| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| CJMD527-101 | CK FIXTURE | 3 | |
| CJMD827-001 | CK FIXTURE | 2 | |
| CJMD827-002 | CK FIXTURE | 2 | |
| CJMD827-003 | CK FIXTURE | 2 | |
| CJMD827-005 | CK FIXTURE | 2 | |
| SPF-4 | CK FIXTURE | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 856A1818 | FIXTURE, SEATING, CK CORE | 2 | |
| (CALIB) 2C5122P01 | FIXTURE, LPT ROTOR SEATING CHECK (CALIBRATION) | 1 | |
| (CALIB) 2C5186P01 | FIXTURE, HPT ROTOR SEATING CHECK (CALIBRATION) | 1 | |
| (CALIB) 856A2667G06 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR (CALIBRATION) | 1 | |
| (CALIB) 98S71003000002 | FIXTURE ENG/PROP R/I -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | 1 | |
| (CALIB) DRT68216 | Shock Strut Load Fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GS25565-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE (CALIBRATION) | 1 | |
| (CALIB) J34002-19 | Test Fixture - Angle of attack (CALIBRATION) (CALIBRATION) | 1 | |
| 02-7935C0000 | Tripod Jack Proof Load Fixture | 4 | |
| 02554-000 | CHECK FIXTURE, VENT VALVE | 1 | |
| 061-23955J | CHECKING FIXTURE | 1 | |
| 098553 | VALVE LOCKING FIXTURE | 1 | |
| 0T900-0239 | TRACK SETTING FIXTURE | 1 | |
| 0T900-0247 | SEAT TRACK SETTING FIXTURE ASSEMBLY | 5 | |
| 0T900-0309 | FIXTURE - TRACK SETTING (FOR SEAT P/N 3A064-SERIES) | 1 | |
| 0T900-0311 | TRACK SETTING FIXTURE | 1 | |
| 0T900-052Y | TRACK SETTING FIXTURE | 1 | |
| 0T900-0559 | FIXTURE - TRACK SETTING | 1 | |
| 0T900-0927 | TRACK SETTING FIXTURE | 2 | |
| 0T9000247 | FIXTURE TRACK SETTING | 5 | |
| 0U141935 | ALIGNMENT CHECKING FIXTURE | 1 | |
| 0U142577 | CHECKING FIXTURE | 1 | |
| 0U190818 | HYD VALVE BLOCK TEST FIXTURE | 1 | |
| 0U191185 | BRACKET FIXTURE | 1 | |
| 0U191186 | BRACKET FIXTURE | 1 | |
| 0U191187 | BRACKET FIXTURE | 1 | |
| 0U191619 | FIXTURE-BRACKET | 1 | |
| 100-47813 | GEAR LOCK FIXTURE, PRESSURE TEST | 1 | |
| 100-48574 | DRIVE SHAFT LOCK FIXTURE | 1 | |
| 105-15103W6 | BONDING FIXTURE (4 STÜCK) | 1 | |
| 10C1016P01 | Fixture, Adapter - Compressor Rotor Locking Lug | 1 | |
| 10C1155 | FIXTURE, SEATING CHECK - CORE | 1 | |
| 10C1155G02 | FIXTURE, SEATING CHECK - CORE MODULE TO INLET GEAR BOX (SEATING CHECK FIXTURE) (RECOMMENDED) | 1 | |
| 10C1181 | FIXTURE - LOCK - AGB | 1 | |
| 10C1181G01 | FIXTURE, LOCK - AGB | 1 | |
| 10M-8630 | FIXTURE - T/R DIRECTIONAL PILOT VALVE LEAK CHECK TEST | 1 | |
| 114-1146 | THERMAL RELIRF PLUG TEST BLOCK FIXTURE | 1 | |
| 114-252 | FIXTURE FOR CHECKING THERMAL RELIEF | 1 | |
| 114-263 | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 5 | |
| 114-263 PM | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 1 | |
| 114-263PM | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 1 | |
| 114-270 | FIXTURE FOR CHECKING THERMAL RELIEF | 1 | |
| 114G1410-1 | FIXTURE SUPPORT, BRA AND DRILL, BRACKETS AND SYNC SHAFTS | 1 | |
| 1168-501 | UNLOCKING TEST FIXTURE | 1 | |
| 117-12010W60 | SPANNER SOCKET INSERT (FOR FIXTURE TOOL 105-31501 W5) | 1 | |
| 11C3094 | FIXTURE - SEATING - CHECK-NO 2 BEARING | 1 | |
| 11C3094G02 | FIXTURE, SEATING, CHECK - NO. 2 BEARING | 1 | |
| 11C3133 | FIXTURE - LOCK-HP COMPRESSOR ROTOR | 1 | |
| 11C3133G01 | Fixture,lock-hp compressor rotor | 1 | |
| 11C3165 | FIXTURE - STRONGBACK - LIFT - TURN AND RESTRAIN - LPT MODULE | 1 | |
| 11C3165G01 | Fixture,strongback lift,turn&restrain-lpt module | 1 | |
| 11C3454 | FIXTURE - FLOW CHECK-NO 5 LPT BEARING DAMPER | 1 | |
| 11C3454G02 | FIXTURE, FLOW CHECK - NO. 3 BEARING DAMPERS, FHF | 1 | |
| 11C3596 | FIXTURE - PLUG - NO. 5 BEARING OIL FLOW (FLOW CHECK FIXTURE) | 1 | |
| 11C4343 | FIXTURE - STRONGBACK | 1 | |
| 11C4376 | FIXTURE, BRACKET SET, FAN HUB FRAME | 1 | |
| 151719-0-2005 | Fixture Jack | 1 | |
| 151719-0-2005 PM | FIXTURE JACK | 1 | |
| 151719-0-2006 | Fixture Jack | 1 | |
| 151719-0-2006 PM | FIXTURE JACK | 1 | |
| 1698LMT | CHECKING FIXTURE | 1 | |
| 16A13174L1-1 | HOOK ACTUTOR CHECK FIXTURE | 1 | |
| 18C1143 | ASSEMBLY:STACKING FIXTURE | 1 | |
| 18C1170 | FIXTURE GAUGING TURNBUCKL | 1 | |
| 18C1174 | FIXTURE, RUNOUT - KINK CHECK | 1 | |
| 18C1306 | FIXTURE, ROTOR LOCK - BOOSTER | 1 | |
| 18C1341 | FIXTURE, KINK CHECK - HORIZONTAL | 1 | |
| 18C1516 | FIXTURE, TORQUE - NO. 1 BEARING OUTER RACE LOCKNUT | 1 | |
| 18C1531 | FIXTURE, TORQUE - NO. 3 BALL BRG OUTER RACE LOCKNUT | 1 | |
| 18C1535G01 | Fixture Backlash-Bevel Gear | 1 | |
| 18C1552 | FIXTURE, FLOW CHECK - OIL | 1 | |
| 18C1552G01 | Fixture, Flow Check - Oil Damper, No 3 Brg | 1 | |
| 190-S018-401 | MLG LOCKING STAY-TEST FIXTURE | 1 | |
| 1900130 | MOUNTING BLOCK AND SHAFT LOCK FIXTURE | 1 | |
| 1900130-1 | MOUNTING BLOCK AND SHAFT LOCK FIXTURE | 1 | |
| 1900729 | LOCKNUT AND SHAFT FIXTURE | 1 | |
| 1AE1N20043 | CHECK FIXTURE | 1 | |
| 1AE1N20043 LH REV NC DET #2 | CHECK FIXTURE | 1 | |
| 1AE1N20044 | CHECK FIXTURE | 1 | |
| 1AE1N20044 RH REV NC DET #2 | CHECK FIXTURE | 1 | |
| 1AE1N20045 | CHECK FIXTURE | 1 | |
| 1AE1N20045 REV NC DET #2 | CHECK FIXTURE | 1 | |
| 1C5893G01 | Fixture,loadcheck-variable stator feedback cable | 1 | |
| 1C6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS TURBINE RTR | 1 | |
| 1C6065 REV J | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| 1C6872G01 | JACK, FIXTURE, INSTALLATION & REMOVAL - ACCESS GEARBOX, HORIZONTAL | 1 | |
| 1C6895 | FIXTURE,DROP CHECK-COMPRESS | 1 | |
| 1C6895G01 | FIXTURE,DROP CHECK-COMPRESS | 1 | |
| 1C6909 | FIXTURE, DROP CHECK - PT ROTOR, AFT | 1 | |
| 1C6909G01 | FIXTURE, DROP CHECK - PT ROTOR, AFT | 1 | |
| 1C6996 | FIXTURE - CHECK ACTUATOR | 1 | |
| 1C6996G02 | Fixture check-actuator variable stator | 1 | |
| 1C8039G02 | FIXTURE, LIFT JACK - COMPRESSOR STATOR CASES | 1 | |
| 1C9311G02 | FIXTURE, SEAT CHECK - COUPLING NUT, SHAFT,LPT ROTOR | 1 | |
| 1C9403 | FIXTURE, CHECK ACTUATOR | 1 | |
| 1C9403G01 | Fixture- Check Actuators VSV/VIGV | 1 | |
| 1C9613G01 | FIXTURE, LIFT AND TURN LPT HORIZONTAL (STRONGBACK) | 1 | |
| 1C9616 | FIXTURE - SEAT CHECK-COUPLING NUT | 1 | |
| 1C9616G01 | Fixture, Seat Check - Coupling Nut, Shaft | 1 | |
| 1P16265 | CHECKING FIXTURE | 1 | |
| 2000489 | Locking fixture | 1 | |
| 2024046-1 | LEAKAGE CHECK FIXTURE | 1 | |
| 2024475-1 | BACKLASH CHECKING FIXTURE ASSEMBLY | 1 | |
| 2024503-1 | LEAK CHECK FIXTURE | 1 | |
| 2024742-1 | Endplay Check Fixture | 1 | |
| 2025260-1 | Shaft Torque Fixture and Socket | 1 | |
| 2025676-1 | Backlash Fixture | 1 | |
| 211651-0 | PACKING FIXTURE, D31516-XXX | 1 | |
| 211652-0 | PACKING FIXTURE, D31517-XXX | 1 | |
| 211653-4 | PACKING FIXTURE FWD | 1 | |
| 211654-4 | PACKING FIXTURE AFT | 1 | |
| 211945-0 | PACKING FIXTURE LH | 1 | |
| 211946-0 | PACKING FIXTURE RH | 1 | |
| 21C11302G01 | Fixture,Set-Brackets,Fadec | 1 | |
| 21C7110G01 | FIXTURE, PRESSURE CHECK | 1 | |
| 21C7113G01 | FIXTURE, FLOW CHECK | 1 | |
| 21C7113G02 | SPECIAL TOOL - FIXTURE, FLOW CHECK, NOZZLE | 1 | |
| 21C7798G02 | FIXTURE, FLOW CHECK | 1 | |
| 21C8247G01 | Fixture,locking hpc/hpt rotor | 1 | |
| 289922 | FIXTURE, LOCKPLATE REMOVAL | 1 | |
| 2550136 | FIXTURE, BELLOWS HEIGHT CHECK | 2 | |
| 2550148 | FIXTURE- BLEED BLOCK SIMULADOR | 1 | |
| 2550186 | FIXTURE, BELLOWS HEIGHT CHECK | 1 | |
| 2561528 | FIXTURE – BLEED BLOCK | 1 | |
| 23005430 | REAR SUPPORT CONCENTRICITY AND SQUARENESS CHECKING FIXTURE | 2 | |
| 23033028 | FIXTURE CHECKING COMPRESSOR ROTOR TIE BOLT STRETCH | 1 | |
| 23033040 | ADAPTER--PRESSURE CHECK FIXTURE, | 1 | |
| 23054823 | Fixture – Grinding, Turbine Cased Blade Track | 1 | |
| 23054848 | Fixture – Grinding, Offset Gas Generator Blade track Grinding | 1 | |
| 23068592 | Fixture – Flow Check No. 5 Carbon Seal | 1 | |
| 23068617 | Fixture – Flow Check No. 4 Carbon Seal | 1 | |
| 23076508 | Fixture – Flow Check No. 4 Carbon Seal | 1 | |
| 2370-S700-401 | INTERFACE CHECKING FIXTURE | 1 | |
| 247C5113G02 | Fixture,seating check-intmd pwr rotor rotor | 1 | |
| 247C5220 | FIXTURE - SHIPPING BRACKET-STEAM/FUEL MANIFOLD | 1 | |
| 2566532-38 | TRAVEL CHECK FIXTURE ASSEMBLY (CAGE: 06848) | 1 | |
| 269A9203 | RIGGING FIXTURE COLLECTIVE STICK | 1 | |
| 269A9269 | RIGGING FIXTURE CYCLIC STICK | 1 | |
| 269T9203-11 | Rigging Fixture Cyclic Stick Centering (Right) | 1 | |
| 269T9203-7 | Rigging Fixture Cyclic Stick Centering (Left) | 2 | |
| 269T9203-7P | RIGGING FIXTURE CYCLIC STICK CENTERING LEFT | 1 | |
| 269T9269 | RIGGING FIXTURE CYCLIC STICK | 2 | |
| 274046-1-1 | BACKLASH CHECKING FIXTURE | 1 | |
| 28-0-4080 | BACKLASH CHECK FIXTURE | 2 | |
| 282775TF1-101 | Check Valve Test Fixture | 1 | |
| 282775TF2-1 | Check Valve Test Fixture | 1 | |
| 285821-2-1 | FIXTURE ASSY, SHAFT LOCKING | 1 | |
| 285868-2-1 | RUNOUT CHECKING FIXTURE | 1 | |
| 287912-1 | FIXTURE CHECKING GEAR BACKLASH | 1 | |
| 289442-1 | LEAKAGE CHECK FIXTURE | 1 | |
| 289479-1 | FIXTURE TORQUE CHECKING | 1 | |
| 293153-1 | LEAK CHECK FIXTURE | 1 | |
| 293153-1 PM | LEAK CHECK FIXTURE | 1 | |
| 293288-1 | FLAPPER LEAK CHECK FIXTURE | 1 | |
| 293288-2 | FLAPPER LEAK CHECK FIXTURE | 1 | |
| 293406-1 | Bracket alignment fixture assy | 1 | |
| 293406-1PM | BRACKET ALIGNMENT FIXTURE ASSY | 1 | |
| 293643-1 | LEAK CHECKING FIXTURE | 1 | |
| 294545-1 | FLAPPER LEAK CHECK FIXTURE | 1 | |
| 294546-1 | Flapper Leak Check Fixture | 1 | |
| 296038-1 | FLAPPER LEAK CHECK FIXTURE | 1 | |
| 296305-1 | CHECK FIXTURE | 1 | |
| 298026-1 | ROTATING GROUP BACK-UP FIXTURE | 1 | |
| 2C 14094G06 | FIXTURE, SEAL CHECK NO. 4 BEARING AND SEAL | 1 | |
| 2C14094 | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094 REV Y | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094G04 | SEATING CHECK FIXTURE | 1 | |
| 2C14094G05 | FIXTURE, SEATING CHECK ‐ NO. 4B BEARING AND SEAL | 1 | |
| 2C14094G06 | Fixture seatcheck-No 4B bearing and seal | 1 | |
| 2C14096 | FIXTURE, SEATING CHECK LP TURB ROTOR | 1 | |
| 2C14096 REV E | FIXTURE, SEATING CHECK LP TURB ROTOR | 1 | |
| 2C14096G02 | FIXTURE,SEATING CHECK LP TURBINE ROTOR | 1 | |
| 2C14131 | FIXTURE, SEATING CHECK HP TURB. ROTOR | 1 | |
| 2C14131 REV C | FIXTURE, SEATING CHECK HP TURB. ROTOR | 1 | |
| 2C14131G01 | FIXTURE, SEATING CHECK HP TURB | 1 | |
