| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1AE1N20043 | CHECK FIXTURE | 1 | |
| 1AE1N20043 LH REV NC DET #2 | CHECK FIXTURE | 1 | |
| 1AE1N20044 | CHECK FIXTURE | 1 | |
| 1AE1N20044 RH REV NC DET #2 | CHECK FIXTURE | 1 | |
| 1AE1N20045 | CHECK FIXTURE | 1 | |
| 1AE1N20045 REV NC DET #2 | CHECK FIXTURE | 1 | |
| 296305-1 | CHECK FIXTURE | 1 | |
| 834425-1 | Check Fixture | 1 | |
| A27028-11 | CHECK FIXTURE | 3 | |
| A34012-24 | CHECK FIXTURE | 11 | |
| A78010-1 | CHECK FIXTURE | 1 | |
| CF65B80578 | CHECK FIXTURE | 1 | |
| CF9-217500-01 | Check Fixture | 1 | |
| CF9-217541-01 | Check Fixture | 1 | |
| F80-0-3045 | CHECK FIXTURE | 1 | |
| FXT-04547 | CHECK FIXTURE | 1 | |
| G28005-14 | CHECK FIXTURE | 4 | |
| G28005-23 | CHECK FIXTURE | 3 | |
| G28005-29 | CHECK FIXTURE | 5 | |
| G28005-35 | CHECK FIXTURE | 17 | |
| G28005-36-F | CHECK FIXTURE | 1 | |
| IAE1N20043 | CHECK FIXTURE | 1 | |
| J27059-38 | CHECK FIXTURE | 1 | |
| J27062-1 | CHECK FIXTURE | 2 | |
| SPL-8606 | Check Fixture | 1 | |
| T-17574 | CHECK FIXTURE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 2C5122P01 | FIXTURE, LPT ROTOR SEATING CHECK (CALIBRATION) | 1 | |
| (CALIB) 2C5186P01 | FIXTURE, HPT ROTOR SEATING CHECK (CALIBRATION) | 1 | |
| (CALIB) GS25565-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE (CALIBRATION) | 1 | |
| 02554-000 | CHECK FIXTURE, VENT VALVE | 1 | |
| 061-23955J | CHECKING FIXTURE | 1 | |
| 0U141935 | ALIGNMENT CHECKING FIXTURE | 1 | |
| 0U142577 | CHECKING FIXTURE | 1 | |
| 10C1155 | FIXTURE, SEATING CHECK - CORE | 1 | |
| 10C1155G02 | FIXTURE, SEATING CHECK - CORE MODULE TO INLET GEAR BOX (SEATING CHECK FIXTURE) (RECOMMENDED) | 1 | |
| 114-252 | FIXTURE FOR CHECKING THERMAL RELIEF | 1 | |
| 114-263 | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 5 | |
| 114-263 PM | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 1 | |
| 114-263PM | FIXTURE-FOR CHECK OF THE OVERINFLATION PLUGS FOR LEAKS | 1 | |
| 114-270 | FIXTURE FOR CHECKING THERMAL RELIEF | 1 | |
| 11C3094 | FIXTURE - SEATING - CHECK-NO 2 BEARING | 1 | |
| 11C3094G02 | FIXTURE, SEATING, CHECK - NO. 2 BEARING | 1 | |
| 11C3454 | FIXTURE - FLOW CHECK-NO 5 LPT BEARING DAMPER | 1 | |
| 11C3454G02 | FIXTURE, FLOW CHECK - NO. 3 BEARING DAMPERS, FHF | 1 | |
| 11C3596 | FIXTURE - PLUG - NO. 5 BEARING OIL FLOW (FLOW CHECK FIXTURE) | 1 | |
| 1698LMT | CHECKING FIXTURE | 1 | |
| 16A13174L1-1 | HOOK ACTUTOR CHECK FIXTURE | 1 | |
| 18C1174 | FIXTURE, RUNOUT - KINK CHECK | 1 | |
| 18C1341 | FIXTURE, KINK CHECK - HORIZONTAL | 1 | |
| 18C1552 | FIXTURE, FLOW CHECK - OIL | 1 | |
| 1C6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS TURBINE RTR | 1 | |
| 1C6065 REV J | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| 1C6895 | FIXTURE,DROP CHECK-COMPRESS | 1 | |
| 1C6895G01 | FIXTURE,DROP CHECK-COMPRESS | 1 | |
| 1C6909 | FIXTURE, DROP CHECK - PT ROTOR, AFT | 1 | |
| 1C6909G01 | FIXTURE, DROP CHECK - PT ROTOR, AFT | 1 | |
| 1C6996 | FIXTURE - CHECK ACTUATOR | 1 | |
| 1C6996G02 | FIXTURE CHECK VAR STATOR | 1 | |
| 1C9311G02 | FIXTURE, SEAT CHECK - COUPLING NUT, SHAFT,LPT ROTOR | 1 | |
| 1C9403 | FIXTURE, CHECK ACTUATOR | 1 | |
| 1C9403G01 | Fixture- Check Actuators VSV/VIGV | 1 | |
| 1C9616 | FIXTURE - SEAT CHECK-COUPLING NUT | 1 | |
| 1C9616G01 | Fixture, Seat Check - Coupling Nut, Shaft | 1 | |
| 1P16265 | CHECKING FIXTURE | 1 | |
| 2024046-1 | LEAKAGE CHECK FIXTURE | 1 | |
| 2024475-1 | BACKLASH CHECKING FIXTURE ASSEMBLY | 1 | |
| 2024503-1 | LEAK CHECK FIXTURE | 1 | |
| 2024742-1 | Endplay Check Fixture | 1 | |
| 21C7110G01 | FIXTURE, PRESSURE CHECK | 1 | |
| 21C7113G01 | FIXTURE, FLOW CHECK | 1 | |
| 21C7113G02 | SPECIAL TOOL - FIXTURE, FLOW CHECK, NOZZLE | 1 | |
| 21C7798G02 | FIXTURE, FLOW CHECK | 1 | |
| 2550136 | FIXTURE, BELLOWS HEIGHT CHECK | 2 | |
| 2550186 | FIXTURE, BELLOWS HEIGHT CHECK | 1 | |
| 23005430 | REAR SUPPORT CONCENTRICITY AND SQUARENESS CHECKING FIXTURE | 2 | |
| 23033028 | FIXTURE CHECKING COMPRESSOR ROTOR TIE BOLT STRETCH | 1 | |
| 23033040 | ADAPTER--PRESSURE CHECK FIXTURE, | 1 | |
| 23068592 | Fixture – Flow Check No. 5 Carbon Seal | 1 | |
| 23068617 | Fixture – Flow Check No. 4 Carbon Seal | 1 | |
| 23076508 | Fixture – Flow Check No. 4 Carbon Seal | 1 | |
| 2370-S700-401 | INTERFACE CHECKING FIXTURE | 1 | |
| 2566532-38 | TRAVEL CHECK FIXTURE ASSEMBLY (CAGE: 06848) | 1 | |
| 274046-1-1 | BACKLASH CHECKING FIXTURE | 1 | |
| 28-0-4080 | BACKLASH CHECK FIXTURE | 2 | |
| 282775TF1-101 | Check Valve Test Fixture | 1 | |
| 282775TF2-1 | Check Valve Test Fixture | 1 | |
| 285868-2-1 | RUNOUT CHECKING FIXTURE | 1 | |
| 287912-1 | FIXTURE CHECKING GEAR BACKLASH | 1 | |
| 289442-1 | LEAKAGE CHECK FIXTURE | 1 | |
| 289479-1 | FIXTURE TORQUE CHECKING | 1 | |
| 293153-1 | LEAK CHECK FIXTURE | 1 | |
| 293153-1 PM | LEAK CHECK FIXTURE | 1 | |
| 293288-1 | FLAPPER LEAK CHECK FIXTURE | 1 | |
| 293288-2 | FLAPPER LEAK CHECK FIXTURE | 1 | |
| 293643-1 | LEAK CHECKING FIXTURE | 1 | |
| 294545-1 | FLAPPER LEAK CHECK FIXTURE | 1 | |
| 294546-1 | Flapper Leak Check Fixture | 1 | |
