| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 9560000050 | C RING SEAL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 2AB-7852-2514, SEALING RING | SEALING RING (CALIBRATION) | 1 | |
| (CALIB) 6799622 | PULLER, REAR TURBINE BEARING AND SEAL (CALIBRATION) | 1 | |
| 01472 | SEAL KIT FOR J-AXLE12HPA (CONTAINING: SPRING, VALVE AND BALL) | 1 | |
| 0U145414 | RING-SHRINKING SEAL & BACKUP | 10 | |
| 10C1096P01 | PROTECTOR - NO. 4 BEARING OIL SEAL (BEARING OIL SEAL PROTECTOR) | 1 | |
| 1100 | TOOL - REM / INST OF SEAL RETAINING RINGS ( WITH TIPS) “1100 PLIERS INCLUDED | 6 | |
| 11C3381 | GUIDE-CARBON SEAL - NO. 1 BEARING | 1 | |
| 11C3474 | GUIDE - INSTALLTION NO 5 BEARING CARBON SEAL | 1 | |
| 11C3505 | PULLER - NO. 5 BEARING INNER RACE/SEAL | 1 | |
| 11C3989G01 | KIT-R/I CARBONE SEAL & MATING RING (ALT SPL-9648) | 1 | |
| 11C3989G02 | Carbon Seal & Mating Ring R/I Kit | 2 | |
| 11C3990G01 | SPL-12371 - DRIVE PAD CARBON SEAL & MATING RING KIT | 1 | |
| 11C3990G02 | DRIVE PAD CARBON SEAL & MATING RING KIT | 1 | |
| 11C3991G01 | SPL-12372 - EDP & FUEL PUMP CARBON SEAL & MATING RING KIT | 1 | |
| 11C3991G02 | EDP & FUEL PUMP CARBON SEAL & MATING RING KIT | 1 | |
| 11C3992 | TOOL SET, CARBON SEAL & MATING RING AGB (ENGLISH) | 1 | |
| 11C3992G01 | SPL-12373 - IDG CARBON SEAL & MATING RING KIT | 1 | |
| 11C3992G02 | IDG CARBON SEAL & MATING RING KIT | 1 | |
| 11C3995 | CARBON SEAL & MATING RING KIT | 1 | |
| 11C3995G01 | CARBON SEAL & MATING RING KIT 747-8F | 1 | |
| 11C3995G01 | SPL-11510 - CARBON SEAL & MATING RING KIT | 1 | |
| 11C3995G02 | SPL-11510 - CARBON SEAL & MATING RING KIT | 1 | |
| 11C4122G02 | NO. 3 BEARING CARBON SEAL FLOW CHECK TOOL | 1 | |
| 11C4623 | FIXTURE - CLAMP-STG 10 OGV SEALING RING | 1 | |
| 1600-K-239 | 14"/16" Seal Ring Core Machine | 1 | |
| 18D10647 | ACCESSORY GEARBOX PULLER SEAL MATING RING | 1 | |
| 1C5691 | PULLER - NO. 6R BEARING INNER RACE AND SEAL | 1 | |
| 1C5691G04 | Puller, No. 6R Bearing Inner Race and Rotating Oil Seal | 1 | |
| 1C5702 | PUSHER- NO 6 BEARING AND SEAL RACE | 1 | |
| 1C5702G01 | PUSHER, NO. 6R BEARING AND SEAL RACE | 1 | |
| 1C6801 | PULLER, ROTATING SEALS & BEARING RACES-AFT SHAFT | 1 | |
| 1C9150 | TOOL SET, JACK SCREWS-ENGINE BEARINGS & SEALS | 1 | |
| 2129M68G02 | CARBON SEAL & MATING RING INSTALLATION AND REMOVAL KIT | 1 | |
| 2129M69G02 | CARBON SEAL & MATING RING INSTALLATION AND REMOVAL KIT | 1 | |
| 21C7044G01 | SEAL RUNNER AND NO. 1 BEARING INNER RACE HYDRAULIC PULLER | 1 | |
| 21C7877G01 | ACCESSORY GEARBOX PULLER SEAL MATING RING | 1 | |
| 21C8129G01 | PUSHER FRONT FRAME CARBON SEAL AND RING | 1 | |
| 23033027 | PULLER BEARING AND MATTING SEAL RACE COMPRESSOR FRONT | 2 | |
| 23033030 | DRIFT--INSTALLATION, COMPRESSOR FRONT BEARING INNER RACE AND SEAL | 1 | |
| 23033033 | DRIFT--GUIDED, COMPRESSOR FRONT BEARING RING SEAL | 1 | |
| 23033035 | PULLER--COMPRESSOR FRONT BEARING RING SEAL | 1 | |
| 23052521 | Puller – Seal Ring, Combustion Liner, Outer | 1 | |
| 23053554 | Wrench – Power Turbine Aft Bearing And Seal Nut | 1 | |
| 23054807 | Pusher – Seal Runner Spacer & Bearing Fan Shaft | 3 | |