| 2C14131G02 | FIXTURE, SEATING CHECK HPT ROTOR | 4 | |
| 2C14602G03 | FIXTURE, LOCKING – LOW PRESSURE TURBINE ROTOR | 4 | |
| 2C14651 | FIXTURE, CHUCK TABLE - COMPR. ROTOR ASSY | 1 | |
| 2C14651 REV B | FIXTURE, CHUCK TABLE - COMPR. ROTOR ASSY | 1 | |
| 2C14651G01 | CHUCK COMPRESSOR ROTOR ASSEMBLY FIXTURE | 3 | |
| 2C15618 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15618G01 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15619 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C15619G01 | FIXTURE, BOND-BLOCKER DOOR HINGES | 1 | |
| 2C18055G01 | Fixture,check-run on torque-balancing ring nut | 1 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5122P01 | FIXTURE, LPT ROTOR SEATING CHECK | 1 | |
| 2C5186P01 | FIXTURE, HPT ROTOR SEATING CHECK | 1 | |
| 2C5203P01 | FIXTURE, HPT STAGE 2 DISK SEATING CHECK | 1 | |
| 2C5212 | FIXTURE, CONCENTRICITY CHECK | 1 | |
| 2C5212G01 | FIXTURE, FAN CASING CONCENTRICITY CHECK | 1 | |
| 2C5232 | FIXTURE, HPT ROTOR LOCKNUT | 1 | |
| 2C5232P01 | FIXTURE, HPT LOCKNUT CHECKING | 1 | |
| 2C5861G01 | FIXTURE - JACKING | 1 | |
| 2C5937G01 | FIXTURE - BUBBLE CHECK LUBE | 1 | |
| 2C6564 | FIXTURE WATER/AIR FLOW CHECK | 1 | |
| 2C6564G01 | FIXTURE WATER/AIR FLOW CHECK | 1 | |
| 2C6585G01 | STACKING FIXTURE | 1 | |
| 2C6934G03 | A SUMP FAN FRAME FIXTURE LEAK CHECK | 1 | |
| 2C6934G04-AF | FIXTURE,LEAK CHECK-A SUMP, FAN FRAME | 1 | |
| 2C7376G01/G03TK | Stg.1 & 2 HPT Blade Water Flow Check Fixture (CF6-80A3 / C2) | 1 | |
| 2C81145G01 | PRESSURE CHECK B-SUMP FIXTURE | 1 | |
| 2C81182G01 | Fixture measuring shim thickness bevel gear pto | 1 | |
| 2C81221 | FIXTURE, SETTING VG TURNBUCKL | 1 | |
| 2C81221G01 | FIXTURE, SETTING VG TURNBUCKL | 1 | |
| 2C81243G01 | FIXTURE, TURNBUCKLE SET | 1 | |
| 2C81600G01 | FIXTURE, MEASURE BACKLASH BEV | 1 | |
| 2C81600G02 | Fixture,measuring,bevel gear backlash ptd | 1 | |
| 2C81622 | FIXTURE - TARGET CHECK - PTO OI | 1 | |
| 2C81622G01 | FIXTURE - TARGET CHECK - PTO OI | 1 | |
| 2C81631G01 | FIXTURE, LOCKING, PTO BEVEL GE | 1 | |
| 2C81662G01 | Fixture,paitern&backlash-agb | 1 | |
| 2C81955G01 | FIXTURE, LUBE CHECK | 1 | |
| 2C90020G01 | FIXTURE, BACKLASH, PTO ASSY | 1 | |
| 2C90715G01 | FIXTURE, GG ROTOR DROP CHECK HOLDING | 1 | |
| 2C91118 | FIXTURE, HPT ROTOR BACKUP | 1 | |
| 2C91127G01 | FIXTURE ASSY.-FEEDBACK CABLE | 1 | |
| 2C91170G01 | FIXTURE-SHIM THICKNESS | 1 | |
| 2C91213G01 | FIXTURE-CHECKING SHIM BACKLASH | 1 | |
| 2F10321 | FIXTURE CHECKING AXIAL POSITION LPT SHAFT | 1 | |
| 2R1227 | FIXTURE, DRILL-BLOCKER DOOR | 1 | |
| 2RI227 | FIXTURE, DRILL-BLOCKER DOOR | 1 | |
| 2SK50210-1 | FIXTURE - KRUEGER FLAPS ACTUATOR VALVE BLOCK LEAKAGE T | 1 | |
| 2TSJ65B01539-1 | TEST FIXTURE - ACTUATOR, TRUCK POSITIONER, WING LANDING GEAR | 1 | |
| 30R0076G01 | FIXTURE,ROTOR LOCKING, HPC | 1 | |
| 30R0327G01 | SPECIAL TOOL - FIXTURE, LEAK CHECK SWIRL FRAME ANTI-ICING | 1 | |
| 3218AS507-1 | SPINDLE ASSEMBLY CHECK FIXTURE | 1 | |
| 330A93-2024-20 | BLOCK,BEARING FIXTURE | 1 | |
| 350A93-3205-00 | MGB Input Lock Wrench/Holding Fixture | 2 | |
| 355A94-3745-01 | Swashplate Locking Fixture AS355 F2 | 1 | |
| 35M5M01060000 | FIXTURE; POSITIONING, ANGLE-OF-ATTACK SENSOR | 1 | |
| 365A91-3245-01 | REINFORCED NOSE LG LOCKING FIXTURE. | 1 | |
| 365A91-7541-00 | MAIN SERVOCONTROL RETAINING AND LOCKING FIXTURE | 1 | |
| 365A92-4140-02 | MLG LOCK FIXTURE | 1 | |
| 365A92414001 | LOCK FIXTURE | 1 | |
| 376060TF1 | TEST FIXTURE, LEAK CHECK VALVE | 1 | |
| 3791055-1 | FIXTURE SHIM CHECKING | 1 | |
| 3791096-1 | FIXTURE BACKLASH CHECKING | 1 | |
| 3791203-1 | LEAK CHECK FIXTURE | 1 | |
| 3791203-1TK | LEAK CHECK FIXTURE | 1 | |
| 3CF65B80552 | CHECK FIXTURE - STABILIZER JACKSCREW DIFFERENTIAL ASSEMBLY, BACKLASH | 1 | |
| 3T900-0579 | FIXTURE HEIGHTLOCK PLATE SETTING | 1 | |
| 400-8337 | CHECKING FIXTURE, END-PLAY | 1 | |
| 4002-0028-1 | FIXTURE, ARM ASSEMBLY, STIFFNESS AND BACKLASH | 1 | |
| 4076672 | DIAMETER CHECKING FIXTURE | 1 | |
| 42-27-04-013 | CAGING SYSTEM LOCKING FIXTURE | 1 | |
| 4220-0013-1 | FIXTURE, MOUNT ASSEMBLY, STIFFNESS, AND BACKLASH | 1 | |
| 422099 | VALVE LOCKING FIXTURE | 1 | |
| 45-135030-9 | TAB DEFLECTION CHECK FIXTURE | 4 | |
| 45-135030-9/ 810 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 2 | |
| 45-135030-9/810 | TRIM TAB DEFLECTION CHECK FIXTURE (BEECHCRAFT CORP) | 2 | |
| 45-1350309/810RT | TRIM TAB DEFLECTION CHECK FIXTURE (BEECHCRAFT COR | 1 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 482523 | VALVE LOCKING FIXTURE | 1 | |
| 482570 | VALVE LOCKING FIXTURE | 1 | |
| 460004337 | CHECKING FIXTURE | 1 | |
| 460005847 | CHECKING FIXTURE | 2 | |
| 460005860 | CHECKING FIXTURE | 1 | |
| 460007162 | FIXTURE - LOAD, SHOCK STRUT | 3 | |
| 4600067077 | SHOCK STRUT LOAD FIXTURE | 1 | |
| 4711C20702M99CF-1 | Check fixture | 1 | |
| 4711C20903M99CF-1 | Check fixture | 1 | |
| 4920-00-874-2547 | Fixture, End play checking | 1 | |
| 4920-99-382-7210 | CONCENTRICITY CHECKING FIXTURE | 1 | |
| 4920-99-617-1995 | CONCENTRICITY CHECKING FIXTURE | 1 | |
| 4920-99-968-3701 | CHECKING FIXTURE | 1 | |
| 4A3955-1 | PACKING VACUUM FIXTURE | 1 | |
| 4A3955-13 | PACKING VACCUM FIXTURE | 1 | |
| 4A3955-25 | FIXTURE, PACKING VACUUM | 1 | |
| 508512 | FIXTURE, PRESSURE CHECK | 1 | |
| 5120-01-137-3557 | OIL TUBE FIXTURE PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
| 512056 | CHECK VALVE TEST FIXTURE | 1 | |
| 540100-1 | FIXTURE, PACKING, FWD. SLIDE | 1 | |
| 540266 1 | FIXTURE PACKING | 1 | |
| 540266-1 | FIXTURE PACKING | 1 | |
| 55666S0000 | END PLAY CHECKING FIXTURE | 1 | |
| 55855S0000 | BACKLASH MEASURING FIXTURE | 1 | |
| 55948S0000 | BACKLASH CHECKING TESTING FIXTURE | 1 | |
| 55991S0000 | BACKLASH CHECKING FIXTURE | 1 | |
| 56203S0006 | BLOCKING FIXTURE | 1 | |
| 56203S0007 | BLOCKING FIXTURE | 1 | |
| 56213S0000 | BACKLASH FIXTURE | 1 | |
| 56472S0000 | CHECKING FIXTURE | 2 | |
| 56680S0000 | CHECKING FIXTURE | 1 | |
| 56680S0000 | CHECKING FIXTURE ADAPTER | 1 | |
| 5669-1-T3 | TORQUE CHECK FIXTURE | 1 | |
| 56714S0000 | END PLAY CHECKING FIXTURE | 2 | |
| 56945A0000 | BLACKLASH CHECKING FIXTURE | 1 | |
| 56945A0000-01 | BACKLASH CHECKING FIXTURE | 1 | |
| 570-7408-01 | GIMBAL LOCKING FIXTURE | 1 | |
| 57098A0000-01 | FIXTURE TO BACKLASH | 1 | |
| 57099A0000-01 | FIXTURE TO BACKLASH | 1 | |
| 59153A0000-01 | UNLOCKING FIXTURE | 1 | |
| 5916784-1 | Fixture Assy - Static Port Contour Check | 4 | |
| 5916803-1 | MLG DAMPER CHECK FIXTURE | 8 | |
| 59582A0000-01 | END PLAY CHECKING FIXTURE | 1 | |
| 5965877-501 | Align Fixture-Seat Track | 7 | |
| 5981310-1 | FIXTURE JACK IDG | 1 | |
| 5A2990-1 | FIXTURE, CHECK, MAXIMUM ENVELOPE | 1 | |
| 5A3036-1 | FIXTURE, CHECK, MAXIMUM ENVELOPE | 1 | |
| 60323-101 | PACKING FIXTURE | 1 | |
| 60429-101 | PACKING FIXTURE, CANOPY (WITH CARDBOARD INSERTS) 60429-101 | 1 | |
| 60P2700001N001COF | BACKLASH MEASUREMENT FIXTURE | 1 | |
| 6147CT000-041 | CHECKING FIXTURE | 1 | |
| 617-4422-001 | CHECKING FIXTURE | 1 | |
| 62095-101 | PACKING FIXTURE | 1 | |
| 63040010-IAS | TEST FIXTURE SHOCK STRUT ASSY MLG | 1 | |
| 63041017-1 | SHOCK STRUT HOLDING FIXTURE | 1 | |
| 63728-101 | PACKINGFIXTURE/SHIPPING BOX | 1 | |
| 63970-103 | PACKING FIXTURE/SHIPPING BOX | 1 | |
| 64176-101 | PACKING FIXTURE,METAL | 1 | |
| 64540 | FIXTURE, REBUSHING VALVE ROCKER | 1 | |
| 64589-101 | PACKING METAL FIXTURE | 1 | |
| 64589-103 | PACKING FIXTURE | 1 | |
| 64590-101 | PACKING FIXTURE | 1 | |
| 64882-101 | VACUUM ADAPTER USE WITHMETAL PACKING FIXTURES | 1 | |
| 6489-101 | PACKING METAL FIXTURE | 1 | |
| 6723092 | TACK WELD FIXTURE | 1 | |
| 67242-101 | PACKING FIXTURE SHIPPING CONTAINER | 1 | |
| 67360-101 | PACKING FIXTURE ASSEMMBLY | 1 | |
| 67439-101 | PACK HEIGHT CHECK FIXTURE | 1 | |
| 67440-101 | PACK HEIGHT CHECK FIXTURE | 1 | |
| 67441-101 | PACK HEIGHT CHECK FIXTURE | 1 | |
| 67458-102 | PACK HEIGHT CHECK FIXTURE | 1 | |
| 67548-101 | PACK HEIGHT FIXTURE BASE | 1 | |
| 67759-101 | INSERT，PACKING FIXTURE | 1 | |
| 67819-101 | PACKING FIXTURE | 1 | |
| 679-11385-1 | POLARRITY CHECK FIXTURE | 1 | |
| 690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| 6796446 | Check Fixture- Propeller Control Linkage | 1 | |
| 6796602 | FIXTURE, CHECKING, COMBUSTION LINER | 2 | |
| 6796708 | FIXTURE - CHECK, PROPELLER CONTROL LINKAGE | 3 | |
| 6796711 | FIXTURE - CHECKING, TURBINE VANE LOCKING KEY | 2 | |
| 6796712 | FIXTURE - CHECKING, STOCK | 2 | |
| 6796757 | CHECK FIXTURE RIGGING PIN | 3 | |
| 6796793 | COMBUSTION LINER ASSEMBLY CHECKING FIXTURE | 1 | |
| 6796889 | FIXTURE - CHECKING | 1 | |
| 6796937 | FIXTURE - CHECK | 2 | |
| 6796964 | FIXTURE – CHECK, BEARING INTERNAL CLEARANCE | 1 | |
| 6797589 | FIXTURE – BENDING, SUN GEAR HUB LOCK TAB | 2 | |
| 6797590 | SIDE GEAR CHECKING FIXTURE | 2 | |
| 6798227 | FIXTURE, CHECKING, COMPRESSOR VANE ASSEMBLY | 1 | |
| 6798232 | FIXTURE - FUNCTIONAL CHECK, ANTI - ICING ASSY | 2 | |
| 6798787 | FIXTURE-COMPRESSOR DISCHARGE AIR TUBE ASSEMBLY PRESSURE CHECK | 1 | |
| 6799630 | COMP. RTR LAYBRINTH STATOR SEAL CHECKING FIXTURE | 1 | |
| 6799644 | Fixture – Concentricity Checking Turbine Rear Bear | 3 | |
| 6799718 | FIXTURE SPACER CHECKING | 1 | |
| 6799868 | BENDING TORQUEMETER-TO-SAFETY COUPLING MOUNTING BOLT LOCKTAB FIXTURE | 1 | |
| 67999-101 | HEIGHT CHECK FIXTURE | 1 | |
| 68482-101 | PACKING FIXTURE BASE ASSEMBLY | 1 | |
| 68635-101 | HEIGHT CHECK FIXTURE | 1 | |
| 68637-101 | HEIGHT CHECK FIXTURE BASE | 1 | |
| 68647-103 | PACKING FIXTURE ASSEMBLY | 1 | |
| 68661-101 | HEIGHT CHECK FIXTURE | 1 | |
| 68662-101 | HEIGHT CHECK FIXTURE BASE | 1 | |
| 68676-101 | PACKING FIXTURE INSERT | 1 | |
| 68678-101 | PACKING FIXTURE INSERT | 1 | |
| 6872178 | FIXTURE - FLOW CHECK AND TARGET | 1 | |
| 6872180 | FIXTURE - FLOW CHECK | 1 | |
| 6872283 | FIXTURE - CHECKING | 1 | |
| 6872475 | FIXTURE - CHECKING | 1 | |
| 6872532 | FIXTURE - CHECKING | 1 | |
| 6872804 | FIXTURE - PRESSURE CHECK | 1 | |
| 6872880 | FIXTURE一CHECKING | 1 | |
| 6873066 | FIXTURE----CHECKING, COMPRESSOR AXIS | 1 | |
