| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 296400-1 | COMPRESSOR ASSEMBLY | 1 | |
| 90-555039-5 | COMPRESSOR ASSEMBLY | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 08-4014-4010 | Engine Compressor Washer - 2 Gallon (Beech) - Aircraft connector assembly, no wand | 5 | |
| 08-4040-401 | ENGINE COMPRESSOR WASHER, HAND CARRY, 2 1/2 GALLON - 22 IN (56 CM) WAND ASSEMBLY WITH ADJUSTABLE SPR | 1 | |
| 08-4040-4010 | Engine Compressor Washer, Hand Carry, 2 1/2 Gallon - 22 in (56 cm) wand assembly with adjustable spr | 7 | |
| 10C1022G01 | Adapter Set Assembly Pedestal-Compressor Rear Frame | 1 | |
| 10C1072G01 | FIXTURE, DISASSEMBLY - HPT ROTOR/COMPRESSOR ROTOR (DISASSEMBLY FIXTURE) (SUPERSEDED BY 10C1072G02) | 1 | |
| 10C1072G02 | FIXTURE, DISASSEMBLY - HPT ROTOR/COMPRESSOR ROTOR (DISASSEMBLY FIXTURE) (SUPERSEDES 10C1072G01) | 1 | |
| 10C1077G01 | FIXTURE, LIFT – COMPRESSOR STATOR CASE, FRONT ASSEMBLY (CF34) | 1 | |
| 10C1141G01 | Gage,locking lug-compressor rotor assembly | 1 | |
| 10C1240G01 | fixture disassembly hp turbine rotor hp compressor rotor | 1 | |
| 1C8333G01 | JACK ASSEMBLY, SUPPORT COMPRESSOR REAR FRAME | 1 | |
| 1C9376G01 | JACK ASSEMBLY, SUPPORT COMPRESSOR REAR FRAME | 1 | |
| 1C9447 | JACK ASSEMBLY, SUPPORT COMPRESSOR | 1 | |
| 2025261-1 | BEARING REMOVAL FIXTURE (REMOVES 3617585-001 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND 3822055-1 COUPLING SHAFT) | 1 | |
| 23033026 | NUT CLAMP COMPRESSOR ROTOR ASSEMBLY FIXTURE | 2 | |
| 23034304 | MASK--BALANCE CUT, COMPRESSOR ROTOR IMPELLER LIMITS STOCK REMOVAL TO THE ACCEPTABLE AREAS WHEN BALANCING THE COMPRESSOR ROTOR ASSEMBLY. | 1 | |
| 23037973 | MASK--BLASTING, COMPRESSOR THIRD-STAGE VANE ASSEMBLY | 1 | |
| 23037974 | MASK--BLASTING, COMPRESSOR FIRST-STAGE VANE ASSEMBLY | 1 | |
| 23037978 | FIXTURE BLAST, COMPRESSOR FOURTH-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037979 | MASK--BLAST, COMPRESSOR SECOND-STAGE VANE ASSEMBLY USE | 1 | |
| 23037980 | MASK--SPRAY, COMPRESSOR FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23037981 | MASK--BLAST, COMPRESSOR FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23037982 | FIXTURE--HOLDING, COMPRESSOR FIRST-, SECOND-, THIRD-, AND FOURTH-STAGE VANE ASSEMBLY | 1 | |
| 23037983 | FIXTURE--BLAST, COMPRESSOR FIRST-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037984 | FIXTURE--BLAST, COMPRESSOR SECOND-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23037985 | FIXTURE--BLAST, COMPRESSOR THIRD-STAGE VANE AND BAND ASSEMBLY | 1 | |
| 23053597 | Separator – Compressor Wheel, Stage 14 From Compressor Cone Assembly | 1 | |
| 23058450 | Roller Carriage Balance Compressor Rotor Assembly | 1 | |
| 23058454 | Fixture – Turntable, Compressor Case Assembly | 1 | |
