| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98S53805002-000 | CALIBRATION STANDARD ET | 6 | |
| 98S53805002000 | CALIBRATION STANDARD ET | 6 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 2591553-901 | CALIBRATION SET - STANDARD (CALIBRATION) | 1 | |
| (CALIB) 98F29003000000 | WRENCHES WRENCHES-STANDARD TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003002000 | TOOLSET TOOL SET,STANDARD TORQUE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D51407291001 | STANDARD SET, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| 001U532A5100000 | DORNIER 328/328 JET SE.4.48A CALIBRATION STANDARD Part 4 53-21-23 Page 11 Figure 407 Includes Test Report and Certificate of Conformance. | 1 | |
| 12245-011-001 | SET, TEST, CALIBRATION STANDARD | 1 | |
| 12445-002-003 | TOOL, TEST SET, CALIBRATION STANDARD | 3 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 212-93011-0001 | Casa Calibration Standard,57-10-03, No.5 Page 3-11 to 3-14, Use BACR15BB5D8C rivet | 1 | |
| 212-93012-0001 | Casa Calibration Standard,57-10-03, No.8 Page 3-19, Use rivet in Drawer 393 | 1 | |
| 212-93013-0001 | Casa Calibration Standard, No.9, Page 3-25, Use MS20470AD4-5 rivet | 1 | |
| 212-93015-0001 | Casa Calibration Standard, No.12, Page 3-37, Use MS20470AD4-10 rivet | 1 | |
| 23-55ST | CALIBRATION STANDARD TEST SET | 1 | |
| 328JET-SE.4.44 | Calibration Standard, 328JET PT6 51-60-01:PG9/10 FIG605 | 1 | |
| 530G12406-1-3 | CALIBRATION STANDARDS-STEEL BLOCKS,SET OF 3 | 1 | |
| 6583103-1 | Cessna Model 500 Calibration Standard 53-30-03-0 Rev. 14 Figure 4 Sheet 1 Inspection. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 6683101-17 | ET CALIBRATION STANDARD, 560 XL SKIN AND DOUBLER | 1 | |
| 80RS10 | Calibration Standard, MD80 SID Section 2-1:FIG13 PG1 SHEET1 | 2 | |
| 80RS11 | Calibration Standard, MD80 SID Section 2-1:FIG16 PG1 SHEET1 | 1 | |
| 80RS12 | Calibration Standard, MD80 SID Section 2-1:FIG19 PG1 SHEET1 | 1 | |
| 80RS13 | Calibration Standard, MD80 SID Section 2-1:FIG20 PG1 SHEET1 | 1 | |
| 80RS16 | Calibration Standard, MD80 SID Section 2-1:FIG23 PG1 SHEET1 | 1 | |
| 80RS18 | Calibration Standard, MD80 SID Section 2-1:FIG25 PG1 SHEET1 | 2 | |
| 80RS23 | Calibration Standard, MD80 SID Section 2-1:FIG31 PG1 SHEET1 | 1 | |
| 80RS3 | Calibration Standard, MD80 SID Section 2-1:FIG3 PG1 SHEET1 | 1 | |
| 80RS4 | Calibration Standard, MD80 SID Section 2-1:FIG4 PG1 SHEET1 | 1 | |
| 80RS5 | Calibration Standard, MD80 SID Section 2-1:FIG5 PG1 SHEET1 | 1 | |
| 80RS6 | Calibration Standard, MD80 SID Section 2-1:FIG6 PG1 SHEET1 | 2 | |
| 80RS7 | Calibration Standard, MD80 SID Section 2-1:FIG7 PG1 SHEET1 | 1 | |
| 9080708 | CALIBRATION STANDARD SET (3 STDS) 20 TO 40 IACS (30 IACS); (42 IACS); (60 IACS) | 1 | |
| 9081003 | CALIBRATION STANDARD SET (2 STDS.) 4.4 MS/M (8 IACS);58 MS/M (100 IACS) | 1 | |
| 98S51605001-202 | ET CALIBRATION STANDARD (MATERIAL CORROSION RESISTANT STEEL) | 3 | |
| 98S51605001-212 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of C... | 4 | |
| 98S51605001-214 | ATR REFERENCE STANDARD 15-5PH Steel PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of Confo... | 4 | |
| 98S51605001-216 | ATR REFERENCE STANDARD ..TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certifica... | 3 | |
| 98S51605001-218 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certificat... | 3 | |
| 98S51605001-220 | ATR REFERENCE STANDARD PT 6 51-60-00 15-5PH stainless steel Calibration Standard for Rotary Probes Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certifi... | 4 | |
| 98S51605001-222 | ATR REFERENCE STANDARD TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Cert... | 3 | |
| 98S51605001-224 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 2024T3 | 4 | |
| 98S51605001-226 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 15-5PH | 3 | |
| 98S51605001-228 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 TA6V | 3 | |
| 98S51605001-230 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 2024T3 | 4 | |