| 6874005 | HOLDING FIXTURE, CHECK VALVE PLUG | 1 | |
| 6877001 | TACK WELD FIXTURE COVER | 1 | |
| 6877006 | HOLDING FIXTURE CHECK VALVE PLUG | 1 | |
| 6877014 | PURGE FIXTURE, AIR (CHECK VALVE REMOVAL) BACK PRESSURES FUEL NOZZLE TO BLOW CHIPS OUT OF NOZZLE DURING CHECK VALVE MACHINING OPERATION. | 1 | |
| 6877024 | TACK WELD FIXTURE PRIMARY AND SECONDARY BODY | 1 | |
| 6877028 | STEM HOLDING FIXTURE HOLDS WEAR SLEEVE AND FUEL NOZZLE IN POSITION DURING TACK WELD OPERATION. | 1 | |
| 6877029 | LEAK TEST FIXTURE, CARTRIDGE VALVE HOLDS CARTRIDGE VALVE FOR CHECKING VALVE SEAL. | 1 | |
| 6877110 | Fixture – Back Flush Fuel Nozzle | 1 | |
| 6887000 | PRESSURE DECAY TEST FIXTURE CHECKS PRESSURE LOSS THROUGH CHECK VALVE SEAT. | 1 | |
| 6887819 | Fixture â Checking, Gas Producer and Power Turbine Supports Bearing Bores | 2 | |
| 68921-101 | HEIGHT CHECK FIXTURE | 1 | |
| 6893363 | FIXTURE - PRESSURE CHECK | 1 | |
| 6893383 | SHIM CHECKING FIXTURE | 2 | |
| 68936-062-1 | BALANCING FIXTURE FOR ROCKING SHAFT | 1 | |
| 6897107 | PRE QUALIFYING FIXTURE, CHECK VALVE HOLDS CHECK VALVE DURING TESTING. | 1 | |
| 69323-101 | HEIGHT CHECK FIXTURE | 1 | |
| 69356-101 | HEIGHT CHECK FIXTURE | 1 | |
| 69967-101 | PACKING FIXTURE AFT | 1 | |
| 69968-101 | PACKING FIXTURE FWD | 1 | |
| 70001-T11 | Torque Motor Backflush Fixture | 1 | |
| 70001T11 | TORQUE MOTOR BLACK FLUSH FIXTURE | 1 | |
| 70157-101 | PACKING FIXTURE | 1 | |
| 70597-101 | PACKING FIXTURE | 1 | |
| 71509T12 | BACK-FLUSH MANIFOLD FIXTURE | 1 | |
| 71698-101 | PACKING FIXTURE | 1 | |
| 71698-102 | PACKING FIXTURE | 1 | |
| 71915-101 | PACKING FIXTURE INSERT | 1 | |
| 72P576000*N001CF | AILERON CHECKING FIXTURE | 1 | |
| 734-60988 | PILOT CHECK VALVE TEST FIXTURE (EQUIVALENT TO 737-11191) | 1 | |
| 734-60990 | CHECK VALVE TEST FIXTURE (EQUIVALENT TO 737-11193) | 1 | |
| 734-68317 | CHECK VALVE TEST FIXTURE | 1 | |
| 734-68318 | CHECK VALVE TEST FIXTURE | 1 | |
| 8007371300 | CHECKING FIXTURE | 1 | |
| 8007371400 | CHECKING FIXTURE | 1 | |
| 810 45-135030-9 | TRIM TAB DEFLECTION CHECK FIXTURE (BEECHCRAFT CORP) | 1 | |
| 810-45-135030-9 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 1 | |
| 81045-135030-9 | TRIM TAB DEFLECTION CHECK FIXTURE (BEECHCRAFT COR | 1 | |
| 811-00394 | COCKING FIXTURE | 1 | |
| 830006-401-00736 | MAIN TRANSMISSION BACKLASH & RUNOUT INSP. FIXTURES | 1 | |
| 833097-1 | RUNOUT CHECKING FIXTURE | 1 | |
| 833115-1 | BLOCKING FIXTURE | 1 | |
| 833283-1 | Bearing Preload check fixture | 1 | |
| 833283-1PM | BEARING PRELOAD CHECK FIXTURE | 1 | |
| 833932-1 | FIXTURE RUNOUT CHECKING | 1 | |
| 834236-1 | Bearing Check Fixture | 1 | |
| 834236-1PM | BEARING CHECK FIXTURE | 1 | |
| 834236-2 | BEARING CHECK FIXTURE | 1 | |
| 834424-1 | Assembly And Check Fixture | 1 | |
| 834425-1 | Check Fixture | 1 | |
| 834632-1 | ENDPLAY CHECKING FIXTURE | 1 | |
| 834860-1 | VACUUM CHECK FIXTURE | 1 | |
| 835673-1 | BACKLASH CHECK FIXTURE ADAPTER | 1 | |
| 8429E | 150 TON AXLE & TRIPOD JACK TEST FIXTURE | 2 | |
| 846-911-100-1 | Locking fixture-hpcs vsv ring 1/2 | 1 | |
| 852D102/05 | HOLDING FIXTURE BACKLASH | 1 | |
| 85414001-001-58 | CHECKING FIXTURE, GEAR LUG REPL, MLG | 1 | |
| 85424001-001-58 | ALIGNMENT FIXTURE - MLG SENSOR/TARGET BRACKET | 1 | |
| 85424001-001-58-1 | ALIGNMENT FIXTURE - MLG SENSOR/TARGET BRACKET | 1 | |
| 85424076-105-58 | ALIGNMENT FIXTURE - MLG SENSOR BRACKET | 2 | |
| 856A 2380G02 | FIXTURE CHECKING CENTER VENT TUBE INNER SUPPORT | 5 | |
| 856A1053 | FIXTURE, IMPINGMENT CHECK - LUBE JET | 1 | |
| 856A1053P01 | Fixture, Impingement Check - Lube Jet (impingement check fixture) | 3 | |
| 856A1053P03 | FIXTURE, IMPINGEMENT CHECK - LUBE JET (IMPINGEMENT CHECK FIXTURE) | 1 | |
| 856A1155 | FIXTURE, CHUCK TABLE | 1 | |
| 856A1155P02 | FIXTURE, CHUCK/TABLE | 1 | |
| 856A1155P03 | FIXTURE, CHUCK/TABLE | 1 | |
| 856A1155P04 | Fixture Chuck/Table | 1 | |
| 856A1155P05 | FIXTURE, CHUCK/TABLE | 1 | |
| 856A1155P06 | Fixture, Chuck | 5 | |
| 856A1290 | FIXTURE, R/O CHECKS | 1 | |
| 856A1818 | FIXTURE, SEATING, CK CORE | 2 | |
| 856A1818G02 | FIXTURE,SEATING,CK CORE | 8 | |
| 856A1820G01 | FIXTURE SUPPORT HP COMPR ROTOR ASSY STACK PROJECTION | 5 | |
| 856A1839G01 | FIXTURE, DISASSY-HPTR/HPCR (JACKSCREW) | 8 | |
| 856A1865G01 | FIXTUE. TORQUE - NO. 3 BEARING LOCK NUT (TORQUE FIXTURE) | 3 | |
| 856A1865G04 | Fixture, Torque - No. 3 Bearing Lock Nut (torque fixture) | 6 | |
| 856A1874G01 | FIXTURE, SUPPORT-STACK PROJECTION- | 2 | |
| 856A2344G01 | Fixture Check Dimension | 1 | |
| 856A2380 | FIXTURE, CHECKING-CENTER VENT TUBE INNER SUPPORTS | 1 | |
| 856A2380G02 | Fixture, Checking - Center Vent Tube Inner Support (checking fixture) | 5 | |
| 856A2416 | CHECKING FIXTURE - INTMD FLANGE | 1 | |
| 856A2649 | FIXTURE, LOCKING/TURNING CORE ENGINE | 1 | |
| 856A2649 REV NC | FIXTURE, LOCKING/TURNING CORE ENGINE | 1 | |
| 856A2649G01 | Fixture Lock Turn Core & Lini Pot | 1 | |
| 856A2667 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G01 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G02 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G03 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G04 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 8 | |
| 856A2667G05 | AD2 RUNOUT CHECKING FIXTURE - FAN | 1 | |
| 856A2667G06 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 7 | |
| 856A2733 | FIXTURE, LOCK HORZ GEAR | 1 | |
| 856A2733G03 | Fixture Lock Horizontal | 3 | |
| 856A2733G04 | HORIZONTAL LOCKING FIXTURE - BEVEL | 1 | |
| 856A2739 | FIXTURE, LOCK INPUT GEAR | 1 | |
| 856A2739G03 | Fixture, Locking - Input Bevel Gear (locking fixture) | 3 | |
| 856A2744G01 | FIXTURE, LOCKING | 3 | |
| 856A2746G01 | FIXTURE, CHECKING, BACKLASH | 5 | |
| 856A2748 | FIXTURE, CHECK BACKLASH | 1 | |
| 856A2748G01 | Fixture Check Backlash | 1 | |
| 856A2748G03 | FIXTURE, CHECKING | 4 | |
| 856A2792G01 | LOCKING FIXTURE AND SOCKET | 6 | |
| 856A2798 | FIXTURE, LOCK AB | 1 | |
| 856A2798G01 | Fixture Lock AGB | 5 | |
| 856A2923G02 | CHECKING FIXTURE | 1 | |
| 856A2924 | FIXTURE, CHECK | 1 | |
| 856A2924G01 | Checking Fixture | 6 | |
| 856A3069 | FIXTURE, LOCKING - RADIAL DRIVE SHAFT (LOCKING FIXTURE) | 1 | |
| 856A3127 | FIXTURE, LOCKING - HORIZONTAL BEVEL GEAR, TGB (LOCKING FIXTURE) | 1 | |
| 856A3127G02 | Fixture, locking-horizontal | 1 | |
| 856A3142 | FIXTURE, LOCKING - INPUT BEVEL GEAR, TGB (LOCKING FIXTURE) | 1 | |
| 856A3270 | FIXTURE, LOCK | 1 | |
| 856A3294 | FIXTURE, LOCKING - STARTER BEVEL GEAR, TGB (LOCKING FIXTURE) | 1 | |
| 856A3294G01 | Fixture, locking Starter Bevel Gear | 1 | |
| 856A3411 | FIXTURE, LOCKING - SPACER, INPUT BEVEL GEAR, TGB (LOCKING FIXTURE) | 1 | |
| 856A3412 | FIXTURE, LOCKING - OIL DISTRIBUTOR, HORIZONTAL BEVEL GEAR, TGB (LOCKING FIXTURE) | 1 | |
| 856A3460 | FIXTURE, CHECKING CENTER VENT TUBE INNER SUPPORTS | 1 | |
| 856A3460G01 | Checking Fixture | 1 | |
| 856A3460G02 | FIXTURE, CHECKING CENTER VENT TUBE INNER SUPPORTS | 1 | |
| 856A3460G03 | FIXTURE, CHECKING CENTER VENT TUBE INNER SUPPORTS | 1 | |
| 856A3460G04 | Fixture Check CV Tube InnerSupports | 1 | |
| 856A3460G05 | Fixture Checking | 1 | |
| 856A3460G06 | FIXTURE, CHECKING CENTER VENT TUBE INNER SUPPORTS | 6 | |
| 856A3460G06 | FIXTURE, CHECKING - CENTER VENT TUBE INNER SUPP. | 6 | |
| 856A3472G01 | AXIAL CHECKING FIXTURE - CVT | 10 | |
| 856A3474G01 | EXPANSION LOAD CHECKING FIXTURE - | 7 | |
| 856A3546 | Fixture, Checking Backlash - TGB Bevel Gear | 1 | |
| 856A3546G01 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G02 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G03 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G04 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G05 | Checking Fixture | 1 | |
| 856A3546G06 | Fixture Check Backlash Duo Bevel Gear TGB | 4 | |
| 856A3546G07 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3552 | FIXTURE LOCKING RADIAL | 1 | |
| 856A3552 G01 | Fixture Locking ‐ Radial Drive Shaft | 7 | |
| 856A3552G01 | Locking Fixture | 7 | |
| 856A3553 G03 | Fixture Locking ‐ Horizontal and Input Bevel Gear | 1 | |
| 856A3553G03 | Locking Fixture | 1 | |
| 856A3553P12 | FIXTURE LOCKING | 1 | |
| 856A3610G01 | Checking Fixture | 4 | |
| 856A3783 | FIXTURE CHECKING, NO 1 & NO 2 BEARING SUPPORT | 1 | |
| 856A3783G01 | Fixture, Check Dim 'V' N1&2 Bearing Support | 1 | |
| 856A3783G02 | FIXTURE - CHECKING D | 6 | |
| 856A3913 | FIXTURE, CHECK ASSEMBLY | 1 | |
| 856A3913G01 | Fixture, Checking - Assembly/TRF with No. 5 Bearing Support | 2 | |
| 856A3913G03 | FIXTURE, CHECK ASSEMBLY | 6 | |
| 856A4051 G02 | Fixture, Functional check HP Comp. Stator Liners | 1 | |
| 856A4051G02 | FIXTURE, FUNCTIONAL CHECK HL | 1 | |
| 856A4065G01 | FIXTURE, THREAD REPAIR -NO. 3 BEARING LOCKNUT | 1 | |
| 856A4071G01 | Fixture Stack/Weld Comb Case | 1 | |
| 856A4094G01 | Back Up Fixture | 1 | |
| 856A4604G01 | FIXTURE, CHECKING - LPT STAGE 1 BLADE NOT ESSENTIAL TO START | 1 | |
| 856A4604G02 | FIXTURE CHECKING LPT STG 1 | 1 | |
| 856A4605G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE | 2 | |
| 856A4606G01 | FIXTURE, CHECKING - LPT STAGE 3 BLADE | 2 | |
| 856A4611 | FIXTURE CHECKING FAN BLADE | 1 | |
| 856A4611G01 | FIXTURE CHECKING FAN BLADE | 1 | |
| 856A4611G02 | FIXTURE CHECKING FAN BLADE | 1 | |
| 856A4615G04 | AIRFLOW CHECKING FIXTURE - LPT | 1 | |
| 856A5505G04 | STAGE 1 LPT BLADE (OLD CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5505G05 | Checking fixture | 1 | |
| 856A5505G06 | STAGE 1 LPT BLADE (NEW CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5505G07 | STAGE 1 LPT BLADE (NEW CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5506G04 | STAGE 2 LPT BLADE (CHECKING FIXTURE) | 1 | |
| 856A5506G05 | Checking Fixture | 1 | |
| 856A5507G04 | CHECKING FIXTURE - LPT BLADES STG 3 | 2 | |
| 856A5507G05 | Checking Fixture | 1 | |
| 856A5508G04 | FIXTURE CHECKING STAGE 4 LPT BLADE | 2 | |
| 856A5508G05 | Checking Fixture | 1 | |
| 856A5508G06 | FIXTURE, CHECKING - BLADE STAGE 4 | 1 | |
| 856A5513G05 | GRINDING/CHECKING FIXTURE - | 2 | |
| 856A5513G06 | FIXTURE GRIND OR CHECK CONCAVE SIDE LPT BLADE STAGE 1 | 4 | |
