| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1129053 | BARREL | 1 | |
| 1535001 | BARREL | 1 | |
| 275A2502-1 | BARREL | 1 | |
| 365A91-0057-79 | BARREL | 1 | |
| 65B01505-2 | Barrel | 1 | |
| 81269100 | BARREL | 1 | |
| 882707-1 | BARREL | 1 | |
| 98D27504111202 | BARREL | 1 | |
| 98F27208691000 | BARREL | 9 | |
| 98L32104015204 | BARREL | 1 | |
| 98L32104016204 | BARREL | 1 | |
| AN155-32S | BARREL | 1 | |
| AT2050-3 | BARREL | 1 | |
| ATI520BR2 | BARREL | 1 | |
| B32006-17 | BARREL | 1 | |
| GA64574-10 | BARREL | 1 | |
| GS20842-1 | BARREL | 14 | |
| GS208421 | BARREL | 14 | |
| GS23435-1 | BARREL | 16 | |
| H46213 | BARREL | 1 | |
| MV-10 | BARREL | 1 | |
| PH3045-3 | BARREL | 1 | |
| PH3050-3 | BARREL | 1 | |
| Q21948 | BARREL | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98L27208453000 | SERVO TURN-BARREL,R I,RUDDER SERVO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27209010000 | ADAPTER ADAPTER-TURN BARREL, LOWER RUDD (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27209015000 | ADAPTER ADAPTER-TURN BARREL,UPPER RUDDE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98V27208778000 | TURN BARREL SERVO (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GS20842-1 | PRESSURIZER BARREL | 1 | |
| (CALIB) RRT088893-1 | Bolt & Barrel Nut (CALIBRATION) (CALIBRATION) | 1 | |
| 1026-CT | OPEN BARREL CRIMP | 1 | |
| 11-11-0068 | Barrel Form Punch | 1 | |
| 11-11-0069 | Barrel Form Anvil | 1 | |
| 1100-1590-G/D-165 | GUN BARREL DRILL #21 | 1 | |
| 1100-1890-G/D-165 | GUN BARREL DRILL #12 | 1 | |
| 1100-2460-G/D-165 | GUN BARREL DRILL - D | 1 | |
| 1100-2500-G/D-165 | GUN BARREL DRILL E-2500-1/4 | 1 | |
| 11001A | RIVET BUSTER | GROOVED BARREL WITH LOCK SPRING | SWAN NECK HANDLE | 11 | 1 | |
| 1168-505 | CLAMP AND BARREL ASSY | 1 | |
| 14W1031-001 | INLET INNER BARREL PROTECTION | 1 | |
| 200.0055 | GREASE BARREL | 1 | |
| 200.2 | UGT BARREL CART | 1 | |
| 252-1230-000 | CRIMP BARREL ADAPTOR | 1 | |
| 25Y239A | SPANNER NOSE GEAR AXLE BARREL RET.NUT | 6 | |
| 270A-2 | AIR HAMMER SHORT BARREL | 3 | |
| 270A-4 | AIR HAMMER LONG BARREL | 2 | |
| 273A2202-1 | BARREL ASSY | 1 | |
| 293W3002-1 | BARREL ASSY | 1 | |
| 314A6111-1005 | INLET-INNERBARREL PAINT COUPONS | 1 | |
| 369F5100ATP1 | BARREL WRENCH SET | 1 | |
| 42557-10 | BARREL LOCK ASSEMBLY | 1 | |
| 4916775-1 | HYD RESERVIOR BARREL GUIDE T/Q ADA | 1 | |
| 4952434-501 | Adapter, Torque, Barrel Guide | 1 | |
| 51C1054-1 | PIN-ASSY-ATTACH HOIST BARREL | 1 | |
| 552714-1 | STUFFER;WIRE;AMP-BARREL;YELLOW | 5 | |
| 552714-2 | STUFFER;WIRE;AMP-BARREL; RED | 1 | |
| 552714-3 | STUFFER;WIRE;AMP-BARREL; WHITE | 1 | |
| 552714-4 | STUFFER;WIRE;AMP-BARREL; BLUE | 1 | |
| 57913-T200 | BARREL ASSEMBLY TOOL | 1 | |
