| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2225M27P02 | BLADE | 1 | |
| 231940A0W0 | BLADE | 1 | |
| 2403M91P06 | BLADE | 1 | |
| 27132 | BLADE | 1 | |
| 1017868 | BLADE | 1 | |
| 2858A13 | BLADE | 1 | |
| 2858A14 | BLADE | 1 | |
| 2858A15 | BLADE | 1 | |
| 2858A16 | BLADE | 1 | |
| 2858A17 | BLADE | 1 | |
| 2858A18 | BLADE | 1 | |
| 2858A19 | BLADE | 1 | |
| 2858A21 | BLADE | 1 | |
| 2858A22 | BLADE | 1 | |
| 2858A23 | BLADE | 1 | |
| 2858A24 | BLADE | 1 | |
| 2858A27 | BLADE | 1 | |
| 2858A28 | BLADE | 1 | |
| 2858A35 | BLADE | 1 | |
| 301-330-113-0 | BLADE | 1 | |
| 301-330-115-0 | BLADE | 1 | |
| 3SF5673-1 | BLADE | 1 | |
| 3SF5673-2 | BLADE | 1 | |
| 3SF848-1 | BLADE | 1 | |
| 3SF848-501 | BLADE | 1 | |
| 4260200036 | BLADE | 1 | |
| 4260200046 | BLADE | 1 | |
| 4260200056 | BLADE | 1 | |
| 4260201476 | BLADE | 1 | |
| 4260220066 | BLADE | 1 | |
| 4260220076 | BLADE | 1 | |
| 4260220646 | BLADE | 1 | |
| 45-1987-1 | BLADE | 5 | |
| 45-2020-1 | BLADE | 5 | |
| 45-2828-1 | BLADE | 1 | |
| 57414 | BLADE | 3 | |
| 654-45-2828-1 | BLADE | 1 | |
| 8400 | BLADE | 5 | |
| 95-92207-0001 | BLADE | 1 | |
| 98L52108601224 | BLADE | 1 | |
| 98S270050041090 | BLADE | 1 | |
| 98S270050041250 | BLADE | 1 | |
| 98S270050041500 | BLADE | 1 | |
| BLC1881M52G05-2 | BLADE | 1 | |
| D535P0002101 | BLADE | 1 | |
| FB6B005 | BLADE | 1 | |
| FB6B006 | BLADE | 1 | |
| FB6B008 | BLADE | 1 | |
| GT13906 | BLADE | 1 | |
| GT13910 | BLADE | 1 | |
| GT13911 | BLADE | 1 | |
| GT13913 | BLADE | 1 | |
| HSP712 | BLADE | 1 | |
| IAE3R19129 | BLADE | 1 | |
| J32072-13 | BLADE | 1 | |
| K-6492 | BLADE | 1 | |
| K-6499 | BLADE | 2 | |
| K6492 | BLADE | 1 | |
| K6499 | BLADE | 2 | |
| L-5211 | BLADE | 3 | |
| L38969G01 | BLADE | 1 | |
| L5563 | BLADE | 4 | |
| LB-197 | BLADE | 3 | |
| LB727 | BLADE | 1 | |
| LB728 | BLADE | 1 | |
| LB729 | BLADE | 1 | |
| NYZ701110 | BLADE | 1 | |
| SP14501 | BLADE | 1 | |
| SP14697 | BLADE | 1 | |
| SSDP31IRRB | BLADE | 1 | |
| ST2318PC-11 | BLADE | 1 | |
| TMCW1D1 | BLADE | 1 | |
| TMCW2810 | BLADE | 1 | |
| TMCW2A16 | BLADE | 1 | |
| X-ACTO16 | BLADE | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| DAPT60-0126-00 | TOOL-PROP PITCH CHANGE (BLADE BAT) | 8 | |
| (CALIB) 21116A0 | LIFTER BLADE 14SF | 1 | |
| (CALIB) 21116A1 | LIFTER BLADE | 1 | |
| (CALIB) AGE16515 | COVER, BLADE (RAT) (CALIBRATION) | 1 | |
| (CALIB) GS23137-1 | BLADE SEAL COMPRESSOR | 1 | |
| (CALIB) GS23420-1 | BLADE SEAL COMPRESSOR | 1 | |
| (CALIB) RRT076133 | ULTRA PHASE ARRAY FAN BLADE INSPECTION (CALIBRATION) | 1 | |
| (CALIB) UT2000 | FAN BLADE TEST KIT (CALIBRATION) | 2 | |
| 0061R7834 | STANDARD TEST ARM AND BLADE ASSEMBLY | 1 | |
| 02-109-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) | 1 | |
| 02-125 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-125-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-156 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-156-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-187 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 2 | |
| 02-187-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-218 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-218-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-250 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-250-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-27009 | Circle Cutters (Description: Circle Cutter (7/8" to 4")) (Add to cart: Add To Cart) (Description: Circle Cutter (1" to 6")) (Add to cart: Add To Cart) (Description: Replacement Cutting Blade) (Add to cart: Add To Cart) | 1 | |
| 02-281 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-281-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-2A | H.S.S. Adjustable Hand Reamers (Range of adjustment: 7/16" - 15/32" (11.1 - 11.9 mm)) (Blade length: 1-5/8") (Overall length: 5-1/4" (133.4 mm)) (Add to cart: Contact us to order) | 1 | |
| 02-312 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-312-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-343 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-343-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-375 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-375-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-3A | H.S.S. Adjustable Hand Reamers (Range of adjustment: 7/16" - 15/32" (11.1 - 11.9 mm)) (Blade length: 1-5/8") (Overall length: 5-1/4" (133.4 mm)) (Add to cart: Contact us to order) (Range of adjustment: 13/32" - 7/16" (10.3 - 11.1 mm)) (Blade length: 1-1/2 | 1 | |
| 02-406 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-406-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-4A | H.S.S. Adjustable Hand Reamers (Range of adjustment: 7/16" - 15/32" (11.1 - 11.9 mm)) (Blade length: 1-5/8") (Overall length: 5-1/4" (133.4 mm)) (Add to cart: Contact us to order) (Range of adjustment: 13/32" - 7/16" (10.3 - 11.1 mm)) (Blade length: 1-1/2 | 1 | |
| 02-5A | H.S.S. Adjustable Hand Reamers (Range of adjustment: 7/16" - 15/32" (11.1 - 11.9 mm)) (Blade length: 1-5/8") (Overall length: 5-1/4" (133.4 mm)) (Add to cart: Contact us to order) (Range of adjustment: 13/32" - 7/16" (10.3 - 11.1 mm)) (Blade length: 1-1/2 | 1 | |
| 02-6A | H.S.S. Adjustable Hand Reamers (Range of adjustment: 7/16" - 15/32" (11.1 - 11.9 mm)) (Blade length: 1-5/8") (Overall length: 5-1/4" (133.4 mm)) (Add to cart: Contact us to order) (Range of adjustment: 13/32" - 7/16" (10.3 - 11.1 mm)) (Blade length: 1-1/2 | 1 | |
| 02-7A | H.S.S. Adjustable Hand Reamers (Range of adjustment: 7/16" - 15/32" (11.1 - 11.9 mm)) (Blade length: 1-5/8") (Overall length: 5-1/4" (133.4 mm)) (Add to cart: Contact us to order) (Range of adjustment: 13/32" - 7/16" (10.3 - 11.1 mm)) (Blade length: 1-1/2 | 1 | |
| 02-8A | H.S.S. Adjustable Hand Reamers (Range of adjustment: 7/16" - 15/32" (11.1 - 11.9 mm)) (Blade length: 1-5/8") (Overall length: 5-1/4" (133.4 mm)) (Add to cart: Contact us to order) (Range of adjustment: 13/32" - 7/16" (10.3 - 11.1 mm)) (Blade length: 1-1/2 | 1 | |
| 02-938 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-938-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 7/64") (Decimal equivalent: .1094") (Add to cart: Add To Cart) (Description: Complete T | 1 | |
| 02-MA-2.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) | 1 | |
| 02-MA-2.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-2.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-3.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-4.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-5.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MA-5.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-5.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-5.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-6.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.0 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.0-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.5 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 02-MB-7.5-1 | Burraway Deburring Tools (Description: Complete Tool) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Extra Blade) (Hole size: 2.0 mm) (Decimal equivalent: .0787") (Add to cart: Add To Cart) (Description: Complete | 1 | |
| 021-922-011 | BLADE SEAL COMPRESSOR | 2 | |
| 04-100 | Chip Chasers (Blade length: 2-3/4") (Add to cart: Add To Cart) | 1 | |
| 04-111 | Malco® Crimpers (Jaw width: 1-1/4" D) (Overall length: 8" (203 mm)) (Type: Single Blade) (Add to cart: Add To Cart) | 1 | |
| 04-200 | Chip Chasers (Blade length: 2-3/4") (Add to cart: Add To Cart) (Blade length: 5-7/8") (Add to cart: Add To Cart) | 1 | |
| 04-22022 | Multi-Burr (Description: Multi-Burr With 5 Blades) (Add to cart: Add To Cart) | 1 | |
| 04-22065 | Double Edge Deburr Tool (Material capacity: 1/32" to 1/2") (Add to cart: Add To Cart) (Material capacity: One Set of Replacement Blades) (Add to cart: Add To Cart) | 1 | |
| 04-C5 | Malco® Crimpers (Jaw width: 1-1/4" D) (Overall length: 8" (203 mm)) (Type: Single Blade) (Add to cart: Add To Cart) (Jaw width: 1-5/8" D) (Overall length: 10" (254 mm)) (Type: Five Blade) (Add to cart: Add To Cart) | 1 | |
| 04-E-100 | Multi-Burr Replacement Blades (For use on cables: Steel & Aluminum) (Add to cart: Add To Cart) | 1 | |
| 04-E-101 | Multi-Burr Replacement Blades (For use on cables: Steel & Aluminum) (Add to cart: Add To Cart) (For use on cables: Small Holes In Steel & Alum.) (Add to cart: Add To Cart) | 1 | |
| 04-E-102 | Multi-Burr Replacement Blades (For use on cables: Steel & Aluminum) (Add to cart: Add To Cart) (For use on cables: Small Holes In Steel & Alum.) (Add to cart: Add To Cart) (For use on cables: Small Holes In Brass & Cast Ir) (Add to cart: Add To Cart) | 1 | |
| 04-E-111P | SHAVIV® AEROBURR DEBURRING SETS ( DESCRIPTION: REPLACEMENT BLADES-THIN POINTED, HEAVY-DUTY 3.2 MM ) | 1 | |
| 04-E-200 | Multi-Burr Replacement Blades (For use on cables: Steel & Aluminum) (Add to cart: Add To Cart) (For use on cables: Small Holes In Steel & Alum.) (Add to cart: Add To Cart) (For use on cables: Small Holes In Brass & Cast Ir) (Add to cart: Add To Cart) (For | 1 | |
| 04-E-350 | Multi-Burr Replacement Blades (For use on cables: Steel & Aluminum) (Add to cart: Add To Cart) (For use on cables: Small Holes In Steel & Alum.) (Add to cart: Add To Cart) (For use on cables: Small Holes In Brass & Cast Ir) (Add to cart: Add To Cart) (For | 1 | |
| 04-K380 | TELESCOPING DEBURR TOOL W/ 3/4" BLADE | 1 | |
| 060-72-00-8V272 | VANE 7-8 STG. HOLDER-CMMBLADES TIP GRINDER ACCESSOR | 1 | |
| 07-010008 | QUOTE FOR UT FAN BLADE INSPECTION CABLE | 2 | |
| 07-666 | RIVET BUSTER 5/8" BLADE WIDTH,.401 SHANK | 1 | |
| 08-0111-6000 | Sling, Blade, Hs 14sf-7 | 7 | |
| 08-0115-4000 | SLING: PROP BLADE, | 4 | |
| 10906 | BODY FILE BLADE FINE | 1 | |
| 103801 | R BLADE FOR SAILRITE? EDGE HOTKNIFE | 1 | |
| 104097 | F BLADE FOR SAILRITE? EDGE HOTKNIFE | 1 | |
| 1006800 | BLADE CLAMP ASSEMBLY | 1 | |
| 1006845 | RUPHIS BLADE CLAMP | 3 | |
| 1017815 | TAP TEST KIT - WIDE CHORD FAN BLADE INSPECTION | 1 | |
| 1031011 | BLADE SQGE | 1 | |
| 1031331 | BLADE SQGE | 1 | |
| 08300530 | 1240-*OBS*BITS SCREWDRIVER BLADE | 1 | |
| 08300540 | 1241-*OBS*BITS SCREWDRIVER BLADE | 1 | |
| 08300645 | 1243-*OBS*BITS SCREWDRIVER BLADE | 1 | |
| 08301280 | 1249-*OBS*BITS SCREWDRIVER BLADE | 1 | |
| 017710000 | 1771-UTILITY KNIFE WITH 3 BLADES | 1 | |
| 017710010 | 1771 RL-10 BLADES FOR KNIVES 1771A - F | 1 | |
| 0C1277G01 | FIXTURE, BLADE TIP GRIND (BLADE TIP GRIND FIXTURE) | 1 | |
| 0MAT478, | ENGINE BLADES RAPID RE-LUB | 1 | |
| 1-1025 | Replacement Cutting Blade Cover Screw for LaceLok Installation Tool | 1 | |
| 10-07797A | BLADE CLAMP KIT | 1 | |
| 10-61329-8 | BLADE ASSY-WIPER WINDSHIELD | 1 | |
| 10-K14 | Notcher Tool (Size/diameter: -) (For use with: BLADES ONLY (#6, 8, 10 & 1/4")) (Add to cart: Add To Cart) | 1 | |
| 10-K18 | Notcher Tool (Size/diameter: -) (For use with: BLADES ONLY (#6, 8, 10 & 1/4")) (Add to cart: Add To Cart) (Size/diameter: -) (For use with: BLADES ONLY (#4)) (Add to cart: Contact us to order) | 1 | |
| 10-L3600-1/4 | Notcher Tool (Size/diameter: -) (For use with: BLADES ONLY (#6, 8, 10 & 1/4")) (Add to cart: Add To Cart) (Size/diameter: -) (For use with: BLADES ONLY (#4)) (Add to cart: Contact us to order) (Size/diameter: 1/4") (For use with: Flat Head Rivnuts) (Add t | 1 | |
| 10-L3600-10 | Notcher Tool (Size/diameter: -) (For use with: BLADES ONLY (#6, 8, 10 & 1/4")) (Add to cart: Add To Cart) (Size/diameter: -) (For use with: BLADES ONLY (#4)) (Add to cart: Contact us to order) (Size/diameter: 1/4") (For use with: Flat Head Rivnuts) (Add t | 1 | |
| 10-L3600-4 | Notcher Tool (Size/diameter: -) (For use with: BLADES ONLY (#6, 8, 10 & 1/4")) (Add to cart: Add To Cart) (Size/diameter: -) (For use with: BLADES ONLY (#4)) (Add to cart: Contact us to order) (Size/diameter: 1/4") (For use with: Flat Head Rivnuts) (Add t | 1 | |
| 10-L3600-6 | Notcher Tool (Size/diameter: -) (For use with: BLADES ONLY (#6, 8, 10 & 1/4")) (Add to cart: Add To Cart) (Size/diameter: -) (For use with: BLADES ONLY (#4)) (Add to cart: Contact us to order) (Size/diameter: 1/4") (For use with: Flat Head Rivnuts) (Add t | 1 | |
| 10-L3600-8 | Notcher Tool (Size/diameter: -) (For use with: BLADES ONLY (#6, 8, 10 & 1/4")) (Add to cart: Add To Cart) (Size/diameter: -) (For use with: BLADES ONLY (#4)) (Add to cart: Contact us to order) (Size/diameter: 1/4") (For use with: Flat Head Rivnuts) (Add t | 1 | |
| 1006845-3 | UH-60 KIT BLADE CLAMP | 1 | |
| 1019-120 | PROPELLOR/SPINNER COVER, 3-blade | 1 | |
| 1019-125 | INSULATED PROPELLOR/SPINNER COVER, 3-blade | 1 | |
| 105-13101W8 | MAIN ROTOR BLADES TORQUE WRENCH | 1 | |
| 105-15103W6 | MAIN ROTOR BLADES BONDING FIXTURE | 1 | |
| 105-31743W2 | BLADE RACK | 1 | |
| 109-3101-10-1 | MAIN ROTOR BLADE STAND (MD P/N: 369D299913−37) | 1 | |
| 109-3101-14-1 | MAIN ROTOR BLADE TRIM TAB GAUGE | 1 | |
| 109-3101-16-1 | M/R BLADE STAND | 1 | |
| 109-3101-17-1 | TROLLEY M/R BLADE TRANSPORT | 1 | |
| 109-3101-17-101 | MAIN ROTOR BLADE CRADLE | 1 | |
| 109-3101-19-1 | PIN,M/R BLADE RETENTION BOLT INSTALLATION | 1 | |
| 109-3101-58-1 | MR/TR BLADE TAPPING HAMMER - STEEL | 1 | |
| 109-3101-58-2 | HAMMER, ALUMINUM, BLADE CORROSION AND VOIDS DETEC | 3 | |
| 109-3130-01-117 | TOOL,TAIL ROTOR STATIC BALANCING (USE WITH TAIL ROTOR AND BLADE ASSY PN 109-8131-02) (NSCM A0126) | 1 | |
| 109-3130-83-101 | TOOL SET T/R HUB AND BLADE ASSEMBLY AND CROSSHEAD | 1 | |
| 109-3130-87-143 | TOOL REMOVAL/INSTALLATION BLADE | 1 | |
| 109-3131-02-101 | TR BLADE BUSHING REMOVE/INSTALL FIXTURE - NEW BLADES | 1 | |
| 109-3131-02-103 | SUPPORT ASSY BLADE | 1 | |
| 109-3131-04-101 | TOOL BUSHING BLADE (STRAP) | 2 | |
| 109-3901-26-127 | WRENCH TAIL ROTOR HUB, BLADE ASSY REM/INST | 2 | |
| 109-39DI-26-127 | MAINTENANCE KIT, AIRCRAFT (T/R HUB & BLADE ASSEMBLY INSTALLATION) | 1 | |
| 10C1108 | PULLER, SPACER - STG 1 FAN BLADE, MECHANICAL | 1 | |
| 10C1108G01 | CF34-10 FIXTURE PRELOAD SPACER STG 1 FAN BLADE 195 | 1 | |
| 10C1108G02 | PULLER-SPACER STAGE 1 FAN BLADE | 4 | |
| 10C1113 | FIXTURE REMOVE SPACERSTAGE 1 FAN BLADE HYDRAULIC | 1 | |
| 10C1113G01 | FAN BLADE REMOVAL TO | 2 | |
| 10C1115G01 | FIXTURE, HORIZONTAL - CHILL, HPT ROTOR , AFT BLADE RETAINER. | 1 | |
| 10C1128G01 | FIXTURE, PUSH - HPT ROTOR, AFT, BLADE RETAINER | 1 | |
| 10C1263 | STAND, STORAGE - FAN BLADES | 1 | |
| 10C1263G01 | STAND, STORAGE - FAN BLADES | 1 | |
| 10C1272G02 | FIXTURE, VIBRATE - COMPRESSOR ROTOR BLADES, REMOVE AND INSTALL (VIBRATE FIXTURE) | 1 | |
| 10C1277 | GRINDER - BLADE TIP - HPC ROTOR | 1 | |
| 10C1277G01 | FIXTURE, BLADE TIP GRIND (BLADE TIP GRIND FIXTURE) | 1 | |
| 10C1277G02 | FIXTURE, BLADE TIP GRIND (BLADE TIP GRIND FIXTURE) | 1 | |
| 10EV2000G01 | GO/NO-GO GAUGE, BLADE LPT ROTOR - STG 5 | 1 | |
| 11-01-0101 | Flat Blade Female Crimp Terminal, 14-20 AWG | 1 | |
| 11-515 | Stanley 11-515 Single Edge Razor Blades - Pack of 100 | 2 | |
| 110-340 | BLADE ANTENNA | 10 | |
| 11095/20 | FEELER GAUGE - 20 BLADE, 0,05 - 1 mm | 4 | |
| 1120-15115 | TRACKING REFLECTOR BRACKET WITH REFLECTOR 8503 FOR TYPE 2 MAIN ROTOR BLADES | 1 | |
| 117-15004W6 | MAIN ROTOR BLADE BUSHING REPLACEMENT KIT | 1 | |
| 117-15004W61 | RETROFIT TOOL 00 BLADE | 1 | |
| 1180-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| 1180-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| 11800-3 | FasTrakT Day and Night Optical Blade Tracker | 1 | |
| 11AC-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 11C3015 | CONTAINER - HPT ROTOR STAGE 1 BLADES | 1 | |
| 11C3017 | FIXTURE - INSTALL/REMOVE-STG 2 AFT BLADE RETAINER | 1 | |
| 11C3019 | RETAINER, BLADE-SLAVE, HPT ROTOR, STG 2 | 1 | |
| 11C3032 | RETAINER - BLADE-SLAVE - HPT ROTOR - STG 1 | 1 | |
| 11C3041 | FIXTURE - CLAMPING-HPT ROTOR BLADE STG 1 | 1 | |
| 11C3126 | FIXTURE - CHILL - HPT BLADE RETAINER - STAGE 2 (BLADE RETAINER CHILL FIXTURE) | 1 | |
| 11C3137 | NOTCH TOOL TIP-HPT BLADE STG 1 | 1 | |
| 11C3140 | PROTECTOR-HPT STG 2 NOZZLE&BLADES | 1 | |
| 11C3323G01 | TOOL, REMOVAL - STAGE 1 FAN BLADE SPACER | 2 | |
| 11C3398 | TOOL, REMOVAL - STG 1 BLADE | 1 | |
| 11C3398G01 | Tool - Removal, Spacer Fan Blade, Slide Hammer | 4 | |
| 11C3403 | GAGE - TAPER-FAN BLADE/CASE | 1 | |
| 11C3403P02 | GAGE - TAPER-FAN BLADE/CASE | 1 | |
| 11C3403P03 | GAGE - TAPER-FAN BLADE/CASE | 1 | |
| 11C3403P04 | GAGE, TAPER - FAN BLADE/CASE | 1 | |
| 11C3403P05 | GAGE - TAPER-FAN BLADE/CASE | 1 | |
| 11C3403P06 | GAGE - TAPER-FAN BLADE/CASE | 1 | |
| 11C3405P02 | CONTAINER - GENX-1B SPLIT ENGINE COMPONENTS & FAN BLADES | 2 | |
| 11C3413 | FIXTURE - RESTRAIN-HPT ROTOR BLADES - ST 2 | 1 | |
| 11C3414P01 | BLENDING TOOL, BORESCOPE HPC S1-9 BLADES | 1 | |
| 11C3419 | PROTECTOR SET-HPC TURBINE ROTOR BLADES | 1 | |
| 11C3419G01 | PROTECTOR SET - HPC ROTOR BLADES | 1 | |
| 11C3528 | TABLE - ROTARYY-LPT BLADE INSTALL (US) | 1 | |
| 11C4296G01 | Gauge - Fan Blade/Case Gap (Capacitance Measurement) | 1 | |
| 11C4413G05 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4563 | FIXTURE - SEPARATION- INTERSTAGE SEAL / BLADE RETAINER HPTR | 1 | |
| 11C4594 | CAROUSEL - STORAGE - STG1 BLADE GENX | 1 | |
| 11C4594G01 | TOOL - STORAGE CARROUSEL, STAGE 1 FAN BLADE SET | 1 | |
| 11C4594G02 | FIXTURE, FAN BLADE TRANSPORTION CAROUSEL | 1 | |
| 11C4609 | FIXTURE - INSTALL/REMOVE -TRIM BALANCE CLIP - STAGE 6 LPT BLADE | 1 | |
| 11C4609G04 | FIXTURE, INSTALL/REMOVE - TRIM BALANCE CLIP - STAGE 7 LPT BLADE | 1 | |
| 11C4621 | RETAINER BLADE - SLAVE - HPTR STG 1 | 1 | |
| 11C4645 | FIXTURE, SPREAD FAN BLADE | 1 | |
| 11C4645G01 | Fixture - Fan Blade Spreader | 3 | |
| 11C4650 | FIXTURE - REMOVE - HPT BLADE RET - STG 1 | 1 | |
| 11C4654G01 | FIXTURE-FAN BLADE SPREADER (SPL-12466) | 1 | |
| 11C4874G01 | GENX HPT BLADE INSPECTION TOOLKIT (BIT) | 1 | |
| 11С4874G01 | НРТ BLADE INSPECTION TOOLKIT | 1 | |
| 12-04969 | PROPELLER BLADE MOUNTED MAGNETO TIMING DEVICE | 1 | |
| 12-1012-01 | TEST SET, ULTRAX BLADE BURN POD | 1 | |
| 12-26-A | MOORE & WRIGHT 12-26-A HARDENED STEEL FEELER GAUGE, 26 BLADES | 2 | |
| 120-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 120-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 12053R | 6-PIECE REPLACEMENT BLADES | 1 | |
| 122-101 | Mitutoyo 122-101 Blade Micrometer 0-25mm | 1 | |
| 122-102 | Mitutoyo 122-102 Blade Micrometer 25-50mm | 1 | |
| 122-103 | Mitutoyo 122-103 Blade Micrometer 50-75mm | 1 | |
| 122-104 | Mitutoyo 122-104 Blade Micrometer 75-100mm | 1 | |
| 122-105 | Mitutoyo 122-105 Blade Micrometer 100-125mm | 1 | |
| 122-106 | Mitutoyo 122-106 Blade Micrometer 125-150mm | 1 | |
| 122-107 | Mitutoyo 122-107 Blade Micrometer 150-175mm | 1 | |
| 122-108 | Mitutoyo 122-108 Blade Micrometer 175-200mm | 1 | |
| 122-125 | BLADE MICROMETER 0"-1" | 1 | |
| 122-126 | Mitutoyo 122-126 Blade Micrometer 1-2" | 1 | |
| 122-127 | Mitutoyo 122-127 Blade Micrometer 2-3" | 1 | |
| 122-128 | Mitutoyo 122-128 Blade Micrometer 3-4" | 1 | |
| 1229180 | WIRE STRIPPER BLADES | 1 | |
| 12E4-400 | BLADE COVERS (set of 2) | 1 | |
| 12E4-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 2) | 1 | |
| 12E4-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| 12L2065-90 | Dotco® Oscillating Saws (Type: Inline) (Blade capacity: 2-1/2") (Overall length: 8-7/8" (225 mm)) (Add to cart: Add To Cart) | 1 | |
| 12L2240-90 | Dotco® Oscillating Saws (Type: Inline) (Blade capacity: 2-1/2") (Overall length: 8-7/8" (225 mm)) (Add to cart: Add To Cart) (Type: Right Angle) (Blade capacity: 2-1/2") (Overall length: 10-7/8" (276 mm)) (Add to cart: Contact us to order) | 1 | |
| 133-80-1441 | STATIC BALANCE FAN DISK BLADED | 1 | |
| 135M-11 | 135M Strobex Blade Tracker | 6 | |
| 135M-12 | Strobex Blade Tracker 901-8620 | 2 | |
| 135M11 | STROBEX BLADE TRACKER | 6 | |
| 1375308-1 | PREMIUM IMPACT TL/W BLADE 110 | 1 | |
| 1375308-3 | PREMIUM IMPACT TL/W BLADE 110 | 1 | |
| 139348 | 139348;390XOPT624 Collins 721S Blade AutoTest;Intfc Cbl;10dB Attenu;Req Opt059;061 | 1 | |
| 14-0930 | Saw blade | 1 | |
| 14-1398 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1400 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1740 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1741 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1742 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1743 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1744 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1745 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1746 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1875 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 7 | |
| 14-1890 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1891 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1892 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-1895 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2146 | Saw Blades (Type: High Speed Steel) (Diameter & teeth: 2-1/2" x 80) (Maximum cut: 9/16" D) (Recommended use: 16 Gauge Steel) (Add to cart: Contact us to order) | 1 | |
| 14-2147 | DOTCO SAW BLADES 7/16 ARBOR DIA=2-1/2 X 44 CUT=9 | 1 | |
| 14-2395 | SAW BLADES | 1 | |
| 14-2690 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2697 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2700 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 3 | |
| 14-2701 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2710 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2711 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 14-2928 | Saw Blades (Type: High Speed Steel) (Diameter & teeth: 2-1/2" x 80) (Maximum cut: 9/16" D) (Recommended use: 16 Gauge Steel) (Add to cart: Contact us to order) (Type: High Speed Steel) (Diameter & teeth: 2-1/2" x 44) (Maximum cut: 9/16" D) (Recommended us | 1 | |
| 14-2929 | Saw Blades (Type: High Speed Steel) (Diameter & teeth: 2-1/2" x 80) (Maximum cut: 9/16" D) (Recommended use: 16 Gauge Steel) (Add to cart: Contact us to order) (Type: High Speed Steel) (Diameter & teeth: 2-1/2" x 44) (Maximum cut: 9/16" D) (Recommended us | 1 | |
| 14-2930 | Saw Blades (Type: High Speed Steel) (Diameter & teeth: 2-1/2" x 80) (Maximum cut: 9/16" D) (Recommended use: 16 Gauge Steel) (Add to cart: Contact us to order) (Type: High Speed Steel) (Diameter & teeth: 2-1/2" x 44) (Maximum cut: 9/16" D) (Recommended us | 1 | |
| 140-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 140-160 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 14544 | FIRST QUALITY SCALE COMBINATION SQUARE BLADE 24" SILVER (RIGID) | 1 | |
| 150-161 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 150-163 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 1521-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| 1521-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| 15AC-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 16-18RB | Tennsmith® Notcher (Capacity brass & copper: 16 ga. (notching) 18 ga.) (Blades included: Regular) (Shipping weight: 170 lbs (77 kgs)) (Add to cart: Add To Cart) | 1 | |
| 16-18TB | Tennsmith® Notcher (Capacity brass & copper: 16 ga. (notching) 18 ga.) (Blades included: Regular) (Shipping weight: 170 lbs (77 kgs)) (Add to cart: Add To Cart) (Capacity brass & copper: 16 ga. (notching) 18 ga.) (Blades included: Tab) (Shipping weight: 1 | 1 | |
| 162-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 162-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 170-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 170-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 172-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 172-152 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 172-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 172-156 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 177-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 177-121 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 177-122 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 177-123 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 1771 | 1771-UTILITY KNIFE WITH 3 BLADES | 1 | |
| 1771 RL | 1771 RL-10 BLADES FOR KNIVES 1771A - F | 1 | |
| 180-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 180-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 180-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 180-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 1810 | SAW BLADE 6" x 14TPI (5PK) | 1 | |
| 1811 | SAW BLADE 6" x 18TPI (5PK) | 1 | |
| 1812 | SAW BLADE 4" x 18TPI (5PK) | 1 | |
| 1813 | SAW BLADE 4" x 14TPI (5PK) | 1 | |
| 1814 | SAW BLADE 6" X 24TPT (5PK) | 1 | |
| 1816 | SAW BLADE 6IN X 6TPI 5PK | 1 | |
| 1819 | SAW BLADE 12" x 5/8TPI (5PK) | 1 | |
| 182-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 182-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 182-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 182-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 2 | |
| 1823 | Sioux Tool - Replacement Blades for Reciprocating Saw - Description: Bi-Metal Blade, 18TPI | 1 | |
| 1824 | Sioux Tool - Replacement Blades for Reciprocating Saw - Description: Bi-Metal Blade, 24TPI | 1 | |
| 1824B | BLADE BIMETAL 24TPI 4IN LON | 1 | |
| 1825 | Sioux Tool - Replacement Blades for Reciprocating Saw - Description: Bi-Metal Blade, 32TPI | 1 | |
| 187-901 | 32-BLADE FEELER GAUGE SET WITH A RANGE FROM 0.0015" TO 0.040", MADE OF HIGH-QUALITY STAINLESS STEEL FOR DURABILITY. | 1 | |
| 188-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 188-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 188-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 188-135 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 1881M52G05 | BLADE HPT B2 | 1 | |
| 1881M52G15 | HPT BLADE 2 | 1 | |
| 1888 | SAW BLADE(100 TOOTH)SET OF 12 | 2 | |
| 18C1326 | FXTR, GUIDE - BOOSTER / FAN BLADE | 1 | |
| 1900C-150 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 1900C-155 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 1900D-145 | PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| 1900D-146 | INSULATED PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| 19401-04000100 | TRI-STAND, BLADES | 1 | |
| 195-150 | PROPELLOR/SPINNER COVER with spinner, 2 blade | 1 | |
| 195-155 | PROPELLOR/SPINNER COVER no spinner, 2 blade | 1 | |
| 195-170 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 195-175 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 1957M10P01 | HPT BLADE -7B | 1 | |
| 1957M99P01 | HPT STG 2 BLADE | 1 | |
| 1957M99P02 | HPT STG 2 BLADE | 1 | |
| 1957M99P03 | HPT STG 2 BLADE | 1 | |
| 1958534 | MAIN ROTOR BLADE LOCK | 1 | |
| 1C5671 | PROTECTOR BLADE SET | 1 | |
| 1C5671G01 | PROTECTOR SET - C/R BLADE TIPS | 1 | |
| 1C5749 | SET C/R BLADES | 1 | |
| 1C5906 | TOOL SET, INSP-LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| 1C5906 REV H | TOOL SET, INSPECTION-LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| 1C6103 | FIXTURE, BLADE INSTALL/REMOVE - PT ROTOR | 1 | |
| 1C6147 | FIXTURE SET, REPAIR - PT ROTOR BLADES | 1 | |
| 1C6148 | TOOL SET, GRIND - PT ROTOR BLADES | 1 | |
| 1C6455 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 1 | 1 | |
| 1C6456 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 2 | 1 | |
| 1C6457 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 3 | 1 | |
| 1C6458 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 4 | 1 | |
| 1C6459 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 5 | 1 | |
| 1C6460 | FIXTURE, GRIND - PT ROTOR BLADES, STAGE 6 | 1 | |
| 1C6702 | TOOL SET - SEATING, PT ROTOR BLADE RETAINER | 1 | |
| 1C6903G01 | SCALE, MOMENT WEIGH - PT ROTOR BLADES | 1 | |
| 1C6957 | FIXTURE, SHOT PEEN - C/R BLADE | 1 | |
| 1C6957G01 | FIXTURE, SHOT PEEN - C/R BLADE | 1 | |
| 1C8000G01 | FIXTURE SPREADER, COMPRESSOR ROTOR BLADES STAGE 1 | 1 | |
| 1C8025 | PT BLADE IN TOOL | 1 | |
| 1C8052 | TOOL STARTING & STRAIGHTENING RTNR COMPR. RTR BLADE, ST | 1 | |
| 1C8052 REV B | TOOL STARTING & STRAIGHTENING RTNR COMPR. RTR BLADE, ST | 1 | |
| 1C8052G01 | TOOL STG 1 C/R BLADE RETAINER | 1 | |
| 1C8052G02 | TOOL, INSTALL - COMPRESSOR ROTOR BLADE, STAGE 1 | 1 | |
| 1C8312G01 | TOOL SET INSTAL/REMOVE HPC STG 1 AND 2 BLADE RETAINERS | 1 | |
| 1J12004 | MD90 FAN BLADE TOOLING | 1 | |
| 1P16062 | RING, SUPPORT - ROTOR, HPT SECOND STAGE BLADES | 1 | |
| 1P16146 | BASE, REMOVE - ROTOR, HPT FIRST STG BLADES | 1 | |
| 1P16158 | BASE, REMOVE - ROTOR, HPT FIRST STG BLADES | 1 | |
| 2-11-987 | STANLEY® 1992 ROUNDED TIP SAFETY UTILITY BLADE (10 PK) | 1 | |
| 2-141-036-51 -F1D | Fixture, Grinding, Blades | 1 | |
| 2-141-036-51 -F2D | Fixture, Grinding, Blades | 1 | |
| 200835 | DOUBLE BLADE ADJUSTING TOOL | 1 | |
| 200839 | DOUBLE BLADE ASJUSTING TOOL | 1 | |
| 2024435 | Retainer-Blade | 1 | |
| 2024435-1 | RETAINER BLADE | 1 | |
| 204-400 | BLADE COVERS, original 204 blades (set of 2) | 1 | |
| 204-405 | BLADE COVERS, 205 model blades (set of 2) | 1 | |
| 204-410 | BLADE COVERS (COLD WEATHER TYPE), original 204 blades (set of 2) | 1 | |
| 204-415 | BLADE COVERS (COLD WEATHER TYPE), 205 model blades (set of 2) | 1 | |
| 204-420 | BLADE COVERS, Padded For Hail Protection (set of 2) | 1 | |
| 204-500 | FRONT BLADE TIE-DOWN | 1 | |
| 204-510 | REAR BLADE TIE-DOWN | 1 | |
| 204-515 | BLADE TIE-DOWNS, FRONT & REAR (set of 2) | 1 | |
| 204-620 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| 205-400 | BLADE COVERS (set of 2) | 1 | |
| 205-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 2) | 1 | |
| 205-500 | FRONT BLADE TIE-DOWN | 1 | |
| 205-510 | REAR BLADE TIE-DOWN | 1 | |
| 205-620 | TAIL ROTOR BLADE TIE-DOWN | 1 | |
| 20549SI | BLADE COVERS (COLD WEATHER TYPE) (SET OF | 5 | |