| 98S51605001-232 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 15-5PH | 3 | |
| 98S51605001-234 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 TA6V | 3 | |
| 98S51605001212 | ET CALIBRATION STANDARD | 4 | |
| 98S53005011-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-21 FIGURE 601 SHEETS 1&2 PAGE 608 & 609. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005020-000 | ALUMINUIM CALIBRATION STEP WEDGE STANDARD FOR ET | 4 | |
| 98S53005020-200 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-202 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-204 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-206 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-208 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005020-210 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-212 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-214 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-216 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020000 | ALUMINUIM CALIBRATION STEP WEDGE STANDARD FOR ET | 4 | |
| 98S53005021-000 | ATR72 CALIBRATION STANDARD 53-51-01 PART 6 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005027-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-01 FIGURE 606 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005029-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-01 FIGURE 601 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005030-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-21 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005031-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-04 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005032-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-01 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005033-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-02 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53605002000 | CALIBRATION STANDARD STR.3, 11ET17 | 1 | |
| 98S53805002-000 | ET CALIBRATION REFERENCE STANDARD | 6 | |
| 99A14144-101 | ET CALIBRATION TEST STANDARDS | 1 | |
| 99A14145-101 | ET CALIBRATION TEST STANDARDS | 1 | |
| 99A53307264000 | CALIBRATION STANDARD SET | 1 | |
| 99A57504294000 | AIRBUS A300-600 CALIBRATION STANDARD PT 6 57-52-05 PAGE 606 FIGURE 602 (SHEET 2). MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D5109001000 | CALIBRATION STANDARD SET AIRBUS | 1 | |
| 99D51407291000 | STANDARD SET, CALIBRATION | 2 | |
| 99D51407291001 | STANDARD SET, CALIBRATION | 7 | |
| 99D51407291001 BLOCK 2 | STANDARD SET, CALIBRATION | 1 | |
| 99D55109001000 | CALIBRATION STANDARD SET | 7 | |
| 99D57004000000 | Calibration standard set. A340-500/-600, 51-63-03-PB1; Pages 2-3, Figure 51-63-03-991-001-A SHEET 01 AND SHEET 02, Includes 99D57004000040 and 99D57004000042. | 4 | |
| 99F53207316000 | Airbus Standard A330 53-21-36-PB6 PG 16 FIGURE 53-21-36-991-004-A SHEET 01..Calibration Block PN 99F53207316000 | 1 | |
| 99F53207317000 | Airbus Standard A330 53-21-36-PB6 PG 18 FIGURE 53-21-36-991-005-A SHEET 01..Calibration Block PN 99F53207317000 | 1 | |
| 99F53207318000 | Airbus Standard A330 53-21-36-PB6 PG 20 FIGURE 53-21-36-991-006-A SHEET 01..Calibration Block PN 99F53207318000 | 1 | |
| 99F53303073000 | AIRBUS CALIBRATION STANDARD A340-500/-600 FIGURE 53-39-22-991-038-A SHEET 1. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303084000 | AIRBUS CALIBRATION STANDARD A340-500/-600 FIGURE 53-39-22-991-038-A SHEET 2. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 9RST1 | Calibration Standard, MD80 SID Section 2-1:FIG18 PG1 SHEET1 | 1 | |
| AFNDT-3072 | Custom designed eddy current aircraft calibration standard, Drawing 3, Sheets 1-3, for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3136-7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 7075-T6 Aluminum | 1 | |
| AFNDT-3136/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 2024-T3 Aluminum | 1 | |
| AFNDT-3137AL | 14 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole Per Boeing B737 PT 6 51-00-00 Prodedure 1 | 1 | |
