| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 99D57504109000 | CALIBRATION REFERENC | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98S54305001202 | CALIBRATION REFERENCE STANDARD | 1 | |
| (CALIB) 99A51107299001 | STANDARD, REFERENCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A53307292001 | Reference Block (NDT) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57204436000 | STANDARD STANDARD, REFERENCE - INCLUDING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57504296000 | REFERENCE STANDARD (CALIBRATION) | 2 | |
| (CALIB) 99D54403001002 | REFERENCE STANDARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54403007000 | REFERENC REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D57204164001 | BLOCK-REFERENCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F53303032000 | REFERENCE BLOCK (CALIBRATION) | 1 | |
| (CALIB) 99F54503011000 | REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F54503012000 | REFERENCE BLOCK FOR A330 NTM 54 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C12-PCS-3C1N | REFERENCE STANDARD COMPOSITE (CALIBRATION) | 1 | |
| (CALIB) CREF5-04174559100 | CONDUCTIVITY REFERENCE STANDARD (CALIBRATION) | 1 | |
| (CALIB) HORIZONTAL STAB SLINGS | CALIBRATE AND RE-CERTIFY THIS TOOL (HORIZONTAL STAB SLINGS) IN ACCORDANCE WITH BOEING DWG C55007 REV. D (OR LATER) AND LOLER 1998 (OR LATER). TEST/CALIBRATION CERTIFICATE MUST REFERENCE MAINTENANCE DATA (MANUAL/STANDARD) AND REVISION USED. ADDITIONAL REFE | 1 | |
| (CALIB) NDT3282 | REFERENCE STANDARD (CALIBRATION) | 2 | |
| (CALIB) NDT3305B | REFERENCE STANDARD (CALIBRATION) | 1 | |
| 127-XXX | Corrosion reference standard Calibration Block | 1 | |
| 15-5 PH | CALIBRATION REFERENCE STANDARD, 15-5 PH STAINLESS STEEL, CONTAINING 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES, (MHIRJ OR EQUIVALENT) | 1 | |
| 15-5PH | CALIBRATION REFERENCE STANDARD 15-5 PH STAINLESS S | 1 | |
| 15−5 PH | Calibration reference standard 15−5 PH stainless steel containing 0.008 in. (0.20 mm)0.020 in. (0.51 mm) and 0.040 in. (1.02 mm) deep electrical discharge machined notches (Bombardier Inc. or equivalent) | 1 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 20134E | CALIBRATION REFERENCE STANDARD | 1 | |
| 203026-101 | TGB BEVEL GEAR - REFERENCE STANDARD, CALIBRATION RING EWR | 1 | |
| 5290024-1 | CESSNA CALIBRATION REFERENCE STANDARD | 1 | |
| 55-36-01 | UT CALIBRATION REFERENCE STANDARD , STEP WEDGE, 7000 SERIES ALUMINUM, GENERIC AS PER ATR 72 NTM 55-36-01 | 1 | |
| 98S51605001-212 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of C... | 4 | |
| 98S51605001-214 | ATR REFERENCE STANDARD 15-5PH Steel PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of Confo... | 4 | |
| 98S51605001-216 | ATR REFERENCE STANDARD ..TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certifica... | 3 | |
| 98S51605001-218 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certificat... | 3 | |
| 98S51605001-220 | ATR REFERENCE STANDARD PT 6 51-60-00 15-5PH stainless steel Calibration Standard for Rotary Probes Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certifi... | 4 | |
| 98S51605001-222 | ATR REFERENCE STANDARD TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Cert... | 3 | |
| 98S51605001-224 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 14.3mm, 14.6mm, 15.1mm, 15.9mm, 16.3mm, 16.7mm, 28.9mm, 19.8mm, 22.2mm, 22.6mm, 23mm ). Includes Test Report and... | 4 | |
| 98S51605001-226 | ATR REFERENCE STANDARD 15-5PH Steel PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 14.3mm, 14.6mm, 15.1mm, 15.9mm, 16.3mm, 19.0mm, 19.4mm, 19.8mm, 22.2mm, 22.6mm, 23mm ). Includes Test Report and Cer... | 3 | |
| 98S51605001-228 | ATR REFERENCE STANDARD TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 14.3mm, 14.6mm, 15.1mm, 15.9mm, 16.3mm, 19.0mm, 19.4mm, 19.8mm, 22.2mm, 22.6mm, 23mm ). Includes Test Repor... | 3 | |
| 98S53005021-000 | LFEC CALIBRATION REFERENCE STANDARD | 3 | |
| 98S53505006-000 | UT CALIBRATION REFERENCE STANDARD | 4 | |
| 98S53805002-000 | ET CALIBRATION REFERENCE STANDARD | 6 | |
| 98S54305002-200 | UT CALIBRATION REFERENCE STANDARD | 5 | |
| 98S57105004-200 | UT CALIBRATION REFERENCE STANDARD | 4 | |
| 98S57105006-200 | UT CALIBRATION REFERENCE STANDARD | 3 | |
| 98S57105015-200 | UT CALIBRATION REFERENCE STANDARD | 3 | |
| 98S57205030.004 | UT CALIBRATION REFERENCE STANDARD , STEP WEDGE, 7000 SERIES ALUMINUM, GENERIC | 5 | |
| 999-6807-02 | US REFERENCE STANDARD, EQUIPMENT CALIBRATION PART | 1 | |
| 999-6807-03 | US REFERENCE STANDARD, EQUIPMENT CALIBRATION | 1 | |
| 99A51107299001 | CALIBRATION REFERENCE STANDARD (CRS) | 5 | |
| 99A53307292001 | REFERENCE BLOCK (NDT) (CALIBRATION) | 4 | |
| 99A57204403001 | REFERENCE STANDARD - CALIBRATION BLOCK | 5 | |
| 99D52809004000 | AIRBUS REFERENCE STANDARD, 52-81-06, PAGE6 CALIBRATION BLOCK | 7 | |
| 99D54403000004 | CALIBRATION REFERENCE BLOCK | 7 | |
| 99D54403000006 | CALIBRATION REFERENCE BLOCK | 1 | |
