| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| BXP7000-548 | CONDA | 1 | |
| BXP7000-549 | CONDA | 1 | |
| BXP7000-550 | CONDA | 1 | |
| BXP7000-552 | CONDA | 1 | |
| BXP7000-553 | CONDA | 1 | |
| BXP7000-555 | CONDA | 1 | |
| BXP7000-564 | CONDA | 1 | |
| BXP7000-565 | CONDA | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98F54503005000 | TOOL TOOL R I-AFT SECONDARY STRUCTUR (CALIBRATION) (CALIBRATION) | 1 | |
| 0009-0148GSE2-1 | TOOL, RMV/INSTL, SECONDARY PIN - HORIZONTAL STABILIZER | 1 | |
| 0U145409 | CHECK THE INTEGRITY OF THE THS ACTUATOR BALL SCREW SHAFT (PRIMARY AND SECONDARY LOAD PATH) | 18 | |
| 1-899-15 | SECONDARY STANDARD SENSOR | 1 | |
| 100000-02 | SECONDARY POWER TEST SET | 1 | |
| 1020927-1 | SECONDARY ACTUATOR ASSY-HPC STATOR | 1 | |
| 103698-01 | SECONDARY OUTFLOW VALVE | 1 | |
| 103772-9 | VALVE-SECONDARY OUTFLOW | 1 | |
| 11732 | DIE SET - SECONDARY | 6 | |
| 11734 | DIE SET SECONDARY | 8 | |
| 11737 | DIE SET SECONDARY | 6 | |
| 13-0076-1 | SECONDARY LOCK PISTON LENGTH SIZING TOOL | 1 | |
| 15-79SG012 | Condaire Siphon Spray Air Gun (Description: Siphon Spray Air Gun) (Add to cart: Add To Cart) | 1 | |
| 15-80LJ12 | Condaire Long John Air Gun (Face diameter: 12" (305 mm)) (Add to cart: Add To Cart) | 1 | |
| 15-80LJ6 | Condaire Long John Air Gun (Face diameter: 12" (305 mm)) (Add to cart: Add To Cart) (Face diameter: 6" (152 mm)) (Add to cart: Add To Cart) | 1 | |
| 1705836B | SECONDARY POWER DISTRIBUTION ASSY | 1 | |
| 184060-3-2 | LEFT SECONDARY HEAT EXCHANGER | 1 | |
| 1900D-315 | SECONDARY HORIZONTAL STABILIZER COVERS, WINTER USE (set of 2) | 1 | |
| 1900D-320 | SECONDARY HORIZONTAL STABILIZER COVERS, ALL YEAR USE (set of 2) | 1 | |
| 2000861 | D8-400 towbar head for Bombardier Dash 8-400 aircraft. Designed with radial & linear shear protection & secondary lock mechanism. Compatible towbar(s): TB3, TB125, Rx | 1 | |
| 2001338 | FAL2 towbar head with advanced secondary lock mechanism. For use on Falcon 50/900/2000 series aircraft. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer) *Please note this part number now supersedes the prior FAL2 PN: 000700. | 1 | |
| 2001358 | FAL7X towbar head for: Falcon 7X. Designed with w/radial & linear shear protection to protect nose gear. Includes secondary lock mechanism. Requires towbar(s): TB3 or TB125; TB2.5 may be used but requires -2R shank (can be changed at no charge for use w | 1 | |
| 2001415 | D8-300 towbar head for Bombardier Dash 8-100-200-300 aircraft w/radial & linear shear protection & secondary lock mechanism. Compatible towbar(s): TB3, TB125 | 1 | |
