| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 171T17973-401 | CALIBRATION PLATE | 4 | |
| 29502305 | CALIBRATION PLATE | 1 | |
| 39374884 | CALIBRATION PLATE | 1 | |
| E20292 | CALIBRATION PLATE | 1 | |
| F50B955604015 | CALIBRATION PLATE | 1 | |
| S0143 | CALIBRATION PLATE | 1 | |
| SB10053118PLATE | CALIBRATION PLATE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 114-429 | CUP REMOVAL PLATE (CALIBRATION) | 1 | |
| (CALIB) 856A5807G02 | TEMPLATE, SPIRAL STENCIL FOR THE FRONT CONE (CALIBRATION) | 1 | |
| (CALIB) 98A21001502000 | PROTECTIVE PLATE-HEAT EXCHANGER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508027000 | TEMPLATE TEMPLATE-OUTBOARD FLAP,TRACKS 3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508030000 | TEMPLATE TEMPLATE-INBOARD FLAP,TRACK 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508688000 | TEMPLATS TEMPLATES - OUTBOARD FLAP, TRAC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34003500000 | BLANKING PLATE, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103014000 | TEMPLATE TEMPLATE,CUTTING-ANTENNA C.14-1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004011000 | TEMPLATE- TRACK CAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53309002000 | KARMAN ZONE DRILLING TEMPLATE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V07104001000 | PLATE - COVER PROTECTION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V44308842000 | PLATE INST. ADAPT. KU-KA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57004071000 | FLE INBD. RIB TEMPLATE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CB602-3 | NUTPLATE PUSHOFF TESTER (CALIBRATION) | 1 | |
| (CALIB) DLT5302-013-01 | MARKING TEMPLATE (CALIBRATION) | 1 | |
| (CALIB) FIL3600 | PLATE, GEAR SUPPORT TRANSFER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT028159 | SUPPORT/REACTION PLATE KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT032369 | Adaptor Plate (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT054220-1 | Support Plate (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT063357 | LONG REACH JACK ADAPTOR PLATE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT069109-1 | Setting Plate (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3060021000 | REMOVABLE DRILL PLATE 1 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3060022000 | REMOVABLE DRILL PLATE 2 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3070021000 | REMOVABLE DRILL PLATE 1 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3070022000 | REMOVABLE DRILL PLATE 2 RH (CALIBRATION) (CALIBRATION) | 1 | |
| 1. 5 STEP BLOCK | FOR THICKNESS AND LINEARITY CALIBRATION OF THIN MATERIALS-1018 STEEL, NICKEL PLATED | 1 | |
| 12345-045-001 | RUDDER CALIBRATION PLATE | 2 | |
| 27-1-6047-PROTO | Fokker calibration plate | 1 | |
| 5290020-4 | Cessna Model 401/402 Calibration Standard Figure 4 part 2 & 3 Inspection. Plate A - 7075-T6 Aluminum and Plate B - 2024-T3 Aluminum. | 1 | |
| 5431 | PLATE CALIBRATION | 9 | |
| 98D34003500000 | BLANKINGPLATE,SETCALIBRATIONCALIBRATION | 31 | |
| 98S51605001-218 | CALIBRATION TEMPLATE STANDARD | 3 | |
| 98S51605001000 | Calibration Template Std | 2 | |
| 98S51605001212 | CALIBRATION TEMPLATE | 4 | |
| 98S51605001218 | CALIBRATION ALUMINIUM TEMPLATE | 3 | |
| 98S51605001218-REVE | CALIBRATION TEMPLATE STANDARD | 1 | |
| 98S51605001224 | CALIBRATION TEMPLATE | 4 | |
| 98S51605001230 | CALIBRATION TEMPLATE | 4 | |
| 98S53005020-200 | ALUMINIUM PLATES CALIBRATION&ATR CALIBRATION STANDARD | 2 | |
| 98S53005020-202 | ALUMINIUM PLATES CALIBRATION STANDARD | 2 | |
| 98S53005020-203 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-204 | ALUMINIUM PLATES CALIBRATION STANDARD | 2 | |
| 98S53005020-205 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-206 | ALUMINIUM PLATES CALIBRATION STANDARD | 2 | |
| 98S53005020-207 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-208 | ALUMINIUM PLATES CALIBRATION STANDARD | 3 | |
| 98S53005020-209 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-210 | ALUMINIUM PLATES CALIBRATION STANDARD | 2 | |
| 98S53005020-211 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-212 | ALUMINIUM PLATES CALIBRATION STANDARD | 2 | |
| 98S53005020-213 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-214 | ALUMINIUM PLATES CALIBRATION STANDARD | 2 | |
| 98S53005020-215 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-216 | ALUMINIUM PLATES CALIBRATION STANDARD | 2 | |
| 98S53505006000 | Pressure Plate Calibration | 4 | |
| 98S53505006202 | PRESS. PLATE FR. 25 / FR. 27-INTERNAL CALIBRATION | 1 | |
| 99A53003001104 | HOLE PLATE CALIBRATION BLOCK | 4 | |
| 99A53003001107 | HOLE PLATE CALIBRATION BLOCK | 4 | |
| 99V57103002000 | Airbus Calibration Block A350-A-571100-AFAPE3-04J2E-A-001-01 Sheet 01 Page 1-2. Material: Ti-6Al-4V ANNEALED PLATE. Includes Test Report and Certificate of Conformance. | 2 | |
| C02683A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 3.250'' TALL X 1.250" WIDE X 15.50" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| C02699A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 6.250'' TALL X 1.250" WIDE X 24.00" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| E53‐006 | CALIBRATION BLOCK DIMENSIONS 95 X 90 MM, WITH 03 ALUMINUM PLATES, EDM NOTCH 10.6 MM | 1 | |
| F50B955604005 | CALIBRATION PLATE FOR FIN FORWARD FITTING | 1 | |
| F50B955604007 | CALIBRATION PLATE FOR FIN REAR FITTING | 1 | |
| F50B955604009 | CALIBRATION PLATE FOR FUSELAGE FIN FORWARD FITTING | 1 | |
| F50B955604011 | CALIBRATION PLATE FOR FUSELAGE FIN REAR FITTING | 1 | |
| F50B955604013 | CALIBRATION PLATE FOR HORIZONTAL STABILIZER REAR FITTING | 1 | |
| F50B955604017 | CALIBRATION PLATE FOR HORIZONTAL STABILIZER FORWARD FITTING | 1 | |
| RH240-C30M20T20-7075T6 | 24 hole calibration standard, 3/4" - 1 1/2" holes. 030" corner notches, .020 midwall notch, .020" thru-wall, 3 plate stack, 7075T6 | 1 | |
| SB10053115PLATE | CALIBRATION PLATE NDT | 1 | |
| U8800581 | SPECIAL TOOLS (1) USE A NONCONDUCTIVE STRAIGHTEDGE DURING CALIBRATION AND THE INSPECTION (FOR SCAN ROWS 1 AND 4). (2) USE A CIRCLE TEMPLATE DURING THE INSPECTION TO DO SEMICIRCULAR SCANS AROUND THE RIVETS (FOR SCAN ROWS 2 AND 3). (S.NO: MGAT/NDT/001) | 1 | |
| V2 | PH TOOL V2 (A4) CALIBRATION BLOCK, 12.5MM, 1018 STEEL, NICKEL PLATED | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