| 206-015-011-119 | BLADE ASSY M/R | 1 | |
| 206-016-201-103 | BELL HELICOPTER BLADE ASSY | 1 | |
| 206-016-201-135 | BLADE AASY, TAIL ROT | 1 | |
| 206-130 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 206-135 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 206-140 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 206-145 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 206-215-001-101 | BENDER ASSEMBLY, TRIM TAB, MAIN ROTOR BLADE | 1 | |
| 206-215-002-101 | GAUGE ASSEMBLY, MAIN ROTOR BLADE | 1 | |
| 206215022 | Guage Assy M/R Blade | 1 | |
| 206B-400 | BLADE COVERS (set of 2) | 1 | |
| 206B-401 | BLADE COVERS, cold weather, padded for hail protection (set of 2) | 1 | |
| 206B-405 | BLADE COVERS, cold weather w/tie-down (set of 2) | 1 | |
| 206B-410 | BLADE COVERS, cold weather type (set of 2) | 1 | |
| 206B-411 | BLADE COVERS w/tie-down add-on detail (set of 2) | 1 | |
| 206B-412 | BLADE COVERS (padded for hail protection) w/Tie Down Detail (set of 2) | 1 | |
| 206B-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| 206B-510 | BLADE TIE-DOWN (front only) | 1 | |
| 206B-610 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| 206L-400 | BLADE COVERS (set of 2) | 1 | |
| 206L-401 | BLADE COVERS w/hail protection (set of 2) | 1 | |
| 206L-410 | BLADE COVERS, cold weather type (set of 2) | 1 | |
| 206L-411 | BLADE COVERS, cold weather w/hail protection (set of 2) | 1 | |
| 206L-412 | BLADE COVERS, cold weather w/hail protection (double padded) (set of 2) | 1 | |
| 206L-413 | BLADE COVERS, cold weather w/tie-down add-on detail (set of 2) | 1 | |
| 206L-415 | BLADE COVERS w/ tie-down add-on detail (set of 2) | 1 | |
| 206L-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| 206L-515 | BLADE TIE-DOWNS, (semi-rigid) w/telescoping attachment handle (set of 3) | 1 | |
| 206L-610 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| 207-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 207-155 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 208-110 | PROP TIE-DOWN, McCauley 3 blade | 1 | |
| 208-111 | PROP TIE-DOWN, Hartzell 3 blade | 1 | |
| 208-120 | PROP TIE-DOWN, Hartzell 4 blade (set of 2) | 1 | |
| 208-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 208-160 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 208-170 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| 208-175 | INSULATED PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| 208064 | Mitutoyo 208064 Spindle attachment tip, Blade | 1 | |
| 2080M81P01 | HPT BLADE -7B | 1 | |
| 2080M87P04 | SUITABLE FOR HIGH VORTEX FIRST-CLASS BLADES ON CFM | 1 | |
| 209-200 | BLADE COVERS (set of 2) | 1 | |
| 209-210 | BLADE COVERS (COLD WEATHER TYPE) (set of 2) | 1 | |
| 209-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| 210-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 210-121 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 210-122 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| 210-123 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| 2100M96P04 | HPT BLADE -7B | 1 | |
| 21116A0 | Blade Lifter | 2 | |
| 21116A1 | Blade Lifter | 3 | |
| 212-015-501-005 | BLADE ASSY | 1 | |
| 212-015-501-115 | BLADE ASSY | 1 | |
| 212-015-501-119 | BLADE ASSY | 1 | |
| 212-015-501-121 | BLADE ASSY | 1 | |
| 212-400 | BLADE COVERS (set of 2) | 1 | |
| 212-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 2) | 1 | |
| 212-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| 212-675 | TAIL ROTOR BLADE TIE-DOWN | 1 | |
| 214-200 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| 214-400 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| 214-405 | BLADE COVERS (set of 2) | 1 | |
| 214-410 | BLADE COVERS (cold weather type) (set of 2) | 1 | |
| 214ST-400 | BLADE COVERS (set of 2) | 1 | |
| 214ST-410 | BLADE COVERS (cold weather type) (set of 2) | 1 | |
| 214ST-411 | BLADE COVERS (cold weather, hail protection type) (set of 2) | 1 | |
| 214ST-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| 214ST-675 | TAIL ROTOR BLADE TIE-DOWN | 1 | |
| 217-074568 | 5/16" 2 SLOT BROACHING TOOL WITH COATED BLADES | 1 | |
| 217-074569 | 3/8" 2 SLOT BROACHING TOOL WITH COATED BLADES | 1 | |
| 217-074572 | 7/16" 4 SLOT BROACHING TOOL WITH COATED BLADES | 1 | |
| 217-074801 | 5/16" 2 SLOT BROACHING TOOL WITH COATED BLADES | 1 | |
| 217-074802 | 3/8" 2 SLOT BROACHING TOOL WITH COATED BLADES | 1 | |
| 21C110G01 | BLADE REMOVAL KIT | 1 | |
| 21C11423G01 | ASSEMBLY STAGE 1 FAN BLADES | 1 | |
| 21C3110-014 | ROTOR BLADE GAGE | 1 | |
| 21C3110-016 | ROTOR BLADE GAGE | 1 | |
| 21C3110-018 | ROTOR BLADE GAGE | 1 | |
| 21C3110-020 | ROTOR BLADE GAGE | 1 | |
| 21C3110-022 | ROTOR BLADE GAGE | 1 | |
| 21C3110-024 | ROTOR BLADE GAGE | 1 | |
| 21C3110-026 | ROTOR BLADE GAGE | 1 | |
| 21C3110-090 | ROTOR BLADE GAGE | 1 | |
| 21C6110G01 | BLADE REMOVAL | 1 | |
| 21C7206G01 | COMPRESSOR ROTOR BLADE TIPS GRINDING FIXTURE (NO ESTÁ EN EL MANUAL) | 1 | |
| 21C7397G02 | SPECIAL TOOL - BLADE, EXTENSION | 2 | |
| 21C7398G02 | SPECIAL TOOL - FIXTURE, EXTENSION - STG2 BLADE | 2 | |
| 21C7411G01 | STAND, HOLDING, BLADE | 1 | |
| 21C7419G01 | GUIDE, BLADE | 1 | |
| 21C7419G02 | GUIDE, BLADE | 2 | |
| 21C7478G01 | SET DRESSER, LEADING EDGE, STAGE 1 BLADE--DISKDISK | 2 | |
| 21C7785P01 | COMPRESSOR BLADE-DISK LEADING EDGE GAGE SET | 2 | |
| 21C7830G01 | FIXTURE, ASSY BLADES | 1 | |
| 21C7830G01 | FIXTURE ASSY BLADE,DAMPENERS | 1 | |
| 21C8138G01 | FIXTURE STAGE 1 FAN BLADE | 1 | |
| 21C8983P01 | FAN AND COMPRESSOR BLADES MARKING | 1 | |
| 22126CE040038 | BOLTS FOR MAIN ROTOR BLADES | 1 | |
| 2225M27P02 | FAN BLADE | 1 | |
| 222A-405 | BLADE COVERS (set of 2) | 1 | |
| 222A-415 | BLADE COVERS (COLD WEATHER TYPE) (set of 2) | 1 | |
| 222A-501 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| 222B-400 | BLADE COVERS (set of 2) | 1 | |
| 222B-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 2) | 1 | |
| 222B-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| 2253PT | 2.5 BLADE ROTOR | 1 | |
| 230-310 | BLADE COVERS (set of 2) | 1 | |
| 230-320 | BLADE COVERS (COLD WEATHER TYPE) (set of 2) | 1 | |
| 230-405 | BLADE TIE-DOWNS, (semi-rigid) w/telescoping attachment handle (set of 3) | 1 | |
| 25917 | SAW BLADE DOOR | 1 | |
| 239601 | SAW, HAND;12" C/W BLADE | 1 | |
| 2671417 | BLADE,BAND SAW,WOODCUTTING;1/2" 10TPI | 1 | |
| 23002242 | GAGE, IND. 1ST STG BLADE TIP SHAKE | 1 | |
| 23002243 | GAGE, IND. 2ND STG BLADE TIP SHAKE | 1 | |
| 23038050 | MASK--GLASS BEAD PEEN, COMPRESSOR FIRST-STAGE WHEEL MASKS THE FRONT AND REAR OF THE COMPRESSOR FIRST- STAGE WHEEL WHILE PEENING THE BLADES. | 1 | |
| 23054788 | Puller / Pusher Blade Track 1st Stage LPT Rotor | 1 | |
| 23054790 | Puller / Pusher, Blade Track 3rd Stage, LPT Rotor | 1 | |
| 23054823 | Fixture – Grinding, Turbine Cased Blade Track | 1 | |
| 23054848 | Fixture – Grinding, Offset Gas Generator Blade track Grinding | 1 | |
| 23055747 | Box – Storage, Weighed 1st Stage Turbine Blades | 1 | |
| 23055748 | Box – Storage, Weighed 2nd Stage Turbine Blades | 1 | |
| 23055761 | FIXTURE, GRID, 3RD STAGE WHEEL AND BLADE | 1 | |
| 23055778 | Fixture – Grind 2nd Stage Turbine Wheel and Blade | 1 | |
| 23055779 | Fixture – Grind, !st Stage Turbine Wheel & Blade | 1 | |
| 23060619 | Gage - 2nd Stage Gas Generator Blade Tracks | 1 | |
| 23060626 | Spreader – Assembly, 1st Stage Blade Track | 1 | |
| 23060764 | Gage - 1st Stage NP Ceramic Blade Tracks | 1 | |
| 23060766 | Gage – Low Pressure Turbine 1st Stage Blade Track | 1 | |
| 23060767 | Gage – LP Turbine 2nd Stage Blade Tracks | 1 | |
| 23060768 | Gage – LP Turbine 3rd Stage Blade Tracks | 1 | |
| 23068505 | Fixture – Grind, LP Turbine 2nd Stage Wheel and Blade | 1 | |
| 23070332 | BLADE TRACK ( ESPEC. DMT) ( SUBSTITUI REF.173000,17 | 1 | |
| 23071574-106 | BLADE TRACK, 1ST STAGE HPT (ESPEC. DMT) | 1 | |
| 23071574-107 | BLADE TRACK, 1ST STAGE HPT (ESPEC. DMT) | 1 | |
| 23071574-109 | BLADE TRACK, 1ST STAGE HPT (ESPEC. DMT) | 1 | |
| 23071574-111 | BLADE TRACK, 1ST STAGE HPT (ESPEC. DMT) | 1 | |
| 23071574-113 | BLADE TRACK, 1ST STAGE HPT (ESPEC. DMT) | 1 | |
| 23071574-125 | BLADE TRACK, 1ST STAGE HPT | 1 | |
| 23071574-126 | TURBINE STAGE 1 BLADE TRACK | 1 | |
| 23094396 | T4 BLADED WHEEL GRIND FIXTURE | 1 | |
| 2315M20-3 | BLADE ASSY-WIPER WINDSHIELD | 1 | |
| 2315M7-3 | BLADE WIPER | 1 | |
| 2315M9-3 | WIPER BLADE | 1 | |
| 231920A0K0 | HP BLADE | 1 | |
| 235640A6N0 | HP BLADE | 1 | |
| 2364A65 | SQUARE WITH GRADUATIONS ON BOTH BLADES | 1 | |
| 24-2700-00 | HOISTING SLING M/R BLADE | 1 | |
| 247C5039 | GAGE, LENGTH-BLADE HPTR STG 1-2 | 1 | |
| 2531M86P01 | LOCKING BLADE | 1 | |
| 2531M88P01 | LOCKING BLADE | 1 | |
| 262037300 | TITAN BLADES – DEEP HOOKED | 1 | |
| 262110000 | CARPET CUTER BLADE | 1 | |
| 262610001 | REFILL BLADES (SIZE 1) | 1 | |
| 262610003 | REFILL BLADES (SIZE 3) | 1 | |
| 262610004 | REFILL BLADES (SIZE 4) | 1 | |
| 262636110 | REFILL BLADES MOZART (5 UNITS) | 1 | |
| 2319400050 | BLADE,HP TURBINE | 1 | |
| 263-5074 | FEELER GAUGE25 BLADES(.0015"-.035") | 1 | |
| 269A9210 | Sleeve - Main Rotor Blade Damper | 1 | |
| 269A9223 | Wrench - 269A1249 Cover Blade | 1 | |
| 269A9273 | Tracking Flag, Main Rotor Blades | 1 | |
| 269A9274 | Loop, Main Rotor Blade Tip Pull | 1 | |
| 269A9285 | Glove, Main Rotor Blade Tie Down | 1 | |
| 269A9288 | Tie Down Assembly - Main Rotor Blade | 1 | |
| 269A9290 | Wrench - Blade Damper | 1 | |
| 269T9332 | TAB BENDING TOOL,M/R BLADE | 1 | |
| 269T9332-1 | TAB BENDING TOOL,M/R BLADE | 1 | |
| 2783292-1 | COVER - PROTECTIVE, RAT TURBINE BLADE | 3 | |
| 280FX-400 | BLADE COVERS (set of 3) | 1 | |
| 280FX-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| 280FX-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| 281-9156 | PACK OF 10 SPARE JUNIOR HACKSAW BLADES | 1 | |
| 2858A44 | HOT-BLADE KNIFE | 1 | |
| 293342-1 | BLADE FREQUENCY TEST | 1 | |
| 294125-1 | BLADE LOADING GAGE | 1 | |
| 294926-1 | TURBINE BLADE RETAINER | 1 | |
| 294945-1 | BLADE EROSION GAGE | 1 | |
| 296702-1 | FIXTURE, BLADE PUSH TEST | 1 | |
| 296863-1 | BLADE EROSION GAGE | 1 | |
| 298125-1 | LPT Blades Loading Kit | 1 | |
| 2A8901 | HPT BLADE | 1 | |
| 2C14198 | TOOL REMOVAL-RETAINER, COMP. ROTOR, BLADE | 1 | |
| 2C14198 REV D | TOOL REMOVAL-RETAINER, COMP. ROTOR, BLADE | 1 | |
| 2C14198G01 | TOOL REMOVAL - RETAINER, STAGE 1 BLADE | 1 | |
| 2C14198G02 | REMOVAL TOOL, HPC STAGE 1 BLADE RETAINER, SET | 3 | |
| 2C14225G01 | Fan Blade Insp. Blending | 1 | |
| 2C14630G02 | FIXTURE,PRELOAD-STAGE 1 FAN BLADE SPAC | 1 | |
| 2C14678G01 | TOOL SET, REMOVAL ‐ RETAINER, LPTR BLADE | 1 | |
| 2C14678G02 | TOOL SET, STRAIGHTENING&REMOVAL, BLADE RETAINERS-LPT ROTOR | 2 | |
| 2C14699G02 | PREBEND TOOL, HPC STAGE 1 BLADE RETAINER, SET | 1 | |
| 2C14728G01 | Fan Blade Insp. Blending | 5 | |
| 2C14777G01 | GAGE, INSPECT – HPT1 BLADE T/E | 1 | |
| 2C14796G01 | STAGE 1 HPT BLADE L. | 2 | |
| 2C14796G02 | GAUGE BLADE LENGTH | 2 | |
| 2C14805G01 | HPT BLADE INSP FIXTR | 2 | |
| 2C14822G03 | GAGE SET, INSTALLED-LPT BLADE RETAINERS (GAGE) | 1 | |
| 2C14836G01 | FIXTURE, INSTALL/REMOVE - STAGE 2 AFT BLADE RETAINER (INSTALL/REMOVE FIXTURE) | 1 | |
| 2C14836G02 | FIXTURE, INSTALL/REMOVE - STAGE 2 AFT BLADE RETAINER (INSTALL/REMOVE FIXTURE) | 1 | |
| 2C14839G01 | TOOL, INSTALL/REMOVE - RETAINING RING, AFT BLADE RETAINER (PLIERS) | 1 | |
| 2C14867P01TK | HPC Blades TE Thickness Gage | 1 | |
| 2C14900G01 | ADAPTER BALANCE STG 2 COMPRESSOR DRIVE AND BLADES | 1 | |
| 2C14901G01 | ADAPTER BALANCE STG 1 COMPRESSOR DISK AND BLADES | 1 | |
| 2C14928G02 | SHROUD, BAL ‐FAN ROTOR WITHOUT STG 1 BLADES | 1 | |
| 2C14929G01 | DOLLY, INSTALLATION ‐ FAN ROTOR/BALANCE ARBOR WITHOUT STG 1 BLADES | 1 | |
| 2C15629 | INSPECTION FIXTURE, FAN BLADES STAGE 1 | 1 | |
| 2C18012 | FIXTURE, PRELOAD - SPACER, STAGE 1 FAN BLADE | 2 | |
| 2C18012602 | FAN BLADE REM TOOL | 1 | |
| 2C18012G01 | FAN BLADE RML/INST'L | 2 | |
| 2C18012G02 | FAN BLADE REM. TOOL | 6 | |
| 2C18012GO2 | FIXTURE, PRELOAD - SPACER, STAGE 1 FAN BLADE | 6 | |
| 2C5087P01 | PROTECTOR, FAN BLADE TIPS | 1 | |
| 2C5614P01 | SCALE - BLADES LPT | 1 | |
| 2C5631G01 | SET, REMOVAL, SETSCREW BLADE LOCKING COMPRESSOR ROTOR | 1 | |
| 2C5650G01 | ADAPTER - HPT BLADE | 1 | |
| 2C5651P01 | INSERT - HPT BLADE | 1 | |
| 2C5720G01 | FIXTURE - FAN BLADES | 1 | |
| 2C5721G01 | FIXTURE - FAN BLADES | 1 | |
| 2C5889 | (RT) HPC/HPT BLADE TIPS GRND FXT | 1 | |
| 2C5889G01 | FIXTURE - GRIND BLADE TIP HPT | 1 | |
| 2C5889G02 | FIXTURE BLADE TIP GRINDER | 1 | |
| 2C6119 | SHIM SET, BLADE TIPS-COMPRESSOR ROTOR | 1 | |
| 2C6119G02 | SHIM SET, BLADE TIPS - COMPRESSOR ROTOR | 1 | |
| 2C6177 | POSITIONER - BLADE, COMPRESSOR ROTOR | 1 | |
| 2C6177G01 | POSITIONER-BLADE,COMPRESSOR RO | 1 | |
| 2C6177G02 | POSITIONER, COMPRESSOR ROTOR BLADES | 1 | |
| 2C6269 | FIXTURE INSTALL REMOVE-SPACER STAGE 1 FAN BLADE | 1 | |
| 2C6333 | SCALE,SOURCE-MOMENT WEIGHT BLADES | 1 | |
| 2C6367 | GUIDE OF UNIQUE FAN BLADE INST. SPINNER | 2 | |
| 2C6367G01 | GUIDE OF UNIQUE FAN BLADE INST. SPINNER | 10 | |
| 2C6510 | SNUBBER SET, BLADES-COMPRESSOR | 1 | |
| 2C6510G01 | SNUBBER SET, BLADES-COMPRESSOR | 1 | |
| 2C6564G01TK | Water Flow Check (HPT Blade)-CF6-80A3 | 1 | |
| 2C6598 | TOOL, TWISTING-C/R BLADE | 1 | |
| 2C6598G01 | TOOL, TWISTING-C/R BLADE | 1 | |
| 2C6599G01 | TOOL PREBEND - COMPRESSOR ROTOR BLADE RETAINER, STAGE 1 | 3 | |
| 2C6600 | TOOL SEATING - RETAINER COMPR. RTR BLADE STG.1 | 1 | |
| 2C6600 REV J | TOOL SEATING - RETAINER COMPR. RTR BLADE STG.I | 1 | |
| 2C6600G02 | TOOL SEAT - COMPRESSOR ROTOR BLADE RETAINER, STAGE 1 | 1 | |
| 2C6600G03 | SEATING TOOL, HPC STAGE 1 BLADE RETAINE, SET | 4 | |
| 2C6600G04 | TOOL SEAT - COMPRESSOR ROTOR BLADE RETAINER, STAGE 1 | 1 | |
| 2C6601 | TOOL,STAGE 1 C/R BLADE | 1 | |
| 2C6604 | TOOL,UNBEND-C/R BLADE RETAINER | 1 | |
| 2C6604G01 | TOOL,UNBEND-C/R BLADE RETAINER | 1 | |
| 2C6663G01 | FIXTURE, HOLD-HPC BLADES STG11-16 | 1 | |
| 2C6861 | TOOL SET, INSP. & GRINDING LP TURB. ROTOR BLADES | 1 | |
| 2C6861 REV B | TOOL SET, INSP. & GRINDING LP TURB. ROTOR BLADES | 1 | |
| 2C686I | TOOL SET, INSP. & GRINDING LP TURB. ROTOR BLADES | 1 | |
| 2C6870 | FIXTURE HLDG STG 1 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6870 REV A | FIXTURE, HOLDING STG. I LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6871 | FIXTURE HLDG STG 2 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6871 REV A | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6872 | FIXTURE HLDG STG 3 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6872 REV A | FIXTURE, HOLDING STG. 3 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6872G01A2B | Tool Set, Inspection and Grinding, LPTR Blades | 1 | |
| 2C6873 | FIXTURE HLDG STG 4 LOW PRESS TURB BLADE FMF 2C6861 | 1 | |
| 2C6873 REV A | FIXTURE, HOLDING STG. 4 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6879 | TEMPLATE,LEADING EDGE-FAN BLADE STAGE 1 | 1 | |
| 2C6879P01 | Stg. 1 Fan Blade LE Template (80A3/80C2) | 4 | |
| 2C687I | FIXTURE, HOLDING STG. 2 LOW PRESS. TURB. BLADE FMF 2C686I | 1 | |
| 2C6894G04 | Fan Blade Spinner Removal Tool | 11 | |
| 2C6894G04-01 | TIP BLADE REMOVAL | 1 | |
| 2C6920P01 | FANBLADE TOOL | 6 | |
| 2C6933G01 | TEMPLATE, BLEND-FAN BLADE STG. 1 | 1 | |
| 2C6950 | SPACER ADJUSTABLE STABLE ONE FAN BLADE | 1 | |
| 2C6967 | TOOL, INSTL.-STG. 2 COMP. RTR BLADE RET SHOP | 1 | |
| 2C6967 REV G | TOOL, INSTL.-STG. 2 COMP. RTR BLADE RET SHOP | 1 | |
| 2C6967G05 | TOOL INSTALLATION - COMPRESSOR ROTOR BLADE RETAINER, STAGE 2 | 1 | |
| 2C6967G06 | INSTALL. COMPRESSOR ROTOR BLADE RETAINER STOP | 2 | |
| 2C6967G07 | TOOL INSTALLATION - COMPRESSOR ROTOR BLADE RETAINE | 1 | |
| 2C6967G08 | TOOL, INSTALLATION ‐ HPCR STAGE 2 BLADE, RETAINER | 1 | |
| 2C6968 | TOOL REMOVAL - STAGE 2 BLADE RETAINER STOP | 1 | |
| 2C6968 REV E | TOOL REMOVAL - STAGE 2 BLADE RETAINER STOP | 1 | |
| 2C6968G01 | TOOL REMOVAL - BLADE RETAINER STOP, STAGE 2 | 1 | |
| 2C6968G02 | TOOL, REMOVAL, S-2, HPC BLADE RETAINER LOCK PIN | 1 | |
| 2C6968G03 | TOOL REMOVAL - BLADE RETAINER STOP, STAGE 2 | 1 | |
| 2C6968G04 | TOOL, REMOVAL - HPCR, STAGE 2 BLADE RETAINER | 1 | |
| 2C6I77 | POSITIONER - BLADE, COMPRESSOR ROTOR | 1 | |
| 2C7376G01/G03TK | Stg.1 & 2 HPT Blade Water Flow Check Fixture (CF6-80A3 / C2) | 1 | |
| 2C7376G03 | HPT BLADE WATERFLW F | 1 | |
| 2C7399 | FIXTURE, HOLDING - FAN BLADE STG. 1 | 1 | |
| 2C7399 REV C | FIXTURE, HOLDING - FAN BLADE STG. I | 1 | |
| 2C7497G01 | Tool Set, LPT Blade, Z Surfaces | 1 | |
| 2C7546G11 | FIXTURE - FAN BLADE LEADING EDGE, 60 HZ | 1 | |
| 2C7546G12 | FIXTURE - FAN BLADE LEADING EDGE, 50 HZ | 1 | |
| 2C7549 | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 2C7549 REV U | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 2C7549G03 | Comp. Blade Length Gage (CF6-80A3) | 1 | |
| 2C7549G06 | LENGTH GAGE STG 1 BLADES | 1 | |
| 2C7734P01 | CONTOUR MASTER - STAGE ONE FAN ROTOR BLADE LEADING EDGE | 1 | |
| 2C8042 | TOOL SET, WEDGING COMPR ROTOR BLADES | 1 | |
| 2C8047 | INSTALLATION-STAG1 FAN BLADE RETAINER | 1 | |
| 2C8047G01 | FAN BLADE TOOL | 4 | |
| 2C8072 | FIXTURE, PRELOAD-SPACER STAGE 1 FAN BLADE 1 | 1 | |
| 2C8073 | FIXTURE,PRELOAD-SPACER STAGE 1 FAN BLADE | 2 | |
| 2C8073 REV G | FIXTURE, PRELOAD SPACER STG. I FAN BLADE | 1 | |
| 2C8073G01 | FAN BLADE REMOVAL TOOL & KIT | 2 | |
| 2C8073G01TK | FIXTURE, PRELAND-SPACER STG.1 FAN BLADE | 1 | |
| 2C8073G02 | FAN BLADE REMOVAL TOOL | 1 | |
| 2C8073G03 | FAN BLADE REMOVAL TOOL | 1 | |
| 2C8073G04 | TOOL INST FAN BLADE RET | 8 | |
| 2C8073G05 | FAN BLADE TOOL 80A & | 14 | |
| 2C8073P23 | YOKE BLADE | 1 | |
| 2C81083 | PROGRAM - FAN BLADE PIN HOLE EVALUATION | 1 | |
| 2C81083P01 | Program Evaluation − Fan Blade Pin Hole | 1 | |
| 2C81083P06 | Program Evaluation − Fan Blade Pin Hole | 1 | |
| 2C81109 | FAN BLADE PIN PULLER | 1 | |
| 2C81109G01 | PULLER ASSY - PIN FAN BLADE | 3 | |
| 2C81210 | SET, RM. BLADE HPC | 1 | |
| 2C81210G01 | SET, REMOVAL - BLADE LOCK | 2 | |
| 2C81425G01 | PROTECTIVE COVER, HPT STAGE 1 BLADED | 1 | |
| 2C81426G01 | PROTECTIVE COVER, HPT STAGE 2 BLADED | 1 | |
| 2C81516G01 | FIXTURE,BLADE KEY BENT | 1 | |
| 2C81517 | BENDER, BLADE KEY (BLADE KEY B | 1 | |
| 2C81517P03 | BENDER, BLADE KEY (BLADE KEY B | 1 | |
| 2C81540G02 | UNIT, HYDRAULIC, BLADE KEY BEN | 1 | |
| 2C81552P01 | BASE, LPT BLADE RETAINER (BLAD | 1 | |
| 2C81575G02 | FIXTURE, REMOVAL, BLADE RETAIN | 1 | |
| 2C847 | TOOL INSTALATION-STAGE 1 FAN BLADE RETAIN | 1 | |
| 2C91059G01 | TOOL - LPT BLADE RETAINER REMOVAL | 1 | |
| 2C91069 | GAGE, FAN BLADE LEADING EDGE INSPECTION | 1 | |
| 2C91069G01 | GAUGE FAN BLADE LEADING EDGE | 1 | |
| 2C91119G01 | FIXTURE-AIR FLOW STG. 1 BLADES | 1 | |
| 2C91197G01 | CONTAINER-STORAGE-BLADES | 1 | |
| 2C91198G01 | CONTAINER-STORAGE-BLADES | 1 | |
| 2C91199G01 | CONTAINER-STORAGE-BLADES | 1 | |
| 2C91200P01 | CONTAINER-STORAGE-BLADES | 1 | |
| 2C91201P01 | CONTAINER-STORAGE-BLADES | 1 | |
| 2C91202P01 | CONTAINER-STORAGE-BLADES | 1 | |
| 2C91249G01 | SCALE - FAN BLADES | 1 | |
| 2C91251P01 | RETAINER - FAN ROTOR BLADE | 1 | |
| 2C91306P01 | EXTENDER, HPT 1 BLADE | 2 | |
| 2C91307P01 | EXTENDER, HPT 2 BLADE | 2 | |
| 2C91395G01 | GAGE, COMPRESSOR BLADE DOVETAIL INSPECTION | 1 | |
| 2M14166 | GAGE, INSPECTION - LPT, BLADE STAGE 3 | 1 | |
| 2M14167 | GAGE, INSP - LPT BLADE STG 4 | 1 | |
| 2ME140W9255 | GAGE, INSPECTION - LPT, BLADE STAGE 3 | 2 | |
| 2R1120 | FIXTURE, DOVETAIL MACHIN. STAGE 1 ROTOR FAN BLADE | 1 | |
| 2R1134 | FIXTURE, GRINDING DATUM 'P' - LPT BLADE STG 4 | 1 | |
| 2R19316 | PROBE: TWIN BNC V2500 BLADE ROOT INS KIT | 1 | |
| 2RII20 | FIXTURE, DOVETAIL MACHIN. STAGE I ROTOR FAN BLADE | 1 | |
| 3-331-14-1-0 | 1/2ROUND PANSAR BLADE | 2 | |
| 30-112 | HSS SAW BLADE | 1 | |
| 30-803-0302 | Sylvac 30-803-0302 S-Mike Pro Digital Blade Micrometer Range 0-25mm | 1 | |
| 30-820-1700 | Sylvac Digital Protractor with 200mm Blade | 1 | |
| 30-820-2420 | Sylvac Replacement Protractor Blade, 200mm | 1 | |
| 30-820-2430 | Sylvac Replacement Protractor Blade, 300mm | 1 | |
| 30-820-2450 | Sylvac Replacement Protractor Blade, 500mm | 1 | |
| 30-903-0602 | Sylvac 30-903-0602 S-Mike Pro Digital Blade Micrometer Range 25-60mm | 1 | |
| 30-903-1002 | Sylvac 30-903-1002 S-Mike Pro Digital Blade Micrometer Range 60-95mm | 1 | |
| 30-903-1302 | Sylvac 30-903-1302 S-Mike Pro Digital Blade Micrometer Range 95-130mm | 1 | |
| 30-903-1602 | Sylvac 30-903-1602 S-Mike Pro Digital Blade Micrometer Range 120-155mm | 1 | |
| 300-310 | ROTOR HUB COVER, folding blades | 1 | |
| 300-400 | BLADE COVERS (set of 3) | 1 | |
| 300-405 | BLADE COVERS, hail protection type (set of 3) | 1 | |
| 300-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| 300-415 | BLADE COVERS (COLD WEATHER TYPE), hail protection type (set of 3) | 1 | |
| 300-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| 300-501 | REAR BLADE TIE-DOWN | 1 | |
| 303-110 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 303-111 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 303-115 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 3055831-02 | BLADE COMPRESSOR | 1 | |
| 3071132-01 | BLADE COMPRESSOR | 1 | |
| 30R0122G01 | INSPECTION KIT, EDDY CURRENT, HPC BLADES 1-3, F414 | 1 | |
| 30R0203 | MASTER BLADE | 1 | |
| 30R0204 | FAN BLADE MOMENT WEIGHT | 1 | |
| 310-120 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| 310-121 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 310-122 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| 310-123 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 316-2 | PEN REAMER DE-BURRING TOOL KIFE WITH REPLACEABLE BLADE | 1 | |
| 320-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 320-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 330-400 | BLADE COVERS, STANDARD TYPE (set of 3) | 1 | |
| 330-410 | BLADE COVERS, COLD WEATHER TYPE (set of 3) | 1 | |
| 330-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| 330A91-1120-03 | SLING MAIN ROTOR BLADE | 1 | |
| 330A91112003 | SLING MAIN ROTOR BLADE | 1 | |
| 330A91330203 | SLING MAIN ROTOR BLADE | 1 | |
| 330A92-1210-00 | DEVICE,REAR BLADE LOCKING | 1 | |
| 330A93-1008-00 | BLADE PIN WRENCH | 1 | |
| 330A93-2060-00 | MOUNT,COMPOSITE BLADE SLEEVE | 1 | |
| 330A93100800 | BLADE PIN SPANNER | 1 | |
| 330A94-2009-00 | MOUNT,CLINOMETER COMPOSITE BLADE | 1 | |
| 330A96-1100-00 | MAIN ROTOR BLADE SUPPORT | 1 | |
| 332A91-1190-00 | SLING MAIN ROTOR BLADE | 1 | |
| 332A91-1190-01 | SLING, MAIN ROTOR BLADE | 1 | |
| 332A91-3191-00 | SLING, MAIN ROTOR HEAD 5 BLADE | 1 | |
| 332A91-3191-01 | SLING MRH 5 BLADE | 1 | |
| 332A91-6210-00 | MAIN BLADE FITTING | 1 | |
| 332A91119000 | SLING MAIN ROTOR BLADE | 1 | |
| 332A91319100 | SLING, MAIN ROTOR HEAD, 5 BLADE | 1 | |
| 332A91319101-OTA | MAIN ROTOR HUB/5 BLADES HOISTING DEVICE | 1 | |
| 332A91‐1190‐01 | SLING,MAIN ROTOR BLADE | 1 | |
| 332A91‐1191‐00 | BOX1, MAIN BLADE | 1 | |
| 332A91‐1192‐00 | BOX, 2 MAIN BLADE | 1 | |
| 332A92114700 | PIN BLADE EXTRACTOR | 1 | |
| 332A92127100 | TAIL BLADES COVER | 1 | |
| 332A92142600 | EXTRACTOR BLADE PIN | 1 | |
| 332A93-3380-00 | TAIL ROTOR BLADE MAIN TOOL | 1 | |
| 332A95-5202-00 | SLING, MAIN ROTOR BLADE | 1 | |
| 332A96-1181-00 | CONTAINER FOR 2 BLADES | 1 | |
| 332А91-1190-01 | SLING FOR DISMANTLING THE BLADE OF THE LOAD-BEARING SCREW | 1 | |
| 332А91‐1190‐01 | SLING, MAIN ROTOR BLADE | 1 | |
| 332А93-3380-00 | EXTRACTOR FOR DISMANTLING THE PIN OF THE TAIL ROTOR BLADE | 1 | |
| 336-300 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| 336-305 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| 337-000-114-0 | FAN BLADE ROTOR STG1 | 1 | |
| 337-150 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| 337-160 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| 337-170 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 337-175 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 337-177-001 | FAN BLADE PAIR SET ROTOR STG1 | 1 | |
| 338-002-114-0 | ENGINE FAN BLADE | 1 | |
| 340-001-038-0 | FAN BLADES | 1 | |
| 340-001-817-0 | BLADE PLATFORM SET (24EA) | 1 | |
| 340-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 340-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 341A91-1100-00 | MAIN BLADE SHIPMENT CONTAINER | 1 | |
| 341A93-L 105-30 | GUIDE PIN MAIN BLADE | 1 | |
| 350A11-0010-07 | BLADE,MAIN ROTOR | 1 | |
| 350A91120001 | BOX,REAR BLADE | 1 | |
| 350A92-1200-00 | TAIL ROTOR BLADE MOORING | 1 | |
| 350A93-1280-00 | TOOL TO REPLACE THE BUSH IN THE TAIL ROTOR BLADE. | 2 | |
| 350A93-1280-00/PHP | TOOL,REPLACEMENT BUSH OF REAR BLADE | 1 | |
| 350A93128000 | TOOL,REPLACEMENT BUSH OF REAR BLADE | 2 | |
| 350A94-1130-01 | MAIN ROTOR BLADE TRIM TAB TOOLS | 1 | |
| 350A94-2708-00 | TRH Blade Immobilizing Tool | 1 | |
| 350A94-2708-01 | TAIL ROTOR BLADE LOCKING TOOL | 1 | |
| 35435A68 | X-ACTO KNIFE BLADE - PACK OF 100 EACH | 1 | |
| 355A91-1140-01 | BOX 3. BLADES AIR TRANSPORT | 1 | |
| 355A91-1150-00 | MAIN ROTOR BLADE SLING | 1 | |
| 355A91-1150-01 | SLING MAIN BLADE | 1 | |
| 355A91114001 | BOX.3.BLADES.AIR.TRANSPORT | 1 | |
| 355A91115001 | SLING,BLADES MAIN | 1 | |
| 355A96116000 | BOX, "B2R", 1 MAIN BLADE | 1 | |
| 355А91-1150-00 | SLING FOR LIFTING BLADES | 1 | |
| 3604 | CRANKSHAFT BLADE AND DAMPENER BUSHING REMOVERS REPLACERS FOR 3/4 ID BUSHING | 1 | |
| 3607 | CRANKSHAFT BLADE AND DAMPENER BUSHING REMOVERS REPLACERS FOR 15/32 ID BUSHING | 1 | |
| 35730 | SCRAPER 25 X 200 MM WITH FLEXIBLE BLADE NON SPARKING Cu-Be | 1 | |
| 35732 | SCRAPER 30 X 200 MM WITH FLEXIBLE BLADE NON SPARKING Cu-Be | 1 | |
| 35734 | SCRAPER 40 X 200 MM WITH FLEXIBLE BLADE NON SPARKING Cu-Be | 1 | |
| 35736 | SCRAPER 50 X 200 MM WITH FLEXIBLE BLADE NON SPARKING Cu-Be | 1 | |
| 35738 | SCRAPER 60 X 200 MM WITH FLEXIBLE BLADE NON SPARKING Cu-Be | 1 | |
| 35740 | SCRAPER 75 X 200 MM WITH FLEXIBLE BLADE NON SPARKING Cu-Be | 1 | |
| 35742 | SCRAPER 80 X 200 MM WITH FLEXIBLE BLADE NON SPARKING Cu-Be | 1 | |
| 35744 | SCRAPER 100 x 200 WITH FLEXIBLE BLADE NON SPARKING Cu-Be | 1 | |
| 36046 | SCRAPER 25 X 200 MM WITH FLEXIBLE BLADE AND WOODEN HANDLE NON SPARKING Cu-Be | 1 | |
| 36048 | SCRAPER 30 X 200 MM WITH FLEXIBLE BLADE AND WOODEN HANDLE NON SPARKING Cu-Be | 1 | |
| 36050 | SCRAPER 40 X 200 MM WITH FLEXIBLE BLADE AND WOODEN HANDLE NON SPARKING Cu-Be | 1 | |
| 36052 | SCRAPER 50 X 200 MM WITH FLEXIBLE BLADE AND WOODEN HANDLE NON SPARKING Cu-Be | 1 | |
| 36054 | SCRAPER 60 X 200 MM WITH FLEXIBLE BLADE AND WOODEN HANDLE NON SPARKING Cu-Be | 1 | |
| 36056 | SCRAPER 75 X 200 MM WITH FLEXIBLE BLADE AND WOODEN HANDLE NON SPARKING Cu-Be | 1 | |
| 36058 | SCRAPER 80 X 200 MM WITH FLEXIBLE BLADE AND WOODEN HANDLE NON SPARKING Cu-Be | 1 | |
| 36060 | SCRAPER 100 X 200 MM WITH FLEXIBLE BLADE AND WOODEN HANDLE NON SPARKING Cu-Be | 1 | |
| 360A33104009 | TAIL ROTOR BLADE | 1 | |
| 360A93-3300-00 | BLADE BEAM MOUNTING TOOL | 1 | |
| 363-906-002-0 | FAN BLADE | 1 | |
| 364-906-002-0 | FAN BLADE | 1 | |
| 365A11-0050-10 | MAIN ROTOR BLADE | 1 | |
| 365A11005009 | MAIN ROTOR BLADE | 1 | |
| 365A1150310051 | BLADE TIP CAP, CONDITIONED, ASSY | 1 | |
| 365A12007000 | BLADE, TAIL ROTOR | 1 | |
| 365A91-1146-00 | MAIN ROTOR BLADE STAND | 1 | |
| 365A91-1147-00 | MAIN BLADES TROLLEY | 1 | |
| 365A91-1148-00 | MAIN ROTOR –BLADE CARD | 1 | |
| 365A91-1150-00 | MAIN ROTOR BLADE SLING SWL 50DAN | 1 | |
| 365A91-1150-01 | SLING, MAIN ROTOR BLADE | 1 | |
| 365A91-1182-00 | 5-BLADE AIR-TRANSPORT CRATE | 1 | |
| 365A91114700 | MAIN BLADES TROLLEY | 1 | |
| 365A91115001 | SLING MAIN ROTOR BLADE | 1 | |
| 365A92114009 | MAIN BLADES FOLDABLE DEVICE | 1 | |
| 365A96-1140-00 | MRB CONTAINER FOR 4BLADES (WOOD) | 1 | |
| 365A96-33836-20 | TAIL ROTOR BLADE COVER | 1 | |
| 365A96-3386-20 | TAIL ROTOR BLADE PROTECTION | 2 | |
| 365A96-3387-00 | UPGRADED TAIL ROTOR BLADE PACKAGING | 1 | |
| 369021100-80907 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 369D21100-809 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 369D21100-80907 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 369D29826 | 4 BLADE TAIL ROTOR NUT #369D21716-5 TORQUE WRENCH ADAPTER | 1 | |
| 369D29907 | TR RIGGING TOOL (4 BLADED) | 1 | |
| 369D29931 | TAIL ROTOR RIGGING TOOL (2 BLADED) | 1 | |
| 369D29942 | MAIN ROTOR BLADE TRACKING TOOL | 1 | |
| 37153 | FEELER GAUGE 13 BLADES (0,05 -1 MM ) L: 100 MM NON SPARKING BRASS | 1 | |
| 377-177-001 | BLADES SETS | 1 | |
| 3782G01 | Wrench I/R Fan Blade Ring | 1 | |
| 38185A15 | SCISSOR BLADE SHEARS | 1 | |
| 3851-13-0.5-R-24 | BAND SAW BLADES | 1 | |
| 3851-13-0.6-R-18 | BAND SAW BLADES | 1 | |
| 3851-13-0.9-R-14 | BAND SAW BLADES | 1 | |
| 3906-300-24-100 | SANDFLEX BI-METAL HAND HACKSAW BLADES | 2 | |
| 3C3754G04 | HPT AFT BLADE RETAINER R/I FIXTURE | 1 | |
| 3ED00499 | BLADE BASKET_[3ED00499] | 1 | |
| 3G1005G00633 | M/R BLADES TIE-DOWN (HD-02-00) | 1 | |
| 3G1005G00731 | TR BLADE FLAPPING BLOCK | 1 | |
| 3G1005G00732 | TOOL, T/R BLADES FLAPPING BLOCK (HD-03-00) | 1 | |
| 3G1005G01732 | TOOL, T/R BLADES FLAPPING BLOCK (HD-03-00) | 1 | |
| 3G200G00131 | SUPPORT RACK, MR AND TR BLADE | 1 | |
| 3G6005G01431 | SUPPORT DIAL GAUGE (BLADE SIDE) | 1 | |
| 3G6005G01831 | SUPPORT ASSY, DIAL GAUGE (T/R DAMPER BLADE SIDE) | 1 | |
| 3G6200G00131 | STAND, M/R AND T/R BLADES STORAGE | 1 | |
| 3G6200G07231 | TOOL, M/R BLADE LIFTING | 1 | |
| 3G62050G03451 | Blade Bolt Guide | 1 | |
| 3G6205G00131 | STAND, M/R AND T/R BLADES STORAGE (HE-09-00) | 1 | |
| 3G6205G00231 | TROLLY, M/R BLADE TRANSPORT | 1 | |
| 3G6205G00331 | MR Blade Retention Bolt Tool | 1 | |
| 3G6205G00632 | SLING, MAIN ROTOR BLADE LIFT | 1 | |
| 3G6205G03532 | MAIN ROTOR BLADE TRIM TAB TOOL | 1 | |