| 2002860 | FAL1 towbar head with advanced secondary lock mechanism for the Dassault Falcon 10/100 & 20/200 (a.k.a. Mystere) aircraft.Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w/Reducer) | 1 | |
| 2015535 | Secondary Fuel Lift Assembly for NB & WB Adjustable Fuel Stand (2017837) | 1 | |
| 289545-1 | SECONDARY FUEL NOZZLE SIMULATOR RESTRICTOR | 1 | |
| 296272-2 | SECONDARY FUEL NOZZLE SIMULATOR | 1 | |
| 351-1000-25GSE | FORWARD SECONDARY STRCUCTURE SLING | 1 | |
| 416200GSE2-1001 | TOOL RMV/INSTL, SECONDARY PIN - HORIZONTAL STABILIZER | 5 | |
| 47322 | DIE SET SECONDARY (FOR 69069)) | 3 | |
| 490700GSE1-1001 | HSTA SECONDARY PIN TOOL | 1 | |
| 513400GSE3 | SECONDARY & GIMBAL PIN | 1 | |
| 513400GSE8-1001 | HSTA SECONDARY LOAD PATH AND AXIAL BACKLASH KIT GSE2730172 | 1 | |
| 513400GSE8-1001:UNKNOWN | HSTA SECONDARY LOAD PATH AND AXIAL BACKL | 1 | |
| 5743K000 | SECONDARY FLOW DUCT SET | 1 | |
| 609A071003-00 | SECONDARY SAFETY BOLT | 1 | |
| 63813-9400 | Secondary Lock Removal Tool for 35 Circuit Hybrid Receptacle Housing | 1 | |
| 6877016 | PURGING AND HEAT SINK FIXTURE (FOR NOZZLES PROVIDES ARGON PURGE CONNECTION WITH WEAR SLEEVES) AND DISSIPATES HEAT DURING SECONDARY BODY WELDING PROCEDURE. | 1 | |
| 6877017 | PURGING AND HEAT SINK FIXTURE (FOR NOZZLES PROVIDES ARGON PURGE CONNECTION WITHOUT WEAR SLEEVES) AND DISSIPATES HEAT DURING SECONDARY BODY WELDING PROCEDURE. | 1 | |
| 6877021 | SEAL FIXTURE SECONDARY ORIFICE | 1 | |
| 6877023 | SECONDARY SUPPORT RING ADAPTER | 1 | |
| 6877024 | TACK WELD FIXTURE PRIMARY AND SECONDARY BODY | 1 | |
| 6897101 | TEST FIXTURE, INLET PLUG PROVIDES SEPARATE PRIMARY AND SECONDARY INLET FLUID CONNECTIONS DURING SUPPORT TESTING. | 1 | |
| 6897104 | SEAL FIXTURE, PRIMARY ORIFICE PLUGS PRIMARY ORIFICE DURING PAST WELD PRESSURE TEST, NO SECONDARY PRESENT. | 1 | |
| 6897142 | DEPTH GAGE DETERMINES SECONDARY BODY MACHINING DIMENSION. | 1 | |
| 6897143 | DEPTH GAGE DETERMINES SECONDARY BODY MACHINING DIMENSION. | 1 | |
| 4920015285517 | SECONDARY POWER TEST SET | 1 | |
| 8-1579007-2 | LOCKING TOOL; CLOSING SECONDARY LOCK | 1 | |
| 822-3292GSE2 | TOOL REM / INST.SECONDARY PIN HOR. STABI | 1 | |
| 822-3292GSE2-1 | TOOL, REM/INSTL, SECONDARY PIN - HORIZONTAL STABILIZER | 1 | |
| 83372 | 83372;390XOPT215 Secondary Control Channel Broadcast Message; Requires Opt201 | 1 | |
| 98AMS172327002 | TOOL SET-R I,THS OR WRENCH-ADAPTER - SECONDARY PINS | 13 | |
| 98D27407517000 | TOOL SET-R I,THS OR WRENCH-ADAPTER - SECONDARY PINS | 21 | |
| 98F54503005000 | TOOL R I-AFT SECONDARY STRUCTURE | 3 | |
| 98F54503005001 | TOOL,R I-AFT SECONDARY STRUCTURE | 1 | |
