| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C78018-34 | C Frame | 1 | |
| C78018-34/-37/-38/-39# | C frame | 1 | |
| HU20118 | C Frame | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 956A7314G02 | SET, LIFTING BRACKET, TURBINE REAR FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 956A7314G05 | SET, LIFTING BRACKET, TURBINE REAR FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A27407568000 | STRUT STRUT - DISTANCE, FRAME 91 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A52108008001 | SUPPORT SUPPORT FRAME-BALLAST WEIGHT,DO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A54003003000 | FRAME FRAME-STORAGE PYLON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98A55308526000 | SUPPORT FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203000047 | MOORING MOORING FITTING, FRAME 33 (RH, (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203000048 | MOORING MOORING FITTING, FRAME 62 63 (L (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203000049 | MOORING MOORING FITTING, FRAME 62 63 (R (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D07203013000 | SHORING SHORING FRAME 77 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27104001000 | FRAME FRAME-LIFTING ASSEMBLY,AILERON (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27407533000 | FRAME FRAME - THS ACTUATOR SUPPORT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27407533001 | Frame, THS Actuator Support (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D27408406000 | STRUT STRUT-DISTANCE FRAME 77 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D49207527000 | SUPPORT SUPPORT FRAME FOR APU WITH TROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D49207527001 | SUPPORT SUPPORT FRAME FOR APU WITHOUT TROL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D49209001000 | APU SUPPORT FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98D49209001001 | APU SUPPORT FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27407502001 | STRUT DISTANCE-STRUT,FRAME 91 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27407502002 | STRUT DISTANCE-STRUT,FRAME 91 (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27407513000 | FRAME - SUPPORT, THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98F27408394000 | FRAME FRAME-SUPPORT,THS ACTUATOR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98K7830H003-000 | THRUST REVERSER HOISTING FRAME (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L24208589000 | FRAME FRAME-SUPPORT,RAT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L52108800000 | FRAME-SUPPORT, BALLAST WEIGHT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508773000 | TRANSPORTFRAME-TRACK 4 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508775000 | TRANSPORTFRAME-TRACK 6 LH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L57508775001 | TRANSPORTFRAME-TRACK 6 RH (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L7830H036-001 | FRAME - C, INBOARD TR (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S53005005000 | CROWN PANEL BTWN FRAME 13&23 | 1 | |
| (CALIB) 98S53005006000 | CROWN PANEL BTWN FRAME 13&23 | 1 | |
| (CALIB) 98S53005011000 | CROWN PANEL BTWN FRAME 29&42 | 1 | |
| (CALIB) 98S53005015000 | CROWN PANEL BTWN FRAME 23&29 | 1 | |
| (CALIB) 98S53005016000 | FRAME 25 AND 27 INNER CHORD AT STR10 | 1 | |
| (CALIB) 98V52108800000 | FRAME-SUPPORT, BALLAST WEIGHT (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 99A57103013000 | NDTKIT NDT KIT - FRAME 47, UPPER RADIU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) A1-91-394 | SUPPORT FRAME - APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) B71042-142 | Handling Frame Equipment - C/Duct, RB211-535 Engine (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71027-1 | FRAME INLET COWL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) C71033-1 | Rem/Instl frame eqpt.-Inlet cowl, CFM Leap (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CP30414-1 | FRAME (CALIBRATION) | 1 | |
| (CALIB) RTA075005RH | FRAME FRAME LIFTING FITTING (CALIBRATION) (CALIBRATION) | 1 | |
| 0249930280 | BRACKET, FRAME | 1 | |
| 078371-62179 | 3M 078371-62179 Moon Dawg 11216-00000-20 Black Frame IndoorOutdoor Lenses Safety Glasses | 1 | |
| 078371-62357 | 3M 078371-62357 Metaliks 11345-10000-20 Nickle Frame Mirror Lenses Sport Protective Safety Glasses | 1 | |
| 078371-62375 | 3M 078371-62375 Metaliks 11540-10000-20 Nickle Frame Blue Mirror Lenses Sport Protective Safety Glasses | 1 | |
| 1014568-051KA02 | SCREEN FRAME COVER | 1 | |
| 10C1022G01 | ADAPTER SET ASSEMBLY PEDESTAL - COMPRESSOR REAR FRAME, | 1 | |
| 10C1025 | CF34-10 TURB R FRAME PEDESTAL | 1 | |
| 10C1156G01 | GUIDE - FAN FRAME TO CORE MODULE (GUIDE) | 1 | |
| 10RS.10.1 | N°4 BANJO FRAME TO PYL INTERFACE | 2 | |
| 11C3047 | BRACKET - LIFT/TURN-FRAME - FAN HUB | 1 | |
| 11C3197 | BRACKET - SET-FAN HUB FRAME | 1 | |
| 11C3197G01 | BRACKET SET - FAN HUB FRAME | 1 | |
| 11C3317 | FIXTURE - SEPARATE-HPC MODULE FROM FAN FRAME | 1 | |
| 11C3467 | FIXTURE - GUIDE- TURBINE REAR FRAME- VERTICAL | 1 | |
| 11C3547 | CLOSURE SET - LEAK TEST - TURBINE REAR FRAME (CLOSURE SET) | 1 | |
| 11C4101G02 | BRACKET SET, FAN HUB FRAME | 1 | |
| 11C4293P01 | COVER, PROTECTIVE TURBINE REAR FRAME | 1 | |
| 11C4376 | FIXTURE, BRACKET SET, FAN HUB FRAME | 1 | |
| 11C4399 | BRACKET - LIFT/TURN-FRAME - FAN HUB | 1 | |
| 11C4677 | CONTAINER - SHIPPING - TURB REAR FRAME | 1 | |
| 12053 | HACKSAW FRAME-252MM | 1 | |
| 125/H-20 | AMM CH 20 STANDARD PRACTICES-AIR FRAME | 1 | |
| 144-955-000-702 | ACCELEROMETER COMPRESSOR REAR FRAME | 2 | |
| 161A4103-2 | Bushing，MLG，frame，reaction link | 1 | |
| 169400 | CRIMP TOOL FRAME | 8 | |
| 16A46024L1-1 | FRAME ASSEMBLY, PROTECTIVE - FUEL CELL | 1 | |
| 16A46082L1-1 | FRAME ASSEMBLY, PROTECTIVE - FUEL CELL | 1 | |
| 171720-100 | APU APS-2000 SUPPORT FRAME FOUR BRACKETS FOR APU TRANSPORTATION AND STORAGE | 1 | |
| 17256-005-000 | CYLINDER FRAME | 1 | |
| 19799 | Smith & Wesson 19799 Magnum 3G Black Nylon Frame with Clear Polycarb Anti-Scratch Lense Safety Glasses | 1 | |
| 1C5932 | FIXTURE, LIFT-TURBINE MID FRAME, VERTICAL | 1 | |
| 1C5932 REV C | FIXTURE, LIFT-TURBINE MID FRAME, VERTICAL | 1 | |
| 1C6847 | SLING, FRAMES AND CASINGS-LIFTING, VERTICAL | 1 | |
| 1C6854 | BRACKET FRONT FRAME TO SUB-A | 1 | |
| 1C6854G01 | BRACKET FRONT FRAME TO SUB-A | 1 | |
| 1C6892 | PUSHER, BOLT-FRONT FRAME T G B FWD, MTG BRACKET | 1 | |
| 1C6958 | GAGE, CONCENCTRICITY - TURB. MID FRAME | 1 | |
| 1C6958 REV B | GAGE, CONCENCTRICITY - TURB. MID FRAME | 1 | |
| 1C8099P01 | PROTECTOR, STRUT CAVITY - COMPRESSOR FRONT FRAME | 1 | |
| 1C8327G01 | BRACKET SET-COMPR FRONT FRAME SUB-ASSY D | 1 | |
| 1C8333G01 | JACK ASSEMBLY, SUPPORT COMPRESSOR REAR FRAME | 1 | |
| 1C9064 | FIXTURE, LIFT & TURN-FRONT FRAME & COLLECTOR FWD | 1 | |
| 1C9300G01 | FIXTURE FOR LIFTING AIR COLLECTOR SPECIAL TOOL (LIFTING TOOL) FOR REPLACEMENT FRONT FRAME AIR COLLECTOR | 1 | |
| 1C9346 | SUPPRT ASSY, DOLLY-FRONT FRAME/COLLECTOR | 1 | |
| 1C9372G04 | FRAME ASSEMBLY, MAINTENANCE DOLLY | 1 | |
| 1C9372G05 | FRAME ASSEMBLY, MAINTENANCE DOLLY | 1 | |
| 1C9372G06 | FRAME ASSEMBLY,MAINTENANCEDOLLY, EXTERNALENGINE | 1 | |
| 1C9372G07 | FRAME ASSEMBLY,MAINTENANCEDOLLY, EXTERNALENGINE | 1 | |
| 1C9372G08 | FRAME ASSEMBLY, MAINTENANCE DOLLY | 1 | |
