| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C38005-112 | CHAMBER | 1 | |
| D057214-01 | Chamber | 1 | |
| F80166-2 | CHAMBER | 1 | |
| G35005-12 | CHAMBER | 1 | |
| G38005-112 | CHAMBER | 1 | |
| G38005-12 | CHAMBER | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 3792548-1 | MOBILE PNEUMATIC VACUUM CHAMBER | 1 | |
| G38005-111 | TEST CHAMBER EQUIPMENT | 11 | |
| 00061-2330-0001 | VANE PRESSURE CHAMBER | 1 | |
| 0319730460 | ADAPTOR, COMBUSTION CHAMBER DRAIN | 1 | |
| 0356660020 | PIPE DRAIN VALVE CHAMBER | 1 | |
| 0U191027-026 | ANNULAR CHAMBER UNION | 1 | |
| 0U191027-027 | ANNULAR CHAMBER UNION | 1 | |
| 0U191027-028 | ANNULAR CHAMBER UNION | 1 | |
| 1081992 | STUDS FOR FIXING COMBUSTION CHAMBERS | 1 | |
| 117-2 | SMOKE TEST BENCH/CALIBRATION CHAMBER | 4 | |
| 11774-02 | 4 STN WELDING CHAMBER | 1 | |
| 16-11-2 | VACUUM CHAMBER | 1 | |
| 16/11/2002 | TEST CHAMBER-VACCUM INSTRUMENTS | 1 | |
| 18903050000 | TEMPERATURE CHAMBER | 1 | |
| 18903170000 | TEMPERATURE ALTITUDE CHAMBER | 1 | |
| 18960100000 | VACUUM CHAMBER | 1 | |
| 1C9423 | COMB CHAMBER ASSEMBLY | 1 | |
| 2056B0000-01 | PLENUM CHAMBER | 1 | |
| 2056C0000-01 | PLENUM CHAMBER | 1 | |
| 259084-8 | Vacuum Chamber Adapter | 1 | |
| 291617-1 | CHAMBER VOLUME VALVE TEST | 1 | |
| 291618-1 | CHAMBER VOLUME VALVE TEST | 1 | |
| 2C14760 | CONTAINER, SHIPPING - COMBUSTION CHAMBER LINER | 1 | |
| 2C14760 REV C | CONTAINER, SHIPPING - COMBUSTION CHAMBER LINER | 1 | |
| 2C5116G01 | STAND - COMBUSTION CHAMBER | 1 | |
| 2C5273G01 | PIN, COMBUST CHAMBER | 2 | |
| 2C5635G01 | FIXTURE - COMB. CHAMBER SIZING | 1 | |
| 2S0975-0000 | PRESSURE CHAMBER | 1 | |
| 30R0508G01 | FIXTURE, INSPECTION / SIZING, IGNITER PORT-COMBUSTION CHAMBER LINER | 1 | |
| 3309293-2 | CHAMBER ASSEMBLY, ALTITUD TEST | 1 | |
| 3700546-2 | KIT- APU COMBUSTOR CHAMBER WASH | 8 | |
| 3700546−2 | APU COMBUSTOR CHAMBER WASH | 8 | |
| 3791170-1 | VACUUM CHAMBER | 1 | |
| 59000150-1 | SAFETY CHAMBER CARTRIDGE | 1 | |
| 60000-900 | TWO-CHAMBER WATER BAG | 1 | |
| 6796057 | LIFT - COMBUSTION CHAMBER CASING | 2 | |
| 6796810 | ADAPTER ATTACHING COMBUSTION CHAMBER CASING LIFT | 3 | |
| 6797049 | LIFT - COMB CHAMBER CASING | 1 | |
| 6798800 | Jig – Drill, Combustion Chamber Inner Casing | 1 | |
| 6799708 | Fixture â Alignment, Inner Combustion Chamber Oil Tubes | 2 | |
| 6872426 | SPIN CHAMBER - COMP WHEELS AND IMPELLER | 1 | |
| 6877011 | HOLDING FIXTURE, FINAL TEST HOLDS FUEL NOZZLE/COMPONENTS ON SPRAY CHAMBER DURING ASSEMBLY AND TESTING. | 1 | |
| 59000067 | SAFETY CHAMBER | 1 | |
| 72-5-10-3 | TEST CHAMBER | 1 | |
| 74-21-21 | COMBUSTION CHAMBER IGN PLUG ALIGN. TOOL | 1 | |
| 83330118 | SAFETY CHAMBER CARTRIDGE | 2 | |
| 83330118 & 83330760 | SAFETY CHAMBER, CARTRIDGE | 1 | |
| 83330118-119 | SAFETY CHAMBER CARTRIDGE ELECTRO ETC | 2 | |
| 83330760 | SAFETY CHAMBER CARTRIDGE | 1 | |
