| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| G34002-1 | CALIB | 21 | |
| PSD60-2R | CALIB | 27 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) J47346 | CASTELLATED WRENCH (CALIBRATION) | 1 | |
| (CALIB) 0-25 MPA | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 0-38 VDC | POWER REGULATOR 33B760 (CALIBRATION) | 1 | |
| (CALIB) 0-5000 PSI | SCALE DEAD WEIGHT (CALIBRATION) | 1 | |
| (CALIB) 00127-026-000 | MANOMETER FOR WHEEL SERVICE CART (0-10 BAR) (CALIBRATION) | 1 | |
| (CALIB) 00127-028-000 | MANOMETER FOR WHEEL AND NITROGEN SERVICE CART (0-250 BAR) (CALIBRATION) | 1 | |
| (CALIB) 00127-189-000 | MANOMETER FOR BOEING JACK (0-4108PSI) (CALIBRATION) | 1 | |
| (CALIB) 00470-034-000 | GAUGE (CALIBRATION) | 1 | |
| (CALIB) 00610100000 | POLARIZATION KEY EXTRACTION TOOL (CALIBRATION) | 1 | |
| (CALIB) 00610100600 | POLARIZATION KEY EXTRACTION TOOL (CALIBRATION) | 1 | |
| (CALIB) 00960-327-000 | Zug- /Druckkraftaufnehmer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0001-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0001-01 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0185-10 | AVIONICS TEST SET (EFIS) (CALIBRATION) | 1 | |
| (CALIB) 01-0235-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0289-01 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0356-05 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0356-06 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0356-10 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0356-11 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0356-15 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0356-16 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0356-20 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0356-21 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0520-50 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0520-70 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0520-80 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0520-TA | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0574 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0574-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0574-01 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0574-20 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0574-21 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0597-00 | FUEL QUANTITY TEST SET (CALIBRATION) | 1 | |
| (CALIB) 01-0675-01 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0675-02 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0703 -00 | FUEL QUANTITY TEST SYSTEM (CALIBRATION) | 1 | |
| (CALIB) 01-0728-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0728-01 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0728-02 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0728-03 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0728-10 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0728-11 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0728-20 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0762-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0762-20 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-0992-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1001-05 | ANALYZER, DATABUS (CALIBRATION) | 2 | |
| (CALIB) 01-1001-06 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1001-10 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1001-11 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1001-12 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1001-13 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1001-50 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1001-60 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1200-60 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1200-65 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1200-70 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1200-B0 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1200-B1 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1200-B2 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1200-B3 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1201-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1202-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1203-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1204-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1205-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1206-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1400-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1400-00-230 | ARINC 429/CSDB DATABUS (CALIBRATION) | 2 | |
| (CALIB) 01-1401-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1402-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1403-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1403-01 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1403-02 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1403-03 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1404-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1404-01 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1405-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1406-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 01-1407-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 02-7802C0111 | TRONAIR 02-7802C0111 BLUE HYDRAULIC AFT FUSELAGE JACK (12 TON10.8 METRIC TON) (CE) (CALIBRATION) | 1 | |
| (CALIB) 02-7813C0100 | ATR JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 02-7822C0110 | TRONAIR 02-7822C0110 FORWARD TRIPOD JACK HIGH SKID GEAR, 5 TON/4.5 METRIC TON (CALIBRATION) | 1 | |
| (CALIB) 02-7830-0110 | AXLE JACK 25 TON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 02-7854C0110 | AXLE JACK, NLG/MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 020240-01 | AIR PACK DIAGNOSTIC (CALIBRATION) | 1 | |
| (CALIB) 03-160 | PLIERS COMBINATION (CALIBRATION) | 1 | |
| (CALIB) 0397-01-UC | TESTER KIT (CALIBRATION) | 1 | |
| (CALIB) 044A411058D | FIXTURE MLG BORING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 044AF124014D | FIXTURE MLG BORING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 058A029051D | LOCBAR LOCATION BAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 058A029052D | LOCBAR LOCATION BAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 058A029238D | LOCATBAR LOCATION BAR CASE 19 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 06-4005-0511 | UNIT-HYDRAULIC RESERVOIR SERVICING (MIL-H-5606) MINERAL FLUID (CALIBRATION) | 1 | |
| (CALIB) 0602KQC3 | FUEL CAPACITANCE TEST SET (CALIBRATION) | 1 | |
| (CALIB) 0622-19857-02 | TEST TEST SET - VALVE ACTUATING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 07-0728-30 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 07-740-1100 | CADEX, BATTERY ANALYSER (CALIBRATION) | 1 | |
| (CALIB) 07482ASSY9471M46G01 | PORTABLE HYDRAULIC ACTUATOR (CALIBRATION) | 1 | |
| (CALIB) 08-2034-0010 | Stand (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 0987654321 | TEST (CALIBRATION) | 1 | |
| (CALIB) 0MNI2P2PA16128 | Test equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 0MNIPPA16128 | NDT OMNISCAN MXU 2.0 R7 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 0U143742 | CLAW TOOL-CLAW STOP EXTENSION QTY2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 0U145920 | TOOL TOOL-MANUAL CRANKING STOP,THS A (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 0U190686 | BACKLASH BALLNUT BACKLESS CHECKING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 0U190863 | TOOL BACKLASH CHECKING TOOL-THS ACTU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 0U191066 | Setting tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 0U191191 | CHECKING TOOL-BALL SCREW AND TIE BAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 0U300459 | TOOL TOOL-ZERO LOCATION,THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1 | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1 825508 5 | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1-305183-1 | EXTRACTOR TOOL (CALIBRATION) | 1 | |
| (CALIB) 10-0108-00 | CALIBRAITION BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 10-100 | VIPER 4040 (CALIBRATION) | 1 | |
| (CALIB) 10-100-2020HR | TURBO PROBALANCER 2020HR (CALIBRATION) | 1 | |
| (CALIB) 10-101950-81 | SHUNT PLUG - FIRE EXTINGUISHER CARTRIDGE (CALIBRATION) | 1 | |
| (CALIB) 10-16 MPA | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 10/3634C1 | Didsbury Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 10/3641C1 | FISHPOLE HOIST KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 10/3641C1S | FISHPOLE HOIST KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 10/3641C2 | FISHPOLE HOIST KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 10/3641C3 | FISHPOLE HOIST KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 10/3924 | HOIST KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 100-1 | HOIST HOIST, LIGHT WEIGHT - TAPE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 100-200-002 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 100-250-001 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 100-350-001 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 100-400-001 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 100-450-001 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 100-600-001 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 100-602573-001 | COMPUTER INTEGRATER AVIONICS (CALIBRATION) | 1 | |
| (CALIB) 100-650-001 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 100-655005-000 | DISPLAY UNIT PILOT (CALIBRATION) | 1 | |
| (CALIB) 1000005 | SET, RAMP TEST VHF/HF/SELCAL/ATSCALL 1000005 (CTS700 ) (CALIBRATION) | 1 | |
| (CALIB) 1000005-005 | CTS-700 SELCAL/ATSCALL TEST (CALIBRATION) | 1 | |
| (CALIB) 100003 | UNI WEST EDDY VIEW (CALIBRATION) | 1 | |
| (CALIB) 101-00164-605 | BARFIELD ANALOGIC PITOT TEST SET (CALIBRATION) | 1 | |
| (CALIB) 101-00169 | PITOT STATIC TEST SET BARFIELD (CALIBRATION) | 1 | |
| (CALIB) 101-00184 | PITOT STATIC TEST SET (CALIBRATION) | 3 | |
| (CALIB) 101-00212 | PRESION DE COMB. (PRESSURE TESTER (CALIBRATION) | 1 | |
| (CALIB) 101-00260 | FUEL GAGE TEST SET (CALIBRATION) | 2 | |
| (CALIB) 101-00540 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 101-00800 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 101-00802 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 101-00803 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 101-00808 | DC FUEL QTY ADAPTER MODULE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 101-00850 | DIGITAL FUEL QUANTITY TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 101-00855 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 101-00901 | BARFIELD INSTRUMENTS TT1000A TURBINE TEMPERATURE TESTER 101-00901 (CALIBRATION) | 2 | |
| (CALIB) 101-00907 | Adapter-Fuel Return Valve (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 101-01170 | WEIGHING SCALE (CALIBRATION) | 3 | |
| (CALIB) 101-01175 | BARFIELD 101-01175 DIGITAL PITOT STATIC TEST SET, 9 IN L, 22.2 IN W, 14.8 IN H, 32 TO 122 DEG F (CALIBRATION) | 1 | |
| (CALIB) 101-01200 | BARFIELD 101-01200 SIGHT COMPASS, 3 IN L, 2.5 IN W, 3.1 IN H, +/-1 DEG, 0.72 LB (CALIBRATION) | 1 | |
| (CALIB) 1013832 | Detector- gas (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1013833 | GAS DETECTOR (CALIBRATION) | 1 | |
| (CALIB) 1016000-1 | Coolant Service Cart (CSC) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1016000-3 | Coolant Service Cart (CSC) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 10165446 | DETECTOR ALTAIR 5X COLOR DISPL (CALIBRATION) | 1 | |
| (CALIB) 102-03108 | BARFIELD 102-03108 MULTI-CABLE TENSIOMETER, 1/16 TO 1/4 IN DIA, 1-1/2 IN L, 4.38 IN W, 8-3/4 IN H (CALIBRATION) | 1 | |
| (CALIB) 1036735-P3 | OIL FILTER (CALIBRATION) | 1 | |
| (CALIB) 103UFTS | 3PC UNIVERSAL JOINT SET (CALIBRATION) | 1 | |
| (CALIB) 104054-0 | TOOL (CALIBRATION) | 1 | |
| (CALIB) 1047320 | FIBER OPTIC ON WING KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 105-60701W6 | DRIVE SHAFT ASSEMBLY DEVICE (CALIBRATION) | 1 | |
| (CALIB) 105B | Quartz Oscillator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 10C1043G03 | Fixture, Lift - Engine Horinzontal (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 10C1043G04 | ENGINE LIFTING BEAM, CF34-10E (CALIBRATION) | 1 | |
| (CALIB) 10C1113G01 | TOOL (CALIBRATION) | 1 | |
| (CALIB) 10OHME65B00116 | HOISTING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 10T-ICDI | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 11-01-0203 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) 11-20150 | ORIFICE KIT (CALIBRATION) | 1 | |
| (CALIB) 110-0430-100 | RADIO ALTIMETER RAMP SIMULATOR (CALIBRATION) | 1 | |
| (CALIB) 110-0430-100-02 | RADIO ALTIMETER DRA 707B1 (CALIBRATION) | 1 | |
| (CALIB) 110505-1 | UNIVERSAL SHIPPING S (CALIBRATION) | 1 | |
| (CALIB) 110506-201 | ENGINE CRADLE (CALIBRATION) | 1 | |
| (CALIB) 1109 | Analog Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 110MCS | TLCNTNR OVEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 111 | Utility Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 113 | Utility Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 114152-01 | PL2000 (CALIBRATION) | 1 | |
| (CALIB) 115 | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 115-00632 | NOMEN: DPS1000 HOSE KIT (CALIBRATION) | 1 | |
| (CALIB) 115-130-007 | ULTRASONIC SEARCH UNIT PHASED ARRAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1159GSE50575-255 | FUEL QUANTITY PROBE SELECTOR TEST SET (CALIBRATION) | 1 | |
| (CALIB) 116 | Utility Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 11667A | Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 117 | Utility Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1170205.01 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 11722A | Measuring Sensor Module (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 11768-700 | TESTER LATCH UNIT TELAIR (CALIBRATION) | 1 | |
| (CALIB) 1180015.01 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 1197-00-00 | BOOTSTRAP TMH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 11C4319P01 | Rollover Engine Ship Stand (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 11MIT65B04012 | Lock landing gear doors (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 12-1207-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 12-503-26 | BEACON, TEST SET (CALIBRATION) | 1 | |
| (CALIB) 1206GS | 6PC COM DR ADP SET (CALIBRATION) | 1 | |
| (CALIB) 1211.80 | HYD. TRIPOD JACK ATR72/42 MAIN (CALIBRATION) | 1 | |
| (CALIB) 1213 | TRIPOD JACK-NOSE (CALIBRATION) | 1 | |
| (CALIB) 121630-006 | REFLEX CHARGER RF80-K (CALIBRATION) | 1 | |
| (CALIB) 12201893 | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 123020-001 | ANALIZADOR DE BATERIA (CALIBRATION) | 3 | |
| (CALIB) 123456789 | TEST (CALIBRATION) | 1 | |
| (CALIB) 124 | Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 12503734 | TOP (CALIBRATION) | 1 | |
| (CALIB) 125HBL-4-4 | FITTING - HOSE, BARBED BRASS (CALIBRATION) | 1 | |
| (CALIB) 12900N | WORKSHOP VERNIER CALIPER (CALIBRATION) | 2 | |
| (CALIB) 13-6600-3600 | RAT TEST UNIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 13-6606-6600 | GROUND TEST TOOL, A380, RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1324A | HANDLING HANDLING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 14-6807-6011 | GAUGE,TIRE SERVICING (CALIBRATION) | 2 | |
| (CALIB) 14.6805.6010 | STRUT PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 1406R | Gyro Instrument Test Table (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1409-00-2 | UNIT - PORTABLE SOLID STATE DATA TRANSFER (PSSDTU) (CALIBRATION) | 1 | |
| (CALIB) 1411 | Gyro Instrument Test Table (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1412BE | Gyro Instrument Test Table (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1419B | Decade Capacitor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1433F | Decade Resistor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 14455-0100 | CALIPER ELECTRONIC LIMIT (CALIBRATION) | 1 | |
| (CALIB) 1487.70 | TRIPOD JACK 10T (CALIBRATION) | 1 | |
| (CALIB) 15-100-40 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 150-10000-1 | CURLIN-AIR (CALIBRATION) | 1 | |
| (CALIB) 1502C | REFLECTR REFLECTOMETER, CABLE TESTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1507 | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15070-00 | WINGRIP WINGRIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15080-00 | REPAIR WINGRIP AIO PAD KIT (CALIBRATION) | 1 | |
| (CALIB) 1520 | Megohmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15300-00 | WINGRIP WINGRIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15318-00 | WINGRIP WINGRIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15330-00 | WINGRIP WINGRIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15340-00 | WINGRIP WINGRIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15350-00 | WINGRIP WINGRIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15351-00 | WINGRIP WINGRIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15380-00 | WINGRIP WINGRIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1587 | Insulation Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15F2496 | KIT: MOUNT ASSEMBLY, (CALIBRATION) | 1 | |
| (CALIB) 15F2646 | AIR/HYD PUMP ASSEMBLY (CALIBRATION) | 1 | |
| (CALIB) 15F3118 | 5 BOLT HUB/TIRE ASSEMBLY (CALIBRATION) | 1 | |
| (CALIB) 15L14428 | SPACER, LIFT RAIL (CALIBRATION) | 1 | |
| (CALIB) 15L14429 | STEP SPACER: B1 STAND, (CALIBRATION) | 1 | |
| (CALIB) 15L16640 | CHAIN:, (CALIBRATION) | 1 | |
| (CALIB) 15L23700 | HAND RAIL TOOLBOX (CALIBRATION) | 1 | |
| (CALIB) 15O4471 | CASTER, REPLACEMENT (CALIBRATION) | 1 | |
| (CALIB) 15O4689 | FAULTLESS CASTER, (CALIBRATION) | 1 | |
| (CALIB) 15O4864 | STABILIZER JACK, (CALIBRATION) | 1 | |
| (CALIB) 15O5343 | CYLINDER (CALIBRATION) | 1 | |
| (CALIB) 15O5514 | STRAP: PIN,CYLINDER,NYLON, (CALIBRATION) | 1 | |
| (CALIB) 15PRE65B00161 | AXLE SLEEVE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 15W3839 | TOWBAR:, (CALIBRATION) | 1 | |
| (CALIB) 1686 | COMPASS (CALIBRATION) | 2 | |
| (CALIB) 1690-45T | Hydraulic Axle Jack, 45t (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 16934 | RF Power Sensor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 16936 | Peak Power Sensor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 16936 A | Power Sensor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 170-62060-402-11H1 | Elevator Sling RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 170207.02 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 1702173 | Torque Setting Rig (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1702198 | Inhibiting Rig (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 17080A | GTT A350 CALIBRATION RECERTIFICATION ASSESSMENT | 1 | |
| (CALIB) 1709564 | Thread plug gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 170T07097-401 | TOOLS, SET PYLON ALIGNMENT (CALIBRATION) | 1 | |
| (CALIB) 171 | Function Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1735 | Power Logger (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1740A | Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 177 | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 179 | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 17D6003.3 | GAUGE (CALIBRATION) | 1 | |
| (CALIB) 17TES0043 | PORTABLE INTERFACE (PI) (CALIBRATION) | 2 | |
| (CALIB) 17TES0062 | PORTABLE INTERFACE (CALIBRATION) | 1 | |
| (CALIB) 17TES0075 | ETHERNET INTFC (CALIBRATION) | 1 | |
| (CALIB) 17TES0700 | THE READ−OUT CENTER/7 (ROC/7) (CALIBRATION) | 1 | |
| (CALIB) 17TES0901 | RDI - CVR AFDR (CALIBRATION) | 1 | |
| (CALIB) 17TES0960 | RDI FA2100 DFDR DOWNLOAD AND DECOMPRESSION SOFTWARE (CALIBRATION) | 1 | |
| (CALIB) 1811-NG | Pitot Static Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1811D XXX | Pitot Static Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1811E XXX | Pitot Static Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1811FD XXX | Pitot Static Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1811G XXX | Pitot Static Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1811GA XXX | Pitot Static Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1811GA465 | CALIBRATOR PITOT STATIC | 1 | |
| (CALIB) 1811H XXX | Pitot Static Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1811HA XXX | Pitot Static Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1811HAA0A | BARFIELD 1811HAAOA PITOT STATIC TESTER, 14.9 IN L, 15.4 IN W, 9.76 IN H, 24 LB, 20 TO 650 KTS (CALIBRATION) | 1 | |
| (CALIB) 1840A | Audio Output Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1863 | Megohmmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 18631864 | Megohmmeters (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1864 | Megohmmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 187 | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1880 | Megohmmeters (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 189 | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 190506-4 | Lift sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1912A | Universal Frequency Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1953A | Universal Frequency Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1991 | Nanosecond Universal Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1992 | Nanosecond Universal Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 1C8060G05 | DOLLY, CHANGE OUT, LM2500 (CALIBRATION) | 1 | |
| (CALIB) 1TON 45 METER | GEAR TROLLEY (CALIBRATION) | 1 | |
| (CALIB) 1TONX5 METER | CHAIN HOIST (CALIBRATION) | 1 | |
| (CALIB) 2-069 | SIGMATEST 2.069 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2-069-69-0001 | Flex 8mm Taster (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2-069-69-0002 | PROBE FLEXIBLE FOR CONDUCTIVITY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 20-0-20 | METER,FIELD STRENGTH (CALIBRATION) | 1 | |
| (CALIB) 200 | Wide Range Oscillator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2000.00.00.00 | TOW BAR 2000 (CALIBRATION) | 1 | |
| (CALIB) 2001 | Sweep Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2003 RP-230 | AC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2007486 | IDG PUMP (CALIBRATION) | 1 | |
| (CALIB) 200951A | ADAPTER NLG JACK (CALIBRATION) | 1 | |
| (CALIB) 200CD | Wide Range Oscillator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 200SR | Oscillator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 201042189 | QUICK COUPLING (CALIBRATION) | 1 | |
| (CALIB) 201202-CA | BRACE PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 2012B | OSCILLOSCOPE (CALIBRATION) | 1 | |
| (CALIB) 2020-220V-N-EMB314 | 2020HR TURBO PROBALANCER (CALIBRATION) | 1 | |
| (CALIB) 202204 | Phase Angle Voltmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 202BR | Phase Angle Voltmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2030 Opt. 6 | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2030 Standard | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2031 | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2031 Opt. 6 | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2031 Standard | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2032 Opt. 6 | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2032 Series | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2032 Standard | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2035V003 | TEST BOX (CALIBRATION) | 1 | |
| (CALIB) 2040 Opt. 6 | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2040 Standard | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2041 Opt. 6 | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2041 Standard | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2042 Opt. 6 | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2042 Standard | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2050 Opt. 6 | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2050 Standard | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2051 Opt 6 | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2051 Standard | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2052 Opt. 6 | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2052 Standard | AM/FM Signal Generators (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 20538-00 | KIT-TEST, LF ULB (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 20549SI | LOOP-CONTROLLER (CALIBRATION) | 2 | |
| (CALIB) 20667866 | SEXTANT AVIONIQUE 20667866 CONVERGENCE TOOLS (CALIBRATION) | 1 | |
| (CALIB) 206AFSA | 3/8DR 6PC SAE 6PT SHL FLX SKT (CALIBRATION) | 1 | |
| (CALIB) 2080-002 | WATT METER (P) (CALIBRATION) | 1 | |
| (CALIB) 212-92057-0003 | TENSIMETRO EQUIPADO (CALIBRATION) | 1 | |
| (CALIB) 214B | Pulse Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 215371-0 | DIGITAL PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 218-CR2270 | DOOR ADJUSTMENT TOOL (CALIBRATION) | 1 | |
| (CALIB) 21C7085G01 | TESTER (CALIBRATION) | 1 | |
| (CALIB) 21C8208G01 | VEN SYSTEM HYDRAULIC ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 22008510PT | C-YOKE RIVETERS ASSEMBLY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 22097-00 | ULD TESTER (CALIBRATION) | 1 | |
| (CALIB) 22097.00 | ULD TESTER (CALIBRATION) | 1 | |
| (CALIB) 2213 | Analog Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 221357 | PPG SEMCO 221357 MODEL 388 (CALIBRATION) | 1 | |
| (CALIB) 222−00366−0000 | WX RADAR SOFTWARE (CALIBRATION) | 1 | |
| (CALIB) 2240 | SOUND LEVEL METER (CALIBRATION) | 1 | |
| (CALIB) 2245 | Four Channel Analog Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 225 | Phase Angle Voltmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2250 | Digital Analyzing Voltmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2251 | Voltmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 227545-8 | TILT TABLE TILT RANGE: ±90º ENGRAVED INCREMENT ON AZIMUTH AXIS: 1º (CALIBRATION) | 2 | |
| (CALIB) 2311FA | Pressure Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2312G XXX | Turbine Temp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 234025 | AC/DC High Pot Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 235 | Nav/Comm Ramp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2394 | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 23954 | TORQUE EQUIPMENT - VERTICAL FIN, ELECTRICAL-POWERED 230V VERSION. (CALIBRATION) | 1 | |
| (CALIB) 23XT/25XT | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 24045-10 | FRICTION BRAKE PADS (CALIBRATION) | 1 | |
| (CALIB) 24127MP-V1 | CART (CALIBRATION) | 1 | |
| (CALIB) 2416S | DIAL TEST INDICATOR (CALIBRATION) | 1 | |
| (CALIB) 2430A | Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2432 | Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2432A | Two Channel Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 243550-19 | HOSE ASSY (CALIBRATION) | 1 | |
| (CALIB) 2440 | Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2465B | Analog Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2471F | Megohmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 25-D | Element (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2548H | Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2558756 | Drive Tool - Wheel Tachometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2558759 | Tool - Brake Handling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2558892 | HANDLING TOOL, BRAKE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2560 | DIGITAL FREEZER THERMOMETER (CALIBRATION) | 1 | |
| (CALIB) 2560814 | TOOL, HANDLING - BRAKE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2591553-901 | CALIBRATION, STANDBY COMPASS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2591553-903 | STANDBY COMPASS CALIBRATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2591553-906 | STANDBY COMPASS CALIBRATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 26-200 | PLIERS NEEDLE NOSE (CALIBRATION) | 1 | |
| (CALIB) 260 | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2631A5 | TAP AND DIE SET (CALIBRATION) | 1 | |
| (CALIB) 2643G | FUEL GAGE TEST SET (CALIBRATION) | 2 | |
| (CALIB) 2650 | PLIERS CONNECTOR (CALIBRATION) | 1 | |
| (CALIB) 2656G | Altitude Encoder Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 27 | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 27-B37-1594 | 737 PROXIMITY SENSOR BREAKOUT (CALIBRATION) | 1 | |
| (CALIB) 2712 | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2743638 (150-1000 IN.LBS) | TORQUE WRENCH BR64469 TOOL CALIBRATION REMARK : INCLUDE ATTACHED (CALIBRATION) | 1 | |
| (CALIB) 2753P | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2801787 | INSECTION KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 281149T01R01 | TOOLKIT TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2837 | DEFECTOMETER (CALIBRATION) | 1 | |
| (CALIB) 285046T01R00 | TOOLKIT TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 285372-1-1 | CURVIC MASTER TOOL (CALIBRATION) | 1 | |
| (CALIB) 285373-1-1 | GAUGE, CURVIC, CONVEX (CALIBRATION) | 1 | |
| (CALIB) 286028T01 | TOOLKIT TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 287041-1 | GAUGE CURVIC COUPLING CONVEX (CALIBRATION) | 1 | |
| (CALIB) 287042-1 | GAGE CURVIC COUPLING CONCAVE (CALIBRATION) | 1 | |
| (CALIB) 289 | RMS Multimeter (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 289588-1 | CURVIC GAGE (CALIBRATION) | 1 | |
| (CALIB) 289589-1 | GAGE CURVIC CONVEX (CALIBRATION) | 1 | |
| (CALIB) 289663-1 | TOOL (CALIBRATION) | 1 | |
| (CALIB) 289664-1 | GAGE CURVIC (CALIBRATION) | 1 | |
| (CALIB) 290122-500 | TESTER APU.. (CALIBRATION) | 1 | |
| (CALIB) 290F | Capacitance Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 293-676N | DIGITAL MICROMETER (CALIBRATION) | 1 | |
| (CALIB) 293-677N | DIGITAL MICROMETER (CALIBRATION) | 1 | |
| (CALIB) 29333305 | RAD KIT (CALIBRATION) | 1 | |
| (CALIB) 29333306 | RADS-AT (CALIBRATION) | 2 | |
| (CALIB) 295296-1 | CURVIC COUPLING GAGE (CALIBRATION) | 1 | |
| (CALIB) 295296-2 | CURVIC COUPLING GAGE (CALIBRATION) | 1 | |
| (CALIB) 2979-010 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 299897-0 | DIGITAL PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 29AD40 | DIGITAL CALIPER 0-12 (CALIBRATION) | 1 | |
| (CALIB) 29Z129 | DIAL DEPTH GAUGE (POINTED) (CALIBRATION) | 1 | |
| (CALIB) 2AB-7852-2514, SEALING RING | SEALING RING (CALIBRATION) | 1 | |
| (CALIB) 2C14130G07 | Fixture, Lift - Engine Horinzontal (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2C5122P01 | FIXTURE, LPT ROTOR SEATING CHECK (CALIBRATION) | 1 | |
| (CALIB) 2C5186P01 | FIXTURE, HPT ROTOR SEATING CHECK (CALIBRATION) | 1 | |
| (CALIB) 2C6487G01 | PROTRACTOR ELECTRONI (CALIBRATION) | 1 | |
| (CALIB) 2C6983P06 | Cowling Pump (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2C6983P08 | Cowling Pump (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2C6983P09 | PUMP PUMP-HAND, COWL DOOR ACTUATOR-F (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2MIT65B80174 | LOCK ASSY - DOOR, BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2OHME65B00780-1 | SLING APU REAR MOUNT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2OHME65B00784-1 | Support APU - exhaust pipe (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2OHME65B01465 | Sling Nose landing (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2OHME65B07630 | SLING WINDASHIELD I/R (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 2SDR-501 | TORQUE METER (CALIBRATION) | 2 | |
| (CALIB) 2ZUH1 | DIAL DEPTH GAUGE (POINTED) (CALIBRATION) | 1 | |
| (CALIB) 30-506 | CRIMPMAST (CALIBRATION) | 1 | |
| (CALIB) 30.5000.02 | HYGROMETER (CALIBRATION) | 1 | |
| (CALIB) 3000 | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 30006-0035 | DYNAMOMETER (CALIBRATION) | 1 | |
| (CALIB) 30006-0043 | DYNAMOMETER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 30006-0050 | DYNAMOMETER (CALIBRATION) | 1 | |
| (CALIB) 30006-0068 | DYNAMOMETER (CALIBRATION) | 1 | |
| (CALIB) 30006-0167 | DYNAMOMT DYNAMOMETER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 300220 | Coaxial Directional Coupler (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 300AGTI | MANOMETER (CALIBRATION) | 2 | |
| (CALIB) 300ATI | MANOMETER (CALIBRATION) | 2 | |
| (CALIB) 30100 | PORTABLE DATA LOADER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3028000 | CLINOMTR CLINOMETER (GUNNERS QUADRANT) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 302801001 | CLINOMTR CLINOMETER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 30400101 | Pressure Gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 30446-0033 | X/FGCOMP. INSPECTION EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) 3076465-01 | ENGINE FUEL NOZZLE KIT 400 (CALIBRATION) | 1 | |
| (CALIB) 30892-131-715J | DIAL BORE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 3089M-181-18J | DIAL BORE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 31-111-100 | Test device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 31-195-100 | SIMULATR SIMULATOR FOR TESTING COMPASS C (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 31-200-100 | TESTSET TEST SET - THS POSITION TRANSMI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 31-324-100 | TEST SET AUTO FUELFEED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 31-324-200 | TEST SET AUTO FUELFEED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 31-324-203 | TEST SET AUTO FUELFEED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 31-37-100 | ZEROING ZEROING-EQUIPMENT SYNCHRO RESOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 31-590-100 | ZEROING ZEROING-EQUIP SYNCHRO-RESOLVERS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 31-MUL-1143 | SINGLE SPEED SIMULATOR (CALIBRATION) | 1 | |
| (CALIB) 311-4N | NITROGEN REDUCER (CALIBRATION) | 1 | |
| (CALIB) 3111-DAS | DIGITAL ALMEN GAGE (CALIBRATION) | 1 | |
| (CALIB) 31171-000-002 | SG239 Light Maintenance Crane - Adapter Front LCV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 320008B-S0 | TIRE DEFLATION TOOL (CALIBRATION) | 1 | |
| (CALIB) 3204-0001-000 | Lifting Beam (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3207 | Micrometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 32585-19 | DIAL TEST INDICATOR (CALIBRATION) | 1 | |
| (CALIB) 33-203 | MEASURING TAPE (CALIBRATION) | 1 | |
| (CALIB) 331 | DME Check 1 Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 33120A | Waveform Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3312A | Function Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 332 | ATC Check 1 Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 33220A | Waveform Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 33250A | Function/Arbitrary Waveform (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3325A | Synthesizer Function Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3325B | Synthesizer Function Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 334 | Distortion Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 33611A | Waveform Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 337 | Camp Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 339A | Distortion Measurement Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3403149-1 | INSP. TOOL (CALIBRATION) | 1 | |
| (CALIB) 3403241-1 | ADJUSTER ASSY, OUTER WING SLING KIT (CALIBRATION) | 1 | |
| (CALIB) 3409536 | Gun Oil Replenishing (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A1-6KN1 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A1-6MN4 | LOAD CELL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A100KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A10KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A160KN1 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A160KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A16KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A1MN3 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A250KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A25KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A400KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A40KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A4KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A6-3KN1 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A6.3KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343A63KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 343AG31MN | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 34401A | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3456A | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3465A | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 34901A | 30 Channel Multiplexer Module (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 34970A | Switch (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35 DN0200 | Airspeed Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3500 | METER PORTABLE RF POWER METER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3500/A | Radio Comm Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 351 | Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 351-2100-14GSE | FAN COWL HANDLING SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 351-3000-26GSE | Thrust reverser PRD Latch (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 351-3000_12GSE | T/R MANUAL HYDRAULIC OPENING SY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 351-3000_6GSE | R/I THRUST REVERSER SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 351-3000_7GSE | THRUST REVERSER DOLLY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 351-5010-19GSE | FWD CENTERBODY HANDLING AID (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 351-7000-2GSE | Inlet Cowl Dolly (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3515 | Radio Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3515AR | Portable Radio Communications Test (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3515ARM | RADIO TEST SYSTEM (CALIBRATION) | 1 | |
| (CALIB) 3550R | Radio Comm Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 355M03050000 | Test device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 355M03190000 | WHEEL TACHYMETER DRIVING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 355M03190001 | WHEEL TACHYMETER DRIVING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 355M03200001 | TOOL - 28 VDC POWER SUPPLY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 355M03200003 | POWER SUPPLY TOOL 28 V DC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 355M03200004 | TOOL-28 VDC POWER SUPPLY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 355M03210000 | CHECKING TOOL-DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35677A | S-Parameter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3575A | Gain/Phase Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3577A | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3577B | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3580A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3582A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3585A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35DR01501 | TORQUE METER (CALIBRATION) | 1 | |
| (CALIB) 35M5M01040001 | SIMULATR WHEEL SPEED SIMULATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35M5M01060000 | SIMULATR SIMULATOR, ALPHA PROBES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35M5M01080001 | ADJUSUNI ADJUSTER UNIT - BRAKE PEDAL TRA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35M5M01120001 | TESTSET TEST SET - AIDS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35M5M01123700 | TESTSET TEST SET AIDS FOR FDAU P N:2222 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35M5M01124300 | TESTSET TEST SET AIDS FOR DFDAMU PN 604 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35M5M01130000 | TEST SET - SMOKE DETECTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35M5M01140001 | TEST DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 35M5M01160001 | ADJUSTTL SETTING TOOL-MICROSWITCH UNIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3600-M3 | PITOSTATIC TESTER & ACCESSORY KIT (REV.C6) (CALIBRATION) | 1 | |
| (CALIB) 3600DW7E | LOAD MASTER 3600DW7E (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3600DW7FA | LOAD MASTER 3600DW7FA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 361-012-001 | TESTER TESTER-FUEL SYSTEM-GULL (MODEL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 361-015-001 | GTF-6 CAPACITANCE TEST SET (CALIBRATION) | 2 | |
| (CALIB) 361012-001 | TEST SET, FUEL SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 36122 | ADAPTOR-CHARGING, PITOT PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3634A | Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3692-7 | HELICOIL TOOL (CALIBRATION) | 1 | |
| (CALIB) 37 10 34 | LIM Medium Power Fixed Coaxial (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 37 20 34 | Attenuator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 370 | Digital Pressure Gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 374TS101-1 | (CALIBATION) SET - TEST, BATTERY DISCHARGE (CALIBRATION) | 1 | |
| (CALIB) 3774 | Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 38-368-02 | UNIT UNIT-TEST,SENSOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 380460 | Milliohm Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 380560 | Milliohm Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3856 | GAGE (CALIBRATION) | 1 | |
| (CALIB) 3893-3 | HELICOIL TOOL (CALIBRATION) | 1 | |
| (CALIB) 391002 | HOCKING LOKATOR 2 (CALIBRATION) | 1 | |
| (CALIB) 3920 | Digital Radio Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 393 | Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3A2984-1 | PIN-SAFETY, SLIDE AND SLIDE/RAFT (CALIBRATION) | 1 | |
| (CALIB) 3ME65B05730-1 | Lock assy outboard elevator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3ME65B05730-2 | Lock assy outboard elevator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 3SDR-1501 | TORQUE METER (CALIBRATION) | 1 | |
| (CALIB) 3SDR01501 | TORQUE METER (CALIBRATION) | 1 | |
| (CALIB) 400-045500-0005 | DMU INTERNAL BATTERY REPLACEMENT (CALIBRATION) | 1 | |
| (CALIB) 4000-220 | IFR4000 NAV/COMM TEST SET (CALIBRATION) | 1 | |
| (CALIB) 4002-I-DTT | DIGITAL TORQUE TESTER (CALIBRATION) | 1 | |
| (CALIB) 400EL | AC Voltmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 401-10100 | LP SPIGOT COMPLETE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 401003 | PHASES 2D (CALIBRATION) | 1 | |
| (CALIB) 401013 | HOCKING PHASEC 3D (CALIBRATION) | 1 | |
| (CALIB) 4011A | Function Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4014948901 | STARS Troubleshooter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4024136902 | STARS Troubleshooter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4040124-002 | RIG RIG, PORTABLE - FILLING, LIQUID (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4040A | Function Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 404190-3 | DOLLY ENGINE (CALIBRATION) | 1 | |
| (CALIB) 4047505-424 | ADTS (CALIBRATION) | 1 | |
| (CALIB) 406800 | Differential Pressure Manometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 40I003 | PHASEC 2D (CALIBRATION) | 1 | |
| (CALIB) 41/5 | Hoist Minilift (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 41800A | Active Probe (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 42/649 | Cable winch compl. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4210101-4-4-4-48 | HOSE ASSY (CALIBRATION) | 1 | |
| (CALIB) 429 | 429 ARINC Databus Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 429-2 | ARINC 429 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 429E | ARINC 429 TX/RX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 429EB | ARINC 429 TX/RX w/Boeing (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 429EBP | ARINC 429 TX/RX Boeing + Printer (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 429EBP(01-100 | ARINC 429 DATA BUS ANALYZER (CALIBRATION) | 1 | |
| (CALIB) 429EBP(01-1001-12/882) | ARINC 429 DATA BUS ANALYZER (CALIBRATION) | 1 | |
| (CALIB) 429EBP-220 (01-1001-12/882) | ARINC 429 DATABUS ANALYZER (CALIBRATION) | 1 | |
| (CALIB) 429EN | ARINC 429 TX/RX Portable (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 429EX | ARINC 429 Databus Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 429EXR | Rackmountable ARINC 429EX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 42A12-1 | Ultrasonic Test Test (CALIBRATION) (CALIBRATION) | 4 | |
| (CALIB) 42A12/1 | ULTRASON ULTRASONIC TEST SET (CALIBRATION) (CALIBRATION) | 4 | |
| (CALIB) 42A12A | Ultrasonic Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 42A12D | ULTRASON ULTRASONIC TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 42A12E | ULTRASONIC TEST SET - ROHS COMPLIANT (CALIBRATION) | 1 | |
| (CALIB) 42B C | Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 43 | Wattmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 43/1381 | MINILIFT HOIST FOR R/I OF REFUELLING PODS (CALIBRATION) | 1 | |
| (CALIB) 4304A | WATTMETER (CALIBRATION) | 1 | |
| (CALIB) 4306065051-1000 | TPMS-LINE TESTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 432A | Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 436A | Digital RF Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4378 | LOCATOR FOR CRIMP TOOL (CALIBRATION) | 1 | |
| (CALIB) 438A | Dual Channel Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4391 | Wattmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4395A | Spectrum / Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4396A | Spectrum / Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4400-0001-000 | T1000 ENGINE STAND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4402-0001-000 | T1000 ENGINE STAND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 440Y 14 | 980I-1/1A Plug In (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4431 | WATT METER 5165 BIRD (CALIBRATION) | 1 | |
| (CALIB) 445703 | THERMO HYGROMETER (CALIBRATION) | 1 | |
| (CALIB) 445815 | THERMO HYGROMETER (CALIBRATION) | 2 | |
| (CALIB) 44A | Wattmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 45 | Dual Display Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 45001-003-100 | Pillar assy. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 450266081 | TOOL (CALIBRATION) | 1 | |
| (CALIB) 450266800 | TOOL (CALIBRATION) | 1 | |
| (CALIB) 460005832 | SPRING SPRING EXPANDER-MLG SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460005835 | SLEEVE SLEEVE - GROUND LOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460005842 | LAMP LAMP BOX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460006211 | Lifting Tackle (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007000 | GAG GAG - SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007001 | CLAMP CLAMP - SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007008 | GAG GAG - BRAKE ROD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007009 | COLLAR COLLAR - LEG SUPPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007011 | Axle Nut (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007015 | TOOL (CALIBRATION) | 1 | |
| (CALIB) 460007027 | MULTIPLE TORQUE-MULTIPLIER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007157 | SPANNER SPANNER - R ACTR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007169 | COMPRESS COMPRESSOR - SPRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007170 | EXPANDER EXPANDER-SPRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007175 | GAG GAG-BOGIE BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007199 | GAG GAG, SHOCK ABSORBER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007280 | Securing clamp (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007305 | GAG GAG-SHOCK ABSORBER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007316 | GAG GAG-BOGIE BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007317 | RESTRNT RESTRAINT - BELLCRANK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007319 | REACTOR TUBE - REACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007325 | GAG GAG-SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007326 | CLAMP CLAMP-SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007327 | CLAMP CLAMP-SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007328 | EXPANDER EXPANDER - SPRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 460007393 | TOOL TOOL - CHECKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 46121 | CRIMPING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 46223 | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 46600-11 | LOCK ACTUATOR ASSEMBLY (LH) (CALIBRATION) | 1 | |
| (CALIB) 47386 | CRIMPING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 473862 | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 47387-2 | CRIMPING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 475 3 Mark III | Handheld Digital Manometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 475612 | FIREX CARGO SQUIB CIRCUIT TEST (CALIBRATION) | 1 | |
| (CALIB) 475A | Dual TraceOscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 475D 1 | DME Ramp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 477U 2 | ADF Antenna Simulator Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 477V 2 | ADF Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 478A | Coaxial Thermistor Mount (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 478A-3 | Zifor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 479S 6A | VOR/ILS Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 479V 3 | Universal Precision Track Selector (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 48 20 43 | Attenuator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4831 | Output Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4842-5000-00 | POU MOUT ALIGNMENT JIG (CALIBRATION) | 1 | |
| (CALIB) 48518 | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4900002000001 | MEASURE TOOL-TENSION BELT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4900002000002 | Measuring device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 496 | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 496P | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 4MIT65B80307-1 | PROTRACTOR ASSEMBLY, CONTROL COLUMN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5004-55 | NOSE WHEEL JACK (CALIBRATION) | 1 | |
| (CALIB) 500PSIXP21 | T88448 PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 501-I-DTT | DIGITAL TORQUE TESTER (CALIBRATION) | 1 | |
| (CALIB) 50200601-N-S | INJECTOR CALIBRATION HOLES (CALIBRATION) | 1 | |
| (CALIB) 508668-201 | SYSTEM DIAGNOSTIC TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 508668-201 | SYSTEM DIAGNOSTIC TOOL (CALIBRATION) | 1 | |
| (CALIB) 508987-401 | AMSAFE AAIR SYSTEM DIAGNOSTIC TOOL – TYPE II KIT (CALIBRATION) | 1 | |
| (CALIB) 508AL016844B | Cradle (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5102 | Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 513-518 | DAIL GAUGE (CALIBRATION) | 1 | |
| (CALIB) 5132121002 | SPECIAL INSERT QUICK CAL (CALIBRATION) | 1 | |
| (CALIB) 5136109028 | ANALYZER BALANCERAND VIBRATION; PROP DYN (CALIBRATION) | 1 | |
| (CALIB) 51500-100 | LATCH TESTER (CALIBRATION) | 2 | |
| (CALIB) 518MC | Measuring device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 520AL833178D | SUB M PT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 522-4610-004 | RADIO ALTIMETER TEST SET (CALIBRATION) | 1 | |
| (CALIB) 523199-3 | ELEC PUMP, HYDRAULIC - FOOT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 525A | Temperature & Pressure Calibrator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 525B | Temperature & Pressure Calibrator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 526640361 | TIRE PRESSURE TESTER 0-18 BAR /0-260 PSI (CALIBRATION) | 1 | |
| (CALIB) 530-101 | TESTER TESTER-LEAK, GALDEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 530-102 | TESTER TESTER-LEAK, GALDEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5301-79 | CORASDEV CORAS DEVICE - RESISTIVITY TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5310 | Programmable Synchro Resolver (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 531128FTI | Tool Kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 53130T01 | TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 53131A | Universal Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 53132A | Universal Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 53181A | Frequency Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5323A | Automatic Frequency Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5328A | Universal Frequency Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5328B | Universal Frequency Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 535AHM2-5T | SHACKLE CELL FOR J78004-123 GE90 SLING EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) 536A | COAXIAL FREQUENCY METER HEWLETT (CALIBRATION) | 1 | |
| (CALIB) 53808332 | Power measuring device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5384A | Frequency Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5390-F1 | RADIO FREQUENCE SYNCHRO/RESOLVER (CALIBRATION) | 1 | |
| (CALIB) 54 II | Thermometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5406A | FREQUENCY COUNTER HP-5343A (CALIBRATION) | 1 | |
| (CALIB) 5410 | ELT Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5410 MKII | ELT Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 54112D | Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 543-1 | GENERATOR - RANDOM NOISE, AUDIO OUTPUT (CALIBRATION) | 1 | |
| (CALIB) 54504A | DIGITIZING OSCILLOSCOPE HP MOD 54504A (CALIBRATION) | 1 | |
| (CALIB) 5471100-014 | TEST SET, STALL WARNING GRD (CALIBRATION) | 1 | |
| (CALIB) 55-0762-55 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 55-1202-11 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 55-1203-01 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 55-1203-02 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 55-1203-03 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 55-1203-09 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 55-1203-10 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 551024T01 | TOOLKIT TOOL KIT, STABILIZER-ELEVATOR T (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 555005T01R00 | Tool kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 55688 | MALABAR HAND-OPERATED HYDRAULIC ACTUATOR PUMP (CALIBRATION) | 1 | |
| (CALIB) 55771S0000 | TOOL TOOL-BACKLASH CHECKING - SLAT S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 558-1-05903 | EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 558-1-30220 | TOOL TOOL-FUEL FEED PUMP R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5612 | Frequency Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 56193-3-2 | HELICOIL TOOL (CALIBRATION) | 1 | |
| (CALIB) 568 | Hi Pot Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 573053T01R02 | TOOLKIT TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 574060T01 | TOOLKIT TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 583 A | Power Output Wattmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5838045-1 | APU TRANSPORTATION, REST, STORAGE DOLLY/CART (CALIBRATION) | 1 | |
| (CALIB) 58422-1 | ELEC CRIMPING,HEAD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 584951 | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 5L4N | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 60-3200-0005 | TESTER, UFI (CALIBRATION) | 1 | |
| (CALIB) 60-3200-0010 | ADAPTERS - FUNCTIONAL TEST BOX ( 2 CABLES ) (CALIBRATION) | 1 | |
| (CALIB) 600-000-310 | GENERATOR - AUDIO, PINK NOISE (CALIBRATION) | 1 | |
| (CALIB) 600-058 | Hand banding tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6000-110/2/3/T/S | IFR 6000 (CALIBRATION) | 1 | |
| (CALIB) 6000-1100PT2 | IFR-6000 TRAN/DME RAMP TEST SET (CALIBRATION) | 2 | |
| (CALIB) 6000-220 | IFR TEST BOX (CALIBRATION) | 1 | |
| (CALIB) 6000-220/2/3/T/S | IFR6000 MODE A/C/S (CALIBRATION) | 2 | |
| (CALIB) 6000133343 | MEASURING EQUIPMENT - BRAKE PEDAL(SINGLE PEDAL) (CALIBRATION) | 1 | |
| (CALIB) 60024-00 | WING SAFETY ROPE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6004MFRMH | MICRO-ADJUSTABLE CLICK TYPE TORQUE WRENCHES ( SQUARE DRIVE: 3.4" )( TORQUE RANGE: 100-600 FT.-LBS. )( INCREMENTS: 5 ) (CALIBRATION) | 2 | |
| (CALIB) 601075-1 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) 60159-101 | ADAPTER-CABLE AY, ELECTRIC (CALIBRATION) | 1 | |
| (CALIB) 6021-1054 | TIME DOMAIN REFLECTOMETER (CALIBRATION) | 1 | |
| (CALIB) 6021-5154 | REFLECTOMETER TIME DOMAIN (CALIBRATION) | 1 | |
| (CALIB) 604-285 | DUALSCOPE MP20 (CALIBRATION) | 1 | |
| (CALIB) 6060A (10-50 IN.LBS) | TORQUE WRENCH 0513060458 TOOL CALIBRATION REMARK : INCLUDE ATTACHED (CALIBRATION) | 1 | |
| (CALIB) 6064C (40-200 IN.LBS) | TORQUE WRENCH DMA 03734 TOOL CALIBRATION REMARK : INCLUDE ATTACHED (CALIBRATION) | 1 | |
| (CALIB) 6066C (100-1,000 IN.LBS) | TORQUE WRENCH DME 27173 TOOL CALIBRATION REMARK : INCLUDE ATTACHED (CALIBRATION) | 1 | |
| (CALIB) 606A | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6080A | Synthesized Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6082A | Synthesized Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 60P10 | Axle Jack 60ton (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 610007AB | USFFLUX TOOL-MEASURE,HYDRAULIC FLOW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 61007010-01 | ULTRASONIC HYDRAULIC FLOW METER (CALIBRATION) | 1 | |
| (CALIB) 61007010-1 | TOOL ULTRASONIC HYDRAULIC FLOWMETER MODEL 610007AR (CALIBRATION) | 1 | |
| (CALIB) 61007030 | USF FIRMWARE FOR LR (CALIBRATION) | 1 | |
| (CALIB) 61007040-01 | Firmware für A350-900 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 611 | Wattmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 612 A79 | Directional Coupler (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 612A79 | DIRECTIONAL COUPLER (CALIBRATION) | 2 | |
| (CALIB) 6151999 | ALLAN KEY SET (CALIBRATION) | 1 | |
| (CALIB) 615717 | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6200 | Pitot Static Test Set (Non-RVSM) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 621100 | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6222M46 | ACCELEROMETER (CALIBRATION) | 1 | |
| (CALIB) 6227B | Dual DC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6250 | LAVERSAB 6250 RVSM AIR DATA TEST SET (CALIBRATION) | 1 | |
| (CALIB) 625782 | EV600 LED UV LAMP KIT (CALIBRATION) | 1 | |
| (CALIB) 6259B | DC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6260B | DC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6261B | DC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6268B | DC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6269B | DC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6270-W | RVSM (MANUFACTURER: LAVERSAB INC.) (CALIBRATION) | 1 | |
| (CALIB) 6283102-1 | CESSNA STANDARD (CALIBRATION) | 1 | |
| (CALIB) 6300 | Automated Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6300L | Automated Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 636-1000_29GSE | ENGINE MOUNT HOISTING DEVICE FW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 636-1000_30GSE | ENGINE MOUNT HOISTING DEVICE AF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 636-1100_1GSE | INLET COWL SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 636-2000_17GSE | FAN COWL HANDLING SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 636-3000_10GSE | TR HOLD OPEN STRUST TO PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 636-3000_13GSE | TR HOLD OPEN STRUST TO PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 636-3000_7GSE | TR HOLD OPEN STRUST TO PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 63625K95 | CLAMP KNOB (CALIBRATION) | 1 | |
| (CALIB) 64-1APH | HYDRAULIC JACK – HAND (CALIBRATION) | 1 | |
| (CALIB) 64001-00 | KIT,AIRCRAFT WEIGHING (CALIBRATION) | 1 | |
| (CALIB) 64001-0215 | AIRCRAFT WEIGHT KIT (CALIBRATION) | 1 | |
| (CALIB) 64001-04 | ELECTRONIC WEIGHING KIT (CALIBRATION) | 1 | |
| (CALIB) 64001-05J5-CE | EQUIPO ELECTRÓNICO PARA PESAJE DEL AVIÓN (CALIBRATION) | 1 | |
| (CALIB) 64001-05J5CE | JACK POINT AIRCRAFT WEIGHING SYS/ (CALIBRATION) | 1 | |
| (CALIB) 64001-06 | JETWEIGH AIRCRAFT WEIGHING KIT (CALIBRATION) | 1 | |
| (CALIB) 64001-14J5 | JW-500 WEGGING CELL (CALIBRATION) | 2 | |
| (CALIB) 642-3802-523 | "COWL-THRUST REVERSER DOOR ASSY-RH" (CALIBRATION) | 1 | |
| (CALIB) 642S | NOSE WHEEL JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6450-10 | Automated Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 65-277 | Voltmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 650-0300 | IFE SERVER (CALIBRATION) | 1 | |
| (CALIB) 650-0310 | RSU II DOCKING STATION (CALIBRATION) | 1 | |
| (CALIB) 6500 | Automated Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6501 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6580 | Automated Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6583102-1 | CALIBRATION BLOCK (CALIBRATION) | 1 | |
| (CALIB) 65P10AR | AXLE JACK MALABAR 65 TON (CALIBRATION) | 1 | |
| (CALIB) 6600 | Automated Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6600-270024-121 | AOA VANE ALIGN LEVEL KIT (CALIBRATION) | 1 | |
| (CALIB) 6600-NG | Automated Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6610 | Gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6611B | AC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6612B | DC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6613B | AC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 666/20 | TORQUE METER (CALIBRATION) | 1 | |
| (CALIB) 6680-00-403-5991 | TACHOMETER TESTER. NATO STOCK NUMBER IS N-11-ECS MODEL 2B. (CALIBRATION) | 1 | |
| (CALIB) 670 | BITSHOLDER LARGE (CALIBRATION) | 1 | |
| (CALIB) 6796089 | ATTACHMENT (CALIBRATION) | 1 | |
| (CALIB) 6796529 | WRENCH-SPANNER, TURBINE REAR BEARING CAMP NUT (CALIBRATION) | 1 | |
| (CALIB) 6796530 | SOCKET WRENCH FACE SPANNER (CALIBRATION) | 1 | |
| (CALIB) 6796533-3 | SPANER (CALIBRATION) | 1 | |
| (CALIB) 6796535 | ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 6798233M | TEST SET,ELECTRONIC TEMPERATURE DATUM CONTROL (CALIBRATION) | 1 | |
| (CALIB) 6798242 | RETAINER (CALIBRATION) | 1 | |
| (CALIB) 6799323 | THERMOCOUPLE TESTER (CALIBRATION) | 1 | |
| (CALIB) 6799620 | ADAPTER Â LIFTING, TURBINE UNIT ASSEMBLY NOTE: SUPERSEDED BY 23032998 FOR T-56-A-7A(N), 10WA, 14, (CALIBRATION) | 1 | |
| (CALIB) 6799621 | WRENCH (CALIBRATION) | 1 | |
| (CALIB) 6799622 | PULLER, REAR TURBINE BEARING AND SEAL (CALIBRATION) | 1 | |
| (CALIB) 6799641 | PUSHER (CALIBRATION) | 1 | |
| (CALIB) 6799642 | PULLER (CALIBRATION) | 1 | |
| (CALIB) 6799708 | FIXTURE ALIGNMENT (CALIBRATION) | 1 | |
| (CALIB) 6799725 | MANDREL (CALIBRATION) | 1 | |
| (CALIB) 68000278-3 | GENERICO SQUIB TEST SET (CALIBRATION) | 1 | |
| (CALIB) 6811B | AC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 682003008 | CONTROL CONTROL UNIT-RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 68D010010-1001 | ADAPTER, AIRCRAFT JACKING POINT (CALIBRATION) | 1 | |
| (CALIB) 69001074-070 | EXTENDED HANDHELD DOWNLOAD UNIT EH-HDLU (CALIBRATION) | 1 | |
| (CALIB) 69099 | HEAD HEAD,CRIMPING-DYNA-CRIMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 69120-1 | ELEC UNIT, HYDRAULIC POWER - DYNA-CR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 69120-2 | ELEC UNIT, HYDRAULIC POWER - DYNA-CR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 691401 | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6920B | AC/DC Meter Calibrator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 69355 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) 69710-1 | CRIMPING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 6B34 | LANDING COMPASS (CALIBRATION) | 1 | |
| (CALIB) 6SD800NM | Torque Wrench (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 70 Series | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 700-T-039-79ATG | AFT AUX FUEL TANK DRAINAGE TOOL 737 NG (CALIBRATION) | 1 | |
| (CALIB) 700-T-101-9 | DOLLY ASSEMBLY (CALIBRATION) | 1 | |
| (CALIB) 70000 Series | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 700–T-048–9 | FUEL CELL EXTRACTION TOOL (A) (CALIBRATION) | 1 | |
| (CALIB) 700–T039–79 | FUEL CELL SUMPING PROBE AFT (CALIBRATION) | 1 | |
| (CALIB) 700–T039–89 | FUEL CELL SUMPING FUNNEL (CALIBRATION) | 1 | |
| (CALIB) 7011 | HANDHELD ENGINE OIL REPLENISHING PUMP (CALIBRATION) | 1 | |
| (CALIB) 703A94-3200-01 | STEADY CONTROL (CALIBRATION) | 1 | |
| (CALIB) 70974 | FLAT CHISEL (CALIBRATION) | 1 | |
| (CALIB) 714 | Thermocoupler Calibrator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 718-1389-465 | DATA BASE (CALIBRATION) | 1 | |
| (CALIB) 718-1390-037 | SOFTWARE (CALIBRATION) | 1 | |
| (CALIB) 718-1431-005 | START PROGRAM (CALIBRATION) | 1 | |
| (CALIB) 7200 | Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 72070500 | OVEN DOUBLE STEAM (CALIBRATION) | 1 | |
| (CALIB) 722091 | TESTSET TEST SET - FUEL LEVELLING SYSTE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 72418 | NAV/COMM TEST SET (CALIBRATION) | 1 | |
| (CALIB) 72422 | TRANSPONDER XPDR/TCAS/DME (CALIBRATION) | 1 | |
| (CALIB) 727737 | Fuel Gauging Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 73 Series | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 730N/10 | 730N/10 T/WRENCH 20-100NM (CALIBRATION) | 2 | |
| (CALIB) 730NR/5FK | 730N + 3/8 RATCHET 10-50NM (CALIBRATION) | 2 | |
| (CALIB) 74-140 | PLIERS CUTTER (CALIBRATION) | 1 | |
| (CALIB) 74-200 | PLIERS CUTTER (CALIBRATION) | 1 | |
| (CALIB) 753970A | CSD IDG SYSTEM LEAK TESTER (CALIBRATION) | 1 | |
| (CALIB) 76 | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 77 II | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 77 Series | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 776236-01 | V2 TESTR-LI-ION BATT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 781019-0 | ELEC HYDR.FOOT PUMP WITHOUT PRESSURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 787 | Processmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 79 III | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 794FM | Variable Attenuator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 79V 3 | Universial Precision Track Selector (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 79V-3 | Universial Precision Track Selector (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 7C2011G02 | Fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 7K800256D044 | REBORING REBORING TOOL - GEAR RIB 5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 7K802812D058 | TOOL TOOL, ALIGNMENT - GEAR RIB 5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 7K802813D058 | TOOL TOOL, ALIGNMENT - GEAR RIB 5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 7K804427D520 | Crane attachment-Wing lifting bracket (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 7L14 | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8-397-01 | SINGLE CHANNEL PROXIMITY SWITCH (CALIBRATION) | 1 | |
| (CALIB) 800 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8000 | Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8000A | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-029 | FTIKIT FTI TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-643 | CONSUMBL CONSUMABLE TOOLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-644 | DURABLE DURABLE TOOLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-729 | TOOLSET TOOL SET, DURABLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-731 | TOOLSET TOOL SET, DURABLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-746 | TOOLSET TOOL SET, DURABLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-748 | TOOLSET TOOL SET, DURABLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-767 | TOOLSET TOOL SET, DURABLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-768 | TOOLSET TOOL SET, DURABLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-839 | FTIKIT FTI TOOL KIT - CBTS-419-82N (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-840 | FTIKIT FTI TOOL KIT - CNTS-419-A (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-841 | FTIKIT FTI TOOL KIT - CNTS-419-B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-875 | FTIKIT FTI TOOL KIT - CNTS-419-C (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-876 | FTI TOOL KIT -CNTS-419-D (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-877 | FTIKIT FTI TOOL KIT - CNTS-419-E (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8004-878 | FTIKIT FTI TOOL KIT - FTI-419-1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8005-173 | FTIDRBL FTI DURABLE TOOLING - NOMINAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8005-175 | FTIDRBL FTI DURABLE TOOLING - OVERSIZE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8005-349 | FTIKIT FTI TOOL KIT - DTS-419-1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8005-441 | FTIKIT FTI KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8005-443 | FTIKIT FTI KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8005-445 | FTIKIT FTI KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8005-670 | FTIKIT FTI KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8005-671 | FTIKIT FTI KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8005-672 | FTIKIT FTI KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8006-175 | TOOLKIT TOOL KIT, FTI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8006-176 | FTITLKT FTI TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8006-177 | TOOLKIT TOOL KIT, FTI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8006-178 | TOOLKIT TOOL KIT, FTI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8006-179 | TOOLKIT TOOL KIT, FTI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8006-577 | FTITLKT FTI TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 80080-1 | PMAT XS (CALIBRATION) | 1 | |
| (CALIB) 801 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8012A | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8020B | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8022B | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8025 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 80350A | Standard Peak Power Sensor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 803B | ETS ESD COMPLIANT RESISTANCE PROBE (CALIBRATION) | 1 | |
| (CALIB) 805-10045- | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 80507081 | CADMIUM LHE® 5070 TOUCH-UP KIT, (CALIBRATION) | 1 | |
| (CALIB) 8050A | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8069 | ADJUSTABLE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 8070 | ADJUSTABLE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 8072 | ADJUSTABLE WRENCH (CALIBRATION) | 1 | |
| (CALIB) 809B | ETS SURFACE RESISTANCE CALIBRATION FIXTURE (CALIBRATION) | 1 | |
| (CALIB) 80K 40 | High Voltage Probe (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 80N-1A | Radio Altimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 80TK | Thermocoupler Module (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8110A | Pulse Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 81154-30 | DATA LOADER (CALIBRATION) | 1 | |
| (CALIB) 8116A | Pulse Function Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 812/1 | BITSHOLDER SMALL (CALIBRATION) | 1 | |
| (CALIB) 812A | GAUGE GAUGE, DIAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8200A | Digital Voltmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8225 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 83 III | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8300 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 833563-6 | TEST SET MANIFOLD (CALIBRATION) | 1 | |
| (CALIB) 834729-1 | Torque Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 835000 | Delay Line (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8350B | OSCILLATOR SWEEP HP (CALIBRATION) | 1 | |
| (CALIB) 83591 | DREVEL (CALIBRATION) | 1 | |
| (CALIB) 83752B | Synthesized Sweeper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 838 | BITS SOCKET (CALIBRATION) | 1 | |
| (CALIB) 8400-0,8400K | OPTICAL MICROMETER (CALIBRATION) | 1 | |
| (CALIB) 8400K | DIGITAL OPTICAL MICROMETER (CALIBRATION) | 1 | |
| (CALIB) 844/1-63KN | LOAD CELL (CALIBRATION) | 1 | |
| (CALIB) 8481B | Power Sensor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8482B | Power Sensor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8498A | Attenuator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 85 | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 85 III | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8500 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8500C PLUS | BALANCER ANALIZER CHADWICK- HELMUT (CALIBRATION) | 1 | |
| (CALIB) 8501 | Microwave Peak Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8502 | RF Peak Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 85024A | High Frequency Probe (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 85046A | S-Parameter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 85047A | S-Parameter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8505A | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 851-30486-508 | ELEC SCREWDRIVER - TORQUE, DYNAMOMET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8522A | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8525 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 853A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8541C | Single Input Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8552A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8552B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8553B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8554B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8555A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8556A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8558A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8558B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8559A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8560A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8560E | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8560EC | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8561A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8561B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8561E | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8562A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8562B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8562E | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8562EC | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8565A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 85660B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 85662A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8566B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 856A1084G02 | VSV TEST RIG (CALIBRATION) | 2 | |
| (CALIB) 856A1084G04 | Actuator (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 856A1278G03 | PLA ADJUSTMENT KIT (CALIBRATION) | 1 | |
| (CALIB) 856A1357G05 | TESTER SENSOR CIT (CALIBRATION) | 3 | |
| (CALIB) 856A1416G03 | FIXTURE BIULDUP (CALIBRATION) | 1 | |
| (CALIB) 856A1717P01 | TOOL KIT, PRESERVATION (CALIBRATION) | 1 | |
| (CALIB) 856A1833G01 | FIXTURE INSTALL (CALIBRATION) | 1 | |
| (CALIB) 856A2645G02 | Engine exchange equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 856A2659G01 | FILTER ADAPTER - DRY OUT (CALIBRATION) | 1 | |
| (CALIB) 856A2675G01 | Tool Set, Leak Test - AGB/Equip (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 856A2718G05 | TOOL SET,R I-DRIVE SHAFTS (CALIBRATION) | 1 | |
| (CALIB) 856A2745G02 | TOOLSET TOOL SET-THICKNESS GAGE PHONIC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 856A2946 | RING-PROTECTIVE FAN DISK (CALIBRATION) | 1 | |
| (CALIB) 856A3500G01 | EXTRACTOR/ESPACIADOR ALABES FAN CFM (CALIBRATION) | 1 | |
| (CALIB) 856A3782G02 | WRENCH (CALIBRATION) | 1 | |
| (CALIB) 856A3793 | FIXTURE,PUSHER PULLER-CVT (CALIBRATION) | 1 | |
| (CALIB) 856A5817G01 | Test tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8590A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8590B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8590D | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8590L | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8591A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8591E | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8591EM | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8593A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8594E | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8595E | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8596E | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 860135085100001 | SIMULATR INERTIAL NAVIGATION UNIT SIMULA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 860135952100001 | SIMULATR SIMULATOR REFUEL VALVES SOLENOI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 860135953100000 | TESTSET TEST SET, LANDING GEAR RELAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 860135953100001 | TESTSET TEST SET - LANDING GEAR SAFETY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 860135956100000 | TESTBOX UNIT - RAM AIR TURBINE GROUND C (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 860135958100002 | GENERATR GENERATOR, WHEEL DRIVING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 860135958100003 | WHEEL GENERATOR DRIVING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 860135970100000 | TESTSET TEST SET - APU FIRE EXTINGUISHI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 863 | Graphical Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8640B | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8640M | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8643A | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8656B | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 867 B | Graphical Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8672A | Synthesized Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8673E | Synthesized Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 87 Series | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 871 | ETS WIDE RANGE RESISTANCE METER (CALIBRATION) | 1 | |
| (CALIB) 8711A B C | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8712A B C ES ET | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8713A BC | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8714A B C ES ET | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8751A | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8752A B C D | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8753A B C D E ES ET | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8754A | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8757A B C D E | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 875B | LCR Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 878 | LCR Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 878A | METER - LCR (CALIBRATION) | 2 | |
| (CALIB) 879B | LCR Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 87V | RMS Multimeter (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 880 | LCR METER (CALIBRATION) | 2 | |
| (CALIB) 8800 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8808A | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8810 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8810S3204 | Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8816694000 | VIBRATION MEASUREMENT (CALIBRATION) | 1 | |
| (CALIB) 8845A | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8846A | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 89-250 | ADJUSTABLE PLIERS (CALIBRATION) | 1 | |
| (CALIB) 8901B | Modulation Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8902A | Measuring Receiver (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8903B | Audio/Distortion Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8903E | Audio/Distortion Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8904A | Multi-function Synthesizer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8919 | 45ton "fly away" Axle Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8920A | RMS Digital Voltmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8920B | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 8973A | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9 | Comm. Service Monitor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 90000062 | MULTI FUNCTION TEST SET (CALIBRATION) | 1 | |
| (CALIB) 901-14721 | TORQUE METER RUN-OUT TEST (CALIBRATION) | 1 | |
| (CALIB) 901-14990 | BALANCER/ANALYZER W/ STANDARD ACCESSORIE (CALIBRATION) | 1 | |
| (CALIB) 90254A320 | HELICAL EXTRACTION TOOLS FOR INSERTS (CALIBRATION) | 1 | |
| (CALIB) 90325-1 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) 9034 | TROLLEY TROLLEY-MAIN GEAR HANDLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9045001 | T-LIGHT COMPARATOR (CALIBRATION) | 1 | |
| (CALIB) 9045007 | T-LIGHT COMPARATOR (CALIBRATION) | 1 | |
| (CALIB) 906-10246-1 | KIT-LRT (CALIBRATION) | 1 | |
| (CALIB) 906-10246-3 | TESTER - LOOP RESISTANCE ( LRT "-1" FOR CHECKS UP TO & INCLUDING 4 YEARS ONLY, LRT "-2 & -3" APPLICABLE FOR ALL HIRF/FQIS CHECK/ INSPECTION INTERVALS) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 906-10246-3/9 | LOOP RESISTANCE TESTER KIT C/W LRT 906-10247-3 & (CALIBRATION) | 1 | |
| (CALIB) 906-10246-3/906-10247-3 | KIT-LOOP RESISTANCE TESTER (CALIBRATION) | 1 | |
| (CALIB) 906-10247-3 | TESTER LOOP RESISTANT (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 906-17460 | CASE,ELECTRICAL-ELECTRONIC TEST (CALIBRATION) | 1 | |
| (CALIB) 9092-016 | WHEEL AND BRAKE DOLLY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 91-498 | HOIST HOIST-R I,APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 91-502 | BEAM BEAM-LIFTING, APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 91-509 | CRADLE CRADLE-STAND BASE,APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 91-535 | APU LIFT BEAM, A330 / A340 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 91-536 | HOIST HOIST-MINILIFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 91-541 | HOIST HOIST-MINILIFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 91-639 | BRIDGE - APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 91-640 | HOIST KIT - APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 91/640 | Hoist Kit, A350 APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 91/84 | Winding handle assy. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9100-4024 | TRANSFORMER POWER (CALIBRATION) | 1 | |
| (CALIB) 915-16897-1 | VIBREX KIT 2000 (CALIBRATION) | 1 | |
| (CALIB) 915-18205 | BALANCER AND VIBRATION ANALYZER (CALIBRATION) | 1 | |
| (CALIB) 915-18632 | HONEYWELL CHADWICK BALANCER / ANALYZER (CALIBRATION) | 1 | |
| (CALIB) 915-26514 | CHADWICK HELMUTH VIBREX 2000 (CALIBRATION) | 2 | |
| (CALIB) 91601-1 | CRIMP TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 919PH | SCREWDRIVER 90 DGR .OFFSET PHILLIPS (CALIBRATION) | 1 | |
| (CALIB) 9200A | RF Voltmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9240SI | CONTRLLR CONTROLLER-LOOP (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 9300A860 | CVR Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 93038510 | THERMOMT THERMOMETER, DIGITAL - SERIES 5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 93038660 | PROBE PROBE OF AIR - 80PK-24, FLUKE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9314CM | Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9339A1 | CALIBRAT CALIBRATION STANDARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9429M24G03 | PROTRACTOR, ELECTRONIC PORTABLE - VARIABLE STATOR VANE (CALIBRATION) | 1 | |
| (CALIB) 9440-010 | SMALL AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9446M93P01 | Shop Dolly (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9481M68G02 | TOOL (CALIBRATION) | 1 | |
| (CALIB) 9486M88G01 | EXTRACTOR WITH SLIDE HAMMER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 95-92052-0003 | ANGULOMETRO (CALIBRATION) | 1 | |
| (CALIB) 95-92056-0003 | DC CAPACITANCE MEASUREMENT TEST SET (CALIBRATION) | 1 | |
| (CALIB) 95-92056-0005 | ZODIAC AEROSPACE CAPACITANCE MEASUREMENT TEST SET (CALIBRATION) | 1 | |
| (CALIB) 95-92056-003 | DC CAPACITANCE MEASUREMENT TEST SET. (CALIBRATION) | 1 | |
| (CALIB) 95-92082-0003 | POTENTIOMETER TEST BOX (CALIBRATION) | 1 | |
| (CALIB) 95-92082-0005 | POTENTIOMETER TEST BOX (CALIBRATION) | 1 | |
| (CALIB) 95-92118-0001 | TEST BOX, FLAP CONTROL (CALIBRATION) | 1 | |
| (CALIB) 95-92123-0001 | CLAMPING DEVICE (CALIBRATION) | 1 | |
| (CALIB) 950-318 | PROTRCTR DIGITAL PROTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9501501-4000 | TESTER VACUUM TOILET-LEAK TESTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 95031S | DIGITAL PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) 952001 | RF Voltmeter Probes (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9522A | SIMULATEUR MOTEUR TOURNANT A330 (CALIBRATION) | 1 | |
| (CALIB) 9535 | METER AIR VELOCITY (CALIBRATION) | 1 | |
