| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| CF6-80C2 | CF6-80C2 | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) G71001-181 | Bootstrap Eqpt - CF6-80C2B Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G78003-53 | SLING EQPT FAN REVERSER CF6-80C2B ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| 017610P33 | GUIDE CF6-80C2 | 1 | |
| 110059-501 | UNIVERSAL BASE STAND, CF6-80C2B7F | 3 | |
| 110350-501 | STAND,SHIP,ENGINE LOW PROFILE (HYD BASE) CF6-80C2B7F | 2 | |
| 111325-2 | CRADLE - ENGINE, CF6-80C2 ENGINE | 1 | |
| 111325-3 | CRADLE - ENGINE, CF6-80C2 ENGINE | 1 | |
| 140159-6 | BASE FOR CF6-80C2 ENGINES | 1 | |
| 14965 | A NALYZER, ENGINE TRIM BALANCE CF6-80C2 | 1 | |
| 2C14130G08 | FIXTURE, ENGINE MODULE LIFT CF6-80C2. | 2 | |
| 2C14130G09 | FIXTURE, ENGINE MODULE LIFT CF6-80C2 | 3 | |
| 2C14138G01 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 11 | |
| 2C14138G02 | FIXTURE REMOVAL MATING SEAL RINGS ACC GEARBOX CF6-80C2 | 12 | |
| 2C14155P06 | SPL-20451 - COVER PLATE - IDG, GE CF6-80C2 ENGINE | 1 | |
| 2C14726G03 | FWD ADAPTOR SET PEDESTAL CF6-80C2 | 1 | |
| 2C14729G01 | ADAPTOR SET PEDESTAL -ENG.AFT CF6-80C2 | 4 | |
| 2C14963G04 | NGINE TRIM BALANCE KIT CF6-80C2 FADEC (CABLES) | 1 | |
| 2C14965P01 | ANALYZER - TRIM BALANCE, CF6-80C2 ENGINE | 1 | |
| 2C14965P02 | ANALYZER - TRIM BALANCE, CF6-80C2 ENGINE | 1 | |
| 2C14974G01 | UNIT, ENGINE PRESERVATION HMU CF6-80C2 | 1 | |
| 2C14974G02 | UNIT, ENGINE PRESERVATION HMU CF6-80C2 | 2 | |
| 2C14975 | TEST CELL FILTER CF6-80C2 | 1 | |
| 2C15066 | (RT) FIXTURE - CF6-80C2 ONLY | 1 | |
| 2C15618G01 | CF6-80C2 OEM FIXTURE | 1 | |
| 2C6388G06 | BORESCOPE - FIBER OPTIC, CF6-80A/A2 AND CF6-80C2B ENGINES, INTRINSICALLY SAFE (APPROVED FOR USE IN CLASS I, DIVISIONS I & II HAZARDOUS LOCATIONS) | 1 | |
| 2C6388G07 | BORESCOPE - FIBER OPTIC, CF6-80A/A2 AND CF6-80C2B ENGINES, INTRINSICALLY SAFE (APPROVED FOR USE IN CLASS I, DIVISIONS I & II HAZARDOUS LOCATIONS) | 1 | |
| 3195E-01 | CF6-80C2 ENGINE STAND | 1 | |
| 3195 | CF6-80C2 Engines | 5 | |
| 3195D-01 | CF6-80C2 ENGINE STAND | 1 | |
| 47001-008-000 | CF6-80C2 PEDESTAL ADAPTER KIT | 1 | |
| 767-GE-CF6-2V | COVER INLET (ENGINE CF6-80C2) | 1 | |
| 80C2720901K1M1TK | No.4RB CF6-80C2 Radial Clearance Adapter | 1 | |
| 80C2720901K2M1TK | No.6RB CF6-80C2 Radial Clearance Adapter | 1 | |
| 98D54503000000 | HOLD OPEN SET - THRUST REVERSER COWL, CF6-80C2B ENGINE | 22 | |
| A20004-68 | SET - RIG PIN, CF6-80A AND CF6-80C2B ENGINES | 12 | |
| A24010 | DISPATCH EQUIPMENT IDG,CF6-80A AND CF6-80C2 ENGINE | 1 | |