| 23054808 | Holder – Pusher, Seal Runner – Spacer and Bearing, Fan Shaft | 3 | |
| 23054809 | Plate – Puller, Seal Runner, Spacer & Bearing Fan Shaft | 2 | |
| 23058410 | WRENCH, POWER TURBINE AFT BEARING AND SEAL NUT | 1 | |
| 23090722 | GAGE, ACCESSORY-GEARBOX MAGNETIC-SEAL RETAINING RING | 1 | |
| 265341711619751 | ACGT SEAL RING, ROD | 1 | |
| 294892-1 | DRIVEN COMPRESSOR BEARING PULLER (REMOVES 3822099-1 BEARING AND 3826125-1 SEAL CARRIER FROM 3822075-2 MAIN SHAFT) | 1 | |
| 296977-1 | PILOT ASSEMBLY, SEAL AND BEARING, NUCLEUS | 1 | |
| 2C 14094G06 | FIXTURE, SEAL CHECK NO. 4 BEARING AND SEAL | 1 | |
| 2C14094 | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094 REV Y | FIXTURE, SEATCHECK-NO. 4B BEARING & SEAL | 1 | |
| 2C14094G05 | FIXTURE, SEATING CHECK ‐ NO. 4B BEARING AND SEAL | 1 | |
| 2C14094G06 | FIXTURE, SEAT CHECK - NO. 4B BEARING AND SEAL | 1 | |
| 2C14137 | TOOL, INSTL. ACCESS GEARBOX MATING RING SEAL | 2 | |
| 2C14137 REV A | TOOL, INSTL. ACCESS GEARBOX MATING RING SEAL | 1 | |
| 2C14137G01 | TOOL,INTALLATION-ACC GEARBOX MATING RING SEAL | 10 | |
| 2C14137G02 | ACC G/BOX MATING RING SEAL | 8 | |
| 2C14137G03 | TOOL,INTALLATION-ACC GEARBOX MATING RING SEAL | 1 | |
| 2C14137G04 | TOOL,INTALLATION-ACC GEARBOX MATING RING SEAL | 1 | |
| 2C14138 | FIXTURE, REMVL-MATING SEAL RINGS - ACCESS GEARBOX | 1 | |
| 2C14138 REV B | FIXTURE, REMOVAL-MATING SEAL RINGS - ACCESS. GEARBOX | 1 | |
| 2C14138G01 | REMOVAL - MATING SEAL RING -ACCESSORY GEARBOX | 11 | |
| 2C14138G02 | REMOVAL - MATING SEAL RING -ACCESSORY GEARBOX | 14 | |
| 2C14138G03 | REMOVAL - MATING SEAL RING -ACCESSORY GEARBOX | 1 | |
| 2C14138G04 | REMOVAL - MATING SEAL RING -ACCESSORY GEARBOX | 1 | |
| 2C14222G01 | STAND, INSTALL/REMOVE - HPT TURBINE ROTOR SHAFT SEALS AND BEARING RACES | 4 | |
| 2C14610G01 | PUSHER-NO 6 BEARINGS INNER RACE AND SEAL | 1 | |
| 2C14618G02 | PULLER, SUMP CLOSURE AND SEAL STATIONARY NO.4R&5R BEARINGS | 3 | |
| 2C14637G01TK | WRENCH, SPANNER NO.2 BEARING NUT, SEAL, GEAR | 1 | |
| 2C14646G01 | PULLER,#6 BEARING INNER RACE AND SEAL | 3 | |
| 2C14656G02 | GAGE, CONCENTRICITY - NO. 6 BEARING AND SEALS | 3 | |
| 2C14669G01 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING | 3 | |
| 2C14669G02 | PULLER, NO. 4R BEARING INNER RACE, ROTATING AIR, OIL SEAL, AND NO. 4B BEARING FWD RACE ( PULLER ) | 1 | |
| 2C14776 | TOOL,INSTALL-MAGNETIC SEAL AND RETAINING RING | 1 | |
| 2C14776 REV D | TOOL, INSTALL-MAGNETIC SEAL & RETAINING RING | 1 | |
| 2C14776G01 | TOOL,INTALL-MAGNETIC SEAL & RETAINING RING | 2 | |
| 2C4094 | FIXTURE, SEATCHECK- NO 4B BEARING AND SEAL | 1 | |
| 2C5249P01 | PROTECTOR HALF, Nº 5 BEARING & SEALS | 1 | |
| 2C5643G01 | PULLER - #3 BEARING CARBON SEAL | 2 | |
| 2C6047G02 | NO. 4 BEARING INNER RACES AND FORWARD SEAL PULLER ADAPTER | 1 | |
| 2C6120G02 | PUSHER INNER RACE SPACER AIROIL SEAL #1 BEARING | 2 | |
| 2C6262 | PULLER,INNER RACE,SPACER,AIR&OIL SEAL #1 BEARING | 1 | |
| 2C6262G04 | PULLER INNER RACES, SPACER, AIR AND OIL SEAL - NO. 1 BEARING | 1 | |
| 2C6299 | PULLER, COMPR ROTOR AFT SEALS & BEARING RACES | 1 | |