| (CALIB) 954-2399 | STANDARD COMPASS FOR COMPASS SWING CALIBRATION (CALIBRATION) | 1 | |
| (CALIB) 954-2399REV | LANDING COMPASS (CALIBRATION) | 1 | |
| (CALIB) 956A1238G01 | Depth gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A1602P01 | KIT, PRESERVATION - LUBE AND FUEL SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A1602P01 | PRESERVATION KIT (CALIBRATION) | 1 | |
| (CALIB) 956A1608G01 | ADAPTER, R/I FUEL PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A6621G01 | Tool Set, Leak Test - AGB/Equip (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A7314G02 | SET, LIFTING BRACKET, TURBINE REAR FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A7314G05 | SET, LIFTING BRACKET, TURBINE REAR FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A7644G02 | SHIPPING STAND, SHIPPING-ENGINE ASSEMB (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A7644G03 | SHIPPING STAND, SHIPPING-ENGINE ASSEMB (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A7649G02 | JACK, REMOVE/INSTALL - BOTTOM LRU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A8667G03 | Lifting Bracket Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A8667G04 | Lifting Bracket Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9599-607-11512 | RAMP TEST EQPT (RAD ALT) (CALIBRATION) | 1 | |
| (CALIB) 9599-607-15902 | Test tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 964-0446-001 | DOWNLOAD UNIT HAND HELD (CALIBRATION) | 1 | |
| (CALIB) 97 | Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97094 | DREVEL (CALIBRATION) | 1 | |
| (CALIB) 97102A4241M000 | SLING SLING-HANDLING,THRUST REVERSER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9719-010 | Axle Jack, Hand carry type (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 971F 1 | Auto Pilot Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 972S 1 | Auto Pilot Ramp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 972S 2 | Auto Pilot Bench Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 972S 3 | Servo Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 975D 2 | DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 978F 2S | Synchro Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27003000000 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27003000002 | GAGEASSY GAGE ASSY- PUSH-PULL (LLOYD) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27003000004 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27003000005 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27003000006 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27003000007 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27302009000 | LOCKTOOL LOCKING TOOL - PITCH TRIM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A27902016000 | SPRINGSC SPRING SCALE ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A28002117002 | TOOL-PURGING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A28002217002 | TEST TOOL-APU AND ENGINE PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A28002217003 | TESTTOOL TEST TOOL-APU AND ENGINE PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A29102035000 | CONNECTR CONNECTOR-PRESSURIZING,HYDRAULI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A29102090000 | TOOLSET TOOL SET-REMOVAL BOBBINS AND IN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A32402018000 | GAGE PRESSURE GAGE-BRAKE BLOCK HYDRA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97A32602403100 | TIRE PRESSURE SIMULATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97D21503000000 | TESTTOOL TEST TOOL-TWO SPEED FANS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97D34103000000 | SENSOR AOA SENSOR TOOL (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 97F32001001000 | CONTROL CONTROL UNIT-LEG FREE FALL ACTU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97F52001000020 | CHECKTL CHECK TOOL-PROXIMITY SENSOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97F53008843000 | DRILLING DEVICE C73A / C75A (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97F57508704000 | RPRTOOL REPAIR-TOOL,FAIRING 3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97F57508704001 | RPRTOOL REPAIR-TOOL,FAIRING 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97F57508704003 | RPRTOOL REPAIR-TOOL,FAIRING 4RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97F92003500000 | METER METER, MILLIOHM - EXPLOSIVE ATM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97L28001013000 | FUEL TEST PRESS GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97L42002004000 | SET OF ADAPTER TOOLS FOR AFDX HARNESSES TEST SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97L57508828000 | TOOL DRILL TOOL-FLAP FAIRING DRIVE B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97L57508828001 | TOOL DRILL TOOL-FLAP FAIRING DRIVE T (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 97V34001003000 | AIR DATA ACCESSORY KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98-04-08138 | TEST DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 980 | Sight Compass (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 980N 1 | Altimeter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 983-9139-670 | UPPER AND LOWER LSP GSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A07003903001 | FITTING FITTING-LIFTING MOORING FR17 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A07003906200 | Adapter Load Cell (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A07003907200 | Adapter Load Cell (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A08001006000 | COLUMN COLUMN-GRADUATED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A08003003000 | ROD SIGHTING RODS-WING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A08003004000 | RODS RODS, SIGHTING - THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A08003005000 | RODS RODS - WING SIGHTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A10003005000 | MOORING KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A10003900000 | MOORING FITTING FR 12 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A10003900001 | MOORING FITTING FR 12 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A12001029100 | SYRINGE LUBRICATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A12001029200 | Syringe Lubrication (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A20003010000 | CRIMPING MACHINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A21001500000 | TOOL INSTALLATION POSITIONING TOOL-R (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A21001502000 | PROTECTIVE PLATE-HEAT EXCHANGER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A21003003000 | JACK JACK-R I EXCHANGER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A26203250001 | BLANKING PLUG SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A26203250022 | BLANKING BLANKING PLUG SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27104000001 | JIG JIG-NEUTRAL SETTING-LOW SPEED A (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27108022000 | JIG JIG-NEUTRAL SETTING,ALL SPEED A (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27108495000 | DEVICE NEUTRAL SET DEV ASA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27203250002 | MEASURNG MEASURING EQUIPMENT - RUDDER PE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27207507001 | EXTRACTR EXTRACTOR-RUDDER BEARINGS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27207561002 | FIXTURE RUDDER FIXTURE - VERTICAL STABI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27208423000 | Extractor Rudder Bearings (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27208514001 | FIXTURE FIXTURE, RUDDER - VERTICAL STAB (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27301002000 | ANGLE MEASURING EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27303502000 | EQUIPMT MEASURING EQUIPMENT T.H.S DEFLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27308007000 | GAUGE GAUGE-NEUTRAL SETTING, ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27308031000 | TEST TEST EQUIPMENT-DETENT UNITS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27308032000 | BENCH ADAPTER BENCH TEST DETENT UNITS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27309000000 | GAUGE GAUGE-ELEVATOR NEUTRAL SETTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27407512001 | DEVICE DEVICE-REMOVAL INSTALLATION,TRI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27407514003 | STRUT STRUT-FIXTURE,HORIZONTAL STABIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27407514004 | STRUT STRUT-FIXTURE,HORIZONTAL STABIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27407514005 | FIXTURE FIXTURE-STRUT,HORIZONTAL STABIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27407515000 | ACTUATOR TROLLEY-THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27407568000 | STRUT STRUT - DISTANCE, FRAME 91 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27407569000 | EXTRACTR BOLT - EXTRACTOR, HORIZONTAL ST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27408408001 | HOIST HOIST-THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27408408002 | HOIST HOIST-THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27408576002 | DEVICE DEVICE-R I,THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27408640000 | DEVICE DEVICE-REMOVAL INSTALLATION,THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27504024000 | EXTRACTR EXTRACTOR-SPIGOT-FLAP TRACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27504033000 | GAUGE SET-FLAT TAB NEUTRAL SETTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508005001 | HOISTING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508020000 | HOISTING SLING - OUTBOARD FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508027000 | TEMPLATE TEMPLATE-OUTBOARD FLAP,TRACKS 3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508030000 | TEMPLATE TEMPLATE-INBOARD FLAP,TRACK 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508053002 | WTBTEST WING TIP BRAKE (WTB) TEST TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508375000 | REMINST REM.-INST. TOOL - SPRING UNIT, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508494000 | CHECKING DEV.-VANE POSITION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508679000 | TOOL TOOL-R I,SPRING VANE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27508688000 | TEMPLATS TEMPLATES - OUTBOARD FLAP, TRAC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27603002000 | SAFETY COLLAR OTER SPEDBRAK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27608015000 | STTNG.GG.ST.ACT.ADJ. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27608017000 | TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27801000000 | EQUIPMT EQUIPMENT -REMOVAL INSTALLATIO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27803005000 | CHECK PIN (CALIBRATION) | 1 | |
| (CALIB) 98A27808003001 | DRIVE ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27808004000 | SLING HOISTING SLING - SLAT NO.1, 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27808005000 | DEVICE MEASURING DEVICE - SLAT TRAILIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27903501001 | MEASURNG MEASURING EQUIPMENT - PITCH AND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A28007570000 | ADAPTER ADAPTER - VENT AND DRAIN VALVE, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A2810 | PURGER - WATER DRAIN (CALIBRATION) | 1 | |
| (CALIB) 98A28104000000 | Water Drain Purger (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A28104000002 | Water Drain Purger (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A28104003001 | VACUUM RIG LEAK TESTING FUEL TANKS A300/A310 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A28104029000 | SPANNER SPANNER-OVERWING FILLER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A28104031001 | Water Drain Purger (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A29001001000 | UNIT UNIT FILLING-AIRCRAFT BRAKE SYS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A29001001001 | UNIT UNIT FILLING-AIRCRAFT BRAKE SYS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A29003000000 | HYDRAULIC CONNECTORS TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32101000000 | HANDLING TROLLEY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32101001000 | HOLD-OPEN DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32101502000 | HOIST HOISTING EQUIPMENT-MLG ACTUATIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32101506000 | R/I EQUIPMENT - MLG DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32101508000 | CLAMP CLAMP-HOISTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32103500001 | EQUIP - R/I MLG DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32103500005 | EQUIPMNT EQUIPMENT-R I MLG DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32104150000 | PIN-EXTRACTOR-MAIN GEAR PICKUP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32104150001 | EXTRACTR EXTRACTOR - PIN - MAIN GEAR PIC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32104158000 | EQUIPMENT HOISTING MAIN GEAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32104173000 | EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32203000000 | NOSE LANDING GEAR INST. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32203000002 | NOSE LANDING GEAR INST. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32203000010 | TROLLEY, NLG R/I EQUIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32203001000 | DRAG STRUT NOSE GEAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32203500000 | EQUIPMEN EQUIPMENT-HOISTING MAIN GEAR AC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A32503503000 | DRUM GRADUATED DRUM-NOSEWHEEL STEERI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A34103000000 | CONTROL CONTROL-TOOL FUSELAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A34203000000 | GYRO UNIT-ADJUSTMENT TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A35207599000 | HOSE ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A49009001001 | DEVICE – CLEANING APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A49009001002 | APU CLEANING DEVICE (pressure at 9 bar) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A49107504001 | PROTEC-MOUN BOLTS, APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A49207605001 | TROLLEY TROLLEY-TRANSPORT AND ASSEMBLY, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A49209002000 | TROLLEY ASSY. APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A49209002001 | TROLLEY ASSY. APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52008509000 | SLING SLING-UNIVERSAL,DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52108004000 | Sling - Passenger Door (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52108004001 | SLING - PASSENGER DOOR (S/NO. PRI/0378) (CALIBRATION) | 1 | |
| (CALIB) 98A52108007000 | TOOL SET - R/I PASSENGER/CREW DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52108007001 | TOOL SET - R/I PASSENGER/CREW DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52108008001 | SUPPORT SUPPORT FRAME-BALLAST WEIGHT,DO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52207535000 | SLING - EMERGENCY EXIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52207535001 | SLING - EMERGENCY EXIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52207614000 | BALLAST BALLAST WEIGHT - EMERGENCY EXIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52208001001 | TOOLS-RI,CARGO COMPARTMENT DOO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52208669000 | STRAP-EMERGENCY EXIT DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52208718000 | SLING SLING-EMERGENCY EXIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52307523000 | STRUT SUPPORT STRUTS - FWD AND AFT CA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52307529001 | SLING SLING - CARGO DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52307529002 | SLING SLING - CARGO DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52307587000 | DEVICE DEVICE - ADJUSTMENT, FWD CARGO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52307590000 | DEVICE SETTING DEVICE - SPRING UNIT, C (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52307628000 | LOCK LOCK-SAFETY,CARGO DOOR ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52308006000 | SLING SLING - UDC DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52308402000 | SUPPORT STRUT UDC- DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52308631000 | JIG JIG-FWD AFT CARGO COMPARTMENT D (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52308632000 | JIG DEVICE-ADJUSTMENT, CARGO COMPAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52308670000 | ACTUATOR SUPPORT STRAP - UDC DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A53003010000 | RULE MEASURING RULE-ONBOARD ROD CENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A53003012001 | INSPECTN INSPECTION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A53003500000 | REMOVAL REMOVAL TOOL OF PHILLIPS TORQUE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A53407566003 | EXTRACTR EXTRACTOR - ATTACH BOLTS, TAIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A53407566005 | EXTRACTR EXTRACTOR - ATTACH. BOLTS, TAIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A53601000000 | SLING R/I,RADOME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A53603004000 | HOISTING HOISTING-TOOL RACK 101 VU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A53603006000 | POSITIONING EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A53703511000 | NLG-BAY R/I TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003002000 | TROLLEY TROLLEY-PYLON REMOVAL INSTALLAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003002003 | TROLLEY-PYLON REMOVAL INSTALLAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003003000 | FRAME FRAME-STORAGE PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003004000 | GEAR HOISTING, PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003007000 | BEAM - HOISTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003013000 | GEAR HOIST PW PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003022000 | EXTRCTR EXTRACTORS-SLEEVE RIB12 RIB18 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003029002 | EXTRACTR EXTRACTOR SET-BUSH RIB 12 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003063000 | INSTALLN INSTALLATION TOOL - SHOULDERED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003083000 | REBORING REBORING,TOOL-WING AND PYLON FI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003083002 | REBORING REBORING TOOL-WING AND PYLON FI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003083003 | REBORING TOOL-WING AND PYLON FI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003084000 | INSTOOL INSERTING TOOL - SLEEVE, RIB12, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003094000 | TOOL CHAMFERING TOOL-WING AND PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003100000 | GEAR GEAR-HOISTING PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003101000 | TOOL-BEAM HOISTING ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003117000 | MOUNT PYLON STORAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003118000 | REAMING REAMING TOOL - AFT ATTACH FITTI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003503000 | TOOL TOOL,SB (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54403011000 | TOOL TOOL R I-SPIGOT BALL JOINT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54403022000 | EXTRACTR EXTRACTOR-SLEEVE, WING SPIGOT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54403022001 | EXTRACTR EXTRACTOR-SLEEVE, WING SPIGOT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54403023000 | EXTRACTR EXTRACTOR - SLEEVE PYLON-TO-WIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54403024000 | ADAPTOR ADAPTOR-DYNAMOMETRIC AT RIB1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54403024001 | ADAPTOR ADAPTOR-DYNAMOMETRIC AT RIB 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54403024002 | ADAPTOR ADAPTOR-DYNAMOMETRIC AT RIB 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54403024003 | ADAPTOR-DYNAMOMETRIC AT RIB 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54503004000 | TOOL TOOL REBORING PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54603005000 | TORQUE TORQUE,TOOL-RIB18, SPHERICAL BE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54603010000 | TRANSFER TRANSFER TOOL-SPIGOT FITTING HO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55109001002 | SLING HTP-R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55208012000 | SLING SLING - INSTALL REMOVE ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55208320001 | SLING ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55208320002 | SLING ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55303000000 | HOIST ASSY - FIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55303000001 | BEAM BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55307502000 | SLING SLING - VERTICAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55307577000 | SLING - LEADING EDGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55307577001 | SLING SLING-LEADING EDGE LOWER, VERTI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55307578000 | Sling - Vertical Stabilizer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55307578001 | Sling - Vertical Stabilizer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55307580000 | Sling- Fin, Dorsal (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55307580001 | Sling- Fin, Dorsal (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55307591001 | SLING - VERTICAL STABILIZER TIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55308403000 | MILLING MILLING AND CRIMPING DEVICE-RUD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55308440000 | SLING SLING-UNIVERSAL,TAIL PLANE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55308440001 | SLING SLING-UNIVERSAL,TAILPLANE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55308440002 | SLING SLING-UNIVERSAL,TAILPLANE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55308526000 | SUPPORT FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55308741000 | SLING SLING-R I,RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55308741001 | SLING SLING,R I RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55507589000 | BOLT BOLT-CENTERING,VERTICAL STABILI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57004010000 | Wing Cradle set (A300) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57004010040 | JACKING JACKING SET, RIB 6 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57004010041 | JACKSET JACKING SET, RIB 13 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57004010042 | JACKING JACKING SET, RIB 17 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57004010043 | JACKSET JACKING SET, RIB 24 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57004011000 | CRADLE CRADLE - WING SET, A310 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57004011040 | JACKING JACKING SET, RIB 15 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57004011041 | JACKING JACKING SET, RIB 21 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57004011042 | JACKING JACKING SET, RIB 29 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57103038000 | Repair Tool FR 47 Upper Part (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57103038002 | Repair Tool FR 47 Upper Part (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57103047000 | MILLING TOOL, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57104004000 | ADAPTOR ADAPTOR-TORQUE WRENCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57203003000 | TOOL RI RAT BRACKET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57208666000 | HOIST HOISTING DEVICE-FLAP TRACK 2-5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57304002000 | AUXILIARY TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57604005000 | SLING SLING-ALL SPEED AILERON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57804000000 | SLING SLING - SLAT NO 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57804001000 | SLING - SLAT NO 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57804002000 | SLING - SLAT NO 3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57904000000 | SLING - OUTER FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57904001000 | SLING CENTRE FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57904001001 | Sling - Centre Flap (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57904002000 | SLING SLING-INNER FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A57904005000 | TILTING TILTING MECHANISM-FLAP SLINGS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A71101007000 | COWL HOLD-OPEN FIXTURE - ENGINE COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A71101007001 | FIXTURE HOLD-OPEN FIXTURE-ENGINE COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A71101506001 | HOLD-OPEN FIXTURE-ENGINE COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A71103250000 | SLEEVE SLEEVE - COWL DOOR OPENING ACTU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A71103500000 | HOIST-PWA NOSE COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A71103501000 | HOISTING INSTALLATION GE &PWA FAN COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A71103502000 | SLING INSTAL. PWA THRUST REVERSER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A71103506001 | CHEST CHEST-TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A71103506002 | CHEST CHEST-TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A71103506003 | SET CHEST-TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98AMS172327002 | WRENCH WRENCH-ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07103000000 | DYNAMOMETER-SAFETY STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07103000001 | DYNAMOMETER-SAFETY STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07103002000 | NOSE JACKING SA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07104000001 | JACKING JACKING PAD SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07104081000 | JACKING JACKING PAD SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203000047 | MOORING MOORING FITTING, FRAME 33 (RH, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203000048 | MOORING MOORING FITTING, FRAME 62 63 (L (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203000049 | MOORING MOORING FITTING, FRAME 62 63 (R (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203000054 | MOD FITTING FR 21 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203002100 | FITTING FITTING FOR FR 42 (RH AND LH AR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203003040 | SHORING SHORING ASSY AT FR.9 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203003042 | SHORING SHORING ASSY BETWEEN FR.24 AND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203003044 | SHORING SHORING ASSY AT FR.60 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203004000 | CRADLE CRADLE SPECIAL JACKING WITH LOA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203004001 | CRADLE CRADLE SPECIAL JACKING WITH LOA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203005000 | CRADLE CRADLE SET-ENGINE LOAD SHEDDING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203005001 | CRADLE CRADLE SET-ENGINE LOAD SHEDDING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203013000 | SHORING SHORING FRAME 77 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203018000 | ENGINE CRADLE - PW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203020000 | EXTENSION FITTING FR8 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07209001000 | CRADLE THS SHORING CRADLE - SA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D08003000000 | SET SET-PLUMB BOBS MLG NLG WHEELS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D08103001000 | WHEELTO WHEEL TOE-IN LINE BAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D08103500000 | RODS SIGHTING RODS SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D10003000000 | COVER INLET COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D10003002000 | Cover Inlet Cowl (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D10203500000 | MOORING KIT-NLG (Ø38.1) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D10203500002 | MOORING KIT-NLG (Ø19) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D10203500004 | MOORING KIT-NLG (PANAM FITTING) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D24408392000 | GND PWR CONTRACTOR BOX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26203000004 | TESTTOOL TEST TOOL-ENG. FIRE EXTINGUISHI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26203001001 | TESTTOOL TEST TOOL-ENG FIRE EXTINGUISHIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26203001002 | TESTTOOL TEST TOOL-ENG FIRE EXTINGUISHIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26203002004 | TESTTOOL TEST TOOL - ENG. CFM56-5B, FIRE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26203002006 | TEST EQUIP CFM56-5A FIRE EXTING SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26203002008 | TEST TOOL ENGINE FIRE EX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26203002010 | TESTTOOL TEST TOOL-ENG FIRE EXTIGUISHING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26203005000 | EXTINGUISHING FIRE TEST CFM LEAP X (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26203006001 | EXTING. FIRE TEST PW 1100 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26203006002 | EXTING. FIRE TEST PW 1100 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D26208001000 | DEV- R-I, FIRE EXT BOTTLE A319ACJ (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27104001000 | FRAME FRAME-LIFTING ASSEMBLY,AILERON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27104005001 | COLLAR ASSY. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27104006000 | REAMER SPECIAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27203000001 | MEASURING EQUIPMENT-RUDDER PEDAL OPERATING LOAD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27203001000 | TOOL TOOL-RUDDER NEUTRAL ADJUSTMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27207508000 | GSE-FIXTURE VERTICAL STABILIZER/RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27207546000 | RIGGING PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27208657000 | DEVICE - FREEPLAY, RUDDER BEARING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27303000001 | PLAY MEASUR.FOR ORAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27303001001 | HOLDER SIDE STICK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27303003001 | CHCKTOOL CHECK TOOL (ANALOG)-AILERON,ELE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27303004000 | ARTFLROD ARTIFICIAL FEEL ROD TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27303019000 | CHECKING TOOL-CARDAN PLAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27303022000 | TOOL TOOL CHECK - DIGITAL, AILERON E (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27303022001 | TOOL TOOL CHECK - DIGITAL, AILERON E (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309001000 | NEUTRAL NEUTRAL SETTING TOOL - ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309003000 | ELEVATOR DEVICE - LOCKING, ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309006000 | GAUGE GAUGE-ELEVATOR NEUTRAL SETTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309008000 | SLING TO LIFT ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309009002 | COLLAR COLLAR DEPTH ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309009004 | COLLAR COLLAR DEPTH ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309010000 | Reaming tool, set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309011000 | ELEV-ACT DRILL TEMPL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27309012000 | HINGE FTING REAMER SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27403003000 | FIXTURE STRUT THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27403003001 | FIXTURE STRUT THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27403003002 | FIXTURE STRUT THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27403500000 | PITCH TRIM CONTROL LOCKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27407502000 | HOLDING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27407505000 | EXTRACTOR-CENTERING BUSH. THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27407517000 | TOOLSET TOOL SET-R I,THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27407533000 | FRAME FRAME - THS ACTUATOR SUPPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27407533001 | Frame, THS Actuator Support (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27408406000 | STRUT STRUT-DISTANCE FRAME 77 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27408624000 | DEVICE DEVICE-R I,THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504014000 | BOARD BOARD-FLAP RIGGING (TRACK 2) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504015000 | RIGGING BOARD-FLAP RIGGING (TRACK 3) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504016000 | RIGGING BOARD-FLAP RIGGING (TRACK 4) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504030001 | LOCK - TORQUE SHAFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504038000 | KIT KIT-FLAP RIGGING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504038001 | KIT KIT-FLAP RIGGING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504084000 | EXTRACTR EXTRACTOR - PIN, TRACK 4 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504113000 | KIT KIT-FLAP RIGGING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504113001 | KIT KIT - FLAP RIGGING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504114000 | SETTING GAUGE, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27504115000 | SETTING GAUGE, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27508655000 | RIG RIG-SCALE,FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27603000001 | CHECK SPOILER POSITION CHECK TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27603001000 | LD APPLICAT TOOL- SPLR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27604004000 | SECURING COLLAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27803000000 | LOCKING MECHANISM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27803500001 | LOCKING MECHANISM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27804009000 | SLING - SLATS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27804009001 | SLATS SLATS - SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27804021000 | GAUGE GAUGE-SLAT TRACK SETTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28004002000 | TEST TEST EQUIPMENT-APU FUEL FEED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28004005000 | VENT STRINGER LEAK TEST KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28004006000 | CENTRE AND OUTER TEST TANK KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28104000000 | PIPE PIPE ADAPTING-WATER DRAINING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108003000 | GUIDE RI ACT 320 NEO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108004000 | GUIDE R-I, ACT A321ACF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108293000 | ADAPTER WATERDRAIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108298000 | STORAGE-CONTAINER FUEL-ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108299000 | GUIDE GUIDE-R I,ADDITIONAL CENTER TAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108299002 | GUIDE GUIDE-R I,ADDITIONAL CENTER TAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108343000 | BRIDGE-R/I, ACT 1-6 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108345000 | SLEDGE SLEDGE-RI,ACT 5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108347000 | RAIL RAILS-R I,ACT 5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108366001 | GUIDE GUIDE-R I,AIRCRAFT CENTER TANK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108417000 | TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108560000 | ADAPTER - TUBE, WATER DRAIN (CALIBRATION) | 1 | |
| (CALIB) 98D28108562000 | ADAPTER ADAPTER, PRESSURE DRAIN - ACT (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 98D28108641000 | DEVICE DEVICE-ADJUSTEMENT,ACT LATCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108647000 | DEVICE DEVICE-CHECK,VAPOR SEAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D28108658000 | ACTPRSS TOOL-PRESSURE TEST,ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D29003501000 | FILLUNIT FILL UNIT-AIR PRESSURIZING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D29003501003 | FILLUNIT FILL UNIT - AIR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D29003502000 | FILLTOOL FILLING TOOL-BRAKING SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D29003502001 | FILLTOOL FILLING TOOL-BRAKING SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D29003502002 | FILLTOOL FILLING TOOL-BRAKING SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D29208246001 | DEVICE DEVICE-SAFETY,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D29208581000 | EQUIPMNT PROTECTION EQUIPMENT - RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104002000 | EQUIPT EQUIPMENT-MLG REMOVAL INSTALLAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104002001 | EQUIPMT EQUIPMENT-MLG REMOVAL INSTALLAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104002002 | EQUIPMT EQUIPMENT MLG, REMOVAL INSTALLA (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 98D32104002003 | EQUIPMNT EQUIPMENT-MLG, REMOVAL INSTALLA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104009001 | REMINST REM., INST. EQUIPMENT - MLG ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104009002 | REMINST REM., INST. EQUIPMENT - MLG ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104009003 | REMINST REM., INST. EQUIPMENT - MLG ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104009007 | EQUIPMT EQUIPMENT-R I OF THE MLG ACTUAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104010000 | BRACKET INTERFACE BRACKET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104010001 | BRACKET INTERFACE BRACKET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104013001 | SPLNTASS SPLINT ASSEMBLY - SIDE STAY (A) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104013002 | SPLINT ASSY - SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104013004 | SPLNTASS SPLINT ASSEMBLY - SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104080000 | SOCKET WRENCH ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32104190001 | TOOL TOOL - R I (MLG FWD AND REAR PI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32203002000 | NLG ACTUAL FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32203500000 | TOOL TOOL-R I NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32203504000 | TROLLEY TROLLEY-NLG GROUND HANDLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32203504001 | TROLLEY TROLLEY-NLG GROUND HANDLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32303000000 | SOCKET WRENCH, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D32403005000 | SOCKET WRENCH ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34003500000 | BLANKING PLATE, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34103000000 | ALIGNMNT ALIGNMENT,TOOL-IRU PLATFORM BRA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34103001000 | CONTROL CONTROL TOOL-STATPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34103002000 | ADAPTERS ADAPTERS - AIR DATA SYSTEM FLUS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34103002100 | ADAPTERS AIR DATA SY (CALIBRATION) | 1 | |
| (CALIB) 98D34103002102 | AIR DATA SYSTEM FLUSHING 2-PIN ADAPTER (CALIBRATION) | 1 | |
| (CALIB) 98D34103003000 | PITOT PNEUMAT CLEANER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34103004001 | CLEANER-PITOT PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34103007000 | AOA PROBE TESTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D34203000000 | ALIGNMENT TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D35208729000 | TOOL-DPRSS,TEST-O2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D35208729001 | TOOL-DPRSS,TEST-O2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D36003000004 | TESTSET TEST SET - ENGINE BLEED SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D36103000000 | PRESSURE LOSS TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D36109001000 | TEST SET EBAS BLEED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47009001000 | TESTER PRESSURE TESTER, FTIS RETROFIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47009001002 | TESTER PRESSURE TESTER, FTIS RETROFIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47009001003 | TESTER PRESSURE TESTER, FTIS RETROFIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47103500000 | HOLDING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D47209001000 | VACUUM & PRESSURE TEST KIT, IGGS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D49107554000 | SAFEBELT SAFETY BELT - APU HOIST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D49207527000 | SUPPORT SUPPORT FRAME FOR APU WITH TROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D49207527001 | SUPPORT SUPPORT FRAME FOR APU WITHOUT TROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D49207537001 | CABLE CABLE-SAFETY, APU GENERATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D49209001000 | APU SUPPORT FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D49209001001 | APU SUPPORT FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52003001000 | UNIT CONTROL UNIT,O C-AIRSTAIRS DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52003003000 | BARRIER BARRIER,SAFETY-PAX DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52003003001 | BARRIER BARRIER,SAFETY-PAX DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52003003002 | BARRIER,SAFETY-PAX DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52003004001 | SAFETY BARRIER, EMERGENCY EXIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52003006000 | HOLDING HOLDIND-REPLACE FITTING HINGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52103003000 | ADJUSTING CYLINDER LENGTH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52103501000 | BALLAST BALLAST WEIGHT - PASSENGER CREW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52103502000 | TOOL REMOVAL INSTALLATION TOOL-AIRST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52109001000 | FITTING REPLACEMENT TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52208001000 | SLING-CLOSURE, OWE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52307515000 | SAFETY LOCK-ACTUATOR, CARGO DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52307523000 | EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52307523001 | EXTRACT EXTRACTOR-HINGE PINS,CARGO DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52307524000 | SUPPORT STRUT CARGO DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52307525000 | TOOL TOOL-ADJUSTMENT,CARGO DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D52308002000 | CURVED SHIM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103005000 | REMINST REMOVAL INSTALLATION TOOL - LOW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103006000 | HANDLING HANDLING TOOL-LOWER SHELL (MXA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103007000 | POSITION POSITIONER TOOL-LOWER SHELL (MX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103008000 | FR20-ROD Drilling Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103010000 | REMINST REMOVAL, INSTALLATION TOOL - RE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103011000 | SBTOOL SB TOOLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103014000 | TEMPLATE TEMPLATE,CUTTING-ANTENNA C.14-1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103019000 | R/I NLG BEARING BUSH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103020000 | TOOL NLG REAMER TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103021000 | FR 16 CROSS BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103022000 | SATCOM IRIDIUM ANTENNA DRILLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103500000 | SLING SLING-RADOME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53103504002 | GUIDE TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53113001000 | SUPPORT TABLET INSTALL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53203000000 | TUBE SPACER TUBE NLG BEARING FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53203001000 | TOOL STATIC PART REWORK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53203004001 | INSTALL INSTALLATION-SATCOM ANTENNA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53303002000 | FUEL. DOOR MACHIN. TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53308001000 | REAMING TOOL, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D53409001000 | WINDW DRILL TEMPL-S18 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54003000000 | TROLLEY TROLLEY-PYLON R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54003000001 | TROLLEY TROLLEY PYLON R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54003001000 | STORAGE STORAGE RIG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54003002000 | GEAR GEAR-HOISTING PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54003003000 | BEAM BEAM-LIFTING AT RIB 4 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54003003001 | BEAM BEAM-LIFTING AT RIB4 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54003005000 | EXTRACT PYLON SHAFT EXTRACTOR RIB4-RIB1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54003015000 | R/I RING AT RIB 4/5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54403002000 | REMINST REM INST TOOL - SPIGOT BALL JOI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54403003000 | APF TOOL REPAIR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54403004000 | CFM & PW 23 R/I APF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54403006000 | R/I PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54403007000 | SHOCK STRUT GAG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54403009000 | ADAPTOR PYLON DYNAMOMETER CELL PW/ CFM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D54503000000 | WRENCH PYLON REMOVAL-WRENCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D55109001000 | TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D55109005000 | SLING SLING-HORIZONTAL STABILIZER, RE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D55109005001 | SLING SLING-HORIZONTAL STABILIZER, RE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D55209004000 | SLING SLING, REM.-INST.- ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D55307503001 | CENTERING BOLT SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D55307518000 | SLING SLING - R-I VERTICAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D55307531000 | SLING - DORSAL EDGES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D55307531001 | SLING SLING - DORSAL FIN, LEADING EDG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D55308676000 | EXTRACTOR-BOLT,VTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D56003001000 | WINDSHIELD INSPECTION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D56003001001 | HARNESS LR AND WB (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D56003001002 | WINDOW INSPECTION TOOL (CALIBRATION) | 1 | |
| (CALIB) 98D56103001000 | R/I FRONT WINDOW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D56103004000 | CE – YOKE SQUEEZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D56103005000 | PISTOL FITTING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004003001 | SOCKET, FWD PINTLE BEARING (CALIBRATION) | 1 | |
| (CALIB) 98D57004011000 | TEMPLATE- TRACK CAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004013000 | HOOK-COVER (RIB 2 SURGE DOORS) (CALIBRATION) | 1 | |
| (CALIB) 98D57004014000 | HOOK-COVER (RIB2-SURGE DOORS) (CALIBRATION) | 1 | |
| (CALIB) 98D57004018000 | BUSH EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004022000 | SAFETY ROPE-WING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004023002 | KIT R I KIT S STAY BUSHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004023003 | TOOLKIT TOOL KIT-REM.-INST., STAY BUSHE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004025000 | KIT KIT, REM.-INST. - PINTLE BUSHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004025001 | KIT KIT, REM.-INST. - PINTLE BUSHE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004025002 | R I KIT PINTLE BUSHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004025003 | R/I KIT PINTLE BUSHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004028000 | EXTRACT EXTRACT0R - PYLON SLEEVE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004031040 | JACKING JACKING SET, RIB 4 - L.H (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004031041 | JACKING JACKING SET, RIB.13 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004031042 | JACKING JACKING SET, RIB 22 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004031043 | JACKING JACKING SET, RIB.4 - RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004038000 | FIXTURE FIXTURE BORING-CARDEN FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004040000 | TOOL FACING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004043000 | TOOL TOOL-SPOT FACE, CARDAN FITTTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004053000 | AIRBUS RETRACT ACT. BORING A320 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004081000 | SPANNER - R I BEARING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004089000 | SHARKLET RETROFIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004089001 | SHARKLET RETROFIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004098040 | JACKING SET - RIB 4 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004098041 | JACKING SET - RIB 4 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004098042 | JACKING SET - RIB 13 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57004098044 | JACKING SET - RIB 22 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57304001000 | GRID TORQUE NUT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57304001001 | Grid Nut Torque (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57304002000 | HOIST SHARKLET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57304004000 | EXTRACTOR LOWER PINS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D57304005000 | FLAP HNGE BORING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203001001 | CHEST CHEST-TORQUE SET OF IAE V2500 E (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203001002 | CHEST-TORQUE SET OF IAE V2500 E (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203002001 | CHEST CHEST,TORQUE SET-ENGINE R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203002002 | SET CHEST TORQUE SET - CFM56-5 ENGI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203003000 | HOLDING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203005000 | RODS-FWD ENG MOUNT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203006000 | CHEST CHEST-TORQUE SET PW6000 ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203008000 | BOOTSTRP BOOTSTRAP SYSTEM PW6000 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203010000 | BOOTSTRAP SYSTEM CFM (Dimensional Test) (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 98D71203010000_RtSt | BOOTSTRAP SYSTEM CFM (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203011000 | BOOTSTRAP SYSTEM PW (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203011000_RtSt | BOOTSTRAP SYSTEM PW (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203011001 | BOOTSTRAP SYSTEM PW (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203011001_RtSt | BOOTSTRAP SYSTEM PW (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203013000 | TORQUE WRENCH SET PW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203014000 | TORQUE WRENCH SET CFM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203015000 | IDG R/I CRADLE (CFM) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203016000 | IDG R/I CRADLE PW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203017000 | R/I THRUST LINK – PW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203018000 | R/I THRUST LINK-CFM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203022000 | ADAPTER TROLLEY R/I IDG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203025000 | Electrical Hoist Kit A320 NEO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203026000 | A320 INFLATABLE SHELTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203029000 | R/I ENGINE MOUNT BEARING A320 NEO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203501001 | BOOTSTRAP SYSTEM A320 (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203501001_RtSt | BOOTSTRAP SYSTEM A320 (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203501002 | BOOTSTRAP SYSTEM A320 (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203501002_RtSt | BOOTSTRAP SYSTEM A320 (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203501003 | BOOTSTRAP SYSTEM A320 (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D71203501003_RtSt | BOOTSTRAP SYSTEM A320 (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D76103000000 | LEVER THROTTLE LEVER LOAD MEASURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D76103000002 | MEASURE MEASURE,LOAD-THROTTLE LEVER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D7830H027-000 | PUMP HAND PUMP-THRUST REVERSER ACTUA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98DNSA20208080 | LOCKING BOLT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98DNSA20208120 | LOCKING BOLT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07103000000 | SAFETY WARNING KIT TAIL JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07103500001 | JACK PAD NOSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07104000001 | JACKING PAD SET - WING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07104000002 | JACK ADAPTER, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000100 | FITTING FITTING-FR.7, LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000101 | FITTING FITTING-FR.7, RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000102 | FITTING FITTING-FR.26, 32, 36 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000111 | FITTING FITTING-FR.59 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000120 | FITTING FITTING-SHORING AT LH, FR.17 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000121 | FITTING FITTING-SHORING AT RH, FR.17 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000122 | FITTING FITTING-SHORING AT LH, FR.39 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000123 | FITTING FITTING-SHORING AT RH, FR.39 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000124 | FITTING FITTING-SHORING AT LH, FR.53 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000125 | FITTING FITTING-SHORING AT RH, FR.53 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000126 | FITTING FITTING-SHORING AT LH, FR.76 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000127 | FITTING FITTING-SHORING AT RH, FR.76 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000140 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000141 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000142 | FITTING FITTING - SHORING AT FR.76, LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000143 | FITTING FITTING - SHORING AT FR.76, RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000146 | FITTING FITTING - FR57 1-2 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000147 | FITTING FITTING - FR57 1-2 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000148 | FITTING FITTING - FR.53-8 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000149 | FITTING FITTING - FR.53-8 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203000150 | FITTING FITTING - FR.17 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203001040 | Fuselage Support (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203001042 | Fuselage Support (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203001044 | Fuselage Support (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203001046 | Fuselage Support (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203001050 | CRADLE - FUSELAGE, FR.80 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203002000 | JACK JACK-AUXILIARY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203002001 | JACK JACK-AUXILIARY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203002002 | BASE BASE-SHORING JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203002003 | A380 SHORING KIT EXTENSION ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203002004 | JACK JACK-AUXILIARY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203002005 | JACK JACK-AUXILIARY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203002008 | A330/A340 SHORING KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203002009 | BASE BASE-SHORING JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203008000 | LOAD SHEDDING-CFM56 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021040 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021041 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021042 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021043 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021044 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021045 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021046 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021047 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021048 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021049 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021050 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021051 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021052 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021053 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021054 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021055 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021056 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021057 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021058 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021059 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021060 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021061 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021062 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021063 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021064 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021065 | FITTING FITTING - SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07203021066 | SHORING FITTING FR20 / 29 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F07209001000 | EXTRACTOR BOLTS VERTICAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F09101002000 | CABLE CABLE,TOWING-MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F09101003000 | BAR - STEERING WHEEL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F10103001000 | PLUG-ANTI ICE OUTLET AIR INTAKE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F10103500000 | BRAKE SHOE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F10201000000 | MOORING KIT-NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F10201000002 | MOORING KIT-NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F12303000000 | CONNECTR CONNECTORS-HYDRAULIC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F12303001000 | CONNECTR CONNECTOR HYDRAULIC HOSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F20008247000 | RE-/GREASING QUANTITY LIMITER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F21001004001 | EQUIPMT EQUIPMENT,R I-PACK EXCHANGER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F21003001000 | R/I MECH AIR COND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F21003002000 | BEAM OF HDLG AIRCOND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F21503000000 | AIR AIR CYCLE MACHINE TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F21503001000 | CRADLE CRADLE R I-PACK EXCHANGER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F21503001001 | LIFT LIFT,R I-PACK EXCHANGER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F21503002000 | HANDLING - PACK EXCHANGER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F24208245000 | HOIST HOIST-APU GENERATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F24208245003 | HOIST HOIST-APU GENERATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F24208245004 | HOIST-APU GENERATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F24208245005 | HOIST, APU-GENERATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F24303000000 | TOOL R I BATTERY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F25308416000 | REMOVAL / INSTALLATION DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F25308659000 | STRUT STRUT-ADJUSTMENT,REMOTE CHILLER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26203000000 | TESTTOOL TEST TOOL - ENG. FIRE EXTINGUIS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26203000002 | TESTTOOL TEST TOOL-ENG. FIRE EXTINGUISHI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26203000006 | TESTTOOL TEST TOOL-ENG. FIRE EXTINGUISHI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26203000008 | TOOLING TOOLING TEST - ENGINE FIRE EXTI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26203000010 | TOOLING TOOLING TEST - ENGINE FIRE EXTI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26203003000 | TESTTOOL TEST TOOL - ENGINE FIRE EXTINGU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26203007000 | EXTING FIRE LEAK TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26203007001 | EXTING FIRE LEAK TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26203500000 | ASSEMBLY STAND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26203503000 | DISCHARG DISCHARGE HEAD-INSTL FIRE EXTIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26208551000 | TROLLEY TROLLEY-FIRE EXTINGUISHER BOTTL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F26208586000 | DEVICE DEVICE-R I,FIRE EXTINGUISHER BO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27108231000 | GAGE SET AILERON SETTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27108367000 | DEVICE - REMOVAL INSTALLATION, AILERON ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27108864000 | WRENCH SET R/I AILERON ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27201002000 | PIN SAFETY PIN-RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27203000000 | TOOL TOOL-RUDDER NEUTRAL ADJUSTMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27203002000 | GAUGE- RUDDER NEUTRAL SETTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27303000000 | ELEVATOR CHECK ELEVATOR-FREE PLAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27309004000 | CENTERING BOLT, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27309006000 | GAUGE GAUGE- ELEVATOR NEUTRAL SETTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27309007000 | SETTING SETTING - ELEVATOR, NEUTRAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27309011000 | LIFTING LIFTING DEVICE - ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27403001000 | FIXTURE STRUT THSA WBI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27407502001 | STRUT DISTANCE-STRUT,FRAME 91 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27407502002 | STRUT DISTANCE-STRUT,FRAME 91 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27407503000 | EXTRACTR EXTRACTOR - BOLT, THS BEARING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27407504000 | TOOLSET TOOL SET-REM.INST.THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27407507001 | RAIL SET - R/I THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27407513000 | FRAME - SUPPORT, THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27408370000 | STRUT STRUT - SUPPORT, HORIZONTAL STA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27408394000 | FRAME FRAME-SUPPORT,THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27408409000 | RAILSET SET - REMOVAL INSTALLATION, THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27408409001 | RAILSET SET-REMOVAL INSTALLATION,THS AC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27408470000 | DEVICE DEVICE-REMOVAL INSTALLATION,THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27501002005 | FLAPPCU FLAP PCU-R I TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27503000000 | FLAPPCU FLAP PCU-R I TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508206000 | GAGE END STOP -FLAP ROTARY ACTUATORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508211005 | OPTICAL SET-OPTICAL ALIGNMENT,FLAPS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508211006 | OPTICAL SET-OPTICAL ALIGNMENT,FLAPS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508230001 | GAGE - FLAP LE STEP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508237001 | SUPPORT SUPPORT STRUT-FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508278001 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508278002 | ADAPTER ADAPTER SET - OPTICAL ALIGNMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508301000 | REGULATO REGULATOR - RELIEVING UNIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508302000 | GAGE-TAPE EXTERNAL FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508390000 | TOOL TOOL - ADJUSTMENT, INBOARD FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508398000 | SUPPLM SET-OPTICAL ALIGMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27508498000 | HOIST HOIST-R I,FLAP SLAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27608701000 | DISTANCE LR-DIST COLLAR SPOILER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27801000002 | SLATPCU SLAT PCU-R I TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27803000000 | SLATPCUL SLAT PCU-R I TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27803500000 | SLAT PCU-RI TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27803500001 | SLAT PCU-RI TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F28109001000 | PROTECTR PROTECTOR - STABILIZER, MANHOLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F28109017000 | FUEL OVER FLOW, HTTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F28109017001 | FUEL OVER FLOW, HTTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F28109018000 | TK PRESS GAUGE - HTTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F28203000000 | FUEL PIPE POSITION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29003000000 | WRENCHES WRENCHES-STANDARD TORQUE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29103001000 | TESTSET TEST SET-HYDRAULIC FLUID LEVEL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29103001001 | TESTSET TEST SET-HYDRAULIC FLUID LEVEL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29103002000 | TOOL-HYDRAULIC FLUID CHANGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29103003000 | SIMULATR SIMULATOR-ENGINE OPERATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29103004000 | SIMULATR SIMULATOR-ENGINE OPERATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29103005001 | REDUCING COUPLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29103500000 | FILLUNIT FILL UNIT-NITROGEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29203002000 | DRAINING DRAINING TOOL - HYDRAULIC RESER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29208258000 | DEVICE DEVICE-R I,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29208412000 | DEVICE DEVICE-R I,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29208457000 | PIN PIN-SAFETY,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29208472000 | REMOVAL INSTALLATION DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F29208544000 | HOSESPPT HOSE SUPPORT - GMT, RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F30403000000 | RAIN REPELLENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F30403001000 | TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32001006000 | GEARFILL GEAR FILLING KIT S-ABSOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32101000000 | TOOL TOOL R I-MLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32101000002 | TOOL TOOL R I-MLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104000000 | REMINST REM.-INST. TOOL, PINTLE PINS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104000001 | TOOL REM.-INST. TOOL, PINTLE PINS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104003000 | HDLGTRLL HANDLING TROLLEY, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104005001 | HOIST-EQUIPMENT, SIDE STAY, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104005002 | HOIST HOIST-EQUIPMENT,SIDE STAY, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104005004 | HOIST HOIST-EQUIPMENT,SIDE STAY, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104007000 | SPANNER, PINTLE NUT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104008000 | HOIST HOIST EQUIPMENT ACTUATOR, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104008001 | HOIST HOIST EQUIPMENT - ACTUATOR, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104009000 | HOISTEQP HOIST EQUIPMENT, PINTLE PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104009001 | HOISTEQP HOIST EQUIPMENT - PINTLE PIN (W (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104011000 | Extractor - Pin S/MECH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104013000 | COLLAR SAFETY COLLAR-DOOR MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104015000 | COLLAR SAFETY COLLAR-DOOR CLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104016000 | PIN PIN-HOIST CARDAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104016001 | PIN PIN-HOIST CARDAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104017000 | RITOOL R I TOOL - ECCENTRIC PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104020000 | PUMP PUMP ASSY-R ACTR MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104021000 | TOOL TOOL - COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104021001 | TOOL TOOL - COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104025000 | SUPPORT STAY (Tool cancelled and NLP) replaced by 98F32104051000 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104025001 | Support Stay Assy (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104037000 | COLLAR COLLAR-SAFETY, DOOR CLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104038000 | R/I TOOL - TOOL PINTLE PINS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32104040000 | HOIST HOIST - CARDAN PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32201000000 | TOOL TOOL,R I-NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32201000001 | TOOL TOOL,R I-NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32201000002 | TOOL TOOL,R I-NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32201005000 | TOOL TOOL,R I-DRAG STAY NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32201008000 | NLG NLG RI TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32201009000 | TOOL TOOL-R I, NLG DRAG STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32201009001 | TOOL TOOL-R I, NLG DRAG STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32201015000 | NLG NLG-R I TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32203002000 | RINLG RI NLG DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32204000000 | HANDTRLL HANDLING TROLLEY LG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32204000001 | HDLGTRLL HANDLING TROLLEY - LG (NLG AND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32204001001 | COLLAR COLLAR-SAFETY, NLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32204003000 | COLLAR COLLAR-SAFETY-DOOR NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301000000 | TOOL TOOL-R I CLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301000001 | TOOL TOOL-R I CLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301001000 | TOOL TOOL,R I-DRAG STAY CLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301014000 | EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301019000 | TOOL R I TOOL-ACTUATOR, CLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301020000 | DOOR RI TOOL CLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301024000 | Extractor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301025000 | EXTRACTOR DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301026000 | EXTRACTR EXTRACTOR - PINTLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301033000 | DRAGSTAY R I TL-DRAG STAY,CLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32301034000 | TOOL TOOL-REMOVAL INSTALLATION,CLG A (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32303004001 | TOOL TOOL R I-ACTUATOR NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32401001000 | REMOVAL / INSTALLATION DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32401001001 | R/I TOOL WHEELS A330/A340 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32404000001 | DRIVE DRIVE TOOL - WHEEL TACH (ABS) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32404000002 | DRIVE DRIVE TOOL - WHEEL TACH (GDR) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F32703500000 | PROTECTOR-CLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F34103000000 | ADAPTER ADAPTER-COVER STATIC PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F34103001000 | FASTENER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F34103002000 | CONTROL,TOOL-FUSELAGE CONTOUR STATPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F34103003000 | FLUSHING TOOL-PITOT PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F36003002001 | TESTSET TEST SET - ENGINE BLEED SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F36003003000 | BLEED SYSTEM TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F36003004000 | REMOVAL/ INSTALLATION DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F36003005000 | R/I PCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F36109001000 | ADAPTORS KIT-BLEED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F38108656000 | DOSER DOSER-WATER DISINFECTION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F47103000000 | LRB PALLET INERTING LRB (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F47103001000 | PALLET PALLET INERTING LRE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52003000040 | POSITIONER,FITTING-AFT DOOR, LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52003000041 | POSITIONER,FITTING-AFT DOOR, RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52003001000 | POSITIONER - FITTING, AFT CLG D (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52003001040 | LH Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52003001041 | RH Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52003002001 | SAFETY BARRIER, PAX DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52003003001 | PROTECTIVE EQUIPMENT, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52003005000 | REAR REAR-NLG DOOR HINGE REPAIR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52003006002 | Safety Barrier LR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52108002000 | GAUGE-MEASURE, DR DAMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52108431000 | BALLAST WEIGHTS ASSY SLIDE RAFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52207519000 | BALLAST WEIGHT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52208441000 | BALLAST BALLAST-WEIGHT,EMERGENCY EXIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52308227002 | STRUT STRUT-SUPPORT,CARGO DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52308279000 | BAR BAR-R I ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52308858000 | DEVICE POSITIONING FORK AFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52308859000 | POSITIONING EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F52308860000 | INSERTION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F53101000000 | SLING RADOME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F53103004000 | ACTUATOR R I NLG ACTUATOR FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F53103005000 | PROTECTN PROTECTION NLG BAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F53103500000 | SLING SLING-RADOME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F53103501000 | DRILL DRILL - ANTENNA, GPS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F53303062000 | REAMER REAMER TOOL CLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003000000 | EXTRACTR PYLON SHAFT EXTRACTOR RIB8 RIB1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003001000 | EXTRACTR EXTRACTOR-PYLON SHAFT, RIB 12 - (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003002000 | TROLLEY TROLLEY-PYLON R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003003000 | GEAR GEAR - HOISTING PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003004000 | BEAM BEAM - LIFTING AT RIB.8 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003005000 | TROLLEY TROLLEY - PYLON STORAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003007000 | ADAPTOR ADAPTOR-DYNAMOMETRIC AT RIB1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003007001 | ADAPTOR ADAPTOR-DYNAMOMETRIC AT RIB1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003008001 | ADAPTOR ADAPTOR-DYNAMOMETRIC AT RIB1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003008002 | ADAPTOR ADAPTOR-DYNAMOMETRIC AT RIB1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003008003 | ADAPTOR ADAPTOR-DYNAMOMETRIC AT RIB1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003008004 | ADAPTOR ADAPTOR-DYNAMOMETRIC AT RIB1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003009000 | TROLLEY TROLLEY-PYLON R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003009001 | TROLLEY TROLLEY-PYLON R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003010000 | GEAR GEAR - HOISTING PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003011000 | TROLLEY TROLLEY - PYLON STORAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003012000 | AIR SHIPPING DOLLY PYLONS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003013000 | BEAM BEAM - HOISTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003025000 | Cantilever Exchange and Control Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003032000 | TOOL TOOL-REMOVAL INSTALLATION, RING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54003040000 | TOOL TOOL SPECIAL-SB 54-3024 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54403000000 | REMINST REMOVAL-INSTALLATION - SPIGOT B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54403002000 | DYNAMOMETRIC ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54403003000 | R/I APF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503000000 | PYLONREM PYLON REMOVAL - WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503001000 | WRENCH WRENCH-PYLON REMOVAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503003000 | TOOL TOOL,R I-ENGINE PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503003001 | TOOL TOOL,R I-ENGINE PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503004000 | WRENCHES WRENCHES CHEST - PYLON REM-INST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503005000 | TOOL TOOL R I-AFT SECONDARY STRUCTUR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503006000 | TROLLEY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503010000 | REBORING REBORING TOOL - WING AND PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F54503028000 | R/I - RSS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55003000000 | Transportation trolley (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55109001000 | SOCKET WRENCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55109003000 | TRESTLE TRESTLE - THS, REMOVAL INSTALLA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55109005000 | SLING SLING - HORIZONTAL STABILIZER, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55109006000 | REMINST REM.-INST. TOOL, THS APRON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55109007000 | TRESTLE - HORIZONTAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55109008000 | SLING SLING - THS, REMOVAL-INSTALLATI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55209004000 | SLING SLING - LIFTING, ELEVATOR R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55209004001 | SLING SLING - LIFTING, ELEVATOR R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55209005000 | REPLACE-BEARINGS,THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55209005001 | REPLACE-BEARINGS,THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55307511001 | SLING SLING-R I VERTICAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55308310000 | BOLTS BOLTS-CENTERING,VERTICAL STABIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55308393000 | SUPPORT SUPPORT - VERTICAL STABILIZER F (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55308393001 | SUPPORT SUPPORT - VERTICAL STABILIZER F (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55308393002 | SUPPORT SUPPORT - VERTICAL STABILIZER F (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55308395000 | EXTRACTO EXTRACTOR-ATTACHING BOLTS,VERTI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55308750000 | SLING, R/I RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F55308821000 | BOLT-CENTERING, VTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F56103000000 | TOOL R I FRONT WINDOW TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F56103500000 | TOOL R I FRONT WINDOW TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004003000 | SPANNER FWD PINTLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004006000 | R/I TOOL S/STAY BUSH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004011000 | RITOOL R I KIT-PINTLE BUSHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004012000 | RITOOL R I KIT-CARDAN BUSHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004012001 | R/I KIT-CARDAN BUSHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004014040 | Jacking Set - Rib 6, LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004014041 | JACKING JACKING SET - RIB 16 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004014042 | JACKING JACKING SET - RIB 21 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004014043 | JACKING JACKING SET - RIB 31 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004014044 | Jacking Set - Rib 6, RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004018000 | GUIDE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004021000 | KIT R I KIT - PINTLE BUSH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004026040 | JACKING JACKING SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004026041 | JACKING JACKING SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004026042 | JACKING JACKING SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004026043 | JACKING JACKING SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004026044 | JACKING JACKING SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004027000 | TOOL TOOL-BEARING, R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004032000 | R/I KIT CARDAN BUSHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004042000 | TOOL TOOL-BEARING-R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004044000 | TOOL-BORING, CARDAN FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57004045000 | R/I TOOL FWD PINTLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57103010000 | TOOL TOOL, SB57-5010 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57103015000 | FASTENER EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57104002040 | JACKING SET RIB - 6LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57104002041 | JACKING SET RIB - 6RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57104002042 | JACKING SET RIB - 16 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57104002044 | JACKING SET RIB - 21 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57104002046 | JACKING SET RIB - 31 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57104003040 | JACKING SET RIB - 6LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57104003041 | JACKING SET RIB - 6RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57104003042 | JACKING SET RIB - 16 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57104003044 | JACKING SET RIB - 27 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57104003046 | JACKING SET RIB – 35 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57304001000 | SLING SLING WING TIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57304002000 | SLING SLING-WINGLET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57304005000 | SLING WINGLET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F57508667000 | HOIST HOIST-DEVICE,FLAP TRACK 2-5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71103001000 | Inlet cowl trolley (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F7110H036-000 | FAN COWL DOOR MAINTENANCE ROD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201000021 | BOOTSTRP BOOTSTRAP SYSTEM,CFMI (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201000021_RtSt | BOOTSTRP BOOTSTRAP SYSTEM,CFMI (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201001020 | CHEST CHEST-TORQUE SET,CFM ENGINE R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201001022 | CHEST CHEST-TORQUE SET, GE ENGINE R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201001024 | CHEST CHEST-TORQUE SET,PW ENGINE R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201001026 | CHEST CHEST-TORQUE SET, TRENT 700 ENG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201001028 | CHEST CHEST-TORQUE SET, RRT500 ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201006022 | BOOTSTRAP SYSTEM-RB211 TRENT (CALIBRATION) | 1 | |
