| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98F24208245244 | CE PLATE | 1 | |
| CS-295-AG13707A | CE PLATE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0U145395 | MAINTENANCE PLATE | 1 | |
| 1-16454-1 | LH AFT UPPER FIXATION (TEMPLATE TO CENTER WING) | 1 | |
| 1-16454-2 | RH AFT UPPER FIXATION (TEMPLATE TO CENTER WING) | 1 | |
| 1-16454-3 | LH FWD LOWER FIXATION (TEMPLATE TO CENTER WING) | 1 | |
| 1-16454-4 | RH FWD LOWER FIXATION (TEMPLATE TO CENTER WING) | 1 | |
| 1-16454-5 | LH AFT LOWER FIXATION (TEMPLATE TO CENTER WING) | 1 | |
| 1-16454-6 | RH AFT LOWER FIXATION (TEMPLATE TO CENTER WING) | 1 | |
| 1-16456 | TAPERED GUIDE BOLT (FIXATION TEMPLATE CENTER WING) | 1 | |
| 10-10073 | Bowers Surface Plate 300x300X50mm Grade 0 | 1 | |
| 10-10074 | Bowers Surface Plate 300x300x50mm Grade 1 | 1 | |
| 10-10075 | Bowers Surface Plate 300x300x50mm Grade 2 | 1 | |
| 10-10077 | Bowers Surface Plate 450x300X75mm Grade 0 | 1 | |
| 10-10078 | Bowers Surface Plate 450x300x75mm Grade 1 | 1 | |
| 10-10079 | Bowers Surface Plate 450x300x75mm Grade 2 | 1 | |
| 10-10081 | Bowers Surface Plate 450x450X75mm Grade 0 | 1 | |
| 10-10082 | Bowers Surface Plate 450x450x75mm Grade 1 | 1 | |
| 10-10083 | Bowers Surface Plate 450x450x75mm Grade 2 | 1 | |
| 10-10085 | Bowers Surface Plate 600x450x75mm Grade 0 | 1 | |
| 10-10086 | Bowers Surface Plate 600x450x75mm Grade1 | 1 | |
| 10-10087 | Bowers Surface Plate 600x450x75mm Grade 2 | 1 | |
| 10-10089 | Bowers Surface Plate 600x600x75mm Grade 0 | 1 | |
| 10-10090 | Bowers Surface Plate 600x600x75mm Grade 1 | 1 | |
| 10-10091 | Bowers Surface Plate 600x600x75mm Grade 2 | 1 | |
| 369 | REFERENCE PLATE NDT | 2 | |
| 520 | PADDLE TYPE ORIFICE PLATE 3 FOR FLANGE ORIFICE FITTING , LINE SIZE 3 , OUTSIDE DIAMETER 5.875 , # 600, PLATE THICKNESS 1/8 , INNER DIAMETER 1.375, MANUFACTURER: DANIEL, CATALOG NO. 520, USED TO MEASURE GAS INJECTION FLOW RATE. | 1 | |
| 147732 | SPACER PLATE | 1 | |
| 232804 | SURFACE PLATE | 1 | |
| 1010081 | BOWERS SURFACE PLATE 450X450X75MM GRADE 0 | 1 | |
| 1012024 | SURFACE PLATE | 1 | |
| 10539031-1 | PLATE, SURFACE | 1 | |
| 109-3130-01-121 | AGUSTA T/R - TOOL, TR, STATIC BALANCE - PLATE ASSY | 1 | |
| 10QNPD | 10Q NUT PLATE DRILL WITH ACCESORIES (RECOULES) | 1 | |
| 1159F7E20853-1 | EPR PROBE SEALING PLATE WITH ACCESSORIES | 1 | |
| 18193-10 | TOOL FOR THREADING HOLES NECESSARY FOR INSTALLATION OF HELICOIL INSERTS IN THE TORQUE PLATE | 3 | |
| 2000489 | LOCKING PLATE (EATON AEROSPACE) | 1 | |
| 2001752 | aircraft tire service trailer built to accommodate at least (2) aircraft tires, jacks, etc. Heavy duty chassis and running gear with 8000 lb. capacity and pneumatic tires. Diamond Plate Floor. Customization for specific aircraft tires available upon reque | 1 | |
| 23054809 | Plate – Puller, Seal Runner, Spacer & Bearing Fan Shaft | 2 | |
| 0292100190 | ONE-PIECE REAR PLATE | 1 | |
| 0292100220 | ONE-PIECE REAR PLATE | 1 | |
| 0319771380 | REINFORCEMENT PLATE | 1 | |
| 2004749-5550 | BAR SPACER PLATEFORM | 1 | |
| 2024540-1 | Orifice Plate | 1 | |
| 2146.10.02.00 | CENTERING PLATE | 1 | |
| 24003-9 | SKID PLATE – BATTERY REPLACEMENT MAX (SPL-1633) | 1 | |
| 25FN535 | PLATE SERRATED, CENTER | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 2C14199P103 | CENTER PLATE | 1 | |
| 2C7086P03 | DRILL PLATE, IGV CENTER DRILL FIXTURE | 1 | |
| 2MIT2A264-0812-1 | ADAPTER PLATE - 40 TO 65 GALLON TANK (737NG ALL, 767 OPTIONAL AUX TANK SEE OPTIONS BELOW) (YOKOHAMA AEROSPACE AMERICA) | 5 | |
| 301 GUIDE | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION | 1 | |