| 296038-1 | FLAPPER LEAK CHECK FIXTURE | 1 | |
| 2C 14094G06 | FIXTURE, SEAL CHECK NO. 4 BEARING AND SEAL | 1 | |
| 2C14094 | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094 REV Y | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094G04 | SEATING CHECK FIXTURE | 1 | |
| 2C14094G05 | FIXTURE, SEATING CHECK ‐ NO. 4B BEARING AND SEAL | 1 | |
| 2C14094G06 | FIXTURE, SEAT CHECK - NO. 4B BEARING AND SEAL | 1 | |
| 2C14096 | FIXTURE, SEATING CHECK LP TURB ROTOR | 1 | |
| 2C14096 REV E | FIXTURE, SEATING CHECK LP TURB ROTOR | 1 | |
| 2C14096G02 | FIXTURE,SEATING CHECK LP TURBINE ROTOR | 1 | |
| 2C14131 | FIXTURE, SEATING CHECK HP TURB. ROTOR | 1 | |
| 2C14131 REV C | FIXTURE, SEATING CHECK HP TURB. ROTOR | 1 | |
| 2C14131G01 | FIXTURE, SEATING CHECK HP TURB | 1 | |
| 2C14131G02 | FIXTURE, SEATING CHECK HPT ROTOR | 4 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5122P01 | FIXTURE, LPT ROTOR SEATING CHECK | 1 | |
| 2C5186P01 | FIXTURE, HPT ROTOR SEATING CHECK | 1 | |
| 2C5203P01 | FIXTURE, HPT STAGE 2 DISK SEATING CHECK | 1 | |
| 2C5212 | FIXTURE, CONCENTRICITY CHECK | 1 | |
| 2C5212G01 | FIXTURE, FAN CASING CONCENTRICITY CHECK | 1 | |
| 2C5232P01 | FIXTURE, HPT LOCKNUT CHECKING | 1 | |
| 2C5937G01 | FIXTURE - BUBBLE CHECK LUBE | 1 | |
| 2C6564 | FIXTURE WATER/AIR FLOW CHECK | 1 | |
| 2C6564G01 | FIXTURE WATER/AIR FLOW CHECK | 1 | |
| 2C6934G03 | A SUMP FAN FRAME FIXTURE LEAK CHECK | 1 | |
| 2C6934G04-AF | FIXTURE,LEAK CHECK-A SUMP, FAN FRAME | 1 | |
| 2C7376G01/G03TK | Stg.1 & 2 HPT Blade Water Flow Check Fixture (CF6-80A3 / C2) | 1 | |
| 2C81145G01 | PRESSURE CHECK B-SUMP FIXTURE | 1 | |
| 2C81622 | FIXTURE - TARGET CHECK - PTO OI | 1 | |
| 2C81622G01 | FIXTURE - TARGET CHECK - PTO OI | 1 | |
| 2C81955G01 | FIXTURE, LUBE CHECK | 1 | |
| 2C90715G01 | FIXTURE, GG ROTOR DROP CHECK HOLDING | 1 | |
| 2C91170G01 | FIXTURE, PATTERN AND BACKLASH CHECK | 1 | |
| 2C91213G01 | FIXTURE-CHECKING SHIM BACKLASH | 1 | |
| 2F10321 | FIXTURE CHECKING AXIAL POSITION LPT SHAFT | 1 | |
| 30R0327G01 | SPECIAL TOOL - FIXTURE, LEAK CHECK SWIRL FRAME ANTI-ICING | 1 | |
| 376060TF1 | TEST FIXTURE, LEAK CHECK VALVE | 1 | |
| 3791055-1 | FIXTURE SHIM CHECKING | 1 | |
| 3791096-1 | FIXTURE BACKLASH CHECKING | 1 | |
| 3791203-1 | LEAK CHECK FIXTURE | 1 | |
| 3791203-1TK | LEAK CHECK FIXTURE | 1 | |
| 3CF65B80552 | CHECK FIXTURE - STABILIZER JACKSCREW DIFFERENTIAL ASSEMBLY, BACKLASH | 1 | |
| 400-8337 | CHECKING FIXTURE, END-PLAY | 1 | |
| 4076672 | DIAMETER CHECKING FIXTURE | 1 | |
| 45-135030-9 | TAB DEFLECTION CHECK FIXTURE | 4 | |
| 45-135030-9/ 810 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 2 | |
| 45-135030-9/810 | TRIM TAB DEFLECTION CHECK FIXTURE (BEECHCRAFT CORP) | 2 | |
| 45-1350309/810RT | TRIM TAB DEFLECTION CHECK FIXTURE (BEECHCRAFT COR | 1 | |
| 512056 | CHECK VALVE TEST FIXTURE | 1 | |
| 460004337 | CHECKING FIXTURE | 1 | |
| 460005847 | CHECKING FIXTURE | 2 | |
| 460005860 | CHECKING FIXTURE | 1 | |
| 4920-00-874-2547 | Fixture, End play checking | 1 | |
| 4920-99-382-7210 | CONCENTRICITY CHECKING FIXTURE | 1 | |
| 4920-99-617-1995 | CONCENTRICITY CHECKING FIXTURE | 1 | |
| 4920-99-968-3701 | CHECKING FIXTURE | 1 | |
| 55666S0000 | END PLAY CHECKING FIXTURE | 1 | |
| 55948S0000 | BACKLASH CHECKING TESTING FIXTURE | 1 | |
| 55991S0000 | BACKLASH CHECKING FIXTURE | 1 | |
| 56472S0000 | CHECKING FIXTURE | 2 | |
| 56680S0000 | CHECKING FIXTURE | 1 | |
| 56680S0000 | CHECKING FIXTURE ADAPTER | 1 | |
| 5669-1-T3 | TORQUE CHECK FIXTURE | 1 | |
| 56714S0000 | END PLAY CHECKING FIXTURE | 2 | |
| 56945A0000 | BLACKLASH CHECKING FIXTURE | 1 | |
| 56945A0000-01 | BACKLASH CHECKING FIXTURE | 1 | |
| 5916784-1 | Fixture Assy - Static Port Contour Check | 4 | |
| 5916803-1 | MLG DAMPER CHECK FIXTURE | 8 | |
| 59582A0000-01 | END PLAY CHECKING FIXTURE | 1 | |
| 5A2990-1 | FIXTURE, CHECK, MAXIMUM ENVELOPE | 1 | |
| 5A3036-1 | FIXTURE, CHECK, MAXIMUM ENVELOPE | 1 | |
| 6147CT000-041 | CHECKING FIXTURE | 1 | |
| 617-4422-001 | CHECKING FIXTURE | 1 | |
| 67439-101 | PACK HEIGHT CHECK FIXTURE | 1 | |
| 67440-101 | PACK HEIGHT CHECK FIXTURE | 1 | |
| 67441-101 | PACK HEIGHT CHECK FIXTURE | 1 | |
| 67458-102 | PACK HEIGHT CHECK FIXTURE | 1 | |
| 679-11385-1 | POLARRITY CHECK FIXTURE | 1 | |
| 690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| 6796446 | Check Fixture- Propeller Control Linkage | 1 | |
| 6796602 | FIXTURE, CHECKING, COMBUSTION LINER | 2 | |
| 6796708 | FIXTURE - CHECK, PROPELLER CONTROL LINKAGE | 3 | |
| 6796711 | FIXTURE - CHECKING, TURBINE VANE LOCKING KEY | 2 | |
| 6796712 | FIXTURE - CHECKING, STOCK | 2 | |
| 6796757 | CHECK FIXTURE RIGGING PIN | 3 | |
| 6796793 | COMBUSTION LINER ASSEMBLY CHECKING FIXTURE | 1 | |
| 6796889 | FIXTURE - CHECKING | 1 | |
| 6796937 | FIXTURE - CHECK | 2 | |
| 6796964 | FIXTURE – CHECK, BEARING INTERNAL CLEARANCE | 1 | |
| 6797590 | SIDE GEAR CHECKING FIXTURE | 2 | |
| 6798227 | FIXTURE, CHECKING, COMPRESSOR VANE ASSEMBLY | 1 | |
| 6798232 | FIXTURE - FUNCTIONAL CHECK, ANTI - ICING ASSY | 2 | |
