| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0501750-13.4 | BLOCK PRO | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0501750-13-4 | PROP BLOCK | 2 | |
| 12AAA787 | Mitutoyo 12AAA787 Block for Calibrating Probe Diameter | 1 | |
| 1C6065 | PROTECTOR BLOCKS | 1 | |
| 1C8028 | PROTECTOR BLOCKS | 1 | |
| 2-069-69-0002 | PROBE & CALIBRATION BLOCK SET | 1 | |
| 27-1-3897A | PLATE ADJUSTEMENT BRUSH BLOCK AND PICK-UP PROBE 27.1.3897.01 | 1 | |
| 27-1-4339A | PROP DEICE BRUSH BLOCK RETAINER | 3 | |
| 27.1-4339 | RETAINER-BRUSH BLOCK.PROPELLER ANTI-ICING F50 | 1 | |
| 27.1-4339A | RETAINER-BRUSH BLOCK.PROPELLER ANTI-ICING F50 | 3 | |
| 29A012 | Probe guide sprung with v-block attachme | 1 | |
| 29A044 | Probe tool roll & test blocks | 1 | |
| 324520 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| 33A150 | TEST BLOCK, ROTATING PROBE | 1 | |
| 3404025-1 | PROPELLER BRUSH BLOCK ADJUSTMENT KIT | 1 | |
| 513.32.12.057 | WEIGHT ON WHEELS PROX SWITCH ADJUSTMENT BLOCK | 1 | |
| 640-025-005 | GEIT ROTARY DEMO KIT WITH (2) PROBES AND TEST BLOCK | 1 | |
| 83800145 | GOLD BLOCK EPROM | 1 | |
| 83800146 | GOLD BLOCK EPROM | 1 | |
| 98S27005012001 | TOOL BLOCK PROF | 1 | |
| 98S27105007000 | TOOL BLOCK PROF ATR 72 | 1 | |
| 99A53003001100 | ROTATING PROBE CALIBRATION BLOCK (TITANIUM) | 4 | |
| 99A53003001102 | ROTATING PROBE CALIBRATION BLOCK (STEEL) | 5 | |
| 99D51407291001 | AIRBUS CARBON LAMINATE THICKNESS REFERENCE STANDARD SET A318-A321 51-10-06-PB4 Multidirectional Fabric Material, BLOCKS 01-06 includes waterproof case. Nominal Thicknesses of 1mm, 3mm, 5mm, 9mm, 15mm, 19mm. Includes Test Report and Certificate of Con... | 7 | |
| 99D55109001000 | AIRBUS A318/A319/A320/A321 CARBON STANDARD PT 4 51-10-06 PAGE 7. MULTIDIRECTIONAL TAPE MATERIAL BLOCK SET OF 4 includes waterproof case. NOMINAL THICKNESS (1mm, 3mm, 5mm, 7mm). Includes Test Report and Certificate of Conformance. | 7 | |
| 99F54503000000 | CALIBRATION BLOCK SHAFT-ADJUSTABLE MINI ROTATING PROBE | 2 | |
| 99V57200003000 | CALIBRATION BLOCK PROBE | 3 | |
| AF-5222 | FLEXIBLE ROTARY FLAT BOTTOM PROBE SPLIT END, EXPANDABLE FROM .187"-.205" WITH ADJUSTABLE COLLAR GUIDE BLOCK. 5.0" LONG STEEL 4 PIN FISCHER CONNECTOR 100KHz-2MHz. Includes Test Report and Certificate of Conformance | 1 | |
| AF-5222-1 | FLEXIBLE ROTARY FLAT BOTTOM PROBE SPLIT END, EXPANDABLE FROM .187"-.200" WITH ADJUSTABLE COLLAR GUIDE BLOCK. 5.0" LONG STEEL 4 PIN STEP LEMO CONNECTOR 100KHz-2MHz. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3187AL | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Per Airbus Procedure A 51-10-04. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3187TI | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Per Airbus Procedure A 51-10-04. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3348/2024T3 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 2024-T351 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3348/4340 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 4340 Steel (Nickle Plated for Corrosion Protection). Includes Test Report and Certificate of Conformance. Manu | 1 | |
| AFNDT-3348/7075T6 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 7075-T6 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Conforma | 1 | |
| AFNDT-3407AL | Aluminum Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9 | 1 | |
| AFNDT-3407SS | 17-4PH Stainless Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), | 1 | |
| AFNDT-3407ST | 4340 Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), | 1 | |
