| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| D47008 | CLAMPING | 2 | |
| H47644 | CLAMPING | 2 | |
| H47743 | CLAMPING | 2 | |
| H47746 | CLAMPING | 2 | |
| H47747 | CLAMPING | 2 | |
| H47758 | CLAMPING | 3 | |
| H47765 | CLAMPING | 1 | |
| H47770 | CLAMPING | 2 | |
| J47078 | CLAMPING | 1 | |
| J47095 | CLAMPING | 2 | |
| J47179 | CLAMPING | 2 | |
| M46265 | CLAMPING | 2 | |
| M46451 | CLAMPING | 2 | |
| PWA12632 | CLAMPING | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| DK 7025 | hook ,clamping | 1 | |
| (CALIB) 201137-CA | PROPELLER LIFTER -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| (CALIB) 341206-29 | BOOSTRAP -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECHNICAL RE | 1 | |
| (CALIB) 95-92123-0001 | CLAMPING DEVICE (CALIBRATION) | 1 | |
| (CALIB) 98D71203501002 | BOOSTRAP A-320 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| (CALIB) 98L27208568000 | DEVICE DEVICE - CLAMPING, CAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S71000003001 | ENGINE SLING -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECHNICA | 1 | |
| (CALIB) 98S71003000002 | FIXTURE ENG/PROP R/I -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | 1 | |
| (CALIB) C71003-247 | BOOTSTRAP KIT CFM56-3 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | 1 | |
| (CALIB) M6458-1 | BOOSTRAP A-320 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| 012A0045-1 | DRILL/REAM/CLAMPING TOOL KIT | 1 | |
| 094-0000-01W1 | CLAMPING JAWS | 1 | |
| 0U141859 | CLAMPING THIMBLE | 1 | |
| 1.305.254 | CLAMPING PLATE WITH HANDGRIPS & EJECTION PLATE, 250 MM | 1 | |
| 10C1103G01 | FIXTURE, CLAMPING - NO. 3 BEARING ASSEMBLY, INLET GEARBOX (CLAMPING FIXTURE) | 1 | |
| 11C3041 | FIXTURE - CLAMPING-HPT ROTOR BLADE STG 1 | 1 | |
| 130.5211 | BRAKE CLAMPING PLATES 125MM 150MM 175MM | 1 | |
| 130.5212 | BRAKE CLAMPING PLATES 125MM 150MM 175MM | 1 | |
| 130.5215 | BRAKE CLAMPING PLATES 125MM 150MM 175MM | 1 | |
| 130.5254 | CLAMPING PLATE WITH HANDGRIPS & EJECTION PLATE, 250 MM | 1 | |
| 139W00-403-32 | CLAMPING TOOL | 1 | |
| 15794 | CATCH,CLAMPING | 1 | |
| 15822 | CATCH,CLAMPING | 1 | |
| 15824 | CATCH,CLAMPING | 1 | |
| 42450 | CLAMPING PLATE | 1 | |
| 91153 | CLAMPING JAW | 1 | |
| 1120203 | BLOCK, CLAMPING | 1 | |
| 6796342 | Clamping Plate | 1 | |
| 6872544 | Clamping Rings | 2 | |
| 58450119 | CLAMPING INSERT SET | 1 | |
| 83720088 | CLAMPING BLOCK | 1 | |
| 83720118 | Clamping Block | 1 | |
| 83760341 | POSITIONING AND CLAMPING TOOL | 1 | |
