| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 161A1168-1 | CARRIER | 1 | |
| 162A1510-1 | CARRIER | 5 | |
| 4503225 | CARRIER | 1 | |
| 460005832-3 | CARRIER | 1 | |
| 460007328-4 | CARRIER | 1 | |
| BL1B | CARRIER | 1 | |
| CTGR8850-335 | CARRIER | 1 | |
| CTGRS8825-20 | CARRIER | 1 | |
| RB0006-814-00660-2 | Carrier | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| "PWC51063 | PULLER (SEAL CARRIER ) | 1 | |
| (CALIB) PWC37077 | ADAPTER CARRIER | 1 | |
| (CALIB) PWC37433 | BASE - SEAL CARRIER | 1 | |
| (CALIB) PWC38077 | PULLER CARRIER | 1 | |
| (CALIB) PWC38078 | DRIFT CARRIER | 1 | |
| (CALIB) PWC56036 | DRIFT - SEAL INTO CARRIER | 1 | |
| 01-0145-78 | 14AM MAGNAGLO AEROSOL, FLUORESCENT PREMIX W/ CARRIER II OIL (12X16 OUNCE PER BOX) (NDT MAGNETIC PARTICLE TEST) (CONSUMABLE) | 1 | |
| 01-0597-0000 | HEAD CARRIER | 10 | |
| 02-7837C0110 | JACK: TRIPOD,HYD,5TON,THIS PRODUCT CAN ONLY BE SHIPPED VIA LTL CARRIERS, FREIGHT METHODS WILL BE RESTRICTED. | 7 | |
| 02-7856C0100 | JACK: TRIPOD,HYD,CE,5TON,THIS PRODUCT CAN ONLY BE SHIPPED VIA LTL CARRIERS, FREIGHT METHODS WILL BE RESTRICTED. | 7 | |
| 02A7843C0112 | JACK: TRIPOD,25TON, STOCKED AT 1041THIS PRODUCT CAN ONLY BE SHIPPED VIA LTL CARRIERS, FREIGHT METHODS WILL BE RESTRICTED. | 6 | |
| 03A5800C0010 | TAILSTAND: TRIPOD JACK,W/ALARM, THIS PRODUCT CAN ONLY BE SHIPPED VIA LTL CARRIERS, FREIGHT METHODS WILL BE RESTRICTED. | 4 | |
| 06-4035-3600 | SVC UNIT: FL,HYD & OIL, 8GL,MANUAL HAND PUMPTHIS PRODUCT CAN ONLY BE SHIPPED VIA LTL CARRIERS, FREIGHT METHODS WILL BE RESTRICTED. | 10 | |
| 109-3130-80-101 | TOOL SET, 90° GEARBOX CASE CONE ASSY SEAL AND SEAL CARRIER REMOVAL/INSTALLATION - LIGA METALICA | 1 | |
| 109-3401-68-101 | TOOL SET, SEAL AND SEAL CARRIER OF FAN DRIVE QUILL | 1 | |
| 11C3347 | FIXTURE-I/R HPCR TUBE CARRIER | 1 | |
| 11C3347G02 | FIXTURE, INSTALL/REMOVE - HPC ROTOR TUBE CARRIER | 1 | |
| 11C3353 | FIXTURE - I/R-TUBE CARRIER RET NUT-HPCR | 1 | |
| 11C3353G03 | FIXTURE, INSTALL/REMOVAL - TUBE CARRIER RETAINING NUT - HPC ROTOR | 1 | |
| 142697 | 142697;Finish/FRMWR Assy; DAM Carrier | 1 | |
| 161A1167-4 | CARRIER ASSY-UPR BRG | 1 | |
| 161A1168-1 | CARRIER-LWR BRG | 1 | |
| 162A1510-1 | BEARING CARRIERè½´æ¿æ¯æ¶ | 5 | |
| 162A1511-4 | CARRIER ASSY-UPPER BRG | 1 | |
| 198-1790 | CARRIER, WIRE CUTTER | 1 | |
| 1R18041 | CARRIER, TRANSDUCER | 1 | |
| 2024292-1 | BEARING CARRIER PULLER | 1 | |
| 22640 | GEAR CARRIER 1/2-20 THD | 1 | |
| 22656B | GEAR CARRIER 1/2-20 THD | 1 | |
| 22659B | GEAR CARRIER 1/2-20 THD | 1 | |
| 22700 | GEAR CARRIER SCREWDRIVER NAT | 1 | |
| 22702B | GEAR CARRIER 6 TH .406 | 1 | |
| 23053661 | Wrench – Muted Bolt, Prop Shaft To Rear Carrier | 1 | |
| 244-609 | CARRIER AND LINING | 1 | |
| 244-610 | CARRIER AND LINING | 1 | |
| 25006-01AA | DATA CARRIER | 1 | |
| 281172 | Gear Carrier Holder | 1 | |
| 281874-1-1 | BEARING CARRIER PULLER | 1 | |
| 285160-2-1 | DUMMY BEARING CARRIER ASSY | 1 | |
| 289538-1 | HOLDER CARRIER INSTALLING | 1 | |