| 6000-2188-16GG/D-165 | THREADED GUN BARREL STUB, 7/32" | 1 | |
| 6000-2344-16GG/D-165-LONG | THREADED GUN BARREL LONG; 15/64" | 1 | |
| 6000-2344-16GG/D-165-STUB | THREADED GUN BARREL 15/64" | 1 | |
| 6270-1 1.55 | EDDY CURRENT PROBE (BARREL NUT) | 1 | |
| 63819-0000 | Molex 63819-0000 Open Barrel Ratchet Crimping Tool | 10 | |
| 6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
| 7-362300019-601 | ADAPTER, TORQUE BARREL SUPPORT, 30MM | 1 | |
| 7011 | BARREL, Stab. Jack Screw Pin Tool | 8 | |
| 11001 | RIVET BUSTER | GROOVED BARREL WITH LOCK SPRING | S | 12 | |
| 68416 | BARREL CYLINDER | 1 | |
| 76907 | 76907 GUIDE CONE AND SUPPORT TOOL LOCKWASHER OF THE FORWARD LANDING GEAR BARREL SCISSORS MIDDLE PIN | 5 | |
| 88656 | Henkel 97207 LOCTITE 10 mL Natural Syringe Barrel Kit | 1 | |
| 88677 | Henkel 97244 LOCTITE 30 mL Natural Syringe Barrel Kit | 1 | |
| 310103 | PPG Semco 310103 1cc Syringe Barrel Flange Plug | 1 | |
| 310307 | PPG Semco 310307 3cc Luer Plastic Slip Syring Barrel | 1 | |
| 311003 | PPG Semco 311003 10cc Syringe Barrel Flange Plug | 1 | |
| 311007 | PPG Semco 311007 10cc Luer Plastic Slip Syring Barrel | 1 | |
| 312007 | PPG Semco 312007 20cc Luer Plastic Slip Syring Barrel | 1 | |
| 312016 | PPG Semco 312016 20cc Luer Plastic Lock Syring Barrel | 1 | |
| 313507 | PPG Semco 313507 35cc Luer Plastic Slip Syring Barrel | 1 | |
| 601820 | BARREL ASSEMBLY | 1 | |
| 720532 | BARREL ASSY | 1 | |
| 726843 | BARREL SET UP TOOL | 1 | |
| 6605670 | Tool, Barrel Nut Removal | 1 | |
| 66051347 | BARREL NUT REMOVAL | 1 | |
| 460007248 | RESERVOIR BARREL SPANNER | 5 | |
| 830006-809-00759-6F | BARREL WRENCH FOR NUT SL61N-6F | 1 | |
| 877600B-5 | MALABAR SKYDROL BARREL TROLLY | 1 | |
| 8776B | MALABAR SKYDROL BARREL TROLLY | 1 | |
| 8G7100G00231 | EXPLOSIVE CAP INSPECTION SAFETY BARREL | 1 | |
| 920698-1-1 | I/B AND 0/B BARREL PUSHER | 1 | |
| 956A6065G01 | Positioner - Fan Disk Barrel Nut | 2 | |
| 956A6071 | KEY- POSITIONER - FAN DISK BARREL NUT | 1 | |
| 956A6071G01 | KEY, POSITIONER -FAN DISK BARREL NUT | 7 | |
| 956A8305 | FIXTURE - BALANCING BARREL - LPT ASSY | 1 | |
| 956A8306 | DOLLY - ASSY / DISASSY - LPT BALANCING BARREL | 1 | |
| 98F27208691000 | TURN-BARREL,RUDDER | 9 | |
| 98F27208691040 | TURN-BARREL, RUDDER short | 1 | |
| 98F27208691042 | TURN-BARREL, RUDDER long | 1 | |
| 98L27203001000 | ADAPTOR RUDDER BARREL | 1 | |
| 98L27208453000 | TURN-BARREL,R I,RUDDER SERVO | 3 | |