| 6798787 | FIXTURE-COMPRESSOR DISCHARGE AIR TUBE ASSEMBLY PRESSURE CHECK | 1 | |
| 6799630 | COMP. RTR LAYBRINTH STATOR SEAL CHECKING FIXTURE | 1 | |
| 6799644 | Fixture – Concentricity Checking Turbine Rear Bear | 3 | |
| 6799718 | FIXTURE SPACER CHECKING | 1 | |
| 67999-101 | HEIGHT CHECK FIXTURE | 1 | |
| 68635-101 | HEIGHT CHECK FIXTURE | 1 | |
| 68637-101 | HEIGHT CHECK FIXTURE BASE | 1 | |
| 68661-101 | HEIGHT CHECK FIXTURE | 1 | |
| 68662-101 | HEIGHT CHECK FIXTURE BASE | 1 | |
| 6872178 | FIXTURE - FLOW CHECK AND TARGET | 1 | |
| 6872180 | FIXTURE - FLOW CHECK | 1 | |
| 6872283 | FIXTURE - CHECKING | 1 | |
| 6872475 | FIXTURE - CHECKING | 1 | |
| 6872532 | FIXTURE - CHECKING | 1 | |
| 6872804 | FIXTURE - PRESSURE CHECK | 1 | |
| 6872880 | FIXTURE一CHECKING | 1 | |
| 6873066 | FIXTURE----CHECKING, COMPRESSOR AXIS | 1 | |
| 6874005 | HOLDING FIXTURE, CHECK VALVE PLUG | 1 | |
| 6877006 | HOLDING FIXTURE CHECK VALVE PLUG | 1 | |
| 6877014 | PURGE FIXTURE, AIR (CHECK VALVE REMOVAL) BACK PRESSURES FUEL NOZZLE TO BLOW CHIPS OUT OF NOZZLE DURING CHECK VALVE MACHINING OPERATION. | 1 | |
| 6877029 | LEAK TEST FIXTURE, CARTRIDGE VALVE HOLDS CARTRIDGE VALVE FOR CHECKING VALVE SEAL. | 1 | |
| 6887000 | PRESSURE DECAY TEST FIXTURE CHECKS PRESSURE LOSS THROUGH CHECK VALVE SEAT. | 1 | |
| 6887819 | Fixture â Checking, Gas Producer and Power Turbine Supports Bearing Bores | 2 | |
| 68921-101 | HEIGHT CHECK FIXTURE | 1 | |
| 6893363 | FIXTURE - PRESSURE CHECK | 1 | |
| 6893383 | SHIM CHECKING FIXTURE | 2 | |
| 6897107 | PRE QUALIFYING FIXTURE, CHECK VALVE HOLDS CHECK VALVE DURING TESTING. | 1 | |
| 69323-101 | HEIGHT CHECK FIXTURE | 1 | |
| 69356-101 | HEIGHT CHECK FIXTURE | 1 | |
| 72P576000*N001CF | AILERON CHECKING FIXTURE | 1 | |
| 734-60988 | PILOT CHECK VALVE TEST FIXTURE (EQUIVALENT TO 737-11191) | 1 | |
| 734-60990 | CHECK VALVE TEST FIXTURE (EQUIVALENT TO 737-11193) | 1 | |
| 734-68317 | CHECK VALVE TEST FIXTURE | 1 | |
| 734-68318 | CHECK VALVE TEST FIXTURE | 1 | |
| 8007371300 | CHECKING FIXTURE | 1 | |
| 8007371400 | CHECKING FIXTURE | 1 | |
| 810 45-135030-9 | TRIM TAB DEFLECTION CHECK FIXTURE (BEECHCRAFT CORP) | 1 | |
| 810-45-135030-9 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 1 | |
| 81045-135030-9 | TRIM TAB DEFLECTION CHECK FIXTURE (BEECHCRAFT COR | 1 | |
| 833097-1 | RUNOUT CHECKING FIXTURE | 1 | |
| 833283-1 | Bearing Preload check fixture | 1 | |
| 833283-1PM | BEARING PRELOAD CHECK FIXTURE | 1 | |
| 833932-1 | FIXTURE RUNOUT CHECKING | 1 | |
| 834236-1 | Bearing Check Fixture | 1 | |
| 834236-1PM | BEARING CHECK FIXTURE | 1 | |
| 834236-2 | BEARING CHECK FIXTURE | 1 | |
| 834424-1 | Assembly And Check Fixture | 1 | |
| 834860-1 | VACUUM CHECK FIXTURE | 1 | |
| 835673-1 | BACKLASH CHECK FIXTURE ADAPTER | 1 | |
| 85414001-001-58 | CHECKING FIXTURE, GEAR LUG REPL, MLG | 1 | |
| 856A 2380G02 | FIXTURE CHECKING CENTER VENT TUBE INNER SUPPORT | 4 | |
| 856A1053 | FIXTURE, IMPINGMENT CHECK - LUBE JET | 1 | |
| 856A1053P01 | Fixture, Impingement Check - Lube Jet (impingement check fixture) | 4 | |
| 856A1053P03 | FIXTURE, IMPINGEMENT CHECK - LUBE JET (IMPINGEMENT CHECK FIXTURE) | 1 | |
| 856A1290 | FIXTURE, R/O CHECKS | 1 | |
| 856A2344G01 | Fixture Check Dimension | 1 | |
| 856A2380 | FIXTURE, CHECKING-CENTER VENT TUBE INNER SUPPORTS | 1 | |
| 856A2380G02 | Fixture, Checking - Center Vent Tube Inner Support (checking fixture) | 4 | |
| 856A2416 | CHECKING FIXTURE - INTMD FLANGE | 1 | |
| 856A2667 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G01 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G02 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G03 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 1 | |
| 856A2667G04 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 8 | |
| 856A2667G05 | AD2 RUNOUT CHECKING FIXTURE - FAN | 1 | |
| 856A2667G06 | AD2 RUNOUT CHECKING FIXTURE - FAN MAJOR | 7 | |
| 856A2746G01 | FIXTURE, CHECKING, BACKLASH | 4 | |
| 856A2748 | FIXTURE, CHECK BACKLASH | 1 | |
| 856A2748G01 | Fixture Check Backlash | 1 | |
| 856A2748G03 | FIXTURE, CHECKING | 4 | |
| 856A2923G02 | CHECKING FIXTURE | 1 | |
| 856A2924 | FIXTURE, CHECK | 1 | |
| 856A2924G01 | Checking Fixture | 4 | |
| 856A3460 | FIXTURE, CHECKING CENTER VENT TUBE INNER SUPPORTS | 1 | |
| 856A3460G01 | Checking Fixture | 1 | |
| 856A3460G02 | FIXTURE, CHECKING CENTER VENT TUBE INNER SUPPORTS | 1 | |
| 856A3460G03 | FIXTURE, CHECKING CENTER VENT TUBE INNER SUPPORTS | 1 | |
| 856A3460G04 | Fixture Check CV Tube InnerSupports | 1 | |
| 856A3460G05 | Fixture Checking | 1 | |
| 856A3460G06 | FIXTURE, CHECKING CENTER VENT TUBE INNER SUPPORTS | 6 | |
| 856A3460G06 | FIXTURE, CHECKING - CENTER VENT TUBE INNER SUPP. | 6 | |
| 856A3472G01 | AXIAL CHECKING FIXTURE - CVT | 10 | |
| 856A3474G01 | EXPANSION LOAD CHECKING FIXTURE - | 7 | |
| 856A3546 | Fixture, Checking Backlash - TGB Bevel Gear | 1 | |
| 856A3546G01 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G02 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G03 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G04 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G05 | Checking Fixture | 1 | |