| 289571-1 | PULLER - MECHANICAL, PAWL CARRIER | 4 | |
| 289572-1 | PULLER MECHANICAL CARRIER | 1 | |
| 289747-1 | PULLER BEARING CARRIER | 1 | |
| 291767-1 | CARRIER PULLER | 1 | |
| 291866-1 | BEARING CARRIER MACHINING FIXTURE | 1 | |
| 291867-1 | BEARING CARRIER MACHINING FIXTURE | 1 | |
| 291953-1 | GEAR CARRIER | 1 | |
| 294530-1 | PAWL CARRIER MECHANICAL | 1 | |
| 294530-6 | ARM,PULLER,PAWL CARRIER | 1 | |
| 294892-1 | DRIVEN COMPRESSOR BEARING PULLER (REMOVES 3822099-1 BEARING AND 3826125-1 SEAL CARRIER FROM 3822075-2 MAIN SHAFT) | 1 | |
| 332А93-3191-00 | A TOOL FOR REMOVING THE UPPER STOP OF THE CARRIER SCREW | 1 | |
| 4049-10 | LAMP CARRIER | 1 | |
| 44804 | GEAR CARRIER 6TH SPLINE | 1 | |
| 44805 | GEAR CARRIER 9TH PINION | 1 | |
| 50856 | DRIFT SLEEVE CARRIER | 1 | |
| 5220-99-617-1716 | CLOCK CARRIER | 1 | |
| 532982-1 | Carrier-Output Stage Planet | 1 | |
| 600-4704-001 | CARRIER ADJUSTMENT TOOL | 1 | |
| 68816 | ADAPTER GEAR CARRIER | 1 | |
| 6791715 | Tube-Carrier | 1 | |
| 6795871 | Flyweight Carrier Fixture | 1 | |
| 6795873 | Roll-Pin Flyweight Carrier Fixture | 1 | |
| 6796472 | PULLER-PLANET GR REAR CARRIER BRG INNER RACE | 2 | |
| 6796565 | PUSHER, PLANET REAR CARRIER | 1 | |
| 6797031 | WRENCH REAR CARRIER NUT | 1 | |
| 6799615 | PROP SHAFT FLANGE TO REAR CARRIER FLANGE BOLT WRENCH | 3 | |
| 6799875 | REAR CARRIER WRENCH | 2 | |
| 6899907 | HOLDER - PLANET CARRIER | 1 | |
| 74315-15 | GEAR CARRIER 3/8-24 .2778 | 1 | |
| 74315-16 | GEAR CARRIER 3/8-24 .2683 | 1 | |
| 74315-17 | GEAR CARRIER 3/8-24 (.2583) | 1 | |
| 74315-176 | GEAR CARRIER 3/8-24 .2543 | 1 | |
| 74315-17SOT | GEAR CARRIER 3/8-24 | 1 | |
| 79211A | GEAR CARRIER ASSY 3.94 RAT | 1 | |
| 834443-1 | FAN PULLER (SUPPORTS 3826127-1 SEAL CARRIER DURING REMOVAL OF 3611175-1 SEAL ASSEMBLY SUPERSEDES 294880-1) | 1 | |
| 835106-1 | Carrier Puller | 1 | |
| 92625 | 92625;MECH ASSY; SBC CARRIER; BTCP; I7 | 1 | |
| 8547419 | APAWL CARRIER ALIGNMENT TOOL | 2 | |
| 83800138 | EPROM CARRIER | 1 | |
| A-31984 | CARRIER PLATE TORQUE ADAPTER | 1 | |
| A52029-1 | GAGE - GIRT BAR, CARRIER DRIVE | 3 | |
| A52029-2 | Gage-girtbarcarrier drive | 1 | |
| AID-00558 | CARRIER ASSEMBLY AID | 1 | |
| AID-00568 | CARRIER INSTALLATION TOOL | 1 | |
| AM2303 | AIR MEDICAL STRETCHER CARRIER | 1 | |
| AS350 | AS350 ATTACHMENT HOOKS FOR HELL CARRIER | 1 | |
| AS350 FLOATS | AS350 FLOATS ATTACHMENT HOOKS FOR HELICARRIER | 1 | |
| AT202-14 | PLANET GEAR CARRIER | 1 | |
| AT204A-7 | PLANET GEAR CARRIER 4MM | 1 | |
| AT3000-1 | CARRIER REAR BEARING | 1 | |
| AT3000-2 | CARRIER FRONT BEARING | 1 | |
| AT3000-28 | GEAR CARRIER | 1 | |
| AT5000-12 | FRONT GEAR CARRIER | 1 | |
| AT5000-13 | REAR GEAR CARRIER | 1 | |
| AT55715 | CARRIER-BEARING INSTALLATION, BLG | 1 | |
| AT55763 | CARRIER-BEARING, LWR INSTALLATION | 1 | |
| ATI800FG-3 | CSCR 5/8 CLUTCH CARRIER | 1 | |
| ATI800FG-4 | CSCR 3/8 CLUTCH CARRIER | 1 | |
| BDWBKH | BAC Multi-Carrier Hydraulic Ground Handling Wheel Set, 5.3 x 4.5-6 in, Orange, Powder-Coated | 3 | |