| 99D54403001002 | REFERENCE STANDARD (CALIBRATION) | 4 | |
| 99D57103010000 | CALIBRATION REFERENCE BLOCK | 5 | |
| 99D57103013000 | CALIBRATION REFERENCE BLOCK | 6 | |
| 99D57103015000 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57103016000 | CALIBRATION REFERENCE BLOCK | 7 | |
| 99D57103021000 | CALIBRATION REFERENCE BLOCK | 5 | |
| 99D57204164000 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57204164001 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57504103001 | CALIBRATION REFERENCE BLOCK | 3 | |
| 99D57504109000 | CALIBRATION REFERENCE BLOCK | 3 | |
| 99N51109009000 | CALIBRATION REFERENCE STANDARD (CRS) | 2 | |
| 99N51109010000 | CALIBRATION REFERENCE STANDARD (CRS) | 2 | |
| AFNDT-2227Ti-1 | 8 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", EDM NOTCH: .050" x .050" x .005" +0.000/-.002" BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, 737 PT 6 51-00-00 FIG 3 PROCEDURE 17, PG.8 MATERIAL(6AL-4V) TIT | 1 | |
| AFNDT-3552TI | 5 Step calibration block (0.100", 0.250", 0.500", 0.750" and 1.000"; . Step pad size: .75” x .75”. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance.....Reference: B777 NTM Part4 51-00-10 | 1 | |
| AL29-32 | BOMBARDIER CALIBRATION REFERENCE STANDARD | 6 | |
| AL35-45 | CALIBRATION REFERENCE STANDARD (CRS), BLOCK, ALUMINUM ALLOY, WITH CONDUCTIVITY BETWEEN 35% AND 45% IACS (20.3 MS/M TO 26.1 MS/M), THAT CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, ( | 8 | |
| AN670-55-31-102 | CALIBRATION REFERENCE STANDARD (CRS), MADE OF ALUMINUM WITH MULTIPLE LAYERS CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| AN670-55-31-110 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| BH7475-T7351 | CALIBRATION REFERENCE STANDARD, ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35% TO 45% IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR EQUIVALENT) | 4 | |
| CE1617528 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617529 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE9900085-101 | COMPOSITE LAMINATE CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900086-101 | COMPOSITE LAMINATE CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-001 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-003 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-005 | CALIBRATION REFERENCE STANDARD (CRS) | 1 | |
| CE9900088-007 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-009 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900430-001 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| EX601R47015-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EX601R47015−001 | Calibration reference standard − piano hinge passenger door (Bombardier Inc.) | 1 | |
| EX601R51086-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EX601R51093 | Calibration reference standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EX604-60024 | CALIBRATION REFERENCE STANDARD MULTI-LAYERED ALUMINUM ALLOY FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 2 | |
| EX604-60024-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EX604−60024 | Calibration reference standard multi−layered aluminum alloy fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 2 | |
| EX605−60037−001 | CALIBRATION REFERENCE STANDARD MADE FROM | 1 | |
| EXBC100-59009-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59040-005 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.000 IN. (76.20 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−001 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 4.224 IN. (107.29 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−003 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.374 IN. (85.70 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−007 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.032 IN. (26.21 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−009 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−011 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−013 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59045 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59046 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59066-001 | CALIBRATION REFERENCE STANDARD CONTAINS 0.250 IN | 1 | |
| EXBC670-59066−001 | CALIBRATION REFERENCE STANDARD CONTAINS 0.250 IN (6.35 MM) LONG0.005 IN. (0.127 MM) WIDE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59089-001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXBC670-59089−001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59133 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59141 | CALIBRATION REFERENCE STANDARD MULTI LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59142 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59143-001 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES. (MHIRJ) | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59148 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59156 | CALIBRATION REFERENCE STANDARD MADE FROM MULTIPLE ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59157-003 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59159 | CALIBRATION REFERENCE STANDARD(CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM)NOTCHES (MHIRJ). | 1 | |