| 302 GUIDE | BOEING REFERENCE STANDARD GUIDE PLATE KC10 FUEL COMPENSATOR CUTOUT-INSPECTION | 1 | |
| 30R0324P01 | (RT) TEMPLATE, INLET DEVICE PERFORATION | 1 | |
| 350A93-3316-20 | ROTATING PLATE REPLACEMENT | 2 | |
| 350A93-3316-20/PHP | ROTATING PLATE REPLACEMENT | 1 | |
| 365A93-3363-20 | CENTER PLATE EXTRACTOR | 1 | |
| 36X36AA | 36"X36" SURFACE PLATE | 1 | |
| 36x60x6-A0 | Black Granite Surface Plate - A Grade | 1 | |
| 3791011-1 | Spring Scale Centering Adapter Plate | 1 | |
| 3791011-1PM | SPRING SCALE CENTERING ADAPTER PLATE | 1 | |
| 381540TF1-6 | LOAD LIMITER REPLACEMENT PLATE | 1 | |
| 3G5351A08152 | LH SPOT FACED PLATE | 1 | |
| 3G5351A08252 | RH SPOT FACED PLATE | 1 | |
| 3G6230A02034 | CENTERING PLATE ASSY | 1 | |
| 4-40-M30RW-2.5-304SS | FLOW MEASURING SECTION (FIXED ORIFICE, 55 TO 65 LB/MIN (24.9 TO 29.5 KG/MIN), RECOMMEND 6.0 INCHES (152.4 MM) LINE WITH 2.0 INCHES (50.8MM) ORIFICE PLATE) | 1 | |
| 4106T04P01 | ACCESSORY GEARBOX COVER PLATE | 1 | |
| 419300TF1-6 | LOAD LIMITER REPLACEMENT PLATES | 1 | |
| 46-1582-1 | SPACE PLATE | 1 | |
| 460006596 | CENTRES CHECKING PLATE | 1 | |
| 48-60-04-627M1 | FRONT FACE PROTECTION PLATE | 1 | |
| 4920-01-168-1313 | SPRING SCALE CENTERING ADAPTER PLATE | 1 | |
| 4920-99-285-3601 | SURFACE PLATE | 1 | |
| 510AG | PLATEFORME ÉLÉVATRICE JLG (MODEL : 510AG) | 1 | |
| 5163A43 | WRENCH SET:COMBINATION TYPE:RATCHETING BOX SIZE:3/8 INCH - 3/4 INCH OPEN SIZE:3/8INCH - 3/4INCH STYLE:12- POINT MATL:CHROME PLATED NUMBER OF PIECES:10 PIECES CONT:PLASTIC WRENCH:COMBINATION STANDARD SET IN INCHES TOOLS - HAND / POWER :STANDARD SET IN INCH | 1 | |
| 517-101_300X300X100 | SURFACE PLATE (STONE) | 1 | |
| 517-103C | GRANITE SURFACE PLATE | 1 | |
| 517-111 | BLACK GRANITE SURFACE PLATE | 1 | |
| 517-901-0 | Mitutoyo 517-901-0 Granite Surface Plate 300 x 200 x 65mm Grade 0 | 1 | |
| 517-901-1 | Mitutoyo 517-901-1 Granite Surface Plate 300 x 200 x 65mm Grade 1 | 1 | |
| 517-902-0 | Mitutoyo 517-902-0 Granite Surface Plate 300 x 300 x 65mm Grade 0 | 1 | |
| 517-902-1 | Mitutoyo 517-902-1 Granite Surface Plate 300 x 300 x 65mm Grade 1 | 1 | |
| 517-903-0 | Mitutoyo 517-903-0 Granite Surface Plate 450 x 300 x 75mm Grade 0 | 1 | |
| 517-903-1 | Mitutoyo 517-903-1 Granite Surface Plate 450 x 300 x 75mm Grade 1 | 1 | |
| 517-904-0 | Mitutoyo 517-904-0 Granite Surface Plate 450 x 450 x 75mm Grade 0 | 1 | |
| 517-904-1 | Mitutoyo 517-904-1 Granite Surface Plate 450 x 450 x 75mm Grade 1 | 1 | |
| 517-905-0 | Mitutoyo 517-905-0 Granite Surface Plate 600 x 450 x 75mm Grade 0 | 1 | |
| 517-905-1 | Mitutoyo 517-905-1 Granite Surface Plate 600 x 450 x 75mm Grade 1 | 1 | |
| 517-906-0 | Mitutoyo 517-906-0 Granite Surface Plate 600 x 600 x 75mm Grade 0 | 1 | |
| 517-906-1 | Mitutoyo 517-906-1 Granite Surface Plate 600 x 600 x 75mm Grade 1 | 1 | |
| 517-907-0 | Mitutoyo 517-907-0 Granite Surface Plate 750 x 600 x 100mm Grade 0 | 1 | |
| 517-907-1 | Mitutoyo 517-907-1 Granite Surface Plate 750 x 600 x 100mm Grade 1 | 1 | |
| 517-908-0 | Mitutoyo 517-908-0 Granite Surface Plate 900 x 600 x 100mm Grade 0 | 1 | |
| 517-908-1 | Mitutoyo 517-908-1 Granite Surface Plate 900 x 600 x 100mm Grade 1 | 1 | |
| 517-909-0 | Mitutoyo 517-909-0 Granite Surface Plate 900 x 600 x 100mm Grade 0 with stand | 1 | |
| 517-909-1 | Mitutoyo 517-909-1 Granite Surface Plate 900 x 600 x 100mm Grade 1 with stand | 1 | |
| 517-910-0 | Mitutoyo 517-910-0 Granite Surface Plate 900 x 900 x 125mm Grade 0 with stand | 1 | |
| 517-910-1 | Mitutoyo 517-910-1 Granite Surface Plate 900 x 900 x 125mm Grade 1 with stand | 1 | |