| AFNDT-3407TI | Titanium Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9 | 1 | |
| AFNDT-3508/6061 | METRIC 5 STEP CALIBRATION BLOCK, 6061-T4 ALUMINUM. STEP SIZES: .5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm. PAD SIZE: 1.0" x 1.0". PROVIDED WITH A DELRIN HOLDER.Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3561AL | CUSTOM 3 STEP CALIBRATION BLOCK, 2024-T3 ALUMINUM... STEP PAD SIZE: 25.0mm x 25.0mm. STEP THICKNESSES: 0.3mm, 0.5mm and 0.8mm ± 0.03mm. Supplied with Protective Acetal Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AGE12764 | BLOCK, PROTECT | 1 | |
| ATB005 | TEST BLOCK, ROTATING PROBE | 1 | |
| ETher Weld Kit | ETher Weld Kit – includes, Probe, Weld, Dia 16.00mm (Medium) 100kHz, Probe, Unshielded, Broad Band, Test Block, Weld Probe, Lead, Lemo 12-Way - Lemo 4-Way, Lead. Lemo 00 to BNC, 1.5m, Butterfly PTFE Tape, Deluxe Probe Case PHDC1, Hard Transit Case | 1 | |
| F80161-10 | PROTECT BLOCK | 4 | |
| GS22237-1 | PROTECTOR BRUSH BLOCK | 1 | |
| HU81924 | KIT FOR RB211-524 ENGINES CONTAINING PROBE 1027388 AND BLOCK QC6852. | 1 | |
| HU81925 | KIT FOR RB211-535 ENGINES CONTAINING PROBE 1027421 AND BLOCK QC6854 | 2 | |
| IAE 2R19442 | ULTRASONIC PROBE AND TEST BLOCK | 1 | |
| IAE2R18901 | TEST BLOCK-TRANSIENT ACOUSTIC PROPAGATION | 7 | |
| IAE2R18902 | TEST BLOCK-TRANSIENT ACOUSTIC PROPAGATION | 4 | |
| IAE2R19429 | Kit- Test block and Ultrasonic probe | 6 | |
| IAE2R19442 | ULTRASONIC PROBE AND TEST BLOCK | 1 | |
| IAE2R19921 | TEST BLOCK-TRANSIENT ACOUSTIC PROPAGATION | 3 | |
| K78006-1 | TOOL-PIN BLOCK VALV PROPUL AERO ENGINE | 11 | |
| MAGNA.IA MATL 2024-T3. | MAGNA-THIN STEP BLOCK PRODUCT ID: | 1 | |
| MHS-29-1A-0 | ROTATING PROBE TEST BLOCK, MULTIPLE HOLE STANDARD - 29 HOLES | 1 | |
| NDT1084 | Calibration block for rotary probes | 1 | |
| PKA-15H-156.02.1 | Hand-Held Block Probe | 1 | |
| RBW6205G03832-3G | Main Rotor Blade Blocking/Protecting Assembly | 2 | |
| RBW895-3101-04-117 | Main Rotor Blade Blocking And Protector Tool | 2 | |
| RSMVS12-15 | CALIBRATION BLOCK SHAFT-ADJUSTABLE MINI ROTATING PROBE | 1 | |
| SP-265 | LOCKHEED C-130 STEP BLOCK. PROCEEDURE SMP 515-C. PAGE 9 MATERIAL: 7075-T6 ALUMINUM. | 1 | |
| T-4209JB | BLOCKJAMMECHPULLER4211BAPROTO | 1 | |
| T-4211BA | JAWBLOCK ASSEMBLY PROTO | 1 | |
| T-4229JB | BLOCKJAWMECHLPULLER4231APROTO | 1 | |
| T-4231A | JAWBLOCK ASSEMBLY PROTO | 1 | |
| T-474459 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-474489-1-10 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| T-474530-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-474566-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-475069-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-475070-1-10 | TOOL, CHILL-BLOCK-AND- PROTECTOR | 1 | |
| T-475976-1-10 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| TL5684 | PIN PROP BRUSH BLOCK CHECKING | 2 | |
| WT-001978-7 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT-00198-1 | TOOL, CHILL-BLOCK- AND-PROTECTOR | 1 | |
| WT-00198-10 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| WT-00198-12 | TOOL, CHILL-BLOCK-AND-PROTECTOR TOOL | 1 | |
| WT-00198-16 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| WT-00198-4 | TOOL, CHILL BLOCK AND PROTECTOR | 1 | |
| WT-00198-7 | CHILL BLOCK-AND- PROTECTOR-TOOL | 1 | |
| WT00198 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-11 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-12 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-16 | CHILL BLOCK AND PROTECTOR TOOL | 1 | |
| WT00198-6 | CHILL BLOCK AND PROTECTOR TOOL | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