| 856A3546G06 | Fixture Check Backlash Duo Bevel Gear TGB | 4 | |
| 856A3546G07 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3610G01 | Checking Fixture | 4 | |
| 856A3783 | FIXTURE CHECKING, NO 1 & NO 2 BEARING SUPPORT | 1 | |
| 856A3783G01 | Fixture, Check Dim 'V' N1&2 Bearing Support | 1 | |
| 856A3783G02 | FIXTURE - CHECKING D | 6 | |
| 856A3913 | FIXTURE, CHECK ASSEMBLY | 1 | |
| 856A3913G01 | Fixture, Checking - Assembly/TRF with No. 5 Bearing Support | 2 | |
| 856A3913G03 | FIXTURE, CHECK ASSEMBLY | 6 | |
| 856A4051 G02 | Fixture, Functional check HP Comp. Stator Liners | 1 | |
| 856A4051G02 | FIXTURE, FUNCTIONAL CHECK HL | 1 | |
| 856A4604G01 | FIXTURE, CHECKING - LPT STAGE 1 BLADE NOT ESSENTIAL TO START | 1 | |
| 856A4604G02 | FIXTURE CHECKING LPT STG 1 | 1 | |
| 856A4605G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE | 2 | |
| 856A4606G01 | FIXTURE, CHECKING - LPT STAGE 3 BLADE | 2 | |
| 856A4611 | FIXTURE CHECKING FAN BLADE | 1 | |
| 856A4611G01 | FIXTURE CHECKING FAN BLADE | 1 | |
| 856A4611G02 | FIXTURE CHECKING FAN BLADE | 1 | |
| 856A4615G04 | AIRFLOW CHECKING FIXTURE - LPT | 1 | |
| 856A5505G04 | STAGE 1 LPT BLADE (OLD CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5505G05 | Checking fixture | 1 | |
| 856A5505G06 | STAGE 1 LPT BLADE (NEW CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5505G07 | STAGE 1 LPT BLADE (NEW CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5506G04 | STAGE 2 LPT BLADE (CHECKING FIXTURE) | 1 | |
| 856A5506G05 | Checking Fixture | 1 | |
| 856A5507G04 | CHECKING FIXTURE - LPT BLADES STG 3 | 2 | |
| 856A5507G05 | Checking Fixture | 1 | |
| 856A5508G04 | FIXTURE CHECKING STAGE 4 LPT BLADE | 2 | |
| 856A5508G05 | Checking Fixture | 1 | |
| 856A5513G05 | GRINDING/CHECKING FIXTURE - | 2 | |
| 856A5513G06 | GRINDING/CHECKING FIXTURE - CONCAVE SIDE LPT BALDES STG1 | 3 | |
| 856A5515G01 | FIXTURE CHECKING | 1 | |
| 856A5515G05 | CHECKING FIXTURE | 1 | |
| 856A5517G01 | FIXTURE CHECKING | 1 | |
| 856A5517G06 | CHECKING FIXTURE | 1 | |
| 856A5519G01 | FIXTURE CHECKING | 1 | |
| 856A5519G03 | CHECKING FIXTURE | 1 | |
| 856A5522G02 | CHECKING FIXTURE | 1 | |
| 856A5556G01 | STAGE 1-4 LPT BLADE TWIST ANGLE CHECK (CONF.2 AND 3) (HOLDING FIXTURE) | 1 | |
| 856A5556G02 | FIXTURE HOLDING TWIST ANGLE CHECK LPT BLADES STAGE 1-4 | 3 | |
| 856A5562G02 | FIXTURE BUCKLING CHECK-LPT STG 1-4 | 3 | |
| 856A5574G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5621G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5655 G01 | Checking Fixture tilt angle to Stage 2 Outer | 2 | |
| 856A5655G01 | Fixture Check Tilt Angle | 2 | |
| 856A5656 G01 | Checking Fixture tilt angle to Stage 3 Outer | 1 | |
| 856A5656G01 | Fixture Check Tilt Angle | 1 | |
| 856A5749G01 | CHECKING FIXTURE - LPT NOZZLE STG 2 | 1 | |
| 856A5749G02 | CHECKING FIXTURE - LPT NOZZLE STG 2 | 1 | |
| 856A5750G01 | CHECKING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5750G02 | CHECKING FIXTURE - LPT NOZZLE STG 3 | 1 | |
| 856A5751G01 | CHECKING FIXTURE - LPT NOZZLE STG 4 | 1 | |
| 856A5752G01 | CHECKING FIXTURE - LPT NOZZLE STG 5 | 1 | |
| 856A5754G01 | CHECKING FIXTURE | 1 | |
| 856A5755G01 | CHECKING FIXTURE | 1 | |
| 856A5795G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5795G02 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5796G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5797G01 | MACHINING & CHECKING FIXTURE LPT | 1 | |
| 856A5802G01 | SEGMENT CHECKING FIXTURE - LPT | 1 | |
| 856A5803G01 | AIRFLOW CHECKING FIXTURE - LPT NOZZLE STG1 | 1 | |
| 856A5904G01 | DIM INSP CHECKING FIXTURE - LPT | 1 | |
| 856A5905G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE (CHECKING FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A5905G02 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 2 | 1 | |
| 856A5905G03 | DIM INSP CHECKING FIXTURE - LPT | 1 | |
| 856A5906G01 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A5907G01 | DIM INSP CHECKING FIXTURE - LPT | 1 | |
| 856A5911G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A6617 | FIXTURE, CHECKING - 25 DEG. & 37 DEG. ANGLED MIDSPAN SHROU | 1 | |
| 856A6617 REV D | FIXTURE, CHECKING - 25 DEG. & 37 DEG. ANGLED MIDSPAN SHROU | 1 | |
| 856A6617G06 | CHECKING FIXTURE | 2 | |
| 856A6705G01 | CHECKING FIXTURE - LPT BLADE STG 1 | 1 | |
| 856A6706G01 | CHECKING FIXTURE - LPT BLADE STG 2 | 1 | |
| 856A6707G01 | CHECKING FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A6708G01 | CHECKING FIXTURE - LPT BLADE STG 4 | 1 | |
| 856A6772G02 | FIXTURE CHECKING MACHINING | 1 | |
| 856A6776G01 | Fixture, Checking/Machining | 1 | |
| 856A6778G01 | Fixture, Checking/Machining | 1 | |
| 856A6780G01 | Fixture, Checking/Machining | 1 | |
| 856A6782G01 | Fixture, Checking/Machining | 1 | |
| 8C2672 | FIXTURE, LEAK CHECK - DRAIN MAST | 1 | |
| 8C3158 | FIXTURE - CHECK - C-CLIP ASSY | 1 | |
| 903J801-1 | ROTOR CHECKING FIXTURE | 1 | |
| 916940-1 | LEAK CHECK FIXTURE | 1 | |