| 98L27208453040 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453042 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453044 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453046 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453100 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453102 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453104 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453106 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453108 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453110 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453112 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27208453114 | TURN BARREL ACTUATOR RUDDER VERSTELLWERKZEUG RUDER SERVO | 1 | |
| 98L27209010000 | ADAPTER-TURN BARREL, LOWER RUDDER | 3 | |
| 98L27209015000 | ADAPTER-TURN BARREL,UPPER RUDDER | 4 | |
| 98L57004000000 | TURN BARREL | 1 | |
| 98V27208778000 | TURN BARREL SERVO CTRL R/I | 7 | |
| 98V27208778001 | TURN BARREL SERVO CTRL R/I | 1 | |
| 994-0004 | ADJUSTABLE BARREL STANDOFF | 1 | |
| AC134 | AC134;MAP-Series OPM adaptor Fujikura splice chuck barrel requires AFL holder | 1 | |
| AC920 | AC920;MAP-Series OPM adaptor Replacement barrel for AC913 AC113 AC121 locking | 1 | |
| AC930 | AC930;MAP-Series OPM adaptor Barrel holder AC931 | 1 | |
| AD-21102606 | AD-21102606; Output Conn 2.5mm/5.5mm Barrel ITE Certified | 1 | |
| AD-21165101 | AD-21165101;Pwr Supply Desktop AC Conn-3Pin IEC Output Conn 2.5mm 5.5mm Barrel ITE Certified Isolated Ground | 1 | |
| AGE-01860-401 | COVER-MACHINE GUN BARREL | 1 | |
| AN16-BNC/50-500K | ADAPTOR - 16PIN LEMO (MALE) TO BNC(FEMALE) 50-500KHZ Adaptor, SW Barrel Mil. Includes Certificate of Conformance. | 1 | |
| ASL-08065W0900-01 | FIXING TOOL MLG BARREL | 1 | |
| AT03-40387 | GUN BARREL 6" (0.387) | 1 | |
| AT2050-17 | O-RING BARREL | 1 | |
| AT31819 | ASSY TOOL BARREL NUT | 4 | |
| AT31819-IAS | ASSEMBLY TOOL BARREL NUT | 1 | |
| ATI520CJP-1 | BARREL END CAP FOR POWER UNIT | 1 | |
| B71039 | REMOVAL EQUIPMENT -0 BARREL NUT, ENGINE MOUNT | 1 | |
| B71039-1 | BARREL NUT,REMOVER | 1 | |
| B71039-9 | REMOVAL EQUIPMENT - BARREL NUT, ENGINE MOUNT | 4 | |
| BCT-1 | OPEN BARREL CRIMP | 1 | |
| BH120-1032M2 | BARREL NUT TOOL | 5 | |
| BH1200-1032/M2 | BARREL NUT TOOL | 1 | |
| BH1200-1032M2 | BARREL NUT TOOL | 1 | |
| BN#10-24X1/2-SS | BARREL NUT #10-24 X 1/2 STAINLESS STEEL | 1 | |
| BNC-N16/50-500K | ADAPTOR - 16PIN LEMO (MALE) TO BNC(FEMALE) 50-500KHZ ADAPTOR, SW BARREL MIL. INCLUDES CERTIFICATE OF CONFORMANCE. | 1 | |
| BOD70 | ROTARY BARREL PUMP | 1 | |
| C44666-200 | MLG IMPROVED BARREL PIN | 1 | |
| C47943 | C47943 ADAPTER - FORWARD LANDING GEAR BARREL SCISSORS MIDDLE PIN NUT | 5 | |
| C66441-20 | ARM BARREL PIN A300 | 1 | |
| C66441-200 | PIN BARREL | 1 | |
| C66441-200 BARREL PIN | PIN BARREL 300-600 | 1 | |
| CA18157T10 | BARREL REMOVAL TOOL | 4 | |
| CERR60-6 | BARREL NUT ASSEMBLY | 1 | |