| 98F54503006000 | TROLLEY-AFT SECONDARY STRUCTURE | 1 | |
| 98L07104006000 | JACKING TOOL ASSEMBLY SECONDARY SPIGOT | 1 | |
| AGE15169 | HOT INLET/OUTLET CAP (SECONDARY HEAT EXCHANGER) CMM : 21-52-54 OEM : HAMILTON SUNDSTRAND | 1 | |
| AGR-110 | SECONDARY INTAKE PLUGS (UPPER) (set of 2) | 1 | |
| AM1710-12-ADT | 100 OHM SECONDARY PRT, -40C TO 160C | 1 | |
| AM1760-12-ADT | SECONDARY REF SPRT, -200C TO 670C | 1 | |
| APWR-110 | SECONDARY INTAKE PLUGS (UPPER) (set of 2) | 1 | |
| BE539-25 | CAP - PPRV SECONDARY CONTROLLER AND INTEGRAL SENSE | 1 | |
| BS3096G | SECONDARY GANTRY WITH 250 LB LIFT CAPACITY | 1 | |
| C32034-172 | SECONDARY MACHINED | 1 | |
| C32034-173 | SECONDARY WELDMENT | 1 | |
| C57004-1 | REMOVAL EQUIPMENT - SECONDARY TORQUE TUBE, INBOARD MAIN FLAP ASSEMBLY | 1 | |
| C574-1212 | AIR CLEANER SECONDARY | 1 | |
| CDI61-61 | SECONDARY ARM | 1 | |
| CDI6162 | SECONDARY ARM,61 SER DECA TUBE | 1 | |
| F80113-75 | Anvil Secondary | 1 | |
| F80113-76 | Anvil Secondary | 1 | |
| F80113-77 | Anvil Secondary | 1 | |
| FLUKE 1775 | ANALYSER, 3 PHASE, DIGITAL, PORTABLE, POWER QUALITY AND ENERGY ANALYZING, IEC 61000-4-30, RANGE 1 - 1000 V, 0.5, BEZEL 280 MM LG X 75 MM WD X 24 MM DP, MTG PORTABLE, IP 51, 0 TO 40 DEG C, SUPPLY BATTERY, RECHARGEABLE , LITHIUM-ION, 1-5 A CURRENT SECONDAR | 1 | |
| G601R783202-3 | LOCK ASSY, SECONDARY | 1 | |
| G700-246201-1 | Harness - Secondary Power Distribution Assembly | 1 | |
| GS23467-1 | SECONDARY QUILL SHIPPING FIXTURE | 1 | |
| GS23470-1 | INSTALLATION TOOL, SECONDARY QUILL | 1 | |
| H102021-7 | SECONDARY AIR INLET SEALING FIXTURE | 1 | |
| K21029-1 | ADAPTER - JACK, SECONDARY HEAT EXCHANGER | 4 | |
| K21029-19 | Adapter-jack，secondary heat exchanger | 4 | |
| LAPR-110 | SECONDARY INTAKE PLUGS (UPPER) (set of 2) | 1 | |
| MS20219-1 | PULLEY, GROOVE, SECONDARY CONTROL, AIRCRAFT | 8 | |
| PWA25780 | ADAPTER - SECONDARY FUEL MANIFOLD INLET_[PWA25780] | 1 | |
| PWC47133 | PW617F-E SECONDARY FUEL TUBE, MODIFIED | 1 | |
| PWC47188 | SECONDARY FUEL TUBE | 1 | |
| PWC47218 | SECONDARY FUEL TUBE | 1 | |
| PWC62293 | PULLER SECONDARY DUCT | 1 | |
| PWC64917 | SECONDARY FUEL ADAPTER | 2 | |
| PWC67842 | SECONDARY FORK | 2 | |
| RSE1097 | REWORK TOOL-SECONDARY RETENTION SYSTEM | 1 | |
| RSE1097 REV A | REWORK TOOL-SECONDARY RETENTION SYSTEM | 1 | |
| RSEI097 | REWORK TOOL-SECONDARY RETENTION SYSTEM | 1 | |
| STD67982 | Plug-Secondary Relief Valve | 1 | |
| STD67983 | Assembly Sleeve,Secondary Relief Valve | 1 | |
| T9-1750C | SECONDARY PIN | 1 | |
| UPT78-114 | WEDGES (PRIMARY BRAKE, SECONDARY LOCK) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