| 919378 | LEAK CHECK TEST FIXTURE | 1 | |
| 919379 | LEAK CHECK TEST FIXTURE | 1 | |
| 940A684 | CHECK FIXTURE SPREADER ARM TOOL | 1 | |
| 9441M33 | FIXTURE, BACKLASH CHECKING | 1 | |
| 9441M33 REV B | FIXTURE, BACKLASH CHECKING | 1 | |
| 9461M18G02 | FIXTURE PRESSURE CHECK | 1 | |
| 9461M30G02 | Fixture Backlash Check | 1 | |
| 956A1315 | FIXTURE - SEATING CHECK - CORE MODULE TO INLET GEAR BOX | 1 | |
| 956A1323 | FIXTURE - SETMASTER/TEST - DROP CHECK TOOL | 1 | |
| 956A3089 | FIXTURE - LEAKAGE CHECK - C SUMP | 1 | |
| 956A3323 | FIXTURE - CALIBRATION - DROP CHECK TOOL | 1 | |
| 956A3624 | FIXTURE - LEAK CHECK | 1 | |
| 956A3624G01 | Fixture, Leak Check | 3 | |
| 956A6023 | FIXTURE - CLEARANCE CHECK - SENSOR N1 | 1 | |
| 956A6032 | FIXTURE - CHECK ALIGNMENT - NUT - FAN & BOOSTER | 1 | |
| 956A6034 | FIXTURE - CHECK - NIPPLE LOCATION - BEARING # 2 | 1 | |
| 956A6049 | FIXTURE -CHECK LOCATION-SYSTEM ANTI ICING -FAIRING FLOW PATH | 1 | |
| 956A6058 | FIXTURE - BACKLASH CHECK - ABRADABLE SEAL | 1 | |
| 956A6086 | FIXTURE - DIMENSION CHECK - FAN HUB | 1 | |
| 956A6161 | FIXTURE - INSTALL & CHECK - VBV DOOR | 1 | |
| 956A6460 | FIXTURE - DIMENSION CHECK - LPT | 1 | |
| 956A6545 | FIXTURE - CLEARANCE CHECK - LPT BLADES STAGE 7 | 1 | |
| 956A6617 | FIXTURE, FLOW CHECK - CARBON SEAL NO.5 BEARING | 1 | |
| 956A7006 | FIXTURE, CHECK - VARIABLE BLEED VALVE | 1 | |
| 956A8025 | FIXTURE - CHECK - NOZZLE - OIL BEARING 2 | 1 | |
| 956A8084 | FIXTURE - CHECK - ABRADABLE STRIP - RUN OUT | 1 | |
| 956A8149 | FIXTURE - CHECK - VARIABLE BLEED VALVE | 1 | |
| 956A8156 | FIXTURE - CHECK - IGV ASSEMBLY | 1 | |
| 956A8335 | FIXTURE - CHECK - LPT ZF DIMENSION | 1 | |
| 956A8476 | FIXTURE - CHECK - BACKLASH | 1 | |
| 956A8477 | FIXTURE - MASTER - ALIGNMENT/CHECK | 1 | |
| 98A27301002001 | TOOL CHECKING FIXTURE | 1 | |
| 98A27303502000 | MEASURING EQUIPMENT,USE TO CHECK FIXTURE | 2 | |
| 98D27403003000 | CHECKING TOOL-BALL SCREW AND TIE BAR FIXTURE STRUT THSA | 13 | |
| 9C2397 | CHECKING FIXTURE-HPCR BLISK 1 | 1 | |
| 9C2397G03 | CHECKING FIXTURE - HPCR BLISK 1 | 1 | |
| 9C3184 | FIXTURE, LEAK CHECK - AGB CIRCUTS | 1 | |
| 9C3184G01 | FIXTURE - LEAK CHECK | 2 | |
| 9C3185 | FIXTURE- LEAK CHECK | 1 | |
| A-31981 | TORQUE CHECK FIXTURE | 1 | |
| A18354 | CHECKING FIXTURE (2 ITEMS) | 1 | |
| A22004-1 | Checking Fixture - Autothrottle Gearbox | 5 | |
| A27028-11 | CHECKING FIXTURE - LOAD LIMITER SPRING, AILERON CONTROL | 3 | |
| A27048-1 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-2 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-3 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-40 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27049-1 | CHECK FIXTURE - LEADING EDGE SLAT ANGLE GEARBOX BACKLASH | 1 | |
| A27127-1 | Checking Fixture -Input Rod Assembly. Elevator Pcu | 3 | |
| A27127-1 | Checking fixture (3IT) | 3 | |
| A27127-2 | CHECKING FIXTURE ASSY | 1 | |
| A27127-29 | CHECKING FIXTURE - INPUT ROD ASSEMBLY, ELEVATOR PCU | 8 | |
| A27127-30 | CHECKING FIXTURE ASSY | 1 | |
| A28004-1 | CHECK FIXTURE - SURGE TANK PRESSURE RELIEF VALVE | 4 | |
| A34012-19 | Checking Fixture | 7 | |
| A78010-1 | CHECK FIXTURE - SPRING INTERLOCK BELLCRANK, JT9D | 1 | |
| AC21821000 | OPERATION CHECKING FIXTURE | 1 | |
| AGE 13852 | CHECKING FIXTURE | 1 | |
| AGE13593 | PRESSURE LEAK CHECK FIXTURE | 2 | |
| AGE13852 | CHECKING FIXTURE | 1 | |
| AGE14963 | ASSEMBLY, TEST FIXTURE, VALVE, CHECK – 7.0 IN | 1 | |
| AR024G005 | FIXTURE-CHECKING | 1 | |
| B27031 | CHECKING FIXTURE -0 POGO ROD ASSY, ELEVATOR | 1 | |
| B27031-1 | CHECKING FIXTURE | 1 | |
| B27031-16 | CHECKING FIXTURE - ELEVATOR POGO ROD ASSEMBLY | 3 | |
| B56001-74 | CHECK FIXTURE - NO. 2 WINDOW | 1 | |
| BLMG-3 | MANDREL CHECK FIXTURE | 1 | |
| BLMG-4 | MANDREL CHECK FIXTURE | 1 | |
| BLMG-5 | MANDREL CHECK FIXTURE | 1 | |
| C28005-29 | Check Fixture Equ Pressure Relief Valve | 1 | |
| CA21038K-100 | CHECKING FIXTURE - ELEVATOR POGO ROD ASSEMBLY | 1 | |
| CAMG-33 | MANDREL CHECK FIXTURE | 1 | |
| CAMG-43 | MANDREL CHECK FIXTURE | 1 | |
| CBMG-10-0-N | MANDREL CHECK FIXTURE | 4 | |
| CBMG-10-2-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-10-3-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-12-0-N | FIXTURE MANDREL CHECK | 2 | |
| CBMG-12-1-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-12-2-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-12-3-N | FIXTURE GAGE MANDREL CHECK | 3 | |
| CBMG-14-0-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-16-0-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-16-1-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-16-2-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-16-3-N | MANDREL CHECK FIXTURE | 2 | |
| CBMG-18-0-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-18-1-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-4-0-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-4-1-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-4-2-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-4-3-N | MANDREL CHECK FIXTURE | 1 | |