| 517-911-0 | Mitutoyo 517-911-0 Granite Surface Plate 1200 x 600 x 100mm Grade 0 with stand | 1 | |
| 517-911-1 | Mitutoyo 517-911-1 Granite Surface Plate 1200 x 600 x 100mm Grade 1 with stand | 1 | |
| 517-912-0 | Mitutoyo 517-912-0 Granite Surface Plate 1200 x 900 x 125mm Grade 0 with stand | 1 | |
| 517-912-1 | Mitutoyo 517-912-1 Granite Surface Plate 1200 x 900 x 125mm Grade 1 with stand | 1 | |
| 517-913-0 | Mitutoyo 517-913-0 Granite Surface Plate 1200 x 1200 x 150mm Grade 0 with stand | 1 | |
| 517-913-1 | Mitutoyo 517-913-1 Granite Surface Plate 1200 x 1200 x 150mm Grade 1 with stand | 1 | |
| 517-914-0 | Mitutoyo 517-914-0 Granite Surface Plate 1500 x 1000 x 150mm Grade 0 with stand | 1 | |
| 517-914-1 | Mitutoyo 517-914-1 Granite Surface Plate 1500 x 1000 x 150mm Grade 1 with stand | 1 | |
| 517-915-0 | Mitutoyo 517-915-0 Granite Surface Plate 1500 x 1200 x 150mm Grade 0 with stand | 1 | |
| 517-915-1 | Mitutoyo 517-915-1 Granite Surface Plate 1500 x 1200 x 150mm Grade 1 with stand | 1 | |
| 517-916-0 | Mitutoyo 517-916-0 Granite Surface Plate 2000 x 1000 x 150mm Grade 0 with stand | 1 | |
| 517-916-1 | Mitutoyo 517-916-1 Granite Surface Plate 2000 x 1000 x 150mm Grade 1 with stand | 1 | |
| 517-917-1 | Mitutoyo 517-917-1 Granite Surface Plate 2000 x 1200 x 150mm Grade 1 with stand | 1 | |
| 517-918-0 | Mitutoyo 517-918-0 Granite Surface Plate 2400 x 1200 x 200mm Grade 0 with stand | 1 | |
| 517-918-1 | Mitutoyo 517-918-1 Granite Surface Plate 2400 x 2100 x 200mm Grade 1 with stand | 1 | |
| 5290020-4 | Cessna Model 401/402 Calibration Standard Figure 4 part 2 & 3 Inspection. Plate A - 7075-T6 Aluminum and Plate B - 2024-T3 Aluminum. | 1 | |
| 540615-1 | SPACER, CONTOUR TEMPLATE | 1 | |
| 55-02-090-AA95-SURF2 | AA95-SURF2 FACE PLATE | 1 | |
| 57-10-102/3 | REFERENCE PLATE NDT | 1 | |
| 57-10-102/4 | REFERENCE PLATE NDT | 1 | |
| 629-7730-002 | SIGNAL GENERATOR FACEPLATE ASSY. | 1 | |
| 666P463 | SURFACE PLATE | 1 | |
| 6723040 | FACE PLATE ADAPTER | 1 | |
| 6775211M57 | MASTER ORIFICE PLATE (PARKER) | 1 | |
| 6796202 | PULLER PLATE ACCESSORY DRIVE | 1 | |
| 6796203 | PULLER PLATE - ACCESSORY MAIN DRIVE SHAFTGEAR BEARINGS | 2 | |
| 6796204 | PULLER PLATE - ACCESSORY MAIN DRIVE SHAFT BEARING | 4 | |
| 6796205 | PULLER PLATE - SIDE ACCESSORY DRIVE SHAFT GEAR BEARINGS | 3 | |
| 6796211 | INSTALLATION PLATE -ACCESSOR Y BEARINGS | 1 | |
| 6796524 | PLATE-PULLER, GEN DRIVE SHAFT ASSY BRG INNER RACE | 2 | |
| 6796930 | Plate â Installation, Accessory Gear Box Bearing | 2 | |
| 6797132 | PULLER PLATE - CENTER ACCY DRIVE | 1 | |
| 6797757 | PLATE - PULLER, TORQUEMETER MIDBEARING INNER RACE | 3 | |
| 6893515 | PLATE, PULLER 12MM X 37MM X 12MM BEARING ACCESSORIES GEAR BOX | 2 | |
| 6893517 | PLATE- 12 Plate â 12mm x 28mm x 8mm Bearing Puller, Accessory Gear Box | 2 | |
| 6893521 | PLATE, 15MM X 42MM X 13MM BEARING PULLER, ACCESS GEAR BOX | 2 | |
| 6893525 | Plate â Installation, Accessory Gear Box Bearings | 2 | |
| 6897008 | FACE PLATE ADAPTER | 1 | |
| 6F6230G09431 | CENTERING PLATES INSTALLATION | 1 | |
| 703A95-0300-00 | PLATEFORME DE MAINTENANCE | 1 | |
| 76113 | 8 PIECE NUT PLATE JIG SET BOX KI | 1 | |
| 709082 | HOLDING PLATE FOR VICE | 1 | |
| 747-033 | NOSEPIECE, 3/32 NUT PLATE | 1 | |
| 762538 | PLATE-SPLICE TURBINE FAN DUCT | 1 | |
| 7947479-10 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 3 | |
| 7947479-10 I | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/17-4PH | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/304SS | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 8-690 | FACEPLATE | 1 | |