| BDWE130H | BAC Multi-Carrier Hydraulic Ground Handling Wheel Set, 5.3 x 4.5-6 in, Orange, Powder-Coated | 2 | |
| BDWMDH | BAC Multi-Carrier Hydraulic Ground Handling Wheel Set, 5.3 x 4.5-6 in, Orange, Powder-Coated | 2 | |
| BK5700-2 | CARRIER HEAT PLATE REAR LABEL | 1 | |
| BK7000-2 | MAIN PCBA CARRIER REAR LABELS | 1 | |
| BS2244 | BATTERY CARRIER SLING | 1 | |
| C32017-27 | CARRIER PULLER SCREW | 2 | |
| C32017-5 | CARRIER PULLER | 2 | |
| C32055-2 | Clamp Carrier Assembly | 1 | |
| C5CEBUNDLE | C5CEBUNDLE;TB/MTS5800 Carrier Ethernet - Capture/Decode and L4 with Truespeed to 10G - J-Proof/J-Profiler and Ethernet OAM | 1 | |
| C5CEBUNDLE-U1 | C5CEBUNDLE-U1;TB/MTS5800 Carrier Ethernet Software Bundle Field Upgrade Including Truespeed - Layer 4 - Up to 10G - Capture and Decode Up to 10G - J-Proof and Ethernet OAM | 1 | |
| CA5000-DMC | CA5000-DMC;Dual Module Carrier with Dummy Module for CellAdvisor 5G | 1 | |
| CLC1537 | 33 POCKET TOOL CARRIER | 1 | |
| CPWA-30046 | Puller, seal carrier | 1 | |
| CTCEBUNDLE-U1 | CTCEBUNDLE-U1;Carrier Ethernet Software Bundle Field Upgrade for TB/MTS6000A and TB/MTS 8000 10G MSAMS Including Capture/Decode TCP Wirespeed J-Proof J-Profiler and Ethernet OAM | 1 | |
| CTR2512-108 | GEAR CARRIER ASSY | 1 | |
| CTR714-160 | GEAR CARRIER ASSEMBLY | 1 | |
| CTS422R5A | CARRIER ASSY | 1 | |
| E2J65333 | GUIDE TOOL - PISTON RINGS, SEAL CARRIER, RB211-524G/H | 3 | |
| E57916-001 | SEAL CARRIER ASSEMBLY | 1 | |
| E6300ADD | E6300ADD;ADDITIONAL H. POWER FO-TRANSPORT MODULE CARRIER | 1 | |
| E81FMC1 | E81FMC1;ONA-800 Fiber Module Carrier for 8100-series modules | 1 | |
| E81FMC2 | E81FMC2;ONA-800 Fiber Module Carrier for new 8100-series modules | 1 | |
| Ex-92646 | Fixture-holding, rear carrier | 1 | |
| F27509000 | EXTRACTOR-EQUIPMENT CARRIER | 2 | |
| F27695000 | EBA Carrier Bushing R/I Tool | 1 | |
| F27696000 | EBA Carrier & Torque Tube Assy Tool | 1 | |
| FBP-SD4I-PRO | FBP-SD4I-PRO;KIT HD4I P5000I TIPS VFL CLEANING CARRIER CASE | 1 | |
| FBP-SD4IP-PRO | FBP-SD4IP-PRO;Kit - HD4IP P5000I Tips VFL Cleaning Carrier Case | 1 | |
| FC-6 | FIBER OPTIC LIGHT CARRIER | 2 | |
| FC6 | FIBER OPTIC LIGHT CARRIER | 2 | |
| FIT-8201-PRO | FIT-8201-PRO;KIT OLP-82 P5000I TIPS VFL CLEANING CARRIER CASE | 1 | |
| FIT-82P01-PRO | FIT-82P01-PRO;Kit OLP-82P P5000I Tips VFL Cleaning Carrier Case | 1 | |
| FIT-85P03-CATV | FIT-85P03-CATV;KIT OLP-85P HI POWER P5000I TIPS VFL CLEANING CARRIER CASE | 1 | |
| FIT-8736-R | FIT-8736-R;KIT OLP-87 P5000I 1310/1490/1550NM W/ SC-APC TIPS CARRIER BATTERY CASE | 1 | |
| FITP-UC4 | FITP-UC4;SmartClassFiber Carrier For Displays Without PCM | 1 | |
| FITP-UC4P | FITP-UC4P;SmartClassFiber Carrier For Displays With PCM | 1 | |
| FK16659 | CARRIER SEAL | 1 | |
| FNC/000-200 | UNIVERSAL CARRIER | 1 | |
| G52011 | GUIDE EQPT -0 CARRIER BEARING ASSY | 1 | |
| G52011-1 | Guide eqpt-carrier bearing assy | 1 | |
| GRABNGOBLK | GRABNGO TOOL CARRIER PROTECTOR | 1 | |
| Gedore-050507 | Gedore 050507 ATB5 G N.m 9x12 CARRIER - Adjustable Torque Wrenches, Range : 1-5 N.m | 1 | |