| D10106-2-O2 | HIGH PRESSURE CYLINDER (FOR SC HYDRAULIC GAS BOOSTER)/ BARREL-GAS. | 1 | |
| D63756-10 | BARREL BUSH | 1 | |
| E54585 | BARREL PULLING FIXTURE | 1 | |
| ECFB200-1S | 3 WATT BARREL SILVER | 1 | |
| F21808 | BARREL,DUMMY- | 1 | |
| F46253-1000 | ADAPTER FOR SHOCK ABSORBER ATTACHING NUT ON BARREL (MLG) | 1 | |
| F73012-1 | SWAGING EQUIPMENT - ROLLER, LOCK ACTUATOR BARREL, MAIN LANDING GEAR | 1 | |
| FASSWAGENDRAIN200L | BARREL TROLLEY DRAIN WATER 200 LITER | 1 | |
| FBPP-BAP1 | FBPP-BAP1;BARREL ASSEMBLY FOR PROBE STANDARD CONFIGURATION--REV001 | 1 | |
| FBPP-BAP1-G | FBPP-BAP1-G;Barrel Assembly for FBPT -1 Guides | 1 | |
| FBPP-BAP2 | FBPP-BAP2;Extended Barrel Assembly for Probe-Rev001 | 1 | |
| FBPP-BAP3 | FBPP-BAP3;Barrel Assembly Narrow Type | 2 | |
| FBPP-BAP3-A6 | FBPP-BAP3-A6;Barrel Assembly - Narrow with 60 Degree Angle | 1 | |
| FBPP-BAP4 | FBPP-BAP4;Barrel Narrow 2.5mm | 1 | |
| FBPP-BAP4-A6 | BARREL ASSEMBLY | 1 | |
| FBPP-EOB3 | FBPP-EOB3;Extended Optical Barrel for Use with BAP3 Guides | 1 | |
| FBPT-P3-1100 | FBPT-P3-1100;TIP LONG BARREL EXTENSION W/RIBBONDRIVE 11.0 INCH | 1 | |
| FBPT-P3-1100-LB | FBPT-P3-1100-LB;TIP LONG BARREL EXTENSION 11.00 INCH | 1 | |
| FBPT-P3-750 | FBPT-P3-750;P5000I Long Barrel Assembly 7.25 Inch with RibbonDrive | 1 | |
| FBPT-P3-750-JSF | FBPT-P3-750-JSF;Extended Barrel with JSF Tips for 2-Pos and 6-Pos MT | 1 | |
| FBPT-P3-750-LB | FBPT-P3-750-LB;Tip 7.5 Inch Extended Barrel | 1 | |
| FBPT-U12M-N | FBPT-U12M-N;Tip 1.25mm Mil Pin Termini Requires FBPP-BAP3 Barrel--REV01 | 1 | |
| FBPT-U25M-N | FBPT-U25M-N;Tip 2.5mm Mil Pin Termini Requires FBPP-BAP3 Barrel--REV0 | 1 | |
| FDOO01-35-42000-000 | To align barrel assy and end fitting (9-250) during assembly | 1 | |
| FSPK1 | BARREL FOR FSPK | 1 | |
| FW200HYJET | BARREL 200LITER HY JET IV | 1 | |
| G1262 | Gage for TE 576783 Wire Barrel | 2 | |
| GA64574-10 | BARREL ASSY | 1 | |
| GA67179 | BARREL # BARREL ASSY | 1 | |
| GB 0.1875-2-12-2LD | GUN BARREL THREADED.187 | 1 | |
| GB 0.2000-2-12-2LD | GUN BARREL THREADED.200 | 1 | |
| GB 0.2470-2-12-2LD | GUN BARREL THREADED.247 | 1 | |
| GB 0.2630-2-12-2LD | GUN BARREL THREADED.263 | 1 | |
| GB 0.3090-2-12-2LD | GUN BARREL THREADED.309 | 1 | |
| GB 0.3710-2-12-2LD | GUN BARREL THREADED.371 | 1 | |
| GB 0.4960-2-12-2LD | GUN BARREL THREADED.496 | 1 | |
| GB 0.5000-2-12-2LD | GUN BARREL THREADED.500 | 1 | |
| GB0. 1562-6.0000-2.0000B | GUB BARREL DRILL BIT | 1 | |
| GB0. 1850-6.0000-2.0000B | GUB BARREL DRILL BIT | 1 | |
| GB0.1250-2.7500-1.6250B | GUNBARREL DRILL BIT, 0.1250 STRAIGHT TYPE | 1 | |
| GB0.1562-3.1250-0.2000B | GUNBARREL DRILL BIT, 0.1562 STRAIGHT TYPE | 1 | |
| GB0.1850-3.5000-2.3125B | GUNBARREL DRILL BIT, 0.1850 STRAIGHT TYPE | 1 | |
