| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2-887-01-9313S | CAL BLOCK | 6 | |
| 2-887-01-9319 | CAL BLOCK | 1 | |
| 2-887-01-9321 | CAL BLOCK | 1 | |
| 29A029 | CAL BLOCK | 5 | |
| 40-0024-00 | CAL BLOCK | 1 | |
| 98S53005016-000 | CAL BLOCK | 3 | |
| 99A51107299001 | CAL BLOCK | 5 | |
| 99A51107300000 | CAL BLOCK | 5 | |
| 99A53003001101 | CAL BLOCK | 8 | |
| 99A53003001106 | CAL BLOCK | 4 | |
| 99A53307274000 | CAL BLOCK | 5 | |
| 99D51107295000 | CAL BLOCK | 5 | |
| 99D54403000004 | CAL BLOCK | 7 | |
| 99D54403001002 | CAL BLOCK | 4 | |
| 99D54503005000 | CAL BLOCK | 1 | |
| 99D57103005001 | CAL BLOCK | 5 | |
| 99D57103006000 | CAL BLOCK | 5 | |
| 99D57103013000 | CAL BLOCK | 6 | |
| 99D57103015000 | CAL BLOCK | 4 | |
| 99D57103016000 | CAL BLOCK | 7 | |
| 99D57103021000 | CAL BLOCK | 5 | |
| 99D57103032000 | CAL BLOCK | 2 | |
| 99D57103033000 | CAL BLOCK | 2 | |
| 99D57204186000 | CAL BLOCK | 2 | |
| 99F57204105000 | CAL BLOCK | 3 | |
| 99F57204145000 | CAL BLOCK | 4 | |
| 99V51907331000 | CAL BLOCK | 1 | |
| E19057-001 | CAL BLOCK | 1 | |
| SWREF2 | CAL BLOCK | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 10-0108-00 | CALIBRAITION BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 114-1146 | TEST BLOCK TOOL (CALIBRATION) | 1 | |
| (CALIB) 6583102-1 | CALIBRATION BLOCK (CALIBRATION) | 1 | |
| (CALIB) 97A32402018000 | GAGE PRESSURE GAGE-BRAKE BLOCK HYDRA (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S55305011-0003 | CALIBRATION BLOCK (CALIBRATION) | 1 | |
| (CALIB) 98S57105032200 | CALIBRATION BLOCK | 1 | |
| (CALIB) 98S57105032202 | CALIBRATION BLOCK | 1 | |
| (CALIB) 99A53307292001 | Reference Block (NDT) (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D54403007000 | REFERENC REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99D57204164001 | BLOCK-REFERENCE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F53303032000 | REFERENCE BLOCK (CALIBRATION) | 1 | |
| (CALIB) 99F54503011000 | REFERENCE BLOCK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99F54503012000 | REFERENCE BLOCK FOR A330 NTM 54 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99V51907329000 | CALIBRATION BLOCK (CALIBRATION) | 1 | |
| (CALIB) G38004-17 | Blockage Removal Tool - Vacuum Lav System (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G38006-1 | EQUIPMENT - REMOVAL,WASTE BLOCKAGE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) MA8158-7 | FWD Bootstrap Chain Block (CALIBRATION) (CALIBRATION) | 1 | |
| 10-0108-00 | CALIBRATION BLOCK | 1 | |
| 10-0109-00 | CALIBRATION BLOCK | 2 | |
| 10-0120-00 | CALIBRATION BLOCK | 1 | |
| 10-0121-00 | CALIBRATION BLOCK | 1 | |
| 106P12 | CALIBRATION BLOCK (HOCKING) | 1 | |
| 10STEP-IA | CALIBRATION BLOCK - 7075-T6 | 1 | |
| 113-226-000 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 126 | Surface Crack Calibration Block | 7 | |
| 127-0-032 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-0-040 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-0-063 | CORROSION CALIBRATION BLOCK | 1 | |
| 127-XXX | Corrosion reference standard Calibration Block | 1 | |
| 12AAA787 | Mitutoyo 12AAA787 Block for Calibrating Probe Diameter | 1 | |
| 186 | CALIBRATION BLOCK | 1 | |
| 189 | Calibration Block | 7 | |
| 194 | Calibration Block | 9 | |
| 1051 | Calibration Block | 1 | |
| 1052 | Calibration Block | 1 | |
| 1053 | Calibration Block | 1 | |
| 1054 | Calibration Block | 2 | |
| 1077 | Calibration Block | 1 | |
| 1704 | EDDY CURRENT CALIBRATION BLOCK | 7 | |
| 05384 | CALIBRATION BLOCK | 1 | |
| 10471 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 10499 | EDDY CURRENT CALIBRATION BLOCK | 1 | |
| 131387 | EDDY CURRENT CALIBRATION TEST BLOCK | 1 | |
| 149205 | Cal Block No.2-12.5mm (MS) | 1 | |
| 149230 | ISO 19675 PAUT Cal Block | 1 | |
| 149273 | Cal Block No.2-20mm (MS) | 1 | |
| 149279 | DAC Calibration Block (MS) | 1 | |
| 149342 | PA Calibration Block (MS) | 1 | |
| 0426695 | CALIBRATION BLOCK | 1 | |
| 1027421 | CALIBRATION BLOCK | 1 | |
| 1100114 | CALIBRATION BLOCK (2-164-551) NFE | 1 | |
| 171T17969-401 | CALIBRATION BLOCK | 3 | |
| 186A | Calibration Block | 3 | |
| 186ABCDEF | ET CALIBRATION TEST BLOCK | 1 | |
| 186B | Calibration Block | 3 | |
| 186C | Calibration Block | 4 | |
| 186D | Calibration Block | 4 | |
| 186E | Calibration Block | 4 | |
| 186F | Calibration Block | 3 | |
| 188A | CALIBRATION BLOCK | 5 | |
| 194A | Calibration Block | 4 | |
| 194C | CALIBRATION BLOCK | 1 | |
| 2-069-69-0002 | PROBE & CALIBRATION BLOCK SET | 1 | |
| 2-164- 501 | CALIBRATION BLOCK (STEEL) | 4 | |
| 2-164-501 | AIRBUS EDDY CURRENT CALIBRATION BLOCK 4340 STEEL, 51-10-00-250-801 and 51-63-991-001 PAGE 601 FIGURE 601. Includes Test Report and Certificate of Conformance. | 4 | |
| 2-164-55 | CALIBRATION BLOCK | 1 | |
| 2-164-551 | CALIBRATION BLOCK | 2 | |
| 2-164-551-2024T3 | CALIBRATION BLOCK | 1 | |
| 2-835-01-9301 | AIRBUS CALIBRATION BLOCK, STAINLESS STEEL, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 | 2 | |
| 2-835-01-9330 | AIRBUS CALIBRATION BLOCK, 6AL-4v TITANIUM, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 | 2 | |
| 2-835-01-9331 | AIRBUS CALIBRATION BLOCK. MATERIAL: 304 Stainless Steel, 0.2mm, 0.5mm, 1mm EDM SLOTS. PART 6: 51-63-01 page 601 figure 601 Includes Test Report and Certificate of Conformance. | 1 | |
| 2-887-01- 9313S | SPLIT CONICAL CALIBRATION BLOCK | 6 | |
| 2-887-01-9313S | CALIBRATION BLOCK.. | 6 | |
| 2-887-01-9314S | SPLIT CONICAL CALIBRATION BLOCK | 5 | |
| 2-887-01-93155 | SPLIT CONICAL CALIBRATION BLOCK | 1 | |
| 2-887-01-9315S | SPLIT CONICAL CALIBRATION BLOCK | 4 | |
| 2-887-01-9316S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9319S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9321S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9323S | CALIBRATION BLOCK | 3 | |
| 2-887-01-9325S | CALIBRATION BLOCK | 3 | |
| 2-887-019313S | SPLIT CONICAL CALIBRATION BLOCK | 6 | |
| 2-887-9325S | CALIBRATION BLOCK | 2 | |
| 2.164-551 | CALIBRATION BLOCK | 2 | |
| 2.164-551 NFE | ALUIMUM CAL. BLOCK | 1 | |
| 2.887.01-9313-S | CALIBRATION BLOCKS FOR ROTOTEST | 6 | |
| 2.887.01-9314-S | CALIBRATION BLOCKS FOR ROTOTEST | 5 | |
| 2.887.01-9315-S | CALIBRATION BLOCKS FOR ROTOTEST | 4 | |
| 2.887.01-9316-S | CALIBRATION BLOCKS FOR ROTOTEST | 3 | |
| 20-3261 | Trimos 20-3261 Gauge Block Calibration Module QM-BLOCK | 1 | |
| 2000-250-02 | CALIB. STAND BLOCK AND HDWE | 1 | |
| 2067/7075-T6 | 5 STEP CALIBRAITION BLOCK | 1 | |
| 2211M | 5-STEP CALIBRATION BLOCK, 304 STAINLESS STEEL | 1 | |
| 2213E | THICK CALIBRATION BLOCK | 1 | |
| 2213M | THICKNESS CALIBRATION BLOCKS | 1 | |
| 2214M | 5-STEP CALIBRATION BLOCK, 1018 CARBON STEEL | 1 | |
| 2218M | CALIBRATION BLOCK (1MM - 15MM) | 1 | |
| 235505 | CALIBRATION BLOCK | 1 | |
| 26217075-T6 | CTS CALIBRATION BLOCK | 1 | |
| 27-95031-001 | Calibration Block, Fairchild SA226-32-065:PG8 FIG1 | 2 | |
| 29A028 | CAL. BLOCK | 4 | |
| 29A029 | A318-319-320-321 Calibration Block | 5 | |
| 29A030 | CALIBRATION BLOCK | 1 | |
| 29A032 | CAL. BLOCK | 3 | |
| 29A047 | A318-319-320-321 Calibration Block | 5 | |
| 29A049 | AUSTENITIC STEEL CALIBRATION BLOCK | 2 | |
| 3-NOTCHEC | 6AL-4V TITANIUM ALLOY CALIB. BLOCK | 1 | |
| 310-3 | ELECTRICAL BLOCK | 5 | |
| 335 | Calibration Block | 10 | |
| 382-57-74 82-688 | HERCULES CALIBRATION BLOCK 382-57-74 82-688 | 1 | |
| 3NOTCHEC.IT | 6AL-4V TITANIUM ALLOY CALIB. BLOCK | 1 | |
| 516-122-10 | Mitutoyo 516-122-10 / Steel Caliper Gauge Block Set, Metric, Grade 1 | 1 | |
| 53-10-110A | CALIBRATION BLOCK | 2 | |
| 530G12401-1 | CALIBRATION BLOCK KIT FOR CRANKSHAFT INSPECTION | 1 | |
| 530G12406-1-3 | CALIBRATION STANDARDS-STEEL BLOCKS,SET OF 3 | 1 | |
| 553444 | Henkel 98272 LOCTITE White 14 Gauge 1-14 Helical Thread & UV Light Block Additive Polyethylene Tapered Tip Dispense Needle - Pack of 50 | 1 | |
| 57-10-102-2 | BAE146 NDT CALIBRATION BLOCK | 1 | |
| 57-10-102-4 | BAE146 NDT CALIBRATION BLOCK | 1 | |
| 59108 | NDT CALİBREASYON BLOCK (K1) | 1 | |
| 640-050-002 | CALIBRATION BLOCK | 2 | |
| 6583102-1 | CALIBRATION BLOCK | 1 | |
| 70521 | THICKNESS CALIBRATION BLOCK, 05 STEPS (0.100 / 0.200 / 0.300 / 0.400 AND 0.500 INCH) | 1 | |
