| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1C9608P05 | CENTER SHAFT | 1 | |
| 2C14199P29 | CENTER SHAFT | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 061018Y | SHAFT CENTERING TOOL | 1 | |
| 109-3401-61-101 | T.R.D SHAFT HANGER BEARING CENTERING | 1 | |
| 10C1224G01 | FIXTURE, CENTERING - LPT SHAFT (CENTERING FIXTURE) | 1 | |
| 1C9401P01 | COLLAR MID SHAFT, CENTERING AND SUPPORT | 1 | |
| 1J12433 | MASTER, SHAFT SETTING - HOUSING, PTO CENTER BRG, INTERMEDIATE | 1 | |
| 278-1T4 | PUMP SHAFT CENTERING MANDRIL | 1 | |
| 2C14199P29 | SHAFT CENTER | 1 | |
| 350A34-3020-01 | CENTER SHAFT SECTION TUBE ASSEMBLY | 1 | |
| 703А94-0015-04 | TOOL FOR CENTERING THE TAIL ROTOR DRIVE SHAFT | 1 | |
| 8011457-508 | CENTERING SHAFT CRIMPING TOOL | 1 | |
| 856A 2711G01 | FIXTURECENTER LPT SHAFT | 11 | |
| 856A 2758G02 | FIXTURE CENTERING LPT. SHAFT | 6 | |
| 856A-2616-G01 | Sector, Centering, LPT Shaft | 5 | |
| 856A1041G | FIXTURE CENTERING LPT SHAFT TO LPT | 1 | |
| 856A211 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A211 REV B | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A2315G02 | SECTOR CENTER LPT SHAFT FWD | 1 | |
| 856A2543 | CENTERING FIXTURE - LPT SHAFT MODULE | 2 | |
| 856A2543 G02 | Fixture Centering ‐ LPT Shaft Module | 7 | |
| 856A2543G02 | CENTERING FIXTURE - LPT SHAFT | 7 | |
| 856A2569 | SUPPORT, CENTERING - LPT SHAFT FORWARD | 1 | |
| 856A2569G01 | SUPPORT, CENTERING - LPT SHAFT FORWARD | 1 | |
| 856A2616 | SECTOR CENTER LPT SHAFT FWD | 1 | |
| 856A2616 G01 | Sector ‐ Center LPT Shaft Fwd | 5 | |
| 856A2616G01 | Sectors, Centering - Forward LPT Shaft (centering sectors) | 5 | |
| 856A2711 | FIXTURE, CENTERING LPT SHAFT MODULE;G01 | 1 | |
| 856A2711G01 | CENTERING FIXTURE - LPT SHAFT | 11 | |
| 856A2711G03 | CENTERING FIXTURE - LPT SHAFT | 1 | |
| 856A2757G01 | FIXTURE, CENTERING LPT SHAFT MODULE | 3 | |
| 856A2758 | FIXTURE, CENTERING - LPT SHAFT TO LPT (CENTERING FIXTURE) | 1 | |
| 856A2758G01 | FIXTURE, CENTERING - LPT SHAFT TO LPT (CENTERING FIXTURE) | 1 | |
| 856A2758G02 | FIXTURE, CENTERING - LPT SHAFT TO LPT (CENTERING FIXTURE) | 6 | |
| 856A2758G02 | FIXTURE CENTERING LPT SHAFT TO LPT | 6 | |
| 856A2789G01 | CENTERING RING - LPT SHAFT AFT ROTATING AIR SEAL | 1 | |
| 856A2789G02 | CENTERING RING - LPT SHAFT AFT | 4 | |
| 856A2950 | FIXTURE, CENTER - LPT SHAFT (CENTERING FIXTURE) | 1 | |
| 856A2950G0 | FIXTURE, CENTERING - LPT SHAFT MODULE | 1 | |
| 856A2950G01 | CENTERING FIXTURE - LPT SHAFT | 10 | |
| 856A3706 | SECTOR CENTERING LPT SHAFT FWD | 1 | |
| 856A3706G01 | Sector Centering LPT Shaft Fwd End | 6 | |
| 856A3750 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A3750G01 | Fixture Center LPT Shaft | 2 | |
| 856A3750G02 | FIXTURE, CENTERING LPT SHAFT MODULE | 13 | |
| 856A3750G04 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856A3792 | CENTERING FIXTURE - LPT SHAFT/LPT | 1 | |
| 856A3792G01 | CENTERING FIXTURE - LPT SHAFT/LPT | 6 | |
| 856А3750 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 856А3750G02 | FIXTURE, CENTERING LPT SHAFT MODULE | 1 | |
| 8C2452 | FIXTURE, CENTERING-LPT SHAFT | 1 | |
