| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| B27067-2 | BLOCKS | 1 | |
| F47881 | BLOCKS | 1 | |
| HU29211 | BLOCKS | 1 | |
| RRT054321 | BLOCKS | 1 | |
| RRT123696 | BLOCKS | 1 | |
| T-32951 | BLOCKS | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 02-7813C0100-A5 | Axle Jack - 12 Ton (Ce) - Without Spacer Blocks | 3 | |
| 08-1000-1 | SWIVEL DIMPLING COMBO WITH PUNCH & DIE BLOCK .401 SHANK, STYLE A ( DESCRIPTION: DIE BLOCKS .187" SHANK* )( RIVET DIAMETER: - ) | 1 | |
| 10-16097 | Bowers Pair Ball V Blocks, 2x2x1", 15 Capacity | 1 | |
| 10-16098 | Bowers Pair Ball V Blocks 3-3/8x3-3/8x1-3/8" | 1 | |
| 10-16099 | Bowers Pair Ball V Blocks 4¾x4¾x2-3/8" | 1 | |
| 10-16123 | Bowers Pair Clamps for Ball V Blocks 16097 | 1 | |
| 10-16124 | Bowers Pair Clamps for Ball V Blocks 16098 | 1 | |
| 10-16125 | Bowers Pair Clamps for Ball V Blocks 16099 | 1 | |
| 14531 | Red Box 4X Rivet Gun Set with Blocks | 1 | |
| 14539 | RED BOX 4X RIVET GUN SET WITH BLOCKS | 1 | |
| 181-903-10 | INSPECTION V-BLOCKS | 1 | |
| 1C6065 | PROTECTOR BLOCKS | 1 | |
| 1C8028 | PROTECTOR BLOCKS | 1 | |
| 2.887.01-9313-S | CALIBRATION BLOCKS FOR ROTOTEST | 6 | |
| 2.887.01-9314-S | CALIBRATION BLOCKS FOR ROTOTEST | 5 | |
| 2.887.01-9315-S | CALIBRATION BLOCKS FOR ROTOTEST | 4 | |
| 2.887.01-9316-S | CALIBRATION BLOCKS FOR ROTOTEST | 3 | |
| 211 | Moore & Wright Vee Blocks Pair, 63mm/2.48" Capacity | 1 | |
| 212 | Moore & Wright Vee Blocks Pairs, 80mm/3.15" Capacity | 1 | |
| 213 | Moore & Wright Vee Blocks Pairs, 100mm/3.94" Capacity | 1 | |
| 214 | Moore & Wright Vee Blocks Pairs, 125mm/4.92" Capacity | 1 | |
| 215 | Moore & Wright Vee Blocks Pairs, 160mm/6.3" Capacity | 7 | |
| 216 | Moore & Wright Vee Blocks Pairs, 200mm/7.87" Capacity | 1 | |
| 2213M | THICKNESS CALIBRATION BLOCKS | 1 | |
| 2214C | HARDWOOD CASE COMPATIBLE WITH 2211E, 2213E, 2214E, 2211M, 2213M, AND 2214M TEST BLOCKS. | 1 | |
| 2214M | THICKNESS CALIBRATION BLOCKS | 1 | |
| 230 | Moore & Wright Vee Blocks&Clamps Pairs 0.05mm Accuracy | 6 | |
| 231 | Moore & Wright Vee Blocks & Clamps Pair 0.01mm Accuracy | 3 | |
| 29A028 | 3 GROOVED TEST BLOCKS - STEEL | 4 | |
| 29A044 | Probe tool roll & test blocks | 1 | |
| 30-902-6231 | Sylvac 30-902-6231 Raising Blocks for External Jaws | 1 | |
| 350A93-3800-20 | REMOVAL / INSTALLATION - LAMINATE SUSPENSION BLOCKS - BIDIRECTIONAL SUSPENSION | 2 | |
| 350A93-3802-21 | REMOVAL / INSTALLATION - LAMINATE SUSPENSION BLOCKS - BIDIRECTIONAL SUSPENSION | 2 | |
| 350A93-3804-00 | REMOVAL / INSTALLATION - LAMINATE SUSPENSION BLOCKS - BIDIRECTIONAL SUSPENSION | 2 | |