| A24010-1 | DISPATCH EQUIPMENT - INTEGRATED DRIVE GENERATOR (IDG), CF6-80A AND CF6-80C2 ENGINES | 4 | |
| A27011-263 | BOOTSTRAP KIT CF6-80C2 | 1 | |
| A27063-107 | ADAPTER CABLE - TLA (FOR FADEC GE-CF6-80C2F ENGINES) | 2 | |
| A36004 | INSTALLATION EQPT CF6-80C2B BALL JOINT | 1 | |
| A36004-15 | INSTALLATION EQUIPMENT - CF6-80C2B BALL JOINT | 6 | |
| A36004-20 | INSTALLATION EQUIPMENT - CF6-80C2B BALL JOINT | 6 | |
| A54001-165 | SLING - STRUT UNLOAD SLING, ENGINE ON-WING, CF6-80C2 | 3 | |
| A54001-168 | SLING - STRUT UNLOAD SLING, ENGINE ON-WING, CF6-80C2 | 10 | |
| A54003-42 | SLING EQUIPMENT - STRUT REMOVAL AND INSTALLATION (CF6-80C2) | 13 | |
| A71011-263 | BOOTSTRAP ENGINE CHANGE CF6-80C2B | 1 | |
| A71011-332 | Bootstrap Equipment -General Electric Engine Cf6-80C2B | 11 | |
| A71035-27 | CUBIERTA PARA CF6-80C2B B-747/300 | 10 | |
| A71035-28 | CUBIERTA PARA CF6-80C2B B-747/300 | 1 | |
| A71051-1 | TRANSPORTATION AND STORAGE PALLET - INLET COWL, CF6-80C2B ENGINE | 1 | |
| A73002 | WRENCH MAIN ENGINE CONTROL CF6-80C2 REMOVAL AND INSTALLATION | 1 | |
| A73002-10 | WRENCH - MAIN ENGINE CONTROL, CF6-80C2 REMOVAL/INSTALLATION | 7 | |
| A78013-11 | SLING EXHUASTS SLEEVE CF6-80C2 | 6 | |
| A78013-22 | SLING - EXHAUST NOZZLE, 747/PW4000 OR 767/CF6-80C2 | 8 | |
| A78013-38 | SLING - EXHAUST NOZZLE, 747/PW4000 OR 767/CF6-80C2 | 2 | |
| A78017-1 | SLING - CORE COWL, CF6-80C2B ENGINE | 7 | |
| A78018 | SLING – THRUST REVERSER TRANSLATING SLEEVE, CF6-80C2 | 1 | |
| A78018-11 | SLING - THRUST REVERSER TRANSLATING SLEEVE, CF6-80C2 | 12 | |
| AEK-B767-0002 | COVER - INLET FOR CF6-80C2 ENGINE | 1 | |
| AIC0277-A01 | COVER - INLET FOR CF6-80C2 ENGINE | 1 | |
| AM-1928-155 | CF6-80C2 Base and Cradle Assembly (Top Level) | 5 | |
| AM-1928-156 | CF6-80C2 Base and Cradle Assembly (Top Level) | 6 | |
| AM-1928-156-80C2A | CF6-80C2 CRADLE WITH A300/310 | 1 | |
| AM-1928-900 | ADAPTER, BOOTSTRAP, CF6-80C2 | 1 | |
| AM-1994 | BASE-CF6-80A+CF6-80C2 ENGINE HANDLING | 1 | |
| AM-2265 | CF6-80C2 Base and Cradle Assembly (Top Level) | 1 | |
| AM-2305 | MD-11 BOOTSTRAP FOR CF6-80C2, MANUAL | 1 | |
| AM-2538 | CF6-80C2 Base and Cradle Assembly (Top Level) | 1 | |
| AM1928 | CF6-80C2 BASE AND CRADLE | 1 | |
| AM1928-155 | AGSE ENGINE STAND - CF6-80C2B1F | 5 | |
| AM1928-156 | CF6-80C2B/F ENGINE TRANSPORTATION STAND, WITH FITTINGS FOR BOOTSTRAP | 6 | |
| AM2690-1500 | CF6-80C2 ENGINE BASE | 1 | |
| B747-103 | INTAKE COVERS, GE CF6-80C2 engine, Equiv. to P/N: RSE-101A Forward Engine Cover (set of 4) | 1 | |
| B747-150 | INTAKE PLUGS, GE CF6-80C2 (single fold style) (set of 4) | 1 | |