| 83760381 | POSITIONING AND CLAMPING TOOL | 1 | |
| 169060012 | CLAMPING SET | 1 | |
| 1C6905 | CLAMPING SET, O-RING INSTALLATION | 1 | |
| 1C6905 REV C | CLAMPING SET, O-RING INSTALLATION | 1 | |
| 1C6905G01 | Clamping Set, O-Ring Installation | 1 | |
| 1M14078 | CLAMPING RING | 1 | |
| 1X56 134 511 | CLAMPING RALL | 1 | |
| 1X56136533 | CLAMPING RALL | 1 | |
| 1X56153866 | CLAMPING DEVICE | 1 | |
| 289487-1 | Nut Clamping Tool | 1 | |
| 2C14772 | FIXTURE CLAMPING- STAGE 1 LP TURBINE SHROUD | 1 | |
| 2C14772 REV A | FIXTURE CLAMPING- STAGE 1 LP TURBINE SHROUD | 1 | |
| 2C14772G01 | FIXTURE, CLAMPING STG 1 LPT SHROUD | 1 | |
| 2C14772G01TK | FIXTURE, CLAMPING-STAGE 1 LPT SHROUD | 1 | |
| 2F11181 | Clamping Fixture | 1 | |
| 2F11182 | FIXTURE CLAMPING | 1 | |
| 2F11185 | Clamping Fixture | 1 | |
| 2F11186 | Clamping Fixture | 1 | |
| 30-902-6300 | Sylvac 30-902-6300 3 Jaw Chuck Clamping Range 1-15mm | 1 | |
| 30-902-6301 | Sylvac 30-902-6301 3 Jaw Chuck Morse 2 Clamping Range 2-50mm | 1 | |
| 320-4-44816-101 | FUEL CELL BALLISTIC RING CLAMPING AND LOCATING DEVICE | 1 | |
| 3J12732 | FIXTURE, CLAMPING | 1 | |
| 4920-99-617-1768 | CLAMPING TOOL | 1 | |
| 55483S0000 | CLAMPING FIXTURE | 1 | |
| 55576S0000 | CLAMPING JAW | 1 | |
| 55605S0000 | CLAMPING FIXTURE | 1 | |
| 558-1-05785 | NAMEPLATE CLAMPING TOOL | 1 | |
| 56036S0000 | CLAMPING PIECE | 1 | |
| 56063S0000 | CLAMPING FIXTURE | 1 | |
| 56541S0000 | CLAMPING JAWS | 1 | |
| 56598S0000 | CLAMPING JAW | 1 | |
| 56724S0100 | CLAMPING PIECE | 1 | |
| 56724S0200 | CLAMPING JAW | 1 | |
| 570-4476-02 | CLAMPING FIXTURE | 1 | |
| 57035-140-1 | CLAMPING SCREW | 1 | |
| 58041A0000-01 | CLAMPING PIECE | 1 | |
| 58144-0001 | CLAMPING JAW | 1 | |
| 58144-0002 | CLAMPING JAW | 1 | |
| 58144A0000-01 | CLAMPING JAW SET | 1 | |
| 58371A0000-01 | CLAMPING FIXTURE (58371A0000-01) | 1 | |
| 58371A0000-01PM | CLAMPING FIXTURE (58371A0000-01) | 1 | |
| 58917A0000-01 | CLAMPING FIXTURE (58917A0000-01) | 1 | |
| 58917A0000-01PM | CLAMPING FIXTURE (58917A0000-01) | 1 | |
| 59132A0000-01 | SPRING CLAMPING FIXTURE | 1 | |
| 59492A0000-01 | CLAMPING FIXTURE | 1 | |
| 59492A0000.01 | CLAMPING FIXTURE | 1 | |
| 600-058 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 7 | |
| 606738-00 | BRAID CLAMPING | 1 | |
| 6137MT000-063 | CLAMPING PLATE | 1 | |
| 62015K2 UNTHREADED | STEEL STAR CLAMPING KONBS ALU M8 UNTHREADED | 1 | |
| 63625K35 | CLAMPING KNOB | 3 | |
| 63625K95 | CLAMPING KNOB | 2 | |
| 6498A0200-01 | Clamping Jaws | 1 | |
| 6872544-2 | CLAMPING RING 1 SET (INCLUDED WITH 6872544) | 1 | |