| 1C9372G09 | FRAME ASSY, DOLLY - MAINTENANCE EXTERNAL ENGINE | 1 | |
| 1C9376G01 | JACK ASSEMBLY, SUPPORT COMPRESSOR REAR FRAME | 1 | |
| 1C9429 | TOOL SET, REMOVE- COMPR REAR FRAME AFT CASE | 1 | |
| 1C9448 | JACK ASSY, SUPPORT-COMPRESSOR REAR FRAME | 1 | |
| 2000364 | CRJ3 towbar head for Bombardier CRJ 100-500, Hawker 4000 and Challenger 850 series airframes. Designed with w/radial & linear shear to protect easily damaged nose wheel outer flange and gear. Compatible towbar(s): TB3, TB125 | 1 | |
| 2001041 | Towbar Trolley for GA & Corporate Aircraft, complete kit including rolling/portable organizer trailer, complete set of towbars and heads to fit all aircraft from smallest single engine to G650 & Global Express airframes, towable caster mounted trailer. T | 1 | |
| 2001071 | B727 & A300/310 Aluminum Towbar. Handles Boeing 727 and Airbus A300/310 airframes (also fits American Airlines 757 A /C.) | 1 | |
| 2001099 | B-7 (2011) Maintenance & Crew Access Stairway/Stand. 7' to 15' platform height, 7' to 20' working height. Wide 4'x7' platform and full bumpers (handles DC-9, 727, DC8, 757, 767, A300, A310, A320 series airframes). | 1 | |
| 2001967 | CRJ-COMBO towbar head for all Series Bombardier CRJ 100-500, 700, 705, 900 & Challenger 850/870/890 and Hawker 4000 Airframes. Designed with w/radial & linear shear to protect easily damaged nose wheel outer flange and gear.Compatible towbar(s): TB3, TB1 | 1 | |
| 2007096-A2-REV00 | FRAME DRAWER LXM OS WITHOUT SLOTS REF C-11568 | 1 | |
| 2007096-B2-REV00 | FRAME DRAWER LXM GS WITHOUT SLOTS REF C-11567 | 1 | |
| 2015605 | 3570 Heavy Duty Pallet Trailer for LD1, 2, 3, 4, 6, 7, 8 & 9 containers, 15000 lbs, 96"x125" deck, 96" & 88" stops, omni-directional caster top with caster protection and recessed frame. Preferred dolly for LD7 & LD9 ULD'S | 1 | |
| 2021930 | B727 & A300/310 Aluminum Towbar - EN (CE). Handles Boeing 727 and Airbus A300/310 airframes (also fits American Airlines 757 A /C.) | 1 | |
| 21C7110G01 | FRONT FRAME PRESSURE CHECK FIXTURE | 1 | |
| 21C7247G01 | ADAPTER GG ROTOR/MIDFRAME LOCK/SUPPORT (701C & D'S) | 2 | |
| 21C8128G02 | CRADLE FRONT FRAME ASSEMBLY | 1 | |
| 21C8129G01 | PUSHER FRONT FRAME CARBON SEAL AND RING | 1 | |
| 21C8130G01 | PULLER FRONT FRAME CARBON SEAL | 1 | |
| 21C8988G01 | PUSHER PULLER FRONT FRAME WINDBACK SEAL | 1 | |
| 2229738-7 | TESTER - DFDAU (DIGITAL FLIGHT DATA ACQUISITION UNIT) "-7" TESTER CAN READ 64, 128, OR 256 WORD/SECOND FRAMES. (TELEDYNE TECHNOLOGIES INC.) | 3 | |
| 23055683 | Cover – Forward Frame, Engine Assembly & Disassembly | 1 | |
| 23060688 | Cover – Front Frame | 1 | |
| 247C5250 | TOOL SET, REMOVE-COMPR REAR FRAME AFT CASE | 1 | |
| 247C5250G01 | TOOL SET, REMOVE-COMPR REAR FRAME AFT CASE | 1 | |
| 24X650APBO | 24IN DOOR FRAME UNDER CAB RED | 1 | |
| 24X650APC | 24IN DOOR FRAME UNDER CAB BLK | 1 | |
| 2558757 | STRUT DISTANCE-STRUT,FRAME 91 | 17 | |
| 2C14021G01TK | BRACKET SET TURBINE FRAME SUBASSEMBLY STAND | 1 | |
| 2C14178 | ADAPTER, PEDESTAL COMPR REAR FRAME AFT FLANGE | 1 | |
| 2C14178 REV A | ADAPTER, PEDESTAL COMPR REAR FRAME AFT FLANGE | 1 | |
| 2C14178G01 | ADAPTER SET -PIEDESTAL-COMP REAR FRAME | 2 | |
| 2C14201G01 | PEDESTAL SET - COMPRESSOR REAR FRAME | 1 | |
| 2C14203 | ADAPTER SET, PEDESTAL-COMPR. REAR FRAME | 1 | |
| 2C14203 REV B | ADAPTER SET, PEDESTAL-COMPR. REAR FRAME | 1 | |
| 2C14203G01 | ADAPTER SET -PIEDESTAL-COMP REAR FRAME | 3 | |
| 2C14229G02 | COMPRESSOR REAR FRAME AFT SEALS | 1 | |
| 2C14638G02 | CLOSURE SET, LEAK CHECK TURB FRAME LUBE SYS | 1 | |
| 2C14653G01TK | BRACKET SET TURBINE REAR FRAME TO SUB ASSEMBLY STAND | 1 | |
| 2C14661G01 | FIXTURE, INSTALLREMOVE COMP REAR FRAME ASSY | 2 | |
| 2C14661G02 | FIXTURE, REMOVAL COMPRESSOR EAR FRAME ASSEMBLY | 1 | |
| 2C14675 | SUPPORT, SUMP HOUSING-COMPR REAR FRAME, AFT | 1 | |
| 2C14681G02 | GAGE SET, CONCENTRICITY-COMPR FRAME | 4 | |
| 2C14737 | ADAPTER, LIFT-FAN CASE & FRAME AFT. | 1 | |
| 2C14737 REV E | ADAPTER, LIFT-FAN CASE & FRAME AFT. | 1 | |
| 2C14780 | ADAPTER, PEDESTAL - COMP REAR FRAME | 1 | |
| 2C14780 REV E | ADAPTER, PEDESTAL - COMP REAR FRAME | 1 | |
| 2C14780G02 | ADAPTER, PEDESTAL - COMPRESSOR REAR FRAME | 2 | |
| 2C14875G01 | PROTECTOR, COMPRESSOR REAR FRAME OUTER AFT FLANGE | 1 | |
| 2C15013G01 | COMP. REAR FRAME SUMP MODIFIED FIXTURE | 1 | |
| 2C15600G01 | FIXTURE, POSITION-COMPR REAR FRAME SUMP | 1 | |
| 2C15600G01/P03 | COMPRESSOR REAR FRAME SUMP FIXTURE | 1 | |
| 2C18044 | ADAPTER SET ASSYPEDESTAL-COMPRESSOR REAR FRAME | 1 | |
| 2C18044G01 | ADAPTER PEDESTAL - COMPRESSOR REAR FRAME (PEDESTAL ADAPTERS) | 1 | |
| 2C6025 | PROTECTOR,FUEL NOZZLE PORT-COMPRESSOR REAR FRAME | 1 | |
| 2C6145 | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6145 REV H | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6168 | SLING, FRAMES-LIFTING & CLEAING VERTICAL | 1 | |
| 2C6168G02TK | SLING, FRAMES-LIFTING AND CLEANING, VERTICAL | 1 | |
| 2C6218G01TK | BRACKET SET, TURBINE MID FRAME TO SUBASSEMBLY STAND | 1 | |
| 2C6281 | GAGE SET, CONCENTRICITY - COMPR. REAR FRAME | 1 | |
| 2C6281 REV M | GAGE SET, CONCENTRICITY - COMPR. REAR FRAME | 1 | |
| 2C628I | GAGE SET, CONCENTRICITY - COMPR. REAR FRAME | 1 | |
| 2C6500 | FIXTURE , RESTRAINING COMPR REAR FRAME | 1 | |
| 2C6812G01 | BRACKET , TURBINE REAR FRAME | 1 | |
| 2C6934G03 | A SUMP FAN FRAME FIXTURE LEAK CHECK | 1 | |
| 2C6934G04-AF | FIXTURE,LEAK CHECK-A SUMP, FAN FRAME | 1 | |
| 2C6I45 | FIXTURE, CONCENTRICITY-FAN FRAME, NO. 3 BRG. SEALS | 1 | |
| 2C6I68 | SLING, FRAMES-LIFTING & CLEAING VERTICAL | 1 | |
| 2C81026 | COVER, PROTECTIVE-EXHAUST FRAME | 1 | |
| 2C81026G01 | EXHAUST FRAME PROTECTIVE COVER | 1 | |
| 2C81051G01 | OUTER FRAME ASSY CF34-8E ENGINE | 1 | |
| 2C81051G03 | FRAME OUTER SEE TECH BOX | 1 | |
| 2C81051G04 | OUTER FRAME ASSY CF34-8E ENGINE | 1 | |
| 2C81052 | INNER FRAME ASSEMBLY CF34-8D-8E | 1 | |
| 2C81052G01 | INNER FRAME ASS CF34-8E HANGAR | 2 | |
| 2C81223 | TRUNNION, FRT FRAME CF34 | 1 | |
| 2C81223G01 | TRUNNION, FRT FRAME CF34 | 1 | |
| 2C91255P01 | RING - FRONT FRAME MACHINING | 1 | |
| 2MIT65B56182 | HANDLING FRAME ASSEMBLY - CEILING SUPPORT STRUCTURE | 1 | |
| 2R1003 | DRILL FIXTURE - FRAME CASE AND SUPPORT | 1 | |
| 30-506 | IDEAL CRIMPER - FRAME ONLY | 1 | |
| 303-2653N | 0-6" SOLID METAL FRAME MICROMETER SET | 1 | |
| 30R0327G01 | SPECIAL TOOL - FIXTURE, LEAK CHECK SWIRL FRAME ANTI-ICING | 1 | |
| 325 | ERGO™ PROFESSIONAL HAND HACKSAW FRAMES 300 MM | 2 | |
| 330A93-3403-00 | ASSEMBLY,STANDS AND FRAMES (ICO 13-10-80-01) FRAME, ASSEMBL | 1 | |
| 332A94-2720-00 | DAMPER HOLDING FRAME (REF ICO 92-41-00-01-100) | 1 | |
| 332A96-5800-00 | MPAI STUB FRAME BLANKING COVERS | 1 | |
| 354940-1 | PRO-CRIMPER III FRAME W/O DIES | 4 | |
| 354940–1 | TE CONNECTIVITY 354940-1 PRO-CRIMPER II FRAME WITH O DIE | 4 | |
| 365A91-2141-01 | JACKING: BALL ASSY, SCREW ON AIRFRAME FRONT [AS365 - EC155] | 1 | |
| 371042-184 | C DUCT HANDLING FRAME | 1 | |
| 389217-1 | PULLEY, FRAME BRACKET | 1 | |
| 59500 | THERMASHIELD CRIMP TOOL FRAME | 6 | |
| 460006418 | LOCATION FRAME | 1 | |
| 460006419 | LOCATION FRAME RH | 1 | |
| 460006550 | LOCATION FRAME | 1 | |
| 460006551 | LOCATION FRAME | 1 | |
| 460007234 | LOCATION FRAME L.H. | 4 | |
| 460007234-A | LOCATION FRAME | 1 | |