| 81101-R815505 | INSPECTION ZONE TEMPLATES (FACE SIDE) | 1 | |
| 81602-R815505-0001 | INSPECTION ZONE TEMPLATE (FACE SIDE) | 1 | |
| 828487-1 | WRENCH, ORIFICE PLATE SUPPORT ASSEMBLY | 1 | |
| 834628-1 | Spring Scale Centering Adapter Plate | 1 | |
| 834628-1PM | SPRING SCALE CENTERING ADAPTER PLATE | 1 | |
| 836/4M | JAW PLATES(1 SET/4 PCE) | 1 | |
| 856A2762G02 | Fixture - Balance Baseplate (balance baseplate) | 1 | |
| 856A3458G01 | BASEPLATE - STATIC LPT BLADED DISKS BALANCE | 1 | |
| 856A3728 | ACCESSORY GEARBOX SEALING PLATE | 1 | |
| 905954-1-1 | TRIM BALANCE DRILL TEMPLATE | 1 | |
| 956A8435 | FIXTURE - BALANCE BASEPLATE LPT BLADED DISK | 1 | |
| 96 | PLASTIC JAW PLATES(1 SET/2 PCE) | 1 | |
| 8805 | PLASTIC JAW PLATES(1 SET/2 PCE) | 1 | |
| 925932-3 | WRENCH, ORIFICE PLATE | 1 | |
| 94927 | SPACER PLATE | 1 | |
| 98221K | SURFACE PLATE PROBE TYPE K | 1 | |
| 9895603803 | TEMP PLATE ACCESSORY KIT | 2 | |
| 98A54603004203 | TEMPLATE CENTERING PIN | 1 | |
| 98D71203001206 | ORDONANCE PLATE | 1 | |
| 98D71203001208 | ORDONANCE PLATE | 1 | |
| 98L53103004210 | PLATE OF MAINTENANCE | 1 | |
| 98L57104030000 | RIB SPLICE PLATE | 1 | |
| 98S53505006000 | PRESS. PLATE FR. 25 / FR. 27-INTERNAL SURFACE | 4 | |
| 993003 | FACE PLATE | 3 | |
| 99D53103002000 | Reference Standard Template | 1 | |
| 99D57204197000 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 57-29-11-PB6 PG.11. MATERIAL: ABM3-1031(7150-T6 AL), ABM3-1029(7050-T7 AL). Includes Test Report and Certificate of Conformance. Note: Repair Plate = .236" | 1 | |
| 99V57103002000 | Airbus Calibration Block A350-A-571100-AFAPE3-04J2E-A-001-01 Sheet 01 Page 1-2. Material: Ti-6Al-4V ANNEALED PLATE. Includes Test Report and Certificate of Conformance. | 1 | |
| A20001-28 | Center Plate | 1 | |
| A32047-2 | Wrench assy-orifice plate | 1 | |
| AFC-550BCS | SINGLE ELEMENT FINGER TIP END MOUNT BNC CONTACT TRANSDUCER 5.0MHZ, .500"Ø ELEMENT WITH CERAMIC WEAR PLATE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2068 | CUSTOM CORROSION TEST PLATE 7075-T6 ALUMINUM. , 5%, 10%, 20%. PLATE SIZE: 8.0" x 5.0" x .125". 1.0"Ø SPOTFACE 3 PLACES. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (SELECTED RIVETS). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.201 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.201" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.500D | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.500" DIAMETER HOLE D SHAPE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.812 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.812" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.950 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.950" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-1.06 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (1.06" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2161/4130 | 10 STEP CARBON STEEL WEDGE. STEP THICKNESS OF: 1.10", 1.20", 1.30", 1.40", 1.50", 1.60", 1.70", 1.80", 1.90" 2.00" +/-.001". 0.75" x 0.75" Step Pad Face. Material: 4130 Carbon Steel, Nickel Plated. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3019S | CUSTOM AIR FORCE EDDY CURRENT BOLT HOLE STANDARD PER CUSTOMER SUPPLIED DRAWING, 1/4" 8630 STEEL PLATE (4130 EQUIVALENT ALTERNATIVE). EDM: 0.030 x 0.030 CORNER NOTCH. HOLE DIAMETER= 0.437Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3032 | 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 2024-T3 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 5/32", 3/16" and 1/4" TOTAL OF 3 EDM NOTCHES .040" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. | 1 | |