| 856A5515G01 | FIXTURE CHECKING | 1 | |
| 856A5515G05 | CHECKING FIXTURE | 1 | |
| 856A5517G01 | FIXTURE CHECKING | 1 | |
| 856A5517G06 | CHECKING FIXTURE | 1 | |
| 856A5519G01 | FIXTURE CHECKING | 1 | |
| 856A5519G03 | CHECKING FIXTURE | 1 | |
| 856A5522G02 | CHECKING FIXTURE | 1 | |
| 856A5556G01 | STAGE 1-4 LPT BLADE TWIST ANGLE CHECK (CONF.2 AND 3) (HOLDING FIXTURE) | 1 | |
| 856A5556G02 | FIXTURE HOLDING TWIST ANGLE CHECK LPT BLADES STAGE 1-4 | 3 | |
| 856A5562 | FIXTURE, BUCKLING CHECK - LPT BLADES STAGES 1-4 | 1 | |
| 856A5562G02 | FIXTURE BUCKLING CHECK-LPT STG 1-4 | 3 | |
| 856A5655 G01 | Checking Fixture tilt angle to Stage 2 Outer | 3 | |
| 856A5655G01 | Fixture Check Tilt Angle | 3 | |
| 856A5656 G01 | Checking Fixture tilt angle to Stage 3 Outer | 2 | |
| 856A5656G01 | Fixture Check Tilt Angle | 2 | |
| 856A5749G01 | CHECKING FIXTURE - LPT NOZZLE STG 2 | 1 | |
| 856A5749G02 | CHECKING FIXTURE - LPT NOZZLE STG 2 | 1 | |
| 856A5750G01 | CHECKING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5750G02 | CHECKING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5751G01 | CHECKING FIXTURE - LPT NOZZLE STG 4 | 1 | |
| 856A5752G01 | CHECKING FIXTURE - LPT NOZZLE STG 5 | 1 | |
| 856A5754G01 | CHECKING FIXTURE | 1 | |
| 856A5755G01 | CHECKING FIXTURE | 1 | |
| 856A5795G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5795G02 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5796G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5797G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5802G01 | SEGMENT CHECKING FIXTURE - LPT | 1 | |
| 856A5904G01 | DIM INSP CHECKING FIXTURE - LPT | 1 | |
| 856A5905G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE (CHECKING FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A5905G03 | DIM INSP CHECKING FIXTURE - LPT | 1 | |
| 856A5906G01 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A5907G01 | DIM INSP CHECKING FIXTURE - LPT | 1 | |
| 856A5911G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A6617 | FIXTURE, CHECKING - 25 DEG. & 37 DEG. ANGLED MIDSPAN SHROU | 1 | |
| 856A6617 REV D | FIXTURE, CHECKING - 25 DEG. & 37 DEG. ANGLED MIDSPAN SHROU | 1 | |
| 856A6617G06 | CHECKING FIXTURE | 1 | |
| 856A6705G01 | CHECKING FIXTURE - LPT BLADE STG 1 | 1 | |
| 856A6706G01 | CHECKING FIXTURE - LPT BLADE STG 2 | 1 | |
| 856A6707G01 | CHECKING FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A6708G01 | CHECKING FIXTURE - LPT BLADE STG 4 | 1 | |
| 856A6772G02 | FIXTURE CHECKING MACHINING | 1 | |
| 856A6776G01 | Fixture, Checking/Machining | 1 | |
| 856A6776G02 | Fixture checking machining outer stationary air seal lpt stg1 | 1 | |
| 856A6778G01 | Fixture, Checking/Machining | 1 | |
| 856A6780G01 | Fixture, Checking/Machining | 1 | |
| 856A6782G01 | Fixture, Checking/Machining | 1 | |
| 856A6794G01 | Holding Fixture-Lpt Stg 1 Outer Shroud Brazing Lock | 1 | |
| 856A6795G01 | Tool Set Holding Fixture-Lpt Stg 2 Outer Shroud Edm And Brazing Lock | 1 | |
| 856A6796G01 | Tool Set Holding Fixture-Lpt Stg 3 Outer Shroud Edm And Brazing Lock | 1 | |
| 856A6797G01 | Tool Set Holding Fixture-Lpt Stg 4 Outer Shroud Edm And Brazing Lock | 1 | |
| 8C2125 | FIXTURE, REMOVAL - ROTOR BLADE LOCKING LUGS NON FETT | 1 | |
| 8C2181 | FIXTURE, GAUGING – HPC VSV TURNBUCKLE | 1 | |
| 8C2181G01 | Fixture，gauging-turnbuckle，variable stator vane，hpc | 1 | |
| 8C2415G02 | Fixture Install-Fwd Retainer&Lock Plate | 1 | |
| 8C2435 | FIXTURE, BUMPER BLOCKS, LPT MODULE | 1 | |
| 8C2565 | FIXTURE, LOCKING - TGB | 1 | |
| 8C2565G01 | Fixture,lock-hp compressor rotor | 1 | |
| 8C2672 | FIXTURE, LEAK CHECK - DRAIN MAST | 1 | |
| 8C2672G02 | Fixture,leak check-drain mast | 1 | |
| 8C2738 | FIXTURE, LIFT & TURN - CORE (STRONGBACK) | 1 | |
| 8C2913G02 | Fixture,seating,check-No.2 bearing | 1 | |
| 8C3158 | FIXTURE - CHECK - C-CLIP ASSY | 1 | |
| 8C3210G01 | Fixture, retention, trf wear brackets | 1 | |
| 8C3280G01 | Fixture，flow check-piston ring | 1 | |
| 8C3548G01 | fixture lock shaft tgbx horizontal | 1 | |
| 8C3644 | FIXTURE - LOCK - SHAFT - IGBX - VERTICAL | 1 | |
| 8C3644G01 | Fixture, lock, shaft - igbx, vertical | 1 | |
| 8C4118 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 903J801-1 | ROTOR CHECKING FIXTURE | 1 | |
| 9106A0006-BTF | BLOCK TEST FIXTURE | 1 | |
| 916940-1 | LEAK CHECK FIXTURE | 1 | |
| 918540-1-1 | BLOCKING FIXTURE | 1 | |
| 918664-1-1 | BLOCKING FIXTURE | 1 | |
| 9221 | RAT BACKLASH FIXTURE TOOL | 1 | |
| 919378 | LEAK CHECK TEST FIXTURE | 1 | |
| 919379 | LEAK CHECK TEST FIXTURE | 1 | |
| 940A684 | CHECK FIXTURE SPREADER ARM TOOL | 1 | |
| 9429M53 | FIXTURE GAUGING-TURNBUCKLE - VAR STTR VANE ACTR SYS | 1 | |
| 9429M53G02 | Fixture Gauging-Turnbuckle Var Sttr Vane Actr Sys | 1 | |
| 9441M33 | FIXTURE, BACKLASH CHECKING | 1 | |
| 9441M33 REV B | FIXTURE, BACKLASH CHECKING | 1 | |
| 9441M34 | FIXTURE-BACKLASH CHK. RADIAL BEVEL GEAR | 1 | |
| 9441M34 REV E | FIXTURE-BACKLASH CHK. RADIAL BEVEL GEAR | 1 | |
| 9446M53 | FIXTURE SUPPORT BRACKETS - LPT MODULE | 1 | |
| 9446M53G01 | Fixture-support brackets,lpt module | 1 | |
| 9446M55G02 | FIXTURE, ROTOR LOCK ANTI-ROTATE | 1 | |
| 9461M18G02 | FIXTURE PRESSURE CHECK | 1 | |
| 9461M30G02 | Fixture Backlash Check | 1 | |
| 9480M04 | FIXTURE, BACKLASH - TRANSFER GEARBOX | 1 | |
| 9480M58G02 | Fixture, Backlashtransfer Gearbox | 1 | |
| 9480M78G01 | FIXTURE, BACKLASH – HORIZONTAL & RADIAL BEVEL GEARS, INLET GEARBOX | 1 | |
| 9480M78G02 | FIXTURE BACKLASH | 1 | |
| 9486M50G01 | Fixture,backlash | 1 | |
| 9489M53G01 | Locking nut fixture | 1 | |
| 956A1226G03 | Fixture，rotor lock-AFT HPT rotor | 1 | |
| 956A1315 | FIXTURE - SEATING CHECK - CORE MODULE TO INLET GEAR BOX | 1 | |
| 956A1315G01 | Fixture,seating check-core module to inlet gear box | 1 | |
| 956A1317 | FIXTURE - BRACKET - LIFT AND TURN | 1 | |
| 956A1323 | FIXTURE - SETMASTER/TEST - DROP CHECK TOOL | 1 | |
| 956A1323G01 | Fixture,setmaster/test-drop check tool | 1 | |
| 956A1326 | FIXTURE - BRACKET - LIFT AND TURN | 1 | |
| 956A1511 | FIXTURE - TORQUE - LOCKNUT - 3B BEARING | 1 | |
| 956A1511G01 | Fixture,torque-locknut,3b,bearing | 1 | |
| 956A1523 | FIXTURE - TORQUE - LOCKNUT - RADIAL BEVEL GEAR | 1 | |
| 956A1523G02 | Fixture,torque-locknut,radial bevel gear | 1 | |
| 956A1527 | FIXTURE - ASSEMBLY - LOCKNUT - IGB | 1 | |
| 956A1527G01 | fixture assembly locknut igb leap 1a | 1 | |
| 956A1527G02 | Fixture assembly locknut igb leap 1a | 1 | |
| 956A1536 | FIXTURE - REMOVE - RETAINING PINS - HPC LOCKNUT | 1 | |
| 956A1536G01 | Fixture, Install And Remove - Retaining Pins Hpc Lock Nut | 1 | |
| 956A1536G02 | Fixture, Install And Remove - Retaining Pins Hpc Lock Nut | 1 | |
| 956A2306 | FIXTURE - BRACKET - LIFT AND TURN | 1 | |
| 956A3089 | FIXTURE - LEAKAGE CHECK - C SUMP | 1 | |
| 956A3089G01 | fixture leakage check c sump | 1 | |
| 956A3089G02 | fixture leakage check c sump | 1 | |
| 956A3089G03 | fixture leakage check c sump | 1 | |
| 956A3089G04 | Fixture leakage check c sump | 1 | |
| 956A3089G05 | Fixture leakage check c sump | 1 | |
| 956A3089G06 | Fixture leakage check c sump | 1 | |
| 956A3132G01 | Fixture remove-rotor blade locking lugs | 1 | |
| 956A3173 | FIXTURE - GAUGING - HPC VSV TURNBUCKLE | 1 | |
| 956A3173G02 | VARIABLE STATOR VANE HIGH PRESSURE COMPRESSOR (HPC) TURNBUCKLE GAUGING FIXTURE | 1 | |
| 956A3173G03 | Fixture,gauging-turnbuckle,variable stator vane,hpc | 1 | |
| 956A3306 | FIXTURE - BRACKET LIFT AND TURN - COMP AFT | 1 | |
| 956A3306G02 | Fixture bracket lift and turn comp aft | 1 | |
| 956A3323 | FIXTURE - CALIBRATION - DROP CHECK TOOL | 1 | |
| 956A3323G01 | Fixture,setmaster/test-drop check tool | 1 | |
| 956A3323G02 | Fixture,setmaster/test-drop check tool | 1 | |
| 956A3531 | FIXTURE - TORQUE - LOCKNUT - 3B BRG | 1 | |
| 956A3531G02 | Fixture,torque-locknut.3B bearing | 1 | |
| 956A3542 | FIXTURE - ASSEMBLY - LOCKNUT - IGB | 1 | |
| 956A3542G02 | Fixture, Assembly- Locknut, Igb | 1 | |
| 956A3549 | PATTERN BACKLASH FIXTURE | 1 | |
| 956A3564G02 | Fixture,install and remove-retaining pins hpc lock nut | 1 | |
| 956A3564G03 | Fixture,install and remove-retaining pins hpc lock nut | 1 | |
| 956A3624 | FIXTURE - LEAK CHECK | 1 | |
| 956A3624G01 | Fixture, Leak Check | 3 | |
| 956A6023 | FIXTURE - CLEARANCE CHECK - SENSOR N1 | 1 | |
| 956A6023G02 | Fixture clearance check sensor n1 | 1 | |
| 956A6023G03 | Fixture clearance check sensor n1 | 1 | |
| 956A6032 | FIXTURE - CHECK ALIGNMENT - NUT - FAN & BOOSTER | 1 | |
| 956A6032G02 | Fixture,check alignment-nut,fan&booster | 1 | |
| 956A6034 | FIXTURE - CHECK - NIPPLE LOCATION - BEARING # 2 | 1 | |
| 956A6045G01 | Fixture,packing and control-booster shaft outillage de mise en position rotor sur chariot | 1 | |
| 956A6049 | FIXTURE -CHECK LOCATION-SYSTEM ANTI ICING -FAIRING FLOW PATH | 1 | |
| 956A6049G01 | Fixture Check Location-System Anti Icing, Fairing Flow Path | 1 | |
| 956A6058 | FIXTURE - BACKLASH CHECK - ABRADABLE SEAL | 1 | |
| 956A6058G01 | Fixture,backlash check-abradable seal | 1 | |
| 956A6058G03 | Fixture,backlash check-abradable seal | 1 | |
| 956A6061 | FIXTURE - ROTATION LOCK & DRIVE - FAN BLADE DISK | 1 | |
| 956A6086 | FIXTURE - DIMENSION CHECK - FAN HUB | 1 | |
| 956A6086G02 | Fixture,dimension check-fan hub | 1 | |
| 956A6129 | FIXTURE - REMOVE - BLANK OFF - ARM 8 O'CLOCK | 1 | |
| 956A6129G02 | Fixture, Instaluremove ·Blank Off, Arm 8 O'Clock | 1 | |
| 956A6138 | FIXTURE - GUIDE PIN - ARM 8 O'CLOCK & FAN SHROUD | 1 | |
| 956A6138G02 | Fixture, guide pin - arm 8 O'clock & fan shroud | 1 | |
| 956A6155 | FIXTURE - ASSEMBLY - BELLCRANCK ACTUATING - VBV | 1 | |
| 956A6155G02 | Fixture,assembly-bellcranck actuating vbv | 1 | |
| 956A6159G01 | Fixture locate brackets b2 flange shroud fan frame | 1 | |
| 956A6161 | FIXTURE - INSTALL & CHECK - VBV DOOR | 1 | |
| 956A6217 | FIXTURE - LOCKING - BEVEL GEAR | 1 | |
| 956A6221 | FIXTURE - LOCKING - BEVEL GEAR | 1 | |
| 956A6229 | FIXTURE - LOCKING - BEVEL GEAR | 1 | |
| 956A6237 | RIGGING FIXTURE - BACKLASH | 1 | |