| 460007234-A?? | LOCATION FRAME?? | 1 | |
| 460007235 | LOCATION FRAME R.H. | 5 | |
| 460007235-A | LOCATION FRAME | 1 | |
| 460007235-A?? | LOCATION FRAME?? | 1 | |
| 4OHME65B05501 | HOIST FRAME ASSEMBLY - UPPER AND LOWER POWER CONTROL UNITS | 1 | |
| 5118T21P01 | SUPPORT,TRANSDUCER,VIBRATION, MID FRAME | 1 | |
| 526060001 | HACKSAW FRAME | 1 | |
| 534913707 | CAJA ROJA SUPPORT FRAME APUT | 1 | |
| 58078-3 | CRIMP TOOL - AMP (TOOL FRAME W/OUT DIES) | 6 | |
| 58532-1 | FRAME; PC III; FIBER OPT; BLACK | 1 | |
| 60-6201 | Bowers 60-6201 Wyler Magnetic Frame Angular Spirit Level Type A48 Size of Base 150mm Sensitivity 0.02mm/m | 1 | |
| 60-6201B | Bowers 60-6201B Wyler Magnetic Frame Angular Spirit Level Type A48 Size of Base 150mm Sensitivity 0.05mm/m | 1 | |
| 60-6201C | Bowers 60-6201C Wyler Magnetic Frame Angular Spirit Level Type A48 Size of Base 150mm Sensitivity 0.1mm/m | 1 | |
| 603E | HACKSAW FRAME | 1 | |
| 612300 | CRIMP TOOL, MINI CHM FRAME | 1 | |
| 613516 | CRIMP TOOL, CHS CLOSED FRAME | 1 | |
| 6200A-1R | ROAD CHEST FRAME | 1 | |
| 630066 | DIE SET (FOR M/5 FRAME) (PIC) | 1 | |
| 630076 | DIE SET (FOR M/5 FRAME, TYPE B CRIMP) | 1 | |
| 630202 | DIE SET (FOR /5 FRAME), SPECIAL | 1 | |
| 630207 | DIE SET (FOR /5 FRAME) METRIC | 1 | |
| 630220 | DIE SET (FOR /5 FRAME) CUSTOM | 1 | |
| 630221 | DIE SET (FOR /5 FRAME) CUSTOM | 1 | |
| 630223 | DIE SET (FOR /5 FRAME) CUSTOM | 1 | |
| 630228 | DIE SET (FOR /5 FRAME) CUSTOM | 1 | |
| 630236 | DIE SET (FOR /5 FRAME) METRIC | 1 | |
| 630267 | DIE SET (FOR /5 FRAME), CUSTOM 4 INDENT | 1 | |
| 630268 | DIE SET (FOR /5 FRAME), CUSTOM 4 INDENT | 1 | |
| 630269 | DIE SET (FOR /5 FRAME), CUSTOM | 1 | |
| 630276 | DIE SET (FOR /5 FRAME) METRIC | 1 | |
| 6383106-1 | CESSNA STANDARD, 525 SERIES CREW SIDE WINDOW FRAME | 1 | |
| 64594-1 | UPPER FRAME BLOCK, A320 SLIDE/RAFT AFT | 1 | |
| 65C37277-21 | STA 727 FRAME AND S-18A CHORD PREVENTIVE MODIFICATION COMBINATION | 1 | |
| 65C37277-22 | STA 727 FRAME AND S-18A CHORD PREVENTIVE MODIFICATION COMBINATION | 1 | |
| 65C37277-23 | STA 727 FRAME PREVENTIVE MODIFICATION | 1 | |
| 65C37277-24 | STA 727 FRAME PREVENTIVE MODIFICATION | 1 | |
| 69008-1150 | Parallel Action Handtool Frame for Telecom Die Sets | 1 | |
| 69008-1171 | Semcon Handtool Frame | 1 | |
| 70-41AP10 | BASIC FRAME ASSEMBLY, PNEU, SPIRAL D-2 | 1 | |
| 70-41AP11 | BASIC FRAME ASSEMBLY, PNEU, SINGLE D-2 | 1 | |
| 70-41AP6 | BASIC FRAME ASSMY. PNEU. SPECIAL | 1 | |
| 70-41AP8 | BASIC FRAME ASSEMBLY, PNEU | 1 | |
| 70-41AP8-CR | BASIC FRAME ASSEMBLY, PNEU (CLEAN ROOM) | 1 | |
| 70-41AP9 | BASIC FRAME ASSY SPECIAL PURPOSE AIR | 1 | |
| 703A94-3000-00 | ASSEMBLY,STANDS AND FRAMES (ICO 13-10-80-01) SUPPORT MOUNT0 | 1 | |
| 728280 | MECHANICAL FRAME | 1 | |
| 834752 | Frame. Run and Transport Cart | 1 | |
| 72210002 | 12053-HACKSAW FRAME-252mm | 1 | |
| 72211000 | 12050 NEW- HACKSAW FRAME - 465MM | 1 | |
| 7100009573 | 3M 078371-62356 Metaliks 11344-10000-20 Nickle Frame Gray Lenses Sport Protective Safety Glasses | 1 | |
| 7531-400-901-001 | Frame, Control Panel | 1 | |
| 7800TD15405-101 | V2500 CAN Wash Stand Frame | 1 | |
| 7OHME65B94270-6 | C-Frame Assembly | 1 | |
| 8562701G02 | FLOOR, PROTECTIVE - FAN INLET CASE TURBINE FRAME | 1 | |
| 856A1015 | 3 CABLE SLING FRAMES | 1 | |
| 856A1015G01 | 3 CABLE SLING FRAMES | 15 | |
| 856A1018G03 | Stand Frame, Cumbustion Case | 14 | |
| 856A1123 | GUIDE-FAN FRAME TO CORE MODULE | 1 | |
| 856A1123 G01 | Guide ‐ Fan Frame to Core Module | 9 | |
| 856A1123 REV B | GUIDE-FAN FRAME TO CORE MODULE | 1 | |
| 856A1123G01 | GUIDE-FAN FRAME TO CORE MODULE;G01 | 9 | |
| 856A1125 G01 | Fixture Lift ‐ Variable CG Rotor to Frames | 5 | |
| 856A1125G01 | Fixture, Lift - Variable CG Rotor to Frames, Horizontal CG (lift fixture) | 5 | |
| 856A1312G02 | CFM56-5B/7B ENGINE FAN FRAME PILLAR | 19 | |
| 856A1312G06 | CFM56-5B/7B ENGINE TURBINE FRAME PILLAR | 18 | |
| 856A1394 G03 | FIXTURE, LIFT - VARIABLE CG ROTOR TO FRAMES, HORIZONTAL CG (LIFT FIXTURE) | 11 | |
| 856A1394G03 | FIXTURE, LIFT - VARIABLE CG ROTOR TO FRAMES, HORIZONTAL CG (LIFT FIXTURE) | 11 | |
| 856A1431G03 | FIIXTURE, RESTRAINING-HPT NOZZLE ASSEMB(THE RESTRAIN FIXTURE IS USED TO RESTRAIN THE NOZZLE SEGMENTS OF THE HP TURBINE NOZZLE ASSEMBLY CIRCUMFERENTIALLY DURING THE INSTALLATION OR REMOVAL FROM THE COMPRESSOR REAR FRAME (CRF) | 7 | |
| 856A1471G02 | CFM56-5B ENGINE TURBINE FRAME CONNECTION BRACKET | 15 | |
| 856A1610G01 | Guide - Fan Frame To Core Module | 1 | |
| 856A1800 | BRACKET SET, SUPPORT - TURBINE, REAR FRAME FORWARD FLANGE | 1 | |
| 856A1800 G02 | Bracket Set - Support Turbine Rear Frame FWD Flange | 18 | |
| 856A1800G01 | BRACKET SET, REAR, FRAME, CFM56-7 | 6 | |
| 856A1800G01 | BRACKET SET, SUPPORT - TURBINE, REAR FRAME FORWARD FLANGE | 6 | |
| 856A1800G02 | BRACKET SET, SUPPORT - TURBINE, REAR FRAME FWD FLANGE | 18 | |
| 856A1805 | GIUDE - FAN FRAME TO CORE MODULE | 1 | |
| 856A1805G01 | GIUDE - FAN FRAME TO CORE MODULE | 5 | |
| 856A1830G01 | GUIDE # ASSEMBLY FAN FRAME TO CORE MODULE(WHEN THE CORE IS BEING MATED TO, OR REMOVED FROM, THE FAN MODULE.) | 1 | |
| 856A2314G05 | MACHINING FIXTURE - FAN FRAME | 1 | |
| 856A2351 | SECTOR TOOL SET, HANDLING-TURBINE FRAME MAINTENANC | 1 | |
| 856A2351G01 | TOOL SET, HANDLING SECTOR - TURBINE FRAME MAINTENANCE MODULE (TOOL SET) | 1 | |
| 856A2351G02 | TOOL SET, HANDLING SECTOR - TURBINE FRAME MAINTENANCE MODULE | 3 | |
| 856A2549 G01 | Sectors Handling ‐ Turbine Frame Module | 3 | |
| 856A2549G01 | SECTORS HANDLING TURBINE FRAME MODULE | 3 | |
| 856A2549G02 | SECTORS HANDLING - TURBINE FRAME MODULE (HANDLING SECTORS | 3 | |
| 856A2613 | SENSOR, VIBRATION - FAN FRAME COMPRESSOR CASE VERTICAL (F.F.C.C.V.) ACCELEROMETER | 1 | |
| 856A2616G01 | SECTOR # CENTERING-LPT SHAFT FWD SEAL(TO CENTER LPT SHAFT RELATIVE TO FAN FRAME DURING NO. 1 AND NO. 2 BEARING SUPPORT MODULE REMOVAL/INSTALLATION) | 5 | |
| 856A2646 | DOLLY, TRUNNION - TURBINE FRAME MAINTENANCE MODULE | 1 | |
| 856A2646G01 | DOLLY TRUNNION TURBINE FRAME MAINTENANCE MODULE | 12 | |
| 856A2646G02 | DOLLY, TRUNNION - TURBINE FRAME MAINTENANCE MODULE (DOLLY) | 3 | |
| 856A2691G01 | EDDY CURRENT INSP KIT REAR FRAME B73 | 26 | |
| 856A2692 | TURBINE REAR FRAME EDDY CURRENT FIXTURE | 1 | |
| 856A2692G01 | EDDY CURRENT TURBINE REAR FRAME | 1 | |
| 856A2692G03 | EDDY CURRENT INSPECTION KIT OF REAR FRAME | 1 | |
| 856A2692G04 | EDDY CURRENT INSPECTION KIT OF REAR FRAME | 1 | |
| 856A2701 | FLOOR, PROTECTIVE - FAN INLET CASE TURBINE FRAME | 1 | |
| 856A2701G01 | FLOOR, PROTECTIVE - FAN INLET CASE TURBINE FRAME | 1 | |
| 856A2701G02 | FLOOR, PROTECTIVE - FAN INLET CASE TURBINE FRAME | 2 | |
| 856A2702G02 | FLOOR, PROTECTIVE - FAN INLET CASE TURBINE FRAME (PROTECTIVE FLOOR) | 1 | |
| 856A2712 | SECTORS, HANDLING - TURBINE FRAME MODULE (HANDLING SECTORS) | 1 | |
| 856A2712G01 | SECTORS, HANDLING - TURBINE FRAME MODULE (HANDLING SECTORS) | 1 | |
| 856A2712G02 | HOIST # SECTORS HANDLING TURB FRAME MO 2EA | 5 | |
| 856A2720P49 | MACHINING FIXTURE - FAN FRAME | 1 | |
| 856A2722G01 | Pins, Guide - Turbine Frame to LPT Case | 6 | |
| 856A2772 | PULLER - LPT REAR FRAME/LPT CASE (PULLER) | 1 | |
| 856A2772G01 | Puller - LPT Rear Frame/LPT Case (puller) | 9 | |
| 856A2900G01 | SLING 3-LEG - FAN FRAME CASING (3-LEG SLING) - | 1 | |
