559100 | 1 | |
| U8880111 | CONDUCTIVITY STANDARD BLOCK | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