| (CALIB) 98F71201006030 | BOOTSTRP BOOTSTRAP SYSTEM-A330 RR (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201006030_RtSt | BOOTSTRP BOOTSTRAP SYSTEM-A330 RR (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201006032 | BOOTSTRP BOOTSTRAP SYSTEM-A330 PW (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201006032_RtSt | BOOTSTRP BOOTSTRAP SYSTEM-A330 PW (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201006034 | BOOTSTRP BOOTSTRAP SYSTEM-A330 GE (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201006034_RtSt | BOOTSTRP BOOTSTRAP SYSTEM-A330 GE (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201006036 | BOOTSTRP BOOTSTRAP SYSTEM - A340-500-600 (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201006036_RtSt | BOOTSTRP BOOTSTRAP SYSTEM - A340-500-600 (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71201006080 | BOOTSTRAP KIT (CALIBRATION) | 1 | |
| (CALIB) 98F71201006084 | BOOT STRAP SYSTEM-A330 GE (CALIBRATION) | 1 | |
| (CALIB) 98F71203001000 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001001 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001020 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001022 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001024 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001026 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203001028 | MOT. TORQUE WRENCHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203007002 | BOOTSTRAP A330 NEO (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203007002_RtSt | BOOTSTRAP A330 NEO (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203008000 | TORQUE WRENCH SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203012000 | HOISTING ENGINE MOUNT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203502000 | APPRDEV APPROACH DEVICE - FITTING ENGIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F71203503000 | ADAPTOR-BOOTSTRAP/CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F76103000000 | THROTTLE LEVER LOAD MEASUREMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F76103000002 | THROTTLE LEVER LOAD MEASUREMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F76103001000 | THROTTLE LEVER LOAD MEASUREMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F76103001002 | THROTTLE LEVER LOAD MEASUREMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F78003001000 | SLING, THRUST REV COWL GE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98K7110H002-000 | FAN COWL SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98K7160H004-001 | INLET COWL SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98K7830H003-000 | THRUST REVERSER HOISTING FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98K7830H023-000 | THRUST REVERSER OPEN PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07101000000 | ADAPTOR ADAPTOR-JACK NOSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07104001000 | PAD PAD-JACKING,WING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07104003000 | PAD PAD-JACKING,WING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07104005000 | TOOL JACKING TOOL ASSEMBLY PRIMARY S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203000040 | FITTING FR 16 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203000041 | FITTING FR 16 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203000042 | FITTING FITTING FR36 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203000043 | FITTING FITTING FR36 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203000044 | FITTING FITTING FR79-80 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203000045 | FITTING FITTING FR79-80 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203000046 | FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203000047 | FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203000048 | FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203000049 | FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203006000 | ENGINE SHORING RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07203007000 | ENGINE SHORING EA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L07209001000 | ADAPTER – SHORING THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L08103000000 | RODS RODS,SIGHTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L09103000000 | BAR BAR-STEERING,NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L09103001000 | DEBOGGING TOOL, BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L10001005000 | BRAKE SHOE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L10201000000 | MOORING MOORING,KIT-NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L12003001000 | HARNESS HARNESS,SAFETY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L20003000000 | ADAPT MULTI ADAPTOR TRIPOD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L20003001000 | MULTIPURPSE TRIPOD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L20003001001 | MULTIPURPSE TRIPOD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L21003001000 | MIXER UNIT GSE KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L21308497000 | BRIDGE BRIDGE-REMOVAL INSTALLATION SAF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L21503002000 | DEVICE DEVICE,HANDLING-CRU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L21503003000 | CRADLE CRADLE-CRU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L21503006000 | CRADLE CRADLE-CRU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L21508451000 | DEVICE DEVICE - LIFTING, AIR GENERATIO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L21508593000 | DEVICE DEVICE-REMOVAL INSTALLATION,AIR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L21508784000 | KIT-LEAK-TEST-H2-SCS380 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24208550000 | HOIST HOIST-R I,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24208588000 | DEVICE DEVICE-LIFTING,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24208589000 | FRAME FRAME-SUPPORT,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24208636000 | DEVICE DEVICE - FIXING, RAT DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24208678000 | CONE CONE-REMOVAL INSTALLATION,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24209001000 | PIN PIN-SAFETY, RAT UPLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24209002000 | SUPPORT SUPPORT-GTT HOSE, RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24209002001 | Support-GTT Hose, RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24209004000 | HOIST HOIST-KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24303000000 | DEVICE DEVICE,BATTERY REMOVAL INSTALLA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25308547000 | DEVICE DEVICE - REMOVAL INSTALLATION, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25508584000 | DEVICE DEVICE-REMOVAL INSTALLATION,UPP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25508740000 | DEVICE – R/I, LDCRC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25608001000 | Dev-R/I Slide Raft MD1,2,4,5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25608618000 | DEVICE DEVICE-REMOVAL,DEPLOYED SLIDES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25608618001 | DEVICE DEVICE-REMOVAL,DEPLOYED SLIDES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25608677000 | TOOL TOOL-REMOVAL INSTALLATION,SLIDE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25608677050 | HOIST, 4-LEG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25608708000 | BLNCR BALANCER-UD SLIDE RAFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25608709000 | SLING SLING-R I,SLIDE MD3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25708582000 | BRIDGE BRIDGE-ACCESS,FORWARD STAIR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L25708608000 | PLATFORM PLATFORM - ACCESS, FLIGHT CREW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L26203000000 | TESTTOOL TEST TOOL-FIRE EXTINGUISHING SY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L26203000001 | TESTTOOL TEST TOOL-FIRE EXTINGUISHING SY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L26208460000 | DEV R/I FIRE EX.CARGO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27003000000 | TOOL MULTIPURPOSE LIFTING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27003002000 | COLLAR COLLAR, DEPTH ACTU 20 DEGREES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27004000000 | COLLAR COLLAR, SPOILER ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27004004000 | SUPPORT SUPPORT, AILERON ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27004007000 | STRUT AILERON SUPPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27004013000 | STRUT STRUT - SUPPORT, AILERON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27004014000 | STRUT STRUT - SUPPORT, SPOILER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27004020000 | HOIST HOIST- REMOVAL INSTALLATION AIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27004021000 | HOIST-REMOVAL INSTALLATION, SPO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27008634000 | GAUGE-FREEPLAY, TAILPLANE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27009019000 | CONE GUIDE CONE SET - EMPENNAGE SERV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27103000000 | DEVICE DEVICE - R I, AILERONS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27103001000 | MULTI-PURPOSE TROLLEY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27208453000 | SERVO TURN-BARREL,R I,RUDDER SERVO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27208513000 | SUPPORT SUPPORT - SERVO CONTROL, RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27208568000 | DEVICE DEVICE - CLAMPING, CAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27208649000 | BALANCER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27208707000 | BLNCER BALANCER-REMOVAL INSTALLATION,E (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27208713000 | STAND STAND-SUPPORT,EBHA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27209006000 | UPPER RUDDER SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27209010000 | ADAPTER ADAPTER-TURN BARREL, LOWER RUDD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27209011000 | SLING SLING-LOWER RUDDER,R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27209015000 | ADAPTER ADAPTER-TURN BARREL,UPPER RUDDE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27301000000 | TOOL TOOL-ELEVATOR NEUTRAL ADJUSTMEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309001000 | SLING SLING-INNER ELEVATOR, R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309002000 | TROLLEY TROLLEY-ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309002001 | Trolley-Elevator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309003000 | OPTICAL TOOL-INNER EL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309004000 | OPTICAL TOOL-OUTER (L+R) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309005000 | PIN SET-CENTERING, ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309008000 | SUPPORT ADAPTER KIT-EHA OR SERVOCONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27309016000 | SLING SLING-OUTER ELEVATOR, R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27408549000 | EXTRACTR EXTRACTOR-ATTACHMENT BOLTS,THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27408703000 | DEVICE DEVICE-R I,THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27408703001 | DEVICE-R I,THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508444000 | HOIST HOIST-R I,MID FAIRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508444002 | HOISTING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508445000 | HOIST HOIST - REMOVAL INSTALLATION, G (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508468000 | TOOL TOOL-DRIVE,SHAFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508473000 | HOIST HOIST-R I, GRA TR 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508474000 | HOIST HOIST-REMOVAL INSTALLATION HIGH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508474001 | HOIST HOIST-REMOVAL INSTALLATION HIGH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508474002 | HOIST HOIST-REMOVAL INSTALLATION HIGH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508481000 | PINSET PIN SET - NEUTRAL SETTING, FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508486001 | GAGE GAGE-END STOP,GEARED ROTARY ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508594000 | TROLLEY TROLLEY-SUPPORT,FAIRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508599000 | DEVICE DEVICE - ADJUSTMENT, CARRIAGE T (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508612001 | RAIL RAIL-SYSTEM UNIVERSAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508613000 | HOIST HOIST-REMOVAL INSTALLATION,FIX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508644001 | SUPPORT SUPPORT - STRUT, FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508651000 | TOOL-SHARK FIN,FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508651001 | TOOL-SHARK FIN,FLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508652000 | HOISTING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508652001 | HOISTING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508660000 | TEST TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27508661000 | TEST TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27601000000 | TOOL SHIM-SETTING,SPOILER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27603000000 | DEVICE DEVICE, REMOVAL INSTALLATION - (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27801001000 | LOCKNGTL LOCKING TOOL-FLAP SLAT CONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27808645000 | INSPECT INSPECTION-END STOP,DROOP NOSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28004034000 | KIT AIR PRESSURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28004035000 | TEST RIG-AIR PRESSSURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28004042000 | KIT – SENSE LINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28004045000 | KIT - FEED AND TRANSFER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28109001000 | DUMMY DOOR-DUMMY, HTP NACA VENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28109002000 | NACA PROTECTOR-NACA VENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28203001000 | POSITIONING EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28203002000 | DOUBLE WALL PYLON LEAK TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28203004000 | DOUBLE WALL PYLON LEAK TEST 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28209003000 | PROTECTO PROTECTOR-TYPE1 MANHOLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28209004000 | PROTECTO PROTECTOR-TYPE2 AND TYPE3 MANHO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L28209005000 | TEST SET-TR PUMP COV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003000000 | WRENCH WRENCH,HP MANIFOLD FILTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003002000 | TOOLSET TOOL SET,STANDARD TORQUE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003003000 | FLUID HYDRAULIC FLUID CHANGE KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003004000 | HYDR TANK DRAIN TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003006000 | TOOL TOOL REMOVAL INSTALLATION-HYDRA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003007000 | KIT KIT-HYDRAULIC SERVICING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003008000 | CONNECTOR-HYDRAULIC FLUID PURIFIER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29003009000 | SHUNT SHUNT-HSMU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29101002000 | FILLUNIT FILL UNIT AIR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L29103000000 | REMOVAL/ INSTALLATION DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32001000000 | FILLING FILLING KIT-GEAR SHOCK ABSORBER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32003000000 | KIT KIT,GEAR FILLING-SHOCK ABSORBER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32101000000 | DEVICE DEVICE,REMOVAL INSTALLATION-DRA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32101000001 | R/I TOOL DRAG STAY BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32101001000 | DEVICE DEVICE,REMOVAL INSTALLATION-ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32101002000 | R/I BLG D/STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32101005000 | DEVICE DEVICE,REMOVAL INSTALLATION-PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104002000 | COLLAR COLLAR, SAFETY - WLG DOOR ACTUA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104005000 | COLLAR COLLAR, SAFETY - BLG DOOR, CENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104006000 | COLLAR COLLAR-SAFETY,BLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104008000 | SPANNER SPANNER, WLG UPPER CARDAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104015000 | STRUT STRUT-SAFETY, BLG DR FOLDED (WI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104016000 | STRUT STRUT, SAFETY - BLG CENTRE DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104022000 | BEAMS BEAMS, LIFTING - PINTLE, CARDAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104022001 | BEAMS BEAMS, LIFTING - PINTLE, CARDAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104024000 | TOOL-REMOVAL AND INSTALLATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104026000 | COLLAR COLLAR, SAFETY - BLG, OUTER DOO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32104027000 | COLLAR COLLAR, SAFETY - WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32109004000 | SLING SLING, MLG DOOR R-I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32109004001 | SLING, MLG DOOR R-I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32109006001 | DEVICE-BLG OUTER DOOR R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32109007000 | DEVICE-WLGD BLG INNER DOOR R-I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32201000000 | WINCH WINCH-R I NLG LEG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32201000001 | R/I NLG LEG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32201001002 | RI NLG DRAG STRUT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32201001003 | REMOVAL / INSTALLATION DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32201002000 | DEVICE DEVICE,REMOVAL INSTALLATION-NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32201002001 | DEVICE DEVICE,REMOVAL INSTALLATION-NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32201005000 | EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32203000000 | DEVICE DEVICE, REMOVAL INSTALLATION - (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L32204002000 | COLLAR COLLAR, SAFETY - NLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L34103003000 | MFP- SBP TEST PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L36103000000 | EXCHANGR EXCHANGER PRECOOLER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L36103002000 | TESTSET TEST SET - ENGINE BLEED (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 98L36103002001 | TESTSET TEST SET - ENGINE BLEED (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) 98L36103003000 | FLOWMETER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L36109001000 | PCE LEAK TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L36109001001 | PCE LEAK TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L49109001000 | GAUGE-AIR INTAKE, DUCT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L49809003000 | DEVICE FIXTURE-EXHAUST MUFFLER, APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52003000000 | BARRIER BARRIER,SAFETY-UPPER DECK DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52003001000 | DOOR SAFETY POINT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52008592000 | SLING SLING-UNIVERSAL,DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108001000 | SETTING TOOL - UPLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108002000 | SUPPORT-STAND, PAX DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108003000 | STAND, PAINTING PAX DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108004000 | STAND, PAX DOORS PAINT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108506000 | WEIGHT WEIGHT - BALANCE, UPPER DECK DO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108515000 | WEIGHT WEIGHT-BALLAST,SLIDE RAFT MDD 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108516000 | WEIGHT WEIGHT-BALLAST,SLIDE RAFT MDD 2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108519000 | WEIGHT WEIGHT-BALANCE,MAIN DECK DOOR 3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108529000 | TOOLSET TOOL SET-ADJ,UD DOORS 1,2,3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108633000 | WEIGHT WEIGHT-BALANCE,UPPER DECK DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108633001 | WEIGHT-BALLAST,UPPER DECK DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108692001 | TOOL SET-ADJUSTMENT,MAIN DECK DOOR 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108693001 | TOOL SET-ADJUSTMENT,MAIN DECK DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108694001 | TOOL SET - R/I PASSENGER DOOR M3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108695001 | Tool Set - R/I Passenger Door M4 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108696001 | TOOL SET-ADJUSTMENT,MAIN DECK DOOR 5 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108800000 | FRAME-SUPPORT, BALLAST WEIGHT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108802001 | BALLAST WEIGHT, DOOR 2/ POST MOD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52308455000 | LOCK - SAFETY, CARGO DOOR ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52308532000 | BAR - R/I, CC DOOR ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52809001000 | REMOVAL EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53003002000 | ABS0907 GENERATOR KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53103000000 | DEVICE DEVICE,REMOVAL INSTALLATION-RAD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53103006000 | TOOL TOOL SEALANT REMOVAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53103012000 | Y FIT: POSIT TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53303001000 | REMOVAL SET ABS 1505 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53309002000 | KARMAN ZONE DRILLING TEMPLATE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53503001000 | Service platform (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53509006000 | Platform 2B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53509011000 | MAINTENANCE FLOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53509017000 | LADDER LADDER-INSPECTION,S19 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53509020000 | BUSH PUSH - HTTP FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809004000 | MAINTENANCE FLOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809007000 | REARPLA PLATFORM3, S19.1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809013000 | MAINTENANCE FLOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809014000 | SAFETY SUPPORT-S19.1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809017000 | INSTALLATION SUPPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809017001 | INSTALLATION SUPPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809018000 | POSITIONING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809018001 | POSITIONING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809018002 | Pos Tool-Act Fitng. TB (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809019000 | POSITIONING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809020000 | POS TOOL - HINGE FITING 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809021000 | INSTALLATION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L53809023000 | CHECKING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54001000000 | WRENCH SET, PYLON INSTAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54003000000 | ADAPTER ADAPTER,DYNAMOMETRIC NDT RR EA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503002002 | TOOL SPECIAL CONTAINER FOR R I TOOL- (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503002003 | TOOL SPECIAL CONTAINER FOR R I TOOL- (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503003000 | DEVICE DEVICE REMOVAL INSTALLATION-REA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503005000 | DEVICE DEVICE-REMOVAL INSTALLATION,AFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503006000 | TROLLEY TROLLEY-AFT PYLON FAIRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503007000 | TOOL BLANK PLUG KIT-PYLON,RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503007001 | PLUG BLANK PLUG KIT-PYLON,EA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503011000 | DEVICE DEVICE-RI BOOMERANG SPIGOT,RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503011001 | DEVICE DEVICE-RI BOOMERANG SPIGOT,EA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503012000 | DEVICE DEVICE,PROTECTION-PRIMARY PANEL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503013000 | Extractor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503021000 | POSITIONING EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L54503028000 | APF DRAIN SEAL. KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55109001000 | BARSUPP BAR-SUPPORT, FWD HTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55109002000 | SUPPORT SUPPORT SET-SAFETY, LOWER PANEL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55109005000 | SLING SLING-TIP, THS, R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55109006000 | TROLLEY TROLLEY-THS TIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55109007000 | WRENCH-GROOVE NUT, THS SCREW JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55109009000 | INSTALL - HINGE PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55109011000 | WRENCH - LAT BAR, HTTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55209001000 | HINGE FITING- REAMER SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55209003000 | EXTRACTOR-SLEEVES, ELEV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55209004000 | REPLACE BEARING, THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55209005000 | REAMER-SLEEVES, THS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55308521000 | STAND SUPPORT STAND-VERTICAL STABILIZ (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55308591000 | SLING-UNIVERSAL, VTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55308687000 | BOLTS BOLTS-CENTERING,VERTICAL STABIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55308687001 | BOLTS BOLTS CENTERING-VERTICAL STABIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55308809000 | SLING REMOVAL/INSTAL PANEL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L55309001000 | SLING SLING-DORSAL FIN, R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57003000000 | ACCESS BY DOOR MD3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004002000 | CRADLE CRADLE SET - WING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004003000 | DOOR DOOR, DUMMY - NACA VENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004012000 | TOOL TOOL-REMOVAL INSTALLATION,BUSH, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004013000 | KIT KIT-BORING AND CHAMFERING-UPPER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004025000 | KIT KIT-UPPR CARDAN BORING AND CHAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004027000 | PINTLE BUSH KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004028000 | GEAR RIB BORING A380 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004029000 | KIT- R/I TOOL ACTUATOR BUSHES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004031000 | BORING JIG FLP TRK 6 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004031001 | BORING JIG FLP TRK 6 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004032000 | ROUTER JIG - FLP TRK 6 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004033000 | CRADLE CRADLE SET - WING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57004039001 | ROUTER – F/SPAR RIB 8 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57008477000 | HOIST- R/I, TRACK 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57008478000 | HOIST HOIST-R I,TRACK 2-6 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57008479000 | HOIST-RI, CARRIAGE TRACK 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57008480000 | HOIST - REMOVAL INSTALLATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57103001000 | PROTECTOR, CARBON RODS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57104006000 | EXTRACTION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57104010000 | WATER DRAIN KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57104019000 | SP5 BRKT ALIGN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57104021000 | SP7 BRKT ALIGN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57104025000 | FETTLING TABLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57104026000 | SP ACT BRKT ALIGN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57204028000 | WING CRADLE RIB47 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57304000000 | HOIST HOIST-WING TIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57304005000 | CHAMFERING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57304005001 | Chamfering Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508001001 | TRG Track 6 LH/RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508003000 | SUPPORT STAND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508004000 | ALIGNMENT TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508013000 | TOOLSET TRACK LOWERING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508017000 | TOOL SET DRILL TRACK BRIDGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508017001 | TOOL SET DRILL TRACK BRIDGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508018000 | DRILLING TOOL, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508019000 | SUPPORT MIDFLAP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508023000 | DRILLING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508034000 | SET R/I PIVOT BUSHING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508038000 | Toolset drill (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508039000 | TOOLSET DRILL TRACK 5 BRIDGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508040000 | SUPPORT IBFLAP A380 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508040001 | SUPPORT IBFLAP A380 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508043000 | Torque Tool TR2 comp pad bolt (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508653000 | EXTRACTR EXTRACTOR - REMOVAL, FWD TRACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508771000 | TRG FOR TRACK 2 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508771001 | TRG FOR TRACK 2 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508773000 | TRANSPORTFRAME-TRACK 4 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508775000 | TRANSPORTFRAME-TRACK 6 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508775001 | TRANSPORTFRAME-TRACK 6 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57703001000 | TOOL TOOL SET,HINGE BEARING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003000000 | BOOTSTRP BOOTSTRAP SYSTEM - RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003000001 | BOOTSTRP BOOTSTRAP SYSTEM - RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003000002 | BOOTSTRP BOOTSTRAP SYSTEM - RR (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003000002_RtSt | BOOTSTRP BOOTSTRAP SYSTEM - RR (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003000003 | BOOTSTRP BOOTSTRAP SYSTEM - RR (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003000003_RtSt | BOOTSTRP BOOTSTRAP SYSTEM - RR (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003000004 | BOOTSTRP BOOTSTRAP SYSTEM - RR (MSN 3 +) (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003000004_RtSt | BOOTSTRP BOOTSTRAP SYSTEM - RR (MSN 3 +)(Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003000005 | BOOTSTRP BOOTSTRAP SYSTEM - RR (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003000005_RtSt | BOOTSTRP BOOTSTRAP SYSTEM - RR (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003002001 | BOOTSTRP BOOTSTRAP SYSTEM-A380 EA (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003002001_RtSt | BOOTSTRP BOOTSTRAP SYSTEM-A380 EA (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003002002 | BOOTSTRP BOOTSTRAP SYSTEM-A380 EA (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003002002_RtSt | BOOTSTRP BOOTSTRAP SYSTEM-A380 EA (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71003014000 | LIFTING BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7100H001-002 | Hold-open device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7100H003-001 | LOCATOR LOCATOR, R3 AXIAL - TR-FEC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7100H004-000 | STRUT STRUT, HOLD OPEN - TR TO PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7100H005-001 | BRACE BRACE, HOLD OPEN - TR TO FCD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7100H012-000 | BRACE BRACE, HOLD OPEN - TR TO FCD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7100H017-000 | BRACE BRACE-HOLD OPEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7110H001-000 | SLING SLING-INLET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7110H001-001 | SLING SLING-INLET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7110H004-000 | SLING SLING-FAN COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7110H005-000 | DOLLY DOLLY-FAN COWL RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7110H009-000 | DOLLY DOLLY-FAN COWL RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203000000 | WRENCH WRENCH SET,TORQUE-RR(MSN 1,2,4 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203000001 | WRENCH WRENCH SET,TORQUE-RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203001000 | DEVICE DEVICE,RI-ENGINE MOUNTS AND THR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203002001 | TOOL TOOL HOLDING-ENGINE MOUNTS RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203003000 | BEAM BEAM ENGINE TRANSPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203005000 | WRENCH WRENCH SET,TORQUE-EA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L71203009000 | THRUST LINK HOLDING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7810H001-000 | DOLLY DOLLY - EXHAUST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7830H001-003 | Hoisting device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7830H009-002 | SLING – TR/FEC GP 7200 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7830H036-001 | FRAME - C, INBOARD TR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7830H064-000 | LOCKING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7830H067-000 | Lifting Ring TR/FEC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7830H069-000 | LIFTING RING - TR / FEC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7830H071-000 | SLING TRANSCOWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98N1010H001-000 | FAN COWL DOOR PLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98N7160H001-000 | INLET HOISTING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98N7830H013-000 | THRUST REVERSER OPEN PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98N9091 | BATTERY KIT (CALIBRATION) | 1 | |
| (CALIB) 98S26205002000 | LEAKAGE TESTER (CALIBRATION) | 1 | |
| (CALIB) 98S27005001002 | DIGITAL INCLINOMETER (CALIBRATION) | 1 | |
| (CALIB) 98S27005002000 | PORTABLE SYNCHRO READER (CALIBRATION) | 1 | |
| (CALIB) 98S27005002002 | PORTABLE SYNCHRO READER (CALIBRATION) | 2 | |
| (CALIB) 98S27005003000 | CALIBRATION - FLAP CONTROL BOX (CALIBRATION) | 1 | |
| (CALIB) 98S27005003000-CAL | CALIBRATION - FLAP CONTROL BOX (CALIBRATION) | 1 | |
| (CALIB) 98S27005011000 | RUDDER CHECKING JIG (CALIBRATION) | 1 | |
| (CALIB) 98S27005011000-REVF | RUDDER CHECKING JIG (CALIBRATION) | 1 | |
| (CALIB) 98S27008001001-REVD0 | FLIGHT CONTROL ENGINE PINS SET (CALIBRATION) | 1 | |
| (CALIB) 98S27008009006 | ELEVATOR CHECKING JIG-LH (CALIBRATION) | 1 | |
| (CALIB) 98S27008009007 | ELEVATOR CHECKING JIG-RH (CALIBRATION) | 1 | |
| (CALIB) 98S27105006000 | SPRING TAB-AILERON CHECKING JIG (CALIBRATION) | 1 | |
| (CALIB) 98S27105006000-REVB | SPRING TAB AILERON CHECKING JIG LH (CALIBRATION) | 1 | |
| (CALIB) 98S27105006001 | SPRING TAB-AILERON CHECKING JIG (CALIBRATION) | 1 | |
| (CALIB) 98S27105006001-REVB | SPRING TAB AILERON CHECKING JIG RH (CALIBRATION) | 1 | |
| (CALIB) 98S27505001000 | FLAP ACTUATOR DRAIN TOOL (CALIBRATION) | 1 | |
| (CALIB) 98S3420300000 | TOOL COMPENSATION SYNCHROMETER (CALIBRATION) | 1 | |
| (CALIB) 98S34203000000 | TOOL COMPENSATION SYNCHROM (CALIBRATION) | 1 | |
| (CALIB) 98S53003001000 | WEIGHT RELIEF CRADLE (CALIBRATION) | 1 | |
| (CALIB) 98S53005024000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005025000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005027000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005028000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005029000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005030000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005031000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005032000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53005033000 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53305002200 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S53305004000 | SKIN STRINGER CALIBRATION STANDARD-9635A3 | 1 | |
| (CALIB) 98S53305005000 | SKIN STRINGER CALIBRATION STANDARD-9635A4 | 1 | |
| (CALIB) 98S53505003200 | CALIBRE D'ETALONNAGE ULTRASON FR 25 & 27 | 1 | |
| (CALIB) 98S53505006000 | CALIBRATION BLOC | 1 | |
| (CALIB) 98S53805002000 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S54305001200 | CALIBRE D'INSPECTION | 1 | |
| (CALIB) 98S54305001202 | CALIBRATION REFERENCE STANDARD | 1 | |
| (CALIB) 98S54305002200 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S55305011-0003 | CALIBRATION BLOCK (CALIBRATION) | 1 | |
| (CALIB) 98S55305011000 | CALIBRATION STANDARD FOR VTP FITTINGS INSPECTION | 1 | |
| (CALIB) 98S57003018040 | SET JIG INTERNE-9508A10 (CALIBRATION) | 1 | |
| (CALIB) 98S57003018040-CAL | CALIBRATION - JIG FLAP CHECKING (CALIBRATION) | 1 | |
| (CALIB) 98S57003018041 | SET JIG EXTERNE-9508A11 (CALIBRATION) | 1 | |
| (CALIB) 98S57003018041-CAL | CALIBRATION - JIG FLAP CHECKING (CALIBRATION) | 1 | |
| (CALIB) 98S57105004200 | CALIBRE INSPECTION | 1 | |
| (CALIB) 98S57105005200 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S57105006200 | CALIBRE STANDARD NDT | 1 | |
| (CALIB) 98S57105007200 | CALIBRE STANDART NDT | 1 | |
| (CALIB) 98S57105009200 | CALIBRE STANDARD NDT | 1 | |
| (CALIB) 98S57105010200 | CALIBRE INSPECTION | 1 | |
| (CALIB) 98S57105011200 | CALIB FUSELAGE NDT | 1 | |
| (CALIB) 98S57105012200 | CALIBRE INSPECTION | 1 | |
| (CALIB) 98S57105015200 | CALIBRE STANDARD NDT-9941A3 | 1 | |
| (CALIB) 98S57105019200 | CALIBRATION STANDARD FOR NTM 57 14 01 | 1 | |
| (CALIB) 98S57105030200 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S57105031200 | CALIBRATION STANDARD FOR SSI 57-12-12 | 1 | |
| (CALIB) 98S57105032200 | CALIBRATION BLOCK | 1 | |
| (CALIB) 98S57105032202 | CALIBRATION BLOCK | 1 | |
| (CALIB) 98S57105033200 | CALIBRATION STANDARD | 1 | |
| (CALIB) 98S57105034200 | CALIBRE STANDARD POUR SSI-57-12-12 | 1 | |
| (CALIB) 98S57205030000 | CARBON CALIBRATION STANDARD | 1 | |
| (CALIB) 98S61003006000 | PROPELLER BALANCER TOOL (CALIBRATION) | 1 | |
| (CALIB) 98V07101000000 | JACKING-NOSE FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V07104001000 | PLATE - COVER PROTECTION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V07109001000 | ADAPTER - AFT JACKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V07203004000 | FITTING RH, FR 21/22 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V07203005000 | SHORING FITTING FR69 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V07203006000 | FR 69/70 FITTING RIGHT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V07203011000 | FR11/12 FITTING RIGHT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V08103000000 | SIGHTING RODS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V10001002000 | COVER - STATIC PROBE ISP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V10201000000 | MOORING KIT NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V12003000000 | BAY ACCESS PLATFORM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V20003000000 | ELEVATOR PLATFORM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V20003003000 | R/I ELEVATOR PLATFORM A350/A330 NEO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V21503000000 | ADAPTER, R/I VCRU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V21503001000 | R/I AOHX PLENUM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V21503002000 | R/I ACM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V21503003000 | R/I CDM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V21508783000 | KIT-LEAK-TEST-H2-SCS350 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V24003001000 | R/I HEAVY LOAD EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V24203000000 | R/I RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V24203004000 | CFFC LEAK TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V24209001000 | SAFETY PIN - RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V24209002000 | PROTECTION EQUIPMENT - RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V24209004000 | HOLD-OPEN DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V25508748000 | DEV-R/I, CCRC, FCRC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V26203000000 | TEST-FES-ENGINE HALON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V26203000001 | TEST-FES-ENGINE HALON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V26203000002 | TEST-FES-ENGINE HALON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V26203002000 | FIRE EXT CART TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V26208001000 | DEVICE R/I FIRE EXT BOTTLES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V26213000000 | FIRE EXT CART TEST (CALIBRATION) | 1 | |
| (CALIB) 98V27003000000 | PFC RIGGING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27004000000 | R/I TOOL - AILERON ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27004001000 | R/I TOOL - SPOILER ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27004001001 | ACTUATOR REMOVAL TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27004008000 | COLLAR – AILERON ACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27004018000 | STRUT- SUPPORT SPOILER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27104041000 | EBHA R/I TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27104052000 | ACTUATOR COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27208001000 | SUPP-SERVO CTRL, RDDR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27208778000 | TURN BARREL SERVO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27208779000 | BALANCER-R/I, EHA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27208789000 | SUPPORT SERVO CONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27208790000 | STAND SUPP ACT, RDDR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27309001000 | FIXTURE, ELEVATOR ACTUATOR R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27408712000 | DEVICE-R/I THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27408712001 | DEVICE-R/I THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27408717000 | STAND-SUPPORT, THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27503000000 | R/I FLAP PCU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27508003000 | RIGGING BAR FLAP LEVER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27508797000 | RIGGING BAR FLAP LEVER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27508797001 | RIG.-BAR-FLAP-LEVER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27508797002 | RIG.-BAR-FLAP-LEVER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27508799000 | RIGGING PIN ENDSTOP GRA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27508815000 | HOIST FL DR H-A LINK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27508834000 | LFTNG Device GRA 1-4 A350-900 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27543001000 | PCU FAIL-SAFE EXTRACT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27803000000 | R/I SLAT PCU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27803000001 | R/I SLAT PCU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V28003001000 | ADAPTER TEST TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V28004004000 | FUEL PRESSURE GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V28004012000 | HOSE PRESSURE TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V28203003000 | ATEX FUEL TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V29103000000 | RI - EMP YELLOW RESERVOIR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32104000000 | MLG REMOVAL INSTALLATION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32104004000 | CLAMP-RETRACT ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32104007000 | COLLAR - SAFETY MLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32104010000 | SETTING TOOL - UPLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32104013000 | R/I TOOL-FWD SIDE STAY SHACKLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32104017000 | BEAM ASSY - LIFTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32104025001 | SLING - REC MLG LIFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32104041000 | COLLAR-SAFETY MLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32109001000 | HOISTING SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32109001001 | HOISTING SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32109002000 | GUIDE CONE SET-MLGD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32109004000 | HINGE 2 GREASING, MLGD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32201000000 | R/I TOOL - NLG LEG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32201001000 | R/I DRAG STRUT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32201002000 | ACTUATOR R/I TOOL - NLG ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32201002001 | ACTUATOR R/I TOOL - NLG ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32203001000 | R/I FWD NLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32204005000 | COLLAR - SAFETY NLG DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32204006000 | TROLLEY - NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32204008000 | RETAINER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32204010000 | CABLE, GDO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32403001000 | R/I MLG DA AND BREAKING ACCUMULATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32404003000 | LIFTING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32404004000 | BRAKE PACK ALIGN TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V32404007000 | BRAKE LIFTIING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V36003000000 | R/I PCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V36003000001 | R/I PCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V36109001000 | ADAPTER, SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V38108001000 | WASTE TANK FLANGE CLEANING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V38108005000 | KIT-PTWT-SHROUD-PIPES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V44308830000 | TOOL R/I DBTS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V44308842000 | PLATE INST. ADAPT. KU-KA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V49109004000 | HOIST CROSS BAR, APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V51003000000 | Retainer Tool Kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V52008861000 | SLING – UNIVERSAL, DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V52108800000 | FRAME-SUPPORT, BALLAST WEIGHT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V52108812000 | TOOL SET- ADJUSTMENT, PASSENGER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V52108902000 | Set Gauge DRN Hole PD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V52203000000 | CPRSR-JACK, EMERGENCY DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V52308780000 | LOCK-SAFETY, CDA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V52403000000 | CPRSR-Jack, AVNCS Door (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53003004000 | LS Hoisting Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53003005000 | LOWER SHELL CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53009001001 | Test tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53009002001 | LINE SIZING-MAP COMBO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53103000000 | R/I RADOME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53309001000 | CRADLE, RAI PANEL R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53309002000 | CRADLE, RAO PANEL R-I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53408001000 | Hoisting device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53408857000 | SUPPORT-R/I, H-STRUTS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53509001000 | SERVICE PLATFORM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53509002000 | CENTRAL PLATFORM-S19 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53509002001 | CENTRAL PLATFORM-S19 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53509003000 | PLATFORM S19 REAR PLATFORM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53509004000 | VTP LADDER – S19 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53509007000 | NORCOS - S19, FR96 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53509010000 | BH PLATFORM S19 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53509011000 | BUSH RPLACE-ATT FTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53808001000 | SLING TAIL CONE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53809001000 | STAND-SUPP, TAIL CONE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53809002000 | STAND-SUPP, TAIL CONE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V53809003000 | Trestle-Supp, Tail cone (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54003002000 | STORAGE TROLLEY PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54003005000 | R/I APF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503001000 | PYLON R/I WRENCH SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503001001 | PYLON R/I WRENCH SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503001002 | PYLON R/I WRENCH SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503003000 | D/P RSS R/I RSS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503004000 | PLUG N FLY TRANSPORTATION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503011000 | Adaptor Jack - Pylon (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V54503012000 | PYLON INSTALL SAFETY KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55008002000 | Lifting Pads (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55109002000 | BAR SUPPORT, HTP FWD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55109003000 | BAR SUPPORT - THS, FR102 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55109004000 | SLING-HTTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55109007000 | WRENCH KIT-THS REAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55109010000 | TOOL SET - R/I THSA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55109011000 | BEARING TOOL SET-HTTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55109015000 | LLF REPAIR TOOL - HTTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55209001000 | SLING, ELEVATOR R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55308003000 | TORQUE SET VTP BOLTS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55308005000 | KIT-CENTERING BOLT VTP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55308786000 | STAND SUPPORT, VIP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55308833000 | SLING – R/I, VTP PANELS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V55308854000 | STAND SUPPORT RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V56003000000 | R/I WINDOWS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57004010000 | A350-900 CRADLE SET WING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57004071000 | FLE INBD. RIB TEMPLATE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57008835000 | LIFTING DEVICE FLAP SUPPORT BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57103001000 | CWB RODS PROTECTION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57103003000 | CWB MANHOLE PROTECT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57304000000 | SLING - WINGLET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57304000001 | SLING - WINGLET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57304004000 | SLING-WINGLET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57508001000 | SPANNER SET LEVER 1-4 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57508813000 | INSPECT.END STOP DROOP NOSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57508816000 | R/I FLAP LEVER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57508816001 | R/I FLAP LEVER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V57508816002 | R/I FLAP LEVER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V71003002001 | BOOTSTRAP A350 - RR (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V71003002001_RtSt | BOOTSTRAP A350 - RR (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V71003002002 | BOOTSTRAP A350 - RR (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V71003002002_RtSt | BOOTSTRAP A350 - RR (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V71003002003 | BOOTSTRAP A350 - RR (Dimensional Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V71003002003_RtSt | BOOTSTRAP A350 - RR (Return to Service Test) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V71003022001 | ELECTRICAL HOIST KIT (JAPAN AIRLINES) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V71203002000 | TRQE WRENCH SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V72003000000 | RI FAV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 990.00.00.819 | QUICK CALIBRATOR (CALIBRATION) | 1 | |
| (CALIB) 990188 | TEST STAND HYDRAULIC COMPONENTS (CALIBRATION) | 1 | |
| (CALIB) 9912548-8 | ACTUATOR (CALIBRATION) | 1 | |
| (CALIB) 99127-231 | TEST SET BLEED - KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99127-241 | Bleed test set kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99127-251 | Bleed test set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99127B03 | BLEED TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99127B04 | BLEED TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99251-3300223-6003 | PBG OXYGEN FIELD TESTER (CALIBRATION) | 1 | |
| (CALIB) 99A28204002000 | HARNESS-TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A28404000000 | ADAPTOR SEQUENCE VALVE TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A28404001011 | HARNESS HARNESS-TAIL TRIM TANK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A28404001013 | HARNESS HARNESS, TOTAL TANK CAP AND DEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A28404001021 | HARNESS HARNESS - TOTAL TANK CAPACITANC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A29001006000 | TOPPING UNIT-TOPPING UP,HYDRAULIC TANK( (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A32401001000 | EQUIPMEN EQUIPMENT-MEASURING,BRAKE PEDAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A32501010000 | DEVICE - TESTING ADJUSTMENT, N.G. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A34301101400 | ADAPTOR BOX-TEST SET, RADIO ALT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A51107299001 | STANDARD, REFERENCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A53307274000 | Standard Calibration (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A53307292001 | Reference Block (NDT) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A55209001000 | TAP TEST TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A55307306000 | STANDARD, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A55407291000 | FUNCTION TEST STANDARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A5540729100010 | FUNCTION TEST STANDARD (CALIBRATION) | 1 | |
| (CALIB) 99A55407320000 | KIT AIRBUS-KIT THERMOGRAPHY RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A55407321000 | KIT AIRBUS-KIT THERMOGRAPHY RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A55407324000 | KIT AIRBUS-KIT THERMOGRAPHY RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A55407326000 | KIT AIRBUS-KIT THERMOGRAPHY RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57103013000 | NDTKIT NDT KIT - FRAME 47, UPPER RADIU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57103057000 | A300-600 NTM 57-10-42 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57204435000 | KIT KIT, BASE - PHASOR XS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57204436000 | STANDARD STANDARD, REFERENCE - INCLUDING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57504296000 | REFERENCE STANDARD (CALIBRATION) | 2 | |
| (CALIB) 99D24003000000 | PLUG PLUG-ELECTRICAL TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D24003000001 | PLUG PLUG-ELECTRICAL TEST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D27103500000 | TOOL SWITCH SERVO CTL AIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D27303500000 | TOOL SWITCH SERVO CTL AIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D28108418000 | BOX ACT VALVE CONTROL BOX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D32104085000 | TESTBOX TEST BOX - LANDING GEAR SIMULAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D32104086000 | NLG SIMULATOR HARNESS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D32104087000 | MLG SIMULATOR HARNESS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D51107295000 | STANDARD STANDARD, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D51407291001 | STANDARD SET, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54403000006 | Calibration equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54403001002 | REFERENCE STANDARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54403007000 | REFERENC REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54503005000 | Inspection Kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D57204129000 | SET,INSPECTION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D57204164001 | BLOCK-REFERENCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F21008420000 | TEMPERATURE SIMULATING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F28304001000 | Dummy plug (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F53113002000 | AIRBUS CALIBRATION STANDARD A330-200/300 53-11-55 PAGE 28 FIGURE 53-11-55-013-A. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. (CALIBRATION) | 1 | |
| (CALIB) 99F53303032000 | REFERENCE BLOCK (CALIBRATION) | 1 | |
| (CALIB) 99F53303097000 | STANDARD, CALIBRATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F54503003000 | NDT INSPECTION KIT - SB 54-4010 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F54503007000 | NDT INSPECTION KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F54503008001 | NDT INSPECTION KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F54503011000 | REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F54503012000 | REFERENCE BLOCK FOR A330 NTM 54 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99L2620884900 | TEST BOX-CIRCUIT,FIRE EXTINGUISHER SYSTEM (CALIBRATION) | 1 | |
| (CALIB) 99L26208849000 | TEST BOX- CIRCUIT, FES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99L26208849001 | TEST BOX- CIRCUIT, FES (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99L44508762000 | ADAPTER-CVMS, ACCESS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99L57103001000 | WING INSPECTION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99L71003001000 | INSPECTION KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99V29108001000 | SIMULATION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99V36009001000 | LEAK DETECTOR CAMERA TOOL (CALIBRATION) | 1 | |
| (CALIB) 9C1103P04 | COVER, PROTECTIVE – ENGINE (CALIBRATION) | 1 | |
| (CALIB) 9C1132G06 | Fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9C1229G02 | Fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9C1372G01 | ADAPTOR, LIFT-ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9C6020G05 | Lift engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9C6021G03 | Fixture Lift-Main Stand/Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9C6021G04 | Lifting Fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 9C6025P02 | Up-Lift Propulsor Air/Truck Shipping Stand (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A 7550 | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A01025 | LOAD MASTER (CALIBRATION) | 1 | |
| (CALIB) A042829 | COLLAR (TOP) (CALIBRATION) | 1 | |
| (CALIB) A1-42-482 | HOIST HOIST-MINILIFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-43-1096 | HOIST MLG - HOIST EQUIPMENT 10 CWT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-44-349 | HOIST MLG - HOIST EQUIPMENT 25 CWT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-44-372 | HOIST HOIST-MINILIFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-44-376 | DRAGSTRT DRAG STRUT, NLG - REM. INST. EQ (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-61-742 | Minilift Hoist Kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-91-139 | Hoist Minilift (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-91-233 | Hoist Minilift (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-91-265 | HOIST HOIST-MINILIFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-91-394 | SUPPORT FRAME - APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-91-485 | HOIST HOIST-APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1/43/1381 | Didsbury Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A11010 | EXTRACTR EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A11023 | FIXTURE FIXTURE, STRESSING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A11116 | LIFTING EQUIPMENT -LIFTING, NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A11120 | TOOL HOLDING TOOL DRAG STY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A11126 | TOOL TOOL -HOLDING, STEERING ACTUATO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A12001-15 | FUEL SAMPLING EQUPT. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1M-EMB-GE-1 | DATA ACQUISITION GAG-ING EQUIPMENT (REPAIR & CALIBRATION) | 1 | |
| (CALIB) A1MEMBGE4 | DIAL INDICATOR (CALIBRATION) | 1 | |
| (CALIB) A20001-152 | BOOM HOIST GENERAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A20001-65 | ASSEMBLY - HOIST ARM, LONG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A20001-83 | BOOM HOIST GENERAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A20002-4 | Personnel protective equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A20004-78 | Rig Pin Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A21010-190 | TESTER-VACUUM TANK RELIEF VLV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A21010-203 | VACUUM TANK PRESSURE RELIEVE VALVE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A21012-1 | GAGE TEST INSTULENT COOLING 15PSI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A24011-1 | HOIST ADAPTER IDG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A26002-96 | TEST BOX - TIME DELAY, CARGO FIRE EXTINGUISHER BOTTLE (CALIBRATION) | 1 | |
| (CALIB) A27012-30 | Sling, Equipment INBD/ OUTBD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A27015-1 | Sling, Equipment INBD/ OUTBD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A27016-27 | SLING TRAILING EDGE FLAPS INBOARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A27017-41 | SLING LEADING EDGE SLATS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A27021-29 | Adapter Equipment cont. Wheel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A27024-31 | RIGGING BAR - AILERON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A27024-55 | RIGGING BAR - AILERON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A27027-58 | SLING TRAILING EDGE FLAPS OUTBOARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A27124-1 | RUDDER EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) A27124-36 | Load sensing device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A28005-26 | GAGE 0-30PSI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A28014-1 | PHASE CHECKING EQUIPMENT - GROUND FAULT INTERRUPTER RELAY (CALIBRATION) | 1 | |
| (CALIB) A3-91-266 | HOIST HOIST-MINILIFT,THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A3-91-267 | HOIST HOIST-MINILIFT,THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A30199 | MECHANICAL PLIERS (CALIBRATION) | 1 | |
| (CALIB) A3140JM-AP | Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A3192-5MYZ | Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A3192-8MYZ | Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A32027-53 | Pump - Retraction/Extension Landing Gear Actuator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A32032-64 | R/I Equipment - MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A32045-96 | WRENCH SPANNER - NLG WHEEL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A32047-29 | COMPONENT MAINTENANCE EQUIPMENT - SHOCK STRUT, NOSE LANDING GEAR (NLG) (CALIBRATION) | 1 | |
| (CALIB) A32074-1 | BREAK OUT BOX-RELAY SYSTEM / AIR GROUND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A344A008T | MASS BALANCE WEIGHT (CALIBRATION) | 1 | |
| (CALIB) A38001-68 | Vacuum source (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A38006-1 | TESTER,TOILET VACUU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A38FCBGSE | FUEL SUPPLY CONTROL BOX TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A40199 | BAND-IT CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) A52016-1 | RIGGING ADJUSTMENT EQUIPMENT - FORWARD AND AFT CARGO DOORS (CALIBRATION) | 1 | |
| (CALIB) A53001-14 | SLING NOSE RADOME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A54001-167 | Sling Equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A55001-22 | LOCK EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A56001-15 | Hoisting sling, set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A57001-1 | JIG EQUIPMENT - REAMING, TRUNNION SUPPORT, CAGE CODE 81205 - BOEING (CALIBRATION) | 1 | |
| (CALIB) A663160 | REPLKIT REPLENISHMENT KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A71001-191 | Bootstrap (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A71005-33 | INLET COWL SLING PW2000 SERIES ENGINE +PALAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A71015-108 | Lift FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A71030-32 | HOLD OPEN EQPT - FAN COWL P&W ENG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A78019-29 | HAND PUMP - OPENING SYSTEM, THRUST REVERSER (CALIBRATION) | 1 | |
| (CALIB) ABC8VGA | NMB (CALIBRATION) | 1 | |
| (CALIB) ABNC-MD6 | CABLE - MALE BNC TO MICRODOT CONNECTOR 6.0' FT LONG. INCLUDES CERTIFICATE OF CONFORMANCE. 9102894 (CALIBRATION) | 1 | |
| (CALIB) AC21858200 | DRAIN HOSE (CALIBRATION) | 1 | |
| (CALIB) AC21859010 | QUADRANT QUADRANT-GRADUATED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AC21874000 | TOOL TOOL,ADJUSTING ACTUATOR NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AC21874000-1 | TOOL TOOL,ADJUSTING ACTUATOR NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AC21898120-2 | HYDRAULIC TEST SET (CALIBRATION) | 1 | |
| (CALIB) AC21992000-1 | FIXTURE FIXTURE-STRESSING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AC21995000 | EXTRACTOR (CALIBRATION) | 1 | |
| (CALIB) AC21997000 | EXTRACTOR (CALIBRATION) | 1 | |
| (CALIB) AC2K | Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AC60-LP | WEIGHING SCALE (CALIBRATION) | 1 | |
| (CALIB) ACES 2020HR | PROPELLER BALANCER & ANALYSER INCLUDING VIBRATION SENSORS (CALIBRATION) | 1 | |
| (CALIB) ACM-200 | CABLE TENSIOMETER (CALIBRATION) | 2 | |
| (CALIB) ACN16-4F6-R | OLYMPUS CABLE - 16 PIN LEMO TO 4 PIN FISCHER, REFLECTION, 6.0' FEET LONG, NORTEC SERIES INSTRUMENTS. INCLUDES CERTIFICATE OF CONFORMANCE. (CALIBRATION) | 1 | |
| (CALIB) ACN16-N16-6 | 016 PIN CABLE (CALIBRATION) | 1 | |
| (CALIB) ACN16-TF6-R | CABLE - NORTEC (16 PIN LEMO) TO TRIAX FISCHER/LEMO CONNECTOR REFLECTION COIL CONFIGURATION, 6FT LONG, NORTEC 500-2000 SERIES INSTRUMENTS. INCLUDES CERTIFICATE OF CONFORMANCE. (CALIBRATION) | 1 | |
| (CALIB) ACS57001 | Adjustable Lifting Beam (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ACX 250 | Digital Aircraft Cable Tensiometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ACX-250-1 | TENSITRON DIGITAL TENSIOMETER (CALIBRATION) | 1 | |
| (CALIB) ADA320-723-2AC | KIT KIT,ACCESSORY-AIR DATA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADA330-340-946 | KIT KIT,ACCESSORY-AIR DATA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADA380-945 | KIT KIT,ACCESSORY-AIR DATA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADASC053-1 | FAST DOWNLOAD CABLE (CALIBRATION) | 1 | |
| (CALIB) ADSE 650 | ADSE 650 PITOT-STATIC (CALIBRATION) | 2 | |
| (CALIB) ADT222A | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADT222B | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADT5066E | Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS 205 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS 403 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS 405 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS 405F | Air Data Test System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS 505 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS 542F | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS 552F | Air Data Test Set (CALIBRATION) (CALIBRATION) | 5 | |
| (CALIB) ADTS 553F | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS 554F | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS405S | AIR DATA TEST SET (CALIBRATION) | 1 | |
| (CALIB) ADTS505 | TESTSET TEST SET, AIR DATA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS505F | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS530 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS542F | Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ADTS552F | Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 5 | |
| (CALIB) ADTS554F-E3-SCAS | AIR DATA TEST SET (CALIBRATION) | 3 | |
| (CALIB) AE89415Z | FLOWCNTR FLOW CONTROL TEST - RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AF8/WA27F (SEL NO.4) | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AFG 320 | Function Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AG 203 | CR Oscillator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AGE-00639-401 | CABLE, INTERCONNECTION CMC/PC (CALIBRATION) | 1 | |
| (CALIB) AGE-02057-401 | CONTAINER, MODULE SHIPPING - MAU (CALIBRATION) | 1 | |
| (CALIB) AGE-04134-401 | ADAPTERS SET (CALIBRATION) | 1 | |
| (CALIB) AGE-05360-401 | Bootstrap, Set-INSTL/RMV, Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AGE10600A | CHECK CHECK-MOTOR GROUND,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AGE10600B | CHECK CHECK-MOTOR GROUND,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AGE10600C | RATTEST CHECK-MOTOR GROUND,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AGE11212 | GROUNDCK GROUND - CHECKOUT UNIT, RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AGE16505 | PIN - STOW LOCK (CALIBRATION) | 1 | |
| (CALIB) AGE17077 | RAT HYDRAULIC MOTOR TOOL (CALIBRATION) | 1 | |
| (CALIB) AGE17077A | TOOL – RAT GROUND TEST MOTOR (CALIBRATION) | 1 | |
| (CALIB) AGE17077B | GROUND TEST TOOL, AGSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AGE17080A | MOTOR-GROUND TEST,RAT (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) AGE17401 | BRAKE POSITION SENSOR UNIT (BPSU) TEST TOOL (HAMILTON SUNDSTRAND) (MODEL # 99167-AGE17401) (CALIBRATION) | 1 | |
| (CALIB) AGSE-E094-G03 | ENGINE CRADLE, CF34-10E (CALIBRATION) | 1 | |
| (CALIB) AGSE-E169-G02 | ENGINE BASE, CF34-10E (CALIBRATION) | 1 | |
| (CALIB) AGSE-L018-G01 | Lifting Sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT120001 | Oil filling unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT260002 | EXTING. FIRE TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT270007 | Optical alignment set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT290001 | Testequip. - Ram Air Turbine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT290001-CG | PA-RAT1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320003 | Handling Tool, Brake (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320006 | PUMP ASSEMBLY (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) AIT320008-003-01 | Compression Tool - MLG A330/A340-200/300 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-02 | Compression Tool - MLG A340-300B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-03 | Compression Tool - MLG A340-500/600 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-04 | TOOL TOOL-COMPRESSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT320008-003-4 | TOOL-COMPRESSION (CALIBRATION) | 1 | |
| (CALIB) AIT320020-001 | BOGIE COMPRESSION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT710007 | HOLD-OPEN DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT710010 | Hold-open device for fan cowl (Trent 500) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIT780003 | Hand pump (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AIU 410 | Interface Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AJD110303 | PROOFMASTER ASSEMBLY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AJDEN4538-2S | Test tool, set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AL35-45 | TOOL (CALIBRATION) | 2 | |
| (CALIB) ALA 52B | TUA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ALG5H04 | TYRE INFLATOR (CALIBRATION) | 1 | |
| (CALIB) ALPHA C-25 | CHARGER (CALIBRATION) | 1 | |
| (CALIB) ALT 52A | Altimeter Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ALT 8000 | Radio Altimeter Test Set (CALIBRATION) (CALIBRATION) | 5 | |
| (CALIB) ALT-51A | Radio Altimeter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ALT-8000 | RA TESTER (CALIBRATION) | 5 | |
| (CALIB) ANNIS MODEL 25 | MAGNETOMETER(MAGNETIC FIELD INDICATOR) (CALIBRATION) | 1 | |
| (CALIB) AO42794 | MANDREL & BASE ASSY (CALIBRATION) | 1 | |
| (CALIB) AO42795 | MANDREL FOR BEARING ASSY (CALIBRATION) | 1 | |
| (CALIB) AP6108-5-20 | FISHPOLE CHAIN, 5FT MAST - 20FT LIFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AP6108-6-25 | FISHPOLE CHAIN, 6FT MAST - 25FT LIFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) APC 401 | Power Controller (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) API 125 | Function Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) APM-424 V3 | Radar Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) APV7110-01-0G | SLING SLING - INLET COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) APV7112-00-0G | SLINGSET SLING SET - FAN COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) APV7810-02-0G | Sling Set - Thrust Reverser Co (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) APV7812-01-0 | SLING-THURST REVERSER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) APV7813-00-0G | SLING - EXHAUST NOZZLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) APV7820-01-0G | HANDPUMP HAND PUMP - THRUST REVERSER COW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ARA 552 | Radio Altimeter Analog Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ARG 5410 MKII | ELT Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ARINC429 | ARINC 429 DATABUS ANALYZER (CALIBRATION) | 1 | |
| (CALIB) ART. 222 | Trolley Hydraulic Crane (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ART0020711 | OMNIDRIVE USB2 (CALIBRATION) | 1 | |
| (CALIB) ART105 | TORQUE METER (CALIBRATION) | 2 | |
| (CALIB) ARTHERMO | TEMPERATURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) AS700-02 | BATTERY PACK (CALIBRATION) | 1 | |
| (CALIB) ASI 160B | Track Selector (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ASI 175 | Altimeter Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ASI 190 / B | Precision Track Selector (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ASI 2000 | Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ASI 771 | Radar Antenna Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ASI-246-3 | CAPSTAN TEST FIXTURE (CALIBRATION) | 1 | |
| (CALIB) ASI-349-5AV | ACP TESTS SET (CALIBRATION) | 1 | |
| (CALIB) AT-07-004 | SMALL TOOLBOX (CALIBRATION) | 1 | |
| (CALIB) AT520CTK | TESTER CABLE PULL KI (CALIBRATION) | 1 | |
| (CALIB) AT57495 | ASSEMBLY TOOL (CALIBRATION) | 1 | |
| (CALIB) AT700 2 | Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC 1200Y2 | XPDR/DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC 1200Y3 | XPDR/DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC 1400 | XPDR/DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC 600A | XPDR/DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC 600A2 | DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC 601 | Mode S Ramp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC 601 2 | Mode S Ramp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC-5000NG | Transponder Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC-600A | TRANSPONDER/DME TEST SET ATC600A (CALIBRATION) | 1 | |
| (CALIB) ATC-601 | RAMP TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC-601-1 | TRANSPONDER TEST SET (CALIBRATION) | 1 | |
| (CALIB) ATC1400A | XPDR/DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ATC601 | TRANSPONDER TEST SET (CALIBRATION) | 1 | |
| (CALIB) ATC601-2 | TRANSPONDER TEST SET; MODEL ATC601-2 (CALIBRATION) | 1 | |
| (CALIB) ATECH1FS100 | SNAPON ELECTRONIC TORQUE WRENCH (ATECH1FS100) 4~100 INLB (CALIBRATION) | 1 | |
| (CALIB) ATECH2FS100 | SNAPON ELECTRONIC TORQUE WRENCH (ATECH2FS100) 60~1200INLB (CALIBRATION) | 1 | |
| (CALIB) ATECHMS80M | ELECTRONIC TORQUE - ANGLE SCREWDRIVER 4.00 IN-IB TO 80.00IN (CALIBRATION) | 1 | |
| (CALIB) ATEQ BCA | ATEQ BATTERY ANALYZER (CALIBRATION) | 1 | |
| (CALIB) ATIHSSL1/8 | THREADED DRILL LONG NO1/8 (CALIBRATION) | 1 | |
| (CALIB) ATR42V100A | TOOL CASE (FHS) 3520 (CALIBRATION) | 1 | |
| (CALIB) AVX-10K | COMPREHENSIVE FLIGHTLINE TEST SET (CALIBRATION) | 1 | |
| (CALIB) AVX10K | TEST SET - DME (CALIBRATION) | 1 | |
| (CALIB) AW-98A28104000000 | PURGER WATER DRAIN (CALIBRATION) | 1 | |
| (CALIB) AWP05-64-08-050 | NDT 5MHZ PHASED ARRAY RAPIDSCAN 50M (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Alcal 2000 | CHT Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Alpha C-20/25 | Battery Charger (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B-S-1500KG | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B01801E02010100 | TESTER TESTER-PROXIMITY SENSOR,DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B0P50-2M | DC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B19319-0 | FOLD-PACK BANDER (CALIBRATION) | 1 | |
| (CALIB) B19456-1 | ADAPTER, LIGHT SYSTEM TEST (CALIBRATION) | 1 | |
| (CALIB) B27012-1 | SLING EQPT R/I AILERONS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B27013-19 | LOCKING MECHANISM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B27034-1 | Measuring equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B27066-4 | Fitting assy. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B27071-34 | TEST BOX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B28005-42 | PLUG - PRESSURE TEST FUEL SYST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B29005-17 | Simulator- Yaw Damper Module (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) B290P0101102 | PUMP DRIVE TOOL (CALIBRATION) | 1 | |
| (CALIB) B32020-45 | R/I Equip. MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B3924-003 | BATTERY CHARGER (CALIBRATION) | 1 | |
| (CALIB) B3924-004 | BATTERY TEST SET (CALIBRATION) | 1 | |
| (CALIB) B49001-35 | R/I FRA APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B52001-1 | SLING PASSANGER DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B54001-30 | PUMP C DUCT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B54001-53 | PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B54019-41 | Load sensing device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B543DDFS428 | RBC (CALIBRATION) | 1 | |
| (CALIB) B71001-337 | DYNAMOMETER (CALIBRATION) | 1 | |
| (CALIB) B71001-372 | ENGINE HANDLING EQUIPMENT - RB211-535 (CALIBRATION) | 2 | |
| (CALIB) B71023-88 | SLING-THRUST REVERSER PW2037 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B71040-39 | INLET COWL SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B71042-142 | Handling Frame Equipment - C/Duct, RB211-535 Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B78009-26 | LOCK EQUIPMENT - THRUST REVERSER MAINTENANCE (CALIBRATION) | 2 | |
| (CALIB) BB-39A | IFF TEST SET LLMT (CALIBRATION) | 1 | |
| (CALIB) BB30 | PULLER PULLER UNIT, BIG BRUTE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) BB30A | PULLER PULLER UNIT, BIG BRUTE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) BC5000 | Battery Charger (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) BC8000 | Battery Charger (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) BE386-2-5 | TIRE PR GAGE (TPG) (CALIBRATION) | 2 | |
| (CALIB) BETA D-50 | DISCHARGER (CALIBRATION) | 1 | |
| (CALIB) BHM9A | 9PC L/SHP MET BHX WRSET (CALIBRATION) | 1 | |
| (CALIB) BJ 180 | Sight Compass (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) BLRT3 | BONDING AND LOOP RESISTANCE TEST SET (BLRT3 BASIC 1) (CALIBRATION) | 1 | |
| (CALIB) BM 2500 | Databus Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) BM400/2 | ANALOG/ DIGITAL INSULATION AND CONTINUITY TESTER MEGGER (CALIBRATION) | 1 | |
| (CALIB) BM403 2 | Megger (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) BOND MASTER 600M | BOND TESTING FLAW (CALIBRATION) | 1 | |
| (CALIB) BONDMASTER 600 | EDDY CURRENT FLAW DETECTOR (CALIBRATION) | 1 | |
| (CALIB) BONDMASTER600 | EDDY CURRENT FLAW DETECTOR (CALIBRATION) | 1 | |
| (CALIB) BS405 | GENERICO MILIMETERS (CALIBRATION) | 1 | |
| (CALIB) BST-2960-3 | INCLINOMETER (CALIBRATION) | 1 | |
| (CALIB) BT 33 75D | Tensiometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) BT-3 | THERMO HYGROMETER (CALIBRATION) | 1 | |
| (CALIB) BT51 | BONDING METER(LOW RESISTANCE OHMMETER) (CALIBRATION) | 1 | |
| (CALIB) BW-N6W+ | Attenuator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Bonding 620LK | Bonding Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C-27060-1 | ADAPTER ASSEMBLY (CALIBRATION) | 1 | |
| (CALIB) C-55002-1 | PUNCH SET (CALIBRATION) | 1 | |
| (CALIB) C01518150TFIX05-0001 | Mode Select Load Handle (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C12-PCS-3C1N | REFERENCE STANDARD COMPOSITE (CALIBRATION) | 1 | |
| (CALIB) C2-21883 | STFIXTU STRETCHING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C20002-267 | Boom Hoist - Ground Based R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C21002-24 | REVERSE FLUSHER EQUIPMENT - HEAT EXCHANGER (CALIBRATION) | 1 | |
| (CALIB) C21943-0-2 | ADAPTOR ADAPTOR,POSITIONING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C21960 | TROLLEY TROLLEY,HANDLING-MLG SHOCK ABSO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C22003-22 | TEST BOX MACH TRIM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C26002-21 | FIRE EXTINGUISHER TESTER ENGINE/APU (CALIBRATION) | 1 | |
| (CALIB) C26004-33 | TEST EQPT ENGINE FIRE EXTING B737 (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) C26004-34 | PRESSURE GAUGE 0-60PSI (CALIBRATION) | 1 | |
| (CALIB) C26004-83 | TEST EQPT ENGINE FIRE EXTING B737 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C26005-1 | ENGINE FIRE DETECTION SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C26006-1 | TEST BOX - CARGO FIRE EXTING (CALIBRATION) | 1 | |
| (CALIB) C26006-70 | TEST BOX - CARGO FIRE EXTINGUISHING SYSTEM (CALIBRATION) | 2 | |
| (CALIB) C26006-70 CAL FEE | CALIBRATION SERVICE (CALIBRATION) | 1 | |
| (CALIB) C26007-72 | TEST EQUIPT. - CMPT OVERHEAT DETECTION (CALIBRATION) (CALIBRATION) | 3 | |
| (CALIB) C26007-78 | Test Eqpt, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27003-38 | SLING EQPT RUDDER R/INSTL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27006-48 | Test Equip. - Cutout Switch Stabilizer Trim Control (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27006-95 | Test Equip. - Cutout Switch Stabilizer Trim Control (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27007-31 | TEST BOX CUTOUT TESTER STAB TRIM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27028-21 | ELEV TAB RIGGING BAR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27030-94 | Test Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27034-1 | SLING ELEVATOR REMOVAL/NSTALLATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27035-20 | SLING EQPT RUDDER REMOVAL INSTALLATION TMH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C2705-29 | TOOL (CALIBRATION) | 1 | |