| 2C6299G06 | PULLER, NO. 4 BEARING RACES AND SEALS | 1 | |
| 2C6998G05 | FIXTURE SET REMOVAL MATING SEAL RINGS-ACCESORY GEARBOX | 2 | |
| 2C8040JW97247 | CONCENTRICITY #3 BEARING STATIONARY AIR & OIL SEAL | 1 | |
| 2C81110G01 | PULLER, NO. 1 BEARING INNER RACE AND SEAL | 1 | |
| 2C81413G02 | AFT STATIC SEAL, SPRING MOUNT | 1 | |
| 2C81415G0 | AFT STATIC SEAL, SPRING MOUNT | 1 | |
| 2C81415G01 | PULLER SET, AFT STATIC SEAL, SPRING MOUNT AND CARBON SEAL | 1 | |
| 2C81415G02 | AFT STATIC SEAL, SPRING MOUNT | 1 | |
| 2C91259P01 | RING - DROP CHECK - #6 SEAL | 1 | |
| 2MIT65B01201 | PULLER - LOWER BEARING SEAL RETAINER, SHOCK STRUT, MAIN LANDING GEAR | 12 | |
| 3057362-01 | SEAL RING, METAL, COMPRESSION, U-SHAP | 1 | |
| 332A93-3208-00 | EXTRACTION/HAFTING SEALING RING MGB | 1 | |
| 350A93-3321-00 | DOUBLE SEAL/RING HAFTING DEVICE | 1 | |
| 350A93-3325-00 | BEARING SEAL/ NON-ROTATING SWASHPLATE EXTRACTIONTOOL | 1 | |
| 360A93-3214-00 | SEAL FRICTION RING EXTRACTOR | 1 | |
| 360A93321400 | SEAL FRICTION RING EXTRACTOR | 1 | |
| 365A93310201 | EXTRACTOR SHAFT HOUSING BEARING SEAL | 1 | |
| 365A93334500 | SEAL BEARING BUSH EXTRACTOR | 1 | |
| 3ASH45A | ROD SEAL REMOVING TOOL (45 DEGREE O-RING PICK) (GOODRICH P/N 670166) | 1 | |
| 3MIT65B01202 | PULLER - LOWER BEARING SEAL RETAINER, SHOCK STRUT, NOSE LANDING GEAR | 9 | |
| 41003-01 | BCW Engineering 41003-01 Brown Phenolic 316 x 34 x 8 Hand Held Sealant Scraper | 2 | |
| 41004-01 | BCW Engineering 41004-01 Brown Phenolic 316 x 1 x 8 Hand Held Sealant Scraper | 2 | |
| 41005-01 | BCW Engineering 41005-01 Brown Phenolic 316 x 1-12 x 8 Hand Held Sealant Scraper | 2 | |
| 41006-01 | BCW Engineering 41006-01 Brown Phenolic 316 x 2 x 8 Hand Held Sealant Scraper | 2 | |
| 4164042-1 | SEAL CONDITIONING RING | 1 | |
| 4164043-1 | SEAL CONDITIONING RING | 1 | |
| 4164044-1 | SEAL CONDITIONING RING | 1 | |
| 460003180-24 | RING KEEP FOR MLG SEAL CHANGE | 18 | |
| 460005171-95 | CONE INSTL SEAL/RING ONSWIVEL MLG | 12 | |
| 473015 | REPLACEMENT HOSES TOOL NO. 473015 THIS KIT CONTAINS ALL HYDRAULIC SEALS CAPABLE OF REBUILDING ONE HYDRAULIC JACK OF THE AA293268 CYLINDER HEAD/MAIN BEARING HYDRAULIC FIXTURE. | 1 | |
| 57195K81 | BASIC SET (BEARING/ BUSHING AND SEAL DRIVER SETS) | 1 | |
| 65A93-3345-00 | SEAL BEARING BUSH EXTRACTOR | 1 | |
| 661-712 | METRIC SEALING RING ¿6.2X17.5X2 | 1 | |
| 670166 | ROD SEAL REMOVING TOOL (45 DEGREE O-RING PICK) (GOODRICH P/N 670166) | 1 | |
| 716181 | Assembly of Sealing Ring on Selector Valve | 1 | |
| 726691 | BEARING CYLINDER SEALS INSTALLATION SET | 1 | |
| 726713 | SEAL AND RING INSTALLATION CONE | 1 | |
| 726714 | SEAL AND RING INSTALLATION CONE | 1 | |
| 726715 | CONE AND RING FOR INSTALLATION OF SEAL | 1 | |
| 726717 | CONE AND RING FOR INSTALLATION OF SEAL | 1 | |
| 726844 | CONE AND RING FOR SEAL AND SEGMENT INSTALLATION | 1 | |
| 6796169 | GUIDE PIN - COMPRESSOR REAR SEAL AND BEARING | 2 | |
| 6796190 | DRIVER - COMPRESSOR REAR BEARING AND SEAL | 2 | |
| 6796952 | Puller â Forward Bearing & Seal, Compressor | 2 | |
| 6796971 | PULLER, BEARING AND SEALS, FRONT COMPRESSOR LABYRINTH | 3 | |