| AFNDT-3032-1 | 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 7075-T6 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 3/16", 7/32" and 1/4" TOTAL OF 3 CORNER EDM NOTCHES: .030" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. Includes Tes | 1 | |
| AFNDT-3055 | EDDY CURRENT SURFACE REFERENCE STANDARD. Low Hydrogen Embrittlement Cadmium-Titaniium Alloy Plating per BAC5804. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .010", .020", .050". NOTCH WIDTH: (.007" +/- .002"). MATERIAL: 4330 STE... | 1 | |
| AFNDT-3112 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T3 Aluminum. Plate Size: 2.0" x 4.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112/2014-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2014-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112/2024-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3113 | Custom Bolt hole Standard, Hole Size; 5/8"Ø inch diameter Hole. .020" Thru EDM notch .005" Wide(+/- .001"). Material: 7075-T6 Aluminum. Plate Size: 2.0" x 2.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3147AL | 7 HOLE 100° COUNTERSINK REFERENCE STANDARD 2024-T3 ALUMINUM, PLATE SIZE: 3.0" x 2.5" x 3/8" . HOLE SIZES: 5/32", 3/16", 7/32",1/4", 5/16",3/8", 7/16". TOTAL OF 7 EDM NOTCHES .030" +0.002"/-0.002" Long x .007" Max Width Through the Depth of the Countersin | 1 | |
| AFNDT-3152CS | 5 Step Wedge Manufactured in Accordance with ASTM E797/E797M-15.Step Sizes: .100", .200",. 350", .500", 1.000" MATERIAL: 1018 Carbon Steel. Pad Size: 0.750" X 0.750" TOLEREANCE = +/- .002. NICKEL PLATED CORROSION RESISTANT COATING. Includes measure... | 1 | |
| AFNDT-3166AL | CUSTOM 13 HOLE REFERENCE 3 PLATE STANDARD, 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3309AL | Custom Thin Plate Surface Standard. 7075-T76 Aluminum 10.0" x 10.0" x .050". 3 Surface EDM Notches ±.001" on Width. 1.) 0.010" x 0.200" x .004"W 2.) 0.015" x 0.200" x .004"W 3.) 0.020" x 0.200" x .004"W. Includes Test Report and Certificate of Conform | 1 | |
| AFNDT-3348/4340 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 4340 Steel (Nickle Plated for Corrosion Protection). Includes Test Report and Certificate of Conformance. Manu | 1 | |
| AFNDT-3457 | EDDY CURRENT SURFACE REFERENCE STANDARD. Cadmium plated on one side to AMS-QQ-P-416-f Type 1, Class 2. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .008", .020", .040". NOTCH WIDTH: (.004"W +/- .002). MATERIAL: 4340 STEEL. SIZE: 1. | 1 | |
| AFNDT-3499 | EDDY CURRENT SURFACE REFERENCE STANDARD. Low Hydrogen Embrittlement Cadmium-Titaniium Alloy Plating per BAC5804. 4 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .005", .010", .020", .050". NOTCH WIDTH: (.007" +/- .002"). MATERIAL: 4... | 1 | |
| AFNDT-3551CS | 7 HOLE REFERENCE STANDARD in 4340 Steel; Hole Sizes: .875", 1.000", 1.100", 1.200", 1.300", 1.400", 1.500"), With a .030" x .030" x .004" ± .001" Corner EDM Notch in top and bottom of each hole in the top plate. 14 Notches Total. Includes Engraving, ... | 1 | |
| AGE11731 | Seal Plate Surface Protector | 2 | |
| AGE11731PM | SEAL PLATE SURFACE PROTECTOR | 1 | |
| AGE12973 | SEAL PLATE MATING SURFACE PROTECTOR | 2 | |
| AGE14908 | ASSEMBLY, PULLER, CENTER PLATE | 1 | |
| ALUMINIUM SPACER PLATE | ALUMINIUM SPACER PLATE | 1 | |
| AT154R-42 | FACE PLATE | 1 | |
| AT55721 | Orifice plate torque reactor | 1 | |
| AT55722 | Orifice nut and plate assembly tool | 1 | |
| AT55768 | PLATE-ORIFICE | 1 | |