| (CALIB) C27050-32 | Handling EQPT - R/I Stab Jackscrew (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27051-1 | LOCK SET - LEADING EDGE SLAT AND KRUEGER FLAP ACTUATORS (CALIBRATION) | 1 | |
| (CALIB) C27052-25 | SLING EQUIP. TRAILING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27052-39 | SLING EQPT - TRAILING EDGE (CALIBRATION) | 1 | |
| (CALIB) C27055-1 | SLING-AILERON, R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27056-19 | Sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27057-1 | LOCKING MECHANISM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27060-1 | ADAPTER EQUIPMENT - CONTROL WHEEL (CALIBRATION) | 1 | |
| (CALIB) C27083-1 | RIGGING BAR - ELEVATOR TAB (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C27107-1 | LOCK SET - FLIGHT SPOILER ACTUATOR (CALIBRATION) | 1 | |
| (CALIB) C28002-9 | DRAIN VALVE(FUEL PUMP) (CALIBRATION) | 1 | |
| (CALIB) C28012-1 | Test assy - Float Switch Conduit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C29002-1 | Test device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C29002-17 | Test device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C2FR14M | Torque Wrench (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C32017-43 | MLG OLEO SEAL REPLCMNT EQUIP. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C32030-10 | Strap Retenition (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C32030-31 | RETENTION STRAP EQPT. (CALIBRATION) | 1 | |
| (CALIB) C32032-98 | Puller Eqpt - Axle/Brake Sleeve MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C32034-211 | Fixture Transportation (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C32034-339 | RMVL/INSTL EQPT. MLG (CALIBRATION) | 1 | |
| (CALIB) C32051-1 | HYDRAULIC BREAKE SYS TEST EQPT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C33001-1 | TEST CABLING-737 BSI LIGHT ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C34005 | EXTENDER BOX-RADIO ALTIMETER RECEIVER TRANSMITTER (CALIBRATION) | 2 | |
| (CALIB) C36001-51 | PRESSURE GAUGE (CALIBRATION) | 2 | |
| (CALIB) C36001-64 | TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C36004-1 | Precooler R/I Eqpt - Engine on (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C36006-1 | Test Equipment - Air Supply Control System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C3FR250F | TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) C44001-55 | Removal/Installation Equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C49004-38 | SLING EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) C49004-40 | APU HANDLING SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C49004-42 | APU Sling assy. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C49007-1 | APU HOIST EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C49007-35 | HOIST EQPT - Auxiliary Power Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C49007-36 | EQUIPT-HOIST,AUX POWER UNIT (CALIBRATION) | 1 | |
| (CALIB) C49007-42 | HOIST EQPT - Auxiliary Power Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C49008-37 | Adapter EQPT - APU Jacking (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C49012-1 | Inst/Rmvl Eqpt - APU Exhaust (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C51003-28 | SKIN MEASURE PRESS GAUGE (CALIBRATION) | 1 | |
| (CALIB) C54001-37 | SLING EQPT.ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C54010-1 | Tool equipment sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C54010-26 | Sling Equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C54021-1 | Sling EQPT - Fuse Pin R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C55001-1 | SLING ELEVATOR REMOVAL/NSTALLATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C55004-1 | SLING ASSEMBLY VERTICAL TAIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C55005-1 | STABILIZER PIN (CALIBRATION) | 1 | |
| (CALIB) C55007-1 | Sling Eqpt - Horizontal Stab. R/I (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) C57002-15 | Hoisting sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71003-235 | BOOTSTRAP EQUIPM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71003-247 | BOOTSTRAP HOIST CFM56-3 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71004-1 | Sling - Inlet Cowl CFM56-3 engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71015-80 | Engine Sling Eqpt - Overhead Shop Handling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71015-83 | ENGINE SHOP HAND SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71020-105 | Engine Bootstrap Kit (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) C71020-7 | AFT DYNAMOMETER (CALIBRATION) | 1 | |
| (CALIB) C71022-6 | TORQUE WRENCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71026-8 | Sling Eqpt. - Fan Cowl, CFM56-7 Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71027-1 | FRAME INLET COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71029-1 | BOOTSTRAP EQUIPMENT - LEAP-1B ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71031-1 | Sling Eqpt. - Fan Cowl, CFM LEAP-1B Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71033-1 | Rem/Instl frame eqpt.-Inlet cowl, CFM Leap (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71040-1 | TORQUE EQUIPMENT - ENGINE MOUNT BOLTS, CFM LEA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C77002-20 | TEST BOX TACHOMETER SYSTEM (CALIBRATION) | 1 | |
| (CALIB) C77004-10 | BOX,TEST,AVM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78003-52 | Sling - Thrust Reverser (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78005-21 | COWLING PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78005-26 | T/R COWL OPENING PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78005-53 | T/R COWL OPENING PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78005-54 | ENGINE PUMP (CALIBRATION) | 1 | |
| (CALIB) C78006-53 | THRUST REVERSER PUMP (CALIBRATION) | 1 | |
| (CALIB) C78012-14 | HOLD OPEN EQPT. ROD ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78018-47 | THRUST REVERSER SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78018-50 | THRUST REVERSER SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78019-15 | T/R HOLD OPEN EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78021-1 | T/R 65 DEG HOLD OPEN TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78022-1 | SLING THRUST REVERSER SLEEVE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78023-1 | T/R COWL ACTUATOR LOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78026-156 | BOOM HOIST (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78031-1 | Sling Eqpt - Thrust Reverser Opening, CFM Leap-1B engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78032-1 | sling equipment trust reverser (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C78033-1 | Hold Open Eqpt - Thrust Reverser, CFM Leap-1B engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C79001-1 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) C85 F=1.5T RK1500MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C85 F=3.0T RK3000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C85 F=3.0T RK4000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C85 F=3.0T RK8000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C85 F=6.0T RK3500MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C85 F=6.0T RK5000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C85 F=6.0T RK5000MM SPECI | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CA-1550 CML | AIRCRAFT BATTERY CHARGER (CALIBRATION) | 1 | |
| (CALIB) CA1150 | Battery Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CA1550ML | Battery Charger (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CATGS1 | HIGHLOCKMETER (CALIBRATION) | 1 | |
| (CALIB) CB602-3 | NUTPLATE PUSHOFF TESTER (CALIBRATION) | 1 | |
| (CALIB) CB602-3-325 | TOOL (CALIBRATION) | 1 | |
| (CALIB) CCT-B458 | SOUND LEVEL METER MODEL 2232 (CALIBRATION) | 1 | |
| (CALIB) CD-6 " PSX | CALIPHER DIGITAL VERNIER (CALIBRATION) | 1 | |
| (CALIB) CEL-120/2 | CASELLA CEL CEL-120/2 SOUND LEVEL CALIBRATOR (CALIBRATION) | 1 | |
| (CALIB) CEL-240 | SOUND LEVEL METER (CALIBRATION) | 1 | |
| (CALIB) CEP21 | ULTRASONIC PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CEP23 | ULTRASONIC PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CEP24 | ULTRASONIC PROBE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CES 116A | ADF Loop Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CFD1142-00-000 | Trolley-Handling, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CFD1142-10-000 | Trolley-Handling, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CFD1142-20-000 | Trolley-Handling, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CFD1541-00-000 | JACK JACK-AUX SUPPORT, 11 US TON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CFD1542-00-000 | JACK JACK-AUX SUPPORT, 9 US TON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG2041000-001 | Elevator Actuartor Lift Device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000022-0001 | ENGINE SUPPORT DOLLY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000024-0001 | WWT TANK REMOVAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000029-0001 | HSTA HOISTING BRACKET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000034-0001 | PICKETING ASSY KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000040-0001 | FIDEX BOTTLE LIFTING ADAPTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000041-0001 | FISHNET LIFTING, SGSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000042-0007 | ENGINE BOOTSTRAP KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000043-0013 | NLG DOOR RIGGING KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000044-0003 | FIDEX TEST KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000045-0001 | IRS KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000048-0001 | FIREX LEAK / OBSTRUCTION TEST KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000050-0019 | WHEEL BIN REM/ INSTL DOLLY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000062-0031 | TOOL, CARGO DOOR ACTUATOR OVERRIDE ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000067-0001 | DOOR SLING KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000074-0023 | PYLON SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000077-0001 | WING ANTI- ICE SENSOR TEST KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000087-0001 | WAIV - TAPRV ENERGIZER KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000088-0001 | AFT EQUIPMENT BAY INTERIOR PLATFORM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000092-0007 | FWD & AFT PAX DOOR SAFETY BARRIER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000093-0007 | FWD & AFT SERVICE DOOR SAFETY BARRIER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000095-0001 | RUDDER RIGGING KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000100-0001 | KIT, DRILLING TOOLS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000103-0001 | HSTAB ZERO LOAD FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9000107-0001 | CARGO DOOR SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9121601-0001 | AIR TEST PANEL (0-100 PSIG) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9210101-0001 | ASSY, TEST, ECS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9213001-0001 | KIT, PRESSURIZATION BLANKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9231001-0001 | SATCOM KIT ( IRIDIUM ) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9262401-0001 | ADAPTER, CARGO POSITIVE PRESSURIZATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9271501-0001 | TOOL, RUDDER BACKLASH CHECK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9272101-0001 | FIXTURE, RUDDER PEDAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9273101-0001 | BACKLASH CHECK TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9275204-0001 | No 1 Flap Track Holder Assy (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9281001-0001 | WING PRESSURIZATION KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9291101-0005 | CHECK VALVE LEAK CHECK ADAPTOR TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9320001-0001 | LANDING GEAR PISTON SUPPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9321201-0007 | LG CONTROL PANEL ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9345101-0001 | LOC Antenna Attenuator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9362101-0001 | BALODS INTEGRITY CHECK KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9381001-0001 | WASTE VACUUM SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9520003-0001 | ADAPTER, HANDLE LOAD - ESCAPE HATCH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9520006-0001 | BAR, DUMMY GIRT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9521001-0001 | FIXTURE, RIGGING, PAX DOOR MECH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9521002-0001 | ADAPTOR, LOAD, INNER HANDLE PAX DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9521201-0001 | FIXTURE, MECHANISM RIGGING, OWEED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9522100-0001 | OWEED DUMMY ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9522101-0001 | MECHANISM, RIGGING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9522102-0001 | FIXTURE, RIGGING MECHANISM, OWEED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9522103-0001 | FIXTURE, SHAFT CAM, RIGGING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9522104-0001 | ADAPTOR, HANDLE LOAD, INNER, OWEED DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9522105-0001 | MECHANISM, RIGGING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9523001-0001 | CARGO DOOR DUMMY ACTUATOR ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9545101-0001 | R7/R8 ALIGNEMENT TOOLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9551001-0001 | H - STAB INSIDE FUSE HOLDING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9783002-0001 | TR PORTABLE MANUAL HAND PUMP ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CHA141478 | BACKLASH BACKLASH CHECKING TOOL - FLAP S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CHA700224 | ADAPTOR ADAPTOR-BACKLASH CHECKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CLASE | GENERICO STATIC V61-10 (CALIBRATION) | 1 | |
| (CALIB) CMS54 | Communications Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CNT 90 | Time/Counter/Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) COMM 120 | Communicator Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) COMM 760 | Communication Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CP11301 | SPRING LOCKING RING (CALIBRATION) | 1 | |
| (CALIB) CP24430 | SHOULDERED PIN ASSEMBLY (CALIBRATION) | 1 | |
| (CALIB) CP30414-1 | FRAME (CALIBRATION) | 1 | |
| (CALIB) CP30735-4 | Installation sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CREF5-04174559100 | CONDUCTIVITY REFERENCE STANDARD (CALIBRATION) | 1 | |
| (CALIB) CS-295-AG118 | TOOL (CALIBRATION) | 1 | |
| (CALIB) CS-295-AG126-C | TOWBAR FLIR PORTUGAL (CALIBRATION) | 1 | |
| (CALIB) CS-295-AG137-C | TOWBAR - AIRCRAFT (CALIBRATION) | 1 | |
| (CALIB) CSA8C/ | PUTTY KNIVE /SCRAPPER (CALIBRATION) | 1 | |
| (CALIB) CT8850 | 18V LI-ION 1 (CALIBRATION) | 1 | |
| (CALIB) CTE3160 | CART - FUEL ACCESSORY PRESERVAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CTE6075 | CART-VACUUM AIRFLOW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CTE8003 | BORESCOPE INSPECTION SYSTEM (CALIBRATION) | 1 | |
| (CALIB) CTS 82 | Auto Pilot Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CTS424R1A | Q POT FUNCTION RIG (CALIBRATION) | 1 | |
| (CALIB) CTS700 | SelCal Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CTS703 | DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CWS-500 | Continuous Wave Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CWS-500D | Continuous Wave Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D00604C1B1A01A0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D00619K2D1E01B0 | TRIPOD JACK, TAIL - A300/A310 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D00622G2D1B01B0 | TRIPOD JACK, TAIL - A320 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D00622G2D1B01B1 | TRIPOD JACK, TAIL - A320 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D00622K2D1E01B0 | TRIPOD JACK, TAIL - A320 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01004G2D1B01B1 | TRIPOD JACK, NOSE (A320) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01040K2D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01045G2D1B01B0 | JACK, TRIPOD - NOSE (A320) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01062E2D1B01B1 | JACK, TRIPOD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01066K2D1B01A0 | TRIPOD JACK, TAIL (E170/190) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01243G2D1B01B1 | TRIPOD JACK, TAIL (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01243K2D1B01B1 | TRIPOD JACK, TAIL (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01243K2D1E01B0 | TRIPOD JACK, TAIL (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01255-001 | TRIPOD JACK, TAIL (A380) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01526K2D1B01A0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01536K2D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D01708K2D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D02033-001 | JACK JACK, SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D02034-001 | JACK JACK, SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D02035-001 | JACK JACK, SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D02036-001 | JACK JACK, SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D02036-003 | JACK JACK, SHORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D02537K2D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D02538K2D1B01A0 | TRIPOD JACK, WING (E170/190) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D03011 | Tripod jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D03012K2D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D03022G2D1B01B0 | TRIPOD JACK, WING (A320) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D03022G2D1B01B1 | TRIPOD JACK, WING (A320) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D04011K2D1E01B0 | TRIPOD JACK, WING (A320) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D05505K3D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D08004-001 | JACK, LIFTING WINGS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D08011K3D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D08502K3D1E01B0 | TRIPOD JACK, WING (A300/A310) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D10033-06060404 | UNION (CALIBRATION) | 1 | |
| (CALIB) D10036-04 | UNION (CALIBRATION) | 1 | |
| (CALIB) D10036-06 | UNION (CALIBRATION) | 1 | |
| (CALIB) D10036-08 | UNION (CALIBRATION) | 1 | |
| (CALIB) D10036-10 | UNION (CALIBRATION) | 1 | |
| (CALIB) D10036-12 | UNION (CALIBRATION) | 1 | |
| (CALIB) D11007K3D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D11007K3D1E01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D11008K3D1E01B1 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D11009K3D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D11012-001 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D11012K3D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D11015K3D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D12007E3D1B01B0 | TRIPOD JACK, WING (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D12007G3D1B01B1 | TRIPOD JACK, WING (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D12007K3D1B01B0 | TRIPOD JACK, WING (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D12007K3D1E01B0 | TRIPOD JACK, WING (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D14089-101 | VACUUM ADAPTER (CALIBRATION) | 1 | |
| (CALIB) D19001-001 | TRIPOD JACK, WING (A380) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D2551025400000 | PANEL (CALIBRATION) | 1 | |
| (CALIB) D38999/26FA98SA | ELECTRICAL CONNECTOR FOR PRESSURE TRANSDUCER (CALIBRATION) | 1 | |
| (CALIB) D420449 | ALLAN KEY SET (CALIBRATION) | 1 | |
| (CALIB) D46347 | EXTRACTR EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D51600 | Pitot Static Leak Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D60340 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D7105 10 | 2 Way Comb/Divider (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D71STA00004G05 | ENGINE STAND ASSY (CALIBRATION) | 1 | |
| (CALIB) D71STA00022G03 | ENGINE STAND PW1100 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=0.75T RSK1500MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=0.75T RSK3000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=1.5T RSK1500MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=1.5T RSK5000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=1.5T RSK7000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=3.0T RSK1500MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=3.0T RSK2000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=3.0T RSK3000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=3.0T RSK3500MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=3.0T RSK4000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D85 F=6.0T RSK3000MM | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D8B | PUMP PUMP, VACUUM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) D9299140400100 | HARNESS (CALIBRATION) | 1 | |
| (CALIB) D9855-04 | TEE (CALIBRATION) | 1 | |
| (CALIB) D9855-08 | TEE (TEXTRON) (CALIBRATION) | 1 | |
| (CALIB) D9855-10 | TEE (CALIBRATION) | 1 | |
| (CALIB) D9855-12 | TEE (CALIBRATION) | 1 | |
| (CALIB) DALT 55 | Digital Altitude Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DAPT65-0094-00 | GREASE PUMP (CALIBRATION) | 1 | |
| (CALIB) DAS 650 | Airspeed Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DAT08AEFKT5001 | Tool kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DAT08AEKTS5015 | Tool kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DB-45-B7R | SPL/SELF POWERED LIGHTING INC. T LIGHT COMPARATOR (CALIBRATION) | 1 | |
| (CALIB) DB62 | Decade Resistor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DBHM9 | DOUBLE BALL MM HEX WRENCH SET (CALIBRATION) | 1 | |
| (CALIB) DBHS13 | DOUBLE BALL SAE HEX WRENCH SET (CALIBRATION) | 1 | |
| (CALIB) DC UP TO 100 MHZ | FUNTIONS GENERATOR ISO TECH (CALIBRATION) | 1 | |
| (CALIB) DC-1250 | DATA RECORDER (CALIBRATION) | 1 | |
| (CALIB) DC-CTC24-M | CHARGER AND TRICKLE CHARGER (CALIBRATION) | 2 | |
| (CALIB) DC1250 | DATA RECORDER (CALIBRATION) | 1 | |
| (CALIB) DC400 | Digital DC Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) DC400 (101-00800) DC400A (101-00850) WITH DC400A MODULE | DIGITAL DC FUEL QUANTITY TEST SET (BARFIELD INC.) (CALIBRATION) | 1 | |
| (CALIB) DC400A | FUEL TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DCS60 18E | Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DET-KIT-8103-5 | HELIUM DETECTION KIT A350 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DET05AEKT0003 | PERMASWAGE KIT (CALIBRATION) | 1 | |
| (CALIB) DET05AEKTIL01A | TOOL KIT, DET-LARGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DET05AEKTIM01A | TOOL KIT, DET-LARGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DET05AEKTIS01A | TOOL KIT, DET-SMALL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DET0X4200 | HELITEST OXYGEN KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DETTPS8001 | TANK PRESSURISATION SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DETW40052 | KIT-HELITEST WING 3.1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DF-7708 | Interface Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DFA 75B | TUA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DFQ40K | Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) DG-2500N | MECHANICAL FORCE GAUGE(PUSH PULL GAUGE) (562 LBF) (CALIBRATION) | 1 | |
| (CALIB) DG-2500N(562 | MECHANICAL FORCE GAUGE(PUSH PULL GAUGE) (CALIBRATION) | 1 | |
| (CALIB) DG-2500N(562 LBF) | MECHANICAL FORCE GAUGE(PUSH (CALIBRATION) | 1 | |
| (CALIB) DH1025PM | TANK ENG OIL FILL UP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DH13PM | OIL FILLING UNIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DHC-29435-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-61:PG7 (CALIBRATION) | 1 | |
| (CALIB) DHC29198-003 | CALIBRATION TEST STANDARD (CALIBRATION) | 1 | |
| (CALIB) DHK21 | SACA PIN (CALIBRATION) | 1 | |
| (CALIB) DIR-001 | AJUSTE Y PRUEBA VALVE (CALIBRATION) | 1 | |
| (CALIB) DKA320531290-1 | DURABLE TOOLING (CALIBRATION) | 1 | |
| (CALIB) DLRO-10X | Digital Low Resistance Ohmmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DLT02MAPP1000 | PUMP-PERMASWAGE AIR DRIVEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DLT05PSKT3000 | PERMASWAGE TOOL KIT (CALIBRATION) | 1 | |
| (CALIB) DLT30MAPW0000 | POWER UNIT, MODEL 30 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DLTFRPSKT0000 | DEUTSCH PERMASWAGE KIT - SIZES 04 06 08 10 12 (CALIBRATION) | 1 | |
| (CALIB) DLTFRPSKT3001 | REPAIR KIT FROM PERMASWAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DLTFRPSKT3004 | FIELD REPAIR KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DLTFRPSKT3028A | REPAIR KIT, FIELD - SIZE 04 TO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DMA 37B | TUA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DMC169 | DIES & MICROMETER (CALIBRATION) | 1 | |
| (CALIB) DMC519 | TOOLKIT ELECTRICIAN SERVICE TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DMC899 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) DMC899-2 | CRIMPING TOOL KIT-KABLO TAMIR KITI (CALIBRATION) | 1 | |
| (CALIB) DPG2000BBL300PSIG-5 | AIRCRAFT TIRE PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) DPI314 | EPR TEST SET (CALIBRATION) | 1 | |
| (CALIB) DPS-1000 | Digital Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 3 | |
| (CALIB) DPS1000 | DIGITAL PITOT STATIC TEST SET (CALIBRATION) | 3 | |
| (CALIB) DPS350 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DPS400 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DPS450 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DPS500 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DPS501 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DPST-3500M | PRECISION DIGITAL PITOT STATIC TEST SET. (CALIBRATION) | 2 | |
| (CALIB) DPT2500 | MULTIPLIE, ELECTRONIC TORQUE (CALIBRATION) | 1 | |
| (CALIB) DPTR010C1220004600 | Tripod Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRA 707 | Radio Altimeter Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRA707 | TEST SET - DIGITAL RADIO ALTIMETER (CALIBRATION) | 1 | |
| (CALIB) DRA707B1 | TEST SET - DIGITAL RADIO ALTIMETER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68003 | COMPRESS COMPRESSOR - SPRING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68006 | SPRING SPRING-EXPANDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68024 | GAG GAG - BOGIE BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68032 | SPANNER SPANNER - A LINK NUT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68216 | Shock Strut Load Fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68230 | GAG GAG, SHOCK ABSORBER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68822 | ADAPTOR ADAPTOR-TORQUE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68835 | ADAPTOR ADAPTOR-TORQUE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68837 | GAG GAG-BRAKE ROD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68838 | GAG GAG-SHOCK ABSORBER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68839 | GAG GAG-BOGIE BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68840 | CLAMP CLAMP SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68864 | LOCK STAY BRACE TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68923 | GROUND LOCK SLEEVE_MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68930 | TOOL TOOL-GLAND ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68933 | POST-ASSEMBLY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT68934 | EXTRACTOR-PIN S STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT69426 | Spring compressor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRT69442 | SETTING TOOL - SIDE STAY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DRX8534 | TSI DUST TRAK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DS335 | Function Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DSE-100X/L | RADIOMETER/PHOTOMETER (CALIBRATION) | 1 | |
| (CALIB) DSO 1022A | OSCILLOSSCOPE DSO1014A AGILENT (CALIBRATION) | 1 | |
| (CALIB) DSO3202A | Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DSP-100 | Digital Cable Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DSRS RT 6 7 | Decade Synchro/Resolver Std (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT0408-002 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT0643A2B1A01A0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT1009K2D1B01A0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT1033-010 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT1033K2D1E01B0 | TRIPOD JACK, NOSE (A320) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT1033L3D2B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT1035A2C1A01A0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT1039A2D1A01A0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT1080K2B1A01A0 | Tripod Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT1246F2D1A01A0 | TRIPOD JACK (EUROFIGHTER) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT1247E2D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT1251-001 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT200 | 429/CSDB Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT2025K2D1E01B0 | TRIPOD JACK, NOSE (A300/A310) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT2029K3D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT250 | 429/ASCB Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT3507E2D1B01B1 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT3509G3D1B01B1 | TRIPOD JACK, NOSE (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT3509K3D1B01B0 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT3509K3D1B01B1 | TRIPOD JACK, NOSE (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT3509K3D1E01B0 | TRIPOD JACK, NOSE (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT350H | ASCB Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT3515E3D1B01B0 | TRIPOD JACK, NOSE (A330/A340) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT400 | 429 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT400H | 429 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT5510-001 | TRIPOD JACK, NOSE (A380) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT600 | 429/629 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT600-00-220 | DATABUS ANALYZER (CALIBRATION) | 2 | |
| (CALIB) DT6000-00-220 | TOOL (CALIBRATION) | 2 | |
| (CALIB) DT650 | 629 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT6507-002 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DT650H | 629 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) DV131748 | VIDEO TRAINING (CALIBRATION) | 1 | |
| (CALIB) DZZ7460-501 | TESTER SWITCH BOX AUTO PILOT (CALIBRATION) | 1 | |
| (CALIB) Datatrac 200 | 429/CSDB Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Datatrac 250 | 429/ASCB Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Datatrac 350H | ASCB Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Datatrac 400 | 429 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Datatrac 400H | 429 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Datatrac 600 | 429/629 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Datatrac 650 | 629 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Datatrac 650H | 629 Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E2A | Differential Pressure Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E4401A B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E4402A B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E4404A B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E4407B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E4411A B | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E4418B | Power Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E4425B | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E4438C | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E4443A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E5061A | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E5062A | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E5071A B C | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E5100A B | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E69026 | TESTER, FLOW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E7402A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E8257D | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) E8357A | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EC013-001 | ENGINE CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EEDM503D | TRADITIONAL DIGITAL MULTIMETER (CALIBRATION) | 2 | |
| (CALIB) EEDM509B | DIGITAL AC/DC CLAMP ON METER (CALIBRATION) | 1 | |
| (CALIB) EEDM525F | ENHANCED MULTIMETER TRMS-COLOR (CALIBRATION) | 2 | |
| (CALIB) EFS10 | Model II Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EFS40 50 | TUA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EFS40 DUP/CP | Cable (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EFS50 DU CP | Cable (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EKA320531290-1 | SLEEVE, FLARED, TUBE FITTING; CBS-8-1-N-16F SLEEVE (CALIBRATION) | 1 | |
| (CALIB) EMA84 | MANOMTR MANOMETER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EMA84-10-5-1 | DIGMANOM DIGITAL MANOMETER - 0 TO 10 KPA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EMB-00168-001 | TESTER,LEAK-FUEL TANKS (CALIBRATION) | 1 | |
| (CALIB) EMB-00168-003 | FUEL LINE LEAKAGE TEST BOX (CALIBRATION) | 2 | |
| (CALIB) EME11001L001 | SHUTTLE,ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EMT320001 | REMOVAL TOOL, MLG PINTLE PIN (CALIBRATION) | 1 | |
| (CALIB) ERJ170/190-945 | KIT - AIR DATA ACCESSORIES (CALIBRATION) | 1 | |
| (CALIB) ESA L1500A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ESC-1 /97845 | UNIWEST SCANNER - ESC-1 MINI ROTATING (CALIBRATION) | 1 | |
| (CALIB) ESNBLRT2KIT | ESN MEASUREMENT TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EVS300 | ILS/VOR Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) EXBD300-50047-001 | CALIBRATION TEST STANDARD (CALIBRATION) | 1 | |
| (CALIB) EXTECH-445703 | BIG DIGIT HYGRO-THERMOMETER (CALIBRATION) | 3 | |
| (CALIB) F1395993 | LUMNCMTR LUMINANCE METER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F21974 | FIXTURE STREACHING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F26504000 | HOLDING TOOL (CALIBRATION) | 1 | |
| (CALIB) F26506000 | LOCKING TOOL (CALIBRATION) | 1 | |
| (CALIB) F26792000-1 | SENSOR SENSOR-VOLTAGE TEST (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) F26793000 | TESTER-CURRENT, SERVOVALVE (CALIBRATION) | 1 | |
| (CALIB) F26793000-1 | TESTER, SERVOVALVE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F27061000 | TOOL TOOL-BRAKE HANDLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F27220000 | Hoisting Device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F27767000 | BENCH-TEST, ELECTRICAL (CALIBRATION) | 1 | |
| (CALIB) F300 | TORQUE METER (CALIBRATION) | 1 | |
| (CALIB) F5358953100100 | RAIL,ACCESSORY,ACFT:RAIL ASSY- MUFFLER (CALIBRATION) | 1 | |
| (CALIB) F70199-1 | INFLATION TOOL - TIRE (CALIBRATION) | 1 | |
| (CALIB) F70199-14 | TOOL (CALIBRATION) | 1 | |
| (CALIB) F70199-15 | VALVE COVER ALLY (CALIBRATION) | 1 | |
| (CALIB) F70199-16 | TOOL (CALIBRATION) | 1 | |
| (CALIB) F70199-21 | TOOL (CALIBRATION) | 1 | |
| (CALIB) F70199-22 | RELIEF VALVE (CALIBRATION) | 1 | |
| (CALIB) F70199-23 | TOOL (CALIBRATION) | 1 | |
| (CALIB) F70199-30 | TOOL TIRE INFLATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F70199-34 | RELIEF VALVE (CALIBRATION) | 1 | |
| (CALIB) F70199-52 | TOOL TIRE INFLATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F70199-7 | CROSS (F70199-1) (CALIBRATION) | 1 | |
| (CALIB) F70199-8 | NIPPLE (F70199-1) (CALIBRATION) | 1 | |
| (CALIB) F70200-1 | INFLATION TOOL - STRUT (CALIBRATION) | 1 | |
| (CALIB) F70200-14 | INFLATION TOOL STRUT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F70200-18 | INFLATION TOOL STRUT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F70207-139 | KIT RIGGING PIN (CALIBRATION) | 1 | |
| (CALIB) F70284-1 | WEAR GAGE SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F70328-1 | Probe (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F71292-A | CONTROL SURFACE (CALIBRATION) | 1 | |
| (CALIB) F71329 | TRACER - LEAKAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F72917-19 | GROUND FAULT TESTER (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) F72917-20 | CONSOLE ASSY (CALIBRATION) | 2 | |
| (CALIB) F72928-58 | Air Pressure Regulator Eqpm. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F72977-44 | Gage Eqpt - Hydraulic Brake System Pressure Checking (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F72977-62 | Gage Eqpt - Hydraulic Brake System Pressure Checking (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F7XC203259602 | Hydraulic Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F80006-52 | Sling assy - Horizontal Stabilizer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F80014-16 | HOIST ADAPTER STABILIZER JACKSCREW (CALIBRATION) | 1 | |
| (CALIB) F80014-2 | HANDING EQOIPMENT STABILI (CALIBRATION) | 1 | |
| (CALIB) F80114-25 | CRADLE ASSY APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F80114-82 | CRADLE-APU HOISTING EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) F80212-30 | ADAPTER RUDDER PEDAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F80213-73 | Hoisting sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F80213-78 | SLING TRAILING EDGE FLAPS OUTBOARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F80217-139 | AUTO PILOT TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F80229-52 | TEST EQUIPMENT - FIRE EXTINGUISHING (CALIBRATION) | 1 | |
| (CALIB) F80229-69 | TEST EQPT FIRE EXTING SYS (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) F80239-21 | SAFETY LANYARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) F80255-11 | ALINMENT& GUIDE EQUIP (CALIBRATION) | 1 | |
| (CALIB) FB51-600-B757M | Fishpole Hoist APU B757 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FB541-600-A320THSM | FISH POLE HOIST (CALIBRATION) | 1 | |
| (CALIB) FB541-601-777AM | Fishpole Hoist APU B777 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FC 7015 | Frequency Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FDIX 50 | DEC GAUGE - FORCE, PUSH/PULL/SPRING SCALE (CALIBRATION) | 2 | |
| (CALIB) FDOO03D23654000 | LOCKING STEERING PIN (CALIBRATION) | 1 | |
| (CALIB) FDOO04D23664000 | M.L.G LOCKING PIN (CALIBRATION) | 1 | |
| (CALIB) FDS-400-301 | HHMPI - HANDHELD MULTI PURPOSE INTERFACE (CALIBRATION) | 1 | |
| (CALIB) FDS40-0202 | L3 - FA-2100 INTERFACE CABLE (CALIBRATION) | 1 | |
| (CALIB) FDS40-0203 | HONEYWELL SSFDR INTERFACE CABLE (CALIBRATION) | 1 | |
| (CALIB) FDS40-0227 | SOFTWARE OPTION (CALIBRATION) | 1 | |
| (CALIB) FDS40-0232 | HONEYWELL HFR5-D INTERFACE CABLE (CALIBRATION) | 1 | |
| (CALIB) FDS40-0247 | ARINC-757 CVR RACK ADAPTOR - NOTE: CVR DOWNLOAD ON AIRCRAFT (CALIBRATION) | 1 | |
| (CALIB) FDS40-0301 | HAND HELD MULTI PURPOSE INTERFACE (CALIBRATION) | 1 | |
| (CALIB) FDS400-201 | CABLE INTERFACE SET (CALIBRATION) | 1 | |
| (CALIB) FDS400-215 | ADAPTOR RACK CVR (CALIBRATION) | 1 | |
| (CALIB) FDS400-216 | INTERFACE CABLE CVR (CALIBRATION) | 1 | |
| (CALIB) FDS400-274 | INTERFACE CABLE (CALIBRATION) | 1 | |
| (CALIB) FDS400-301 | HHMPI (CALIBRATION) | 1 | |
| (CALIB) FE1125 | TOOL (CALIBRATION) | 1 | |
| (CALIB) FEN06E21 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FEN06E2170 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FEN10E2170 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FEN15A21 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FEN351E2170 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FEN352A21 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FEN501-001 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FENT101A21 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FENT101E21 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FENT252-001 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FENT354-003 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FENT354A21 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FGFB955501 | HORIZONTAL STAB MEASURING SET (CALIBRATION) | 1 | |
| (CALIB) FH6431C2B1A01A0 | Tripod Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FHAD46-41 | DIGITAL SENSOR; ALMEMO 2590-2A (CALIBRATION) | 1 | |
| (CALIB) FIL3300 | TOOL OIL MIGRATION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FIL3600 | PLATE, GEAR SUPPORT TRANSFER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FIL8100B6-250 | TROLLEY R I TROLLEY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FIL8200 | HANDLING TROLLEY-NLG, A330/A340 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FIL8210A | TROLLEY TROLLEY-HANDLING, NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FIL8300 | TROLLEY TROLLEY, HANDLING - NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FIL8310 | TROLLEY TROLLEY, HANDLING - WLG BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FIL8400 | TROLLEY TROLLEY, REMOVAL INSTALLATION - (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FIL8700 | TROLLEY TROLLEY - AGU, R I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FLUKE 117 | MULTIMETER (CALIBRATION) | 1 | |
| (CALIB) FLUKE 175 | MULTIMETER DIGITAL (CALIBRATION) | 2 | |
| (CALIB) FLUKE 179 | DIGITAL MULTIMETER (CALIBRATION) | 2 | |
| (CALIB) FLUKE 287 | MULTIMETER DIGITAL (CALIBRATION) | 2 | |
| (CALIB) FLUKE 302 | FLUKE 302 CLAMP METER (CALIBRATION) | 2 | |
| (CALIB) FLUKE 63 | INFRARED THERMOMETER (CALIBRATION) | 2 | |
| (CALIB) FLUKE 79 | DIGITAL MULTIMETER (CALIBRATION) | 2 | |
| (CALIB) FLUKE 87 | MULTI METER (CALIBRATION) | 2 | |
| (CALIB) FLUKE179 | DIGITAL MULTIMETER (CALIBRATION) | 2 | |
| (CALIB) FLUKE52 | THERMOMETER (CALIBRATION) | 2 | |
| (CALIB) FLUKE79 | MULTIMETER (CALIBRATION) | 2 | |
| (CALIB) FM 500N | DYNAMOMETER (CALIBRATION) | 2 | |
| (CALIB) FM AM 1000S | Radio Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FM AM 1100 | Radio Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FM AM 1100S | Radio Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FM AM 1200A | Comm. Service Monitor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FM AM 1200S | Comm. Service Monitor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FM AM 1500 | Comm. Service Monitor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FM AM 1600S | Comm. Service Monitor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FM AM 500A | Comm. Service Monitor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FMG4400D | STROBE FLASH MEASURING GUN CALIBRATION | 1 | |
| (CALIB) FPK-PRO-104 | FLAP PEENING TOOL KIT (CALIBRATION) | 1 | |
| (CALIB) FPK-PRO-105 | ROTARY FLAPPER PEENING FLAPSPEED (CALIBRATION) | 1 | |
| (CALIB) FQS-046 | HY-LITE® LUMINOMETER (CALIBRATION) | 1 | |
| (CALIB) FSEA20 | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FSEA30 | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FSEB30 | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FSH3 | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FT20 | POWERPAK POWERPAK OF HYDR.PRESSURE COMPR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FT200 | POWERPAK POWERPAK OF HYDR.PRESSURE COMPR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FT200B | POWERPAK POWERPAK OF HYDR.PRESSURE COMPR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) FTIA320531290-1 | TOOL (CALIBRATION) | 1 | |
| (CALIB) FTR 7060-5 | FUEL INJECTOR TESTER STAND (CALIBRATION) | 1 | |
| (CALIB) FTR-7060-5 | FUEL CONTROL TEST STAND (CALIBRATION) | 1 | |
| (CALIB) FTR7060- 5 | FUEL INJECTOR TESTER STAND (CALIBRATION) | 1 | |
| (CALIB) FU10C | UNIVERSAL SOCKET 5/16" (12 POINT) (CALIBRATION) | 1 | |
| (CALIB) Fluke 70 20 Series | Series III Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G21003-1 | Probe Static Pressure (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G24012-1 | Generator adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G26006-61 | Cleanning Eqpt. - Smoke Detection System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G27023-126 | Test Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G27047-54 | Hoisting sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G27060-1 | Sling Eqpt, R/I Outboard Aileron (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G27073-1 | Bootstrap Clamp Eqpt Fairing T.E. Flap Tr (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G28013-20 | Test Eqpt - Override/ Jettison Fuel Pump, Fault Current Detector (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G28018-28 | Test device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G28018-33 | TEST EQUIPMENT - ENGINE FUEL FEED MANIFOLD (CALIBRATION) | 1 | |
| (CALIB) G29010-1 | R/I RQPT Air Drive Unit & Pump (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G29014-1 | Extension Equipment - Ground Serv. Disconnect, L/R Hydraulic Syst. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G29015 | TOOL (CALIBRATION) | 1 | |
| (CALIB) G29015-2 | GFCI TESTER HYDRAULIC PUMP (CALIBRATION) | 1 | |
| (CALIB) G32007-1 | Protector-Axle, Wing and Body Landing Gear (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G32048-38 | Locking Mechanism (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G32049-1 | Locking Mechanism (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G34002-1 | Angle Measurement System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G34002-2 | AOA sensor Calibrator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G36035-1 | Test Equipment - Pneumatic System Health check (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G36035-36 | Test-Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G38004-13 | Cleaning device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G38004-17 | Blockage Removal Tool - Vacuum Lav System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G38006-1 | EQUIPMENT - REMOVAL,WASTE BLOCKAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G49002-96 | Cradle Equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G49005-42 | Sling Eqpt - A.P.U. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G49005-61 | Sling Eqpt - A.P.U. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G49008-1 | SLING APU REAR MOUNT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G49009-1 | Support Eqpt-APU Exhaust Pipe (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G5-5M0-319-0000 | MLG WHEEL TACHOMETER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G5-5M0-320-0100 | Test device (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) G5-5M0-320-0300 | Test device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G5-5M0-320-0400 | 28VDC POWER SUPPLY TOOL A320-0400 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G5-5M0-321-0000 | Test device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G5-5M0-321-0001 | CHECKING TOOL DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G51001-30 | Measurement Eqpt - Check, Skin Smoothness (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G53002-34 | Sling - Radome assy (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G54016-1 | Sling Equipment-Strut removal/installation (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G5M5M0-113-0000 | TEST SET-SMOKE DETECTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G600-210004-227 | KIT, PNEUMATIC PRESSURE TEST 220V/50HZ (CALIBRATION) | 1 | |
| (CALIB) G600-273505-1 | STALL COMPUTER TESTER (CALIBRATION) | 1 | |
| (CALIB) G601-210007-201 | KIT, PNEUMATIC PRESSURE TEST 220-240V/50 (CALIBRATION) | 1 | |
| (CALIB) G601R200003-1 | DIAL KIT INDICATOR (CALIBRATION) | 1 | |
| (CALIB) G71001-181 | Bootstrap Eqpt - CF6-80C2B Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71001-60 | Brace assy. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71010-80 | HANDLING EQPT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71013-1 | Hoisting sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71022-54 | Hold open eqpt-eng fan/core cowl CF6-80 C2 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71037-130 | Engine Change Kit - GENX-2B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71038-1 | UNLOCKING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71040-1 | Transportation Eqpt - Engine mount stabilization (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71042-41 | HOIST EQUIPMENT - ENGINE MOUNT, FWD AND AFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71043-1 | Sling equipment,Fan cowl (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G71045-2 | CHAIN HOIST 3 TON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G76002-18 | PROTRACTOR-THRUST REVERSER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G76002-19 | PROTRACTOR-THRUST REVERSER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G78002-1 | Hold open set - Thrust Reverser Cowl (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G78003-53 | SLING EQPT FAN REVERSER CF6-80C2B ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G78008-77 | REMOVAL / INSTALLATION DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GCEU6-3 | RAT TEST SET (CALIBRATION) | 1 | |
| (CALIB) GD-15 | Tension Gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GDS 2102 | Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GDS 8246 | Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GDS 840S | Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GEKKO | ULTRASONIC EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GET710002 | Alignment Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GM1DS34CK010-2 | TEMPERATURE CONTROLLER KIT (CALIBRATION) | 1 | |
| (CALIB) GMIDS00HK010-2 | HEATING HEATING SYSTEM - 220 VOLTS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GMIDS32HK010-2 | KIT KIT-BLANKETS, HEATING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GMIDS34CK010-2 | NDT CONTROLLER, HEATING BLANKETS - (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GMIDS34HK010-2 | NDT BLANKETS, FLEXIBLE HEATING - 22 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GMIDS34TK010-2 | NDT TRANSFORMER KIT, 110 - 220 V (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GMT220 | CRIMP TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GMT226 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) GNS-734A-1L | GPS Satellite Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GNS-743 | GPS Satellite Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GNS-743A | GPS Satellite Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GNS-743A-2 | GPS Satellite Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GNS-743A-2L | GPS Satellite Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GNS-746A-1 | GPS Satellite Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GPS101 2 | GPS Satellite Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GPSG-1000 | Portable Satellite Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GQT2R200NP | TORQUE WRENCH 40-200 IN/LBS (CALIBRATION) | 1 | |
| (CALIB) GS 100 | GPS Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GS 50 | L1 Signal Channel Simulator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GS18298 | KIT (CALIBRATION) | 1 | |
| (CALIB) GS18300 | KIT BALANCE ADAPTER (CALIBRATION) | 1 | |
| (CALIB) GS25565-1 | TEST FIXTURE ASSY, LOW-STAGE BLEED CHECK-VALVE (CALIBRATION) | 1 | |
| (CALIB) GSB2000009 | PROTRACTOR − DIGITAL (CALIBRATION) | 1 | |
| (CALIB) GSE 099 | GUN - 1/4 HYDRAULIC SYSTEM OIL REPLENISHING (PHOSPHATE ESTER) (CALIBRATION) | 1 | |
| (CALIB) GSE196-LTC52071 | HOISTING DEVICE, OVERWING EMERGENCY DOOR (CALIBRATION) | 1 | |
| (CALIB) GSE55742 | GAG GAG, BRAKE ROD - WLG AND BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55787 | SPRING SPRING - COMPRESSOR, WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55904 | KIT KIT-LOWER BEARING, R I, BLG AND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55918 | HOIST HOIST EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55922 | LIFTING TOOL ASSY BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55923 | SPANNER SPANNER, AXLE NUT - WLG AND BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55926 | Hoisting sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55927 | TOOL-INSERTION EXTRACTION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55931 | RESTRAIN RESTRAINT, BOGIE TRIM - BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55932 | RESTRAIN RESTRAINT, BOGIE BEAM - BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55934 | EXPANDER EXPANDER, SPRING - BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55935 | HANDLE HANDLE - EXTENSION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55942 | GAG GAG - SHOCK ABSORBER, WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55944 | EQUIPMNT EQUIPMENT -LIFTING, WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55946 | HOIST HOIST - EQUIPMENT, BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55947 | RESTRAIN RESTRAINT - DRAG BRACE ASSY, BL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55948 | HOIST HOIST - EQUIPMENT, WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55949 | RESTRAIN RESTRAINT-BOGIE ACTUATOR,WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55950 | RESTRAIN RESTRAINT - BOGIE TRIM, WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55951 | GAG GAG, SIDE STAY - WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55952 | LINK - DE-BOGGING, BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE56007 | GAG GAG, SHOCK ABSORBER - BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE56042 | HOIST HOIST-EQUIPMENT,WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE56043 | HOIST HOIST - EQUIPMENT, WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE56076 | HOIST HOIST - EQUIPMENT, BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE56111 | TOOL TOOL, COMPRESSION - SHOCK STRUT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE56212 | CLAMP - SIDE STAY WLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE56785 | Rigging Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSG L1 | GPS Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GST 6108 (610007AB) | ULTRASONIC LEAKAGE METER (CALIBRATION) | 1 | |
| (CALIB) GTF 6 | Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) H-2657 | FUEL PUMP REPOSITION/PRESSURE TEST (CALIBRATION) | 1 | |
| (CALIB) H0A6L | Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) H1X1001 | SLING FAN (S./NO. F03415) (CALIBRATION) | 1 | |
| (CALIB) H21815 | TOOL HANDLING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) H21815-1000 | TOOL HANDLING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) H21901 | TOOL HOISTING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) H294 | TESTER-THERMOCOUPLES SWITCHES K-TYPE (CALIBRATION) | 1 | |
| (CALIB) H394 | TESTER-THERMOCOUPLES SWITCHES K-TYPE (CALIBRATION) | 1 | |
| (CALIB) H394-115 | TEST DEVICE K-TYPE (CALIBRATION) | 1 | |
| (CALIB) H394R | TESTER-THERMOCOUPLES SWITCHES K-TYPE (CALIBRATION) | 2 | |
| (CALIB) H394SERIES | TESTER-THERMOCOUPLES SWITCHES K-TYPE (CALIBRATION) | 1 | |
| (CALIB) H400 | RPM TEST SET HOWEL INSTRUMENT (CALIBRATION) | 1 | |
| (CALIB) HC1042 | GAUGE, PRESSURE 0-5000 PSI1 (CALIBRATION) | 2 | |
| (CALIB) HC132H0009-000 | Engine Hoist Gear (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HC132H0184-000 | REPAIR OVERHAUL NOSE SLING COWL (CALIBRATION) | 1 | |
| (CALIB) HC132H0217-000 | Sling - Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HCS9200B | HOT BONDER DUAL ZONE 9200B KIT (CALIBRATION) | 1 | |
| (CALIB) HCS9200B-AV | HOT BONDER DUAL ZONE 9200B KIT (CALIBRATION) | 1 | |
| (CALIB) HCS9200B-EV | HOT BONDER (CALIBRATION) | 1 | |
| (CALIB) HCU5038 | Screw plug gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HCU5039 | Screw plug gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HD428L | KEENSEERT TOOL (CALIBRATION) | 1 | |
| (CALIB) HFK-02 | RAM AIR TURBINE COMPLETE TEST KIT (CALIBRATION) | 1 | |
| (CALIB) HFK02 | Flow Control test kit and checkout unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HG05 | Engine Removal/Installation Device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HG11 | Installation eqpt (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HG20 | Hoisting Equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HG22-001 | Hoisting device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HG23-001 | Lifting Sling, Rescue Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HG45 | Heissgeschirr (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HGPU50-30-1S | Hydraulic tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HI 9126 | WATERPROOF PORTABLE PH/MV METE (CALIBRATION) | 1 | |
| (CALIB) HIX1001-0G | SLING HANDLING SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HIX4001 | PUMP PUMP-ACTUATOR, FAN REVERSER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HLA6424 | DIGITAL PRESSURE GAUGE 0-31 BAR (CALIBRATION) | 1 | |
| (CALIB) HMAN-AF-100-P-00200-G08-R-316 | PREASSURE GAUGE 200 PSI (CALIBRATION) | 1 | |
| (CALIB) HORIZONTAL STAB SLINGS | CALIBRATE AND RE-CERTIFY THIS TOOL (HORIZONTAL STAB SLINGS) IN ACCORDANCE WITH BOEING DWG C55007 REV. D (OR LATER) AND LOLER 1998 (OR LATER). TEST/CALIBRATION CERTIFICATE MUST REFERENCE MAINTENANCE DATA (MANUAL/STANDARD) AND REVISION USED. ADDITIONAL REFE | 1 | |
| (CALIB) HPK-67 | COMPASS (CALIBRATION) | 1 | |
| (CALIB) HRK-01 | HYCOM RAT KIT (CALIBRATION) | 1 | |
| (CALIB) HRK01 | RAT TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HRT-01 | GROUND CHECK MOTOR (CALIBRATION) | 1 | |
| (CALIB) HRT01 | RAT Ground check motor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HSE737-0010-7 | SLING-WINGLET (CALIBRATION) | 1 | |
| (CALIB) HSH6 | CHAIN HOIST (CALIBRATION) | 1 | |
| (CALIB) HSK6263-1 | PRESSURE LATCH TESTER (CALIBRATION) | 1 | |
| (CALIB) HSR 203 488 | Synchro Resolver Angle Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HST22DU5-22 | TOOL (CALIBRATION) | 1 | |
| (CALIB) HT-102 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) HT-95 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) HT20002E1SZX350 | GPU, HYDRAULIC - 55 GPM, 3000 A (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HTC-2 | THERMO HYGROMETER (CALIBRATION) | 1 | |
| (CALIB) HU17602 | SETTING GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU17604 | SETTING GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU17606 | SETTING GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU17610 | SETTING GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU21580 | Test Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU36634 | Sling, R/I-Engine Rear Mount (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU37485-1 | DROP CHECK GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU37486-1 | GAUGE, MEASURE, VARIOUS OPERATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU37879 | Calibration tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU38629 | Torque multiplier (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU39037-1 | Protrusion Ignitor (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) HU40025 | Driving Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU40239 | DRILL BUSHING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU40246 | DIGITAL DEPTH CALIPER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU40813 | Master Curvic Base (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU41413 | Disc, Slave (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU42021 | Runout Checking Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU43341 | SETTING GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU50067-1 | Rigging Pin (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55060-1 | SLING SLING-BEAM,HANDLING ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55060-2 | Sling-Beam Handling Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55083-5 | HOISTING EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55108-3 | R/I COMMON NOZZLE ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55148 | HAND PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55151-1 | BRACE BRACE-HOLD OPEN COWLS RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55152-1 | BRACE BRACE-HOLD OPEN COWLS LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55186 | HOISTING SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55231 | Trolley (Upper) CNA Fit Removal & Parking (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55419 | Engine sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55761 | LIFTING ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55864 | Jack Gearbox Accessoires (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU55868 | Sling Beam (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU56201-1 | SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU56514-1 | Pedestals, Engine Parking (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU56537 | LIFTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU56545 | Lifter, Gearbox Accessoires (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU56545-2 | Lifter, Gearbox Accessoires (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU80624-1 | Fixture, HYD CYL Align LPC S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU80624-2 | Fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU81858 | Spring Balance (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU82365 | Profile gauge, set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU82381 | Hand Pump – Trust Reverser (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87113-1 | Safety Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87127 | R-I NO.2 HINGE PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87128 | EXTRACTR EXTRACTOR, R-I NO.3,4 HINGE PIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87129 | EXTRACTOR-R I N.5 HINGE PIN T R (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87131-1 | EXTRACTR EXTRACTOR - LOCK WASHER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87133 | SLING SLING - THRUST REVERSER COWLS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU87521 | Test Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU88000 | SLING SLING-R I HINGED COWLS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU88000-1 | SLING-R I HINGED COWLS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HU89025-1 | SLING SLING TURNOVER - AIR INTAKE COW (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) HW93718 | LIFT FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) I05081M020 | ANTISTATIC SURFACE TESTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1F10023 | ASSEMBLY STAND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1F10043 | FIXTURE SUPPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1F10260 | HOISTING SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1J12125 | EXTRACTOR WITH SLIDE HAMMER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1J12188 | Bolt, Puller (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1J12359 | Bridge, Inspection No. 3 BRG Seal Runner, Intermediate (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1J12514 | Setting Fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1N20002 | SLING SLING-FAN THRUST REVERSER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1N20003 | Hoisting sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1N20009 | PUMP PUMP HYDRAULIC UNIT-REVERSER C- (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1N20014 | Sling, FWD Engine Mount V2500 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1N20015 | Hoisting sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1N20403 | SLING SLING-INLET COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1N20404 | SLING SLING-FAN COWL DOORS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1P16092 | Gage Igniter Immersion (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE1R18891 | PIN, RIGGING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE2J13314 | Slide gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IAE2R18901 | TAP TESTER THOUR UNI (CALIBRATION) | 1 | |
| (CALIB) IAE2R19437 | Test Device (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) IAEIP16092 | GAGE, IGNITER (CALIBRATION) | 1 | |
| (CALIB) IDGR54-007 | IDG REM/INST DEV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IDGR54-101 | IDG REM/INST DEV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IDGR54E02 | IDG REM/INST DEV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IDGR54F02 | IDG REM/INST DEV (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IFF-701TI | Transponder Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IFR 2975 | Radio Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IFR 4000 | NAV/COMM Test Set (CALIBRATION) (CALIBRATION) | 3 | |
| (CALIB) IFR 6000 | XPDR/DME/TCAS Test Set (CALIBRATION) (CALIBRATION) | 3 | |
| (CALIB) IFR 6015 | XPDR/DME/TCAS/Military E- TCAS, TACAN, IFF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IFR-4000-EMB | IFR 4000 NAV/COMM TEST SET (CALIBRATION) | 1 | |
| (CALIB) IFR-6000-EMB | IFR 6000 NAV/COMM TEST SET (CALIBRATION) | 1 | |
| (CALIB) IFR4000 | NAV/COMM TEST SET (CALIBRATION) | 3 | |
| (CALIB) IFR6000 | RAMP TEST SET (CALIBRATION) (CALIBRATION) | 3 | |
| (CALIB) IFR6000/ATC-601 | TEST SET- MODE S/A/C TRANSPONDER, RAMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IM2FSAL1 | Loop Resistance Tester AIRLINER SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IM2FSAL2 | Loop Resistance Tester AIRLINER SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) IMAG001 | MAGNA CHECK 3D KIT (CALIBRATION) | 1 | |
| (CALIB) IMFB-100LB | PUSH PULL GAUGE (IMADA) (CALIBRATION) | 1 | |
| (CALIB) IMFB-100LB(IM | PUSH PULL GAUGE (CALIBRATION) | 1 | |
| (CALIB) IMFB-100LB(IMADA) | PUSH PULL GAUGE (CALIBRATION) | 1 | |
| (CALIB) IPES-1B | TESTER FOR IPE (CALIBRATION) | 1 | |
| (CALIB) ISO5171-0/16 BAR | MANOMETER 0/16 BAR (CALIBRATION) | 1 | |
| (CALIB) IT-4-270 | TORQUE LIMITER (CALIBRATION) | 1 | |
| (CALIB) ITPS0571 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) ITPS0585 | GUAGE (CALIBRATION) | 1 | |
| (CALIB) ITPS0621 | GAUGE (CALIBRATION) | 1 | |
| (CALIB) IV9000N-BX | BASE UNIT DELUXE (CALIBRATION) | 1 | |
| (CALIB) J-AXLE60A | Axle Jack 60t (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J-AXLE90AHPA | Axle Jack 90t (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J07013-1 | JACKING EQPT MLG AXLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J20001-1 | HOIST EQPT. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J20002-44 | LOAD POSITIONER - ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J20002-59 | LOAD POSITIONER - ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J20005-17 | PERSONNEL EQPT.- UPPER WING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J20006-24 | PERSONNEL EQPT - SHOCK ABSORBING LNYD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J20009-110 | JACK ASSEMBLY - HYDRAULIC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J20009-68 | JACKING EQPT - HYDRAULIC TELESCOPING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J21001-82 | HX Adapter assy. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J23002-16 | ADAPTER EQUIPMENT - HOIST, CROWN ZONE (CALIBRATION) | 1 | |
| (CALIB) J24001-43 | Hoist Adapter- VSCF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J24001-50 | Hoist Adapter- VSCF (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J24005-1 | HOIST EQPT. - APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J24014-24 | GFCI Tester - Hydraulic, Jettison and override pumps (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J26002-3 | CARD – EXTENDER P61 OVERHEAD PANELS (CALIBRATION) | 1 | |
| (CALIB) J26004-25 | Connecting Cable Compl. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J26007-1 | TEST BOX, CARGO SMOKE HEATER, TEST PLUG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J26008-35 | TEST EQUIPMENT, ENG.FIRE SYS. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27005-48 | LOCK eqpt -INBD/OUTBD, SPOILER ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27006-43 | SLING EQIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27008-13 | Sling - removal/installation, aileron (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27013-20 | SLING EQPT - R/I ELEVATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27014-19 | Sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27023-54 | EQPT- R/I Transmission (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27024-66 | SLING EQPT - RUDDER, R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27025-1 | Hoisting sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27027-52 | HOIST EQPT REM/INSTL, RUDDER PCU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27036-53 | Cradle Assy (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27076-11 | Test assy - Pressure Switch, Nose Gear (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27079-31 | INSPECTION EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J27079-38 | INSPECTION EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J28010-140 | CONSOLE EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) J28017-37 | TOOL (CALIBRATION) | 1 | |
| (CALIB) J32001-64 | Measuring EQPT, Brake Pedal (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32001-67 | Measuring EQPT, Brake Pedal (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) J32001-68 | Measuring EQPT, Brake Pedal (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32019-59 | Hoisting sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32026-1 | SLING EQPT - HANDLING, NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32027-63 | HOIST EQPT - R/I, NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32034-1 | Turnbuckle (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32037-122 | SPRING REM / INST EQPT - MLG & NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32054-117 | Retainer EQPT - MLG/NLG Torsion Link (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32054-92 | Retainer EQPT - MLG/NLG Torsion Link (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32073-21 | Hoist equipment R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J32087-1 | TURNBUCKLE EQPT - SHOCK STRUT, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J34002-19 | Test Fixture - Angle of attack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J36020-1 | R/I EQPT - PRECOOLER, GE90 ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J38001-20 | PRESS EQUPMNT- WASTE DRAIN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J46002-16 | BREAKOUT BOX ARINC600 CONN FIBER OPT (CALIBRATION) | 1 | |
| (CALIB) J46002-6 | BREAKOUT BOX - FIBER OPTIC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J46002-7 | BREAKOUT BOX - FIBER OPTIC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J46002-9 | BREAKOUT BOX - FIBER OPTIC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J47023 | WRENCH (CALIBRATION) | 1 | |
| (CALIB) J47309 | COMPRESSION TOOL (CALIBRATION) | 1 | |
| (CALIB) J47310 | HOLDING TOO (CALIBRATION) | 1 | |
| (CALIB) J47313 | FITTING SUPPORT (CALIBRATION) | 1 | |
| (CALIB) J47347 | DRIFT (CALIBRATION) | 1 | |
| (CALIB) J47548 | PROTECTOR NLG (CALIBRATION) | 1 | |
| (CALIB) J47548-1 | AXLE PROTECTOR A320/A321 (CALIBRATION) | 1 | |
| (CALIB) J47548-2 | THREAD PROTECTOR NLG A320/321 (CALIBRATION) | 1 | |
| (CALIB) J480T-268 | ELCOMETER 480 GLOSSMETER (CALIBRATION) | 1 | |
| (CALIB) J49001-9 | BALLAST FISHPOLE INST, APU REBERATOR REMOVED (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J49002-29 | Sling APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J49003-43 | Hoisting device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J52029-57 | TEST EQPT - SQUIB, OVERWING EXIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J55002-36 | Supporting device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J55002-37 | LOCK AY, HORIZONTAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J55006-114 | TORQUE EQUIPMENT – VERTICAL FIN BOLTS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J6066CXCERT | 200-1000 IN/IBS TORQUE WRENCH (CALIBRATION) | 2 | |
| (CALIB) J71001-63 | SLING INLET COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J71001-66 | Hoisting device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J71002-75 | Torque Eqpt. Engine Mount bolts (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J71002-95 | Torque Eqpt. Engine Mount bolts (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J71004-9 | Hoisting sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J71009-17 | HYD FUSE ASSY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J71015-14 | Sling eqpt.-Fan cowl support beam (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J71015-18 | Sling eqpt.-Fan cowl support beam (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J71033-109 | Hold-open device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J71043-131 | Bootstrap EQPT - GE90 Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J78003-27 | Hold-open device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J78004-123 | Hoisting device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J78004-89 | SLING-THRUST REVERSR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J78004-90 | SLING-THRUST REVERSR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J78007-85 | R/I device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J78015-77 | Sling equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J78015-96 | Sling Equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J78017-59 | EQPT – SLING, FAN THRUST REVERSER, TRENT 800 ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) JAH660 | 60T MLG JACK (CALIBRATION) | 1 | |
| (CALIB) JC410C | VOLTMETER, W/PROBE (CALIBRATION) | 1 | |
| (CALIB) JFP201M | Differental Pressure Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) JMPCFM56D4462 | TOOL-PROBE-ENGINE WASHING RIG (B737-700/800/900, CFM56-7) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) JT ALPHA JOYSTICK | ENDOSCOPE (CALIBRATION) | 1 | |
| (CALIB) JT2000AIRBUS | TOOL TOOL-NOSE WHEEL ALIGNMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) JT2000AIRBUSAR | TOOL TOOL-NOSE WHEEL ALIGNMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) JXP-7 | HUD SYSTEM TESTER (CALIBRATION) | 1 | |
| (CALIB) K05001-1 | MLG Parking Break (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K1SM | UNIT SEARCH (CALIBRATION) | 1 | |
| (CALIB) K20001-64 | Hoist - FWD EE Bay LRUS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K20002-25 | EQUIPMENT - SHOCK ABSORBING LANYARD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K20008-55 | Hoisting device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21004-72 | Adapter equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21006-46 | Jack adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21006-53 | Jack Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21008-1 | JACK ADAPTER - AIR CYCLE MACHINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21010-45 | ADAPTER - JACK, RAM AIR FAN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21011-59 | ADAPTER - JACK, ADJUST ANGLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21011-62 | Jack Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21013-36 | R/I EQUIPMENT FCAC PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K21018-1 | GCU/SCU BYPASS TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K24001-1 | HOIST ADAPTER ASSY - VFSG & ASG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27001-126 | REMOVAL / INSALLATION EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27004-156 | Hoist Equipment R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27008-67 | Sling Equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27009-124 | R/I Equipment Flaperon (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27023-64 | Sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27024-30 | SLING EQUIPM, INB TE FLAP, R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27025-28 | SLING EQUIPM - OUTB TE FLAP, R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27027-175 | SLING EQPT - R/I, INB + OUTB SLATS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27030-1 | COUNTER EQUIPMENT - REVOLUTION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27038-1 | Securing clamp (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27046-15 | LOCK EQPT - ELEVATOR PCU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27047-1 | R/I EQPT - HINGE PANEL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27050-1 | RIGGING EQUIP AILERON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K27050-14 | RIGGING EQT AILERON (CALIBRATION) | 1 | |
| (CALIB) K29001-1 | Adapter Eqpt - EMP R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K29002-78 | R/I EQPMT - RAM AIR TURBINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K32013-24 | Sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K32015-1 | NLG LOWER SEAL EQUIPMENT, R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K32016-1 | TURNBUCKLE, MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K32020-1 | Retainer equipment - MLG/NLG Torsion Link (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K46002-1 | BREAKOUT BOX - FIBER OPTIC (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K47003-1 | Equipment NGS Motor Driven Compressor R/I (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K49002-1 | HOIST EQUIPMENT - ASG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K49004-1 | Hoisting Device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K52002-90 | BARRIER, LOCKING ARM EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K52006-1 | REMOVAL / INSTALLATION DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K52016-1 | SAFETY BARRIER - CARGO DOOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K54003-1 | Sling Equipment - Strut Unload, Engine On Wing (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K55002-45 | LOCK - HORIZONTAL STABILIZER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K55002-46 | EQUIPMENT - LOAD APPLICATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K56001-38 | SLING NO1 & NO2 WINDOWS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K71002-141 | Engine Change Kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K71002-148 | Engine Change Kit - RR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K71002-21 | 6 Ton Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K71006-20 | HOIST EQUIPMENT ENGINE MOUNTS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K71008-37 | SLING EQUIPMENT FAN COWL BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K71009-36 | SLING - FAN COWL, GENX-1B ENG. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K78001-49 | Thrust reverser (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K78002-70 | EQUIPMENT - T/R SLEEVE SLING GENX-1B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K78004-104 | Sling equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K78009-1 | Thrust reverser (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K78009-1 (CALIB) | THRUST REVERSER (CALIBRATION) | 1 | |
| (CALIB) K78011-1 | Hold open equipment - trent 1000 thrust reverser (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K78012-1 | Adapter Genx Bootstrap for cobra (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) K78013-40 | PAD - PROTECTIVE, ANTI-EROSION ANGLE (CALIBRATION) | 1 | |
| (CALIB) K78013-41 | PAD - PROTECTIVE, ANTI-EROSION ANGLE (CALIBRATION) | 1 | |
| (CALIB) KELLER LEO1 | METER PRESSURE (CALIBRATION) | 1 | |
| (CALIB) KEYSIGHT U125B | DIGITAL MULTIMETER (CALIBRATION) | 1 | |
| (CALIB) KIPSREP08 | Fasteners Install Kit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KIT83-008-03 | KIT (CALIBRATION) | 1 | |
| (CALIB) KNHL428J | KEENSEERT TOOL (CALIBRATION) | 1 | |
| (CALIB) KRPI57-8049 | REPAIR KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KRPS53-8061 | REPAIR KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KS6005 | DIGITAL PROTRACTOR (CALIBRATION) | 1 | |
| (CALIB) KSK1194 | TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 143 | Digital Test Set for Gold Crown (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 146 | Flight Director Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 147 | Flight Director Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 149 | Digital Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 150 | Autopilot Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 151 | KFC 200 Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 152 | KG102A/KSG105 Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 153 | KI525/A Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 154 | Flight Control System Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 156 | Antenna Simulator Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 157 | HF SSBT Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 158 | Auto Pilot Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KTS 169 | MST-67A Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) KYORITSU 2009R | CLAMP METER KYORITSU 2009R (CALIBRATION) | 1 | |
| (CALIB) L 240 | Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) L1089A | EXTRACTOR, BOLT-VERTICAL STABIL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) L135M2902101 | FILLING-UNIT HYDRAULIC (CALIBRATION) | 1 | |
| (CALIB) L135M2903101 | BLEEDING UNIT HYD (CALIBRATION) | 1 | |
| (CALIB) LABINO APOLLO 1.0 | RADIOMETER/PHOTOMETER EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) LAG 120B | Audio Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LB20 | PULLER UNIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LB30 | PULLER UNIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LD2M | INCLINOMETER (CALIBRATION) | 1 | |
| (CALIB) LFM 39A | WOW Flutter & Drift Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LG 500 | Mechanical Force Gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LG-010 | Mechanical Force Gauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LI 3 | Inverter Load Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LLA537A204 | TOOL TOOL BACKLASH CHECKING - FLAP S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LLA547A108 | TOOL TOOL BACKLASH CHECKING - FLAP S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LLA547A194 | TOOL TOOL BACKLASH CHECKING - FLAP S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LOR-220 | HIGH RESOLUTION OTDR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LPA20PSTA30 | Twin Laser Particle Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LPS 4 | DC Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LS-100 | LUMNCMTR LUMINANCE METER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LS-160 | LUMINANCE METER (CALIBRATION) | 1 | |
| (CALIB) LT 5 | Communications Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LTCT28960-01 | TEMPRETURE PROBE KIT (CALIBRATION) | 1 | |
| (CALIB) LW 4 | Weather Radar Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LX 3B | Transponder Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) M1 | Milliohm Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) M1-R-KIT | BONDING METER (CALIBRATION) | 1 | |
| (CALIB) M21851 | EXTRACTOR (CALIBRATION) | 1 | |
| (CALIB) M21929 | FIXTURE TENSIONING FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) M21930 | ASSEMBLY FILLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) M21931 | HOISTING HOISTING DEVICE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) M22520-5-01 | CRIMPING TOOL - POSITIONER (CALIBRATION) | 1 | |
| (CALIB) M22520/1-01 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) M22520/2-01 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) M22520/5-01 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) M30B | MINHOIST MINI-HOIST, ALKAN TYPE M030B, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) M81969/1-01 | SACA PIN (CALIBRATION) | 1 | |
| (CALIB) M81969/1-2 | SACA PIN (CALIBRATION) | 1 | |
| (CALIB) M82000879A | TEST PORT UNIVERSAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MA25902A | PROFESSIONAL MEASURING INS; ALMEMO 2590-2A (CALIBRATION) | 1 | |
| (CALIB) MA8120-2 | Aero-Weigh (Digital Display & Load Cell) (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) MA8158-7 | FWD Bootstrap Chain Block (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MA81Z | HYDRAULIC WHEEL CHANGING JACK W/HANDLE (CALIBRATION) | 1 | |
| (CALIB) MA9001 | FISHPOLE SMALL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MACNAUGHT K7 | MACNAUGHT K7 LUBRICATION (CALIBRATION) | 1 | |
| (CALIB) MAGNACHECK | FIELD STRENGHT METER KIT (CALIBRATION) | 1 | |
| (CALIB) MB30 | PULLER UNIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MBBBT100 | ELCHTEST ELCH-TESTER (ELASTICITY LAMINAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MBEU121231-3 | CENTRIFUGE 400V 3 PASE 50 HZ (CALIBRATION) | 1 | |