| 6797708 | PULLER, COMPRESSOR REAR BEARING & DOUBLE LABYRINTH SEAL | 2 | |
| 6797939 | COMPRESSOR - 3.921 INCH OD SPLIT SEAL RING | 2 | |
| 6797940 | COMPRESSOR - 6.250 OD SPLIT SEAL RING | 2 | |
| 6799518 | PULLER—GAS PRODUCER BALL BEARING LABYRINTH SEAL ASSEMBLY | 1 | |
| 6877021 | SEAL FIXTURE, SECONDARY ORIFICE (WITH INLET SIMULTANEOUSLY CONNECTS METERING AND EXIT HOSE) TIP AND INLET OF FUEL NOZZLE ASSEMBLY TO PRESSURE SOURCE FOR PROOF TESTING. | 1 | |
| 6877023 | SECONDARY SUPPORT RING ADAPTER LOCATES AND SEALS SECONDARY TO SUPPORT JOINT DURING PREWELD TESTING. | 1 | |
| 6877025 | SEAL RING ADAPTER FIXTURE, VALVE END SEALS SUPPORT TO COVER JOINT DURING PREWELD FLOW TESTING. | 1 | |
| 6893738 | COMPRESSOR CARBON SEAL RET RING PLIER | 2 | |
| 6893739 | PULLER--COMPRESSOR REAR BEARING, OIL SLINGER AND SEAL | 2 | |
| 6897102 | PRIMARY SUPPORT RING FIXTURE LOCATES AND SEALS PRIMARY TO SUPPORT JOINT DURING PREWELD TESTING. | 1 | |
| 6897104 | SEAL FIXTURE, PRIMARY ORIFICE PLUGS PRIMARY ORIFICE DURING PAST WELD PRESSURE TEST, NO SECONDARY PRESENT. | 1 | |
| 6897105 | SEAL PLUG, CHECK VALVE SEALS CHECK VALVE BORE DURING FUEL NOZZLE ASSEMBLY TESTS. | 1 | |
| 6898412 | #1 SEAL SPRING COMPRESSOR | 2 | |
| 460004632 | EXTRACTOR - BEARING AND SEAL HOUSING | 1 | |
| 751587-007 | STRAP - UTILITY (INCLUDED IN J32014, LOWER BEARING SEAL REPLACEMENT EQUIPMENT) | 1 | |
| 833496-10 | Seal Conditioning Ring | 1 | |
| 833496-7 | Seal Conditioning Ring | 1 | |
| 833496-8 | Seal Conditioning Ring | 1 | |
| 833496-9 | Seal Conditioning Ring | 1 | |
| 833497-2 | Seal Conditioning Ring | 1 | |
| 833498-2 | Seal Conditioning Ring | 1 | |
| 833500-2 | Seal Conditioning Ring | 1 | |
| 833500-3 | Seal Conditioning Ring | 1 | |
| 833511-6 | Seal Conditioning Ring | 1 | |
| 833511-8 | Seal Conditioning Ring | 1 | |
| 833511-9 | Seal Conditioning Ring | 1 | |
| 833512-1 | Seal Conditioning Ring | 1 | |
| 833512-2 | Seal Conditioning Ring | 1 | |
| 833512-3 | Seal Conditioning Ring | 1 | |
| 833512-4 | Seal Conditioning Ring | 1 | |
| 833513-10 | Seal Conditioning Ring | 1 | |
| 833513-11 | Seal Conditioning Ring | 1 | |
| 833513-12 | Seal Conditioning Ring | 1 | |
| 833513-7 | Seal Conditioning Ring | 1 | |
| 833513-8 | Seal Conditioning Ring | 1 | |
| 833513-9 | Seal Conditioning Ring | 1 | |
| 833514-5 | Seal Conditioning Ring | 1 | |
| 833514-6 | Seal Conditioning Ring | 1 | |
| 833514-7 | Seal Conditioning Ring | 1 | |
| 833514-8 | Seal Conditioning Ring | 1 | |
| 833516-5 | Seal Conditioning Ring | 1 | |
| 833516-6 | Seal Conditioning Ring | 1 | |
| 833516-7 | Seal Conditioning Ring | 1 | |
| 833517-4 | Seal Conditioning Ring | 1 | |
| 833517-5 | Seal Conditioning Ring | 1 | |
| 834443-1 | FAN PULLER (SUPPORTS 3826127-1 SEAL CARRIER DURING REMOVAL OF 3611175-1 SEAL ASSEMBLY SUPERSEDES 294880-1) | 1 | |
| 856A 2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A 2395G01 | SECTOR CENTERING LPT STAGE 2/INNER STATIONARY AIR SEAL | 1 | |
| 856A1046 | WRENCH, NO. 3 BEARING - ROTATING SEAL (NO. 3 BEARING WRENCH) | 1 | |
| 856A1046 G01 | Wrench No. 3 Bearing ‐ Rotating Seal | 1 | |