| 3G6205G03532-OTA | TOOL KIT, M/R BLADE TRIM TAB BENDING - METALICO | 1 | |
| 3G6205G0632 | SLING BLADE | 1 | |
| 3G6205G06332 | SLING, M/R BLADE HANDLING | 1 | |
| 3G6405G 12651 | T/R BLADE PROTECTION | 1 | |
| 3G6405G00231 | EXPANDER ASSY, T/R BLADE INSTL | 1 | |
| 3G6405G02131 | TOOL, T/R BLADE DAMPER ATTACH. BUSHING REM. | 1 | |
| 3G6405G0231 | EXPANDER ASSY, T/R BLADE INSTL | 1 | |
| 3G6405G12651 | T/R BLADE PROTECTION | 1 | |
| 3G6410A02451 | 3G641BLADE FLAP STOP UPPER | 1 | |
| 401-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 401-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 402-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 402-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 4026AS555-1 | HUB & BLADE STAND, POST EXTENSION | 1 | |
| 4026AS620-1 | HUB & BLADE REMOVAL TOOL | 1 | |
| 4036 | FAN BLADE | 7 | |
| 404-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 404-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 4059A58 | SAW BLADE LG 4" X D 3/4" X T 0.035 | 1 | |
| 4059A61 | SAW BLADE LG 6" X WD 3/4" X T 0.035 | 1 | |
| 4059A9 | SAW BLADE LG 12" X WD 3/4" X T 0.050 | 1 | |
| 407-015-001-111 | BLADE ASSY, MAIN ROTOR | 1 | |
| 407-103 | MAIN ROTOR MAST/DRIVE SHAFTS COVER (folding blades) | 1 | |
| 407-104 | MAIN ROTOR MAST/DRIVE SHAFTS COVER (Blades Removed) | 1 | |
| 407-300 | BLADE COVERS (set of 4) | 1 | |
| 407-301 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| 407-302 | BLADE TIE-DOWNS w/Telescoping Attachment Handle (set of 5) | 1 | |
| 407-310 | BLADE COVERS (cold weather type) (set of 4) | 1 | |
| 407-311 | BLADE COVERS (cold weather/hail protection type) (set of 4) | 1 | |
| 407-312 | BLADE COVERS w/Tie-Down Add-On Detail (set of 4) | 1 | |
| 407-313 | BLADE COVERS (cold weather type & Tie-Down Add-On) (set of 4) | 1 | |
| 407-420 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| 407-TR-F-02 | BLADE SURFACE TOOL | 1 | |
| 407BF-100-1 | B407 BLADE FOLD STC PROV. ONLY | 1 | |
| 407BF-900-1 | B407 BLADE FOLDING KIT | 1 | |
| 407BF-900-2 | BLADE FOLD KIT | 1 | |
| 407BF-900-3 | B407 BLADE FOLD SUPPORTS KIT ONLY | 1 | |
| 408-145 | PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| 408-146 | INSULATED PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| 4091AS0172-1 | FAN BLADE SPACER PULLER, T-HANDLE / MFC: 5C905 | 1 | |
| 41003-01 | SCRAPER BLADE 3/16X3/4X8 | 2 | |
| 41004-01 | SCRAPER BLADE 3/16X1X8 | 2 | |
| 411-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 411-131 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 4114T15P02 | FAN BLADE | 1 | |
| 412-400 | BLADE COVERS (set of 4) | 1 | |
| 412-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| 412-500 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| 412-502 | BLADE TIE-DOWNS, (semi rigid) w/telescoping attachment handle (set of 5) | 1 | |
| 412-675 | TAIL ROTOR BLADE TIE-DOWN | 1 | |
| 412-676 | TAIL ROTOR BLADE TIE-DOWN (pillow type) | 1 | |
| 414-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 414-131 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 414-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 414-136 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 4179A271 | ALUMINUM SAW BLADE | 1 | |
| 42-315 | DURABLE COMBINATION SQUARE WITH A STAINLESS STEEL BLADE FOR PRECISE MEASUREMENTS AND RIGHT ANGLES. | 1 | |
| 42-5160 | PROPELLOR/SPINNER COVERS, 4 BLADE (SET OF 2) | 2 | |
| 4200A45 | TITANIUM SAW BLADE | 1 | |
| 4202A12 | HACKSAW BLADES | 1 | |
| 421-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 421-131 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 421-132 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 421-133 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 422-330 | Mitutoyo 422-330 Digimatic Blade Micrometer 0-25mm / 0-1" | 1 | |
| 422-331 | Mitutoyo 422-331 Digimatic Blade Micrometer 25-50mm / 1-2" | 1 | |
| 422-332 | Mitutoyo 422-332 Digimatic Blade Micrometer 50-75mm / 2-3" | 1 | |
| 422-333 | Mitutoyo 422-333 Digimatic Blade Micrometer 75-100mm / 3-4" | 1 | |
| 425-150 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 425-155 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 425-160 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 2 | |
| 425-165 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 426526022Z | 1 ST STAGE BLADE LOCK | 1 | |
| 427-103 | MAIN ROTOR MAST/DRIVE SHAFTS COVER (Folding Blades) | 1 | |
| 427-300 | BLADE COVERS (set of 4) | 1 | |
| 427-301 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| 427-310 | BLADE COVERS (cold weather type) (set of 4) | 1 | |
| 427-311 | BLADE COVERS (cold weather/hail protection type) (set of 4) | 1 | |
| 427-312 | BLADE COVERS w/Tie-Down Add-On Detail (set of 4) | 1 | |
| 429-201-006-101 | RIG TOOL TTR BLADE PITCH ANGLE | 1 | |
| 429-300 | BLADE COVERS (set of 4) | 1 | |
| 429-305 | BLADE COVERS w/Tie-Down Add-On Detail (set of 4) | 1 | |
| 429-310 | BLADE COVERS, Cold Weather Type (set of 4) | 1 | |
| 429-315 | BLADE COVERS, Cold Weather Type, w/Tie-Down Add-On Detail (set of 4) | 1 | |
| 429-350 | BLADE TIE-DOWNS, (semi rigid) w/telescoping attachment handle (set of 5) | 1 | |
| 429BF-100-1 | BELL 429 BLADE FOLD PROVISIONS | 1 | |
| 429BF-2500-1 | BLADE SUPPORT ASSY | 1 | |
| 429BF-600-1 | 429 BLADE FOLD KIT, COMPLETE | 1 | |
| 429BF-600-3 | BLADE FOLD, CLAMP | 1 | |
| 429BF-900-1 | BLADE FOLD KIT | 1 | |
| 43-479-5 | HSS ADJUSTABLE BLADE REAMER | 1 | |
| 43-491-0 | HSS ADJUSTABLE BLADE REAMER | 1 | |
| 43-492-8 | HSS ADJUSTABLE BLADE REAMER | 1 | |
| 43-497-7 | HSS ADJUSTABLE BLADE REAMER SET 16 | 1 | |
| 430-310 | BLADE COVERS (set of 4) | 1 | |
| 430-320 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| 430-400 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| 4325 | PREMIUM HSO BLADE FOR HOTKNIVES | 1 | |
| 441-124 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 441-125 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 441-126 | SPINNER COVERS, 3-blade (set of 2) | 1 | |
| 441-127 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 441-128 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 445 SERIES | MICROMETER DEPTH GAGES WITH NON-ROTATING BLADES | 1 | |
| 445-1X | Apex® Slotted Insert Bits (Blade thickness: .034") (Blade width: 3/16") (Overall length: 1") (Screw size: 4F-5R) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) | 2 | |
| 445-2X | Apex® Slotted Insert Bits (Blade thickness: .034") (Blade width: 3/16") (Overall length: 1") (Screw size: 4F-5R) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .040") (Blade width: 7/32") (Overall length: 1") (Screw size: 6F-8R) (Typ | 1 | |
| 445-3X | Apex® Slotted Insert Bits (Blade thickness: .034") (Blade width: 3/16") (Overall length: 1") (Screw size: 4F-5R) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .040") (Blade width: 7/32") (Overall length: 1") (Screw size: 6F-8R) (Typ | 1 | |
| 445-4X | Apex® Slotted Insert Bits (Blade thickness: .034") (Blade width: 3/16") (Overall length: 1") (Screw size: 4F-5R) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .040") (Blade width: 7/32") (Overall length: 1") (Screw size: 6F-8R) (Typ | 1 | |
| 445-5X | Apex® Slotted Insert Bits (Blade thickness: .034") (Blade width: 3/16") (Overall length: 1") (Screw size: 4F-5R) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .040") (Blade width: 7/32") (Overall length: 1") (Screw size: 6F-8R) (Typ | 1 | |
| 445-6X | Apex® Slotted Insert Bits (Blade thickness: .034") (Blade width: 3/16") (Overall length: 1") (Screw size: 4F-5R) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .040") (Blade width: 7/32") (Overall length: 1") (Screw size: 6F-8R) (Typ | 1 | |
| 45-090 | Wire Stripper (8-12 AWG) with L-4419 Blade | 4 | |
| 45-098 | WIRE STRIPPER, 20-30 AWG DIAMETER OF CUTTING BLADE | 6 | |
| 45-128 | Swivel Blade Cable Stripper 3/4 Inch O.D. | 2 | |
| 45-129 | Swivel Blade Cable Stripper 1-1/2 Inch O.D. | 3 | |
| 45-1316-1 | BLADE PACK FOR 45-1316(MTO-3MIN) | 1 | |
| 45-1513-1 | Blade Pack for 45-1513 | 2 | |
| 45-1551-1 | Blade Pack for 45-1551 | 2 | |
| 45-1608-1 | Ideal Blade Set | 3 | |
| 45-1609-1 | Blade Pack for 45-1609 | 2 | |
| 45-1610-1 | Blade Pack for 45-1610 | 4 | |
| 45-1611-1 | Blade Pack for 45-1611 | 3 | |
| 45-162 | Gray Adjustable Blade Ringer™ Stripper | 5 | |
| 45-163 | Blue Adjustable Blade Ringer™ Stripper | 6 | |
| 45-1633-1 | Blade Pack for 45-1633 | 2 | |
| 45-164 | Blue Adjustable Blade Ringer™ Stripper | 7 | |
| 45-165 | Black Adjustable Blade Ringer™ Stripper | 5 | |
| 45-1654-1 | Custom Stripmaster Blade Set for 45-1654 | 3 | |
| 45-1672-1 | BLADE SET(MTO-3MIN) AS5768/1-B22 | 1 | |
| 45-1715-1 | CUSTOM STRIPMASTER BLADE PACK(MTO) | 1 | |
| 45-1758-1 | Blade Pack for 45-1758 | 2 | |
| 45-1773-1 | Blade Pack for 45-1773 | 4 | |
| 45-1774-1 | WIRE STRIPPER BLADE | 2 | |
| 45-1924-1 | BLADE PACK FOR 45-1924(MTO) AS5768/1-B24 | 1 | |
| 45-1939-1 | BLADE PACK | 4 | |
| 45-1952-1 | DBLD-SET BLADES CUSTOM,16-26GA.(MTO) | 1 | |
| 45-1987-1 | Blade Pack for 45-1987 | 5 | |
| 45-2014-1 | REPLACEMNT BLADE PACK (IDEAL)(MTO) | 1 | |
| 45-2020-1 | Blade Pack for 45-2020 | 5 | |
| 45-2114-1 | BLADE PACK 26-20 STRIPMASTER LITE(MTO) | 1 | |
| 45-2118-1 | Blade Pack for 45-2118 | 2 | |
| 45-2133-1 | Blade Pack for 45-2133 | 2 | |
| 45-2138-1 | ideal blades | 1 | |
| 45-2500-1 | Blade Pack | 2 | |
| 45-2541-1 | Blade Pack for 45-2541 10-14 AWG | 2 | |
| 45-2542-1 | BLADE PACK(MTO) AS5768/1-B12 | 1 | |
| 45-2543-1 | Blade Pack for 45-2543 | 2 | |
| 45-2544-1 | BLADE PACK(MTO) AS5768/1-B13 | 1 | |
| 45-2564-1 | Blade Pack for 45-2564 | 2 | |
| 45-2618-1 | Blade Pack for 45-2618 | 2 | |
| 45-2685-1 | Blade Pack for 45-2685 | 2 | |
| 45-2686-1 | BLADE PACK FOR 45-2686 (MTO) | 1 | |
| 45-2694-1 | BLADE SET(MTO) | 1 | |
| 45-2824-1 | BLADE PACK | 2 | |
| 45-2825-1 | BLADE PACK | 3 | |
| 45-2828-1 | WIRE STRIPPER BLADE | 1 | |
| 45-400 | Ringer Cable Stripper Small V No Blade | 4 | |
| 45-401 | Ringer Cable Stripper 5 Mil Insulated w Blade | 3 | |
| 45-402 | Ringer Cable Stripper 8-10 Mil Insulated with Blade | 2 | |
| 45-403 | Ringer Cable Stripper Standard No Blade | 5 | |
| 45-404 | Ringer Cable Stripper Deep "V" No Blade | 2 | |
| 470.103-X | FEELER GAUGE 20 BLADE 0.05-1.00mm | 1 | |
| 480-400 | BLADE COVERS (set of 3) | 1 | |
| 480-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| 480-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| 485-1X | Apex® Slotted Insert Bits (Blade thickness: .034") (Blade width: 3/16") (Overall length: 1") (Screw size: 4F-5R) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .040") (Blade width: 7/32") (Overall length: 1") (Screw size: 6F-8R) (Typ | 1 | |
| 485-2X | Apex® Slotted Insert Bits (Blade thickness: .034") (Blade width: 3/16") (Overall length: 1") (Screw size: 4F-5R) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .040") (Blade width: 7/32") (Overall length: 1") (Screw size: 6F-8R) (Typ | 1 | |
| 485-3X | Apex® Slotted Insert Bits (Blade thickness: .034") (Blade width: 3/16") (Overall length: 1") (Screw size: 4F-5R) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .040") (Blade width: 7/32") (Overall length: 1") (Screw size: 6F-8R) (Typ | 1 | |
| 485-4X | Apex® Slotted Insert Bits (Blade thickness: .034") (Blade width: 3/16") (Overall length: 1") (Screw size: 4F-5R) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .040") (Blade width: 7/32") (Overall length: 1") (Screw size: 6F-8R) (Typ | 1 | |
| 49-12300 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12301 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12312 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12324 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12330 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12331 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12354 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-12361 | Dotco® Saw Blades (Description: Circular, 1/4" Arbor Hole) (Diameter: 1-1/4") (Maximum cut: 3/32" D x 1/16" W) (Recommended use: Alum. Laminated Plastic, Wood) (Teeth/grit: 44) (Type: High Speed Steel) (Add to cart: Contact us to order) (Description: Circ | 1 | |
| 49-1810 | Saw Blades for Reciprocating Saw (5 Pack) (Reference number: Metals Over 1/8" Thick) (Teeth per inch: 14) (Overall length: 6" (152 mm)) (Add to cart: Contact us to order) | 1 | |
| 49-1811 | Saw Blades for Reciprocating Saw (5 Pack) (Reference number: Metals Over 1/8" Thick) (Teeth per inch: 14) (Overall length: 6" (152 mm)) (Add to cart: Contact us to order) (Reference number: Metals To 1/8" Thick) (Teeth per inch: 18) (Overall length: 6" (1 | 1 | |
| 49-1812 | Saw Blades for Reciprocating Saw (5 Pack) (Reference number: Metals Over 1/8" Thick) (Teeth per inch: 14) (Overall length: 6" (152 mm)) (Add to cart: Contact us to order) (Reference number: Metals To 1/8" Thick) (Teeth per inch: 18) (Overall length: 6" (1 | 1 | |
| 49-1813 | Saw Blades for Reciprocating Saw (5 Pack) (Reference number: Metals Over 1/8" Thick) (Teeth per inch: 14) (Overall length: 6" (152 mm)) (Add to cart: Contact us to order) (Reference number: Metals To 1/8" Thick) (Teeth per inch: 18) (Overall length: 6" (1 | 1 | |
| 49-1814 | Saw Blades for Reciprocating Saw (5 Pack) (Reference number: Metals Over 1/8" Thick) (Teeth per inch: 14) (Overall length: 6" (152 mm)) (Add to cart: Contact us to order) (Reference number: Metals To 1/8" Thick) (Teeth per inch: 18) (Overall length: 6" (1 | 1 | |
| 49-1815 | Saw Blades for Reciprocating Saw (5 Pack) (Reference number: Metals Over 1/8" Thick) (Teeth per inch: 14) (Overall length: 6" (152 mm)) (Add to cart: Contact us to order) (Reference number: Metals To 1/8" Thick) (Teeth per inch: 18) (Overall length: 6" (1 | 1 | |
| 49-1816 | Saw Blades for Reciprocating Saw (5 Pack) (Reference number: Metals Over 1/8" Thick) (Teeth per inch: 14) (Overall length: 6" (152 mm)) (Add to cart: Contact us to order) (Reference number: Metals To 1/8" Thick) (Teeth per inch: 18) (Overall length: 6" (1 | 1 | |
| 49-1819 | Saw Blades for Reciprocating Saw (5 Pack) (Reference number: Metals Over 1/8" Thick) (Teeth per inch: 14) (Overall length: 6" (152 mm)) (Add to cart: Contact us to order) (Reference number: Metals To 1/8" Thick) (Teeth per inch: 18) (Overall length: 6" (1 | 1 | |
| 49-300 | Diamond Jigsaw Blades (Flashlight: Black & Decker & Competitive) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) | 1 | |
| 49-301 | Diamond Jigsaw Blades (Flashlight: Black & Decker & Competitive) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) (Flashlight: Rockwell Bayonet) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) | 1 | |
| 49-302 | Diamond Jigsaw Blades (Flashlight: Black & Decker & Competitive) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) (Flashlight: Rockwell Bayonet) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) (Flashlight: Bosch Style) (Over | 1 | |
| 49-303 | Diamond Jigsaw Blades (Flashlight: Black & Decker & Competitive) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) (Flashlight: Rockwell Bayonet) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) (Flashlight: Bosch Style) (Over | 1 | |
| 49-304 | Diamond Jigsaw Blades (Flashlight: Black & Decker & Competitive) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) (Flashlight: Rockwell Bayonet) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) (Flashlight: Bosch Style) (Over | 1 | |
| 49-305 | Diamond Jigsaw Blades (Flashlight: Black & Decker & Competitive) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) (Flashlight: Rockwell Bayonet) (Overall length: 3" (76 mm)) (Add to cart: Contact us to order) (Flashlight: Bosch Style) (Over | 1 | |
| 49-93-7020 | SEGMENTED DIAMOND BLADE 7 | 1 | |
| 49-MS1-1/2S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) | 1 | |
| 49-MS1-1/2U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS1-1/4S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS1-1/4U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS1S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS1U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS2-1/2S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS2-1/2U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS2S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS2U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS3-1/2S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS3-1/2U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS3/4S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS3/4U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS3S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS3U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS4-1/2S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS4-1/2U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS4S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS4U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS5S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS5U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS6S | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-MS6U | Mounted Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .080" to .100") (Add t | 1 | |
| 49-SB1-1/2S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) | 1 | |
| 49-SB1-1/2U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB10S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB10U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB1S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB1U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB2-1/2S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB2-1/2U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB2S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB2U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB3-1/2S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB3-1/2U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB3S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB3U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB4S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB4U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB5S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB5U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB6S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB6U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB7S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB7U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB8S | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 49-SB8U | Arbor Mount Diamond Plated Saw Blades (Type: Slotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (Add to cart: Add To Cart) (Type: Unslotted) (Outside diameter: 1-1/2" (38 mm)) (Plated thickness (kerf): .060" to .080") (A | 1 | |
| 4920-01-112-4939 | CLAMP ASSEMBLY, BLADE^2^ | 1 | |
| 4920-01-437-1455 | INSTALL KIT COMPRESSOR BLADE WIDE CORE | 1 | |
| 4920-99-225-8256 | STAGE 1 BLADE HOLDER | 1 | |
| 493 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 1 | |
| 4965A | CRANKSHAFT BLADE AND DAMPENER BUSHING REMOVERS REPLACERS FOR 5/8 ID BUSHING | 1 | |
| 49G988 | 1 HP Vertical Band Saw, Voltage: 115/230, Max. Blade Length: 114" | 1 | |
| 4C-9943 | RECIP SAW BLADES 5PK | 1 | |
| 5.08036.001 | HPC BLADE BLENDING SCOPE KIT | 2 | |
| 5.08136.001 | KIT - SCOPE, BLENDING, HPC BLADES | 2 | |
| 5.08236.001 | KIT - BORESCOPE, BLENDING HPC ROTOR BLADES | 1 | |
| 500C-400 | BLADE COVERS (set of 4) | 1 | |
| 500C-402 | BLADE COVERS, w/ tie downs (set of 4) | 1 | |
| 500C-403 | BLADE COVERS, hail protection, w/ tie-downs (set of 4) | 1 | |
| 500C-410 | BLADE COVERS, cold weather type (set of 4) | 1 | |
| 500C-411 | BLADE COVERS, cold weather type, hail protection (set of 4) | 1 | |
| 500C-412 | BLADE COVERS, cold weather type, hail protection w/tie-downs (set of 4) | 1 | |
| 500C-500 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| 500D-400 | BLADE COVERS (set of 5) | 1 | |
| 500D-405 | BLADE COVERS w/tie downs (set of 5) | 1 | |
| 500D-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 5) | 1 | |
| 500D-500 | BLADE TIE-DOWNS (fabric type) (set of 5) | 1 | |
| 500E-400 | BLADE COVERS, E-model (set of 5) | 1 | |
| 6047 | BLADE TIP REFLECTORS (TAPE) | 1 | |
| 50181 | NOGA OEBURRING TOOL WITH 1 BLADE | 1 | |
| 50188 | NOGA PIECE DEBUR BLADES | 1 | |
| 50193 | CHISEL FLAT 3/4" BLADE WIDTH 5" LONG 0.401 | 1 | |
| 505-400 | BLADE COVERS (set of 2) | 1 | |
| 505-410 | BLADE COVERS (cold weather type) (set of 2) | 1 | |
| 505-415 | BLADE COVERS w/ tie-down details (set of 2) | 1 | |
| 505-420 | BLADE COVERS (cold weather type) w/ tie-down details (set of 2) | 1 | |
| 505-500 | BLADE TIE-DOWNS, w/ telescoping attachment pole (set of 3) | 1 | |
| 505-610 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| 520-100 | ROTOR HUB/DOGHOUSE COVER (blades removed) | 1 | |
| 520-300 | BLADE COVERS (set of 5) | 1 | |
| 520-310 | BLADE COVERS (COLD WEATHER TYPE) (set of 5) | 1 | |
| 520-500 | BLADE TIE-DOWNS (fabric type) (set of 5) | 1 | |
| 5300A | HIGH SPEED AIR SAW W/BLADES | 2 | |
| 536-136 | BLADE VERNIER CALIPER 0-300MM | 1 | |
| 56005 | BLADE RIVET SET | 1 | |
| 57083 | PNEUMATIC BODY SAW 10000 RPM / BLADES 18T-24T-32T | 1 | |
| 573-734 | Mitutoyo 573-734 ABSOLUTE Digimatic Blade Caliper 0-150mm / 0-6" | 1 | |
| 5837022-11 | FAN BLADE RETAINER | 1 | |
| 5837097-1 | FAN BLADE INSTALLATION TOOL | 1 | |
| 5837203-23 | REMOVAL TOOL FAN BLADE RETAINER | 1 | |
| 58A131 | BLADE SET | 1 | |
| 58P-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 58P-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 58P-140 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 58P-145 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 58TC-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 58TC-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| 58TC-140 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 58TC-145 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| 5A0898 | FRONT BLADE RETAINING RING | 1 | |
| 600-112 | DOGHOUSE/MAIN INTAKE/ENGINE AREA/ROTOR HUB COVER (a/c models, blades removed) | 1 | |
| 600-400 | BLADE COVERS (set of 6) | 1 | |
| 600-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 6) | 1 | |
| 600-500 | BLADE TIE-DOWNS (fabric type) (set of 6) | 1 | |
| 601-329 | REPLACEABLE CUTTING BLADES FOR THE TOOL А30199 (601-329) | 1 | |
| 601-330 | REPLACEABLE CUTTING BLADES FOR THE TOOL А40199 (601-330) | 1 | |
| 603995-6 | COAX CABLE 3BLADE COMM BNC | 1 | |
| 60535 | BLADE RIVET GAGE | 1 | |
| 606700-1 | CABLE STRIPPER / SLITTER & REPLACEMENT BLADE | 1 | |
| 608-369C-F | WIRE STRIPPER 8-22 AWG DIAMETER OF CUTTING BLADE | 1 | |
| 61-0019-01 | PROP BUILD UP STAND PORTABLE AOG 4 OR 6 BLADE | 2 | |
| 611000GSE170 | TOOL PROP PITCH CHANGE (BLADE BAT) | 1 | |
| 62877 | MANUAL REAMER WITH UNIVERSAL BLADE | 1 | |
| 62879 | MANUAL REAMER WITH BLADE FOR BRASS | 1 | |
| 62902 | BLADE FOR PLASTIC PIPE CUTTER 67564 | 1 | |
| 63084 | BLADE FOR ELECTRIC PIPE CUTTER FOR PLASTIC (REF. 63083) | 1 | |
| 63368 | MINI MANUAL REAMER (PLASTIC) WITH UNIVERSAL BLADE | 1 | |
| 63370 | METALLIC MANUAL REAMER WITH UNIVERSAL BLADE | 1 | |
| 63371 | MANUAL REAMER MULTI WITH UNIVERSAL BLADE | 1 | |
| 63372 | MANUAL REAMER MINI (PLASTIC) WITH BLADE FOR BRASS | 1 | |
| 63374 | METALLIC MANUAL REAMER WITH BLADE FOR BRASS | 1 | |
| 63375 | MANUAL REAMER MULTI WITH BLADE FOR BRASS | 1 | |
| 63771 | HACK SAW BLADE 6" HARDENED SPECIAL STEEL | 1 | |
| 63811-7200 | Hand Crimp Tool for Flat Blade Crimp Terminal | 1 | |
| 63811-7300 | Hand Crimp Tool for Flat Blade Crimp Terminal | 1 | |
| 63817-0070 | Straight Blade Stripping Cassette for PVC Insulation 8 to 34 AWG | 1 | |
| 63817-0071 | "V" Blade Stripping Cassette for PTFE Insulation 12 to 28 AWG | 1 | |
| 63817-0072 | Straight Blade Stripping Cassette for PVC Insulation 5 to 10 AWG | 1 | |
| 63823-2500 | Hand Crimp Tool for Female Flat Blade Crimp Terminals | 1 | |
| 63823-2600 | Hand Crimp Tool for Female Flat Blade Crimp Terminals | 3 | |
| 63823-2670 | Modular Crimp Head for Sabre Female Flat Blade Crimp Terminals | 1 | |
| 63823-2700 | Hand Crimp Tool for Female Flat Blade Crimp Terminals | 1 | |
| 63823-2800 | Hand Crimp Tool for Female Flat Blade Crimp Terminals | 1 | |
| 63823-3100 | Hand Crimp Tool for Male Flat Blade Crimp Terminals | 1 | |
| 63823-3170 | Modular Crimp Head For Hand Crimp Tool for Sabre Male Flat Blade Crimp Terminals | 1 | |
| 63823-3200 | Hand Crimp Tool for Male Flat Blade Crimp Terminals | 1 | |
| 63823-3600 | Hand Crimp Tool for ISO (M3) Blade Terminals | 1 | |
| 7724 | BLADE 8 INCHES (200MM) | 1 | |
| 7729 | FLAT BLADE 12 INCHES (305 MM) | 1 | |
| 8068 | CRANKSHAFT BLADE AND DAMPER BUSHING REMOVERS REPLACERS FOR .604 ID BUSHING | 1 | |
| 8400 | BLADES | 5 | |
| 63868 | CUTTING BLADE 18 MM FOR CUTTER COD. 63874 (BOX O OF 5 PCS) | 1 | |
| 63869 | HOOK TYPE BLADE | 1 | |
| 63870 | BLADES FOR AUTOMATIC WIRE STRIPPER 0,5/1,2/1,6/2,0 MM | 1 | |
| 63871 | BLADES FOR AUTOMATIC WIRE STRIPPER 1,0/1,6/2,0/2,6/3,2 MM | 1 | |
| 63872 | BLADES FOR AUTOMATIC WIRE STRIPPER 0,9/1,25/2,0/3,5/5,5 MM | 1 | |
| 63873 | BLADE FOR THE DISMANTLING TOOL 4,5 - 25 MM | 1 | |
| 63876 | CUTTER WITH AUTO-RETRACTABLE BLADE | 1 | |
| 63877 | CUTTER WITH AUTO-RETRACTABLE BLADE | 1 | |
| 63878 | CUTTER WITH AUTO-RETRACTABLE BLADE WITH PLASTIC BODY | 1 | |
| 63911-2900 | T2 Terminator for Flat Blade Crimp Terminal | 1 | |
| 63940 | BLADE FOR PLASTIC PIPE CUTTER FOR 63933 | 1 | |
| 64003 | BLADE FOR PLASTIC PIPE CUTTER 42 MM REF. 63200 | 1 | |
| 64004 | BLADE FOR AUTOMATIC PLASTIC PIPE CUTTER 35 MM REF. 63201 | 1 | |
| 64005 | CUTTING BLADE 0.6 FOR CUTTERS | 1 | |
| 64008 | REAMER BLADE FOR 42 MM TUBE CUTTER | 1 | |
| 64039 | BLADE FOR PLASTIC PIPE CUTTER 42 MM PIRAINA® REF. 63204 | 1 | |
| 64045 | BLADE FOR KEVLAR PIPE CUTTER 42 MM PIRAINA® REF.63205 | 1 | |
| 64107 | BLADE FOR PLASTIC PIPE CUTTER 63203 | 1 | |
| 64177 | SET OF BLADES FOR ELECTROHYDRAULIC REBAR CUTTER 16 MM | 1 | |
| 64239 | BLADE FOR JACK PLANE | 1 | |
| 64246 | BLADE DRILL 1" FOR ELECTRIC PIPE CLEANER | 1 | |
| 64412 | BLADE FOR WOOD F/RECIPROCATING SAW | 1 | |
| 64433 | HACKSAW BLADE CARBON STEEL 14 TPI | 1 | |
| 64434 | HACKSAW BLADE CARBON STEEL 18 TPI | 1 | |
| 64435 | HACKSAW BLADE CARBON STEEL 24 TPI | 1 | |
| 64436 | HACKSAW BLADE CARBON STEEL 32 TPI | 1 | |
| 64437 | HACKSAW BLADE HSS BIMETAL 14 TPI | 1 | |
| 64438 | HACKSAW BLADE HSS BIMETAL 18 TPI | 1 | |
| 64439 | HACKSAW BLADE HSS BIMETAL 24 TPI | 1 | |
| 64440 | HACKSAW BLADE HSS BIMETAL 32 TPI | 1 | |
| 64441 | HACKSAW BLADE SUPER HSS BIMETAL 14 TPI | 1 | |
| 64442 | HACKSAW BLADE SUPER HSS BIMETAL 18 TPI | 1 | |
| 64443 | HACKSAW BLADE SUPER HSS BIMETAL 24 TPI | 1 | |
| 64444 | HACKSAW BLADE SUPER HSS BIMETAL 32 TPI | 1 | |
| 64446 | REAMER BLADE 47 MM FOR BRASS | 1 | |
| 64447 | REAMER BLADE 26 MM | 1 | |
| 64448 | REAMER BLADE 26 MM FOR BRASS | 1 | |
| 64449 | SCRAPER BLADE 120 MM | 1 | |
| 64688 | BLADE FOR PVC PIPE CUTTER 35 MM REF.63199 | 1 | |
| 64692 | SET OF BLADES FOR REBARMATIC 16 PORTABLE | 1 | |
| 64751 | BLADE FOR PLASTIC PIPE CUTTER 51 MM REF. 63846 | 1 | |
| 64752 | BLADE FOR PLASTIC PIPE CUTTER 64 MM REF. 63847 AND 76145 | 1 | |
| 65-53746-315 | BLADE ASSY | 1 | |
| 65-53746-316 | BLADE ASSY | 1 | |
| 65388 | KNIFE (BLADE 70 MM) | 1 | |
| 65550 | FEELER GAUGE 8 BLADES, 150 MM, 0.05-0.5 MM (0,002-0,020 INCH) | 1 | |
| 65551 | FEELER GAUGE 13 BLADES, 150 MM, 0.05-1.00 MM (0,002-0,040 INCH) | 1 | |
| 65552 | FEELER GAUGE 20 BLADES, 150 MM, 0.05-1.00 MM (0,002-0,040 INCH) | 1 | |
| 65553 | FEELER GAUGE 8 BLADES, 200 MM, 0.05-0.5 MM (0,002-0,020 INCH) | 1 | |
| 65554 | FEELER GAUGE 13 BLADES, 200 MM, 0.05-1.00 MM (0,002-0,040 INCH) | 1 | |
| 65555 | FEELER GAUGE 20 BLADES, 200 MM, 0.05-1.00 MM (0,002-0,040 INCH) | 1 | |
| 65556 | FEELER GAUGE 8 BLADES, 300 MM, 0.05-0.5 MM (0,002-0,020 INCH) | 1 | |
| 65557 | FEELER GAUGE 13 BLADES, 300 MM, 0.05-1.00 MM (0,002-0,040 INCH) | 1 | |
| 65558 | FEELER GAUGE 20 BLADES, 300 MM, 0.05-1.00 MM (0,002-0,040 INCH) | 1 | |
| 65559 | PRECISION FEELER GAUGE 8 BLADES, 100 MM, 0.03-0.1 MM (0,002-0,040 INCH) | 1 | |
| 65560 | PRECISION FEELER GAUGE 8 BLADES, 100 MM, 0.05-0.5 MM (0,002-0,020 INCH) | 1 | |
| 65561 | THREAD PITCH GAUGE 52 BLADES, 0,25 -6,00/4-62 TPI | 1 | |
| 65562 | PRECISION FEELER GAUGE 10 BLADES, 100 MM, 0.1-1 MM (0,004-0,040 INCH) | 1 | |
| 65565 | PRECISION FEELER GAUGE 18 BLADES, 100 MM, 0.05- 1 MM (0,002-0,040 INCH) | 1 | |
| 65568 | PRECISION FEELER GAUGE 21 BLADES, 100 MM, 0.1- 0.5 MM. (0,004-0,020 INCH) | 1 | |
| 65569 | PRECISION FEELER GAUGE 21 BLADES, 100 MM, 0.05- 2 MM (0,002-0,080 INCH) | 1 | |
| 65570 | PRECISION FEELER GAUGE 32 BLADES, 100 MM, 0.03- 1 MM (0,0012-0,040 INCH) | 1 | |
| 65571 | THREAD PITCH GAUGE 24 BLADES, 0.25 - 6.00 MM | 1 | |
| 65572 | THREAD PITCH GAUGE 28 BLADES 4-62 TPI | 1 | |
| 65573 | THREAD PITCH GAUGE 6 BLADES 8-28 TPI | 1 | |
| 65574 | THREAD PITCH GAUGE 30 BLADES 4-42 TPI | 1 | |
| 65575 | THREAD PITCH GAUGE 30 BLADES 6-60 TPI | 1 | |
| 65576 | THREAD PITCH GAUGE 12 BLADES 2-20 MM | 1 | |
| 65577 | THREAD PITCH GAUGE 16 BLADES 1-12 TPI | 1 | |
| 65578 | RADIUS GAUGE 17 BLADES, 1.0 - 7.0 MM | 1 | |
| 65579 | RADIUS GAUGE 16 BLADES, 7,5 - 15 MM | 1 | |
| 65580 | RADIUS GAUGE 15 BLADES, 15,5 - 25 MM | 1 | |
| 65581 | RADIUS GAUGES 15 BLADE, 1/32" - 1/4" | 1 | |
| 65582 | RADIUS GAUGES 16 BLADES, 17/64" - 1/2" | 1 | |
| 65583 | RADIUS GAUGES 16 BLADES, 17/32" - 1" | 1 | |
| 65584 | ANGLE GAUGES 20 BLADES 1º - 45º | 1 | |
| 65823 | PROTRACTOR WITH MOVEABLE BLADE 100 X 150 | 1 | |
| 65824 | PROTRACTOR WITH MOVEABLE BLADE 150 X 300 | 1 | |