| 23058459 | Master – Dim “A” Set, Compressor Case Assembly | 1 | |
| 23063510 | Fixture – Balance, Compressor Wheel Assembly | 1 | |
| 23068578 | Support – Compressor Rotor Assembly | 1 | |
| 23068585 | Support – Compressor Rotor Assembly, Forward Shaft | 1 | |
| 278-1T1 | COMPRESSOR ASSEMBLY SUPPORT | 1 | |
| 2840-00-337-4341 | ARM ASSEMBLY, COMPRESSOR STATOR LINKAGE | 1 | |
| 289358 | COMPRESSORASSEMBLY | 1 | |
| 28ME65B00713-1 | TURNBUCKLE ASSEMBLY - HIGH COMPRESSOR TURBINE SUPPORT ON-WING MAINTENANCE, JT9D ENGINE | 1 | |
| 291545-1 | HOLDER AND COMPRESSOR ASSEMBLY VALVE | 1 | |
| 294879-1 | BEARING MECHANICAL PULLER (REMOVES 3822071-1 COMPRESSOR BEARING FROM 3810127-1 BEARING HOUSING ASSEMBLY AND | 1 | |
| 294891-1 | DRIVEN COMPRESSOR HOLDER ADAPTER (TO FIT SHAFT OF 294886-1 ROTATING ASSEMBLY HOLDER THAT WILL LOCATE THE INSIDE DIAMETER OF 3822075-2 MAIN SHAFT) | 1 | |
| 294927-1 | DRIVEN COMPRESSOR HOISTING ADAPTER AND HOUSING REMOVAL (TO LIFT DRIVEN COMPRESSOR ASSEMBLY DURING MAINTENANCE OPERATIONS) | 1 | |
| 296903-1 | SPLINED HOLDER (TO ENGAGE SHAFT SPLINES DURING COMPRESSOR ASSEMBLY) | 1 | |
| 2C14651G01 | CHUCK COMPRESSOR ROTOR ASSEMBLY FIXTURE | 3 | |
| 2C14661G01 | FIXTURE, INSTALLATION/REMOVAL COMPRESSOR REAR FRAME ASSEMBLY | 2 | |
| 2C14661G02 | FIXTURE, REMOVAL COMPRESSOR EAR FRAME ASSEMBLY | 1 | |
| 2C18044G01 | ADAPTER SET ASSEMBLY, PEDESTAL - COMPRESSOR REAR FRAME (ADAPTER SET ASSEMBLY) | 1 | |
| 2C5247G01 | KIT, COMPRESSOR ROTOR SET SCREW ASSEMBLY | 1 | |
| 2C91160G01 | CRADLE, COMPRESSOR ROTOR ASSEMBLY BALANCE | 1 | |
| 2C91192G01 | FIXTURE-COMPRESSOR SUB ASSEMBLY | 1 | |
| 3425 | LIFT, COMPRESSOR ROTOR ASSEMBLY | 3 | |
| 3435 | SLING COMPRESSOR ROTOR ASSEMBLY | 3 | |
| 3602 | VALVE SPRING COMPRESSOR TOOL, ENGINE CYLINDER ASSEMBLY | 1 | |
| 3732 | HOLDER - COMPRESSOR EXTENSION SHAFT ASSEMBLY | 2 | |
| 390500AT16 | ASSEMBLY TOOL, SPRING COMPRESSOR | 1 | |
| 6795594 | FIXTURE ASSEMBLY COMPRESSOR ROTOR | 2 | |
| 6795966 | FIXTURE ASSEMBLY COMPRESSOR ROTOR | 3 | |
| 6796042−1 | GAGE - COMPRESSOR ROTOR TO VANE ASSEMBLY AXIAL CLEARANCE | 1 | |
| 6796042−3 | GAGE - COMPRESSOR ROTOR TO VANE ASSEMBLY AXIAL CLEARANCE | 3 | |
| 6796080-201 | SEPARATOR - COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6796080-202 | SEPARATOR - COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6796080−201 | SEPARATOR - COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6796080−202 | SEPARATOR - COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6796464 | ADAPTER, LIFTER COMPRESSOR ASSEMBLY | 2 | |
| 6797022 | PULLER - COMPRESSOR EXTENSION SHAFT BEARING HOUSING ASSEMBLY | 1 | |
| 6797044 | GAGE - COMPRESSOR ROTOR TO VANE ASSEMBLY AXIAL CLEARANCE | 1 | |