| 956A6237G01 | Rigging fixture-backlash chariot couple conique | 1 | |
| 956A6238 | FIXTURE- BACKLASH | 1 | |
| 956A6260 | FIXTURE - LOCKING - SPUR GEAR | 1 | |
| 956A6305G01 | Fixture, Lift - Lpt Shaft,Backward | 1 | |
| 956A6321 | FIXTURE - STRONGBACK - LPT | 1 | |
| 956A6321G02 | Fixture,strongback-lpt assy | 1 | |
| 956A6321G03 | Fixture,strongback-lpt assy | 1 | |
| 956A6321G04 | FIXTURE, STRONGBACK | 1 | |
| 956A6337G01 | FIXTURE, ASSEMBLY - LOCKING RING | 1 | |
| 956A6460 | FIXTURE - DIMENSION CHECK - LPT | 1 | |
| 956A6460G01 | Fixture,dimension check-lpt | 1 | |
| 956A6541 | FIXTURE - TORQUING - LOCKING NUT BEARING 5 | 1 | |
| 956A6541G01 | Fixture, Torquing-Locking Nut Bearing 5 | 1 | |
| 956A6541G02 | Fixture, Torquing-Locking Nut Bearing 5 | 1 | |
| 956A6541G03 | Fixture, Torquing-Locking Nut Bearing 5 | 1 | |
| 956A6545 | FIXTURE - CLEARANCE CHECK - LPT BLADES STAGE 7 | 1 | |
| 956A6545G01 | Fixture Clearance Check-Lpt | 1 | |
| 956A6617 | FIXTURE, FLOW CHECK - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6617G04 | Fixture,flow check-carbon seal | 1 | |
| 956A6637 | FIXTURE - ASSEMBLY - LOCKING RING | 1 | |
| 956A6637G01 | FIXTURE, ASSEMBLY - LOCKING RING | 2 | |
| 956A6637G02 | FIXTURE, ASSEMBLY - LOCKING RING | 3 | |
| 956A6646G01 | Fixture dimension check-laby M10 | 1 | |
| 956A6667G01 | Fixture,flow check-carbon seal | 1 | |
| 956A6854 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 956A7006 | FIXTURE, CHECK - VARIABLE BLEED VALVE | 1 | |
| 956A7006G02 | Fixture check variable bleed valve | 1 | |
| 956A8025 | FIXTURE - CHECK - NOZZLE - OIL BEARING 2 | 1 | |
| 956A8025G01 | Fixture，check-nozzle,oil bearing 2 | 1 | |
| 956A8084 | FIXTURE - CHECK - ABRADABLE STRIP - RUN OUT | 1 | |
| 956A8084G01 | Fixture,check-abradable strip,run out | 1 | |
| 956A8084G02 | Fixture,check-abradable strip,run out | 1 | |
| 956A8121G01 | Fixture,lock-igv ring outillage de blocage anneau igv | 1 | |
| 956A8125 | FIXTURE - LOCK - IGV RING | 1 | |
| 956A8149 | FIXTURE - CHECK - VARIABLE BLEED VALVE | 1 | |
| 956A8149G02 | Fixture，check-variable bleed valve | 1 | |
| 956A8156 | FIXTURE - CHECK - IGV ASSEMBLY | 1 | |
| 956A8156G01 | Fixture，check-IGV assembly | 1 | |
| 956A8158 | FIXTURE - ASSY - TORQUING - BELLCRANK & TURNBUCKLE | 1 | |
| 956A8158G01 | Fixture assy torquing bellcrank and turnbuckle | 1 | |
| 956A8335 | FIXTURE - CHECK - LPT ZF DIMENSION | 1 | |
| 956A8476 | FIXTURE - CHECK - BACKLASH | 1 | |
| 956A8477 | FIXTURE - MASTER - ALIGNMENT/CHECK | 1 | |
| 956A8547 | FIXTURE - HOLDING - BRACKETS - OIL DRAIN | 1 | |
| 956A8547G01 | Fixture，holding-brackets，oil drain outillage maintien drain 6H | 1 | |
| 956A8609 | KIT FIXTURE - ASSEMBLY LOCKING RING | 1 | |
| 956A8609G02 | Kit fixture,assembly locking ring | 1 | |
| 956A8633G03 | Fixture,lifting-lpt assy strongrack | 1 | |
| 956A8654 | FIXTURE - STRONGBACK - LPT ASSY | 1 | |
| 956A8854 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 956A8927 | FIXTURE - BACKLASH - BEVEL GEAR - TGB | 1 | |
| 956A8979 | FIXTURE - BACKLASH - BEVEL GEAR -AGB | 1 | |
| 980-7028-001 | OPTICAL TRACK AZIMUTH ALIGNMENT FIXTURE | 1 | |
| 98A27301002001 | TOOL CHECKING FIXTURE | 1 | |
| 98A27303502000 | MEASURING EQUIPMENT,USE TO CHECK FIXTURE | 2 | |
| 98D07103001000 | FIXTURE STRUT THSA/ GLOBAL JACKING SA | 6 | |
| 98D26203002046 | LOCK FIXTURE | 4 | |
| 98D26203002052 | LOCK FIXTURE | 1 | |
| 98D26203002062 | LOCK FIXTURE | 3 | |
| 98D26203002064 | LOCK FIXTURE | 3 | |
| 98D27403003000 | CHECKING TOOL-BALL SCREW AND TIE BAR FIXTURE STRUT THSA | 13 | |
| 98D27403003102 | CLEVIS ASSY (UPPPER FITTING) BALL LOCK PINFIXTURE STRUT THSA | 1 | |
| 98D32104010000 | MLG TROLLY FIXTURE BRACKET >4 STAY | 25 | |
| 99A34201003000 | FIXTURE - POSITIONING, ANGLE-OF-ATTACK SENSOR | 1 | |
| 9C1083 | FIXTURE, STRONGBACK | 1 | |
| 9C1132G04 | FIXTURE - INSTALLATION/REMOVAL, LRU, JACK | 1 | |
| 9C1132G05 | FIXTURE - INSTALLATION/REMOVAL, LRU, JACK | 2 | |
| 9C1132G06 | FIXTURE LRUS JACK R/I | 4 | |
| 9C1443 | FIXTURE, RESTRAINING-LPT INNER AND OUTER LOCK RINGS | 1 | |
| 9C1458G01 | Fixture，rotor lock-hpc rotor | 1 | |
| 9C2397 | CHECKING FIXTURE-HPCR BLISK 1 | 1 | |
| 9C2397G04 | CHECKING FIXTURE - HPCR BLISK 1 | 1 | |
| 9C2414G02 | Centering checking fixture-hpcs shroud stage 5 | 1 | |
| 9C3152 | FIXTURE, GAUGING TURNBUCKLE, VBV ACTR SYS | 1 | |
| 9C3184 | FIXTURE, LEAK CHECK - AGB CIRCUTS | 1 | |
| 9C3184G01 | FIXTURE - LEAK CHECK | 4 | |
| 9C3185 | FIXTURE- LEAK CHECK | 1 | |
| 9C3309 | FIXTURE, STRONGBACK, LIFT, TURN & RESTRAIN- LP TURBINE MODULE | 1 | |
| 9C3309P28 | Fixture,Strongback,Lift,Turn& Restrain-Lp Turnine ,Module | 1 | |
| 9MIT65B01211 | ASSEMBLY FIXTURE - SHOCK STRUT, WING LANDING GEAR, BODY LANDING GEAR AND NOSE LANDING GEAR | 2 | |
| A-31981 | TORQUE CHECK FIXTURE | 1 | |
| A18354 | CHECKING FIXTURE (2 ITEMS) | 1 | |
| A22004-1 | Checking Fixture - Autothrottle Gearbox | 5 | |
| A27028-11 | CHECKING FIXTURE - LOAD LIMITER SPRING, AILERON CONTROL | 3 | |
| A27048-1 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-2 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-3 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-40 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27049-1 | CHECK FIXTURE - LEADING EDGE SLAT ANGLE GEARBOX BACKLASH | 1 | |
| A27055-1 | FIXTURE - TRAILING EDGE FLAP DRIVE WORM GEAR SHIM THICKNESS | 1 | |
| A27070-24 | TEST FIXTURE BACKLASH (2IT) | 1 | |
| A27070-62 | TEST FIXTURE-BACK SPLASH/TOOL ASSY | 1 | |
| A27125-17 | Check Fixture | 8 | |
| A27127-1 | Checking Fixture -Input Rod Assembly. Elevator Pcu | 3 | |
| A27127-1 | Checking fixture (3IT) | 3 | |
| A27127-2 | CHECKING FIXTURE ASSY | 1 | |
| A27127-29 | CHECKING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR PCU | 8 | |
| A27127-30 | CHECKING FIXTURE ASSY | 1 | |
| A28004-1 | CHECK FIXTURE - SURGE TANK PRESSURE RELIEF VALVE | 4 | |
| A32012-24 | TEST FIXTURE- ANGLE OF ATTACK | 1 | |
| A32058-1 | HOLDING FIXTURE - ACTUATOR LOCK, NOSE LANDING GEAR (NLG) | 1 | |
| A32063-7 | TEST FIXTURE - SIDE AND DRAG BRACE LOCK ACTUATOR, MAIN LANDING GEAR (MLG) | 1 | |
| A32064-1 | FIXTURE - TEST, MAIN LANDING GEAR (MLG) DOOR ARMING LOCKOUT ACTUATOR | 1 | |
| A32084-1 | HOLDING FIXTURE - PISTON ROD, NOSE LANDING GEAR (NLG) LOCK ACTUATOR | 1 | |
| A34012 | TEST FIXTURE - ANGLE OF ATTACK | 1 | |
| A34012 -24 | TEST FIXTURE - ANGLE OF ATTACK | 10 | |
| A34012 REV C | TEST FIXTURE - ANGLE OF ATTACK | 1 | |
| A34012-1 | TEST FIXTURE - ANGLE OF ATTACK (AOA) | 1 | |
| A34012-19 | Test Fixture - Angle Of Attack | 7 | |
| A34012-24 | Test Fixture - Angle Of Attack | 10 | |
| A3401219 | FIXTURE, CALIB.ANGLE OF ATTACK TEST | 7 | |
| A340412-19 | FIXTURE- TEST, ANGLE OF ATTACK SENSOR | 1 | |
| A78010-1 | CHECK FIXTURE - SPRING INTERLOCK BELLCRANK, JT9D | 1 | |
| AA1522 | Fixture, Alignment Brake Heat Packs | 1 | |
| AB27001-Y2I | CLEVIS ASSY (UPPPER FITTING) BALL LOCK PINFIXTURE STRUT THSA | 1 | |
| AB27001-Y2J | BUSH OF HYDRAULIC SYSTEM (LOW. FITTING) LOCK PINFIXTURE STRUT THSA | 1 | |
| AC21821000 | OPERATION CHECKING FIXTURE | 1 | |
| AC21869000 | FIXTURE TOOL (for the back-up rings on the piston) | 8 | |
| AC21890000 | FIXTURE -0 TEST BLOCK | 4 | |
| AGE 13852 | CHECKING FIXTURE | 1 | |
| AGE-01410-401 | FIXTURE SET, BACKLASH MEASUREMENT | 8 | |
| AGE-01623-401 | GSE FIXTURE, BACKLASH MEASUREMENT | 1 | |
| AGE-01885-401 | FIXTURE, BACKLASH MEASUREMENT | 1 | |
| AGE-04267-401 | FIXTURE,BACKLASH MEASUREMENT, ELEV/ | 6 | |
| AGE13593 | PRESSURE LEAK CHECK FIXTURE | 2 | |
| AGE13852 | CHECKING FIXTURE | 1 | |
| AGE13868 | BACKLASH FIXTURE | 1 | |
| AGE14891 | FIXTURE, V-BLOCK | 1 | |
| AGE14963 | ASSEMBLY, TEST FIXTURE, VALVE, CHECK – 7.0 IN | 1 | |
| AGE15534 | FIXTURE, SWITCH LOCATION ON BRACKET | 1 | |
| AGE15634 | Rotor Balance Assembly Fixture Head Support (Schenck) | 1 | |
| AGE15897 | JAM BLOCK FIXTURE ASSEMBLY | 1 | |
| AGE18801 | LOCK PISTON SPRING FIXTURE | 1 | |
| AGE70776 | BLADE LOCK BENDING FIXTURE | 1 | |
| AP-BEE270-15 | TRIM TAB FREEPLAY CHECK FIXTURE | 1 | |
| APKAD-270-1 | TRIM TAB FREEPLAY CHECK FIXTURE | 1 | |
| AR024G005 | FIXTURE-CHECKING | 1 | |
| AT55730 | Assembly fixture shock strut to bogie assembly | 1 | |
| AT6516 | BACKLASH SMOOTHNESS FIXTURE | 1 | |
| B27031 | CHECKING FIXTURE -0 POGO ROD ASSY, ELEVATOR | 1 | |
| B27031-1 | CHECKING FIXTURE | 1 | |
| B27031-16 | CHECKING FIXTURE - ELEVATOR POGO ROD ASSEMBLY | 3 | |
| B32026 | FIXTURE -0 STAKING, ACTUATOR, NLG LOCK | 1 | |
| B32026-1 | FIXTURE - STAKING, ACTUATOR, NOSE LANDING GEAR LOCK | 3 | |
| B32030 | FIXTURE -0 LOCK ACTUATOR, OVERHAUL EQPT, NLG | 1 | |
| B32030-1 | FIXTURE - LOCK ACTUATOR, OVERHAUL EQUIPMENT, NOSE LANDING GEAR (NLG) | 3 | |
| B32041 | TEST FIXTURE -0 TRUCK POSITION ACTUATOR, MLG | 1 | |
| B32041-1 | TEST FIXTURE - TRUCK POSITION ACTUATOR, MAIN LANDING GEAR | 2 | |
| B32065 | TEST FIXTURE -0 MAIN LANDING GEAR DOWNLOCK | 1 | |
| B32065-1 | TEST FIXTURE - MAIN LANDING GEAR DOWNLOCK ACTUATOR | 1 | |
| B34012 | TEST FIXTURE - ANGLE OF ATTACK | 1 | |
| B34012 REV C | TEST FIXTURE - ANGLE OF ATTACK | 1 | |
| B52010 | FIXTURE -0 BACKLASH, NO.1/2 DOOR MANUAL DRIVE | 1 | |
| B52010-1 | FIXTURE - BACKLASH, NUMBER 1 & 2 DOOR MANUAL DRIVE GEARBOX ASSEMBLY | 1 | |
| B56001-74 | CHECK FIXTURE - NO. 2 WINDOW | 1 | |
| B78008-19 | TEST FIXTURE - ROD END AND STROKE STOP, LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR | 12 | |
| B78011-1 | Torque Fixture - Locking and Non-Locking Thrust Reverser Actuator | 1 | |
| B78011-25 | TORQUE FIXTURE - LOCKING AND NON-LOCKING THRUST REVERSER ACTUATOR ASSEMBLY | 9 | |
| B78014-1 | Test Fixture - Locking and Non-Locking Thrust Reverser Actuator | 1 | |
| B78014-29 | Test Fixture - Rod End and Stroke Stop, Locking and Non-locking Thrust Reverser Actuator | 4 | |
| B78014-37 | Test Fixture - Rod End and Stroke Stop, Locking and Non-locking Thrust Reverser Actuator | 8 | |
| BL47481 | LOCKING FIXTURE CLEVIS | 1 | |
| BLMG-3 | MANDREL CHECK FIXTURE | 1 | |
| BLMG-4 | MANDREL CHECK FIXTURE | 1 | |
| BLMG-5 | MANDREL CHECK FIXTURE | 1 | |