| GB0.2010-3.6250-2.4375B | GUNBARREL DRILL BIT, 0.2010 STRAIGHT TYPE | 1 | |
| GB0.2460-4.0000-2.7500B | GUNBARREL DRILL BIT, 0.2460 STRAIGHT TYPE | 1 | |
| GB0.2500-4.0000-2.7500B | GUNBARREL DRILL BIT, 0.2500 STRAIGHT TYPE | 1 | |
| GB0.2610-4.1250-2.8750B | GUNBARREL DRILL BIT, 0.2610 STRAIGHT TYPE | 1 | |
| GB0.3125-4.5000-3.1875B | GUNBARREL DRILL BIT, 0.3125 STRAIGHT TYPE | 1 | |
| GB0.3281-4.6250-3.3125B | GUNBARREL DRILL BIT, 0.3281 STRAIGHT TYPE | 1 | |
| GB0.3438-4.7500-3.4375B | GUNBARREL DRILL BIT, 0.3438 STRAIGHT TYPE | 1 | |
| GB0.3680-5.000-3.6250B | GUNBARREL DRILL BIT, 0.3680 STRAIGHT TYPE | 1 | |
| GB0.4062-5.2500-3.8750B | GUNBARREL DRILL BIT, 0.4062 STRAIGHT TYPE | 1 | |
| GB0.4375-5.5000-4.0625B | GUNBARREL DRILL BIT, 0.4375 STRAIGHT TYPE | 1 | |
| GB0.5000-6.0000-4.5000B | GUNBARREL DRILL BIT, 0.5000 STRAIGHT TYPE | 1 | |
| GBDR#3/16X3 | GUN BARREL 3/16 | 1 | |
| GBDR#40X3 | GUN BARREL 40 | 1 | |
| GBDR#5/16X3 | GUN BARREL 5/16 | 1 | |
| GBDR5/32X3 | GUN BARREL 5/32 | 1 | |
| GRO18.431 | BARREL ROTORY FILE 1IN - 6 PK | 1 | |
| GS10674 | ADAPTER BARREL | 1 | |
| GS12984 | ASSY BARREL HALF PULLE | 1 | |
| GS15049-1 | FIXTURE, BARREL LIFTING | 1 | |
| GS15571-1 | BARREL OIL CONTAINER | 10 | |
| GS16316-1 | RIGHT BAND BARREL REWORK TEMPLATE KIT | 1 | |
| GS16317-1 | LEFT BAND BARREL REWORK TEMPLATE KIT | 1 | |
| GS18010 | OIL SHIELD BARREL ASSY | 1 | |
| GS2084-1 | BARREL PRESSURIZER | 1 | |
| GS20842-1 | BARREL PRESSURE | 14 | |
| GS20842-1-ST | ADAPTER FOR BARREL PRESSURIZER | 1 | |
| GS23013-1 | BARREL PRESSURIZER | 7 | |
| GS23420-1 | PRESURIZED BARREL | 17 | |
| GS23435 | BARREL PRESSURIZER | 1 | |
| GS23435-1 | PRESSURIZER, BARREL | 16 | |
| GS23463-1 | PRESSURIZER, BARREL | 1 | |
| GS48251 | TOOL KIT (TO REMOVE HINGE ARM/BARREL PIN MLG) | 1 | |
| GUN BARREL 1/4 | GUN BARREL 1/4 | 1 | |
| GUN BARREL 3/16 | GUN BARREL 3/16 | 1 | |
| GUN BARREL 5/32 | GUN BARREL 5/32 | 1 | |
| GUN BARREL D | GUN BARREL D | 1 | |
| H21820 | DUMMY BARREL | 1 | |
| H46750 | EXTRACTOR, LINK-BARREL | 3 | |
| H46750-001 | EXTRACTOR-LINK BARREL | 3 | |
| H46831 | NLG Barrel Nut R/I Adptr | 11 | |
| H46931 | NLG BARREL NUT R/I ADPTR | 1 | |
| HCS2036-01-025 | GRINDER- BARREL | 1 | |
| HCS2036-01-027 | SANDING BARRELS | 1 | |
| HCS2036-01-075 | SANDING BARRELS | 1 | |
| HCS2036-01-076 | SANDING BARRELS | 1 | |
| HCS2036-01-077 | SANDING BARRELS | 1 | |
| HCS2036-01-078 | SANDING BARRELS | 1 | |
| HCS2036-01-079 | SANDING BARRELS | 1 | |
| HCS2036-01-080 | SANDING BARRELS | 1 | |
| HCS2036-01-081 | SANDING BARRELS | 1 | |
| HCS2036-01-082 | SANDING BARRELS | 1 | |
| HCS2036-01-083 | SANDING BARRELS | 1 | |
| HS7031 | PULLER - BARREL HALF | 2 | |