| 350A93-3806-00 | REMOVAL / INSTALLATION - LAMINATE SUSPENSION BLOCKS - BIDIRECTIONAL SUSPENSION | 2 | |
| 351-3000-11GSE | THRUST REVERSER C-DUCT STEP BLOCKS | 1 | |
| 351-3000-28GSE | L6/L8 LATCH HANDLE JAM BLOCKS | 1 | |
| 365A93-3840-00 | MGB BOTTOM BLOCKS | 1 | |
| 365A93384000 | BLOCKS,MGB BASE | 1 | |
| 365A93384010 | BLOCKS MGB BASE | 1 | |
| 38-T5-1 | RISER BLOCKS | 2 | |
| 38-T5-2 | RISER BLOCKS | 3 | |
| 38-T5-2C | RISER BLOCKS | 2 | |
| 38-T5-3 | RISER BLOCKS #3 | 1 | |
| 38-T5-3A | RISER BLOCKS #3A | 1 | |
| 4340-5-0050 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 4340-5-0100 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 4340-5-0175 | STANDARD REFERENCE BLOCKS FOR ULTRASONICS – DISTANCE AMPLITUDE, 5/64" FLAT-BOTTOM HOLES, 4340 STEEL, IN ACCORDANCE WITH ASTM E127 | 1 | |
| 460001775 | HOLDING BLOCKS | 1 | |
| 460001775-1 | HOLDING BLOCKS | 1 | |
| 460001775-2 | HOLDING BLOCKS | 1 | |
| 460001775-3 | HOLDING BLOCKS | 1 | |
| 460001775-4 | HOLDING BLOCKS | 1 | |
| 460001775-5 | HOLDING BLOCKS | 6 | |
| 460001775-6 | HOLDING BLOCKS | 1 | |
| 460001775-7 | HOLDING BLOCKS | 1 | |
| 460001775-8 | HOLDING BLOCKS | 1 | |
| 460002090 | HOLDING BLOCKS | 1 | |
| 460002090-20 | HOLDING BLOCKS - MLG LOCKSTAY ACTR A320NEO | 4 | |
| 460005881 | Holding Blocks | 1 | |
| 460005881PM | HOLDING BLOCKS | 1 | |
| 460005882 | Holding Blocks | 1 | |
| 460005882PM | HOLDING BLOCKS | 1 | |
| 460006406 | HOLDING BLOCKS | 7 | |
| 460006570 | HOLDING BLOCKS | 1 | |
| 460006572 | HOLDING BLOCKS | 1 | |
| 460006579 | HOLDING BLOCKS | 1 | |
| 460007128 | HOLDING BLOCKS | 1 | |
| 4920-99-617-1999 | SLIPPER BLOCKS | 1 | |
| 516-135-60 | MITUTOYO GAUGE BLOCKS | 1 | |
| 516-139-16 | MITUTOYO GAUGE BLOCKS | 1 | |
| 516-650E | Mitutoyo 516-650E / Maintenance Kit for Gauge Blocks | 1 | |
| 516-704-10 | PLANE GAGE BLOCKS -GRADE 2; -8 BLOCKS PER SET | 1 | |
| 516-802-10 | Mitutoyo 516-802-10 / 2mm Carbide Wear Blocks, Metric, Grade 1 (2pcs) | 1 | |
| 516-803-10 | Mitutoyo 516-803-10 / 2mm Carbide Wear Blocks, Metric, Grade 0 (2pcs) | 1 | |
| 516-804-12 | Mitutoyo 516-804-12 / .1" Carbide Wear Blocks, Inch, Grade 1 (2pcs) | 1 | |
| 516-805-12 | Mitutoyo 516-805-12 / .1" Carbide Wear Blocks, Inch, Grade 0 (2pcs) | 1 | |
| 516-806-10 | Mitutoyo 516-806-10 / 1mm Carbide Wear Blocks, Metric, Grade 1 (2pcs) | 1 | |
| 516-807-10 | Mitutoyo 516-807-10 / 1mm Carbide Wear Blocks, Metric, Grade 0 (2pcs) | 1 | |
| 516-808-12 | Mitutoyo 516-808-12 / .05" Carbide Wear Blocks, Inch, Grade 1 (2pcs) | 1 | |
| 516-809-12 | Mitutoyo 516-809-12 / .05" Carbide Wear Blocks, Inch, Grade 0 (2pcs) | 1 | |
