| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 99D57204125000 | CALIBRATION REFER BL | 5 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 99A53307292001 | Reference Block (NDT) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54403007000 | REFERENC REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D57204164001 | BLOCK-REFERENCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F53303032000 | REFERENCE BLOCK (CALIBRATION) | 1 | |
| (CALIB) 99F54503011000 | REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F54503012000 | REFERENCE BLOCK FOR A330 NTM 54 (CALIBRATION) (CALIBRATION) | 1 | |
| 127-XXX | Corrosion reference standard Calibration Block | 1 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 99A53307292001 | REFERENCE BLOCK (NDT) (CALIBRATION) | 4 | |
| 99A57204403001 | REFERENCE STANDARD - CALIBRATION BLOCK | 5 | |
| 99D52809004000 | AIRBUS REFERENCE STANDARD, 52-81-06, PAGE6 CALIBRATION BLOCK | 7 | |
| 99D54403000004 | CALIBRATION REFERENCE BLOCK | 7 | |
| 99D54403000006 | CALIBRATION REFERENCE BLOCK | 1 | |
| 99D57103010000 | CALIBRATION REFERENCE BLOCK | 5 | |
| 99D57103013000 | CALIBRATION REFERENCE BLOCK | 6 | |
| 99D57103015000 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57103016000 | CALIBRATION REFERENCE BLOCK | 7 | |
| 99D57103021000 | CALIBRATION REFERENCE BLOCK | 5 | |
| 99D57204164000 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57204164001 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57504103001 | CALIBRATION REFERENCE BLOCK | 3 | |
| 99D57504109000 | CALIBRATION REFERENCE BLOCK | 3 | |
| 99N51109010000 | CALIBRATION BLOCK - 99N51109010000 (REFER TO 51-10-32) | 2 | |
| AFNDT-3552TI | 5 Step calibration block (0.100", 0.250", 0.500", 0.750" and 1.000"; . Step pad size: .75” x .75”. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance.....Reference: B777 NTM Part4 51-00-10 | 1 | |
| AL29-32 | CALIBRATION REFERENCE STANDARD, BLOCK, 2024-T3 ALUMINUM ALLOY, CONDUCTIVITY BETWEEN 29% AND 32% IACS, CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP SURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR EQUIVALENT) | 6 | |
| AL35-45 | CALIBRATION REFERENCE STANDARD (CRS), BLOCK, ALUMINUM ALLOY, WITH CONDUCTIVITY BETWEEN 35% AND 45% IACS (20.3 MS/M TO 26.1 MS/M), THAT CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, ( | 8 | |
| AN670-55-31-110 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EX601R51093 | Calibration reference standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EX604-60024 | CALIBRATION REFERENCE STANDARD MULTI-LAYERED ALUMINUM ALLOY FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 2 | |
| EX604−60024 | Calibration reference standard multi−layered aluminum alloy fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 2 | |
| EXBC670-59040-005 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.000 IN. (76.20 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−001 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 4.224 IN. (107.29 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−003 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.374 IN. (85.70 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−007 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.032 IN. (26.21 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−009 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−011 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−013 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59045 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59046 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59141 | CALIBRATION REFERENCE STANDARD MULTI LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59143-001 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES. (MHIRJ) | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59148 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59157-003 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59159 | CALIBRATION REFERENCE STANDARD(CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM)NOTCHES (MHIRJ). | 1 | |
| EXBC670-59160 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670-59161 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59164 | CALIBRATION REFERENCE STANDARD MULTIPLE LAYERS ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59174 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59176 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59178 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYER FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59179 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59182 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59183-001 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) TRANSDUCER - ANGLE BEAM, 5.0 MHZ, 0.375 IN. (9.53 MM) H X | 1 | |
| EXBC670-59185 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670−59040−001 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 4.224 in. (107.29 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−003 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.374 in. (85.70 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−005 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.000 in. (76.20 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−007 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.032 in. (26.21 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−009 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−011 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−013 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59045 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59046 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59065 | Calibration reference standard assembly aluminum and steel alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59068 | Calibration reference standard multiple layered assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59094 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59098 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59099 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59101 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59125 | Calibration reference standard assembly contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59141 | Calibration reference standard multi layers fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59143 | Calibration Reference Standard assembly that contains electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59148 | Calibration Reference Standard (CRS) multiple layers fastened assembly that contains electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59154 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59157 | Calibration reference standard multiple layered fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59158 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59159 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59161 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59164 | Calibration Reference Standard multiple layers assembly that contains electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59174 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59176 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59178 | Calibration reference standard multiple layer fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXSH670-31011−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-35910-1 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670-35910−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670−31011−1 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−35910−1 | Calibration Reference Standard assembly that contains electrical discharge machined notches | 1 | |
| EXSH690-31022 | CALIBRATION REFERENCE STANDARD POTABLE WATER. | 1 | |
| EXSH690−31022 | Calibration reference standard potable water. | 1 | |
| IIW TYPE 2 | CALIBRATION REFERENCE STANDARD BLOCK, ALUMINUM. (GE OR EQUIVALENT) | 1 | |
| NDT3312 | NDT CALIBRATION BLOCK REFERENCE STANDARD | 2 | |
| SK601-10021 | CALIBRATION REFERENCE BLOCK SET (TAIL SECTION / HORIZONTAL STABILIZER) - SK601-10021 SERIES (BLOCKS 1 - 5) | 1 | |
| SK601R-30008A | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY, EQUIVALENT IN MATERIAL AND THICKNESS AS THE INSPECTION AREA CONTAINING SUBSURFACE ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 6 | |
| SK601R−10043 | Calibration reference standard block (Bombardier Inc.) | 1 | |
| ST4130 | CALIBRATION REFERENCE STANDARD, CARBON STEEL 4130 ALLOY, CONTAINING 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ OR COMMERCIALLY AVAILABLE). | 1 | |
| ST4340 | CALIBRATION REFERENCE STANDARD BLOCK - MADE FROM 4340 STEEL, MIL-S-5000, CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR COMMERCIALLY AVAILABLE). | 5 | |
| STD-1474 | CALIBRATION / REFERENCE BLOCK | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
