| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| IPBCR-1027 | COMPOUND | 1 | |
| PWC05-184 | COMPOUND | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 005-1234-020 | SILICON HEAT SINK COMPOUND | 1 | |
| 05WCA1 | ADHESIVE PRIMER SILICON COMPOUND | 1 | |
| 10H09-60 | JET STARTER 60FT, SILICONE,RUBBER,COMPOUND | 2 | |
| 120-5 | SILICONE THERMAL JOINT COMPOUND 5O | 3 | |
| 1614 | EPOCAST (KIT) COMPOUND A B | 1 | |
| 2-1/2 | COMPOUND LEVERAGE ARBOR PRESSES MODEL 2-1/2 6 TON CAPACITY | 1 | |
| 221162 | INJECTION GUN, COMPOUND - POTTING CUP | 3 | |
| 229340 | COMPOUND MIXER | 4 | |
| 2609932-1 | CONTOUR GAGE COMPOUND RADIUS | 1 | |
| 30 HG-0-30 PSI | GAUGE, COMPOUND | 1 | |
| 61-74499-2005 | THREAD LOCK COMPOUND | 1 | |
| 6120501 | COUPLING COMPOUND TUBE 100ML 130C | 1 | |
| 93-076-2 | SEALING COMPOUND | 1 | |
| A00458 | COMPOUND-SILICONE, COLD CURING SPECIFICATION OMAT 872 | 1 | |
| A50TF201CLA | COMPOUND ANTI-SEIZE | 1 | |
| AB29101-Z30 | COUPLING COMPOUND TUBE 100ML 130C | 1 | |
| AFS-0517L | 5MHZ 45° SHEARWAVE WITH 34° COMPOUND ANGLE. SCANS TOWARDS THE LEFT. LOW PROFILE TRANSDUCER | 1 | |
| AFS-0517R | 5MHZ 45° SHEARWAVE WITH 34° COMPOUND ANGLE. SCANS TOWARDS THE RIGHT. LOW PROFILE TRANSDUCER | 1 | |
| AFS-0525 | 5 MHz COMPOUND SHEARWAVE TRANSDUCER USED FOR LEFT SIDE EDM BORE NOTCH ON NDT3242 | 1 | |
| AFS-0526 | 5 MHz COMPOUND ANGLE SHEARWAVE TRANSDUCER WITH A 2.275 INCH RADIUS. USED TO SCAN NEAR SIDE EDM NOTCH ON NDT3243 | 1 | |
| AFS-0576L | CUSTOM 25° "L" - WAVE TRANSDUCER WITH A 2° COMPOUND ANGLE (BACKSHOOTER) 5.0 MHz .25" x .25" ELEMENT WITH A 1.65" RADIUS, LEFT SIDE USED WITH NDT3272 Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0576R | CUSTOM 25° "L" - WAVE TRANSDUCER WITH A 2° COMPOUND ANGLE (BACKSHOOTER) 5.0 MHz .25" x .25" ELEMENT WITH A 1.65" RADIUS, RIGHT SIDE USED WITH NDT3272 Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1202L | CUSTOM 5MHz TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (LEFT) USED WITH NDT3021, 737 Part 4 57-50-01.Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1202R | CUSTOM 5MHz TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (RIGHT) USED WITH NDT3021, 737 Part 4 57-50-01. Includes Test Report and Certificate of Conformance. | 1 | |
| BDG1400 | 14IN COMPOUND JOINT PLIERS | 1 | |
| BDG1445 | 14IN COMPOUND JNT BENT NSE PLR | 1 | |
| BDGPL300CMP | 3PC COMPOUND PLIERS SET | 1 | |
| CA1010 | COMPOUND - JOINTING, CORROSION INHIBITING, CHROMAT | 1 | |
| CP5063 | ANTI -SEIZE COMPOUND MATERIAL | 1 | |
| D5026NS | CORR INHIBITING COMPOUND | 1 | |
| DPG1000B-30-INHG-100PSI-ON | GAUGE COMPOUND | 1 | |
| DPG1000B-30IN/HG/100PSI-ON | GAUGE COMPOUND | 1 | |
| EC-3524 | LOW DENSITY COMPOUND | 1 | |
| EC1706 | SEALING COMPOUND | 1 | |
| EPIBOND 1590 FST A/B | ADHESIVE COMPOUND | 1 | |
| EPOCAST1619-A/B | POTTING COMPOUND | 1 | |
| F71349-51 | COMPOUND GAUGE | 1 | |
| GS21581-1 | COMPOUND, REMOVAL PIN | 1 | |
| LOCTITE 222, LOCTITE | LOCKING COMPOUND | 1 | |
| LOCTITE 242, LOCTITE | LOCKING COMPOUND | 1 | |