| Gedore-050512 | Gedore 050512 ATB5 G lbf.in 9x12 CARRIER - Adjustable Torque Wrenches, Range : 10-45 lbf·in | 1 | |
| Gedore-050527 | Gedore 050527 ATB2.5 G N.m 9x12 CARRIER - Adjustable Torque Wrenches, Range : 50-250 cN.m | 1 | |
| Gedore-050532 | Gedore 050532 ATB2.5 G lbf.in 9x12 CARRIER - Adjustable Torque Wrenches, Range : 4.5-22.5 lbf.in | 1 | |
| Gedore-050557 | Gedore 050557 ATB10 G N.m 9x12 CARRIER - Adjustable Torque Wrenches, Range : 2-10 N.m | 1 | |
| Gedore-050562 | Gedore 050562 ATB10 G lbf.in 9x12 CARRIER - Adjustable Torque Wrenches, Range : 20-90 lbf·in | 1 | |
| HT-400-SK | PT-6 Seal Carrier Tool (Twin-Pac) Remove And Install | 2 | |
| HU17006 | CLOCK CARRIER | 1 | |
| HU44811 | SEAL CARRIER ALIGNMENT TOOL, RB211-524G/H | 1 | |
| HU44811-1 | SEAL CARRIER ALIGNMENT TOOL, RB211-524G/H | 2 | |
| IAE1M14074 | CARRIER FIXTURE HEATING LPT TURBINE STG 3,4,5,6,7 | 1 | |
| IAE1R18041 | IAE 1R18041 TRANSDUCER CARRIER | 1 | |
| ISO 10511-M16 | NUT FOR CARRIER J-TOWSJ100 | 1 | |
| J27011-49 | Main plus carrier beam sling assy | 1 | |
| J32073-5 | GLAND CARRIER GUIDE | 1 | |
| J32073-8 | GLAND CARRIER GUIDE | 2 | |
| JD745B083 | JD745B083;RFoCPRI LTE-FDD multi carrier signal generator for JD745B | 1 | |
| JD745B084 | JD745B084;RFoCPRI LTE-TDD multi carrier signal generator for JD745B | 1 | |
| JD746B083 | JD746B083;RFoCPRI LTE-FDD multi carrier signal generator for JD746B | 1 | |
| JD746B084 | JD746B084;RFoCPRI LTE-TDD multi carrier signal generator for JD746B | 1 | |
| JD748B083 | JD748B083;RFoCPRI LTE-FDD multi carrier signal generator for JD748B | 1 | |
| JD748B084 | JD748B084;RFoCPRI LTE-TDD multi carrier signal generator for JD748B | 1 | |
| JD780B083-FL | JD780B083-FL;RFoCPRI LTE-FDD multi carrier signal generator float license JD740B/JD780B | 1 | |
| JD780B084-FL | JD780B084-FL;RFoCPRI LTE-TDD multi carrier signal generator float license JD740B/JD780B | 1 | |
| JD785B083 | JD785B083;RFoCPRI LTE-FDD multi carrier signal generator for JD785B | 1 | |
| JD785B084 | JD785B084;RFoCPRI LTE-TDD multi carrier signal generator for JD785B | 1 | |
| JD785BBBUE-B | JD785BBBUE-B;JD785B BBU Emulation with Multi-Carrier PIM Analysis for ATT | 1 | |
| JD786B083 | JD786B083;RFoCPRI LTE-FDD multi carrier signal generator for JD786B | 1 | |
| JD786B084 | JD786B084;RFoCPRI LTE-TDD multi carrier signal generator for JD786B | 1 | |
| JD788B083 | JD788B083;RFoCPRI LTE-FDD multi carrier signal generator for JD788B | 1 | |
| JD788B084 | JD788B084;RFoCPRI LTE-TDD multi carrier signal generator for JD788B | 1 | |
| LCTC2099 | BACKLASH FLAG - ACC DR CARRIER | 1 | |
| LIL57850 | BATTERY CARRIER | 1 | |
| LTCT14491-01 | Fixture, Carrier Assembly, Shaft Removal/Installation | 1 | |
| LTCT2086 | Removing Tool (Races from Carrier) | 1 | |
| LTCT7229-01 | Fixture, Carrier Assembly, Oil Target | 1 | |
| LTCT7632-01 | Fixture, Carrier Assembly, Oil Flow Target | 1 | |
| LTCT7675-01 | Kit, Carrier Locator Pins, Gage and Reaming | 1 | |