| CBMG-4-4-N | MANDREL CHECK FIXTURE | 3 | |
| CBMG-6-0-N | MANDREL CHECK FIXTURE | 3 | |
| CBMG-6-1-N | MANDREL CHECK FIXTURE | 4 | |
| CBMG-6-2-N | MANDREL CHECK FIXTURE | 4 | |
| CBMG-6-3-N | MANDREL CHECK FIXTURE | 3 | |
| CBMG-8-0-N | MANDREL CHECK FIXTURE | 5 | |
| CBMG-8-1-N | MANDREL CHECK FIXTURE | 6 | |
| CBMG-8-2-N | MANDREL CHECK FIXTURE | 4 | |
| CBMG-8-3-N | MANDREL CHECK FIXTURE | 6 | |
| CBMG102S | FIXTURE MANDREL CHECK | 1 | |
| CBMG12-0N | FIXTURE MANDREL CHECK | 2 | |
| CBMG12-1N | MANDREL CHECK FIXTURE | 2 | |
| CBMG12-2N | MANDREL CHECK FIXTURE | 2 | |
| CBMG123N | FIXTURE GAGE MANDREL CHECK | 3 | |
| CBMG4-0N | FIXTURE, MANDREL CHECK | 1 | |
| CBMG4-3N | MANDREL CHECK FIXTURE | 1 | |
| CBMG60S | FIXTURE MANDREL CHECK | 1 | |
| CBMG62S | FIXTURE MANDREL CHECK | 1 | |
| CBMG80S | FIXTURE MANDREL CHECK | 1 | |
| CBMG82S | FIXTURE MANDREL CHECK | 1 | |
| CBMG−12−0−N | MANDREL CHECK FIXTURE | 2 | |
| CBSG-12-0-N-1 | MANDREL CHECK FIXTURE | 1 | |
| CF314U2100-28 | CHECKING FIXTURE | 1 | |
| CF65B40907 | CHECK FIXTURE - PRESSURE RELIEF VALVE ASSEMBLY, AIR CONDITIONING | 1 | |
| CF65B57391 | CHECKING FIXTURE - ESCAPE SLIDE/RAFT | 1 | |
| CF65B57652 | LINKAGE CHECK FIXTURE - UPPER DECK SLIDE | 1 | |
| CF65B61160 | CHECKING FIXTURE - CARGO BAGGAGE RETRACTABLE GUIDE RAIL INSTALLATION | 1 | |
| CF65B62206-9 | CHECKING FIXTURE - CAM FOLLOWER INSTALLATION | 1 | |
| CF65B80562 | CHECKING FIXTURE - BALL SCREW, DRIVE MECHANISM, STABILIZER TRIM | 1 | |
| CF65B80578 | CHECK FIXTURE - QUADRANT LEVER AND BRACKET ASSEMBLY, INBOARD SPOILER | 1 | |
| CF65B80836 | CHECK FIXTURE - SPOILER CONTROL, DIFFERENTIAL MECHANISM | 1 | |
| CF65B80934 | CHECK FIXTURE - OUTBOARD AILERON GEARBOX | 1 | |
| CF65B81117 | CHECKING FIXTURE | 1 | |
| CF65B81126 | CHECK FIXTURE - OUTBOARD TRANSMISSION ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81127 | CHECK FIXTURE - INBOARD TRANSMISSION ASSEMBLY, OUTBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81128 | CHECK FIXTURE - OUTBOARD TRANSMISSION ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B81129 | CHECKING FIXTURE - INBOARD TRANSMISSION ASSEMBLY, INBOARD TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B82106 | SPRING CHECKING FIXTURE - LOAD LIMITER ASSEMBLY, AILERON CONTROL | 1 | |
| CF65B82986 | CHECK FIXTURE - BACKLASH CF65B82986 GEARBOX ASSEMBLY, INBOARD LEADING EDGE FLAP DRIVE | 1 | |
| CF65B83864 | CHECKING FIXTURE - ANGLE GEARBOX, TRAILING EDGE FLAP DRIVE | 1 | |
| CF65B94508 | CHECKING FIXTURE - BLEED DUCT, CF6-50 INTERFACE FLANGES | 1 | |
| CHA1001-048 | BACKLASH CHECKING FIXTURE | 1 | |
| CHA1001-053 | BACKLASH CHECKING FIXTURE | 1 | |
| CHA1057-323 | TORQUE LIMITER CHECKING FIXTURE | 1 | |
| CHA1062-043 | ENDFLOAT CHECKING FIXTURE | 1 | |
| CHA696-061 | CHECKING FIXTURE | 1 | |
| CHA704-599 | BACKLASH CHECKING FIXTURE | 1 | |
| CHA723-1078 | CHECKING FIXTURE | 1 | |
| CHA723-412 | CHECKING FIXTURE | 1 | |
| CJMD 127-002 | RUDDER CHECK FIXTURE | 1 | |
| CJMD127-002 | RUDDER CHECK FIXTURE | 1 | |
| CJMD127-003 | ELEVATOR TRIM TAB CHECK FIXTURE | 1 | |
| CJMD127-004 | CHECK FIXTURE (LEFT AILERON) | 1 | |
| CJMD127-005 | CHECK FIXTURE (RIGHT AILERON) | 1 | |
| CJMD227-004 | LEFT AILERON TRIM TAB CHECK FIXTURE (SPECIAL ORDER NOT STOCKED) | 1 | |
| CJMD227-005 | RIGHT AILERON TRIM TAB CHECK FIXTURE (SPECIAL ORDER NOT STOCKED) | 1 | |
| CJMD327-106 | ELEVATOR CHECK FIXTURE | 2 | |
| CJMD327-107 | RUDDER CHECK FIXTURE | 2 | |
| CJMD327-108 | RUDDER TRIM TAB CHECK FIXTURE | 2 | |
| CJMD527-101 | RUDDER AND RUDDER TRIM TAB CHECK FIXTURE | 3 | |
| CJMD527-102 | ELEVATOR AND ELEVATOR TRIM TAB CHECK FIXTURE (SPECIAL ORDER NOT STOCKED) | 1 | |
| CJMD827-001 | RUDDERCHECK FIXTURE FAB | 2 | |
| CJMD827-002 | AILERON ELEVATOR AND RUDDER TRIM FREE PLAY CHECK FIXTURE FAB | 2 | |
| CJMD827-003 | RUDDER TAB CHECK FIXTURE FAB | 2 | |
| CJMD8A27-001 | RUDDER CHECK FIXTURE | 2 | |
| CJMD8B27-001 | CHECK FIXTURE-RUDDER | 2 | |
| CJMDE27-001 | RUDDER AND RUDDER TRIM TAB CHECK FIXTURE 560-0539 THRU 5000 | 1 | |
| CJMDL247-002 | ELEVATOR AND ELEVATOR TRIM TAB CHECK FIXTURE 560-0539 THRU 5000 | 1 | |
| CJMDL27-002 | CHECK FIXTURE TOOL,LH ELEV | 2 | |
| CJMDL27-006 | CHECK FIXTURE TOOL, RH ELEV | 2 | |
| CJMDL27-007 | RUDDER AND RUDDER TRIM TAB KIT CHECK FIXTURE | 2 | |
| CJMDL27-101 | RUDDER AND RUDDER TRIM TAB KIT CHECK FIXTURE | 1 | |
| CJMDS27-001 | CHECK FIXTURE - RUDDER | 1 | |
| CJMDS27-002 | CHECK FIXTURE - LH ELEVATOR | 1 | |
| CJMDS27-003 | CHECK FIXTURE - RH ELEVATOR | 1 | |
| CODE 690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| CODE690411 | BLEED AIR SYSTEM PRESSURE AND LEAK CHECK TEST FIXTURE TOOL | 1 | |
| D15924-101 | FIT CHECK FIXTURE | 1 | |
| D46241 | CHECKING FIXTURE | 1 | |
| D46350 | Checking Fixture | 4 | |
| DRT67522 | FIXTURE-CHECKING | 1 | |
| DRT67706 | FIXTURE-CHECKING | 1 | |
| EAS/B/1206 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| Ex-74973 | Fixture, checking, comp Stator vane angle | 1 | |
| F26803000 | OPERATION CHECKING FIXTURE | 1 | |
| F27053000 | OPERATION CHECKING FIXTURE | 2 | |