| 516-830-10 | Mitutoyo 516-830-10 / 2mm Ceramic Wear Blocks, Metric, Grade 0 (2pcs) | 1 | |
| 516-831-10 | Mitutoyo 516-831-10 / 2mm Ceramic Wear Blocks, Metric, Grade 1 (2pcs) | 1 | |
| 516-832-10 | Mitutoyo 516-832-10 / 1mm Ceramic Wear Blocks, Metric, Grade 0 (2pcs) | 1 | |
| 516-833-10 | Mitutoyo 516-833-10 / 1mm Ceramic Wear Blocks, Metric, Grade 1 (2pcs) | 1 | |
| 516-834-12 | Mitutoyo 516-834-12 / .1" Ceramic Wear Blocks, Inch, Grade 0 (2pcs) | 1 | |
| 516-835-12 | Mitutoyo 516-835-12 / .10" Ceramic Wear Blocks, Inch, Grade 1 (2pcs) | 1 | |
| 516-836-12 | Mitutoyo 516-836-12 / .05" Ceramic Wear Blocks, Inch, Grade 0 (2pcs) | 1 | |
| 516-837-12 | Mitutoyo 516-837-12 / .05" Ceramic Wear Blocks, Inch, Grade 1 (2pcs) | 1 | |
| 516-944-11 | GAGE BLOCK SET;|GAUGE BLOCKS STEEL,MEASURING,GRADE 2; | 1 | |
| 5220-99-617-2211 | HEIGHT BLOCKS | 1 | |
| 530G12406-1-3 | CALIBRATION STANDARDS-STEEL BLOCKS,SET OF 3 | 1 | |
| 6002013-100 | SET OF GAUGE BLOCKS | 1 | |
| 654478-1 | TCM REFERENCE BLOCKS | 1 | |
| 654483-1 | TCM REFERENCE BLOCKS | 1 | |
| 654485-1 | TCM REFERENCE BLOCKS | 1 | |
| 6895541 | Locating Blocks | 1 | |
| 69741-1 | ASPIRATOR SPACER BLOCKS | 1 | |
| 69741-3 | ASPIRATOR SPACER BLOCKS | 1 | |
| 70198-101 | ASPIRATOR SPACER BLOCKS | 1 | |
| 70198-103 | ASPIRATOR SPACER BLOCKS | 1 | |
| 70700-20463-041 | TAIL ROTOR SERVO LOCKOUT BLOCKS | 2 | |
| 7901267 | GAGE BLOCKS, RANGE: 0.050 TO 20 IN. ACCURACY: SEE TEST REPORT | 1 | |
| 8C2435 | FIXTURE, BUMPER BLOCKS, LPT MODULE | 1 | |
| 90-MT3012-50 | Bowers Mictrac Base Unit 0-12" c/w TF-PL Blocks | 1 | |
| 90-MT3024-50 | Bowers Mictrac Base Unit 0-24" c/w TF-PL Blocks | 1 | |
| 90-MT3036-50 | Bowers Mictrac Base Unit 0-36" c/w TF-PL Blocks | 1 | |
| 90-MT3048-50 | Bowers Mictrac Base Unit 0-48" c/w TF-PL Blocks | 1 | |
| 90-TF-.75T | Bowers Taper Blocks ¾", 8 & 10 Round | 1 | |
| 90-TF-1.0T | Bowers Taper Blocks, 1" TPF Buttress | 1 | |
| 90-TF-1.12T | Bowers 1 1/8" Taper Blocks, 1.125 TPF Connectors | 1 | |
| 90-TF-1.25RSC | Bowers 1¼" Taper Blocks, 1.25 TPF Rotary Shouldered Connectors | 1 | |
| 90-TF-1.5RSC | Bowers 1½" Taper Blocks, 1.5 TPF Rotary Shouldered Connectors | 1 | |
| 90-TF-1.75T | Bowers 1¾" Taper Blocks, 1.75 TPF Connectors | 1 | |
| 90-TF-STR | Bowers Straight Blocks | 1 | |
| 90-TF10 | Bowers Tapered Setting Blocks 10° Half Angle | 1 | |
| 90-TF15 | Bowers Tapered Setting Blocks 15° Half Angle | 1 | |
| 90-TF20 | Bowers Tapered Setting Blocks 20° Half Angle | 1 | |
| 90-TF30 | Bowers Tapered Setting Blocks 30° Half Angle | 1 | |
| 90-TF45 | Bowers Tapered Setting Blocks 45° Half Angle | 1 | |
| 97D29000025000 | DRAIN BRAKE BLOCKS TOOLING | 1 | |