| 7-562100041-3 | M/R PITCH HOUSING CLAMPING FIXTURE | 1 | |
| 833002-1 | CLAMPING RING | 1 | |
| 856A1204G01 | FIXTURE, CLAMPING | 10 | |
| 856A1211 | FIXTURE, CLAMPING-NO.3 BRG. ASSY. INLET GEARBOX | 1 | |
| 856A1211 REV B | FIXTURE, CLAMPING-NO.3 BRG. ASSY. INLET GEARBOX | 1 | |
| 856A1211G01 | Fixture, Clamping - No. 3 Bearing Assembly, Inlet Gearbox (clamping fixture) | 9 | |
| 856AI2II | FIXTURE, CLAMPING-NO.3 BRG. ASSY. INLET GEARBOX | 1 | |
| 8811 937 000/PHP | CLAMPING TOOL AND WRENCH | 1 | |
| 8811937000 | CLAMPING TOOL AND WRENCH | 2 | |
| 8813 959 000/PHP | CLAMPING TOOL AND CENTERING WRENCH | 1 | |
| 8813959000 | CLAMPING TOOL and CENTEREING WRENCH | 1 | |
| 8818837000 | GEAR CLAMPING TOOL | 2 | |
| 8C2010 | FIXTURE, CLAMPING - HPT ROTOR BLADE, STG 1 | 1 | |
| 8N40CE1O | ADJUSTABLE CLAMPING LEVER, COLOR ORANGE | 1 | |
| 956A3021 | FIXTURE - CLAMPING - HPT ROTOR BLADE - STG 1 | 1 | |
| 97F57508263200 | CLAMPING JAW | 1 | |
| 97F57508263202 | CLAMPING JAW | 1 | |
| 98A27508060104 | CLAMPING LEDGE | 1 | |
| 98A52308021000 | CLAMPING - DEVICE, UDC DOOR | 1 | |
| 98A54403021000 | TOOL-CLAMPING,SHACKLE REMOVAL,RIB18 | 2 | |
| 98D27504030001 | FLAPS/SLATS TORQUE SHAFT LOCK (CLAMPING DEVICE) | 26 | |
| 98D27804011000 | CLAMPING DEVICE | 26 | |
| 98F27407513400 | CLAMPING DEVICE COMPLETE | 1 | |
| 98F27508233102 | CLAMPING UNIT | 1 | |
| 98F29208412102 | CLAMPING LEVER | 1 | |
| 98L27208568000 | DEVICE - CLAMPING, CAM | 3 | |
| 98L32104020218 | CLAMPING BLOCK | 1 | |
| 98L52108506104 | UPPER CLAMPING PIECE W.RUBBER | 1 | |
| 98L52108506106 | LOWER CLAMPING PIECE W.RUBBER | 1 | |
| 98L52108633104 | CLAMPING PIECE LINING W.RUBBER | 1 | |
| 98S71205000000 | SIDE ENGINE MOUNT TORQUE W RENCH CLAMPING KEY | 11 | |
| A094-0000-01W1A | CLAMPING JAW | 1 | |
| A21527 | CLAMPING TOOL | 1 | |
| A35199 | PNEUMATIC PLIERSPNEUMATIC PLIERS FOR E0805 METALLIC CLAMPING STRIP INSTALLATION | 1 | |
| A40199 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 6 | |
| AM29366 | CLAMPING PLATES (2 IT) | 1 | |
| AV1000A4 | CLAMPING RING | 1 | |
| B16812-1 | CLAMPING PLATE | 1 | |
| C57003-17 | CLAMPING PLATE | 1 | |
| CJMD127-004 | RUDDER PEDAL CLAMPING TOOL | 1 | |
| CJMDL27-004 | RUDDER PEDAL TENSION/CLAMPING TOOL KIT | 2 | |
| CJMDL27-004 | RUDDER PEDAL TENSION / CLAMPING | 2 | |
| CLAMPINGT00L | CLAMPING TOOL | 1 | |
| CP30857 | LD FAN MODULE - FRONT AND REAR CLAMPING KIT - RB211-22B-524 & 524G | 1 | |
| CTGR8845-7 | CLAMPING LEVER COMPLETE | 1 | |