| 856A2907G04 | MACHINING FIXTURE - FAN FRAME ABRADABLE LINER | 1 | |
| 856A2907G05 | MACHINING FIXTURE - FAN FRAME | 2 | |
| 856A3266 G01 | Pins Guide ‐ Turbine Frame To LPT Case | 6 | |
| 856A3266G01 | PINS, GUIDE - TURBINE FRAME TO LPT CASE | 6 | |
| 856A3339G02 | CONTAINER, SHIPPING-TURBINE FRAME | 1 | |
| 856A3533G02 | SLING 3-LEG FAN FRAME CASING | 1 | |
| 856A3744G01 | PROTECTOR,CLEVIS LUG - LPT FRAME | 1 | |
| 856A3759 | SECTORS, HANDLING - TURBINE FRAME MODULE (HANDLING SECTORS) | 1 | |
| 856A3759G02 | SECTORS, HANDLING - TURBINE FRAME MODULE (HANDLING SECTORS) | 3 | |
| 856A3759G03 | Sectors, Handling - Turbine Frame Module (handling sectors) | 9 | |
| 856A3769G01 | Fixture, Handling Pivoting-Fan Frame & Case | 1 | |
| 856A3940G01 | RECONDITIONING FIXTURE - FAN FRAME | 1 | |
| 856A3949G01 | CARTER SUPPORT DOLLY - FAN FRAME | 1 | |
| 856A3950G01 | FILM CARTRIDGE - FAN FRAME | 1 | |
| 856A3953G01 | V-GROOVE INSPECTION KIT - FAN FRAME | 1 | |
| 856A4624 | SCOURING FIXTURE - FAN FRAME STRIP | 1 | |
| 856A4624G02 | SCOURING FIXTURE - FAN FRAME STRIP | 1 | |
| 856A4624G03 | SCOURING FIXTURE - FAN FRAME STRIP | 5 | |
| 856A4639G06 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 2 | |
| 856A4639G08 | TIP CLEARANCE METER - FAN FRAME/FAN | 2 | |
| 856A4639G10 | TIP CLEARANCE METER - FAN FRAME/FAN | 2 | |
| 856A4641G02 | V-GROOVE INSPECTION KIT - FAN FRAME | 1 | |
| 856A4641G03 | V-GROOVE INSPECTION KIT - FAN FRAME | 2 | |
| 856A5816G01 | TIP CLEARANCE METER - FAN FRAME/FAN | 1 | |
| 856A5939G01 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 1 | |
| 856A5939G02 | TIP CLEARANCE METER - FAN FRAME/FAN | 2 | |
| 856A6806G01 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 1 | |
| 856AII23 | GUIDE-FAN FRAME TO CORE MODULE | 1 | |
| 856AII23G0I | GUIDE-FAN FRAME TO CORE MODULE;G0I | 1 | |
| 8C2301 | BRACKETS, ROLLOVER STAND - FAN HUB FRAME | 1 | |
| 8C2601 | BRACKETS, SUPPORT - FAN HUB FRAME | 1 | |
| 8C3107 | COVER SET - PROTECTIVE - TURBINE REAR FRAME | 1 | |
| 8C3110 | CLOSURE SET - LEAK TEST- TURBINE REAR FRAME | 1 | |
| 8C3114 | BRACKET SET - ROLLOVER STAND - TURBINE REAR FRAME | 1 | |
| 8C3261 | FIXTURE - LIFT - FAN FRAME ASSY *(FHF VERTICAL) | 1 | |
| 8G7100G00133 | ENGINE AIRFRAME REMOVAL TOOL - METALIC | 1 | |
| 90479 | Light Duty Guard Face Shield (Description: Frame Only 8" x 12" x .040") (Add to cart: Add To Cart) | 2 | |
| 90800-1 | CRIMP TOOL AMP 90800-1 (FRAME 354940-1) | 2 | |
| 91-455 | SUPPORT FRAME-APU,CONVERSION KIT | 1 | |
| 91/455 | SUPPORT FRAME-APU,CONVERSION KIT | 1 | |
| 9429M26 | BRACKET ARM - LIFT/TURN-FRAME - FAN HUB | 1 | |
| 9429M63 | ADAPTER SET, FLOW CHECK-FRAMES, LUBE SYSTEM | 1 | |
| 9448M84G01 | PEDESTAL SUPPORT-COMPRESSOR REAR FRAME | 1 | |
| 9448M95 | PEDESTAL, SUPPORT - FRONT FRAME, COMPR | 1 | |
| 956A1051 | BRACKET SET - STAND-ROLLOVER TURBINE CENTER FRAME | 1 | |
| 956A1054 | PINS - GUIDE - SEAL INSTALLATION TURBINE CENTER FRAME | 1 | |
| 956A1617G01 | PEDESTAL SET, TURBINE CENTER FRAME (TCF) | 4 | |
| 956A3059 | FIXTURE - DUMMY - TURBINE CENTER FRAME | 1 | |
| 956A6160 | KIT - LOCATING PIN - AGB BRACKET - FAN FRAME | 1 | |
| 956A6554 | PROTECTOR - GRINDING - LPT REAR FRAME | 1 | |
| 956A6570 | FIXTURE - COVER - LPT REAR FRAME | 1 | |
| 956A7314 | SET - LIFTING BRACKET - TURBINE REAR FRAME | 1 | |
| 956A7314G0 | SET, LIFTING BRACKET - TURBINE REAR FRAME | 1 | |
| 956A7314G01 | SET, LIFTING BRACKET-TURBINE REAR FRAME | 1 | |
| 956A7314G02 | SET, LIFTING BRACKET-TURBINE REAR FRAME | 3 | |
| 956A7314G03 | SET, LIFTING BRACKET-TURBINE REAR FRAME | 2 | |
| 956A7314G04 | SET, LIFTING BRACKET - TURBINE REAR FRAME | 9 | |
| 956A7314G05 | SET, LIFTING BRACKET - TURBINE REAR FRAME | 2 | |
| 956A7612 | PROTECTOR - FAN FRAME MOUNTS | 1 | |
| 956A7612G01 | PROTECTOR - FAN FRAME MOUNTS | 1 | |
| 956A7614G01 | PROTECTOR - V GROOVE, SHROUD FAN FRAME | 2 | |
| 956A7643 | TOOL SET - PROTECTOR - TURBINE REAR FRAME ARM | 1 | |
| 956A7668 | COVER, PROTECTOR - TURBINE REAR FRAME | 1 | |
| 956A7668P01 | COVER, PROTECTOR - REAR, TURBINE REAR FRAME | 1 | |
| 956A8011 | FIXTURE - LIFT - FAN CASE & FAN FRAME | 1 | |
| 956A8018G02 | HANDLING BRACKETS - FAN FRAME | 3 | |
| 956A8027 | KIT - LOCATING PIN - AGB BRACKET - FAN FRAME | 1 | |
| 956A8086 | SET - PNEUMATIC CONNECTORS - HUB FAN FRAME | 1 | |
| 956A8106 | SET - ENCLOSURE BLANK - HUB FAN FRAME | 1 | |
| 956A8505 | FIXTURE - LIFT - LPT REAR FRAME AND LPT CASE | 1 | |
| 956A8508 | COVER - PROTECTOR - FRAME - LPT REAR | 1 | |
| 956A8514 | CONTAINER - FRAME - LPT REAR ASSY | 1 | |
| 956A8514G01 | LPT REAR FRAME ASSY CONTAINER | 1 | |
| 956A8528 | PROTECTOR - TUBES - LPT REAR FRAME | 1 | |
| 956A8536 | PROTECTOR - FRAME - LPT REAR ASSY | 1 | |
| 956A8667 | SET - LIFTING BRACKET - TURBINE CENTER FRAME | 1 | |
| 956A8667G01 | Bracket, Lifting - Frame, Turbine Center (TCF) | 1 | |
| 956A8667G02 | Bracket, Lifting - Frame, Turbine Center (TCF) | 2 | |
| 956A8667G03 | Bracket, Lifting - Frame, Turbine Center (TCF) | 3 | |
| 956A8667G04 | SET, LIFTING BRACKET - TURBINE CENTER FRAME | 4 | |
| 956A8681G02 | PROTECTOR - V GROOVE, SHROUD FAN FRAME | 4 | |
| 956A8691G01 | PROTECTOR - FAN FRAME MOUNTS | 1 | |
| 9680M73G03 | PLUG, BORESCOPE FOR REAR FRAME STAGE | 1 | |
| 97D53108315001 | DEVICE-MILLING,FRAMES | 1 | |
| 97D53108672000 | DEVICE-MILLING,FRAMES | 1 | |
| 98A07003908000 | CRADLE-AT FRAME 64 | 1 | |
| 98A27407568000 | STRUT DISTANCE, FRAME 91 | 3 | |
| 98A27407568001 | STRUT-DISTANCE,FRAME 91 | 4 | |
| 98A52108008000 | SUPPORT FRAME-BALLAST WERGHT.PASS/CREW DOORS AUFNAHMEGERUEST F.BALLAST-GEWICHTE.PASS/CREW TUEREN | 3 | |
| 98A52108008001 | SUPPORT FRAME-BALLAST WEIGHT, PASS/CREW DOORS | 13 | |
| 98A52407620 | PROTECTION P31 FRAME 84/85 | 1 | |
| 98A52407620000 | PROTECTION P31 FRAME 84/85 | 5 | |
| 98D07203000048 | JACK FITTING FRAME 62-63 LH | 13 | |
| 98D07203000049 | JACK FITTING FRAME 62-63 RH | 14 | |
| 98D27407504000 | STRUT-DISTANCE FRAME 77 | 2 | |
| 98D27407533000 | FRAME - THS ACTUATOR SUPPORT | 19 | |
| 98D27407533001 | FRAME-THS ACTUATOR,SUPPORT | 15 | |
| 98D27407533100 | FRAME COMPLETE | 1 | |
| 98D27408406000 | STRUT-DISTANCE FRAME 77 | 9 | |
| 98D27408624046 | FRAME,COMPLETE | 1 | |
| 98D29208581100 | BACKSIDE FRAME | 1 | |
| 98D47108901000 | FRAME FRS RI FRAME PROTECT | 1 | |
| 98D49207527000 | APU SUPPORT FRAME, USED SERVICEABLE | 30 | |
| 98D49207527001 | APU SUPPORT FRAME, USED SERVICEABLE | 12 | |
| 98D49209001000 | APU SUPPORT FRAME (WITH TROLLEY INCLUDED) | 7 | |
| 98D49209001002 | APU SUPPORT FRAME (WITH TROLLEY INCLUDED) | 4 | |
| 98D53508411000 | FRAME - SUPPORT, TAILCONE | 1 | |
| 98F07203001040 | SHORING KIT CRADLE FRAME 11 | 2 | |
| 98F07203001042 | SHORING KIT CRADLE FRAME 17 | 2 | |
| 98F07203001044 | SHORING KIT CRADLE FRAME 26 TO 58 | 2 | |
| 98F07203001046 | SHORING KIT CRADLE FRAME 72 | 2 | |
| 98F07203001048 | SHORING KIT CRADLE FRAME 53.2 | 2 | |
| 98F07203001050 | SHORING KIT CRADLE FRAME 80 | 2 | |
| 98F07203006000 | CRADLE-FRAME FR04 | 1 | |
| 98F27407502000 | DISTANCE-STRUT,FRAME 91 | 1 | |
| 98F27407502001 | DISTANCE-STRUT,FRAME 91 | 8 | |
| 98F27407502002 | STRUT DISTANCE-STRUT,FRAME 91 | 2 | |
| 98F2740751300 | FRAME SUPPORT , THS ACTUATOR | 1 | |
| 98F27407513000 | FRAME - SUPPORT, THS ACTUATOR | 13 | |
| 98F27408394000 | FRAME-SUPPORT,THS ACTUATOR | 9 | |