| 83330764 | SAFETY CHAMBER,CARTRIDGE | 1 | |
| 83330764 OR 83330765 | SAFETY CHAMBER, CARTRIDGE | 1 | |
| 83330765 | SAFETY CHAMBER, CARTRIDGE | 1 | |
| 856A1093 | FIXTURE, LIFT - COMB CHAMBER & HPT TURB NOZZLE INNER SUPPORT | 2 | |
| 856A1093 G03 | Fixture Lift ‐ Combustion Chamber and HPT Nozzle | 8 | |
| 856A1093G01 | FIXTURE, LIFT - COMB CHAMBER & HPT TURB NOZZLE INNER SUPPORT | 1 | |
| 856A1093G02 | FIXTURE, LIFT - COMB CHAMBER & HPT TURB NOZZLE INNER SUPPORT | 1 | |
| 856A1093G03 | FIXTURE, LIFT - COMB CHAMBER & HPT TURB NOZZLE INNER SUPPORT | 8 | |
| 856A1151G01 | CONTAINER, SHIPPING-COMBUS.CHAMBER | 1 | |
| 856A1151G02 | Cont. Cusb Chamber | 1 | |
| 856A1332G01 | CONTAINER, COMBUSTOR CHAMBER | 9 | |
| 856A1376G01 | CONTAINER, COMBUSTOR CHAMBER | 1 | |
| 856A1425G01 | FIXT LIFT COMB CHAMBER & HPT | 3 | |
| 856A1607 | FIXTURE, LIFT - COMB CHAMBER / HP TURB NOZZLE | 1 | |
| 856A1607G01 | FIXT LIFT COMB CHAMBER | 10 | |
| 856A1607G02 | FIXTURE, LIFT - COMB CHAMBER/HPT NOZZLE (LIFT FIXTURE) | 1 | |
| 856A1607G02 | FIXTURE, LIFT - COMBUSTION CHAMBER /HPT NOZZLE | 1 | |
| 856A4098G01 | FIXTURE EDM DOME – COMBUSTION CHAMBER | 1 | |
| 856A4201G02 | FIXTURE, ASSEMBLE AND INSPECT - COMBUSTION CHAMBER(ASSEMBLE AND INSPECT FIXTURE) | 1 | |
| 856A4230 | (RT) FIXTURE, MACHINING LINER, OUTER-COMB CHAMBER | 1 | |
| 856A4230G03 | FIXTURE, MACHINING – OUTER LINER, COMBUSTION CHAMBER | 1 | |
| 856A4304G01 | FIXTURE, SIZING SHOE – COMBUSTION CHAMBER DOME | 1 | |
| 856A4329G01 | FIXTURE, WELDING - COMB CHAMBER LINER | 1 | |
| 8844B | LANDING GEAR MAINTENANCE CART. DESIGNED TO SERVICE ALL SINGLE OR DUAL CHAMBER STRUTS FOR NARROW AND | 6 | |
| 900096 | ANECHOIC CHAMBER | 1 | |
| 910-35-2 | SAFETY CHAMBER | 1 | |
| 91035-2 | CHAMBER SAFETY CARTRIDGE | 1 | |
| ABDI-1000 | SANDBLASTING CHAMBER | 1 | |
| AGE-00804-401 | Support toe in chamber check | 3 | |
| AI-9000-2-030 | TUBE (CHAMBERS) | 1 | |
| AST-35 | HASS CHAMBER | 1 | |
| AZL1083-R00 | IRON WHEEL RIM 8'' WITH TIRE 4.80/4.00 X 8 AIR CHAMBER BEARING 6205 - DIAMETER 25MM | 1 | |
| BK1108 | THERMAL CHAMBER | 1 | |
| BS2185 | CHAMBER: TEST,TEMP SENSOR, 115 VAC, REQUIRES CALIBRATION | 1 | |
| C107-07-0580 | PRESSURE CHAMBER | 1 | |
| C32074-1 | LINK RESTRAINT - LOWER CHAMBER, MAIN LANDING GEAR | 1 | |
| C32075-1 | INNER CHAMBER REMOVAL/INSTALLATION EQUIPMENT - INNER CYLINDER, MAIN LANDING GEAR | 1 | |
| CINCINNATI SUB-ZERO | CLIMATE CHAMBER | 1 | |
| CT210-211-220 | SMOKE CHAMBER | 1 | |
| CT492 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 5 | |
| CV250 | Vacuum Chamber | 1 | |
| CV400 | Vacuum Chambers | 1 | |
| D2157120002200 | CHAMBER ASSY AIR PLENUM | 1 | |
| D2157120002400 | CHAMBER ASSY AIR PLENUM | 1 | |
| DAPT60-0188-00 | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 8 | |
| DAPT60-0188-00-IAS | WRENCH-BEARING, PRESSURE CHAMBER | 1 | |
| DAPT60-0188-00IAS | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 1 | |