| F270530000 | OPERATION CHECKING FIXTURE | 1 | |
| F71421 | FIXTURE - END PLAY CHECKING, STABILIZER TRIM ACTUATOR | 1 | |
| F71421-27 | FIXTURE - END PLAY CHECKING, STABILIZER TRIM ACTUATOR | 1 | |
| F71421-500 | Fixture - End Play Checking, Stabilizer Trim Actuator | 1 | |
| F71421-501 | Fixture - End Play Checking, Stabilizer Trim Actuator | 7 | |
| F72828 | ALIGNMENT FIXTURE -0 THRUST REVERSER TO CHECK | 1 | |
| F80166-1 | CHECK FIXTURE EQUIPMENT, PRESSURE RELIEF VALVE | 26 | |
| FMG-613-30010-A | MANDREL CHECK FIXTURE | 1 | |
| FMM-130-30010-B | MANDREL CHECK FIXTURE | 1 | |
| FTAMG-3-0-3 | MANDREL CHECK FIXTURE | 1 | |
| FTMG-3-0-3 | MANDREL CHECKING FIXTURE | 1 | |
| FTMG-483-A-0 | MANDREL CHECK FIXTURE | 1 | |
| G27067 | CHECKING FIXTURE EQPT-BALL NUT,TE FLAP DRIVE | 1 | |
| G27067-1 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G27067-2 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 3 | |
| G27067-80 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G27067-81 | CHECKING FIXTURE EQUIPMENT - BALL NUT, TRAILING EDGE FLAP DRIVE | 5 | |
| G28005 | CHECK FIXTURE EQPT. PRESSURE RELIEF VALVE | 1 | |
| G28005-14 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 4 | |
| G28005-15 | CHECK FIXTURE EQPT | 1 | |
| G28005-18 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 2 | |
| G28005-19 | CHECK FIXTURE EQPT | 1 | |
| G28005-23 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 3 | |
| G28005-24 | CHECK FIXTURE EQPT | 1 | |
| G28005-29 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 5 | |
| G28005-30 | CHECK FIXTURE EQPT | 1 | |
| G28005-35 | Check Fixture Equipment - Pressure Relief Valve | 17 | |
| G28005-36 | CHECK FIXTURE EQPT | 1 | |
| G28005-39 | PAN HEAD SCREW FOR CHECK FIXTURE PRV | 2 | |
| G28005-4 | CHECK FIXTURE EQUIPMENT - PRESSURE RELIEF VALVE | 1 | |
| G28005-42 | CHECK FIXTURE EQUP | 2 | |
| G28005-43 | CHECK FIXTURE EQPT | 1 | |
| G28005-48 | CHECK FIXTURE EQUP | 3 | |
| G28031 | CHECK FIXTURE- REFUEL, VENT/TRANSFER, AUX FUEL | 1 | |
| G28031-1 | CHECK FIXTURE - REFUEL, VENT/TRANSFER, AUXILIARY FUEL SYSTEM | 1 | |
| G34002-11 | CHECKING FIXTURE | 1 | |
| G34002-5 | CHECKING FIXTURE | 7 | |
| G658590 | CHECKING FIXTURES | 1 | |
| GS10819 | GOVERNOR LEVER CHECKING FIXTURE | 1 | |
| GS21920-1 | FIXTURE, LEAK CHECK | 1 | |
| GS25565-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 7 | |
| GS25655-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| GSE499 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| H150AFV208M | FIXTURE CHECKING | 1 | |
| H1X3003 | T/R CHECK FIXTURE BOTH L/H & R/H | 1 | |
| HC130H0179-000 | Fixture - back lash checking, flap ball screw jack | 3 | |
| HIX3003 | T/R CHECK FIXTURE BOTH L/H & R/H | 3 | |
| HIX3003 REV A | T/R CHECK FIXTURE BOTH L/H & R/H;A320 | 1 | |
| HS8950 | CHECKING FIXTURE | 1 | |
| HS8952 | CHECKING FIXTURE | 1 | |
| HS9047 | CONCENTRICATY CHECKING FIXTURE | 1 | |
| HU16864 | CONCENTRACITY CHECKING FIXTURE | 1 | |
| HU16864/4 | CONCENTRICITY CHECKING FIXTURE | 1 | |
| HU18930-3 | TIP CHECK FIXTURE | 1 | |
| HU21558 | CONCENTRICITY CHECKING FIXTURE | 1 | |
| HU24570 | CHECKING FIXTURE | 1 | |
| HU26190 | CHECKING FIXTURE | 1 | |
| HU29430 | CHECKING FIXTURE | 1 | |
| IAE 1P16265 | CHECKING FIXTURE | 1 | |
| IAE1J12383 | SWASH CHECK FIXTURE | 1 | |
| IAE1J12469 | FIXTURE, LEAK CHECK | 1 | |
| IAE1J12470 | LEAK CHECK FIXTURE | 1 | |
| IAE1N20043 | CHECK FIXTURE L/H DET #2 | 1 | |
| IAE1N20044 | CHECK FIXTURE R/H DET #2 | 1 | |
| IAE1P16090 | FIXTURE, LEAK CHECK | 1 | |
| IAE1P16091 | FIXTURE, LEAK CHECK | 1 | |
| IAE1P16148 | FIXTURE, CHECK & CORRECT, COMBUSTION CHAMBER | 1 | |
| IAE1P16265 | IAE 1P16265 CHECKING FIXTURE | 1 | |
| IAE1R18251 | FIXTURE, CHECKING | 1 | |
| IAE2J12615 | FIXTURE AIR LEAK CHECK | 1 | |
| J27059-38 | CHECK FIXTURE EQUIPMENT - BACKLASH, LE SLAT ANGLE GEARBOXES | 1 | |
| KIT-AILERON/ELEVATOR | AILERON/ELEVATOR TAB CHECK FIXTURE FOR HAWKER 4000 | 1 | |
| LJ617-4422-001 | CHECKING FIXTURE | 1 | |
| LTCT13442 | FIXTURE, PRESSURE CHECK - TUBE ASSY | 1 | |
| LTCT14736-02 | Fixture Assembly, Compressor Rotor Checking | 1 | |
| LTCT30835-01 | Fixture, Pressure, Check Tube Assembly | 1 | |
| LTCT7508-01 | Fixture, No. 2 Bearing Package Pressure Check | 1 | |
| LTCT7989 | Fixture, Blade, Checking | 1 | |
| LTCT7995 | Fixture, Blade, Checking | 1 | |
| M2509 | AILERON CHECKING FIXTURE | 1 | |
| M57552A0000-01 | BACK LASH CHECKING FIXTURE | 1 | |
| M57811A0000-01 | END PLAY CHECKING FIXTURE | 1 | |
| M6936G001 | EROSION CHECKING FIXTURE | 1 | |
| OU128751 | Checking Fixture | 1 | |
| PPT-4AS5820000-450 | RUDDER CONTINUITY CHECK FIXTURE | 1 | |
| PWA 102240 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102241 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102244 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 2 BLADES) | 1 | |
| PWA 102245 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 2 BLADES) | 1 | |
| PWA 102247 | CHECKING FIXTURE, SHROUD LOCATION | 1 | |