| HSP1083 | EXTENSOMETER - BARREL BOLT | 1 | |
| HSP1704 | FIXT BARREL PLAT OVERH | 1 | |
| HSP272 | BARREL HALF PULLER | 1 | |
| HSP706 | NO GO GAUGE WALL THICKNESS BARREL | 1 | |
| HSP706 NO.60 | NO GO GAUGE WALL THICKNESS BARREL | 1 | |
| J1703004 | ROTARY BARREL PUMP | 1 | |
| J32008-19 | BARREL NUT, LH | 1 | |
| J32008-20 | BARREL NUT, RH | 1 | |
| J47235 | PULLER FOR CONNECTING PIN OF NOSE LANDING GEAR ACTUATING CYLINDER ON BARREL | 1 | |
| J52023-14 | BARREL NUT | 1 | |
| J71017-17 | LONG BARREL NUT | 1 | |
| J71017-18 | LONG BARREL NUT | 1 | |
| J71017-7 | SHORT BARREL NUT | 1 | |
| J71017-8 | SHORT BARREL NUT | 1 | |
| J71067-1 | SLING EQUIPMENT - INLET COWL INNER BARREL | 1 | |
| K32018-46 | Barrel Nut | 1 | |
| K32018-61 | Barrel Nut | 1 | |
| K71006-7 | BARREL NUT | 1 | |
| LB20 | Front Barrel | 5 | |
| M-520 | DOME-BARREL PRE LOAD GAGE | 1 | |
| M21811 | DUMMY BARREL | 1 | |
| M2181100 | DUMMY BARREL | 1 | |
| M21811000 | DUMMY BARREL | 1 | |
| M21811010 | Dummy Barrel | 2 | |
| M22520-1-01 | BARREL CRIMP TOOL | 26 | |
| M22520-2-01 | BARREL CRIMP TOOL | 18 | |
| M22520/1-01 | BARREL CRIMP TOOL (AF8) | 26 | |
| M22520/1-02 | CRIMP BARREL (TURRET) | 18 | |
| M22520/2-01 | BARREL CRIMP TOOL | 18 | |
| M314-610 | GUN BARREL COVER, padded (set of 2) | 1 | |
| M46200 | FALSE JAWS NLG BARREL ASSY. | 18 | |
| MS21251-B5S | TURNBUCKLE BARREL (WITH CLIP LOCKING) | 1 | |
| MS3191-1 | BARREL CRIMP TOOL | 6 | |
| MV-11 | BARREL INTAKE PORT | 1 | |
| NTGPC-002 | BARREL, REVERSIBLE HANDSTOCK | 1 | |
| NTGPC002 | HANDSTOCK END BARREL | 1 | |
| OREAA57 | WRENCH,PLIER;|WRENCH FOR BARREL TUBE; | 1 | |
| PF51-003-1 | Hoist - Fishpole, 500lb Capacity, 35 Foot Cable, 5 to 9 Foot Adjustable telescoping Barrel | 11 | |
| PF51-009-1 | HOIST - FISHPOLE, PNEUMATIC POWERED, 500 LB. CAPACITY WITH 40' OF CABLE, TELESCOPING BARREL (5'-9') AND ADJUSTABLE LOAD LIMITER | 12 | |
| PF51-103-5 | FISHPOLE HOIST, MANUAL, 200 LB CAP., W/3-BARREL KIT | 2 | |
| PWC48-3 | C JAW OPEN BARREL 10-20 | 1 | |
| PWC48-4 | H JAW OPEN BARREL D-SUB | 1 | |
| Q21948 | DUMMY BARREL | 2 | |
| QA46552-100 | REMOVAL TOOL BARREL A310 | 1 | |
| R60-6 | BARREL NUT | 1 | |
| RB0006-809-00650 | Barrel Wrench, Sherlock Nut | 1 | |
| RB0006-809-00759-6F | Barrel Wrench For Nut Sl61N-6F | 2 | |
| RB0006-809-00759-7F | Barrel Wrench For Nut Sl61N-7F | 1 | |
| RBA9960 | Barrel Wrench | 1 | |
| RBA9961 | Barrel Wrench, Main Rotor Transmission "C" Model | 1 | |
| RBA9963 | Barrel Wrench | 2 | |
| RBA9966 | Barrel Wrench Set T-Handle (2 Piece) | 2 | |
| RBT5100-ATP-1 | Barrel Wrench Set | 2 | |
| RRT084607 | BOLT AND BARREL NUT | 1 | |
| RRT084608 | BOLT & BARREL-NUT KIT | 1 | |
| RRT088893-1 | BOTL & BARREL NUT KIT FOR FRONT MOUNT IN LIFT BEAM P/N-RRT050676-1 | 1 | |