| 570626 | Henkel 98273 LOCTITE White 14 Gauge 1-14 Helical Thread & UV Light Block Additive Polyethylene Tapered Tip Dispense Needle - Pack of 1000 | 1 | |
| 640-025-010 | EC SPLIT CONICAL CALIB. BLOCK - TITANIUM | 1 | |
| 6635000220368 | ULTRASONIC TESTING SPARES:- BASIC CALIBRATION BLOCK FOR ULTRASONIC TESTER | 1 | |
| 6635010925129 | UT CALIBRATION BLOCK | 1 | |
| 7075-3-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-012 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-025 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-050 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-075 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-150 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-5-0-600 | CALIBRATION BLOCK | 1 | |
| 7075-8-0-300 | CALIBRATION BLOCK | 1 | |
| 7075-8-0-600 | CALIBRATION BLOCK | 1 | |
| 7175T7351 | NDT CALIBRATION BLOCK - 7175T7351 - RANGE: 2MM | 1 | |
| 7175T7351 - RANGE 1MM TO 25MM | THICKNESS CALIBRATION BLOCK | 1 | |
| 7175T7351 - RANGE: 2MM TO 12.5MM | ULTRASONIC THICKNESS GAUGE CALIBRATION BLOCK | 1 | |
| 718 | ULTRASONIC CALIBRATION BLOCK FOR INCONEL 718 | 1 | |
| 7637987-1 | Calibration Block | 1 | |
| 8400-91 | BASE, ACRYLIC V-BLOCK, 8400 OPTICAL MIC | 2 | |
| 8400K | CALIBRATION BLOCK - STANDARD | 7 | |
| 88660 | Henkel 97221 LOCTITE Gray 16 Guage 1-14 Helical Thread & UV Light Block Additive HDPE Tapered Tip Dispense Needle - Pack of 50 | 1 | |
| 88661 | Henkel 97222 LOCTITE Green 16 Guage 1-14 Helical Thread & UV Light Block Additive HDPE Tapered Tip Dispense Needle - Pack of 50 | 3 | |
| 88662 | Henkel 97223 LOCTITE Pink 20 Guage 1-14 Helical Thread & UV Light Block Additive HDPE Tapered Tip Dispense Needle - Pack of 50 | 1 | |
| 88663 | Henkel 97224 LOCTITE Blue 22 Gauge 1-14 Helical Thread & UV Light Block Additive HDPE Tapered Tip Dispense Needle - Pack of 50 | 1 | |
| 972001 | CALIBRATED STEP BLOCK KIT | 1 | |
| 981-102 | ANGLE CALIBRATION BLOCKS SET | 1 | |
| 98A53803501000 | CALIBRATION BLOCK | 1 | |
| 98A53P03020000 | CALIBRATION BLOCK | 1 | |
| 98A54003069000 | CALIBRATION BLOCK | 3 | |
| 98A54003075 | CALIBRATION BLOCK | 2 | |
| 98A54003077 | CALIBRATION BLOCK | 2 | |
| 98D51407291001 | CALIBRATION BLOCK SET | 1 | |
| 98S51605001000 | CALIB REFERENCE BLOCKS | 2 | |
| 98S53005014000 | NDT CALIBRATION BLOCK | 3 | |
| 98S53005020-200 | ECI CAL BLOCK | 2 | |
| 98S53005020-202 | CALIBRATION BLOCK | 2 | |
| 98S53005020-202 | ECI CAL BLOCK | 2 | |
| 98S53005020-204 | ECI CAL BLOCK | 2 | |
| 98S53005020-206 | ECI CAL BLOCK | 2 | |
| 98S53005020-208 | ECI CAL BLOCK | 3 | |
| 98S53005020-210 | ECI CAL BLOCK | 2 | |
| 98S53005020-212 | ECI CAL BLOCK | 2 | |
| 98S53005020-214 | ECI CAL BLOCK | 2 | |
| 98S53005020-216 | ECI CAL BLOCK | 2 | |
| 98S53005021-000 | ECI CAL BLOCK | 3 | |
| 98S53305004-000 | U/T CAL BLOCK | 5 | |
| 98S53305005-000 | U/T CAL BLOCK | 5 | |
| 98S53505003-200 | U/T CAL BLOCK | 4 | |
| 98S53505006-000 | U/T CAL BLOCK | 4 | |
| 98S54305002-200 | U/T CAL BLOCK | 5 | |
| 98S54305002200 | CALIBRATION BLOCK | 5 | |
| 98S55305011-0003 | CALIBRATION BLOCK | 1 | |
| 98S55305011-100 | CALIBRATION BLOCK | 1 | |
| 98S57105004-200 | U/T CAL BLOCK | 4 | |
| 98S57105006-200 | U/T CAL BLOCK | 3 | |
| 98S57105010200 | CALIBRATION BLOCK | 3 | |
| 98S57105012-200 | CALIBRATION BLOCK | 3 | |
| 98S57105012200 | CALIBRATION BLOCK | 3 | |
| 98S57105015-200 | U/T CAL BLOCK | 3 | |
| 98S57105032-200 | U/T CAL BLOCK | 3 | |
| 98S57105032-202 | U/T CAL BLOCK | 3 | |
| 98S57205030.000 | CALIBRATION BLOCK | 3 | |
| 98S57205030.001 | CAL BLOCK COMPOSITE | 4 | |
| 98S57205030.004 | CAL BLOCK COMPOSITE | 5 | |
| 98S57205030000 | WING UPPER PANEL CALIBRATION BLOCK | 3 | |
| 98S57205030001 | CARBON CALIBRATION BLOCK | 4 | |
| 98S57205030004 | CARBON CALIBRATION BLOCK | 5 | |
| 9970-958-579 | CALIBRATION BLOCK | 1 | |
| 99A51003000000 | CALIBRATION BLOCK | 2 | |
| 99A51107299001 | Calibration Block | 5 | |
| 99A51107300000 | Calibration Block | 5 | |
| 99A51107399001 | Calibration Block | 1 | |
| 99A530003001101 | CALIBRATION BLOCK ALUMINUM | 1 | |
| 99A53003001100 | Calibration Block | 4 | |
| 99A53003001101 | Calibration Block | 8 | |
| 99A53003001102 | Calibration Block | 5 | |
| 99A53003001103 | Calibration Block | 4 | |
| 99A53003001104 | Calibration Block Titanium TA6V | 4 | |
| 99A53003001105 | Calibration Block | 4 | |
| 99A53003001106 | Calibration Block | 4 | |
| 99A53003001107 | Calibration Block Titanium TA6V | 4 | |
| 99A53003001108 | Figure 1 Calibration Block | 4 | |
| 99A53107215000 | CALIBRATION BLOCK | 5 | |
| 99A53107251000 | CALIBRATION BLOCK | 2 | |
| 99A53107269000 | Calibration Block | 1 | |
| 99A53107283000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99A53107287000 | Calibration Block | 7 | |
| 99A53107290000 | Calibration Block | 1 | |
| 99A53203007000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99A53307236000 | CALIBRATION BLOCK | 4 | |
| 99A53307267000 | CALIBRATION BLOCK | 2 | |
| 99A53307267000 304 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307267000 7075T6 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material Aluminum 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307267000/7150-T6 | AIRBUS A300-600 CALIBRATION BLOCK | 1 | |
| 99A53307274000 | CALIBRATION BLOCK | 5 | |
| 99A53307274000-7075 | CALIBRATION BLOCK | 1 | |
| 99A53307292000 | CALIBRATION BLOCK | 1 | |
| 99A53307292001 | Calibration Block | 4 | |
| 99A53307319000 | CALIBRATION BLOCK | 2 | |
| 99A53404001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99A53404002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99A53404003000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99A53407285000 | Calibration Block | 1 | |
| 99A53507286000 | CALIBRATION BLOCK | 2 | |
| 99A54003098000 | Calibration Block | 1 | |
| 99A54403002000 | NDT NDT CALIBRATION BLOCK | 3 | |
| 99A55307306000 | CALIBRATION BLOCK | 2 | |
| 99A55307328000 | CALIBRATION BLOCK - Fab. Stufenblock 80mm | 1 | |
| 99A55407291000 | CALIBRATION BLOCK | 5 | |
| 99A57004001286 | Calibration Block | 1 | |
| 99A57004101000 | Calibration Block | 6 | |
| 99A57004101000-MOD | CALIBRATION BLOCK (NDT) | 1 | |
| 99A57103005002 | NDT NDT CALIBRATION BLOCK | 3 | |
| 99A57103054000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99A57104331000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 57-00-00-991-003-A SHEET 01, PAGE 10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A57204403000 | CALIBRATION BLOCK | 3 | |
| 99A57204403001 | REFERENCE STANDARD - CALIBRATION BLOCK | 5 | |
| 99A57257327000 | CALIBRATION BLOCK | 1 | |
| 99A57403001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99A57504296000 | CALIBRATION BLOCK | 3 | |
| 99D51103001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D51103004000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D51103005000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51103006000 | BLOCK NDT CALIBRATION BLOCK | 1 | |
| 99D51103007000 | BLOCK NDT CALIBRATION BLOCK | 1 | |
| 99D51103008000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D51103009000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D51103010000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D51103011000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D51103012000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D51103013000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99D51103014000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D51103015000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D51103016000 | BLOCK NDT CALIB STND | 1 | |
| 99D51103017000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D51107295000 | CALIBRATION BLOCK | 5 | |
| 99D51303001000 | NDT CALIBRATION BLOCK | 1 | |
| 99D51307001000 | CALIBRATION BLOCK | 1 | |
| 99D51407291000 | Calibration Block | 2 | |
| 99D51407291001 | CALIBRATION BLOCK SET | 7 | |
| 99D51407291001 | CALIRATION BLOCK SET - PATRON HFEC | 7 | |
| 99D52809004000 | CALIBRATION BLOCK | 7 | |
| 99D53103000000 | NDT NDT CALIBRATION BLOCK | 5 | |
| 99D53103001000 | CALIBRA REFER BLOCK | 2 | |
| 99D53203000002 | CALIBRATION BLOCK | 5 | |
| 99D53203001000 | TOOL NDT CALIBRATION BLOCK | 1 | |
| 99D53409001000 | Calibration Block | 5 | |