| 65825 | PROTRACTOR WITH MOVEABLE BLADE 200 X 400 | 1 | |
| 66501 | SCREWDRIVER BALL TIP 2,5 X 75 W/ HEX. BLADE MASTERTORK | 1 | |
| 66502 | SCREWDRIVER BALL TIP 3 X 75 W/ HEX. BLADE MASTERTORK | 1 | |
| 66503 | SCREWDRIVER BALL TIP 4 X 100 W/ HEX. BLADE MASTERTORK | 1 | |
| 66504 | SCREWDRIVER BALL TIP 5 X 100 W/ HEX. BLADE MASTERTORK | 1 | |
| 66505 | SCREWDRIVER BALL TIP 6 X 125 W/ HEX. BLADE MASTERTORK | 1 | |
| 66506 | SCREWDRIVER BALL TIP 8 X 150 W/ HEX. BLADE MASTERTORK | 1 | |
| 66507 | SCREWDRIVER BALL TIP 10 X 150 W/ HEX. BLADE MASTERTORK | 1 | |
| 66844 | BIT HOLDER 1/4" WITH FLEXIBLE BLADE | 1 | |
| 67779 | PRECISION FEELER GAUGE 32 BLADES, 100 MM, 0,03- 1,0 MM (0,01 - 0,04 INCH) | 1 | |
| 6796950-7 | PULLER PLATEFORMS FAN BLADES | 1 | |
| 67980 | BLADE FOR EXTERNAL REAMER 67978 | 1 | |
| 69008-1083 | Insertion Blade for Parallel Action Handtool 690081080 for Connectors, 4-26 Circuit | 1 | |
| 69008-1093 | Insertion Blade for Parallel Action Handtool 690081090 for Connectors, 4-26 Circuit | 1 | |
| 69127-5127 | Insertion Blade for Connector | 1 | |
| 6934T93P02 | BLADE STG2 COND NE/NS | 1 | |
| 69525 | PENKNIFE 84 MM (BLADE) PLASTIC HANDLE | 1 | |
| 69526 | KNIFE 73 MM (BLADE) WOODEN HANDLE | 1 | |
| 6A7614 | BLADE ASSY | 1 | |
| 6F1000G02351 | TAIL ROTOR BLADE PROTECTION | 1 | |
| 6F6210A08331A563A | M/R BLADE COVER BONDING TOOL | 1 | |
| 6F6210G00131 | BLADE LIFTING | 1 | |
| 6F6210G00231 | MR. BLADE RETENTION KIT | 1 | |
| 6F6210G00831 | MR BLADE TRIM TAB BENDING | 1 | |
| 6F6210G02131 | MAIN ROTOR BLADE LIFTING | 1 | |
| 70-700-CRK-041 | BLADE REPAIR SET | 1 | |
| 70121 | USATCO Panel Saws (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 2-1/2") (Depth of cut: 5/8") (Add to cart: Add To Cart) | 1 | |
| 70122 | USATCO Panel Saws (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 2-1/2") (Depth of cut: 5/8") (Add to cart: Add To Cart) (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 3-3/8") (Depth of cut: 5/8") (Add to cart | 1 | |
| 70123 | USATCO Panel Saws (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 2-1/2") (Depth of cut: 5/8") (Add to cart: Add To Cart) (Rpm: 2200) (Material capacity: 16 Gauge Mild Steel) (Blade capacity: 3-3/8") (Depth of cut: 5/8") (Add to cart | 1 | |
| 506510 | BLADE 10TH STG * | 12 | |
| 538520 | LOCK-COMPR BLADE (STG 11) | 1 | |
| 538521 | LOCK-COMPR BLADE (STG 12) | 1 | |
| 538522 | LOCK-COMPR BLADE (STG 13) | 1 | |
| 703A93-1130-01/PHP | BLADE TRIM TAB | 1 | |
| 703A94-11130-01 | BLADE TRIM TAB | 1 | |
| 703A94-1130-01 | BLADE TRIM TAB | 2 | |
| 703A94-1130-01/PHP | BLADE TRIM TAB | 1 | |
| 703A94113001 | BLADE TRIM TAB | 2 | |
| 703A94113001/PHP | BLADE TRIM TAB | 1 | |
| 703A95‐0000‐21 | 80 BLADE HOLDER | 1 | |
| 703A95‐0000‐22 | 90 BLADE"DIA 6" | 1 | |
| 703A95‐0000‐23 | 100 BLADE"DIA 8" | 1 | |
| 70505A2 | SPATULA - PLASTIC, STIFF 6 3/8" OAL; 1"X2.75" BLADE | 1 | |
| 70700-20324-041 | BLADE CLAMP ASSY (60M) | 1 | |
| 70700-20324-047 | BLADE CLAMP | 1 | |
| 70700-20369-041 | LOCK AY,BLADE | 1 | |
| 70700-20369-102 | BLADE TIEDOWN ROPES (2) | 1 | |
| 70700-20394-111 | PUNCH DRIFT (BLADE STAKE TOOL) | 1 | |
| 70700-20426-041 | MAIN AND TAIL ROTOR BLADE ADAPTER ASSEMBLY | 1 | |
| 70700-20426-041-TM | MANUAL,TECH MAIN AND TAIL ROTOR BLADE STORAGE/TRAN | 1 | |
| 70700-25601-103 | BLADE TRACKER MOUNTING BRACKET WEATHER SHIELD | 1 | |
| 70700-77207-101 | TEMPLATE, BLADE FOLD SPREAD PIN | 1 | |
| 70700-77341-041 | MAIN ROTOR BLADE ROUTING FIXTURE, CONSISTING OF: | 1 | |
| 70700-77394 | WRENCH, BLADE REMOVAL & INSTALLATION | 1 | |
| 70700-77394-101 | WRENCH, BLADE REMOVAL & INSTALLATION | 1 | |
| 70700-77453-041 | TEST SET, BLADE FOLD HARNESS | 1 | |
| 70700-77515-043 | MAIN ROTOR BLADE RESTRAINER SET | 1 | |
| 70700-77687-041 | BLADE DEICE TEST HARNESS KIT | 1 | |
| 70746 | Cold Chisels (Stroke: 7/16") (Blade width: 1/2") (Overall length: 6" (15.2 cm)) (Add to cart: Add To Cart) | 1 | |
| 70747 | Cold Chisels (Stroke: 7/16") (Blade width: 1/2") (Overall length: 6" (15.2 cm)) (Add to cart: Add To Cart) (Stroke: 7/8") (Blade width: 1") (Overall length: 8" (20.3 cm)) (Add to cart: Add To Cart) | 1 | |
| 71562 | LONG BLADE SCRAPER 60 X 185 MM NON SPARKING Cu-Be | 1 | |
| 71563 | LONG BLADE SCRAPER 100 x 225 MM NON SPARKING Cu-Be | 1 | |
| 71564 | LONG BLADE SCRAPER 150 x 180 MM NON SPARKING Cu-Be | 1 | |
| 71565 | LONG BLADE SCRAPER 125 X 225 MM NON SPARKING Cu-Be | 1 | |
| 71566 | LONG BLADE SCRAPER 60 X 185 MM NON SPARKING Al-Bron | 1 | |
| 71567 | LONG BLADE SCRAPER 100 X 225 MM NON SPARKING Al-Bron | 1 | |
| 71568 | LONG BLADE SCRAPER 150 X 180 MM NON SPARKING Al-Bron | 1 | |
| 71569 | LONG BLADE SCRAPER 125 X 225 MM NON SPARKING Al-Bron | 1 | |
| 71700-77104-049 | MAIN ROTOR BLADE GUIDE POLE | 1 | |
| 72-0063-01-IAS | GE CF34-8 COMPRESSOR BLADE SERVICE CART | 1 | |
| 72223 | HACK SAW BLADE 300 MM NON SPARKING Cu-Be | 1 | |
| 726534-2 | BLADE KIT | 1 | |
| 729827A5T2 | BLADE,HP,1ST STAGE | 1 | |
| 731920A0K4 | HP BLADE | 1 | |
| 732021 | COVER - TURBINE BLADE, RAM AIR TURBINE (RAT) | 3 | |
| 734-860 | BLADE, WIRE STRIPPER,16-25AWG | 1 | |
| 734734 | COVER HUB BLADE RAT | 6 | |
| 737315 | LOCK-COMPR BLADE (STG 11) | 1 | |
| 737316 | LOCK-COMPR BLADE (STG 12) | 1 | |
| 737317 | LOCK-COMPR BLADE (STG 13) | 1 | |
| 740465 | LOCK-COMPR BLADE(9STG) | 1 | |
| 741317 | LOCK-COMPR BLADE(9STG) | 1 | |
| 74_Z-0-0-68 | TOOL OTHER BLADE WITH, PROTECTOR, COAXIAL | 1 | |
| 750XL-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| 750XL-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| 7571-02-5 | REPLACEMENT BLADE | 1 | |
| 7571-04-5 | REPLACEMENT BLADE | 1 | |
| 7571-06-5 | REPLACEMENT BLADE | 1 | |
| 7572-3-5 | REPLACEMENT BLADE | 1 | |
| 79729 | SAW BLADE HSS BI-METAL 10-14 TPI 250 MM FOR SABRE SAW MasterEx 79666 - 79816 -79914-36809 | 1 | |
| 79730 | SAW BLADE HSS BI-METAL 14 TPI 200 MM FOR SABRE SAW MasterEx 79666 - 79816 -79914-36809 | 1 | |
| 79776 | CARBIDE-TIPPED BLADE DIAMETER 180 MM FOR MasterEx 79760, 79199 and 79989 | 1 | |
| 79777 | DIAMOND BLADE FOR MasterEX 79760 | 1 | |
| 84405 | BLADE FOR WIRE CUTTER DRILL TYPE 60135 | 1 | |
| 84406 | BLADE FOR WIRE CUTTER DRILL TYPE 60136 | 1 | |
| 84407 | BLADE FOR WIRE CUTTER DRILL TYPE 60137 | 1 | |
| 84408 | BLADE FOR WIRE CUTTER DRILL TYPE 60138 | 1 | |
| 84409 | BLADE FOR WIRE CUTTER DRILL TYPE 60145 | 1 | |
| 84411 | BLADE FOR WIRE CUTTER DRILL TYPE 60147 | 1 | |
| 758305 | RAM AIR TURBINE (RAT) BLADE PROTECTIVE COVER (QTY 2) | 1 | |
| 760986 | LPC STG 1.5 RETAINER-BLADE LOCK | 1 | |
| 763485 | COVER, BLADE-RAT | 9 | |
| 764-531 | PROTECTOR - ADG BLADE | 9 | |
| 764531 | COVER, RAT BLADES | 9 | |
| 766824 | PROTECTION BLADE COVERS | 7 | |
| 847601 | BLADE, T1 | 1 | |
| 3012501 | 1º ST STAGE COMPRESSOR BLADES | 1 | |
| 5322121 | BLADE, FAN | 1 | |
| 6518217 | Protector Blade Angle | 1 | |
| 6796274 | COMP. BLADE REMOVAL SUPPORT | 1 | |
| 6796280 | GAGE- COMP BLADE END FACE CHECKING | 1 | |
| 6796344 | ADAPTER SET,GRINDING, COMPRESSOR ROTOR BLADE TIP | 1 | |
| 6796360 | PULLER - COMPRESSOR BLADE RETAINING PIN | 1 | |
| 6796586 | SUPPORT - COMPRESSOR WHEEL AND BLADE 1ST & 14TH | 1 | |
| 6796587 | SUPPORT - COMPRESSOR WHEEL AND BLADE 2ND THROUGH 13TH | 1 | |
| 6796786 | COMP. BLADE REWORK TEMPLATE | 1 | |
| 6796895 | 1ST STAGE COMP. BLADE RET. RING PRY BAR | 1 | |
| 6797183 | GAGE - COMP ROTOR BLADE O.D | 1 | |
| 6797184 | SUPPORT - COMP WHEEL BLADE | 1 | |
| 6797188 | ASSY FIXTURE - TURB ROTOR WHEEL & BLADE | 1 | |
| 6797191 | GAGE SET - TURB WHEEL BLADE | 1 | |
| 6798177 | SUPPORT - LEACH RACK, TURBINE BLADE (ALPAK) | 1 | |
| 6799627 | ASSY.FIXTURE TURB. WHEEL/BLADE | 2 | |
| 6872196 | PROBE – INSPECTION LIGHT, 1ST STAGE TURBINE BLADE COOLING AIR PASSAGE | 2 | |
| 7001467 | RAM AIR TURBINE (RAT) BLADE PROTECTIVE COVER | 1 | |
| 36989928 | MAIN ROTOR BLADE TAB BENDING TOOL | 1 | |
| 46000680 | BLADE ADAPTER | 1 | |
| 46223365 | FLAT-BLADED SCREWDRIVER, DRALL HANDLE WITH IMPACT CAP | 1 | |
| 46223520 | 4622/5 - 2,0X12X200MM - FLAT-BLADED SCREWDRIVER, DRALL HANDLE | 1 | |
| 72060200 | 10682.32 - 32mm WIDE BLADE PLASTIC SCRAPER | 1 | |
| 72060201 | 10682.19 - 19MM MED BLADE PLASTIC SCRAPER | 1 | |
| 72060202 | 10682.13 - 13mm NARROW BLADE PLASTIC SCRAPER | 1 | |
| 72060203 | 10682.32/45 - 32MM ANGLED BLADE PLASTIC SCRAPER (45deg) | 1 | |
| 72060204 | 10682.6 - 6MM POINTED BLADE PLASTIC SCRAPER | 1 | |
| 72313101 | 12749-2K.NEW-SCRAPER C/W REVERSIBLE BLADE | 1 | |
| 74240003 | PRECISION FEELER GAUGE 13 BLADES 2-35/1000" | 1 | |
| 76700-10251-041 | BLADE CLAMP | 1 | |
| 76700-20031-041 | BLADE HANDLER | 1 | |
| 76700‐20031‐041 | BLADE HANDLER | 1 | |
| 77020700 | 12187 VDE-VDE CABLE KNIFE STRAIGHT BLADE | 1 | |
| 77020701 | 12188 VDE-VDE CABLE KNIFE HOOKED BLADE | 1 | |
| 77592000 | 10758-2K - NEW-ROUND BLADE AWL - NEW | 1 | |
| 77592001 | 10758-175MM-ROUND BLADE AWL - NEW - 175mm | 1 | |
| 77593000 | 10757-2K - NEW-SQUARE BLADE AWL - NEW | 1 | |
| 77621003 | 12965-2-SNAP-OFF BLADE CUTTER | 1 | |
| 77621004 | 12965-3-SNAP-OFF BLADE CUTTER 18MM | 1 | |
| 79060001 | 10906-BODY FILE BLADE FINE | 1 | |
| 79060002 | 10907-BODY FILE BLADE MEDIUM | 1 | |
| 79060003 | 10908-BODY FILE BLADE COARSE | 1 | |
| 79060004 | 10921-SPARE BODY FILE BLADES | 1 | |
| 79060012 | 10915-BODY FILE BLADE MEDIUM ANGLE | 1 | |
| 79060013 | 10916-FILE BLADE COARSE ANGLED CUT | 1 | |
| 79180001 | 12050.R-SPARE HACKSAW BLADES (10 pack) | 1 | |
| 79180002 | 12053.R-SPARE HACKSAW BLADEs (6 pack) | 1 | |
| 79250001 | 12965.R-SPARE BLADES for universal kni | 1 | |
| 79250003 | REPLACEMENT BLADE FOR INSULATION STRIPPING KNIFE | 1 | |
| 79250010 | 12967R-REPLACEMENT BLADE | 1 | |
| 79251003 | 12965-2R-SPARE BLADES (10PC) | 1 | |
| 79251004 | 12965-3R-18MM SPARE BLADES SET | 1 | |
| 79270015 | 10356.R-REPLACEMENT BLADES FOR 10356 | 1 | |
| 79310001 | 12749.R-SPARE BLADE FOR 12749 | 1 | |
| 7C2554G01 | INSIDE DIA ECI SET - HPCR BLISK 1 BLADES | 1 | |
| 800-67-206-000 | MASTER BLADE | 1 | |
| 800-87-207-000 | MASTER BLADE | 1 | |
| 800Q017200 | STAGE 1 BLADE HOLDER | 1 | |
| 8077A | CRANKSHAFT HANGAR BLADE BUSHING R/I TOOL | 1 | |
| 8077B | CRANKSHAFT HANGER BLADE BUSHING REMOVAL/INSTALLATION TOOL | 1 | |
| 8110-R815505-0000 | MASTER BLADE | 1 | |
| 81101-R815505 | Master Blade | 1 | |
| 81101-R815505-0000 | MASTER BLADE | 1 | |
| 81101-R815505-0000, | MASTER BLADE | 1 | |
| 81105-R815505-0000 | MASTER BLADE | 1 | |
| 81105-R815505-0000, | MASTER BLADE | 1 | |
| 815526-1 | SUPPORT, AIRCRAFT PROPELLER BLADE | 1 | |
| 82-403-7 | 90° ANGLE BLADE | 1 | |
| 820596-1 | BLADE ROLLER | 1 | |
| 831016-1 | RETAINER, FAN BLADE | 1 | |
| 831017-1 | RETAINER, FAN BLADE | 1 | |
| 835-242-S5 | SOFTWARE SPREADSHEET FOR FINDING THE CORRECTED FAN BLADE TIP CLEARANCE MACHINING DEPTH OF CUT - OPTIONAL | 1 | |
| 83860017 | COVER, ADG BLADE | 2 | |
| 369029942 | MAIN ROTOR BLADE TRACKING TOOL | 1 | |
| 508136001 | KIT - SCOPE, BLENDING, HPC BLADES | 2 | |
| 537204511 | FAN BLADE REPAIR KIT | 1 | |
| 537220019 | STORAGE # CONTAINER FAN BLADE | 1 | |
| 537222030 | GAUGE-FAN BLADE REPAIR CF6-80 | 1 | |
| 697037611 | LOCK PLATE (PROP BLADE) | 1 | |
| 697070642 | LOCK PLATE (PROP BLADE) | 1 | |
| 700043742 | V2500 FAN BLADE LUBE STENCIL | 1 | |
| 7260223111 | HP3 BLADE | 1 | |
| 8000017300 | STAGE 2 BLADE HOLDER | 1 | |
| 8007885100 | TEMPLATE, CHECKING ASSEMBLY, FOR BLADE EROSION | 1 | |
| 8007959400 | BLADE EROSION INSPECTION GAUGE | 1 | |
| 8008720600 | STAGE 2 MASTER BLADE | 1 | |
| 8008720700 | STAGE 1MASTER BLADE | 1 | |
| 812639111074 | SAW BLADE | 1 | |
| 812639112060 | BANDSAW BLADE 12FT 16IN | 1 | |
| 812641411044 | SAW BLADE 11 | 1 | |
| 812641411060 | SAW BLADE 11 | 1 | |
| 812641413030 | BAND SAW BLADE | 1 | |
| 812641414100 | 14FT 10IN BAND SAW BLADE 1IN W | 1 | |
| 812641415060 | COBRA 3851 15FT 6IN BLADE | 1 | |
| 812647613060 | BANDSAW BLADE 13FT 6IN | 1 | |
| 812647615060 | BANSAW BLADE 15FT 6IN | 1 | |
| 815802616080 | COBRA BAND SAW BLADE | 1 | |
| 816069210104 | BAND SAW BLADE 10FT | 1 | |
| 818266301210 | BANDSAW BLADE | 1 | |
| 818271710060 | BAND SAW BLADE 3/8IN X.025 X10 | 1 | |
| 818327109090 | BANDSAW BLADE | 1 | |
| 818352310074 | BANDSAW BLADE | 1 | |
| 818380614080 | BLADE 3847-20-0.8-R-18 176IN | 1 | |
| 823661812000 | 1IN X 12FT X.035 4/6 BLADE | 1 | |
| 824002811000 | BLADE M42-27-0.9-6/10 11FT | 1 | |
| 829192112090 | BANDSAW BLADE | 1 | |
| 5120012541691 | GUIDE, BLADE BOX | 1 | |
| 844,910 | REPLACEMENT BLADES 9MM | 1 | |
| 844910 10 | REPLACEMENT BLADES 9MM | 1 | |
| 845,010 | REPLACEMENT BLADES 18MM | 1 | |
| 845010 10 | REPLACEMENT BLADES 18MM | 1 | |
| 846-501-900 | ADAPTER PULLER– FAN BLADES SHIM | 1 | |
| 850-091 | BLADE, SCALPEL | 1 | |
| 85612956G01 | FAN BLADE, RETAINING RING | 1 | |
| 856A 2384G01 | FIXTURE REMOVAL/INSTALLATION LPT. BLADES 1-5 | 1 | |
| 856A 3373G03 | FIXTURE, HOIST - LPT BLADED DISKS (HOIST FIXTURE) | 7 | |
| 856A1027 | FIXTURE, LIFT - COMPR ROTOR, STG 3 DISK & BLADES | 1 | |
| 856A1027 G01 | Lift Fixture - Compressor Rotor Stage 3 Disk and Blades | 10 | |
| 856A1027G01 | Fixture, Lift - C/R Stg 3 Disk and Blades (lift fixture) | 10 | |
| 856A1056G05 | VIBRATOR, COMPRESSOR ROTOR BLADES-RE | 8 | |
| 856A1058 | VIBRATOR-COMPR ROTOR BLADES, REMOVAL & INSTALL | 1 | |
| 856A1058G01 | VIBRATOR BLADES | 4 | |
| 856A1058G02 | VIBRATOR-COMPR ROTOR BLADES, | 5 | |
| 856A1074G02 | FIXTURE, CHILLING - HP TURBINE ROTOR BLADE RETAINER (OPTIONAL) (CHILLING FIXTURE) | 4 | |
| 856A1130G10 | FAN BLADE REMOVAL KIT CREATION | 25 | |
| 856A1132 | FIXTURE, RESTRAIN - HPTR BLADES (RESTRAIN FIXTURE) | 1 | |
| 856A1132G01 | FIXTURE, RESTRAIN-HPT ROTOR BLADES | 6 | |
| 856A1133 | TOOL BLADE REMOVAL | 1 | |
| 856A1133 P02 | Remover, Blade Retainer HPTR, Aft | 5 | |
| 856A1133P02 | REMOVER BLADE RETAINER HPTR AFT | 5 | |
| 856A1204G01 | FIXT REMOVE HPCR SPOOL BLADED | 10 | |
| 856A1212 | GAGE SET, HPCR BLADE LENGTH | 1 | |
| 856A1212 G01 | Fixture, Compressor Rotor Blade Length Gage | 1 | |
| 856A1212G09 | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 856A1212G10 | FIXTURE, COMPRESSOR ROTOR BLADE LENGTH GAGE | 1 | |
| 856A1212G11 | FIXTURE, COMPRESSOR ROTOR BLADE | 6 | |
| 856A1275 | GAGE, CORD LENGTH HPCR BLADE | 1 | |
| 856A1275G02 | GAUGE, BLADE TIP CHORD LENGTH | 1 | |
| 856A1275G04 | GAGE,LENGTH COMPRESSOR ROTOR BLADES | 6 | |
| 856A1276 | GAGE, EDGE THICKNESS, HPCR BLADE | 1 | |
| 856A1276G02 | Gage, Edge Thickness - Compressor Rotor Blades (edge gage thickness set) | 6 | |
| 856A1282 | TOOLSET,INSTL/REMV STG.1,2,3 COMP. ROTOR BLADES&RE | 1 | |
| 856A1282 REV C | TOOL SET, INSTL/REMOVE STG. 1,2,3 COMP. RTR BLADES & RETAIN | 1 | |
| 856A1299 | FIXTURE,BLADE REMOVAL | 1 | |
| 856A1299G02 | FIXTURE BLADE REMOVAL HPTR | 2 | |
| 856A1310G01 | HPT BLADES BORESCOPE GUIDE TUBE | 19 | |
| 856A1402G02 | FIXTURE, RESTRAINING - HP TURBINE ROTOR BLADES | 1 | |
| 856A1411 | FIXTURE, PUSH / PULL - HP TURB ROTOR, AFT, BLADE RETAINER | 1 | |
| 856A1411G01 | FIXTURE, PUSH / PULL - HP TURB ROTOR, AFT, BLADE RETAINER | 1 | |
| 856A1411G02 | FIXTURE, PUSH / PULL - HP TURB ROTOR, AFT, BLADE RETAINER | 1 | |
| 856A1411G03 | FIXTURE, PUSH / PULL - HP TURB ROTOR, AFT, BLADE RETAINER | 1 | |
| 856A1411G04 | FIXTURE, PUSH/PULL - HPTR AFT BLADE RETAINER (PUSH/PULL FIXTURE) | 4 | |
| 856A1411G04 | FIXTURE, PUSH/PULL - HPT ROTOR AFT BLADE | 4 | |
| 856A1411G05 | FIXTURE, PUSH/PULL-HPTR, AFT, BLADE, | 7 | |
| 856A1437G01 | Fixture, Blade Removal | 1 | |
| 856A1437G02 | FIXTURE, BLADE REMOVAL | 1 | |
| 856A1442G02 | FIXTURE, CHILL - HIGH PRESSURE TURBINE ROTOR AFT BLADE RETAINER | 2 | |
| 856A1445G01 | Retainer, Slave Blade | 2 | |
| 856A1456 | REMOVE TOOL, HPTR BLADE | 1 | |
| 856A1456G02 | TOOL SET REMOVE HPTR BLADE & | 5 | |
| 856A1511G02 | PROGRAM, BALANCE - BLADE INSTALLATION AND REPLACEMENT | 1 | |
| 856A1600 | RETAINER, SLAVE BLADE- H P TURB ROTOR | 1 | |
| 856A1600G01 | Retainer, Slave Blade - HP Turbine Rotor (blade retainer) | 5 | |
| 856A1602G01 | Fixture, Chill - HPTR Aft Blade Retainer (chill fixture) | 6 | |
| 856A1603G07 | RETAINER, SLAVE BLADE | 2 | |
| 856A1641G01 | FIXTURE, FLUSH-COOLING HOLES, HPTR BLADES | 1 | |
| 856A1655 | GRINDER, BLADE TIP - HP COMPR ROTOR STG 1 - 9 | 1 | |
| 856A1655G02 | GRINDER, BLADE TIP-HPCR STG 1-9 | 1 | |
| 856A1655G03 | GRINDER, BLADE TIP-HPCR STG 1-9 | 1 | |
| 856A1655G04 | GRINDER, BLADE TIP-HPCR STG 1-9 | 2 | |
| 856A1655G05 | GRINDER, BLADE TIP - HPCR STG 1-9 | 1 | |
| 856A1809G01 | Gage Cord Length HPCR Blade | 5 | |
| 856A180PG01 | CFM56-7 BLADE CHORD GAGE | 1 | |
| 856A1814G01 | Gage, Edge Thickness - Compressor Rotor Blades (edge gage thickness set) | 8 | |
| 856A1832G01 | PULLER FAN BLADE SPACERS | 4 | |
| 856A1868G03 | FIXTURE, INSTALL/ REMOVE-HP TURB ROTOR FWD OUTER SEAL (76 BLADE ROTORS) | 3 | |
| 856A1869 | FIXTURE, PUSH/PULL - HP TURB ROTOR, AFT, BLADE RETAINER | 1 | |
| 856A1869G01 | Fixture, Push/Pull - HP Turbine Rotor Aft Blade Retainer (push/pull fixture) | 9 | |
| 856A1870G01 | RETAINER, SLAVE-AFT HPTR BLADE (5BE & | 7 | |
| 856A1884 | HPCR BLADE ROTATION DEVICE | 1 | |
| 856A1884G01 | HPCR BLADE ROTATION DEVICE | 3 | |
| 856A1885G01 | RETAINER, SLAVE BLADE - HPT ROTOR | 3 | |
| 856A2201G02 | ADAPTER SET, VIBRATOR-COMPR ROTOR BLADES | 1 | |
| 856A2379G01 | STAGE 1 FAN BLADE SPACER REMOVAL TOOL | 7 | |
| 856A2384G01 | FIXTURE REMOVAL/ INSTAL LPT BLADES 1-5 | 1 | |
| 856A2405G01 | LEADING EDGE GAGE - FAN BLADE | 1 | |
| 856A2405G02 | Gauge, Leading Edge of Fan Blade | 1 | |
| 856A2413G01 | TEMPLATE - LEADING EDGE FAN BLADE | 2 | |
| 856A2427G01 | COUNTERWEIGHT FIXTURE - FAN BLADE | 1 | |
| 856A2510 | FAN BLADE STORAGE RACK | 1 | |
| 856A2630 | FIXT. CHECK FAN BLADE | 1 | |
| 856A2630G01 | FAN BLADE LE CHECKER | 1 | |
| 856A2631 | STAND,STORAGE-FAN BLADES | 1 | |
| 856A2631G01 | Stand, Storage - Fan Blades (storage stand) | 11 | |
| 856A2631 | STAND,STORAGE-FAN BLADES | 1 | |
| 856A2656 | FAN-BLADES PLOTTING MULTI CFM56 | 1 | |
| 856A2656G03 | Fan Blade Plotting | 2 | |
| 856A2656G04 | Fan Blade Plotting | 1 | |
| 856A2676 | GAP GAUGE FOR VANE/BLADE | 1 | |
| 856A2678P02 | CFMi SOFTWARE FOR BLADES MAPPING | 2 | |
| 856A2682G01 | ECI KIT - FAN BLADE | 2 | |
| 856A2682G02 | ECI KIT - FAN BLADE | 1 | |
| 856A2691G01 | 856A2691G01 - Fan Blade Spacer Pliers | 26 | |
| 856A2691G02 | FAN BLADE SPACER PLIERS | 2 | |
| 856A2694G01 | PULLER ADAPTER - FAN BLADE SPACERS | 4 | |
| 856A2700 | ADAPTER,PULLER-FAN BLADE SPACERS | 2 | |
| 856A2700 G01 | Puller Adapter - Fan Blade Spacers | 13 | |
| 856A2700G01 | PULLER FAN BLADE | 13 | |
| 856A2701G01 | PULLER ADAPTER - FAN BLADE SPACERS | 1 | |
| 856A2750 | FIXTURE, LPT BLADES STG 1 THRU 2 | 1 | |
| 856A2750G01 | FIXTURE LPT BLADES 1 | 1 | |
| 856A2750G02 | FIXTURE - LPT BLADES STG 1/4 | 5 | |
| 856A2770G01 | ADAPTOR PULLER FAN BLADE | 1 | |
| 856A2791G01 | CFM56 FAN BLADE PULLER TOOL | 10 | |
| 856A2802 | TEMPLATE CHECKING FAN BLADE LEADING EDGE | 1 | |
| 856A2802G01 | TEMPLATE FAN CHECKING FAN BLADE LEADING EDGE | 1 | |
| 856A2802G02 | Template Fan Blade | 1 | |
| 856A2907 | CUTTING BLADE | 1 | |
| 856A2947G01 | Contour Template (Fan Blade) | 1 | |
| 856A2948 | PRESSURE TOOL,INFLATION FAN BLADES (220V/50HZ) | 1 | |
| 856A2949 | TEMPLATE, CHECKING - FAN BLADE LEADING EDGE | 1 | |
| 856A2949G01 | EXTRACTOR FAN BLADE LEADING EDGE | 1 | |
| 856A2949G02 | Template checking fan blade | 1 | |
| 856A2951G01 | COUNTERWEIGHT FIXTURE - FAN BLADE | 2 | |
| 856A2954 | PULLER FAN BLADES SPACERS | 1 | |
| 856A2954 G01 | Puller - Fan Blade Spacers | 16 | |
| 856A2954G | Puller-Spacers,Fan blade | 1 | |
| 856A2954G01 | PULLER-SPACERS,FAN BLADE | 16 | |
| 856A2954G02 | PULLER - FAN BLADE SPACERS | 3 | |
| 856A2956 | TOOL - ASSISTANCE, FAN BLADE, RETAINING RING | 2 | |
| 856A2956G01 | Tool - Assistance, Fan Blade, Retaining Ring | 16 | |
| 856A2956G01 FAS | CFM56 FAN BLADE RETAINING RING | 2 | |
| 856A2956P04 | BOLT PULLER – SPACERS FAN BLADE | 3 | |
| 856A2956P04 | BOLT (PULLER – SPACERS FAN BLADE) | 3 | |
| 856A3042 | PLATE, RETENTION - BLADES, FAN ROTOR BALANCING (RETENTION PLATE) | 1 | |
| 856A3131G01 | FIXTURE, HOIST - LPT BLADED DISKS | 5 | |
| 856A3312G01 | Balancing Shaft - Bladed Fan Disc | 1 | |
| 856A3373 | FIXTURE, HOIST.LPT BLADED DISKS | 1 | |
| 856A3373 G01 | Fixture Hoist ‐ LPT Bladed Disks | 6 | |
| 856A3373G01 | FIXTURE, HOIST - LPT BLADED DISKS (HOIST FIXTURE) | 6 | |
| 856A3373G02 | LIFTING FIXTURE, LPT BLADED | 1 | |
| 856A3373G03 | LIFTING FIXTURE - LPT BLADED DISKS | 7 | |
| 856A3373G03 | LIFTING FIXTURE, LPT BLADED | 7 | |
| 856A3373G04 | FIXTURE, HOIST - LPT BLADED DISKS | 1 | |
| 856A33782G02 | WRENCH - FAN BLADE, RETAINER RING, REMOVAL | 1 | |
| 856A3385P03 | WRENCH, HOIST - LPT BLADED DISKS | 7 | |
| 856A3426 | ASSY/DISASSY FIXTURE - LPT BLADES STG 1/4 | 1 | |
| 856A3426 G01 | Fixture Assembly/ Disassembly ‐ LPT Blades | 5 | |
| 856A3426G01 | ASSY/DISASSY FIXTURE - LPT BLADES STG 1/4 | 5 | |
| 856A3434G01 | TOOL, MOMENT WEIGHT BOOSTER BLADES | 1 | |
| 856A3435G01 | ADAPTER, BLADE ROOT | 3 | |
| 856A3458G01 | BASEPLATE - STATIC LPT BLADED DISKS BA | 1 | |
| 856A3480G01 | FIXTURE, PUSH/PULL - HPT ROTOR, AFT, BLADE RETNR | 6 | |
| 856A3480G01 | FIXTURE, PUSH/PULL - HPT ROTOR, AFT, BLADE RETNR | 6 | |
| 856A3492G07 | MAPPING SOFTWARE - FAN/BOOSTER/LPT BLADES | 1 | |
| 856A3500 | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500 G01 | Adapter Puller ‐ Fan Blade Spacers | 17 | |
| 856A3500 REV A | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500G01 | ADAPTER, PULLER FAN BLADE SPACER | 17 | |
| 856A3500P02 | ADAPT- FAN BLADE PULLER | 2 | |
| 856A3503G01 | FAN BLADES PLOTTING MULTI CFM56 | 3 | |
| 856A3518G01 | STORAGE STAND - FAN BLADES | 3 | |
| 856A3582G01 | WRENCH, LPC AFT BLADE RETAINER AND FORWARD ROTATING AIR SEAL | 3 | |
| 856A3584G01 | CONTAINER, SHIPPING-38 FAN BLADES | 1 | |
| 856A3586G01 | CONTAINER SHIPPING FAN BLADES | 1 | |
| 856A3602G02 | Template, Fan Blade | 1 | |
| 856A3622 | TEMPLATE FAN BLADE LEADING | 1 | |
| 856A3622G01 | CHECK FAN BLADE LEADING EDGE | 1 | |
| 856A3622G02 | TEMPLATE FAN BLADE C | 1 | |
| 856A3622G03 | FANBLADE TEMPLATE | 7 | |
| 856A3629 | GAUGE INSPECTION BLADE MIDSPAN SHROUD AREA | 1 | |
| 856A3629P02 | FANBLADE M/SPAN TIP GAUGE | 11 | |
| 856A3630 | PRESSURE TOOL INFLATABLE FAN BLADES INNER PATCH (220V) | 1 | |
| 856A3684G01 | Fan Blade | 1 | |
| 856A3707 | PULLER FAN BLADE SPACERS. | 1 | |
| 856A3707G01 | Fan Blade Spacers | 3 | |
| 856A3707G02 | PULLER - SPACERS , FAN BLADE | 1 | |
| 856A3707G03 | PULLER - SPACERS , FAN BLADE | 1 | |
| 856A3707G04 | Puller, Fan Blades | 1 | |
| 856A3707G05 | Adaptor, Puller Fan Blade Spacer | 11 | |
| 856A3707G05 | PULLER - FAN BLADE SPACER | 11 | |
| 856A3707G05-BLOCK | BLOCK - CFM56-7 FAN BLADE SPACER PULLER | 1 | |
| 856A3707G05-KIT | PULLER - FAN BLADE SPACER - KIT | 1 | |
| 856A3707G05-PIN | PIN - CFM56-7 FAN BLADE SPACER PULLER | 1 | |
| 856A3707G06 | PULLER-FAN BLADE SPA | 9 | |
| 856A3707G06 | PULLER - FAN BLADE SPACER | 9 | |
| 856A3707G07 | PULLER - FAN BLADE SPACERS | 9 | |
| 856A3707G07 | PULLER - FAN BLADE SPACER | 9 | |
| 856A3707G08 | PULLER, FAN BLADE SPACER | 14 | |
| 856A3707P15 | FAN BLADE PULLER | 4 | |
| 856A3707P16 | Puller, Fan Blade Spacer | 6 | |
| 856A3707P17 | Puller, Fan Blade Spacer | 8 | |
| 856A3707P18 | Puller, Fan Blade Spacer | 4 | |
| 856A3707P22 | PULLER FAN BLADE SPACER | 2 | |
| 856A3707P23 | PIN, FAN BLADE SPACER | 1 | |
| 856A3707P23 | PIN, FAN BLADE SPACER | 1 | |
| 856A3707P24 | PIN, FAN BLADE SPACER | 1 | |
| 856A3707P24 | PIN, FAN BLADE SPACER | 1 | |
| 856A3707P25 | PIN, FAN BLADE SPACER | 1 | |
| 856A3707P27 | PIN-FAN BLADE SPACER PULLER | 3 | |
| 856A3707P28 | PIN-FAN BLADE SPACER PULLER | 4 | |
| 856A3707P28 | PIN-FAN BLADE SPACER PULLER | 4 | |
| 856A3707P29 | PIN-FAN BLADE SPACER PULLER | 3 | |
| 856A3707P29 | PIN-FAN BLADE SPACER PULLER | 3 | |
| 856A3719 | STAND - STORE - FAN BLADES | 1 | |
| 856A3719G01 | Stand Store Fan Blades | 1 | |
| 856A3719G02 | STORAGE STAND - FAN BLADES | 4 | |
| 856A3719G03 | STORAGE STAND - FAN BLADES | 2 | |
| 856A3770 | CFMI SOFTWARE FOR BLADE MAPPING | 1 | |
| 856A3770G01 | Fan & Booster Blades Plotting Program | 1 | |
| 856A3770P02 | CFMI SOFTWARE FOR BLADE MAPPING | 1 | |
| 856A3770P03 | MAPPING SOFWARE FAN/BOOSTER/LPT/BLADES | 2 | |
| 856A3770P05 | MAPPING SOFTWARE - FAN/BOOSTER/LPT BLADES | 1 | |
| 856A3771 | FAN BLADE TEMPLATE | 1 | |
| 856A3771G01 | Template Fan Blade Leading Edge | 4 | |
| 856A3778P03 | FAN BLADE REMOVAL KIT CREATION | 1 | |
| 856A3778P04 | FAN BLADE REMOVAL KIT CREATION | 1 | |
| 856A3779 | PULLER PLATFORMS, FAN BLADE | 1 | |
| 856A3779 G02 | FAN BLADES PLATFORMS PULLER | 25 | |
| 856A3779G01 | FAN BLADE PLATFORM PULLER - CFM56-7 | 11 | |
| 856A3779G01 | PULLER - PLATFORMS FAN BLADE | 11 | |
| 856A3779G01 FAS | CFM56 FAN BLADE SPACER PULLER | 1 | |
| 856A3779G01L0C | PULLER PLATFORM - FAN BLADE | 1 | |
| 856A3779G02 | Puller Platform Fan Blade | 25 | |
| 856A3779G02 | PULLER - PLATFORMS FAN BLADE | 25 | |
| 856A3779GO2 | FAN BLADE PLATFORM PULLER | 25 | |
| 856A3779P03 | PULLER PLATFORM FANBLADES | 1 | |
| 856A3782 | WRENCH, REMOVE FAN BLADE RETAINER RING | 1 | |
| 856A3782G01 | Wrench, I/R Fan Blade Retainer Ring | 6 | |
| 856A3782G02 | Wrench-FanBlade,RetainerRing,Removal | 27 | |
| 856A3782G02 | WRENCH - REMOVAL FAN BLADE, RETAIRNER RING | 27 | |
| 856A3782G02 FAS | CFM56 FAN BLADE RET. RING WRENCH | 1 | |
| 856A3782G02 FAS | CFM56 FAN BLADE RET. RING WRENCH | 1 | |
| 856A3782G08 | PULLER - FAN BLADE SPACERS | 1 | |
| 856A3905 | PULLER - FAN BLADE SPACER | 1 | |
| 856A3905G01 | PULLER SPACERS FAN BLADE | 4 | |
| 856A3905G02 | PULLER FAN BLADE | 7 | |
| 856A3905G02 | PULLER SPACERS FAN BLADE | 7 | |
| 856A3905G03 | PULLER - FAN BLADE SPACER | 6 | |
| 856A3905G03 | PULLER SPACERS FAN BLADE | 6 | |
| 856A3923 | PULLER FAN BLADE SPACER LINE | 1 | |
| 856A3923G01 | PULLER FAN BLADE SPACER LINE | 4 | |
| 856A3923G02 | PULLER FAN BLADE SPACER LINE | 2 | |
| 856A3923G03 | PULLER-FAN BLADE SPACER LINE | 2 | |
| 856A3927G02 | FAN BLADE REMOVAL KIT CREATION | 1 | |
| 856A3947 | PULLER FAN BLADE SPACERS | 1 | |
| 856A3947G01 | PULLER FAN BLADE SPACERS | 9 | |
| 856A3947G01 | FAN BLADE SPACERS PULLER | 9 | |
| 856A3947G02 | PULLER FAN BLADE SPACERS | 10 | |
| 856A3947G02 | FAN BLADE SPACERS PULLER | 10 | |
| 856A3947P11 | FAN BLADE REMOVAL KIT CREATION | 2 | |
| 856A3948 | PULLER FAN BLADE SPACERS | 1 | |
| 856A3948G01 | Puller – Fan Blade Spacers | 3 | |
| 856A3948G02 | CLAMP - FAN BLADE SPACERS | 5 | |
| 856A3955 | GAGE BUCKLING CHECK LPT BLADES, STAGE 1 TO 4 | 1 | |
| 856A3955G01 | BUCKLING CHECKING GAGE - LPT BLADES STG 1/4 | 1 | |
| 856A3955G02 | BUCKLING CHECKING GAGE - LPT BLADES STG 1/4 | 2 | |
| 856A3958G01 | ZONING TOOL, ROOT RADIUS - FAN BLADE | 2 | |
| 856A3958G02 | ZONING TOOL, ROOT RADIUS - FAN BLADE | 1 | |
| 856A3974G02 | FAN BLADE SPACERS PULLER | 1 | |
| 856A4003G01 | STAND, BACKFLUSH - HPT BLADES | 1 | |
| 856A4005G02 | FIXTURE, WATER FLOW -HPT BLADE | 1 | |
| 856A4008 | SEAL, BACKFLUSH – HPT BLADE | 1 | |
| 856A4008G01 | SEAL, BACKFLUSH – HPT BLADE | 1 | |
| 856A4008P04 | SEAL, BACKFLUSH - HPT BLADE | 1 | |
| 856A4008P05 | SEAL, BACKFLUSH - HPT BLADE | 1 | |
| 856A4055 | Grinder Blade Tip HP Compr Rotor Stg 1-9 | 3 | |
| 856A4055 G10, G11 & G12 | BLADE TIP GRINDER-HP COMPRESSOR ROTOR, STA GE 1-9 | 1 | |
| 856A4055 G15 | THE GRINDER IS USED TO GRIND THE BLADE TIPS OF INDIVIDUAL COMPRESSOR BLADES. | 3 | |
| 856A4055 REV AB | GRINDER, BLADE TIP-HP COMPR. ROTOR STG. 1-9 | 1 | |
| 856A4055G01 | GRINDER, BLADE | 1 | |
| 856A4055G02 | GRINDER, BLADE | 1 | |
| 856A4055G03 | GRINDER, BLADE | 1 | |
| 856A4055G04 | GRINDER, BLADE | 1 | |
| 856A4055G05 | GRINDER, BLADE | 1 | |
| 856A4055G06 | GRINDER, BLADE | 1 | |
| 856A4055G07 | GRINDER, BLADE | 1 | |
| 856A4055G08 | GRINDER, BLADE | 1 | |
| 856A4055G09 | GRINDER, BLADE | 1 | |
| 856A4055G10 | Blade Tip Grinder Assy | 4 | |
| 856A4055G101112 | BLADE TIP GRINDER COMBINED ASSY | 1 | |
| 856A4055G11 | Blade Tip Grinder Assy | 3 | |
| 856A4055G12 | GRINDER-BLADE TIP | 9 | |
| 856A4055G13 | HPC ROTOR STG.1-9 BLADE TIP GRINDER | 2 | |
| 856A4055G14 | GRINDER, BLADE TIP-HPCR STG 1-9 | 2 | |
| 856A4055G15 | GRINDER, BLADE TIP-HPCR STG 1-9 | 3 | |
| 856A4055G16 | GRINDER, BLADE TIP-HPCR STG 1-9 | 2 | |
| 856A4109G01 | RACK, ROTATING - CLEAN HPT BLADE | 1 | |
| 856A4110G01 | SHIELD, WATERFLOW - BLADE HPTR (WATERFLOW SHIELD) NOT ESSENTIAL TO START | 1 | |
| 856A4185G01 | FIXTURE, WATERFLOW - HPT BLADES (WATERFLOW FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A4192G01 | GAGE, MID-CHORD LENGTH COMPRESSOR ROTOR BLADE | 2 | |
| 856A4219G01 | FIXTURE, SHOTPEEN - HPT BLADE DOVETAIL (SHOTPEEN FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A4219G02 | FIXTURE, SHOTPEEN - HPT BLADE DOVETAIL (SHOTPEEN FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A4600 G01 | Master Blade LPT Stage 1 | 2 | |
| 856A4600G01 | MASTER - LPT STG 1 BLADE | 2 | |
| 856A4600G02 | MASTER - LPT STG 1 BLADE | 2 | |
| 856A4600G03 | MASTER - LPT STG 1 BLADE | 1 | |
| 856A4601 G01 | Master Blade LPT Stage 2 | 2 | |
| 856A4601G01 | MASTER - LPT STG 2 BLADE | 2 | |
| 856A4602G01 | MASTER - LPT STG 3 BLADE | 2 | |
| 856A4604G01 | FIXTURE, CHECKING - LPT STAGE 1 BLADE NOT ESSENTIAL TO START | 1 | |
| 856A4604G02 | FIXTURE, CHECKING - LPT STAGE 1 BLADE | 1 | |
| 856A4605G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE | 2 | |
| 856A4606G01 | FIXTURE, CHECKING - LPT STAGE 3 BLADE | 2 | |
| 856A4608 | DISKETTE FOR STAGE 1-4 LPT BLADES CHECK | 1 | |
| 856A4608G01 | DISKETTE (MM) FOR STAGE 1-4 LPT BLADES CHECK NOT ESSENTIAL TO START | 1 | |