| B747-205 | BYPASS VENT, & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines (set of 16) | 1 | |
| B747-206 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines (Single Nacelle) (set of 4) | 1 | |
| B747-209 | EXHAUST NOZZLE CAPS, GE CF6-80C2 Engines (set of 4) | 1 | |
| B767-115 | INTAKE COVERS, GE CF6-80C2 engine, attaches to bypass trailing edge with padded hooks (set of 2) | 1 | |
| B767-116 | INTAKE COVERS, GE CF6-80C2 engine, attaches to nacelle with ball lock pins in existing holes (set of 2) | 1 | |
| B767-201 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines, includes nozzle cover (set of 8) | 1 | |
| B767-203 | BYPASS VENT & TURBINE EXHAUST PLUGS, GE CF6-80C2 Engines (Single Nacelle) (set of 3) | 1 | |
| B78001-2 | Dispatch Lock Kit 757, 767 x/CF6-80C2B & 747-400 w/PW4000 Engines | 17 | |
| CF6-80C2 | CF6-80C2 Engine Stand | 3 | |
| CF6-80C2 & 80A2 STAND | CF6-80C2 & 80A2 STAND | 1 | |
| CF6-80C2 & 80A2 | CF6-80C2 & 80A2 Engine Stand | 1 | |
| CF6-80C2 & 80A2 Engine Stand | CF6-80C2 & 80A2 Engine Stand | 1 | |
| CF6-80C2 & A2 | CF6-80C2 & A2 | 1 | |
| CF6-80C2 & A2 | CF6-80C2 & A2 | 1 | |
| CF6-80C2 ENGINE STAND | CF6-80C2 ENGINE STAND | 1 | |
| CF6-80C2 Engine Stand | CF6-80C2 Engine Stand | 1 | |
| CF6-80C2 Fwd Arm 17" (OEM) | CF6-80C2 Fwd Arm 17" (OEM) | 1 | |
| CF6-80C2 Inlet Cover | COVER - INLET, CF6-80C2 ENGINE | 1 | |
| CF6-80C2 STAND | CF6-80C2 STAND | 6 | |
| CF6-80C2 TR | CF6-80C2 THRUST REVERSER | 1 | |
| CF6-80C2(OEM) | CF6-80C2(OEM) Engine Stand | 1 | |
| CF6-80C2(OEM) Engine Stand | CF6-80C2(OEM) Engine Stand | 1 | |
| CF6-80C2-ENGINE-ROLL-STAND | CF6-80C2 (ROLL STAND) ENGINE STAND | 1 | |
| CF6-80C2D1F | CF6-80C2D1F | 3 | |
| DZZ7318-1 | SLING-T/R CF6-80C2 | 1 | |
| DZZ7340-501 | support cf6-80c2 fan and core cowl doors hold open | 1 | |
| DZZ7349-1 | Support-CF6-80C2 Thrust reverser door actuator | 2 | |
| DZZ7349-501 | Actuator Support- CF6-80C2 | 1 | |
| F70023-1 | CF6-80C2 Engine Stand Base | 1 | |
| FB71002-34 | CF6-80C2 ENG STAND FWD ADPATOR ASSY (B767/B744) | 1 | |
| FB71002-48 | CRADLE ASSY CF6-80C2 ENGINE | 2 | |
| FTN-00249-00 | COVER - INLET FOR CF6-80C2 ENGINE | 1 | |
| G24005-24 | DISPATCH EQUIPMENT - INTEGRATED DRIVE GENERATOR (IDG), CF6-80C2 ENGINE | 4 | |
| G26009-88 | Plug Kit (CF6-80C2B) | 2 | |
| G28018-33 | Fitting assy CF6-80C2/PW4000/GENX-2B | 2 | |
| G28018-6 | FITTING ASSEMBLY - MANIFOLD, FUEL FEED (GENX-2B, CF6-80C2, PW4000, OR GE9X ENGINES) | 4 | |
| G28018-65 | Fitting assy CF6-80C2/PW4000/GENX-2B/GE9X | 3 | |
| G29003-8 | DISPATCH EQUIPMENT - ENGINE DRIVEN HYDRAULIC PUMP, CF6-80C2 | 5 | |