| 956A7017 | FIXTURE - GUIDE & CENTER - BOOSTER SHAFT TOOLS | 1 | |
| ABL-.030-6/1-3MHZ | EDDY CURRENT BLADE PROBE, STRAIGHT SHAFT, .030"(7.62mm) THICK, 1-3MHz WITH A 2MHz CENTER FREQUENCY, 6.0"(152.4mm) LONG SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test report and Certificate of Conformance. | 1 | |
| AF-5055 | HIGH FREQUENCY DIFFERENTIAL BLADE PROBE, 50-500KHZ(200KHz CENTER FREQUENCY), TRIAX FISCHER CONNECTOR, 6.0" LONG, FLEXIBLE SHAFT, .060" FLAT (THICK), SHIELDED. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5141/TF | CUSTOM EDDY CURRENT PENCIL PROBE(DELRIN - BLACK ACETAL), STRAIGHT SHAFT WITH THE COIL CENTERED AT THE TIP .250"Ø, 50-500KHz UNSHIELDED WITH TRIAX FISCHER CONNECTOR, 3.0: LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5142 | Rigid Surface Probe Abs Unhielded, 200KHz Center Frequency, 50-500KHz operating range, .187"Ø Handle with .093"Ø Straight Shaft Metal 2.5" With Delrin Tip, 4.5" Total Length with Microdot Connector. Includes Test Report and Certificate of Conformance. ... | 1 | |
| AF-5459 | RIGID SURFACE PROBE 1-3MHz With a Center Frequency of 2MHz, 90° Bent, .095"Ø Shaft, .433" Drop, 5.0" Long Supplied with a Triax Fischer Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-453-6/2M | RIGID SURFACE PROBE ABSOLUTE SHIELDED, 45° DEGREES, .125"Ø SHAFT, .300" DROP, 1-3MHz WITH A CENTER FREQUENCY OF 2MHz, 6.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-903-6/500K/7L | Absolute Shielded / Bridge Pencil Probe. , 200 kHz - 1 MHz with a center frequency of 500 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length supplied with a 7 Pin Fischer/LEMO "PowerLink" connector. Includ | 1 | |
| APN-95-5/2M | RIGID SURFACE PROBE, 90° DEGREES, .500" DROP, .125"Ø SHAFT, 1-3 M HZ. WITH A 2 MHZ CENTER FREQUENCY, 5.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| APN-95-5B/200K-1M | Detachable pencil probe, bent, Absolute shielded . Operates on a 200KHz-1MHz frequency range and has a center frequency of 500KHz. Right angle shaft with a 0.50 inch (12.7mm) drop and a total length of 5 inches (12.7cm) Supplied with a microdot connec... | 1 | |
| APN-95-6/7L | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. I | 1 | |
| APNU-5/2M | RIGID STRAIGHT SURFACE PROBE, .125"Ø SHAFT, UNSHIELDED, 1-3 MHZ WITH A 2 MHZ CENTER FREQUENCY, 5.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE | 1 | |
| APNU-95-5/500K | RIGID SURFACE PROBE, UNSHIELDED, 200 KHZ-1 MHZ WITH A 500 KHZ CENTER FREQUENCY, 90°, .125"Ø SHAFT, .500" DROP , 5.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| AXPN-45-5/1-3MHZ | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1-3MHz frequency range and has a center frequency of 2MHz. 45 degree angle shaft with a 0.50" (12.7mm) drop and a 0.072" (1.83mm) diameter tip. Total length of 5" (127mm). I... | 1 | |
| C27085-19 | Center Shaft Pin | 1 | |
| EAA0349G05A | EXTENDED CENTER SHAFT KIT | 1 | |
| F27448000 | CENTERING SHAFT CRIMPING TOOL | 1 | |
| IAE1J12387 | STAND WORK FAN ROTOR CENTER LPC STUB SHAFT INTERMEDIATE | 1 | |
| T302837 | CENTER SHAFT AND PISTON | 1 | |
| T5736-2 | TOOL, PUMP SHAFT CENTERING | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