| 856A4608G02 | DISKETTE (MM) FOR STAGE 1-4 LPT BLADES CHECK NOT ESSENTIAL TO START | 1 | |
| 856A4608G05 | DIM INSP DATA PROGRAM DISK - LPT BLADES STG 1/4 | 1 | |
| 856A4608G06 | DIM INSP DATA PROGRAM DISK - LPT BLADES STG 1/4 | 1 | |
| 856A4610 | DIM INSP MASTER - FAN BLADE | 1 | |
| 856A4610G01 | DIM INSP MASTER - FAN BLADE | 1 | |
| 856A4611 | FIXTURE CHECKING FAN BLADE | 1 | |
| 856A4611G01 | DIM INSP FIXTURE - FAN BLADE | 1 | |
| 856A4611G02 | DIM INSP FIXTURE - FAN BLADE | 1 | |
| 856A4612 | DIM INSP PROGRAM DATA DISK - FAN BLADE | 1 | |
| 856A4612G03 | DIM INSP PROGRAM DATA DISK - FAN BLADE | 1 | |
| 856A4612G04 | DIM INSP PROGRAM DATA DISK - FAN BLADE | 1 | |
| 856A4617 | (RT) TEMP. FAN BLADE LDG EDGE | 1 | |
| 856A4617G01 | Template - Fan Blade Leading Edge and Trailing Edge | 1 | |
| 856A4617G02 | L/T EDGE CHECKING TEMPLATE - FAN BLADE | 1 | |
| 856A4625G01 | LEADING EDGE CONTOUR FAN BLADE | 1 | |
| 856A4625G02 | LEADING EDGE CONTOUR FAN BLADE | 1 | |
| 856A4628 | VISUAL INSPECTION KIT - FAN BLADE ROOT | 1 | |
| 856A4628G01 | Tool-Inspection,pressure faces,dovtail,Fan blade,missing coating, inch units only | 9 | |
| 856A4628G02 | TEMPLATE-FAN BLADE | 8 | |
| 856A4628G02 | TOOL CHECK COATING FAN BLADE ROOT | 8 | |
| 856A4633G02 | FAN BLADE REMOVAL KIT CREATION | 13 | |
| 856A4637G01 | GAUGE - FAN BLADE REAR SHANK | 10 | |
| 856A4638 | GAGE, BUCKLING CHECK - LPT BLADES 1-4 | 1 | |
| 856A4638G01 | BUCKLING CHECKING GAGE - LPT BLADES STG 1/4 | 1 | |
| 856A4639 | BLADE TIP CLEARANCE | 1 | |
| 856A4639G02 | TOOL MEASUREMENT FAN BLADE TIP CLEARANCE | 1 | |
| 856A4639G06 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 2 | |
| 856A4639G07 | TOOL, MEASUREMENT - FAN BLADE TIP CLEARANCE (CHECKING TOOL) | 1 | |
| 856A4639G08 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 2 | |
| 856A4639G09 | TOOL, MEASUREMENT - FAN BLADE TIP CLEARANCE (CHECKING TOOL) | 1 | |
| 856A4639G10 | TOOL, MEASUREMENT - FAN BLADE TIP CLEARANCE (CHECKING TOOL) | 2 | |
| 856A4640G01 | FAN BLADE REMOVAL KIT CREATION | 7 | |
| 856A4640G02 | LEVER ARM-FAN BLADE SPACERS | 1 | |
| 856A4646 | FAN BLADE REAR SHANK WEAR INSPECTION TOOL | 1 | |
| 856A4646G0 | FAN BLADE REAR SHANK WEAR INSPECTION TOOL | 1 | |
| 856A4646G01 | GAUGE - FAN BLADE REAR SHANK | 8 | |
| 856A4646G01 | FAN BLADE REAR SHANK WEAR INSPECTION TOOL | 8 | |
| 856A4646G02 | FAN BLADE REAR SHANK WEAR INSPECTION TOOL | 1 | |
| 856A4705G01 | KIT,ULTRASONIC INSPECTION Â ROOT FAN BLADE | 1 | |
| 856A4705G02 | KIT,ULTRASONIC INSPECTION - ROOT FAN BLADE | 1 | |
| 856A4706G01 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A4706G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A5500 | MASTER FAN BLADE | 1 | |
| 856A5500G03 | MASTER - FAN BLADE | 1 | |
| 856A5501G01 | Blade Master | 1 | |
| 856A5501G04 | MASTER - LPT STG 1 BLADE | 2 | |
| 856A5502G01 | Blade Master | 1 | |
| 856A5502G04 | MASTER - LPT STG 2 BLADE | 2 | |
| 856A5503G01 | Blade Master | 1 | |
| 856A5503G06 | MASTER - LPT STG 3 BLADE | 2 | |
| 856A5504G01 | Blade Master | 1 | |
| 856A5504G05 | MASTER - LPT STG 4 BLADE | 2 | |
| 856A5505G04 | STAGE 1 LPT BLADE (OLD CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5505G06 | STAGE 1 LPT BLADE (NEW CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5505G07 | STAGE 1 LPT BLADE (NEW CONFIGURATION) (CHECKING FIXTURE) | 1 | |
| 856A5506G04 | STAGE 2 LPT BLADE (CHECKING FIXTURE) | 1 | |
| 856A5506G05 | FIXTURE, CHECKING-BLADE STG 2, LPT | 1 | |
| 856A5507G04 | CHECKING FIXTURE - LPT BLADES STG 3 | 2 | |
| 856A5507G05 | CHECKING FIXTURE - LPT BLADES STG 3 | 1 | |
| 856A5508G04 | FIXTURE CHECKING STAGE 4 LPT BLADE | 2 | |
| 856A5508G06 | FIXTURE, CHECKING - BLADE STAGE 4 | 1 | |
| 856A5513G05 | FIXTURE, GRIND OR CHECK – STAGE 1 LPT BLADE CONCAVE SIDE (CONFIGS. 2 AND 3) | 2 | |
| 856A5513G06 | FIXTURE GRIND OR CHECK CONCAVE SIDE LPT BLADE STAGE 1 | 4 | |
| 856A5517G07 | FIXT,GRIND,CONCAVE LPT BLADE,STG3 | 2 | |
| 856A5518 | GRINDING FIXTURE - LPT BLADE STG 4 CONVEX SIDE | 1 | |
| 856A5518G05 | GRINDING FIXTURE - LPT BLADE STG 4 | 1 | |
| 856A5519G03 | FIXTURE, GRIND OR CHECK CONCAVE SIDE LPT BLADE STG 4 | 1 | |
| 856A5519G04 | FIXT,GRIND/CHECK, LPT BLADES STG3 | 1 | |
| 856A5522G01 | GAGE - NOTCH LPT BLADES STG1-4 | 4 | |
| 856A5522G02 | GAGE NOTCH BLADE TIP LPT STAGE 1-4 | 1 | |
| 856A5523G01 | DIAL INDICATOR SUPPORT - LPT BLADES | 2 | |
| 856A5523G02 | SUPPORT DIAL INDICTOR STAGE 1-4 LPT BLADES | 1 | |
| 856A5556G01 | STAGE 1-4 LPT BLADE TWIST ANGLE CHECK (CONF.2 AND 3) (HOLDING FIXTURE) | 1 | |
| 856A5556G02 | FIXTURE HOLDING TWIST ANGLE CHECK LPT BLADES STAGE 1-4 | 3 | |
| 856A5557P02 | TOOL, LEADING EDGE CONTOUR OF FAN BLADE | 1 | |
| 856A5562 | FIXTURE, BUCKLING CHECK - LPT BLADES STAGES 1-4 | 1 | |
| 856A5562G02 | BUCKLING INSPECTION GAGE - LPT BLADES STG1/4 | 3 | |
| 856A5569G01 | TIP NOTCH GRINDING FIXTURE - FAN BLADE | 1 | |
| 856A5571G02 | TIP NOTCH CHECK TOOL SET - FAN BLADE | 1 | |
| 856A5574G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5590G01 | GAGE BOW CHECK LPT BLADES STAGES 1-4 | 1 | |
| 856A5590G02 | MEASUREMENT COMPUTER ENGINE BLADES | 1 | |
| 856A5590G05 | COMPUTER MEASUREMENT ENGINE BLADE DIM CHARACTERISTICS | 1 | |
| 856A5612G03 | MEASUREMENT COMPUTER ENGINE BLADES MM UNIT WITH PEDAL | 1 | |
| 856A5612G08 | CASSETTE KIT TO CHECK STG 1-4 LPT BLADES (OLD CONFIGURATION) | 1 | |
| 856A5621G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5631G01 | TIP MILLING FIXTURE - BOOSTER BLADE | 1 | |
| 856A5648G02 | CASSETTES KIT TO CHECK STG1-4 LPT BLADES – MM UNIT (NEW CONFIGURATION) (CASSETTES KIT) | 1 | |
| 856A5648G04 | PROGRAM DATA CASSETTES TO CHECK STAGE 1-4 LPT BLADES | 1 | |
| 856A5654 | MEASUREMENT COMPUTER - ENGINE BLADES | 1 | |
| 856A5654G02 | MEASUREMENT COMPUTER - ENGINE BLADES (COMPUTER) | 1 | |
| 856A5654G03 | MEASUREMENT COMPUTER FAN BLADE, S-1 LPT BLADE | 1 | |
| 856A5654G07 | MEASUREMENT COMPUTER – ENGINE BLADES | 1 | |
| 856A5663G02 | 3-1/2 DISK PROGRAM DATA TO CHECK STAGE 1-4 LPT BLADES | 1 | |
| 856A5664G04 | 3 1/2 DISK PROGRAM DATA TO CHECK STAGE 1-4 LPT BLADES | 1 | |
| 856A5700G01 | DIM INSP MASTER - LPT BLADE STG 1 | 1 | |
| 856A5700G02 | DIM INSP MASTER - LPT BLADE STG 1 | 1 | |
| 856A5701G01 | DIM INSP MASTER - LPT BLADE STG 2 | 1 | |
| 856A5701G02 | DIM INSP MASTER - LPT BLADE STG 2 | 1 | |
| 856A5702G01 | DIM INSP MASTER - LPT BLADE STG 3 | 1 | |
| 856A5702G03 | DIM INSP MASTER - LPT BLADE STG 3 | 1 | |
| 856A5703G01 | DIM INSP MASTER - LPT BLADE STG 4 | 1 | |
| 856A5704 G01 | Master- Blade LPT STG 5 | 1 | |
| 856A5704G01 | DIM INSP MASTER - LPT BLADE STG 5 | 1 | |
| 856A5705G01 | DIM INSP FIXTURE - LPT BLADE STG 1 | 1 | |
| 856A5705G02 | DIM INSP FIXTURE - LPT BLADE STG 1 | 1 | |
| 856A5706G01 | DIM INSP FIXTURE - LPT BLADE STG 2 | 1 | |
| 856A5706G02 | DIM INSP FIXTURE - LPT BLADE STG 2 | 1 | |
| 856A5707G01 | DIM INSP FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A5707G02 | DIM INSP FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A5708G01 | DIM INSP FIXTURE - LPT BLADE STG 4 | 1 | |
| 856A5709G01 | DIM INSP FIXTURE - LPT BLADE STG 5 | 1 | |
| 856A5711G03 | BUCKLE CHECKING GAGE - LPT BLADES | 1 | |
| 856A5782G02 | WRENCH-FAN BLADE,RETAINING RING | 1 | |
| 856A5787G03 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A5810G01 | MASTER - FAN BLADE | 1 | |
| 856A5811G01 | MID SPAN RADIUS EMPLATE - FAN BLADE | 1 | |
| 856A5816G01 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 1 | |
| 856A5817 | TOOL,CHECK-FAN BLADE SHANK | 2 | |
| 856A5817G01 | FAN BLADE SHANK CHECK TOOL | 12 | |
| 856A5817G01 | CHECK FANBLADE SHANK MEASURE | 12 | |
| 856A5817G02 | SHANK CHECKING GAGE - FAN BLADE | 1 | |
| 856A5900G01 | DIM INSP MASTER - LPT BLADE STG 1 | 1 | |
| 856A5901G01 | MASTER - STAGE 2 LPT BLADE (MASTER) NOT ESSENTIAL TO START | 1 | |
| 856A5901G02 | DIM INSP MASTER - LPT BLADE STG 2 | 1 | |
| 856A5902G01 | DIM INSP MASTER - LPT BLADE STG 3 | 1 | |
| 856A5903G01 | DIM INSP MASTER - LPT BLADE STG 4 | 2 | |
| 856A5904G01 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 1 | 1 | |
| 856A5905G01 | FIXTURE, CHECKING - LPT STAGE 2 BLADE (CHECKING FIXTURE) NOT ESSENTIAL TO START | 1 | |
| 856A5905G02 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 2 | 1 | |
| 856A5905G03 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 2 | 1 | |
| 856A5906G01 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A5907G01 | DIM INSP CHECKING FIXTURE - LPT BLADE STG 4 | 1 | |
| 856A5908G05 | DIM INSP PROGRAM DATA DISK - LPT BLADES STG 1/4 | 1 | |
| 856A5908G06 | DIM INSP PROGRAM DATA DISK - LPT BLADES STG 1/4 | 1 | |
| 856A5909G02 | GAGE, BUCKLING CHECK - LPT BLADES, STAGE 1-4 (CHECK GAGE) NOT ESSENTIAL TO START | 1 | |
| 856A5910G01 | MASTER - FAN BLADE | 1 | |
| 856A5911G01 | CHECKING FIXTURE - FAN BLADE | 1 | |
| 856A5912G01 | DIM INSP PROGRAM DATA DISK - FAN BLADE | 1 | |
| 856A5912G02 | DIM INSP PROGRAM DATA DISK - FAN BLADE | 1 | |
| 856A5916G01 | LEADING EDGE CONTOUR - FAN BLADE | 1 | |
| 856A5916G02 | LEADING EDGE CONTOUR - FAN BLADE | 1 | |
| 856A5919G01 | MATING FACES MILLING FIXTURE - FAN BLADES MID SPAN SHROUD | 1 | |
| 856A5928G01 | WAVINES BLENDING LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A5928G02 | WAVINES BLENDING LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 856A5939G01 | Fan Blade Tip Clearance Tool (fan blade tip clearance tool) | 1 | |
| 856A5939G02 | MEASUREMENT FAN BLADE TIP CLEARANCE | 2 | |
| 856A5946G01 | KIT,ULTRASONIC INSPECTION – ROOT FAN BLADE | 1 | |
| 856A5946G02 | KIT,ULTRASONIC INSPECTION - ROOT FAN BLADE | 1 | |
| 856A5947G01 | FIXTURE, HOLDING –FAN BLADE | 1 | |
| 856A5947G02 | FIXTURE, HOLDING -FAN BLADE | 1 | |
| 856A6603 G01 | Master - Fan Blade | 1 | |
| 856A6603G01 | MASTER-FAN BLADE | 1 | |
| 856A6608G02 | LEAD EDGE CONTOUR OF FAN BLADE | 1 | |
| 856A6609G01 | TEMPLATE - FAN BLADE LEADING EDGE | 2 | |
| 856A6615 | FIXTURE, INSP.-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6615 REV A | FIXTURE, INSP.-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6615G01 | FIXTURE-FAN BLADE ROOT DOVETAIL | 4 | |
| 856A6616 | MASTER FAN BLADE 25 DEGREES 7 37 DEGREE ANGLED MIDSPAN | 1 | |
| 856A6616 G04 | Master – Fan Blade 25 & 37 Angled Mid Span Shrouds | 1 | |
| 856A6616 REV B | MASTER FAN BLADE 25 DEGREES 7 37 DEGREE ANGLED MIDSPAN | 1 | |
| 856A6616G01 | MASTER FAN BLADE | 1 | |
| 856A6616G02 | MASTER FAN BLADE | 1 | |
| 856A6616G03 | MASTER FAN BLADE | 1 | |
| 856A6616G04 | MASTER FAN BLADE | 1 | |
| 856A6617G01 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G02 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G04 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G05 | FIXTURE, FAN BLADE | 1 | |
| 856A6617G06 | FIXTURE, FAN BLADE | 1 | |
| 856A6627G04 | DIM INSP PROGRAM DATA DISK - FAN BLADES | 1 | |
| 856A6629-G02 | FAN BLADE WEAR TOOL | 3 | |
| 856A6632G01 | CONTOUR - TRAILING EDGE FAN BLADE | 1 | |
| 856A6634 | DOLLY, STORAGE - FAN BLADES | 1 | |
| 856A6638G01 | ROOT ECI KIT - FAN BLADE | 2 | |
| 856A6641G03 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6641G04 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6643 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6643G01 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6644 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6644G01 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6644G03 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6645G01 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6645G03 | ROOT ECI KIT - FAN BLADE | 1 | |
| 856A6700 | BLADE ADAPTOR | 1 | |
| 856A6701G01 | DIM INSP MASTER - LPT BLADE STG 1 | 1 | |
| 856A6702G01 | DIM INSP MASTER - LPT BLADE STG 2 | 1 | |
| 856A6703G01 | DIM INSP MASTER - LPT BLADE STG 3 | 1 | |
| 856A6704G01 | DIM INSP MASTER - LPT BLADE STG 4 | 1 | |
| 856A6705G01 | CHECKING FIXTURE - LPT BLADE STG 1 | 1 | |
| 856A6706G01 | CHECKING FIXTURE - LPT BLADE STG 2 | 1 | |
| 856A6707G01 | CHECKING FIXTURE - LPT BLADE STG 3 | 1 | |
| 856A6707G08 | PULLER-FAN BLADE SPACER | 1 | |
| 856A6708G01 | CHECKING FIXTURE - LPT BLADE STG 4 | 1 | |
| 856A6709G06 | PROGRAM DATA, CASSETTES TO CHECK STAGES 1-4 LPT BLADES | 1 | |
| 856A6710 | (RT) GAGE BUCKLING CHECK LPT BLADES. STAGES 1 TO 4 | 1 | |
| 856A6710G03 | GAGE SET, BUCKLING CHECK - LPT BLADES STAGES 1 THRU 4 | 1 | |
| 856A6711 G01 | Master – Fan Blade | 1 | |
| 856A6711G01 | MASTER FAN BLADE | 1 | |
| 856A6712G02 | MASTER FAN BLADE | 1 | |
| 856A6715G01 | TIP MILLING FIXTURE - BOOSTER BLADE | 1 | |
| 856A6725G01 | CONVEX GRINDING FIXUTRE - LPT BLADE STG 1 | 1 | |
| 856A6726G01 | CONCAVE GRINDING FIXUTRE - LPT BLADE STG 1 | 1 | |
| 856A6730G01 | CONVEX GRINDING FIXUTRE - LPT BLADE STG 2 | 1 | |
| 856A6731G01 | CONCAVE GRINDING FIXUTRE - LPT BLADE STG 2 | 1 | |
| 856A6747G01 | FIXURE MILL FAN BLADE | 1 | |
| 856A6754G02 | PRETWIST RESTORING FIXTURE - LPT BLADES STG 1/4 | 1 | |
| 856A6754G03 | PRETWIST RESTORING FIXTURE - LPT BLADES STG 1/4 | 1 | |
| 856A6754G05 | PRETWIST RESTORING FIXTURE - LPT BLADES STG 1/4 | 1 | |
| 856A6754G06 | PRETWIST RESTORING FIXTURE - LPT BLADES STG 1/4 | 1 | |
| 856A6761 | FIXTURE INSP.-FAN BLADE ROOT DOVETAIL | 2 | |
| 856A6761 REV A | FIXTURE INSP.-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6761G01 | FIXTURE-FAN BLADE ROOT DOVETAIL | 1 | |
| 856A6762 | PRESSURE TOOL INFLATABLE - FAN BLADES ADRADABLE LINER | 1 | |
| 856A6762G01 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6762G02 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6762G03 | PRESSURE TOOL INFLATABLE - FAN BLADES ABRADABLE LINER | 1 | |
| 856A6798G02 | MASTER - FAN BLADE | 1 | |
| 856A6806G01 | TIP CLEARANCE METER - FAN FRAME/FAN BLADE | 1 | |
| 856A6807G02 | KIT,ULTRASONIC INSPECTION - ROOT FAN BLADE | 1 | |
| 856AI058 | VIBRATOR - C/R BLADES REMOVE AND INSTALL (BLADE VI) | 1 | |
| 856S2700 | ADAPTER PULLER FAN BLADE SPACERS | 1 | |
| 856S2700 REV B | ADAPTER PULLER FAN BLADE SPACERS | 1 | |
| 85A63373G03 | FIXTURE, HOIST -LPT BLADE DISK | 1 | |
| 901 | REFLECTOR, BLADE | 1 | |
| 8620 | STROBEX BLADE TRACKER MODEL 135M-12 | 8 | |
| 9521 | Replaceable Hacksaw Blade | 1 | |
| 86495 | SAW BLADE HSS TPI:4 300 MM | 1 | |
| 86496 | SAW BLADE HSS TPI:4 530 MM | 1 | |
| 86497 | SAW BLADE HSS TPI:6 200 MM | 1 | |
| 86498 | SAW BLADE HSS TPI:6 300 MM | 1 | |
| 86499 | SAW BLADE HSS TPI:6 400 MM | 1 | |
| 86500 | SAW BLADE HSS TPI:6 500 MM | 1 | |
| 86501 | SAW BLADE HSS TPI:6 600 MM | 1 | |
| 86502 | SAW BLADE HSS TPI:6 770 MM | 1 | |
| 86503 | SAW BLADE HSS-SL TPI:6 770 MM | 1 | |
| 86504 | SAW BLADE HSS TPI:8 200 MM | 1 | |
| 86505 | SAW BLADE HSS TPI:8 300 MM | 1 | |
| 86506 | SAW BLADE HSS TPI:8 300 MM | 1 | |
| 86508 | SAW BLADE HSS TPI:8 400 MM | 1 | |
| 86509 | SAW BLADE HSS TPI:8 500 MM | 1 | |
| 86510 | SAW BLADE HSS TPI:8 600 MM | 1 | |
| 86511 | SAW BLADE HSS TPI:12 200 MM | 1 | |
| 86512 | SAW BLADE HSS TPI:12 300 MM | 1 | |
| 86513 | SAW BLADE HSS TPI:12 400 MM | 1 | |
| 86514 | SAW BLADE HSS TPI:12 500 MM | 1 | |
| 86515 | SAW BLADE HSS TPI:12 530 MM | 1 | |
| 86516 | SAW BLADE HSS-SL TPI:12 530 MM | 1 | |
| 86517 | SAW BLADE HSS TPI:12 770 MM | 1 | |
| 86518 | SAW BLADE HSS-SL TPI:12 770 MM | 1 | |
| 86519 | SAW BLADE HSS TPI:12 940 MM | 1 | |
| 86520 | SAW BLADE HSS TPI:14 150 MM | 1 | |
| 86521 | SAW BLADE HSS TPI:14 200 MM | 1 | |
| 86522 | SAW BLADE HSS TPI:14 250 MM | 1 | |
| 86523 | SAW BLADE HSS TPI:14 300 MM | 1 | |
| 86524 | SAW BLADE HSS TPI:14 400 MM | 1 | |
| 86525 | SAW BLADE HSS TPI:14 500 MM | 1 | |
| 86526 | SAW BLADE HSS TPI:14 600 MM | 1 | |
| 86527 | SAW BLADE HSS TPI:14 750 MM | 1 | |
| 86528 | SAW BLADE HSS -SL TPI:16 150 MM | 1 | |
| 86529 | SAW BLADE HSS-SL TPI:16 200 MM | 1 | |
| 86530 | SAW BLADE HSS TPI:16 200 MM | 1 | |
| 86531 | SAW BLADE HSS-SL TPI:16 250 MM | 1 | |
| 86532 | SAW BLADE HSS-SL TPI:16 300 MM | 1 | |
| 86533 | SAW BLADE HSS TPI:16 300 MM | 1 | |
| 86534 | SAW BLADE HSS-SL TPI:16 350 MM | 1 | |
| 86535 | SAW BLADE HSS TPI:16 400 MM | 1 | |
| 86536 | SAW BLADE HSS-SL TPI:16 400 MM | 1 | |
| 86537 | SAW BLADE HSS-SL TPI:16 500 MM | 1 | |
| 86538 | SAW BLADE HSS-SL TPI:16 770 MM | 1 | |
| 86539 | SAW BLADE HSS-SL TPI:16 940 MM | 1 | |
| 86540 | SAW BLADE HSS TPI:24 200 MM | 1 | |
| 86541 | COATED SAW BLADE 300 MM | 1 | |
| 86542 | COATED SAW BLADE 400 MM | 1 | |
| 86543 | COATED SAW BLADE 500 MM | 1 | |
| 86544 | COATED SAW BLADE 600 MM | 1 | |
| 86545 | COATED SAW BLADE 700 MM | 1 | |
| 86546 | COATED SAW BLADE 770 MM | 1 | |
| 86547 | SAW BLADE TP: 6-10 100 MM FOR REF. 79615 | 1 | |
| 865A2631G01 | STAND, STORAGE, FAN BLADES | 1 | |
| 8814-768-000 | INSP TEMPLATE AXIAL COMP. BLADE | 1 | |
| 8814768000 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 1 | |
| 8940158775 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) | 1 | |
| 8940158776 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) | 1 | |
| 8940158777 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocati | 1 | |
| 895-3001-10131 | TOOL ASSY, M/R BLADE WASHERS INSTALLATION | 1 | |
| 895-3101-04-201 | TOOL, M/R BLADE TRIM TAB BENDING | 1 | |
| 895-3101-10-131 | MAIN ROTOR BLADE WASHER | 1 | |
| 895-3101-19-101 | TOOL, M/ROTOR BLADE LAP PLATE BONDING | 1 | |
| 895-3101-24-101 | MR BLADE BOLT - REMOVE/INSTALL BULLET | 1 | |
| 8A-9903-000 | HOISTING SLING M/R BLADE | 1 | |
| 8AT-9114-000 | TORQUE M/R BLADE | 1 | |
| 8AT.9939-00 | BLADE FIX TRIM | 1 | |
| 8C2010 | FIXTURE, CLAMPING - HPT ROTOR BLADE, STG 1 | 1 | |
| 8C2018 | FIXTURE, INSTALL/ REMOVE STG 2 AFT BLADE RETAINER | 1 | |
| 8C2125 | FIXTURE, REMOVAL - ROTOR BLADE LOCKING LUGS NON FETT | 1 | |
| 8C2154 | NOTCH TOOL - TIP - HPCR BLADE STGS 6-11 | 1 | |
| 8C2313 | TOOL, INSTALL/REMOVE – STG 1 FAN BLADE SPACER | 1 | |
| 8C2349 | TOOL, REMOVAL-STG 1 FAN BLADE SPACER | 1 | |
| 8C2615 | FIXTURE, INSTALL/REMOVE-FAN BLADE | 1 | |
| 8C2616 | STAND, FAN BLADE CAROUSEL | 1 | |
| 8C2656 | CONTAINER,SHIP-FAN BLADES | 1 | |
| 8C4115 | FIXTURE - REMOVE - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 8C4118 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 8G6210G00231 | MR BLADE BOLT REMOVAL TOOL | 1 | |
| 8G6210G00231GAM | MAIN ROTOR BLADE RETENTION BOLT (AW189) | 1 | |
| 8G6210G00331 | M/R BLADE TRIM TAB BENDING TOOL | 1 | |
| 8G6210G03031 | MAIN ROTOR BLADE SLING | 1 | |
| 8G6430G02931 | TOOL,T/R BLADE DAMPER ATTACHMENT BUSHING REMOVAL | 1 | |
| 8RB96-ALU | BELL 407 BLADE RACK, HOLDS 8 BLADES, YEL | 1 | |
| 9-462-14-0-0 | HOLDER FOR PANSAR ® STRAIGHTENING BLADES | 1 | |
| 90-0184-1 | BLADEWINDSHIELD WIPER AREM | 1 | |
| 90-9921-00 1 | HOIST FOR LIFTING T\R BLADE | 1 | |
| 900020 | DEBURRING BLADE | 1 | |
| 900020-045 | DEBURRING BLADE | 1 | |
| 900033 | CK-1 SQUARING BLADE | 1 | |
| 900034-045 | CARBIDE BLADE SET CK-1 | 1 | |
| 900199 | BIG RUPHIS BLADE CLAMP | 1 | |
| 9002-3130S11100008 | STENCIL TYPE 14 BLADE LOWER SURFACE | 1 | |
| 900D11-0020-00 | STENCIL TYPE 9 BLADE BACK | 1 | |
| 901-11800-2 | FasTrak Blade Tracker for 8500C / +, V2K | 1 | |
| 901-11800-3 | FasTrak Blade Tracker for 8500C / +, V2K | 2 | |
| 901-11800-3 | FASTRAK Blade Tracker for 8500C | 2 | |
| 901-4027 | Honeywell Chadwick 135M Strobex Blade Tracker | 1 | |
| 901-8620 | Strobex Blade Tracker | 3 | |
| 901-8620 135M | STROBEX BLADE TRACKER | 1 | |
| 9083M19P05 | FIG 54 - 2, RETAINER STAGE 1 BLADE | 1 | |
| 9083M19P06 | FIG 54 - 38, RETAINER, BLADE | 1 | |
| 9083M19P07 | FIG 54 - 44RETAINER, STAGE 5 BLADE | 1 | |
| 9083M19P08 | FIG 54 - 52, RETAINER, STAGE 6 BLADE | 1 | |
| 9083M19P10 | FIG 54 - 32, RETAINER, BLADE | 1 | |
| 9111M35PO(X) | KIT, FAN BLADE BALANCING | 1 | |
| 91555-1 | CERTICRIMP 2;SAHT AMP BLADE | 1 | |
| 92-1170.00 | BLADE COVER ASSY | 1 | |
| 92900-04-902-01 | REGULATOR - AIRBUS SPECIAL TOOL FOR BLADE REPAIRS | 1 | |
| 93100-04-109-01 | CARPET ASSY HEATING - AIRBUS SPECIAL TOOL FOR BLADE REPAIRS | 1 | |
| 93633 | USATCO Celcon Sealant Scraper Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Celcon Scraper Blade with 1/4" Tip) (Add to cart: Contact us to order) | 1 | |
| 93634 | USATCO Celcon Sealant Scraper Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Celcon Scraper Blade with 1/4" Tip) (Add to cart: Contact us to order) (Description: Celcon Scraper Blade with 1" Tip) (Add to cart: Add To Cart) | 1 | |
| 93635 | USATCO Celcon Sealant Scraper Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Celcon Scraper Blade with 1/4" Tip) (Add to cart: Contact us to order) (Description: Celcon Scraper Blade with 1" Tip) (Add to cart: Add To Cart) ( | 1 | |
| 93636 | USATCO Celcon Sealant Scraper Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Celcon Scraper Blade with 1/4" Tip) (Add to cart: Contact us to order) (Description: Celcon Scraper Blade with 1" Tip) (Add to cart: Add To Cart) ( | 1 | |
| 93637 | USATCO Celcon Sealant Scraper Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Celcon Scraper Blade with 1/4" Tip) (Add to cart: Contact us to order) (Description: Celcon Scraper Blade with 1" Tip) (Add to cart: Add To Cart) ( | 1 | |
| 94126 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) | 1 | |
| 94128 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) (Description: Blade Assembly with Shoe) (Add to cart: Contact us to order) | 1 | |
| 94324 | TIGAIR® Heavy Duty Portable Hacksaw Kit (Strokes per minute: 0 to 1,200) (Stroke length: 3/4") (Weight (saw): 6 lbs (2.7 kgs)) (Overall length (saw): 16" (406 mm)) (Add to cart: Add To Cart) (Strokes per minute: Replacement Blades (10 pack)) (Stroke lengt | 1 | |
| 941586 | MEDIUM BLADE | 1 | |
| 9446M56 | PROGRAM, FAN BLADE REPLACEMENT | 1 | |
| 9446M56G03 | PROGRAM FAN BLADE REPLACEMENT | 1 | |
| 9446M56G04 | PROGRAM, FAN BLADE BALANCE | 1 | |
| 9446M61 | PROGRAM - BALANCE - BLADE INSTALLATION/REPLACEMENT | 1 | |
| 9446M61 PRO | PROGRAM - BALANCE - BLADE INSTALLATION/REPLACEMENT | 1 | |
| 9446M61G01 | PROGRAM, BALANCE - BLADE INSTALLATION/REPLACEMENT (GE BLADEPLOT FAN BLADE MAPPING SOFTWARE) | 1 | |
| 9446M61G02 | PROGRAM, BALANCE - BLADE INSTALLATION/REPLACEMENT (BALANCE PROGRAM) | 1 | |
| 9446M61G03 | PROGRAM, BLADE INSTALLATION | 1 | |
| 9446M61G04 | BALANCE-BLADE REPLACEMENT | 1 | |
| 9446M61G05 | Programe,Fan Blade Replacement | 2 | |
| 9446M61G06 | PROGRAM, BALANCE-BLADE | 2 | |
| 9446M61G07 | PROGRAM, BALANCE - BLADE INSTALLATION/REPLACEMENT | 1 | |
| 9446M61G08 | PROGRAM, BALANCE - BLADE INSTALLATION /REPLACEMENT | 1 | |
| 9446M61G09 | PROGRAM, BALANCE-BLADE INSTALLATION/REPLACEMENT | 1 | |
| 9446M61G10 | PROGRAM, BALANCE - BLADE | 1 | |
| 9446M61G11 | PROGRAM, FAN BLADE REPLACEMENT | 1 | |
| 9470M55G02 | BLADE PROGRAMME TOOL | 1 | |
| 9470M55G03 | PROGRAM - BALANCE - BLADE | 1 | |
| 9470M55G04 | PROGRAM, BALANCE-BLADE INSTALLATION/REPLACEMENT (BLADE PLOT BALANCE PROGRAM) | 1 | |
| 9470M55G05 | PROGRAM, BALANCE-BLADE INSTALLATION/REPLACEMENT (BLADE PLOT BALANCE PROGRAM) | 1 | |
| 9471M44P01 | KIT - BORESCOPE, BLENDING, HPC BLADES | 1 | |
| 95103 | ADVANZ DG DIAMOND GRIT BAND SAW BLADES | 1 | |
| 951210DA | COVER - RAT BLADE | 1 | |
| 956A1005P20 | CLIPS FOR 956A1005G02 INSTALL / REMOVE -STAGE 2 AFT BLADE RETAINER | 1 | |
| 956A1015 | CONTAINER - HPT ROTOR STAGE 1 & 2 BLADES | 1 | |
| 956A1016 | RETAINER - BLADE- SLAVE - HPT ROTOR - STG 1 | 1 | |
| 956A1030 | FIXTURE - CHILL-HPT BLADE RETAINER - STAGE 2 | 1 | |
| 956A1034 | FIXTURE - TIP NOTCH-BLADES - STG 1 & STG 2 | 1 | |
| 956A1042 | FIXTURE - SEPARATION - INTERSTAGE SEAL/BLADE RETAINER | 1 | |
| 956A1042G01 | Fixture,separation-interstage seal/blade retainer | 1 | |
| 956A1047 | INSTALL/REMOVAL - BLADES - STG 1 - HPT | 1 | |
| 956A1062 | FIXTURE - REMOVE - STG 1 BLADE RETIANER - HPT | 1 | |
| 956A1070 | FIXTURE - INSTALL - BLADE RETAINER - STAGE 1 | 1 | |
| 956A1070G01 | Fixture,install-blade retainer,stage 1 | 1 | |
| 956A1117 | PROTECTOR - BLADE | 1 | |
| 956A1145 | PROTECTOR SET - HPCR BLADES | 1 | |
| 956A1212 | COVER - RPTOECTOR - STAGE 1 BLADE - HPT | 1 | |
| 956A1814 | FIXTURE - INSPECTION - HPT STG 2 BLADES | 1 | |
| 956A3005 | FIXTURE - INSTALL/REMOVE - STG 2 AFT BLADE RETAINER | 1 | |
| 956A3015 | CONTAINER - HPT ROTOR STAGE 1 & 2 BLADES | 1 | |
| 956A3016 | RETAINER - BLADE- SLAVE - HPT ROTOR - STG 1 | 1 | |
| 956A3017 | RETAINER - BLADE- SLAVE - HPT ROTOR - STG 2 | 1 | |
| 956A3021 | FIXTURE - CLAMPING - HPT ROTOR BLADE - STG 1 | 1 | |
| 956A3026 | PROTECTOR - BLADES HP TURBINE ROTOR | 1 | |
| 956A3030 | FIXTURE - CHILL-HPT BLADE RETAINER - STG 2 | 1 | |
| 956A3034 | FIXTURE - TIP NOTCH-BLADES - STG 1 | 1 | |
| 956A3047 | FIXTURE - INSTALL/REMOVE - STG 1 BLADES - HPTR | 1 | |
| 956A3062 | FIXTURE - REMOVE - STG 1 BLADE RETAINER - HPT | 1 | |
| 956A3212 | COVER - PROTECTOR - STAGE 1 BLADE - HPT | 1 | |
| 956A5939G01 | FAN BLADE TIP CLEARANCE TOOL (FAN BLADE TIP CIEARANCE TOOL) | 1 | |
| 956A6061 | FIXTURE - ROTATION LOCK & DRIVE - FAN BLADE DISK | 1 | |
| 956A6063 | PULLER - FAN BLADE SPACER | 1 | |
| 956A6063G01 | FAN BLADE SPACERS PULLER | 1 | |
| 956A6063G02 | U/S FIXTURE, REMOVE - SPACER, FAN BLADE | 3 | |
| 956A6063G02 | FIXTURE REMOVE SPACER FAN BLADE | 3 | |
| 956A6063G03 | DOLLY, STORAGE - FAN BLADES | 2 | |
| 956A6063G04 | FIXTURE REMOVE-SPACER,FAN BLADE | 4 | |
| 956A6065G01 | PULLER - FAN BLADE SPACER | 2 | |
| 956A6065G01 | PULLER – FAN BLADE SPACER | 2 | |
| 956A6092 | RACK- FAN BLADE STORAGE | 1 | |
| 956A6092G01 | FAN BLADESR/I TOOLS | 1 | |
| 956A6092G01 | DOLLY, STORAGE - FAN BLADES | 1 | |
| 956A6093 | TOOL - REMOVAL, FAN BLADE PLATFORM | 1 | |
| 956A6156 | FIXTURE - RESTRAIN - IGV BLADE | 1 | |
| 956A6320 | KIT - LIFTING - BLADE ASSEMBLY | 1 | |
| 956A6433 | GAUGE - MEASURE AXIAL - CLEARANCE LPT BLADES NOZZLES | 1 | |
| 956A6452 | FIXTURE - REMOVAL - LPT BLADE STAGE 7 | 1 | |
| 956A6514 | SET - PROTECTOR - LPT BLADES ASSEMBLY | 1 | |
| 956A6519 | SET - ASSEMBLY - LPT BLADES STAGE 1 TO 7 | 1 | |
| 956A6533 | FIXTURE - RESTRAINER - LPT BLADES STAGE 2-3 | 1 | |
| 956A6536 | SET - GAGE TOOL - LPT BLADED DISK | 1 | |
| 956A6545 | FIXTURE - CLEARANCE CHECK - LPT BLADES STAGE 7 | 1 | |
| 956A6629 | SET - ENDOSCOPIC FPI CHEMICALS - BOOSTER - HPC - LPT BLADES | 1 | |
| 956A6629G01 | SET, ENDOSCOPIC FPI CHEMICALS -BOOSTER, HPC, LPT BLADES | 1 | |
| 956A6629P07 | LEADING EDGE TEMPLATE - FAN BLADE | 1 | |
| 956A6630 | SET - ENDOS. FPI AIR FILTRATION - BOOSTER - HPC - LPT BLADES | 1 | |
| 956A6630G01 | SET, ENDOS. FPI AIR FILTRATION - BOOSTER, LPT BLADES | 1 | |
| 956A6631 | SET - ENDOSCOPIC FPI COMMON VISION - LP TURBINE BLADES | 1 | |
| 956A6631G01 | SET, ENDOSCOPIC FPI COMMON VISION - LP TURBINE BLADES | 1 | |
| 956A6632 | SET - ENDOSCOPIC FPI CALIBRATION - BOOSTER - HPC - LPT BLADES | 1 | |
| 956A6632G01 | SET, ENDOSCOPIC FPI CALIBRATION - BOOSTER, HPC, LPT BLADES | 1 | |
| 956A6632G02 | SET, ENDOSCOPIC FPI CALIBRATION -BOOSTER, HPC, LPT BLADES | 1 | |
| 956A6633 | SET - ENDOSCOPIC FPI - LP COMPRESSOR BLADES | 1 | |
| 956A6633G01 | SET, ENDOSCOPIC FPI CALIBRATION -BOOSTER, HPC, LPT BLADES | 1 | |
| 956A6634 | DOLLY, STORAGE - FAN BLADES | 1 | |
| 956A6634G01 | DOLLY, STORAGE - FAN BLADES 1 | 1 | |
| 956A6634G02 | RACK- FAN BLADE STORAGE | 1 | |
| 956A6854 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 956A7409 | KIT OF GO -NOGO - BLADE AND DPB - LPT | 1 | |
| 956A7651G0 | TOOL - REMOVAL, SPACER FAN BLADE, SLIDE HAMMER | 1 | |
| 956A7651G02 | TOOL - REMOVAL, SPACER FAN BLADE, SLIDE HAMMER | 4 | |
| 956A7671 | SOFTWARE, MAPPING - FAN BLADES | 1 | |
| 956A7671G01 | SOFTWARE, MAPPING - FAN BLADE | 1 | |
| 956A7671G02 | SOFTWARE, MAPPING- FAN BLADE | 1 | |
| 956A8051 | FIXTURE - REMOVE - SPACER - FAN BLADE | 1 | |
| 956A8051G02 | PULLER - FAN BLADE SPACER | 6 | |
| 956A8052 | FIXTURE - RESTRAIN - PLATFORM - FAN BLADE | 1 | |
| 956A8062G02 | Puller - Fan Blade Spacer | 5 | |
| 956A8089P06 | FAN BLADE R/I | 1 | |
| 956A8153 | FIXTURE - RESTRAIN - IGV BLADE | 1 | |
| 956A8327 | KIT - LIFTING - BLADE ASSEMBLY | 1 | |
| 956A8435 | FIXTURE - BALANCE BASEPLATE LPT BLADED DISK | 1 | |
| 956A8675G01 | FAN BLADE PLATFORMS R/I TOOL | 2 | |
| 956A8854 | FIXTURE - STOCK - BLADE LOW PRESSURE COMPRESSOR | 1 | |
| 96205-0400100 | TRESTLE BLADES | 1 | |
| 9688M46P02 | FIG 54 - 10, RETAINER, STAGE 2 BLADE | 1 | |
| 9715-14-250 | THROUGH BLADE SCREWDRIVER | 2 | |
| 97300E11-0027-00 | MAIN BLADE HANDING TROLLEY | 1 | |
| 98202-R185505-0000 | BLADE SHANK TOOL | 1 | |
| 98202-R815505-000 | BLADE SHANK TOOL | 1 | |
| 98202-R815505-0000 | BLADE SHANK TOOL | 1 | |
| 98202R815505-0000 | BLADE SHANK TOOL | 1 | |
| 98L54503019000 | LOCATION BLADE ASSY | 2 | |
| 98V24209003000 | BLADE LOCK - RAT | 3 | |
| 9946M61G06 | PROGRAM FAN BLADE R/I | 1 | |
| 9970-958-389P01 | PROBE, 3MHZ WITH SPRING BLADE | 1 | |
| 9984M29P02 | LOCK, BLADE STAGE 8-9 | 1 | |
| 9C1008 | FIXTURE - CHILL-AFT BLADE | 1 | |
| 9C1027 | RETAINER SLAVE BLADE | 1 | |
| 9C1072 | FIXT.,INSTALL/REMOVE LPT BLADE | 1 | |
| 9C1202 | TOOL - SLIDE HAMMER FOR STAGE 1 FAN BLADE SPACER REMOVAL, GE90-70/80/90 AND -100 SERIES ENGINES | 1 | |
| 9C1202G02 | FAN BLADES SPACER TO | 6 | |
| 9C1223 | PROTECTOR SET - HPT-STG 2 BLADE | 1 | |
| 9C1278P02 | TOOL - REMOVAL, SPACER FAN BLADE | 1 | |
| 9C1322G02 | FAN BLADE RUNOUT CHECKING TOOL GE90 | 1 | |
| 9C1341 | GAGE, FAN BLADE/CASE TAPER | 1 | |
| 9C1341P01 | GAUGE -TAPER FAN BLADES/CASE | 2 | |
| 9C1361 | FIXTURE - FAN BLADE SPINNER R/I | 1 | |
| 9C1487 | BLADE RETAINER DAM | 1 | |
| 9C1579G01 | TIP ECI KIT - HPCR BLADE STG 1/6 | 1 | |
| 9C2157 | MASTER HPCR BLADE - STAGE 2 | 1 | |
| 9C2157G02 | BALANCING MASTER - HPCR BLADE STG 2 | 1 | |
| 9C2178 | BLADE SPACING TOOL | 1 | |
| 9C2270G01 | Gauge blade lock seating stages 7-9 | 1 | |