| 98F29208412116 | PROTECTIVE FRAME | 1 | |
| 98F53508371000 | STRUT - DISTANCE, FRAME 91 | 2 | |
| 98F55308393060 | FRAME COMPLETE | 1 | |
| 98L21308497100 | FRAME WINCH | 1 | |
| 98L21308497106 | FRAME RECTANGLE | 1 | |
| 98L25508609000 | SUPPORT-FRAME,FCRC | 1 | |
| 98L27508488000 | FRAME - SUPPORT, GEAR ROTARY ACTUATOR | 1 | |
| 98L27508594040 | BASIC FRAME COMPL. | 1 | |
| 98L27508594100 | BASIC FRAME | 1 | |
| 98L52108459000 | FRAME-SUPPORT,BALLAST WEIGHT RAHMEN-AUFLAGE BALLAST GEWICHT | 1 | |
| 98L52108459040 | FRAME-SUPPORT,BALLAST WEIGHT RAHMEN-AUFLAGE BALLAST GEWICHT | 1 | |
| 98L52108459100 | BASE FRAME COMPL. | 1 | |
| 98L57508771000 | TRANSPORTFRAME-TRACK 2 LH | 1 | |
| 98L57508771001 | TRANSPORTFRAME-TRACK 2 RH | 1 | |
| 98L57508772000 | TRANSPORTFRAME-TRACK 3 LH | 1 | |
| 98L57508772001 | TRANSPORTFRAME-TRACK 3 RH | 1 | |
| 98L57508773000 | TRANSPORTFRAME-TRACK 4 LH | 1 | |
| 98L57508773001 | TRANSPORTFRAME-TRACK 4 RH | 1 | |
| 98L57508774000 | TRANSPORTFRAME-TRACK 5 LH | 1 | |
| 98L57508774001 | TRANSPORTFRAME-TRACK 5 RH | 1 | |
| 98L57508775000 | TRANSPORTFRAME-TRACK 6 LH | 1 | |
| 98L57508775001 | TRANSPORTFRAME-TRACK 6 RH | 2 | |
| 98L7830H036 | C FRAME - TR | 1 | |
| 98L7830H036-000 | FRAME,C-INBOARD TR | 1 | |
| 98L7830H036-001 | FRAME, C - INBOARD TR | 1 | |
| 98L7830H061-000 | C FRAME PROTECTOR - TR (RR AND EA) | 1 | |
| 98N7830H004-000 | AFT FRAME RETAINER KIT(IF WE REMOVE ALL THE T/R CASECADES | 2 | |
| 98S53005005000 | CROWN PANEL BTWN FRAME 13 AND 23 (LAP JOINT) | 3 | |
| 98S53005006000 | CROWN PANEL BTWN FRAME 13 AND 23 (LAP JOINT) | 3 | |
| 98S53005011000 | CROWN PAN. BTWN FRAME 29 AND 42 (LAP JOINT) | 3 | |
| 98S53005013000 | CROWN PANEL BTWN FRAME 42 AND 47 (LAP JOINT) | 3 | |
| 98S53005015000 | CROWN PANEL BTWN FRAME 23 AND 29 (LAP JOINT) | 3 | |
| 98S53005016000 | FRAME 25 AND 27 INNER CHORD AT STR.10 | 3 | |
| 98S53005021000 | CROWN PANEL BTWN FRAME 23 AND 29 (LAP JOINT) | 3 | |
| 98S53305004000 | CROWN PAN. FRAME 13 / 23 (BONDED STRINGER) | 5 | |
| 98S53505002000 | FRAMEWORK FOR INSPECT CALIBRATION FORT SMOOTH 10 | 1 | |
| 98S54205001000 | ENGINE INTERMEDIATE FRAME FLATNESS CHECKING TOOL (HEAVY MAINTENANCE) | 3 | |
| 98S543050022000 | FRAMEWORK FOR INSPECT CALIBRATION FORT SMOOTH 10 | 1 | |
| 98S57105000000 | FRAMEWORK FOR INSPECT CALIBRATION FORT SMOOTH 10 | 1 | |
| 98S57105001000 | FRAMEWORK FOR INSPECT CALIBRATION FORT SMOOTH 10 | 1 | |
| 98V27208001000 | Rudder servo control support frame | 3 | |
| 99A53107283000 | AIRBUS A330 REFERENCE STANDARD 7075-T7451 ALUMINUM. PART 4 53-40-18-270-801-A-01 - Bulk Cargo Compartment Door Cut-out Lateral Frame at Bulk Door-Fittings, FR67 at STGR37 and FR69 at STGR38, RH, FIGURE 53-40-18-991-015-A. Includes Test Report and Cer... | 2 | |
| 9C1140G03 | PEDESTAL, SUPPORT - TURBINE CENTER FRAME (TCF) GROUND HANDLING (SUPPORT PEDESTAL) (PART OF 9C1208G05) | 1 | |
| 9C2200 | BRACKET SET/FAN FRAME | 1 | |
| 9C2215 | KIT COVERS FRAME FAN HUB | 1 | |
| 9C3023 | CLOSURE SET. LEAK TEST-TURBINE CENTER FRAME | 1 | |
| 9C3023G01 | CLOSURE SET, LEAK TEST - TURBINE CENTER FRAME | 1 | |
| 9C3023G02 | CLOSURE SET, LEAK TEST - TURBINE CENTER FRAME | 1 | |
| 9C3033G03 | BRACKET, SET - FAN HUB FRAME | 1 | |
| A1-91-455 | SUPPORT FRAME-APU,CONVERSION KIT | 1 | |
| A32030-12 | Main Frame door lock | 5 | |
| A32096-33 | Center Frame Assy | 1 | |
| ACCESS100 | TELESCOPIC LADDER A FRAME | 1 | |
| AD5600 | SWITCHING CONTROL MAINFRAME | 1 | |
| AFK-1014 | Custom Ultrasonic Kit, PART 4 53-10-13 for the WING REAR SPAR - STA 663.75 REAR SPAR BULKHEAD SIDE FRAME FITTING FAIL SAFE STRAP. Kit includes 1 of each AFM-560AT & AFS-0541 Transducers, 1 NDT3312 Reference Standard and 1 ABNC-MD6. Supplied with a waterpr | 1 | |
| AGE16395 | ALIGNMENT FRAME - ADJUSTABLE FLANGE, QUAD HEAT EXCHANGER | 2 | |
| AGSE-E074 | BASE (FRAME) CRADLE | 2 | |
| AMK-4X | Airframe Mechanics Kit (4X Rivet Gun) | 1 | |
| AT380-11 | IMPACT MECHANISM FRAME | 1 | |
| AUB614-004 | CASTER SET FX LOCKER FRAME | 1 | |
| AUB714-001 | FX 6FT LCKR FRAME ONLY 24 SPC | 1 | |
| B27011-62 | FRAME ASSEMBLY - FOR EQUIP HANDLING JACKSCREW | 4 | |
| B49004-11 | DUCT SUPPORT FOR FRAME HANDLE R/I APU | 6 | |
| B71014 | HANDLING FRAME EQUIPMENT -0 C/DUCT RB211-535 | 1 | |
| B71014-130 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 2 | |
| B71014-131 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 2 | |
| B71014-132 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 8 | |
| B71014-133 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 4 | |
| B71014-150 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 1 | |
| B71014-151 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 1 | |
| B71014-152 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 1 | |
| B71014-155 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 1 | |
| B71014-3 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 3 | |
| B71014-5 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 3 | |
| B71014-98 | HANDLING FRAME EQUIPMENT - "C" DUCT, RB211-535 ENGINE | 2 | |
| B71014-99 | FRAME ASSY-C/DUCT | 1 | |
| B71017 | PROOF LOAD FIXTURE -0 ’C’ DUCT FRAME, RB211-535 | 1 | |
| B71017-15 | PROOF LOAD FIXTURE - RB211-535 "C" DUCT FRAME | 2 | |
| B71042 | HANDLING FRAME EQUIPMENT -0 C/DUCT, RB211- 535 | 1 | |
| B71042-154 | HANDLING FRAME EQUIPMENT - ‘‘C’’ DUCT, RB211-535 ENGINE | 13 | |
| B71042-154-M | C DUCT HANDLING FRAME | 1 | |
| B71042-155 | FRAME HANDLE C DUCT | 1 | |
| B71042-156 | FRAME -0 LWR C DUCT | 1 | |
| B71042-184244 | C DUCT FRAME | 1 | |
| B71042-213 | FITTING FRAME C POST | 1 | |
| B71042-220 | FITTING FRAME C POST | 1 | |
| B71042-244 | UPR C-DUCT FRAME ASS | 1 | |
| B71042-246 | FITTING FRAME C POST | 1 | |
| BAH268 | MINI HACKSAW FRAME 6IN TENSION | 1 | |
| BAT-96WHR | BAT-96WHR;Replacement battery 96WH high current ONA 1000 or 800 transport mainframe | 1 | |
| BH9011011 | POWER-PRO 18 BT FRAME RACK | 1 | |
| BL52563 | FRAME TO CTL FITTING DISPLACEMENT TOOL | 1 | |
| BLAC00 | Blank Accessory Coyote Tan Frame/Coyote Tan Gate | 1 | |
| BLAC1 | Blank Accessory Blue Frame/Bright Gate | 1 | |
| BLAC2 | Blank Accessory Green Frame/Bright Gate | 1 | |
| BLAC3 | Blank Accessory Red Frame/Bright Gate | 1 | |
| BLAC4 | Blank Accessory Purple Frame/Bright Gate | 1 | |
| BLAC5 | Blank Accessory Black Frame/Bright Gate | 1 | |
| BLAC55 | Blank Accessory Black Frame/Black Gate | 1 | |
| BLACFF | Blank Accessory Field Green Frame/Field Green Gate | 1 | |
| BLMP5 | Blank Mini-Pear Black Frame/Bright Gate | 1 | |
| BLMP55 | Blank Mini-Pear Black Frame/Black Gate | 1 | |
| BLPUHSTPC-11 | BLACK BASE FRAME | 1 | |
| C-LGF 50 | LANDING GEAR FRAME CRANE FOR TWW75E2 | 1 | |
| C5UNFBERT | C5UNFBERT;Unframed Bert Test Option | 1 | |
| C5UNFBERT-T30 | C5UNFBERT-T30;Unframed Bert Timed Option | 1 | |
| C5UNFBERT-T30-U1 | C5UNFBERT-T30-U1;Unframed Bert Timed Option Field Upgrade | 1 | |
| C5UNFBERT-U1 | C5UNFBERT-U1;Unframed Bert Option Field Upgrade | 1 | |
| C71026-1 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION ENGINE FAN COWL | 10 | |
| C71026-8 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION ENGINE FAN COWL | 5 | |
| C71027-1 | Installation/Removal Frame Equipment - Inlet Cowl | 13 | |
| C71033 | INSTALLATION/REMOVAL FRAME ASSEMBLY - INLET COWL | 1 | |