| 981-102 | ANGLE CALIBRATION BLOCKS SET | 1 | |
| 98S51605001000 | CALIB REFERENCE BLOCKS | 2 | |
| 98S57205030000 | CARBON CALIBRATION BLOCKS SET | 3 | |
| 99A57104354000 | Search unit guide blocks | 2 | |
| 99A57104355000 | Search unit guide blocks | 3 | |
| 99D51407291001 | AIRBUS CARBON LAMINATE THICKNESS REFERENCE STANDARD SET A318-A321 51-10-06-PB4 Multidirectional Fabric Material, BLOCKS 01-06 includes waterproof case. Nominal Thicknesses of 1mm, 3mm, 5mm, 9mm, 15mm, 19mm. Includes Test Report and Certificate of Con... | 7 | |
| 99D55109001000 | REFERENCE BLOCKS | 7 | |
| 99F57103016001 | REFERENCE BLOCKS | 1 | |
| 99F57204106000 | REFERENCE BLOCKS | 4 | |
| 99F57204135000 | REFERENCE BLOCKS | 4 | |
| 99F57204136000 | REFERENCE BLOCKS | 4 | |
| 99F57204137000 | REFERENCE BLOCKS | 4 | |
| 99F57204138001 | REFERENCE BLOCKS | 4 | |
| 99F57204173000 | REFERENCE BLOCKS AIRBUS STANDARD, A330 57-20-46 | 3 | |
| 99F57204174000 | REFERENCE BLOCKS AIRBUS STANDARD, A330 57-20-46 | 2 | |
| 99F57204175000 | REFERENCE BLOCKS AIRBUS STANDARD, A330 57-20-46 | 2 | |
| 99F57204176000 | REFERENCE BLOCKS AIRBUS STANDARD, A330 57-20-46 | 2 | |
| 99F57204177000 | REFERENCE BLOCKS AIRBUS STANDARD, A330 57-20-46 | 2 | |
| 99V51307001000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307002000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307003000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307004000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| 99V51307008000 | CALIBRATION BLOCKS FOR POSITECTOR 6000 | 1 | |
| A0110284 | DRIVE BLOCKS ADAPTER EXTRACTOR | 1 | |
| AC21855000 | TEST BLOCKS | 1 | |
| AFNDT-1015-CS/MM | CUSTOM 4 STEP CALIBRATION BLOCKS CARBON STEEL , 54MM, 10MM, 15MM, 20MM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015-SS/MM | CUSTOM 4 STEP CALIBRATION BLOCKS STAINLESS STEEL , 54MM, 10MM, 15MM, 20MM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3157 | Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8" wide groove separates the blocks two sides to facilitate side-... | 1 | |
| AFNDT-DELRIN BLOCKS | DELRIN BLOCKS W/ TOE CLAMPS .500-.030 STEP BLOCKS | 1 | |
| CG150-6 | END BLOCKS | 1 | |
| CI682 | Starrett 268A V-BLOCKS (ONE PAIR) | 1 | |
| CI687 | Starrett 268C V BLOCKS (PAIR) + CLAMP | 1 | |
| CJ017 | Starrett 271A V BLOCKS (PAIR) | 1 | |
| CJ027 | Starrett 271C V BLOCKS (PAIR) + CLAMP | 1 | |
| CJMDX27-005A | Flap rig blocks | 3 | |
| DAH 601515 | Holding Blocks | 1 | |
| DAH 601760 | Holding Blocks | 1 | |
| DAH 601761 | Holding Blocks | 1 | |
| DAH601794 | BLOCKS,HOLDING | 1 | |
| DAH603963 | DAH603963 HOLDING BLOCKS | 1 | |