| 9C2270G02 | LOCK SEATING GAGE - HPCR STG 7/9 BLADES | 1 | |
| 9C2273 | GAGE-BLADE CLEARANCE | 1 | |
| 9C2273G01 | Tool set Gauge blade platform | 1 | |
| 9C3001 | TOOL, REMOVAL-STG 1 FAN BLADE | 1 | |
| 9C3001G01 | SLIDE HAMMER-FAN BLADE | 1 | |
| 9C3036G01 | TOOL - REMOVAL,SPINNER FAN BLADE | 2 | |
| 9C3043 | FIXTURE, CLAMP-HPT ROTOR STAGE 1 BLADES | 1 | |
| 9C3124G01 | CLASS 6 LOW PRESSURE TURBINE ROTOR BLADE INSPECTION EQUIPMENT | 1 | |
| 9C3124G03 | STAGE 6 LPT BLADE INSPECTION TOOL | 2 | |
| 9C3129 | FIXTURE - SPREAD-FAN BLADE | 1 | |
| 9C3129G01 | FIXTURE SPREAD FAN BLADE | 1 | |
| 9C3129G01 | FIXTURE, SPREAD-FAN BLADE | 1 | |
| 9C3131G02 | NTERNAL LOCK WEAR CALCULATION SOFTWARE FOR STAGE 6 LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| 9C3131G03 | STAGE 6 LPT BLADE INTERLOCK WEAR CALCULATION SOFTWARE PROGRAM (SOFTWARE) "GE90-115B-ON_WING_MEASURE_SB72_0526_V2.0.XLSX" | 1 | |
| 9C3146 | PROGRAM, CALCULATION - FAN BLADE INTERLOCK/ WEAR | 1 | |
| 9C3151 | FIXTURE GRINDING BLADE TIP HP COMP ROTOR STG. 2 TO 4 | 1 | |
| 9C3184G01 | STAGE 6 LPT BLADE INSPECTION TOOL | 4 | |
| 9C6028 | FAN BLADE CONTAINER | 1 | |
| 9C6028G01 | FAN BLADE CAROUSEL | 1 | |
| 9C6028P01 | CONTAINER-FAN BLADES GE90 | 1 | |
| 9C6029P01 | CONTAINER, SHIPPING - SINGLE FAN BLADE | 1 | |
| A-C147282-1/03 | BLADE ANGLE FEEDBACK LEVER DISTANCE SETTING TOOL | 1 | |
| A-MP90.045-60BL/1-3M | BLADE PROBE (LH SIDE) | 1 | |
| A102948-01 (2C14907G01) | SHAFT (stg 3-9 with blades) | 1 | |
| A103645-01 | HP COMPR ROTOR SUB ASSY STG 11-14 SPOOL WITH BLADES | 1 | |
| A109-400 | BLADE COVERS (set of 4) | 1 | |
| A109-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| A109-500 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| A109BF-100-1 | BLADE FOLD KIT PROVISIONS | 1 | |
| A109BF-100-3 | BLADE FOLDING PROVISIONS (A109A, A109AII, A109C, A109K2, A109E, A109S, A119, AND | 1 | |
| A109BF-100-6 | BLADE FOLDING PROVISIONS ONLY (AW109SP AND AW119MKII S/N 14941 AND SUBSEQUENT WI | 1 | |
| A109BF-2600-22 | BLADE SUPP.ASSY PAD | 1 | |
| A109BF-900-1 | COMPLETE BLADE FOLDING KIT (A109A, A109AII, A109C, A109K2, A109E, A109S, A119) | 1 | |
| A109BF-900-3 | BLADE FOLD SUPPORTS ONLY (NON STC PARTS) | 1 | |
| A109BF-900-6 | COMPLETE BLADE FOLDING KIT (AW109SP AND AW119MKII S/N 14941 AND SUBSEQUENT WITH | 1 | |
| A119-300 | BLADE COVERS (set of 4) | 1 | |
| A119-301 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| A119-310 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| A119-312 | BLADE TIE-DOWNS w/ installation tool (set of 5) | 1 | |
| A139-200 | BLADE COVERS (set of 5) | 1 | |
| A139-210 | BLADE COVERS, cold weather type (set of 5) | 1 | |
| A139-300 | TAIL ROTOR BLADE COVERS (set of 4) | 1 | |
| A139-500 | BLADE TIE-DOWNS (fabric type) (set of 5) | 1 | |
| A169-300 | BLADE COVERS (set of 4) | 1 | |
| A169-301 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| A169-310 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| A19-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| A19-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| A23-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| A23-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| A24-130 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| A24-135 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| A26-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| A26-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| A2K-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| A2K-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| A2K-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| A2K-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| A315-400 | BLADE COVERS (set of 3) | 1 | |
| A315-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| A315-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| A315-620 | TAIL ROTOR BLADE TIE-DOWNS (set of 3) | 1 | |
| A316B-400 | BLADE COVERS (set of 3) | 1 | |
| A316B-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| A316B-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| A316B-620 | TAIL ROTOR BLADE TIE-DOWNS (set of 3) | 1 | |
| A318C-400 | BLADE COVERS (set of 3) | 1 | |
| A318C-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| A318C-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| A318C-600 | TAIL ROTOR BLADE COVERS, EACH, 3-blade system (set of 3) | 1 | |
| A318C-610 | TAIL ROTOR HUB COVER, 3-blade system | 1 | |
| A318C-620 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| A318C-630 | TAIL ROTOR BLADE COVER, 2-blade system | 1 | |
| A332-210 | MAIN ROTOR BLADE COVERS (set of 4) | 1 | |
| A332-220 | MAIN ROTOR BLADE COVERS (cold weather type) (set of 4) | 1 | |
| A332-250 | MAIN ROTOR BLADE TIE DOWNS (set of 4) | 1 | |
| A341-400 | BLADE COVERS (set of 3) | 1 | |
| A341-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| A341-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| A350-400 | BLADE COVERS (set of 3) | 1 | |
| A350-405 | BLADE COVERS w/tie-down add-on detail (set of 3) | 1 | |
| A350-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| A350-415 | BLADE COVERS (COLD WEATHER TYPE), w/ tie-down add-on detail (set of 3) | 1 | |
| A350-420 | BLADE COVERS (COLD WEATHER TYPE), w/ tie-down & hail padding (set of 3) | 1 | |
| A350-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| A350-501 | BLADE TIE-DOWNS, w/telescoping attachment handle (set of 4) | 1 | |
| A350-610 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| A355-400 | BLADE COVERS (set of 3) | 1 | |
| A355-405 | BLADE COVERS w/tie-down add-on detail (set of 3) | 1 | |
| A355-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| A355-415 | BLADE COVERS (COLD WEATHER TYPE), w/ blade tie-down detail (set of 3) | 1 | |
| A355-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| A355-501 | BLADE TIE-DOWNS w/semi-rigid upper & lower surface (set of 3) | 1 | |
| A355-610 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| A365-300 | BLADE COVERS (set of 4) | 1 | |
| A365-301 | BLADE COVERS, WZ-9G model (set of 4) | 1 | |
| A365-310 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| A365-320 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| A55006-1 | TEMPLATE - BLADE SEAL FITTING, HORIZONTAL STABILIZER | 1 | |
| A55006-1-ML | BLADE SEAL TEMPLATE | 1 | |
| A55006-2 | BLADE SEAL | 1 | |
| A64D-300 | BLADE COVERS (set of 4) | 1 | |
| A64D-310 | BLADE COVERS (cold weather type) (set of 4) | 1 | |
| A64D-311 | BLADE COVERS (cold weather type, priced separately) | 1 | |
| A64D-320 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| A64D-400 | TAIL ROTOR BLADE COVERS (set of 4) | 1 | |
| AA1-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| AA1-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| AA5-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| AA5-152 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| AA5-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| AAENES060406 | SPARE BLADE FOR EXT THREADMATE | 1 | |
| AAERKTM20 | SPARE BLADE FOR INT THREADMATE | 1 | |
| AAERKTM21 | SPARE BLADE FOR INT THREADMATE | 1 | |
| AB72001-SK7 | PULLER/PUSHER, FAN BLADE ROTOR INST/REM. | 1 | |
| ABL-.030-6/1-3MHZ | EDDY CURRENT BLADE PROBE, STRAIGHT SHAFT, .030"(7.62mm) THICK, 1-3MHz WITH A 2MHz CENTER FREQUENCY, 6.0"(152.4mm) LONG SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test report and Certificate of Conformance. | 1 | |
| ABL-.030-6/500K-2MHZ | BLADE PROBE, STRAIGHT, .030" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-.045-6 | STRAIGHT SHAFT BLADE PROBE, .045" THICK, 6.0" LONG, , 50-500KHz, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-.060-6 | STRAIGHT SHAFT BLADE PROBE, .060" THICK, 6.0" LONG, , 50-500KHz, SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-.060-6/500K-2MHZ | BLADE PROBE, STRAIGHT, .060" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-.090-6 | BLADE PROBE, .090 THICK, 6"L, STRAIGHT, 50-500KHX, MICRODOT. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-.100-6/500K-2MHZ | BLADE PROBE, STRAIGHT, .100" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-1045-6/500K-2MHZ | 45° BLADE PROBE, .100" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-1060-6/500K-2MHZ | 60° BLADE PROBE, .100" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-1090-6/500K-2MHZ | 90° BLADE PROBE, .100" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-345-6/500K-2MHZ | 45° BLADE PROBE, .030" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-360-6/500K-2MHZ | 60° BLADE PROBE, .030" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-390-6/500K-2MHZ | 90° BLADE PROBE, .030" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-445-6 | BLADE PROBE, .045 THICK, 6.0" LONG, 45°, 50-500KHz, MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-645-6/500K-2MHZ | 45° BLADE PROBE, .060" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-660-6/500K-2MHZ | 60° BLADE PROBE, .060" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-690-6/500K-2MHZ | 90° BLADE PROBE, .060" THICK, 6.0" LONG, 500KHZ-2MHz WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-945-6 | BLADE PROBE, .045 THICK, 6.0" LONG, 90°, 50-500KHz, MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-945-6LH/1-3M | BLADE PROBE LEFT HAND | 1 | |
| ABL-945-6LH/50-500K | BLADE PROBE, LEFT HAND SIDE SENSING, .045" THICK, 90°, 1.18" DROP 50-500KHz 6.0" WORKING LENGTH SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-945-6RH/1-3M | BLADE PROBE, RIGHT HAND | 1 | |
| ABL-945-6RH/50-500K | BLADE PROBE, RIGHT HAND SIDE SENSING, .045" THICK, 90°, 1.18" DROP 50-500KHz 6.0" WORKING LENGTH SUPPLIED WITH A MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ABL-960-6 | FLEXIBLE BLADE PROBE SHIELDED, 50-500KHZ, 90°DEGREES, .500" DROP. .060" THICK, 6.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR | 1 | |
| ABL-990-6 | BLADE PROBE 90 DEG .090" THICK 6.0" LONG MICRODOT CONNECTOR, 50-500KHZ. Includes Test Report and Certificate of Conformance. | 1 | |
| ABTR | EC145/ UH72/ BK117/ ALIGNMENT BULLET FOR T/R BLADE MOUNTING FORK AND TORISION STRAP | 1 | |
| AC500-130 | PROPELLOR/SPINNER COVERS, 3 blade (500 & 520) (set of 2) | 1 | |
| AC500-132 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (500 & 520) (set of 2) | 1 | |
| AC500-135 | PROPELLOR/SPINNER COVERS, 2 blade (500 & 520) (set of 2) | 1 | |
| AC500-137 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (500 & 520) (set of 2) | 1 | |
| AC680-150 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| AC680-155 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| AC690-160 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| AC690-165 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| ACL-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| ACL-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| ACR-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| ACX-250-1 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 6 | |
| AD4N-120 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| AD4N-125 | INSULATED PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| ADGBLADEC0VER | CRJ ADG BLADE COVE | 1 | |
| ADTS2000 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 2 | |
| ADTS3350ER | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 2 | |
| ADTS405F | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 15 | |
| ADTS505 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 8 | |
| ADTS530 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 1 | |
| ADTS552F | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 8 | |
| ADTS553 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 1 | |
| AEROFAB ABL-390-6/500K-2M | BLADE PROBE | 1 | |
| AF-5055 | HIGH FREQUENCY DIFFERENTIAL BLADE PROBE, 50-500KHZ(200KHz CENTER FREQUENCY), TRIAX FISCHER CONNECTOR, 6.0" LONG, FLEXIBLE SHAFT, .060" FLAT (THICK), SHIELDED. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5055/2M | HIGH FREQUENCY DIFFERENTIAL BLADE PROBE, 1-3MHz, TRIAX FISCHER CONNECTOR, 6.0" LONG, FLEXIBLE SHAFT, .060" FLAT (THICK), SHIELDED. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5059 | HIGH FREQUENCY BLADE PROBE, STRAIGHT, 6.5" LONG 50-500KHz WITH TRIAX FISCHER CONNECTOR.Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5073 | HIGH FREQUENCY BLADE PROBE, 100-500KHz, .045 THICK, 7"LONG (HANDLE 2.5") 45° ANGLE, .5" DROP, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5151 | CUSTOM BLADE PROBE, ABSOLUTE .030 THICK, UNSHIELDED, 6" LONG, STRAIGHT, 50-500KHZ, TRIAX FISCHER CONNECTOR. | 1 | |
| AF-5233 | CUSTOM FLEXIBLE BLADE PROBE 90° DEGREES, .045" THICK 6.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR, 50-500KHZ Includes Test Report and Certificate of Conformance. REFERENCE: Canadair 215/215T ATA 53-10, 57-30 Service Bulletin 215-A558 | 1 | |
| AF-5296 | CUSTOM BLADE PROBE, STRAIGHT, WITH A .045" THICK TIP WITH A 45° JOGGLE AT THE HANDLE, 4.0" LONG, 100-500KHz, SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes test report and Certificate of Conformance. | 1 | |
| AF-6001 | ENGINE BLADE PROBE, REFLECTION, 6'L ATTACHED TO 16PIN LEMO CONNECTOR, 1-4MHZ, TI | 1 | |
| AF-8000 | PRATT & WHITTNEY ENGINE BLADE PROBE WITH ATTACHED CABLE 6.0' FT LONG WITH 16PIN LEMO CONNECTOR , DIFFERENTIAL 1-4 MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-8001 | PROBE - EDDY CURRENT, FIRST STAGE FAN BLADE (SPL-2183) | 1 | |
| AF-8001/4F | PRATT & WHITTNEY ENGINE BLADE PROBE, DIFFERENTIAL 1-4 MHz, SUPPLIED WITH 4 PIN FISCHER CONNECTOR. DIFFERENTIAL 1-4 MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-8001/BNC | PRATT & WHITTNEY ENGINE BLADE PROBE, DIFFERENTIAL 1-4 MHz, ATTACHED CABLE 6.0' FEET LONG WITH A BNC CONNECTOR FOR ROHMANN M2/M3 SERIES INSTRUMENTS, NO BALANCE LOAD,PARAMETRIC OPERATION. DIFFERENTIAL 1-4 MHz. Includes Test Report and Certificate of C... | 1 | |
| AF-8001A | PRATT & WHITTNEY ENGINE BLADE PROBE, DIFFERENTIAL 1-4 MHz, SUPPLIED WITH 4 PIN FISCHER CONNECTOR. DIFFERENTIAL 1-4 MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AFC-470-1-50 | Airwolf AFC-470-1-50 Oil Filter Can Cutter Replacement Blade | 1 | |
| AFC470-RB | BLADE, REPLACMENT FOR AFC-470 | 2 | |
| AFC470RB | REPLACEMENT BLADE | 2 | |
| AGE 15954 | RAM AIR TURBINE (RAT) BLADE PROTECTIVE COVER (QTY | 3 | |
| AGE15515 | RAM AIR TURBINE BLADE PROTECTIVE COVER | 1 | |
| AGE15902 | BLADE ANGLE FIXTURE | 1 | |
| AGE15954 | AM AIR TURBINE (RAT) BLADE PROTECTIVE COVER | 3 | |
| AGE16515 | COVER, BLADE | 6 | |
| AGE18171 | RAT BLADE COVER | 1 | |
| AGE19935 | RAM AIR TURBINE (RAT) BLADE PROTECTIVE COVER (QTY 2) | 1 | |
| AGE70554 | BLADE TIP DIA. GAUGE SPECIAL | 1 | |
| AGE70776 | BLADE LOCK BENDING FIXTURE | 1 | |
| AGR-300 | BLADE COVERS (set of 4) | 1 | |
| AGR-301 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| AGR-302 | BLADE COVERS (COLD WEATHER TYPE) w/ tie down detail (set of 4) | 1 | |
| AGR-310 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| AGSE-C061 | FAN BLADE | 1 | |
| AGSE-E24007-P04 | FWD MOUNT BLADE | 1 | |
| AH120-200 | BLADE COVERS (std type) (set of 3) | 1 | |
| AH120-201 | BLADE COVERS w/tie-down add-on (set of 3) | 1 | |
| AH120-210 | BLADE COVERS (cold weather type) (set of 3) | 1 | |
| AH120-211 | BLADE COVERS cold weather type w/tie-down add-on (set of 3) | 1 | |
| AH120-230 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| AH130-400 | BLADE COVERS (set of 3) | 1 | |
| AH130-405 | BLADE COVERS, cold weather type (set of 3) | 1 | |
| AH130-410 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| AH130-415 | BLADE TIE-DOWNS w/semi-rigid upper & lower surfaces (set of 3) | 1 | |
| AH135-600 | BLADE COVERS (STANDARD DESIGN) (set of 4) | 1 | |
| AH135-610 | BLADE COVERS (COLD WEATHER DESIGN) (set of 4) | 1 | |
| AH135-611 | BLADE COVERS, special detail for fixed static wick (Cold Weather Type) (set of 4) | 1 | |
| AH135-615 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| AH135-620 | BLADE TIE-DOWNS w/Telescoping Attachment Handle (set of 5) | 1 | |
| AH145-200 | BLADE COVERS, special detail for fixed static wick (set of 4) | 1 | |
| AH145-205 | BLADE COVERS, special detail for fixed static wick (Cold Weather Type) (set of 4) | 1 | |
| AH145-206 | BLADE COVERS, special detail for fixed static wick (Cold Weather Type), D3 5-blade (set of 5) | 1 | |
| AH145-220 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| AH145-221 | BLADE TIE-DOWNS, w/telescoping attachment handle (set of 5) | 1 | |
| AH145-225 | BLADE TIE-DOWNS (fabric type) (D3 5-blade models) (set of 5) | 1 | |
| AH145-226 | BLADE TIE-DOWNS, w/telescoping attachment handle (D3 5-blade models) (set of 6) | 1 | |
| AH145-301 | ROTOR HUB COVER, Ext. to cover counterweights, (D3 5-blade models) | 1 | |
| AH145-315 | ROTOR HUB COVER, Folded blade design, Ext. to cover counterweights | 1 | |
| AH145-316 | ROTOR HUB COVER, No blades installed | 1 | |
| AH145-317 | ROTOR HUB COVER, Folded blade design, Ext. to cover counterweights, D3 5-blade | 1 | |
| AH155-300 | BLADE COVERS (set of 5) | 1 | |
| AH155-310 | BLADE COVERS (COLD WEATHER TYPE) (set of 5) | 1 | |
| AH155-320 | BLADE TIE-DOWNS (fabric type) (set of 5) | 1 | |
| AH175-400 | BLADE COVERS (cold weather type) (set of 4) | 1 | |
| AH175-500 | TAIL ROTOR BLADE COVERS (set of 4) | 1 | |
| AH225-210 | MAIN ROTOR BLADE COVERS (set of 5) | 1 | |
| AH225-220 | MAIN ROTOR BLADE COVERS (cold weather type) (set of 5) | 1 | |
| AH225-250 | MAIN ROTOR BLADE TIE DOWNS (set of 5) | 1 | |
| AH332-210 | MAIN ROTOR BLADE COVERS (set of 4) | 1 | |
| AH332-220 | MAIN ROTOR BLADE COVERS (cold weather type) (set of 4) | 1 | |
| AH332-250 | MAIN ROTOR BLADE TIE DOWNS (set of 4) | 1 | |
| AH350-400 | BLADE COVERS (set of 3) | 1 | |
| AH350-405 | BLADE COVERS w/tie-down add-on detail (set of 3) | 1 | |
| AH350-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| AH350-415 | BLADE COVERS (COLD WEATHER TYPE), w/ tie-down add-on detail (set of 3) | 1 | |
| AH350-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| AH350-501 | BLADE TIE-DOWNS, w/telescoping attachment handle (set of 4) | 1 | |
| AH350-610 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| AH355-400 | BLADE COVERS (set of 3) | 1 | |
| AH355-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| AH355-415 | BLADE COVERS (COLD WEATHER TYPE), w/ blade tie-down detail (set of 3) | 1 | |
| AH355-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| AH355-501 | BLADE TIE-DOWNS w/semi-rigid upper & lower surface (set of 3) | 1 | |
| AH355-610 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| AH365-300 | BLADE COVERS (set of 4) | 1 | |
| AH365-301 | BLADE COVERS, WZ-9G model (set of 4) | 1 | |
| AH365-310 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| AH365-320 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| AH6-400 | BLADE COVERS (set of 5) | 1 | |
| AH6-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 5) | 1 | |
| AH6-600 | BLADE TIE-DOWNS (fabric type) (set of 5) | 1 | |
| AH72-200 | BLADE COVERS, special detail for fixed static wick (set of 4) | 1 | |
| AH72-205 | BLADE COVERS, special detail for fixed static wick (Cold Weather Type) (set of 4) | 1 | |
| AH72-220 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| AID-01383 | IMPELLER BLADE INSPECTION AID | 1 | |
| AL7-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| AL7-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| AL7-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| AL7-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| ALT-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| ALT-122 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| ALT-125 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| AM-520-EUR | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 1 | |
| AMM-155 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| AMM-156 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| AN2-120 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| AN2-125 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| AP6108 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 2 | |
| APA-130 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| APA-135 | INSULATED PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| APT17704 | 4IN SERRATED BLADE | 1 | |
| APT17705 | 6IN SERRATED BLADE | 1 | |
| APT17706 | 8IN SERRATED BLADE | 1 | |
| APTWINDK08H | 52MM BENT CURVED BLADE | 1 | |
| APTWINDKO | AIR WINDSHLD RMVR W 3PC BLADES | 1 | |
| APWR-300 | BLADE COVERS (set of 4) | 1 | |
| APWR-301 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| APWR-310 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| ARC-101 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| ARC-102 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| ARC-103 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| ARC-104 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| AS-047 | FAN BLADE REMOVAL TOOL | 1 | |
| AS350.000.046 | INSPECTION TEMPLATE FOR TAIL ROTOR BLADES | 1 | |
| AS5180D04 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 3 | |
| ASAPTCB | ASA Blade Style Pitot Tube Cover ASAPTCB | 1 | |
| ASB4-42 | 18 TOOTH AIR SAW BLADE QTY10. | 1 | |
| ASB4-43 | 24 TOOTH AIR SAW BLADE QTY 10 | 1 | |
| ASB4-44 | 32 TOOTH AIR SAW BLADE QTY 10 | 1 | |
| AT19-200 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| AT19-205 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| AT190-39C | 5PK BL METAL BLADE 18TPI SCROL | 1 | |
| AT190-40C | 5PK BI METAL BLADE 24TPI SCROL | 1 | |
| AT190-41C | 5PK BI METAL BLADE 32TPI SCROL | 1 | |
| AT195-37 | LEFT BLADE | 1 | |
| AT195-39B | CENTER BLADE | 1 | |
| AT195-40B | RIGHT BLADE | 1 | |
| AT4-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| AT4-155 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| AT770-15MP6 | ROTOR BLADE 6PK | 1 | |
| AT956414 | FAN BLADE TIP PROTECTORS | 1 | |
| ATBL-.030-6/1-3MHZ | STRAIGHT SHAFT BLADE PROBE, 1-3MHz .030" THICK, .200" WIDE, 6.0" LONG SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| ATBL-.030-9 | BLADE PROBE 50-500KHz, .030" THICK, 9.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.030-9/500K-2MHZ | BLADE PROBE 500KHz-2MHz, .030" THICK, 9.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.045-10 | BLADE PROBE 50-500KHz, .045" THICK, 10.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.045-12 | BLADE PROBE 50-500KHz, .045" THICK, 12.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.045-15 | BLADE PROBE 50-500KHz, .045" THICK, 15.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.045-6 | BLADE PROBE 50-500KHz, .045" THICK, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.045-7 | BLADE PROBE 50-500KHz, .045" THICK, 7.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.060-6 | BLADE PROBE 50-500KHz, .060" THICK, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.060-6/1-3MHZ | STRAIGHT SHAFT BLADE PROBE, 1-3MHz .060" THICK, .200" WIDE, 6.0" LONG SUPPLIED WITH A TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| ATBL-.060-8 | BLADE PROBE 50-500KHz, .060" THICK, 8.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.080-6 | BLADE PROBE 50-500KHz, .080" THICK, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.090-6 | BLADE PROBE 50-500KHz, .090" THICK, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.445-6 | BLADE PROBE 50-500KHz, .045" THICK, 45 DEGREE ANGLE TIP, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.460-6 | BLADE PROBE 50-500KHz, .060" THICK, 45 DEGREE ANGLE TIP, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-.945-6 | BLADE PROBE 50-500KHz, .045" THICK, 90 DEGREE ANGLE TIP, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-045U-6/2MHZ | BLADE PROBE UNSHIELDED 1-3MHz, .045" THICK, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-360-6 | BLADE PROBE 50-500KHz, .060" THICK, 30 DEGREE, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-4560-6 | BLADE PROBE 50-500KHz, .060" THICK, 45 DEGREE, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-4560-7/1-3MHZ | BLADE PROBE 1-3MHz, .060" THICK, 45 DEGREE, 7.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-490-6 | BLADE PROBE 50-500KHz, .090" THICK, 45 DEGREE ANGLE TIP, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-645-6 | BLADE PROBE 50-500KHz, .045" THICK, 60 DEGREE ANGLE TIP, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-660-6 | BLADE PROBE 50-500KHz, .060" THICK, 60 DEGREE ANGLE TIP, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-9030-6 | BLADE PROBE 50-500KHz, .030" THICK, 90 DEGREE ANGLE TIP, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL-9060-6 | BLADE PROBE 50-500KHz, .060" THICK, 90 DEGREE ANGLE TIP, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL.030-10 | BLADE PROBE 50-500KHz, .030" THICK, 10.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL.030-6 | BLADE PROBE 50-500KHz, .030" THICK, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBL09-1.2R-6 | BLADE PROBE 50-500KHz, .090" THICK, 1.2 RADIUS, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATBLU-.060-6 | BLADE PROBE UNSHIELDED 50-500KHz, .060" THICK, 6.0" LONG, STRAIGHT, TRIAX FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| ATC-115 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| ATC-117 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| ATCL.1PB | ATCHET BLADE HOLDER SCREW DRIVER | 2 | |
| ATCL_1PB | ATCHETBLADEHOLDERSCREWDRIVER | 2 | |
| ATI437C | DEBURRING BLADE SET-3 PC | 1 | |
| ATI437C-1 | CARBIDE DEBUR BLADE-SQUARE | 1 | |
| ATI437C-2 | CARBIDE DEBUR BLADE-INSIDE | 1 | |
| ATI437C-3 | CARBIDE DEBUR BLADE-OUTSIDE | 1 | |
| ATI511 | CHIP CHASER-2-3/4IN BLADE | 1 | |
| ATI512 | CHIP CHASER-5-7/8IN BLADE | 1 | |
| ATI518AHP | HANDLE AND BLADE ASSY. | 1 | |
| ATI521A | DEBURRING TOOL BLADE | 1 | |
| ATI521C | DEBURRING TOOL BLADE | 1 | |
| ATISP200 | CHIP CHASER BLADE | 1 | |
| ATISP20002 | CHIP CHASER BLADE-PT-5-7/8IN-L | 1 | |
| ATISP20003 | CHIP CHASER BLADE-BL-5-7/8IN-L | 1 | |
| ATISP20004 | CHIP CHASER BLADE-PT-2-3/4IN-L | 1 | |
| ATISP20005 | CHIP CHASER BLADE-BL-2-3/4 L | 1 | |
| ATR-130 | PROPELLOR/SPINNER COVER, 4-blade (set of 2) | 1 | |
| ATR-131 | PROPELLOR/SPINNER COVER, 6-blade (set of 2) | 1 | |
| ATR-132 | INSULATED PROPELLOR/SPINNER COVER, 4-blade (set of 2) | 1 | |
| ATR-134 | INSULATED PROPELLOR/SPINNER COVER, 6-blade (set of 2) | 1 | |
| AUS-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| AUS-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| AV-001-004 | BLADE BALANCE, MAIN ROTOR BLADE,AVION | 1 | |
| AVD-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| AVD-115 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| AVD-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| AVD-125 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| AVT-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| AVT-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| AW139BF-100-1 | BLADE BOLT EXTRACTION KIT | 1 | |
| AW139BF-3500-1 | TOOL KIT, MAIN ROTOR BLADE, BOLT EXTRACTOR | 2 | |
| AZT-110 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| AZT-115 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade (set of 2) | 1 | |
| B-1 | Beverly® Throatless Shears (Capacity: 14 / 18 ga.) (Blade length: 4-1/2") (Height less handle: 14") (Overall length: 9" (22.9 cm)) (Add to cart: Add To Cart) | 6 | |
| B-1-1 | Beverly® Throatless Shear Blades (Shroud height: B-1) (Add to cart: Add To Cart) | 1 | |
| B-2 | Beverly® Throatless Shears (Capacity: 14 / 18 ga.) (Blade length: 4-1/2") (Height less handle: 14") (Overall length: 9" (22.9 cm)) (Add to cart: Add To Cart) (Capacity: 10 / 14 ga.) (Blade length: 4-3/8") (Height less handle: 14") (Overall length: 10" (25 | 6 | |
| B-2-1 | Beverly® Throatless Shear Blades (Shroud height: B-1) (Add to cart: Add To Cart) (Shroud height: B-2) (Add to cart: Add To Cart) | 1 | |
| B-3 | Beverly® Throatless Shears (Capacity: 14 / 18 ga.) (Blade length: 4-1/2") (Height less handle: 14") (Overall length: 9" (22.9 cm)) (Add to cart: Add To Cart) (Capacity: 10 / 14 ga.) (Blade length: 4-3/8") (Height less handle: 14") (Overall length: 10" (25 | 3 | |
| B-3-1 | Beverly® Throatless Shear Blades (Shroud height: B-1) (Add to cart: Add To Cart) (Shroud height: B-2) (Add to cart: Add To Cart) (Shroud height: B-3) (Add to cart: Add To Cart) | 1 | |
| B-MP90.045-60BL/1-3M | BLADE PROBE (RH SIDE) | 1 | |
| B10 | DEBURRING TOOL HSS BLADE B10 | 1 | |
| B100-151 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B100-152 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B100-153 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B100-154 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B105-400 | BLADE COVERS (set of 4) | 1 | |
| B105-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| B105-500 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| B117-400 | BLADE COVERS (set of 4) | 1 | |
| B117-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| B117-411 | BLADE COVERS (special: cold weather type, velcro @ trailing edge) (set of 4) | 1 | |
| B117-500 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| B117-610 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| B131-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| B131-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| B17-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 4) | 1 | |
| B18-120 | PROPELLOR/SPINNER COVERS, 2 blade Hamilton-Standard (set of 2) | 1 | |
| B18-121 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade Hamilton-Standard (set of 2) | 1 | |
| B18-125 | PROPELLOR/SPINNER COVERS, 3 Blade Hartzell (set of 2) | 1 | |
| B18-126 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade Hartzell (set of 2) | 1 | |