| AFNDT-3250/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" inch diameters. ( .030 x .030 Corner and .020 x .020 Midwall EDM Notches in each Hole. Material: 2024-T3 Aluminum | 1 | |
| AFNDT-3277 | Custom 2 Layer 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. 36 Total EDM Notches.1.) EDM Notch Specifications: .030 x .030 Corner EDM Notches in each Hole. 2.) Faying Surfa | 1 | |
| AFNDT-3296/316L | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .020 x .005" ± .002" Thru EDM Notches in each Hole. Material: 316L Stainless Steel. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3308AL | Eddy Current Calibration Standard 3/8” diameter hole standard. Material: 2024-T3 standard with a .030”x .030" corner notch. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3386/7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .040 x .005 ±.002" Through EDM Notches in each Hole. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3389/15-5 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/4340 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/6AL4V | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3459AL | Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1. | 1 | |
| AFNDT-3459TI | Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in | 1 | |
| AFNDT-3460AL | Custom Eddy Current Bolt Hole Calibration Standard. Total of 35 Hole Sizes: Diameters 3.0mm, 3.2mm, 4.0mm, 4.2mm, 4.6mm, 5.0mm, 5.4mm, 5.8mm, 6.2mm, 6.6mm, 7.0mm, 7.4mm, 7.8mm, 8.0mm, 8.2mm, 8.6mm, 9.0mm, 9.4mm, 9.8mm, 10.2mm, 10.6mm, 11.0mm, 11.4mm, 11. | 1 | |
| AFNDT-3471AL | Custom Eddy Current Bolt Hole Calibration Standard Manufactured in Accordance with Airbus Specification 51-63-04. Total of 14 Hole Sizes x 4 For a Total of 56 Holes: Diameters 13.5mm(.531"), 14.1mm(.555"), 14.3mm(.563"), 15.0mm(.591"), 15.8mm(.622"), ... | 1 | |
| AFNDT-3472AL | Custom Eddy Current Bolt Hole Calibration Standard Manufactured in Accordance with Boeing Specification 51-00-00. Total of 14 with 28 EDM Notches. Hole Sizes: Diameters 13.5mm(.531"), 14.1mm(.555"), 14.3mm(.563"), 15.0mm(.591"), 15.9mm(.625"), 16.7mm(... | 1 | |
| AFNDT-3484AL | Eddy Current Bolt Hole Calibration standard, 5 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: .750", .875",1.00" 1.125" 1.187", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3485AL | Eddy Current Bolt Hole Calibration standard, 3 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: 1.250" 1.375", 1.500", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3502AL | 4 HOLE ALUMINUM CALIBRATION STANDARD. ....2 HOLE SIZES AT 2.38mm DIAMETER WITH A CONER EDM NOTCH .030" x .030" X .005" WIDE ± .001" IN ONE HOLE. NO EDM NOTCH IN THE SECOND HOLE.....2 COUNTERSINK HOLES AT .0937mm DIAMETER WITH AN EDM NOTCH IN ONE OF T... | 1 | |
| AFNDT-3527/2024T3 | 12 Hole Calibration Standard, 27 Total EDM Notches. Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 ± .002" Corner EDM Notches in each Hole. 3 surface EDM Notches .008”,.020” | 1 | |
| AL29-32 | CALIBRATION REFERENCE STANDARD, BLOCK, 2024-T3 ALUMINUM ALLOY, CONDUCTIVITY BETWEEN 29% AND 32% IACS, CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP SURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR EQUIVALENT) | 6 | |
| AL35-45 | CALIBRATION REFERENCE STANDARD (CRS), BLOCK, ALUMINUM ALLOY, WITH CONDUCTIVITY BETWEEN 35% AND 45% IACS (20.3 MS/M TO 26.1 MS/M), THAT CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, ( | 8 | |
| ASTW-8 | CUSTOM ACRYLIC CALIBRATION STANDARDS, SET OF 8, THICKNESS .921 / .818 / .559 / .504 / .275 / .248 / .157 / .134 | 1 | |