| 99D54403000004 | NDT NDT CALIBRATION BLOCK | 7 | |
| 99D54403000005 | CALIBRATION BLOCK | 1 | |
| 99D54403000006 | CALIBRATION REFERENCE BLOCK | 1 | |
| 99D54403001002 | NDT CALIBRATION BLOCK | 4 | |
| 99D54403002000 | NDT NDT CALIBRATION BLOCK | 4 | |
| 99D54403003000 | NDT NDT CALIBRATION BLOCK | 4 | |
| 99D54403004000 | NDT NDT CALIBRATION BLOCK | 6 | |
| 99D54403007000 | NDT NDT CALIBRATION BLOCK | 3 | |
| 99D54503004000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 54-52-17-991-003-A SHEET 01, PAGE7. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503005000 | CAL BLOCK TOOLKIT | 1 | |
| 99D54503005040 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D54503005041 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D54503005042 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D54503006000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-08-991-007-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D54503007000 | AIRBUS CALIBRATION BLOCK : PART 4 54-53-09-991-003-A SHEET 01. MATERIAL: 15-5PH STEEL. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D55109001000 | CALIBRATION BLOCK SET | 7 | |
| 99D55109001000 | CALIRATION BLOCK SET - PATRON HFEC | 7 | |
| 99D55367001000 | CALIBRATION BLOCK - FABRIC | 1 | |
| 99D55367002000 | CALIBRATION BLOCK - TAPE | 1 | |
| 99D57003007000 | CALIBRATION BLOCK | 2 | |
| 99D57003009000 | CALIBRATION BLOCK | 2 | |
| 99D57003011000 | CALIBRATION BLOCK | 2 | |
| 99D57004000000 | CALIBRATION BLOCK | 4 | |
| 99D57004001000 | Calibration Block | 4 | |
| 99D57103002001 | CALIBRATION BLOCK | 5 | |
| 99D57103004000 | CALIBRATION BLOCK | 4 | |
| 99D57103005001 | NDT NDT CALIBRATION BLOCK | 5 | |
| 99D57103006000 | CALIBRATION BLOCK | 5 | |
| 99D57103007000 | Calibration Block | 3 | |
| 99D57103008000 | CALIBRATION BLOCK | 6 | |
| 99D57103009000 | CALIBRATION BLOCK | 4 | |
| 99D57103010000 | CALIBRATION REFERENCE BLOCK | 5 | |
| 99D57103011000 | CALIBRATION BLOCK | 5 | |
| 99D57103012000 | CALIBRATION BLOCK | 6 | |
| 99D57103013000 | CALIBRATION REFERENCE BLOCK | 6 | |
| 99D57103014000 | NDT NDT CALIBRATION BLOCK | 5 | |
| 99D57103015000 | Calibration Block | 4 | |
| 99D57103016000 | Calibration Block | 7 | |
| 99D57103017000 | CALIBRATION BLOCK | 5 | |
| 99D57103018000 | CALIBRATION BLOCK | 4 | |
| 99D57103019000 | CALIBRATION BLOCK | 4 | |
| 99D57103020000 | Calibration Block | 3 | |
| 99D57103021000 | Calibration Block | 5 | |
| 99D57103023000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D57103024000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D57103025000 | NDT CALIBRATION BLOCK | 2 | |
| 99D57103026000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99D57103027000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D57103028000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D57103029000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D57103030000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D57103031000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99D57103032000 | CALIBRATION BLOCK | 2 | |
| 99D57103034000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99D57103035000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99D57103036000 | CALIBRATION BLOCK | 2 | |
| 99D57204105000 | NDT NDT CALIBRATION BLOCK | 5 | |
| 99D57204107000 | CALIBRATION BLOCK | 6 | |
| 99D57204163000 | NDT NDT CALIBRATION BLOCK | 3 | |
| 99D57204164000 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57204164001 | CALIBRATION REFERENCE BLOCK | 4 | |
| 99D57204167000 | Calibration Block | 2 | |
| 99D57204169000 | NDT NDT CALIBRATION BLOCK | 3 | |
| 99D57204170000 | NDT NDT CALIBRATION BLOCK | 3 | |
| 99D57204171000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99D57204189000 | CALIBRATION BLOCK | 1 | |
| 99D57204190000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D57204196000 | NDT CALIBRATION BLOCK | 2 | |
| 99D57204197000 | NDT CALIBRATION BLOCK | 2 | |
| 99D57294001000 | Airbus A318/A319/A320/A321 Calibration Block, Figure 57-29-08-991-023-A. Material: Cast Acrylic. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57404001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D57404002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99D57504100000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99D57504102000 | NDT NDT CALIBRATION BLOCK | 4 | |
| 99D57504103001 | TOOL NDT CALIBRATION BLOCK | 3 | |
| 99D57504107000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99D57504108000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99D57504109000 | TOOL NDT CALIBRATION BLOCK | 3 | |
| 99D57704100000 | NDT NDT CALIBRATION BLOCK | 3 | |
| 99D91107295000 | CALIBRATION BLOCK | 1 | |
| 99F53103001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53103004000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53103005000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53103006000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53103008000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53103009000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53103010000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53107330000 | CALIBRATION TEST BLOCK SET | 2 | |
| 99F53113000000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53113001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53113004000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53113006000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53207313000 | CALIBRATION BLOCK | 3 | |
| 99F53207314000 | CALIBRATION BLOCK | 2 | |
| 99F53207316000 | Airbus Standard A330 53-21-36-PB6 PG 16 FIGURE 53-21-36-991-004-A SHEET 01..Calibration Block PN 99F53207316000 | 1 | |
| 99F53207317000 | Airbus Standard A330 53-21-36-PB6 PG 18 FIGURE 53-21-36-991-005-A SHEET 01..Calibration Block PN 99F53207317000 | 1 | |
| 99F53207318000 | Airbus Standard A330 53-21-36-PB6 PG 20 FIGURE 53-21-36-991-006-A SHEET 01..Calibration Block PN 99F53207318000 | 1 | |
| 99F53303001001 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53303008001 | CALIBRATION BLOCK | 2 | |
| 99F53303010000 | CALIBRATION BLOCK | 2 | |
| 99F53303017000 | CALIBRATION BLOCK | 3 | |
| 99F53303026000 | CALIBRATION BLOCK | 1 | |
| 99F53303027000 | CALIBRATION BLOCK | 1 | |
| 99F53303030000 | CALIBRATION BLOCK | 1 | |
| 99F53303031000 | CALIBRATION BLOCK | 1 | |
| 99F53303057000 | CALIBRATION BLOCK | 1 | |
| 99F53303086000 | CALIBRATION BLOCK | 5 | |
| 99F53303092000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53303094000 | CALIBRATION BLOCK | 2 | |
| 99F53303095000 | CALIBRATION BLOCK | 2 | |
| 99F53303099000 | CALIBRATION BLOCK | 3 | |
| 99F53303100000 | CALIBRATION BLOCK | 1 | |
| 99F53303101000 | CALIBRATION BLOCK | 2 | |
| 99F53303105000 | CALIBRATION BLOCK | 1 | |
| 99F53303115000 | NDT NDT CALIBRATION BLOCK | 3 | |
| 99F53303118000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99F53303122000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53303125000 | CALIBRATION BLOCK | 2 | |
| 99F53303126000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53303127000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53307305001 | CALIBRATION BLOCK | 5 | |
| 99F53403002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53403003000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F53407333000 | CALIBRATION BLOCK | 1 | |
| 99F53507256000 | CALIBRATION BLOCK | 2 | |
| 99F54503000000 | CALIBRATION BLOCK | 2 | |
| 99F54503011000 | CALIBRATION BLOCK | 2 | |
| 99F54503012000 | CALIBRATION BLOCK | 2 | |
| 99F55364009000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F57004100001 | Calibration Block | 4 | |
| 99F57004101001 | BLOCK-CALIBRATION | 4 | |
| 99F57103017000 | Calibration Block | 3 | |
| 99F57103028000 | CALIBRATION BLOCK | 2 | |
| 99F57103054000 | CALIBRATION BLOCK | 2 | |
| 99F57103056000 | Calibration Block | 1 | |
| 99F57103057000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F57103058000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F57103059000 | NDTBLOCK NDT CALIBRATION BLOCK | 1 | |
| 99F57204102000 | Calibration Block | 7 | |
| 99F57204105000 | CALIBRATION BLOCK | 3 | |
| 99F57204106000 | CALIBRATION BLOCK | 4 | |
| 99F57204124000 | CALIBRATION BLOCK | 2 | |
| 99F57204130000 | CALIBRATION BLOCK | 4 | |