| B200-151 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B200-152 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B200-153 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B200-154 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B200-155 | INSULATED SPINNER COVER, 3 blade (set of 2) | 1 | |
| B208-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| B208-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| B24-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 4) | 1 | |
| B25-120 | PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| B26002-1 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 25 | |
| B2B-200 | BLADE COVERS (set of 3) | 1 | |
| B2B-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| B2K-120 | PROPELLOR/SPINNER COVERS, 5 blade (set of 2) | 1 | |
| B2K-125 | INSULATED PROPELLOR/SPINNER COVERS, 5 blade (set of 2) | 1 | |
| B300-155 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B300-156 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B300-157 | PROPELLOR/SPINNER COVERS, 5 blade (set of 2) | 1 | |
| B300-158 | INSULATED PROPELLOR/SPINNER COVERS, 5 blade (set of 2) | 1 | |
| B35-125 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| B35-126 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| B35-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| B35-132 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| B350-152 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B350-153 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B350-154 | PROPELLOR/SPINNER COVERS, 5 blade (set of 2) | 1 | |
| B350-155 | INSULATED PROPELLOR/SPINNER COVERS, 5 blade (set of 2) | 1 | |
| B350-156 | INSULATED PROPELLOR HUB COVERS, 4 blade (set of 2) | 1 | |
| B350-157 | INSULATED SPINNER HUB COVERS, 5 blade (set of 2) | 1 | |
| B36-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| B36-131 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| B36-132 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| B36-133 | INSULATED PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| B47-400 | BLADE COVERS (203", 206" & 215" lengths) (set of 2) | 1 | |
| B47-410 | BLADE COVERS (COLD WEATHER TYPE 203", 206" & 215" lengths) (set of 2) | 1 | |
| B47-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| B47-602 | TAIL ROTOR HUB & GEARBOX COVER (not blades) | 1 | |
| B47-603 | TAIL ROTOR BLADE TIE-DOWN | 1 | |
| B50-120 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| B50-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| B54001-53 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 19 | |
| B55-120 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| B55-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| B55-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B55-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B58-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B58-131 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B58-140 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B58-141 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B60-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B60-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B60-130 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B60-135 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B621M1068201 | PU-FOIL FOR ROTOR BLADE CUFF | 1 | |
| B661K1891- 053 | ROTOR BLADE FOLDING MAIN K | 1 | |
| B661K1891-053 | ROTOR BLADE FOLDING MAIN K | 1 | |
| B67-43001 | BLADE FOLD KIT (OPTIONAL) | 1 | |
| B67-43001-02 | BLADE FOLDING RACKS AND SUPPORT EQUIPMENT | 1 | |
| B717-100-01 | FAN BLADE BOLT TEMPLATE | 1 | |
| B73021 | RAT BLADE COVER (X2) TOOL | 1 | |
| B76-120 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| B76-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| B76-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B76-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B77-130 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| B77-135 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| B80-120 | PROPELLOR/SPINNER COVER, 3 blade (set of 2) | 1 | |
| B80-121 | INSULATED PROPELLOR/SPINNER COVER, 3 blade (set of 2) | 1 | |
| B90-151 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B90-152 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B90-153 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B90-154 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B901-165 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B901-166 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B901-170 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B901-171 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B95-120 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| B95-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| B95-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B95-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B99-165 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B99-166 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| B99-170 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| B99-171 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| BA3851271014 | BANDSAW BLADE | 1 | |
| BAA817734119 | BAND SAW BLADE | 1 | |
| BACC13AT3K18 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 1 | |
| BAH150003HSB | 12P HOOK SPARE BLADE SQZ150003 | 1 | |
| BAH18100PBLK | CARBODY BLADE 3-1/2 18 100/PK | 1 | |
| BAH24100PBLK | CARBODY BLADE 3-1/2 24 100/PK | 1 | |
| BAH32100PBLK | CARBODY BLADE 3-1/2 32 100/PK | 1 | |
| BAH3930018 | HACKSAWBLADE | 1 | |
| BAH3930024 | HACKSAWBLADE | 1 | |
| BAH625DROP | SPAREBLADE DROP FOR 625 | 1 | |
| BAH625PEAR | SPAREBLADE PEAR FOR 625 | 1 | |
| BAH625ROUND | SPAREBLADE ROUND FOR 625 | 1 | |
| BAH825571807 | BANDSAW BLADE | 1 | |
| BAHBE699015K | TORX PLUS BLADE IP15 | 1 | |
| BAJ-120 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| BAJ-121 | PROPELLOR/SPINNER COVERS, MT 5 blade (set of 2) | 1 | |
| BAJ-125 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| BAJ-126 | INSULATED PROPELLOR/SPINNER COVERS, MT 5 blade (set of 2) | 1 | |
| BAJ-128 | INSULATED SPINNER COVERS only, MT 5 blade (set of 2) | 1 | |
| BALANCE-WEIGHTS | VARIOUS BAL. WEIGHTS FOR FAN BLADES | 1 | |
| BAS40021 | REPL BLADES 2PK BAS40001/SCKS1 | 1 | |
| BAT-157-24 | Metal Cutoff Wheels - Blade Diameter: 1-1/2", No. of Teeth: 44 | 1 | |
| BAT-157-26 | Metal Cutoff Wheels - Blade Diameter: 1-1/2", No. of Teeth: 60 | 1 | |
| BAT-157-33 | Kett Panel Saw Blades - 1-3/4" x 30 Teeth | 1 | |
| BAT-157-34 | Kett Panel Saw Blades - 1-3/4" x 44 Teeth | 1 | |
| BAT-157-36 | Kett Panel Saw Blades - 1-3/4" x 60 Teeth | 1 | |
| BAT-157-44 | Metal Cutoff Wheels - Blade Diameter: 2", No. of Teeth: 44 | 1 | |
| BAT-157-46 | Metal Cutoff Wheels - Blade Diameter: 2", No. of Teeth: 60 | 1 | |
| BAT-157-53 | Kett Panel Saw Blades - 2" x 30 Teeth | 1 | |
| BAT-157-54 | Kett Panel Saw Blades - 2" x 44 Teeth | 1 | |
| BAT-157-56 | Kett Panel Saw Blades - 2" x 60 Teeth | 1 | |
| BAT-S2311 | 4" Diamond Coated Saw Blade with 3/8" Arbor Hole - For Composites | 1 | |
| BCD-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BCD-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| BCIT-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BCIT-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BCIT-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BCIT-135 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BCM-105 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BCM-106 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BCT-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BCT-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BD4-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BD4-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BDEC-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BDEC-121 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BDEC-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BDEC-131 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BDG-105 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| BDG-107 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| BE69900000402673 | FIXET PRESET ERGO JM TORQUE SCREWDRIVER WITH TORX AND TORX PLUS BLADE | 1 | |
| BEA-105 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BEA-106 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BEA-107 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BEA-108 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BFB-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BFB-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BH2-150 | PROPELLOR/SPINNER COVER, 2-blade | 1 | |
| BH2-155 | INSULATED PROPELLOR/SPINNER COVER, 2-blade | 1 | |
| BH4-150 | PROPELLOR/SPINNER COVER, 2-blade | 1 | |
| BH4-155 | INSULATED PROPELLOR/SPINNER COVER, 2-blade | 1 | |
| BH552 | Starrett B4-4R 4IN BLADE ONLY | 1 | |
| BH557 | Starrett CB4-4R 4IN BLADE ONLY | 1 | |
| BH567 | Starrett B6-4R 6IN BLADE ONLY | 1 | |
| BH577 | Starrett CB6-4R 6IN BLADE ONLY | 1 | |
| BH582 | Starrett CB33J-4R 6IN BLADE ONLY | 1 | |
| BH587 | Starrett B12-4R 12IN BLADE ONLY | 1 | |
| BH597 | Starrett CB12-4R 12IN BLADE ONLY | 1 | |
| BH607 | Starrett CB12-16R 12IN BLADE ONLY | 1 | |
| BH612 | Starrett B18-4R 18IN BLADE ONLY | 1 | |
| BH617 | Starrett B18-16R 18IN BLADE ONLY | 1 | |
| BH632 | Starrett B24-4R 24IN BLADE ONLY | 1 | |
| BH637 | Starrett B24-16R 24IN BLADE ONLY | 1 | |
| BH642 | Starrett CB24-4R 24IN BLADE ONLY | 1 | |
| BH657 | Starrett CB36-4R 36IN BLADE ONLY | 1 | |
| BH665 | Starrett CB48-4R 48IN BLADE ONLY | 1 | |
| BH679 | Starrett B150-35 150MM BLADE ONLY | 1 | |
| BH682 | Starrett B150-36 150MM BLADE ONLY | 1 | |
| BH687 | Starrett B300-35 300MM BLADE ONLY | 1 | |
| BH692 | Starrett CB300-35 300MM BLADE ONLY | 1 | |
| BH697 | Starrett B600-35 600MM BLADE ONLY | 1 | |
| BH702 | Starrett CB600-35 600MM BLADE ONLY | 1 | |
| BH712 | Starrett CB150-36 150MM BLADE ONLY | 1 | |
| BH717 | Starrett B300-36 300MM BLADE ONLY | 1 | |
| BH722 | Starrett CB300-36 300MM BLADE ONLY | 1 | |
| BH727 | Starrett B600-36 600MM BLADE ONLY | 1 | |
| BH732 | Starrett CB600-36 600MM BLADE ONLY | 1 | |
| BJKRZ-710 | 1 BOX 100 RAZOR BLADES | 1 | |
| BK117-15004 W6 | BLADE BUSHING TOOL SET | 1 | |
| BK392 | Starrett B33J-4R BLADE ONLY | 1 | |
| BKD-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BKD-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BL030-6 | .030" Thick, 6" long, Straight Blade Probe 50-500Khz, Microdot | 1 | |
| BL045-10 | Straight Blade Probe .045" thick, 10" Long, Microdot Connector | 1 | |
| BL045-15 | Straight Blade Probe .045" thick, 15" Long, Microdot Connector | 1 | |
| BL045-6 | Straight Blade Probe .045" thick, 6" Long, Microdot Connector | 2 | |
| BL050-5-1 | .050" Thick, 5" long, Straight Blade Probe 100-200Khz, Microdot, 2" Handle | 1 | |
| BL060-4 | STRAIGHT BLADE PROBE | 1 | |
| BL060-6 | Straight Blade Probe .060" thick, 6" Long, Microdot Connector | 1 | |
| BL060-7 | Straight Blade Probe .060" thick, 7" Long, Microdot Connector | 1 | |
| BL060-9 | .060" Straight Blade Probe 9"WL shielded at least 5.315 in shaft not including handle | 1 | |
| BL090-6 | Straight Blade Probe .090" thick, 6" Long, Microdot Connector | 1 | |
| BL345-6 | BLADE PROBE, 30° x .045" Thick, 50-500KHz, 6" Long, Microdot connector | 1 | |
| BL360-6 | BLADE PROBE | 1 | |
| BL390-6 | BLADE PROBE, 30° x .090" Thick, 50-500KHz, 6" Long, Microdot connector | 1 | |
| BL445-6 | BLADE PROBE, 45° x .045" Thick, 50-500KHz, 6" Long, Microdot connector | 2 | |
| BL455-6 | BLADE PROBE, 45° x .055" Thick, 50-500KHz, 6" Long, Microdot connector | 1 | |
| BL460-6 | BLADE PROBE, 45° x .060" Thick, 50-500KHz, 6" Long, Microdot connector | 1 | |
| BL490-6 | BLADE PROBE | 1 | |
| BL645-6 | BLADE PROBE, 60° x .045" Thick, 50-500KHz, 6" Long, Microdot connector | 1 | |
| BL660-6 | BLADE PROBE | 1 | |
| BL945-6 | BLADE PROBE, 90° x .045" Thick, 50-500KHz, 6" Long, Microdot connector | 1 | |
| BL945-9LH/2M | BLADE PROBE (LH SIDE) | 1 | |
| BL945-9RH/2M | BLADE PROBE RIGHT HAND, 90° X .045" THICK, 1-3MHZ, 9" LONG (6" WORKING LENGTH), MICRODOT CONNECTOR | 1 | |
| BL960-4 | BLADE PROBES | 1 | |
| BL960-6 | BLADE PROBE, 90° x .060" Thick, 50-500KHz, 6" Long, Microdot connector | 1 | |
| BL990-6 | BLADE PROBE, 90° x .090" Thick, 50-500KHz, 6" Long, Microdot connector | 1 | |
| BLADE TIP GRINDER - HP COMPRES | BLADE TIP GRINDER - HP COMPRESSOR ROTOR | 1 | |
| BLC-60-AA | H-60 MAIN ROTOR BLADE LIFT CRADLE | 1 | |
| BM610003 | PROPELLER BLADE BOX | 1 | |
| BMUS-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BMUS-151 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BMUS-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BMUS-156 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BNI-120 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| BNI-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| BNI-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| BNI-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| BNM15600-01 | RAGHORN, FIXED BLADE, DROP POI | 1 | |
| BRE-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BRE-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| BRE-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BRE-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| BRM-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| BRM-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| BS1010 S10 | DEBURRING BLADES (SET OF 10) | 1 | |
| BSFB-3/8-14 | SAW BLADES | 1 | |
| BSH-150 | PROPELLOR/SPINNER COVER, 2-blade | 1 | |
| BSH-155 | INSULATED PROPELLOR/SPINNER COVER, 2-blade | 1 | |
| BSP-115 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BSP-117 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| BT13-120 | PROPELLOR COVER, 2 blade | 1 | |
| BT13-125 | INSULATED PROPELLOR COVER, 2 blade | 1 | |
| BT13-130 | PROPELLOR COVER, 3 blade | 1 | |
| BT13-135 | INSULATED PROPELLOR COVER, 3 blade | 1 | |
| BVK-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BVK-121 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| BVK-125 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| BVK-126 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| C-130 FIXTURE | Custom C-130 Blade Inside Bushing Probe Fixture per Drawing No. 201757983. Material: ABS Plastic machined not 3D Printed. | 1 | |
| C07007-19 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 19 | |
| C07007-21 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 7 | |
| C07007-22 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 1 | |
| C10-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| C10-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| C12-BC1211 | COUNTERSINK BLADE | 1 | |
| C12006-1 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 4 | |
| C12006-14 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 7 | |
| C130-183 | PROP BLADE COVER, padded sleeve | 1 | |
| C205-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| C205-115 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| C205-116 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| C205-117 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| C21003-133 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 12 | |
| C21003-134 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 6 | |
| C21003-135 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 12 | |
| C21003-155 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 8 | |
| C21003-156 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 8 | |
| C21003-160 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 10 | |
| C21003-161 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 8 | |
| C21003-80 | PULLER-SPACERS, FAN BLADE | 6 | |
| C21003-81 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 6 | |
| C21003-82 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 3 | |
| C21006-1 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 13 | |
| C21006-7 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 10 | |
| C212-170 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| C212-175 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| C212-180 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| C212-185 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| C22005-22 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 13 | |
| C23-125 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| C23-126 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| C232-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| C232-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| C232-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| C232-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| C26004-32 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 11 | |
| C26004-33 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 14 | |
| C26004-73 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 5 | |
| C26004-74 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 4 | |
| C26004-78 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 2 | |
| C26004-79 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 1 | |
| C26004-83 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 11 | |
| C26004-84 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 9 | |
| C26005-1 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 17 | |
| C32034-343 | TOOL - ASSISTANCE, FAN BLADE, RETAINING RING | 7 | |
| C350-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| C350-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| C350-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| C350-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| C42-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| C42-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| C42-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| C42-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| C46-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| C46-121 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| C46-125 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| C46-126 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| C57007 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 1 | |
| C57007 | Dispatch Tool - Cover Plate. Winglet Lower Blade | 1 | |
| C57007-1 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 2 | |
| C57007-25 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 5 | |
| C57007-36 | DISPATCH TOOL - COVER PLATE, WINGLET LOWER BLADE | 3 | |
| C621G1001101 | BLADE POLE | 1 | |
| C622A2006602 | 1 PIN BLADE | 1 | |
| C7304 | PROBE: TWIN BNC V2500 FAN BLADE L/E KIT | 1 | |
| C78005-36 | BLADE TRACKER | 3 | |
| C90A-160 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| C90A-161 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| C90A-165 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| C90A-166 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| C90B-165 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| C90B-166 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| C90B-170 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| C90B-171 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| C9240-8 | FAN BLADE SPACER REMOVAL TOOL | 1 | |
| CA8-60 | 4 BLADED TEST CLUB | 1 | |
| CA80400-0003 | COVER PROPLLER BLADE | 1 | |
| CALL-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CALL-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CAM-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CAM-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CC11-120 | PROPELLOR/SPINNER COVER (w/spinner), 2 blade | 1 | |
| CC11-121 | INSULATED PROPELLOR/SPINNER COVER (w/spinner), 2 blade | 1 | |
| CC18-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CC18-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CE04-0429-009 | SUPPORT FOR BLADES | 1 | |
| CE4-1252 | PROBE ECI 1-6 BLADE | 1 | |
| CE4-1253 | PROBE ECI 1-6 BLADE | 1 | |
| CE4-1267 | GAGE INSPECT BLADE | 1 | |
| CFMCP5061 | TEMPORARY MARKER , FAN BLADE | 1 | |
| CG2-400 | BLADE COVERS (set of 3) | 1 | |
| CG2-401 | BLADE COVERS, w/ tie downs (set of 3) | 1 | |
| CG2-402 | BLADE COVERS, w/hail protection, w/ tie downs (set of 3) | 1 | |
| CG2-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| CG2-411 | BLADE COVERS (COLD WEATHER TYPE), w/ hail protection (set of 3) | 1 | |
| CG2-412 | BLADE COVERS (COLD WEATHER TYPE), w/ hail protection w/ tie-downs (set of 3) | 1 | |
| CG2-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| CG240-8 | FAN BLADE SPACER REMOVAL TOOL | 4 | |
| CG240-9 | ENGINE CFM56 FAN BLADE REMOV. TOOL | 4 | |
| CH47-300 | BLADE COVERS (set of 6) | 1 | |
| CH47-310 | BLADE COVERS, cold weather type (set of 6) | 1 | |
| CH77-400 | BLADE COVERS (set of 3) | 1 | |
| CH77-401 | BLADE COVERS, w/ tie downs (set of 3) | 1 | |
| CH77-402 | BLADE COVERS, w/hail protection, w/ tie downs (set of 3) | 1 | |
| CH77-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| CH77-411 | BLADE COVERS (COLD WEATHER TYPE), w/ hail protection (set of 3) | 1 | |
| CH77-412 | BLADE COVERS (COLD WEATHER TYPE), w/ hail protection w/ tie-downs (set of 3) | 1 | |
| CH77-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| CI120200GSL | ANTENNA BLADE | 1 | |
| CJ125-6 | ENGINE CFM56 FAN BLADE REMOV. TOOL | 3 | |
| CMP-V2500 | FAN BLADE CLAMP SET | 1 | |
| CMS004829 | BLADE OF TAPE CUTTING – OLD P/N: CMS000012 | 1 | |
| COM-115 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| COM-120 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| COOT-149 | PROPELLOR COVER, 2 blade | 1 | |
| COOT-150 | PROPELLOR COVER, 3 blade | 1 | |
| COR-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| COR-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| COUNTER | FAN BLADE COUNTER TOOL | 1 | |
| CP7901 | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocati | 1 | |
| CP7901K | Chicago Pneumatic® Reciprocating Saw (Description: 5-Pack Reciprocating Saw Blades - 18 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocating Saw Blades - 24 Teeth Per Inc) (Add to cart: Add To Cart) (Description: 5-Pack Reciprocati | 1 | |
| CR052 | THREAD PITCH GAUGE – 52 BLADES | 1 | |
| CR4-1088 | BLADE MASTER HPC 5TH STAGE | 1 | |
| CR4-1097 | BLADE MASTER HPC 6TH STAGE | 1 | |
| CR4-1137 | BLADE MASTER HPC 7TH STAGE | 1 | |
| CRK1105K | ENDORSER BLACK BLADE | 1 | |
| CRK2388 | SPEW FIXD BLADE RAZOR EDGE | 1 | |
| CRK2861 | HUNT'N FISCH FXD BLADE KNIFE | 1 | |
| CRK4200 | WALKER BLADE LOCK | 1 | |
| CRK5470 | IKOMA FOSSIL PLAIN BLADE | 1 | |
| CRK6450D2 | DRIFTER BLACK W/SILVER BLADE | 1 | |
| CRK7097RK | CEO RED HANDLE BLACK BLADE | 1 | |
| CRK7097RX | CEO RED HANDLE SATIN BLADE | 1 | |
| CRKM1601KS | M16 STAINLESS BLK OXIDE BLADE | 1 | |
| CSA10CRB | REPAIR BLADE | 1 | |
| CSR-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CSR-160 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CST-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CST-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CST-2820 | BLADE ANGLE PROTECTOR | 1 | |
| CT4-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| CT4-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| CT4-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| CT4-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| CT923-4 | Champion Aerospace CT-923-4 Cutter Blade | 1 | |
| CTRS126GP | 5PK 12IN GP BLADE 6TPI | 1 | |
| CTRS618MCBSF | 50PK BLADE 6IN METAL 18TPI | 1 | |
| CTRS624MC | 6IN SAW BLADES 24TPI 5PK | 1 | |
| CTRS624MCBSF | 50PK BLADE 6IN 24TPA | 1 | |
| CTRS658DB | 5PK 6IN DEMO BLADE 5/8TPI | 1 | |
| CTRS658GP | 5PK 6IN GP BLADE 5/8TPI | 1 | |
| CTRS67WB | 5PK 6" WOOD BLADE 7TPI | 1 | |
| CTSW-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CTSW-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| CTSW-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| CTSW-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| CUL-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CUL-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| CX4-150 | PROPELLOR/SPINNER COVER, 2 blade, CX-4 Model | 1 | |
| CX4-151 | PROPELLOR/SPINNER COVER, 2 blade, CX-5 Model | 1 | |
| CX4-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade, CX-4 Model | 1 | |
| CX4-156 | INSULATED PROPELLOR/SPINNER COVER, 2 blade, CX-5 Model | 1 | |
| CZ082 | Starrett 486P-1 BLADE TYPE MIC | 1 | |
| CZ092 | Starrett 486P-2 BLADE TYPE MIC | 1 | |
| CZ102 | Starrett 486P-3 BLADE TYPE MIC | 1 | |
| CZ112 | Starrett 486P-4 BLADE TYPE MIC | 1 | |
| CZ122 | Starrett 486P-5 BLADE TYPE MIC | 1 | |
| CZ132 | Starrett 486P-6 BLADE TYPE MIC | 1 | |
| CZ134 | Starrett 486P-7 BLADE TYPE MIC | 1 | |
| CZ136 | Starrett 486P-8 BLADE TYPE MIC | 1 | |
| CZ138 | Starrett 486P-9 BLADE TYPE MIC | 1 | |
| CZ139 | Starrett 486P-10 BLADE TYPE MIC | 1 | |
| CZ140 | Starrett 486P-11 BLADE TYPE MIC | 1 | |
| CZ142 | Starrett 486MP-25 BLADE TYPE MIC | 1 | |
| CZ152 | Starrett 486MP-50 BLADE TYPE MIC | 1 | |
| CZ162 | Starrett 486MP-75 BLADE TYPE MIC | 1 | |
| CZ172 | Starrett 486MP-100 BLADE TYPE MIC | 1 | |
| CZ182 | Starrett 486MP-125 BLADE TYPE MIC | 1 | |
| CZY-240 | PROPELLOR/SPINNER COVER, 2 blade, Mark III Models | 1 | |
| CZY-245 | INSULATED PROPELLOR/SPINNER COVER, 2 blade, Mark III Models | 1 | |
| CZY-250 | PROPELLOR/SPINNER COVER, 2 blade, Mark IV Models | 1 | |
| CZY-255 | INSULATED PROPELLOR/SPINNER COVER, 2 blade, Mark IV Models | 1 | |
| D-5945 | FEEDBACK COLLAR RETRACTOR TOOL ON THE PROPELLER. (THREE AND FOUR BLADE PROPELER) | 4 | |
| D12530-001 | TUBE CUTTER BLADE | 12 | |
| D144-T-3100 | SLITTING GUN WITH CUTTER, RPM : 3300, BLADE DIA. : 2.5" | 1 | |
| D412-695-011 | BLADE FOLDING KIT | 3 | |
| D535P0002101 | BLADE & TAIL BOOM STAND | 1 | |
| D55-130 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| D55-131 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| D55-135 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| D55-136 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| D5945 | FEEDBACK COLLAR RETRACTOR,4 BLADE MCCAULEY | 4 | |
| D621M1002105 | MAIN ROTOR BLADE ASSY | 1 | |
| D641M1001103 | TAIL ROTOR BLADE ASSY | 1 | |
| D641P4001101 | TAIL ROTOR BLADES RIGGING DEVICE | 1 | |
| D661P20A2101 | MAIN ROTOR BLADE FOLDING KIT | 1 | |
| DA20-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DA20-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DA40-140 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DA40-145 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DA40-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DA40-155 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DA42-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| DA42-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| DA50-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DA50-121 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DA50-125 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| DA50-126 | INSULATED PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| DA62-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| DA62-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| DA7080 | FILLER FIXTURE FOR BLADE BOX | 1 | |
| DAPT 60-0021-00 | BLADE BATS | 1 | |
| DAPT02-0071-00 | BLADE BEARING TRANSPORT CLAMP | 1 | |
| DAPT02-0071−00 | BLADE BEARING TRANSPORT CLAMP | 1 | |
| DAPT02−0071−00 | BLADE BEARING TRANSPORT CLAMP | 1 | |
| DAPT60-0021-00 | PROPELLER BLADE BATS | 1 | |
| DAPT60-0081-00 | BLADE SUPPORT LONG | 2 | |
| DAPT60-0126-00 | TOOL-PROP PITCH CHANGE (BLADE BAT) | 8 | |
| DAPT60-0126-00-IAS | BLADE PITCH TURNING BAT ( 2 ea required ) | 1 | |
| DAPT60-0126-00IAS | TOOL-PROP PITCH CHANGE (BLADE BAT) | 1 | |
| DAPT60-0223-00 | BLADE RING RETAINERS | 7 | |
| DAPT60-126-00 | BLADE BAT | 1 | |
| DAPT60−0115−00 | PROP BLADE BEARING WRENCH | 10 | |
| DAPT60−0116−00 | PROP BLADE RING NUT | 6 | |
| DAPT60−0126−00 | BLADE BAT | 8 | |
| DAPT60−0346−00 | PROP BLADE BALL INSTALL QTY 14 | 9 | |
| DAPT65-0079-00 | SLING-PROP BLADE | 5 | |
| DAPT65-0079-00-IAS | PROP BLADE SLING | 1 | |
| DAPT65-0079-00IAS | SLING-PROP BLADE | 1 | |
| DAPT65−0079−00 | BLADE SLING | 5 | |
| DAPT72-0025-00 | DOLLY / RACK BLADE STORAGE | 3 | |
| DAPT72-0025-00-IAS | BLADE STORAGE DOLLY | 1 | |
| DAPT72-0025-00IAS | DOLLY / RACK BLADE STORAGE | 1 | |
| DAPT72−0025−00 | DOLLY/RACK − BLADE STORAGE (SERIES 400) | 3 | |
| DAV-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DAV-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DBS-1100-7 | Replacement Blade for .125 and .250 Band Tools | 1 | |
| DBS-2100-MB | Replacement Movable Blade for .250 Band Tools | 1 | |
| DBS-2100-SB | Replacement Stationary Blade for .250 Band Tools | 1 | |
| DBS-2200-SB | Replacement Stationary Blade for .125 Band Tools | 1 | |
| DC3-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| DC3-121 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| DDPS45 | EXTRA HEAVY DUTY DIAMOND BLADE 4 1/2" | 1 | |
| DEF-400 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DEF-405 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| DEF-410 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DEF-415 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| DEN-122 | PROP TIE-DOWN/EXHAUST COVER SET, 5 blade (set of 4) | 1 | |
| DEN-123 | PROP TIE-DOWNS, 5 blade (set of 2) | 1 | |
| DEN-142 | PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| DEN-144 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| DES004 | SCRAPER BLADE & HOLDER KIT W/PNEUMATIC TOOL | 1 | |
| DF030-7 | FAN BLADE ASSEMBLY | 1 | |