| EXBC670-59160 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670-59161 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59162 | CALIBRATION REFERENCE STANDARD, ALUMINUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (MHIRJ OR EQUIVALENT) | 1 | |
| EXBC670-59163 | CALIBRATION REFERENCE STANDARD TITANIUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (BOMBARDIER INC.EQUIVALENT) | 1 | |
| EXBC670-59164 | CALIBRATION REFERENCE STANDARD MULTIPLE LAYERS ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59174 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59174-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59176 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59178 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYER FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59179 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59182 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59182-001FS | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59183-001 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) TRANSDUCER - ANGLE BEAM, 5.0 MHZ, 0.375 IN. (9.53 MM) H X | 1 | |
| EXBC670-59185 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670−59040−001 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 4.224 in. (107.29 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−003 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.374 in. (85.70 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−005 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.000 in. (76.20 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−007 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.032 in. (26.21 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−009 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−011 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−013 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59045 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59046 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59065 | Calibration reference standard assembly aluminum and steel alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59066−001 | Calibration reference standard contains 0.250 in (6.35 mm) long0.005 in. (0.127 mm) wide electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59068 | Calibration reference standard multiple layered assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59089−001 | Calibration reference standard similar in material as the inspection area containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59094 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59098 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59099 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59101 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59125 | Calibration reference standard assembly contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59133 | Calibration reference standard made from aluminum alloy containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59134 | Calibration reference standard aluminum alloy that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59139−001 | Calibration reference standard made from aluminum alloy that contains electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59141 | Calibration reference standard multi layers fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59142 | Calibration Reference Standard made from aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59143 | Calibration Reference Standard assembly that contains electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59148 | Calibration Reference Standard (CRS) multiple layers fastened assembly that contains electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59154 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59156 | Calibration Reference Standard made from multiple aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59157 | Calibration reference standard multiple layered fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59158 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59159 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59161 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59162 | Calibration Reference Standard aluminum alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59163 | Calibration Reference Standard titanium alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59164 | Calibration Reference Standard multiple layers assembly that contains electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59174 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59176 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59178 | Calibration reference standard multiple