| 99F57204145000 | NDT NDT CALIBRATION BLOCK | 4 | |
| 99F57204172000 | NDT NDT CALIBRATION BLOCK | 2 | |
| 99F57204173000 | NDT NDT CALIBRATION BLOCK | 3 | |
| 99F57204174000 | CALIBRATION BLOCK | 2 | |
| 99F57204175000 | CALIBRATION BLOCK | 2 | |
| 99F57204176000 | CALIBRATION BLOCK | 2 | |
| 99F57403001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99F57404001000 | NDT CALIBRATION BLOCK | 1 | |
| 99G53403001000 | NDT CALIBRATION BLOCK | 1 | |
| 99L51 107323000 | CALIBRATION BLOCK SET | 1 | |
| 99L51107323000 | CALIBRATION BLOCK SET | 1 | |
| 99L51304001000 | NDT CALIBRATION BLOCK | 1 | |
| 99L52107325000 | CALIBRATION BLOCK | 1 | |
| 99L52323000000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103000000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103004000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103005000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103006000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103008000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103010000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103012000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103013000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103015000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53103020000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53113002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303003000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303004000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303005000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303008000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303010000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303018000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303021000 | AIRBUS A380-800 CALIBRATION BLOCK 53-31-33-991-006-A (SHEET 01& 02) PAGES 20-21. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303024000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303032000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303034000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303035000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53303036000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53403001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53509001000 | CALIBRATION BLOCK | 1 | |
| 99L53509002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53509003000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53509006000 | CALIBRATION BLOCK | 1 | |
| 99L53509008000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L53509011000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L54503003000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L54503004000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L54503006000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L55209001000 | CALIBRATION BLOCK | 1 | |
| 99L55209002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L57103002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L57203002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L57203006000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L57203009000 | BLOCK CALIBRATION BLOCK | 1 | |
| 99L57204005000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L57204008000 | AIRBUS A310 CALIBRATION SENSITIVITY BLOCK PART4 57-29-01 PAGE 418 FIGURE 408. Includes Test Report and certificate of Conformance. | 1 | |
| 99L57204068000 | AIRBUS CALIBRATION BLOCK A380-800 57-21-17-991-024-A. MATERIAL: 2024 HDT T351. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57403001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L57403002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L57403003000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99L71003001000 | CALIBRATION BLOCK | 1 | |
| 99N28207315000 | Calibration Block | 4 | |
| 99N51109009000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 11. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99N51109010000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 12. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99V51303001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V51307001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V51307002000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V51307003000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V51307004000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V51307008000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51907329000 | CALIBRATION BLOCK | 2 | |
| 99V51907331000 | CALIBRATION BLOCK | 1 | |
| 99V52307335000 | CALIBRATION BLOCK | 1 | |
| 99V52307336000 | CALIBRATION BLOCK | 1 | |
| 99V52803001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V53303003000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V533030040 00 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V53303004000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V53404001000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V53509008000 | NDT NDT CALIBRATION BLOCK | 1 | |
| 99V57103001000 | BLOCK NDT CALIBRATION BLOCK | 1 | |
| 99V57103002000 | Calibration Block-issue C | 2 | |
| 99V57200003000 | CALIBRATION BLOCK | 3 | |
| A2000-217 | DECAL-VERTICAL BLOCK | 2 | |
| A289A | ASSY Calibration Block Calibration Block | 1 | |
| A330-93905-0001 | CALIBRATION BLOCK | 1 | |
| A386 | Calibration Block | 2 | |
| A389A | Calibration Block | 3 | |
| A389B | Calibration Block | 2 | |
| A389C | Calibration Block | 2 | |
| A6 | CALIBIRATION BLOCK | 1 | |
| A8-AF-CAL-BLOCK | CALIBRATION CHECK BLOCK | 1 | |
| AFNDT-032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1006AL | CUSTOM 3 STEP CALIBRATION BLOCK 2024-T3 ALUMINUM, STEP SIZES 1.0" x 2.0" FACE. STEP THICKNESSES OF 0.100", 0.200" and 0.400" +/-.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1006CS | CUSTOM 3 STEP CALIBRATION BLOCK 4340 CARBON STEEL, STEP SIZES 1.0" x 2.0" FACE. STEP THICKNESSES OF 0.100", 0.200" and 0.400" +/-.002" PER DC-10 54-10-11 FIGURE 603 SHEET 43 PAGE 655. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015 | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE.0.190-0.194, countersink: 100 degrees, 0.3748-0.3819 diameter....0.203-0.207, countersink: 100 degrees, 0.3748-0.3819 diameter....0.2172-0.2182, co... | 1 | |
| AFNDT-1015-CALCS | CALIBRATION BLOCK 4140S. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-CALSS | CALIBRATION BLOCK 304SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-CS/MM | CUSTOM 4 STEP CALIBRATION BLOCKS CARBON STEEL , 54MM, 10MM, 15MM, 20MM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-INC625 | CALIBRATION STANDARD INCOLNEL BLOCK 625 5X1 OAL .10,.20,.30,.40,.50. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-SS/MM | CUSTOM 4 STEP CALIBRATION BLOCKS STAINLESS STEEL , 54MM, 10MM, 15MM, 20MM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015/2024 | CUSTOM 4 STEP CALIBRATION BLOCK 2024-T3 ALUMINUM, STEP SIZES .75"x.75" FACE WITH STEP THICKNESSES OF .040",.060",.080",.100" +/-.001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1030/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 9.5mm long +/- 0.95 )x ( 0.13mm deep +/- 0.01 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1031/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Midwall EDM notch( 1.5mm long +/- 0.15 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/10MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 10mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/12MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 12mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/6MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 6mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1032/8MM | CUSTOM EDDY CURRENT CALIBRATION BLOCK 4130 or 4340 STEEL. 50mm x 50mm x 15mm with 8mm diameter hole. Corner EDM notch( 0.76mm long +/- 0.07 )x ( 0.76mm deep +/- 0.07 ) x ( 0.18mm MAX width ). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1060 | NON-PIPING CALIBRATION BLOCK, 3/4 X 6 1/4 X 12. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1062 | NON-PIPING CALIBRATION BLOCK FIGURE T-434.2.1 ASME SECTION V Article IV, 3" X 6 1/4" X 12". MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1076AL | ALUMINUM CALIBRATION BLOCK 0.020"-0.100" | 1 | |