| DB952 | Starrett 568C MATCHED V BLOCKS & CLAMP | 1 | |
| DRT35000-100 | BLOCKS,HOLDING | 1 | |
| DST100-32 | HOLDING BLOCKS | 1 | |
| DST100−32 | Holding Blocks | 1 | |
| F2MA581800-11 | SAFETY BLOCKS | 1 | |
| F2MA581800-13 | SAFETY BLOCKS TO HOLD THRUST REVERSER IN DEPLOYED POSITION | 1 | |
| F2MA581800047 | SAFETY BLOCKS TO HOLD THRUST REV. DOORS IN DEPLOYED POSıTıON | 1 | |
| F64S27 | CABLE BLOCKS. | 1 | |
| G1002760001 | GSE, SPOILER BLOCKS | 3 | |
| G1002760001-023 | SPOILER WEDGE BLOCKS | 4 | |
| G1002760001-023 | BLOCKS, SPOILER, GSE | 4 | |
| G1002760001−023 | BLOCKS, SPIOLER, GSE | 4 | |
| G698−278102−101 | Slat Rigging Blocks #3 | 1 | |
| HLA6564 | Brake Bleeding Case (4 Blocks) | 1 | |
| HU1290 | HEIGHT BLOCKS | 1 | |
| HU21578 | SLIPPER BLOCKS | 1 | |
| HU29201 | SETTING BLOCKS | 1 | |
| HU44762 | SETTING BLOCKS | 1 | |
| IAE 1P18865-1 | RETENTION BLOCKS | 1 | |
| IAE1J12414 | WOODEN BLOCKS | 1 | |
| IAE3R19134 | ALLMEN BLOCKS | 1 | |
| J46006 | HOLDING BLOCKS | 1 | |
| J46011 | HOLDING BLOCKS | 1 | |
| J46159 | HOLDING BLOCKS | 1 | |
| KB2BB-100-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-101-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-102-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-103-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-120-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-121-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-122-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-123-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-40-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-41-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-42-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-43-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-60-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-61-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-62-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-63-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-80-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-81-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-82-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KB2BB-83-XXXX-0 | Backup Blocks - KB2 Blocks | 1 | |
| KBBB-10-0-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-10-1-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-10-2-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-10-3-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-4-0-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-4-1-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-4-2-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