| DAPT60−0188−00 | WRENCH − BEARING, PRESSURE CHAMBER SEAL FAILURE (SERIES 400) | 8 | |
| DZZ7208-1 | Adapter-MLG auxiliary chamber torque | 1 | |
| ECA060M101 | Chamber Door | 1 | |
| EMB-SCLV-PC | EMB PBS600 SINGLE CHAMBER LIFE VEST | 1 | |
| F47127 | EXTRACTOR FOR END RESTRICTOR CHAMBER | 3 | |
| F70291-1 | ENG COMP CHAMBER MOUNT BOLT WR | 2 | |
| F73010 | LEAKAGE TEST CHAMBER FWD LAVATORY DRAIN | 1 | |
| F73010-1 | LEAKAGE TEST-CHAMBER ASSY | 1 | |
| F73010-27 | LEAKAGE TEST CHAMBER | 7 | |
| F80166-2 | Chamber assy | 1 | |
| G27088 | VARIABLE CHAMBER KRUEGER | 1 | |
| G27088-1 | SUPPORT EQUIPMENT - VARIABLE CHAMBER KRUEGER AND KRUEGER FLAPS | 2 | |
| G27088-2 | SUPPORT EQUIPMENT - VARIABLE CHAMBER KRUEGER AND KRUEGER FLAPS | 1 | |
| G27088-3 | SUPPORT EQUIPMENT - VARIABLE CHAMBER KRUEGER AND KRUEGER FLAPS | 1 | |
| G27088-4 | SUPPORT EQUIPMENT - VARIABLE CHAMBER KRUEGER AND KRUEGER FLAPS | 1 | |
| G27088-5 | SUPPORT EQUIPMENT - VARIABLE CHAMBER KRUEGER AND KRUEGER FLAPS | 1 | |
| G35005 | TEST CHAMBER EQPT-LAVATORY SERVICE PANEL | 1 | |
| G35005-1 | TEST CHAMBER EQPT | 1 | |
| G35005-111 | TEST CHAMBER EQPT | 1 | |
| G35005-52 | CHAMBER ASSY | 1 | |
| G38005 | TEST CHAMBER EQPT. LAVATORY SERVICE PANEL | 1 | |
| G38005-1 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 1 | |
| G38005-111 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 11 | |
| G38005-111-M | TEST CHAMBER EQPT | 1 | |
| G38005-111-ML | TEST CHAMBER EQPT | 1 | |
| G38005-114 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 1 | |
| G38005-115 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 1 | |
| G38005-137 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 2 | |
| G38005-2 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 1 | |
| G38005-3 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 1 | |
| G38005-60 | TEST CHAMBER EQPT -0 LAVATORY SERVICE PANEL | 1 | |
| G38005-61 | TEST CHAMBER EQUIPMENT - LAVATORY SERVICE PANEL | 3 | |
| G38005-87 | TEST CHAMBER - LAV | 5 | |
| GCPAM1001 | CHAMBER PROGRAM EMITTER | 1 | |
| GDCT166 | REPLMNT CHAMBERS FOR GDCT16 | 1 | |
| GS12954-1 | FIXTURE, AIR INLET SERVO CHAMBER | 2 | |
| GS22818-1 | CHAMBER, VACUUM | 1 | |
| GS24151-2 | ZONE TEMPLATE (CHAMBER SIDE) | 1 | |
| GS24196-1 | ALTITUDE SIMULATION CHAMBER | 1 | |
| GS24197-1 | ALTITUDE CHAMBER DUCT ASSEMBLY | 1 | |
| IAE1P16148 | FIXTURE, CHECK & CORRECT, COMBUSTION CHAMBER | 1 | |
| IAE1R18757 | V2500 COMBUSTION CHAMBER TORCH FIXTURE | 11 | |
| J12007-1 | ADAPTER - NOSE LANDING GEAR UPPER CHAMBER | 6 | |
| MCB-1.2-33-H/AC | CLIMATIC CHAMBER | 1 | |
| ME45462250DB | TOOL CHAMBER | 1 | |
| MIT65B15171 | TORQUE ADAPTER VARIABLE CHAMBER FLAP HIN | 2 | |
| MODEL GL1620 | PORTABLE VACUMM CHAMBER | 1 | |
| MSUP-300A-OCETSCHAMBER | MSUP-300A-OCETSCHAMBER;MAP-300 OCETS Chamber Driver License | 1 | |