| 6797058−201 | SEPARATOR - COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6797058−202 | SEPARATOR - COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6798227 | FIXTURE, CHECKING, COMPRESSOR VANE ASSEMBLY | 1 | |
| 6798787 | FIXTURE-COMPRESSOR DISCHARGE AIR TUBE ASSEMBLY PRESSURE CHECK | 1 | |
| 6798927 | COMPRESSOR IMPELLER ASSEMBLY | 2 | |
| 6893360 | FIXTURE - ASSEMBLY, COMPRESSOR | 2 | |
| 6897884 | HEATER - AIR, COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 6897894 | CLAMP - ROUNDING, COMPRESSOR CASE ASSEMBLY | 2 | |
| 856A1021 | FIXTURE, LIFT AND TURN - COMPRESSOR ROTOR ASSEMBLY FORWARD END | 1 | |
| 856A1021G02 | FIXTURE, LIFT AND TURN COMPRESSOR ROTOR ASSEMBLY FORWARD END | 11 | |
| 856A1025G02 | LOCATOR, ENGINE COMPRESSOR ROTOR ASSEMBLY SEAL WIRE | 10 | |
| 856A1068 | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY | 1 | |
| 856A1068 (G02) | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY | 11 | |
| 856A1068G01 | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY (LOCKING LUG GAGE) | 1 | |
| 856A1068G02 | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY | 11 | |
| 856A1084P17 | COMPRESSOR FRONT STATOR ASSEMBLY | 1 | |
| 856A1421 | FIXTURE, LIFT - HP COMPRESSOR CASE FRONT STATOR ASSEMBLY (LIFT FIXTURE) | 1 | |
| 856A1421 G01 | FIXTURE, LIFT - HP COMPRESSOR STATOR CASE FRONT ASSEMBLY | 11 | |
| 856A1421G01 | FIXTURE, LIFT - HP COMPRESSOR STATOR CASE FRONT ASSEMBLY | 11 | |
| 856A1421G02 | FIXTURE, LIFT - HP COMPRESSOR STATOR CASE FRONT ASSEMBLY | 9 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1816G01 | COMPRESSOR FRONT STATOR ASSEMBLY UPPER FRONT COMPRESSOR CASE REMOVAL | 9 | |
| 856A1839 | FIXTURE, DISASSEMBLY - HPT/ HP COMPRESSOR ROTOR | 1 | |
| 856A1839G01 | FIXTURE, DISASSEMBLY - HIGH PRESSURE TURBINE ROTOR/HIGH PRESSURE COMPRESSOR ROTOR | 9 | |
| 856A2004 | TOOL, ASSEMBLY - INSTALL/REMOVE HPTR TO COMPRESSOR ROTOR NUTS | 1 | |
| 856A2004G01 | TOD, ASSEMBLY - LNSTALL/ RENIOVE HPTR TO COMPRESSOR ROTOR NUTS (ASSEMBLY TOOL) | 1 | |
| 856A2004G02 | Tool, Assembly - Install/Remove HPTR to Compressor Rotor Nuts (assembly tool) | 6 | |
| 8819-681-000 | SET OF WRENCHES FOR AXIAL COMPRESSOR ASSEMBLY | 2 | |
| 8819681000 | SET OF WRENCHES FOR AXIAL COMPRESSOR ASSEMBLY | 2 | |
| 8C2157 | GAGE, LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY | 1 | |
| 8C2189 | FIXTURE, SUPPORT - AFT COMPRESSOR INNER STATOR ASSEMBLY | 1 | |
| 905542-1-1 | PULLER COMPRESSOR INLET ASSEMBLY | 1 | |
| 956A1148 | GAGE - LOCKING LUG - COMPRESSOR ROTOR ASSEMBLY | 1 | |
| 956A1229 | FIXTURE - DISASSEMBLY - HPT ROTOR/HP COMPRESSOR ROTOR | 1 | |
| 956A1262G01 | Fixture, Disassembly - Hpt Rotor/Hp Compressor Rotor | 1 | |
| 956A3129 | FIXTURE - SUPPORT - DISASSEMBLY - HIGH PRESSURE COMPRESSOR ROTOR | 1 | |