| 856A1046G03 | WRENCH NO. 3 BEARING ‐ ROTATING SEAL | 3 | |
| 856A1216 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 2 | |
| 856A1216 G02 | PULLER - NO. 4 BEARING OUTER RACE, OIL SEAL AND AI | 12 | |
| 856A1216G01 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 3 | |
| 856A1216G02 | Puller - No. 4 Bearing Outer Race, Oil Seal and Air Duct (puller) | 12 | |
| 856A1216G03 | PULLER-NO4 BEARING OUTER RACE, OIL SEAL & AIR DUCT | 1 | |
| 856A2377G01 | FIXTURE CENTERING & HANDELING ROTATIONAL SEAL | 1 | |
| 856A2395G01 | SECTOR CENTERING LPT STAGE 2/INNER STATIONARY AIR SEAL | 1 | |
| 856A2616G01 | SECTOR, CENTERING LPT SHAFT FORWARD SEAL. | 5 | |
| 856A2789 | RING CENTER AFT ROTATING AIR SEAL | 1 | |
| 856A2789502 | RING CENTER AFT ROTATING AIR SEAL | 1 | |
| 856A2789G01 | RING, CENTERING ROTATING REAR AIR SEAL ON LPT SHAFT | 1 | |
| 856A2789G02 | Ring, Centering - Rear Rotating Air and Oil Seals on LPT Shaft (centering ring) | 5 | |
| 856A3570 | WRENCH, NO. 2 BEARING INNER RACE SEAL RETAINER (WRENCH) | 1 | |
| 856A3570 G01 | Wrench No. 2 Bearing Inner Race Seal Retainer | 9 | |
| 856A3570G01 | WRENCH, NO. 2 BEARING INNER RACE SEAL RETAINER (WRENCH) | 9 | |
| 856A3794G01 | RING, HOLDING 2EACH(TO HOLD THE STAGE 1 OUTER STATIONARY AIR SEAL AND SHROUD SUPPORT ASSEMBLY DURING TRANSPORTATION OF THE LPT) | 9 | |
| 856A4026G02 | FIXTURE MACHINING NO. 3 BEARING FORWARD STATIONARY OIL SEAL | 1 | |
| 877615 | EXTRACTOR ASSY FOR ROLLER BEARING, OIL SEAL | 1 | |
| 8812954000 | SEALING RING PROTECTION | 2 | |
| 8814661000 | EXTRACTOR FOR SEALING RING | 2 | |
| 8C2067 | FIXTURE, INSTALLATION - #4 BEARING CARBON SEAL | 1 | |
| 8C2071 | FIXTURE, REMOVAL - CARBON SEAL, NO. 4 BEARING | 1 | |
| 8C2423 | TOOL, INSTALLATION - NO 5 BEARING CARBON SEAL | 1 | |
| 8C2511 | FIXTURE, PUSHER/PULLER CARBON SEAL NO. 1 BEARING | 1 | |
| 8C2514 | FIXTURE, TEST - CARBON SEAL - NO. 1 BEARING | 1 | |
| 9441M40 | RING, PUSHER-CARBON SEAL | 1 | |
| 9441M40 REV A | RING, PUSHER-CARBON SEAL | 1 | |
| 956A1098 | FIXTURE - LEAKAGE TEST-CARBON SEAL - N0 4. BEARING | 1 | |
| 956A1506 | COVER - SEAL - NUT LOCKING NUMBER 3 BEARINGS | 1 | |
| 956A3093 | FIXTURE - LEAKAGE TEST - CARBON SEAL - NO. 4 BEARING | 1 | |
| 956A6303 | PROTECTOR-ROTATING SEAL BEARING NO. 4 | 1 | |
| 956A6423 | PROTECTOR - LPT REAR SUMP SEAL RING | 1 | |
| 956A6424 | PROTECTOR - LPT SEAL RING | 1 | |
| 956A6425 | COVER - PROTECTOR - RING SEAL BEARING 5 | 1 | |
| 956A6485 | SET - PUSH SCREWS - LPT SEAL RING | 1 | |
| 956A6488 | SET, PUSH SCREWS - LPT SEAL RING | 1 | |
| 956A6489 | FIXTURE - PULLER - LPT RING -SEAL REAR ENCLOSURE | 1 | |
| 956A6617 | FIXTURE, FLOW CHECK - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6619 | FIXTURE - CENTERING - CARBON SEAL NO.5 BEARING | 1 | |
| 956A6809 | WRENCH FOR THE SEAL ROTATING BEARING 1 | 1 | |
| 956A6812 | FIXTURE, CENTERING - FRONT ROTATING SEAL | 1 | |
| 956A8038 | CLAMP - INSTALL/REMOVE RING SPRING FIRE SEALING | 1 | |
| 956A8402 | FIXTURE - INSTALL/REMOVE - RING - SEAL-REAR ENCLOSURE | 1 | |
| 956A8406 | WRENCH - TIGHTENNING ? RING - SEAL | 1 | |