| C0M1644 | FIXTURE - TRACK SETTING | 1 | |
| C107-08-0077 | BACKFLUSH FIXTURE, MAIN | 1 | |
| C16623-1 | GIRT SUPPORT PACKING FIXTURE | 1 | |
| C27088-1 | Test Fixture - Hypoid Gear Backlash | 1 | |
| C28005-29 | Check Fixture Equ Pressure Relief Valve | 1 | |
| C32076-1 | DISASSEMBLY/ASSEMBLY FIXTURE - SHOCK STRUT, MAIN LANDING GEAR | 1 | |
| C52009-1 | Lifting Fixture Equipment - Main Deck Cargo Door | 5 | |
| C52009-2 | Lifting Fixture Equipment - Main Deck Cargo Door | 3 | |
| C78027-1 | Torque Fixture - Locking and Non-Locking Thrust Reverser Actuator Assembly | 4 | |
| CA21038K-100 | CHECKING FIXTURE - ELEVATOR POGO ROD ASSEMBLY | 1 | |
| CAMG-33 | MANDREL CHECK FIXTURE | 1 | |
| CAMG-43 | MANDREL CHECK FIXTURE | 1 | |
| CBMG-10-0-N | MANDREL CHECK FIXTURE | 4 | |
| CBMG-10-2-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-10-3-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-12-0-N | FIXTURE MANDREL CHECK | 2 | |
| CBMG-12-1-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-12-2-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-12-3-N | FIXTURE GAGE MANDREL CHECK | 3 | |
| CBMG-14-0-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-16-0-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-16-1-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-16-2-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-16-3-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-18-0-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-18-1-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-4-0-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-4-1-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-4-2-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-4-3-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-4-4-N | MANDREL CHECK FIXTURE | 3 | |
| CBMG-6-0-N | MANDREL CHECK FIXTURE | 3 | |
| CBMG-6-1-N | MANDREL CHECK FIXTURE | 4 | |
| CBMG-6-2-N | MANDREL CHECK FIXTURE | 4 | |
| CBMG-6-3-N | MANDREL CHECK FIXTURE | 3 | |
| CBMG-8-0-N | MANDREL CHECK FIXTURE | 5 | |
| CBMG-8-1-N | MANDREL CHECK FIXTURE | 6 | |
| CBMG-8-2-N | MANDREL CHECK FIXTURE | 4 | |
| CBMG-8-3-N | MANDREL CHECK FIXTURE | 6 | |
| CBMG102S | FIXTURE MANDREL CHECK | 1 | |
| CBMG12-0N | FIXTURE MANDREL CHECK | 2 | |
| CBMG12-1N | MANDREL CHECK FIXTURE | 2 | |
| CBMG12-2N | MANDREL CHECK FIXTURE | 2 | |
| CBMG123N | FIXTURE GAGE MANDREL CHECK | 3 | |
| CBMG4-0N | FIXTURE, MANDREL CHECK | 1 | |
| CBMG4-3N | MANDREL CHECK FIXTURE | 1 | |
| CBMG60S | FIXTURE MANDREL CHECK | 1 | |
| CBMG62S | FIXTURE MANDREL CHECK | 1 | |
| CBMG80S | FIXTURE MANDREL CHECK | 1 | |
| CBMG82S | FIXTURE MANDREL CHECK | 1 | |
| CBMG−12−0−N | MANDREL CHECK FIXTURE | 2 | |
| CBSG-12-0-N-1 | MANDREL CHECK FIXTURE | 1 | |
| CF314U2100-28 | CHECKING FIXTURE | 1 | |
| CF65B40907 | CHECK FIXTURE - PRESSURE RELIEF VALVE ASSEMBLY, AIR CONDITIONING | 1 | |
| CF65B57391 | CHECKING FIXTURE - ESCAPE SLIDE/RAFT | 1 | |
| CF65B57652 | LINKAGE CHECK FIXTURE - UPPER DECK SLIDE | 1 | |
| CF65B61160 | CHECKING FIXTURE - CARGO BAGGAGE RETRACTABLE GUIDE RAIL INSTALLATION | 1 | |
| CF65B62206-9 | CHECKING FIXTURE - CAM FOLLOWER INSTALLATION | 1 | |
| CF65B80562 | CHECKING FIXTURE - BALL SCREW, DRIVE MECHANISM, STABILIZER TRIM | 1 | |
| CF65B80578 | CHECK FIXTURE - QUADRANT LEVER AND BRACKET ASSEMBLY, INBOARD SPOILER | 1 | |
| CF65B80836 | CHECK FIXTURE - SPOILER CONTROL, DIFFERENTIAL MECHANISM | 1 | |
| CF65B80934 | CHECK FIXTURE - OUTBOARD AILERON GEARBOX | 1 | |
| CF65B81117 | CHECKING FIXTURE | 1 | |
| CF65B81126 | CHECK FIXTURE - OUTBOARD TRANSMISSION ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81127 | CHECK FIXTURE - INBOARD TRANSMISSION ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81128 | CHECK FIXTURE - OUTBOARD TRANSMISSION ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81129 | CHECKING FIXTURE - INBOARD TRANSMISSION ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B82106 | SPRING CHECKING FIXTURE - LOAD LIMITER ASSEMBLY, AILERON CONTROL | 1 | |
| CF65B82986 | CHECK FIXTURE - BACKLASH CF65B82986 GEARBOX ASSEMBLY, INBOARD LEADING EDGE FLAP DRIVE | 1 | |
| CF65B83864 | CHECKING FIXTURE - ANGLE GEARBOX, TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B94508 | CHECKING FIXTURE - BLEED DUCT, CF6-50 INTERFACE FLANGES | 1 | |
| CF9-217500-01 | Check Fixture | 1 | |
| CF9-217541-01 | Check Fixture | 1 | |
| CHA1001-048 | BACKLASH CHECKING FIXTURE | 1 | |
| CHA1001-053 | BACKLASH CHECKING FIXTURE | 1 | |
| CHA1057-323 | TORQUE LIMITER CHECKING FIXTURE | 1 | |
| CHA1062-043 | ENDFLOAT CHECKING FIXTURE | 1 | |
| CHA696-061 | CHECKING FIXTURE | 1 | |
| CHA704-599 | BACKLASH CHECKING FIXTURE | 1 | |
| CHA723-1078 | CHECKING FIXTURE | 1 | |
| CHA723-412 | CHECKING FIXTURE | 1 | |
| CJ5616-6E | SHOCK STRUT ASSEMBLY FIXTURE | 1 | |
| CJMD 127-002 | RUDDER CHECK FIXTURE | 1 | |
| CJMD127-002 | RUDDER CHECK FIXTURE | 1 | |
| CJMD127-003 | ELEVATOR TRIM TAB CHECK FIXTURE | 1 | |
| CJMD127-004 | CHECK FIXTURE (LEFT AILERON) | 1 | |
| CJMD127-005 | CHECK FIXTURE (RIGHT AILERON) | 1 | |
| CJMD227-004 | LEFT AILERON TRIM TAB CHECK FIXTURE (SPECIAL ORDER NOT STOCKED) | 1 | |
| CJMD227-005 | RIGHT AILERON TRIM TAB CHECK FIXTURE (SPECIAL ORDER NOT STOCKED) | 1 | |
| CJMD327-106 | ELEVATOR CHECK FIXTURE | 2 | |
| CJMD327-107 | RUDDER CHECK FIXTURE | 2 | |
| CJMD327-108 | RUDDER TRIM TAB CHECK FIXTURE | 2 | |
| CJMD527-101 | RUDDER AND RUDDER TRIM TAB CHECK FIXTURE | 3 | |
| CJMD527-102 | ELEVATOR AND ELEVATOR TRIM TAB CHECK FIXTURE (SPECIAL ORDER NOT STOCKED) | 1 | |
| CJMD827-001 | RUDDERCHECK FIXTURE FAB | 2 | |
| CJMD827-002 | AILERON ELEVATOR AND RUDDER TRIM FREE PLAY CHECK FIXTURE FAB | 2 | |
| CJMD827-003 | RUDDER TAB CHECK FIXTURE FAB | 2 | |
| CJMD8A27-001 | RUDDER CHECK FIXTURE | 2 | |
| CJMD8B27-001 | CHECK FIXTURE-RUDDER | 2 | |
| CJMDE27-001 | RUDDER AND RUDDER TRIM TAB CHECK FIXTURE 560-0539 THRU 5000 | 1 | |
| CJMDL247-002 | ELEVATOR AND ELEVATOR TRIM TAB CHECK FIXTURE 560-0539 THRU 5000 | 1 | |
| CJMDL27-002 | CHECK FIXTURE TOOL,LH ELEV | 2 | |
| CJMDL27-006 | CHECK FIXTURE TOOL, RH ELEV | 2 | |
| CJMDL27-007 | RUDDER AND RUDDER TRIM TAB KIT CHECK FIXTURE | 2 | |
| CJMDL27-008 | RUDDER DEFLECTION CHECK FIXTURE | 1 | |
| CJMDL27-101 | RUDDER AND RUDDER TRIM TAB KIT CHECK FIXTURE | 1 | |
| CJMDM27-001 | RUDDER CHECK FIXTURE | 1 | |
| CJMDS27-001 | CHECK FIXTURE - RUDDER | 1 | |
| CJMDS27-002 | CHECK FIXTURE - LH ELEVATOR | 1 | |
| CJMDS27-003 | CHECK FIXTURE - RH ELEVATOR | 1 | |
| CM165 | FUNCTIONAL TEXT FIXTURE BACK PANEL | 1 | |
| CODE 690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| CODE690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| CTR4948-3 | CYCLING FIXTURE, SHOCK STRUT ASSY | 1 | |
| CTR5813-3 | UPLOCK ASSEMBLY TEST FIXTURE | 1 | |
| CTR5866-1 | RESTRAINING FIXTURE, SHOCK STRUT ASSY | 1 | |
| D14089-101 | ADAPTER, VACUUM D14089-101 (WOODEN PACKING FIXTURE) | 4 | |
| D15924-101 | FIT CHECK FIXTURE | 1 | |
| D19736 | PACKING FIXTURE | 1 | |
| D19736-101 | PACKING FIXTURE | 1 | |
| D19761-101 | PACKING FIXTURE | 1 | |
| D19855-101 | PACKING FIXTURE | 1 | |
| D19879-101 | PACKING FIXTURE | 1 | |
| D2887-147B | VALVE CRACKING FIXTURE | 1 | |
| D39034-101 | PACKING FIXTURE WITH BANDING BOARD (L.H. SLIDES) | 1 | |
| D39034-102 | PACKING FIXTURE WITH BANDING BOARD (R.H. SLIDES) | 1 | |
| D46241 | CHECKING FIXTURE | 1 | |
| D46350 | Checking Fixture | 4 | |
| DRT67522 | FIXTURE-CHECKING | 1 | |
| DRT67706 | FIXTURE-CHECKING | 1 | |
| DRT69248 | HANDLING SHOCK STRUT HANDLING FIXTURE | 2 | |
| DZZ7187-1 | CENTER L/G JACKING FIXTURE | 2 | |
| DZZ7187-501 | Fixture-CLG jacking | 1 | |
| E2J60661 | FILING FIXTURE FOR LOCK PLATES 4-6 | 1 | |
| E5112 | LOCKING FIXTURE | 1 | |
| E56789 | BACKLASH FIXTURE | 1 | |
| E73385-001 | BACKLASH FIXTURE | 1 | |
| E74159 | LOCKWIRE FIXTURE | 1 | |
| E74645 | LOCKWIRE FIXTURE | 1 | |
| EAS/B/1206 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| Ex-74973 | Fixture, checking, comp Stator vane angle | 1 | |
| F-1487 | Fixture, Block Pin Setter | 1 | |
| F-1896 | Fixture, Shock Assembly | 1 | |
| F-2446 | Fixture, Shock Assembly | 1 | |
| F-2608 | Fixture, Shock Assembly | 1 | |
| F26803000 | OPERATION CHECKING FIXTURE | 1 | |
| F27053000 | OPERATION CHECKING FIXTURE | 2 | |
| F270530000 | OPERATION CHECKING FIXTURE | 1 | |
| F2MA927522 | SET OF BACKLASH MEASURING FIXTURES | 1 | |
| F2MA927522100 | MEASURING FIXTURE FOR FLAP INTERMEDIATE TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F2MA927522200 | MEASURING FIXTURE FOR FLAP DUAL TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F2MA927522300 | MEASURING FIXTURE FOR FLAP POWER DRIVE UNIT BACKLASH | 1 | |
| F2MA927522400 | MEASURING FIXTURE FOR FLAP ACTUATOR BACKLASH | 1 | |
| F71421 | FIXTURE - END PLAY CHECKING, STABILIZER TRIM ACTUATOR | 1 | |
| F71421-27 | FIXTURE - END PLAY CHECKING, STABILIZER TRIM ACTUATOR | 1 | |
| F71421-500 | Fixture - End Play Checking, Stabilizer Trim Actuator | 1 | |
| F71421-501 | Fixture - End Play Checking, Stabilizer Trim Actuator | 6 | |
| F72729-20 | ELEVATOR LOCK FIXTURE | 1 | |
| F72786-101 | FIXTURE-TEST,ANGLE OF ATTACK SENSOR | 5 | |
| F72786-181 | FIXTURE - TEST, ANGLE OF ATTACK SENSOR, CONRAC AOA'S | 11 | |
| F72790 | LOCKING FIXTURE TOOL | 25 | |
| F72828 | ALIGNMENT FIXTURE -0 THRUST REVERSER TO CHECK | 1 | |
| F73004 | TEST FIXTURE-CARGO LOADING TAIL JACK | 1 | |
| F80-0-3045 | CHECK FIXTURE | 1 | |
| F80166-1 | CHECK FIXTURE EQUIPMENT, PRESSURE RELIEF VALVE | 26 | |
| F80174(-1) | TEST FIXTURE - MAIN LANDING GEAR SHOCK STRUT | 1 | |
| F80174-1 | Test Fixture - Main Landing Gear Shock Strut | 1 | |
| F80174-100 | FIXTURE MLG SHOCK STRUT TEST | 2 | |
| FBS35293 | FIXTURE PRESET FOR EJECTION JACK AY 730820 | 1 | |
| FDS35288 | FIXTURE HOLDING FOR EJECTION JACK AY 730820 | 1 | |
| FDS35292 | FIXTURE HOLDING FOR EJECTION JACK AY 730820 | 1 | |
| FMG-613-30010-A | MANDREL CHECK FIXTURE | 1 | |
| FMM-130-30010-B | MANDREL CHECK FIXTURE | 1 | |
| FTAMG-3-0-3 | MANDREL CHECK FIXTURE | 1 | |
| FTMG-3-0-3 | MANDREL CHECKING FIXTURE | 1 | |
