| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10-320-0126 | CABLE TACH | 4 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) SCTR323 | SAFE T-CABLE TOOL WITH 3" NOSE ATTACHED(.032) (CALIBRATION) | 1 | |
| 10-320-0126 | CABLE TACH GENERIC 50 FT | 4 | |
| 10-320-0153 | CABLE TACH GENERIC 25' - ACES | 2 | |
| 1007-30 | DSS Cable Set, Accelerometer & PhotoTach, 30 MicroVib II | 1 | |
| 1097-30 | CABLE ASSY, PHOTO-TACH, 30” | 1 | |
| 1097-50 | CABLE ASSY, PHOTO-TACH, 50” | 1 | |
| 1131 | CABLE ASSY, BREAK-OUT, ACCELEROMETER AND PHOTO-TACH | 1 | |
| 6100-S-RA-BNC | General Purpose 1/8" diam, 1/2" drop, RA, Potted Cable to BNC, 6' TPEN95-6 W/BNC Cable attached | 1 | |
| 9610064660 | TACHOMETER CABLE | 1 | |
| 98A57604005022 | SHACKLE CABLE ATTACHMENT | 1 | |
| AF-4054/BR | LOW FREQUENCY REFLECTION PROBE, REFLECTION, 1-5KHZ, .186OD, ATTACHED CABLE BURNDY CONNECTOR 6 FEET LONG | 1 | |
| AF-4068/16L | LOW FREQUENCY REFLECTION RING PROBE, 500Hz-5KHz, 16 PIN LEMO CABLE ATTACHED 6 FT LONG | 1 | |
| AF-5090 | LF PROBE BUCKED TAIL DIFF 2 -7KHZ 2 FT CABLE ATTACHED TRIAX FISCHER CONNECTOR WITH HANDLE( CLINCHED RIVET PROBE) | 1 | |
| AF-5092 | ENCIRCLING PROBE ID 10 MM CABLE ATTACHED 6 FT LONG 16 PIN FOR NOR TEC INSTRUMENT DIFERENTIAL 800 KHZ-2MHZ FOR ( TI TUBING). Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5227-1 | CUSTOM BOBBIN PROBE, 100-500KHz, DIFFERENTIAL, .425"Ø 1.6" LONG WITH A 1 METER LONG HARDWIRED CABLE ATTACHED TO A TRIAX FISCHER CONNECTOR. Used to inspect brass tubing I.D.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5292 | ABSOLUTE SHIELDED STRAIGHT PENCIL PROBE, .25"Ø (6.35mm)Ø with a Tip diameter of .180"Ø attached to a 6 foot cable with adjustable collar. Nortec 8 pin Burndy connector 2-4MHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5293 | ABSOLUTE UNSHIELDED STRAIGHT PENCIL PROBE, .25"Ø (6.35mm)Ø with a Tip diameter of .180"Ø attached to a 6 foot cable with adjustable collar. Nortec 8 pin Burndy connector 500KHz-1MHz.. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-8000 | PRATT & WHITTNEY ENGINE BLADE PROBE WITH ATTACHED CABLE 6.0' FT LONG WITH 16PIN LEMO CONNECTOR , DIFFERENTIAL 1-4 MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-8001/BNC | PRATT & WHITTNEY ENGINE BLADE PROBE, DIFFERENTIAL 1-4 MHz, ATTACHED CABLE 6.0' FEET LONG WITH A BNC CONNECTOR FOR ROHMANN M2/M3 SERIES INSTRUMENTS, NO BALANCE LOAD,PARAMETRIC OPERATION. DIFFERENTIAL 1-4 MHz. Includes Test Report and Certificate of C... | 1 | |
| APN-925-8/N16 | SURFACE PROBE 90 DEG .250 DROP 50-500KHZ, WITH 16 PIN LEMO CONNECTOR, CABLE ATTACHED' 6 FT | 1 | |
| APN-925-8FX /N16 | BENDABLE SURFACE PROBE 90 DEG .250" DROP 8.0"LONG WITH 16 PIN LEMO CABLE ATTACHED 50-500KHZ | 1 | |
| ARP-.250/1.1-500HZ-5K | Handheld Detachable Probe w/o Cable; Model: RNG = Detachable Ring Probe with Reflection (Driver Pick-up Coils) ; Item Diameter: 0.250in (6.4mm); Tube ID: ; Coil: #= Special; Poly Type: None; Length: No cable; Connector: 1 Pin Female Triaxial Connecto... | 1 | |
| F80006-52 | HORIZONTAL STABILIZER HOISTING SLING (THE -58 CABLE IS USED TO REMOVE OR INSTALL THE STABILIZER WITHOUT THE ELEVATOR ATTACHED. THE -56 CABLE IS USED TO REMOVE OR INSTALL THE STABILIZER WITH THE ELEVATOR ATTACHED.) | 10 | |
| F80006-54 | HORIZONTAL STABILIZER HOISTING SLING (THE -58 CABLE IS USED TO REMOVEINSTALL THE STABILIZER WITHOUT THE ELEVATOR ATTACHED. THE -56 CABLE IS USED TO REMOVEINSTALL THE STABILIZER WITH THE ELEVATOR ATTACHED.) | 8 | |
| G71003-124 | CABLE ASSY ATTACH ASSY | 1 | |
| HC132H0033-000 | ATTACHMENT FRONT CABLE | 1 | |
| HC132H0034-000 | REAR CABLE ATTACHMENT | 5 | |
| J36020-77 | Cable attach clevis | 1 | |
| K26001-14 | ATTACH CABLE ASSY | 1 | |
| MHF.437/2.75WL-MIZ6 | Manual Hole Probe 50-500KHz coil as near to the tip as possible .437 (7/16) 70mm- 2.75WL Triax to MIZ21 6ft cable attached | 1 | |
| MHF.500/2.75WL-MIZ6 | Manual Hole Probe 50-500KHz coil as near to the tip as possible .500 (1/2) 70mm- 2.75WL Triax to MIZ21 6ft cable attached | 1 | |
| MHF.687/2.75WL-MIZ6 | Manual Hole Probe 50-500KHz coil as near to the tip as possible .687 (11/16) 70mm- 2.75WL Triax to MIZ21 6ft cable attached | 1 | |
| OHME65B00115-2 | ATTACHMENT CABLE | 1 | |
| PWA75909 | ENGINE BLADE PROBE, DIFFERENTIAL 1-4 MHz, ATTACHED CABLE 6.0' FEET LONG WITH 16 PIN LEMO CONNECTOR FOR NOTEC SERIES INSTRUMENTS. DIFFERENTIAL 1-4 MHz. Includes Test Report and Certificate of Conformance. | 3 | |
| SCTR323 | SAFETY CABLE TOOL WITH 3 INCH NOSE ATTACHED (.032) | 4 | |
| TEK-3101 | SURFACE PROBBE .65 OD 50-500KHZ CABLE ATTACHED BNC 6FT | 1 | |
| UT7101 | Cable,Attach | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