| (CALIB) MBEU82194-1 | ADU KIT TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) MBH0-20 | PULLER PULLER, UNIT HYRAULIC (2354-001 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MBH0-35 | HYDROFF HYDRAULIC OFFSET - MBH0 PULLER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MC1816 | DEV-APPL,COSMOLINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MCLD90 | CLINOMETER (CALIBRATION) | 1 | |
| (CALIB) MD 1 | Fuel Quantity Gage Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MDD-GMT221 | CRIMPING TOOL (CALIBRATION) | 1 | |
| (CALIB) MDO414 6 | Mixed Signal Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MEGGER MIT410 | MEGGER (CALIBRATION) | 1 | |
| (CALIB) MF11 | DIGITAL CALIPER (CALIBRATION) | 1 | |
| (CALIB) MFJ 815B | HF Peak Reading SWR Wattmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MG 3601 | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MG 3601A | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MG1250 | 3/4IN IMPACT WRENCH (CALIBRATION) | 1 | |
| (CALIB) MH12-003 | WHEEL-BRAKE CHANGER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MIN7 | PLASTIC SHEET SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MIT 420 | MEGGER (CALIBRATION) | 1 | |
| (CALIB) MIT 515 | Insulation Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MIT-20 | DIGITAL VERNIER CALIPER (CALIBRATION) | 1 | |
| (CALIB) MIT400/2 | INSULATION TESTER (CALIBRATION) | 1 | |
| (CALIB) MIT410 | MEGGER TESTER (CALIBRATION) | 2 | |
| (CALIB) MIT415 | INSULATION TESTER (CALIBRATION) | 1 | |
| (CALIB) MIT420 | INSULATION AND CONTINUITY TESTER (CALIBRATION) | 1 | |
| (CALIB) MIT450Z3613 | HEAT SHIELD TENSION TOOL (CALIBRATION) | 1 | |
| (CALIB) MIT65B90361 | TOOL - ROLLER SWAGING, 60B00180-302 BEARING (CALIBRATION) | 1 | |
| (CALIB) MK7ATIS-002 | INFLATOR GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MK7ATIS-002EL-EPRV | KIT, INFLATION TIRE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MK7ATIS-003 | KIT, INFLATION TIRE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MLGT40F01B2AB | TROLLEY MLGT, MAIN LANDING GEAR TROLLEY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MLGT47-002 | Landing gear handling trolley (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MLGT52-001 | Landing Gear Handling Trolley (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MLGTMULTI-1-AA | Landing Gear Handling Trolley (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MLS-800 | MICROPROCESSOR CONTROLLED GROUND STATION SIMULATOR (CALIBRATION) | 1 | |
| (CALIB) MLS800 | MLS Signal Generator Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MLS801 | MLS Signal Generator Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MODEL DPG-108 | DIGITAL PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) MODEL: AB3000 | BATTERY CHARGER CONTROLLER (CALIBRATION) | 1 | |
| (CALIB) MP-20 | PROBE (CALIBRATION) | 1 | |
| (CALIB) MPS-49 | AIR DATA TEST SET (CALIBRATION) | 1 | |
| (CALIB) MPS-50 | AIR DATA TEST SET (CALIBRATION) | 1 | |
| (CALIB) MPS27C/235/295-1 | AIR DATA TEST SET (CALIBRATION) | 1 | |
| (CALIB) MPS27C/235/295-2 | AIR DATA TEST SET (CALIBRATION) | 1 | |
| (CALIB) MPS31C | AIR DATA TEST SET (CALIBRATION) | 1 | |
| (CALIB) MPS34C | AIR DATA TEST SET (CALIBRATION) | 1 | |
| (CALIB) MPS34C-235/295-1 | AIR DATA TEST SET (CALIBRATION) | 1 | |
| (CALIB) MPS35 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MPS38 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MPS43 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MPS43-K1 | AIR DATA TEST SET (CALIBRATION) | 1 | |
| (CALIB) MPS43B-K1 | AIR DATA TEST SET, WITH AN4 STATIC & AN4 PITOT OPTION (CALIBRATION) | 1 | |
| (CALIB) MPS45 | MPS45 - 2 CHANNEL ADTS (CALIBRATION) | 1 | |
| (CALIB) MPSRS | MPSRS REMOTE (CALIBRATION) | 1 | |
| (CALIB) MRC0006507 | EQUIPMENT MOISTURE INDICATOR (COM-2010) (CALIBRATION) | 1 | |
| (CALIB) MRC006507-N | MOISTURE METER (CALIBRATION) | 1 | |
| (CALIB) MRT-250C | WIRE CRIMP PULL TESTER (CALIBRATION) | 1 | |
| (CALIB) MS02-1 | Mechanical Support (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MS02-2 | Mechanical Support (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MS02-3 | Mechanical Support (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MS02-4 | Mechanical Support (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MS09254A | Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MS17985C1629 | BALLPIN (CALIBRATION) | 1 | |
| (CALIB) MS2024A | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MS2034A | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MS2661A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MS2721A | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MS49 | Mechanical Stanchion (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MS87 Series III | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MT-TPS300K | Tank pressurization system (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MTF902-50B | PROBE (CALIBRATION) | 1 | |
| (CALIB) MVIQAP4020 | PROBE, SUBASSEMBLY (CALIBRATION) | 1 | |
| (CALIB) MVIQAP4030 | 04 MM BORESCOPE PROBE (CALIBRATION) | 1 | |
| (CALIB) MVIQAP6130 | VIDEO PROBE (CALIBRATION) | 1 | |
| (CALIB) MVIQCSYS3-CO | MENTOR IQ BORESCOPE HANDSET (CALIBRATION) | 1 | |
| (CALIB) MVIQHP6130 | 06 MM BORESCOPE PROBE (CALIBRATION) | 1 | |
| (CALIB) Model 1 20 | Attenuator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) N04700114 | Chain Hoist (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) N1267770 | IPLEX MX, Portable - 2M (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) N1912A | Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) N2317724 | OLYMPUS VIDEOSCOPE (MODEL IV7435A-2) (CALIBRATION) | 1 | |
| (CALIB) N4950 | SUCTION CUP (CALIBRATION) | 1 | |
| (CALIB) N512A | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) N5230A B C | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) N600D-KIT-KE | NORTEC EDDY CURRENT FLAW DETECTOR (CALIBRATION) | 1 | |
| (CALIB) N9000A | Signal Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) N9344C | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 2000 | NAV/COM Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 2000R | NAV Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 2000R-50 | NAV/COM Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 2000R-70 | NAV/COM Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 2000R-80 | NAV/COM Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 401L | MB/GS/VOR/LOC/COMM Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 402AP | MKR/NAV/COMM Ramp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 402AP 2 | MKR/NAV/COMM Ramp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 402AP 3 | MKR/NAV/COMM Ramp Test Set (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) NAV 750 | VOR/LOC/COMM/GS Bench Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 750A | VOR/LOC/COMM/GS Bench Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 750B | VOR/LOC/COMM/GS Bench Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 750BR | VOR/ILS/COMM/MKR/GS Bench (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV 750C | VOR/LOC/COMM/GS Bench Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV-402AP | VOR/ILS RAMP TESTER; NAV402AP (CALIBRATION) | 1 | |
| (CALIB) NAV-402AP3 | NAV GENERATOR (CALIBRATION) | 2 | |
| (CALIB) NAV2000R-TA | NAV/COM Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NAV402AP | RAMP TESTERS (CALIBRATION) | 1 | |
| (CALIB) NAV402APA100 | RAMP TEST EQPT (VOR/ILS) (CALIBRATION) | 1 | |
| (CALIB) NDT3282 | REFERENCE STANDARD (CALIBRATION) | 2 | |
| (CALIB) NDT3305B | REFERENCE STANDARD (CALIBRATION) | 1 | |
| (CALIB) NL32 | OPTICAL LEVEL (CALIBRATION) | 1 | |
| (CALIB) NLGD18A | DOLLY DOLLY NOSE GEAR HANDLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NLGT05-001 | Landing Gear Handling Trolley (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) NORTEC 600D | FLAW DETECTOR (CALIBRATION) | 1 | |
| (CALIB) NVX-2294-1 | AVCS MAINTENANCE/MASTER USER INTERFACE SOFTWARE (CALIBRATION) | 1 | |
| (CALIB) OB-30 | OXYGEN BOOSTER (CALIBRATION) | 1 | |
| (CALIB) OHM 5KV | CASE TESTER ENGINE PHC (CALIBRATION) | 1 | |
| (CALIB) OHME65B98605-1 | Sling - APU Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) OMEGA-DPGM8001-6 | DIGITAL PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) OMNISCAN-MX2 | SECOND GENERATION 16:64 PHASED ARRAY ACQUISITION MODULE (CALIBRATION) | 1 | |
| (CALIB) OSCILLOSCOPE 2012B | OSCILLISCOPE (CALIBRATION) | 1 | |
| (CALIB) P-B600/5 | SCREWDRIVER 90 DGR .OFFSET FLAT (CALIBRATION) | 1 | |
| (CALIB) P2K-ABF-01 | Data loader, set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) P2K-ABF-02 | PMAT DATA LOADER, PMAT2000 KIT (CALIBRATION) | 1 | |
| (CALIB) P2KABF02 | Data loader, set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) P7-01-0024 | TEST TEST UNIT-TU-14 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) P7-0100224 | TEST SET TU14 (CALIBRATION) | 1 | |
| (CALIB) PA133 | PNEUMATIC PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PB1200.90BL | HAND FILE FINE (CALIBRATION) | 1 | |
| (CALIB) PCE-888 | PORTABLE INFRARED THERMOMETER (CALIBRATION) | 2 | |
| (CALIB) PD2501 | PRW WRENCH (CALIBRATION) | 1 | |
| (CALIB) PF51-002-01 | FISHPOLE HOIST; 500LBS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PF51-003-1 | FISHPOLE HOIST; 500LBS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PF51-003-3 | FISHPOLE HOIST; 500LBS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PF51-009-1 | POWERED FISHPOLE HOIST; 500LBS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PF51-010-1 | PF FISHPOLE HOIST - POWERED, 500LB (CALIBRATION) | 2 | |
| (CALIB) PF51-011- 1 | HOIST FISHPOLE (CALIBRATION) | 1 | |
| (CALIB) PF51-011-01 | FISHPOLE HOIST; 500LBS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PF56201 | HANDPUMP-TOPUP, SCS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PHASEC 2D | EDDY CURRENT TEST SET (CALIBRATION) | 1 | |
| (CALIB) PK30 | PUTTY KNIVE /SCRAPPER (CALIBRATION) | 1 | |
| (CALIB) PK32 | PUTTY KNIVE /SCRAPPER (CALIBRATION) | 1 | |
| (CALIB) PK33 | PUTTY KNIVE /SCRAPPER (CALIBRATION) | 1 | |
| (CALIB) PL303QMD | DC POWER SUPPLY UNIT (CALIBRATION) | 1 | |
| (CALIB) PM6666 | Timer / Counter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PMAT-XS | PMAT XS (CALIBRATION) | 1 | |
| (CALIB) PMAT2000 | PORTABLE MAINTENANCE ACCESS TERMINAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PME65B00110-53 | Handling Dolly (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PPHN01L70DR0001 | CRADLE CRADLE-ENGINE, EA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PPTR01L70CR0001 | TROLLEY TROLLEY - ENGINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PRG002B | UNIT UNIT, PURGE AIR - MULTIPLE CONT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PRG224 | FILLING UNIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PRG301 | A380 AIR MOVER KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PRO 360 | DIGITAL PROTRACTOR (950-317) (CALIBRATION) | 1 | |
| (CALIB) PRO 360(950-3 | DIGITAL PROTRACTOR (CALIBRATION) | 1 | |
| (CALIB) PRO 360(950-317) | DIGITAL PROTRACTOR (CALIBRATION) | 1 | |
| (CALIB) PRO 3600 | Digital Protractor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PS 425 | Pitot Static Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PS 525 | Pitot Static Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSC6-7 | PLASTIC CASE 7" (CALIBRATION) | 1 | |
| (CALIB) PSD-737-2 | Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD-757/767-1 | Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD30 2AF | DC Capacitance Fuel Quantity Test (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD40 1 | AC Capacitance Fuel Quantity Test (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD40-542 | Interface Cable (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD40-555-1 | INTERFACE CABLE TANK (CALIBRATION) | 1 | |
| (CALIB) PSD40-555-2 | INTERFACE CABLE TANK (CALIBRATION) | 1 | |
| (CALIB) PSD60 1 | AC Capacitance Fuel Quantity Test (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD60 1AF, 22 | AC Capacitance Fuel Quantity Test (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD60 2R | AC Capacitance Fuel Quantity Test (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) PSD60-2R | TEST SET - FUEL SYSTEM (CALIBRATION) | 2 | |
| (CALIB) PSD60-503 | Fuel Quantity Test Cable (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD60-504 | Test Cable (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD60-510/511 | Fuel Quantity Interface Cable at Wing Spar/B757/B767 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD60-587 | Tank Breakout Box (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD737-1 | Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD747-2 | Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD90 1C | Capacitance Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD90 1M | Capacitance Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PSD90-1C/61 | AC/DC CAPACITANCE TEST SET (CALIBRATION) | 1 | |
| (CALIB) PSDF30 2 | Fuel Quantity Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PTS-2 | Precision Transfer Standard (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PV050-001 | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PV075B02A | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PV100-100 | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PV100-101 | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PV10005-002 | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PV150-100 | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PV150-101 | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PV165-100 | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PV250-101 | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PV250-102 | Proof load test fixture (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PVTP91-100 | Proof load test fixture (Cobra) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PW36C | 36” EXTERNAL PIPE WRENCH (SNAP ON TOOLS) (CALIBRATION) | 1 | |
| (CALIB) PWA104199 | Gage, Immersion (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA104744 | CART-WATER WASH (CALIBRATION) | 1 | |
| (CALIB) PWA105771 | SLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA105778 | Pedestal (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA105785 | LIFT EYE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA105792 | Support, Adjustable- Engine assembly (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA105794 | Adapter, Support − Engine Assembly, Rear, TEC Left Side (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA105795 | Adapter, Support − Engine Assembly, Rear, TEC Right Side (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA107121 | Lifting Eye; Engine assy (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA107474 | Hydraulic lift (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA111085 | Adapter, Vacuum Check - Engine Assy. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA111414 | Adapter Support. Engine Assy. (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA111529 | FIXTURE, INSTALLATION (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA115185 | TOOL (CALIBRATION) | 1 | |
| (CALIB) PWA115186 | TOOL (CALIBRATION) | 1 | |
| (CALIB) PWA115187 | TOOL (CALIBRATION) | 1 | |
| (CALIB) PWA115188 | TOOL (CALIBRATION) | 1 | |
| (CALIB) PWA115189 | ENGINE ASSEMBLY THRUST LINK PROTECTOR COVER" (CALIBRATION) | 1 | |
| (CALIB) PWA115190 | TOOL (CALIBRATION) | 1 | |
| (CALIB) PWA12116E | PT2 INLET PROBES (CALIBRATION) | 1 | |
| (CALIB) PWA211370 | TOOL-TEC SLING LIFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA211430 | STAND, TRANSPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA29451 | ADAPTER HYDRAULIC PUMP ENGINE VANE CONTROL (EVC) (CALIBRATION) | 1 | |
| (CALIB) PWA76154 | Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA76155 | SLING HANDLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA85465 | PIN RIG (CALIBRATION) | 1 | |
| (CALIB) PWA86069 | RIG PIN (CALIBRATION) | 1 | |
| (CALIB) PWA88000 | LIFTING LIFTING,SLING-THRUST REVERSER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA88004 | SLING SLING, SUPPORT - THRUST REVERSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA88010 | SUPPORT SUPPORT-SAFETY, THRUST REVERSER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA88011 | SUPPORT SUPPORT-SAFETY,PDO ACTUATOR T R (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA88050 | SLING SLING - INTAKE COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA88051 | SLING - FWD FAN COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWA88052 | SLING SLING - AFT FAN COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWC30617 | BRACKET - PRATT (CALIBRATION) | 1 | |
| (CALIB) PWC30618 | BRACKET - PRATT (CALIBRATION) | 1 | |
| (CALIB) PWC31050 | TORQUE MULTIPLIER (CALIBRATION) | 1 | |
| (CALIB) PWC34910-101 | BORESCOPE (CALIBRATION) | 2 | |
| (CALIB) PWC34910-109 | BORESCOPE (CALIBRATION) | 1 | |
| (CALIB) PWC37711 | BOROSCOPE - OBSOLETE S/S BY PWC34910-101 (CALIBRATION) | 1 | |
| (CALIB) PWC45215 | WRENCH KIT (CALIBRATION) | 1 | |
| (CALIB) PWC45215-R-S | TOOL KIT CALIBRATION (CALIBRATION) | 1 | |
| (CALIB) PWC47123 | FUEL MANIFOLD PRESSURE INDICATOR UNIT (CALIBRATION) | 1 | |
| (CALIB) PWC76301 | ADAPTER LEAK TEST (CALIBRATION) | 1 | |
| (CALIB) PWC90086 | FUEL NOZZLE TESTER (CALIBRATION) | 1 | |
| (CALIB) PWTE1 | POTABLE WATER TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) PWU-MB2-HK | ENGINE WASHING TOOL (CALIBRATION) | 1 | |
| (CALIB) PYM20-017 | GAUGE (CALIBRATION) | 1 | |
| (CALIB) PYM20-018 | GAUGE (CALIBRATION) | 1 | |
| (CALIB) PYM22-184 | GAUGE (CALIBRATION) | 1 | |
| (CALIB) Q-RAEIIPGM-24 | GAS MONITOR (CALIBRATION) | 1 | |
| (CALIB) Q-RAEIIPGM-2400P | GAS MONITOR (CALIBRATION) | 1 | |
| (CALIB) Q47449 | INSERTION TOOL (CALIBRATION) | 1 | |
| (CALIB) Q72-3C | DC METER (CALIBRATION) | 1 | |
| (CALIB) Q72-BC | VOLT METER 0-5OV (CALIBRATION) | 1 | |
| (CALIB) Q72-HC | FREQUENCY METER-GPU 350-450HZ (CALIBRATION) | 1 | |
| (CALIB) Q72-R5C | ANALOG VOLT METER (CALIBRATION) | 1 | |
| (CALIB) Q72-RBC | ANALOG VOLT METER 0-250V (CALIBRATION) | 1 | |
| (CALIB) QA03362 | TOOL (CALIBRATION) | 1 | |
| (CALIB) QB18 | TEST SET, STATIC DISC (CALIBRATION) | 1 | |
| (CALIB) QCDTC3250 | DIGITAL TORQUE TESTER (CALIBRATION) | 1 | |
| (CALIB) QD1200A | TORQUE WRENCH 40-200 IN/LBS (CALIBRATION) | 1 | |
| (CALIB) QD1R50 | TORQUE WRENCH (CALIBRATION) | 3 | |
| (CALIB) QD2R1000A | TORQUE WRENCH (CALIBRATION) | 3 | |
| (CALIB) QD2R200 | TORQUE WRENCH 40-200 IN/LBS (CALIBRATION) | 1 | |
| (CALIB) QD3R1600A | 320-1600 IN/IBS TORQUE WRENCH (CALIBRATION) | 2 | |
| (CALIB) QD3R250 | TORQUE METER (CALIBRATION) | 2 | |
| (CALIB) QD3R2500A | 500-2500-IN/IBS TORQUE WRENCH (CALIBRATION) | 3 | |
| (CALIB) QD3R250A | TORQUE WRENCH 50-250FTLB (CALIBRATION) | 2 | |
| (CALIB) QD4R600 | TORQUE METER (CALIBRATION) | 1 | |
| (CALIB) QDR400 | TORQUE METER (CALIBRATION) | 1 | |
| (CALIB) QDR600 | TORQUE METER (CALIBRATION) | 1 | |
| (CALIB) QDRIVER2A | TORQUE WRENCH (CALIBRATION) | 2 | |
| (CALIB) QDRIVER4 | SCREWDRIVER (CALIBRATION) | 3 | |
| (CALIB) QJR117E | TORQUE METER (CALIBRATION) | 2 | |
| (CALIB) R-SPS3010 | POWER SUPPLY (CALIBRATION) | 2 | |
| (CALIB) R10743 | TAIL TRIPOD JACK-15 TONS (CALIBRATION) | 1 | |
| (CALIB) R191703 | N-MALE C-FEMALE ADAPTOR (CALIBRATION) | 1 | |
| (CALIB) R191705 | N-FEMALE C-MALE ADAPTOR (CALIBRATION) | 1 | |
| (CALIB) R1L E2 | Micro-Ohm & Bond Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) R3765 | Network Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) R46384 | CENTERING TOOL (CALIBRATION) | 1 | |
| (CALIB) RA4510K2A0A02 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RA4510K2A0A10 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RA5529K2A0A02 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RA5540K2A0A02 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RA6009-001 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RA7704K2A0E06 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RB40MCAIRBUS001 | Drilling tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RB40MCAIRBUS003 | LR GEAR RIB BORING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RB46-01 | HYDROPNEUMATIC RECEIVER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC2508B1A0A01 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC3513 | Axle Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC3524B1A0A03 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC4509B1A0A10 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC4509B5A0A10 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC4509K4A0A10 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC4509K5A0A03 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC4509K5A0A10 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC5528K4A0A03 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC6008-001 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC6008B2A0A03 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC6008K2A0A06 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC6010B2A0A03 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC7703K4A0A08 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC9002-001 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC9002B2A0A03 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RC9002K4A0A06 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RCFD340 | FILLSET FILL DRAIN DEVICE FOR REMOTE CH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RCLK5C01S010 | RYNGLOK TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RCP2A | MILOMETER KIT (CALIBRATION) | 1 | |
| (CALIB) RCSK8-02S013 | RYNGLOK UNIVERSAL TOOL KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RCWSEA320 | A320 WINDSHIELD EMITTERS KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RCWSP4Z01 | WINDSHIELD RAPID CURING SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RD 301 | Weather Radar Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RD 301A | Weather Radar Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RD-300 | Weather Radar Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RDX 7708BRW | Weather Radar Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RDX 7708CRW | Weather Radar Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RDX 7708R | Weather Radar Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RF 80K | Power Battery Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RF 80M | Power Battery Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RFFLDSPX02 | IDG SERVICE TOOL PUMP (CALIBRATION) | 1 | |
| (CALIB) RFM940RF80-25 | Tire inflation gauge 0-25 bar (0-360 psi) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RGS2000-05 | TCAS Reply Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RGS2000-06 | TCAS Reply Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RGS2000-10 | TCAS Reply Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RGS2000-11 | TCAS Reply Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RGS2000-15 | TCAS Reply Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RGS2000-16 | TCAS Reply Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RGS2000-20 | TCAS Reply Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RGS2000-21 | TCAS Reply Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RH0813A0A0A01 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RH1029A1A0A01 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RH1402-002 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RH1515A1A0A01 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RH1606A1A0A01 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RIN27608397000 | CONTROL CONTROL BOX-SPOILER,VALVE GROUP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RIN28108706000 | TESTBOX-ACT 802VU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RL15.12 | Recovery Axle Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RMA 55B | Multi Mode Receiver (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT028135 | Wrench (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT028159 | SUPPORT/REACTION PLATE KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT029232 | MOUNT - DUMMY, AFT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT029917 | Setting tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT032365-1 | Generator Lifting adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT032369 | Adaptor Plate (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT038756-3 | Fan, Case Access Ladders (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT038761-1 | Platform (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT042712 | Turning Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT046961 | Turning Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT046961-1 | Turning Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT046982 | Lifting Sling BR725 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT046983 | Adapter Front BR725 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT046984 | Adapter Rear BR725 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT047235 | SettingGauge (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT050501-4 | Gearbox Cradle (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT050571-3 | Turning Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT050664 | Parking Trolley (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT054220-1 | Support Plate (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT058139 | STARTER MOTOR CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT058140-1 | FIXTURE - FUEL PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT058140-2 | FIXTURE - FUEL PUMP (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT058143-1 | VFG CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT058143-2 | VFG CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT058144-2 | HYDRAULIC PUMP CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT058149 | Sling - Gearbox (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT058153-1 | EBAS T DUCT REMOVAL TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT058599 | OIL PRESSURE FILL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT060843 | INSPECTION TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT061249 | OIL PUMP CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT061249-1 | Fixture - Oil Pump (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT061786-5 | IMMOBILISER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT062237 | REAR FAN TIP GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT063357 | LONG REACH JACK ADAPTOR PLATE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT063783 | LRU Lifter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT065067 | MEASURING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT066176-1 | IMMOBILISER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT068182 | HYDRAULIC DRAIN TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT069109-1 | Setting Plate (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT070226-1 | Container (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT071379-1 | SPANNER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT071407 | Lifting Sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT075000 | Transport trolley (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT075837-1 | GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT078027 | End Loading Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT078121 | GAUGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT082081 | XWB M41 MAIN BUILD STAND SPACER ( RRT026359 ) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT082331 | Hose (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT083782 | LIFTING ADAPTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT084298 | Sling Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT084300 | Lift Adapter B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT086691 | Adjusting tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT087442-1 | Test tool set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT087442-2 | DRYING KIT POMPE (CALIBRATION) | 1 | |
| (CALIB) RRT087629 | HYDRAULIC PUMP CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT088893-1 | Bolt & Barrel Nut (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT090079 | EEC HEATER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT090413 | HP Turning Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT095945 | Hand Crank Tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT105095 | Spanner (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT106315 | Turning tool (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RRT110718 | Lifter, Gearbox Accessoires (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RS0301A1A1A01 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RS0404A1A0A01 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RS0609A1A1A01 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RS0621A1A1A01 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RS1031 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RS1201B1A1A01 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSA3308A | Real Time Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSA3408A | Real Time Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE 1130 | FIXTURE NOZZLE (CALIBRATION) | 1 | |
| (CALIB) RSE1002 | Cowling Pump (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1003 | SLING SLING - NOSE COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1004 | Sling, Fan Cowl (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1005 | SLING SLING - FAN REVERSER ASSEMBLY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1024 | SLING SLING NOSE COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1025 | SLING SLING FAN COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1026 | Sling, Primary Nozzle (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1027-1 | Accessories Hoist System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1071 | Wrench Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1079 | Hose - Ground Air Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1111 | PUMP PUMP UNIT-HYDRAULIC FAN REVERSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1112 | SLING SLING INLET COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1112W8300-01 | SLING SLING INLET COWL - CE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1113 | SLING SLING-FAN COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1113W8300-01 | SLING SLING-FAN COWL - CE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1133 | Handling Sling (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1206 REV NC | ALIGNMENT TOOL NOSE COWL ENGINE FLANGE (CALIBRATION) | 1 | |
| (CALIB) RSE1235 | SLING SLING - FAN COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE1236 | SLING SLING-INLET COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE3403 | Sling, Mixer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE3404 | SLING SLING-INLET COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE3405 | SLING SLING-FAN COWL (CFM56-5C) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE3415 | HOIST HOIST ASSEMBLY - EXHAUST NOZZLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE3416 | SLING-NOZZLE (CFM56-5C) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE3450 | LIFTING LIFTING,BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE3480 | HYDRAULIC PUMP THRUST REVERSER ACTUATOR, CFM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE3490 | THREADPR THREAD PROTECTOR SET, T-R COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE6404 | Dolly, Inlet Cowl Shop Transportation (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSE6417 | Sling, Fan Cowl Door Lifting (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSIK1 | Protective equipment (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RSR MAS345 | Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT15050-001 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT15050-002 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT4550-001 | AXLE JACK (only testing) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT4550-004 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT4551-001 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT6050-001 | AXLE JACK (only testing) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT6050-002 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT6051-001 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT7750-001 | AXLE JACK (only testing) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT9050-001 | AXLE JACK (only testing) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RT9051-001 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RTA 44D | TUA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RTA075002 | CRADLE CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RTA075005RH | FRAME FRAME LIFTING FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RTEMP8 | INFRARED THERMOMETER (CALIBRATION) | 1 | |
| (CALIB) RTSK8-01-001 | TOOL KIT, AIRCRAFT MAINTENANCE (CALIBRATION) | 1 | |
| (CALIB) RTSK8-02-001 | RYNGLOK KIT (CALIBRATION) | 1 | |
| (CALIB) RTSK8-02-067 | KIT - TOOL RYNGLOK UNIVERSAL (CALIBRATION) | 1 | |
| (CALIB) RVA 36B | TUA Cable (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RW5012 | Wattmeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) RWT 4B | Weather Radar Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S 1403 | Mode S Accessory Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S 1403C | Mode S Accessory Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S 1403DL | Mode S Accessory Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S 1403DL MLD | Mode S Accessory Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S070V1050102 | HELICOPTER SLING (CALIBRATION) | 1 | |
| (CALIB) S088RD | KNIFE (CALIBRATION) | 1 | |
| (CALIB) S0A57N00614 | TOOLKIT TOOLKIT, SOA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S0ATLR57102001B | TOOLKIT TOOLKIT, SOA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S1787CR | ENGINE CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S320J5001101 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S331D | Cable/Antenna Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S487ETT2 | ENGINE CRADLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) S622V1002102 | M.R.H. / M.G.B. SLING (CALIBRATION) | 1 | |
| (CALIB) SA30228 | SPIN-UP TEST SET (CALIBRATION) | 1 | |
| (CALIB) SBE2213 | KIT TOOL-TESTER LINE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SC 063 | Sight Compass (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SC04-100 | OXYGEN SERVICE CART (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SC04-200 | Service Cart (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SC10 | Service Cart (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SC13-009 | Service Cart (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SCA-RC331931 | B737MAX VACUUM DRYING KIT (CALIBRATION) | 1 | |
| (CALIB) SCA65-1AP | Axle Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SCSFD380 | DEVICE DEVICE-FILLING DRAINING,SUPPLEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SCSFD380M1 | DEVICE DEVICE-FILLING DRAINING,SUPPLEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SCSR1 | DEVICE DEVICE - REFILL, SUPPLEMENTAL C (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SCT327 | SAFE T CABLE TOOL 7IN HOSE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SCZ-106 | Sight Compass (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SD12515-1 | TOOL (CALIBRATION) | 1 | |
| (CALIB) SDX 2000 | Transponder Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SFZD-11A | ANTI-COLLISION LIGHT TESTER (CALIBRATION) | 1 | |
| (CALIB) SG140 | SERVICE UNIT OXYGEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG145-002 | TRANSFMR TRANSFORMER, UNIVERSAL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG153-001 | CART, PULL - TRIPOD JACKS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG153-004 | CART, PULL - TRIPOD JACKS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG155-001 | Central control unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG156-002 | RESCUE HOIST WORK STAND (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG177 | Tripod Jack Set (Embarer 170/175/190/195) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG182 | Jack pad lifting device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG224-001 | LOAD LIMITER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG231-001 | Dual rescue hoist work stand (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG251-001 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG464 Cable | Cable (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SG465 | Cable (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SGASA104BR | 4PC HOOK/ASL SET (CALIBRATION) | 1 | |
| (CALIB) SGLASA204CG | LONG MINI PICK SET 4PC GREEN (CALIBRATION) | 1 | |
| (CALIB) SH001 | SERVICING RIG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SI-1404 | Mode S IFF Accessory Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SIC3500-001 | KIT, INFLATION TIRE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SIM530 | TEST SET - RADIO ALTIMETER (CALIBRATION) | 1 | |
| (CALIB) SIMPROX400 | GPWS DATA SIMULATOR (CALIBRATION) | 1 | |
| (CALIB) SJ-210-SPS | SURFACE TESTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SJ210 | SURFACE TESTER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SK2000FIT | Fuel Integrity Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SK2029C221-01 | LOCKING SHAFT TOOLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SK2030C221-01 | LATCHING SHAFT TOOLING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SM705 | DECOMPRESSOR FROM JMP/CFM56/D/4777/C200 ENGINE CLEANOUT TOOL (CALIBRATION) | 1 | |
| (CALIB) SM709 | GAGE 0-100PSI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SMB 100A ww/o Stereo | RF Analog Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SMIG277CR80A | CRADLE CRADLE FOR GE-ENGINE CF6-80A (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SMIQ 03B | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SML03 | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SMT 02 | Signal Generator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SMX 2044 | Digital Multimeter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SPR-001-BOE AIR SOURCE FITTING REFUEL ADAPTER | CALIBRATION (CALIBRATION) | 1 | |
| (CALIB) SR4J540 | OXYGEN REGULATOR HP (CALIBRATION) | 1 | |
| (CALIB) SR4K677 | OXYGEN REGULATOR (CALIBRATION) | 1 | |
| (CALIB) SR5441-90T16200 | TOOLKIT TOOL KIT, HARDNESS TESTING - PY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SR5722-01T00000 | TOOLKIT TOOL KIT, DURABLE - A320 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SR5722-09T00000 | TOOLKIT TOOL KIT, FWD PINTLE BREAKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SR770 | Spectrum Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SRS 203A | Synchro Resolver (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SS 5712 | Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SS-5A | Synchro Standard (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SSL(M)10-58-74MK2 | Tripod Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ST-4000 | STROBE LIGHT TESTER (CALIBRATION) | 1 | |
| (CALIB) ST6760A-1 | ULTRASONIC KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ST8870 | CALIBRATION KIT SHOULD CONTAIN 5 GUIDES ST8870-1, ST8870-4, ST8870-7, ST8870-8, ST8870-9 (CALIBRATION) | 1 | |
| (CALIB) STAL1032 | OPTICAL LEVEL (CALIBRATION) | 1 | |
| (CALIB) STAL332 | NIVEL ÓPTICO (CALIBRATION) | 1 | |
| (CALIB) STD-1279 | MOUNT (CALIBRATION) | 1 | |
| (CALIB) STD-7000 | Interface System Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) STD1114 | AIR SOURCE - REGULATED (CALIBRATION) | 1 | |
| (CALIB) SVT-2000 | VALIDATION TESTER (Part of ST6760A) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SWE8112 | TORQUE MULITIPLIER (CALIBRATION) | 1 | |
| (CALIB) SWE8200 | POWER WRENCH (CALIBRATION) | 1 | |
| (CALIB) SWE8202A | MULTIPLIER, PNEUMATIC (CALIBRATION) | 1 | |
| (CALIB) SWREF1 | STANDARD, REFERNCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Scats II | Scats Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) SlimKIC 2000 | Thermal Profiler (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Squawk Naut I | DME / ATC Trspdr Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Superseder II | Battery Charger/Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Superseder III | Battery Charger/Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 23A | ATC Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 307951 | Universal Pointer/Flag Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 307962 | Universal Pointer/Flag Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 30B | Ramp Test Set (VOR,ILS,MB) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 30D | Ramp Test Set (VOR,ILS,MB) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 36C | NAV/COMM Ramp Bench Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 47C | IFF/TCAN/DME Ramp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 47G | ModeS IFF/TACAN/DME/TCAS Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 47S | XPDR/DME/TCAN Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 47SH | XPDR/DME/TCAN Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 48D | Mode S/AATCRBS/DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 49 | TCAS/XPDR Ramp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 49C | TCAS/XPDR Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 49CA | TCAS/XPDR Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 5 | Aircraft Tensiometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T 60 | Aircraft Tensiometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T-30CM | Ramp Test Set (VOR,ILS,MB) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T-30D | VOR ILS MB RAMP TEST SET INSTRUMENT (CALIBRATION) | 1 | |
| (CALIB) T-49C | TCAS/TRANSPONDER RAMP TEST SET T49C (CALIBRATION) | 1 | |
| (CALIB) T101419 | ALIGNMENT TOOL (CALIBRATION) | 1 | |
| (CALIB) T1200A | Control Display Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1200B | Control Display Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1201 | ADF/ILS DFIU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1202 | HF/VHF DFIU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1202-11 | DFIU to VHF-900 TUA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1202-HFDL753 | Adaptor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1203 | DME/XPDR DFIU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1203-01 | DME Interface TUA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1203-02 | TPR-710A TUA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1203-03 | Radio Altimeter Interface (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1203-09 | CBL TDM-709 W/CFDS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1203-10 | ERT-530 LRA Interface (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1203-11 | DMA-37 RF Adaptor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1204 | RMI/RDMI DFIU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1205 | Control head DFIU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1206 | Satcom DFIU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1207 | GPS/MLS/DFIU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T120X | Fault Memory Dump Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T12X | Fault Memory Dump Unit (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1351960 100000 | RAM AIR TURBINE TESTER (CALIBRATION) | 1 | |
| (CALIB) T1351960100000 | RAM Air Turbine Test (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T1401 | TACAN Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T365 | FLIP THERMAL IMAGER (CALIBRATION) | 1 | |
| (CALIB) T477W | Bonding Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T47NC | Transponder INT/IFF/TCAN/DME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T47NH | Transponder INT/IFF/TCAN/DME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T5-2002-101-00 | Tensiometre (CALIBRATION) (CALIBRATION) | 4 | |
| (CALIB) T5-2002-104-00 | TOOL (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) T5-2004-113-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T5-8002-104B-00 | TENSIOMETER (CALIBRATION) | 2 | |
| (CALIB) T5-8005-110-00 | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T5-8008-106-00 | PACIFIC SCIENTIFIC T5-8008-106-00 BLACK DIAL INDICATING 18 TO 14 & 40-600 LBS CABLE TENSIOMETER (CALIBRATION) | 2 | |
| (CALIB) T50DS002A | DREVEL (CALIBRATION) | 1 | |
| (CALIB) T532 | WIRE STRAINER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T60 1001-C8-1A | TENSIOMETER (CALIBRATION) | 1 | |
| (CALIB) T60-1001-C8-1A | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T60-1001-C9-1A | TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T60-1001C8-1A | TENSIOMETER, CABLE (CALIBRATION) | 1 | |
| (CALIB) T7055-01162-041 | VHMU BREAKOUT BOX (CALIBRATION) | 1 | |
| (CALIB) T792992055000000H | Sling equipment MLG and NLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T792994004000000H | Nose wheel steering angle measurement device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T792995001000000H | Angle measuring device set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T792996000000000H | Bootstrap (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T792999401000000H | UNIVERSAL LIFTING BEAM 1 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T792999440000000H | Equipment R/I Stabilisator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T7K220082D166 | GAUGE GAUGE, PYLON ACCEPTANCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) T89855. | GAUGE (CALIBRATION) | 1 | |
| (CALIB) TA 900 | 4 Digit Angle Position Indicator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TAP 200 | Anti-Radiation Coupler (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TAS 220 | Two Channel Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TAS 250 | Two Channel Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TAS 465 | Two Channel Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TAS 475 | Four Channel Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TAS 485 | Four Channel Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TB-2100 | ATC, DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TC0150 | COAXIAL TERMINATION DUMMY LOAD DC (CALIBRATION) | 1 | |
| (CALIB) TCAS201 | TCAS Ramp Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TCAS201-2 | TCAS TEST SET (CALIBRATION) | 1 | |
| (CALIB) TCR 1 | Phase Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TD5-02000K | DYNAMOMETR (CALIBRATION) | 3 | |
| (CALIB) TDR 1502 | Time Domain Reflectometer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TDS 2002B | Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TDS 2012B | Two Channel Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TDS 2014 | Four Channel Digital Real Time (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TDS 2024 | Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TDS 210 | Digital Real Time Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TDS 220 | Digital Real Time Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TDS 3000 Series | Digital Phosphor Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TDS 3054B | DIGITAL PHOSPHOR OSCILLOSCOPE TEKTRONIX (CALIBRATION) | 1 | |
| (CALIB) TDS 320 | Two Channel Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TDS 460 | Four Channel Digital Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TDS 540C | Digital Oscilloscopes (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TE12A | SNAPON DIAL TORQUE WRENCH(TE12A) 0 ~ 150INLB (CALIBRATION) | 1 | |
| (CALIB) TE50A | 0.600 IN/IBS TORQOMETER (CALIBRATION) | 2 | |
| (CALIB) TE50FUA | TOOL (CALIBRATION) | 1 | |
| (CALIB) TEK-SWREF1 | COMPOSITE STANDARD (CALIBRATION) | 1 | |
| (CALIB) TEST123 | TEST123 (CALIBRATION) | 1 | |
| (CALIB) TESTO 510 | MANOMETER (CALIBRATION) | 1 | |
| (CALIB) TFC20-0003-2 | SQUIB TESTER (CALIBRATION) | 1 | |
| (CALIB) TH100-C | TAP TESTER - NDT EQUIPMENT (CALIBRATION) | 1 | |
| (CALIB) THD1032L | ALCOA SCREW THREAD INSERT INSERTER (CALIBRATION) | 1 | |
| (CALIB) THD524L | ALCOA SCREW THREAD INSERT INSERTER (CALIBRATION) | 1 | |
| (CALIB) THMET06-00-00 | TRAILER< ENGINE GROUND HANDLING (CALIBRATION) | 1 | |
| (CALIB) THSA330-340TB01 | TOOLBOX TOOL BOX (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) THT15101 | WIRE STRIPPER (CALIBRATION) | 1 | |
| (CALIB) THXHD1032L | ALCOA SCREW THREAD INSERT INSERTER (CALIBRATION) | 1 | |
| (CALIB) THXHD524L | ALCOA SCREW THREAD INSERT INSERTER (CALIBRATION) | 1 | |
| (CALIB) TI1000GPU 24 INT | Battery Power Supply (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TJSL0E03502A13 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TJSL1E01001A13 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TJSL1E03501A13 | TRIPOD JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TL0178G009 | MAKILA 2-DECU SOFTWARE INTERFACE (CALIBRATION) | 1 | |
| (CALIB) TLA5203 | Logic Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TM-305U | TEMPERATURE DATA LOGGER (CALIBRATION) | 1 | |
| (CALIB) TM0104G012 | ENGINE VIBRATION CONTROL (CALIBRATION) | 1 | |
| (CALIB) TM0161G006 | TEST SET (CALIBRATION) | 1 | |
| (CALIB) TM1609G001 | POCKET PRESSURE SWITCH AEROVAL (CALIBRATION) | 1 | |
| (CALIB) TM1775G001 | GUIDE (CALIBRATION) | 1 | |
| (CALIB) TM2058G001 | CHECKING TOOL (CALIBRATION) | 1 | |
| (CALIB) TM2295G001 | STARTER CONDITIONING (CALIBRATION) | 1 | |
| (CALIB) TM2299G001 | REGULATION HARNESS CONDITIONING (CALIBRATION) | 1 | |
| (CALIB) TM2300G001 | CONTROL AND MONITORING HARNESS CONDITIONING (CALIBRATION) | 1 | |
| (CALIB) TM2303G001 | THERMOCOUPLE HARNESS CONDITIONING (CALIBRATION) | 1 | |
| (CALIB) TM3139G001 | SEAL EXTRACTOR (CALIBRATION) | 1 | |
| (CALIB) TM3406G001 | EROSION MASK (CALIBRATION) | 1 | |
| (CALIB) TM4865G001 | ENGINE VIBRATION TOOKIT (CALIBRATION) | 1 | |
| (CALIB) TM5509G001 | ECU DIAGNOSTIC TOOL (CALIBRATION) | 1 | |
| (CALIB) TM6733G001 | EROSION MASK (CALIBRATION) | 1 | |
| (CALIB) TMHAE20-00-00 | Wireless wighing load cells KI (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHAE50-00-00 | WEIGHING LOAD CELLS KIT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHAS09-00-00 | AUXIJACK AUXILIARY JACK (A320) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHAS09-10-00 | JACK JACK, AUXILIARY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHAS10-00-00 | JACK JACK AUXILIARY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHAS10-10-00 | JACK AUXILIARY JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHAS10-18-01 | EXTENSION JACK 50 CM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHAS13-00-00 | Safety Stay (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHAS20-10-00 | STAY, SAFETY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHBS02-00-00(98S71003000002 | FIXTURE ENG/ PROP R/I (CALIBRATION) | 1 | |
| (CALIB) TMHCP09-10-00 | Wheel Change Axle Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHCP18-00-00 | Axle Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHCR17-00-00 | AXLE JACK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHCT02-00-00 | Alligator typ, optional (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHDI23-00-00 | CROSS BEAM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHEC11-00-00 | CRADLE ENGINE (CALIBRATION) | 1 | |
| (CALIB) TMHEC39-00-00 | CRADLE, ENGINE-PW6000 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHET06-00-00 | CFM565 (CALIBRATION) | 1 | |
| (CALIB) TMHGA42-00-00 | TEST EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHGAC17-20-00 | Hand pump, Cowl opening (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHSD09-60-00 | V2500 R/I IDG 772292 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHSD36-10-00 | IDG R/I TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHSD36-20-00 | Generator replacement device (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHTR19-10-00 | ATR42/72 NOSE TRIPOD JACK (CALIBRATION) | 1 | |
| (CALIB) TMHTR20-50-00 | ATR42/72 WING TRIPOD JACK (CALIBRATION) | 1 | |
| (CALIB) TMHTR29-50-00 | Tripod Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHTR63-00-00 | Tripod Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMHTR95-00-00 | Tripod Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TMX-400 | PC SOFTWARE: CEC600 (CALIBRATION) | 1 | |
| (CALIB) TMX1 | 1/4DR 1-1/4IN KNR EXT (CALIBRATION) | 1 | |
| (CALIB) TMXK2 | 1/4DR 2IN KNR EXT (CALIBRATION) | 1 | |
| (CALIB) TMXK3 | 1/4DR 3IN KNR EXT (CALIBRATION) | 1 | |
| (CALIB) TMXK4 | 1/4DR 4IN KNR EXT (CALIBRATION) | 1 | |
| (CALIB) TMXK60 | 1/4DR 6IN KNR EXT (CALIBRATION) | 1 | |
| (CALIB) TMXK80 | 1/4DR 8IN KNR EXT (CALIBRATION) | 1 | |
| (CALIB) TO4853 | HYDROSTATIC TEST MACHINE (CALIBRATION) | 1 | |
| (CALIB) TORCOFIX-SE | 75-400NM TORQUE WRENCH (CALIBRATION) | 1 | |
| (CALIB) TOWA320-C | TOWBAR A318/A319/A320/A321 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TOWB737-C | TOWBAR HYDRO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TOWB747-L-6 | Towbar (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TOWB757-C | TOWBAR BOEING 757 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TOWB787-C | TOWBAR 787 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TOWE170-C-1+8 | TOWBAR FLY AWAY E190 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TOWE170-C-4 | TOWBAR EMBRAER 170/175/190/195 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TOWNH90-L-006 | Towbar (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TPAA2B0A0A0A0 | Lifting adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TPAO1A0A | Inclination sensor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TPS 2012B | Oscilloscope (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TPT 81A | TCAS Interface Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TQTP101 | TORQOMETER TEST RIG (0-1200 LB.IN.) (CALIBRATION) | 1 | |
| (CALIB) TQTP50 | TORQOMETER TEST RIG (0-600 LB.IN.) (CALIBRATION) | 1 | |
| (CALIB) TR 210 | XPDR/TIS/ADS-B/DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TR 211 | DME/ATC/MODES/ADSB/TIS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TR 220 | TCAS/DME/ATC Mode S/ADS-B (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TR-220 | MULTI-FUNCTION TEST SET (MANUFACTURER: TEL INSTRUMENT ELECTRONICS CORP.) (CALIBRATION) | 1 | |
| (CALIB) TR-36 | NAV/COMM/ELT/EPIRB Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TR102-60 | DEVICE-ZERO DEGREE, RUDDER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TR31-101 | PROTRCTR PROTRACTOR - CONTROL SURFACE (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) TR60-1 | RIGMASTE RIGMASTER SYSTEM-FLIGHT CONTROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TRSV01F71AC | BRACE BRACE-FAN COWL HOLD OPEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TRSV01F78AH | ROD ROD-T R HOLD OPEN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TS 200 | ULTRASONIC TESTER (CALIBRATION) | 1 | |
| (CALIB) TS-4463/P | Pitot Static Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TS-4508 | Air Data Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TS-500 | ULTRASONIC TEST SET (CALIBRATION) | 1 | |
| (CALIB) TS200 | Ultrasonic test set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TS25-BAS1-KIT | BATTERY CHARGER ANALYZER MODEL TS25 MK II (CALIBRATION) | 1 | |
| (CALIB) TS3395 | Transponder/DME Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TS500 | Ultrasonic test set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TSA0018 | EXTRACTING TOOL – HI LOK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TSP-3 | ALMEN CACE (CALIBRATION) | 1 | |
| (CALIB) TT-1000 | Temperature Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TT-1000A | Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TT-1200 | Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TT-1200A | Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TT1000A | DIGITAL TURBINE TEMPERATURE TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TT1200A | TURBINE TEMPERATURE TEST SET (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TTA 100A | TCAS Interface Test Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TTR-920 | TCAS Receiver/Transmitter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TTU 68 E | Fuel Quantity Gage Testers (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TU 14 | Battery Tester (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TU14 | BATTERY TESTER (CALIBRATION) | 1 | |
| (CALIB) TU185A | Mode Annunciator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA220 | Flight Control Computer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA221 | Mode Selector (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA222 | Air Data Computer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA270 | Servo Actuator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA297C | Altitude/Vert Speed Select (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA315A | Mode Annunciator (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA321 | Mode Selector (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA419 | Annunciator Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA420 | Flight Control Computer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA430 | Gyro Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA432 | Autopilot Monitor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA434 | Rudder Boost (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA435 | Trim Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA436 | Trim Adapter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA440 | Autopilot Controller (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA441 | HDG/CRS Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA442 | HDG/CRS Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA446 | Mode Select Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA447 | Mode Select Panel (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TUA470 | Servo Selector (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) TW1190-300 | Wheel Change Dolly (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) Triple Beam | Scale (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) U0787001-500 | BOOTSTRAP,TMH BS 01-FOR A300 AN (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) U125B | DIGITAL MULTIMETER (CALIBRATION) | 2 | |
| (CALIB) U21828010 | EXTRACTR EXTRACTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) U21829 | FIXTURE FIXTURE - STRESSING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) U21842000 | Extractor (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) U21895200 | HOISTING EQUIPMENT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) U8100125 | OMNISCAN POUR NTM 57-29-07 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) U8330633 | UNIT UNIT-SEARCH (10L32A1) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) U8403115 | ULTRASONIC FLAW DETECTOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) U8775335 | A320 NDT 572907 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) UA7376-001 | AVIONICS TOOL KIT (CALIBRATION) | 1 | |
| (CALIB) UB7050 | HYDRAULIC TIGHTENING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) UB7154 | HYDRAULIC TIGHTENING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) UNIV-20-40-BA | Manual and Automatic Static Testing Equipment for Aircraft Applications (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) UNIV20-40ATR | OUTFLOW VALVE TEST SET (CALIBRATION) | 1 | |
| (CALIB) UP350 | Audio Analyzer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) UP510S | Hydraulic Jack (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) USMGO | OULTRASONIC (CALIBRATION) | 1 | |
| (CALIB) USN58L | ULTRASONIC FLAW DETECTOR (CALIBRATION) | 1 | |
| (CALIB) UT-1560 | TAY / SPEY TEST TOOL (CALIBRATION) | 1 | |
| (CALIB) UT1523 | TORQUE MOTOR DRIVE VSV (TRENT 700) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) UT1524 | EE Cable (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) UT1560 | Tay / Spey Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) UT1560-1 | Tay / Spey Test Set (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) UT2000 | Tap Tester (CALIBRATION) (CALIBRATION) | 2 | |
| (CALIB) UT2011 | Trent XWB Data Entry Plug Programmer (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) V0130K | CRIMPING HEAD (CALIBRATION) | 1 | |
| (CALIB) VIPER 4040 | FAN TRIM BALANCE ANALYZER (CALIBRATION) | 1 | |
| (CALIB) VIPER4040 | ANALYZER (CALIBRATION) | 1 | |
| (CALIB) VIT-11-1.5 TON | LEVER HOIST (CALIBRATION) | 1 | |
| (CALIB) VIT-II-1.5 TON | LEVER HOIST (CALIBRATION) | 1 | |
| (CALIB) VITREX-V73 | AC/DC/IR HIPOT TESTER (CALIBRATION) | 1 | |
| (CALIB) VL500Y000000000 | DEVICE - ADJ, RDNG LGHTS (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) VT-429 | TX/RX Card (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WA22 (Pneumatic) | Crimper (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WC22DU-5-22 | TOOL (CALIBRATION) | 1 | |
| (CALIB) WK-40-1360 | COMPASS - INSTRUMENTS SIGHTING 0-36 (CALIBRATION) | 1 | |
| (CALIB) WK013-002 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WK014-002 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WK016 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WK016-001 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WK017 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WK018-001 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WK018-002 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WK019-001 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WK019-002 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WK031-001 | Weighing System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WKJ03001-001 | WEIGHING SYSTEM (300 KN) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WKJ05501-001 | WEIGHING SYSTEM (550 KN) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WKJ11001-001 | WEIGHING SYSTEM (1100 KN) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WLCA1 | Waste line cleaning trolley (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WP-632 | WOODPECKER (CALIBRATION) | 1 | |
| (CALIB) WP-632AM | WOODPECKER TAP TEST (CALIBRATION) | 1 | |
| (CALIB) WSS4 | WATER SEPERATION SYSTEM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WT440 | CRIMPING TOOL & DIE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) WTA500 | HYDRAULIC WHEEL REMOVAL TROLLEY (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3060020004 | QUICK DRILL SLEEVES 19,05MM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3060020005 | QUICK DRILL SLEEVES 15,88mm (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3060020006 | QUICK DRILL SLEEVES 9,53 MM (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3060021000 | REMOVABLE DRILL PLATE 1 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3060022000 | REMOVABLE DRILL PLATE 2 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3070021000 | REMOVABLE DRILL PLATE 1 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X3070022000 | REMOVABLE DRILL PLATE 2 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) X532B | Frequency Meter (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) XK15 | OVEN OVEN,INCLUDING RECORDER 4103C (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) XP-2000 | RADIOMETER - PHOTOMETER (CALIBRATION) | 1 | |
| (CALIB) XP2I | DIGITAL PRESS.GAGE (CALIBRATION) | 1 | |
| (CALIB) XR-100 | DIGITAL LIGHTMETER KIT (CALIBRATION) | 1 | |
| (CALIB) XTVTX/493 | FEELER GAGE (CALIBRATION) | 1 | |
| (CALIB) XYJS-38B | TESTER FOR MFD (CALIBRATION) | 1 | |
| (CALIB) Y-60A1 | PRESSURE GAUGE (CALIBRATION) | 1 | |
| (CALIB) Y-7 AC/DC | MAGNACLUX AC/DC MAGNETIC YOKE (CALIBRATION) | 1 | |
| (CALIB) Y8100 | DC/AC Current Probe (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) YV68A110 | DATALOAD PORTABLE DATA LOADER (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) ZOGLAB MINI-T | TEMPERATURE DATA LOGGER (CALIBRATION) | 1 | |
| (CALIB) i1010 | Current Probe (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 110-0430-100-02 | TEST SET - RADIO ALTIMETER (CALIBRATION) | 1 | |
| (CALIB) КПРВ-5 | RADIO ALTIMETER TESTER (CALIBRATION) | 1 | |
| (CALIB) П12-МК | HF RT TEST SET (CALIBRATION) | 1 | |
| (CALIB)02-7854C0110 | AXLE JACK, NLG/MLG CALIBRATION CALIBRATION | 1 | |
| (CALIB)2C6983P08 | THRUST REVERSER OPENING PUMP CALIBRATION | 1 | |
| (CALIB)351-3000_12GSE | T/R MANUAL HYDRAULIC OPENING SY CALIBRATION CAL | 1 | |
| (CALIB)9092-016 | WHEEL AND BRAKE DOLLY CALIBRATION CALIBRATION | 1 | |
| (CALIB)98D7830H027-000 | PUMP HAND PUMP-THRUST REVERSER ACTUA CALIBRATIO | 1 | |
| (CALIB)98K7830H023-000 | THRUST REVERSER OPEN PUMP CALIBRATION CALIBRATI | 1 | |
| (CALIB)98N7830H013-000 | THRUST REVERSER OPEN PUMP CALIBRATION CALIBRATI | 1 | |
| (CALIB)ADSE650 | ADSE 650 PITOT-STATIC (CALIBRATION) | 2 | |
| (CALIB)ADTS552F | DRUCK AIR DATA TEST SET CALIBRATION | 5 | |
| (CALIB)APV7820-01-0G | HANDPUMP HAND PUMP - THRUST REVERSER COW CALIBRAT | 1 | |
| (CALIB)B78009-26 | THRUST REVERSER LOCKING (CALIBRATION) | 2 | |
| (CALIB)C27050-82 | HANDLING EQUIPMENT - REMOVAL/INSTALLATION, STABILIZER JACKSCREW (CALIBRATION) | 1 | |
| (CALIB)HIX4001 | PUMP PUMP-ACTUATOR, FAN REVERSER CALIBRATION | 1 | |
| (CALIB)HU82381 | HAND PUMP – TRUST REVERSER CALIBRATION CALIBRAT | 1 | |
| (CALIB)IAE1N20009 | PUMP PUMP HYDRAULIC UNIT-REVERSER C- CALIBRATIO | 1 | |
| (CALIB)K71009-36 | SLING - FAN COWL, GENX-1B ENG. CALIBRATION CALI | 1 | |
| (CALIB)K78002-70 | EQUIPMENT - T/R SLEEVE SLING GENX-1B CALIBRATION | 1 | |
| (CALIB)RSE1111 | PUMP PUMP UNIT-HYDRAULIC FAN REVERSE CALIBRATIO | 1 | |
| -CALIBRATION | CALIBRATION CERTIFICATE WITHOUT READINGS | 2 | |
| -Calibration | Calibration Certificate Without Readings | 2 | |
| -Calibration-Plus | Certificate of Calibration with Readings | 2 | |
| 0 PPM | CALIBRATING OIL STANDARD 2 | 1 | |
| 0000020030 | SCREW,CALIBRATED | 1 | |
| 0000020080 | CALIBRATED SCREW | 1 | |
| 0000021850 | SCREW,CALIBRATED | 1 | |
| 001U532A5100000 | DORNIER 328/328 JET SE.4.48A CALIBRATION STANDARD Part 4 53-21-23 Page 11 Figure 407 Includes Test Report and Certificate of Conformance. | 1 | |
| 005M133 | DIGITAL AMMETER CALIBRATION KIT | 2 | |
| 0061R14038 | CAB CALIBRATION CONSOLE | 1 | |
| 01-51-2353 | (CALIBRATED CYLINDER FOR HIDROTEST BENCH) | 1 | |
| 05384 | CALIBRATION BLOCK | 1 | |
| 020119 | CALIBRATION TEST | 1 | |
| 020120 | CALIBIRATION SOFTWARE | 1 | |
| 026T018B | CALIBRATION STANDARD FOR YOKE | 1 | |
| 0397-01-UC | TRA ANTI JAMMING TEST CALIBRATION | 1 | |
| 0622-19857-02 | (TEST SET VALVE ACTUATING (CALIBRABLE) | 5 | |
| 06398-500 | CALIBRATION HARNESS | 1 | |
| 069980 | Calibration Wheel 1" (1/4 Male Sq Drive) | 1 | |
| 0426695 | CALIBRATION BLOCK | 1 | |
| 0000520350 | SCREW,CALIBRATED | 1 | |
| 0000520660 | CALIBRATED SCREW | 1 | |
| 05721845 | TESTO 184-H1 INCL. CALIBRATION 21C | 1 | |
| 0292120690 | CALIBRATED SCREW | 1 | |
| 0319110210 | BOLT,CALIBRATED | 1 | |
| 0322270310 | BOLT, CALIBRATED | 1 | |
| 0390210490 | CALIBRATED SCREW | 1 | |
| 07-8063-6000 | TESTER FUEL CALIBRATION | 1 | |
| 0U142779 | GAGE-CALIBRATION | 1 | |
| 0U145920 | TOOL TOOL-MANUAL CRANKING STOP,THS A (CALIBRATION) | 24 | |
| 0U190427 | LOAD JACK CALIBRATION TOOL | 1 | |
| 1,2 1,4 DNOM | CALIBRATION KEY | 1 | |
| 1. 5 STEP BLOCK | FOR THICKNESS AND LINEARITY CALIBRATION OF THIN MATERIALS-1018 STEEL, NICKEL PLATED | 1 | |
| 10 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 10-0108-00 | CALIBRATION BLOCK | 1 | |
| 10-0109-00 | CALIBRATION BLOCK | 2 | |
| 10-0120-00 | CALIBRATION BLOCK | 1 | |
| 10-0121-00 | CALIBRATION BLOCK | 1 | |
| 10-05357 | BARFIELD SIGHT CALIBRATION COMPASS | 1 | |
| 10-100-1773 | TACHOMETER OPTICAL PHOTOTACH ACCESSORIE REQUIRED FOR EC 145 TOOL MUST BE DELIVERED WITH RECENT CALIBRATION. | 1 | |
| 10-300-0001 | PRINTED CALIBRATION & MAINTENANCE GUIDE (ENGLISH) | 1 | |
| 10/3641C1 | FISHPOLE HOIST KIT (CALIBRATION) | 1 | |
| 100 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 100-400 C° | TERMOMETRO CARATULA 100-400 C° (CALIBRABLE) | 1 | |
| 1000-1 | STALL WARNING/SIGNAL SUMMIT UNIT CALIBRATION KIT | 1 | |
| 1000005-005 | CTS-700 SELCAL/ATSCALL TEST (CALIBRATION | 6 | |
| 100058 | SPRING TESTER (CALIBRABLE) | 1 | |
| 10012-042 | CALIBRATION/MARGINALIZATION UNIT (CAL STICK,DJ) | 1 | |
| 100561-1003 | CALIBRATED VELOCITY TRANSDUCER ASSEMBLY | 1 | |
| 10082A | SMALL TEST BENCH FOR CALIBRATION OF TYPE 721 | 1 | |
| 1009A | GAUGE 0-300 PSI STEM MTG 1/4 NPT 2 1/2 DIA+CERTFIC.CALIBR. | 1 | |
| 101-000000/934 | TORQUE SYSTEM CALIBRATION | 3 | |
| 101-00185 | Pitot Static Calibrator | 1 | |
| 101-00185-465 | CALIBRATION - PITOT STATIC | 7 | |
| 101-00212 | Portable Pressure Calibrator | 9 | |
| 101-380091-1/935 | CALIBRATION ADAPTER TEST BOX (MEGGITT) | 1 | |
| 101-380091-2/939 | CALIBRATION ADAPTER | 2 | |
| 101-5HJ-NAV | IGNITER CIRCUIT TESTER, INCLUDES TESTER, CALIBRATION RESISTORS (SET INCLUDES THE FOLLOWING : 18 OHM, | 4 | |
| 1037BJ | Calibration Standard, TO 1C-130J-36 20-40-00 PG31:FIG21 | 1 | |
| 104-136 | MICROMETRO EXTERIOR (150-300 MM) (CALIBRABLE) | 1 | |
| 104-136A | MICROMETRO EXTERIOR (150-300 MM) (CALIBRABLE) | 1 | |
| 1040C | PANEL METER CALIBRATOR | 1 | |
| 106P12 | CALIBRATION BLOCK (HOCKING) | 1 | |
| 126 | Surface Crack Calibration Block | 7 | |
| 186 | CALIBRATION BLOCK | 1 | |
| 189 | Calibration Block | 7 | |
| 194 | Calibration Block | 9 | |
| 1051 | Calibration Block | 1 | |
| 1052 | Calibration Block | 1 | |
| 1053 | Calibration Block | 1 | |
| 1054 | Calibration Block | 2 | |
| 1077 | Calibration Block | 1 | |
| 1300 | CALIBRE DIGITAL 150MM | 3 | |
| 10471 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 10499 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 109-3630-01-1 | ENGINE AND MAIN GEARBOX CALIBRATION TOOL | 1 | |
| 109-3630-02-103 | ENGINE TO RADIATOR CALIBRATION TOOL | 1 | |
| 10C1043G04 | ENGINE LIFTING BEAM, CF34-10E (CALIBRATION) | 3 | |
| 10K | WEIGHT 10KG (PATRON CALIBRABLE) | 1 | |
| 10STEP-IA | CALIBRATION BLOCK - 7075-T6 | 1 | |
| 11 (901-4819A) | CALIBRATOR FOR BALANCER/ANALYZERS | 1 | |
| 1704 | EDDY CURRENT CALIBRATION BLOCK | 6 | |
| 12890 | CALIBRATOR, LEVEL SOUND PRESSURE( | 5 | |
| 17025 | RULER CALIBRATOR- STAND ALONE LCD MICROSCOPE ( LENGTH-2 METERS; 80 INCH) | 1 | |
| 105645 | 20 GAUSS CALIBRATED INDICATOR | 5 | |
| 112799 | 112799;IFF-7300S 1 Yr Extended HW Warranty + Certified Calibrations | 1 | |
| 131387 | EDDY CURRENT CALIBRATION TEST BLOCK | 1 | |
| 138313 | 138313;CALFB8800 8800 Initial Factory Calibration Certificate; ISO 9001 | 1 | |
| 141685 | 141685;IFF-7300S-50 1 Yr Extended HW Warranty + Certified Calibrations | 1 | |
| 141686 | 141686;IFF-7300S-50 3 Yr Extended HW Warranty + Certified Calibrations | 1 | |
| 146040 | PENETRANT SYSTEM MONITOR 146040 PSM-5 PANEL SHERWIN PSM 5 CALIBER | 1 | |
| 149279 | DAC Calibration Block (MS) | 1 | |
| 149342 | PA Calibration Block (MS) | 1 | |
| 175067 | CALIBRATED FUNCTIONAL GAGE | 1 | |
| 1027421 | CALIBRATION BLOCK | 1 | |
| 1100114 | CALIBRATION BLOCK (2-164-551) NFE | 1 | |
| 102520001 | CRP Calibration Sample for IrNDT | 1 | |
| 1108-150 | CALIBRE PIE DE REY 0-150 MM (0.01 MM) | 3 | |
| 113-226-000 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 115-130-007 | ULTRASONIC SEARCH UNIT PHASED ARRAY (CALIBRATION) | 1 | |
| 1159SST261 | CALIBRATION STANDARD (NDT) | 1 | |
| 1159WM20026-NDT-1 | 1159WM20026-NDT-1 FAIL-SAFE CHANNEL CALIBRATION ESTÁNDAR | 1 | |
| 1159WM20109-NDT-1 | SPLICE FITTING CALIBRATION STANDARD | 1 | |
| 117-2 | SMOKE TEST BENCH/CALIBRATION CHAMBER | 4 | |
| 11A | Calibrator for Balancer/Analyzers | 1 | |
| 11B | Calibrator Model 11B Calibrator for balancers | 1 | |
| 120-45296-001 | CALIBRATION TEST STANDARD | 1 | |
| 120-45297-001 | CALIBRATION TEST STANDARD | 1 | |
| 120-47898-001 | CALIBRATION TEST STANDARD | 1 | |
| 120-47899-001 | CALIBRATION TEST STANDARD | 1 | |
| 120-47998-001 | CALIBRATION TEST STANDARD | 1 | |
| 120-47999-001 | CALIBRATION TEST STANDARD | 1 | |
| 120DSP-FRR | 120DSP-FRR;Fixed Rate Repair and Calibration of 120 DSP | 1 | |
| 1211-8 (CALIBRATION) | MANOMETER (CALIBRATION CERT) | 1 | |
| 121666-010 | calibration cable | 4 | |
| 12245-004-001 | ULTRASONIC CALIBRATION STANDARD, MIDSPAR | 1 | |
| 12245-011-001 | ULTRASONIC CALIB.STANDARD LEAR 45 NTM 57-30-05 | 1 | |
| 12310/5099 | DENSITY TABLET CALIBRATED 4 STEP CHECK TABLET | 1 | |
| 12345-040-001 | CALIBRATION TEST SET | 1 | |
| 12345-045-001 | RUDDER CALIBRATION FIXTURE | 2 | |
| 12345-045-001 | RUDDER CALIBRATION PLATE | 2 | |
| 12445-002-003 | ULTRASONIC CALIBRATION TEST, MAIN LANDING GEAR | 3 | |
| 12445-002-004 | TOOL-ULTRASONIC CALIBRATION STANDARD | 1 | |
| 127-0-032 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-0-040 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-0-063 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-XXX | Corrosion reference standard Calibration Block | 1 | |
| 12AAA787 | Mitutoyo 12AAA787 Block for Calibrating Probe Diameter | 1 | |
| 12BAK700 | SURFTEST SJ-210 CALIBRATION STAGE | 1 | |
| 130-380042-1/935 | CALIBRATION ADAPTER TEST BOX | 2 | |
| 130-380042-4/934 | CALIBRATION ADPT. TEST BOX (MEGGITT) L MAN-350MM ATA 77-00-00 | 1 | |
| 130-380091-2/939 | CALIBRATION ADAPTER SUPPLY HOSES | 1 | |
| 1324A (CALIB) | HANDLING HANDLING TOOL (CALIBRATION) | 3 | |
| 133-360074-1/810 | AOA CALIBRATION PROTRACTOR | 3 | |
| 135-3605-666 | FEELER GAUGE,TRACKBALL ADJUSTMENT CALIBRADOR DE FOLGA DO PAINEL DE CONTROLE | 1 | |
| 135m-11 | strobex w/ vibrex calibrator | 6 | |
| 14-6807-6011 | GAUGE TIRE PRESSURE (MANÔMETRO CALIBRADOR DE PNEU) | 19 | |
| 145-44131-001 | Calibration Standard, Embraer 145, AL 7075-T6 | 6 | |
| 145-44131-003 | Calibration Standard, Embraer 135-145 E57-26-00-250-813C-1:PG4 FIG649 - 15-5PH | 3 | |
| 145-44131-005 | Calibration Standard, Embraer 135-145 E57-26-00-250-813C-1:PG4 FIG649 - 6AL4V Titanium | 3 | |
| 145GS278-1 | ILCA BENCH TEST SET WITH CALIBRATION CERT | 2 | |
| 15-5 PH | CALIBRATION REFERENCE STANDARD, 15-5 PH STAINLESS STEEL, CONTAINING 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES, (MHIRJ OR EQUIVALENT) | 1 | |
| 15-5PH | CALIBRATION REFERENCE STANDARD 15-5 PH STAINLESS S | 1 | |
| 150PSI | GAUGE 150PSI (CALIBRABLE) | 1 | |
| 151-141 | GAUGE 0-350 PSI (CALIBRABLE) | 1 | |
| 15330-00 | WINGRIP WINGRIP (CALIBRATION) | 2 | |
| 1562A | SOUND LEVEL CALIBRATOR | 1 | |
| 15−5 PH | Calibration reference standard 15−5 PH stainless steel containing 0.008 in. (0.20 mm)0.020 in. (0.51 mm) and 0.040 in. (1.02 mm) deep electrical discharge machined notches (Bombardier Inc. or equivalent) | 1 | |
| 1620A | THERMOHYGROMETER CALIBRATOR : CALIBRATION 1620A PRECISION THERMO-HYGROMETER | 3 | |
| 16A1150-1 | CALIBRATION DIAGRAM – LH WING FIXTURE | 1 | |
| 16A1150-2 | CALIBRATION DIAGRAM – LH WING FIXTURE | 1 | |
| 170-402D | CALIBRATION TESTER I-CHECKER | 2 | |
| 171-13273-003 | TIRES PRESSURE CALIBRATION | 1 | |
| 171T17969-401 | CALIBRATION STAND-ARD | 3 | |
| 171T17973-401 | CALIBRATION STAND-ARD | 4 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 17TES0043 | PORTABLEINTERFACE(PI)(CALIBRATION) | 23 | |
| 1804700-1 | PUMP - HYDRAULIC, CRIMPING TOOL (WITH CALIBRATION CERTIFICATE)_62 LBS, 9.5X11.5 X18.25”_[1804700-1] | 3 | |
| 180DSP-6MHZ-CAL | 180DSP-6MHZ-CAL;Certified Calibration 180 DSP 6MHZ | 1 | |
| 180DSP-6MHZ-FRR | 180DSP-6MHZ-FRR;Fixed Rate Repair and Calibration of 180 DSP 6MHZ | 1 | |
| 1811GA-465 | Pitot Static Calibrator | 13 | |
| 1811GA465 | Calibration - Pitot Static | 13 | |
| 183-1 | COMPARADOR DE CARATULA 0-020" (CALIBRABLE) | 1 | |
| 1863-9700 | MEGOHMMETER (CALIBRABLE) | 6 | |
| 1864-9700 | MEGOHMMETER (CALIBRABLE) | 9 | |
| 186A | Calibration Block | 3 | |
| 186ABCDEF | ET CALIBRATION TEST BLOCK | 1 | |
| 186B | Calibration Block | 3 | |
| 186C | Calibration Block | 4 | |
| 186D | Calibration Block | 4 | |
| 186E | Calibration Block | 4 | |
| 186F | Calibration Block | 3 | |
| 1902510 | EDDY CURRENT CALIBRATION STANDARD ALUMINUM | 1 | |
| 1920166. | PATRON DE CALIBRACION EN ALUMINIO | 1 | |
| 1920168. | PATRON DE CALIBRACION | 1 | |
| 1884370003 | REMOTE CALIBRATION - CONTROL UNIT | 1 | |
| 1884370209 | REMOTE CALIBRATION - CONTROL UNIT | 1 | |
| 188A | CALIBRATION BLOCK | 5 | |
| 18910480000 | TEST SET - DIGITAL AIR DATA (MODEL TTU-205D). RVSM COMPLIANCE IS ACHIEVABLE ON TTU-205D BY USING ENHANCED CALIBRATION CAPABILITY (EEC) UPGRADE. | 1 | |
| 194A | Calibration Block | 4 | |
| 194C | CALIBRATION BLOCK | 1 | |
| 1952-1-3-5 | Force Applicator - stall warning system calibration tool | 4 | |
| 1C8129 | CALIBRATION SYS, PRESS. TRANSDUCER | 1 | |
| 1C8129 REV A | CALIBRATION SYS, PRESS. TRANSDUCER | 1 | |
| 1C8205 | CABLE SET - TRANSDUCER CALIBRATION | 1 | |
| 1C8210G01 | VSV ACTUATOR LEVER MASTER ARM CALIBRATION KIT | 1 | |
| 1G-DSP-CAL | 1G-DSP-CAL;Certified Calibration 1G DSP | 1 | |
| 1G-DSP-FRR | 1G-DSP-FRR;Fixed Rate Repair and Calibration of 1G DSP | 1 | |
| 1GDSP-OPTICS-CAL | 1GDSP-OPTICS-CAL;Certified Calibration 1G DSP Optics | 1 | |
| 1GDSP-OPTICS-FRR | 1GDSP-OPTICS-FRR;Fixed Rate Repair and Calibration of 1G DSP Optics | 1 | |
| 2-069-69-0002 | PROBE & CALIBRATION BLOCK SET | 1 | |
| 2-070 | SIGMA TEST (WITH CALIBRATION) | 2 | |
| 2-164- 501 | CALIBRATION BLOCK (STEEL) | 4 | |
| 2-164-501 | CALIBRATION STANDARD | 4 | |
| 2-164-55 | CALIBRATION BLOCK | 1 | |
| 2-164-551 | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 2 | |
| 2-164-551-2024T3 | CALIBRATION BLOCK | 1 | |
| 2-835-01-9301 | AIRBUS CALIBRATION BLOCK, STAINLESS STEEL, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 | 2 | |
| 2-835-01-9330 | CALIBRATION STANDARD | 2 | |
| 2-835-01-9331 | AIRBUS CALIBRATION BLOCK. MATERIAL: 304 Stainless Steel, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 Includes Test Report and Certificate of Conformance. | 1 | |
| 2-887-01- 9313S | SPLIT CONICAL CALIBRATION BLOCK | 6 | |
| 2-887-01-931-6S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-931-9S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-9313S | CALIBRATION STANDARD - SPLIT - CONICAL | 6 | |
| 2-887-01-9314S | CALIBRATION STANDARD - SPLIT - CONICAL | 5 | |
| 2-887-01-93155 | SPLIT CONICAL CALIBRATION BLOCK | 1 | |
| 2-887-01-9315S | CALIBRATION STANDARD - SPLIT - CONICAL | 4 | |
| 2-887-01-9316S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-9319S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium TYPE SCCS3-7, A318/A319/A320/A321 51-63-06-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887-01-932-1S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-932-3S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-932-5S | CALIBRATION STANDARD - SPLIT - CONICAL | 3 | |
| 2-887-01-9321S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887-01-9323S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887-01-9325S | SPLITTED CONICAL CALIBRATION STANDARD IN 6AL-4V Titanium..TYPE SCCS3-7, A318 51-63-07-991-002A. Includes Test Report and Certificate of Conformance. | 3 | |
| 2-887-019313S | SPLIT CONICAL CALIBRATION BLOCK | 6 | |
| 2-887.01-93145 | CALIBRATION STANDARD SPLIT | 1 | |
| 2. 5 STEP BLOCK | FOR THICKNESS AND LINEARITY CALIBRATION OF THIN MATERIALS- 7075- T6 ALUMINUM, BLACK ANODIZED. | 1 | |
| 2.164-551 | CALIBRATION BLOCK | 2 | |
| 2.887.01-9313-S | CALIBRATION BLOCKS FOR ROTOTEST | 6 | |
| 2.887.01-9314-S | CALIBRATION BLOCKS FOR ROTOTEST | 5 | |
| 2.887.01-9315-S | CALIBRATION BLOCKS FOR ROTOTEST | 4 | |
| 2.887.01-9316-S | CALIBRATION BLOCKS FOR ROTOTEST | 3 | |
| 20-3251 | Trimos 20-3251 Plain Gauge Calibration Module QM-PLAIN | 1 | |
| 20-3252 | Trimos 20-3252 Screw Thread Calibration Module QM-THREAD | 1 | |
| 20-3255 | Trimos 20-3255 Dial Gauge Calibration Module QM-DIAL | 1 | |
| 20-3256 | Trimos 20-3256 Caliper Calibration Module QM-CALIP | 1 | |
| 20-3257 | Trimos 20-3257 Pin Gauge Calibration Module QM-PIN | 1 | |
| 20-3261 | Trimos 20-3261 Gauge Block Calibration Module QM-BLOCK | 1 | |
| 2000-0154-18 | ADAPTER-CALIBRATION ARM | 1 | |
| 2000-1 | MULTITEST PREMIER CALIBRATION | 1 | |
| 2000-151-0 | 5IN CALIB WHEEL | 1 | |
| 2000-152-0 | 10IN BUTTERFLY CALIBRATION WH | 1 | |
| 2000-154-0 | 40IN CALIBRATION ARM | 1 | |
| 2000-2 | MULTITEST SUPR CALIBRATION SYS | 1 | |
| 2000-250-02 | CALIB. STAND BLOCK AND HDWE | 1 | |
| 2000-3 | MULTITEST BASIC CALIBRATION SY | 1 | |
| 201 | CALIBRATION STANDARD, CASA 55-15-00, CASA CN-25515000B001, PT 6, PG 4 | 8 | |
| 2000932 | 2-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, bleed & flow valve, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2000933 | NB-45 Nitrogen booster. Includes calibrated gauges and certificates. | 1 | |
| 2000935 | 2-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2000936 | 2-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2000937 | OB-30 Oxygen Booster System: Includes calibrated gauges with calibration certification. | 1 | |
| 2000938 | 1-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, bleed & flow valve, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2000944 | 3-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2000948 | 1-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2000951 | 4-Bottle oxygen regulator system. 15' (457.2 cm) delivery hose, oxygen charge adapter combo, manual, and calibration certificates. | 1 | |
| 2000MN | PORTABLE V/A/T CALIBRATOR | 1 | |
| 2001120 | 1-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001121 | 3-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001122 | 3-Bottle low pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001123 | 4-Bottle high pressure nitrogen regulator system. 15' (457.2 cm) delivery hose, AERO part number 05-001 inflating valve adapter, manual, and calibration certificates. | 1 | |
| 2001327 | Tire service gauge/inflator: *Digital* Nitrogen (300psi). with push button inflator and push button bleed valve. Straight, non-locking tire chuck Calibrated digital gauge with certificates. | 1 | |
| 2001405 | Tire service gauge/inflator Analog: Nitrogen (300psi). with push button inflator and push button bleed valve. Straight, non-locking tire chuck Calibrated gauge with certificates. | 1 | |
| 2001882 | Tire service gauge/inflator with 12' Hose Analog: Nitrogen (300psi). with push button inflator and push button bleed valve. Straight screw on tire chuck. Calibrated gauge with certificates. | 1 | |
| 2002628 | Low Pressure Tire/Strut Service Gauge: *Digital* Nitrogen (300psi). Bleed Valve, Inlet valve stem connection (m 0.305-32). Outlet hose 18 inch w/valve stem (f 0.305-32). Calibrated gauge with certificates. | 1 | |
| 2002629 | Low Pressure Tire/Strut Service Gauge: Nitrogen (300psi). Bleed Valve, Inlet valve stem connection (m 0.305-32). Outlet hose 18 inch w/valve stem (f 0.305-32). Calibrated gauge with certificates. | 1 | |
| 2002630 | High Pressure Strut Service Gauge: *Digital* Nitrogen (0-3,000 psi). Calibrated gauge with certificates. | 1 | |
| 2002631 | High Pressure Strut Service Gauge: *Digital* Nitrogen (0-5,000 psi). Calibrated gauge with certificates. | 1 | |
| 2002632 | High Pressure Strut Service Gauge: Nitrogen (0-3000 psi). Calibrated gauge with certificates. | 1 | |
| 2002633 | Tire Pressure Gauge (0-300psi). Calibrated gauge with certificates. | 1 | |
| 2002841 | Tire Pressure Gauge (0-300psi). *DIGITAL* Calibrated gauge with certificates. | 1 | |
| 20134E | CALIBRATION REFERENCE STANDARD | 1 | |
| 2024576-1 | THERMOSTAT CALIBRATION FIXTURE | 1 | |
| 2025247 | CALIBIRATION FIXTURE | 1 | |
| 2025247-1 | CALIBRATION FIXTURE | 1 | |
| 203026-101 | TGB BEVEL GEAR - REFERENCE STANDARD, CALIBRATION RING EWR | 1 | |
| 2046S | RELOJ COMPARADOR (CALIBRABLE) | 4 | |
| 2050S | DIAL GAUGE W/CALIBRATION CERTIFICATE | 1 | |
| 20538-00 | KIT-TEST, LF ULB (CALIBRATION) | 3 | |
| 20549SI | LOOP DETECTOR 220V (CALIBRABLE) | 5 | |
| 206-215-002-105 | CALIBRATOR ASSEMBLY | 1 | |
| 2067/7075-T6 | 5 STEP CALIBRAITION BLOCK | 1 | |
| 209PB | Calibration Standard, CASA CN-235 PT6 55-35-00:PG5 FG3 | 1 | |
| 20KG | WEIGHT 20 KG (PATRON CALIBRABLE) | 1 | |
| 210 | CALIBRATION STANDARD, CASA CN-25515100B000 | 2 | |
| 2100-10 | METER - SOUND LEVEL, 40 DBC TO 140 DBC, CALIBRATOR, ADAPTER, & CASE. (QUEST TECHNOLOGIES) | 1 | |
| 2100-100-KIT | ELEC SCREWDRIVER CALIB ADAPT | 1 | |
| 211C223-175CC6 | MICROMETER TRAVEL CALIBRATOR | 1 | |
| 212-92115-0001 | Calibre Flap R/H | 1 | |
| 212-92115-0002 | Calibre Flap L/H | 1 | |
| 212-93000-0101 | Casa Calibration Standard, No.1, Page 3-3 | 1 | |
| 212-93000-0201 | Casa Calibration Standard, No.2, Page 3-5 | 1 | |
| 212-93000-0301 | Casa Calibration Standard, No.3, Page 3-7 | 1 | |
| 212-93000-0401 | Casa Calibration Standard, No.4, Page 3-9 | 1 | |
| 212-93000-0501 | Casa Calibration Standard,57-10-01 & 57-10-02, No.6 Page 3-15 | 1 | |
| 212-93000-0601 | Casa Calibration Standard,57-10-03, No.7 Page 3-17 | 1 | |