| ME2D9 | PIN, GEAR CARRIER | 1 | |
| OETOB | EMERGENCY TOW BAR FOR HELL CARRIER | 1 | |
| ONX-CATV-SW-FV-RSG | ONX-CATV-SW-FV-RSG;Software Option - Field View W/8 carrier RSG - OneExpert CATV | 1 | |
| PREPAYADDSHIPPING | All shipping carrier charge, tax & duty are the customer’s ultimate responsibility. The amount presented here is the best current information. If final carrier invoice exceeds amount charged at time of order processing, customer is responsible for balance | 1 | |
| PWC 37651 | PULLER (SEAL CARRIER) | 14 | |
| PWC30046-01 | Puller – Seal Carrier | 1 | |
| PWC30046-06 | Puller – Seal Carrier | 2 | |
| PWC30046-07 | Puller – Seal Carrier | 1 | |
| PWC30046-08 | Puller – Seal Carrier | 1 | |
| PWC30046-09 | Puller – Seal Carrier | 1 | |
| PWC30046-10 | Puller – Seal Carrier | 1 | |
| PWC30046-11 | Puller – Seal Carrier | 1 | |
| PWC30046-52 | PULLER - OIL SEAL CARRIER (MV7672-5-01) | 16 | |
| PWC30046-53 | Puller – Seal Carrier | 1 | |
| PWC30046-54 | Puller – Seal Carrier | 14 | |
| PWC30046-56 | Puller – Seal Carrier | 4 | |
| PWC30046-57 | Puller – Seal Carrier | 9 | |
| PWC30046-61 | Puller – Seal Carrier | 4 | |
| PWC30046-62 | Puller – Seal Carrier | 1 | |
| PWC30046-64 | Puller – Seal Carrier | 2 | |
| PWC30046-65 | Puller – Seal Carrier | 1 | |
| PWC30046-66 | Puller – Seal Carrier | 2 | |
| PWC30046-70 | PULLER (SEAL CARRIER ) | 3 | |
| PWC30052 | CARRIER PULLER | 6 | |
| PWC30075 | DRIFT STARTER GENERATOR OIL SEAL CARRIER | 11 | |
| PWC30463 | Base Gear Carrier - Pratt & Whitney Canada | 3 | |
| PWC30463 | Base Gear Carrier | 3 | |
| PWC30646 | PULLER - OIL SEAL CARRIER | 1 | |
| PWC30675 | PULLER CARRIER | 7 | |
| PWC32054 | Clamp Red. Gear Carrier | 1 | |
| PWC32323 | Pusher Carrier | 2 | |
| PWC32375 | Drift Seal Carrier | 7 | |
| PWC34006 | 2ND STG REDUCTION CARRIER PULLER | 2 | |
| PWC34021 | 1ST STG REDUCTION CARRIER SOCKET | 3 | |
| PWC34026 | 1ST STG REDUCTION CARRIER FIXTURE | 2 | |
| PWC34027 | DRIFT CARRIER | 2 | |
| PWC34029 | 1ST STG REDUCTION CARRIER NUT | 3 | |
| PWC34036 | Plug Carrier | 1 | |
| PWC34040 | FIXTURE CARRIER SET | 1 | |
| PWC34040-100 | FIXTURE CARRIER | 1 | |
| PWC34040-101 | FIXTURE CARRIER | 2 | |
| PWC36082 | BASE CARRIER | 4 | |
| PWC37077 | ADAPTER CARRIER | 10 | |
| PWC37077A | Adapter, Pulling, Oil Seal Carrier | 2 | |
| PWC37078 | DRIFT CARRIER | 11 | |
| PWC37088-2 | DRIFT,CARRIER, STARTER-GEN & FUEL PUMP | 7 | |
| PWC37247 | BASE CARRIER | 1 | |
| PWC37433 | BASE SEAL CARRIER | 10 | |
| PWC37434 | DRIFT, SEAL CARRIER | 9 | |
| PWC37510 | Puller, Angle Drive to Accessory Gearbox Seal Carrier | 1 | |
| PWC37612 | Drift, Alternator Drive Oil Seal Carrier (Pre-SB20198) | 1 | |
| PWC37651 | PULLER OIL SEAL CARRIER | 14 | |
| PWC37750 | Puller, Starter Generator Oil Seal Carrier | 1 | |
| PWC37910 | Puller, Accessory Gearbox Seal Carrier | 5 | |
| PWC37955 | BASE CARRIER | 4 | |
| PWC38077 | PULLER ALTERNATOR DR. OIL SEAL CARRIER | 12 | |
| PWC38077-613 | CARRIER SEAL TOOL PULLER | 1 | |