| PWA 102248 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 1 BLADES) | 1 | |
| PWA 102249 | CHECKING FIXTURE (TYPE 1 BLADE) | 1 | |
| PWA 102431 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102433 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102581 | CHECKING FIXTURE (TYPE 3 BLADE) | 1 | |
| PWA 105281 | CHECKING FIXTURE (TYPE 3 BLADE) | 1 | |
| PWA 75434 | BLADE NOTCH CHECKING FIXTURE | 2 | |
| PWA 75436 | BLADE NOTCH CHECKING FIXTURE | 2 | |
| PWA 75437 | BLADE NOTCH CHECKING FIXTURE | 2 | |
| PWA101043 | FIXTURE, CHECKING | 2 | |
| PWA102240 | CHECKING FIXTURE | 1 | |
| PWA102241 | CHECKING FIXTURE | 1 | |
| PWA102249 | CHECKING FIXTURE | 1 | |
| PWA102431 | CHECKING FIXTURE | 1 | |
| PWA102433 | CHECKING FIXTURE | 1 | |
| PWA102581 | CHECKING FIXTURE | 1 | |
| PWA105281 | CHECKING FIXTURE | 1 | |
| PWA25871 | FIXTURE,CHECKING - BLADE,LPT 3RD NOTCH_[PWA25871] | 1 | |
| PWA25966 | FIXTURE - MGB NOZZLE CHECK_[PWA25966] | 2 | |
| PWA25969 | FIXTURE - MGB NOZZLE CHECK_[PWA25969] | 2 | |
| PWA27363 | FIXTURE - LPT 6TH BLADE NOTCH CHECK_[PWA27363] | 1 | |
| PWA28195 | FIXTURE-CHECK | 2 | |
| PWA29081 | FIXTURE,CHECKING - HPT 2ND AXIAL TILT VN_[PWA29081] | 1 | |
| PWA52879 | CHECKING FIXTURE | 1 | |
| PWA6320 | FIXTURE-CHECKING_[PWA6320] | 1 | |
| PWA80476 | FIXTURE,LEAK CHECK | 1 | |
| PWA80873A | FIXTURE, VACUUM CHECK | 1 | |
| PWA80896 | FIXTURE,VACUUM CHECK | 1 | |
| PWA80903 | FIXTURE,VACUUM CHECK | 1 | |
| PWA80917 | FIXTURE,LEAK CHECK | 1 | |
| PWA81846 | FIXTURE,LEAK CHECK | 1 | |
| PWC59104 | AIR FLOW FIXTURE,SCREEN CLEANLINESS CHECK (PW150A) | 6 | |
| PWC60456 | FIXTURE LEAK CHECK | 1 | |
| PWC61792 | LEAK CHECK FIXTURE | 1 | |
| PWC64318 | LEAK CHECK FIXTURE | 1 | |
| PWC72324 | LEAK CHECK FIXTURE | 4 | |
| PWC72520 | FLOW CHECK FIXTURE ADAPTER | 4 | |
| PWC72700 | FLOW CHECK FIXTURE | 1 | |
| Q21820 | Stroke Gauge Checking Fixture | 1 | |
| Q21820 PM | STROKE GAUGE CHECKING FIXTURE | 1 | |
| Q21820PM | STROKE GAUGE CHECKING FIXTURE | 1 | |
| Q21825 | Checking Fixture | 1 | |
| Q21825 PM | CHECKING FIXTURE | 1 | |
| Q21825PM | CHECKING FIXTURE | 1 | |
| Q21938000 | CHECKING FIXTURE | 2 | |
| RB23033028 | Fixture-Checking-Compressor Rotor Tie Bolt Stretch | 1 | |
| RB6872880 | Compressor Mounting Inserts Checking Fixture | 2 | |
| RB6873066 | FIXTURE----CHECKING, COMPRESSOR AXIS | 2 | |
| RB6887819 | FIXTURE----CHECKING, GAS PRODUCER AND POWER TURBINE SUPPORTS BEARING BORES | 1 | |
| RB6897878 | Oil Check Valve Test Fixture | 2 | |
| RSE1250 | CHECK FIXTURE INLET COWL | 1 | |
| RSE1250 REV NC | CHECK FIXTURE INLET COWL | 1 | |
| RSE1251 | CHECK FIXTURE INLET COWL | 1 | |
| RSE1251 REV NC | CHECK FIXTURE INLET COWL | 1 | |
| RSE1252 | CHECK FIXTURE INLET COWL | 1 | |
| RSE1252 REV NC | CHECK FIXTURE INLET COWL | 1 | |
| RSE1255 | FIXTURE CHECK COWL I | 3 | |
| S3S20782000 | CONCENTRICITY CHECKING FIXTURE | 1 | |
| S6470-10012-016 | DIFERENTIAL CHECK VALVE TEST FIXTURE | 1 | |
| SPL-7130 | FIXTURE – LINKAGE CHECK, UPPER DECK SLIDE | 1 | |
| SPL-8420 | PRESS RELIEF VALVE - CHECK FIXTURE | 1 | |
| ST92300 | Fixture, Flow Check | 1 | |
| ST93200 | FLOW CHECK FIXTURE | 1 | |
| T-246396 | CHECKING FIXTURE | 1 | |
| T-466701 | Leak Check Fixture | 1 | |
| T-466701PM | LEAK CHECK FIXTURE | 1 | |
| T-6383 | FIXTURE FOR CHECKING VALVE (2 IT) | 1 | |
| T-880 | OUTPUT SHAFT KEYWAY LOCATION CHECKING FIXTURE | 1 | |
| T09000 | ASSEMBLY CHECK FIXTURE | 1 | |
| T246396 | END PLAY CHECK FIXTURE | 1 | |
| T304287 | END PLAY CHECKING FIXTURE | 1 | |
| TA5091G001 | CHECKING FIXTURE | 1 | |
| TF6592 | BLOCK (HIGH PRESSURE CHECK VALVE) TEST FIXTURE | 1 | |
| TF65921 | BLOCK (HIGH PRESSURE CHECK VALVE) TEST FIXTURE | 1 | |
| TF65921 | Test Fixture, Anti-Cavitation/Inlet Check Valve | 1 | |
| TF94006-5001 | CHECK VALVE MANIFOLD (TEST FIXTURE) | 1 | |
| TM3390G001 | CHECKING LEAK FIXTURE | 1 | |
| TM4232G001 | ENGINE TURBINE BLADE EROSION CHECK FIXTURE | 2 | |
| TM6460G002 | EROSION CHECKING FIXTURE | 1 | |
| TM6628G002 | EROSION CHECKING FIXTURE | 1 | |
| TM6935G001 | EROSION CHECKING FIXTURE | 2 | |
| TM6936G001 | EROSION CHECKING FIXTURE | 3 | |
| TMA2261 | BACKLASH CHECK FIXTURE | 1 | |
| TO 6689-1 | HEIGH CHECK FIXTURE | 1 | |
| TO5837 | FIT CHECK FIXTURE | 1 | |
| TO6689-1 | HEIGH CHECK FIXTURE | 1 | |
| WCIS-WG-04-3-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-08-2-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-10-2-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-12-1-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-14-0-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-16-0-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-18-0-N | MANDREL CHECK FIXTURE | 2 | |
| WCIS-WG-A33 | MANDREL CHECK FIXTURE | 1 | |
| WCIS-WG-A43 | MANDREL CHECK FIXTURE | 1 | |
| WSPL-39 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE | 1 | |
| WT-136003 | CHECKING FIXTURE | 1 | |
| lC6065 | FIXTURE, CONCENTRICITY CHECK-LOW PRESS. TURBINE ROTOR | 1 | |
| 98A27303502000 | MEASURING EQUIPMENT,USE TO CHECK FIXTURE | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