| AFNDT-1076TI | TITANUM CALIBRATION BLOCK 0.020"-0.100 | 1 | |
| AFNDT-2038AL | EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020"Lx.005"W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE. HOLE SIZES: .156"Ø and .187"Ø. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2056 | CUSTOM CALIBRATION BLOCK, THREE SURFACE NOTCHES .008" , .020" , .040" SS. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2058/7075T6 | 6 STEP CALIBRATION BLOCK, CUSTOM, .030", .040", 0.60" , 0.80", .100", .150", 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2079/2024T3 | 6 STEP CALIBRATION BLOCK, STEP SIZES .030", .100", .250", .500", .750", 1.0" in 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2085/7075-T6 | 6 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(500",.600",.700",.800",.900" and 1.0") +/- .001" 7075-T6 ALUMINUM . Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797... Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2086CS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .050", .075", .100", .125" ±.001, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2086SS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .050", .075", .100", .125" ±.001, 3/4" X 3/4" PAD SIZE. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2087/CS | 5 STEP CALIBRATION BLOCK, .100, .200, .300, .400, .500, ± .001, 3/4X3/4 FACE, CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2087/SS | 5 STEP CALIBRATION BLOCK, .100, .200, .300, .400, .500, ± .001, 3/4X3/4 FACE, STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/2024-T3 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/304SS | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 304 Stainless Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/6AL-4V | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088CS | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 4340 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/AL | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 2024-T3. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/MAG | 5 STEP CALIBRATION BLOCK, STEP THICKNESSES: .050, .100, .150 , .200, .250. STEP PAD SIZE: 1.0" x 1.0", MATERIAL: MAGNASESIUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/S | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 4340 STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/SS | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 300 STAINLESS STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2091/TI | 6 STEP CALIBRATION BLOCK, CUSTOM, .040, .080, .160 , .250, .300, .400, 6AL-4V. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2093/7075-T6 | 5 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(1.100", 1.200", 1.300", 1.400", 1.500" ) +/- .001" 7075-T6 ALUMINUM. Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797 | 1 | |
| AFNDT-2098/7175 | ALUMINUM CALIBRATION BLOCK 2.5MM-12.5MM | 1 | |
| AFNDT-2103AL | METRIC 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. PAD SIZE: 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2103CS | METRIC 5 STEP CALIBRATION BLOCK, 1018 CARBON STEEL. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2103SS | METRIC 5 STEP CALIBRATION BLOCK, 304 STAINLESS STEEL. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2129CS | LEONDRO CALIBRATION BLOCK PAGE 18 FIGURE 3 S.B. N°169-165. 2 STEP BLOCK, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 2-3mm and 10-11mm. ±.0.1mm, PAD SIZE: 20mm X 20mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2160/19MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 270mm x 150mm x 19mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2160/38MM | Custom ASME ultrasonic phased array PAUT Calibration Block per customer supplied drawing. 330mm x 150mm x 38mm. Material: 1018 Carbon Steel. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3010/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3039 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-304AWSDS | DISTANCE / SENSITIVITY (DS) CALIBRATION BLOCK 304 STAINLESS STEEL AWS type DS | 1 | |
| AFNDT-3062/13-8PH | 8 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3062/15-5PH | 5 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3062/17-4PH | 5 STEP CALIBRATION BLOCK, PAD SIZE 1.0" x1.0", STEP SIZE: .250", .400", .600", .800", 1.00" +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/13-8PH | 5 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 13-8PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3063/17-4PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .020", .040", .060", .080", .100", .150, .200, .300 +/- .010" 17-4PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3067/15-5PH | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" Material: 15-5PH STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3067/6AL4V | 8 STEP CALIBRATION BLOCK, INCLUDES ACETAL(DELRIN) HOLDING BLOCK. PAD SIZE 1.0" x1.0", STEP SIZE: .015", .030", .050", .080", .120", .160, .200, .300 +/- .005" 15-5PH STAINLESS STEEL. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3106TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.035", 0.070", 0.105", 0.140", 0.175", .210" 0.250" +/- .001". STEP PAD SIZE: .75" x .75". Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3124/316L | Custom Ultrasonic Calibration Block. Material: 316L Stainless Steel. Size: 6.0" x 1.5" x 5mm Thick. EDM slot depths 0.118"(0.3mm), .0197"(0.5mm), .0394"(1.0mm), .0787"(2.0mm), .0984"(2.5mm) x .005"W +/-.001"Wide. Includes Test Report and Certificate of Co | 1 | |
| AFNDT-3124/6061 | Custom Ultrasonic Calibration Block. Material: 6061 Al. Size: 6.0" x 1.5" x 5mm Thick. EDM slot depths 0.118"(0.3mm), .0197"(0.5mm), .0394"(1.0mm), .0787"(2.0mm), .0984"(2.5mm) x .005"W +/-.001"Wide. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3175AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report a... | 1 | |
| AFNDT-3175CS | 8 Step Calibration Block, Material 1018 Steel. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report and Cer... | 1 | |
| AFNDT-3175TI | 8 Step Calibration Block, Material 6AL-4V Titanium. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report an... | 1 | |
| AFNDT-3181AL | 8 Step Calibration Block, Material 2024-T3 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 5.0mm, 7.5mm, 10mm. (Tolerance: +/-0.02mm).- Pad Size: 20mm x 20mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3187AL | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Per Airbus Procedure A 51-10-04. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3187TI | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Per Airbus Procedure A 51-10-04. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3200/321 | 7 STEP CALIBRATION BLOCK. STEP SIZES: .020", .040", .060", .080", .100", .150", and .200" +/- .010". PAD SIZE: 1.0" x 1.0", MATERIAL: 321 CRES. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3201A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 11.3mm(.445")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3201CS | 4 STEP CALIBRATION BLOCK. STEP SIZES: .250", .500", .750", 1.00" ±.002, 3/4" X 3/4" PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3202A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 14.3mm(.563")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3203A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.1mm(.594")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3204A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.9mm(.626")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3205A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.0mm(.630")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3206A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.3mm(.642")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3207A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.7mm(.657")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3208A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 17.5mm(.689")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3209A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 19.3mm(.760")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3230A | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 5/16" (.312")Ø Contains one EDM Corner Notch .050" x .050" +/- .001", and one EDM Surface Notch .750" long x .020 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Test Rep... | 1 | |