| PWC38077B | PULLER, ALTERNATOR DRIVE OIL SEAL CARRIER | 3 | |
| PWC38078 | DRIFT CARRIER | 11 | |
| PWC38079 | PULLER ALTERNATOR DR. OIL SEAL CARRIER | 13 | |
| PWC38079BASE, ALTERNATOR DRIVE OIL SEAL CARRIER | BASE, ALTERNATOR DRIVE OIL SEAL CARRIER | 1 | |
| PWC38380 | Drift, Alternator Oil Seal Carrier | 14 | |
| PWC38382 | DRIFT, OIL SEAL CARRIER, STARTER-GEN & FUEL PUMP | 9 | |
| PWC42045 | PULLER SEAL CARRIER | 3 | |
| PWC43564 | DRIFT CARRIER | 1 | |
| PWC50240 | FIXTURE - BALANCING, CARRIER | 3 | |
| PWC50256 | FIXTUR - BALANCING, CARRIER | 3 | |
| PWC50445 | GAGE - CARRIER FIRST STAGE | 1 | |
| PWC50712 | BASE, CARRIER | 3 | |
| PWC50856 | DRIFT SLEEVE CARRIER | 1 | |
| PWC5116-2 | SLEEVE, CARRIER SEAL # 2 | 2 | |
| PWC51165 | BASE, CARRIER SEAL | 7 | |
| PWC51166 | Sleeve Carrier Tools Set (8 Tools) | 2 | |
| PWC51166-1 | SLEEVE, CARRIER SEAL | 5 | |
| PWC51166-2 | Sleeve, Carrier Seal | 6 | |
| PWC51166-3 | SLEEVE, CARRIER SEAL | 2 | |
| PWC51166-4 | SLEEVE, CARRIER SEAL | 4 | |
| PWC51166-5 | SLEEVE, CARRIER SEAL | 5 | |
| PWC51167 | Drift Carrier Tools Set | 3 | |
| PWC51167-1 | DRIFT, ASSEMBLY - CARRIER SEAL | 6 | |
| PWC51167-100 | Drift Carrier Tools Set | 1 | |
| PWC51167-2 | DRIFT, CARRIER SEAL | 4 | |
| PWC51167-200 | Drift Carrier Tools Set | 1 | |
| PWC51167-300 | Drift Carrier Tools Set | 3 | |
| PWC51167-4 | DRIFT, CARRIER SEAL | 5 | |
| PWC51167-400 | Drift Carrier Tools Set | 1 | |
| PWC51167-500 | Drift Carrier Tools Set | 1 | |
| PWC51167-6 | DRIFT, CARRIER SEAL | 4 | |
| PWC51167-600 | Drift Carrier Tools Set | 1 | |
| PWC51167-700 | Drift Carrier Tools Set | 1 | |
| PWC51167-800 | Drift Carrier Tools Set | 1 | |
| PWC51167-900 | Drift Carrier Tools Set | 1 | |
| PWC51261 | PULLER( CARRIER) | 3 | |
| PWC51349 | PULLER 2ND STAGE CARRIER ASSY | 1 | |
| PWC51482 | Puller Carrier | 7 | |
| PWC51855 | BASE, CARRIER | 1 | |
| PWC55059 | PULLER-LIP SEAL CARRIER FROM COVER | 5 | |
| PWC55060 | DRIFT-AC GEN & HYD PUMP LIP SEAL CARRIER (DISASSY) | 4 | |
| PWC55744 | DRIFT-IMPELLER BREATHER OIL SEAL FROM CARRIER | 5 | |
| PWC55767 | BASE-AC GEN. & HYD. PUMP LIP SEAL CARRIER (DISASSY) | 4 | |
| PWC55768 | DRIFT-AC GEN. & HYD. PUMP LIP SEAL CARRIER (ASSY) | 5 | |
| PWC55843 | PULLER-REMOVE PMA SEAL CARRIER | 6 | |
| PWC55894 | PULLER-SEAL CARRIER | 6 | |
| PWC55934 | BASE-IMPELLER BREATHER OIL SEAL TO CARRIER | 5 | |
| PWC55956 | DRIFT-IMPELLER BREATHER OIL SEAL TO CARRIER | 6 | |
| PWC56036 | DRIFT SEAL INTO CARRIER | 9 | |
| PWC56037 | DRIFT, SEAL CARRIER INTO HOUSING | 3 | |
| PWC56429 | DRIFT, CARRIER | 8 | |
| PWC56429-1-QI | PROP BRAKE. SHAFT SEAL CARRIER INST. TOOL | 1 | |
| PWC56504-01 | DRIFT, ALTERNATOR DRIVE OIL SEAL CARRIER | 3 | |
| PWC56517 | Drift, Alternator Drive Oil Seal Carrier | 9 | |
| PWC56528 | SEAL/ CARRIER ASSY DRIFT | 15 | |
| PWC56528A | DRIFT, SEAL/CARRIER ASSEMBLY | 2 | |
| PWC565528A | DRIFT SEAL/CARRIER ASSEMBLY | 1 | |
| PWC57113 | DRIFT-MULTI PURPOSE (ASSY PMA OIL SEAL TO CARRIER) | 6 | |
| PWC57349 | DRIFT, OIL SEAL CARRIER | 8 | |