| B78013-4 | SPRING COMPRESSOR ASSEMBLY | 2 | |
| C32016-10 | COMPRESSOR ASSEMBLY HALVES 2ea | 4 | |
| CPWA-30233 | Support, compressor rotor, assembly | 1 | |
| CPWA-30452 | Fixture – Aligning, Compressor Rotor Assembly | 1 | |
| F80065-1 | Spring Compressor Assembly - Flap Asymmetry Mechanism | 2 | |
| GS14550-1 | Spring Assembly Compressor | 2 | |
| J32075-8 | SPRING COMPRESSOR ASSEMBLY | 1 | |
| JMP/CF6/A/4087 | COMPRESSOR,TWIN HOSE ASSEMBLY | 1 | |
| K-1410 | Tronair K-1410 Replacement Compressor Washer Hose Assembly | 4 | |
| K-1411 | Tronair K-1411 Replacement Compressor Washer Wand Assembly | 5 | |
| LTCT 1390 | ADAPTER, COMPRESSOR ROTOR ASSEMBLY | 1 | |
| LTCT12071-01 | Cradle Assembly, Compressor Rotor Assembly | 1 | |
| LTCT13803 | Damping Ring, Compressor Rotor Assembly | 1 | |
| LTCT1390 | Adapter, Compressor Rotor Assembly | 1 | |
| LTCT14736-02 | Fixture Assembly, Compressor Rotor Checking | 1 | |
| LTCT1643 | Drift Assembly, Compressor Blades | 2 | |
| LTCT1644 | Drift Assembly, Compressor Blades | 2 | |
| LTCT2147 | WRENCH AND BASE ASSEMBLY(REAR COMPRESSOR SHAFT) | 1 | |
| LTCT7476-01 | Cradle Assembly, Compressor Rotor Assembly | 1 | |
| LTCT7660-01 | Tool Assembly, Compressor Blades Installation | 1 | |
| PWA 16178 | EYE COMPRESSOR DISK AND BLADE ASSEMBLY | 2 | |
| PWA 16360 | STAND FRONT COMPRESSOR VERTICAL ASSEMBLY | 1 | |
| PWA107918 | COMPRESSOR MECHANICAL - ENGINE ASSEMBLY, LPC FAN BLAD | 1 | |
| PWA51408 | COMPRESSOR,BUMPER ASSEMBLY | 1 | |
| PWC30420 | HOLDING FIXTURE, COMPRESSOR ROTOR ASSEMBLY | 1 | |
| PWC32455 | STAND, COMPRESSOR ASSEMBLY | 3 | |
| PWC52445 | WRENCH, ASSEMBLY, COMPRESSOR, INLET CONE | 1 | |
| PWC57694 | COMPRESSOR WASH NOZZLE ASSEMBLY | 7 | |
| PWC71740 | PULLER- COMPRESSOR ROTOR ASSEMBLY | 1 | |
| PWC71776 | HOLDING FIXTURE, COMPRESSOR ROTOR ASSEMBLY | 3 | |
| RB23033026 | Nut, Clamp, Compressor Rotor Assembly Fixture | 1 | |
| RB23055347 | Fixture-Inspection Frt. Compressor Support Assembly | 2 | |
| RB6795594 | Fixture-Assembly, Compressor Rotor | 2 | |
| RB6798927 | Compressor Impeller Assembly | 3 | |
| RB6893360 | Compressor Fixture Assembly | 2 | |
| RB6899940 | Bleed Air Manifold Assembly Compressor Shroud Puller | 1 | |
| RBT18717 | COMPRESSOR WRENCH ASSEMBLY | 3 | |
| RBT18717-03 | Compressor Wrench Weldment Assembly | 1 | |
| RRT050494 | LP COMPRESSOR CASE GROUP ASSEMBLY REMOVE PROCEDURE (VERTICAL BUILD METHOD) | 1 | |
| TB3013G002 | LOAD COMPRESSOR ASSEMBLY MEASUREMENT TOOL | 1 | |
| TB3020G302 | LOAD COMPRESSOR ASSEMBLY SLING | 1 | |
| TM6936G001 | ENGINE COMPRESSOR EROSION CHECK TEMPLATE ASSEMBLY D23 | 3 | |
| c32016-10 | compressor Assembly Half | 4 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