| CTGR8850-2 | CLAMPING NUT | 1 | |
| DBS-2100 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 5 | |
| DIN1481-6X45-A2 | CLAMPING SLEEVE | 1 | |
| E0805-1 | CLAMPING STRIP | 1 | |
| E0805-2 | METALLIC CLAMPING | 1 | |
| E0805-3 | METALLIC CLAMPING 6.35MM | 1 | |
| EAM0032G02A | WASHER TOOL CLAMPING 6200 | 1 | |
| ECSPG152 | CLAMPING WORK LIGHT BLACK | 1 | |
| F26572000 | CLAMPING DEVICE FIGURE 903 | 1 | |
| F28372000 | TOOL TOOL-CLAMPING | 1 | |
| FAT06-35-42000 | CLAMPING NLG | 1 | |
| G27024-1 | Clamping tool | 9 | |
| G35002-2 | Clamping piece | 1 | |
| G601R275402-131 | CLAMPING PIN, FLAP CONTOUR BOARDS | 1 | |
| G601R783701-1 | Clamping fixture, | 3 | |
| GN300-45M5RT | LEVER, CLAMPING | 1 | |
| GSE435 | CLAMPING FIXTURE | 1 | |
| GU30587 | CLAMPING RING | 1 | |
| GU30588 | CLAMPING ROD | 1 | |
| HU17340 | CLAMPING TOOL | 1 | |
| HU37868 | Clamping Ring | 1 | |
| HU80887 | PAD,CLAMPING | 3 | |
| IAE 1M14078 | CLAMPING RING | 1 | |
| IAE1F10304 | FIXTURE CLAMPING | 1 | |
| IAE1F10319 | Fixture Clamping | 1 | |
| IAE1M14080 | RING, CLAMPING | 1 | |
| IAE1M14081 | RING, CLAMPING | 1 | |
| IAE1M14089 | RING, CLAMPING | 1 | |
| IAE1M14090 | IAE 1M14090 CLAMPING JAW | 1 | |
| IAE1M14098 | JAW, CLAMPING | 1 | |
| IAE1M14142 | RING, CLAMPING | 1 | |
| IAE1M14364 | CLAMPING JAW | 1 | |
| IAE2F10137 | FIXTURE, CLAMPING | 1 | |
| IAE2F10143 | FIXTURE, CLAMPING | 1 | |
| IAE2F10144 | FIXTURE, CLAMPING | 1 | |
| IAE2F10148 | ADAPTER, CLAMPING | 1 | |
| J47398 | CLAMPING DEVICE | 2 | |
| JTF4467F2 | CLAMPING FIXTURE | 1 | |
| K27040-1 | CLAMPING EQUIPMENT | 9 | |
| K551032 | Mitutoyo K551032 - Clamping claw eco-fix | 1 | |
| L-5217 | JAW, CABLE CLAMPING | 2 | |
| L133M6201101 | CLAMPING DEVICE | 2 | |
| L133M6201101/PHP | CLAMPING DEVICE MAIN ROTOR | 1 | |
| L5215 | JAW, CABLE CLAMPING | 3 | |
| L5217 | JAW, CABLE CLAMPING | 2 | |
| LB722 | JAW, CABLE CLAMPING | 3 | |
| LL1007A065 | CLAMPING RING | 1 | |
| M22520/1-01 | NAIL CLAMPING PLIERS KIT (BIG BLUE) | 26 | |
| M22520/2-01 | NAIL CLAMPING PLIERS KIT (SMALL BLUE) | 18 | |
| M22520/7-01 | NAIL CLAMPING PLIERS KIT (LITTLE GREEN) | 9 | |
| MBEU121608 | PLATE CLAMPING SIDE ASSY FRONT | 1 | |
| MBJ9144 | TONGS, CLAMPING, BAROSTAT-BTRU | 1 | |
| MIT012A0045-1 | DRILL/REAM/CLAMPING TOOL KIT | 1 | |
| MMQ6296N9 | CLAMPING SUPPORT | 1 | |
| MW-Z40020 | Moore & Wright MW-Z40020 Dovetail Stem 4mm Clamping Diameter | 1 | |
| MW-Z40022 | Moore & Wright MW-Z40022 Dovetail Stem 8mm Clamping Diameter | 1 | |
| NSA8602-03 | CLAMPING RING | 1 | |