| MSUP-OCETSCHAMBER | MSUP-OCETSCHAMBER;MAP-200 OCETS Chamber Driver License | 1 | |
| N 500/65 HA | NABERTHERM FURNACES - AIR CIRCULATION CHAMBER FURNACES MODEL NO: N 500/65 HA - ELECTRICALLY HEATED | 1 | |
| N/A | SEALED CHAMBER | 5 | |
| OF27942 | VACUUM CHAMBER | 1 | |
| Olympus 31cm Swing Boroscope | Olympus 31cm Swing Boroscope - 31cm Swing Boroscope, Scan and view large areas quickly, Ideal for inspecting HVAC duct work, turbines, large diameter pipes and combustion chambers | 1 | |
| PWA 28834 | COMBUSTION CHAMBER | 1 | |
| PWA 77176 | COLLAR FOR EXTERNAL REAR COMBUSTION CHAMBER HOUSING | 1 | |
| PWA24524 | TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER | 10 | |
| PWA25501 | PIN - ENG ASSY DIFF & INNER COMB CHAMBER_[PWA25501] | 2 | |
| PWA27641 | TOOL - MEASURING, SERVICE WEAR TAP - THREAD CHASING, SPARK IGNITER BOSS CHAMBER TAP - THREAD CHASING, DIFFUSER CASE/IGNITER BOSS THREAD CHASING DIE - 1.00-20UNS-3A THREAD CHASING DIE - 0.9375-16NS | 5 | |
| PWA34571 | CHAMBER, VACUUM | 1 | |
| PWA44008 | SLING HANDLING ENGINE ASSY INNER COMBUSTION CHAMBER LINER | 1 | |
| PWA45265 | Collar (Lifting Fixture, Combustion Chamber Outer Case) | 1 | |
| PWA85606 | BRACKET HANDLING ENG. ASSY DIFFUSER AND COMBUSTION CHAMBER | 1 | |
| PWA85607 | BRACKET HANDLING ENG. ASSY DIFFUSER AND COMBUSTION CHAMBER | 1 | |
| PWA85653 | GAGE IMMERSION COMBUSTION CHAMBER | 1 | |
| PWC 30506 | SPRAY CHAMBER | 6 | |
| PWC-30506 | SPRAY CHAMBER | 6 | |
| PWC30506 | SPRAY CHAMBER | 6 | |
| PWC34415 | COMBUSTION CHAMBER PULLER | 1 | |
| PWC37422 | LOCATOR, COMB CHAMBER | 1 | |
| PWC37442 | OUTER COMBUSTIBLE CHAMBER LOCATOR | 12 | |
| PWC37442D | COMBUSTION CHAMBER OUTER LINER | 1 | |
| PWC37686 | FUEL MANIFOLD ADAPTER CHAMBER | 1 | |
| PWC37686 | Fuel Manifold Adapter Chamber | 1 | |
| PWC37686 | CHAMBER, FUEL NOZZLE | 1 | |
| PWC48280 | FIXTURE ASSEMBLY COMBUSTION CHAMBER | 1 | |
| PWC76057 | FIXTURE LINER ASSEMBLY COMBUSTION CHAMBER | 1 | |
| PWC90086 | FUEL NOZZLE TEST CHAMBER | 6 | |
| ROC476008 | PRECHAMBER REMOVAL TOOL | 1 | |
| ROC476068 | PRECHAMBER CHECK VALVE REMO TL | 1 | |
| ROC476069 | PRECHAMBER CHK VAL TL 1 PERCEN | 1 | |
| S-590017500 | TOOL FOR TEST OF EBS CHAMBER | 1 | |
| SM3-5 | HEAT CHAMBER | 1 | |
| SPL-17800 | SERVICE EQUIPMENT - SHOCK STRUT LOWER CHAMBER, MLG | 1 | |
| SPL-18139 | STRUT INFLATION - LOWER CHAMBER, MLG | 1 | |
| SU-222 | TEST CHAMBER | 1 | |
| SU222 | TEST CHAMBER | 1 | |
| T-084174250 | REFLECTOR TOOL CHAMBER | 1 | |
| TB3044G001 | TOOL FOR REMOVAL OF COMBUSTION CHAMBER | 1 | |
| TC880005 | ANECHOIC CHAMBER | 1 | |
| TH3-PE | TEMPERATURE AND HUMIDITY CHAMBER | 1 | |
| TJR 942 | ENVIRONMENTAL CHAMBER | 1 | |
| VACUUM CHAMBER | VACUUM CHAMBER | 1 | |
| VQPWA77176 | COLLAR, COMBUSTION CHAMBER OUTER REAR CASE (OPTIONAL) | 1 | |
| YA-111 | ZERO FLUX CHAMBER 2 " | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