-4-3-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-4-4-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-6-0-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-6-1-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-6-2-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-6-3-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-8-0-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-8-1-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-8-2-N-1 | Backup Blocks - KB Blocks | 1 | |
| KBBB-8-3-N-1 | Backup Blocks - KB Blocks | 1 | |
| KRBB-R30-1 | Backup Blocks - KR Blocks | 1 | |
| KRBB-R32-1 | Backup Blocks - KR Blocks | 1 | |
| KRBB-R40-1 | Backup Blocks - KR Blocks | 1 | |
| KRBB-R42-1 | Backup Blocks - KR Blocks | 1 | |
| KRBB-R50-1 | Backup Blocks - KR Blocks | 1 | |
| KRBB-R52-1 | Backup Blocks - KR Blocks | 1 | |
| KRBB-R60-1 | Backup Blocks - KR Blocks | 1 | |
| KRBB-R62-1 | Backup Blocks - KR Blocks | 1 | |
| LST51312 | 278 V BLOCKS - PAIR | 1 | |
| LST52592 | V BLOCKS(2)ANDCLAMPS(MATCHPAIR | 1 | |
| MAB Block-S | CALIBRATION BLOCKS | 1 | |
| MACCW7 | COUNTER WEIGHT: BLOCKS,SET, | 2 | |
| MBEU186058 | PARACHUTE PACKING BOX AND BLOCKS KIT | 1 | |
| MBEU8463 | CLAMP BLOCKS-PAIRS, EJECTION GUN | 1 | |
| MCI06378061 | SET UP BLOCKS | 1 | |
| MT1026 | HOLDING BLOCKS | 1 | |
| MT1026-104 | HOLDING BLOCKS | 1 | |
| MT1026-130 | MT1026/130 HOLDING BLOCKS | 1 | |
| MT1026-130PM | MT1026/130 HOLDING BLOCKS | 1 | |
| MT1026-63 | HOLDING BLOCKS | 2 | |
| MT1026/107 | HOLDING BLOCKS | 1 | |
| MT1026/130 | Holding Blocks | 1 | |
| MT1026/63 | Holding Blocks | 2 | |
| MT1026/82 | BLOCKS HOLDING | 1 | |
| MT102682 | BLOCKS HOLDING | 1 | |
| MT146-2 | Blocks for C198-1 | 1 | |
| MT146-2/PHP | BLOCKS FOR C198-1 | 1 | |
| MT146-3 | BLOCKS-LOWER SWASH PLATE RIGGING | 1 | |
| MT146-4 | Blocks, R44/ R66 W/F198 | 1 | |
| MT376-1 | Blocks - MR Rigging | 1 | |
| MT559-1 | Blocks - MR Rigging R | 2 | |
| MT559-1/PHP | BLOCKS - MR RIGGING R | 1 | |
| NB602672LONGCT | GAGE BLOCKS, RANGE: 0 TO 48 INCH, 8 PIECE SET, ACC | 1 | |
| NRK-3AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. All Standards Manufactured in Accordance with U.S.A.F. ... | 1 | |
| PM81458 | BOX COMPLETE WITH WOODEN BLOCKS AS PER DRAWING | 1 | |
| PS0415SET | PS0415 Including Blocks(4) | 1 | |
| PWA88016 | SPACER BLOCKS-TRANSLATING COWL LOCKOUT | 2 | |
| PWA88120 | RISER BLOCKS | 1 | |
| PWA88540 | RISER BLOCKS | 1 | |
| Q47749 | GUIDE FOR THE INSTALLATION OF THE DRIVE BLOCKS (2-060) | 9 | |
| RBE332A94-2702-02 | Set Of Blocks A.P Including | 1 | |
| RBE332A94-2791-00 | Set Of Blocks Tail Rotor | 1 | |