| OUT141 | TOOL TO RETRACT THEVCONNECTOR CLAMPING CATCHES | 2 | |
| PWA 47901B | CLAMPING PLATE | 1 | |
| PWA25555 | PLATE - HPC DISK CLAMPING_[PWA25555] | 1 | |
| PWA26133 | FIXTURE - FAN ROTOR CLAMPING_[PWA26133] | 1 | |
| PWA75529 | ROD,CLAMPING - REAR COMP ASSY_[PWA75529] | 1 | |
| PWC47021 | Clamping tool | 1 | |
| PWC51217 | clamping ring | 1 | |
| PWC51408 | clamping ring | 1 | |
| PWC68665 | Clamping tool | 1 | |
| PWC68779 | CLAMPING TOOL | 3 | |
| PWC69018 | CLAMPING TOOL | 1 | |
| PWC69108 | Clamping ring | 1 | |
| Q46278 | CLAMPING SUPPORT | 1 | |
| R-L133M6201101 | CLAMPING DEVICE MAIN ROTOR | 1 | |
| RB600N6051-1-CF1 | Clamping Fixture | 1 | |
| RBE1X56-153-866 | CLAMPING DEVICE | 1 | |
| RBW109-3131-03-103 | Tail Rotor Pitch Adjustment Clamping Assemblies | 1 | |
| S4-3300346W01 | CLAMPING JAW | 1 | |
| SP53341 | ASSEMBLY-CLAMPING SCREW | 1 | |
| ST0025675 | PLASTIC CAP FOR CLAMPING SHOE | 1 | |
| STP10P3C20 | Sioux® Pneumatic Tappers (Clamping capacity: #10-5/16") (Free rpm: 300) (Overall length: 7.3" (185 mm)) (Add to cart: Add To Cart) | 1 | |
| STP10P3C32 | Sioux® Pneumatic Tappers (Clamping capacity: #10-5/16") (Free rpm: 300) (Overall length: 7.3" (185 mm)) (Add to cart: Add To Cart) (Clamping capacity: 1/4"-1/2") (Free rpm: 300) (Overall length: 7.3" (185 mm)) (Add to cart: Add To Cart) | 1 | |
| T6240297 | CLAMPING FIXTURE | 1 | |
| TFH213-360 | SEAT TRACK CLAMPING UNIT (INTERNAL AIRBUS-NORM PART) | 1 | |
| TG-01 | CLAMPING TOOL | 1 | |
| TGUA003 | Bowers TGUA003 Universal Clamping Inserts (Single) | 1 | |
| TM4811G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5875G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5896G003 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5897G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5898G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5899G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5926G001 | CLAMPING TOOL | 1 | |
| TM5974G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM7217G001 | WRENCH AND CLAMPING TOOL - METALIC | 1 | |
| TO9638-3 | CLAMPING TOOL | 1 | |
| TP158 | CLAMPING PLIER | 1 | |
| UL38642 | CLAMPING TOOL (LOCKOUT BRACKET) | 1 | |
| VM0-41 | CLAMPING FIXTURE FOR ACTUATOR | 1 | |
| VM0-42 | CLAMPING FIXTURE FOR PISTON ROD | 1 | |
| VM0-43 | CLAMPING FIXTURE FOR ACTUATOR | 1 | |
| VM0-44 | CLAMPING FIXTURE FOR PISTON ROD | 1 | |
| VSG74 | 5PC CLAMPING SET | 1 | |
| lC6905 | CLAMPING SET, O-RING INSTALLATION | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