| C71033 | Installation/Removal Frame Assembly - Inlet Cowl | 1 | |
| C71033-1 | REMOVAL /INSTALLATION FRAME EQUIPMENT - INLET COWL, CFM LEAP-1B ENGINE (CE) | 8 | |
| C78018-12 | C-FRAME | 1 | |
| C78018-34 | C-FRAME | 1 | |
| C78018-35 | C FRAME COLLAR | 1 | |
| C78018-40 | C FRAME LIFT LUG | 1 | |
| C78018-52 | C FRAME ASSEMBLY | 2 | |
| CAUNFBERT | CAUNFBERT;Unframed Bert for 400G Module Test Option | 1 | |
| CAUNFBERT-T1Y | CAUNFBERT-T1Y;Unframed Bert for 400G Module 1 year Timed Option | 1 | |
| CAUNFBERT-T30 | CAUNFBERT-T30;Unframed Bert for 400G Module 30 day Timed Option | 1 | |
| CAUNFBERT-T3Y | CAUNFBERT-T3Y;Unframed Bert for 400G Module 3 year Timed Option | 1 | |
| CAUNFBERT-U1 | CAUNFBERT-U1;Unframed Bert for 400G Module Test Option - Field Upgrade | 1 | |
| CE001380-0001 | Fixed Frame reerence tool | 1 | |
| CEUNFBERT-FL | CEUNFBERT-FL;Unframed Bert Floating Option | 1 | |
| CP30045 | ADAPTOR - COMBUSTION CASE MN MODULE TO MODULE LIFTING FRAME | 1 | |
| CP30087 | VERTICAL LIFT SLING MODULE ADAPTOR FRAMES | 1 | |
| CP30341-2 | PARKING / SLINGING FRAME - COLD THRUST REVERSER | 1 | |
| CP30343-4 | NOSE COWL TURNOVER & PARKING FRAME | 2 | |
| CP30343/4 | NOSE COWL TURNOVER & PARKING FRAME | 2 | |
| CP30367 | ADAPTOR-IP COMPRESSOR LIFTING FRAME OR PARKING TROLLEY | 1 | |
| CP30432/2 | BASIC ASSEMBLY FRAME | 1 | |
| CP30448-2 | LIFTING/TURNOVER PARKING FRAME (FRONT) FOR FANCASE - RB211-535/535E4 | 1 | |
| CP30448/2 | LIFTING/TURNOVER PARKING FRAME (FRONT) FOR FANCASE - RB211-535/535E4 | 1 | |
| CP30449-2 | LIFTING/TURNOVER PARKING FRAME (REAR) FOR FANCASE - RB211-535/535E5 | 1 | |
| CP30449/2 | LIFTING/TURNOVER PARKING FRAME (REAR) FOR FANCASE - RB211-535/535E5 | 1 | |
| CP30508-1 | MOUNTING RING- NOSE COWL PARKING FRAME - RB211-534 | 1 | |
| CP30508/1 | MOUNTING RING- NOSE COWL PARKING FRAME - RB211-534 | 1 | |
| CP30509 | MOUNTING RING- NOSE COWL PARKING FRAME - RB211-534 E4 | 1 | |
| CP30522-2 | THRUST REVERSER HANDLING FRAME LH & RH DUCTS RB211-535C/E4 | 3 | |
| CP30522/2 | THRUST REVERSER HANDLING FRAME LH & RH DUCTS RB211-535C/E4 | 3 | |
| CP30530 | SUNSTRAND IDG SLING FRAME ADAP FOR ENGINE INSTALLED AIRCRAFT - RB211-535 | 3 | |
| CP30542 | HANDLING FRAMES REAR HP COMP SHAFT & CONES - RB211-22B,524,535C,535E4 | 1 | |
| CP30807-2 | FRAME - REMOVE/INSTALL CHUTED MIXER | 1 | |
| CPSCH4275 | PROOF LOAD FRAME ASSY FOR STAND CP SCH 0250 | 1 | |
| CSC-E1-FR | CSC-E1-FR;Smartclass E1 Frame Relay Sw option Software | 1 | |
| CSC-TPSVW-CU-ENC | CSC-TPSVW-CU-ENC;SmartClass TPS VDSL/Copper Mainframe w/ WiFi | 1 | |
| CSET | C-RIVET SET (FRAME ONLY) | 1 | |
| D2557134600400 | FRAME ASSY-DECOMPRESSION | 1 | |
| DRT69400 | SPANNER - SHACKLE / AIRFRAME PIN NUT | 2 | |
| DRT69401 | REACTOR - SHACKLE TO AIRFRAME PIN | 1 | |
| DR_SM-8915662 | LIFTING TOOL BHGE DR_SM-8915662 FOR FRAME SYNTHETIC OIL COOLER SIF0011494 SPECIAL TOOL FOR LIFTING OIL COLLER | 1 | |
| EBACKPACK-CASE1 | EBACKPACK-CASE1;Backpack/large soft carrying case for TB/MTS mainframes and ONA-800 | 1 | |
| EDDY CURRENT TURBINE REAR FRAM | FRAME INSPECTION KIT | 1 | |
| EM8000E-ENC | EM8000E-ENC;MTS-8000E V2 Mainframe with Standard Power | 1 | |
| EM8000EHP-ENC | EM8000EHP-ENC;MTS-8000E V2 Mainframe preconfigured for High Power | 1 | |
| EP63640-CAR | PROTECTOR FRAME | 1 | |
| ESTICKERNORF | ESTICKERNORF;Sticker NO RF positionned on the mainframe | 1 | |
| EUPP125PM-10 | EUPP125PM-10;Pack of 10 1.25 mm UPP adapter for PM mainframe option | 1 | |
| EXSH670−31014−1 | Calibration reference standard pressure bulkhead machined frames FS693.00 and FS847.00 contains subsurface electrical discharge machined notches. (Bombardier Inc.) | 1 | |
| EZRXL3300-5 | REPLACEMENT PLASTIC FRAME | 1 | |
| F532-R1060-000W2300-01 | SET OF DRILLING FIXTURES FOR FRAME SHELL MDCD-HIN | 1 | |
| F532-R1811-000W6400-01 | INSTALLATION DEVICE FRAMES SEC.13 /14/ | 1 | |
| F712-01006-000W1800-01-301 | ENGINE DUMMY CRADLE FRAME | 1 | |
| FAT00317-ZBF | 10 PLY BLACK FRAME BLUE LENS | 1 | |
| FAT00317-ZSS | 10 PLY BLACK FRAME SILVER LENS | 1 | |
| FATV026-ZSM | THE DON BLACK FRAME SMOKE LNS | 1 | |
| FIL8500 | A330/A340 U/C TROLLEY PROOF LOAD FRAME FOR FIL8100 | 1 | |
| FMI25BKGNS1 | OSCAR BLK FRAME GREEN 180LENS | 1 | |
| FMIRXDISPKIT | PRESCRIPTION FRAMES DISPLAY KI | 1 | |
| FPE2023PK3 | OPEN FRAME 8PK W/COVERS | 1 | |
| FT8 | CRIMPER FRAME | 3 | |
| G03 | SET, LIFTING BRACKET - TURBINE CENTER FRAME | 1 | |
| G26016 | HOIST FRAME EQPT-UPPER & LOWER RUDDER P.C.P. AND P.C.M. | 1 | |
| G27016 | HOIST FRAME EQPT -0 UPPER & LOWER RUDDER, P.C.P. | 1 | |
| G27016-68 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL PACKAGE (PCP) AND POWER CONTROL MODULE (PCM) (CE) | 1 | |
| G27016-69 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL PACKAGE (PCP) AND POWER CONTROL MODULE (PCM) (CE) | 5 | |
| G27016-70 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL PACKAGE (PCP) AND POWER CONTROL MODULE (PCM) (CE) | 1 | |
| G27075-1 | HOIST FRAME EQUIPMENT - UPPER AND LOWER RUDDER POWER CONTROL ASSEMBLY (PCA) REMOVAL/INSTALLATION (CE) | 2 | |
| G71043-1 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION ENGINE FAN COWL | 5 | |
| GEFQAP270 | TURBINE MID FRAME AFT FLANGE ULTRASONIC | 1 | |
| GSE55936 | REACTOR - TORQUE, PINTLE FRAME PIN BLG | 1 | |
| H250X-CRATE-1 | X SERIES TOP FRAME CRATE | 1 | |
| HFK02 | HYCOM Flow Control Unit, 1065 mm L, Stainless Steel Frame, 800 mm W, 1200 mm H, 4 m Hose | 8 | |
| HP66000 | DC MAINFRAME | 1 | |
| HS18A | HACKSAW FRAME | 1 | |
| HS8A | FRAME, HACKSAW | 1 | |
| HSG319 | HACKSAW FRAME | 3 | |
| HST3000-CCWA | HST3000-CCWA;Service HST Mainframe Certified Cal with Adjustment | 1 | |
| HST3000-FRC | HST3000-FRC;Fixed Rate Repair and Calibration for HST 3000 Mainframe only | 1 | |
| HST3000-FRR | HST3000-FRR;Service Flat Price Repair - HST3000 - All Mainframes | 1 | |
| HST3000C-NG2-1-DF-ENC | HST3000C-NG2-1-DF-ENC;HST-3000 Mainframe Optrex LCD Copper - Encore | 1 | |
| HT-530-WW | AIRFRAME CLEANING WAND | 2 | |
| HU 17170-4 | FRAME, ACCESSORIES LIFTING | 1 | |
| HU31468-01 | FRAME ACCESSORIES LIFTING | 1 | |
| HU55067 | TRENT 700 LP FANCASE TURNOVER FRAME | 1 | |
| HU55067-5 | FRONT FANCASE HANDLING FRAME | 1 | |
| HU55108 | CNA LIFTING FRAME TOOL | 8 | |
| HU55123 | LP COMPRESSOR CASE, FRONT HANDLING FRAME | 1 | |
| HU55143 | TURNOVER FRAME (REAR) LP COMPRESSOR CASE | 1 | |
| HU55143-6 | TIP CLEARANCE METER - FAN FRAME/FANBLADE | 1 | |
| HU55340 | LP COMPRESSOR CASE, REAR HANDLING FRAME | 1 | |
| HU87500 | Precooler Duct frame | 3 | |
| HU88000-REP | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION ENGINE FAN COWL | 1 | |
| HU89020-2 | PARKING FRAME - AIR INTAKE COWL - SEE HU89022-2 | 12 | |
| HX23 | Pneumatic Open Frame Crimp Tool - HX4 Equivalent | 2 | |
| HX3 | Open Frame Crimp Tool for Use with Interchangable X Dies | 4 | |
| HX3-530 | Special HX3 Frame with X530 Die Set | 1 | |
| HX33 | Open Frame Pneumatic Crimp Machine | 2 | |
| HX4 | CRIMP TOOL FRAME | 13 | |
| HXE4AB | Battery Powered Open Frame Crimp Tool - 1.5 Ton | 1 | |
| HXE4AC | Battery Powered Open Frame Crimp Tool with a Pre-Tensioned Pushrod - 1.5 Ton | 2 | |
| HXE4B | Battery Powered Open Frame Crimp Tool - 1.5 Ton | 1 | |
| HXE4C | Battery-Powered Open Frame Crimp Tool - 1.5 Ton | 2 | |