| PWC57350 | BASE OIL SEAL CARRIER | 5 | |
| PWC63134 | Drift Seal Carrier | 1 | |
| PWC64098 | PULLIER CARRIER | 4 | |
| PWC64372 | BASE-PMA. OIL SEAL TO CARRIER Q400 | 6 | |
| PWC64373 | BASE-MULTI PURPOSE (DISASSY) PMA OIL SEAL TO CARRIER (ASSY) | 7 | |
| PWC64620 | PULLER SEAL CARRIER | 4 | |
| PWC68203 | PULLER, SEAL, CARRIER (REPLACEMENT OF STARTER MAGNETIC SEAL) | 5 | |
| PWC70681 | DRIFT OIL SEAL CARRIER | 4 | |
| PWC70838 | PULLER, OIL SEAL CARRIER | 6 | |
| PWC70996 | PULLER 2ND STAGE CARRIER | 1 | |
| PWC71026 | PULLER SEAL CARRIER | 2 | |
| PWC71367 | Drift, Seal/Carrier | 7 | |
| PWC71395 | SOCKET NUT CARRIER | 1 | |
| PWC72130 | TEMPLATE GAGE CARRIER | 1 | |
| PWC72139 | HOLDING BASE, CARRIER | 1 | |
| PWC72247 | HOLDING BASE, FIRST STAGE CARRIER | 1 | |
| PWC72248 | DRIFT, FIRST-STAGE CARRIER | 1 | |
| PWC72306 | LIFTING FIXTURE, CARRIER | 1 | |
| RB T101732 | Lower Planetary Supprt Carrier Shaft Removal Or Install | 1 | |
| RB T101733 | Upper Planetary Spprt Carrier Shaft Removal Or Install | 1 | |
| RBT400301 | Track-Carrier Assembly (209-782-032) | 1 | |
| RBT400302 | Rotor Blade Support Carrier Assembly (209-782-034) | 1 | |
| RBT400303 | Blade Support Carrier Assembly (209-782-035) | 1 | |
| RBT400304 | Mast Assembly Carrier | 1 | |
| RBT400305 | Lateral Track Carrier Assembly (209-782-038) | 1 | |
| RC4509B1A0A10 | HYDRO AXLE JACK MODEL RC4509B THIS PRODUCT CAN ONLY BE SHIPPED VIA LTL CARRIERS, FREIGHT METHODS | 6 | |
| S3200007501 | CARRIER PCBA | 1 | |
| S48433 | Carrier and Harness Guide | 3 | |
| S49321 | Carrier and Harness Guide | 1 | |
| SDR-36 | CANTILEVERED GEAR CARRIER 3.82 | 1 | |
| SDR-37 | CANTILEVERED GEAR CARRIER 5.80 | 1 | |
| SDR-38 | GEAR CARRIER 7.86 RATIO | 1 | |
| SDR-39 | CANTI GEAR CARRIER 3.82 RATIO | 1 | |
| SDR-58 | GEAR CARRIER FOR LOK-FAST | 1 | |
| SDR-58A | CARRIER ASSY FOR LOK-FAST | 1 | |
| SDR-59 | GEAR CARRIER FOR PISTOL SHEAR | 1 | |
| SDR-60 | CARRIER 3/8 THD NON REV 7.86 | 1 | |
| SDR-61 | GEAR CARRIER | 1 | |
| SDR-62 | CARRIER 3/8 THD REV 5.80 | 1 | |
| SDR-63 | CARRIER 3/8 THD REV 3.82 | 1 | |
| SDR-63NR | CARRIER 3/8-24 NR 3.82 RATIO | 1 | |
| SDR-64 | CARRIER 1/2 THD REV 7.86 | 1 | |
| SDR-65 | GEAR CARRIER | 1 | |
| SDR-66 | CARRIER W/ NO.1 JACOBS TAPER | 1 | |
| SDR-66ALC | NO1JT CARRIER ASSY LESS CHUCK | 1 | |
| SDR-66LC | CARRIER NO.1JT LESS CHUCK | 1 | |
| SDR-67 | CARRIER B-12 TAPER 5.80 RATIO | 1 | |
| SDR-68 | CARRIER 1/2 THD 3.82 RATIO | 1 | |
| SDR-98 | GEAR CARRIER 3/8"-24 | 1 | |
| SDRA65 | GEAR CARRIER | 1 | |
| SP53629 | PINION CARRIER HAMMER ASSY | 1 | |
| SP68545 | CARRIER GEAR | 1 | |
| SP69001 | SERVICE CARRIER ASSY | 1 | |
| SP69004 | SERVICE CARRIER ASSY | 1 | |
| SP74315-12A | GEAR CARRIER ASSY 17T | 1 | |
| SP74315-14A | GEAR CARRIER ASSY 13T | 1 | |
| SP74315-15A | GEAR CARRIER ASSY (11T) | 1 | |
| SP74315-16A | GEAR CARRIER ASSY - 9T | 1 | |
| SP74315-176A | GEAR CARRIER ASSY - 6T | 1 | |
| SP74315-17A | GEAR CARRIER ASSY - 7T | 1 | |