| B76003-4 | TEMPLATE, T/R FORCE | 1 | |
| BA-747-033 | NOSEPIECE, 3/32 NUT PLATE | 1 | |
| BAT3518-KIT12 | 12 Piece Nutplate Jig Kit | 2 | |
| BHS6061-T6/C2 | Bombardier Bolt hole and surface crack reference standard 6061-T6, 15 Holes, .030 Midwall notches top plate, (2) .030 corner notches each hole on the bottom plate. .008, .020, .030 surface notches | 1 | |
| BL3.5 | B/Plate Anti Ice | 1 | |
| C0045 | Checkplate LH And RH Aileron Trim/Balance Tab | 1 | |
| C02683A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 3.250'' TALL X 1.250" WIDE X 15.50" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| C02699A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 6.250'' TALL X 1.250" WIDE X 24.00" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| C24002-105 | Center Plate | 1 | |
| C24002-16 | Center Plate | 1 | |
| C24003-9 | SKID PLATE – BATTERY REPLACEMENT | 6 | |
| C27044-5 | SPACER, HEEL PLATE | 1 | |
| C27065-23 | Plate Spacer Assy | 1 | |
| C44001-1 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 3 | |
| C44001-48 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 3 | |
| C44001-55 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 5 | |
| C44001-58 | REMOVAL/INSTALLATION EQUIPMENT - LIFTING STRAP ANTENNAS/ ADAPTER PLATE/RADOME (CE) | 6 | |
| C6045 | SURFACE PLATE(주철정반) | 1 | |
| CEL 30119-1-67C | MASTER ORIFICE PLATE | 1 | |
| COTS | SQUARE METAL GROUND PLATE 1 M (39.37 IN) BY 1 M (39.37 IN) WITH A MALE 50 Ω TNC SOCKET IN ITS CENTER (ELTA) | 1 | |
| DRT172889 | FACE PLATE BALANCE WEIGHT | 1 | |
| EEBC400-FR | FRENCH LABEL FACEPLATE | 1 | |
| EEBC400-S | SPANISH LABEL FACEPLATE | 1 | |
| EEBC400F-E | ENGLISH LABEL FACEPLATE | 1 | |
| EEBC400F-FR | FRENCH LABEL FACEPLATE | 1 | |
| EEBC400F-S | SPANISH LABEL FACEPLATE | 1 | |
| EEBC400INT-D | DUTCH LABEL FACEPLATE | 1 | |
| EEBC400INT-E | ENGLISH LABEL FACEPLATE | 1 | |
| EEBC400INT-F | FRENCH LABEL FACEPLATE | 1 | |
| EEBC400INT-G | GERMAN LABEL FACEPLATE | 1 | |
| EEBC400INT-I | ITALIAN LABEL FACEPLATE | 1 | |
| EEBC400INT-S | SPANISH LABEL FACEPLATE | 1 | |
| EEBC500-E | ENGLISH LABLE FACEPLATE | 1 | |
| EEBC500B-E | ENGLISH KEYPAD FACEPLATE | 1 | |
| EEBC500B-F | FRENCH KEYPAD FACEPLATE | 1 | |
| EEBC500B-S | SPANISH KEYPAD FACEPLATE | 1 | |
| EEBC500BINT-D | DUTCH KEYPAD FACEPLATE | 1 | |
| EEBC500BINT-E | ENGLISH KEYPAD FACEPLATE | 1 | |
| EEBC500BINT-F | FRENCH KEYPAD FACEPLATE | 1 | |
| EEBC500BINT-G | GERMAN KEYPAD FACEPLATE | 1 | |
| EEBC500BINT-I | ITALIAN KEYPAD FACEPLATE | 1 | |
| EEBC500BINT-S | SPANISH KEYPAD FACEPLATE | 1 | |
| EEBC500INT-E | ENGLISH LABEL FACEPLATE | 1 | |
| EEBC500INT-F | FRENCH LABEL FACEPLATE | 1 | |
| EEBC500INT-I | ITALIAN LABEL FACEPLATE | 1 | |
| EEBC500INT-S | SPANISH LABEL FACEPLATE | 1 | |
| ET.28 | Bombardier Bolt hole and surface crack reference standard 6061-T6, 15 Holes, .030 Midwall notches top plate, (2) .030 corner notches each hole on the bottom plate. .008, .020, .030 surface notches | 1 | |
| F71215-1 | FUEL CELL COVER PLATE | 1 | |
| F71215-13 | FUEL CELL COVER PLATE | 1 | |
| F71215-14 | FULL CELL COVER PLATE | 1 | |
| F71215-18 | FUEL CELL COVER PLATE | 1 | |
| F71215-5 | FUEL CELL COVER PLATE | 1 | |
| F71215-6 | FUEL CELL COVER PLATE | 1 | |
| F71215-7 | FUEL CELL COVER PLATE | 1 | |
| F72761 | WRENCH -0 MAIN GEAR ORIFICE PLATE TORQUE USED TO | 1 | |
| F72764 | WRENCH ORFICE PLATE | 2 | |
| F72764-500 | WRENCH ORFICE PLATE | 4 | |
| F80032-1 | ADAPTER - WRENCH, MAIN GEAR SHOCK STRUT ORIFICE PLATE | 7 | |