| IM31A11 | MACHINED FRAME | 1 | |
| J060157-1 | SHORING - DC9/MD80 CANTED FRAME-TAIL | 1 | |
| J201P01 | NUT SELF LOCKING FOR FAN FRAME INSTL-BEARING | 1 | |
| J27016-54 | CRADLE FRAME | 1 | |
| JLV430 | CARPENTER SQR FRAME 8x12 STL | 1 | |
| K0059224 | EXTENDED FRAME ANCHORING | 1 | |
| K12003-1 | FILL TOOL – HYDRAULIC STRUT, SEMI LEVER GEAR STANDARD PRACTICES – AIRFRAME | 4 | |
| K21031-1 | ALIGNMENT FRAME - ADJUSTABLE FLANGE, QUAD HEAT EXCHANGER | 2 | |
| K21031-29 | ALIGNMENT FRAME - ADJUSTABLE FLANGE, QUAD HEAT EXCHANGER | 2 | |
| K23006540 | Ultrasonic Instrument Omniscan MX2 Mainframe (NDT) OMNI2-P-PA16:128-E-EN | 1 | |
| K29002-70 | FRAME INTERFACE ASSY | 1 | |
| K32012-6 | BRACE FRAME ASSY | 1 | |
| K32012-83 | Brace frame assy | 1 | |
| KATSPFMRD | RED TOOLSTRGE PICTR FRAME MAG | 1 | |
| KMT0301 | C-FRAME RAM KIT | 1 | |
| L-5616 | 45-170 Stripmaster™ Replacement Frame (Blades Sold Separately) | 2 | |
| L-5617 | 45-171 Stripmaster™ Replacement Frame (Blades Sold Separately) | 2 | |
| L-9038 | Custom Stripmaster Frame 16-30 AWG | 2 | |
| L-9039 | Custom Stripmaster Frame 10-14 AWG | 2 | |
| L131M0002101 | WEIGHING BRACKET, FRAME | 1 | |
| M2100-PROD-NOPT | M2100-PROD-NOPT;MAP-2100 for production with unframed BERT no optics | 1 | |
| M22520-1-02 | CRIMPING TOOL FRAME | 18 | |
| M22520-1-04 | CRIMPING TOOL FRAME | 10 | |
| M22520-2-01 | CRIMPING TOOL - FRAME | 18 | |
| M22520-2-02 | CRIMPING TOOL FRAME | 11 | |
| M22520-5-05 | CRIMPING TOOL FRAME | 2 | |
| M22520/1-01 | CRIMPING TOOL FRAME | 26 | |
| M22520/10-01 | ENGARZADORAS / HERRAMIENTAS DE ENGARCE OPEN FRAME HAND CRIMP TOOL HX3 | 1 | |
| M22520/7-01 | CRIM TOOL FRAME | 9 | |
| MAP-200A03 | MAP-200A03;MAP-280 8-Slot Mainframe 19Inches Rackmount Ears | 1 | |
| MAP-200A10 | MAP-200A10;MAP-200 3-Slot Mainframe 19Inches Rack-Mount Ears | 1 | |
| MAP-330A-B | MAP-330A-B;3-Slot 3U Half-19in Benchtop Mainframe | 1 | |
| MAP-330AB-B | MAP-330AB-B;3-Slot 3U Half-19in Basic Mainframe | 1 | |
| MAP-330AD-B | MAP-330AD-B;3-Slot 3U Half-19in Benchtop Mainframe with Touchscreen | 1 | |
| MAP-330AX-B | MAP-330AX-B;3-Slot 3U Half-19in Rackmount Mainframe | 1 | |
| MAP-330CH | MAP-330CH;3-Slot 3U Half-19in Basic Mainframe no Controller | 1 | |
| MAP-380A-B | MAP-380A-B;8-Slot 3U 19in Benchtop Mainframe | 1 | |
| MAP-380AX-B | MAP-380AX-B;8-Slot 3U 19in Rackmount Mainframe | 1 | |
| MAP-380AXR-B | MAP-380AXR-B;8-Slot 3U 19in Reverse Rackmount Mainframe | 1 | |
| MAP-380CH | MAP-380CH;8-Slot 3U 19in Basic Mainframe no Controller | 1 | |
| MAP-380RCH | MAP-380RCH;8-Slot 3U19in Reverse Basic Mainframe no Controller | 1 | |
| MAP-BD-300UPG-SM-COM-3 | MAP-BD-300UPG-SM-COM-3;Commscope MAP-300 mORL SM Bi-di upgrade package - 2x2 - license - mainframe | 1 | |
| MAP-PACK-MAP230 | MAP-PACK-MAP230;MAP-230 Mainframe Empty Shipping box | 1 | |
| MAP-PACK-MAP280 | MAP-PACK-MAP280;MAP-280 Mainframe Empty Shipping box | 1 | |
| MAP-PACK-MAP330 | MAP-PACK-MAP330;MAP-330 Rackmount Mainframe Empty Shipping box - Convertible to benchtop | 1 | |
| MAP-PACK-MAP380 | MAP-PACK-MAP380;MAP-380 Rackmount Mainframe Empty Shipping box - Convertible to benchtop | 1 | |
| MAR95709 | FRAME CAP | 1 | |
| MAR95856 | FRAME CAP | 1 | |
| MAR95972 | FRAME LOCK NUT | 1 | |
| ME15-6042PKIT | Tripod Jack - Main (frame 26 L&R) | 1 | |
| ME7-4847PKIT | Tripod Jack - Rear (frame 45) | 1 | |
| MIT144A2400-1 | MISCELLANEOUS TOOL: 737NG 663.75 FRAME DRILL AND REAM KIT | 1 | |
| MLGFA320 | RAHMEN - MAIN LANDING GEAR CHANGING FRAME | 5 | |
| MS3198-1 | CRIMPING TOOL - FRAME | 1 | |
| MTS/TB2000-XX-KC | MTS/TB2000-XX-KC;ISO KEY Cal MTS/TB-2000 Mainframe incl. one OTDR Module | 1 | |
| MTS/TB2000-XX-TC | MTS/TB2000-XX-TC;ISO TOP Cal MTS/TB-2000 Mainframe incl. one OTDR Module | 1 | |
| MTS/TB4000-FRR | MTS/TB4000-FRR;Fixed Rate Repair and Calibration MTS/TB-4000 Mainframe | 1 | |
| MTS/TB4000-XX-KC | MTS/TB4000-XX-KC;ISO KEY Cal MTS/TB-4000 Mainframe incl. one OTDR Module | 1 | |
| MTS/TB4000-XX-TC | MTS/TB4000-XX-TC;ISO TOP Cal MTS/TB-4000 Mainframe incl. one OTDR Module | 1 | |
| MTS/TB6000/A-CCWA | MTS/TB6000/A-CCWA;Service Certified Calibration with Adjustments for MTS/TB6000 or MTS/TB6000A Mainframe | 1 | |
| MTS/TB6000/A-FRR | MTS/TB6000/A-FRR;Fixed Rate Repair and Calibration MTS/TB-6000 Mainframe | 1 | |
| MTS/TB8000-CCWA | MTS/TB8000-CCWA;Service Certified Calibration W Adjustments for MTS/TB8000 Mainframe | 1 | |
| MTS/TB8000-FRR | MTS/TB8000-FRR;Fixed Rate Repair and Calibration MTS/TB-8000 Mainframe | 1 | |
| N3300A | DC ELECTRONIC LOAD MAIN FRAME,1800W,6SLO - (1LQK8) | 1 | |
| NSC-100 | NSC-100;Mainframe | 1 | |
| NSC-100A | NSC-100A;Mainframe - no WiFi HW | 1 | |
| NSC-200 | NSC-200;NSC-200 Mainframe | 1 | |
| NSC-200-ENC | NSC-200-ENC;NSC-200 Mainframe-Encore | 1 | |
| NSC-200A | NSC-200A;NSC-200 Mainframe - no WiFi HW | 1 | |
| OMNI-MX | PHASED ARRAY BASIC MAIN FRAME | 1 | |
| ONA-1000A-MF | ONA-1000A-MF;ONA-1000A Base Mainframe including Soft Case | 1 | |
| ONA-1000A-MF-ENC | ONA-1000A-MF-ENC;ONA-1000A-MF;ONA-1000A Base Mainframe - Encore | 1 | |
| ONA-1000A-MFK | ONA-1000A-MFK;ONA-1000A Base Mainframe special | 1 | |
| ONA-800A-F | ONA-800A-F;OneAdvisor 800 Mainframe Display Wifi BT for Fiber Applications | 1 | |
| ONA-800A-MF-ENC | ONA-800A-MF-ENC;ONA-800A-MF;OneAdvisor ONA-800A Mainframe - Encore | 1 | |
| ONA-800A-MF2-F | ONA-800A-MF2-F;OneAdvisor 800 v2 Mainframe for Fiber Applications | 1 | |
| ONA-800A-MF2-T | ONA-800A-MF2-T;OneAdvisor 800A v2 Mainframe for Transport Applications | 1 | |
| ONA10-BACK | ONA10-BACK;Back Termination for ONA-1000 type mainframe | 1 | |
| ONA10-COVER | ONA10-COVER;ONA-1000 mainframe replacement screen cover | 1 | |
| ONA10-DMC | ONA10-DMC;DMC termination to support additional modules for ONA-1000 mainframe | 1 | |
| ONA10-HARDCASE | ONA10-HARDCASE;ONA-1000 mainframe Hard Case | 1 | |
| ONA10-SOFTCASE | ONA10-SOFTCASE;ONA-1000 mainframe Soft Case | 1 | |
| ONMS-EOTDR-TC | ONMS-EOTDR-TC;ISO TOP Cal for EOTDR used in ONMS Mainframe | 1 | |
| ONX-220-42-85-MF-ENC | ONX-220-42-85-MF-ENC;One Expert 220 - Mainframe 42/85 MHz-Encore | 1 | |
| ONX-220-65-204-MF-ENC | ONX-220-65-204-MF-ENC;One Expert 220 - Mainframe 65/204 MHz-Encore | 1 | |
| ONX-580-CAL | ONX-580-CAL;Service Certified Calibration ONX-580 Test Module and Mainframe | 1 | |
| ONX-580-FRR | ONX-580-FRR;Fixed Rate Repair and Calibration ONX-580 Test Module and Mainframe | 1 | |
| ONX-580-MF-CAL | ONX-580-MF-CAL;Service Certified Calibration ONX-580 Mainframe | 1 | |
| ONX-580-MF-FRR | ONX-580-MF-FRR;Fixed Rate Repair and Calibration ONX-580 Mainframe | 1 | |
| ONX-580-TC | ONX-580-TC;ISO TOP Cal ONX-580 Test Module and Mainframe | 1 | |
| ONX-580A-ENC | ONX-580A-ENC;OneExpert - ONX-580A Mainframe - Encore | 1 | |
| ONX-580P-ENC | ONX-580P-ENC;OneExpert - ONX-580P Mainframe - Encore | 1 | |
| ONX-6XX-CAL | ONX-6XX-CAL;Service Certified Calibration ONX-6xx D3 Modem and Mainframe | 1 | |
| ONX-6XX-FRR | ONX-6XX-FRR;Fixed Rate Repair and Calibration ONX-6xx D3 Modem and Mainframe | 1 | |
| ONX-CATV-MF-ENC | ONX-CATV-MF-ENC;Encore - OneExpert-ONX-CATV Mainframe - Refurbished | 1 | |
| ONX580-MF-CON-PKG | ONX580-MF-CON-PKG;ONX-580 Mainframe Only - Consolidated | 1 | |
| ONX580-T-ENC | ONX580-T-ENC;OneExpert DSL - ONX-580 Mainframe - Encore | 1 | |