| FTMG-483-A-0 | MANDREL CHECK FIXTURE | 1 | |
| FXT-04547 | CHECK FIXTURE | 1 | |
| FXT-15147 | Lock Fixture | 1 | |
| FY5-06333W09-01 | FIXTURE-FLAP SREW JACK | 1 | |
| G0142710004 | FIXTURE, AILERON SLACK MEASUREMENT | 1 | |
| G1002721006-001 | FIXTURE, RUDDER, BACKLASH | 3 | |
| G25003 | TEST FIXTURE -0 MAIN DECK CARGO ENTRY DOOR GUIDE | 1 | |
| G25003-1 | TEST FIXTURE - MAIN DECK CARGO ENTRY DOOR GUIDE | 1 | |
| G27026-1 | TEST FIXTURE - INBOARD AND OUTBOARD TRAILING EDGE FLAP DRIVE POWER PACK | 1 | |
| G27067 | CHECKING FIXTURE EQPT-BALL NUT,TE FLAP DRIVE | 1 | |
| G27067-1 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G27067-2 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 3 | |
| G27067-80 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G27067-81 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G2800-48 | CHECK FIXTURE EQPT | 1 | |
| G28005 | CHECK FIXTURE EQPT. PRESSURE RELIEF VALVE | 1 | |
| G28005-14 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 5 | |
| G28005-15 | CHECK FIXTURE EQPT | 1 | |
| G28005-18 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 4 | |
| G28005-19 | CHECK FIXTURE EQPT | 1 | |
| G28005-23 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 4 | |
| G28005-24 | CHECK FIXTURE EQPT | 1 | |
| G28005-29 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 6 | |
| G28005-30 | CHECK FIXTURE EQPT | 1 | |
| G28005-35 | Check Fixture Equipment - Pressure Relief Valve | 17 | |
| G28005-36 | CHECK FIXTURE EQPT | 1 | |
| G28005-36-F | CHECK FIXTURE | 1 | |
| G28005-39 | PAN HEAD SCREW FOR CHECK FIXTURE PRV | 2 | |
| G28005-4 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| G28005-42 | CHECK FIXTURE EQUP | 2 | |
| G28005-43 | CHECK FIXTURE EQPT | 1 | |
| G28005-48 | CHECK FIXTURE EQUP | 3 | |
| G28031 | CHECK FIXTURE- REFUEL, VENT/TRANSFER, AUX FUEL | 1 | |
| G28031-1 | CHECK FIXTURE - REFUEL, VENT/TRANSFER, AUXILIARY FUEL SYSTEM | 1 | |
| G32035 | TEST FIXTURE -0 DOWNLOCK ACTUATOR, WLG & BLG | 1 | |
| G32035-1 | TEST FIXTURE - DOWNLOCK ACTUATOR, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| G34001 | CALIBRATION FIXTURE -0 ANGLE OF ATTACK SENSOR | 1 | |
| G34001-1 | CALIBRATION FIXTURE - ANGLE OF ATTACK SENSOR | 1 | |
| G34001-2 | CALIBRATION FIXTURE - ANGLE OF ATTACK SENSOR | 1 | |
| G34002-1 | FIXTURE - TEST, ANGLE OF ATTACK SENSOR, CONRAC AOA'S | 22 | |
| G34002-11 | CHECKING FIXTURE | 1 | |
| G34002-5 | CHECKING FIXTURE | 7 | |
| G600-270024-121 | FIXTURE ANGLE OF ATTACK VANE ALIGNMENT LEVEL | 5 | |
| G658590 | CHECKING FIXTURES | 1 | |
| G700-343201 | Fixture - H.U.D.S Bracket Installation | 1 | |
| G700-343201-1 | FIXTURE - H.U.D.S BRACKET INSTALLATION | 1 | |
| G700-343201-85 | FIXTURE, H.U.D.S BRACKET INSTALLATION | 1 | |
| G76003 | TEST FIXTURE -0 CONTROL STAND MICRO SWITCH PACK | 1 | |
| G76003-1 | TEST FIXTURE - CONTROL STAND MICROSWITCH PACK ASSEMBLY | 1 | |
| G76003-23 | TEST FIXTURE CONTROL STAND SWITCH PACK ASSEMBLY | 1 | |
| GE-FQAP-302B | GUIDE FIXTURE FOR HOCKING ROTORS AND NORTEC SPITFIRE 2000 ROTOR (GUIDE FIXTURE, GE-FQAP-302B) | 1 | |
| GE-FQAP-302F | HIGH SPEED GUIDE FIXTURE FOR USE WITH THE HOCKING MINI ROTOR PN: 33A100 | 1 | |
| GS10819 | GOVERNOR LEVER CHECKING FIXTURE | 1 | |
| GS11886 | FIXTURE FEEDBACK | 1 | |
| GS12552-1 | HOSE ASSY PITCHLOCK TEST FIXTURE | 1 | |
| GS12552-2 | HOSE ASSY PITCHLOCK TEST FIXTURE | 1 | |
| GS12982-1 | FIXTURE, NTS BRACKET | 1 | |
| GS13454 | FIXTURE FEEDBACK | 1 | |
| GS16189-1 | FIXTURE LOCKOUT VALVE TORQUE MOTOR | 1 | |
| GS19805-1 | SHOCK TEST FIXTURE | 1 | |
| GS21920-1 | FIXTURE, LEAK CHECK | 1 | |
| GS25565-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 7 | |
| GS25655-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| GSE499 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| GSE499-170-190 | FIXTURE, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| H150AFV208M | FIXTURE CHECKING | 1 | |
| H1X3003 | T/R CHECK FIXTURE BOTH L/H & R/H | 1 | |
| HA-355A94-3745-0113 | SWASHPLATE LOCKING FIXTURE AS355 F2 | 1 | |
| HC130H0179-000 | Fixture - back lash checking, flap ball screw jack | 3 | |
| HC132H0060-000 | JACKING FIXTURE | 3 | |
| HIX3003 | T/R CHECK FIXTURE BOTH L/H & R/H | 3 | |
| HIX3003 REV A | T/R CHECK FIXTURE BOTH L/H & R/H;A320 | 1 | |
| HS7508 | Pitch Lock Regulator Test Fixture | 1 | |
| HS7619 | PITCH LOCK RESET SOLENOID FIXTURE | 1 | |
| HS7671 | PITCHLOCK SERVO VALVE TEST FIXTURE | 2 | |
| HS7674 | PITCHLOCK REGULATOR TEST FIXTURE | 2 | |
| HS7877 | FIXTURE - GAGING,SHIM THICKNESS | 1 | |
| HS7909 | FIXTURE-GAGING, SHIM THICKNESS | 1 | |
| HS7963 | FIXTURE-GAGING,SHIM THICKNESS | 1 | |
| HS7979 | FIXTURE-VL TEST, PITCH LOCK DISARM | 2 | |
| HS8218 | FIXTURE - GAGING SHIM THICKNESS | 1 | |
| HS8809 | FIXTURE, HOLDING REF RIG PACK | 2 | |
| HS8950 | CHECKING FIXTURE | 1 | |
| HS8952 | CHECKING FIXTURE | 1 | |
| HS8961 | OIL TEST POST FIXTURE (STOCK - FN) | 2 | |
| HS9047 | CONCENTRICATY CHECKING FIXTURE | 1 | |
| HS9493 | PITCHLOCK TEST FIXTURE | 3 | |
| HSP299 | BLADE HEAD STOCK FIXTURE | 1 | |
| HU16864 | CONCENTRACITY CHECKING FIXTURE | 1 | |
| HU16864/4 | CONCENTRICITY CHECKING FIXTURE | 1 | |
| HU18930-3 | TIP CHECK FIXTURE | 1 | |
| HU21558 | CONCENTRICITY CHECKING FIXTURE | 1 | |
| HU24570 | CHECKING FIXTURE | 1 | |
| HU26190 | CHECKING FIXTURE | 1 | |
| HU29430 | CHECKING FIXTURE | 1 | |
| HU37639-2 | FIXTURE - CLOCKING, LP TURBINE SPEED PROBES | 4 | |
| HU56217-1 | Fixtures Adaptor Long Reach Jack | 1 | |
| HU87516 | LOCKING FIXTURE | 1 | |
| IAE 1P16265 | CHECKING FIXTURE | 1 | |
| IAE 3P16434 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 1 | |
| IAE1J12383 | SWASH CHECK FIXTURE | 1 | |
| IAE1J12385 | FIXTURE, BACKLASH | 1 | |
| IAE1J12469 | FIXTURE, LEAK CHECK | 1 | |
| IAE1J12470 | LEAK CHECK FIXTURE | 1 | |
| IAE1N20043 | CHECK FIXTURE | 1 | |
| IAE1N20044 | CHECK FIXTURE R/H DET #2 | 1 | |
| IAE1P16090 | FIXTURE, LEAK CHECK | 1 | |
| IAE1P16091 | FIXTURE, LEAK CHECK | 1 | |
| IAE1P16148 | FIXTURE, CHECK & CORRECT, COMBUSTION CHAMBER | 1 | |
| IAE1P16265 | IAE 1P16265 CHECKING FIXTURE | 1 | |
| IAE1P16567 | FLARING FIXTURE (SELF-LOCKING CLINCH NUT IS 0.250-28 THREAD AND IS FLARED TO 30 DEGREES CONICAL ANGLE) | 3 | |
| IAE1P16569 | TURN AND LOCK FIXTURE | 1 | |
| IAE1R18251 | FIXTURE, CHECKING | 1 | |
| IAE2F10132 | FIXTURE, BACKLASH | 1 | |
| IAE2F10139 | FIXTURE, BACKLASH | 1 | |
| IAE2J12615 | FIXTURE AIR LEAK CHECK | 1 | |
| J-TF-S | STRUTS FOR PROOF LOAD TETST FIXTURE APPLICABLE FOR ONE TRIPOD JACK | 1 | |
| J27059-38 | CHECK FIXTURE EQUIPMENT - BACKLASH, LE SLAT ANGLE GEARBOXES | 1 | |
| J27062-1 | CHECK FIXTURE | 1 | |
| J32062-1 | TRANSPORTATION EQUIPMENT - TOWER JACK OR HOLDING FIXTURE, MLG | 9 | |
| J32062-26 | TRANSPORTATION EQUIPMENT - TOWER JACK OR HOLDING FIXTURE, MLG | 7 | |
| J32070 | BUILD UP FIXTURE EQPT. SHOCK STRUT NOSE LANDING GEAR | 1 | |
| J32070-59 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 1 | |
| J32070-64 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 1 | |
| J3400-19 | FIXTURE TEST ANGLE OF ATTACK SENSOR | 1 | |
| J3400-19 OPT A34012-19 | FIXTURE TEST ANGLE OF ATTACK SENSOR | 1 | |
| J34002 | TEST FIXTURE-ANGLE OF ATTACK | 1 | |
| J34002-1 | Test Fixture-Angle Of Attack | 2 | |
| J34002-18 | Test Fixture - Angle of Attack | 5 | |
| J34002-18, -19 | TEST FIXTURE - ANGLE OF ATTACK | 1 | |
| J34002-19 | Test Fixture - Angle of Attack | 19 | |
| J34002-20 | Test fixture-angle of attack | 1 | |
| J34002-21 | Test fixture-angle of attack | 1 | |
| J34002-24 | Fixture - Test, Angle of Attack Sensor, ROSEMOUNT AOAs | 1 | |
| J34012-19 | FIXTURE - TEST, ANGLE OF ATTACK SENSOR, ROSEMOUNT AOA'S | 1 | |
| J34012-24 | FIXTURE - TEST, ANGLE OF ATTACK SENSOR, ROSEMOUNT AOA'S | 1 | |
| J52023-1 | Backlash Fixture -Large Cargo Door. Manual Drive Gearbox | 1 | |
| J52028-1 | BACKLASH FIXTURE EQUIPMENT - MANUAL DRIVE GEARBOX, LATCH PDU, LARGE CARGO DOOR | 1 | |
| J52046-1 | Positioning fixture and strongback-main landing gear door | 1 | |
| J52046-2 | Positioning fixture and strongback-main landing gear door | 1 | |
| K32033-1 | BUILD-UP FIXTURE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR | 3 | |
| K52019 | BACKLASH FIXTURE - LARGE CARGO DOOR MANUAL GEARBOX | 1 | |
| KIT-AILERON/ELEVATOR | AILERON/ELEVATOR TAB CHECK FIXTURE FOR HAWKER 4000 | 1 | |
| LJ617-4422-001 | CHECKING FIXTURE | 1 | |
| LL515A038 | LOCKING FIXTURE | 1 | |
| LLA515A038 | LOCKING FIXTURE | 1 | |
| LLA795A034 | BACKLASH AND RUNNING IN FIXTURE | 1 | |
| LMT 893 | THREE O'CLOCK LUG DRILL FIXTURE | 1 | |
| LMT 894 | SIX O'CLOCK LUG DRILL FIXTURE | 1 | |
| LMT 895 | NINE O'CLOCK LUG DRILL FIXTURE | 1 | |
| LOAD TEST FIXTURE | 717 LOAD TEST FIXTURE POGO STICKS | 1 | |
| LTCT12986-01 | Fixture, Locking, N 1 System Fan Assembly | 1 | |
| LTCT13442 | FIXTURE, PRESSURE CHECK - TUBE ASSY | 1 | |
| LTCT14611-01 | Fixture, Holding, Bevel Gear and Backlash Gage | 1 | |
| LTCT14736-02 | Fixture Assembly, Compressor Rotor Checking | 1 | |
| LTCT30835-01 | Fixture, Pressure, Check Tube Assembly | 1 | |
| LTCT4904 | BACKLASH HOLDING FIXTURE | 1 | |
| LTCT7202-01 | OIL TUBE FIXTURE PACKAGING: D-LM-008-036/SF-000 QAC:C | 1 | |
| LTCT7287-01 | FIXTURE, SPEED PICKUP GEAR TORQUE | 1 | |
| LTCT7508-01 | Fixture, No. 2 Bearing Package Pressure Check | 1 | |
| LTCT7989 | Fixture, Blade, Checking | 1 | |
| LTCT7995 | Fixture, Blade, Checking | 1 | |
| M-TF870101 | AH6I ONE WAY LOCK TEST FIXTURE | 1 | |
| M21929 | TENSIONING FIXTURE TOOL (LOCK SPRING TOOL) | 26 | |
| M2509 | AILERON CHECKING FIXTURE | 1 | |
| M57552A0000-01 | BACK LASH CHECKING FIXTURE | 1 | |
| M57811A0000-01 | END PLAY CHECKING FIXTURE | 1 | |
| M6936G001 | EROSION CHECKING FIXTURE | 1 | |
| MIT65B01290-1 | ASSEMBLY FIXTURE - UPLOCK ASSEMBLY, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| MIT65B01290-1-M | ASSY FIXTURE -0 UPLOCK | 1 | |
| MS4001659-1 | PACKING FIXTURE OFFWING SLIDE A320 | 1 | |
| OF27214 | Backlast Test Fixture | 1 | |
| OF27214PM | BACKLAST TEST FIXTURE | 1 | |
| OT900-0239 | Seat Track Setting Fixture | 1 | |