| 956A8416 | PROTECTOR - RING SEAL | 1 | |
| 956A8417 | PROTECTOR - RING SEAL - REAR ENCLOSURE | 1 | |
| 956A8432 | FIXTURE - DOG-CLUTCHING - RING - SEAL STG 2 | 1 | |
| 956A8437 | HEATER RING - SEAL-REAR ENCLOSURE | 1 | |
| 956A8519 | PROTECTOR - RING SEAL - REAR ENCLOSURE | 1 | |
| 98S52305007000 | TOOL REPAIRING SEAL CARGO DOOR | 3 | |
| 9C1928G01 | KIT EXTRACTOR, MATING RING, SEAL | 1 | |
| 9C1929G02 | ACCESSORY GEARBOX CARBON SEAL AND MATING RING EXTRACTOR TOOL SET | 1 | |
| 9C3035P01 | TOOL, INSTALLATION - NO.5 BEARING CARBON SEAL | 1 | |
| A1310B | BEARING AND SEAL DRVR ST 10PC | 1 | |
| A1310LHB | 7PC ALUM SEAL AND BEARING SET | 1 | |
| A1310LHSB | 7PC STEEL SEAL AND BEARING SET | 1 | |
| A1310SB | BEARING AND SEAL DRVR ST 10PC | 1 | |
| A32005 | REPLACEMENT EQUIP – SEAL, LOWER BEARING MLG | 1 | |
| A32005-54 | REPLACEMENT EQUIPMENT - SEAL, LOWER BEARING, MAIN LANDING GEAR (MLG) | 9 | |
| A32005-74 | REPLACEMENT EQUIPMENT - SEAL, LOWER BEARING, MAIN LANDING GEAR (MLG) | 10 | |
| A32045-101 | Wrench - Spanner, Nlg Steering Actuator Seal Nut | 10 | |
| A32045-41 | WRENCH NLG STEERING SEAL ACTUATOR NUT | 1 | |
| A32045-62 | WRENCH NLG STEERING SEAL ACTUATOR NUT | 1 | |
| A32107-1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 2 | |
| AGE13296 | FACE SEAL & MATING RING PULLER ASSEMBLY | 1 | |
| AGE13300 | FACE SEAL & MATING RING PULLER ASSEMBLY | 1 | |
| AGE70519 | REAR CARBON SEAL CENTERING | 1 | |
| AID-01148 | AFT CARBON SEAL CENTERING TOOL | 1 | |
| APCAC100-3-1 | SEALING RING EXTRACTION SUPPORT | 1 | |
| AS3209-212 | PREFORMED PACKING SEAL,O-RING | 1 | |
| BTA-62025 | PROTECTOR NLG WHEEL BEARING HUB SEAL, BLUE | 1 | |
| BTA-62028P | MAIN WHEEL HUB & BEARING CASE SEAL-RED | 1 | |
| BTA-62028PG | PROTECTOR MLG WHEEL HUB & BEARING SEAL 2 PC | 1 | |
| C32016-7 | STUFFER - RING SEAL, C32016-7 (INCLUDED IN C32016 KIT) | 4 | |
| C32017 | REPLACEMENT EQPT LWR BEARING SEALS MAIN LANDING GEAR | 1 | |
| C32017-1 | Replacement Equipment - Lower Bearing Seals, Main Landing Gear | 4 | |
| C32017-43 | REPLACEMENT EQPT - LOWER BEARING SEALS, MLG | 3 | |
| C32017-47 | O-RING, LOWER SEAL EQUIPMENT, MLG (C32017-47 PART OF KIT C32017-53) | 2 | |
| C32017-52 | Replacement Equipment - Lower Bearing Seals, Main Landing Gear | 5 | |
| C32017-53 | Replacement Equipment - Lower Bearing Seals, Main Landing Gear | 17 | |
| C32017-67 | REPLACEMENT EQPT - MLG LWR BEARING SEALS | 5 | |
| C32064-1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 3 | |
| C49013-1 | APU DUCT SPRING SEAL TOOL | 1 | |
| C49013-2 | APU DUCT SPRING SEAL TOOL | 1 | |
| CH1543-0040 | SEAL GUIDE FOR O-RING INSTALLATION OF GUIDE TUBE ASSY (P/N CH1543A0011) | 1 | |
| CHA698-127 | SEAL BEARING EXTRACTOR | 1 | |
| DAPT60-0188-00 | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 8 | |
| DAPT60-0188-00-IAS | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 1 | |
| DAPT60-0188-00IAS | WRENCH/SPANNER BEARING (PRESSURE CHAMBER SEAL FAILURE) | 1 | |
| DAPT60-0386-00 | SEAL COMPRESSION RING | 5 | |
| DAPT60-0386-00-IAS | SEAL COMPRESSION RING | 1 | |