| Figure 4.E.-4 | Honeywell Positioning Plate and Spacers, 32-49-01 page 4.E.-5. Includes Test Report and Certificate of Conformance. | 1 | |
| G-29 | Cherry Aerospace G-29 Cherry 332 Nut-Plate Hand Riveter | 3 | |
| G-30 | Cherry Aerospace G-30 CherryLock A Code Nut-Plate Hand Riveter | 2 | |
| G0142710005 | KIT, AILERON BALANCE TABS CHECK TEMPLATES | 1 | |
| G27052-18 | Splice plate assy，outbd，RH | 1 | |
| G29 | Cherry® G29 Nut-Plate Hand Riveter (Stroke: 3/4") (Pulling force: 1,000 lbs (454 kgs)) (Add to cart: Add To Cart) | 3 | |
| G670726000-1 | AGB HYDRAULIC PUMP PAD BLANK-OFF PLATE REMOVE AND REPLACED WITH ITEM 29-00-00-011 | 1 | |
| G702A | G702A Lightweight Nut Plate (Stroke: 3/4") (Pulling force: 1,100 lbs (499 kgs)) (Add to cart: Add To Cart) | 2 | |
| G902 | G902 Lightweight Nut Plate Power Riveters (Stroke: .75") (Pulling force: 550 lbs (250 kgs)) (Add to cart: Add To Cart) | 1 | |
| G902-15 | G902 Lightweight Nut Plate Power Riveters (Stroke: .75") (Pulling force: 550 lbs (250 kgs)) (Add to cart: Add To Cart) (Stroke: .75") (Pulling force: 550 lbs (250 kgs)) (Add to cart: Contact us to order) | 1 | |
| GGGP453 | SURFACE PLATE | 1 | |
| GRANITE/HAMBLING | GRANITE SURFACE PLATE | 1 | |
| GS 23440-1 | BALANCE FIXTURE PLATE | 11 | |
| GS23440-1 | PLATE, BALANCE FIXTURE | 11 | |
| GS234401 | BALANCE FIXTURE PLATE | 11 | |
| GS24151-1 | INSPECTION ZONE TEMPLATES (FACE SIDE) | 1 | |
| HS7182 | INSTALLER-ORIFICE PLATE | 1 | |
| HU38411 | SEQUENCE PLATE | 1 | |
| HU87112 | LOCATOR-CENTRALIZE PLATE PIVOT DOOR | 1 | |
| HU87112-1 | LOCATOR-CENTRALIZE PLATE PIVOT DOOR | 8 | |
| HU87112-2 | LOCATOR -CENTRALISES INTERMEDIATE PLATE OF RVT | 2 | |
| ITCUPSA-AB | AB END FORCE PLATES | 1 | |
| ITCUPSA-CD | CD END FORCE PLATES | 1 | |
| J54001-75 | DIAG. BRACE - BASEPLATE | 4 | |
| K32024-4 | ORIFICE PLATE NUT SPANNER ASSEMBLY | 2 | |
| K602075 | LUMINANCE TEMPLATE | 1 | |
| KAMHMP | MONITOR PLATE ACCESSORY | 1 | |
| KB132L1459-000 | RUDDER PEDAL LOAD CELL KIT LOAD CELL , PEDAL PLATE & GAUGE | 1 | |
| M10DE0103/104-160B0 | SIDE FORK CENTRE DISTANCE TEMPLATE | 1 | |
| MIL-G-87964 | PLATE,SURFACE | 1 | |
| N14723 | SLIDE CEMENTING PLATE | 1 | |
| NDT1087-11 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.140 / Lower 2 - 0.080. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-12 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.120 / Lower 2 - 0.063. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-13 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.140 / Lower 2 - 0.063. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1087-14 | BOEING REFERENCE STANDARD, 757 Part 6 53-00-11. Plate Thickness: Upper 1 - 0.160 / Lower 2 - 0.100. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT1106-1 | Boeing Reference Standard composite..737 PT4 51-00-05 PG 5-6 FG 1 With top plate thickness of .060", .080" .100".. | 1 | |
| NDT3092 | REFERENCE PLATE | 2 | |
| NDT4251 | BOEING REFERENCE STANDARD 747 Part 4 57-30-11 Page 11 Figure 2. Material: Aircraft Qualtiy Alimunim Plate, Any 2024 and 7075. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-1 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-2 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-3 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-4 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6025-5 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6025-6 | BOEING REFERENCE STANDARD 767 PART 4 57-50-17 FIGURE 2 PAGE 6. MATERIAL MUST BE MANUFACTURE OUT OF 7075-T6 PLATE WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 2 | |
| OU145395 | MAINTENANCE PLATE | 1 | |