| OT900-0247 | FIXTURE-SEAT TRACKS SETTING | 5 | |
| OT900-052X | AIRCRAFT SEAT TRACK FIXTURE | 1 | |
| OT900-052Y | AIRCRAFT SEAT TRACK FIXTURE | 1 | |
| OT900-0927 | CAPT. SEAT TRACK FIXTURE | 2 | |
| OU128751 | Checking Fixture | 1 | |
| OU190818 | HYD BLOCK MOTOR BRAKE TEST FIXTURE | 1 | |
| P-1121 | PACKING FIXTURE AND RELATED COMPONENTS (REFERENCE FOLDING PROCEDURE P-11915 | 1 | |
| P-11915 | PACKING FIXTURE AND RELATED COMPONENTS (REFERENCE FOLDING PROCEDURE P-11915 OR P- | 1 | |
| P-11921 | PACKING FIXTURE AND RELATED COMPONENTS (REFERENCE FOLDING PROCEDURE P-11915 OR P- | 1 | |
| PPT-4AS5820000-450 | RUDDER CONTINUITY CHECK FIXTURE | 1 | |
| PV150B01-003 | JACK LOAD TESTING FIXTURE | 1 | |
| PWA 102240 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102241 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102244 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 2 BLADES) | 1 | |
| PWA 102245 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 2 BLADES) | 1 | |
| PWA 102247 | CHECKING FIXTURE, SHROUD LOCATION | 1 | |
| PWA 102248 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 1 BLADES) | 1 | |
| PWA 102249 | CHECKING FIXTURE (TYPE 1 BLADE) | 1 | |
| PWA 102431 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102433 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102581 | CHECKING FIXTURE (TYPE 3 BLADE) | 1 | |
| PWA 105281 | CHECKING FIXTURE (TYPE 3 BLADE) | 1 | |
| PWA 115244 | FAN FRONT BLADE LOCK FIXTURES | 2 | |
| PWA 75434 | BLADE NOTCH CHECKING FIXTURE | 2 | |
| PWA 75436 | BLADE NOTCH CHECKING FIXTURE | 2 | |
| PWA 75437 | BLADE NOTCH CHECKING FIXTURE | 2 | |
| PWA101043 | FIXTURE, CHECKING | 2 | |
| PWA102240 | CHECKING FIXTURE | 1 | |
| PWA102241 | CHECKING FIXTURE | 1 | |
| PWA102249 | CHECKING FIXTURE | 1 | |
| PWA102431 | CHECKING FIXTURE | 1 | |
| PWA102433 | CHECKING FIXTURE | 1 | |
| PWA102581 | CHECKING FIXTURE | 1 | |
| PWA105189 | BACKFLUSH FIXTURE | 1 | |
| PWA105281 | CHECKING FIXTURE | 1 | |
| PWA105767 | FIXTURE REMOVE - LPC FAN BLADE LOCK | 1 | |
| PWA111529 | FIXTURE, INSTALLATION - BLADE LOCK | 5 | |
| PWA115244 | FAN BLADE LOCK FIXTURE | 2 | |
| PWA115399 | ADAPTER FOR JACK AND SUPPORT FIXTURE | 3 | |
| PWA211269 | VACUUM CHECK FIXTURE | 1 | |
| PWA211419 | FIXTURE PIN DIFFUSER H FLANGE BRACKETS | 1 | |
| PWA25871 | FIXTURE,CHECKING - BLADE,LPT 3RD NOTCH_[PWA25871] | 1 | |
| PWA25966 | FIXTURE - MGB NOZZLE CHECK_[PWA25966] | 2 | |
| PWA25969 | FIXTURE - MGB NOZZLE CHECK_[PWA25969] | 2 | |
| PWA27363 | FIXTURE - LPT 6TH BLADE NOTCH CHECK_[PWA27363] | 1 | |
| PWA28195 | FIXTURE-CHECK | 2 | |
| PWA29081 | FIXTURE,CHECKING - HPT 2ND AXIAL TILT VN_[PWA29081] | 1 | |
| PWA29876 | FIXTURE-LOCATING ENGINE ASSY TRANSDUCER BRACKET EMUX | 1 | |
| PWA52879 | CHECKING FIXTURE | 1 | |
| PWA6320 | FIXTURE-CHECKING_[PWA6320] | 1 | |
| PWA80476 | FIXTURE,LEAK CHECK | 1 | |
| PWA80873A | FIXTURE, VACUUM CHECK | 1 | |
| PWA80896 | FIXTURE,VACUUM CHECK | 1 | |
| PWA80903 | FIXTURE,VACUUM CHECK | 1 | |
| PWA80917 | FIXTURE,LEAK CHECK | 1 | |
| PWA81846 | FIXTURE,LEAK CHECK | 1 | |
| PWA85556 | BACKFLUSH FIXTURE | 1 | |
| PWC 55630 | LOCKING FIXTURE | 5 | |
| PWC30492 | back-up fixture | 2 | |
| PWC31517 | DRILLING FIXTURE, HP TURBINE SHAFT LOCKING NUT | 1 | |
| PWC34060 | LOCKING FIXTURE | 5 | |
| PWC37564 | FIXTURE FOR PT SPACER THICKNESS DETERMINATION | 3 | |
| PWC48014 | FIXTURE CLOCKING | 1 | |
| PWC55630 | FIXTURE-RGB GEAR TRAIN LOCKING | 5 | |
| PWC55900 | LOCKING FIXTURE | 1 | |
| PWC59104 | AIR FLOW FIXTURE,SCREEN CLEANLINESS CHECK (PW150A) | 6 | |
| PWC60058 | BACKLASH FIXTURE | 1 | |
| PWC60456 | FIXTURE LEAK CHECK | 1 | |
| PWC61056 | FIXTURE-BACKLASH | 1 | |
| PWC61058 | FIXTURE-BACKLASH | 1 | |
| PWC61792 | LEAK CHECK FIXTURE | 1 | |
| PWC63309 | FIXTURE CLOCKING | 1 | |
| PWC64318 | LEAK CHECK FIXTURE | 1 | |
| PWC72324 | LEAK CHECK FIXTURE | 4 | |
| PWC72520 | FLOW CHECK FIXTURE ADAPTER | 4 | |
| PWC72700 | FLOW CHECK FIXTURE | 1 | |
| Q21820 | Stroke Gauge Checking Fixture | 1 | |
| Q21820 PM | STROKE GAUGE CHECKING FIXTURE | 1 | |
| Q21820PM | STROKE GAUGE CHECKING FIXTURE | 1 | |
| Q21825 | Checking Fixture | 1 | |
| Q21825 PM | CHECKING FIXTURE | 1 | |
| Q21825PM | CHECKING FIXTURE | 1 | |
| Q21938000 | CHECKING FIXTURE | 2 | |
| RB T101330 | CYCLIC STICK FIXTURE | 2 | |
| RB T101442 | Cyclic Stick Rigging Fixture | 1 | |
| RB0006-401-00736 | Main Transmission Backlash & Runout Insp. Fixtures | 1 | |
| RB23033028 | Fixture-Checking-Compressor Rotor Tie Bolt Stretch | 1 | |
| RB6872880 | Compressor Mounting Inserts Checking Fixture | 2 | |
| RB6873066 | FIXTURE----CHECKING, COMPRESSOR AXIS | 2 | |
| RB6887819 | FIXTURE----CHECKING, GAS PRODUCER AND POWER TURBINE SUPPORTS BEARING BORES | 1 | |
| RB6897878 | Oil Check Valve Test Fixture | 2 | |
| RC14086G01 | Fixture load test interface check genx-1b shipping stand | 1 | |
| RRT070810 | Lockplate filing fixture | 1 | |
| RSE1250 | CHECK FIXTURE INLET COWL | 1 | |
| RSE1250 REV NC | CHECK FIXTURE INLET COWL | 1 | |
| RSE1251 | CHECK FIXTURE INLET COWL | 1 | |
| RSE1251 REV NC | CHECK FIXTURE INLET COWL | 1 | |
| RSE1252 | CHECK FIXTURE INLET COWL | 1 | |
| RSE1252 REV NC | CHECK FIXTURE INLET COWL | 1 | |
| RSE1255 | FIXTURE CHECK COWL I | 2 | |
| S3S20782000 | CONCENTRICITY CHECKING FIXTURE | 1 | |
| S6470-10012-016 | DIFERENTIAL CHECK VALVE TEST FIXTURE | 1 | |
| SB-CFM56-2-75-007 | LEACKAGE FIXTURE | 1 | |
| SKB5594 | BRACKET FIXTURE | 1 | |
| SLT0036 | PACKING FIXTURE | 1 | |
| SLT0044 | PACKING FIXTURE) | 1 | |
| SPL-1917 | FIXTURE-TEST,ANGLE OF ATTACK SENSOR | 1 | |
| SPL-7130 | FIXTURE – LINKAGE CHECK, UPPER DECK SLIDE | 1 | |
| SPL-8420 | PRESS RELIEF VALVE - CHECK FIXTURE | 1 | |
| SPL-8606 | Check Fixture | 1 | |
| ST92300 | Fixture, Flow Check | 1 | |
| ST93200 | FLOW CHECK FIXTURE | 1 | |
| ST93932 | BLOCK, HOLDING FIXTURE | 1 | |
| SUT340003 | FIXTURE FOR FIXING THE ANGLE OF ATTACK SENSOR | 1 | |
| T-17574 | CHECK FIXTURE | 1 | |
| T-246396 | CHECKING FIXTURE | 1 | |
| T-466701 | Leak Check Fixture | 1 | |
| T-466701PM | LEAK CHECK FIXTURE | 1 | |
| T-6383 | FIXTURE FOR CHECKING VALVE (2 IT) | 1 | |
| T-880 | OUTPUT SHAFT KEYWAY LOCATION CHECKING FIXTURE | 1 | |
| T04574 | PACKING FIXTURE | 1 | |
| T05838 | PACKING FIXTURE | 1 | |
| T09000 | ASSEMBLY CHECK FIXTURE | 1 | |
| T101330 | CYCLIC STICK FIXTURE | 2 | |
| T246396 | END PLAY CHECK FIXTURE | 1 | |
| T304287 | END PLAY CHECKING FIXTURE | 1 | |
| T307950 | RATE OF TURN RACK TEST FIXTURE | 1 | |
| T307965 | RATE OF TURN RACK MOUNTING FIXTURE | 1 | |
| T3159-047 | LOCKWIRE FIXTURE | 1 | |
| T327265-9001 | FM CARD SET STACK FIXTURE | 1 | |
| T458793 | BLOCK END PLAY FIXTURE | 1 | |
| T474677 | Pump lapping fixture for cylinder block/valve plate | 1 | |
| T500682-02 | L-BRACKET TEST FIXTURE | 1 | |
| T500683-02 | L-BRACKET TEST FIXTURE | 1 | |
| T7020-01005 | SHOCK STRUT CYCLING TEST FIXTURE | 1 | |
| T7025-01003-011 | SHOCK STRUT SUPPORT TEST FIXTURE | 1 | |
| T7025-01005 | SHOCK STRUT CYCLING TEST FIXTURE | 1 | |
| TA5091G001 | CHECKING FIXTURE | 1 | |
| TB3124G001 | LOCK FIXTURE | 1 | |
| TB3128G001 | Blade Locking Fixture | 1 | |
| TF50B27522 | SET OF BACKLASH MEASURING FIXTURES | 1 | |
| TF55707-201 | Test Fixture (support shock strut during tests) | 1 | |
| TF55707-301 | Test fixture support shock strut while testing (restrain shock strut while testing) | 1 | |
| TF6592 | BLOCK (HIGH PRESSURE CHECK VALVE) TEST FIXTURE | 1 | |
| TF65921 | BLOCK (HIGH PRESSURE CHECK VALVE) TEST FIXTURE | 1 | |
| TF65921 | Test Fixture, Anti-Cavitation/Inlet Check Valve | 1 | |
| TF870101 | ONE-WAY LOCK TEST FIXTURE | 1 | |
| TF94006-5001 | CHECK VALVE MANIFOLD (TEST FIXTURE) | 1 | |
| TM3390G001 | CHECKING LEAK FIXTURE | 1 | |
| TM4232G001 | ENGINE TURBINE BLADE EROSION CHECK FIXTURE | 2 | |
| TM6460G002 | EROSION CHECKING FIXTURE | 1 | |
| TM6628G002 | EROSION CHECKING FIXTURE | 1 | |
| TM6935G001 | EROSION CHECKING FIXTURE | 2 | |
| TM6936G001 | EROSION CHECKING FIXTURE | 3 | |
| TMA2261 | BACKLASH CHECK FIXTURE | 1 | |
| TMA362 | STROKE CKCKING FIXTURE | 1 | |
| TO 6689-1 | HEIGH CHECK FIXTURE | 1 | |
| TO3989-101 | PACKING FIXTURE | 1 | |
| TO3989-103 | PACKING FIXTURE | 1 | |
| TO4574 | PACKING FIXTURE | 1 | |
| TO5365 | PACKING FIXTURE | 1 | |
| TO5837 | FIT CHECK FIXTURE | 1 | |
| TO5838 | PACKING FIXTURE | 1 | |
| TO6475 | PACKING FIXTURE (65563-101) | 1 | |
| TO6476 | PACKING FIXTURE (65563-102) | 1 | |
| TO6689-1 | HEIGH CHECK FIXTURE | 1 | |
| TO6690-101 | PACKING FIXTURE | 1 | |
| TO6756 | FIXTURE, CANOPY PACKING | 1 | |
| TS5000-FBAF-2 | FEEDBACK WIRE ALIGNMENT FIXTURE | 1 | |
| TS5605-1 | BACKUP SIZING FIXTURE | 1 | |
| TSF21T-51001-5 | TEST SUPPORT FIXTURE, AIR COND PACKS, AIR INLET | 1 | |
| TSF21T-51001-8 | TEST SUPPORT FIXTURE, AIR CONDITIONING PACKS, BLEED OFF KIT | 1 | |
| TSJ65B01538-1 | TEST FIXTURE - UPLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
| TSJ65B01540-1 | TEST FIXTURE - DOWNLOCK ACTUATORS, WING LANDING GEAR AND BODY LANDING GEAR | 1 | |
| U0008 | Sealing Fixture Cockpit Sliding Windows | 1 | |
| WCIS-WG-04-3-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-08-2-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-10-2-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-12-1-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-14-0-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-16-0-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-18-0-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-A33 | MANDREL CHECK FIXTURE | 1 | |
| WCIS-WG-A43 | MANDREL CHECK FIXTURE | 1 | |
| WSPL-39 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| WT-136003 | CHECKING FIXTURE | 1 | |
| WT-62814 | TEST FIXTURE BACK PRESSURE REGULATOR | 1 | |
| X-106-1-13-2 | BLOCKS, CLAMP FIXTURE | 1 | |
| XPWA211732 | Fixture,aligning-engine assy,hpt stack line transfer | 1 | |
| lC6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| 98A27303502000 | MEASURING EQUIPMENT,USE TO CHECK FIXTURE | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