| RSE 6402 | INLET INNER BARREL PROTECTION | 1 | |
| SA8546 | THREADED GUN BARREL 0.2050 | 1 | |
| SAG18600 | OPEN BARREL CRIMPING TOOL | 1 | |
| SB0208 | GUN BARREL DRILL #20 | 1 | |
| SB0769 | GUN BARREL DRILL 3/16" | 1 | |
| SB5565-LONG | THREADED GUN BARREL LONG; 3/16" | 1 | |
| SB5565-STUB | THREADED GUN BARREL 3/16" | 1 | |
| SB5566-LONG | THREADED GUN BARREL E-1/4-2500(LONG) | 1 | |
| SB5566-STUB | THREADED GUN BARREL E-1/4-2500(STUB) | 1 | |
| SB5591 | THREADED GUN BARREL G-2610 | 1 | |
| SCR.225-S/6 ELB | EC Probe .225 diameter, split core recessed, 6 Mhz, Extra Long Barrel (1.75) | 1 | |
| SCR.239-S/6 ELB | EC Probe .239 diameter, split core recessed, 6 Mhz, Extra Long Barrel (1.75) | 1 | |
| SCR.307-S/6 ELB | EC Probe .307 diameter, split core recessed, 6 Mhz, Extra Long Barrel (1.75) | 1 | |
| SP505520 | BARREL SLEEVE | 1 | |
| SPL-14660 | POSITIONER - FAN DISK BARREL NUT | 1 | |
| SPL-27 | Adapter - Torque, Hydralic Reservoir Barrel Guide | 1 | |
| SR7923 | THREADED GUN BARREL 0.2160 | 1 | |
| ST1241FA | DRILL GUN BARREL | 1 | |
| ST1241FA-C-0-2350X6CO | .2350 COBALT GUN BARREL DRILL 6"OAL 165° SPPT | 1 | |
| ST1241FA-C-0-2975X6CO | .2975 COBALT GUN BARREL DRILL 6"OAL 165° SPPT | 1 | |
| ST1241FA-C-0-3600X6CO | .3600 COBALT GUN BARREL DRILL 6"OAL 165° SPPT | 1 | |
| ST1241FA-C-0-4225X6CO | .4225 COBALT GUN BARREL DRILL 6"OAL 165° SPPT | 1 | |
| ST1241FA-C-0-4850X6CO | .4850 COBALT GUN BARREL DRILL 6"OAL 165° SPPT | 1 | |
| SU4497 | THREADED GUN BARREL SHORT- .2190 | 1 | |
| SU4503 | THREADED GUN BARREL SHORT-.2495 | 1 | |
| T-71023 | Torque Adapter - Barrel gland nut | 1 | |
| T-71024 | Locating Punch - Actuator barrel trunnion | 1 | |
| T-71038 | Torque Adapter - Barrel gland nut | 1 | |
| T-DPFP006 | HOSE AND BARREL STEM ASSEMBLY | 1 | |
| T420 | BARREL:, | 2 | |
| T74335 | BARREL FREEZE SLEEVE | 1 | |
| TAM8098B | KIT OF ASSEMBLY AND DISASSEMBLY OF CONNECTING ROD BARRELS FOR 520 ENGINES | 1 | |
| TGL 0.2026 | THREADED GUN BARREL 0.2026 | 1 | |
| TGL 0.2470 | THREADED GUN BARREL LONG 0.2470 | 1 | |
| TGL 13-0.1850 | THREADED GUN BARREL LONG 13-0.1850 | 1 | |
| TGL 8-0.1990 | THREADED GUN BARREL LONG 8-0.1990 | 1 | |
| TGS 7-0.2010 | THREADED GUN BARREL STUB 7-0.2010 | 1 | |
| TGS B-0.2380 | THREADED GUN BARREL STUB B-0.2380 | 1 | |
| TN627157 | PROBE BARREL TOOL | 1 | |
| U755357 | NUT BARREL | 1 | |
| XBA23GL121 | BARREL PK G.L. | 1 | |
| YA4190-6A | BARREL ASSEMBLY | 1 | |
| YAD925 | 16 GALLON METAL BARREL | 1 | |
| ZA2HBL | Front Action Lever Barrel Pump | 1 | |
| H46831 | NLG BARREL NUT R/I ADAPTER | 11 | |
| 956A6071G01 | POSITIONER-FAN DISK BARREL NUT | 7 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