| LUBRIBONDHT | ANTI GALLING COMPOUND | 1 | |
| M12229 | REFLECTIVE COATING COMPOUND | 1 | |
| MA-605S-17L | 5MHZ, 1/4" 60 DEGREE ANGLE, SIDE CONNECTOR, 17 DEGREE COMPOUND LEFT | 1 | |
| MA-605S-17R | 5MHZ, 1/4" 60 DEGREE ANGLE, SIDE CONNECTOR, 17 DEGREE COMPOUND RIGHT | 1 | |
| MA-605S-9L | 5MHZ, 1/4" 60 DEGREE ANGLE, SIDE CONNECTOR, 9 DEGREE COMPOUND LEFT | 1 | |
| MA-605S-9R | 5MHZ, 1/4" 60 DEGREE ANGLE, SIDE CONNECTOR, 9 DEGREE COMPOUND RIGHT | 1 | |
| MIL-C-11796 CLASS 3 | CM 505 CORROSION PREVENTIVE COMPOUND | 1 | |
| MIL-C-81309 | CORROSION PREVENTIVE COMPOUND SPRAY TYPE | 1 | |
| MIL-PRF-16173 | "COMPOUND - CORROSION PREVENTIVE, SOLVENT | 1 | |
| MILS81733TYOPTL | SEALING COMPOUND | 1 | |
| NDT727G | CUSTOM TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (LEFT) USED WITH NDT3021, Part 4 57-50-01 | 2 | |
| NDT728 | CUSTOM TRANSDUCER COMPOUND ANGLE 45 DEGREES IN STEEL. WITH 3.5 INCH HANDLE. REMOVABLE CABLE MOUNT TO MICRODOT CONNECTOR (RIGHT) USED WITH NDT3021, Part 4 57-50-01 | 2 | |
| NSBT-8N | NEVER-SEEZ PURE NICKEL, ANTI-SEIZE AND LUBRICATING COMPOUND | 1 | |
| NU-SHINE IIG6 | POLISHING COMPOUND | 1 | |
| NU-SHINE IIS | POLISHING COMPOUND | 1 | |
| P6900-L | Compound Action Offset Snips (Cut length: 1-3/4" (45 mm)) (Overall length: 10-7/8" (276 mm)) (Type: Left) (Add to cart: Add To Cart) | 1 | |
| P6900-R | Compound Action Offset Snips (Cut length: 1-3/4" (45 mm)) (Overall length: 10-7/8" (276 mm)) (Type: Left) (Add to cart: Add To Cart) (Cut length: 1-3/4" (45 mm)) (Overall length: 10-7/8" (276 mm)) (Type: Right) (Add to cart: Add To Cart) | 1 | |
| PACKTBP3C | 3IN TURBO PAD COMPOUND | 1 | |
| PACKTBP5C | 5IN TURBO PAD COMPOUND | 1 | |
| PACKTBP8C | 8IN TURBO PAD COMPOUND | 1 | |
| PERMATEX80037 | VALVE GRINDING COMPOUND | 1 | |
| PR 1750 A2, LE JOINT FRANÇAIS | SEALING COMPOUND | 1 | |
| PR 1773 B2 | SEALING COMPOUND | 1 | |
| PR 1776 B2 | SEALING COMPOUND | 1 | |
| PR 1829 B2 | SEALING COMPOUND | 1 | |
| PR1771 B2 | SEALING COMPOUND | 1 | |
| PWA 36035 | COMPOUND - ANTI-GALLING COMPOUND | 1 | |
| PWA36000-3 | SEALING COMPOUND | 1 | |
| PWA586 | ANTISEIZE COMPOUND | 1 | |
| PWC05-019 | COMPOUND LAPPING | 1 | |
| PWC06-004 | ANTISEIZE COMPOUND | 1 | |
| PWC06-023 | ANTI-SEIZE COMPOUND | 1 | |
| PWC09-002 | COMPOUND LOCKING | 1 | |
| PWC09-003 | COMPOUND PRESERVATIVE | 1 | |
| PWC11-013 | COMPOUND, CARBON REMOVING | 1 | |
| SPL-10108 | COMPOUND CORROSION INHIBITING | 1 | |
| SPL-6784 | COMPOUND CORROSION INHIBITING 5 LITRE CAN | 1 | |
| T3159-037 | NEST POTTING COMPOUND | 1 | |
| TEK-0576L | CUSTOM 25° "L" - WAVE TRANSDUCER WITH A 2° COMPOUND ANGLE (BACKSHOOTER) 5.0 MHZ .25" X .25" ELEMENT WITH A 1.65" RADIUS, LEFT SIDE USED WITH NDT3272 INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| TEK-0576R | CUSTOM 25° "L" - WAVE TRANSDUCER WITH A 2° COMPOUND ANGLE (BACKSHOOTER) 5.0 MHZ .25" X .25" ELEMENT WITH A 1.65" RADIUS, RIGHT SIDE USED WITH NDT3272 INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