| PS468-21 | FACEPLATE | 1 | |
| PWA16364 | FRONT BALANCE PLATE INSTALLATION FICTURE | 1 | |
| PWA26243A | PLATE - HPC, RUNOUT BUILD CHUCK CENTL_[PWA26243A] | 1 | |
| PWA85274 | PLATE-ROLLER BEARING INNER RACE, PMA | 1 | |
| PWA86345 | PLATE - DISASSEMBLY, GEARBOX, ROLLER BEARING INNER RACE (VARIOUS) | 1 | |
| Phoenix ISL Wren 4" ToFD Scanner | Phoenix ISL Wren 4" ToFD Scanner - ToFD Scanner, Operates in any orientation on surfaces from 3” pipe up to flat plate, Ideal for site use in areas with minimum access | 1 | |
| RB T102085 | Bearing Removal & Anti Torque Device Plate Assembly | 1 | |
| RB6796930 | Accessory Gear Box Install Plate | 2 | |
| RB6893515 | Plate, Puller 12Mm X 37Mm X 12Mm Bearing Accessories Gear Box | 2 | |
| RB6893517 | Plate, Puller 12Mm X 28Mm X 8Mm Bearing Accessories Gear Box | 2 | |
| RB6893521 | Plate, 15Mm X 42Mm X 13Mm Bearing Puller, Access Gear Box | 1 | |
| RB6893525 | Plate, Installation Access Gear Box Bearings | 2 | |
| RBE350A94-3700- | SWASHPLATE IMMOBILIZING TOOLS ADJUSTMENT BRACE | 1 | |
| RBE350A94-3700-A | Swashplate Immobilizing Tools Long Brace & Parts | 2 | |
| RBE350A94-3700-B | Swashplate Immobilizing Tool, Short Brace Assembly | 2 | |
| RBE350A94-3700-C | Swashplate Immobilizing Tools Adjustable Brace | 1 | |
| RBT18562 | Main Rotor Trunnion Bearing Inner Race Pressing Plate | 1 | |
| RRT029797 | SETTING PLATE SHROUD RECESS | 1 | |
| RRT051096 | SEQUENCE PLATE | 1 | |
| S-PLATE | SURFACE PLATE TOOL | 1 | |
| SB10270203-5 | Douglas Reference Standard, DC10-A27-203 - HT, CAD PLATE, PRIMER, GREY TOPCOAT | 1 | |
| SK15943 | ORIFICE PLATE | 1 | |
| SNP1125 | License Plate Frame | 1 | |
| ST-222 | PLATE, TORQUE HOLD-DOWN - ALL ENGINES EXCEPT O-235 SERIES | 2 | |
| ST62877 | TEMPLATE, ENGINE MAINTENANCE | 1 | |
| ST8870B-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870B-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATE. MATERIAL: BMS8-79 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 27 FIGURE 8. B737 NDT Part 1, 51-04-00. Includes C-Scan, Certification Report and Certificate of Conformance. | 3 | |
| ST8870C-7 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 1-10 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870C-8 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 11-20 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| ST8870C-9 | BOEING REFERENCE STANDARD, COMPOSITE LAMINATE STEP WEDGE WITH HOLDING PLATEBMS8-139 FIBERGLASS( 21-30 PLY), PT 1 51-04-00, PAGE 28 FIGURE 8. Includes C-Scan, Certification Report and Certificate of Conformance. | 2 | |
| STDA3 | ALUMINUM A3 CERTIFIED COATED METAL PLATES STANDARD | 1 | |
| SURFACE-TABLE | SURFACE PLATE TOOL | 1 | |
| T101504 | PLATE ASSEMBLY, BEARING REMOVAL, ACCESSORY DRIVE | 1 | |
| T112601 | Orifice Plate | 1 | |
| T555-2 | PLATE: SPACER,CABLE TENSIOMETE, RISER #1 | 3 | |
| T555-4 | PLATE: SPACER,CABLE TENSIOMET, RISER #3A, | 1 | |
| T555-6 | PLATE: SPACER,CABLE TENSIOMETE, RISER #3 | 5 | |
| T555-8 | PLATE: SPACER,CABLE TENSIOMETE, RISER #2C | 3 | |
| TB3029G001 | Surface Plate | 1 | |
| TEG-000886 | INOXIDABLE ACERO PLATE AERO 10949 | 1 | |
| TEK-186-2024T3-12 | 12 Hole Reference Standard Similar to Boeing 186, 3/16" to 3/4", with .030" corner and .020" corner notches on the bottom plate, .040 Long x .020 Deep Midwall Notches on the top plate. 2024-T3 | 1 | |
| TSF5T-52001-22 (IFREQ’D) | COVER PLATE, FORWARD ACCESS DOOR (IFREQ’D) | 1 | |
| UH60-315 | SWASH PLATE FOD BARRIER, padded for maintenance | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