| OPAC1 | Omega Accessory Blue Frame/Bright Gate | 1 | |
| OPAC2 | Omega Accessory Green Frame/Bright Gate | 1 | |
| OPAC3 | Omega Accessory Red Frame/Bright Gate | 1 | |
| OPAC4 | Omega Accessory Purple Frame/Bright Gate | 1 | |
| OPAC5 | Omega Accessory Black Frame/Bright Gate | 1 | |
| OPMP5 | Omega Mini-Pear Black Frame/Bright Gate | 1 | |
| OTC6730 | C FRAME ADAPTER KIT | 1 | |
| OTC6736 | C FRAME FORCING SCREW ASSY | 1 | |
| Olympus HSMT-Flex Manual Scanner | Olympus HSMT-Flex Manual Scanner - ToFD & PA Scanner, Folding frame to optimise probe contact, Supports up to 4 probes on pipes, Supports up to 8 probes on flat surface | 1 | |
| Olympus ToFD (HST Lite) Scanner | Olympus ToFD (HST Lite) Scanner - ToFD scanner, Circumferential scans performed with two TOFD probes on pipes 4.5 in. (114.3 mm) OD, Light aluminium frame | 1 | |
| PROD-SERV-DELV | PROD-SERV-DELV;Product Support Services and NRE delivered over a specified time frame | 1 | |
| PS-330W24V | PS-330W24V;Replacement Power supply 330W 24V for ONA-1000 mainframe | 1 | |
| PUL4010 | Frame Rack Unibody Clamp | 1 | |
| PUL4021 | Frame Rack Dyna-Mo #1 | 1 | |
| PUL5710 | BLOCK DOLLY FOR FRAME RAIL | 1 | |
| R1278A | Ionic Systems 240 V Quick Transfer Pump And Frame Assembly | 2 | |
| R537-74201-000W8300-01 | C-FRAME-HOIST FOR FLOOR GRID S13 | 1 | |
| R537-74201-000W8310-01E00 | LIFTING FRAME FOR FLOOR SEC 13 | 1 | |
| R537-B1170-000W8400-01 | SUPPORT FUSELAGE SEC13/14 - CONTOUR FRAME C18-C26.4 | 1 | |
| R537-B1300-000W6400-02-01 | FRAME STIFFENING DEVICE C20-C33 | 1 | |
| R537-B1300-000W6400-02-02 | INSTALLATION DEVICE FRAME SUPPORT C20 - C33 | 1 | |
| RAD64051101 | Radnor 64051101 Visitor Spec Series Clear Frame with Clear Polycarbonate Lenses Safety Glasses | 1 | |
| RBEL131M-0002-101 | Weighing Bracket, Frame | 2 | |
| RBI8050T | Mechanics/Technicians Basic Tool Kit (Airframe/Engines) | 1 | |
| RCFK1001 | HYD C-FRAME KIT | 1 | |
| RCTL-01-D534-80035-000-001 | Trimming and drilling tool Windows frame sc.18 | 1 | |
| RHCK1002 | HYDRAULIC CYLINDER / C-FRAME | 2 | |
| RKD4101-3D | CENTER FRAME DRIVER DIE | 1 | |
| RKD4101-3R | CENTER FRAME RECEIVER DIE | 1 | |
| RKD4101-4R | CENTER FRAME RECEIVER DIE | 1 | |
| RKD4101-6D | CENTER FRAME DRIVER DIE | 1 | |
| RKD4101-6R | CENTER FRAME RECEIVER DIE | 1 | |
| RKD4101-8D | CENTER FRAME DRIVER DIE | 1 | |
| RKD4101-8R | CENTER FRAME RECEIVER DIE | 1 | |
| RKD4103-4D | CENTER FRAME DRIVER DIE | 1 | |
| RKD4103-6D | CENTER FRAME DRIVER DIE | 1 | |
| RKD5080D | CENTER FRAME DRIVER DIE | 1 | |
| RKD5080R | CENTER FRAME RECEIVER DIE | 1 | |
| RKH0300 | C-FRAME RAM KIT | 4 | |
| RKH0301 | C-FRAME RAM KIT | 3 | |
| RKH0302 | C-FRAME RAM KIT | 1 | |
| RRT054317 | A-FRAME PROTECTOR | 4 | |
| RRT077164-1 | The inner fan casing is close to the ladder frame | 2 | |
| RRT115161 | FAN BLADE SCANNING FRAME | 1 | |
| RSE1113 | LIFTING FRAME/SLINGS WITH STORAGE DOLLY FOR REMOVAL/INSTALLATION ENGINE FAN COWL | 20 | |
| RT115-015 | PARKER BAYSIDE: RT SERIES STEALTH MULTIDRIVE GEARBOX, RIGHT ANGLE, HOLLOW SHAFT, 115MM FRAME SIZE, 15:1 RATIO, STANDARD BACKLASH | 1 | |
| S47101 | RACK FRAME, DOUBLE-BAY | 1 | |
| S5317000220402 | SPLICE FRAME | 1 | |
| S5317000220502 | SPLICE FRAME | 1 | |
| SBA300-57-6052 | FRAME 40 INSPECTION REPAIR KIT TOOL | 1 | |
| SBA300-57-6086 | A300 FRAME 47 REAM/SPOTFACE KIT TOOL | 1 | |
| SCTPS-AB | SCTPS-AB;Smartclass TPS VDSL Mainframe ANX A/B VDSL 30a | 1 | |
| SCTPS-AB-CU | SCTPS-AB-CU;Smartclass TPS VDSL/Copper Mainframe ANX A/B - VDSL 30a | 1 | |
| SCTPS-BONDED | SCTPS-BONDED;Smartclass TPS VDSL Mainframe Bonded 17a BONDED | 1 | |
| SCTPS-BONDED-CU | SCTPS-BONDED-CU;SmartClass TPS VDSL/Copper Mainframe 17a BONDED | 1 | |
| SCTPS-BONDED-CU-TELMEX | SCTPS-BONDED-CU-TELMEX;SmartClass TPS VDSL/Copper Mainframe 17a BONDED-TELMEX | 1 | |
| SCU-1800-REV-MF | SCU-1800-REV-MF;SCU-1800 Mainframe Fwd and Reverse Sweep Capable - F Connectors - ROHS | 1 | |
| SCU-1800-REV-MF-ENC | SCU-1800-REV-MF-ENC;SCU-1800 Mainframe Fwd and Reverse Sweep Capable-Encore | 1 | |
| SD12572-1 | RIGGING KIT AIRFRAME (INCLUDES: SD12567-1, SD12568-1 AND SD12571-1= SD1542-1, SD10543-1, SD10544-1) | 1 | |
| SEY11090 | HYDRAULIC C FRAME | 1 | |
| SHIPPING | Cutting Frame and load out | 1 | |
| SK34477-101 | TOOL NET POCKET FRAME HOLE TEMPLATE | 1 | |
| SK34477-103 | TOOL NET POCKET FRAME HOLE TEMPLATE | 1 | |
| SK601R-30001 | FRAME, CAP ANGLE | 2 | |
| SK601R-30001 | FRAME, CAP, ANGLE | 2 | |
| SNP1125 | License Plate Frame | 1 | |
| SPL-14544 | INSTALLATION/REMOVAL FRAME EQUIPMENT - INLET COWL, | 1 | |
| SPL-15012 | BRACKET, LIFTING - FRAME, TURBINE CENTER (TCF) | 1 | |
| STD-REPAIR-AGREEMENT | STD-REPAIR-AGREEMENT;Standard repair charges for Key Account Repair/Frame Agreement | 1 | |
| T-LST60134 | HACKSAW FRAME CLOSED GRIP | 1 | |
| T008188 | 700 COCKPIT WINDOW FRAME KIT | 1 | |
| T008188FAS-1 | 700 Cockpit Window Frame Bucking Bar | 1 | |
| TB2T-MAIN-P1 | TB2T-MAIN-P1;T-BERD 2000 MAINFRAME PACKAGE | 1 | |
| TE12A | WRENCH,TORQUE;DIAL;0.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;DIAL INDICATOR;SINGLE END 0.375";SINGLE END EXTERNAL SQUARE; STEEL;850 RIGID FRAME END DRIVE; | 4 | |
| TE1FUA | WRENCH,TORQUE;DIAL;0.0 INCH-POUNDS MIN AND 15.0 INCH-POUNDS MAX;DIAL INDICATOR;SINGLE END 0.250";SINGLE END EXTERNAL SQUARE; STEEL;RIGID FRAME END DRIVE;|9.906";CASE;0.25 INCH-POUNDS;MEMORY INDICATOR; CHROMIUM;PROFESSIONAL/INDUSTRIAL ASSOCI | 2 | |
| TEMOD-FO-RECSVC | TEMOD-FO-RECSVC;Fiber Product Services and NRE delivered over a specified time frame | 1 | |
| TEMOD-PROD-DELV | TEMOD-PROD-DELV;Metro Product Services and NRE delivered over a specified time frame | 1 | |
| TH548 | DIE SETS FOR CRIMPER FRAME FT8 | 2 | |
| TH554 | DIE SETS FOR CRIMPER FRAME FT8 | 2 | |
| TM100GA-ENC | TM100GA-ENC;100G Transport Module for ONA-1000 type mainframe - Encore | 1 | |
| TM400GA-ENC | TM400GA-ENC;TM400GA;400G Transport Module for ONA-1000 type mainframe - Encore | 1 | |
| TN619396 | FRAME 1 INCLINOMETER PLATE | 1 | |
| TO-20-040 | SPRING SCALE - CAPACITY 25 DAN (60 LBF) CH 20 STANDART PRACTICA AIRFRAME | 1 | |
| TP1012 | DIE SETS FOR CRIMPER FRAME FT8 | 2 | |
| TP1049 | DIE SETS FOR CRIMPER FRAME FT8 | 2 | |
| TP1319 | DIE SETS FOR CRIMPER FRAME FT8 | 2 | |
| TP1324 | DIE SETS FOR CRIMPER FRAME FT8 | 2 | |
| TP1488 | DIE SETS FOR CRIMPER FRAME FT8 | 2 | |
| TP731 | DIE SETS FOR CRIMPER FRAME FT8 | 2 | |
| TRI-DSP-1G-D31-MF-ENC | TRI-DSP-1G-D31-MF-ENC;1G DSP Mainframe D3.1 1.25GHz - Encore | 1 | |
| TRI-DSP-360-MF-ENC | TRI-DSP-360-MF-ENC;TRI-DSP-360-MF;360 DSP Mainframe D3.1 1.25GHz - Encore | 1 | |
| TRI-LKG-SEEKER-X-MF-ENC | TRI-LKG-SEEKER-X-MF-ENC;TRI-LKG-SEEKER-X-MF;Seeker-X Field Meter Mainframe - Encore | 1 | |
| UDT3 | Bench Press Style Open Frame Crimp Tool for Use with X DIES | 2 | |
| UDT5 | Bench Press Style Open Frame Crimp Tool For "Y" Dies | 1 | |
| WYXACPEA06 | PEAK SILVER LENS MBLACK FRAME | 1 | |
| lC5932 | FIXTURE, LIFT-TURBINE MID FRAME, VERTICAL | 1 | |
| lC6847 | SLING, FRAMES AND CASINGS-LIFTING, VERTICAL | 1 | |
| lC6892 | PUSHER, BOLT-FRONT FRAME T G B FWD, MTG BRACKET | 1 | |
| lC6958 | GAGE, CONCENCTRICITY - TURB. MID FRAME | 1 | |
| 98A27407568001 | STRUT,DISTANCE,FRAME 91,USE TO HOLD HORI | 4 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