| SP74315-18A | GEAR CARRIER ASSY - 13T | 1 | |
| SP74383A | CARRIER ASSY 9T PINS FOR 9T | 1 | |
| SP74383B | CARRIER ASSY 9T PINS FOR 9T | 1 | |
| SP74384A | CARRIER ASSY 11T PINS FOR 9T | 1 | |
| SP74384B | CARRIER ASSY 11T PINS FOR 11T | 1 | |
| SP74385A | CARRIER ASSY 13T PINS FOR 11T | 1 | |
| SP74385B | CARRIER ASSY 13T PINS FOR 13T | 1 | |
| SP74386A | GEAR CARRIER ASSY 500/700RPM | 1 | |
| SP74387A | GEAR CARRIER ASSY 11T SUN | 1 | |
| SP74388A | GEAR CARRIER ASSY 13T SUN | 1 | |
| SP74391A | GEAR CARRIER ASSY 17T SUN | 1 | |
| SP74392A | CARRIER ASSY 17T PINS FOR 13T | 1 | |
| SP74392B | CARRIER ASSY 17T PINS FOR 17T | 1 | |
| SP74506A | CARRIER ASSY1/4IN QC SGL RED5T | 1 | |
| SP74506B | CARRIER ASSY 1/4"QC SGL RED 7T | 1 | |
| SP74506C | CARRIER ASSY 1/4QC SGL RED 11T | 1 | |
| SP74508A | CARRIER ASSY 1/4QC DBL RED 11T | 1 | |
| SP74509A | CARRIER ASSY 1/4QC DBL RED 13T | 1 | |
| SP74511A | CARRIER ASSY HEX SGL RED 5T | 1 | |
| SP74511B | CARRIER ASSY HEX SGL RED 6T | 1 | |
| SP74511C | CARRIER ASSY HEX SGL RED 7T | 1 | |
| SP74512B | CARRIER ASSY HEX SGL RED 11T | 1 | |
| SP74514A | CARRIER ASSY HEX DBL RED 11T | 1 | |
| SP74515A | CARRIER ASSY HEX DBL RED 13T | 1 | |
| SP74522A | CARRIER ASSY HEX DBL RED 17T | 1 | |
| SP74524A | CARRIER ASSY 1/4QC DBL RED 17T | 1 | |
| SP74837 | CARRIER SERVICE ASSY | 1 | |
| SPSDR-36A | CARRIER ASSY 3.82 RATIO CANTIL | 1 | |
| SPSDR-37A | CARRIER ASSY 5.80 RATIO CANTIL | 1 | |
| SPSDR-38A | CARRIER ASSY 7.86 RATIO CANTIL | 1 | |
| SPSDR-39A | CARRIER ASSY 3.82 RATIO CANTIL | 1 | |
| SPSDR-59A | CARRIER ASSY SHEAR 7.86 RATIO | 1 | |
| SPSDR-60A | CARRIER ASSY 3/8-24 7.86 RATIO | 1 | |
| SPSDR-62A | CARRIER ASSY 3/8-24 5.80 RATIO | 1 | |
| SPSDR-63A | CARRIER ASSY 3/8-24 3.82 RATIO | 1 | |
| SPSDR-63NRA | CARRIER ASSY 3/8-24 NR 3.82R | 1 | |
| SPSDR-64A | CARRIER ASSY 1/2-20 7.86 RATIO | 1 | |
| SPSDR-65A | CARRIER ASSY 1/2-20 5.80 RATIO | 1 | |
| SPSDR-66A | CARRIER ASSY 1JT W/CHUCK | 1 | |
| SPSDR-67A | CARRIER ASSY B12 TAPER 5.80R | 1 | |
| SPSDR-68A | CARRIER ASSY 1/2-20 3.82 RATIO | 1 | |
| SPSSD-63A | CARRIER ASSY 10MM HEX 5.80 RAT | 1 | |
| SPSSD-64A | CARRIER ASSY 10MM HEX 3.82 RAT | 1 | |
| SSD-21 | CANTILEVERED SD CARRIER 5.80 | 1 | |
| SSD-22 | CANTILEVERED SD CARRIER 7.86 | 1 | |
| SSD-60 | CARRIER W QUICK CHG 7.86 RATIO | 1 | |
| SSD-61 | CARRIER W QUICK CHG 5.80 RATIO | 1 | |
| SSD-62 | QUICK CHANGE CARRIER 3.82 | 1 | |
| SSD-63 | HEX OUTPUT 5.80 RATIO CARRIER | 1 | |
| SSD-64 | HEX OUTPUT 3.82 RATIO CARRIER | 1 | |
| ST70170 | Puller, Carrier | 1 | |
| T101281-101 | CARRIER SUPPORT | 1 | |
| TOWRRJ-C-001 | TOWING CARRIER | 1 | |
| U21842000 | EXTRACTOR, TACHOM. AND TPIS CARRIER | 9 | |
| V1020 | HELICARRIER MODEL V\020 | 1 | |
| W1101 | REFLECTOMETER - MULTI CARRIER TIME DOMAIN (MCTDR) | 1 | |
| WCAT00 | CARRIER:, EUROCOPTER ASSEMBLY-350,-355 | 4 | |
| WCBR00 | CARRIER:, | 1 | |
| 332А93-3191-00 | A TOOL FOR REMOVING THE UPPER STOP OF THE CARRIER SCREW | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