layer fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXSH670-31001-1 | CALIBRATION REFERENCE STANDARD, STGR15R BUTT JOINT, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXSH670-31001−1 | CALIBRATION REFERENCE STANDARD STGR15R BUTT JOINT CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31002-1 | CALIBRATION REFERENCE STANDARD STGR1L AND STGR20L BUTT JOINTS CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31011−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-35910-1 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670-35910−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670−31001−1 | Calibration reference standard STGR15R butt joint contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31002−1 | Calibration reference standard STGR1L and STGR20L butt joints contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31011−1 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31014−1 | Calibration reference standard pressure bulkhead machined frames FS693.00 and FS847.00 contains subsurface electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXSH670−35910−1 | Calibration Reference Standard assembly that contains electrical discharge machined notches | 1 | |
| EXSH690-31003−11 | CALIBRATION REFERENCE STANDARD EMERGENCY EXIT DOOR SURROUND STRUCTURE CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH690-31022 | CALIBRATION REFERENCE STANDARD POTABLE WATER. | 1 | |
| EXSH690-31023-1 | CALIBRATION REFERENCE STANDARD, CIRCUMFERENTIAL SKIN JOINT STGR7 TEST PIECE, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXSH690-31023−1 | CALIBRATION REFERENCE STANDARD CIRCUMFERENTIAL SKIN JOINT STGR7 TEST PIECE CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH690−31003−11 | Calibration reference standard emergency exit door surround structure contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH690−31022 | Calibration reference standard potable water. | 1 | |
| EXSH690−31023−1 | Calibration reference standard circumferential skin joint STGR7 test piece contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH698-31024-1 | CALIBRATION REFERENCE STANDARD | 1 | |
| IIW TYPE 2 | CALIBRATION REFERENCE STANDARD BLOCK, ALUMINUM. (GE OR EQUIVALENT) | 1 | |
| NDT 7015 C | CALIBRATION REFERENCE STANDARD | 1 | |
| NDT 7015B | ULTRASONIC CALIBRATION REFERENCE STANDARD | 1 | |
| NDT 7078 | ULTRASONIC CALIBRATION REFERENCE STANDARD | 1 | |
| NDT 745 | CALIBRATION REFERENCE STANDARD | 2 | |
| NDT 786-A | CALIBRATION REFERENCE STANDARD | 2 | |
| NDT3312 | NDT CALIBRATION BLOCK REFERENCE STANDARD | 2 | |
| NDT602 | Calibration Reference Standard | 1 | |
| NDT7015 C | CALIBRATION REFERENCE STANDARD | 1 | |
| NDT786-A | CALIBRATION REFERENCE STANDARD | 2 | |
| RH12-T40-7075T6 | CALIBRATION REFERENCE STANDARD (CRS), ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35% TO 45% IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (TECHNA NDT OR EQUIVALENT) | 1 | |
| RM200-T40-T6AL4V | CALIBRATION REFERENCE STANDARD, TITANIUM ALLOY, CONDUCTIVITY 1.1 % IACS, CONTAINS 0.010 IN. (0.25 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP SURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, AND VARIOUS SIZE HOLES WITH 0.040-IN (1.02 MM) EDM NOTC | 1 | |
| SK601-10021 | CALIBRATION REFERENCE BLOCK SET (TAIL SECTION / HORIZONTAL STABILIZER) - SK601-10021 SERIES (BLOCKS 1 - 5) | 1 | |
| SK601R-10022 | CALIBRATION REFERENCE STANDARD | 1 | |
| SK601R-10040-1 | CALIBRATION REFERENCE | 4 | |
| SK601R-20003 | CALIBRATION REFERENCE STANDARD | 2 | |
| SK601R-30008A | CALIBRATION REFERENCE | 6 | |
| SK601R-30009 | CALIBRATION, REFERENCE STANDARD | 2 | |
| SK601R-30009-1 | CALIBRATION, REFERENCE STANDARD | 5 | |
| SK601R-30014 | CALIBRATION STANDARD REFERENCE | 2 | |
| SK601R-30039 | NDT CALIBRATION REFERENCE STANDARD | 2 | |
| SK601R−10043 | Calibration reference standard block (Bombardier Inc.) | 1 | |
| SRS-0824T | CALIBRATION, REFERENCE | 3 | |
| ST4130 | CALIBRATION REFERENCE STANDARD, CARBON STEEL 4130 ALLOY, CONTAINING 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ OR COMMERCIALLY AVAILABLE). | 1 | |
| ST4340 | STANDARD, CALIBRATION REFERENCE | 5 | |
| STD-00107021 | Avcon Industries LFEC Calibration Reference Standard. BNC Document: 00107021, Rev. B Figure 7 Page 22. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| STD-1474 | CALIBRATION / REFERENCE BLOCK | 1 | |
| TEK-767-3 | CALIBRATION REFERENCE STANDARD | 1 | |
| TI-6AI-6V-2SN | CALIBRATION REFERENCE STANDARD | 1 | |
| TI-6AL-6V-2SN | CALIBRATION REFERENCE STANDARD, NO.TI-6AL-6V-2SN, MADE FROM TITANIUM ALLOY (1.1% IACS), CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (BOMBARDIER INC. OR EQUIVALENT) | 3 | |
| TP54-07-1 | AIRBUS SPLIT CALIBRATION REFERENCE STANDARD A318-A321 51-63-07-991-002 PB1. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance. | 2 | |
| VM650CIT-3A | CALIBRATION REFERENCE STANDARD – ROTARY PRPBE KIT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