| 212-93000-0701 | Casa Calibration Standard, No.10, Page 3-29 | 1 | |
| 212-93011-0001 | Casa Calibration Standard,57-10-03, No.5 Page 3-11 to 3-14, Use BACR15BB5D8C rivet | 1 | |
| 212-93012-0001 | Casa Calibration Standard,57-10-03, No.8 Page 3-19, Use rivet in Drawer 393 | 1 | |
| 212-93013-0001 | Casa Calibration Standard, No.9, Page 3-25, Use MS20470AD4-5 rivet | 1 | |
| 212-93014-0001 | Casa Calibration Standard, No.11, Page 3-31, FE-PL-52SN = 4130 Steel, L3149-T42 = 2024-T4 | 1 | |
| 212-93015-0001 | Casa Calibration Standard, No.12, Page 3-37, Use MS20470AD4-10 rivet | 1 | |
| 21465A72 | INCLINOMETER CALIB. | 1 | |
| 21465A82 | DIGITAL PROTECTOR SELF CALIBRATING | 2 | |
| 2154-451-1 | CONTROL CALIBRAGE CURVE | 1 | |
| 216-61-47 | CALIBRATION SPARE PARTS KIT | 1 | |
| 22-0811 | YAW DAMPER CALIBRATOR | 1 | |
| 220 | CALIBRATION STANDARD, CASA CN-27121120B000 | 8 | |
| 221 | CALIBRATION STANDARD, CASA CN-27120000BA00 | 3 | |
| 2211M | 5-STEP CALIBRATION BLOCK, 304 STAINLESS STEEL | 1 | |
| 2213M | THICKNESS CALIBRATION BLOCKS | 1 | |
| 2214M | 5-STEP CALIBRATION BLOCK, 1018 CARBON STEEL | 1 | |
| 22154861 | AVX-10K UNIT FLIGHT LINE TEST SET CALIBRATION | 1 | |
| 2218M | CALIBRATION BLOCK (1MM - 15MM) | 1 | |
| 223344 | FLUID CALIBRATION KIT | 1 | |
| 2277/90.07 | 2277/90.07;OCC-56 Calibration Report | 1 | |
| 2277RF0100 | 2277RF0100;Fixed Rate Repair and Calibration OLP-55 | 1 | |
| 2279/90.05 | 2279/90.05;OBS-5XY Calibration Report | 1 | |
| 2279RF0100 | 2279RF0100;Fixed Rate Repair and Calibration OLS-55 | 1 | |
| 2280/90.01 | 2280/90.01;Calibration Report OLA-55 | 1 | |
| 2280/90.02 | 2280/90.02;Calibration Report OLA-54 | 1 | |
| 2280/90.03 | 2280/90.03;Calibration Report OLA-55M | 1 | |
| 2280RF0100 | 2280RF0100;Fixed Rate Repair and Calibration OLA-55 / -54 | 1 | |
| 2281/90.01 | 2281/90.01;Calibration Report for OSA 160..501 | 1 | |
| 2289RF0057 | 2289RF0057;Fixed Rate Repair and Calibration OLP-57 | 1 | |
| 23-55ST | CALIBRTATION SET, EDDY CURRENT | 1 | |
| 23005045 | MASTER SET, CALIBRATION, CURVIC COUPLING | 1 | |
| 2301/90.01 | 2301/90.01;Calibration Report | 1 | |
| 2302/90.02 | 2302/90.02;Calibration Report Power Meters - OLP-35V2/-35SC/-38V and OLP-37XV2 | 1 | |
| 2302/90.04 | 2302/90.04;Calibration Report TruePON Testers - OLP-39G and OLP-39X | 1 | |
| 2303/90.01 | 2303/90.01;Calibration Report Light Sources - OLS-34V2/-35V2/-36V2/-38V2 | 1 | |
| 2304/90.01 | 2304/90.01;Calibration Report OSA-110M | 1 | |
| 230440-909 | Tachometer Calibration Kit model 1921 | 1 | |
| 2305/90.03 | 2305/90.03;OLP-87/-88 Calibration Report | 1 | |
| 2307/90.01 | 2307/90.01;Calibration Report for OLP-8x series OPM - not valid for OLP-82 | 1 | |
| 2308/90.01 | 2308/90.01;Calibration Report OLP-85P | 1 | |
| 2311/90.01 | 2311/90.01;Calibration Report ORL-85 | 1 | |
| 2311F | 4 ENGINE TORQUE CALIBRATION (BARFIELD) | 4 | |
| 2313/90.01 | 2313/90.01;Calibration Report for OLS-8x series | 1 | |
| 2325/90.01 | 2325/90.01;Calibration Report OLT-85/OLTS-85 | 1 | |
| 2326/90.01 | 2326/90.01;Calibration Report OLT-85P/OLTS-85P | 1 | |
| 2329/90.11 | 2329/90.11;Calibration Report for MPOLx series | 1 | |
| 2343 | VACUUM RATE GAUGE CALIBRATION KIT | 1 | |
| 2344-0052-09 | CALIB DRIVE ADAPTER PLATE | 1 | |
| 2355 | INDICATOR/REGISTER-MOISTURE, RADOME (MODEL A8AF) (230 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATION (AQUA MEASURE INSTRUMENT COMPANY) | 1 | |
| 2480 | INDICATOR UNCALIBRATED | 5 | |
| 235302 | Calibration Standard, CASA 57-10-16, PG310, FG304a | 1 | |
| 235303 | Calibration Standard, CASA 57-10-16, PG311, FG304b | 1 | |
| 235502 | Calibration Standard, CN235 PT5 57-10-34:PG510 FIG504b | 2 | |
| 235503 | Calibration Standard, CASA CN-235 PT5 53-10-57:PG507 FG504 | 1 | |
| 235505 | Calibration Standard, CASA CN-235 PT5 57-10-05:PG509 FG504a | 1 | |
| 235507 | Calibration Standard, CASA CN-235 PT5 53-10-56:PG507 FG504 | 1 | |
| 235508 | NDI CALIBRATION BLK | 1 | |
| 235509 | Calibration Standard, CASA CN-235 PT5 53-20-42:PG512 FG504 | 1 | |
| 235510 | Calibration Standard, CASA CN-235 PT5 57-20-28:PG512 FG504 | 1 | |
| 235511 | Calibration Standard, CASA CN-235 PT5 53-20-32:PG514 FG505b | 1 | |
| 240536 | "CALIBRATED TEST BENCH WITH WATER SUPPLY THAT CAN SET TO 1.37 | 1 | |
| 249000 | TOOL, CALIBRATION STANDARD | 1 | |
| 249003 | CALIBRTN, STANDARD 0.01 OHMS | 3 | |
| 25-1009-SW-13-L-0/16B-CS-CD4-CERT | CERTFICAT DE CALIBRATION | 1 | |
| 2500-50-0 | 2-1/2IN CALIBRATION WHEEL | 1 | |
| 2522415-1 | TOOL CALIBRATION | 3 | |
| 253-0733 | WRIST STRAP CALIBRATION MONITOR | 1 | |
| 253-210 | ACOUSTIC CALIBRATOR TOOL | 1 | |
| 258125-01 | CALIBRATION TABLE ASSEMBLY | 1 | |
| 258125-02 | CALIBRATION TABLE | 1 | |
| 258125-03 | CALIBRATION TABLE ASSEMBLY | 1 | |
| 258125-04 | CALIBRATION TABLE | 1 | |
| 258820-02 | CALIBRATION TABLE ASSEMBLY 115VAC | 1 | |
| 258820-04 | CALIBRATION TABLE ASSEMBLY 220VAC | 1 | |
| 2591553-901 | CALIBRATOR,STANDBY COMPASS | 4 | |
| 2591553-903 | STANBY COMPASS CALIB | 3 | |
| 2591553-905 | STANBY COMPASS CALIBRATOR - DELETED | 1 | |
| 2591553-906 | CALIBRATOR,STANDBY COMPASS | 2 | |
| 2591553-906 | CALIBRATOR, STANBY COMPASS | 2 | |
| 2591553-907 | CALIBRATOR, STANDBY COMPASS | 1 | |
| 2591553901 | STANDBY COMPASS CALIBRATOR | 4 | |
| 2592080-2 | MC-2 MAGNETIC COMPASS CALIBRATOR SET | 1 | |
| 2592080-4 | MAGNETIC COMPASS CALIBRATOR SET | 1 | |
| 2592080-5 | MAGNETIC COMPASS CALIBRATOR SET | 1 | |
| 2592080-6 | MAGNETIC COMPASS CALIBRATOR SET | 1 | |
| 2592080-7 | MAGNETIC COMPASS CALIBRATOR SET | 1 | |
| 2592080-8 | MCZMAGNETIC COMPASS CALIBRATOR SET | 1 | |
| 266650AT1 | CALIBRATION TOOL (WP 0014 00, TABLE 1, ITEM 47) | 1 | |
| 27-1-6033 | Fokker 50/60 calibration standard Part 6 53-40-05 pages 7&8 figure 4&5. Material 2024-T3 Aluminum. | 1 | |
| 27-1-6047-PROTO | Fokker calibration plate | 1 | |
| 27-18-00062 | CALIBRATING AID 89-01 SERIES | 1 | |
| 27-95031-001 | Calibration Block, Fairchild SA226-32-065:PG8 FIG1 | 2 | |
| 28-0-6026 | CALIBRATED PLATE | 1 | |
| 28-0-6028 | CALIBRATED PLATE | 1 | |
| 28-0-6034 | CALIBRATED PLATE | 1 | |
| 28-0-6036 | CALIBRATED PLATE | 1 | |
| 28-0-6048-PROTO | Fokker Calibration Standard | 1 | |
| 28-0-6049 | Fokker 70/100 Calibration Standard, Part 6 53-10-18 Page 12 Figure 8. Material: 2024-T351 Aluminum. Paint with Primer. Includes Test Report and Certificate of Conformance. | 1 | |
| 2821-007 3W02 | CALIBRATION TOOL | 4 | |
| 2821-0073W02 | CALIBRATION TOOL | 4 | |
| 284453-1-1 | ADAPTER ASSY, OIL PRESSURE, TORQUE CALIBRATION | 1 | |
| 284459-1-1 | ADAPTER ASSY, ORIFICE, NTS CALIBRATION | 1 | |
| 284526-1-1 | CALIBRATION ASSEMBLY | 1 | |
| 284566-1-1 | COVER OIL INLET, TORQUE CALIBRATION | 1 | |
| 29502305 | CALIBRATION PLATE | 1 | |
| 2949110288 | TOOL - CALIBRATION, PAS | 1 | |
| 2949120711 | SET-CONNECTOR,CALIBRATION | 1 | |
| 29491220711 | TOOL - CALIBRATION PROCEDURE | 1 | |
| 29A028 | STANDARD-CALIBRATION | 4 | |
| 29A029 | STANDARD-CALIBRATION | 5 | |
| 29A029YS | AIRBUS CALIBRATION STANDARD, A318/A319/A320/A321 51-63-01-991-001-A PB 1 FIG 60 & A350-A-51-90-01-01001-040A-A-NDT 1, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x 0.13mm(.0051") WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| 29A032 | CALIBRATION STANDARD | 3 | |
| 29A042 | CALIBRATION TOOL | 1 | |
| 29A047 | A318-319-320-321 Calibration Block | 5 | |
| 29A049 | STANDARD-CALIBRATION | 2 | |
| 2C14130G07 | FIXTURE, LIFT - ENGINE HORINZONTAL (CALIBRATION) | 1 | |
| 2C5096G01 | CALIBRATION KIT | 1 | |
| 2C6531G01 | CALIBRE | 1 | |
| 2C6983P08 | THRUST REVERSER OPENING PUMP CALIBRATION | 11 | |
| 2E-WARRANTY | WARRANTY, 2E CALIBRATION (5YR) | 1 | |
| 2MIT65B40500 | ADAPTADOR VENTILACIÓN ESTABILIZADOR HORIZONTAL ( CALIBRE ) | 1 | |
| 2TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | 1 | |
| 2TE65B00776 | HARNESS CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, NUMBER 1 AND 4 MAIN TANKS | 1 | |
| 2TE65B00776-1 | Harness -Calibration Adapter. Fuel Quantity Indicator 1 & 4. Main Tanks | 1 | |
| 2TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4, MAIN TANKS | 1 | |
| 2TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4, MAIN TANKS | 1 | |
| 2TE65B57053 | JUMPER CABLE SET - WATER QUANTITY, TRANSMITTER CALIBRATION | 1 | |
| 2TSJ60B00X | ALIGNMENT TOOL CALIBRATOR | 1 | |
| 3-NOTCHEC | 6AL-4V TITANIUM ALLOY CALIB. BLOCK | 1 | |
| 30 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 3005A0202-01 | CALIBRATION,TOOL | 1 | |
| 3005A0303-01 | CALIBRATION,TOOL | 1 | |
| 3005A0401-01 | CALIBRATION,TOOL | 1 | |
| 3005A0501-01 | CALIBRATION,TOOL | 1 | |
| 3005A0601-01 | CALIBRATION,TOOL | 1 | |
| 3005A0701-01 | CALIBRATION,TOOL | 1 | |
| 3005A0801-01 | CALIBRATION,TOOL | 1 | |
| 3005A0901-01 | CALIBRATION,TOOL | 1 | |
| 3005A1001-01 | CALIBRATION,TOOL | 1 | |
| 3005A1103-01 | CALIBRATION,TOOL | 1 | |
| 3005A1203-01 | CALIBRATION,TOOL | 1 | |
| 3005A1301-01 | CALIBRATION,TOOL | 1 | |
| 3005A1403-01 | CALIBRATION,TOOL | 1 | |
| 30100 | PORTABLE DATA LOADER (CALIBRATION) | 19 | |
| 3017A0202-01 | CALIBRATION,TOOL | 1 | |
| 3017A0301-01 | CALIBRATION TOOL | 1 | |
| 3017A0401-01 | CALIBRATION,TOOL | 1 | |
| 3021A0101-01 | CALIBRATION,TOOL | 1 | |
| 3021A0201-01 | CALIBRATION,TOOL | 1 | |
| 3022-1L | CORNING PYREX 3022-1L GLASS 1000ML "TO CONTAIN" GRADUATED SINGLE METRIC SCALE CALIBRATED CYLINDER | 1 | |
| 302801001 | CLINOMTR CLINOMETER (CALIBRATION) | 1 | |
| 3038A0000-01 | CALIBRATION SET | 3 | |
| 305.003 | TERMOHIGROMETRO DIGITAL (CALIBRABLE) | 1 | |
| 305S-11 | MITUTOYO DIAL INDICATOR | CALIBRATION CERTIFICATE | 1 | |
| 3062/94.01 | 3062/94.01;Calibration Report ONT-506 | 1 | |
| 3067-0001 | CALIBRATING SLEEVE | 1 | |
| 3067A0000-01 | CALIBRATION SLEEVE | 1 | |
| 3076/94.01 | 3076/94.01;Calibration Report ONT-603 | 1 | |
| 3076/94.02 | 3076/94.02;Calibration Report ONT | 1 | |
| 3076/94.03 | 3076/94.03;Calibration Report ONT-612 | 1 | |
| 3076/94.04 | 3076/94.04;Calibration Report ONT-601 MTM | 1 | |
| 3076/94.05 | 3076/94.05;Calibration Report ONT-602 | 1 | |
| 3085-0001 | CALIBRATION SLEEVE | 1 | |
| 3085-0002 | CALIBRATION SLEEVE | 1 | |
| 3085-0004 | CALIBRATION SLEEVE | 1 | |
| 3094-0004 | CALIBRATION TOOL | 1 | |
| 309946-0100 | TEST SET LCR-100 CALIBRATION MODULE PROGRAMMING | 4 | |
| 31-590-100 | ZEROING EQUIPMENT (CALIBRATION NEEDED) | 2 | |
| 3107204-1 | KIT ENGINE CALIBRATION | 1 | |
| 3112 | Portable Live Pressure Calibration and Test System | 1 | |
| 315W5110-6 | COLOR CHIP CALIBRATION | 1 | |
| 3170029-1 | TENSION ADAPTER CALIBRATION EQUIPMENT | 1 | |
| 3170029-1 THRU -4 | TENSION ADAPTER CALIBRATION EQUIPMENT | 1 | |
| 317005-001 | TENSION ADAPTOR CALIBRATION CABLE ASSEMBLIES | 1 | |
| 3171005-001 | TENSION ADAPTER CALIBRATION EQUIPMENT | 1 | |
| 321K263G01 | CABLE RADAR CALIBRATION | 1 | |
| 32303 | ADJUSTABLE SPANNER DESIGNED FOR MAKING PRECISE ADJUSTMENTS ON CALIBRATION INSTRUMENTS AND FITTINGS. | 1 | |
| 328JET-SE.4.44 | Calibration Standard, 328JET PT6 51-60-01:PG9/10 FIG605 | 1 | |
| 330A96221000 | MGB COWLING HANDLE ADJUSTMENT CALIBER | 1 | |
| 3324-800 | CALIBRATION TOOL | 1 | |
| 332A94-4100-00 | BRAKING MOMENT CALIBRATION TOOL | 1 | |
| 332A94279002 | CALIBRATION ASSY TOOL | 1 | |
| 332A94410001 | BRAKING MOMENT CALIBRATION TOOL | 1 | |
| 332A944500.26 | CALIBRATING SHIM | 1 | |
| 332A94‐4100‐01 | BRAKING MOMENT CALIBRATION TOOL | 1 | |
| 332A97520500-CAL | Fuel System Test Case - Calibration & Certification | 1 | |
| 335 | Calibration Block | 10 | |
| 32939 | VALVE CALIBRATION FIXTURE | 1 | |
| 3400674-1 | RETAINER HOLDER CRONOMETRO DIGITAL, CALIBRADO | 2 | |
| 3402462-1 | HARNESS SET, C-130/382 FUEL QUANTITY CALIBRATION | 1 | |
| 3404040-1 | PYAM CALIBRATION TEST SET | 1 | |
| 342-8631 | MANOMETER 10BAR C/W SERVICEPOINT CALIBRA | 1 | |
| 343A100KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) | 6 | |
| 343A10KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) | 1 | |
| 343A160KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) | 2 | |
| 343A1MN3 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) | 2 | |
| 343A1MN3-CAL | Calibration - Dynamometer. Load Cell A330 | 1 | |
| 343A250KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) | 1 | |
| 343A63KN2 | HYDRAULIC LOAD CELL WITH BORING (CALIBRATION) | 7 | |
| 35-016 | ESD CALIBRATION MONITOR | 1 | |
| 35-92115-0001 | Herramienta calibra AOA | 1 | |
| 35-92115-0201 | Herramienta calibra AOA | 1 | |
| 35-92166-0001 | calibre aleron L/H | 1 | |
| 35-92166-0002 | calibre aleron R/H | 1 | |
| 35-92172-0001 | calibre | 1 | |
| 35-92173-0001 | calibre | 1 | |
| 35-92173-0002 | calibre | 1 | |
| 35-92174-0001 | calibre patron reglaje | 1 | |
| 35-92175-0001 | Calibre pedales | 1 | |
| 35-92176-0001 | Calibre | 1 | |
| 35-92177-0001 | calibre | 1 | |
| 35-92177-0002 | calibre | 1 | |
| 35-92178-0001 | calibre | 1 | |
| 35-92178-0002 | calibre | 1 | |
| 35-92178-0002 | CALIBRE | 1 | |
| 35-92181-0001 | calibre | 1 | |
| 35-92181-0002 | calibre | 1 | |
| 3500-CAL | 3500-CAL;Calibration - 3500 | 1 | |
| 3500-CCIOD | 3500-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3500 | 1 | |
| 3500-FRC | 3500-FRC;Fixed Rate Repair and Calibration - 3500 | 1 | |
| 3515-CAL | 3515-CAL;Calibration - 3515 | 1 | |
| 3515-CCIOD | 3515-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3515 | 1 | |
| 3515-FRC | 3515-FRC;Fixed Rate Repair and Calibration - 3515 | 1 | |
| 3515AR-CAL | 3515AR-CAL;Calibration - 3515AR | 1 | |
| 3515AR-CCIOD | 3515AR-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3515AR | 1 | |
| 3515AR-FRC | 3515AR-FRC;Fixed Rate Repair and Calibration - 3515AR | 1 | |
| 3515ARM-CAL | 3515ARM-CAL;Calibration - 3515ARM | 1 | |
| 3515ARM-CCIOD | 3515ARM-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3515ARM | 1 | |
| 3515ARM-FRC | 3515ARM-FRC;Fixed Rate Repair and Calibration - 3515ARM | 1 | |
| 3515EP-CAL | 3515EP-CAL;Calibration - 3515EP | 1 | |
| 3515EP-CCIOD | 3515EP-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3515EP | 1 | |
| 3515EP-FRC | 3515EP-FRC;Fixed Rate Repair and Calibration - 3515EP | 1 | |
| 3515LSR-CAL | 3515LSR-CAL;Calibration - 3515LSR | 1 | |
| 3515LSR-CCIOD | 3515LSR-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3515LSR | 1 | |
| 3515LSR-FRC | 3515LSR-FRC;Fixed Rate Repair and Calibration - 3515LSR | 1 | |
| 3515LSR-GDSC-CAL | 3515LSR-GDSC-CAL;Calibration - 3515LSR-GDSC | 1 | |
| 3515LSR-GDSC-CCIOD | 3515LSR-GDSC-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3515LSR-GDSC | 1 | |
| 3515LSR-GDSC-FRC | 3515LSR-GDSC-FRC;Fixed Rate Repair and Calibration - 3515LSR-GDSC | 1 | |
| 3515LSRKIT-CAL | 3515LSRKIT-CAL;Calibration - 3515LSR KIT | 1 | |
| 3515LSRKIT-CCIOD | 3515LSRKIT-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3515LSR KIT | 1 | |
| 3515LSRKIT-FRC | 3515LSRKIT-FRC;Fixed Rate Repair and Calibration - 3515LSR KIT | 1 | |
| 3515N-CAL | 3515N-CAL;Calibration - 3515N | 1 | |
| 3515N-CCIOD | 3515N-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3515N | 1 | |
| 3515N-FRC | 3515N-FRC;Fixed Rate Repair and Calibration - 3515N | 1 | |
| 3515T-CAL | 3515T-CAL;Calibration - 3515T | 1 | |
| 3515T-CCIOD | 3515T-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3515T | 1 | |
| 3515T-FRC | 3515T-FRC;Fixed Rate Repair and Calibration - 3515T | 1 | |
| 3550-CAL | 3550-CAL;Calibration - 3550 | 1 | |
| 3550-CCIOD | 3550-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3550 | 1 | |
| 3550-FRC | 3550-FRC;Fixed Rate Repair and Calibration - 3550 | 1 | |
| 3554S | 6680 715159209FLOW CALIBRATOR | 1 | |
| 360A94410001 | BRAKING MOMENT CALIBRATION TOOL | 1 | |
| 360DSP-CAL | 360DSP-CAL;Certified Calibration 360DSP | 1 | |
| 360DSP-EU-CAL | 360DSP-EU-CAL;Certified Calibration 360DSP EU | 1 | |
| 360DSP-EU-FRR | 360DSP-EU-FRR;Fixed Rate Repair and Calibration of 360 DSP EU | 1 | |
| 360DSP-FRR | 360DSP-FRR;Fixed Rate Repair and Calibration of 360 DSP | 1 | |
| 365A94-3540-00 | ENGING CALIBRATION TOOLING | 1 | |
| 365A94-3540-02 | ENGING CALIBRATION TOOLING | 1 | |
| 38-368-02 (CALIB) | UNIT UNIT-TEST,SENSOR (CALIBRATION) | 1 | |
| 38-385-01 | TRANSDUCER CALIBRATION & ACCEPTANCE TEST BOX | 1 | |
| 38-798-04 | PROXIMITY SENSOR BREAKOUT BOX (CALIBRATED) | 3 | |
| 382-57-74 82-688 | HERCULES CALIBRATION BLOCK 382-57-74 82-688 | 1 | |
| 387991-003 | FIELD CALIBRATION UNIT | 1 | |
| 387991-00319 | FUEL QUANTITV CALIBRATION (SIMMONDS) | 1 | |
| 39-C8 | REBUILT & CALIBRATED AIRCRAFT CABLE TENSIOMETERS | 1 | |
| 390-382032-935 | FUEL SYSTEM CALIBRATOR | 2 | |
| 390-382032/935 | FUEL SYSTEM CALIBRATION UNIT | 2 | |
| 3900-CAL | 3900-CAL;Calibration - 3900 | 1 | |
| 3900-CCIOD | 3900-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3900 | 1 | |
| 3900-FRC | 3900-FRC;Fixed Rate Repair and Calibration - 3900 | 1 | |
| 3920N-CAL | 3920N-CAL;Calibration - 3920N | 1 | |
| 3920N-CCIOD | 3920N-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 3920N | 1 | |
| 3920N-FRC | 3920N-FRC;Fixed Rate Repair and Calibration - 3920N | 1 | |
| 4170 | CF1 CALIBRATION TEST DEVICE | 2 | |
| 4181 | PRECISION INFRARED CALIBRATOR | 1 | |
| 4231 | SOUND LEVEL CALIBRATOR | 3 | |
| 4421 | CALIBRATORE UNIVERSALE BURSTER | 1 | |
| 40221 | CALIBRATION TOOL | 1 | |
| 505056 | 10 GAUSS CALIBRATED FIELD INDICATOR -P/N:505056 (NDT MAGNETIC PARTICLE TEST) | 5 | |
| 4070352 | ALTITUDE ASSEMBLY CALIBRATION FIXTURE | 1 | |
| 4091449 | MCDU PROGRAMMING AND CALIBRATION STATION | 1 | |
| 4317885 | FLUKE MAKE 3130-G2M PORTABLE GAS PRESSURE CALIBRATOR | 1 | |
| 5000197 | DIGITAL CALIBRATOR | 1 | |
| 39374884 | CALIBRATION PLATE | 1 | |
| 3NOTCHEC.IT | 6AL-4V TITANIUM ALLOY CALIB. BLOCK | 1 | |
| 3TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | 1 | |
| 3TE65B00776 | HARNESS CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, NUMBER 1 AND 4 RESERVE, CENTER WING AUXILIARY TANKS | 1 | |
| 3TE65B00776-1 | Harness -Calibration Adapter. Fuel Quantity Indicator 1 & 4 Reserve Tanks | 1 | |
| 3TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4 RESERVE TANKS | 1 | |
| 3TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 1 & 4 RESERVE TANKS | 1 | |
| 4000-0725-001 | BRIGHT CALIBRATION UNIT | 1 | |
| 4000-CCIOD | 4000-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 4000 | 1 | |
| 400B1 | CALIBRATOR | 2 | |
| 4040124-002 | RIG RIG, PORTABLE - FILLING, LIQUID (CALIBRATION) | 1 | |
| 4061693-901 | MODULE CALIBRATION | 1 | |
| 4091449-902 | OPTICAL TEST STATION (MCDU PROGRAMMING AND CALIBRATION STATION (PACS)) | 1 | |
| 4115-0010W02 | CALIBRATION RING REMOVAL TOOL | 1 | |
| 4115-0801W03 | MLG DYNAMIC SEALS CALIBRATION SOCLE | 1 | |
| 412-274-001-101 | CALIBRATION TOOL, CMT | 1 | |
| 4124-0023W02 | NLG DYNAMIC SEALS CALIBRATION TOOL | 1 | |
| 42-27-04-019 | FIXTURE FOR CALIBRATING THE LEAF SPRINGS INDIVIDUALLY | 1 | |
| 42-27-04-022 | STUD FOR CALIBRATING THE LEAF SPRINGS INDIVIDUALLY | 1 | |
| 4215-01 | CALIBIRATION TRIM UNIT | 1 | |
| 4231-CAF | CALIBRATION OF SOUND CALIBRATOR | 1 | |
| 427-201-001-149 | CALIBRATION PIN | 1 | |
| 429-201-001-101 | PERIODIC ROD CALIBRATION TOOL | 1 | |
| 429-201-006-101 | PROPELLER ANGLE CALIBRATION TOOL | 1 | |
| 42A12/1 | ULTRASON ULTRASONIC TEST SET (CALIBRATION) | 18 | |
| 4306065051-1000 | TEST SET - TPIS (CALIBRATION) | 2 | |
| 438-0043-803-01 | CALIBIRATION TOOL | 1 | |
| 43873-T601 | SLEEVE-CALIBRATION | 1 | |
| 44-10960 | MPT. MAINTENANCE LNSTRUMENT CALIBRATION VERIFICATI | 1 | |
| 45-128 | Custom 8 Hole Calibration Standard Test Coupon Assembly Figure 5 Page 10 to include the following Pieces. Figure 2 Page 7. Material .071" 2024-T3 Clad Aluminum, 7 EDM Flaws total. Figure 3 Page 8 .250" 4130or4340 Steel 0 EDM Flaws total and Figure 4... | 2 | |
| 45-128-1 | Custom 8 Hole Calibration Standard Test Coupon. Figure 1 Page 7. Material .071" 2024-T3 Clad Aluminum. 7 EDM Flaws total. | 1 | |
| 45-128-2 | Custom 8 Hole Calibration Standard Test Coupon. Figure 3 Page 8. Material .250" 4130/4340 Steel. 0 EDM Flaws total. | 1 | |
| 45-128-3 | Custom 8 Hole Calibration Standard Test Coupon. Figure 4 Page 9. Material .125" 2024-T3 Clad Aluminum. 0 EDM Flaws total. | 1 | |
| 45-135030-9/ 810 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 2 | |
| 457A | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 1 | |
| 45TS-CCIOD | 45TS-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 45TS | 1 | |
| 50184040 | CALIBRATION TOOL (100-400MM 60-300FT-LBS 3/4") | 1 | |
| 460004837 | CALIBRATED SEGMENT POINTER | 1 | |
| 460005835 | SLEEVE SLEEVE - GROUND LOCK (CALIBRATION) | 45 | |
| 460007011 | AXLE NUT (CALIBRATION) | 27 | |
| 4611376500 | BALANCING CALIBRATION TOOL | 1 | |
| 4618281505 | BALANCING CALIBRATION TOOL | 1 | |
| 4618286505 | BALANCING CALIBRATION TOOL | 1 | |
| 473292-1 | TEST UNIT, CALIBRATION AND MAINTENANCE | 1 | |
| 475-1-FM-AV-NIST | MANOMETER KIT WITH CALIBRATION | 1 | |
| 49900-889-104 | FIELD LOAD CHECK TOOL CALIBRATION | 3 | |
| 50 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 50-0743-02 | DEM CALIBRATION FIXTURE | 1 | |
| 500-12Y | SURETEST CALIBRATOR CDI | 1 | |
| 500-176518-03 | VOLTAGE STANDING WAVE RATIO (VSWR) PRIMARY CALIBRATION ADAPTER ASSEMBLY, SIZE 5 | 1 | |
| 500-176518-04 | VOLTAGE STANDING WAVE RATIO (VSWR) DIVERSITY CALIBRATION ADAPTER ASSEMBLY, SIZE 12 | 1 | |
| 5000-3 | SURETEST BASIC CALIBRATION SYS | 3 | |
| 5000-ST | SURETEST CALIBRATOR CDI | 1 | |
| 50174-TSJ-P | PITCH/YAW CALIBRATION TEST SET | 1 | |
| 50200601-N-S | INJECTOR CALIBRATION HOLES | 1 | |
| 5035-0020W01 | CALIBRATION TOOL - NLG | 1 | |
| 50364-0XXX-CCIOD | 50364-0XXX-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 50364-0XXX | 1 | |
| 51018-0101 | CALIBRATION CABLE | 1 | |
| 51018-0102 | CALIBRATION CABLE | 1 | |
| 512.22.12.055 | AOA CALIBRATION TOOL | 1 | |
| 512.22.12.056 | AOA CALIBRATION TOOL | 1 | |
| 513,22.12.050 | CALIBRATION FIXTURE L/H | 1 | |
| 513-22-12-056 | AOA CALIBRATION RH ASSY | 1 | |
| 513.22.12.050 | KLT, CALIBRATION' AOA, LH | 1 | |
| 513.22.12.051 | KLT, CALIBRATION - AOA, RH | 1 | |
| 513.22.12.055 | AOA CALIBRATION TOOL, LH | 1 | |
| 513.22.12.056 | AOA CALIBRATION TOOL, RH | 1 | |
| 515 | ELECTRICAL MASTER CALIBRATION | 1 | |
| 515-741 | Mitutoyo calibration fixture | 1 | |
| 5171A0000-01 | CALIBRATING SLEEVE | 1 | |
| 5172A0000-01 | CALIBRATING SLEEVE | 1 | |
| 521 | PROGRAMMABLE DC VOLTAGE CURRENT CALIBRATOR | 1 | |
| 5201 | DIGITAL THERMOMETER CALIBRATOR | 4 | |
| 520A | PROGRAMMABLE DC VOLTAGE CURRENT CALIBRATOR | 1 | |
| 520CGC | Pull Tester Calibration Kit (Add to cart: Add To Cart) | 1 | |
| 5226 | CONTAINER - 1 QUART (1 LITER), CALIBRATED | 1 | |
| 528100-001 | COIN, CALIBRATED | 1 | |
| 5290020-4 | Cessna Model 401/402 Calibration Standard Figure 4 part 2 & 3 Inspection. Plate A - 7075-T6 Aluminum and Plate B - 2024-T3 Aluminum. | 1 | |
| 5290024-1 | CESSNA CALIBRATION REFERENCE STANDARD | 1 | |
| 53-10-00-250-805-AE1 | CALIBRATION STANDARD | 1 | |
| 53-10-087/1 | Calibration Standard, BAe 4100 PT6 53-10-87:PG8 FIG4 | 1 | |
| 53-10-110A | Raytheon 125 Series Calibration Standard. Material: 4340 Cres Steel. Includes Test Report and Certificate of Conformance. | 2 | |
| 53-10-110A/1 | Raytheon Calibration Standard, 125 Series, 53-10-110A Fig 2 | 1 | |
| 53-10-110A/2 | Raytheon Calibration Standard, 125 Series, 53-10-110A Fig 2 | 1 | |
| 5301-79 | CORASDEV CORAS DEVICE - RESISTIVITY TEST (CALIBRATION) | 1 | |
| 5301-79-99ZZZ | TEST SET - ANTISTATIC PROTECTION C/W CALIBRATION CERT | 1 | |
| 530G12401-1 | CALIBRATION BLOCK KIT FOR CRANKSHAFT INSPECTION | 1 | |
| 530G12406-1-3 | CALIBRATION STANDARDS-STEEL | 1 | |
| 531122T | CALIBER | 1 | |
| 5431 | PLATE CALIBRATION | 8 | |
| 547100-016 | STALL WARNING GROND CALIBRATION TEST SET AS RENT | 1 | |
| 5471100-014 | STALL WARNING GROUND CALIBRATION BOX | 3 | |
| 5471100-016 | STALL WARNING GROUND CALIBRATION TEST SET | 1 | |
| 55-1021-00 | CALIBRATION CABLE | 1 | |
| 55-1021-01 | CALIBRATION CABLE | 1 | |
| 55-1021-03 | CALIBRATION CABLE | 4 | |
| 55-1021-03-CCIOD | 55-1021-03-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 55-1021-03 | 1 | |
| 55-1021-05 | CALIBRATION CABLE | 2 | |
| 55-36-01 | UT CALIBRATION REFERENCE STANDARD , STEP WEDGE, 7000 SERIES ALUMINUM, GENERIC AS PER ATR 72 NTM 55-36-01 | 1 | |
| 5502A | FLUKE CALIBRATOR | 1 | |
| 5502E 240 | FLUKE MULTI PRODUCT CALIBRATOR | 1 | |
| 5502E-240 | FLUKE MULTI PRODUCT CALIBRATOR | 1 | |
| 5520A | CALIBRATOR | 1 | |
| 5522A | CALIBRATOR | 1 | |
| 55872S0002 | CALIBRATING SLEEVE | 1 | |
| 56040S0005 | CALIBRATE PLATE | 1 | |
| 56602S0004 | CALIBRATION SLEEVE | 1 | |
| 56609S0001 | CALIBRATING SLEEVE | 1 | |
| 5677-0001 | ASSEMBLY / CALIBRATION - SEAL | 1 | |
| 57-0034 | CALIBRATION STANDARD | 1 | |
| 57-10-102-2 | BAE146 NDT CALIBRATION BLOCK | 1 | |
| 57-10-102-4 | BAE146 NDT CALIBRATION BLOCK | 1 | |
| 57-12-501 | RIGHT AND LEFT WING REAR BEAM AT BL 35.8 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40007-1NDT (GULFSTREAM) | 1 | |
| 57-12-502 | RIGHT AND LEFT WING REAR BEAM AT RBS 103.3 — EDDY CURRENT INSPECTION PROBE :SPO 5053 PROBE :SPO 5054 CALIBRATION STANDARD, 1159W40005-1NDT (GULFSTREAM | 1 | |
| 57-12-504 | RIGHT AND LEFT WING REAR BEAM AT RBS 230.1 — EDDY CURRENT INSPECTION CALIBRATION STANDARD, 1159W40063-1NDT (GULFSTREAM | 1 | |
| 570-1112-03 | 0° CALIBRATION FIXTURE | 1 | |
| 570-1112-08 | 20° CALIBRATION FIXTURE | 1 | |
| 570-1112-14 | CALIBRATION FIXTURE | 1 | |
| 570-1112-18 | CALIBRATION FIXTURE | 1 | |
| 570-5894-01 | CALIBRATION FIXTURE | 1 | |
| 570-5894-02 | ZERO DEGREES CALIBRATION FIXTURE | 1 | |
| 570-5894-03 | 7 DEGREES CALIBRATION FIXTURE | 1 | |
| 570-5894-04 | CALIBRATION FIXTURE | 1 | |
| 570-5894-05 | CALIBRATION FIXTURE | 1 | |
| 570-5894-06 | CALIBRATION FIXTURE | 1 | |
| 570-5894-07 | CALIBRATION FIXTURE | 1 | |
| 570-5894-08 | CALIBRATION FIXTURE | 1 | |
| 570-5894-09 | CALIBRATION FIXTURE | 1 | |
| 570-5894-12 | CALIBRATION FIXTURE | 1 | |
| 570-5894-13 | CALIBRATION FIXTURE | 1 | |
| 570-5894-15 | CALIBRATION FIXTURE | 1 | |
| 570-7259-01 | UNIVERSAL CALIBRATION FIXTURE | 1 | |
| 570-8552-01 | CALIBRATION TEST SET | 2 | |
| 57103-0007 | CALIBRATING SLEEVE | 1 | |
| 57201S78110000000 | CALIBRATION TOOL (ATR42) | 1 | |
| 57203S78110000000 | CALIBRATION TOOL (ATR72) | 1 | |
| 5730.A | MULTIFUNCTIONAL CALIBRADOR-5730 A | 1 | |
| 57499-0001 | CALIBRATION SLEEVE | 1 | |
| 57499-0002 | CALIBRATION SLEEVE | 1 | |
| 57499A0000-01 | CALIBRATION TOOL SET | 1 | |
| 57565-0002 | Calibration Sleeve | 1 | |
| 57565-0004 | Calibration Sleeve | 1 | |
| 57565-0006 | Calibration Sleeve | 1 | |
| 57629-0002 | CALIBRATION SLEEVE | 1 | |
| 57629A0000-01 | Calibration Sleeve | 1 | |
| 57738A0000-01 | Calibration Sleeve | 3 | |
| 58.27 MS/M,43G MS/M | CONDUCTIVITY CALIBRATION STANDARD | 1 | |
| 68 | SPRING TESTER WITH CALIBRATIONG SPRING | 1 | |
| 663 | NIPPLE-CGA 540 X1/4 ANPT (CALIBRATED GAUGE COMPONENT) | 3 | |
| 718 | ULTRASONIC CALIBRATION BLOCK FOR INCONEL 718 | 1 | |
| 721 | HIGH-ACCURACY PRESSURE CALIBRATOR WITH A WIDE MEASUREMENT RANGE, IDEAL FOR CALIBRATING GAUGES AND TRANSDUCERS. | 1 | |
| 725 | Multifunction Calibrator | 2 | |
| 6111 | CALIBRATION TOOL | 4 | |
| 6450 | AIR DATA CALIBRATOR | 1 | |
| 7103 | HANDHELD CALIBIRATOR | 1 | |
| 7198 | Pressure Calibration Accessories Kit | 1 | |
| 58030 | 58030;Cable SP-737 TSD Calibration | 1 | |
| 58030-TS | 58030-TS;Cable; SP-737 TSD Calibration | 1 | |
| 58035 | 58035;Cable ATSD Wet Calibration Goodrich | 1 | |
| 58174A0000-01 | CALIBRATION MANDREL | 1 | |
| 58236A0000 | CALIBRATE MANDREL | 1 | |
| 58294-0001 | CALIBRATING SLEEVE | 1 | |
| 58294A0000-01 | CALIBRATING SLEEVE | 1 | |
| 58295A0000-01 | CALIBRATING SLEEVE | 1 | |
| 59043A0000-01 | CALIBRATING PLATE | 1 | |
| 59108 | NDT CALİBREASYON BLOCK (K1) | 1 | |
| 552391 | A8-AF CALIBRATION CHECK | 2 | |
| 589788 | SPANNER (TO ADJSUT EFFECTIVE LENGTH OF CALIBRATION ARM | 1 | |
| 52110091 | 7791-MECHANICAL LOADER FOR TQ CALIB | 1 | |
| 52110092 | 7792-MECHANICAL LOADER FOR TQ CALIB | 1 | |
| 58243004 | 734K/4-1/4"DR CALIBRATING INSERT | 1 | |
| 58243005 | 734K/5-3/8"DR CALIBRATING INSERT | 1 | |
| 58243020 | 734K/20-1/2"DR CALIBRATING INSERT | 1 | |
| 58243040 | 734K/40-3/4"DR CALIBRATING INSERT | 1 | |
| 59011003 | 70.VK.3-3/8"X3/8" CALIBRATING SQ DRIVE | 1 | |
| 59011008 | 70.VK.8-3/4"X3/4" CALIBRATING SQ DRIVE | 1 | |
| 59011011 | 70.VK.502.1/2-1/2"X1/2" CALIBRATING SQ DRIVE | 1 | |
| 59011014 | 70.VK.11-3/8"X1/4" CALIBRATING SQ DRIVE | 1 | |
| 526646004 | TIRE FILLER INFLATING TOOL MUST HAVE CALIBRATION C | 1 | |
| 5923792-503 | TOOL, CALIBRATING BA | 1 | |
| 5923792-505 | Calibration Equipment | 1 | |
| 59348-0002 | CALIBRATION MANDREL | 1 | |
| 59545-0026 | CALIBRATING SLEEVE | 1 | |
| 59794A0000-01 | Calibrate Mandrel | 1 | |
| 5TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, CENTER WING TANK | 1 | |
| 600 000 303 | GENERATOR - AUDIO, PINK NOISE (CALIBRATION) | 1 | |
| 600-0002-000 | CALIBRATING GAS MIXTURE | 1 | |
| 600-0071-020 | CALIBRATING GAS MIXTURE;|ITEM IS USED TO CALIBRATE THE FUEL TANK MONITOR; | 1 | |
| 6000-CCIOD | 6000-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 6000 | 1 | |
| 60000021-101 | AHRS CALIBRATION SOFTWARE (for Windows) | 1 | |
| 601-200 | CALIBRATION METER 601-065 | 1 | |
| 6015-CCIOD | 6015-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 6015 | 1 | |
| 601R29-030K90 | KIT, NDT CALIBRATION TOOL | 2 | |
| 601R29-033K90 | KIT, CALIBRATION TOOL, ULTRASONIC | 1 | |
| 601R32-079K90 | CALIBRATION STANDARD KIT | 1 | |
| 60246.TBOX | SMART TRANSDUCER CALIBRATION SYSTEM | 1 | |
| 60332-TWC-1500MANU | CALIBRATION BENCH OF THE BLOW | 1 | |
| 622-7321-001 | EFD/MFD GAIN POSITION CALIBRATOR TEST SET | 1 | |
| 62341-101 | CALIBRATION FIXTURE | 1 | |
| 6263-6101 | MLG DYNAMIC SEALS CALIBRATION BULLET | 1 | |
| 6263-6301 | NLG STATIC SEAL INSTALL & CALIBRATION | 1 | |
| 6263A2200-01 | MLG STATIC SEAL CALIBRATION TOOL | 1 | |
| 6263A6300-01 | STATIC SEALS CALIBRATION TOOL | 1 | |
| 6266-060 | NEUTRAL CALIBRATION PIN FOR COCKPIT MODULE | 1 | |
| 627A200-A | NEUTRAL CALIBRATION PIN FOR COCKPIT MODULE | 1 | |
| 627A200-C | NEUTRAL CALIBRATION PIN FOR COCKPIT MODULE | 1 | |
| 632A170-A | TOOLCALIBRATING PIN FOR EMERGENCY DISCHARGE SYSTEM | 1 | |
| 636-1000_29GSE | ENGINE MOUNT HOISTING DEVICE FW (CALIBRATION) | 5 | |
| 636-2000_17 | FAN COWL HANDLING SLING (CALIBRATION) | 3 | |
| 6380002-1 | CALIBRATION STANDARD KIT | 1 | |
| 63912018 | CALIBRATION TOOL | 1 | |
| 640-025-010 | EC SPLIT CONICAL CALIB. BLOCK - TITANIUM | 1 | |
| 640-050-001 | STANDARD-CALIBRATION | 1 | |
| 640-050-002 | CALIBRATION BLOCK | 2 | |
| 640-050-003 | CALIBRATION STANDARD | 2 | |
| 6433-126-000 | GRADUATED ANTENNA CALIBRATION TOOLING | 1 | |
| 6442-56/И-175 | CALIBRATED KEY | 1 | |
| 6455T17 | HIGH-ACCURACY HUMIDITY AND TEMPERATURE METER WITH CALIBRATION CERTIFICATE (HYGROMETER) | 1 | |
| 649-0667-001 | POSITION CALIBRATION FIXTURE | 1 | |
| 65011-101 | CALIBRATION FIXTURE | 1 | |
| 6583102-1 | CALIBRATION BLOCK | 1 | |
| 6583103-1 | Cessna Model 500 Calibration Standard 53-30-03-0 Rev. 14 Figure 4 Sheet 1 Inspection. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 6635000220368 | ULTRASONIC TESTING SPARES:- BASIC CALIBRATION BLOCK FOR ULTRASONIC TESTER | 1 | |
| 6635010925129 | UT CALIBRATION BLOCK | 1 | |
| 670BA29012K90 | KIT, NDT CALIBRATION TOOL | 1 | |
| 670BA32021K90 | KIT, TOOL CALIBRATION NDT | 1 | |
| 6775211 | M6 PROGRAM MASTER ORIFICE SET FOR TEST STAND CALIBRATION | 1 | |
| 6798233 | TD AMPLIFIER ADJUSTMENT AND CALIBRATION TESTER | 7 | |
| 68871-CCIOD | 68871-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 68871 | 1 | |
| 6887859 | SWITCH ACTUATION AND TRAVEL CALIBRATOR | 1 | |
| 6683101-17 | ET CALIBRATION STANDARD, 560 XL SKIN AND DOUBLER | 1 | |
| 6799215 | TD AMPLIFIER ADJUSTMENT AND CALIBRATION TESTER | 1 | |
| 68920-607 | CALIBRATION TOOL | 1 | |
| 68920-607-1 | BIMETAL CALIBRATION TOOL | 1 | |
| 68935-872-1 | CALIBRATION STAND | 1 | |
| 68941-125-1 | CALIBRATION DIAL | 1 | |
| 6897099 | TEST STRIP HOLDER HOLDS TEST STRIP DURING SHOT PEEN MACHINE CALIBRATION. | 1 | |
| 6897100 | TEST STRIP HOLDER HOLDS TEST STRIP DURING SHOT PEEN MACHINE CALIBRATION. | 1 | |
| 68D050090-1001 | CALIBRATION KIT, ULTRASONIC | 1 | |
| 68D50090-1001 | CALIBRATION KIT, ULTRASONIC | 1 | |
| 69-100-0075 | SENSOR VIBE ACCEL 991D-1 20MV/G ACCESSORIE REQUIRED FOR EC 145 TOOL MUST BE DELIVERED WITH RECENT CALIBRATION. | 2 | |
| 6976CN | CALIBRATION TOOL 1-6NM | 1 | |
| 699-1854 | RSCAL 6973828 SLC1356 SOUND CALIBRAT | 1 | |
| 6SD800NM | TORQUE WRENCH (CALIBRATION) | 3 | |
| 6TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY TOTALIZER | 1 | |
| 7000-CCIOD | 7000-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 7000 | 1 | |
| 700G27 | PRESSURE GAUGE CALIBRATOR | 1 | |
| 700G31 | PRESSURE GAUGE CALIBRATOR | 1 | |
| 700P27 | Calibration Transducer (module dari Fluke 725) | 1 | |
| 701-CCIOD | 701-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 701 | 1 | |
| 703A91-0211-01 | MANILLE CALIBRE 16 | 1 | |
| 703A94‐6102‐20 | VERIFICATION ADAPTOR CALIBRATION | 1 | |
| 703A97-6702-00 | CALIBRATEUR DE TEMPERATURE | 1 | |
| 703A97670201 | CALIBRATION TEMPERATURE | 1 | |
| 70521 | THICKNESS CALIBRATION BLOCK, 05 STEPS (0.100 / 0.200 / 0.300 / 0.400 AND 0.500 INCH) | 1 | |
| 70700-20135-101 | CALIBRATION RING | 1 | |
| 7075-3-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-012 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-025 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-050 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-075 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-150 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-600 | CALIBRATION BLOCK | 1 | |
| 7075-8-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-8-0-600 | CALIBRATION BLOCK | 1 | |
| 712B | PORTABLE TEMPERATURE CALIBRATOR DESIGNED FOR CALIBRATING THERMOCOUPLES AND RTDS WITH HIGH ACCURACY. | 1 | |
| 71300030-001 | Calibration Kit Lift | 1 | |
| 7175T7351 | NDT CALIBRATION BLOCK - 7175T7351 - RANGE: 2MM | 1 | |
| 7175T7351 - RANGE 1MM TO 25MM | THICKNESS CALIBRATION BLOCK | 1 | |
| 7175T7351 - RANGE: 2MM TO 12.5MM | ULTRASONIC THICKNESS GAUGE CALIBRATION BLOCK | 1 | |
| 718-30G | CALIBRADOR DE PRESION | 3 | |
| 7200-CCIOD | 7200-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 7200 | 1 | |
| 7200CAL | 7200CAL;Calibration - 7200 | 1 | |
| 7200G-CAL | 7200G-CAL;Calibration - 7200G | 1 | |
| 7200G-CCIOD | 7200G-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 7200G | 1 | |
| 7200KOREAPKG-CAL | 7200KOREAPKG-CAL;Calibration - 7200 Korea Pkg | 1 | |
| 7200KOREAPKG-CCIOD | 7200KOREAPKG-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 7200 Korea Pkg | 1 | |
| 730/40 | CALIBRATION TOOL (100-400MM 60-300FT-LBS 3/4") | 1 | |
| 730N/2 | CALIBRATION TOOL 4-20NM | 1 | |
| 730N/40 | CALIBRATION TOOL 730N/40 005510-720-000 | 2 | |
| 730R/5 | CALIBRATION TOOL. 730R/5 (526240037NM) (5-50NM5-35FT-LBS 3/8") | 1 | |
| 730R/5 (526240037NM) | CALIBRATION TOOL (5-50NM5-35FT-LBS 3/8") | 1 | |
| 732-38A | DENSITY TABLET CALIBRATED 4 STEP CHECK TABLET | 1 | |
| 73AR75 | CALIBRATION TOOL (0-560 FT/LBS 3/4") | 1 | |
| 7417030 RE-CERT | ANNUAL SERVICE AND CALIBRATION CONTRACT | 1 | |
| 7455-20 | CALIBRATION TOOL 4-20NM | 2 | |
| 754 | PROCESS CALIBRATOR (PRESSURE CALIBRATOR) | 1 | |
| 7637987-1 | Calibration Block | 1 | |
| 7708-BER | 7708-BER;Certified Calibration with Incoming and Outgoing DATA - 7708 | 1 | |
| 7708-CCIOD | 7708-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 7708 | 1 | |
| 778306P21 | CALIBRATION SOFTWARE | 1 | |
| 79001866-1 | POTENTIOMETER CALIBRATION FIXTURE | 1 | |
| 7TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR, NUMBER 2 AND 3 RESERVE TANKS | 1 | |
| 7TE65B00776-101 | FUEL QUANTITY CALIBRATION HARNESS | 1 | |
| 8-060-02CP | SWITCH CARD - CENTER POINT CALIBRATED | 1 | |
| 8-751-01 | CALIBRATION TARGET GO GAUGE | 2 | |
| 8-800-01-014 | CARD, CALIBRATION | 2 | |
| 8-931-01 | Target - Calibrated Proximity Sensor | 5 | |
| 80RS01 | CALIBRATION STANDARD, | 1 | |
| 80RS02 | CALIBRATION STANDARD, | 1 | |
| 80RS03 | CALIBRATION STANDARD, | 1 | |
| 80RS04 | CALIBRATION STANDARD, | 1 | |
| 80RS05 | CALIBRATION STANDARD, | 1 | |
| 80RS07 | CALIBRATION STANDARD, | 2 | |
| 80RS08 | CALIBRATION STANDARD, | 1 | |
| 80RS10 | Calibration Standard, MD80 SID Section 2-1:FIG13 PG1 SHEET1 | 2 | |
| 80RS11 | Calibration Standard, MD80 SID Section 2-1:FIG16 PG1 SHEET1 | 1 | |
| 80RS12 | Calibration Standard, MD80 SID Section 2-1:FIG19 PG1 SHEET1 | 1 | |
| 80RS13 | Calibration Standard, MD80 SID Section 2-1:FIG20 PG1 SHEET1 | 1 | |
| 80RS15 | Calibration Standard, MD80 SID Section 2-1:FIG22 PG1-4 | 2 | |
| 80RS16 | Calibration Standard, MD80 SID Section 2-1:FIG23 PG1 SHEET1 | 1 | |
| 80RS18 | Calibration Standard, MD80 SID Section 2-1:FIG25 PG1 SHEET1 | 2 | |
| 80RS21 | Calibration Standard, MD80 SID Section 2-1:FIG29 PG1-3 | 2 | |
| 80RS23 | Calibration Standard, MD80 SID Section 2-1:FIG31 PG1 SHEET1 | 1 | |
| 80RS25 | Calibration Standard, MD80 | 1 | |
| 80RS26 | Calibration Standard, MD80 | 1 | |
| 80RS3 | Calibration Standard, MD80 SID Section 2-1:FIG3 PG1 SHEET1 | 1 | |
| 80RS4 | Calibration Standard, MD80 SID Section 2-1:FIG4 PG1 SHEET1 | 1 | |
| 80RS5 | Calibration Standard, MD80 SID Section 2-1:FIG5 PG1 SHEET1 | 1 | |
| 80RS6 | Calibration Standard, MD80 SID Section 2-1:FIG6 PG1 SHEET1 | 2 | |
| 80RS7 | Calibration Standard, MD80 SID Section 2-1:FIG7 PG1 SHEET1 | 1 | |
| 81-0226-06 | CALIBRATION KIT (GAS TECH, INC.) | 1 | |
| 810-45-135030-9 | SERIES REFERENCE: 1077. NOMENCLATURE: TRIM TAB FREE PLAY CHECK FIXTURE. SPECIFICATIONADDITIONAL DATA: LOCAL MANUFACTURE PER APPROPRIATE MM ATA 27 AS ALTERNATE TOOL. CALIBRATED DIAL INDICATOR MUST BE WITH UNIT FOR USE. ATA: 270055 | 1 | |
| 830-6489-001 | CALIBRATION KIT | 1 | |
| 8300 | ANGLE POSITION INDICATOR (CALIBRATION) | 2 | |
| 831010-1 | Calibration Gage | 1 | |
| 833675-1 | PRE TEST CALIBRATION FIXTURE | 1 | |
| 834698-1 | TEST SET - THERMOSTAT CALIBRATION - GTCP85-129 | 2 | |
| 835226-1 | CALIBRATION TOOL | 1 | |
| 835285-1 | "THERMOSTAT CALIBRATION | 1 | |
| 835623-1 | CALIBRATION FIXTURE | 1 | |
| 8400K | CALIBRATION BLOCK - STANDARD | 7 | |
| 841-2518 | 150MM DIGITAL CALIBER METRIC AND IMPERIAL | 1 | |
| 84341 | 84341;3550 1 Yr Extended HW Warranty + ANSI No-Cert Calibrations | 1 | |
| 84342 | 84342;3550 1 Yr Extended HW Warranty + Certified Calibrations | 1 | |
| 84343 | 84343;3550 3 Yr Extended HW Warranty + ANSI No-Cert Calibrations | 1 | |
| 84344 | 84344;3550 3 Yr Extended HW Warranty + Certified Calibrations | 1 | |
| 84388 | 84388;PSD 1 Yr Extended HW Warranty + Certified Calibrations | 1 | |
| 84389 | 84389;PSD 3 Yr Extended HW Warranty + Certified Calibrations | 1 | |
| 85032B | TYPE N CALIBRATION KIT | 2 | |
| 85033D | CALIBRATION KIT | 1 | |
| 85033E | CALIBRATION KIT | 1 | |
| 85054D | CALIBRATION KIT | 1 | |
| 856A2699G01 | ENDOSCOPIC FPI CALIBRATION KIT - Optional | 1 | |
| 856A5563G02 | THERMAL CALIBRATION FIXT | 1 | |
| 856A5684G05 | CALIBRATION KIT | 1 | |
| 856A6631 | CALIBRATION MASTER | 1 | |
| 860135953100001 | TESTSET TEST SET - LANDING GEAR SAFETY (CALIBRATION) | 3 | |
| 860DSP-CAL | 860DSP-CAL;Certified Calibration 860 DSP | 1 | |
| 860DSP-FRR | 860DSP-FRR;Fixed Rate Repair and Calibration of 860 DSP | 1 | |
| 860DSPH-FRR | 860DSPH-FRR;Fixed Rate Repair and Calibration of 860 DSPH | 1 | |
| 860DSPI-CAL | 860DSPI-CAL;Certified Calibration 860 DSPI | 1 | |
| 860DSPI-D3-FRR | 860DSPI-D3-FRR;Fixed Rate Repair and Calibration of 860 DSPI DOCSIS 3 | 1 | |
| 860DSPI-FRR | 860DSPI-FRR;Fixed Rate Repair and Calibration of 860 DSPI | 1 | |
| 86472 | 86472;390XOPT040 Calibration | 1 | |
| 8676M3 | PALLET LOCK CALIBRATION TESTER | 1 | |
| 8731 CAL | CALIBRATION EQUIPMENT FOR TORQUING SYSTEM | 1 | |
| 8800-3 | 8800-3;3 Yr Total HW Warranty + Standard Calibrations - SILVER-3 | 1 | |
| 8800-3C | 8800-3C;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3C | 1 | |
| 8800-5 | 8800-5;5 Yr Total HW Warranty + Standard Calibrations - SILVER-5 | 1 | |
| 8800-5C | 8800-5C;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5C | 1 | |
| 8800-CAL | 8800-CAL;Calibration - 8800 | 1 | |
| 8800-CCIOD | 8800-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 8800 | 1 | |
| 8800-FRC | 8800-FRC;Fixed Rate Repair and Calibration - 8800 | 1 | |
| 886-2 | SOUND PRESSURE LEVEL CALIBRATOR | 8 | |
| 886-2/890-2 | SOUND LEVEL METER WITH CALIBRATOR | 1 | |
| 890-2 | CALIBRATOR SOUND LEVEL | 10 | |
| 9 | TEST TOOL (CALIBRATION) | 1 | |
| 890.2 | CALIBRATOR SOUND LEVEL | 10 | |
| 890−2 | Calibrator − Sound Level | 10 | |
| 896 | SOUND LEVEL METER CALIBRATOR | 1 | |
| 9000 | WAVETEK CALIBRATOR | 1 | |
| 9144 | TEMPERATURE CALIBRATOR | 1 | |
| 89766 | 89766;ALT-8015 1 Yr Extended HW Warranty + Certified Calibrations | 1 | |
| 89767 | 89767;ALT-8015 3 Yr Extended HW Warranty + Certified Calibrations | 1 | |
| 8AT,9124,300 | CALIBRATE WRENCH NUT M/R HUB | 1 | |
| 8TAA-982000 | CRONOMETRO DIGITAL, CALIBRADO | 1 | |
| 8TE65B00776 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY TOTALIZER | 1 | |
| 90-380034-1/935 | CALIBRATION ADAPTER TEST BOX | 1 | |
| 900 PPM | CALIBRATING OIL STANDARD 2 (8 OZ/ BOTTLE) | 1 | |
| 90000121 | AN/USM-719 TEST SET WITH 2 YRS CALIBRATION | 1 | |
| 901-13590-2-CAL | Calibration - Balance Propeller | 1 | |
| 901-4819-1 | CALIBRATOR | 1 | |
| 906-10272-1 | CALIBRATION UNIT - L | 1 | |
| 906-10272-5 | CALIBRATION UNIT - LOOP RESISTANCE TESTER | 4 | |
| 906-17460 | VXP/ EVXP CARRY ON KIT CALIBRATION; EVXP CARRY ON KIT; MODEL 17460 | 1 | |
| 91832 | 91832;CALFB3550 3550 Initial Factory Calibration Certificate; ISO 9001 | 1 | |
| 9080708 | CALIBRATION STANDARD SET (3 STDS) 20 TO 40 IACS (30 IACS); (42 IACS); (60 IACS) | 1 | |
| 9081003 | CALIBRATION STANDARD SET (2 STDS.) 4.4 MS/M (8 IACS);58 MS/M (100 IACS) | 1 | |
| 91-639 | BRIDGE - APU (CALIBRATION) | 2 | |
| 91/640 | HOIST KIT, A350 APU (CALIBRATION) | 1 | |
| 9104A-CAL | Calibration - Synchro Reader | 1 | |
| 92-770- 0212 | VOLTAGE CALIBRATION KIT | 1 | |
| 92-770-0212 | VOLTAGE CALIBIRATION KIT | 1 | |
| 9222305 | CALIBRATION STANDARD VM30889-C1A 480 KHZ CONDUCTIVITY PROBE | 1 | |
| 9240SI | LOOP DETECTOR 220V (CALIBRABLE) | 14 | |
| 9240SI-CAL | Calibration - Loop Controller | 1 | |
| 9264-980 | TEST AND CALIBRATION UNIT | 1 | |
| 9300A870 | Calibrated Sound Source | 1 | |
| 93051-CCIOD | 93051-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 93051 | 1 | |
| 932005-CCIOD | 932005-CCIOD;Certified Calibration with Incoming and Outgoing DATA - 932005 | 1 | |
| 94-0262-12-VA05 | CALIBRATION CONTROL PROGRAM | 1 | |
| 95-92070-0001 | CALIBER DE PUESTA A CERO TIMÓN DE DIRECCIÓN | 1 | |
| 95-92071-0001 | Calibre timon prof izq | 1 | |
| 95-92071-0002 | Calibre timon prof der | 1 | |
| 95-92083-0001 | calibre columna de mando | 1 | |
| 956A3323 | FIXTURE - CALIBRATION - DROP CHECK TOOL | 1 | |
| 956A6632 | SET - ENDOSCOPIC FPI CALIBRATION - BOOSTER - HPC - LPT BLADES | 1 | |
| 956A6632G01 | SET, ENDOSCOPIC FPI CALIBRATION - BOOSTER, HPC, LPT BLADES | 1 | |
| 956A6632G02 | SET, ENDOSCOPIC FPI CALIBRATION -BOOSTER, HPC, LPT BLADES | 1 | |
| 956A6633G01 | SET, ENDOSCOPIC FPI CALIBRATION -BOOSTER, HPC, LPT BLADES | 1 | |
| 9601-0002 | FACTORY ISO DIN9005 10 POINT CALIBRATION CERTIFICATE FOR EMA84 | 2 | |
| 972001 | CALIBRATED STEP BLOCK KIT | 1 | |
| 9744738 | MINIMITE SCANNER WITH FISCHER CONNECTOR, SCANNER CABLE, CASE, OPERATING MANUAL AND CALIBRATION CERTIFICATE | 5 | |
| 96521066 | CALIBRATING SYSTEM | 1 | |
| 96521086 | 7707-1-3W - W/SHOP TORQUE TESTER 0.2-10Nm (for calibrating torque screwdrivers) | 1 | |
| 97A27003000002 | GAGE GAGE,ASSY-PUSH-PULL (CALIBRATION) | 10 | |
| 97A27003000007 | GAGEASSY GAGE ASSY- PUSH-PULL (LLOYD) (CALIBRATION) | 21 | |
| 97F32001001000 | CONTROL CONTROL UNIT-LEG FREE FALL ACTU (CALIBRATION) | 5 | |
| 97F52001000020-CAL | Calibration - Test Set Proximity Sensor | 1 | |
| 98-12 | SPIRIT LEVEL (12 INCH). MUST BE ABLE TO BE CALIBRATED TO A VALUE OF ± 0.1 DEGREE. | 1 | |
| 981-102 | ANGLE CALIBRATION BLOCKS SET | 1 | |
| 9884370025 | TOOL-AUTOMATIC CALIBRATION | 1 | |
| 9891064003 | Calibrator for Battery Charger / Analyzers | 3 | |
| 9891064004 | CALIBRATOR FOR BATTERY CHARGER-ANALYZERS MODEL VCM-100 | 2 | |
| 98A2 | WATER DRAIN PURGER (CALIBRATION) | 7 | |
| 98A28104031001 | WATER DRAIN PURGER (CALIBRATION) | 10 | |
| 98A32101508000-CAL | Calibration - Clamp Hoisting | 1 | |
| 98A52003000 | CALIBRATION STANDARD | 1 | |
| 98A52003000000 | CALIBRATION-STANDARD | 1 | |
| 98A52003001 | CALIBRATION STANDARD | 1 | |
| 98A52003001000 | CALIBRATION-STANDARD | 1 | |
| 98A52003002000 | CALIBRATION-STANDARD | 1 | |
| 98A52003004 | CALIBRATION STANDARD | 1 | |
| 98A52003004000 | CALIBRATION-STANDARD | 1 | |
| 98A52003005000 | CALIBRATION-STANDARD | 1 | |
| 98A53003001000 | CALIBRATION STANDARD | 1 | |
| 98A53003002 | CALIBRATION STANDARD | 1 | |
| 98A53003002000 | CALIBRATION STANDARD | 1 | |
| 98A53003003 | CALIBRATION STANDARD | 1 | |
| 98A53003003000 | CALIBRATION STANDARD | 1 | |
| 98A53003004000 | CALIBRATION STANDARD | 1 | |
| 98A53003005 | CALIBRATION STANDARD | 1 | |
| 98A53003005000 | CALIBRATION STANDARD | 1 | |
| 98A53003006 | CALIBRATION STANDARD | 1 | |
| 98A53003006000 | CALIBRATION STANDARD | 1 | |
| 98A53003007 | CALIBRATION STANDARD | 1 | |
| 98A53003007000 | CALIBRATION STANDARD | 1 | |
| 98A53003008 | CALIBRATION STANDARD | 1 | |
| 98A53003008000 | CALIBRATION STANDARD | 1 | |
| 98A53153000000 | CALIBRATION STANDARD | 1 | |
| 98A53403001000 | CALIBRATION-STANDARD | 1 | |
| 98A53403002000 | CALIBRATION-STANDARD | 1 | |
| 98A53403003000 | CALIBRATION-STANDARD | 1 | |
| 98A53603000000 | CALIBRATION-STANDARD | 1 | |
| 98A53603001000 | CALIBRATION STANDARD | 1 | |
| 98A53603001100 | CALIBRATION STANDARD | 1 | |
| 98A53603001101 | CALIBRATION STANDARD | 1 | |
| 98A53603002000 | CALIBRATION-STANDARD | 1 | |
| 98A53703512000 | CALIBRATION STANDARD | 1 | |
| 98A53803002000 | CALIBRATION STANDARD | 1 | |
| 98A53803004000 | STANDARD-CALIBRATION | 1 | |
| 98A53803006000 | CALIBRATION-STANDARD | 2 | |
| 98A53803012000 | CALIBRATION-STANDARD | 1 | |
| 98A53803013000 | CALIBRATION-STANDARD | 1 | |
| 98A53803014000 | CALIBRATION-STANDARD | 1 | |
| 98A53803014001 | CALIBRATION-STANDARD | 3 | |
| 98A53803015000 | CALIBRATION-STANDARD | 1 | |
| 98A53803016 | CALIBRATION STANDARD | 1 | |
| 98A53803016000 | CALIBRATION-STANDARD | 1 | |
| 98A53803017000 | CALIBRATION-STANDARD | 1 | |
| 98A53803018000 | CALIBRATION-STANDARD | 2 | |
| 98A53803019000 | CALIBRATION-STANDARD | 3 | |
| 98A53803020000 | CALIBRATION-STANDARD | 3 | |
| 98A53803501000 | CALIBRATION BLOCK | 1 | |
| 98A53P03020000 | CALIBRATION BLOCK | 1 | |
| 98A54003018000 | CALIBRATION-STANDARD | 1 | |
| 98A54003019000 | CALIBRATION-STANDARD | 1 | |
| 98A54003069000 | CALIBRATION STANDARD | 2 | |
| 98A54003072000 | CALIBRATION STANDARD | 2 | |
| 98A54003073000 | CALIBRATION STANDARD | 3 | |
| 98A54003074000 | CALIBRATION-STANDARD | 3 | |
| 98A54003075 | CALIBRATION STANDARD | 2 | |
| 98A54003075000 | CALIBRATION-STANDARD | 1 | |
| 98A54003077 | CALIBRATION STANDARD | 2 | |
| 98A54003077000 | CALIBRATION-STANDARD | 1 | |
| 98A54003078000 | CALIBRATION-STANDARD | 1 | |
| 98A54003079000 | CALIBRATION-STANDARD | 1 | |
| 98A54003095000 | CALIBRATION-STANDARD | 1 | |
| 98A54003096000 | CALIBRATION-STANDARD | 3 | |
| 98A54003097000 | CALIBRATION-STANDARD | 2 | |
| 98A54003098000 | CALIBATION-STANDARD | 1 | |
| 98A54403024003 | ADAPTOR-DYNAMOMETRIC AT RIB 1 (CALIBRATION) | 10 | |
| 98A54603005000 | TORQUE TORQUE,TOOL-RIB18, SPHERICAL BE (CALIBRATION) | 11 | |
| 98A54603006000 | CALIBRATION-STANDARD | 1 | |
| 98A54603007000 | EQUIPMENT FOR CALIBRATION | 1 | |
| 98A54603008100 | CALIBRATION-STANDARD | 1 | |
| 98A54603008101 | CALIBRATION-STANDARD | 1 | |
| 98A55308741001-CAL | Calibration - Sling | 1 | |
| 98A57103006000 | CALIBRATION STANDARD | 1 | |
| 98A57103007000 | CALIBRATION-STANDARD | 1 | |
| 98A57103008000 | CALIBRATION STANDARD | 1 | |
| 98A57103009000 | CALIBRATION-STANDARD | 2 | |
| 98A57103010000 | CALIBRATION-STANDARD | 1 | |
| 98A57103011000 | CALIBRATION-STANDARD | 1 | |
| 98A57103012000 | CALIBRATION-STANDARD | 1 | |
| 98A57103013000 | CALIBRATION STANDARD | 19 | |
| 98A57103015000 | CALIBRATION STANDARD | 1 | |
| 98A57103016000 | CALIBRATION-STANDARD | 1 | |
| 98A57103017 | CALIBRATION STANDARD | 1 | |
| 98A57103017000 | CALIBRATION-STANDARD | 1 | |
| 98A57103020000 | CALIBRATION STANDARD | 1 | |
| 98A57103021000 | CALIBRATION-STANDARD | 1 | |
| 98A57103021100 | CALIBRATION STANDARD | 1 | |
| 98A57103021101 | CALIBRATION STANDARD | 1 | |
| 98A57103021102 | CALIBRATION STANDARD | 1 | |
| 98A57103021104 | CALIBRATION STANDARD | 1 | |
| 98A57103021106 | CALIBRATION STANDARD | 1 | |
| 98A57103021108 | CALIBRATION STANDARD | 1 | |
| 98A57103021109 | CALIBRATION STANDARD | 1 | |
| 98A57103021110 | CALIBRATION STANDARD | 1 | |
| 98A57103022000 | CALIBRATION STANDARD | 1 | |
| 98A57103023000 | CALIBRATION STANDARD | 1 | |
| 98A57103025000 | CALIBRATION STANDARD | 1 | |
| 98A57103025001 | CALIBRATION STANDARD | 1 | |
| 98A57103026000 | CALIBRATION STANDARD | 1 | |
| 98A57103027000 | CALIBRATION STANDARD | 1 | |
| 98D07104081001 | JACKING JACKING PAD SET (CALIBRATION) | 4 | |
| 98D07203000048 | MOORING MOORING FITTING, FRAME 62 63 (L (CALIBRATION) | 13 | |
| 98D07203000049 | MOORING MOORING FITTING, FRAME 62 63 (R (CALIBRATION) | 14 | |
| 98D2 | LOCKING MECHANISM (CALIBRATION) | 7 | |
| 98D262030 | EXTINGUISHING FIRE TEST CFM LEAP X (CALIBRATION) | 7 | |
| 98D26203006002 | EXTING. FIRE TEST PW 1100 (CALIBRATION) | 4 | |
| 98D27504014000 | calibre | 11 | |
| 98D27504015000 | calibre | 7 | |
| 98D27504084000 | EXTRACTR EXTRACTOR - PIN, TRACK 4 (CALIBRATION) (CALIBRATION) | 22 | |
| 98D28 | PIPE PIPE ADAPTING-WATER DRAINING (CALIBRATION) | 7 | |
| 98D28108299002 | GUIDEGUIDE-RI,ADDITIONALCENTERTAN(CALIBRATION)(CALIBRATION) | 12 | |
| 98D51407291001 | CALIBRATION BLOCK SET | 1 | |
| 98D53103022000 | SATCOM IRIDIUM ANTENNA DRILLING (CALIBRATION) | 1 | |
| 98D53203001000 | TOOL STATIC PART REWORK (CALIBRATION) | 2 | |
| 98D53308001 | REAMING TOOL, SET (CALIBRATION) | 1 | |
| 98D53308001000 | REAMING TOOL, SET (CALIBRATION) | 5 | |
| 98D54403002000 | REMINST REM INST TOOL - SPIGOT BALL JOI (CALIBRATION) | 19 | |
| 98D54403003000 | APF TOOL REPAIR (CALIBRATION) | 6 | |
| 98D56003001000 | WINDSHIELD INSPECTION (CALIBRATION) | 4 | |
| 98D56003001001 | HARNESS LR AND WB (CALIBRATION) | 3 | |
| 98D56003001002 | WINDSHIELD INSPECTION (CALIBRATION) | 2 | |
| 98D57304002000 | HOIST SHARKLET (CALIBRATION) | 10 | |
| 98D71203010000_RTST | BOOTSTRAP SYSTEM CFM (RETURN TO SERVICE TEST) (CALIBRATION) | 1 | |
| 98D71203029000 | R/I ENGINE MOUNT BEARING A320 NEO (CALIBRATION) | 2 | |
| 98D71203501001 | BOOTSTRAP SYSTEM A320 (DIMENSIONAL TEST) (CALIBRATION) | 31 | |
| 98DNSA20208120 | LOCKINGBOLT(CALIBRATION)(CALIBRATION) | 18 | |
| 98F07103000000 | SAFETY WARNING KIT TAIL JACK (CALIBRATION) | 1 | |
| 98F09101002000 | CABLE CABLE,TOWING-MLG (CALIBRATION) | 2 | |
| 98F20003000000 | TEST RADOM CALIBRATION | 1 | |
| 98F21503001000 | CRADLE CRADLE R I-PACK EXCHANGER (CALIBRATION) | 6 | |
| 98F21503001001 | LIFT LIFT,R I-PACK EXCHANGER (CALIBRATION) | 5 | |
| 98F26208551000 | TROLLEY TROLLEY-FIRE EXTINGUISHER BOTTL (CALIBRATION) | 13 | |
| 98F27508211005 (CALIB) | OPTICAL SET-OPTICAL ALIGNMENT,FLAPS (CALIBRATION) | 1 | |
| 98F29208457000 | PIN PIN-SAFETY,RAT (CALIBRATION) | 18 | |
| 98F32001006000 | GEARFILL GEAR FILLING KIT S-ABSOR (CALIBRATION) | 13 | |
| 98F32104009001 | HOISTEQP HOIST EQUIPMENT - PINTLE PIN (W (CALIBRATION) | 9 | |
| 98F71201006034 | BOOTSTRP BOOTSTRAP SYSTEM-A330 GE (DIMENSIONAL TEST) (CALIBRATION) | 16 | |
| 98K7830H023-000 | THRUST REVERSER OPEN PUMP CALIBRATION CALIBRATI | 1 | |
| 98L34001000000 | SUPPORT TOOL-STANDBY COMPASS CALIBRATOR | 4 | |
| 98L34001000000 | SUPPORT TOOL-STANDBY COMPASS CALIBRATOR | 4 | |
| 98L34103000200 | CALIBRATED THREAD HOLDER | 1 | |
| 98L36103003000 | FLOWMETER (CALIBRATION) | 6 | |
| 98L36109001001 | PCE LEAK TEST SET (CALIBRATION) | 1 | |
| 98L57004028000 | GEAR RIB BORING A380 (CALIBRATION) | 1 | |
| 98L7100H004-000 | STRUT STRUT, HOLD OPEN - TR TO PYLON (CALIBRATION) | 2 | |
| 98S24905000000-CAL | Calibration - Electronic Bonding Kit | 1 | |
| 98S27003003000 | CALIBRATION-TOOL | 10 | |
| 98S27005002002-CAL | Calibration - Synchro reader | 1 | |
| 98S27005003000-CAL | Calibration - Flap Control Box | 1 | |
| 98S27005004110 | CALIBER | 1 | |
| 98S27005004110/306 | CALIBRATION TOOL | 1 | |
| 98S27005004205 | CALIBER | 1 | |
| 98S27005004221 | CALIBER | 1 | |
| 98S27005004221/205 | CALIBRATION TOOL | 1 | |
| 98S27005004306 | CALIBER | 1 | |
| 98S27008009006-CAL | Calibration - Jig. Flap Checking | 1 | |
| 98S27008009007-CAL | Calibration - Jig. R/H Elevator Checking | 1 | |
| 98S31005000000-CAL | Calibration - Alpha Probe Harness | 1 | |
| 98S31405000001-CAL | Calibration - MFC Phobos Kit | 1 | |
| 98S34203000000-CAL | Calibration - Tool Compensation Synchrometer | 1 | |
| 98S51605000-200 | STANDARD, CALIBRATED ASSEMBLY | 1 | |
| 98S51605001-2-18 | CALIBRATION STANDARD | 3 | |
| 98S51605001-200 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 2024T3 | 4 | |
| 98S51605001-202 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 15-5PH | 3 | |
| 98S51605001-204 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 TA6V | 3 | |
| 98S51605001-206 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 | 3 | |
| 98S51605001-208 | Calibration Standard, ATR72 51-60-00 PT6:PG628 FIG615 | 3 | |
| 98S51605001-212 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of C... | 4 | |
| 98S51605001-214 | ATR REFERENCE STANDARD 15-5PH Steel PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of Confo... | 4 | |
| 98S51605001-216 | ATR REFERENCE STANDARD ..TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certifica... | 3 | |
| 98S51605001-218 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certificat... | 3 | |
| 98S51605001-220 | ATR REFERENCE STANDARD PT 6 51-60-00 15-5PH stainless steel Calibration Standard for Rotary Probes Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certifi... | 4 | |
| 98S51605001-222 | ATR REFERENCE STANDARD TA6V(6AL-4V) Titanium PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Cert... | 3 | |
| 98S51605001-224 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 2024T3 | 4 | |
| 98S51605001-226 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 15-5PH | 3 | |
| 98S51605001-228 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 TA6V | 3 | |
| 98S51605001-230 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 2024T3 | 4 | |
| 98S51605001-232 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 15-5PH | 3 | |
| 98S51605001-234 | Calibration Standard, ATR72 PT6 51-60-00:PG630 FIG616 SHEET2 TA6V | 3 | |
| 98S51605001000 | Calibration Template Std | 2 | |
| 98S51605001200 | CALIBRATION TOOL | 4 | |
| 98S51605001202 | CALIBRATION TOOL | 3 | |
| 98S51605001204 | CALIBRATION TOOL | 3 | |
| 98S51605001206 | CALIBRATION TOOL | 3 | |
| 98S51605001208 | CALIBRATION TOOL | 3 | |
| 98S51605001212 | CALIBRATION TOOL | 4 | |
| 98S51605001212-REVE | CALIBRATION TOOL | 1 | |
| 98S51605001214 | CALIBRATION TOOL | 4 | |
| 98S51605001216 | CALIBRATION TOOL | 3 | |
| 98S51605001218 | CALIBRATION TOOL | 3 | |
| 98S51605001218-REVE | CALIBRATION TEMPLATE STANDARD | 1 | |
| 98S51605001220 | CALIBRATION TOOL | 4 | |
| 98S51605001222 | CALIBRATION TOOL | 3 | |
| 98S51605001224 | CALIBRATION TOOL | 4 | |
| 98S51605001226 | CALIBRATION TOOL | 3 | |
| 98S51605001228 | CALIBRATION TOOL | 3 | |
| 98S51605001230 | CALIBRATION TOOL | 4 | |
| 98S51605001232 | CALIBRATION TOOL | 3 | |
| 98S51605001234 | CALIBRATION TOOL | 3 | |
| 98S51605002200 | NDT CALIBRATION STANDARD | 1 | |
| 98S52305004-200 | CALIBRATION STANDARD | 3 | |
| 98S52305004-202 | CALIBRATION STANDARD | 3 | |
| 98S52305004200 | Fwd Pax Door Debond Calibr | 3 | |
| 98S52305004202 | Fwd Pax Door Debond Calibr | 3 | |
| 98S52305005-000 | Calibration Standard, ATR42 PT4 52-31-04:PG404 FIG401 | 4 | |
| 98S52305005-002 | Calibration Standard, ATR72 PT4 52-31-04:PG411 FIG402 | 1 | |
| 98S52305005000 | Calibration Tool | 4 | |
| 98S52305005000-REVB | CALIBRATION TOOL | 1 | |
| 98S52305005002 | CALIBRATION TOOL INSPECTION | 1 | |
| 98S52305008-200 | Calibration Standard, ATR42-400/500 PT6 52-31-04:PG603 FIG601 | 2 | |
| 98S52305008200 | CALIBRATION STANDARD | 2 | |
| 98S52305009-000 | CALIBRATION STANDARD | 1 | |
| 98S52305017000 | CALIBRATION STANDARD | 1 | |
| 98S523104-ATR72/42 | Calibration Standard, ATR72 PT6 52-31-04: PG603 FIG601, SB52-1057 or SB52-1058 | 1 | |
| 98S53005004200 | CALIBRATION STANDARD | 1 | |
| 98S53005004202 | CALIBRATION STANDARD | 1 | |
| 98S53005005 | Calibration Standard, ATR42 PT6 53-61-03:PG607 FIG601 SHT2 | 1 | |
| 98S53005005-000 | Calibration Standard, ATR42 PT6 53-31-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005005000 | Skin Lap Joint Calibration | 3 | |
| 98S53005005002 | CALIBRATION TOOL | 1 | |
| 98S53005006-000 | Calibration Standard, ATR42 PT6 53-31-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005006000 | Skin Lap Joint Calibration | 3 | |
| 98S53005007-000 | Calibration Standard, ATR42 PT6 53-31-04:PG606 FIG601 SHT1 | 2 | |
| 98S53005007000 | Skin Lap Joint Calibration | 2 | |
| 98S53005008-000 | Calibration Standard, ATR42 PT6 53-31-21:PG608 FIG601 SHT1 | 3 | |
| 98S53005008000 | Skin Lap Joint Calibration | 3 | |
| 98S53005009-000 | Calibration Standard, ATR42 PT6 53-51-02:PG608 FIG601 | 3 | |
| 98S53005009000 | Skin Lap Joint Calibration | 3 | |
| 98S53005010-000 | Calibration Standard, ATR42 PT6 53-51-03:PG606 FIG601 | 3 | |
| 98S53005010000 | Skin Lap Joint Calibration | 3 | |
| 98S53005011-000 | Calibration Standard, ATR42 PT6 53-61-01:PG606 FIG601 SHT1 | 3 | |
| 98S53005011000 | Skin Lap Joint Calibration | 3 | |
| 98S53005012 | Calibration Standard, ATR42 PT6 53-61-03:PG606 FIG601 | 1 | |
| 98S53005012-000 | ATR CALIBRATION STANDARD Part 6 53-81-14 Page 606 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005012000 | Skin Lap Joint Calibration | 3 | |
| 98S53005013-000 | ATR CALIBRATION STANDARD Part 6 53-81-14 Page 607 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005013000 | Skin Lap Joint Calibration | 3 | |
| 98S53005014-000 | Calibration Standard, ATR42 PT4 53-56-52:PG405-408 FIG402 | 3 | |
| 98S53005014-000A | Calibration Standard, ATR42 PT4 53-56-52:PG406 FIG402 SHT2 | 1 | |
| 98S53005014-000B | Calibration Standard, ATR42 PT4 53-56-52:PG407 FIG402 SHT3 | 1 | |
| 98S53005014-000C | Calibration Standard, ATR42 PT4 53-56-52:PG408 FIG402 SHT4 | 1 | |
| 98S53005014-000D | Calibration Standard, ATR42 PT4 53-56-52:PG408 FIG402 SHT4 | 1 | |
| 98S53005014-006 | STANDARD CALIBRATION TOOL | 1 | |
| 98S53005014000 | Skin Lap Joint Calibration | 3 | |
| 98S53005014002 | Skin Lap Joint Calibration | 2 | |
| 98S53005014004 | Skin Lap Joint Calibration | 2 | |
| 98S53005014006 | SKIN LAP JOINT CALIBRATION | 1 | |
| 98S53005014008 | SKIN LAP JOINT CALIBRATION STANDARD | 1 | |
| 98S53005014102 | CALIBRATION STANDARD | 1 | |
| 98S53005015-000 | Calibration Standard, ATR42 PT6 53-51-01:PG608 FIG601 | 3 | |
| 98S53005015000 | Skin Lap Joint Calibration | 3 | |
| 98S53005016-000 | ATR CALIBRATION STANDARD ATR42-400/500 Part 4 53-51-20 Page 407 Figure 402. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005016000 | Calibration FR20/27 Str10 | 3 | |
| 98S53005017-000 | Calibration Standard, ATR42 PT6 53-81-16:PG606 FIG601 | 3 | |
| 98S53005017000 | Skin Lap Joint Calibration | 3 | |
| 98S53005018-000 | Calibration Standard, ATR42 PT6 53-81-16:PG607 FIG601 | 3 | |
| 98S53005018000 | Skin Lap Joint Calibration | 3 | |
| 98S53005020-000 | Calibration Standard, ATR72 PT6 53-00-01:PAGE 608 FIG 601, Includes P1 thru P8 | 4 | |
| 98S53005020-000/1 | ATR CALIBRATION STANDARD ATR72 Part 6 53-00-01 Page 608 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53005020-000/2 | ATR CALIBRATION STANDARD ATR72 Part 6 53-00-01 Page 609 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S53005020-200 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-202 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-203 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-204 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-205 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-206 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-207 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-208 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005020-209 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-210 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-211 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-212 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-213 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-214 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-215 | ALUMINIUM PLATES CALIBRATION STANDARD | 1 | |
| 98S53005020-216 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020000 | CALIB. INSP. RECOVERY LONGITUDINAL FUSELAGE PANELS | 4 | |
| 98S53005021-000 | ATR72 Calibration Standard Drawing PT6 53-51-01 PG 608, Figure 601 | 3 | |
| 98S53005021000 | Skin Lap Joint Calibration | 3 | |
| 98S53005024-000 | ATR CALIBRATION STANDARD 53-61-03 PT6 PG 606 | 2 | |
| 98S53005024000 | Skin Lap Joint Calibration | 2 | |
| 98S53005025-000 | ATR CALIBRATION STANDARD 53-61-02 PT 6 PG 606 | 2 | |
| 98S53005025000 | Skin Lap Joint Calibration | 2 | |
| 98S53005026-000 | ATR CALIBRATION STANDARD 53-61-01-PT6 PG 606 | 2 | |
| 98S53005026000 | Skin Lap Joint Calibration | 2 | |
| 98S53005027-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-01 FIGURE 606 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005027000 | Skin Lap Joint Calibration | 2 | |
| 98S53005028-000 | ATR CALIBRATION STANDARD 53-31-04 PT 6 PG 606 | 2 | |
| 98S53005028000 | Skin Lap Joint Calibration | 2 | |
| 98S53005029-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-01 FIGURE 601 SHEET 1. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005029000 | Skin Lap Joint Calibration | 2 | |
| 98S53005030-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-21 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005030000 | Skin Lap Joint Calibration | 2 | |
| 98S53005031-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-31-04 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005031000 | Skin Lap Joint Calibration | 2 | |
| 98S53005032-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-01 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005032000 | Skin Lap Joint Calibration | 2 | |
| 98S53005033-000 | ATR42-400/500 CALIBRATION STANDARD PART 6 53-61-02 FIGURE 601 SHEET 2. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005033000 | Skin Lap Joint Calibration | 2 | |
| 98S53105000-200 | Calibration Standard, ATR42 PT6 53-11-23:PG612 FIG603 | 2 | |
| 98S53105000200 | Node 5 Widsh Calibration | 2 | |
| 98S53105002000 | CALIBRATION TOOL NDT | 2 | |
| 98S53305002 | CARGO DOOR LATCH CALIBR. | 1 | |
| 98S53305002-200 | CARGO DOOR LATCH CALIBR. | 4 | |
| 98S53305002200 | Cargo Door Latch Calibr. | 4 | |
| 98S53305003000 | CALIBRATION STANDARD | 1 | |
| 98S53305004-000 | Calibration Standard, Bonded, ATR72 PT4 53-31-01:PG404 FIG401 | 5 | |
| 98S53305004000 | Skin Str Calibration | 5 | |
| 98S53305005-000 | Calibration Standard, Bonded, ATR72 PT4 53-31-21:PG404 FIG401 | 5 | |
| 98S53305005000 | Skin Str Calibration | 5 | |
| 98S53305006-000 | CALIBRATION STANDARD | 3 | |
| 98S53305006-001 | CALIBRATION STANDARD | 1 | |
| 98S53505002000 | FRAMEWORK FOR INSPECT CALIBRATION FORT SMOOTH 10 | 1 | |
| 98S53505003-200 | Calibration Standard, ATR72 PT4 53-56-0: PG405 FIG 402 | 4 | |
| 98S53505003000 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S53505003200 | FR25/27 Upper Lug Calibr. | 4 | |
| 98S53505004000 | SKIN CALIBRATION STANDARD STRG;11 AND STRG;17 | 1 | |
| 98S53505005000 | SKIN CALIBRATION STANDARD STRG.4 | 1 | |
| 98S53505006-000 | Calibration Standard, ATR72 PT4 53-51-23:PG408 FIG 403 | 4 | |
| 98S53505006000 | Pressure Plate Calibration | 4 | |
| 98S53505006202 | PRESS. PLATE FR. 25 / FR. 27-INTERNAL CALIBRATION | 1 | |
| 98S53605002000 | CALIBRATION STANDARD STR.3, 11ET17 | 1 | |
| 98S53805002 | CALIBRATION STANDARD | 1 | |
| 98S53805002-000 | Calibration Standard, ATR42 PT6 53-61-18:PG609 FIG603 | 6 | |
| 98S53805002000 | CALIBRATION STANDARD | 6 | |
| 98S53805003000 | SKIN CALIBRATION STANDARD STR.4 AND 17 | 1 | |
| 98S54005020200 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020202 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020204 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020206 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020208 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020210 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020212 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020214 | NDT CALIBRATION STANDARD | 1 | |
| 98S54005020216 | NDT CALIBRATION STANDARD | 1 | |
| 98S54305001-200 | Calibration Standard, ATR42 PT4 54-31-70 PG403 FIG 401 | 4 | |
| 98S54305001-202 | Calibration Standard, ATR42 PT4 54-31-70 PG409 FIG 401 | 4 | |
| 98S54305001200 | Under Wing Box Calibration | 4 | |
| 98S54305001202 | Under Wing Box Calibration | 4 | |
| 98S54305002-200 | Calibration Standard, ATR72 PT4 54-31-70 PG403 FIG 401 | 5 | |
| 98S54305002200 | CALIBRATION BLOCK | 5 | |
| 98S543050022000 | FRAMEWORK FOR INSPECT CALIBRATION FORT SMOOTH 10 | 1 | |
| 98S55305011-000 | CALIBRATION STANDARD | 2 | |
| 98S55305011-0003 | CALIBRATION BLOCK | 1 | |
| 98S55305011-100 | CALIBRATION BLOCK | 1 | |
| 98S55305011000 | CALIBRATION STANDARD | 2 | |
| 98S57003013044-CAL | Calibration - Jig Aileron Checking | 1 | |
| 98S57003013045-CAL | Calibration - Jig Aileron Checking | 1 | |
| 98S57003018040-CAL | Calibration - Jig Flap Checking | 1 | |
| 98S57003018041-CAL | Calibration - Jig Flap Checking | 1 | |
| 98S57105000000 | FRAMEWORK FOR INSPECT CALIBRATION FORT SMOOTH 10 | 1 | |
| 98S57105000200 | CALIBRATION TOOL INSPECTION | 1 | |
| 98S57105001000 | FRAMEWORK FOR INSPECT CALIBRATION FORT SMOOTH 10 | 1 | |
| 98S57105001200 | CALIBRATION TOOL INSPECTION | 1 | |
| 98S57105002000 | CALIBRATION TOOL | 1 | |
| 98S57105003-200 | Calibration Standard, ATR42 PT4 57-15-21:PG404 FIG401 | 4 | |
| 98S57105003200 | CALIBRATION STANDARD | 4 | |
| 98S57105004-200 | Calibration Standard, ATR72 PT4 57-15-21 PG403 FIG 401 | 4 | |
| 98S57105005-200 | Calibration Standard, ATR42 PT4 57-12-11:PG404 FIG401 | 4 | |
| 98S57105005200 | CALIBRATION STANDARD | 4 | |
| 98S57105006-200 | Calibration Standard, ATR72 PT4 57-12-11 PG404 Figure 401 | 3 | |
| 98S57105007-200 | Calibration Standard, ATR42 PT4 57-14-03:PG403 FIG401 | 2 | |
| 98S57105009-200 | Calibration Standard, ATR42 PT4 57-15-10:PG403 FIG401 | 2 | |
| 98S57105010-200 | Calibration Standard, ATR72 57-15-10 PT4:PG404 FIG402 | 3 | |
| 98S57105010200 | CALIBRATION BLOCK | 3 | |
| 98S57105010201 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105011-200 | Calibration Standard, ATR42 PT4 57-15-11:PG403 FIG401 | 3 | |
| 98S57105012-200 | Calibration Standard, ATR72 PT4 57-15-11 PG403 FIG 401 | 3 | |
| 98S57105012200 | CALIBRATION BLOCK | 3 | |
| 98S57105013000 | REAR SPAR LOWER SURFACE CALIBRATION STANDARD | 4 | |
| 98S57105013004 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105014001 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105014002 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105014003 | CALIBRATION TOOL STANDARD NDT | 2 | |
| 98S57105015 | Calibration Standard Drawing 57-14-03, Figure 401 | 1 | |
| 98S57105015-200 | CALIBRATION STANDARD | 3 | |
| 98S57105016-200 | ATR CALIBRATION STANDARD Part 6 57-14-04 Page 603 Figure 601. Material: Plexiglass. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105019-200 | ATR CALIBRATION STANDARD Part 6 57-14-01 Page 603 Figure 601. Material: 2024-T3. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57105019000 | CALIBRATION TOOL STANDARD NDT | 1 | |
| 98S57105019200 | Calibr. Center Wing Box | 3 | |
| 98S57105030-200 | Calibration Standard. ATR42 PT4 57-12-12:PG404 FIG401 | 4 | |
| 98S57105030000 | CALIBRATION STANDARD | 1 | |
| 98S57105030200 | Rr Spar-Flange Calibration | 4 | |
| 98S57105031-200 | RR SPAR-FLANGE CALIBRATION | 2 | |
| 98S57105031000 | CALIBRATION STANDARD | 1 | |
| 98S57105031200 | Rr Spar-Flange Calibration | 2 | |
| 98S57105032-200 | ATR72 Calibration Standard Drawing PT4 57-12-12 PG 404, Figure 401 | 3 | |
| 98S57105032-202 | ATR72 Calibration Standard Drawing PT4 57-12-12 PG 405, Figure 402 | 3 | |
| 98S57105032200 | Rr Spar-Flange Calibration | 3 | |
| 98S57105032202 | Rr Spar-Flange Calibration | 3 | |
| 98S57105033-200 | RR SPAR-FLANGE CALIBRATION | 1 | |
| 98S57105033200 | Rr Spar-Flange Calibration | 1 | |
| 98S57105034200 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S57105037-000 | Calibration Standard. ATR42 PT4 57-14-00:PG403 FIG401 | 1 | |
| 98S57105037000 | Lower Pan. RIB9/10 Calibr. | 1 | |
| 98S57105041200 | Lower Pan. RIB9/10 Calibr. | 1 | |
| 98S571400 | Calibration Standard, ATR42 PT6 52-14-00:PG603 FIG601 | 1 | |
| 98S57203000000 | CALIBRATION | 1 | |
| 98S57205011000 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S57205019000 | CALIBRATION STANDARD | 1 | |
| 98S57205023-000 | Calibration Standard, 57-15-06, Part 4, Page 403 Fig 401 | 1 | |
| 98S57205027200 | Low Panel RIB15/18 Calibr | 3 | |
| 98S57205027202 | Low Panel RIB15/18 Calibr | 3 | |
| 98S57205029000 | CALIBRATION STANDARD FOR SSI -57-12-12 | 1 | |
| 98S57205030-001 | CALIBER | 4 | |
| 98S57205030-002 | CALIBRATION STANDARD | 3 | |
| 98S57205030-003 | CALIBRATION STANDARD | 2 | |
| 98S57205030-004 | CALIBRATION STANDARD | 5 | |
| 98S57205030-005 | CALIBRATION STANDARD | 2 | |
| 98S57205030.000 | CALIBRATION BLOCK | 3 | |
| 98S57205030.001 | CALIBRATION STANDARD | 4 | |
| 98S57205030.002 | CARBON CALIBRATION STANDART | 3 | |
| 98S57205030.003 | CALIBRATION STANDARD | 2 | |
| 98S57205030.004 | CALIBRATION STANDARD | 5 | |
| 98S57205030.005 | CALIBER | 2 | |
| 98S57205030000 | Wing Upper Panel Calibr | 3 | |
| 98S57205030001 | CARBON CALIBRATION STANDARD | 4 | |
| 98S57205030002 | CALIBRATION TOOL | 3 | |
| 98S57205030003 | CALIBRATION TOOL | 2 | |
| 98S57205030004 | CARBON CALIBRATION STANDARD | 5 | |
| 98S57205030005 | CALIBRATION TOOL | 2 | |
| 98S57505001000 | CALIBER | 1 | |
| 98V07101000000 | JACKING-NOSE FITTING (CALIBRATION) (CALIBRATION) | 6 | |
| 98V27301000000 | Elevator neutral position calibration tool | 5 | |
| 98V27508799000 | GRA end stop calibration pin | 6 | |
| 98V55109003000 | BAR SUPPORT - THS, FR102 (CALIBRATION) | 3 | |
| 98V5510901500 | LLF REPAIR TOOL - HTTP (CALIBRATION) | 1 | |
| 99-8058-4000 | Calib. Kit Lift Transducer | 5 | |
| 990-4 | LIFT TRANSDUCER FORCE APPLICATOR (Requires Calibration) | 8 | |
| 990.00.00.819 | QUICK CALIBRATOR | 1 | |
| 990.00.00.830 | TEST SET, PRESSURE CALIBRATOR | 1 | |
| 990.00.00.839 | PRESSURE CALIBRATOR | 1 | |
| 990.00.00.858 | CALIBRATOR | 1 | |
| 990.00.00.864 | PRESSURE CALIBRATOR TEST SET | 1 | |
| 99032A01 | TEMPERATURE CALIBRATION | 1 | |
| 9912 | TEST SET BLEED - KIT (CALIBRATION) | 1 | |
| 99127-1100 | BLEED TEST SET ELECTRICAL SUPPLY ADAPTOR (CALIBRATION) | 1 | |
| 99127-231 | TEST SET BLEED - KIT (CALIBRATION) | 2 | |
| 99127B04 | BLEED TEST SET (CALIBRATION) | 1 | |
| 9970-958-579 | CALIBRATION BLOCK | 1 | |
| 999-6807-02 | US REFERENCE STANDARD, EQUIPMENT CALIBRATION PART | 1 | |
| 999-6807-03 | US REFERENCE STANDARD, EQUIPMENT CALIBRATION | 1 | |
| 999430 | CALIBRATION KIT | 1 | |
| 99A-510-03000-000 | Calibration Standard NDT | 2 | |
| 99A14144-101 | ET CALIBRATION TEST STANDARDS | 1 | |
| 99A14144−101 | CALIBRATION TEST STANDARDS FOR HFEC AND LFEC INSPE | 1 | |
| 99A14145-011 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| 99A14145-101 | ET CALIBRATION TEST STANDARDS | 1 | |
| 99A14145−011 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| 99A51003000000 | CALIBRATION BLOCK | 2 | |
| 99A51107299001 | Calibration Block | 5 | |
| 99A51107300000 | STANDARD, CALIBRATON | 5 | |
| 99A51107399001 | Calibration Block | 1 | |
| 99A51307303000 | STANDARD, CALIBRATION | 1 | |
| 99A530003001101 | CALIBRATION BLOCK ALUMINUM | 1 | |
| 99A53003001000 | CALIBRATION STANDARD | 1 | |
| 99A53003001001 | CALIBRATION STANDARD | 1 | |
| 99A53003001100 | CALIBRATION STANDARD | 4 | |
| 99A53003001101 | CALIBRATION STANDARD | 8 | |
| 99A53003001102 | CALIBRATION STANDARD (STEEL 35NCD16) | 5 | |
| 99A53003001103 | CALIBRATION STANDARD (AL, AU4G OR 2017A) | 4 | |
| 99A53003001104 | CALIBRATION STANDARD (TI, TA6V) | 4 | |
| 99A53003001105 | CALIBRATION STANDARD (ST, 35NCD16) | 4 | |
| 99A53003001106 | CALIBRATION STANDARD (AL, AU4G OR 2017A) | 4 | |
| 99A53003001107 | CALIBRATION STANDARD (TI, TA6V) | 4 | |
| 99A53003001108 | CALIBRATION STANDARD (ST, 35NCD16) | 4 | |
| 99A53003003001101 | ROTARY CALIBRATION STANDARD ALUMINUM | 1 | |
| 99A5300305001 | CALIBRATION STANDARD | 1 | |
| 99A53103003000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 53-12-20 PAGE 407 FIGURE 403. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53107215000 | CALIBRATION STANDARD | 5 | |
| 99A53107230000 | STANDARD, CALIBRATION | 1 | |
| 99A53107243000 | CALIBRATION STANDARD | 1 | |
| 99A53107251000 | CALIBRATION STANDARD | 2 | |
| 99A53107260000 | CALIBRATION STANDARD | 1 | |
| 99A53107265001 | CALIBRATION STANDARD | 1 | |
| 99A53107269000 | STANDARD, CALIBRATION | 1 | |
| 99A53107270000 | STANDARD, CALIBRATION | 1 | |
| 99A53107275000 | CALIBRATION STANDARD | 1 | |
| 99A53107282000 | STANDARD, CALIBRATION | 1 | |
| 99A53107283000 | CALIBRATION STANDARD | 2 | |
| 99A53107287000 | CALIBRATION STANDARD | 7 | |
| 99A53107290000 | Calibration Block | 1 | |
| 99A53307203000 | CALIBRATION STANDARD - | 1 | |
| 99A53307218000 | CALIBRATION STANDARD | 1 | |
| 99A53307225000 | CALIBRATION STANDARD | 1 | |
| 99A53307229000 | STANDARD, CALIBRATION | 1 | |
| 99A53307229001 | CALIBRATION STANDARD | 1 | |
| 99A53307233000 | CALIBRATION STANDARD | 1 | |
| 99A53307236000 | CALIBRATION STANDARD | 4 | |
| 99A53307244000 | CALIBRATION STANDARD | 1 | |
| 99A53307249000 | CALIBRATION STANDARD | 1 | |
| 99A53307257000 | CALIBRATION STANDARD | 1 | |
| 99A53307258000 | CALIBRATION STANDARD | 1 | |
| 99A53307264000 | CALIBRATION STANDARD SET | 1 | |
| 99A53307266000 | CALIBRATION STANDARD | 1 | |
| 99A53307267000 | STANDARD, CALIBRATION | 2 | |
| 99A53307267000 304 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307267000 7075T6 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material Aluminum 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307267000/7150-T6 | AIRBUS A300-600 CALIBRATION BLOCK | 1 | |
| 99A53307268000 | CALIBRATION JIG | 1 | |
| 99A53307274 000 | STANDARD, CALIBRATION | 5 | |
| 99A53307274000 | STANDARD, CALIBRATION | 5 | |
| 99A53307281000 | STANDARD, CALIBRATION | 2 | |
| 99A53307292000 | CALIBRATION BLOCK | 1 | |
| 99A53307292001 | Calibration Block | 4 | |
| 99A53307319000 | CALIBRATION BLOCK | 2 | |
| 99A53403000000 | CALIBRATION STANDARD | 1 | |
| 99A53403001000 | CALIBRATION STANDARD | 1 | |
| 99A53403003000 | CALIBRATION STANDARD | 1 | |
| 99A53403003001 | CALIBRATION STANDARD | 3 | |
| 99A53403004000 | CALIBRATION-STANDARD | 1 | |
| 99A53403005000 | CALIBRATION STANDARD | 1 | |
| 99A53407254000 | STANDARD, CALIBRATION | 1 | |
| 99A53407285000 | STANDARD, CALIBRATION | 1 | |
| 99A53507286000 | STANDARD, CALIBRATON | 2 | |
| 99A53803003000 | CALIBRATION STANDARD | 1 | |
| 99A53803020000 | CALIBRATION STANDARD | 1 | |
| 99A54003098000 | Calibration Block | 1 | |
| 99A55107213000 | CALIBRATION STANDARD | 1 | |
| 99A55107262000 | CALIBRATION STANDARD | 1 | |
| 99A55307306000 | STANDARD, CALIBRATION | 2 | |
| 99A55307328000 | CALIBRATION BLOCK - Fab. Stufenblock 80mm | 1 | |
| 99A55407291000 | CALIBRATION BLOCK | 5 | |
| 99A55507221000 | CALIBRATION STANDARD | 1 | |
| 99A55507222000 | CALIBRATION STANDARD | 1 | |
| 99A55507223000 | CALIBRATION STANDARD | 1 | |
| 99A55507240000 | CALIBRATION STANDARD | 1 | |
| 99A55507241000 | CALIBRATION STANDARD | 1 | |
| 99A55507242000 | CALIBRATION STANDARD | 1 | |
| 99A55507262000 | CALIBRATION STANDARD | 1 | |
| 99A57004001285 | CALIBRATION STANDARD | 2 | |
| 99A57004001286 | Calibration Block | 1 | |
| 99A57004001287 | CALIBRATION STANDARD | 1 | |
| 99A57004001288 | CALIBRATION STANDARD | 1 | |
| 99A57004001289 | CALIBRATION STANDARD | 1 | |
| 99A57004001290 | CALIBRATION STANDARD | 1 | |
| 99A57004001291 | CALIBRATION STANDARD | 1 | |
| 99A57004001292 | CALIBRATION STANDARD | 2 | |
| 99A57004001296 | CALIBRATION STANDARD | 1 | |
| 99A57004001297 | CALIBRATION STANDARD | 1 | |
| 99A57004001300 | CALIBRATION STANDARD | 1 | |
| 99A57004001307 | CALIBRATION STANDARD | 1 | |
| 99A57004001308 | CALIBRATION STANDARD | 1 | |
| 99A57004001320 | CALIBRATION STANDARD | 2 | |
| 99A57004003000 | CALIBRATION STANDARD | 1 | |
| 99A57004005000 | CALIBRATION STANDARD | 1 | |
| 99A57004006000 | CALIBRATION STANDARD | 1 | |
| 99A57004007000 | CALIBRATION STANDARD | 1 | |
| 99A57004009000 | CALIBRATION STANDARD | 1 | |
| 99A57004010000 | CALIBRATION STANDARD | 1 | |
| 99A57004011000 | CALIBRATION STANDARD | 1 | |
| 99A57004012000 | CALIBRATION STANDARD | 1 | |
| 99A5700410000 | CALIBRATION STANDARD | 1 | |
| 99A57004101000 | Calibration Block | 6 | |
| 99A57004101000-MOD | CALIBRATION BLOCK (NDT) | 1 | |
| 99A57004101000FL | CALIBRATIONSTANDARD | 1 | |
| 99A57103015000 | CALIBRATION STANDARD | 1 | |
| 99A57103028000 | CALIBRATION STANDARD | 3 | |
| 99A57103029000 | CALIBRATION STANDARD | 4 | |
| 99A57103030000 | CALIBRATION STANDARD | 4 | |
| 99A57103032000 | CALIBRATION STANDARD | 1 | |
| 99A57103033000 | CALIBRATION STANDARD | 2 | |
| 99A57103034000 | CALIBRATION STANDARD | 1 | |
| 99A57103034001 | AIRBUS A310 CALIBRATION STANDARD PART 4 57-10-28 PAGE 411/412 FIGURE 403 | 1 | |
| 99A57103035001 | CALIBRATION Standard | 2 | |
| 99A57103037000 | CALIBRATION STANDARD | 1 | |
| 99A57103038000 | CALIBRATION STANDARD | 2 | |
| 99A57103039000 | CALIBRATION STANDARD | 1 | |
| 99A57103041000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 57-10-45 PAGE 406 FIGURE 403. Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57103042000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 57-10-45 PAGE 421 FIGURE 408. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103043000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 54-10-45 PAGE 440 FIGURE 413. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103045000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 54-10-51 PAGE 404 FIGURE 403. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57103046000 | AIRBUS A300-600 CALIBRATION STANDARD PART 4 57-10-52 PAGE 415 FIGURE 403. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57104329000 | CALIBRATION STANDARD | 1 | |
| 99A57104330000 | CALIBRATION STANDARD | 1 | |
| 99A57104331000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 57-00-00-991-003-A SHEET 01, PAGE 10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A57104338000 | CALIBRATION STANDARD | 2 | |
| 99A57104361000 | CALIBRATION STANDARD | 1 | |
| 99A57104362000 | CALIBRATION STANDARD | 1 | |
| 99A57204319000 | CALIBRATION STANDARD | 1 | |
| 99A57204360000 | CALIBRATION STANDARD | 2 | |
| 99A57204367000 | CALIBRATION STANDARD | 1 | |
| 99A57204368000 | CALIBRATION STANDARD | 1 | |
| 99A57204375000 | CALIBRATION STANDARD | 2 | |
| 99A57204379000 | CALIBRATION STANDARD | 2 | |
| 99A57204385000 | CALIBRATION STANDARD | 1 | |
| 99A57204386000 | CALIBRATION STANDARD | 1 | |
| 99A57204387000 | CALIBRATION STANDARD | 3 | |
| 99A57204392000 | CALIBRATION STANDARD | 1 | |
| 99A57204395000 | CALIBRATION STANDARD | 1 | |
| 99A57204399000 | CALIBRATION STANDARD | 1 | |
| 99A57204403000 | CALIBRATION STANDARD | 3 | |
| 99A57204403001 | REFERENCE STANDARD - CALIBRATION BLOCK | 5 | |
| 99A57204404000 | CALIBRATION STANDARD | 1 | |
| 99A57204405000 | CALIBRATION STANDARD | 1 | |
| 99A57204406000 | CALIBRATION STANDARD | 2 | |
| 99A57204407000 | CALIBRATION STANDARD | 1 | |
| 99A57204408000 | CALIBRATION STANDARD | 2 | |
| 99A57204409000 | CALIBRATION STANDARD | 1 | |
| 99A57204410000 | CALIBRATION STANDARD | 2 | |
| 99A57204411000 | CALIBRATION STANDARD | 1 | |
| 99A57204413000 | CALIBRATION STANDARD | 1 | |
| 99A57204415000 | CALIBRATION STANDARD | 1 | |
| 99A57204418000 | CALIBRATION STANDARD | 1 | |
| 99A57204420000 | CALIBRATION STANDARD | 1 | |
| 99A57204422000 | CALIBRATION STANDARD | 1 | |
| 99A57204423000 | CALIBRATION STANDARD | 1 | |
| 99A57257327000 | CALIBRATION BLOCK | 1 | |
| 99A57404349000 | CALIBRATION STANDARD | 1 | |
| 99A57504294000 | AIRBUS A300-600 CALIBRATION STANDARD PT 6 57-52-05 PAGE 606 FIGURE 602 (SHEET 2). MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57504296000 | CALIBRATION BLOCK | 3 | |
| 99A57507293000 | STANDARD, CALIBRATION | 1 | |
| 99D5109001000 | CALIBRATION STANDARD SET AIRBUS | 1 | |
| 99D51103005000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103008000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103009000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103010000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103011000 | SPLIT CONICAL CALIBRATION BLOCK | 1 | |
| 99D51103012000 | CALIBRATION BLOCK | 1 | |
| 99D51103013000 | CALIBRATION BLOCK | 2 | |
| 99D51103014000 | CALIBRATION BLOCK | 1 | |
| 99D51103015000 | CALIBRATION BLOCK | 1 | |
| 99D51103016000 | BLOCK NDT CALIB STND | 1 | |
| 99D51107295000 | STANDARD, CALIBRATION | 5 | |
| 99D51303001000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51307001000 | CALIBRATION BLOCK | 1 | |
| 99D51407291000 | Calibration Block | 2 | |
| 99D51407291001 | STANDARD SET, CALIBRATION | 7 | |
| 99D52809001000 | STANDARD CALIBRATION | 1 | |
| 99D52809002000 | STANDARD CALIBRATION | 2 | |
| 99D52809004000 | CALIBRATION BLOCK | 7 | |
| 99D53103001000 | CALIBRA REFER BLOCK | 2 | |
| 99D53103002000 | STANDARD CALIBRATION | 1 | |
| 99D53203000002 | CALIBRATION BLOCK | 5 | |
| 99D53409001000 | Calibration Block | 5 | |
| 99D54403000000 | CALIBRATION STANDARD | 1 | |
| 99D54403000004 | CALIBRATION REFERENCE BLOCK | 7 | |
| 99D54403000005 | CALIBRATION BLOCK | 1 | |
| 99D54403000006 | Calibration equipment | 1 | |
| 99D54403001000 | CALIBRATION STANDARD | 1 | |
| 99D54403001002 | CALIBRATION STANDARD | 4 | |
| 99D54403002000 | CALIBRATION-STANDARD | 4 | |
| 99D54403003000 | CALIBRATION-STANDARD | 4 | |
| 99D54403004000 | CALIBRATION-STANDARD | 6 | |
| 99D54403006000 | CALIBRATION STANDARD | 1 | |
| 99D54403006001 | CALIBRATION STANDARD | 1 | |
| 99D54503004000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 54-52-17-991-003-A SHEET 01, PAGE7. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D5450300500 | INSPECTION KIT (CALIBRATION) | 1 | |
| 99D54503005000 | INSPECTION KIT (CALIBRATION) | 1 | |
| 99D545030050001 | INSPECTION KIT (CALIBRATION) | 1 | |
| 99D54503005001 | INSPECTION KIT (CALIBRATION) | 1 | |
| 99D54503006000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-08-991-007-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503007000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-09-991-003-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D55109001000 | CALIBRATION STANDARD SET | 7 | |
| 99D55367001000 | CALIBRATION BLOCK - FABRIC | 1 | |
| 99D55367002000 | CALIBRATION BLOCK - TAPE | 1 | |
| 99D57003001104 | CALIBRATION STANDARD | 1 | |
| 99D57003007000 | CALIBRATION BLOCK | 2 | |
| 99D57003009000 | CALIBRATION BLOCK | 2 | |
| 99D57003011000 | CALIBRATION BLOCK | 2 | |
| 99D57004000000 | CALIBRATION STANDARD | 4 | |
| 99D57004000040 | AIRBUS CALIBRAT | 1 | |
| 99D57004000042 | STANDARD CALIBRATION | 1 | |
| 99D57004001000 | CALIBRATION STANDARD | 4 | |
| 99D57103000000 | CALIBRATION-STANDARD | 1 | |
| 99D57103001000 | CALIBRATION-STANDARD | 1 | |
| 99D57103002000 | CALIBRATION-STANDARD | 3 | |
| 99D57103002001 | CALIBRATION-STANDARD | 5 | |
| 99D57103003000 | CALIBRATION-STANDARD | 1 | |
| 99D57103004000 | CALIBRATION-STANDARD | 4 | |
| 99D57103005001 | CALIBRATION BLOCK | 5 | |
| 99D57103006000 | CALIBRATION BLOCK | 5 | |
| 99D57103007000 | Calibration Block | 3 | |
| 99D57103008000 | STANDARD CALIBRATION | 6 | |
| 99D57103009000 | CALIBRATION BLOCK | 4 | |
| 99D57103010000 | CALIBRATION REFERENCE BLOCK | 5 | |
| 99D57103011000 | CALIBRATION BLOCK | 5 | |
| 99D57103012000 | STANDARD CALIBRATION | 6 | |
| 99D57103013000 | STANDARD CALIBRATION | 6 | |
| 99D57103014000 | UT CALIBRATION BLOCK | 5 | |
| 99D57103015000 | Calibration Block | 4 | |
| 99D57103016000 | Calibration Block | 7 | |
| 99D57103017000 | CALIBRATION BLOCK | 5 | |
| 99D57103018000 | CALIBRATION BLOCK | 4 | |
| 99D57103019000 | CALIBRATION BLOCK | 4 | |
| 99D57103020000 | Calibration Block | 3 | |
| 99D57103021000 | Calibration Block | 5 | |
| 99D57103025000 | NDT CALIBRATION BLOCK | 2 | |
| 99D57103026000 | NDT CALIBRATION BLOCK | 2 | |
| 99D57103032000 | CALIBRATION BLOCK | 2 | |
| 99D57103035000 | CALIBRATION BLOCK | 2 | |
| 99D57103036000 | CALIBRATION BLOCK | 2 | |
| 99D57204105000 | STANDARD CALIBRATION | 5 | |
| 99D57204107000 | CALIBRATION STANDARD | 6 | |
| 99D57204113000 | CALIBRATION STANDARD | 1 | |
| 99D57204114000 | CALIBRATION STANDARD | 1 | |