| RBT18561-23 | Extract Tool-Terminal Blocks | 1 | |
| RBW0705G00411-3G | LANDING GEAR BLOCKS | 2 | |
| RIVETBLOCKS | RIVET BLOCKS. TOOL | 1 | |
| RT10-6AL4V-1/16MM | 10 step wedge 15mmx15mm steps blocks 1,2,3,4,5,8,10,12,14,16mm steps Titanium | 1 | |
| RT10.15-6AL4V-2/20MM | 10 step wedge 15mmx15mm steps blocks 2,4,6,8,10,12,14,16,18,20mm steps +/- .02mm, Length and width +/- .5mm, Titanium | 1 | |
| RT10.20-6AL4V-2/20MM | 10 step wedge 20mmx20mm steps blocks 2,4,6,8,10,12,14,16,18,20mm steps Titanium | 1 | |
| RT10.40-2024T3-2/20MM | 10 step wedge 40mm wide x15mm long, steps blocks 2,4,6,8,10,12,14,16,18,20mm steps +/- .0254mm, 2024-T3 | 1 | |
| RT10.40-6AL4V-2/20MM | 10 step wedge 40mm wide x15mm long, steps blocks 2,4,6,8,10,12,14,16,18,20mm steps +/- .0254mm, 6AL-4V | 1 | |
| RT5_75-1018-2_5/12_5MM | THICKNESS CALIBRATION BLOCKS | 1 | |
| RT5_75-7075T6-_25/1_25 | THICKNESS CALIBRATION BLOCKS | 1 | |
| Red Box 4X Rivet Gun Set with Blocks | Red Box 4X Rivet Gun Set with Blocks | 1 | |
| Riveting Blocks | Riveting Blocks | 1 | |
| SB7P376A0002-00 | BULLET - TO ASSEMBLE DISTRIBUTOR BLOCKS TO TRUNNIONS | 1 | |
| SK601-10021 | CALIBRATION REFERENCE BLOCK SET (TAIL SECTION / HORIZONTAL STABILIZER) - SK601-10021 SERIES (BLOCKS 1 - 5) | 1 | |
| ST-212 | GAGE BLOCKS, CRANKSHAFT COUNTERWEIGHT BUSHING ADQUIRIR | 1 | |
| ST1000-A-8252 | SET OF FIVE LONG REACH RIVETING BLOCKS | 1 | |
| STD-14220 | RIGGING BLOCKS | 1 | |
| STD-14221 | RIGGING BLOCKS | 1 | |
| STD-14222 | RIGGING BLOCKS | 1 | |
| TB1065-1 | CALIBRATION BLOCKS | 1 | |
| TB1065-4 | CALIBRATION BLOCKS | 1 | |
| TEST BLOCK | ROCKWELL TEST BLOCKS | 1 | |
| TO7284 | ASPIRATOR SPACER BLOCKS | 1 | |
| V-BLOCK | V BLOCKS TOOL | 1 | |
| WB808-1146 | Spanner Tq- Elect terml Blocks 9LB-INS | 5 | |
| WB808-1146B | Spanner Tq- Elect terml Blocks 9LB-INS | 4 | |
| WB808-1346 | Spanner Tq-Elect terml Blocks | 4 | |
| WB808-4UNC | Spanner Tq-Elect terml Blocks 3.5 LB-IN | 6 | |
| WCI-BB-06-1-N | BACKUP BLOCKS - KB BLOCKS | 1 | |
| WCI-BB-06-2-N | BACKUP BLOCKS - KB BLOCKS | 1 | |
| WCI-BB-08-0-N | BACKUP BLOCKS - KB BLOCKS | 1 | |
| WCI-BB-08-1-N | BACKUP BLOCKS - KB BLOCKS | 1 | |
| WCI-BB-08-2-N | BACKUP BLOCKS - KB BLOCKS | 1 | |
| WCI-BB-10-0-N | BACKUP BLOCKS - KB BLOCKS | 1 | |
| WCI-BB-10-1-N | BACKUP BLOCKS - KB BLOCKS | 1 | |
| WCI-BB-10-2-N | BACKUP BLOCKS - KB BLOCKS | 1 | |
| X-106-1-13-2 | BLOCKS, CLAMP FIXTURE | 1 | |
| X106-1-13-1 | Clamp Blocks | 1 | |
| X106-1-13-2 | Clamp Blocks | 1 | |
| X106-1-13-3 | Clamp Blocks | 1 | |
| YALE C85 | 6 TON LIFITING BLOCKS | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