| AFNDT-3236CS | Custom Thin 4-Step Calibration Block, 1018 Carbon Steel (0.040, 0.060, 0.080 and 0.100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3236SS | Custom Thin 4-Step Calibration Block, 304 Stainless Steel (0.040, 0.060, 0.080 and 0.100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3237AL | Custom Thin 8-Step Calibration Block, 7075 Aluminum (.030, .040, .050, .060, .070, .080, .090 .100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3254AL | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameters = 2 Holes 22.23mm(.875")Ø, and 25.4mm(1.0")Ø. EDM Flaws:.030" x .030" x .005" +/- .001" Corner EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Con | 1 | |
| AFNDT-3316AL | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 3/8" (.375")Ø Contains one EDM Corner Notch .030" x .030" +/- .001", and one EDM Radius Thumbnail Notch .120" long x .030 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Tes | 1 | |
| AFNDT-3334AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3334AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3335/1018 | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 1018 Carbon Steel . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-3335/2024-T3 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 2024-T351. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and C | 1 | |
| AFNDT-3335/4340 | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 4340 Carbon Steel . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Ce | 1 | |
| AFNDT-3335/7075-T6 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 7075-T6. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3335/TI6AL-4V | Custom Metric 7 StepThickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: 6AL-4V Titanium . Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cert | 1 | |
| AFNDT-3339MAG | 4 Step Calibration Block, .25", .500", .750", 1.00". Pad Size: .750" x .750". MATERIAL: AZ21 Magnesium. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3340CS | CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 4340 CARBON STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3340SS | CUSTOM 4 STEP CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: .040",.090",.180", .250". PAD SIZE: .750" x .750", Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3406-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035" .040". MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3410AL | CUSTOM 5 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF 0.020", 0.040",0.060", .080", .100 +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3414-625 | 6 STEP CALIBRATION BLOCK, STEP SIZES .050", .100", .200", .300", .400", .500". MATERIAL: 625 Inconel. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3415 | CUSTOM 6 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3428 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. 3 EDM NOTCH SIZES: 2.0mm(.078") LONG x 0.1mm(.0039") WIDE x 0.25mm(.010") DEEP. 6.35mm(.25") LONG x 0.1mm(.0039") WIDE x 0.5mm(.019") DEEP. 1.5mm(.059") LONG x 0.1mm(.0039") WIDE x 0.76mm(. | 1 | |
| AFNDT-3429 | 6 STEP CALIBRATION BLOCK, .5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm. ± .001, 3/4X3/4 FACE, 1018 CARBON STEEL Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3437AL | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3437SS | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3452AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm, 20mm. (Tolerance: +/-0.02mm).- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3453 | Custom Calibration Block, 7050-T7 Aluminum. Hole Diameter .310 Ø Contains one EDM Corner Notch .020" x .020" +/- .002", and one EDM Surface Notch .030 deep x .015" wide +/- .002 . Block Size = 3.75" x 1.0" x .25". Includes Test Report and Certificate | 1 | |
| AFNDT-3477AL | METRIC 10 STEP ALUMINUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 2024-T3 Aluminum Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3477CS | METRIC 10 STEP CARBON STEEL CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 1018 or 4340 Carbon Steel Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conform... | 1 | |
| AFNDT-3477TI | METRIC 10 STEP TITANIUM CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 25mm X 25mm. Material: 6AL-4V Titanium Supplied with a Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3479TI | 7 STEP CALIBRATION BLOCK. MATERIAL: 6AL-4V TITANIUM. STEP THICKNESS: 0.024", 0.040", 0.060", 0.800", 0.100", .150" 0.200" +/- .001". STEP PAD SIZE: .75" x .75". Note: The first and last pad is 1.0" long. Supplied With Delrin Holding Block Includes certi | 1 | |
| AFNDT-3482AL | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .098", .197", .295", .394", .492" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3482AL-1 | 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: .020", .039", .059", .079", .098" ± .001". PAD SIZE: 1.0" x 1.0". Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483AL | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: 7075-T6 Aluminum. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3483CS | BOEING 2 STEP CALIBRATION BLOCK, PT 4 51-00-00 PAGE 6 FIGURE 2, MATERIAL: LOW CARBON STEEL SUCH AS 1018, 4130 or 4340. Step Size: 0.150" and 0.300" ±.0.002. PAD SIZE: 1.0" X 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3505/6061-T4 | METRIC 10 STEP CALIBRATION BLOCK, 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6061-T4 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3508/6061 | METRIC 5 STEP CALIBRATION BLOCK, 6061-T4 ALUMINUM. STEP SIZES: .5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm. PAD SIZE: 1.0" x 1.0". PROVIDED WITH A DELRIN HOLDER.Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3516/15-5PH | 6 STEP CALIBRATION BLOCK, MATERIAL: 15-5PH STEEL. PAD SIZE: .75" x .75". STEP SIZES: .030", .100", .200", .300", .400", .500" ± .001". Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-3523AL | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 7075-T6 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523CS | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 4340 Carbon Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523MAG | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: Magnesium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523SS | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 304 Stainless Steel. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3523TI | 4 Step Calibration Block, 1.250", 1.500", 1.750", 2.000". Tolerance= ± .002" MATERIAL: 6AL-4v Titanium. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3529AL | 4 Step Calibration Block, .750", 1.000", 1.250", 1.500". Tolerance= ± .002" MATERIAL: 2024-T3 Aluminum. Pad Size: 1.0" x 1.0" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3552TI | 5 Step calibration block (0.100", 0.250", 0.500", 0.750" and 1.000"; . Step pad size: .75” x .75”. Material: 6AL-4V Titanium. Includes Test Report and Certificate of Conformance.....Reference: B777 NTM Part4 51-00-10 | 1 | |
| AFNDT-3561AL | CUSTOM 3 STEP CALIBRATION BLOCK, 2024-T3 ALUMINUM... STEP PAD SIZE: 25.0mm x 25.0mm. STEP THICKNESSES: 0.3mm, 0.5mm and 0.8mm ± 0.03mm. Supplied with Protective Acetal Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3562/321SS | CUSTOM 3 STEP CALIBRATION BLOCK 321 Stainless, STEP SIZES .75" x .75" FACE. STEP THICKNESSES OF 0.025", 0.040" and 0.060" +/-.001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-CHOKE BLOCK-70/30 | CALIBRATION BLOCK 70/30 COPPER-NICKEL | 1 | |
| AFNDT-CHOKE BLOCK-C | CALIBRATION BLOCK 1018 CARBON STEEL | 1 | |
| AFNDT-CHOKE BLOCK-DUP | CALIBRATION BLOCK 2205 SS (DUPLEX) | 1 | |
| AFNDT-CHOKE BLOCK-S | CALIBRATION BLOCK 303 STAINLESS STEEL | 1 | |
| AFNDT-IIW-01-CASE | Form Fitted Wood Case for IIW Type 1 Calibration Block | 1 | |
| AFNDT-PR-T-2521/22 | CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AHS29 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| AL29-32 | CALIBRATION BLOCK | 6 | |