| 99D57204115000 | CALIBRATION STANDARD | 1 | |
| 99D57204125000 | CALIBRATION REFER BL | 5 | |
| 99D57204164000 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57204164001 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57204167000 | Calibration Block | 2 | |
| 99D57204188000 | AIRBUS A320 CALIBRATION STANDARD FIGURE 2 PROCEDURE D. A320 FWD SPAR LOWER FLANGE RIB 22-27. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57204189000 | CALIBRATION BLOCK | 1 | |
| 99D57204190000 | CALIBRATION BLOCK | 1 | |
| 99D57204193000 | AIRBUS CALIBRATION STANDARD, Material AL 7010/7050-T7651, EDM Notch 5mm (H) x 5mm (L) x 0.18mm (W) +/- 0.02mm, Paint all surfaces with primer (Material No. 16-006) . Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57294001000 | Airbus A318/A319/A320/A321 Calibration Block, Figure 57-29-08-991-023-A. Material: Cast Acrylic. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57404002000 | CALIBRATION BLOCK | 1 | |
| 99D57504103001 | CALIBRATION REFERENCE BLOCK | 3 | |
| 99D57504109000 | CALIBRATION REFERENC | 3 | |
| 99D91107295000 | CALIBRATION BLOCK | 1 | |
| 99F53103004000 | CALIBRATION STANDARD | 1 | |
| 99F53103005000 | CALIBRATION STANDARD | 1 | |
| 99F53107330000 | CALIBRATION TEST BLOCK SET | 2 | |
| 99F53113002000 | AIRBUS CALIBRATION STANDARD A330-200/300 53-11-55 PAGE 28 FIGURE 53-11-55-013-A. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53113005000 | AIRBUS CALIBRATION STANDARD A330-200/300 53-11-55 PAGE 15 FIGURE 53-11-55-007-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53207313000 | STANDARD, CALIBRATION | 3 | |
| 99F53207314000 | CALIBRATION BLOCK | 2 | |
| 99F53207316000 | Airbus Standard A330 53-21-36-PB6 PG 16 FIGURE 53-21-36-991-004-A SHEET 01..Calibration Block PN 99F53207316000 | 1 | |
| 99F53207317000 | Airbus Standard A330 53-21-36-PB6 PG 18 FIGURE 53-21-36-991-005-A SHEET 01..Calibration Block PN 99F53207317000 | 1 | |
| 99F53207318000 | Airbus Standard A330 53-21-36-PB6 PG 20 FIGURE 53-21-36-991-006-A SHEET 01..Calibration Block PN 99F53207318000 | 1 | |
| 99F53303000001 | AIRBUS CALIBRATION STANDARD A340-200/-300 FIGURE 53-31-39-991-003-A. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303008001 | CALIBRATION BLOCK | 2 | |
| 99F53303010000 | CALIBRATION BLOCK | 2 | |
| 99F53303026000 | CALIBRATION BLOCK | 1 | |
| 99F53303027000 | CALIBRATION BLOCK | 1 | |
| 99F53303030000 | CALIBRATION BLOCK | 1 | |
| 99F53303031000 | CALIBRATION BLOCK | 1 | |
| 99F53303057000 | CALIBRATION BLOCK | 1 | |
| 99F53303073000 | AIRBUS CALIBRATION STANDARD A340-500/-600 FIGURE 53-39-22-991-038-A SHEET 1. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303084000 | AIRBUS CALIBRATION STANDARD A340-500/-600 FIGURE 53-39-22-991-038-A SHEET 2. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303086000 | CALIBRATION BLOCK | 5 | |
| 99F53303094000 | CALIBRATION BLOCK | 2 | |
| 99F53303095000 | CALIBRATION BLOCK | 2 | |
| 99F53303099000 | CALIBRATION BLOCK | 3 | |
| 99F53303100000 | CALIBRATION BLOCK | 1 | |
| 99F53303101000 | CALIBRATION BLOCK | 2 | |
| 99F53303105000 | CALIBRATION BLOCK | 1 | |
| 99F53303115000 | NDT CALIBRATION BLOCK | 3 | |
| 99F53303120000 | AIRBUS A330-300/A340-200 CALIBRATION STANDARD 53-30-28 FIGURE 53-30-28-005-A. MATERIAL: 7075-T7351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303125000 | CALIBRATION BLOCK | 2 | |
| 99F53407333000 | CALIBRATION BLOCK | 1 | |
| 99F53507256000 | STANDARD, CALIBRATION | 2 | |
| 99F54503000000 | CALIBRATION BLOCK | 2 | |
| 99F54503011000 | CALIBRATION BLOCK | 2 | |
| 99F54503012000 | CALIBRATION BLOCK | 2 | |
| 99F55364009000 | NDT CALIBRATION BLOCK | 1 | |
| 99F57004100000 | CALIBRATION STANDARD | 1 | |
| 99F57004100001 | Calibration Block | 4 | |
| 99F57004101000 | CALIBRATION STANDARD | 1 | |
| 99F57004101001 | BLOCK-CALIBRATION | 4 | |
| 99F57004102000 | CALIBRATION STANDARD | 1 | |
| 99F57103017000 | Calibration Block | 3 | |
| 99F57103026000 | Calibration Standard | 1 | |
| 99F57103028000 | CALIBRATION BLOCK | 2 | |
| 99F57103054000 | CALIBRATION BLOCK | 2 | |
| 99F57103056000 | Calibration Block | 1 | |
| 99F57204102000 | Calibration Block | 7 | |
| 99F57204105000 | CALIBRATION BLOCK | 3 | |
| 99F57204106000 | CALIBRATION STANDARD | 4 | |
| 99F57204124000 | CALIBRATION BLOCK | 2 | |
| 99F57204130000 | CALIBRATION BLOCK | 4 | |
| 99F57204162000 | STANDARD-CALIBRATION | 1 | |
| 99F57204173000 | CALIBRATION BLOCK | 3 | |
| 99F57204174000 | CALIBRATION BLOCK | 2 | |
| 99F57204175000 | CALIBRATION BLOCK | 2 | |
| 99F57204176000 | CALIBRATION BLOCK | 2 | |
| 99F57404001000 | NDT CALIBRATION BLOCK | 1 | |
| 99F57500001000 | AIRBUS CALIBRATION STANDARD A340-200/-300, FIGURE 57-29-02-991-003-A. MATERIAL: 7050-T7651 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99L2620884900 | TEST BOX- CIRCUIT, FES (CALIBRATION) | 1 | |
| 99L51 107323000 | CALIBRATION BLOCK SET | 1 | |
| 99L51107323000 | CALIBRATION BLOCK SET | 1 | |
| 99L51304001000 | NDT CALIBRATION BLOCK | 1 | |
| 99L52107325000 | CALIBRATION BLOCK | 1 | |
| 99L53303021000 | AIRBUS A380-800 CALIBRATION BLOCK 53-31-33-991-006-A (SHEET 01& 02) PAGES 20-21. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53509001000 | CALIBRATION BLOCK | 1 | |
| 99L53509006000 | CALIBRATION BLOCK | 1 | |
| 99L55209001000 | CALIBRATION BLOCK | 1 | |
| 99L57200001000 | STANDARD-CALIBRATION | 1 | |
| 99L57204008000 | AIRBUS A310 CALIBRATION SENSITIVITY BLOCK PART4 57-29-01 PAGE 418 FIGURE 408. Includes Test Report and certificate of Conformance. | 1 | |
| 99L57204068000 | AIRBUS CALIBRATION BLOCK A380-800 57-21-17-991-024-A. MATERIAL: 2024 HDT T351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L71003001000 | CALIBRATION BLOCK | 1 | |
| 99N28207315000 | Calibration Block | 4 | |
| 99N51109009000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 11. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99N51109010000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 12. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99V51307001000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307002000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307003000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307004000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307008000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51907329000 | CALIBRATION BLOCK | 2 | |
| 99V51907331000 | CALIBRATION BLOCK | 1 | |
| 99V52307335000 | CALIBRATION BLOCK | 1 | |
| 99V52307336000 | CALIBRATION BLOCK | 1 | |
| 99V57103001000 | CALIBRATION BLOCK | 1 | |
| 99V57103002000 | Calibration Block-issue C | 1 | |
| 99V57200003000 | CALIBRATION BLOCK | 3 | |
| 9C2309G01 | CALIBRATION VSV | 1 | |
| 9RST1 | Calibration Standard, MD80 SID Section 2-1:FIG18 PG1 SHEET1 | 1 | |
| 640-050-003 | CALIBRATION STANDARD | 1 | |
| A0021A | SEMIANALYTIC BALANCE 360 GR. INTERNAL CALIBRATION | 1 | |
| A1-91 | HOIST HOIST-MINILIFT (CALIBRATION) | 2 | |
| A25012-2-CAL | Calibration - Test Bench. Test Box | 1 | |
| A27115-41-CAL | Calibration - Test Equipment - Outboard Aileron | 1 | |
| A28014-1-CAL | Calibration - Phase Checking Equipment | 1 | |
| A289A | ASSY Calibration Block Calibration Block | 1 | |
| A330-93905-0001 | CALIBRATION BLOCK | 1 | |
| A34012-19 | FIXTURE - CALIBRATION, ANGLE OF ATTACK TEST FIXTURE | 7 | |
| A38006-1 | TESTER,TOILETVACUU(CALIBRATION)(CALIBRATION) | 20 | |
| A38010-11 | TEST CABLE FOR CALIB. WATER TAN | 11 | |
| A386 | Calibration Block | 2 | |
| A389A | Calibration Block | 3 | |
| A389B | Calibration Block | 2 | |
| A389C | Calibration Block | 2 | |
| A50099 | TIE-DEX CALIBRATION DEVICE KIT | 1 | |
| A50189 | TIE-DEX CALIBRATION DEVICE | 1 | |
| A6 | CALIBIRATION BLOCK | 1 | |
| A71015-108 | LIFT FIXTURE (CALIBRATION) | 17 | |
| A8-AF | CALIBRACION CHECK | 4 | |
| A8-AF-CAL-BLOCK | CALIBRATION CHECK BLOCK | 1 | |
| AC 25-1009AW-02L-XC4-300# | DURALIFE TYPE 1009 GAUGE 1.0 2.5in Dial, SS Case & Tube, Bronze Socket (Dry), 1/4in NPT lower Conn., Individual Certified Calibration Chart, 0-300PSI Range" | 1 | |
| AC 25-1009AW-02L-XC4LL-1000# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in lower connection, calibration cert, Plus! option, 0-1000PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-30# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-30PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-300# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-300PSI range | 1 | |
| AC 25-1009AW-02L-XC4LL-60# | pressure gauge, 2.5in dial, SS case, bronze tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-60PSI range | 1 | |
| AC 25-1009SW-02L-X6BC4LL-4000#/BR | 2.5in dial, 304SS case, 316SS Bourdon tube & socket, 1/4in MNPT lower connection, cleaned for gaseous oxygen, calibration cert, Plus! performance option, 0-4,000PSI/Bar range" | 1 | |
| AC 25-1009SW-02L-XC4LL-100# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-100PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-10000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, Plus! option, 0-10,000PSI range | 1 | |
| AC 25-1009SW-02L-XC4LL-3000# | pressure gauge, 2.5in dial, SS case, 316SS tube, 1/4in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 30-1084S-02L-XC4-100# | test pressure gauge, 3in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, 0-100PSI range | 1 | |
| AC 30-1084S-02L-XC4-60# | test pressure gauge, 3in dial, SS case, 316SS tube, 1/4in lower connection, calibration cert, 0-60PSI range | 1 | |
| AC 35-1009SW-02B-XC4LL-5000# | pressure gauge, 3.5in dial, SS case, 316SS tube, 1/4in NPT lower back connection, calibration cert, Plus! option, 0-5,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-10000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-3000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-3,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-4000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC 45-1279SS-04L-XC4LL-5000# | pressure gauge, 4.5in dial, black phenolic case, 316SS tube, 1/2in NPT lower connection, calibration cert, Plus! option, 0-4,000PSI range | 1 | |
| AC-300 | ACOUSTIC CALIBRATOR | 1 | |
| AC10K-ADPTRKIT | AC10K-ADPTRKIT;Calibration Kit; VSWR/DTF | 1 | |
| AC2K | FUEL CALIBRATION SET | 3 | |
| ACCW2KG | AutoCrib Calibration Weight 2 kg | 1 | |
| ACR53-172942 | CALIBRATED CONDUCTIVITY REFERENCE STAND SET. 17%,29%, 42% IACS NOMINAL VALUES | 1 | |
| ACRS3-172942 | CALIBRATED CONDUCTIVVITY REFERENCE STANDARD SET OF 3. KIT CONSISTS OF MAGNESIUM, 6061-T6 AL AND 2024-T3 AL ( IACS Nominal values of 17%, 29% and 42% respectively) | 1 | |
| AD-1386 | CALIBRATION GUAGE | 2 | |
| AD-1386-CALIBRATION-GAUGE | AD-1386-CALIBRATION-GAUGE | 2 | |
| AD-953-7 | AIR DATA CALIBRATOR KIT- STATIC/PITOT ACCESSORY | 15 | |
| AD953-7 | AIR DATA CALIBRATOR KIT- STATIC/PITOT ACCESSORY | 15 | |
| ADA737-678 | AIR DATA CALIBRATOR | 14 | |
| ADA757-612 | AIR DATA CALIBRATOR | 8 | |
| ADA757â?612 | AIRÂ DATAÂ CALIBRATOR | 8 | |
| ADA767-612 | AIR DATA CALIBRATION TOOL | 4 | |
| ADC-2500 | Air Data Calibrator | 1 | |
| ADT 927 | CALIBRATION OIL HAND PUMP | 1 | |
| ADT672-02-GP10K-PSI-N | CALIBRATOR | 1 | |
| ADT875PC-155-A-220V | DRY WELL CALIBRATOR, -40C TO 155C | 1 | |
| AFK-EC-BH16 | Boeing Part 6 51-00-00 Proceedure 16 Eddy Current Bolt Hole Inspection Kit. Includes 15 Universal Rotating Split End scanner probes Supplied with a with a Universal 4 Pin Fischer Connector and 1 Calibration Standard with hole sizes ranging from .187"Ø to | 1 | |
| AFNDT-032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1006AL | CUSTOM 3 STEP CALIBRATION BLOCK 2024-T3 ALUMINUM, STEP SIZES 1.0" x 2.0" FACE. STEP THICKNESSES OF 0.100", 0.200" and 0.400" +/-.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1006CS | CUSTOM 3 STEP CALIBRATION BLOCK 4340 CARBON STEEL, STEP SIZES 1.0" x 2.0" FACE. STEP THICKNESSES OF 0.100", 0.200" and 0.400" +/-.002" PER DC-10 54-10-11 FIGURE 603 SHEET 43 PAGE 655. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015 | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE.0.190-0.194, countersink: 100 degrees, 0.3748-0.3819 diameter....0.203-0.207, countersink: 100 degrees, 0.3748-0.3819 diameter....0.2172-0.2182, co... | 1 | |
| AFNDT-1015-CALCS | CALIBRATION BLOCK 4140S. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-CALSS | CALIBRATION BLOCK 304SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-CS/MM | CUSTOM 4 STEP CALIBRATION BLOCKS CARBON STEEL , 54MM, 10MM, 15MM, 20MM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-INC625 | CALIBRATION STANDARD INCOLNEL BLOCK 625 5X1 OAL .10,.20,.30,.40,.50. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-SS/MM | CUSTOM 4 STEP CALIBRATION BLOCKS STAINLESS STEEL , 54MM, 10MM, 15MM, 20MM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015/2024 | CUSTOM 4 STEP CALIBRATION BLOCK 2024-T3 ALUMINUM, STEP SIZES .75"x.75" FACE WITH STEP THICKNESSES OF .040",.060",.080",.100" +/-.001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1040 | THREE HOLE CALIBRATION STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1060 | NON-PIPING CALIBRATION BLOCK, 3/4 X 6 1/4 X 12. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1062 | NON-PIPING CALIBRATION BLOCK FIGURE T-434.2.1 ASME SECTION V Article IV, 3" X 6 1/4" X 12". MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1076AL | ALUMINUM CALIBRATION BLOCK 0.020"-0.100" | 1 | |
| AFNDT-1076TI | TITANUM CALIBRATION BLOCK 0.020"-0.100 | 1 | |
| AFNDT-2002AL | CALIBRATION STANDARD THREE HOLES, 1.0,1.25,1.5, CORNER NOTCH .030X.030. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2038AL | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE. HOLE SIZES: .156"Ø and .187"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2056 | CUSTOM CALIBRATION BLOCK, THREE SURFACE NOTCHES .008" , .020" , .040" SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2058/7075T6 | 6 STEP CALIBRATION BLOCK, CUSTOM, .030", .040", 0.60" , 0.80", .100", .150", 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2064 | CUSTOM CALIBRATION PER SPEC. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2079/2024T3 | 6 STEP CALIBRATION BLOCK, STEP SIZES .030", .100", .250", .500", .750", 1.0" in 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2085/7075-T6 | 6 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(500",.600",.700",.800",.900" and 1.0") +/- .001" 7075-T6 ALUMINUM . Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797... Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2086CS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .050", .075", .100", .125" ±.001, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2086SS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .050", .075", .100", .125" ±.001, 3/4" X 3/4" PAD SIZE. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2087/CS | 5 STEP CALIBRATION BLOCK, .100, .200, .300, .400, .500, ± .001, 3/4X3/4 FACE, CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2087/SS | 5 STEP CALIBRATION BLOCK, .100, .200, .300, .400, .500, ± .001, 3/4X3/4 FACE, STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/2024-T3 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/304SS | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/6AL-4V | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088CS | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 4340 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/AL | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/MAG | 5 STEP CALIBRATION BLOCK, STEP THICKNESSES: .050, .100, .150 , .200, .250. STEP PAD SIZE: 1.0" x 1.0", MATERIAL: MAGNASESIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/S | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 4340 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/SS | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 300 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/TI | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2093/7075-T6 | 5 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(1.100", 1.200", 1.300", 1.400", 1.500" ) +/- .001" 7075-T6 ALUMINUM. Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797 | 1 | |
| AFNDT-2098/7175 | ALUMINUM CALIBRATION BLOCK 2.5MM-12.5MM | 1 | |
| AFNDT-2103AL | METRIC 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. PAD SIZE: 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2103CS | METRIC 5 STEP CALIBRATION BLOCK, 1018 CARBON STEEL. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2103SS | METRIC 5 STEP CALIBRATION BLOCK, 304 STAINLESS STEEL. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2111 | CUSTOM CALIBRATION TEST STANDARD. PER CUSTOMER SPECS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2129CS | LEONDRO CALIBRATION BLOCK PAGE 18 FIGURE 3 S.B. N°169-165. 2 STEP BLOCK, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 2-3mm and 10-11mm. ±.0.1mm, PAD SIZE: 20mm X 20mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2145AL | Custom calibration standard containing 4 hole sizes of 5mm, 6mm, 8mm and 10mm. Each hole has a .100" x .100" x .005" W +/- .002". Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2145MG | Custom calibration standard containing 4 hole sizes of 5mm, 6mm, 8mm and 10mm. Each hole has a .100" x .100" x .005" W +/- .002". Material: Mgnesium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2160/19MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 270mm x 150mm x 19mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2160/38MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 330mm x 150mm x 38mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2227TI-1 | 8 HOLE CALIBRATION STANDARD, HOLE SIZES; 1/8 5/3 | 1 | |
| AFNDT-2227Ti-1 | 8 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", EDM NOTCH: .050" x .050" x .005" +0.000/-.002" BOEING REFERENCE STANDARD PT. 6 757 51-00-14 FIG.3, 737 PT 6 51-00-00 FIG 3 PROCEDURE 17, PG.8 MATERIAL(6AL-4V) TIT | 1 | |
| AFNDT-3006AL | Step Wedge: Material: 2024-T3 Aluminium, 5 Steps total (12mm, 14mm, 16mm, 18mm and 20mm). Tolerance = +/-0.05mm. Step pad size: 1.0” x 1.0". Includes Mill Test Report, Calibration Report and Certificate of Conformance. | 1 | |
| AFNDT-3010/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3039 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-304AWSDS | DISTANCE / SENSITIVITY (DS) CALIBRATION BLOCK 304 STAINLESS STEEL AWS type DS | 1 | |
| AFNDT-3059 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .516"Ø and .812"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3060 | Custom Eddy Current 2 Hole Calibration Standard per Customer Supplied Drawing. Material: 7050-T7451. Hole Sizes: .252"Ø and .516"Ø with a total of 4 EDM Notches 0.021" x 0.021" x .004" Wide Max. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3062/13-8PH | 8 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3062/15-5PH | 5 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3062/17-4PH | 5 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/13-8PH | 5 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/17-4PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3067/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" Material: 15-5PH STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3067/6AL4V | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3072 | Custom designed eddy current aircraft calibration standard, Drawing 3, Sheets 1-3, for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3106TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.035", 0.070", 0.105", 0.140", 0.175", .210" 0.250" +/- .001". STEP PAD SIZE: .75" x .75". Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3124/316L | Custom Ultrasonic Calibration Block. Material: 316L Stainless Steel. Size: 6.0" x 1.5" x 5mm Thick. EDM slot depths 0.118"(0.3mm), .0197"(0.5mm), .0394"(1.0mm), .0787"(2.0mm), .0984"(2.5mm) x .005"W +/-.001"Wide. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3124/6061 | Custom Ultrasonic Calibration Block. Material: 6061 Al. Size: 6.0" x 1.5" x 5mm Thick. EDM slot depths 0.118"(0.3mm), .0197"(0.5mm), .0394"(1.0mm), .0787"(2.0mm), .0984"(2.5mm) x .005"W +/-.001"Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3136-7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 7075-T6 Aluminum | 1 | |
| AFNDT-3136/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 2024-T3 Aluminum | 1 | |
| AFNDT-3137AL | 14 Hole Calibration Standard, Hole Sizes; 1/8" 5/32", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole Per Boeing B737 PT 6 51-00-00 Prodedure 1 | 1 | |
| AFNDT-3175AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report a... | 1 | |
| AFNDT-3175CS | 8 Step Calibration Block, Material 1018 Steel. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report and Cer... | 1 | |
| AFNDT-3175TI | 8 Step Calibration Block, Material 6AL-4V Titanium. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report an... | 1 | |
| AFNDT-3181AL | 8 Step Calibration Block, Material 2024-T3 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 5.0mm, 7.5mm, 10mm. (Tolerance: +/-0.02mm).- Pad Size: 20mm x 20mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3187AL | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Per Airbus Procedure A 51-10-04. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3187TI | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Per Airbus Procedure A 51-10-04. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3200/321 | 7 STEP CALIBRATION BLOCK. STEP SIZES: .020", .040", .060", .080", .100", .150", and .200" +/- .010". PAD SIZE: 1.0" x 1.0", MATERIAL: 321 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3201A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 11.3mm(.445")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3201CS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .250", .500", .750", 1.00" ±.002, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3202A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 14.3mm(.563")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3203A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.1mm(.594")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3204A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.9mm(.626")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3205A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.0mm(.630")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3206A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.3mm(.642")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3207A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.7mm(.657")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3208A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 17.5mm(.689")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3209A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 19.3mm(.760")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3230A | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 5/16" (.312")Ø Contains one EDM Corner Notch .050" x .050" +/- .001", and one EDM Surface Notch .750" long x .020 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Test Rep... | 1 | |
| AFNDT-3236CS | Custom Thin 4-Step Calibration Block, 1018 Carbon Steel (0.040, 0.060, 0.080 and 0.100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3236SS | Custom Thin 4-Step Calibration Block, 304 Stainless Steel (0.040, 0.060, 0.080 and 0.100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3237AL | Custom Thin 8-Step Calibration Block, 7075 Aluminum (.030, .040, .050, .060, .070, .080, .090 .100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3250/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" inch diameters. ( .030 x .030 Corner and .020 x .020 Midwall EDM Notches in each Hole. Material: 2024-T3 Aluminum | 1 | |
| AFNDT-3254AL | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameters = 2 Holes 22.23mm(.875")Ø, and 25.4mm(1.0")Ø. EDM Flaws:.030" x .030" x .005" +/- .001" Corner EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Con | 1 | |
| AFNDT-3277 | Custom 2 Layer 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. 36 Total EDM Notches.1.) EDM Notch Specifications: .030 x .030 Corner EDM Notches in each Hole. 2.) Faying Surfa | 1 | |
| AFNDT-3296/316L | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .020 x .005" ± .002" Thru EDM Notches in each Hole. Material: 316L Stainless Steel. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3308AL | Eddy Current Calibration Standard 3/8” diameter hole standard. Material: 2024-T3 standard with a .030”x .030" corner notch. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3316AL | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 3/8" (.375")Ø Contains one EDM Corner Notch .030" x .030" +/- .001", and one EDM Radius Thumbnail Notch .120" long x .030 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Tes | 1 | |
| AFNDT-3334AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3334AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3335/1018 | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 1018 Carbon Steel . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-3335/2024-T3 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 2024-T351. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and C | 1 | |
| AFNDT-3335/4340 | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 4340 Carbon Steel . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-3335/7075-T6 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 7075-T6. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3335/TI6AL-4V | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 6AL-4V Titanium . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cert | 1 | |
| AFNDT-3339MAG | 4 Step Calibration Block, .25", .500", .750", 1.00". Pad Size: .750" x .750". MATERIAL: AZ21 Magnesium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3340CS | CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 4340 CARBON STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3340SS | CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3386/7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .040 x .005 ±.002" Through EDM Notches in each Hole. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3389/15-5 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/4340 | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3389/6AL4V | 12 Hole Calibration Standard, Hole Sizes; 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .020 x .020 x .005" ± .002" Corner and .020" x .005" ± .002" Thru EDM Notches in each Hole, .010, .020, .040" x .750" Long Surfac | 1 | |
| AFNDT-3406-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035" .040". MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3410AL | CUSTOM 5 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF 0.020", 0.040",0.060", .080", .100 +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3414-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .050", .100", .200", .300", .400", .500". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3415 | CUSTOM 6 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3428 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. 3 EDM NOTCH SIZES: 2.0mm(.078") LONG x 0.1mm(.0039") WIDE x 0.25mm(.010") DEEP. 6.35mm(.25") LONG x 0.1mm(.0039") WIDE x 0.5mm(.019") DEEP. 1.5mm(.059") LONG x 0.1mm(.0039") WIDE x 0.76mm(. | 1 | |
| AFNDT-3429 | 6 STEP CALIBRATION BLOCK, .5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm. ± .001, 3/4X3/4 FACE, 1018 CARBON STEEL Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3437AL | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3437SS | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3452AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm, 20mm. (Tolerance: +/-0.02mm).- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3453 | Custom Calibration Block, 7050-T7 Aluminum. Hole Diameter .310 Ø Contains one EDM Corner Notch .020" x .020" +/- .002", and one EDM Surface Notch .030 deep x .015" wide +/- .002 . Block Size = 3.75" x 1.0" x .25". Includes Test Report and Certificate | 1 | |
| AFNDT-3459AL | Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1. | 1 | |
| AFNDT-3459TI | Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in | 1 | |
| AFNDT-3460AL | Custom Eddy Current Bolt Hole Calibration Standard. Total of 35 Hole Sizes: Diameters 3.0mm, 3.2mm, 4.0mm, 4.2mm, 4.6mm, 5.0mm, 5.4mm, 5.8mm, 6.2mm, 6.6mm, 7.0mm, 7.4mm, 7.8mm, 8.0mm, 8.2mm, 8.6mm, 9.0mm, 9.4mm, 9.8mm, 10.2mm, 10.6mm, 11.0mm, 11.4mm, 11. | 1 | |
| AFNDT-3471AL | Custom Eddy Current Bolt Hole Calibration Standard Manufactured in Accordance with Airbus Specification 51-63-04. Total of 14 Hole Sizes x 4 For a Total of 56 Holes: Diameters 13.5mm(.531"), 14.1mm(.555"), 14.3mm(.563"), 15.0mm(.591"), 15.8mm(.622"), ... | 1 | |
| AFNDT-3472AL | Custom Eddy Current Bolt Hole Calibration Standard Manufactured in Accordance with Boeing Specification 51-00-00. Total of 14 with 28 EDM Notches. Hole Sizes: Diameters 13.5mm(.531"), 14.1mm(.555"), 14.3mm(.563"), 15.0mm(.591"), 15.9mm(.625"), 16.7mm(... | 1 | |
| AFNDT-3477AL | METRIC 10 STEP ALUMINUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 2024-T3 Aluminum Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3477CS | METRIC 10 STEP CARBON STEEL CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 1018 or 4340 Carbon Steel Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conform... | 1 | |
| AFNDT-3477TI | METRIC 10 STEP TITANIUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 6AL-4V Titanium Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3479TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.024", 0.040", 0.060", 0.800", 0.100", .150" 0.200" +/- .001". STEP PAD SIZE: .75" x .75". Note: The first and last pad is 1.0" long. Supplied With Delrin Holding Block Includes certi | 1 | |
| AFNDT-3482AL | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .098", .197", .295", .394", .492" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3482AL-1 | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .020", .039", .059", .079", .098" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483AL | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: 7075-T6 Aluminum. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483CS | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3484AL | Eddy Current Bolt Hole Calibration standard, 5 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: .750", .875",1.00" 1.125" 1.187", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3485AL | Eddy Current Bolt Hole Calibration standard, 3 Hole Sizes. Material: 7075-T6 Aluminium, Hole diameters: 1.250" 1.375", 1.500", .030" x .030" x .005" ± .001" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3502AL | 4 HOLE ALUMINUM CALIBRATION STANDARD. ....2 HOLE SIZES AT 2.38mm DIAMETER WITH A CONER EDM NOTCH .030" x .030" X .005" WIDE ± .001" IN ONE HOLE. NO EDM NOTCH IN THE SECOND HOLE.....2 COUNTERSINK HOLES AT .0937mm DIAMETER WITH AN EDM NOTCH IN ONE OF T... | 1 | |
| AFNDT-3505/6061-T4 | METRIC 10 STEP CALIBRATION BLOCK, 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6061-T4 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3508/6061 | METRIC 5 STEP CALIBRATION BLOCK, 6061-T4 ALUMINUM. STEP SIZES: .5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm. PAD SIZE: 1.0" x 1.0". PROVIDED WITH A DELRIN HOLDER.Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3516/15-5PH | 6 STEP CALIBRATION BLOCK, MATERIAL: 15-5PH STEEL. PAD SIZE: .75" x .75". STEP SIZES: .030", .100", .200", .300", .400", .500" ± .001". Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3523AL | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 7075-T6 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523CS | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 4340 Carbon Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523MAG | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: Magnesium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523SS | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 304 Stainless Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523TI | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 6AL-4v Titanium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3527/2024T3 | 12 Hole Calibration Standard, 27 Total EDM Notches. Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 ± .002" Corner EDM Notches in each Hole. 3 surface EDM Notches .008”,.020” | 1 | |
| AFNDT-3529AL | 4 Step Calibration Block, .750", 1.000", 1.250", 1.500". Tolerance= ± .002" MATERIAL: 2024-T3 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3552TI | 5 Step calibration block (0.100", 0.250", 0.500", 0.750" and 1.000"; . Step pad size: .75” x .75”. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance.....Reference: B777 NTM Part4 51-00-10 | 1 | |
| AFNDT-3561AL | CUSTOM 3 STEP CALIBRATION BLOCK, 2024-T3 ALUMINUM... STEP PAD SIZE: 25.0mm x 25.0mm. STEP THICKNESSES: 0.3mm, 0.5mm and 0.8mm ± 0.03mm. Supplied with Protective Acetal Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3562/321SS | CUSTOM 3 STEP CALIBRATION BLOCK 321 Stainless, STEP SIZES .75" x .75" FACE. STEP THICKNESSES OF 0.025", 0.040" and 0.060" +/-.001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-CHOKE BLOCK-70/30 | CALIBRATION BLOCK 70/30 COPPER-NICKEL | 1 | |
| AFNDT-CHOKE BLOCK-C | CALIBRATION BLOCK 1018 CARBON STEEL | 1 | |
| AFNDT-CHOKE BLOCK-DUP | CALIBRATION BLOCK 2205 SS (DUPLEX) | 1 | |
| AFNDT-CHOKE BLOCK-S | CALIBRATION BLOCK 303 STAINLESS STEEL | 1 | |
| AFNDT-IIW-01-CASE | Form Fitted Wood Case for IIW Type 1 Calibration Block | 1 | |
| AFNDT-PR-T-2521/22 | CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AGE-04895-403 | HARNESS-ADC CALIBRATION | 1 | |
| AGE-05102-403 | SET - ADAPTERS/HARNESS, ADC CALIBRATION | 3 | |
| AGE-05697-401 | NDT CALIBRATION STANDARD | 3 | |
| AGE04900-401 | EMBRAER 145 NDT CALIBRATION STANDARD PART | 4 | |
| AGE17077A | GROUND TEST TOOL, AGSE (CALIBRATION) | 1 | |
| AGE70551 | LRT CALIBRATION UNIT KIT | 1 | |
| AGSE-E094-G03 | ENGINE CRADLE, CF34-10E (CALIBRATION) | 9 | |
| AGSE-E169-G02 | ENGINE BASE, CF34-10E (CALIBRATION) | 8 | |
| AHS29 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| AIP12-01040 | ENGINE CALIBRATION SET-UP KIT | 1 | |
| AIT320020-001 | BOGIE COMPRESSION TOOL (CALIBRATION) | 2 | |
| AKE190 | PITOT TUBE CALIBRATOR EQUIPMENT | 3 | |
| AL29-32 | NDT, STANDARDS, CALIBRATION | 6 | |
| AL29A029 | STD CALIBRATION TOOL | 1 | |
| AL35-45 | NDT, STANDARDS, CALIBRATION | 8 | |
| ALT-8000-SILVER-3 | ALT-8000-SILVER-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| ALT-8000-SILVER-5 | ALT-8000-SILVER-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| ALT-8015-CCIOD | ALT-8015-CCIOD;Certified Calibration with Incoming and Outgoing DATA - ALT-8015 | 1 | |
| ALT-9000-3 | ALT-9000-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| ALT-9000-5 | ALT-9000-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| ALT-9000-CCIOD | ALT-9000-CCIOD;ALT-9000-CCIOD;Certified Calibration with incoming/outgoing DATA-ALT-9000 | 1 | |
| ALT-9000-FRRIOD | ALT-9000-FRRIOD;ALT-9000-FRRIOD;FRR Certified Calibration incoming/outgoing DATA-ALT-9000 | 1 | |
| ALT8000-CCIOD | ALT8000-CCIOD;Certified Calibration with Incoming and Outgoing DATA - ALT 8000 | 1 | |
| AN670-55-31-102 | CALIBRATION REFERENCE STANDARD (CRS), MADE OF ALUMINUM WITH MULTIPLE LAYERS CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| AN670-55-31-110 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| ANDT 1015 | Calibration Block | 3 | |
| ANDT 1049 | Calibration Block | 3 | |
| ANDT 1057 | Calibration Block | 3 | |
| ANDT 1077 | Calibration Block | 4 | |
| ANDT 3006 | Calibration Block | 3 | |
| ANDT-1070/4330 | 14 HOLE CALIBRATION STANDARD. Material: 4330 Steel. Hole Sizes: 5/32, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 3/8, 1/2. EDM Flaws: .020" x .020" x .005" +/- .001" and .030" x .030" x .005" Wide +/- .001" corner notches. ... | 1 | |
| ANDT-1070/TI | 14 HOLE CALIBRATION STANDARD. Material: 6AL-4V Titanium. Hole Sizes: 5/32, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 3/8, 1/2. 28 Total EDM Flaws: .020" x .020" x .005" +/- .001" and .030" x .030" x .005" Wide +/- .001" co... | 1 | |
| ANDT1015 | CALIBRATION BLOCK | 3 | |
| ANDT1053 | CALIBRATION BLOCK | 5 | |
| ANDT1057 | CALIBRATION BLOCK | 3 | |
| ANDT1081 | CALIBRATION BLOCK (0.056"-0.067") | 2 | |
| ANDT3004 | Calibration Block | 3 | |
| ANDT3016-B | Calibration Block | 4 | |
| ANDT3019 | Calibration Block | 3 | |
| ANDT4126 | Calibration Block | 2 | |
| ANV-126-085 | NIGHT VISION CALIBRATION | 1 | |
| APCAC100-3-13 | SHAFT BORING CALIBRATION | 1 | |
| APM-424-CCIOD | APM-424-CCIOD;Certified Calibration with Incoming and Outgoing DATA - APM-424 | 1 | |
| APM-424V5-3 | APM-424V5-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| APM-424V5-5 | APM-424V5-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| APTRQ 500311 | SMART TRANSDUCER CALIBRATION SYSTEM | 1 | |
| ARP | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ASE-WSNDT | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| ASI-418 | EFD/MFD GAIN POSITION CALIBRATOR TEST SET | 1 | |
| ASTM B193 | CALIBRATION BLOCK | 1 | |
| ASTW-8 | CUSTOM ACRYLIC CALIBRATION STANDARDS, SET OF 8, THICKNESS .921 / .818 / .559 / .504 / .275 / .248 / .157 / .134 | 1 | |
| AT575-343W | CALIBRATION BLOCK | 1 | |
| ATB-7300NG-3 | ATB-7300NG-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| ATB-7300NG-5 | ATB-7300NG-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| ATB7300-CCIOD | ATB7300-CCIOD;Certified Calibration with Incoming and Outgoing DATA - ATB 7300 | 1 | |
| ATB7300S-CCIOD | ATB7300S-CCIOD;Certified Calibration with Incoming and Outgoing DATA - ATB 7300S | 1 | |
| ATC-1400-CCIOD | ATC-1400-CCIOD;Certified Calibration with Incoming and Outgoing DATA - ATC-1400 | 1 | |
| ATC-1400RPG-CCIOD | ATC-1400RPG-CCIOD;Certified Calibration with Incoming and Outgoing DATA - ATC-1400 RPG | 1 | |
| ATC-201-CCIOD | ATC-201-CCIOD;Certified Calibration with Incoming and Outgoing DATA - ATC-201 | 1 | |
| ATC-5000NG-3 | ATC-5000NG-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| ATC-5000NG-5 | ATC-5000NG-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| ATC-5000NG-CCIOD | ATC-5000NG-CCIOD;Certified Calibration with Incoming and Outgoing DATA - ATC-5000NG | 1 | |
| ATC-600-CCIOD | ATC-600-CCIOD;Certified Calibration with Incoming and Outgoing DATA - ATC-600 | 1 | |
| ATC-601-CCIOD | ATC-601-CCIOD;Certified Calibration with Incoming and Outgoing DATA - ATC-601 | 1 | |
| ATI300 | CALIBRADOR DE PNEU ATI300 | 1 | |
| ATI520CGC | CALIBRATION KIT | 4 | |
| ATR42-421G | Calibration - Pitot Static | 1 | |
| ATR42421G | CALIBRATOR PITOT | 1 | |
| ATR42V000A-CAL | Calibration - Digital Air / Hyd Tool Kit | 1 | |
| AUR-.281SE/2.0WL | CALIBRATION STANDARD | 1 | |
| AUR-.375SE/2.0WL | CALIBRATION STANDARD | 1 | |
| AUR-.437SE/2.0WL | CALIBRATION STANDARD | 1 | |
| AV1300ATI | TIRE PRESSURE CALIBRATOR | 1 | |
| AVX-10K-CCIOD | AVX-10K-CCIOD;AVX-10K Unit-CCIOD;Certified Calibration incoming and outgoing DATA-AVX-10K | 1 | |
| AVX-10K-FRRIOD | AVX-10K-FRRIOD;AVX-10K Unit-FRRIOD;Certified Calibration incoming/outgoing DATA-AVX-10K | 1 | |
| AVX-10K-MAXCARE-3 | AVX-10K-MAXCARE-3;3 Yr Total HW Warranty+Certified Calibrations+Loaner+Accessories-MAXCARE-3 | 1 | |
| AVX-10K-MAXCARE-5 | AVX-10K-MAXCARE-5;5 Yr Total HW Warranty+Certified Calibrations+Loaner+Accessories-MAXCARE-5 | 1 | |
| AVX-10K-SILVER-3 | AVX-10K-SILVER-3;3 Yr Total HW Warranty + Certified Calibration Pre and Post Data - SILVER-3 | 1 | |
| AVX-10K-SILVER-5 | AVX-10K-SILVER-5;5 Yr Total HW Warranty + Certified Calibration Pre and Post Data - SILVER-5 | 1 | |
| AW-05384 | ATR STEPWEDGE CALIBRATION BLOCK | 1 | |
| AXD620 | MANOMETER - PORTABLE (MANOMETRO CALIBRADO EN PULGADAS DE AGUA) | 1 | |
| B-4-HN | Nipple (Calibrated Gauge Component) | 1 | |
| B-4-T | Tee (Calibrated Gauge Component) | 1 | |
| B27039-13 | TRIM AND CALIBRATE EQUIPMENT FOR ELEVATOR AND STABILIZER | 4 | |
| B30001-7 | GSE TEST EQUIPMENT WITHOUT CALIBRATION CERTIFICATE | 14 | |
| B80-105 | ENGINE INLET PLUGS, Excalibur Model (set of 6) | 1 | |
| BACB30US10K47 | STANDARD (CALIBRATION BOLT) | 1 | |
| BAT-HLTG | CALIBER DE SALIDA DE PASADORES DE "GO-NOGO" PARA HI-LOKS | 1 | |
| BAe3100/53-10-15/14-18SWG | Calibration Standard, BAe 3100 PT6 53-10-15:PG408 FIG2, 14SWG TOP/18SWG BOTTOM | 1 | |
| BAe3100/53-10-15/17-18SWG | Calibration Standard, BAe 3100 PT6 53-10-15:PG408 FIG2, 17SWG TOP/18SWG BOTTOM | 1 | |
| BAe3100/53-10-15/19-18SWG | Calibration Standard, BAe 3100 PT6 53-10-15:PG408 FIG2, 19SWG TOP/18SWG BOTTOM | 1 | |
| BEAMEX MC6 | CALIBRATOR MULTIFUNCTION | 1 | |
| BH153H-20 | CALIBRATOR GAUGE | 1 | |
| BH7475 – T7351 | EDDY CURRENT ROTO CALIBRATION TEST BLOCK | 4 | |
| BH7475-T7351 | NDT, CALIBRATION STDS | 4 | |
| BH7475T7351 | CALIBRATION PIECE | 4 | |
| BH7545-T7351 | STANDARD CALIBRATION | 1 | |
| BL49893 | CALIBRATION TOOL | 1 | |
| BLR-0323 | CALIBRATION KIT | 1 | |
| BP2712 | BATTERY FLUKE PRESSURE CALIBRATION | 1 | |
| BPSRQ00 | BELT TENSION TESTER CALIBRATION MODEL: BTT-HZ | 1 | |
| BS2185 | CHAMBER: TEST,TEMP SENSOR, 115 VAC, REQUIRES CALIBRATION | 1 | |
| BSENIS06789-2-2017 | MANUAL HAND TORQUE TOOL CALIBRATION | 1 | |
| BTR-14038 | CAB CALIBRATION CONSOLE | 1 | |
| BUTTON HEAD CAL STD | BOEING BUTTON HEAD CALIBRATION STANDARD | 1 | |
| BYLFLU714 | THERMOCOUPLE CALIBRATOR | 1 | |
| BYLFLU718100 | PRESSURE CALIBRATOR 718 - 100G | 1 | |
| C-130-OW-016 | CALIBRATION STANDARD BLOCK | 2 | |
| C-342 | TDS CALIBRATION SOLUTION | 1 | |
| C02683A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 3.250'' TALL X 1.250" WIDE X 15.50" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| C02699A | PAUT ULTRASONIC CALIBRATION STANDARD, HY-100, NICKELPLATED 6.250'' TALL X 1.250" WIDE X 24.00" LONG UT SCANNING SURFACE PHONOGRAPHIC FINISH TO 125 RA | 1 | |
| C1004-CC | C1004-CC;Service Certified Calibration for C1004 Chassis | 1 | |
| C101 | CALIBRADOR VERNIER | 1 | |
| C12-DEL-3C1N | CALIBRATION BLOCK | 3 | |
| C12-DIS-3C1N | CALIBRATION BLOCK | 3 | |
| C12-PCS-3C1N | CALIBRATION BLOCK | 3 | |
| C12-POT-3C1N | CALIBRATION BLOCK | 3 | |
| C12DIS3C1N | CALIBRATION BLOCK | 3 | |
| C12P0D3C1N | CALIBRATION BLOCK | 1 | |
| C12PCS3C1N | CALIBRATION BLOCK | 3 | |
| C130-0W-016 | CALIBRATION STANDARD | 2 | |
| C130-CW-012 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 + NUT P/N: KFN542-3) 6 PLACES. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-CW-013 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 + NUT P/N: KFN542-3) 6 PLACES. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-CW-017 | C-130 CALIBRATION STANDARD | 1 | |
| C130-CWOW-019 | LOCKHEED C-130 CALIBRATION STANDARD LOWER SURFACE PANEL. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| C130-OW-016 | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 No.1 and No. 4 Truss Mount Upper Lugs. Material: 7075-T6 Aluminum Sulfuric Acid Anodized Per MIL-A-8625 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-OW-017 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| C130-OW-020 | CALIBRATION STANDARD | 1 | |
| C130-UT-17-1 | C-130 CALIBRATION STEP STANDARD. MATERIAL:7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| C15292 | CALIBRATION BOX K777 WAS ON THE SSOW LIST | 9 | |
| C15293 | CALIBRATION BOX | 1 | |
| C21001-19 | PORTABLE CALIBRATOR | 11 | |
| C22005-22 Cal Fee | CALIBRATION SERVICE | 1 | |
| C24003â?1 | AIRÂ DATAÂ CALIBRATOR | 17 | |
| C26006-70 Cal Fee | CALIBRATION SERVICE | 1 | |
| C27030-94 | TESTTOOL(CALIBRATION)(CALIBRATION) | 17 | |
| C29002-17 | TESTBOX-RUDDERPOWERCONTROLUNIT(CALIBRATION) | 19 | |
| C29002-17 Cal Fee | CALIBRATION FEE | 1 | |
| C30001-CALIB | CALIBRATION / CERTIF | 1 | |
| C32004-58-CAL | Calibration - Text Proximity Switch | 1 | |
| C34002-5 | CALIBRATION EQIPT | 1 | |
| C34012-21 | Test Box Calibration | 2 | |
| C36006 | TEST EQUIPMENT - AIR SUPPLY CONTROL SYSTEM (CALIBRATION) | 1 | |
| C49004-42 | APU SLING ASSY. (CALIBRATION) | 6 | |
| C49007-42 | HOIST EQPT - AUXILIARY POWER UNIT (CALIBRATION) | 20 | |
| C5CALREPORT | C5CALREPORT;TB/MTS5800 Calibration Report | 1 | |
| C77004-10 | Test Box - Calibration | 20 | |
| CA5000-D001 | CA5000-D001;CA5000 CellAdvisor 5G Calibration Report | 1 | |
| CA5000-D002 | CA5000-D002;CA5000 CellAdvisor 5G Calibration Report per ISO 17025 | 1 | |
| CA71 | MULTIFUNCTION CALIBR | 3 | |
| CAA06M-CR | CAA06M-CR;CAA Module Calibration Report | 1 | |
| CAA06M-CRISO | CAA06M-CRISO;CAA Module Calibration Report per ISO 17025 | 1 | |
| CAA06M-TC | CAA06M-TC;ISO TOP Calibration CAA06M module for ONA-800 | 1 | |
| CABM01314100001 | BOOM ELEVATOR CALIBRATION RIG | 1 | |
| CAL-KIT-001B | MSU CALIBRATION KIT | 1 | |
| CAL-SERV-AGRMT | CAL-SERV-AGRMT;Custom Calibration Service Agreement | 1 | |
| CAL100 | CALIBRATOR | 1 | |
| CALBLK-STD-105 | V2/A4-20MM-Ø1.5MM CALIBRATION BLOCK | 1 | |
| CALBLK2.125 | BLOCK, CALIBRATION | 1 | |
| CALDATA_75 | CERTIFICATE OF COMPLIANCE AND CALIBRATION | 1 | |
| CALIB-PPAGPA | CALIBRATION BENCH CALIB-PPAGPA | 1 | |
| CALIB-UTILITY | CALIBRATION SOFTWARE CALIB-UTILITY VERSION 1.0HIGHER | 1 | |
| CALIBRATI0N | BARFIELD CALIBRATION CERTIFICATE, | 2 | |
| CALIBRATION | TVEU CALIBRATION | 2 | |
| CALIBRATION BLOCK 4.4 MS/M | CALIBRATION BLOCK SET FOR SB 53-1298 | 1 | |
| CALIBRATION BLOCK 58.5 MS/M | CALIBRATION BLOCK SET FOR SB 53-1298 | 1 | |
| CALIBRATION CERT | CALIBRATION SERVICE | 1 | |
| CALIBRATION FEE | CALIBRATION FEE | 1 | |
| CALIBRATION SPARE PARTS KIT | CALIBRATION SPARE PARTS KIT | 1 | |
| CALIBRATIONFEE | CALIBRATION FEE | 1 | |
| CALIBRATOR | CALIBRATOR TOOL | 1 | |
| CALKIT01 | CALIBRATION / REPAIR KIT | 1 | |
| CATPG2 | CALIBERS FOR HI-LOCK (BROWN TOOL) | 2 | |
| CBG-16-0-N-1 | COMBINED CALIBRATOR.CBG | 2 | |
| CBG-18-0-N-1 | MEASUREMENT VERIFICATION CALIBER, MADE OF BASE METAL, USED DURING AIRCRAFT REPAIR. | 3 | |
| CBG-18-1-N-1 | MEASUREMENT VERIFICATION CALIBER, MADE OF BASE METAL, USED DURING AIRCRAFT REPAIR. | 2 | |
| CBMG-16-0-N | CBMMG MANDRIL CALIBRATOR | 2 | |
| CC100-CC | CC100-CC;Provide Calibration Report for CSAM CC100 | 1 | |
| CCM600I | Wrench - torque calibrated 100-600 lb/ins | 1 | |
| CD-6"CXW | CALIBRADOR DIGITAL MITUTOYO | 1 | |
| CDI397-0022K | CALIBRATION BUTTON | 1 | |
| CE1331699-003 | 8 STEP THICKNESS CALIBRATION STANDARD. STEP SIZES: .025", .030", .035", .040", .045", .055", .060", .068" +/-.001". PAD SIZE 1.0" x 1.25" TYP. MATERIAL: 7475-T7351 ALUMINUM, CHROMIC ACID ANODIZED. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617528 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617529 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE2-40 | KEY COMPASS CALIB. | 24 | |
| CE9900085-101 | COMPOSITE LAMINATE CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900086-101 | COMPOSITE LAMINATE CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-001 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-003 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-005 | CALIBRATION REFERENCE STANDARD (CRS) | 1 | |
| CE9900088-007 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900088-009 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CE9900430-001 | COMPOSITE SANDWICH CALIBRATION REFERENCE STANDARD | 1 | |
| CEF 8676M3 | ECHS LOCK PORTABLE CALIBRATION | 1 | |
| CEF-8676M3 | ECHS LOCK PORTABLE CALIBRATION | 1 | |
| CEF8676M3 | ECHS LOCK PORTABLE CALIBRATION | 1 | |
| CEL-110-2 | ACCOUSTIC CALIBRATOR TOOL | 1 | |
| CEL-120/2 | CASELLA CEL CEL-120/2 SOUND LEVEL CALIBRATOR | 1 | |
| CEL-240-K1 | METER - SOUND LEVEL, 30 DB TO 135 DB, CALIBRATOR AND CASE | 5 | |
| CEL-240/K1 | METER - SOUND LEVEL, 30 DB TO 100 DB & 60 TO 130 DB, INCLUDING CALIBRATOR AND CASE | 5 | |
| CEL-254/K-1 | METER - SOUND LEVEL, 30 DB TO 135 DB, CALIBRATOR AND CASE | 2 | |
| CEL-254/K1 | METER - SOUND LEVEL, 30 DB TO 135 DB, CALIBRATOR AND CASE | 2 | |
| CERT-CAL-1 | CERT-CAL-1;1yr. Renewal Certified Calibration Contract - Existing Equipment | 1 | |
| CERT-CAL-DATA-3 | CERT-CAL-DATA-3;Certified Calibration Data - Pre and Post Cal Data Report for Care Plans | 1 | |
| CERT-CAL-DATA-4 | CERT-CAL-DATA-4;Certified Calibration Data - Pre and Post Cal Data Report for Care Plans | 1 | |
| CERT-CAL-DATA-5 | CERT-CAL-DATA-5;Certified Calibration Data - Pre and Post Cal Data Report for Care Plans | 1 | |
| CERTFEE | FACTORY ISO DIN9005 10 POINT CALIBRATION CERTIFICATE | 1 | |
| CF-1 | BATTERY CHARGER FIELD CALIBRATION TOOL | 1 | |
| CFM56 9970 | CALIBRATION BLOCK | 1 | |
| CFM56 9970-958-579 | CALIBRATION BLOCK | 2 | |
| CFSNC-250 | SONIC GAS FLOW CALIBRATOR (HIGH FLOW/HIGH ACCURACY) | 1 | |
| CG9000042-0007 | ENGINE BOOTSTRAP KIT (CALIBRATION) | 1 | |
| CG9000048-0001 | FIREX LEAK / OBSTRUCTION TEST KIT (CALIBRATION) | 1 | |
| CG9000088-0001 | AFT EQUIPMENT BAY INTERIOR PLATFORM (CALIBRATION) | 1 | |
| CG9121601-0001 | AIR TEST PANEL (0-100 PSIG) (CALIBRATION) | 1 | |
| CH5000E | Desktop Smart Battery Charger/Fuel Gauge Recalibrator | 1 | |
| CJMD156-101 | CALIBRATION STANDARD | 3 | |
| CL23A | TEMPERATURE CALIBRATOR (OMEGA ENGINEERING INC.) | 1 | |
| CL310 | CALIBRATOR | 1 | |
| CL427 | CALIBRATOR | 1 | |
| CL940A | 1. TEMPERATURE CALIBRATOR | 2 | |
| COM00555-1 | KIT PPP CALIBRATION - KIT PPP CALIBRATION | 1 | |
| COM01460 | CENTRIFUGE CALIBRATION | 1 | |
| CR052 | CALIBRE/PENTE DE ROSCAS - 52 LAMINAS | 1 | |
| CRS 1 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.020", 0.040", 0.060", 0.100", 0.150", 0.200" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS 2 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.100", 0.250", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS AL2024 | 5 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.200", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T351 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CS-1-ST-1E-LGDAS | CALIBRATION STAND | 1 | |
| CS-235-RC112 | CALIBRE ALERON R/H | 1 | |
| CS-235-RC113 | CALIBRE ALERON L/H | 1 | |
| CS-295-AG121 | Equipo limpieza y calibración inyectores C-295 | 1 | |
| CS-295-RC116 | CALIBRE PATRON REGLAJE | 1 | |
| CS-710-564 | (CALIBER) | 1 | |
| CS0007A | CALIBRATION PROGRAM | 1 | |
| CT | CART-VACUUM AIRFLOW (CALIBRATION) | 1 | |
| CT-200 | Calibration Kit for TS-200 ULB Tester | 2 | |
| CT-4-FRR | CT-4-FRR;Fixed Rate Repair and Calibration of CT-4 | 1 | |
| CTD4000-650 | TEMPERATURE DRY WELL CALIBRATOR | 1 | |
| CTS 30000 | WEIGHING SCALE WITH FRESH CALIBRATION CERTIFICATE | 1 | |
| CTS DHC29445-001 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| CTS2 | CALIBRATION TEST PIECE | 1 | |
| CU-124 | FUEL CALIBRATION UNIT | 1 | |
| CW-23 OW-47 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T7 or Equivalent Aluminum. FASTENER (NAS517-3-2) 2 Places. Includes Test Report and Certificate of Conformance For Standard and Certification for material and Fasteners. | 1 | |
| CW-23/OW-47 | C130J Calibration Standard 57-10-09 Pg 7-93 Fg 7-9 | 1 | |
| CX100-ASOL | CX100-ASOL;CX100 Calibrator Kit; Short Open Load; Cable | 1 | |
| CX100-C9001 | CX100-C9001;CX100 Calibration Certificate with Test Data - ISO 9001 | 1 | |
| CX100-SILVER-3 | CX100-SILVER-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 CX100 | 1 | |
| CX100-SILVER-5 | CX100-SILVER-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 CX100 | 1 | |
| CX300-ASOL | CALIBRATOR (SHORT-OPEN-LOAD) | 1 | |
| CX300-C9001 | CX300-C9001;CX300 Calibration Certificate with test data - ISO 9001 | 1 | |
| CX300-CCIOD | CX300-CCIOD;CX300-CAL;Calibration incoming and outgoing DATA-CX300 | 1 | |
| CX300-FRC | CX300-FRC;CX300-FRC;Fixed Rate Repair and Calibration - CX300 | 1 | |
| CX300-MAXCARE-3 | CX300-MAXCARE-3;3 Yr Total HW Warranty+Certified Calibrations+Loaner+Accessories-MAXCARE-3 | 1 | |
| CX300-MAXCARE-5 | CX300-MAXCARE-5;5 Yr Total HW Warranty+Certified Calibrations+Loaner+Accessories-MAXCARE-5 | 1 | |
| CX300-SILVER-3 | CX300-SILVER-3;3 Yr Total HW Warranty + Calibration with Certificate - SILVER-3 | 1 | |
| CX300-SILVER-5 | CX300-SILVER-5;5 Yr Total HW Warranty + Calibration with Certificate- SILVER-5 | 1 | |
| CX700-CRIM | CX700-CRIM;CX700 Radio Interface Module Calibration; includes Test Data | 1 | |
| CX700-FC | CX700-FC;CX700 Field Calibration and Verification Kit | 1 | |
| CX700-SILVER-3 | CX700-SILVER-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 CX700 | 1 | |
| CX700-SILVER-5 | CX700-SILVER-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 CX700 | 1 | |
| CX700-TDCMI | CX700-TDCMI;CX700 Depot Calibration and Maintenance Instructor Training | 1 | |
| CX700-TFCMI | CX700-TFCMI;CX700 Field Calibration and Maintenance Instructor Training | 1 | |
| CZ001-13 | RE-CALIBRATION OF TEST SET C/W 2 PROBES. | 1 | |
| D01066K2D1B01A0 | TRIPODJACK,TAIL(E170/190)(CALIBRATION)(CALIBRATION) | 1 | |
| D02538K2D1B01A0 | TRIPOD JACK, WING (E170/190) (CALIBRATION) | 1 | |
| D12-100 | CALIBRATING OIL,STANDARD | 1 | |
| D12-50 | CALIBRATING OIL,STANDARD | 1 | |
| D12-5 | CALIBRATING OIL,STANDARD | 1 | |
| D12-9892-04 | CALIBRADOR PERMASWAGE 1/4 DEUTSCH | 4 | |
| D12-9892-05 | CALIBRADOR PERMASWAGE 5/16 DEUTSCH | 2 | |
| D12-9892-06 | CALIBRATOR 3/8 DEUTSCH D12-9892-06 | 5 | |
| D12-9892-08 | CALIBRADOR PERMASWAGE 1/2 DEUTSCH D | 5 | |
| D12-9892-10 | CALIBRADOR PERMASWAGE DEUTSCH D12 | 4 | |
| D12-9892-12 | CALIBRADOR PERMASWAGE DEUTSCH 3/4 | 2 | |
| D12-9892-20 | DEUTSCH CALIBRATOR 20 | 1 | |
| D19-0 | CALIBRATING OIL,STANDARD | 1 | |
| D19748-101 | CALIBRATION FIXTURE | 1 | |
| D19748-105 | CALIBRATION FIXTURE | 1 | |
| D19748-109 | CALIBRATION FIXTURE | 1 | |
| D231-11-1 | CALIBRATION KIT | 1 | |
| D2887-148B | THERMAL CALIBRATION FIXTURE | 1 | |
| D2887-148B/A | THERMAL CALIBRATION FIXTURE BODY | 1 | |
| DAC ETOH AL | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAC ETOH FE | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAC ETOH TI | Multi Purpose Calibration Standard. 13 Basic Hole Sizes; 1/8, 5/32, 3/16, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. .030 x .030 x .005 Corner EDM Notches in each Hole, .020 x .005 Thru EDM Notch in holes less than 3/16. Mat | 1 | |
| DAV-EADT-SV11003 | DISKETTE WITH CALIBRATION PROGRAM | 1 | |
| DAWE1411E | ACOUSTIC CALIBRATOR TOOL | 1 | |
| DBS-CG1 | Electronic Calibration Instrument for DBS-1100 & DBS-1200 Series Banding Tools | 1 | |
| DBS-CG2 | CALIBRATION FIXTURE | 1 | |
| DBS-CG4D | Electronic Calibration Instrument for DBS-2200 and DBS-2100 | 1 | |
| DBSCG2 | CALIBRATION FIXTURE | 1 | |
| DC-400 | FUEL QUANTITV CALIBRATION (BARFIELD DC 400. MODEL 412) | 1 | |
| DC-700 | ELECTRONIC TEMPERATURE SENSOR TEST ADAPTOR SET, CALIBRATION SET. | 2 | |
| DC-700-A1 | CALIBRATION SET | 1 | |
| DC-700A1 | CALIBRATION SET | 1 | |
| DC-800-KAL | CALIBRATION SET FOR DC-800 | 1 | |
| DC400 | FUEL CALIBRATION | 1 | |
| DER4100TSP-1-CCIOD | DER4100TSP-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - DER4100TSP-1 | 1 | |
| DHC 25533-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 25533-003M | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29116-001 | deHAVILLAND DASH 8 LFEC CALIBRATION STANDARD. PART 6 53-30-31 PAGE 7 FIGURE 3. Includes Test Report and Certificate of Conformance. | 3 | |
| DHC 29116-007 | CALIBRATION TEST STANDARD, DASH8 PT6 53-30-01:PG7 FIG3 | 3 | |
| DHC 29117-001 | deHAVILLAND DASH 8 LFEC CALIBRATION STANDARD. PART 6 53-10-21 PAGE 5 FIGURE 3. Includes Test Report and Certificate of Conformance. | 3 | |
| DHC 29198-003 | CALIBRATION TEST STANDARD | 1 | |
| DHC 29298-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC 29381-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| DHC 29394-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29434-101 | CALIBRATIONTEST STANDARD (CTS) | 3 | |
| DHC 29435-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-61:PG7 FIG3 | 2 | |
| DHC 29438-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC 29442-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC 29443-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC 29445-001 | CALIBRATION TEST STANDARD | 3 | |
| DHC-25533-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29116-001 | Calibration Test Standard, DASH8 PT6 53-30-01:PG7 FIG3 | 3 | |
| DHC-29116-007 | Calibration Test Standard, DASH8 PT6 53-30-01:PG7 FIG3 | 3 | |
| DHC-29117-001 | Calibration Test Standard, DASH8 PT6 53-10-21:PG5 FIG3 | 3 | |
| DHC-29198-003 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29298-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29394-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29434-001 | Calibration Test Standard, DASH8 PT6 53-10-41:PG7 FIG2 | 1 | |
| DHC-29434-101 | Calibration Test Standard, DASH8 PT6 53-10-41:PG8 FIG2 | 3 | |
| DHC-29435-001 | Calibration Test Standard, DASH8 PT6 53-10-61:PG7 FIG3 | 2 | |
| DHC-29436-001 | Calibration Test Standard, DASH8 PT6 51-00-03:PG7 FIG3 | 1 | |
| DHC-29437-001 | Calibration Test Standard, DASH8 PT6 51-00-03:PG7 FIG4 | 1 | |
| DHC-29438-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC-29443-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC25533-001 | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC25533-003M | CALIBRATIONTEST STANDARD (CTS) | 1 | |
| DHC29116-001 | CALIBRATION KIT | 3 | |
| DHC29117-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-21:PG5 FIG3 | 3 | |
| DHC29198-003 | CALIBRATION TEST STANDARD | 1 | |
| DHC29298-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC29298-003 | NDT CALIBRATION STANDARD | 1 | |
| DHC29298-003. | NDT CALIBRATION TOOL FOR FLAP TRACKS | 1 | |
| DHC29381-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| DHC29394-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC29425-101 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| DHC29434-101 | CALIBRATIONTEST STANDARD (CTS) | 3 | |
| DHC29435-001 | CALIBRATION TEST STANDARD, DASH8 PT6 53-10-61:PG7 FIG3 | 2 | |
| DHC29436-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| DHC29437-001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| DHC29438-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC29442-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC29443-001 | CALIBRATION TEST STANDARD | 1 | |
| DHC29445-001 | CALIBRATION TEST STANDARD - Q400 | 3 | |
| DIK51-00 | DIGITAL DENT INSPECTION KIT (CALIBRATED) | 1 | |
| DLH537426400 | CALIBRADOR ALOJAMIENTO INYECTOR ENCENDIDO JT9D | 1 | |
| DLT01MAPM1012 | PRESSURE GAUGE 1-15000 PSI; CALIBRATED AND CERTIFIED IN THIS RANGE 0-15000 PSI (ONAC) WITH 3 READING | 5 | |
| DLTFRPSKT3004 | FIELD REPAIR KIT (CALIBRATION) | 11 | |
| DLTFRPSKT3028A | REPAIR KIT, FIELD - SIZE 04 TO (CALIBRATION) | 7 | |
| DMC684-4-COFC | CALIBRATION COFC W/READINGS PKG (15 PER KIT) | 1 | |
| DP1610 | CALIBRATION PRESSURE | 1 | |
| DP1615 | PRESSURE CALIBRATOR | 1 | |
| DPI 610 | DIGITAL PRESSURE CALIBRATOR | 11 | |
| DPI-603-AB | PRESSURE CALIBRATOR WITH VACUUM KIT & BATTERY KIT | 1 | |
| DPI-610 | Portable Pressure Calibrator | 11 | |
| DPI-610 AERO | AERO PORTABLE PRESSURE CALIBRATOR | 1 | |
| DPI-610 Aero | Aero Portable Pressure Calibrator | 1 | |
| DPI-615PC | Portable Pressure Calibrator | 1 | |
| DPI145 | MULTIFUNCTION PRESSURE CALIBRATOR | 3 | |
| DPI610 | PRESSURE CALIBRAT. | 11 | |
| DPI610 AERO | AERO PORTABLE PRESSURE CALIBRATOR | 1 | |
| DPI610-IS / DPI615-IS | Safe Portable Pressure Calibrator | 1 | |
| DPI610A | AERO PORTABLE PRESSURE CALIBRATOR | 3 | |
| DPI610E | TEST CELL PRESSURE CALIBRATOR, DRUCK | 1 | |
| DPI610PC | PORTABLE PRESSURE CALIBRATOR | 1 | |
| DPI611 | PORTABLE PRESSURE CALIBRATOR | 2 | |
| DPI611-07G | DPI 611 -1BAR TO 2BAR PRESSURE CALIBRATOR | 2 | |
| DPI611PC-13G | Pneumatic Calibrator,-15 to 300 PSIG | 1 | |
| DPI615 | PRESSURE CALIBRATOR DPI615 | 1 | |
| DPI615PC | PORTABLE PNEUMATIC CALIBRATOR | 1 | |
| DPI615SHC | PRESSURE CALIBRATOR DPI615 | 1 | |
| DPI615SPC | PRESSURE CALIBRATOR DPI615 | 1 | |
| DPI802 | PRESSURE LOOP CALIBRATOR | 1 | |
| DRT68837 | GAG GAG-BRAKE ROD (CALIBRATION) (CALIBRATION) | 9 | |
| DRT68838 | GAG GAG-SHOCK ABSORBER (CALIBRATION) (CALIBRATION) | 13 | |
| DRT68923 | GROUND LOCK SLEEVE_MLG (CALIBRATION) | 21 | |
| DRT74469 | BLOCK CALIBRATION | 2 | |
| DRT94869 | CALIBRATION BLOCK | 1 | |
| DRT95406 | CALIBRATION BLOCK | 1 | |
| DRT95819 | Calibration Block | 1 | |
| DRT96170 | CALIBRATION BLOCK | 1 | |
| DSAM-ON-CAL | DSAM-ON-CAL;DSAM Onsite Calibration Service | 1 | |
| DSAM2300-FRR | DSAM2300-FRR;Fixed Rate Repair and Calibration DSAM-2300 | 1 | |
| DSAM3300-FRR | DSAM3300-FRR;Fixed Rate Repair and Calibration for DSAM-3300 | 1 | |
| DSAM6300-CAL | DSAM6300-CAL;Service DSAM-6300 per Incident Calibration | 1 | |
| DSAM6X00-FRR | DSAM6X00-FRR;Fixed Rate Repair and Calibration DSAM-6X00 Series | 1 | |
| DSAMX500-FRR | DSAMX500-FRR;Fixed Rate Repair and Calibration DSAM-1500/-2500/-3500 Series | 1 | |
| DSAMX600-FRR | DSAMX600-FRR;Fixed Rate Repair and Calibration DSAM-2600/-3600 Series | 1 | |
| DTS005111 | CALIBRATION SQ DR ADAPTOR 1/4 | 1 | |
| DTS005113 | CALIBRATION SQ DR ADAPTOR 1/2 | 1 | |
| DTS005116 | CALIBRATION SQ DR ADAPTOR 3/8 | 1 | |
| DTS005119 | CALIBRATION SQ DR ADAPTOR 3/4 | 1 | |
| DZZ 0008-505 | CALIBRE PARA VÁLVULA ACTUADOR DE SPOILER | 2 | |
| DZZ7093-1 | THROTTLE SW CALIBLATION FIXTURE | 1 | |
| DZZ7177-1 | Tensiometer Calibration | 6 | |
| E0 8199-4F | CALIBRATION TEST STANDARD | 1 | |
| E10OTDRCR | E10OTDRCR;SMARTOTDR CALIBRATION REPORT | 1 | |
| E20292 | CALIBRATION PLATE | 1 | |
| E41OTDRCR | E41OTDRCR;OTDR Module Calibration Report | 1 | |
| E53-002 | CALIBRATION BLOCK SET EMBRAER | 1 | |
| E53-002C | CALIBRATION BLOCK SET, ALUMINUM 2024-T3, DIMENSION 160 X 135 MM FOR FUSELAGE SINGLE DOUBLER REPAIR’ | 1 | |
| E53-003 | CALIBRATION BLOCK (6SETS) AL 2024 T3 | 1 | |
| E53-003A | CALIBRATION BLOCK SET | 2 | |
| E53-003F | CALIBRATION BLOCK SET | 2 | |
| E53-004 | CALIBRATION BLOCK | 1 | |
| E53‐005 | CALIBRATION BLOCK | 1 | |
| E53‐006 | CALIBRATION BLOCK DIMENSIONS 95 X 90 MM, WITH 03 ALUMINUM PLATES, EDM NOTCH 10.6 MM | 1 | |
| E54-003 | EMBRAER 170/175 CALIBRATION STANDARD PT 4 54-50-00 Embraer 170 NDT 1967 Rev. 49, pages 11-13 and Embraer 175 NDT 5893 Rev. 25, pages 10-12. Includes Test Report and Certificate of Conformance. | 1 | |
| E54‐004 | CALIBRATION BLOCK MADE FROM TITANIUM ALLOY AND ALUMINUM ALLOY AL 7075 T351 | 1 | |
| E55‐001 | CALIBRATION BLOCK | 1 | |
| E55‐002 | CALIBRATION BLOCK | 1 | |
| E57‐009 | CALIBRATION BLOCK, ALUMINUM ALLOY WITH EDM NOTCHES | 1 | |
| E57‐010 | CALIBRATION BLOCK, ALUMINUM ALLOY WITH EDM NOTCHES | 1 | |
| E81BBSCR | E81BBSCR;BBS CALIBRATION REPORT | 1 | |
| E81BOTDRCR | E81BOTDRCR;Calibration Rapport for module Brillouin OTDR - EDFOS-MTS-x and EDFOS-OTU-x | 1 | |
| E81ODMCR | E81ODMCR;ODM Calibration Report | 1 | |
| E81OSA610B-CR | E81OSA610B-CR;OSA610B High resolution OSA module calibration report | 1 | |
| E81OTDRCR | E81OTDRCR;OTDR Module Calibration Report | 1 | |
| E9E48WDM1650-C | E9E48WDM1650-C;48 WDM 1650NM WITH 96 LC/APC FRT PANEL FOR OTU5K SHELF -2 SLOTS-Calib Ready | 1 | |
| E9ECOTU-PKG1-IA | E9ECOTU-PKG1-IA;OTU5000 2XACDC/1U/19 INCHES/1625NM/12 PORTS/CALIB/SMARTOTU | 1 | |
| EAM0005D40A | CALIBRATION WEIGHT | 1 | |
| EC TC | SIKA EC TC POCKET THERMOCOUPLE CALIBRATOR | 1 | |
| ECRS-0824/AL | ALUMINUM CALIBRATION STANDARD | 1 | |
| ECRS-0824/SS | "STAINLESS STEEL CALIBRATION STANDARD | 1 | |
| ECRS-0824/TI | "TITANIUM CALIBRATION STANDARD | 1 | |
| EG5AC300 | 3M SOUND LEVEL METER/CALIBRATOR | 1 | |
| EMB-E54-003 | CALIBRATION BLOCK ALUMINUM 7050-T7452 | 1 | |
| EMC-6 | CALIBRADOR PIE DE REY DIG | 1 | |
| EN 12223 | NDE TECH CALIBRATION BLOCK NO.1 K1 ALUMINUM EN12223 (IIW REF BLOCK) | 1 | |
| EN 27963 | V2 CALIBRATION BLOCK | 1 | |
| EN27963 | CALİBRATION BLOCK (K2) | 1 | |
| EO8199-4F | CALIBRATION TEST STANDARD, DASH8 | 1 | |
| EOTDR-TO-FCOMP-UPG | EOTDR-TO-FCOMP-UPG;ADD FIBERCOMPLETE TO 4100 B OTDR MODULES -IF MODULE PM IS CALIBRATED- | 1 | |
| EP-67000 | Banco limpieza y calibrción inyectores motor CT-7 | 1 | |
| ERJ170/190-945 | PITOT TUBE CALIBRATOR EQUIPMENT | 6 | |
| ERJ170/190-946 | PITOT TUBE CALIBRATOR EQUIPMENT | 13 | |
| ES750-51 | GAUGE-ENDPIECE + CALIBRATION CERTIFICATE | 16 | |
| ET002 | Brantly International B-2 Main Rotor Blade root skin inspection Fig1 calibration standard | 1 | |
| EWR203026 | CALIBRATION RING | 1 | |
| EX601R47015-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EX601R47015−001 | Calibration reference standard − piano hinge passenger door (Bombardier Inc.) | 1 | |
| EX601R51086-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EX601R51093 | Calibration reference standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EX604-60024 | CRJ700/900/1000 Calibration Standard PT6 53-11-108 PG19 FG4 | 2 | |
| EX604-60024-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EX604−60024 | Calibration reference standard multi−layered aluminum alloy fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 2 | |
| EX605 60034 001 | CRS CALIBRATION STANDARD | 1 | |
| EX605 60036 001 | CRS CALIBRATION STANDARD | 1 | |
| EX605−60037−001 | CALIBRATION REFERENCE STANDARD MADE FROM | 1 | |
| EXBC100-59009-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59040-005 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.000 IN. (76.20 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−001 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 4.224 IN. (107.29 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−003 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 3.374 IN. (85.70 MM)OUTSIDE DIAMETER 2.311 IN. (58.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−007 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.032 IN. (26.21 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−009 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.000 IN. (50.80 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−011 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.563 IN. (39.70 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59040−013 | CALIBRATION REFERENCE STANDARD ASSEMBLY 6AI-6V−2SN TITANIUM ALLOY 2.500 IN. (63.50 MM)OUTSIDE DIAMETER 1.332 IN. (33.83 MM) INSIDE DIAMETER (BOMBARDIER INC.) | 1 | |
| EXBC670-59045 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59046 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59066-001 | CALIBRATION REFERENCE STANDARD CONTAINS 0.250 IN | 1 | |
| EXBC670-59066−001 | CALIBRATION REFERENCE STANDARD CONTAINS 0.250 IN (6.35 MM) LONG0.005 IN. (0.127 MM) WIDE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59089-001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXBC670-59089−001 | CALIBRATION REFERENCE STANDARD SIMILAR IN MATERIAL AS THE INSPECTION AREA CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59133 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59141 | CALIBRATION REFERENCE STANDARD MULTI LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59142 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59143-001 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES. (MHIRJ) | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59148 | CALIBRATION REFERENCE STANDARD (CRS) MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59156 | CALIBRATION REFERENCE STANDARD MADE FROM MULTIPLE ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59157-003 | CALIBRATION REFERENCE STANDARD, MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXBC670-59158 | CALIBIRATION STANDARD | 1 | |
| EXBC670-59159 | CALIBRATION REFERENCE STANDARD(CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM)NOTCHES (MHIRJ). | 1 | |
| EXBC670-59160 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERED FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670-59161 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59162 | CALIBRATION REFERENCE STANDARD, ALUMINUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (MHIRJ OR EQUIVALENT) | 1 | |
| EXBC670-59163 | CALIBRATION REFERENCE STANDARD TITANIUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (BOMBARDIER INC.EQUIVALENT) | 1 | |
| EXBC670-59164 | CALIBRATION REFERENCE STANDARD MULTIPLE LAYERS ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59174 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59174-001 | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59176 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59178 | CALIBIRATION STANDARD | 1 | |
| EXBC670-59179 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670-59182 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ). | 1 | |
| EXBC670-59182-001FS | CALIBRATION REFERENCE STANDARD | 1 | |
| EXBC670-59183-001 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) TRANSDUCER - ANGLE BEAM, 5.0 MHZ, 0.375 IN. (9.53 MM) H X | 1 | |
| EXBC670-59185 | CALIBRATION REFERENCE STANDARD (CRS), MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| EXBC670−59040−001 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 4.224 in. (107.29 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−003 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.374 in. (85.70 mm)outside diameter 2.311 in. (58.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−005 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 3.000 in. (76.20 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−007 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.032 in. (26.21 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−009 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.000 in. (50.80 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−011 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.563 in. (39.70 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59040−013 | Calibration reference standard assembly 6AI−6V−2Sn titanium alloy 2.500 in. (63.50 mm)outside diameter 1.332 in. (33.83 mm) inside diameter (Bombardier Inc.) | 1 | |
| EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59045 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59046 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59065 | Calibration reference standard assembly aluminum and steel alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59066−001 | Calibration reference standard contains 0.250 in (6.35 mm) long0.005 in. (0.127 mm) wide electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59068 | Calibration reference standard multiple layered assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59089−001 | Calibration reference standard similar in material as the inspection area containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59094 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59098 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59099 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59101 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59125 | Calibration reference standard assembly contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59133 | Calibration reference standard made from aluminum alloy containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59134 | Calibration reference standard aluminum alloy that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59139−001 | Calibration reference standard made from aluminum alloy that contains electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59141 | Calibration reference standard multi layers fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59142 | Calibration Reference Standard made from aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59143 | Calibration Reference Standard assembly that contains electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59148 | Calibration Reference Standard (CRS) multiple layers fastened assembly that contains electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59154 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59156 | Calibration Reference Standard made from multiple aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59157 | Calibration reference standard multiple layered fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59158 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59159 | Calibration Reference Standard (CRS) multiple layers fastened assembly containing electrical discharge machined (EDM) notches (Bombardier Inc.). | 1 | |
| EXBC670−59161 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59162 | Calibration Reference Standard aluminum alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59163 | Calibration Reference Standard titanium alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59164 | Calibration Reference Standard multiple layers assembly that contains electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59174 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59176 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59178 | Calibration reference standard multiple layer fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBD 400-500-013 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD 400-50040 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| EXBD 400−50040 (1) | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION | 1 | |
| EXBD300-50041 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD300-50047-101 | CALIBRATION TEST STANDART | 1 | |
| EXBD40-50013-011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400-500-40-001 | CALIBRATION STANDARD | 3 | |
| EXBD400-5001-013 | CALIBRATION STANDARD | 1 | |
| EXBD400-50013-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50013-003 | Calibration Standard, 2024-T3 Clad, NAS1097AD4 Rivets, Paint.. | 1 | |
| EXBD400-50013-005 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50013-011 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50013-013 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50013−011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400-50013−013 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50023 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50023-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50027-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50040 | CALIBRATION TEST STANDARD FOR ULTRASONIC INSPECTION (DHC) | 1 | |
| EXBD400-50040-001 | CALIBRATION STANDARD | 3 | |
| EXBD400-50047-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50051-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50067-001 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| EXBD400-50068-101 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50068-103 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50068-105 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50069-001 | CALIBRATION STANDARD | 1 | |
| EXBD400-50069-003 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50069-004 | NDT CALIBRATION STANDARD | 1 | |
| EXBD400-50071-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50072-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50073-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50074-001 | CALIBRATION TEST STANDARD(CTS) | 2 | |
| EXBD400-50077-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50078-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50078-003 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-50078-103 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50078-105 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50078-109 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50078-111 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50093-005 | CALIBRATION TEST STANDARD (CTS), | 1 | |
| EXBD400-50151-003 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50151-007 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50152-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50152-007 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-50156-001 | CALIBRATION TEST STANDARDS CTSS | 1 | |
| EXBD400-50156-002 | CALIBRATION TEST STANDARDS CTSS | 1 | |
| EXBD400-50162-001 | CALIBRATION STANDARD | 1 | |
| EXBD400-50163-001 | CALIBRATION STANDARD | 1 | |
| EXBD400-51325- 101 | CALIBRATION TEST STANDARD | 2 | |
| EXBD400-51325-101 | CALIBRATION TEST STANDARD | 2 | |
| EXBD400-53070-001 | CALIBRATION TEST STANDARD(CTS) | 2 | |
| EXBD400-53081-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-54004-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-54006-001 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXBD400-54008−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-54009-001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-54009−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-54010-003 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-54010−001 | CALIBRATION TEST STANDARD1 | 1 | |
| EXBD400-54010−003 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-54011−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400-80003 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400-80005 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400−50013−011 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| EXBD400−50040−001 | CALIBRATION TEST SAMPLE | 3 | |
| EXBD400−50047−001 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| EXBD400−51325−101 | CALIBRATION TEST STANDARD (CTS) | 2 | |
| EXBD400−53085−003 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400−53087−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400−54008−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400−54009−001 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400−54010−001 | CALIBRATION TEST STANDARD1 | 1 | |
| EXBD400−54010−003 | CALIBRATION TEST STANDARD | 1 | |
| EXBD400−54011−001 | CALIBRATION TEST STANDARD | 1 | |
| EXCM601R30014 | CALIBRATION STANDARD | 1 | |
| EXDB400−50093−005 | CALIBRATION TEST STANDARD(CTS) | 1 | |
| EXGC926-7008-0 | CALIBRATION STANDARD | 1 | |
| EXGC926-7008-001 | USED TO CALIBRATE NDT TESTER | 2 | |
| EXGC926-7011-001 | CALIBRATION STANDARD ASSY | 1 | |
| EXGD922-0123-1 | CALIBRATION BLOCK | 1 | |
| EXGM922-5001-23 | CALIBRATION BLOCK | 1 | |
| EXGM922-5004-1 | CALIBRATION BLOCK | 1 | |
| EXSH670-31001-1 | CALIBRATION REFERENCE STANDARD, STGR15R BUTT JOINT, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ) | 1 | |
| EXSH670-31001−1 | CALIBRATION REFERENCE STANDARD STGR15R BUTT JOINT CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31002-1 | CALIBRATION REFERENCE STANDARD STGR1L AND STGR20L BUTT JOINTS CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31007-15 | NDT CALIBRATION, SKIN JOINT STGR 7 AND 20, FS 669.40 - 855.40 TEST PIECE (MHIRJ) | 1 | |
| EXSH670-31011−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH670-31022-1 | NDT CALIBRATION, UPPER HINGE AND LATCH BEAM TEST PIECE (MHIRJ) | 1 | |
| EXSH670-31022−1 | NDT CALIBRATION UPPER HINGE AND LATCH BEAM TEST PIECE (BOMBARDIER INC.) | 1 | |
| EXSH670-35910-1 | CALIBRATION REFERENCE STANDARD, ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670-35910−1 | CALIBRATION REFERENCE STANDARD ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES | 1 | |
| EXSH670−31001−1 | Calibration reference standard STGR15R butt joint contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31002−1 | Calibration reference standard STGR1L and STGR20L butt joints contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31011−1 | Calibration reference standard assembly that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH670−31014−1 | Calibration reference standard pressure bulkhead machined frames FS693.00 and FS847.00 contains subsurface electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EXSH670−31022−1 | NDT calibration upper hinge and latch beam test piece (Bombardier Inc.) | 1 | |
| EXSH670−35910−1 | Calibration Reference Standard assembly that contains electrical discharge machined notches | 1 | |
| EXSH690-31003−11 | CALIBRATION REFERENCE STANDARD EMERGENCY EXIT DOOR SURROUND STRUCTURE CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH690-31022 | CALIBRATION REFERENCE STANDARD POTABLE WATER. | 1 | |
| EXSH690-31023-1 | CALIBRATION REFERENCE STANDARD, CIRCUMFERENTIAL SKIN JOINT STGR7 TEST PIECE, CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (MHIRJ) | 1 | |
| EXSH690-31023−1 | CALIBRATION REFERENCE STANDARD CIRCUMFERENTIAL SKIN JOINT STGR7 TEST PIECE CONTAINS SURFACE AND SUBSURFACE ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXSH690−31003−11 | Calibration reference standard emergency exit door surround structure contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH690−31022 | Calibration reference standard potable water. | 1 | |
| EXSH690−31023−1 | Calibration reference standard circumferential skin joint STGR7 test piece contains surface and subsurface electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXSH698-31024-1 | CALIBRATION REFERENCE STANDARD | 1 | |
| F1274126 | MECHANICAL CALIBRATION BENCH | 1 | |
| F1278252 | MECHANICAL CALIBRATION BENCH | 1 | |
| F27598000 | CALIBRATION KIT | 1 | |
| F27786-181 | CALIBRATOR | 1 | |
| F50B955604005 | CALIBRATION PLATE FOR FIN FORWARD FITTING | 1 | |
| F50B955604007 | CALIBRATION PLATE FOR FIN REAR FITTING | 1 | |
| F50B955604009 | CALIBRATION PLATE FOR FUSELAGE FIN FORWARD FITTING | 1 | |
| F50B955604011 | CALIBRATION PLATE FOR FUSELAGE FIN REAR FITTING | 1 | |
| F50B955604013 | CALIBRATION PLATE FOR HORIZONTAL STABILIZER REAR FITTING | 1 | |
| F50B955604015 | CALIBRATION PLATE | 1 | |
| F50B955604017 | CALIBRATION PLATE FOR HORIZONTAL STABILIZER FORWARD FITTING | 1 | |
| F601R2330TFIX1-1 | CLAMP ASSY - SOUND LEVEL CALIBRATOR | 1 | |
| F70199-2 | Boeing F70199-2 Tire Inflation 300 PSI Calibrated Gauge Only | 7 | |
| F70199-30 | BOEING F70199-2 TIRE INFLATION 300 PSI CALIBRATED GAUGE ONLY | 2 | |
| F70207-109 | RIG PIN KIT (DFDR CALIBRATION) | 27 | |
| F70308-10 | Calibration Tag | 1 | |
| F71329 | TRACER-LEAKAGE(CALIBRATION)(CALIBRATION) | 17 | |
| F72731-115 | CALIBRATION FUEL QTY | 3 | |
| F72731-117 | CALIBRATION FUEL QTY | 2 | |
| F72785-13 | FIXTURE CALIBRATOR | 4 | |
| F72785-550 | TEST GAGE-CALIBRATE | 2 | |
| F72786-1 | PORTABLE ANGLE / CALIBRATOR | 2 | |
| F72786-101 | CALIBRATOR PORTABLE ALIGNMENT | 6 | |
| F72786-102 | CALIBRATION ALIGNMENT TOOL | 1 | |
| F72786-181 | CALIBRATION EQUIPMENT ANGLE OF ATTACK SENSOR | 12 | |
| F72786-181 AOAS | CALIBRATOR,ANGLE OF AIRFLOW SENSOR | 1 | |
| F72856-1 | CALIBRATION EQPT -0 AIRFLOW SENSOR | 1 | |
| F72856-102 | ANGLE OF ATTACK CALIBRATION ALIGNMENT ASSEMBLY | 1 | |
| F72856-132 | CALIBRATION EQPT -0 AIRFLOW SENSOR | 1 | |
| F72856-133 | CALIBRATION EQPT -0 AIRFLOW SENSOR | 1 | |
| F72856-142 | CALIBRATION EQPT -0 AIRFLOW SENSOR | 1 | |
| F72856-2 | CALIBRATION EQPT -0 AIRFLOW SENSOR | 1 | |
| F80217-139 | AUTO PILOT TEST SET (CALIBRATION) | 10 | |
| F80229-69 | Test Equipment Calibration | 18 | |
| F80229-69 Cal Fee | CALIBRATION SERVICE | 1 | |
| FBM320 | 20-BLADE GAP CALIBRATOR - SNAP-ON | 3 | |
| FCB 12K1 G60:G61 | BALANZA DIGITAL - KERN COUNT SCALE 0,1G - 12KG INCL. CALIBRATION CERTIFICATE | 1 | |
| FDIX100 | Digital force 50 X 0,2LBF incl. Calibration | 7 | |
| FDIX50 | DECGAUGE-FORCE,PUSH/PULL/SPRINGSCALE(CALIBRATION) | 4 | |
| FEN352A21 (CALIB) | TRIPOD JACK (CALIBRATION) | 1 | |
| FI-60-CAL | FI-60-CAL;Certified Calibration for FIT Power meters/FI-60/MP-60/VP-60/OP-1 | 1 | |
| FIT-CALREPORT | FIT-CALREPORT;Calibration Report for FIT Optical PMS | 1 | |
| FL7441-1 | PRESSURE CALIBRATION KIT | 1 | |
| FLEETCARE-CAL | FLEETCARE-CAL;Service Fleetcare Calibration Plan | 1 | |
| FLEETCARE-CALC-C | FLEETCARE-CALC-C;Fleetcare Calibration Plan Contract Item | 1 | |
| FLU1256480 | CALIB CERT Z540 W/DATA | 1 | |
| FLUKE 1507 | CAL MEGOHMMETER/INSULATION RESISTANCE TESTER WITH NIST CALIBRATION, | 10 | |
| FLUKE 5502-A | FOR ELECTRO TECHNICAL CALIBRATION | 1 | |
| FLUKE 5502-E | FLUKE MULTIFUNCTION PRODUCT CALIBRATOR AND ACCESSORIES | 1 | |
| FLUKE 5522-A | FOR ELECTRO TECHNICAL CALIBRATION | 1 | |
| FLUKE 5540A | SPEC / 5540A STANDARD MULTI-PRODUCT CALIBRATOR | 1 | |
| FLUKE 5730-A | FOR ELECTRO TECHNICAL CALIBRATION | 1 | |
| FLUKE 700G | FLUKE PRESSURE GAGE CALIBRATOR | 1 | |
| FLUKE 700G07 | PRESSURE GAUGE CALIBRATOR | 1 | |
| FLUKE 700PTP-1 | FLUKE CALIBRATOR TQ (HAND PUMP) | 1 | |
| FLUKE 718 30G | CALIBRATOR - PRESSURE, FLUKE | 4 | |
| FLUKE 729 | AUTOMATIC PRESSURE CALIBRATOR | 1 | |
| FLUKE 753 | PROCESS CALIBRATOR, MULTIFUNCTION | 3 | |
| FLUKE 754 | PROCESS CALIBRATOR (PRESSURE CALIBRATOR) | 1 | |
| FLUKE 8508-A | FOR ELECTRO TECHNICAL CALIBRATION | 1 | |
| FLUKE 8588-A | FOR ELECTRO TECHNICAL CALIBRATION | 1 | |
| FLUKE 8846-A | FOR ELECTRO TECHNICAL CALIBRATION | 1 | |
| FLUKE-718 30US | CALIBRATOR - PRESSURE, FLUKE | 2 | |
| FLUKE27II | MULTIMETER W/O CALIBRATION | 4 | |
| FLUKE718 | PRESSURE CALIBRATOR | 1 | |
| FLUKE718 30G | CALIBRATOR - PRESSURE, FLUKE 718 SERIES | 4 | |
| FLUKE71830G | CALIBRATOR - PRESSURE, FLUKE 718 SERIES | 4 | |
| FLUKE725 | CALIBRATOR MULTIFUNCTION PROCESS | 2 | |
| FLUKE77-4 | CALIBRATED DIGITAL MULTIMETER | 4 | |
| FMG4400DE | FLASH MEASURING TESTER (CALIBRATION) | 5 | |
| FMG4400DE (CAL) | FLASH MEASURING TESTER (CALIBRATION) | 1 | |
| FOKKER-50/60 | FOKKER 50/60 CALIBRATION STANDARD PART 6 53-30-09 PAGE 6 FIGURE 3. MATERIAL: 2024-T3 ALUMINUM. NOTE: ***DOES NOT INCLUDE 3M BELLY PROTECTIVE TAPE 8641 | 1 | |
| FON610PC300A | PORTBLE PREM DIGITAL CALIBRATR | 1 | |
| FON802PDSPLC | SUAL SENSR PRE LOOP CALIBRATOR | 1 | |
| Fluke 718 300G | PRESSURE CALIBRATOR | 1 | |
| Fluke 718 30US | CALIBRATOR - PRESSURE, FLUKE | 2 | |
| G.34-002-1 | STALL VANE CALIBRATOR | 21 | |
| G101-CCIOD | G101-CCIOD;Certified Calibration with Incoming and Outgoing DATA - G101 | 1 | |