| DAPT60−0188−00 | WRENCH − BEARING, PRESSURE CHAMBER SEAL FAILURE (SERIES 400) | 8 | |
| DAPT60−0386-00 | SEAL COMPRESSION RING | 5 | |
| DAS-25106-13 | SIZING RING,SEAL,HYDRAULIC ACTUATOR | 1 | |
| DOW CORNING MOLYKOTE 111 | O-RING VALVE SILICONE LUBRICANT & SEALANT | 1 | |
| DSS 2913 | KIT, SEAL SURFACE CURING SYSTEM 110V | 4 | |
| DSS2913 | KIT, SEAL SURFACE CURING SYSTEM | 4 | |
| DSS2913 (115V KIT) DSS2923 (220V KIT) | SURFACE SEAL CURING KIT | 1 | |
| DSS2913 (115V Kit) DSS2923 (220V Kit) | SURFACE SEAL CURING KIT | 1 | |
| DSS2923 | SURFACE SEAL CURING KIT 220V | 2 | |
| E2J65333 | GUIDE TOOL - PISTON RINGS, SEAL CARRIER, RB211-524G/H | 3 | |
| F70312 | CROWFOOT STEERING ACTUATOR SEALNUT 3 5/8 | 2 | |
| FP00-0173 | SEAL , EP/FKM-FILL CAP O-RING | 1 | |
| GS19821-1 | EXPAND THE ACTUATOR SEAL DURING ASSEMBLY | 2 | |
| GS23137-1 | Compressor Ring Seal | 8 | |
| HIX3010-0G | J-SEAL ("J"RING) INSPECTION TOOL | 2 | |
| IAE2M14186 | GAGE, INSPECTION - ENGINE ASSY, LPT-ACC, PERI-SEAL RING | 3 | |
| IAE2M14187 | GAGE, INSPECTION - ENGINE ASSY, LPT-ACC, PERI-SEAL RING | 3 | |
| J32014-116 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MLG | 11 | |
| J32014-89 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MLG | 1 | |
| J32082 | RPLACEMENT EQPT.LOWER BEARING SEALS MLG | 1 | |
| J32082-1 | REPLACEMENT EQPT-LOWER BEARING SEALS,MLG | 1 | |
| J32082-62 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 1 | |
| J32082-69 | Replacement Eqpt - Lower Bearing Seals MLG | 1 | |
| J32082-73 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 6 | |
| J32082-98 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR (MLG) | 8 | |
| K32011 | REPLACEMENT EQPT -0 LOWER BEARING SEALS, MLG | 1 | |
| K32011-1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 2 | |
| K32011-2 | REPLACEMENT EQUIP, BEARING SEAL | 4 | |
| K32011-56 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 1 | |
| K32011-63 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 3 | |
| K32011-64 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 2 | |
| K32011-90 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 4 | |
| K32011-91 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 6 | |
| K32011‑1 | REPLACEMENT EQUIPMENT - LOWER BEARING SEALS, MAIN LANDING GEAR | 2 | |
| M83248/1-230 | SEAL RING-HYDRAULIC FLUID, RUBBER | 1 | |
| MOLYKOTE111 | O-RING VALVE SILICONE LUBRICANT & SEALANT | 1 | |
| NSA8203-113 | SEAL-O-RING FLUOROSILICONE REPLACE BY F70-113 | 1 | |
| OU145414 | RING-SHRINKING SEAL & BACKUP | 10 | |
| PWA 12812 | Fixture Compr.rear bearing seal air pressure tube | 1 | |
| PWA 9133 | PROTECTOR NO.5 BEARING SEAL | 1 | |
| PWA106326 | DRIFT, INSTALL (NO. 4 BEARING INNER RACE, SEALS, AND SPACERS) | 1 | |
| PWA107956 | DRIFT, HANDLE-GEARBOX, FACE SEAL ROTATING RING, INSTALL | 1 | |
| PWA12015 | DRIFT SEAL SLINGER AND BEARING INNER RACE | 1 | |
| PWA12768 | BEARING 4 1/2 DLIFT FOR SEAL SPACER | 1 | |
| PWA27908 | COVER - NO.3 BEARING FRONT AIRSEAL_[PWA27908] | 1 | |
| PWA75913 | FIXTURE - HOLDG NO4 BEARING SEAL SPACER_REPLACESPWA27491BYT.B87-067_[PWA75913] | 1 | |