| G54007-93 | MOUNT, BASE PLATE - CF6-80C2 ENGINE | 6 | |
| G54008-68 | REMOVAL/INSTALLATION KIT, FUSE PIN - PW4000 AND CF6-80C2 ENGINES | 5 | |
| G71001 | BOOTSTRAP EQPT -0 CF6-80C2B ENGINE | 1 | |
| G71001-141 | Bootstrap Equipment CF6-80C2B | 1 | |
| G71001-181 | BOOTSTRAP EQUIPMENT - CF6-80C2B ENGINE | 15 | |
| G71001-181-M | BOOTSTRAP EQPT CF6-80C2B | 1 | |
| G71002 | CRADLE-CF6-80C2B ENGINE | 1 | |
| G71002-1 | HOLD OPEN EQUPT. CF6-80C2 | 1 | |
| G71002-45 | Engine Cradle, CF6-80C2B Engine | 1 | |
| G71002-48 | CRADLE - CF6-80C2B ENGINE | 10 | |
| G71007 | SLING EQPT-INLET COWL CF6-80C2B ENGINE | 1 | |
| G71007-28 | SLING EQUIPMENT - INLET COWL, CF6-80C2B ENGINE | 12 | |
| G71008-1 | PROOF LOAD EQUIPMENT - CRADLE, CF6-80C2B ENGINE | 1 | |
| G71010-68 | SLING, CF6-80C2 | 1 | |
| G71010-80 | Sling - Eng Hand CF6-80C2B | 9 | |
| G71012-107 | LOCATING JIG - ENGINE BUILD-UP TO STRUT, CF6-80C2B ENGINE | 1 | |
| G71012-116 | LOCATING JIG -0 EBU TO STRUT, CF6-80C2B ENGINE | 1 | |
| G71012-138 | LOCATING JIG - ENGINE BUILD-UP TO STRUT, CF6-80C2B ENGINE | 1 | |
| G71012-139 | LOCATING JIG - ENGINE BUILD-UP TO STRUT, CF6-80C2B ENGINE | 1 | |
| G71012-140 | LOCATING JIG - ENGINE BUILDUP TO STRUT, CF6-80C2B ENGINE | 1 | |
| G71012-141 | LOCATING JIG - ENGINE BUILDUP TO STRUT, CF6-80C2B ENGINE | 1 | |
| G71013 | SLING-FAN COWL CF6-80C2B ENGINE | 1 | |
| G71013-1 | SLING - FAN COWL, CF6-80C2B ENGINE | 10 | |
| G71022 | HOLD OPEN EQPT-ENGINE FAN/CORE COWL,CF6-80C2B | 1 | |
| G71022-54 | HOLD OPEN EQUIPMENT - ENGINE FAN/CORE COWL, CF6-80C2B | 9 | |
| G76001 | PIN SET -0 RIGGING, ENGINE CONTROLS, CF6-80C2 | 1 | |
| G76001-1 | PIN SET - RIGGING, ENGINE CONTROLS, CF6-80C2 | 1 | |
| G78002 | HOLD OPEN SET-THRUST REVERSER COWL,CF6-80C2B ENGINE | 1 | |
| G78002-1 | HOLD OPEN SET - THRUST REVERSER COWL, CF6-80C2B ENGINE | 14 | |
| G78002-3 | HOLD OPEN TOOL CF6-80C2B | 1 | |
| G78003 | SLING EQPT-FAN REVERSER,CF6-80C2B ENGINE | 1 | |
| G78003-53 | SLING EQUIPMENT - FAN REVERSER, CF6-80C2B ENGINE | 14 | |
| G78003-64 | SLING EQUIPMENT - FAN REVERSER, CF6-80C2B ENGINE | 1 | |
| G78006 | DOLLY-THRUST REVERSER CF6-80C2 ENGINE | 1 | |
| G78006-74 | DOLLY - THRUST REVERSER, CF6-80C2 ENGINE | 10 | |
| G78006-75 | DOLLY - THRUST REVERSER, CF6-80C2 ENGINE | 10 | |
| GE8094 | CF6-80C2 ENGINE STAND | 1 | |
| J10007-56 | ADAPTER EQUIPMENT - ENGINE BALLAST WEIGHT (767 CF6-80C2) | 1 | |
| J54001-74 | MOUNT, BASE PLATE - (CF6-80C2 AND CF6-80A ENGINES) | 4 | |
| J78006-74 | DOLLY, T/R, CF6-80C2 | 1 | |
| JMP-CF6-D-4037 | CF6-80C2 ENGINE WASH X2 PROBE TOOL | 1 | |
| JMP/CF6/D/4037 | Engine Probe Boeing 747/767 CF6-80C2 | 1 | |