| AL35-45 | CALIBRATION BLOCK | 8 | |
| ANDT 1015 | Calibration Block | 3 | |
| ANDT 1049 | Calibration Block | 3 | |
| ANDT 1057 | Calibration Block | 3 | |
| ANDT 1077 | Calibration Block | 4 | |
| ANDT 3006 | Calibration Block | 3 | |
| ANDT1015 | CALIBRATION BLOCK | 3 | |
| ANDT1053 | CALIBRATION BLOCK | 5 | |
| ANDT1057 | CALIBRATION BLOCK | 3 | |
| ANDT1081 | CALIBRATION BLOCK (0.056"-0.067") | 2 | |
| ANDT3004 | Calibration Block | 3 | |
| ANDT3016-B | Calibration Block | 4 | |
| ANDT3019 | Calibration Block | 3 | |
| ANDT4126 | Calibration Block | 2 | |
| ASE-WSNDT | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| ASTM B193 | CALIBRATION BLOCK | 1 | |
| AT575-343W | CALIBRATION BLOCK | 1 | |
| AW-05384 | ATR STEPWEDGE CALIBRATION BLOCK | 1 | |
| BH7475 – T7351 | EDDY CURRENT ROTO CALIBRATION TEST BLOCK | 4 | |
| C-130-OW-016 | CALIBRATION STANDARD BLOCK | 2 | |
| C12-DEL-3C1N | CALIBRATION BLOCK | 3 | |
| C12-DIS-3C1N | CALIBRATION BLOCK | 3 | |
| C12-PCS-3C1N | CALIBRATION BLOCK | 3 | |
| C12-POT-3C1N | CALIBRATION BLOCK | 3 | |
| C12DIS3C1N | CALIBRATION BLOCK | 3 | |
| C12P0D3C1N | CALIBRATION BLOCK | 1 | |
| C12PCS3C1N | CALIBRATION BLOCK | 3 | |
| CALBLK-STD-105 | V2/A4-20MM-Ø1.5MM CALIBRATION BLOCK | 1 | |
| CALBLK2.125 | BLOCK, CALIBRATION | 1 | |
| CALIBRATION BLOCK 4.4 MS/M | CALIBRATION BLOCK SET FOR SB 53-1298 | 1 | |
| CALIBRATION BLOCK 58.5 MS/M | CALIBRATION BLOCK SET FOR SB 53-1298 | 1 | |
| CB-LM-510113 | CALIBRATION BLOCK | 1 | |
| CB-LM-510115 | CALIBRATION BLOCK | 1 | |
| CB-LM-510116-B | CALIBRATION BLOCK LFEC-5.0 MM | 1 | |
| CB-LM-510132-1 | CALIBRATION BLOCK | 1 | |
| CB-LM-532048 | CALIBRATION BLOCK | 2 | |
| CB-LM-552101 | CALIBRATION BLOCK | 1 | |
| CFM56 9970 | CALIBRATION BLOCK | 1 | |
| CFM56 9970-958-579 | CALIBRATION BLOCK | 2 | |
| CI3550 | DRY BLOCK TESTER JET CAL TEST | 1 | |
| CRS 1 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.020", 0.040", 0.060", 0.100", 0.150", 0.200" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS 2 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.100", 0.250", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS AL2024 | 5 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.200", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T351 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| DRT74469 | BLOCK CALIBRATION | 2 | |
| DRT94869 | CALIBRATION BLOCK | 1 | |
| DRT95406 | CALIBRATION BLOCK | 1 | |
| DRT95819 | Calibration Block | 1 | |
| DRT96170 | CALIBRATION BLOCK | 1 | |
| E53-002 | CALIBRATION BLOCK SET EMBRAER | 1 | |
| E53-002C | CALIBRATION BLOCK SET, ALUMINUM 2024-T3, DIMENSION 160 X 135 MM FOR FUSELAGE SINGLE DOUBLER REPAIR’ | 1 | |
| E53-003 | CALIBRATION BLOCK SET | 1 | |
| E53-003A | CALIBRATION BLOCK SET | 2 | |
| E53-003F | CALIBRATION BLOCK SET | 2 | |
| E53-004 | CALIBRATION BLOCK | 2 | |
| E53‐005 | CALIBRATION BLOCK | 1 | |
| E53‐006 | CALIBRATION BLOCK DIMENSIONS 95 X 90 MM, WITH 03 ALUMINUM PLATES, EDM NOTCH 10.6 MM | 1 | |
| E54‐004 | CALIBRATION BLOCK MADE FROM TITANIUM ALLOY AND ALUMINUM ALLOY AL 7075 T351 | 1 | |
| E55‐001 | CALIBRATION BLOCK | 1 | |
| E55‐002 | CALIBRATION BLOCK | 1 | |
| E56-001 | CALIBRATION BLOCK - PERSPEX WITH 5 STEPS | 1 | |
| E57‐009 | CALIBRATION BLOCK, ALUMINUM ALLOY WITH EDM NOTCHES | 1 | |
| E57‐010 | CALIBRATION BLOCK, ALUMINUM ALLOY WITH EDM NOTCHES | 1 | |
| EC-NO-TQ002001 | NDT CALIBRATION BLOCK | 1 | |
| EMB-E54-003 | CALIBRATION BLOCK ALUMINUM 7050-T7452 | 1 | |
| EN 12223 | NDE TECH CALIBRATION BLOCK NO.1 K1 ALUMINUM EN12223 (IIW REF BLOCK) | 1 | |
| EN 27963 | V2 CALIBRATION BLOCK | 1 | |
| EN27963 | CALİBRATION BLOCK (K2) | 1 | |
| EXBD400-50013-011 | NDT CALIBRATION BLOCK | 1 | |
| EXBD400-50093-005 | CALIBRATION BLOCK | 1 | |
| EXBD400-51325-101 | CALIBRATION BLOCK | 2 | |
| EXGD922-0123-1 | CALIBRATION BLOCK | 1 | |
| EXGM922-5001-23 | CALIBRATION BLOCK | 1 | |
| EXGM922-5004-1 | CALIBRATION BLOCK | 1 | |
| F20.0700 | CAL. BLOCK V1/A2 TO BS 2400 CASE & CERT. | 1 | |
| F20.0701 | CAL. BLOCK V1/50-A2 BS2704 CASE & CERT. | 1 | |
| F20.0702 | CAL. BLOCK V1/A2 BS-EN12223 CASE & CERT. | 1 | |
| F80049-12 | LOCK ASSEMBLY - FLIGHT CONTROLS (HYDRAULIC MODULE ELECTRICAL CONTROL BLOCKING TOOL) (THE BOEING COMPANY) | 8 | |
| F80049-2 | LOCK ASSEMBLY - FLIGHT CONTROLS (FLAP BY-PASS VALVE AND HYDRAULIC INTERCONNECT ELECTRICAL CONTROL BLOCKING TOOL)(AFT) (S (THE BOEING COMPANY) | 5 | |
| GSE 503 | CALIBRATION BLOCK | 1 | |
| HU81900 | CALIBRATION BLOCK | 1 | |
| IAE2P16675 | Calibration Block | 1 | |
| IAE2P18879 | CALIBRATION BLOCK | 1 | |
| IAE2R18939 | CALIBRATION BLOCK | 1 | |
| IAE2R19426 | TEST BLOCK- CALIBRATION | 2 | |
| IAE2R19426B | Calibration Block | 1 | |
| IIW TYPE 2 | CALIBRATION REFERENCE STANDARD BLOCK, ALUMINUM. (GE OR EQUIVALENT) | 1 | |
| IIW-TYPE 2 | CALIBRATION BLOCK | 1 | |
| IIW2.IA | IIW TYPE 2 CALIBRATION BLOCK - 7075-T6 ALUMINIUM ALTPN - IIW-2 AL | 1 | |
| IIWTYPE1 | CALIBRATION BLOCK | 1 | |
| J27017-5 | CALIBRATION BLOCK | 1 | |
| J27017-6 | CALIBRATION BLOCK | 1 | |
| J27020-10 | Calibration block | 1 | |
| J27020-9 | Calibration block | 1 | |
| K1 | CALIBRATION BLOCK | 4 | |
| K2 | STANDARD UT CALIBRATION BLOCK | 8 | |
| LWJWG | BLOCK BLOCK, CALIBRATION | 1 | |
| MAB Block-S | CALIBRATION BLOCKS | 1 | |
| MAT/ULT/183 | MAT/ULT/TP183 - BLOCK, CALIBRATION TEST | 2 | |
| MAT/ULT/TP183 | BLOCK, CALIBRATION TEST | 1 | |
| MATULT183 | MAT/ULT/TP183 - BLOCK, CALIBRATION TEST | 2 | |
| MBBBT100 | ELCH ELASTICITY LAMINATE CHECKER (WITH CALIBRATION BLOCK FS1). | 3 | |
| MD80-53-303 | Calibration Block | 1 | |
| MHS-29-1A-0 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| MHS‐29‐1A‐0 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| MP90 /1-3M | CALIBRATION BLOCK | 1 | |
| NDE FLAW TECH-STEP WEDGE-1544 | STEP WEDGE CALIBRATION BLOCK ALUMINUM | 1 | |
| NDE/01715 | 10 STEP THICKNESS CALIBRATION BLOCK ALUMINUM 1- 10MM METRIC | 1 | |
| NDETECH-7347 | CALIBRATION BLOCK ALUMINIUM 5 STEP THICKNESS GAUGE BLOCK INCH ALUMINUM. | 1 | |
| NDETECH-7349 | CALIBRATION BLOCK STEEL 1016 5 STEP THICKNESS GAUGE BLOCK INCH ALLOY STEEL. | 1 | |
| NDETECH-7515 | CALIBRATION BLOCK STAINLESS STEEL SURFACE REFERENCE STANDARD 304 STAINLESS STEEL. | 1 | |
| NDETECH-7614 | CALIBRATION BLOCK TITANIUM 5 STEP WEDGE 6AL-4V TITANIUM. | 1 | |
| NDT 1022 | Calibration Block | 3 | |
| NDT 1023 | Calibration Block | 2 | |
| NDT 1024 | Calibration Block | 2 | |
| NDT 1025 | Calibration Block | 2 | |
| NDT 1026 | Calibration Block | 2 | |
| NDT 1027 | Calibration Block | 2 | |
| NDT 1087-1..4 | Calibration Block | 3 | |
| NDT 1087-14 | CALIBRATION BLOCK | 3 | |
| NDT 1088 | Calibration Block | 1 | |
| NDT 1094-XXX-A | Calibration Block | 1 | |
| NDT 1095 | Calibration Block | 2 | |
| NDT 1099 | Calibration Block | 4 | |
| NDT 3038 | Calibration Block | 4 | |
| NDT 3092 | Calibration Block | 2 | |
| NDT 369 | CALIBRATION BLOCK | 2 | |
| NDT 512 | Calibration Block | 1 | |
| NDT 514 | Calibration Block | 1 | |
| NDT 515 | Calibration Block | 2 | |
| NDT 516 | Calibration Block | 1 | |
| NDT 519 | Calibration Block | 1 | |
| NDT 527 | Calibration Block | 1 | |
| NDT 537 | Calibration Block | 2 | |
| NDT 546 | Calibration Block | 1 | |
| NDT-3014TI | TI CALIBRATION BLOCK 8 STEPS(1-8MM) | 1 | |
| NDT-396 | CALIBRATION BLOCK | 6 | |
| NDT1016 | Calibration Block | 3 | |
| NDT1017 | Calibration Block | 2 | |
| NDT1018 | Calibration Block | 3 | |
| NDT1019 | Calibration Block | 3 | |
| NDT1020 | Calibration Block | 2 | |
| NDT1021 | Calibration Block | 2 | |
| NDT1022 | CALIBRATION BLOCK | 3 | |
| NDT1039-t1 | Calibration Block | 1 | |
| NDT1039-t2 | Calibration Block | 1 | |
| NDT1048 | CALIBRATION BLOCK | 4 | |
| NDT1084 | Calibration Block | 1 | |
| NDT1084-1 | Calibration Block | 1 | |
| NDT1084-2 | Calibration Block | 1 | |
| NDT1084-3 | Calibration Block | 1 | |
| NDT1085-032 | CALIBER BLOCK | 3 | |
| NDT1085-063 | CALIBER BLOCK | 2 | |
| NDT1085-071 | CALIBER BLOCK | 2 | |
| NDT1085-112 | CALIBER BLOCK | 2 | |
| NDT1085-125 | CALIBER BLOCK | 2 | |
| NDT1086-050 | Calibration Block | 3 | |
| NDT1087-1 | CALIBRATION BLOCK | 4 | |