| PWA80157 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL IDGS | 1 | |
| PWA80158 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL STARTER | 1 | |
| PWA80222 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING DEOILER | 1 | |
| PWA80237 | PULLER MECHANICAL GEARBOX PMA FACE SEAL ROTATING RING REMOVAL | 2 | |
| PWA81098 | PULLER MECHANICAL GEARBOX FACE SEAL ROTATING RING REMOVAL | 1 | |
| PWA85036 | AIRFLOW CHECK NO. 1 BEARING (CARBON) SEAL ASSEMBLY | 1 | |
| PWA85504 | PULLER KNOCKER DIFFUSER CASE 15TH STAGE AIR SEALING RING | 1 | |
| PWA85600 | MACHINING STATOR LPC 1.6,2 AND 3RD STAGE INNER AIRSEAL RING | 1 | |
| PWC31195 | CLIPS, RETAINING, SEALING RINGS | 3 | |
| PWC31274 | PULLER, NO. 4 BEARING CARBON SEAL | 1 | |
| PWC31275 | DRIFT, NO. 4 BEARING, CARBON SEAL | 1 | |
| PWC31562 | PUSHER, NO.4 BEARING CARBON SEAL | 1 | |
| PWC31563 | DRIFT , NO.4 BEARING CARBON SEAL | 1 | |
| PWC37093 | CRIMPER, NO. 6 & 7 BEARING CRUSH SEALS | 9 | |
| PWC38101 | FIXTURE, HOLDING, LOW PRESSURE VANE RING SEAL MACHINING | 2 | |
| PWC42040 | Drift No. 1 bearing carbon seal | 2 | |
| PWC42049 | Drift No. 1 bearing carbon seal | 3 | |
| PWC57134 | CLAMP, RING, SEALING | 1 | |
| RB T101910 | Installing Quill Cap Ring Seal | 1 | |
| RB23005023 | PULLER, BEARING & SEAL RING, FRONT COMPRESSOR | 2 | |
| RB23033027 | Puller-Bearing & Mating Seal Race-Frt Compressor | 2 | |
| RB23033030 | DRIFT--INSTALLATION, COMPRESSOR FRONT BEARING INNER RACE AND SEAL | 2 | |
| RB23033033 | Drift-Guided-Compressor Front Bearing Ring Seal | 2 | |
| RB23033035 | Puller-Compressor Front Bearing Ring Seal | 2 | |
| RB6795591 | Compressor Rear Bearing & Seal Installation Pusher | 1 | |
| RB6796952 | Forward Bearing & Seal Compressor Puller | 1 | |
| RB6799518 | Gas Producer Ball Bearing & Labyrinth Seal Puller | 2 | |
| RB6893738 | Compressor Carbon Seal Ret Ring Plier | 2 | |
| RB6893739 | Puller-Rear Compressor Bearing Oil Slinger & Seal | 2 | |
| RB6898412 | Compressor Seal Spring Plate | 2 | |
| RBE332A93-3208-00 | Extraction/Halfting Seal Ring MG | 2 | |
| RRT027645 | ALIGNMENT TOOL - ALIGN INNER SEAL TO C.R.I.C. TO EASE FITTMENT OF RETAINING RING | 1 | |
| RRT028470 | CLAMP RING - LOAD HP TURBINE SEAL PLATE DURING BUILD. | 1 | |
| RRT029022 | BOLT - LOAD COVER PLATE / SEAL PLATE DURING BUILD | 1 | |
| RSIK1 | KIT SAFETY-RAT,INTERFACE THIS TOOL IS USED TO PROTECT THE RAT DURING TEST IN CASE OF RAT-TEST- MOTOR FAILURE (LEACKAGE OF THE DRIVE SHAFT SEAL). | 10 | |
| SA010463-1 | BEARING SEAL INSPECTION TOOL | 1 | |
| SA010463-2 | BEARING SEAL INSPECTION TOOL | 1 | |
| SEALANT FAIRING TOOL | PLASTIC SEALANT FAIRING TOOL | 1 | |
| ST848 | KIT - INSTALLATION, O-RING SEALS (SET OF 11 TOOLS) (THE BOEING COMPANY) | 15 | |
| TR20-11-10 | RING (TMH MAIN JACK SEAL) | 1 | |
| TR20-51-08 | RING(TMH MAIN JACK SEAL) | 1 | |
| UP40047+++ | RING SEAL COVER | 1 | |
| ZARZ0041-1 | SEAL, O-RING - VITON (FLUOROCARBON) - BRAND: MEGGITT | 1 | |
| lC5702 | PUSHER- NO 6 BEARING AND SEAL RACE | 1 | |
| lC680l | PULLER, ROTATING SEALS & BEARING RACES-AFT SHAFT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