| JMP/CF6/D/4037/BRACKETS | (Port & Starboard) CF6-80C2 Engine Probe Brackets Only | 1 | |
| JMP/CF6/D/4037/FITTINGS | (Port & Starboard) CF6-80C2 Engine Probe Fittings Only | 1 | |
| JMP/CF6/D/4037/TUBES | (Port & Starboard) CF6-80C2 Engine Probe Tubes Only | 1 | |
| JMP/CF6/D/6418 | Engine Probe (MDC)MD-11, Airbus A300, A310 CF6-80C2 D1F/A5F/A5/A3 | 1 | |
| JMP/CF6/D/6511 | Engine Probe Boeing 747/767, Airbus A330-200, (MDC)MD-11, Airbus A300-600F, Airbus A310-200F CF6-80C2, CF6-80E1, CF6-80C2 D1F, CF6-80C2 A5F, CF6-80C2 A3 | 1 | |
| JMPCF6D4037 | PROBES - SHORT, WATER WASH, CF6-80C2 ENGINE | 1 | |
| JXHK-GB-1245 | CF6-80C2 ENGINE STAND | 1 | |
| K10003-21 | Dispatch equipment-idg，CF6-80C2 engine | 1 | |
| LMC18G87 | Cover - Inlet, CF6-80C2 Engine | 4 | |
| LMC18G87-K | COVER INLET CF6-80C2 ENGINE SET OF 2 | 1 | |
| LMC18G87B | COVER CF6-80C2 ENGINE INLET | 1 | |
| LMC18G87B/LMC19G87 | COVER CF6-80C2 ENGINE SET | 1 | |
| LMC19G87 | Cover - Inlet, CF6-80C2 Engine | 4 | |
| LMC19G87. | COVER CF6-80C2 ENGINE EXHAUST | 4 | |
| LMC24G87 | PLUG - DISCHARGE, CF6-80C2 ENGINE FAN THRUST REVERSER AIR | 2 | |
| LMC24G87-1 | Plug - Discharge, CF6-80C2 Engine Fan Thrust Reverser Air (LEFT) | 1 | |
| LMC24G87-2 | Plug - Discharge, CF6-80C2 Engine Fan Thrust Reverser Air (RIGHT) | 1 | |
| NGCF68200 | CF6-80C2 ENGINE STAND | 2 | |
| NGCF68300 | CF6-80C2 ENGINE STAND | 2 | |
| NGCF68400 | CF6-80C2/E1 ENGINE STAND | 2 | |
| RFENGSTDCF680ACX1 | CF6-80C2 Stand | 1 | |
| RSE1021-3 | DOLLY-NOSE COWL (CF6-80C2, FADEC AND NONE FADEC) | 1 | |
| RSE1028 | CF6-80C2 Fan Cowl Dolly | 2 | |
| RSE1037 | Pin Locating Fan & Core Cowl Hinges (CF6-80C2) | 4 | |
| RSE1039 | CF6-80C2 Core Cowl Dolly | 2 | |
| RSE1196 | ALIGNMENT TOOL (CF6-80C2) | 2 | |
| RSE1197 | ALIGNMENT TOOL (CF6-80C2) | 1 | |
| S7E06B767PVC8XXXRED1 | COVER - INLET FOR CF6-80C2 ENGINE | 1 | |
| SMIG277CR80 | CF6-80C2 ENGINE CRADLE - B747 & A300/310 TO BE USED WITH TROLLEY TMH ET06 OR ET07 | 1 | |
| TMH BS58 | Hold Open Brace - CF6-80C2 (Superceedes 98A71101506001) | 1 | |
| TMH EC07 | Engine Cradle 90 - CF6-80C2/E1 | 1 | |
| TMH EC07-00-00 | ENGINE CRADLE 90 - CF6-80C2/E1 | 2 | |
| TMH EC08-00-00 | Engine Cradle 90 - CF6-80C2 | 2 | |
| TMHBS58 | Hold Open Brace - CF6-80C2 (Superceedes 98A711015 | 1 | |
| TMHBS58-00 | Hold Open Brace - CF6-80C2 (Superceedes 98A711015 | 1 | |
| TMHBS58-00-00 | BRACE-HOLD OPEN COWLS (GE CF6-80C2) | 2 | |
| TMHEC07-00-00 | ENGINE CRADLE 90 - CF6-80C2/E1 | 2 | |
| TMHEC08-00-00 | ENGINE CRADLE 90 - CF6-80C2 | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