| NDT1087-2 | CALIBRATION BLOCK | 3 | |
| NDT1087-3 | CALIBRATION BLOCK | 3 | |
| NDT1087-4 | CALIBRATION BLOCK | 3 | |
| NDT1087-8 | LFEC EDDY CURRENT CALIBRATION BLOCK | 2 | |
| NDT1096-050 | Calibration Block | 1 | |
| NDT1096-070 | Calibration Block | 1 | |
| NDT1106 | CALIBRATION BLOCK | 2 | |
| NDT194B | CALIBRATION BLOCK | 2 | |
| NDT3001 | Calibration Block | 2 | |
| NDT3004 | BLOCK CALIBRATION | 3 | |
| NDT3012 | Calibration Block | 1 | |
| NDT3021 | Calibration Block | 6 | |
| NDT3023 | Calibration Block | 4 | |
| NDT3024A | Calibration Block | 2 | |
| NDT3038-P1 | Calibration Block | 3 | |
| NDT3049 | Calibration Block | 2 | |
| NDT3050 | Calibration Block | 4 | |
| NDT3055B | CALIBRATION BLOCK | 2 | |
| NDT3065-STL | Calibration Block | 2 | |
| NDT3068 | Calibration Block | 5 | |
| NDT3118 | Calibration Block | 3 | |
| NDT3141 | CALIBRATION BLOCK | 2 | |
| NDT3141G1 | CALIBRATION BLOCK | 2 | |
| NDT3152-A | Calibration Block | 3 | |
| NDT3166-006 | CALIBRATION BLOCK | 4 | |
| NDT3170 | Calibration Block | 5 | |
| NDT3171 | Calibration Block | 5 | |
| NDT3249 | CALIBRATION BLOCK | 1 | |
| NDT3250 | CALIBRATION BLOCK | 1 | |
| NDT3301A | CALIBRATION BLOCK | 1 | |
| NDT3302 | CALIBRATION BLOCK | 1 | |
| NDT3312 | CALIBRATION BLOCK | 2 | |
| NDT369 | Calibration Block | 2 | |
| NDT392 | Calibration Block | 1 | |
| NDT396 | Calibration Block | 6 | |
| NDT4126A | CALIBRATION BLOCK | 1 | |
| NDT5097-A | CALIBRATION BLOCK | 2 | |
| NDT5097-D | CALIBRATION BLOCK | 1 | |
| NDT514 | Calibration Block | 1 | |
| NDT528 | Calibration Block | 1 | |
| NDT531 | Calibration Block | 1 | |
| NDT542 | Calibration Block | 1 | |
| NDT555 | Calibration Block | 1 | |
| NDT562 | Calibration Block | 1 | |
| NDT575 | Calibration Block | 1 | |
| NDT578 | Calibration Block | 1 | |
| NDT7005 | CALIBRATION BLOCK | 2 | |
| NDT7020 | CALIBRATION BLOCK | 1 | |
| NDT7031A | CALIBRATION BLOCK | 2 | |
| NDT7031B | CALIBRATION BLOCK | 2 | |
| NDT753 | CALIBRATION BLOCK P/N: NDT753 | 2 | |
| NDT757A | CALIBRATION BLOCK | 1 | |
| NEC8139 | CALIBRATION BLOCK | 1 | |
| P54-07-1 | SPLIT CALIBRATION BLOCK | 1 | |
| PDL 457A | CALIBRATION BLOCK PDL 457A | 1 | |
| PDL 917 | CALIBRATION BLOCK | 2 | |
| PDL 944-2 | CALIBRATION BLOCK PDL 944-2 | 1 | |
| PH13-8M0 | CALIBRATION REF. STANDARD, BLOCK, PH13-8 MO STEEL ALLOY, CONTAINS 0.008 IN(0.20 MM) 0.020 IN(0.51 MM) 0.040 IN(1.02 MM) DEEP ELEC DISCHARGE MACMACHINED NOTCHES | 1 | |
| PNPGT68 | ANGLE BEAM CALIBRATION BLOCK | 1 | |
| PWA212380 | Calibration Block | 1 | |
| PWA28403 | PRATT & WHITTNEY 1ST STAGE FAN BLADE CALIBRATION STANDARD WITH HOLDING BLOCK . Includes Test Report and Certificate of Conformance. | 4 | |
| QC6755 | CALIBRATION BLOCK 1 | 1 | |
| QC6772 | ULTRASONIC CALIBRATION BLOCK | 1 | |
| QC6852 | CALIBRATION BLOCK | 1 | |
| QC6854 | CALIBRATION BLOCK | 1 | |
| RC-5S1018 | ALUMINUM STEP CALIBRATION BLOCK | 1 | |
| RS0212-1 | CALIBRATION BLOCK | 1 | |
| RS0824-2024T3 | CALIBRATION BLOCK | 2 | |
| RSMVS12-15 | CALIBRATION BLOCK SHAFT-ADJUSTABLE MINI ROTATING PROBE | 1 | |
| RT10-2024T3 | CALIBRATION BLOCK | 1 | |
| RT10-20MM-2024T3-.6/5MM | METRIC 10 STEP CALIBRATION BLOCK 2024-T3 AL | 1 | |
| RT5.75-6AL4V-.030/.375 | CALIBRATION BLOCK TITANIUM 5 STEP WEDGE 6AL-4V TITANIUM. | 1 | |
| RT5_75-1018-2_5/12_5MM | THICKNESS CALIBRATION BLOCKS | 1 | |
| RT5_75-7075T6-_25/1_25 | THICKNESS CALIBRATION BLOCKS | 1 | |
| RT6-7075T6-015-040 | THIN CALIBRATION BLOCK | 1 | |
| RT8-2024-.028/.095 | UT THICKNESS CALIBRATION BLOCK | 1 | |
| RT8-2024T3-.028/.095 | UT THICKNESS CALIBRATION BLOCK | 1 | |
| RT8-2024T3-028095 | ULTRASONIC CALIBRATION BLOCK | 1 | |
| SB 57-3329 FIG.9 | Raytheon 12 Hole Standard Calibration Block Figure 9 Page 20, Service Bulletin SB 57-3329. Hole sizes 9/64, 11/64,3/16 and 13/64. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SCT-TB1 | TEST BLOCK - SAFETY CABLE INSTALLER CALIBRATION | 5 | |
| SK601-10021 | CALIBRATION REFERENCE BLOCK SET (TAIL SECTION / HORIZONTAL STABILIZER) - SK601-10021 SERIES (BLOCKS 1 - 5) | 1 | |
| SK601R−10043 | Calibration reference standard block (Bombardier Inc.) | 1 | |
| SRS0824A | CALIBRATION BLOCK | 3 | |
| SSINO54-10-03 | CALIB STANDARD BLOCK (TI) | 1 | |
| ST4340 | CALIBRATION REFERENCE STANDARD BLOCK - MADE FROM 4340 STEEL, MIL-S-5000, CONTAINS 0.008 IN. (0.20 MM), 0.020 IN. (0.51 MM), AND 0.040 IN (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED NOTCHES, (MHIRJ OR COMMERCIALLY AVAILABLE). | 5 | |
| ST8870-1 | CALIBRATION BLOCK | 4 | |
| ST8870-4 | CALIBRATION BLOCK | 4 | |
| ST8870-7 | CALIBRATION BLOCK | 4 | |
| ST8870-8 | CALIBRATION BLOCK | 5 | |
| ST8870-9 | CALIBRATION BLOCK | 4 | |
| ST8870B-7 | CALIBRATION BLOCK | 3 | |
| ST8870B-8 | CALIBRATION BLOCK | 3 | |
| ST8870B-9 | CALIBRATION BLOCK | 3 | |
| ST8870C-7 | CALIBRATION BLOCK | 2 | |
| ST8870C-8 | CALIBRATION BLOCK | 2 | |
| ST8870C-9 | CALIBRATION BLOCK | 2 | |
| ST8871 | CALIBRATION BLOCK | 4 | |
| STD-1474 | CALIBRATION / REFERENCE BLOCK | 1 | |
| SWREF1 | CALIBRATION BLOCK | 2 | |
| SWREF2 | BLOCK CALIBRATION BLOCK | 1 | |
| SWREF3 | BLOCK CALIBRATION BLOCK | 1 | |
| TB1065-1 | CALIBRATION BLOCKS | 1 | |
| TB1065-4 | CALIBRATION BLOCK | 1 | |
| TB5939-1 | IIW-2 CALIBRATION BLOCK 1018 STEEL | 1 | |
| TB5939-1 IIW-2 | CALIBRATION BLOCK 1018 STEEL | 1 | |
| TB5939-2 | CALIBRATION BLOCK | 1 | |
| TB5939-4 | IIW-2 CALIBRATION BLOCK 7075 ALUMINUM | 1 | |
| TB5939-4 IIW-2 | CALIBRATION BLOCK 7075 ALUMINUM | 1 | |
| TB7150-1 | BEAM CALIBRATION BLOCK | 1 | |
| TB7150-4 | V2 CALIBRATION BLOCK | 1 | |
| TM405555FG | 4.0MM STEREO MEASUREMENT FORWARD VIEWING INTERCHANGEABLE OPTICAL TIP COLOR: BLACK FOV: 55/55 DEGREES DOF: 5MM TO INF. (0.2" TO INF.) DOV: 0 DEGREES INCLUDES VERIFICATION BLOCK (VER2400C) REQUIRES CALIBRATION REQUIRES STEREO MEASUREMENT SOFTWARE, SOLD SEPA | 2 | |
| TP11 | CALIBRATION BLOCK | 1 | |
| TP54 | Split Calibration block-AL, A318/A319/A320/A321 51-10-01-PB6 PG 10 FG 51-10-01-991-005-A SHEET 01, A300-600 PT6 51-63-08 PG 601 FG 601, | 2 | |
| TP54-02-01 | CALIBRATION BLOCK | 2 | |
| TP54-02-1 | SPLIT PARALLEL CALIBRATION BLOCK | 2 | |
| TP54-07-1 | Split Calibration block- Ti | 2 | |
| TP54-10-01 | CALIBRATION BLOCK | 1 | |
| TP54-10-1 | SPLIT CALIBRATION BLOCK-AL, 15MM-28MM HOLES, A318/A319/A320/A321 NTM 51-63-07, 7075-T6 | 1 | |
| TQ002001 | CALIBRATION BLOCK | 2 | |
| TQ00201 | CALIBRATION BLOCK | 1 | |
| TYSCCS21-28 | CALIBRATION BLOCK FOR ALUMINUM | 1 | |
| U8860182 | Calibration block 99A51107300000 (NDT) | 1 | |
| U8860212 | Calibration block 99A53307274000 (NDT) | 1 | |
| U8880016 | CALIBRATOR, TEST BLOCK 2214M TEST BLOCK. 5-STEP. 1018 CARBON STEEL. METRIC UNIT 2.5 MM, 5.0 MM, 7.5 MM, 10.0 MM, 12.5 MM PRECISION THICKNESS | 1 | |
| ULTRASONIC CALIBRATION BLOCK (2 STEP 2-3 MM | ULTRASONIC CALIBRATION BLOCK (2 STEP 2-3 MM | 1 | |
| UT-2370 | CAL. BLOCK DOVETAIL | 1 | |
| UT-PHT-CALBLK1.WC | WOOD CASE FOR CALIBRATION BLOCK NO. 1 (K1) | 1 | |
| UT-RC-551018-MA | 5 STEP CALIBRATION BLOCK (UT) METRIC 5A(2.5, 5.0, 7.5, 10.0 & 12.5MM) MATERIAL: 1018 CARBON STEEL | 1 | |
| UT-RC-5S-CAL | 5-STEP CALIBRATION BLOCK, DIMENSIONAL CALIBRATION AND SERIALIZATION | 1 | |
| UT-RC-5S-CASE | 5 -STEP CALIBRATION BLOCK, WOOD CASE FOR STANDARD INCH VERSION, CUSTOM INCH VERSION C2 AND METRIC A | 1 | |
| UT-RC-5S7075-C1 | 5-STEP CALIBRATION BLOCK, 7075 ALUMINUM | 1 | |
| UT-RC-5STITANIUM | 5-STEP CALIBRATION BLOCK, TITANIUM | 1 | |
| UT2009 | CALIBRATION TEST BLOCK | 1 | |
| V-2 | BLOCK 2, CALIBRATION | 2 | |
| V1 | BLOCK 1, CALIBRATION | 3 | |
| V1 ALUMINUM STANDARD | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| V1-EN-12223 | CALIBRATION BLOCK | 1 | |
| V1-IIW | ANGLE BEAM CALIBRATION BLOCK | 1 | |
| V1-IIW-CS | V-1 (A-2) IIW Angle Beam Calibration Block (Metric). Made to British Standard: BS-2704, German Standard: DIN 54-120, Australian Standard AS 2803 and ISO 2400. Material: A36/1018 Carbon Steel. Thickness of 1" / 25 mm, Height of 4" / 100 mm for straight bea | 1 | |
| V2 | BLOCK 2, CALIBRATION | 2 | |
| V2(K2) | CALIBRATION BLOCK | 1 | |
| V2-K2 | CALIBRATION BLOCK | 1 | |
| V2A4.12.5.CS | BLOCK 2, CALIBRATION | 1 | |
| WT-140818 | ELECTRICAL TEST BLOCK | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