| DAC ETOH AL | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAC ETOH FE | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAC ETOH TI | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| EXBC670-59040-005 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.000 IN. (76.20 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−001 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 4.224 IN. (107.29 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−003 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.374 IN. (85.70 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−007 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.032 IN. (26.21 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−009 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−011 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−013 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670−59040−001 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 4.224 in. (107.29 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−003 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.374 in. (85.70 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−005 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.000 in. (76.20 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−007 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.032 in. (26.21 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−009 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−011 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−013 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBD400-50013-003 | Calibration Standard, 2024-T3 Clad, NAS1097AD4 Rivets, Paint.. | 1 | |
| MRC005574 | INDICATOR/REGISTER - MOISTURE, RADOME (MODEL A8AF) (115 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATION STANDARD AND 3 FOOT CABLE) | 3 | |
| MRC006507 | INDICATOR/REGISTER - MOISTURE, RADOME (MODEL A8AF) (230 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATION STANDARD AND 3 FOOT CABLE) | 5 | |
| MS20426D5-6 | CALIBRATION STANDARD RIVET | 1 | |
| NDT811 | BOEING CALIBRATION STANDARD FIGURE 3 DETAIL II. MATERIAL: 2024-T351 ALUMINUM or 7075-T651 ALUMINUM. | 1 | |
| PASSCALDMM | STANDARD CALIBRATION CERTIFICATE NEW MULTIMETER | 1 | |
| PDL 1030J | HERCULES C-130 UT CALIBRATION STANDARD FIGURE 17 SHEETS 1&2 20-40-00. FASTENER (HL18PB6-8, HL18PB6-6, HL70-6). Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| PDL 1217BJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 25 PAGE 35, CAST ACRYLIC SHEET | 1 | |
| PDL 1217CJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 26 PAGE 36, CAST ACRYLIC SHEET | 1 | |
| PDL 1254J | HERCULES C-130 UT CALIBRATION STANDARD FIGURE 21 SHEETS 1-4 20-40-00. FASTENER (HLT116 HI-LOCK FASTENERS WITH SELF LOCKING NUTS). Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| PDL 457AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2, 7075-T6 ALUMINUM | 2 | |
| PDL 457SJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2, 4340 STEEL | 2 | |
| PDL 457SS | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2 304 STAINLESS STEEL | 2 | |
| PDL 601 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 601-101 thru 109 | 1 | |
| PDL 624 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 624-101 thru 109 | 1 | |
| PDL 919 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 2 | |
| PDL 919J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 1 | |
| SB 57-3329 FIG.9 | Raytheon 12 Hole Standard Calibration Block Figure 9 Page 20, Service Bulletin SB 57-3329. Hole sizes 9/64, 11/64,3/16 and 13/64. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SE.4.44 | 328JET CALIBRATION STANDARD (SE.4.44); 51-60-01 PAGE 9/10 FIG.605 EDDY CURRENT | 1 | |
| SIGMATEST (D2-069) | CALIBRATION STANDARD SET (2 STDS.) 4.4 MS/M (8 IACS);58 MS/M (100 IACS) | 1 | |
| SK601R-30009-1 | CALIBRATION STANDARD, CANADAIR JET CRJ200 PT4 53-61-153: FIG 1 PG 6, 2 LAYERS OF .063 2024-T3 WITH 1 | 5 | |
| UT-RC-5S-CASE | 5 -STEP CALIBRATION BLOCK, WOOD CASE FOR STANDARD INCH VERSION, CUSTOM INCH VERSION C2 AND METRIC A | 1 | |
| V1-IIW-CS | V-1 (A-2) IIW Angle Beam Calibration Block (Metric). Made to British Standard: BS-2704, German Standard: DIN 54-120, Australian Standard AS 2803 and ISO 2400. Material: A36/1018 Carbon Steel. Thickness of 1" / 25 mm, Height of 4" / 100 mm for straight bea | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