| G26006-61 | CLEANNING EQPT. - SMOKE DETECTION SYSTEM (CALIBRATION) | 4 | |
| G28002 | TEST EQPT -0 VOLUMETRIC TOP-OFF CALIBRATION | 1 | |
| G28002-48 | TEST EQUIPMENT - VOLUMETRIC TOP-OFF CALIBRATION | 2 | |
| G28006 | ADAPTER EQUIPMENT -0 CALIBRATION, FUEL QUANTITY | 1 | |
| G28006-1 | ADAPTER EQUIPMENT - CALIBRATION, FUEL QUANTITY TOTALIZER | 1 | |
| G32011-1 | CALIBRATION EQPT | 6 | |
| G32029-2 | TORQUE EQUIPMENT - TRUNNION BOLTS, NOSE LANDING GEAR (CALIBRATION EQUIPMENT) | 2 | |
| G34001 | CALIBRATION FIXTURE -0 ANGLE OF ATTACK SENSOR | 1 | |
| G34001-1 | CALIBRATION FIXTURE - ANGLE OF ATTACK SENSOR | 1 | |
| G34001-2 | CALIBRATION FIXTURE - ANGLE OF ATTACK SENSOR | 1 | |
| G34002 | Portable Calibrator | 2 | |
| G34002-1 | CALIBRATION EQUIPMENT - ANGLE OF ATTACK SENSOR | 21 | |
| G34002-1-M | CALIBRATION EQPT | 1 | |
| G34002-11 | CALIBRATION FIXTURE | 1 | |
| G34002-2 | CALIBRATION EQUIPMENT - ANGLE OF ATTACK SENSOR | 2 | |
| G34002-3 | CALIBRATION EQUIPMENT - ANGLE OF ATTACK SENSOR | 4 | |
| G34002-4 | CALIBRATION EQUIPMENT - ANGLE OF ATTACK SENSOR | 1 | |
| G34002-5 | CALIBRATION EQUIPMENT - ANGLE OF ATTACK SENSOR | 7 | |
| G34002-6 | Calibration Fixture | 1 | |
| G34005-5 | FIXTURE TEST CALIBRA | 1 | |
| G3400J2-1 | PORTABLE CALIBRATOR | 1 | |
| G600-272004-1 | Calibration Weight | 1 | |
| G600−272004−1 | Calibration Weight | 1 | |
| G601R326101-1 | Target - Calibrated Proximity Sensor | 8 | |
| G601R326101-21 | Target - Calibrated Proximity Sensor | 1 | |
| G601R572101-1 | CALIBRATION STANDARD - EDDY CURRENT INSPECTION (4777 CYCLES) | 1 | |
| G601R572101−1 | Calibration Standard − Eddy Current Inspection (4777 cycles) | 1 | |
| G604-326101-1 | Target - Calibrated Proximity Sensor | 4 | |
| G604-326101-25 | ANTI-TARGET CALIBRATED PROXIMITY SENSOR | 1 | |
| G604-326101???1 | TARGET - CALIBRATED PROXIMITY SENSOR | 4 | |
| G604-326101−1 | TARGET - CALIBRATED PROXIMITY SENSOR | 4 | |
| G604-326102-25 | ANTI TARGET CALIBRATED PROXIMITY SENSOR | 5 | |
| G604-326102−25 | ANTI-TARGET − CALIBRATED PROXIMITY | 5 | |
| G604−326101−1 | TARGET − CALIBRATED PROXIMITY SENSOR | 4 | |
| G604−326102−25 | ANTI−TARGET − CALIBRATED PROXIMITY | 5 | |
| G71037-145 | Load cell calibration kit | 2 | |
| G71051-1 | CALIBRATION KIT - LOAD CELL SYSTEM (CE) | 5 | |
| G71501-1 | LOAD CELL SYSTEM CALIBRATION KIT | 1 | |
| G8DHC510001-1 | CALIBRATION KIT | 1 | |
| G8DHC510002-1 | CALIBRATION KIT | 1 | |
| GDM-8261A | MULTIMETER CALIBRATOR 6 1/2 D | 1 | |
| GE DRUCK DPI 603 | PORTABLE PRESSURE CALIBRATOR | 1 | |
| GE-FQAP-112 | CALIBRATION STANDARD | 1 | |
| GM-D-62051 | TYRE INFLATOR KIT MK3 – CALIBRATED | 1 | |
| GPSG-1000-3 | GPSG-1000-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| GPSG-1000-5 | GPSG-1000-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| GPSG1000-CCIOD | GPSG1000-CCIOD;Certified Calibration with Incoming and Outgoing DATA - GPSG1000 | 1 | |
| GS10181 | COVER-CONTROL CALIBRAT | 1 | |
| GS11066 | COVER CONTROL CALIBRAT | 1 | |
| GS11449 | FIXTURE CALIB LS&DEM S | 1 | |
| GS11451 | FIXTURE CALIB LM SENSO | 1 | |
| GS11453 | FIXTURE CALIBRATION JP | 1 | |
| GS11913 | DRY CALIBRATION FIXTURE | 1 | |
| GS12773 | COVER CALIBRATE | 1 | |
| GS12773-1 | COVER, CALIBRATE | 1 | |
| GS13617-1 | WMBP CALIBRATION CAP FIXTURE | 1 | |
| GS13950-1 | FIXTURE, CALIBRATION | 1 | |
| GS14027-1 | FIXTURE, CALIBRA | 1 | |
| GS15667-1 | CALIBRATION COVER | 1 | |
| GS15702-1 | FIXTURE, DRY CALIBRATION | 1 | |
| GS18302-1 | CALIBRATION TOOL,BETA VALVE | 1 | |
| GS20261-1 | FIXTURE, CALIBRATION, PC FLAPPER | 1 | |
| GS20286-1 | FIXTURE, DRY CALIBRATION | 1 | |
| GS20769-1 | TOOL, SPRING CALIBRATION | 1 | |
| GS20951-1 | COVER CALIBRATION | 2 | |
| GS20951-1 | Calibration Cover | 2 | |
| GS23590-1 | TEST BOX, DRY CALIBRATION | 1 | |
| GSB2000017 | MC-1010 Multifunction Calibrator | 1 | |
| GSB2330002 | CALIBRATOR : METER | 1 | |
| GSB2330003 | Calibrator − Sound Level | 3 | |
| GSB23630003 | CALIBRATOR SOUND LEVEL | 1 | |
| GSB2730001 | KIT-LIFT TRANSDUCER CALIBRATION | 2 | |
| GSB5180003 | Calibration Standard | 1 | |
| GSE 021 | PITOT TUBE CALIBRATOR EQUIPMENT | 1 | |
| GSE 206 | Calibration Standard, Embraer 190 PART 1 51-00-00 PG 4, 7050-T7 *same as 145-44131-001* | 1 | |
| GSE 32-61-01 | TARGET - CALIBRATED PROXIMITY SENSOR | 1 | |
| GSE 449 | Calibration Standard, Embraer 190 PART 1 51-00-00 PG 5, 15-5PH *same as 145-44131-003* | 1 | |
| GSE 450 | Calibration Standard, Embraer 190 PART 1 51-00-00 PG 6, 6AL-4V *same as 145-44131-005* | 1 | |
| GSE 503 | CALIBRATION STANDARD | 1 | |
| GSE 506 | EMBRAER 170/175/190/195 CALIBRATION STANDARD. PART NUMBER 171T17973-401. Includes Test Report and Certificate of Conformance. | 1 | |
| GSE115 | BOOTSTRAP, SET-INSTL/RMV, ENGINE (CALIBRATION) | 3 | |
| GSE426 | CALIBRATION TOOL | 1 | |
| GSS-ONSITECAL | GSS-ONSITECAL;Onsite Calibration | 1 | |
| GTP-322 | FLUORESCING STANDARD CALIBRATION PAD GPT-32 | 1 | |
| GTP-765 | SCREWDRIVER, CALIBRATING | 1 | |
| GTS2 | CALIBRATION TEST STANDARD 2 | 1 | |
| Gedore-2529858 | Gedore 2529858 DREMOTEST E 3000 - Torque Calibration Analysers, Range : 500-3000 N.m / 369-2214 lbf·ft | 1 | |
| Genrad 1565-B | Sound Level Meter & 1987 Minical Calibrator Set w/ Case | 1 | |
| H294 | Temperature Calibration Tester | 3 | |
| H394-230 | TEMPERATURE CALIBRATOR | 3 | |
| H394R | TEMPERATURE CALIBRATION TESTER | 8 | |
| HAV-501 | AIR ADJUSTING VALVE WITH GAUGE: AIR FLOW CONTROL VALVE | DEVILBISS WITH CALIBRATION | 1 | |
| HC-1042 | Pressure Gauge 0-5000 PSI (Calibrated) | 4 | |
| HC-1783 | PRESSURE GAUGE 0-3000PSI WITH CALIBRATION CERT | 4 | |
| HC-1831 | GAUGE: PRESSURE,0-160PSI, W/CALIBRATION CERTS | 3 | |
| HC-2075-A1 | FLOWMETER (CALIBRATED) | 1 | |
| HC1831 | GAUGE: PRESSURE,0-160PSI, W/CALIBRATION CERTS | 3 | |
| HCS2051 | BONDER CALIBRATION KIT | 1 | |
| HCS2051-01-001 | CALIBRATOR | 1 | |
| HCS2051-01-002 | GAUGE, CALIBRATION 30 IN/MG | 1 | |
| HCU-200-CCWA | HCU-200-CCWA;Service HCU200 Calibration | 1 | |
| HFM-D-300 | MASS FLOWMETER REFERENCED TO 21.1 °C @ 760 MMHG CALIBRATED FOR OXYGEN (0 - 6 LPM) - REGULATOR FLOW ACCURACY TESTING AND ADJUSTMENT | 1 | |
| HOWELL H294 | TEMPERATURE CALIBRATION TEST SET | 1 | |
| HP85032B | CALIBRATION KIT | 1 | |
| HP85032E | CALIBRATION KIT | 1 | |
| HPC41-300PSI-N-AHX | PRESSURE CALIBRATOR | 1 | |
| HPK-67 | SIGHT COMPASS(CALIBRATE COMPASS) | 1 | |
| HPS1 3059A | AUTOMATIC 100 - GAUSS HELMHOLTZ CALIBRAR (PRODUCT NUMBER 11-08-03-04) | 1 | |
| HPS1-3059A | AUTOMATIC 100 - GAUSS HELMHOLTZ CALIBRAT (PRODUCT NUMBER: 11-08-03-04) | 1 | |
| HS3375 | PIN,CALIBRATING,SER | 1 | |
| HS7152 | PIN CALIBRATING | 1 | |
| HS7164 | FIXTURE - VALVE CALIBRATING | 1 | |
| HS8168 | GAGE CALIBRATING COVER | 1 | |
| HST/SIM-FRCB | HST/SIM-FRCB;Fixed Rate Repair and Calibration for HST-3000 and one SIM module | 1 | |
| HST3000-FRC | HST3000-FRC;Fixed Rate Repair and Calibration for HST 3000 Mainframe only | 1 | |
| HSTSIM-FRC | HSTSIM-FRC;Fixed Rate Repair and Calibration for SIM only | 1 | |
| HU56545-2 | LIFTER, GEARBOX ACCESSOIRES (CALIBRATION) | 2 | |
| HU80624-2 | FIXTURE (CALIBRATION) (CALIBRATION) | 1 | |
| HU81854 | CALIBRATION PIECE | 1 | |
| HU81900 | CALIBRATION BLOCK | 1 | |
| HU82381 | HAND PUMP – TRUST REVERSER CALIBRATION CALIBRAT | 1 | |
| HU82386 | CALIBRATION BLADE (FOR M403T) | 1 | |
| I05081M020 | ANTISTATIC SURFACE TESTER (CALIBRATION) | 1 | |
| I1402-CCIOD | I1402-CCIOD;Certified Calibration with Incoming and Outgoing DATA - I1402 | 1 | |
| IAE 1P16032 | IAE 1P16032 CALIBRATION WEIGHT | 1 | |
| IAE 1P16033 | IAE 1P16033 CALIBRATION WEIGHT | 1 | |
| IAE 1P16442 | IAE 1P16442 CALIBRATION WEIGHT | 1 | |
| IAE1P16006 | BALANCE FIXTURE (7 PC ASSY) (CALIBRATED) | 1 | |
| IAE1P16033 | WEIGHT, CALIBRATION | 1 | |
| IAE1R18731 | BLADE, CALIBRATION | 1 | |
| IAE2P18879 | CALIBRATION BLOCK | 1 | |
| IAE2R18939 | CALIBRATION BLOCK | 1 | |
| IAE2R19426 | TEST BLOCK- CALIBRATION | 2 | |
| IAE2R19426B | Calibration Block | 1 | |
| IAE2R19741 | METHOD2 - CALIBRATION BLADEQC6808 | 1 | |
| IAE2R19819 | CALIBRATION WORKING STANDARD | 1 | |
| IAE3R18011 | THICKNESS CALIBRATION GAGE | 1 | |
| IAE3R18011 | Thickness calibration gage | 1 | |
| IDGR54E02 | IDG REM/INST DEV (CALIBRATION) | 1 | |
| IF1271 | CALIBRATED STEP GAUGE | 1 | |
| IFF-45-3 | IFF-45-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| IFF-45-5 | IFF-45-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| IFR 4000 | TEST UNIT,CALIBRA-TION-MKR/NAV/COMM RAMP/BENCH | 33 | |
| IFR4000 | TEST UNIT,CALIBRA-TION-MKR/NAV/COMM RAMP/BENCH | 33 | |
| IFR4000-3 | IFR4000-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| IFR4000-5 | IFR4000-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| IFR4000-EMB | TEST UNIT,CALIBRA-TION-MKR/NAV/COMM RAMP/BENCH | 4 | |
| IFR6000-3 | IFR6000-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| IFR6000-5 | IFR6000-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| IFR6015-3 | IFR6015-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| IFR6015-5 | IFR6015-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| IIW TYPE 2 | CALIBRATION REFERENCE STANDARD BLOCK, ALUMINUM. (GE OR EQUIVALENT) | 1 | |
| IIW-TYPE 2 | CALIBRATION BLOCK | 1 | |
| IIWTYPE1 | CALIBRATION BLOCK | 1 | |
| INCONEL718 | NDT, STANDARDS, CALIBRATION | 1 | |
| IPBT-WRENCH-4N | DIGITAL TORQUE WRENCH CALIBRATED 0.4 - 4N-M (3.5 - 35 IN-LB) - 1/4" FEMALE DRIVE, INCLUDING CALIBRATION | 1 | |
| IS31 | PRESSURE CALIBRATOR 2BAR | 1 | |
| IS33 | PRESSURE CALIBRATOR 20/200 BAR | 1 | |
| ISO-CALN-V7X | ISO 17025 CALIBRATION WITH DATA | 1 | |
| IW-V1 | CALIBRATION TEST PIECE | 1 | |
| J07013-1 | JACKING EQPT MLG AXLE CALIBRATION CALIBRATION | 11 | |
| J27008-13 | SLING - REMOVAL/INSTALLATION, AILERON (CALIBRATION) | 6 | |
| J27017-5 | CALIBRATION BLOCK | 1 | |
| J27017-6 | CALIBRATION BLOCK | 1 | |
| J27020-10 | Calibration block | 1 | |
| J27020-9 | Calibration block | 1 | |
| J46002-201 | CALIBRATOR ASSY | 1 | |
| J46002-202 | CALIBRATOR ASSY | 1 | |
| J46002-203 | CALIBRATOR ASSY | 1 | |
| J46002-204 | CALIBRATOR ASSY | 1 | |
| J46002-205 | CALIBRATOR ASSY | 1 | |
| J46002-217 | CALIBRATOR ASSEMBLY | 1 | |
| J46002-217-REVF | CALIBRATOR ASSY | 1 | |
| JD720C100 | JD720C100;Certificate of Calibration with Test Data | 1 | |
| JD723/4-CAL | JD723/4-CAL;Certified Calibration for JD723/724 | 1 | |
| JD723CB001 | JD723CB001;Bundle 1: JD723C, OSL Calibration Kit (N), 3M Cable (N) | 1 | |
| JD724CB001 | JD724CB001;Bundle 1: JD724C, OSL Calibration Kit (N), 3M Cable (N) | 1 | |
| JD725-CP | JD725-CP;Contract - 1 Calibration over 1 year period for JD725 | 1 | |
| JD725/726-CAL | JD725/726-CAL;Certified Calibration for JD725/726 | 1 | |
| JD731/2/3/4/6-CP | JD731/2/3/4/6-CP;Contract - 1 Calibration over 1 year period for JD73x unit | 1 | |
| JD731/33-FRR | JD731/33-FRR;Fixed Rate Repair and Calibration JD731/33 | 1 | |
| JD745-CAL | JD745-CAL;Certified Calibration for JD745 | 1 | |
| JD745B200 | JD745B200;Calibration Service for Asia_North America for JD745B | 1 | |
| JD746B-CAL | JD746B-CAL;Certified Calibration for JD746B | 1 | |
| JD748-CAL | JD748-CAL;Certified Calibration for JD748 | 1 | |
| JD748B200 | JD748B200;Calibration Service for Asia_North America for JD748B | 1 | |
| JD78050507 | JD78050507;DUAL PORT CALIBRATION KIT TYPE-N_DC TO 6 GHZ_50 OHM | 1 | |
| JD78050508 | JD78050508;Dual Port DIN 6 GHz Calibration Kit | 1 | |
| JD78050509 | JD78050509;Y- CALIBRATION KIT TYPE-N_M _DC TO 6 GHZ_50 OHM | 1 | |
| JD78050510 | JD78050510;Y- Calibration Kit DIN_m_DC to 6 GHz_50 ohm | 1 | |
| JD780B100 | JD780B100;Calibration Report for JD780B JD780A and JD740B series | 1 | |
| JD785-CAL | JD785-CAL;Certified Calibration for JD785 | 1 | |
| JD785B200 | JD785B200;Calibration Service for Asia_North America for JD785B | 1 | |
| JD785B201 | JD785B201;Calibration Service for Latin America_EMEA for JD785B | 1 | |
| JD786A-CAL | JD786A-CAL;Certified Calibration for JD786A | 1 | |
| JD788-CAL | JD788-CAL;Certified Calibration for JD788 | 1 | |
| JT-147A | CALIBRATION TEST SET | 3 | |
| K1 | CALIBRATION STANDARD | 4 | |
| K2 | CALIBRATION STANDARD | 7 | |
| K20008-55 | HOISTING DEVICE (CALIBRATION) | 10 | |
| K21006-46 | JACK ADAPTER (CALIBRATION) | 3 | |
| K27068- 8 | MEASURING TOOL - ENCODER CALIBRATIONSET | 1 | |
| K27068-10 | MEASURING TOOL - ENCODER CALIB | 7 | |
| K27068-21 | ENCODER CALIBRATION ADAPTER SET | 1 | |
| K27068-9 | ENCODER CALIBRATION SET | 8 | |
| K46002-3 | CALIBRATOR ASSY | 1 | |
| K71001-134 | LOAD CELL SYSTEM CALIBRATION KIT | 1 | |
| K71002-142 | Load cell system calibration kit | 1 | |
| K71009-36 | SLING - FAN COWL, GENX-1B ENG. (CALIBRATION) | 7 | |
| K777 | BOX CALIBRATOR (T477 | 1 | |
| K777 (C15293) | CALIBRATION BOX | 1 | |
| K78009-1 (CALIB) | THRUST REVERSER (CALIBRATION) | 2 | |
| KHT8-755-01 | Target - Calibrated Proximity Sensor | 6 | |
| KHT8−755−01 | Target − Calibrated Proximity Sensor | 6 | |
| KS5549 | Kell-Strom KS5549 PRO 360 Digital Protractor (No Calibration Cert) | 19 | |
| KS5549-WC | Kell-Strom KS5549 PRO 360 Digital Protractor (with NIST Calibration Cert) | 4 | |
| KS5549WC | PR03600 DIGITAL PROTRACTOR - CALIBRATED | 4 | |
| KS6005 | PRO3600 DIGITAL PROTRACTOR WITHOUT CALIBRATION CERT | 14 | |
| KTH2232 | DIE SET WITH CALIBRATION DIMENSION | 4 | |
| L0477-R00 | TIRE CALIBRATOR ADAPTER - AIRBUS | 1 | |
| L1011-NDI-0100-57-030 | Calibration Standard, L1011 PT4 57-32-80:PG3 FIG2 | 1 | |
| L3 | TORQUE CALIBRATION ANALYZER | 2 | |
| LDI05-01 | CALIBER | 1 | |
| LS-100 | CALIBRATED LUMINANCE METER | 9 | |
| LS0007A | CALIBRATION PROGRAM | 1 | |
| LS100 | CALIBRATED LUMINANCE METER | 9 | |
| LTCT11403 | CALIBRATION OF LTCT3653 | 1 | |
| LWJWG | CALIBRATION STANDARD | 1 | |
| Linomat MCX II | Portable Documenting Calibrator | 1 | |
| M1B-KIT | BONDING METER INCL. CALIBRATION CERT | 5 | |
| M22520/1-01 | AF8 CRIMP TOOL WITH CALIBRATION CERT | 26 | |
| M22520/3-01 | GO/NO GO CALIBIRATION GAUGE | 1 | |
| M57970A0000-01 | CALIBRATE SLEEVE | 1 | |
| M58294A0000-01 | CALIBRATING SLEEVE | 1 | |
| M58295A0000-01 | CALIBRATING SLEEVE | 1 | |
| MAB Block-S | CALIBRATION BLOCKS | 1 | |
| MAP-2100-CR | MAP-2100-CR;MAP-2100 Calibration Report | 1 | |
| MAP-CAL-INPH | MAP-CAL-INPH;MAP-300 Inphi calibration test station | 1 | |
| MAP-CAL-MOLX | MAP-CAL-MOLX;MAP-300 Molex calibration test stand | 1 | |
| MAP-ITLA-MOLX | MAP-ITLA-MOLX;MAP-300 Molex ITLA calibration stand | 1 | |
| MAT/ULT/183 | CALIBRATION TEST STANDARDS (CTS) | 2 | |
| MAT/ULT/1830 | CALIBRATION STANDARD | 1 | |
| MAT/ULT/TP183 | CALIBRATION TEST STANDARD | 1 | |
| MATULT183 | MAT/ULT/TP183 - BLOCK, CALIBRATION TEST | 2 | |
| MAUKA 74386625-0 | FLUKE PRESSURE CALIBRATION | 1 | |
| MBBBT100 | ELCH ELASTICITY LAMINATE CHECKER (WITH CALIBRATION BLOCK FS1). | 3 | |
| MBBCPSECHF | CALIBRATION PLASTIC SHEET | 1 | |
| MBBGCFRPHC200 | CALIBRATION STANDARD | 1 | |
| MBBRIIL80 | CALIBRATION STANDARD FOR RUDDER INSPECTION | 1 | |
| MBEU205124 | CENTRIFUGE CALIBRATION KIT | 1 | |
| MBEU205156 | CALIBRATION KT - LOAD CELL | 1 | |
| MC-1010 | MC-1010 Multifunction Calibrator | 2 | |
| MCAL6A | CALIBRADOR DIGITAL | 4 | |
| MD80-53-303 | Calibration Block | 1 | |
| MGA-300-A-9V-R | MANOMETRO DIGITAL CALIBRACAO PNEU AERONAVE | 2 | |
| MHS-29-1A-0 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| MHS‐29‐1A‐0 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| MIT420/2 | INSULATION TESTER (WITH CALIBRATION CERT) | 3 | |
| MIT65B60127 | CALIBRE RUEDA REPLEGABLE BODEGA INFERIOR | 1 | |
| MK7ATIS-002 | INFLATOR GAUGE (CALIBRATION) | 6 | |
| MLS-800-CCIOD | MLS-800-CCIOD;Certified Calibration with Incoming and Outgoing DATA - MLS-800 | 1 | |
| MLS-801-CCIOD | MLS-801-CCIOD;Certified Calibration with Incoming and Outgoing DATA - MLS-801 | 1 | |
| MODEL 43 | METER - RF POWER, THRULINE R.F. WATTMETER. MUST REQUEST CALIBRATION CERTIFICATE TO NIST. (BIRD ELECTRONIC CORPORATION) | 12 | |
| MODEL 803 | DIGITAL AIR DATA CALIBRATOR TEST SET | 1 | |
| MODEL 9500B/3200 WITH 9560FLK | OSCILLOSCOPE CALIBRATOR | 1 | |
| MODEL105 | ACOUSTIC 1KHZ CALIBRATOR | 1 | |
| MP30 Deltascope | MP30 Deltascope - Deltascope, Ability to calibrate on a coating of unknown thickness (for magnetic induction method only), Automatic probe recognition | 1 | |
| MP90 /1-3M | CALIBRATION BLOCK | 1 | |
| MPOLP-85/85P-FRR | MPOLP-85/85P-FRR;Fixed Rate Repair and Calibration MPOLP-85 or 85P | 1 | |
| MPOLP-85/85P-TC | MPOLP-85/85P-TC;ISO TOP Calibration for MPOLP-85 or 85P | 1 | |
| MPOLS-84/84P-FRR | MPOLS-84/84P-FRR;Fixed Rate Repair and Calibration MPOLS-84 or 84P | 1 | |
| MPOLS-84/84P-TC | MPOLS-84/84P-TC;ISO TOP Calibration for MPOLS-84 or 84P | 1 | |
| MPOLS-85/85P-FRR | MPOLS-85/85P-FRR;Fixed Rate Repair and Calibration MPOLS-85 or 85P | 1 | |
| MPOLS-85/85P-TC | MPOLS-85/85P-TC;ISO TOP Calibration for MPOLS-85 or 85P | 1 | |
| MPT-VF | Calibration Verification Fixture for MPT-250C | 2 | |
| MRC005574 | INDICATOR/REGISTER - MOISTURE, RADOME (MODEL A8AF) (115 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATI (AQUA MEASURE INSTRUMENT COMPANY) | 4 | |
| MRC006507 | INDICATOR/REGISTER-MOISTURE, RADOME (MODEL A8AF) (230 V) (CONSISTS OF ELECTRODE GUN, METER, BATTERY, CHARGER/CALIBRATION (AQUA MEASURE INSTRUMENT COMPANY) | 5 | |
| MS20426D5-6 | CALIBRATION STANDARD RIVET | 1 | |
| MSTC-1000/2000 | OCTAGON MEASURING SCALE & TAPE CALIBRATION SYSTEM MODEL MSTC-1000/2000 | 1 | |
| MTS/TB-81BBS-CCWA | MTS/TB-81BBS-CCWA;Service Certified Calibration W Adjustments for MTS/TB 81BBSX Module | 1 | |
| MTS/TB-8K-40G/100G-CCWA | MTS/TB-8K-40G/100G-CCWA;Service Certified Calibration for Ch040103/40G/100G | 1 | |
| MTS/TB-MSAMMODS-CCWA | MTS/TB-MSAMMODS-CCWA;Certified Calibration MTS/TB-6000/8000 MSAM Module all versions | 1 | |
| MTS/TB4-COSA-FRR | MTS/TB4-COSA-FRR;Fixed Rate Repair and Calibration MTS/TB-4000 COSA Module | 1 | |
| MTS/TB4-CUVDSL-CCWA | MTS/TB4-CUVDSL-CCWA;Service Certified Calibration W Adjustments for MTS/TB4000 Cu/VDSL/CuVDSL Modules | 1 | |
| MTS/TB4000-FRR | MTS/TB4000-FRR;Fixed Rate Repair and Calibration MTS/TB-4000 Mainframe | 1 | |
| MTS/TB4OLP-CCWA | MTS/TB4OLP-CCWA;Service Certified Calibration W Adjustments for MTS/TB4000 OLP-4057 FTTX Module | 1 | |
| MTS/TB4OLP-FRR | MTS/TB4OLP-FRR;Fixed Rate Repair and Calibration MTS/TB-4000 OLP-4057 FTTX Module | 1 | |
| MTS/TB5801X-FRR | MTS/TB5801X-FRR;Fixed Rate Repair and Calibration for MTS/TB-58x1x | 1 | |
| MTS/TB58X2X-FRR | MTS/TB58X2X-FRR;Fixed Rate Repair and Calibration for MTS/TB-58x2x | 1 | |
| MTS/TB58XX-100G-FRR | MTS/TB58XX-100G-FRR;Fixed Rate Repair and Calibration for MTS/TB-58xx-100G | 1 | |
| MTS/TB6000/A-CCWA | MTS/TB6000/A-CCWA;Service Certified Calibration with Adjustments for MTS/TB6000 or MTS/TB6000A Mainframe | 1 | |
| MTS/TB6000/A-FRR | MTS/TB6000/A-FRR;Fixed Rate Repair and Calibration MTS/TB-6000 Mainframe | 1 | |
| MTS/TB8000-CCWA | MTS/TB8000-CCWA;Service Certified Calibration W Adjustments for MTS/TB8000 Mainframe | 1 | |
| MTS/TB8000-FRR | MTS/TB8000-FRR;Fixed Rate Repair and Calibration MTS/TB-8000 Mainframe | 1 | |
| MTS/TBXMODH-CCWA | MTS/TBXMODH-CCWA;Service Certified Calibration W/ Adjustments for TB OTDR Mod - VLR/UHD/SR/Dr/HD/VHD/OFI/CWDM | 1 | |
| MTS/TBXMODH-FRR | MTS/TBXMODH-FRR;Fixed Rate Repair and Calibration OTDR Mod VLR/UHD/SR/DR/HD/VHD/OFI/CWDM/D | 1 | |
| MTS/TBXMODL-CCWA | MTS/TBXMODL-CCWA;Service Certified Calibration W/ Adjustments for TB OTDR Mod - SRE/VSR/VSRE/23SRl/mm/6000L/LM/Ma/5066X/MTAU | 1 | |
| MTS/TBXMODL-FRR | MTS/TBXMODL-FRR;Fixed Rate Repair Calibration OTDR Mod SRE/VSR/VSRE/23SRL/MM/6000L/LM//MTAU | 1 | |
| MTS/TBXMODM-CCWA | MTS/TBXMODM-CCWA;Service Calibration for TB OTDR Mod - MR/LR/RLR/46SRl/56SRl/RMP/Quad/B/C | 1 | |
| MTS/TBXMODM-FRR | MTS/TBXMODM-FRR;Fixed Rate Repair and Calibration OTDR Mod MR/LR/RLR/46SRL/56SRL/RMP/QUAD/B/C | 1 | |
| MUTL-C1HROSAWL-M100-MFA | MUTL-C1HROSAWL-M100-MFA;MAP-Series UTL HROSA Field Calibration cassette SMF FC/APC | 1 | |
| MVIQAP4020 | 04MM BORESCOPE PROBE - (CALIBRATION) MENTOR IQ HD | 1 | |
| MX6KIT-K103R211 | GAS DETECTOR KIT WITH PID (INCLUDES CALIBRATION EQUIPMENT) | 1 | |
| NAV-750-CCIOD | NAV-750-CCIOD;Certified Calibration with Incoming and Outgoing DATA - NAV-750 | 1 | |
| NB-45 | Nitrogen Booster WITHOUT Calibrated Gauges | 2 | |
| NB-45-CAL | NITROGEN BOOSTER WITH CALIBRATED GAUGES | 1 | |
| NB-45-Cal | Nitrogen Booster with Calibrated Gauges and Certificate | 1 | |
| NB70071 | NITROGEN BOOSTER WITHOUT CALIBRATED GAUGES | 1 | |
| NDE FLAW TECH-STEP WEDGE-1544 | STEP WEDGE CALIBRATION BLOCK ALUMINUM | 1 | |
| NDT 1022 | Calibration Block | 3 | |
| NDT 1023 | Calibration Block | 2 | |
| NDT 1024 | Calibration Block | 2 | |
| NDT 1025 | Calibration Block | 2 | |
| NDT 1026 | Calibration Block | 2 | |
| NDT 1027 | Calibration Block | 2 | |
| NDT 1087-1..4 | Calibration Block | 3 | |
| NDT 1087-14 | CALIBRATION BLOCK | 3 | |
| NDT 1088 | Calibration Block | 1 | |
| NDT 1094-XXX-A | Calibration Block | 1 | |
| NDT 1095 | Calibration Block | 2 | |
| NDT 1099 | Calibration Block | 4 | |
| NDT 3038 | Calibration Block | 4 | |
| NDT 3092 | Calibration Block | 2 | |
| NDT 369 | CALIBRATION BLOCK | 2 | |
| NDT 512 | Calibration Block | 1 | |
| NDT 514 | Calibration Block | 1 | |
| NDT 515 | Calibration Block | 2 | |
| NDT 516 | Calibration Block | 1 | |
| NDT 519 | Calibration Block | 1 | |
| NDT 527 | Calibration Block | 1 | |
| NDT 537 | Calibration Block | 2 | |
| NDT 546 | Calibration Block | 1 | |
| NDT 7005 | ULTRASONIC CALIBRATION STANDARD) | 2 | |
| NDT 7014 | EDDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT 7015 C | CALIBRATION REFERENCE STANDARD | 1 | |
| NDT 7015B | ULTRASONIC CALIBRATION REFERENCE STANDARD | 1 | |
| NDT 7078 | ULTRASONIC CALIBRATION REFERENCE STANDARD | 1 | |
| NDT 745 | EDDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT 786-A | CALIBRATION REFERENCE STANDARD | 2 | |
| NDT 786A | EDDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT-3014TI | TI CALIBRATION BLOCK 8 STEPS(1-8MM) | 1 | |
| NDT-396 | CALIBRATION BLOCK | 6 | |
| NDT1016 | Calibration Block | 3 | |
| NDT1017 | Calibration Block | 2 | |
| NDT1018 | Calibration Block | 3 | |
| NDT1019 | Calibration Block | 3 | |
| NDT1020 | Calibration Block | 2 | |
| NDT1021 | Calibration Block | 2 | |
| NDT1022 | CALIBRATION BLOCK | 3 | |
| NDT1038 | CALIBRATION GUIDE | 3 | |
| NDT1039-T1 | CALIBRATION GUIDE | 1 | |
| NDT1039-T2 | CALIBRATION GUIDE | 1 | |
| NDT1039-t1 | Calibration Block | 1 | |
| NDT1039-t2 | Calibration Block | 1 | |
| NDT1048 | CALIBRATION BLOCK | 4 | |
| NDT1084 | Calibration Block | 1 | |
| NDT1084-1 | Calibration Block | 1 | |
| NDT1084-2 | Calibration Block | 1 | |
| NDT1084-3 | Calibration Block | 1 | |
| NDT1085-032 | CALIBER BLOCK | 3 | |
| NDT1085-063 | CALIBER BLOCK | 2 | |
| NDT1085-071 | CALIBER BLOCK | 2 | |
| NDT1085-112 | CALIBER BLOCK | 2 | |
| NDT1085-125 | CALIBER BLOCK | 2 | |
| NDT1086-050 | Calibration Block | 3 | |
| NDT1087-1 | CALIBRATION BLOCK | 4 | |
| NDT1087-2 | CALIBRATION BLOCK | 3 | |
| NDT1087-3 | CALIBRATION BLOCK | 3 | |
| NDT1087-4 | CALIBRATION BLOCK | 3 | |
| NDT1087-8 | LFEC EDDY CURRENT CALIBRATION BLOCK | 2 | |
| NDT1096-050 | Calibration Block | 1 | |
| NDT1096-070 | Calibration Block | 1 | |
| NDT1099 | NDT CALIBRATION STANDARD | 4 | |
| NDT1106 | CALIBRATION BLOCK | 2 | |
| NDT187 | Calibration Standard, CASA CN-25130040E001, 51-30-04 PT 1, PG 11 | 1 | |
| NDT188 | Calibration Standard, CASA CN-25130040F001, 51-30-04, PT 1, PG 12 | 1 | |
| NDT190 | Calibration Standard, CASA CN-25130050E001, 51-30-05, PT 1 PG 11 | 1 | |
| NDT191 | Calibration Standard, CASA CN-25130050F001, 51-30-05, PT 1 PG 12 | 1 | |
| NDT194B | CALIBRATION BLOCK | 2 | |
| NDT201 | Calibration Standard, CASA 55-15-00, CASA CN-25515000B001, PT 6, PG 4 | 1 | |
| NDT202 | Calibration Standard, CASA CN-25233150B001 | 1 | |
| NDT203 | Calibration Standard, CASA CN- 25515200B000 | 1 | |
| NDT204 | Calibration Standard, CASA CN-25337450B000, 53-37-45, PT 3, PG 5 | 1 | |
| NDT205 | Calibration Standard, CASA CN-25327150B001, 53-27-15, PT 3, PG 4 | 1 | |
| NDT207 | Calibration Standard, CASA CN-25753100B000, 57-53-10, PT 4, PG 5 | 1 | |
| NDT209 | Calibration Standard, CASA CN-25535000B001, 55-35-00, PT 6, PG 4 | 1 | |
| NDT210 | Calibration Standard, CASA CN-25515100B000 | 1 | |
| NDT211 | Calibration Standard, CASA CN-25327110B000, 53-27-11 PT 3, PG 4 | 1 | |
| NDT214 | Calibration Standard, CASA CN-25711040B000, 57-11-01, PT 4, PG 4 | 1 | |
| NDT215 | Calibration Standard, CASA CN-25315000B000, 53-15-00, PT 2, PG 4 | 1 | |
| NDT216 | Calibration Standard, CASA CN-25316000B000, 53-16-00 PT 2, PG 4 | 1 | |
| NDT217 | Calibration Standard, CASA CN-25337000B000, 53-37-00, PT 3, PG 4 | 1 | |
| NDT218 | Calibration Standard, CASA 57-24-00, PT 4, PG 4 | 1 | |
| NDT219 | Calibration Standard, CASA CN-235 PT4 57-11-06:PG4 FG2 | 1 | |
| NDT220 | Calibration Standard, CASA CN-27121120B000 | 1 | |
| NDT221 | Calibration Standard, CASA CN-27120000BA00 | 1 | |
| NDT3001 | Calibration Block | 2 | |
| NDT3004 | BLOCK CALIBRATION | 3 | |
| NDT3012 | Calibration Block | 1 | |
| NDT3021 | Calibration Block | 6 | |
| NDT3023 | Calibration Block | 4 | |
| NDT3024A | Calibration Block | 2 | |
| NDT3038-P1 | Calibration Block | 3 | |
| NDT3049 | Calibration Block | 2 | |
| NDT3050 | Calibration Block | 4 | |
| NDT3055B | CALIBRATION BLOCK | 2 | |
| NDT3065-STL | Calibration Block | 2 | |
| NDT3068 | Calibration Block | 5 | |
| NDT3118 | Calibration Block | 3 | |
| NDT3141 | CALIBRATION BLOCK | 2 | |
| NDT3141G1 | CALIBRATION BLOCK | 2 | |
| NDT3152-A | Calibration Block | 3 | |
| NDT3166-006 | CALIBRATION BLOCK | 4 | |
| NDT3170 | Calibration Block | 5 | |
| NDT3171 | Calibration Block | 5 | |
| NDT3239G | BOEING CALIBRATION GUIDE 737 Part 4 55-30-03 Page 8 Figure 3. Material: Delrin. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3249 | CALIBRATION BLOCK | 1 | |
| NDT3250 | CALIBRATION BLOCK | 1 | |
| NDT3276 | CALIBRATION STANDARD | 2 | |
| NDT3301A | CALIBRATION BLOCK | 1 | |
| NDT3302 | CALIBRATION BLOCK | 1 | |
| NDT3312 | CALIBRATION BLOCK | 2 | |
| NDT369 | Calibration Block | 2 | |
| NDT392 | Calibration Block | 1 | |
| NDT396 | Calibration Block | 6 | |
| NDT4126A | CALIBRATION BLOCK | 1 | |
| NDT5097-A | CALIBRATION BLOCK | 2 | |
| NDT5097-D | CALIBRATION BLOCK | 1 | |
| NDT514 | Calibration Block | 1 | |
| NDT528 | Calibration Block | 1 | |
| NDT531 | Calibration Block | 1 | |
| NDT542 | Calibration Block | 1 | |
| NDT555 | Calibration Block | 1 | |
| NDT562 | Calibration Block | 1 | |
| NDT575 | Calibration Block | 1 | |
| NDT578 | Calibration Block | 1 | |
| NDT602 | Calibration Reference Standard | 1 | |
| NDT602-.050 | Calibration Standard, 0.050INCH | 1 | |
| NDT602-.074 | Calibration Standard, .074INCH | 1 | |
| NDT602-.100 | Calibration Standard, 0.100 | 1 | |
| NDT602-.125 | Calibration Standard, 0.125 | 1 | |
| NDT602-.130 | Calibration Standard, 0.130 | 1 | |
| NDT602-.150 | Calibration Standard, 0.150INCH | 1 | |
| NDT602-.180 | Calibration Standard, 0.180INCH | 1 | |
| NDT602-.225 | Calibration Standard, 0.225INCH | 1 | |
| NDT6036CG1 | Calibration Guide | 1 | |
| NDT6036CG2 | Calibration Guide | 1 | |
| NDT7005 | CALIBRATION BLOCK | 2 | |
| NDT7014 | EDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT7015 C | CALIBRATION REFERENCE STANDARD | 1 | |
| NDT7020 | CALIBRATION BLOCK | 1 | |
| NDT7031A | CALIBRATION BLOCK | 2 | |
| NDT7031B | CALIBRATION BLOCK | 2 | |
| NDT745 | EDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT753 | CALIBRATION BLOCK P/N: NDT753 | 2 | |
| NDT757A | CALIBRATION BLOCK | 1 | |
| NDT786-A | CALIBRATION REFERENCE STANDARD | 2 | |
| NDT786A | EDYCURRENT CALIBRATION STANDARD | 2 | |
| NDT811 | BOEING CALIBRATION STANDARD FIGURE 3 DETAIL II. MATERIAL: 2024-T351 ALUMINUM or 7075-T651 ALUMINUM. | 1 | |
| NDT_MAT/ULT/183 | CALIBRATION TEST STANDARD | 1 | |
| NEC-6383 | CALIBRATOR, STANDING | 1 | |
| NEC8139 | CALIBRATION BLOCK | 1 | |
| NGC-4500-FA-CC | NGC-4500-FA-CC;Service NGC-4500-FA Calibration | 1 | |
| NGC-4500-MM-CCWA | NGC-4500-MM-CCWA;Service Certified Calibration W Adjustments for Certifier 40G Multimode | 1 | |
| NGC-4500-MMSM-CCWA | NGC-4500-MMSM-CCWA;Service Certified Calibration W Adjustments for Certifier 40G Multimode and Single-Mode | 1 | |
| NGC-CAL-ASP-LICENSE | NGC-CAL-ASP-LICENSE;Certifier Calibration License for Authorized Partner Program;1 license | 1 | |
| NGC-CAL-KIT-ASP | NGC-CAL-KIT-ASP;Certifier Calibration Kit for Authorized Partners includes 5 licenses | 1 | |
| NRK3AL | CALIBRATION STAND WITH HOLES | 2 | |
| NSC-100-CV | NSC-100-CV;Certified Calibration Verification for NSC-100 | 1 | |
| NSHD-M1 | NIST CALIBRATION FEE | 1 | |
| NTG2604-D | NEWBOW TYRE PRESSURE GAUGE – CALIBRATED | 6 | |
| NTG2604-S | AIRCRAFT TYRE PRESSURE CHECKING GAUGE, 0-260 PSI, CALIBRATED, WITH SMALL-BORE 8V VALVE ADAPTER | 5 | |
| OB-30 | Oxygen Booster WITHOUT Calibrated Gauges and Certificate | 4 | |
| OB-30-CAL | Oxygen Booster with Calibrated Gauges and Certificate | 2 | |
| OBS-55-FRRC | OBS-55-FRRC;Fixed Rate Repair and Calibration OBS-55 | 1 | |
| OBS-550-FRRC | OBS-550-FRRC;Fixed Rate Repair and Calibration OBS-550 | 1 | |
| OCC-56-FRRC | OCC-56-FRRC;Fixed Rate Repair and Calibration OCC-55/-56 | 1 | |
| OHH-FC-TRN | OHH-FC-TRN;Calibration Training for Optical HH Pwr Meter and Source Field Calibration | 1 | |
| OLP-37-FRR | OLP-37-FRR;Fixed Rate Repair and Calibration OLP-37 | 1 | |
| OLP-39-FRR | OLP-39-FRR;Fixed Rate Repair and Calibration for OLP-39 | 1 | |
| OLP-39-TC | OLP-39-TC;ISO TOP Calibration for OLP-39 | 1 | |
| OLP-3X-FRR | OLP-3X-FRR;Fixed Rate Repair and Calibration OLP-34/-35/-38 | 1 | |
| OLP-82P-FRR | OLP-82P-FRR;Fixed Rate Repair and Calibration for OLP-82P | 1 | |
| OLP-85-FRR | OLP-85-FRR;Fixed Rate Repair and Calibration OLP-85 | 1 | |
| OLP-85P-FRC | OLP-85P-FRC;Fixed Rate Repair and Calibration OLP-85P | 1 | |
| OLP-87-FRC | OLP-87-FRC;Fixed Rate Repair and Calibration OLP-87 | 1 | |
| OLP-87P-FRC | OLP-87P-FRC;Fixed Rate Repair and Calibration OLP-87P | 1 | |
| OLP-88-FRC | OLP-88-FRC;Fixed Rate Repair and Calibration OLP-88 | 1 | |
| OLP-88P-FRC | OLP-88P-FRC;Fixed Rate Repair and Calibration OLP-88P | 1 | |
| OLS-34-FRR | OLS-34-FRR;Fixed Rate Repair and Calibration OLS-34 | 1 | |
| OLS-35-FC/PC-SC/PC-FRR | OLS-35-FC/PC-SC/PC-FRR;Fixed Rate Repair and Calibration OLS-35 FC/PC or SC/PC | 1 | |
| OLS-35-FRR | OLS-35-FRR;Fixed Rate Repair and Calibration OLS-35 LC/PC | 1 | |
| OLS-36-FRR | OLS-36-FRR;Fixed Rate Repair and Calibration OLS-36 | 1 | |
| OLS-85-FRR | OLS-85-FRR;Fixed Rate Repair and Calibrationl OLS-85 | 1 | |
| OLT-85-FRR | OLT-85-FRR;Fixed Rate Repair and Calibration OLT-85 | 1 | |
| OLTS-85-FRC | OLTS-85-FRC;Fixed Rate Repair and Calibration OLTS-85 | 1 | |
| OLTS-85P-FRC | OLTS-85P-FRC;Fixed Rate Repair and Calibration OLTS-85P | 1 | |
| OLX-35-FC | OLX-35-FC;Service Field Calibration for OLX-35 Optical Handheld units | 1 | |
| OMEGA CL23 | CALIBRATOR/THERMOMETER | 1 | |
| ONA-1000A-MF-CR | ONA-1000A-MF-CR;ONA-1000A Calibration Report | 1 | |
| ONA-RA-CR | ONA-RA-CR;RA Module Calibration Report | 1 | |
| ONA-RA-CRISO | ONA-RA-CRISO;RA 18/32/44 GHz Module Calibration Report per ISO 17025 | 1 | |
| ONA-RA09-CRISO | ONA-RA09-CRISO;RA 9 GHz Module Calibration Report per ISO 17025 | 1 | |
| ONA-SP-CR | ONA-SP-CR;SPA Module Calibration Report | 1 | |
| ONA-SP06-CRISO | ONA-SP06-CRISO;SPA 6 GHz Module Calibration Report per ISO 17025 | 1 | |
| ONX-220-CAL | ONX-220-CAL;Certified Calibration ONX-220 | 1 | |
| ONX-220-FRC | ONX-220-FRC;Fixed Rate Repair and Calibration ONX-220 | 1 | |
| ONX-580-CAL | ONX-580-CAL;Service Certified Calibration ONX-580 Test Module and Mainframe | 1 | |
| ONX-580-CAL-DATA | ONX-580-CAL-DATA;Detailed Data Report for ONX-580 Calibration - TOPCal or FRR Required | 1 | |
| ONX-580-FACTORY-CR-DATA | ONX-580-FACTORY-CR-DATA;ONX580/580P detailed factory calibration report with data | 1 | |
| ONX-580-FRR | ONX-580-FRR;Fixed Rate Repair and Calibration ONX-580 Test Module and Mainframe | 1 | |
| ONX-580-MF-CAL | ONX-580-MF-CAL;Service Certified Calibration ONX-580 Mainframe | 1 | |
| ONX-580-MF-FRR | ONX-580-MF-FRR;Fixed Rate Repair and Calibration ONX-580 Mainframe | 1 | |
| ONX-580-TESTMOD-CAL | ONX-580-TESTMOD-CAL;Service Certified Calibration ONX-580 Test Module | 1 | |
| ONX-6XX-CAL | ONX-6XX-CAL;Service Certified Calibration ONX-6xx D3 Modem and Mainframe | 1 | |
| ONX-6XX-D3-CAL | ONX-6XX-D3-CAL;Service Certified Calibration ONX-6xx D3 Modem Module | 1 | |
| ONX-6XX-D3-FRR | ONX-6XX-D3-FRR;Fixed Rate Repair and Calibration ONX-6xx D3 Modem Module | 1 | |
| ONX-6XX-FRR | ONX-6XX-FRR;Fixed Rate Repair and Calibration ONX-6xx D3 Modem and Mainframe | 1 | |
| ONX-ON-CAL | ONX-ON-CAL;ONX Onsite Calibration Service | 1 | |
| ONX-ON-CHTR-CAL | ONX-ON-CHTR-CAL;ONX Onsite Calibration Service includes refresh and EW | 1 | |
| ONX-ON-CHTR-VER | ONX-ON-CHTR-VER;ONX Onsite Calibration Verification Service plus 1YR EW | 1 | |
| OP-924B-3000 | 3,000 LBS SCALE/CALIBRATED | 1 | |
| ORL-85-FRR | ORL-85-FRR;Fixed Rate Repair and Calibration ORL-85 | 1 | |
| OSA-110-FRR | OSA-110-FRR;Fixed Rate Repair and Calibration MTS-6000/-8000 OSA-110 | 1 | |
| OSA-15X/16X/18X-FRR | OSA-15X/16X/18X-FRR;Fixed Rate Repair and Calibration OSA-150-160/-161/-180/-181 | 1 | |
| OSA-5XX-FRR | OSA-5XX-FRR;Fixed Rate Repair and Calibration OSA-500/-500R/-500RS/-500M | 1 | |
| OSAXXX-CCWA | OSAXXX-CCWA;Service Certified Calibration W Adjustments for OSAXXX Modules Only | 1 | |
| OSLN50-1 | CALIBRATION KIT | 1 | |
| OSLN50A-8 | COAXIAL CALIBRATION KIT | 1 | |
| OSLNF50A-8 | COAXIAL CALIBRATION KIT | 1 | |
| OTDR-ATE-PS | OTDR-ATE-PS;OTDR Calibration System Service and Maintenance Fee | 1 | |
| OTDR-FC-TRN | OTDR-FC-TRN;Calibration Training for OTDR Field Calibration | 1 | |
| P039977 | TOOL TO CALIBRATE B787 BATTERY CHARGER | 1 | |
| P200 | PRESSURE CALIBRATOR (P200 PRO PLUS-2-0700G-C-HF-E_) | 1 | |
| P2K-ABF-01 | DATA LOADER, SET (CALIBRATION) | 2 | |
| P40221 | BOX CALIBRATION CONTROL TOOL | 2 | |
| P54-07-1 | SPLIT CALIBRATION BLOCK | 1 | |
| P603F/D | BATTERY TEMP. INDICATOR CALIBRATOR | 1 | |
| P603F/D(230VAC50HZ) | BATTERY TEMP. INDICATOR CALIBRATOR | 1 | |
| P7-01-0024 | TEST TEST UNIT-TU-14 (CALIBRATION) | 9 | |
| PASSCALDMM | STANDARD CALIBRATION CERTIFICATE NEW MULTIMETER | 1 | |
| PASSCALTHERM | STANDARD CALIBRATION CERTIFICATE | 1 | |
| PDL 1030 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 1030J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG17 PG24 | 2 | |
| PDL 1034 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard | 1 | |
| PDL 1034/1040 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard + Guide | 1 | |
| PDL 1034J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26, engrave per drawing Standard | 1 | |
| PDL 1034J/1040J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG18 PG26 & PG27, engrave per drawing, Standard + Guide | 2 | |
| PDL 1037A | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG20 PG30 | 2 | |
| PDL 1037A/B | Calibration Standard, TO 1C-130J-36 20-40-00 PG31:FIG20, 2 Saw cuts | 1 | |
| PDL 1037AJ | Calibration Standard, TO 1C-130J-36 20-40-00 PG30:FIG20 | 1 | |
| PDL 1037B | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG21 PG31 | 2 | |
| PDL 1037BJ | Calibration Standard, TO 1C-130J-36 20-40-00 PG31:FIG21 | 1 | |
| PDL 1040 | Calibration Standard, C130 20-40-00 Fig 18 GP26 Probe Guide | 1 | |
| PDL 1040J | Calibration Standard, C130 20-40-00 Fig 18 GP26 Probe Guide | 1 | |
| PDL 1081 | Calibration Standard, Foward Fuselage Skin/Doulber, Fg 6-22 Pg 6-97 | 1 | |
| PDL 1155 | Calibration Standard, Calibration Standard, C130 SMP 515-C-NDI 20-40-00 | 2 | |
| PDL 1199 | Calibration Standard, L1011 PT4 093-32-238:PG17 FIG2 | 1 | |
| PDL 1214 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 1214J | Calibration Standard, C13J SMP 515-C-NDI 20-40-00:FIG22 PG32 | 2 | |
| PDL 1215 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 1215J | Calibration Standard, C130J SMP 515-C-NDI 20-40-00:FIG23 PG33 | 2 | |
| PDL 1217A | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 1217AJ | Calibration Standard, C130J SMP 515-C-NDI 20-40-00:FIG24 PG34 | 1 | |
| PDL 1217BJ | Calibration Standard, C130J SMP 515-C-NDI 20-40-00:FIG25 PG35 | 1 | |
| PDL 1217CJ | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG25 PG35 | 1 | |
| PDL 1252 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 | 1 | |
| PDL 1253 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 | 1 | |
| PDL 1254J | Calibration Standard Figure 27 20-40-00 PG1 | 2 | |
| PDL 1257 | C130J Calibration Standard 20-40-00 Pg 1-2 Fg 22 | 1 | |
| PDL 1258 | C130J Calibration Standard 20-40-00 Pg 1 Fg 23 | 1 | |
| PDL 1259 | C130J Calibration Standard 20-40-00 Pg 1-2 Fg 24 | 1 | |
| PDL 389 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 389J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG1 PG3 | 2 | |
| PDL 419 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 419J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG2 PG4 | 1 | |
| PDL 422 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 422J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG3 PG5 | 1 | |
| PDL 447 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG4 PG6 | 1 | |
| PDL 447J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG4 PG6 | 2 | |
| PDL 449 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 449J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG5 PG7 | 1 | |
| PDL 457A | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 457AJ | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 2 | |
| PDL 457S | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 1 | |
| PDL 457SJ | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 2 | |
| PDL 457SS | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG6 PG8 | 2 | |
| PDL 459 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 459J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG7 PG10 | 1 | |
| PDL 522J | Calibration Standard, C130 SMP, 522 | 1 | |
| PDL 601 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 601-101 thru 109 | 1 | |
| PDL 601J | CALIBRATION STANDARD FIGURE 20-29 | 1 | |
| PDL 624 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00 Probe Guide Set PDL 624-101 thru 109 | 1 | |
| PDL 843 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 843J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG9 PG12 | 2 | |
| PDL 874 | CALIBRATION STANDARD 20-40-00 FIG 10 | 1 | |
| PDL 917 | Calibration Standard, C130 SMP 515-C-NDI FIG2 | 2 | |
| PDL 919 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 2 | |
| PDL 919J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG11 PG14 | 1 | |
| PDL 920 | CALIBRATION STANDARD FIGURE 12 FASTENER (HLT114-6-8, HLPB8-8, HL18PB10-8, HL 206-4) | 2 | |
| PDL 920J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG12 PG16 | 1 | |
| PDL 941 | CALE DE CALIBRATION MATERIAU 7075 | 1 | |
| PDL 941J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG13 PG19 | 1 | |
| PDL 943 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PDL 943J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG14 PG20 | 2 | |
| PDL 944-2 | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG15 PG21 | 1 | |
| PDL 944-2J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG15 PG21 | 2 | |
| PDL 944-J | CALIBRATION STANDARD FIGURE 15 FASTENER (HL40-6-5 + HL70-6, NAS6208-11 + KFN5428), 7075-T6 ALUMINUM | 1 | |
| PDL 958 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 23 FIGURE 16 2024-T3 ALUMINUM | 1 | |
| PDL 958J | Calibration Standard, C130 SMP 515-C-NDI 20-40-00:FIG16 PG23 | 1 | |
| PDL 980 | C-130 Lower Engine Mount Longeron-Fwd End Calibration Standard. 7075-T6 Aluminum... | 1 | |
| PDL-1030 | CALIBRATTION MATERIAU | 1 | |
| PDL-1155 | CALIBRATTION MATERIAU | 2 | |
| PDL-1214J | CALIBRATTION MATERIAU | 2 | |
| PDL-419 | CALIBRATTION MATERIAU | 1 | |
| PDL-457A | CALIBRATTION MATERIAU | 1 | |
| PDL-457S | CALIBRATTION MATERIAU | 1 | |
| PDL-459 | CALIBRATTION MATERIAU | 1 | |
| PDL-843 | CALIBRATTION MATERIAU | 1 | |
| PDL-917 | CALIBRATTION MATERIAU | 2 | |
| PDL-919 | CALIBRATTION MATERIAU | 2 | |
| PDL-920 | CALIBRATTION MATERIAU | 2 | |
| PDL-944-2 | CALIBRATTION MATERIAU | 1 | |
| PDL-980 | CALIBRATTION MATERIAU | 1 | |
| PDL-OWS7290 | Rear Beam Pylon Attach Fitting Calibration Standard | 1 | |
| PDL1034 | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00: | 1 | |
| PDL1252 | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00 | 1 | |
| PDL389 | CALIBRATION STANDARD ALUMINUM | 1 | |
| PDL419 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL422 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL447 | CALIBRATION STANDARD, C130 SMP 515-C-NDI 20-40-00:FIG4 PG6 | 1 | |
| PDL457A | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL457AJ | CALIBRATION STANDARD | 2 | |
| PDL459 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL525 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL621 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL843 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL843J | CALIBRATION STANDARD | 2 | |
| PDL920 | CALIBRATION STANDARD FIGURE 12 FASTENER HLT114-6- | 2 | |
| PDL943 | CALE DE CALIBRATION MATERIAU 7075-T6 | 1 | |
| PG-UL60.040000 | CALIBRATION DEVICE FOR UL60 | 1 | |
| PJ6301 | HIGH ACCURACY TESTER BTMU THERMOMETER CALIBRATOR | 1 | |
| PNPGT68 | ANGLE BEAM CALIBRATION BLOCK | 1 | |
| PP0401-2 | CALIBRATION CERTIFICATE FOR ADT681-RD-GP300-PSI-N | 1 | |
| PP0402-9 | CALIBRATION W/ UNCERTAINTIES-ADDITEL ADT681 | 1 | |
| PP0501-9 | CALIBRATION W/ UNCERTAINTIES-ADDITEL ADT681-RD-GP3K-PSI-N | 1 | |
| PPS1-CCIOD | PPS1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PPS1 | 1 | |
| PRE65B00726 | PLUG SIDE CALIBRATOR DUCT | 1 | |
| PRED1F5NC | TORQ W/CALIB CERT | 1 | |
| PRED1F5NLC | TORQ LSIGNAL W/CALIB CERT | 1 | |
| PRED1F5NMC | TORQ W/CALIB CERT | 1 | |
| PRED4F500NC | TORQ W/CALIB CERT | 1 | |
| PRED4F500NMC | TORQ W/CALIB CERT | 1 | |
| PREDS1F15CHMMC | TORQUE W CALIBRATION CERT | 1 | |
| PRESSUREGAUGE | DIGITAL TIRE PRESSURE GAUGE, WITH UPDATE CALIBRATION CHECK, < 250 PSI | 2 | |
| PS453.010.A | PITOT STATIC CALIBRATOR | 1 | |
| PSD-XX-SILVER-3 | PSD-XX-SILVER-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| PSD-XX-SILVER-5 | PSD-XX-SILVER-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| PSD120-2-CCIOD | PSD120-2-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD120-2 | 1 | |
| PSD222-1 | INTERFACE /CALIBRATION TEST SET | 1 | |
| PSD222-10-CCIOD | PSD222-10-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD222-1 | 1 | |
| PSD30-1-1-CCIOD | PSD30-1-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD30-1-1 | 1 | |
| PSD30-1-2-CCIOD | PSD30-1-2-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD30-1-2 | 1 | |
| PSD30-1-3-CCIOD | PSD30-1-3-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD30-1-3 | 1 | |
| PSD30-1-4-CCIOD | PSD30-1-4-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD30-1-4 | 1 | |
| PSD30-1-CCIOD | PSD30-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD30-1 | 1 | |
| PSD30-2-1-CCIOD | PSD30-2-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD30-2-1 | 1 | |
| PSD30-2-CCIOD | PSD30-2-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD30-2 | 1 | |
| PSD30-2AF | TEST SET, FUEL QUANTITY CALIBRATION | 5 | |
| PSD30-2AF-CCIOD | PSD30-2AF-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD30-2AF | 1 | |
| PSD30-2FG-CCIOD | PSD30-2FG-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD30-2F G | 1 | |
| PSD340-1-CCIOD | PSD340-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD340-1 | 1 | |
| PSD40-1-CCIOD | PSD40-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD40-1 | 1 | |
| PSD401 | FUEL TEST UNIT (SERVICEABLE - 1 WK LEADTIME CALIBRATION) | 9 | |
| PSD412-1-CCIOD | PSD412-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD412-1 | 1 | |
| PSD50-2-CCIOD | PSD50-2-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD50-2 | 1 | |
| PSD60 2R | AC CAPACITANCE FUEL QUANTITY TEST (CALIBRATION) | 27 | |
| PSD60-1-CCIOD | PSD60-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD60-1 | 1 | |
| PSD60-1AF | TEST SET, FUEL QUANTITY CALIBRATION | 5 | |
| PSD60-1AF-CCIOD | PSD60-1AF-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD60-1AF | 1 | |
| PSD60-2-CCIOD | PSD60-2-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD60-2 | 1 | |
| PSD60-2R | CALIBRATION UNIT | 27 | |
| PSD60-2R-CCIOD | PSD60-2R-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD60-2R | 1 | |
| PSD600-1-CCIOD | PSD600-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD600-1 | 1 | |
| PSD602 | CALIBRATION UNIT | 5 | |
| PSD737-2-CCIOD | PSD737-2-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD737-2 | 1 | |
| PSD747-2X-CCIOD | PSD747-2X-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD747-2X | 1 | |
| PSD757/767-1-CCIOD | PSD757/767-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD757/767-1 | 1 | |
| PSD90 1C | TEST SET, FUEL QUANTITY CALIBRATION | 3 | |
| PSD90-1C | TEST SET, FUEL QUANTITY CALIBRATION | 3 | |
| PSD90-1C/M-CCIOD | PSD90-1C/M-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD90-1C/M | 1 | |
| PSD90-F15-CCIOD | PSD90-F15-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD90-F15 | 1 | |
| PSD90A310-2-CCIOD | PSD90A310-2-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDA310-2 | 1 | |
| PSD90A320-2-CCIOD | PSD90A320-2-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDA320-2 | 1 | |
| PSD90S-F16-CCIOD | PSD90S-F16-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSD90S-F16 | 1 | |
| PSDA340-1-CCIOD | PSDA340-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDA340-1 | 1 | |
| PSDAF-118-CCIOD | PSDAF-118-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDAF-118 | 1 | |
| PSDAF-C | HARNESS SET, C-130/382 FUEL QUANTITY CALIBRATION | 1 | |
| PSDAF-CN235AC-CCIOD | PSDAF-CN235AC-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDAF-CN235AC | 1 | |
| PSDAF-CN235DC-CCIOD | PSDAF-CN235DC-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDAF-CN235DC | 1 | |
| PSDAF-F15-CCIOD | PSDAF-F15-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDAF-F15 | 1 | |
| PSDAF-F16-CCIOD | PSDAF-F16-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDAF-F16 | 1 | |
| PSDAF-F16EXT-CCIOD | PSDAF-F16EXT-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDAF-F16EXT | 1 | |
| PSDAF-KC46A-CCIOD | PSDAF-KC46A-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDAF-KC46A | 1 | |
| PSDDASH8-1-CCIOD | PSDDASH8-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PSDDASH8-1 | 1 | |
| PSP 396 | BOMBARDIER CALIBRATION STANDARD, CL-215T PART 6 FIGURE 5 PAGE 8. A TOTAL OF 15 HOLE SIZES: 4mm THRU 18mm MATERIAL: 2024T3 ALUMINUM. Includes Certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| PSS-MGA-300-A-9V-R | MANOMETRO DIGITAL CALIBRACAO PNEU AERONAVE | 1 | |
| PTS-1-CCIOD | PTS-1-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PTS-1 | 1 | |
| PTS-2-CCIOD | PTS-2-CCIOD;Certified Calibration with Incoming and Outgoing DATA - PTS-2 | 1 | |
| PTS-3 | PTS-3;PTS-3 Calibration Transfer Standard | 1 | |
| PWA 107711 | CALIBRATION STANDARD | 1 | |
| PWA 16600-68 | MASTER FOR CALIBRATION | 1 | |
| PWA 29523 | PEDESTAL-WEIHT,CALIBRATION. | 2 | |
| PWA17795F1 | CALIBRE | 1 | |
| PWA17796F1 | CALIBRE | 1 | |
| PWA211780 | TESTER, CALIBRATION | 1 | |
| PWA25617 | WEIGHT - CALIBRATION_[PWA25617] | 1 | |
| PWA25669 | WEIGHT - CALIBRATION LPC 3RD STG_[PWA25669] | 1 | |
| PWA25700 | WEIGHT,CALIBRATION - HPT 2ND STG STATIC_[PWA25700] | 1 | |
| PWA25770 | WEIGHT - CALIBRATION - HPT DYNAMIC BAL_[PWA25770] | 1 | |
| PWA27740 | WEIGHT, CALIBRATION - HPT DYNAMIC BAL_[PWA27740] | 1 | |
| PWA27764-3 | WEIGHT, CALIB - HPT 2ND STG STATIC BAL_[PWA27764-3] | 1 | |
| PWA27840 | WEIGHT, CALIBRATION - LOW TURBINE FRT_[PWA27840] | 1 | |
| PWA27863 | WEIGHT,CALIBRATION - LPC DYNAMIC BAL_[PWA27863] | 1 | |
| PWA27864 | WEIGHT, CALIBRATION - LPC DYNAMIC BAL_[PWA27864] | 1 | |
| PWA28403 | PRATT & WHITTNEY 1ST STAGE FAN BLADE CALIBRATION STANDARD WITH HOLDING BLOCK . Includes Test Report and Certificate of Conformance. | 4 | |
| PWA28403B | PRATT & WHITTNEY 1ST STAGE FAN BLADE CALIBRATION STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| PWA29961 | CALIBRATION WEIGHT_[PWA29961] | 1 | |
| PWA30278F1 | CALIBRE | 1 | |
| PWA30407F1 | CALIBRE | 1 | |
| PWA30408F1 | CALIBRE | 1 | |
| PWA54674 | CALIBRATION | 1 | |
| PWA678 | CALIBRADOR DE GALGAS | 1 | |
| PWA75061 | CALIBRATION WEIGHT_[PWA75061] | 2 | |
| PWA75062 | CALIBRATION WEIGHT_[PWA75062] | 2 | |
| PWA75063 | CALIBRATION WEIGHT_[PWA75063] | 2 | |
| PWA75064 | CALIBRATION WEIGHT_[PWA75064] | 2 | |
| PWA75268 | CALIBRATION WEIGHT_[PWA75268] | 1 | |
| PWA76098 | FIXTURE-CALIBRATION TRANDUCER BLEED POSITION | 1 | |
| PWA76099 | FIXTURE CALIBRATION-TRANDUCER BLEED POSITION | 1 | |
| PWA76155 | SLING HANDLING (CALIBRATION) | 4 | |
| PWA84314 | SPL-15004 - EDGE CRACK CALIBRATION STANDARD | 1 | |
| PWA85777 | TEST STAND, CALIBRATION, TIEROD TORQUE SYSTEM | 1 | |
| PWA85791 | ADAPTER, CALIBRATION, HPC, 6 & 12 STG TIEROD TORQUE | 1 | |
| PWA85856 | WEIGHT CALIBRATION | 1 | |
| PWA86439 | WEIGHT CALIBRATION | 2 | |
| PWA87086 | ADAPTER, CALIBRATION, HPC, 11 STG TIEROD NUT TORQUE | 1 | |
| PWA87153 | ADAPTER, CALIBRATION, HPC, 9 STG TIEROD NUT TORQUE | 1 | |
| PWC45291 | CALIBRATION PART EDDY CURRENT | 1 | |
| PWC57879 | CALIBRATION PART EDDY CURRENT | 1 | |
| PWC58928 | CALIBRATOR,STANDBY COMPASS | 4 | |
| PWC71565 | CALIBRATION STANDARD | 1 | |
| PWC90284 | TORQUE CALIBRATION CART | 1 | |
| PYR-35-92177-0002 | CALIBRE | 1 | |
| Q21960 | INTERFACE CALIBRATION | 1 | |
| QC-10 | SOUND LEVEL CALIBRATOR | 1 | |
| QC-20 | SOUND CALIBRATOR | 1 | |
| QC6755 | CALIBRATION TOOL | 1 | |
| QC6772 | ULTRASONIC CALIBRATION BLOCK | 1 | |
| QC6852 | CALIBRATION BLOCK | 1 | |
| QC6854 | CALIBRATION BLOCK | 1 | |
| QC6876 | CALIBRATED STRIP TOOL | 1 | |
| QUEST QC-20 | SOUND LEVEL CALIBRATOR | 1 | |
| R006-CAL #5 | JW-500 WEGGING CELL (CALIBRATION) | 1 | |
| R0867-101 | (CALIBRATION FIXTURE) | 1 | |
| RBE-350TRDS-M | TAIL ROTOR DRIVE SHAFT BEARING RUN OUT GAUGE WITH CALIBRATION CERT | 2 | |
| RBT102019 | SERVO ACTUATOR CALIBRATION TOOL | 2 | |
| RBT400234 | Calibrator Assembly (206-215-002-105) | 1 | |
| RC-5S1018 | ALUMINUM STEP CALIBRATION BLOCK | 1 | |
| RCLK5C01S010 | RYNGLOK TOOL KIT (CALIBRATION) | 1 | |
| RD-301-CCIOD | RD-301-CCIOD;Certified Calibration with Incoming and Outgoing DATA - RD-301 | 1 | |
| RDX 7708B | WEATHER RADAR TEST SET (CALIBRATION) | 2 | |
| RDX 7708C | WEATHER RADAR TEST SET (CALIBRATION) | 1 | |
| RDX-CCIOD | RDX-CCIOD;Certified Calibration with Incoming and Outgoing DATA - RDX | 1 | |
| RG430 | CALIBRADOR DIGITAL CON BRAZOS EXTENSORES | 1 | |
| RGS-2000NG-3 | RGS-2000NG-3;3 Yr Total HW Warranty + Certified Calibrations - SILVER-3 | 1 | |
| RGS-2000NG-5 | RGS-2000NG-5;5 Yr Total HW Warranty + Certified Calibrations - SILVER-5 | 1 | |
| RGS-2000NG-CCIOD | RGS-2000NG-CCIOD;Certified Calibration with Incoming and Outgoing DATA - RGS-2000NG | 1 | |
| RH12-T40-7075T6 | CALIBRATION REFERENCE STANDARD (CRS), ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35% TO 45% IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (TECHNA NDT OR EQUIVALENT) | 1 | |
| RH123-C30-2024T3 | 12 hole calibration standard, .030 Corner notches, 3/16" (.187) to 25/64" (.390), 2024T3 Aluminum | 1 | |
| RH20-T20-7075T6 | 20 Hole Calibration Standard, Thru Notches 7075T6 | 1 | |
| RH240-C30M20T20-7075T6 | 24 hole calibration standard, 3/4" - 1 1/2" holes. 030" corner notches, .020 midwall notch, .020" thru-wall, 3 plate stack, 7075T6 | 1 | |
| RH290-C3-304 | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16, Stainless Steel | 1 | |
| RH290-C3-T6AL4V | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16, Titanium | 1 | |
| RH290-C30-2024T3 | 29 hole calibration standard, 1/8" to 1.0", .030" corner notches, per Boeing PT6 51-00-00 FIG16 | 1 | |
| RH290-C3C2-2024T3 | 29 hole calibration standard, 1/8" to 1.0", .030" & .020" corner notches, per Boeing PT6 51-00-00 FIG16 | 1 | |
| RH290-C50-T6AL4V | 29 hole calibration standard, 1/8" to 1.0", .050" corner notches, per Boeing PT6 51-00-00 FIG16, Titanium | 1 | |
| RH290-M30-7075T6 | 29 hole calibration standard, 1/8" to 1.0", .030" deep midwall notches .100 long | 1 | |
| RH80-C30-2024T3 | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, 2024-T3 | 1 | |
| RH80-C30-7075T6 | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, 7075-T6 | 1 | |
| RH80-C30-7475T6 | 8 Hole calibration Standard 1/8 5/32 3/16 7/32 1/4 5/16 3/8 1/2 corner notch 0.30" | 1 | |
| RH80-C30M20-304L | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, .020 midwall notch, 304L | 1 | |
| RH80-C30M20-7075T6 | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, .020 midwall notch, 7075T6 | 1 | |
| RH80-C30M20-T6AL4V | 8 hole calibration standard, 1/8" thru 1/2", .030" corner notches, .020 midwall notch, T6AL4V Titanium | 1 | |
| RH80-M30-7075T6 | 8 hole calibration standard, .030 midwall notch, 7075T6 | 1 | |
| RH80-M30-T6AL4V | 8 hole calibration standard, 1/8" thru 1/2", .030 midwall notch x .100 Long, T6AL4V Titanium | 1 | |
| RH80-T20-2024T3 | 8 hole calibration standard, 1/8" thru 1/2", .020" Thru notches, 2024-T3 | 1 | |
| RH80-T20-7075T6 | 8 Hole Calibration Standard, 1/8" Thru 1/2", .020" Thru notches, 7075T6 | 1 | |
| RH80-T20-T6AL4V | 8 hole calibration standard, 1/8" thru 1/2", .020" Thru notches, T6AL4V | 1 | |
| RH81-C30-7075T6 | 8 hole calibration standard, .625" thru 1.5", increments of .125", .030" corner notches, 7075-T6 | 1 | |
| RH81-C30T20-155 | 8 hole calibration standard, .156" thru .562", .030" corner notches, .020 thru notch, 155SS | 1 | |
| RH81-C30T20-4130 | 8 hole calibration standard, .156" thru .562", .030" corner notches, .020 thru notch, 4130 | 1 | |
| RH84-M30-7075T6 | 8 hole calibration standard, .030 midwall notch, 7075T6, 4.8mm, 6.35mm, 7.9mm, 9.5mm, 11.1mm, 12.7mm, 13.5mm, 14.29mm | 1 | |
| RH85-M30-7075T6 | 8 hole calibration standard, .030 midwall notch, 7075T6, 5mm, 6mm, 7mm, 8.15mm, 9.42mm, 11mm, 12.6mm, 14mm | 1 | |
| RH86-M30-7075T6-MM | 8 hole calibration standard, .030 midwall notch, 7075T6, Hole Sizes; 3.5mm, 5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 15mm, Dimensions of Std. 3" x 6" | 1 | |
| RH87-C30T20-7075T6 | 8 hole calibration standard, .030 corner notch, .020 thru notch, 7075T6, Hole Sizes; .312 - .750, 1/16" increments | 1 | |
| RIN28108706000 | TESTBOX-ACT 802VU (CALIBRATION) | 1 | |
| RM/18LG | TYRE PRESSURE GAUGE WITH DIN CALIBRATION CERTIFICATE | 2 | |
| RM110-C30M20-T6AL4V-1 | 11 hole calibration standard, .125, .187, .25, .312, .375, .437, .50, .562, .625, .687, .75 , T6AL4V, .030 Corner, .020 Midwall and .040, .020, .008 surface notches | 1 | |
| RM120-C20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C30-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 2024-T3 | 1 | |
| RM120-C30-2024T3-1 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 010", .020", .040" surface notches 2024-T3 | 1 | |
| RM120-C30-304 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 304 Stainless | 1 | |
| RM120-C30-4340 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 4340 Steel | 1 | |
| RM120-C30-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C30-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM120-C30C20-2024T3 | 12 hole calibration standard, .030" corner notches, 3/16" to 3/4", 2024T3 Aluminum“2 corner notches 180 deg apart. 0.030’” upper surface and 0.020” on lower surface | 1 | |
| RM120-C30C20-T6AL4V | 12 hole calibration standard, .030" corner notches, 3/16" to 3/4", T6AL4V TI 2 corner notches 180 deg apart. 0.030’” upper surface and 0.020” on lower surface | 1 | |
| RM120-C30M20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" Midwall & .030" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30M20-4340 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" midwall & .030" corner, 008", .020", .040" surface notches 4340 | 1 | |
| RM120-C30M20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" midwall & .030" corner, 008", .020", .040" surface notches 4340 | 1 | |
| RM120-C30T20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30T20-2024T3-1 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 010", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C30T20-2024T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 2024T6 | 1 | |
| RM120-C30T20-304 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 304 SS | 1 | |
| RM120-C30T20-304L | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 304L | 1 | |
| RM120-C30T20-4130 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 4130 | 1 | |
| RM120-C30T20-4340 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 4340 | 1 | |
| RM120-C30T20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C30T20-MAG | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches Magnesium | 1 | |
| RM120-C30T20-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .030" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM120-C30T30-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .030" thru notches & .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-C40T20-2024T3 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .040" corner, 008", .020", .040" surface notches 2024T3 | 1 | |
| RM120-C40T20-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches & .040" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM120-T20-4130 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches, 008", .020", .040" surface notches 4130 | 1 | |
| RM120-T20-7075T6 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" Thru, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM120-T20-I625 | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches, 008", .020", .040" surface notches Inconel 625 | 1 | |
| RM120-T20-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .020" thru notches, 008", .020", .040" surface notches 6AL-4V | 1 | |
| RM120-T40-T6AL4V | 12 hole calibration standard, 3/16" to 3/4" holes, .040" thru notches, 008", .020", .040" surface notches 6AL-4V | 1 | |
| RM121-C30-4130 | 12 hole calibration standard, .030" corner & .010", .020", .040" surface notches, 1/8" to 3/4", .125”,.156”, .187 ", .250”, .312”, .375”, .437”, .500”, .562”, .625”, .687”, .750”, 4130 Steel | 1 | |
| RM121-C30-7075T6 | 12 hole calibration standard, 1/8" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 7075T6 | 1 | |
| RM121-C30-T6AL4V | 12 hole calibration standard, 1/8" to 3/4" holes, .030" corner, 008", .020", .040" surface notches 6AL4V | 1 | |
| RM122-C30-2024T3 | 12 hole calibration standard, .030" corner notches, 1/8" to 13/16", 008", .020", .040" surface notches, 2024T3 Alum | 1 | |
| RM122-C30-4130 | 12 hole calibration standard, .030" corner notches, 1/8" to 13/16", 008", .020", .040" surface notches, 4130 Steel | 1 | |
| RM122-C30-7075T6 | 12 hole calibration standard, .030" corner notches, 1/8" to 13/16", 008", .020", .040" surface notches, 7075-T6 | 1 | |
| RM123-C30-2024T3 | 12 hole calibration standard, .030 Corner notches, 3/16" (.187) to 25/64" (.390), 008", .020", .040" surface notches, 2024T3 Aluminum | 1 | |
| RM130-C30M20-T6AL4V | 13 hole Titanium calibration standard, .030" corner, .020 midwall notches ,5/32" to 3/4" holes .005, .010 and .040 surface notches *similar to 23-55* | 1 | |
| RM140-C50-6AL4V | CALIBRATION TEST STANDARD (CTS) | 1 | |
| RM140-C50-7075T6 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| RM18KS-DIN | CALIBRATION CERTIFICATE FOR RM/18 | 1 | |
| RM200-C30-304L | 20 Hole Calibration Standard, 1/8"-3/4"Ø, .030 Corner, 304L SS, with .008, .020, .040 Surface Notches | 1 | |
| RM200-T40-T6AL4V | 20 Hole Calibration Standard, 1/8"-3/4"Ø, .040 Thru Wall, T6AL4V Titanium, with .008, .020, .040 Surface Notches | 1 | |
| RM6-C40T20-2024T3 | 6 hole calibration standard,( 0.75",1.0", 1.250" , 1.5" , 1.750" , 2.0"..holes, .020" thru notches & .040" corner,..008", .020", .040" surface notches 2024T3 | 1 | |
| RM6-C40T20-T6AL4V | 6 hole calibration standard,( 0.75",1.0", 1.250" , 1.5" , 1.750" , 2.0"..holes, .020" thru notches & .040" corner,..008", .020", .040" surface notches T6AL4V | 1 | |
| RMN | Calibration Certificate for RCP2A | 1 | |
| RPM-X000-CCWA | RPM-X000-CCWA;Service Certified Calibration W/ Adjustments RPM 1000/2000/3000 | 1 | |
| RPM-X000-FRR | RPM-X000-FRR;Fixed Rate Repair and Calibration RPM-1000/-2000/-3000 | 1 | |
| RPR1H01 | Recondition/Recalibrate Twin Head Tyre Gauge (TPG54H03) | 1 | |
| RPR6 | Recalibrate and repair checks on pcb/sensor/screen module and new decals (DAC601) | 1 | |
| RPR64 | Recalibrate and repair checks on pcb/sensor/screen module and new decals (DAC6401) | 1 | |
| RRT051337 | CALIBRATE DUMMY SHAFT | 1 | |
| RRT060843 | INSPECTION TOOL (CALIBRATION) | 1 | |
| RRT060843 (CALIB) | INSPECTION TOOL (CALIBRATION) | 1 | |
| RRT062465 | ULTRASONIC INSP CALIBRATION KIT | 1 | |
| RRT090076 | EEC HEATER (CALIBRATION) | 1 | |
| RS02051M-2024T3 | CALIBRATION STANDARD | 1 | |
| RS0212-1 | CALIBRATION BLOCK | 1 | |
| RS0824-2024T3 | CALIBRATION BLOCK | 1 | |
| RSA-8310-CAL | RSA-8310-CAL;Certified Calibration RSA-8310 | 1 | |
| RSA-8310-FRR | RSA-8310-FRR;Fixed Rate Repair and Calibration of RSA-8310 | 1 | |
| RSAM-CCWA | RSAM-CCWA;Service Certified Calibration with Adjustments for RSAM | 1 | |
| RSAM-FRRC | RSAM-FRRC;Fixed Rate Repair and Calibration RSAM-5600/-5800 | 1 | |
| RSAM-VZ-EW | RSAM-VZ-EW;RSAM Extended Warranty Service for Verizon; includes Calibration | 1 | |
| RSE1112 | SLING SLING INLET COWL (CALIBRATION) | 25 | |
| RSMVS12-15 | CALIBRATION BLOCK SHAFT-ADJUSTABLE MINI ROTATING PROBE | 1 | |
| RSN-7075T6 | CALIBRATION STAND WITH HOLES | 1 | |
| RT-147A | ESIS CALIBRATION TEST SET | 1 | |
| RT-KT-13-40205 | KOWOTEST BAM 15 STEP DENSITY TABLET, CALIBRATED AND TRACEABLE TO NIST, > 0.2 TO > 5.0 D | 1 | |
| RT10-2024T3 | CALIBRATION BLOCK | 1 | |
| RT10-20MM-2024T3-.6/5MM | METRIC 10 STEP CALIBRATION BLOCK 2024-T3 AL | 1 | |
| RT45 | AXLE JACK (ONLY TESTING) (CALIBRATION) | 2 | |
| RT5_75-1018-2_5/12_5MM | THICKNESS CALIBRATION BLOCKS | 1 | |
| RT5_75-7075T6-_25/1_25 | THICKNESS CALIBRATION BLOCKS | 1 | |
| RT6050-00 | AXLE JACK (ONLY TESTING) (CALIBRATION) | 1 | |
| RT8-2024-.028/.095 | UT THICKNESS CALIBRATION BLOCK | 1 | |
| RT8-2024T3-.028/.095 | UT THICKNESS CALIBRATION BLOCK | 1 | |
| RT8-2024T3-028095 | ULTRASONIC CALIBRATION BLOCK | 1 | |
| RTCG-75B | RTCG-75B RETENTION TESTER CALIBRATION GAGE | 2 | |
| S-2249-2 | CALIBRATED PRESSURE GAUGE (0 - 5 PSI) OR (0 - 10 PSI) | 1 | |
| S00-624 | ACCELEROTESTER AND CALIBRATION KIT S00-624 | 1 | |
| S0143 | CALIBRATION PLATE | 1 | |
| S0A57N00614 (CALIB) | TOOLKIT TOOLKIT, SOA (CALIBRATION) | 1 | |
| S0ATLR57102001B (CALIB) | TOOLKIT TOOLKIT, SOA (CALIBRATION) | 1 | |
| S1403-CCIOD | S1403-CCIOD;Certified Calibration with Incoming and Outgoing DATA - S1403 | 1 | |
| S1403DL-CCIOD | S1403DL-CCIOD;Certified Calibration with Incoming and Outgoing DATA - S1403 DL | 1 | |
| S1403RPG-CCIOD | S1403RPG-CCIOD;Certified Calibration with Incoming and Outgoing DATA - S1403 RPG | 1 | |
| S20002023 | CABLE ASSY CALIBRATION ARM | 1 | |
| S2476NC | CALIBRATION PAD | 1 | |
| S320J5001101 | AXLE JACK (CALIBRATION) | 1 | |
| S463530 | CALIBRATION PAWL, SPARE | 1 | |
| SB 57-3329 FIG.9 | Raytheon 12 Hole Standard Calibration Block Figure 9 Page 20, Service Bulletin SB 57-3329. Hole sizes 9/64, 11/64,3/16 and 13/64. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SB10053115PLATE | CALIBRATION PLATE NDT | 1 | |
| SB10053118 | Calibration Standard | 1 | |
| SB10053118PLATE | CALIBRATION PLATE | 1 | |
| SC063 | CALIBRATION COMPASS BARFIELD | 6 | |
| SC4800-CV | SC4800-CV;Calibration Verification for SC4800 | 1 | |
| SC4800-FRR | SC4800-FRR;Fixed Rate Repair and Calibration for SC4800 | 1 | |
| SCA-815009 | AVIONIC SERVICE KIT, INCL. CALIBRATED FLUKE 117 | 1 | |
| SCA-M22521KIT | LARGE CRIMPING TOOL KIT INCL. CALIBRATED FLUKE 115 | 1 | |
| SCA1M-VG8-12 | TYRE INFLATOR INCL. CALIBRATION CERTIFICATE | 1 | |
| SCA1M-VG8-12D | DIGITAL TYRE INFLATOR INCL. CALIBRATION CERTIFICATE | 1 | |
| SCA1M-VG8-12S | TYRE INFLATOR W. SCREW ON CHUCKS INCL. CALIBRATION CERTIFICATE | 1 | |
| SCA65-1AP | AXLE JACK (CALIBRATION) (CALIBRATION) | 3 | |
| SCCS/14-21AL | splitted conical calibration standard | 1 | |
| SCCS/3-7AL | splitted conical calibration standard | 1 | |
| SCCS/7-14AL | splitted conical calibration standard | 1 | |
| SCT-TB1 | TEST BLOCK - SAFETY CABLE INSTALLER CALIBRATION | 5 | |
| SCU-1800-CAL | SCU-1800-CAL;Certified Calibration SCU-1800 | 1 | |
| SCU-1800-FRC | SCU-1800-FRC;Fixed Rate Repair and Calibration SCU-1800 | 1 | |
| SCZ-106 | MASTER SIGHT COMPASS CALIBRATION | 2 | |
| SDA-5500/5510-CCWA | SDA-5500/5510-CCWA;Service Certified Calibration W/ Adjustments for SDA 5500/5510 | 1 | |
| SDA-5500/5510-FRR | SDA-5500/5510-FRR;Fixed Rate Repair and Calibration SDA-5500/-5510 | 1 | |
| SDBOOT.BIN | ASPEN 1000 AIR DATA FIELD CALIBRATION TOOL | 1 | |
| SE.4.44 | 328JET CALIBRATION STANDARD (SE.4.44); 51-60-01 PAGE 9/10 FIG.605 EDDY CURRENT | 1 | |
| SEARCHER-GT-CAL | SEARCHER-GT-CAL;Certified Calibration Searcher GT | 1 | |
| SEARCHER-GT-FRR | SEARCHER-GT-FRR;Fixed Rate Repair and Calibration of Searcher GT | 1 | |
| SEARCHER-PLUS-NEW-CAL | SEARCHER-PLUS-NEW-CAL;Certified Calibration Searcher PLUS NEW | 1 | |
| SEARCHER-PLUS-NEW-FRR | SEARCHER-PLUS-NEW-FRR;Fixed Rate Repair and Calibration of SEARCHER PLUS NEW | 1 | |
| SEARCHER-PLUS-OLD-CAL | SEARCHER-PLUS-OLD-CAL;Certified Calibration Searcher PLUS OLD | 1 | |
| SEARCHER-PLUS-OLD-FRR | SEARCHER-PLUS-OLD-FRR;Fixed Rate Repair and Calibration of SEARCHER PLUS OLD | 1 | |
| SEEKER-BB-2-CAL | SEEKER-BB-2-CAL;Certified Calibration Seeker BB-2 | 1 | |
| SEEKER-BB-2-FRR | SEEKER-BB-2-FRR;Fixed Rate Repair and Calibration of Seeker BB-2 | 1 | |
| SEEKER-CAL | SEEKER-CAL;Certified Calibration Seeker | 1 | |
| SEEKER-D-CAL | SEEKER-D-CAL;Certified Calibration Seeker D | 1 | |
| SEEKER-D-FRR | SEEKER-D-FRR;Fixed Rate Repair and Calibration of Seeker D | 1 | |
| SEEKER-D-LITE-CAL | SEEKER-D-LITE-CAL;Certified Calibration Seeker D LITE | 1 | |
| SEEKER-D-LITE-FRR | SEEKER-D-LITE-FRR;Fixed Rate Repair and Calibration of Seeker D LITE | 1 | |
| SEEKER-FRR | SEEKER-FRR;Fixed Rate Repair and Calibration of Seeker | 1 | |
| SEEKER-LITE-2-CAL | SEEKER-LITE-2-CAL;Certified Calibration Seeker LITE 2 | 1 | |
| SEEKER-LITE-2-FRR | SEEKER-LITE-2-FRR;Fixed Rate Repair and Calibration of SEEKER LITE 2 | 1 | |
| SEEKER-LITE-CAL | SEEKER-LITE-CAL;Certified Calibration Seeker LITE | 1 | |
| SEEKER-LITE-FRR | SEEKER-LITE-FRR;Fixed Rate Repair and Calibration of Seeker LITE | 1 | |
| SEEKER-X-BAT-CAL | SEEKER-X-BAT-CAL;Calibration and Battery Replacement for SEEKER-X | 1 | |
| SEEKER-X-BAT-FRC | SEEKER-X-BAT-FRC;Repair and Calibration with Battery Replacement for SEEKER X | 1 | |
| SEEKER-X-FRC | SEEKER-X-FRC;Seeker X Fixed Rate Repair and Calibration | 1 | |
| SG177 | TRIPOD JACK SET (EMBARER 170/175/190/195) (CALIBRATION) | 3 | |
| SHOCK PROOF | CALIBRATOR VERNIER | 1 | |
| SI1404-CCIOD | SI1404-CCIOD;Certified Calibration with Incoming and Outgoing DATA - SI1404 | 1 | |
| SI40007 | SOUND LEVEL METER/CALIBRATOR Q400 | 1 | |
| SIGMATEST (D2-069) | CALIBRATION STANDARD SET (2 STDS.) 4.4 MS/M (8 IACS);58 MS/M (100 IACS) | 1 | |
| SIMPSON 890-2 | SOUND LEVEL CALIBRATOR | 1 | |
| SK-4500-TC | VSWR METER-COMES WITH CASE, INJECTION CABLE AND CALIBRATION ADAPTER (OPEN, SHORT AND LOAD) | 3 | |
| SK215T-10001 | CALIBRATION STANDARD NACELLE SUPPORT - FORK END & STRUT | 1 | |
| SK215T-10002 | STANDARD CALIBRATION NACELLE - SLOPING LONGERON | 1 | |
| SK601-10021 | CALIBRATION REFERENCE BLOCK SET (TAIL SECTION / HORIZONTAL STABILIZER) - SK601-10021 SERIES (BLOCKS 1 - 5) | 1 | |
| SK601R-10022 | STANDARD CALIBRATION | 1 | |
| SK601R-10040-1 | CALIBRATION REFERENCE | 4 | |
| SK601R-10041 | CALIBRATION STANDARD | 2 | |
| SK601R-10042-1 | TOOL, CALIBRATION STANDARD | 1 | |
| SK601R-20003 | CALIBRATION REFERENCE STANDARD | 2 | |
| SK601R-30001 | CALIBRATION STANDARD | 2 | |
| SK601R-30008A | CALIBRATION STANDARD | 6 | |
| SK601R-30009 | BOMBARDIER CALIBR. REF. STANDARD | 2 | |
| SK601R-30009-1 | CALIBRATION, REFEREN | 5 | |
| SK601R-30013-3 | CALIBRATION STANDARD | 2 | |
| SK601R-30014 | CALIBRATION STANDARD REFERENCE | 2 | |
| SK601R-30014 REV B | CALIBRATION STANDARD | 1 | |
| SK601R-30038 | CALIBRATION STANDARD | 1 | |
| SK601R-30039 | NDT CALIBRATION REFERENCE STANDARD | 2 | |
| SK601R30008A | CALIBRATION, TEST STANDARD | 6 | |
| SK601R30009-1 | CALIBRATION STANDARD BLANK | 5 | |
| SK601R−10043 | Calibration reference standard block (Bombardier Inc.) | 1 | |
| SKCABLERADARCALIB | LAPTOP CABLE - RADAR CALIBRATION | 1 | |
| SKWJ100 | J CALIBRATOR W CASE | 1 | |
| SKWRL105 | MODL RL CALIBRTR W PEL STOR CS | 1 | |
| SLC00007 | INTEGRATION, CONFIGURATION, CALIBRATION, AND CERTIFICATION, SENSOR + INSTRUMENT NIST TRACEABLE, COMP | 1 | |
| SM4215 | ADAPTOR (FOR CALIBRATING THE TOOL WITH THE CABLE ASSEMBLY) | 1 | |
| SMTCLS-FRR | SMTCLS-FRR;Fixed Rate Repair and Calibration SmartClass | 1 | |
| SN10550000-7001 | Calibration Standard, DAC 60-13AI (REV 6-86):DWG No. SN10550000 | 1 | |
| SOA57N00614 | TOOLKIT TOOLKIT, SOA (CALIBRATION) | 1 | |
| SOTDRH-FRR | SOTDRH-FRR;Fixed Rate Repair and Calibration SmartOTDR High | 1 | |
| SOTDRL-FRR | SOTDRL-FRR;Fixed Rate Repair and Calibration SmartOTDR Low | 1 | |
| SP-078 | CALIBRATION STANDARD BATS | 1 | |
| SP-096 | CALIBRATION STANDARD BATS 53-30-30 | 1 | |
| SP-115 | CALIBRATION STANDARD BATS | 1 | |
| SP-1270-CCIOD | SP-1270-CCIOD;Certified Calibration with Incoming and Outgoing DATA - SP-1270 | 1 | |
| SP-737-CCIOD | SP-737-CCIOD;Certified Calibration with Incoming and Outgoing DATA - SP-737 | 1 | |
| SP-747-CCIOD | SP-747-CCIOD;Certified Calibration with Incoming and Outgoing DATA - SP-747 | 1 | |
| SPO-5965.187-.218 | CALIBRATION STANDARD | 1 | |
| SPO-5965.281-.312 | CALIBRATION STANDARD | 1 | |
| SPO-5965.375-.437 | CALIBRATION STANDARD | 1 | |
| SPO-5965.437-.500 | CALIBRATION STANDARD | 1 | |
| SRS-0824A | CALIBRATION TEST STANDARD | 3 | |
| SRS-0824A/7050T74 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| SRS-0824A/7075T6 | CALIBRATION TEST STANDARD (CTS) | 1 | |
| SRS-0824S | CALIBRATION TEST STANDARD | 3 | |
| SRS-0824T | CALIBRATION, REFERENCE | 3 | |
| SRS0824A | CALIBRATION BLOCK | 3 | |
| SRSM-2510A | CALIBRATION STANDARD | 1 | |
| SS TYPE 301 | CALIBRATION STANDARD MADE FROM CRES | 2 | |
| SS-4PDF4 | Valve (Calibrated Gauge Component) | 1 | |
| SSINO54-10-03 | CALIB STANDARD BLOCK (TI) | 1 | |
| ST-21 | CALIBRATED 21-STEP | 1 | |
| ST-8871D | CALIBRATION STANDARD | 4 | |
| ST4130 | CALIBRATION REFERENCE STANDARD, CARBON STEEL 4130 ALLOY, CONTAINING 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ OR COMMERCIALLY AVAILABLE). | 1 | |
| ST4340 | STANDARD, CALIBRATION, NON DEST. TESTING | 5 | |
| ST4340 | STANDARD, CALIBRATION, NON DEST | 5 | |
| ST61189-06 | Plug, Calibrated | 1 | |
| ST8870 | CALIBRATION KIT SHOULD CONTAIN 5 GUIDES ST8870-1, ST8870-4, ST8870-7, ST8870-8, ST8870-9 | 1 | |
| ST8870-1 | HONEYCOMB CALIBRATION | 4 | |
| ST8870-4 | CALIBRATION BLOCK | 4 | |
| ST8870-7 | LAMINATE CALIBRATION STRIP | 4 | |
| ST8870-8 | LAMINATE CALIBRATION STRIP | 5 | |
| ST8870-9 | CALIBRATION BLOCK | 4 | |
| ST8870B-7 | LAMINATE CALIBRATION GUIDE | 3 | |
| ST8870B-8 | LAMINATE CALIBRATION GUIDE | 3 | |
| ST8870B-9 | LAMINATE CALIBRATION GUIDE | 3 | |
| ST8870C-7 | LAMINATE CALIBRATION GUIDE | 2 | |
| ST8870C-8 | LAMINATE CALIBRATION GUIDE | 2 | |
| ST8870C-9 | LAMINATE CALIBRATION GUIDE | 2 | |
| ST8871 | CALIBRATION BLOCK | 4 | |
| ST8871D | CALIBRATION STANDARD | 4 | |
| STD-00107021 | Avcon Industries LFEC Calibration Reference Standard. BNC Document: 00107021, Rev. B Figure 7 Page 22. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| STD-1474 | CALIBRATION / REFERENCE BLOCK | 1 | |
| STD-6501 | BEAKER - CALIBRATED | 1 | |
| STD-CAL-1 | STD-CAL-1;1yr. Renewal Standard Term Calibration Contract - Existing Equipment | 1 | |
| STD67980 | Calibration Fixture-Relief Valve | 1 | |
| SUPER-PLUS-NEW-CAL | SUPER-PLUS-NEW-CAL;Certified Calibration SUPER PLUS NEW | 1 | |
| SUPER-PLUS-NEW-FRR | SUPER-PLUS-NEW-FRR;Fixed Rate Repair and Calibration of SUPER PLUS NEW | 1 | |
| SUPER-PLUS-OLD-CAL | SUPER-PLUS-OLD-CAL;Certified Calibration SUPER PLUS OLD | 1 | |
| SUPER-PLUS-OLD-FRR | SUPER-PLUS-OLD-FRR;Fixed Rate Repair and Calibration of SUPER PLUS OLD | 1 | |
| SWREF 1 | CALIBRATION STANDARD | 2 | |
| SWREF1 | CALIBRATION STANDARD | 2 | |
| T-170695 | CALIBRATION TANK | 1 | |
| T-274 | Switch Calibration Fixture | 1 | |
| T102019 | SERVO ACTUATOR CALIBRATION TOOL | 1 | |
| T11330 | TOOL, NDT CALIBRATION | 3 | |
| T11828 | TOOL, CALIBRATION NDT | 1 | |
| T1203 | DME/XPDR DFIU (CALIBRATION) | 1 | |
| T1401-CCIOD | T1401-CCIOD;Certified Calibration with Incoming and Outgoing DATA - T1401 | 1 | |
| T14521 | T1401-CCIOD;CERTIFIED CALIBRATION WITH I | 2 | |
| T21-035 | TEMPERATURE CALIBRATOR (200-250VAC) | 1 | |
| T22-015 | LH AOA CALIBRATION TOOL | 1 | |
| T22-020 | RH AOA CALIBRATION TOOL | 1 | |
| T2616 | PRECISION PNEUMATIC CALIBRATED | 1 | |
| T3014920 | SWITCH CALIBRATION FIXTURE | 1 | |
| T325923 | SP-300 SYNCHRO CALIBRATION | 1 | |
| T327162 | FLUORESCENT CALIBRATION SOURCE FIXTURE | 1 | |
| T60054 | TEST BAR ASSY CALIBRATING | 1 | |
| TB/MTS-5800-100G-CR | TB/MTS-5800-100G-CR;TB/MTS-5800-100G Calibration Report | 1 | |
| TB1065-1 | CALIBRATION BLOCKS | 1 | |
| TB1065-4 | CALIBRATION BLOCK | 1 | |
| TB5939-1 | IIW-2 CALIBRATION BLOCK 1018 STEEL | 1 | |
| TB5939-1 IIW-2 | CALIBRATION BLOCK 1018 STEEL | 1 | |
| TB5939-2 | CALIBRATION BLOCK | 1 | |
| TB5939-4 | IIW-2 CALIBRATION BLOCK 7075 ALUMINUM | 1 | |
| TB5939-4 IIW-2 | CALIBRATION BLOCK 7075 ALUMINUM | 1 | |
| TB7150-1 | BEAM CALIBRATION BLOCK | 1 | |
| TB7150-4 | V2 CALIBRATION BLOCK | 1 | |
| TC1000A | TEMPERATURE CALIBRATOR | 1 | |
| TCAL-456 | NEW CALIBRATION CERT | 1 | |
| TCAL-456-MU | LONG FORM CERTIFICATE OF CALIBRATION WITH MEASUREMENT UNCERTAINTIES FOR MODEL 456 | 1 | |
| TD1040 | CALIBRADOR DE PASO DE ROSCA | 2 | |
| TDS7104 | OSCILOSCOPE CALIBRATION | 1 | |
| TE-175 | TORQUE 1/2 DRIVE 0-175 LB FT RANGE (CALIBRABLE) | 3 | |
| TE1FUAC | 1/4” DRIVE, TORQOMETER, RANGE: 15IN.LB WITH CALIBRATION CERTIFICATE | 1 | |
| TE2600-5006 | CALIBRATION STAND | 1 | |
| TE60B00019 | HARNESS - CALIBRATION ADAPTER, OIL QUANTITY | 1 | |
| TE60B92016 | VOLUMETRIC TOP-OFF CALIBRATION ADAPTER HARNESS | 1 | |
| TE65B00776 | HARNESS ASSEMBLY - FUEL QUANTITY INDICATOR, CALIBRATION ADAPTER, NUMBER 2 AND NUMBER 3 MAIN AND CENTER WING TANK | 1 | |
| TE65B00776-1 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 1 | |
| TE65B00776-1 -51 -101 | Harness -Calibration Adapter. Fuel Quantity Indicator 2. 3. Main & Center Wing Tank | 1 | |
| TE65B00776-101 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 2 | |
| TE65B00776-51 | HARNESS - CALIBRATION ADAPTER, FUEL QUANTITY INDICATOR 2, 3, MAIN & CENTER WING TANK | 1 | |
| TE6A | TORQUE 1/4 DRIVE 0-75 LB IN RANGE (CALIBRABLE) | 3 | |
| TE747-2-CCIOD | TE747-2-CCIOD;Certified Calibration with Incoming and Outgoing DATA - TE747-2 | 1 | |
| TE79-OS611 | CALIBRATED INFRARED THERMOMETER | 1 | |
| TEA-340-CCIOD | TEA-340-CCIOD;Certified Calibration with Incoming and Outgoing DATA - TEA-340 | 1 | |
| TEE 600 | FLOW CALIBRATOR | 1 | |
| TEK-767-3 | CALIBRATION REFERENCE STANDARD | 1 | |
| TEM-528100-001 | COIN, CALIBRATED | 1 | |
| TEM-CME-040 | TEST PANEL (CALIBRABLE) | 1 | |
| TES-4054332-001 | CALIBRATION TOOL (LH) | 1 | |
| TES-4054332-002 | CALIBRATION TOOL (RH) | 1 | |
| TES3-4054332-001 | Tool-AOA Calibration (LH) | 2 | |
| TES3-4054332-002 | Tool-AOA Calibration (RH) | 2 | |
| TES4054332-001 | TOOL CALIBRATION, ANGLE OF ATTACK | 1 | |
| TES4054332-002 | TOOL CALIBRATION, ANGLE OF ATTACK | 1 | |
| TF50B71307 | ADAPTER FOR CHECKING CALIBRATION | 2 | |
| THICKNESS MEASUREMENT-2024-T3 | Calibration Standard, Embraer 170 PART 1 51-00-00 PG 7,2024-T3 | 1 | |
| THICKNESS MEASUREMENT-6013-T4 | Calibration Standard, Embraer 170 PART 1 51-00-00 PG 7,6013-T4 | 1 | |
| THICKNESS MEASUREMENT-7050-T7 | Calibration Standard, Embraer 170 PART 1 51-00-00 PG 7, 7050-T7 | 1 | |
| TI-6AI-6V-2SN | CALIBRATION REFERENCE STANDARD | 1 | |
| TI-6AL-6V-2SN | CALIBRATION STANDART | 3 | |
| TM-CAL | TM-CAL;Time and Material Calibration | 1 | |
| TM0131G003 | CALIBRE EROSION | 1 | |
| TM400GA-CR | TM400GA-CR;400G Module on ONA-1000 Calibration Report | 1 | |
| TM400GB-CR | TM400GB-CR;400G Module on ONA 800 Calibration Report | 1 | |
| TM405555FG | 4.0MM STEREO MEASUREMENT FORWARD VIEWING INTERCHANGEABLE OPTICAL TIP COLOR: BLACK FOV: 55/55 DEGREES DOF: 5MM TO INF. (0.2" TO INF.) DOV: 0 DEGREES INCLUDES VERIFICATION BLOCK (VER2400C) REQUIRES CALIBRATION REQUIRES STEREO MEASUREMENT SOFTWARE, SOLD SEPA | 2 | |
| TMC1500 | TORQUE WRENCH CALIBRATOR 1500NM | 1 | |
| TMH GA74-00-00 | AIR HYDRAULIC TOOL KIT (TOOL KIT) 3520 NATO (CALIBRABLE) | 2 | |
| TMHGA74-00-00 | AIR HYDRAULIC TOOL KIT (CONTROL TOOL) (CTL) (CALIBRABLE) | 2 | |
| TOOL MICROMETER | DIGITAL CALIBRE | 1 | |
| TORQUE WRENCH | FOR MLG & NLG AXLE NUT WRENCH) FROM 10 TO 40 N·M WITH CALIBARTION LABEL | 1 | |
| TOSLKF50A-20 | SMA FEMALE CALIBRATING KIT | 1 | |
| TOSLN50A-18 | CALIBRATION KIT | 1 | |
| TOV 917509 | CALIBRATION STANDARD | 1 | |
| TOWE170-C-4 | TOWBAREMBRAER170/175/190/195(CALIBRATION)(CALIBRATION) | 2 | |
| TP11 | CALIBRATION BLOCK | 1 | |
| TP38-165 | TEMPRERATURE CALIBRATOR | 1 | |
| TP51SABG01 | TEMPERATURE CALIBRATION | 1 | |
| TP54 | Split Calibration block-AL, A318/A319/A320/A321 51-10-01-PB6 PG 10 FG 51-10-01-991-005-A SHEET 01, A300-600 PT6 51-63-08 PG 601 FG 601, | 2 | |
| TP54-02-1 | SPLIT PARALLEL CALIBRATION BLOCK | 2 | |
| TP54-07-1 | Split Calibration block- Ti | 2 | |
| TP54-10-1 | SPLIT CALIBRATION BLOCK-AL, 15MM-28MM HOLES, A318/A319/A320/A321 NTM 51-63-07, 7075-T6 | 1 | |
| TQ002001 | NDT CALIBRATION BLOCK | 2 | |
| TQ00201 | CALIBRATION BLOCK | 1 | |
| TQFR100C15 | MAIN CALIBRATION SCRW ASSEMBLY | 1 | |
| TQN293 | CALIB BUTTN ROTOR | 1 | |
| TQTP-1000 | TORQUE CALIBRATOR | 1 | |
| TRACKER 094 | CALIBRATION EXPIRES: 11/19/09 | 1 | |
| TRACKER 220 | CALIBRATION EXPIRES: 1/5/11 | 1 | |
| TRACKER 262 | CALIBRATION EXPIRES 4/24/10 | 1 | |
| TRACKER 363 | CALIBRATION EXPIRES: 10/15/09 | 1 | |
| TRACKER 460 | CALIBRATION EXPIRES: 4/2/10 | 1 | |
| TRACKER 721 | CALIBRATION EXPIRES: 4/30/10 | 1 | |
| TRI-PROD-ATE | TRI-PROD-ATE;Trilithic ATE Multi-Calibration Station | 1 | |
| TS-45XX-CCIOD | TS-45XX-CCIOD;Certified Calibration with Incoming and Outgoing DATA - TS-45XX | 1 | |
| TS746APM66 | CALIBRATOR | 1 | |
| TSD10235-TM | TORQUE CALIBRATION SYSTEM | 1 | |
| TTC1530 | 20 IN CALIB ARM 3/8 AND 1/2 SQ | 1 | |
| TTC1540 | 40IN CALIBRATION ARM | 1 | |
| TTC2000SYS | MECHANICAL CALIBRATION SYSTEM | 1 | |
| TTC2000SYS03 | MASTER CALIBRATION SYSTEM | 1 | |
| TTC2800 | MASTER CALIB | 1 | |
| TTC2800-220V | MSTR CALIBRTION SYSTEM | 1 | |
| TTC2800SYS | MOTORIZED CALIBRATION SYSTEM | 1 | |
| TTC280220V1 | MASTER CALIBRATION SYSTEM | 1 | |
| TTC2822SYS | 220 V MOTORIZED CALIB SYS | 1 | |
| TTCCALKIT | TRANSDUCER CALIBRATION KIT | 1 | |
| TYSCCS21-28 | CALIBRATION BLOCK FOR ALUMINUM | 1 | |
| U8750013 | 9744739 MINIMITE LEMO SCANNER. MINIMITE LEMO SCANNER NSN: 6635-01-509-4085 INCLUDES:MINIMITE SCANNER WITH LEMO CONNECTOR (9020268), SCANNER CABLE, CASE,OPERATING MANUAL AND CALIBRATION CERTIFICATE | 2 | |
| U8800581 | SPECIAL TOOLS (1) USE A NONCONDUCTIVE STRAIGHTEDGE DURING CALIBRATION AND THE INSPECTION (FOR SCAN ROWS 1 AND 4). (2) USE A CIRCLE TEMPLATE DURING THE INSPECTION TO DO SEMICIRCULAR SCANS AROUND THE RIVETS (FOR SCAN ROWS 2 AND 3). (S.NO: MGAT/NDT/001) | 1 | |
| U8860182 | Calibration block 99A51107300000 (NDT) | 1 | |
| U8860212 | Calibration block 99A53307274000 (NDT) | 1 | |
| U8880016 | CALIBRATOR, TEST BLOCK 2214M TEST BLOCK. 5-STEP. 1018 CARBON STEEL. METRIC UNIT 2.5 MM, 5.0 MM, 7.5 MM, 10.0 MM, 12.5 MM PRECISION THICKNESS | 1 | |
| UA1420 | SW DCU CALIBRATION | 1 | |
| ULTRASONIC CALIBRATION BLOCK (2 STEP 2-3 MM | ULTRASONIC CALIBRATION BLOCK (2 STEP 2-3 MM | 1 | |
| UPT-34-90 | CALIBRATION PROTRACTOR | 1 | |
| UT 1339/2 | TAY / SPEY TEST SET (CALIBRATION) | 4 | |
| UT-2370 | CALIBRATION STANDARD | 1 | |
| UT-PHT-CALBLK1.A | CALIBRATION STANDARD (K1) ALUMINIUM | 1 | |
| UT-PHT-CALBLK1.CS | CALIBRATION STANDARD (K1) STEEL | 1 | |
| UT-PHT-CALBLK1.SS | CALIBRATION STANDARD (K1) STAINLESS STEEL | 1 | |
| UT-PHT-CALBLK1.WC | WOOD CASE FOR CALIBRATION BLOCK NO. 1 (K1) | 1 | |
| UT-PHT-CALBLK2.1/8-CAL | OPTIONAL DIMENSIONAL INSPECTION REPORT – CERTIFICATE OF CALIBRATION (FOR P/N: UT-PHT-CALBLK2.1/8.CS) | 1 | |
| UT-PHT-CALBLK2.1/8.CS | CALIBRATION STANDARD | 1 | |
| UT-RC-551018-MA | 5 STEP CALIBRATION BLOCK (UT) METRIC 5A(2.5, 5.0, 7.5, 10.0 & 12.5MM) MATERIAL: 1018 CARBON STEEL | 1 | |
| UT-RC-5S-CAL | 5-STEP CALIBRATION BLOCK, DIMENSIONAL CALIBRATION AND SERIALIZATION | 1 | |
| UT-RC-5S-CASE | 5 -STEP CALIBRATION BLOCK, WOOD CASE FOR STANDARD INCH VERSION, CUSTOM INCH VERSION C2 AND METRIC A | 1 | |
| UT-RC-5S1018 | ALUMINUM STEP CALIBRATION LOCK WITH AT LEAST 0.10 | 1 | |
| UT-RC-5S7075-C1 | 5-STEP CALIBRATION BLOCK, 7075 ALUMINUM | 1 | |
| UT-RC-5STITANIUM | 5-STEP CALIBRATION BLOCK, TITANIUM | 1 | |
| UT1560-1 | TAY / SPEY TEST SET (CALIBRATION) | 1 | |
| UT20000 | TAP TESTER (CALIBRATION) | 1 | |
| UT2009 | CALIBRATION TEST BLOCK | 1 | |
| UV-DAS-DT1308C | DT-1308 ECONOMICAL VISIBLE WHITE LIGHT METER, INCLUDES CARRYING CASE, RUBBER BOOT SKIN PROTECTOR, 9V BATTERY AND CALIBRATION CERTIFICATE | 1 | |
| UV-SP-17025-CERT | CALIBRATION CERT | 1 | |
| UV-SP-DM365XA | SPECTRO-UV DM-365XA UV RADIOMETER, INCLUDES 4 NON-RECHARGEABLE 1.5 VOLT ALKALINE BATTERIES, BATTERY LEVEL INDICATOR LIGHT AND CALIBRATION CERTIFICATE. MEASURING RANGE: 0-19,990 MICROWATTS PER CM2 | 1 | |
| UVM3059 | DIGITAL UV LIGHT METER (UVM3059) – MUST HAVE CALIBRATION CERTIFICATE. | 2 | |
| V-2 | BLOCK 2, CALIBRATION | 2 | |
| V1 | BLOCK 1, CALIBRATION | 3 | |
| V1 ALUMINUM STANDARD | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| V1-EN-12223 | CALIBRATION BLOCK | 1 | |
| V1-IIW | ANGLE BEAM CALIBRATION BLOCK | 1 | |
| V1-IIW-CS | V-1 (A-2) IIW Angle Beam Calibration Block (Metric). Made to British Standard: BS-2704, German Standard: DIN 54-120, Australian Standard AS 2803 and ISO 2400. Material: A36/1018 Carbon Steel. Thickness of 1" / 25 mm, Height of 4" / 100 mm for straight bea | 1 | |
| V2 | BLOCK 2, CALIBRATION | 2 | |
| V2 BLOCK | CALIBRATION TEST PIECE | 1 | |
| V2(K2) | CALIBRATION BLOCK | 1 | |
| V2-K2 | CALIBRATION BLOCK | 1 | |
| V2A4.12.5.CS | BLOCK 2, CALIBRATION | 1 | |
| VCM-100 | CALIBRATOR FOR CHARGE - ANALYZERS | 1 | |
| VENTISMX4 | 04 GAS MONITOR (CALIBRABLE) | 1 | |
| VERSATEST600 | TORQUE TESTER/CALIBRATOR | 1 | |
| VIV733-HT-022 | BROCA DE COBALTO CALIBRE-20 | 1 | |
| VIV733-HT-024 | BROCA DE COBALTO CALIBRE-10 | 1 | |
| VM0-130 | CALIBRATING RING FOR MSV | 1 | |
| VM30889-C1A | EDDY CURRENT GENERAL CALIBRATION STANDARD | 2 | |
| VM650CIT-3A | CALIBRATION REFERENCE STANDARD – ROTARY PRPBE KIT | 1 | |
| VM89A | 12 HOLE CALIBRATION STANDARD, 3/16" TO 3/4" HOLES, .030" CORNER, 010", .020", .040" SURFACE NOTCHES | 1 | |
| VOLTAGE CALIBRATION KIT | VOLTAGE CALIBRATION KIT FOR C7 ANALYZERS | 1 | |
| VSE1100-FRR | VSE1100-FRR;Fixed Rate Repair and Calibration VSE-1100 | 1 | |
| VZ-SP-CP-5YP-CW | VZ-SP-CP-5YP-CW;Calibration Plan 5 Year Plan - Verizon pricing CW | 1 | |
| VZ-SP-CP-5YP-PM | VZ-SP-CP-5YP-PM;Calibration Plan 5 Year Plan - Verizon pricing PM | 1 | |
| W-1769 | CALIBRATION TOOL | 1 | |
| WCB2 | CALIBRATION BOX (TOOL) | 1 | |
| WL351EED10 | CALIBRATED INDICATOR | 1 | |
| WP632- CALIBRATI ON | TRACEABLE CALIBRATION OF WOODPECKER WP-632AM-R HANDPIECE TO NATIONAL STANDARDS | 1 | |
| WP632- CALIBRATION | TRACEABLE CALIBRATION | 1 | |
| WP632-CALIBRATION | TRACEABLE CALIBRATION | 1 | |
| WT-107451 | TEST FIXTURE, SENSOR CALIBRATION | 1 | |
| WT-128625 | CALIBRATION TOOL | 1 | |
| WT-128625-10 | CALIBRATION TOOL | 1 | |
| WT-128625-2 | CALIBRATION TOOL | 1 | |
| WT-128625-3 | CALIBRATION TOOL | 1 | |
| WT-128625-4 | CALIBRATION TOOL | 1 | |
| WT-128625-5 | CALIBRATION TOOL | 1 | |
| WT-129665 | CALIBRATION TOOL | 1 | |
| X1267 | BARFIELD FUEL CALIBRATION INSTRUMENTATION | 1 | |
| XBD400-50013-013 | CALIBRATION TEST STANDARDS FOR EXTERNAL SDI USING SPOT PROBE INSPECTION | 1 | |
| XL4TM61105FG | 3D PHASE MEAS. TIP ADAPTER (BLACK) INCL. CALIBRATION | 5 | |
| XLG3TM615050SG | STEREO MEAS. TIM ADAPTER (BLUE) INCL. CALIBRATION | 3 | |
| XLG3TM616060FG | STEREO MEAS. TIM ADAPTER (BLACK) INCL. CALIBRATION | 3 | |
| XTS120-.5 | POWER SUPPLY, DC CALIBRATION | 1 | |
| Y2003 | Thermometer Calibrator | 1 | |
| YH-192 | CALIBRATION DEVICE FOR TEMPERATURE MEASUREMENT, SOLDERING IRON TIP | 1 | |
| YIHUA196 | HOT AIR GUN CALIBRATION DEVICE | 1 | |
| Z65011-101 | CALIBRATION FIXTURE | 1 | |
| ZAHN-SIG-VISC-CUP-NO2 | CALIBRATED VISCOSITY CUP | 1 | |
| ZM200-DN0028 | MANOMETRO VACIO DOBLE ENTRADA (CALIBRABLE) | 1 | |
| D12-10 | CALIBRATING OIL,STANDARD | 1 | |
| D12-30 | CALIBRATING OIL,STANDARD | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