| DFX608AB | REPL BLADES 10PK 16MM ANGLED | 1 | |
| DFX608L | REPL BLADE 10PK 20MM LARGE | 1 | |
| DFX608M | REPL BLADE 10 PK 16MM MEDIUM | 1 | |
| DFX608S | REPL BLADES 10PK 12MM SMALL | 1 | |
| DGA-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DGA-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| DH1-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DH1-111 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DH2-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DH2-121 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DH2-125 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DH2-126 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DH3-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DH3-125 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DH3-130 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| DH3-135 | INSULATED PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| DH4-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| DH4-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| DH6-147 | INSULATED PROPELLOR HUB COVERS, 3 blade (set of 2) | 1 | |
| DH6-148 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| DH6-149 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| DH6-155 | INSULATED PROPELLOR HUB COVERS, 4 blade (set of 2) | 1 | |
| DH6-156 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| DH6-157 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| DH7-120 | PROPELLOR/SPINNER COVERS, 4 blade (set of 4) | 1 | |
| DH7-125 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 4) | 1 | |
| DH8-115 | PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| DH8-120 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| DH8-125 | PROPELLOR/SPINNER COVERS, 6 blade (set of 2) | 1 | |
| DH8-126 | INSULATED PROPELLOR/SPINNER COVERS, 6 blade (set of 2) | 1 | |
| DH8-127 | INSULATED PROPELLOR HUB COVERS, 4 blade (set of 2) | 1 | |
| DH8-128 | INSULATED PROPELLOR HUB COVERS, 6 blade (set of 2) | 1 | |
| DH82-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DH82-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DIF-219 | BLADE MASTER HPC | 1 | |
| DIM-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DIM-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DLT-1100-33 | LaceLok Cutting Blade Cover | 1 | |
| DLT-1100-SA5 | LaceLok® Cutting Blade | 1 | |
| DM C50-2 | VHF COMM BLADE/BNC C | 6 | |
| DM540 | Starrett 786P-1 ELECT BLADE MIC | 1 | |
| DM541 | Starrett 786P-2 ELECT BLADE MIC | 1 | |
| DM542 | Starrett 786P-3 ELECT BLADE MIC | 1 | |
| DM543 | Starrett 786P-4 ELECT BLADE MIC | 1 | |
| DM544 | Starrett 786P-5 ELECT BLADE MIC | 1 | |
| DM545 | Starrett 786MEP-25 ELECT BLADE MIC | 1 | |
| DM546 | Starrett 786MEP-50 ELECT BLADE MIC | 1 | |
| DM547 | Starrett 786MEP-75 ELECT BLADE MIC | 1 | |
| DM548 | Starrett 786MEP-100 ELECT BLADE MIC | 1 | |
| DM549 | Starrett 786MEP-125 ELECT BLADE MIC | 1 | |
| DO27-200 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DO27-205 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DQ25 | BALANCER - JT9D TURBINE BLADE_[DQ-25] | 1 | |
| DQ50 | BALANCER-JT9D FAN BLADE_[DQ-50] | 1 | |
| DSK-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DSK-121 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| DSK-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DSK-131 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DW1-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| DW1-155 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| E-33324-1 | FAN BLADE TOOLING | 1 | |
| E120-200 | BLADE COVERS (std type) (set of 3) | 1 | |
| E120-201 | BLADE COVERS w/tie-down add-on (set of 3) | 1 | |
| E120-210 | BLADE COVERS (cold weather type) (set of 3) | 1 | |
| E120-211 | BLADE COVERS cold weather type w/tie-down add-on (set of 3) | 1 | |
| E120-230 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| E130-400 | BLADE COVERS (set of 3) | 1 | |
| E130-405 | BLADE COVERS, cold weather type (set of 3) | 1 | |
| E130-410 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| E130-415 | BLADE TIE-DOWNS w/semi-rigid upper & lower surfaces (set of 3) | 1 | |
| E135-600 | BLADE COVERS (STANDARD DESIGN) (set of 4) | 1 | |
| E135-610 | BLADE COVERS (COLD WEATHER DESIGN) (set of 4) | 1 | |
| E135-611 | BLADE COVERS, special detail for fixed static wick (Cold Weather Type) (set of 4) | 1 | |
| E135-615 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| E135-620 | BLADE TIE-DOWNS w/Telescoping Attachment Handle (set of 5) | 1 | |
| E145-200 | BLADE COVERS, special detail for fixed static wick (set of 4) | 1 | |
| E145-205 | BLADE COVERS, special detail for fixed static wick (Cold Weather Type) (set of 4) | 1 | |
| E145-220 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| E145-221 | BLADE TIE-DOWNS, w/telescoping attachment handle (set of 5) | 1 | |
| E145-315 | ROTOR HUB COVER, Extended to cover counterweights, Folded blade design | 1 | |
| E155-300 | BLADE COVERS (set of 5) | 1 | |
| E155-310 | BLADE COVERS (COLD WEATHER TYPE) (set of 5) | 1 | |
| E155-320 | BLADE TIE-DOWNS (fabric type) (set of 5) | 1 | |
| E162-200 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| E162-400 | BLADE COVERS (set of 2) | 1 | |
| E1K-150 | PROPELLOR/SPINNER COVER, 5 blade | 1 | |
| E1K-152 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| E3-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| E3-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| E300-110 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| E300-115 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| E350-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| E350-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| E400-120 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| E400-125 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| E540-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| E540-155 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| E7510003 | BOX OF 5 GR BOX(100 STRAIGHT BLADES) | 1 | |
| E90-200 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| E90-400 | BLADE COVERS (set of 2) | 1 | |
| EA1-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| EA1-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| EAA-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| EAA-121 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| EAC0078G75A | BLADE PROT BEAD BRK YEL | 1 | |
| ECA060M118 | Blade Weldment | 1 | |
| ECF-40002 | M/R BLADE CHECK & FILL UNIT | 1 | |
| ECSPM052 | FLEX BLADE LIGHT | 1 | |
| EFX-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| EFX-155 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| EH1009 | BLADE MASTER HPC | 1 | |
| ELT-150 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| ELT-152 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| EMB00053-001 | COVER, RAT BLADE | 12 | |
| EMER-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| EMER-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| ENENCB3241 | NUT SPLITTER BLADE | 1 | |
| ENENCB4150 | NUT SPLITTER BLADE | 1 | |
| ENENCB5060 | NUT SPLITTER BLADE | 1 | |
| ENENCB6075 | NUT SPLITTER BLADE | 1 | |
| ENEWCB1000 | BLADE FOR WMC1000 | 1 | |
| ENEWCB1580 | BLADE FOR WMC3380/WHC3380 | 1 | |
| ENEWCB2000 | BLADE FOR WMC2000/WHC2000 | 1 | |
| ENEWCB3380 | BLADE FOR WMC3380/WHC3380 | 1 | |
| ENEWCB4000 | BLADE FOR WHC4000 | 1 | |
| ENEWCB750 | CUTTER BLADE | 1 | |
| ENG-110 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| ENG-115 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| EP0CHXT | INSTRUMENT - ULTRAS0NIC INSPECTI0N, FAN BLADES | 1 | |
| ERC-115 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| ERC-120 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| ESP-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| ESP-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| ESQ-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| ESQ-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| ESQ-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| ESQ-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| ET002 | Brantly International B-2 Main Rotor Blade root skin inspection Fig1 calibration standard | 1 | |
| ET28439 | BLADE MASTER HPC | 1 | |
| EUR-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| EUR-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| EUR-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| EUR-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| EXP-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| EXP-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| EXP-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| EXP-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| EZRMSRPACK | REPL. BLADES (5PK) | 1 | |
| F149-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| F149-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| F1R-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| F1R-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| F1R-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| F1R-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| F24-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| F24-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| F27-120 | PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| F27-125 | INSULATED PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| F280-400 | BLADE COVERS (set of 3) | 1 | |
| F280-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| F280-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| F28A-400 | BLADE COVERS (set of 3) | 1 | |
| F28A-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| F28A-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| F28A-601 | TAIL ROTOR BLADE TIE-DOWN | 1 | |
| F28C-400 | BLADE COVERS (set of 3) | 1 | |
| F28C-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 3) | 1 | |
| F28C-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| F28C-501 | BLADE TIE-DOWNS, PADDED (set of 3) | 1 | |
| F28C-601 | TAIL ROTOR BLADE TIE-DOWN | 1 | |
| F4F-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| F4F-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| F4U-110 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| F4U-115 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| F4U-120 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| F4U-125 | INSULATED PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| F70330-19 | Support blade assy | 3 | |
| F7F-150 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| F7F-155 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| F80175-1 | Pressure Test Door Assembly - Center Blader Wing Tank | 1 | |
| F8F-120 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| F8F-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FAL-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FAL-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FAN56-3 | Fan Blade Trolley CFM 56-3 | 1 | |
| FAN56-5 | Fan Blade Trolley CFM 56-5 | 1 | |
| FAN56-7/V2500 | Fan Blade Trolley CFM 56-7 & V2500 | 1 | |
| FANBLADESANDINGKIT | FAN BLADE SANDING KIT (EMB) | 1 | |
| FANBLADETRANSB0X | FAN BLADE TRANSIT BOX ( TRENT ) | 1 | |
| FANBLADEWAGEN | FAN BLADE TROLLEY A319 | 1 | |
| FANLUBEFULLKIT | FAN BLADE REMOVAL TOOL KIT | 1 | |
| FB-300A | GAUGE, FEELER, BENT BLADES, 25 BLADES | 1 | |
| FB-325A | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 8 | |
| FB-335 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 6 | |
| FB300A | GAUGE, FEELER, BENT BLADE, 25 BLADES (.006" THRU .030") | 1 | |
| FB310B | GAUGE, FEELER, U.S./METRIC, 13 BLADES (.001IN THRU .015IN) | 4 | |
| FB325A | GAUGE, FEELER, U.S./METRIC, 25 BLADES | 8 | |
| FB335 | Gauge, Feeler, U.S./Metric, 35 blades (.0015in thru .035in) | 6 | |
| FB3355 | GAGE,THICKNESS:STRAIGHT,3.312" BLADE LG | 1 | |
| FB336 | GAGE BLADE SET RED INTERCH | 1 | |
| FB336BLK | GAGE BLADE SET INTERCH DRK BLK | 1 | |
| FB336DT | GAGE BLADE SET INTERCH DRKTTNM | 1 | |
| FB336GRN | GAGE BLADE SET GREEN INTERCH | 1 | |
| FB336HV | GAGE BLADE SET HI VIS | 1 | |
| FB336ORG | GAGE BLADE SET ORANGE INTERCH | 1 | |
| FBA-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| FBA-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FBBA325 | OFFSET 25 BLADE 45 DEG | 1 | |
| FBBA325GRN | OFFSET 25 BLADE 45 DEG GRN | 1 | |
| FBBA325HV | OFFSET 25 BLADE 45 DEG HIVIS | 1 | |
| FBBA325ORG | OFFSET 25 BLADE 45 DEG ORG | 1 | |
| FBL325A | FEELER GAUGE 25 BLADE LONG | 2 | |
| FBM320 | FEELER GAUGE 20BLADES 0.05 TO 1MM | 3 | |
| FBP-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FBP-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FBSG325 | STEP GROUND 25 BLADE SET | 1 | |
| FBSG325GRN | STEP GROUND 25 BLADE SET GRN | 1 | |
| FBSG325HV | STEP GROUND 25 BLADE SET HIVIS | 1 | |
| FBSG325ORG | STEP GROUND 25 BLADE SETORG | 1 | |
| FBSM325 | STR 25 BLADE METRIC SET | 1 | |
| FBSM325GRN | STR 25 BLADE METRIC SET GRN | 1 | |
| FBSM325HV | STR 25 BLADE METRIC SET HIVIS | 1 | |
| FBSM325ORG | STR 25 BLADE METRIC SET ORG | 1 | |
| FBST338 | STRAIGHT 38 BLADE SET | 1 | |
| FBST338GRN | STRAIGHT 38 BLADE SET GRN | 1 | |
| FBST338HV | STRAIGHT 38 BLADE SET HIVIS | 1 | |
| FBST338ORG | STRAIGHT 38 BLADE SET ORG | 1 | |
| FCPT-THDM-G020 | FCPT-THDM-G020;Guide THDMC 28876 Size 13 2 MT Blades Receptacle for Sidewinder | 1 | |
| FCPT-THDM-G021 | FCPT-THDM-G021;Guide THDMP 28876 Size 13 2 MT Blades Plug for Sidewinder | 1 | |
| FCPT-THDM-G040 | FCPT-THDM-G040;Guide THDMC 28876 Size 15 4 MT Blades Receptacle for Sidewinder | 1 | |
| FCPT-THDM-G041 | FCPT-THDM-G041;Guide THDMP 28876 Size 15 4 MT Blades Plug for Sidewinder | 1 | |
| FEELERGAUGE-25 BLADES | FEELER GAUGE25 BLADES(.0015"-.035") | 1 | |
| FFL-120 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| FFL-125 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| FH11-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| FIMP-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FIMP-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FIMP-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FIMP-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FK12-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FK12-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FK14-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FK14-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FK9-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FK9-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FLCN-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FLCN-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FLS-130 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| FLT-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FLT-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FMC-2000BL | BLADE, FOR FMC-2000 MEDIA CUTTER | 1 | |
| FMF05-35-51000 | PROPELLER BLADE COVER | 1 | |
| FST-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| FST-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FST-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| FST-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| FT1000 | BLADE MASTER HPC | 1 | |
| FUN-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| FUN-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| FXT-15147 | BLADE LOCKING TOOL | 1 | |
| FZ01636 | REM TOOL (FAM BLADE) | 1 | |
| G1-120 | PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| G1-125 | INSULATED PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| G109-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| G109-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| G115-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| G115-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| G120-120 | PROPELLOR/SPINNER COVER, 2 blade, 120A model | 1 | |
| G164-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| G164-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| G21-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| G44-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| G44-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| G44-126 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| G518217 | PROTECTOR BLADE ANGLE | 1 | |
| G600-100030-143 | PROTECTOR- ADG BLADE | 3 | |
| G600-100030-143 | ADG, BLADE PROTECTOR | 3 | |
| G600-11130-143 | BLADE PROTECTOR | 1 | |
| G600−100030−143 | PROTECTOR − ADG BLADE | 3 | |
| G601R101204-1 | PROTECTOR ADG BLADE | 6 | |
| G601R101204−1 | Protector Assy − ADG Blade | 6 | |
| G73-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| G73-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| GA200-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| GA200-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| GA7-120 | PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| GA7-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| GA8-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| GA8-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| GA8-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| GA8-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| GB1-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| GB7-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| GB7-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| GB8-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| GB8-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| GB960-100-220 | TOOL KIT, M/R BLADE RETEN, BOLT REM/INST | 1 | |
| GE-CFMI-723 | CFM56-7 Fan blade us inspection kit | 2 | |
| GE-FQAP-369 | CF6-80C/80E STAGE 3 BLADE PIECE PART EDDY CURRENT | 1 | |
| GE-FQAP-446 | FAN BLADE PIN HOLE INSPECTION KIT | 1 | |
| GE-FQAP-446A | FAN BLADE PIN HOLE INSPECTION KIT | 1 | |
| GE-FQAP-544 | FAN BLADE ULTRASONIC INSPECTION (GE90-115B) | 1 | |
| GE-FQAP-544A | KIT - ULTRASONIC INSPECTION, FAN BLADES | 1 | |
| GE-FQAP-599 | CF6-80C STG 1 HPT BLADE INSP KIT | 1 | |
| GE-FQAP-638 | FAN BLADE INSPECTION KIT GE AVIATION | 1 | |
| GE-FQAP-749 | KIT - FAN BLADE INSPECTION, GE ENGINES GE9X | 1 | |
| GER31003591 | CROSSRIVER FIXED BLADE KNIFE | 1 | |
| GFG350 | COPPER BLADES | 1 | |
| GFG350-1 | COPPER BLADES | 1 | |
| GIL-120 | PROPELLOR/SPINNER COVER, 3 blade, model 200 | 1 | |
| GIL-125 | INSULATED PROPELLOR/SPINNER COVER, 3 blade, model 200 | 1 | |
| GIL-130 | PROPELLOR/SPINNER COVER, 2 blade, model 200 | 1 | |
| GIL-135 | INSULATED PROPELLOR/SPINNER COVER, 2 blade, model 200 | 1 | |
| GIL-140 | PROPELLOR/SPINNER COVER, 3 blade, model 202 | 1 | |
| GIL-145 | INSULATED PROPELLOR/SPINNER COVER, 3 blade, model 202 | 1 | |
| GL1-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| GL1-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| GL1-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| GL1-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| GL2-140 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| GL2-145 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| GL2-150 | PROPELLOR/SPINNER COVER, 3 BLADE | 1 | |
| GL2-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| GLS-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| GLS-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| GLS-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| GLS-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| GRL-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| GRL-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| GS 19809-10 | BLADE MASTER HPC 12 STAGE | 1 | |
| GS 23417-1 | BLADE LIFTER | 13 | |
| GS 23420-1 | BLADE SEAL COMPRESSOR | 17 | |
| GS 23447-1 | BLADE BUTT CAP | 9 | |
| GS10262 | TEMPLATE BLADE ANGLE CHECKING | 1 | |
| GS11087 | PROTRACTOR BLADE SHANK | 1 | |
| GS11397 | FIXTURE BLADE HOLDING | 1 | |
| GS11901-1 | GAGE, BLADE ALIGNMENT INDICATOR | 1 | |
| GS12697 | SPACER BLADE HOLDING F | 1 | |
| GS12699 | ARBOR BLADE HOLDING FI | 1 | |
| GS12699-1 | ARBOR BLADE HOLDING | 1 | |
| GS13651 | MOLD BLADE FAIRING | 1 | |
| GS14842-1 | CAPT-BLADE BUTT | 1 | |
| GS148421 | CAPT-BLADE BUTT | 1 | |
| GS14844-1 | BAR, BLADE TURNING | 1 | |
| GS14850-2 | BLADE JACKING WRENCH | 1 | |
| GS15232-1 | TEMPLATE, BLADE | 1 | |
| GS15364 | PROPELLER BLADE TRUCK | 1 | |
| GS15364-1 | TRUCK, BLADE TRANSPORTATION | 1 | |
| GS15569-1 | TEMPLATE, BLADE ANGLE | 1 | |
| GS15573-1 | LIFTER, BLADE | 1 | |
| GS15574 | BLADE SEAL | 1 | |
| GS15574-1 | TOOL- BLADE SEAL | 18 | |
| GS155741 | R/I TOOL-BLADE SEAL | 18 | |
| GS15574‐1 | R/I TOOL‐BLADE SEAL | 18 | |
| GS15580-1 | REMOVE AND INSTALL THE BLADE BORE PLUG | 4 | |
| GS15848-1 | AIRCRAFT PROPELLER BLADE SUPPORT | 8 | |
| GS18033-1 | PROPELLER BLADE ROLLER | 10 | |
| GS18217 | PROTRACTOR BLADE ANGLE | 3 | |
| GS19826 | BLADE,TEMPLATE | 1 | |
| GS19826-1 | TEMPLATE, BLADE | 3 | |
| GS2-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| GS2-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| GS20391-1 | BLADE PIN TOOL | 2 | |
| GS20399-1 | BLADE BUTT CAP | 3 | |
| GS20406-1 | BLADE PIN | 2 | |
| GS20439-1 | FIXTURE BLADE, BALANCING | 2 | |
| GS20439-1 (14RF-21) | FIXTURE BALANCING (SINGLE BLADE) | 1 | |
| GS20439-2 | FIXTURE BLADE, BALANCING | 1 | |
| GS20834-1 | DUTRING BLADE ANGLE MEASUREMENT | 4 | |
| GS20844-1 | BLADE PIN FIXTURE | 2 | |
| GS20850-1 | AIRCRAFT PROPELLER BLADE SUPPORT | 3 | |
| GS20864-1 | TEMPLATE SET 42" STA, PROP BLADE | 3 | |
| GS20871-1 | Blade Lifter | 12 | |
| GS208711 | LIFTER-BLADE | 12 | |
| GS20873-1 | SUPPORT PROP BLADE | 4 | |
| GS20875-1 | LIFTER-BLADE | 4 | |
| GS20879-1 | BLADE LIFTER | 2 | |
| GS20885-1 | Blade Sling | 2 | |
| GS20885-2 | BLADE LIFTER | 1 | |
| GS20889-1 | BLADE LIFTER | 1 | |
| GS20968-1 | FIXTURE, BLADE BALANCING | 3 | |
| GS20970-1 | Prop Blade Butt | 7 | |
| GS209701 | CAP BLADE BUTT | 7 | |
| GS21025-1 | FOR BLADE TAP TEST | 4 | |
| GS21192-1 | BLADE LIFTER | 1 | |
| GS21211-3 | BLADE HEATER REPAIR KIT | 1 | |
| GS21251-1 | PULLER, BLADE PIN | 2 | |
| GS21294-1 | PROPELLER BLADE AND HUB REMOVAL | 12 | |
| GS21777-1 | TEMPLATE, SET 42" STATION, PROPELLER BLADE | 1 | |
| GS2229871 | BLADE SEAL GUIDE | 1 | |
| GS22987-1 | BLADE SEAL COMPRESSOR | 5 | |
| GS229871 | BLADE SEAL COMPRESSOR | 5 | |
| GS22989-1 | Blade Lifter | 6 | |
| GS229891 | LIFTER-BLADE | 6 | |
| GS22990-1 | BLADE, LIFTER | 1 | |
| GS22995-1 | SINGLE BLADE BALANCER | 1 | |
| GS22998-1 | PROPELLER BLADE END COVER | 1 | |
| GS229981 | CAP BLADE BUTT | 1 | |
| GS22999-1 | CAP, BLADE BUTT, 247F | 6 | |
| GS229991 | BLADE CAP | 6 | |
| GS23137-1 | BLADE SEAL COMPRESSO | 8 | |
| GS231371 | BLADE SEAL COMPRESSOR | 8 | |
| GS23406-1 | BLADE LEAD DRILL | 1 | |
| GS23413-1 | R/I TOOL-BLADE SEAL | 17 | |
| GS23417-1 | Blade Lifter | 13 | |
| GS234171 | LIFTER-BLADE | 13 | |
| GS23418-1 | PROPELLER BLADE (TEMPLATE) | 1 | |
| GS23420-1 | BLADE SEAL INSTALLATION TOOL | 17 | |
| GS234201 | BLADE SEAL COMPRESSOR | 17 | |
| GS23441-1 | BLADE BALANCING FIXTURE | 3 | |
| GS23441-2 | SINGLE BLADE BALANCER | 1 | |
| GS23441-3 | PROPELLER BLADE BALANCER | 1 | |
| GS23442-1 | BLADE SHEATH TEMPLATE | 1 | |
| GS23447-1 | CAP, BLADE BUTT | 9 | |
| GS23447-1-REVA | CAP BLADE BUTT | 1 | |
| GS234471 | CAP BLADE BUTT | 9 | |
| GS23665 | INSTAL LEAD WOOL IN THE BLADE TAPER BORE | 1 | |
| GS23980-1 | TEMPLATE, BLADE | 1 | |
| GS24151-1 | INSPECTION ZONE TEMPLATE BLADE FACE SIDE | 1 | |
| GS24151-2 | INSPECTION ZONE TEMPLATE BLADE CAMBER SIDE | 1 | |
| GS24287-1 | BLADE TEMPLATE | 1 | |
| GS24288-1 | BLADE TEMPLATE | 1 | |
| GS24289-1 | BLADE TEMPLATE | 1 | |
| GS24322-1 | SIZING TOOL, BLADE SEAL | 1 | |
| GS24323-1 | TORQUE ADAPTER, BLADE RING | 1 | |
| GS24519-1 | BLADE BALANCE MASTER | 1 | |
| GS24601-1 | MASTER BLADE | 1 | |
| GS29977-5 | MASTER BALANCING BLADE | 1 | |
| GSB6110026 | LIFTER-BLADE | 1 | |
| GSB6110031 | BLADE BUTT CAP | 1 | |
| GSE 068 | COVER- RAT BLADE | 1 | |
| GSE 10X-12-18 | COVERS - RAT BLADES AND HUB | 1 | |
| GSE068 | COVER, RAT BLADE | 1 | |
| GSE068-170-190 | COVER RAT BLADE | 1 | |
| GT-HS12B | HACKSAW 12" INCL BLADE | 1 | |
| GT-HSJR01 | BLADE HACKSAW JUNIOR | 1 | |
| GT-SDF01 | SCREWDRIVERS FLAT BLADE | 1 | |
| GU28767 | TOOL, BLADE RETENTION | 1 | |
| GU32608 | BLADE HOLDING JIG | 1 | |
| GYF-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| GYF-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| Gedore-029300 | Gedore 029300 BLADE 3*39mm | 1 | |
| Gedore-029305 | Gedore 029305 BLADE 3 POWER BIT-50mm | 1 | |
| Gedore-029320 | Gedore 029320 BLADE 4.5*39MM | 1 | |
| Gedore-029325 | Gedore 029325 BLADE 4 POWER BIT-50mm | 1 | |
| Gedore-029340 | Gedore 029340 BLADE 5.5*39mm | 1 | |
| Gedore-029345 | Gedore 029345 BLADE 5.5 POWER BIT-50mm | 1 | |
| Gedore-029360 | Gedore 029360 BLADE 6.5*39mm | 1 | |
| Gedore-029361 | Gedore 029361 BLADE 6.5 POWER BIT-50mm | 1 | |
| Gedore-029380 | Gedore 029380 BLADE 9*39mm | 1 | |
| H-64B | REPLACEMENT STANDARD BLADES 100 PCKG | 1 | |
| HA-212BAP | B205/212 M/R Blade Alignment Pin Set | 1 | |
| HA-350-BBHT | Blade Bolt Holding Tool AS350 | 1 | |
| HA-350BBHW | BLADE BOLT HOLDING WORKAID | 1 | |
| HA-3G6205G00331 | MR BLADE RETENTION BOLT TOOL | 1 | |
| HA-703A94-1130-01 | BLADE TRIM TAB | 1 | |
| HACKSAWBLADES1 | BLADES-HACKSAW, 12 X1/2 X 18 | 1 | |
| HACKSAWBLADES2 | BLADES-HACKSAW, 12 X1/2X 24 | 1 | |
| HACKSAWBLADES3 | BLADES-HACKSAW, 12 X1/2X 32 | 1 | |
| HACKSAWBLADES4 | BLADES-HACKSAW, JUNIOR | 1 | |
| HAR-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| HAR-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| HBD-400 | BLADE COVERS (set of 3) | 1 | |
| HBD-410 | BLADE COVERS, cold weather type (set of 3) | 1 | |
| HBD-500 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| HBL5266C | HUBBELL WIRING DEVICE-KELLEMS HBL5266C Straight Blade Male Plug, 15A, IP20 Rated, 3 Contacts | 1 | |
| HCS1201 | STRAIGHT BLADE PLUGS | 1 | |
| HCS1202 | Straight Blade Plug | 4 | |
| HCS2034-01 | PNEUMATIC BLADE CLAMP | 1 | |
| HCS2034-1 | BLADE LAMPS | 1 | |
| HCS2036-01-120A | STEP-PLY CUTTING BLADES | 1 | |
| HCS2036-01-1218 | STEP-PLY CUTTING BLADES | 1 | |
| HCS2036-120-18 | CUTTING BLADES | 1 | |
| HCS2036-120-19 | CUTTING BLADES | 1 | |
| HCY-400 | BLADE COVERS (set of 2) | 1 | |
| HEL-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| HEL-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| HHR-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| HHR-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| HK4-400 | BLADE COVERS (set of 2) | 1 | |
| HLT3TT-045-36 | BLADE MASTER HPC 13TH STAGE | 1 | |
| HMF-BG-135-500 | MAIN ROTOR BLADE SUPPORT STAND | 1 | |
| HOR-200 | BLADE COVERS (set of 2) | 1 | |
| HP1827 | BLADE CHECKER | 1 | |
| HS 8550 | GAGE, INDICATOR, BLADE ALIGNMENT | 2 | |
| HS-151 | HACKSAW, FOR 6" BLADES | 2 | |
| HS-7072 | FIXTURE - BLADE ANODIZING | 1 | |
| HS-7548 | TEMPLATE - BLADE ANGLE CHECKING | 2 | |
| HS-7572 | FIXTURE - BLADE HOLDING | 1 | |
| HS-7575 | FIXTURE - BLADE BALANCING | 1 | |
| HS-8149 | PULLER - MECHANICAL. BLADE BUSHING | 2 | |
| HS-8170 | ARBOR - HOLDING FIXTURE, BLADE | 1 | |
| HS-8550 | GAGE - BLADE ALIGNMENT INDICATOR | 2 | |
| HS-8696 | FIXTURE - LATHE. BLADE TIP | 1 | |
| HS-8702 | TRUCK - HAND BLADE | 1 | |
| HS-8703 | TRUCK - BLADE | 1 | |
| HS-8706-2 | COVER - PROTECTLVE, BLADE | 1 | |
| HS-8963 | CAP-BLADE BUTT | 1 | |
| HS-9374 | ARBOR- LATHE, BLADE SHANK | 1 | |
| HS5A | Mini Hacksaw , for 10" blades | 2 | |
| HS6762 | BAR - BLADE TURNING | 3 | |
| HS7069 | FIXTURE BLADE ANODIZE | 1 | |
| HS7072 | FIXTURE-BLADE ANODIZE | 1 | |
| HS7358 | MOLD BLADE FAIR | 1 | |
| HS7548 | TEMPLATE, BLADE ANGLE CHECKING | 2 | |
| HS7572 | BLADE HOLDING FIXTURE | 1 | |
| HS7573 | BLADE HOLDING FIXTURE ARBOR | 1 | |
| HS7575 | Fixture - Blade Balancing | 1 | |
| HS7594 | FIXTURE-BLADE GEAR POSITIONING | 1 | |
| HS7630 | SUPPORT-BLADE ADJUSTABLE | 2 | |
| HS7635 | RING - BLADE GEAR HOLDING | 1 | |
| HS7711 | BLADE FAIRING MOLD | 1 | |
| HS8149 | PULLER-MECHANICAL BLADE BUSHING | 2 | |
| HS8158 | TEMPLATE, BLADE ANGLE CHECKING | 2 | |
| HS8250 | GAGE BLADE ALIG | 1 | |
| HS8550 | GAGE - BLADE ALIGNMENT INDICATOR | 2 | |
| HS8679 | FIXTURE BLADE B | 1 | |
| HS8684 | ADAPTER BLADE HOLDING | 1 | |
| HS8687 | CLAMP, BLADE LIFTING | 2 | |
| HS8696 | FIXTURE LATHE, BLADE TIP | 1 | |
| HS8702 | HAND TRUCK BLADE | 1 | |
| HS8703 | TRUCK BLADE | 1 | |
| HS8750 | GAGE BLADE ALIGNMENT | 1 | |
| HS8963 | BLADE BUTT CAP | 1 | |
| HS9019 | ARBOR BLADE HOLD FIXTU | 1 | |
| HS9022 | CAP BLADE BUTT | 1 | |
| HS9278 | SPACER,BLADE HOLDER | 1 | |
| HS9374 | ARBOR-LATHE, BLADE SHANK | 1 | |
| HS9379 | SPACER - BLADE HOLDING | 1 | |
| HS9380 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9381 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HS9442 | CAP BLADE BUTT | 1 | |
| HS9538 | TEMPLATE - BLADE GROOVING GUIDE | 1 | |
| HS9757 | ARBOR - BLADE HOLDING FIXTURE | 1 | |
| HSBM1024B | PACK OF 10 SPARE HACKSAW BLADES (18TPI) | 1 | |
| HSBM1214B | HACK SAW BLADES (10 PACK) | 1 | |
| HSBM1224B | H.S.BLADES,24TPI,PKG OF 10 | 1 | |
| HSBM1232B | HACKSAW BLADE | 2 | |
| HSC2036-120-24 | CUTTING BLADES | 1 | |
| HSF-120 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| HSF-125 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| HSF-130 | PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| HSF-135 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| HSP 1827 | BLADE CHECKING INDICATOR | 3 | |
| HSP-116 | BENEH-BLADE GRINDING | 1 | |
| HSP-1827 | INDICATOR-BLADE CHECKING | 3 | |
| HSP-3293 | PEENER - ALUMIMUN BLADE | 1 | |
| HSP-381 | INSERTER - BLADE BUSHING | 2 | |
| HSP-916 | PULLER - BLADE PLUG | 2 | |
| HSP1297 | PEEN LOCAL REWORK AREAS ON THE BLADE | 2 | |
| HSP1382 | WRENCH BLADE PACKING N | 1 | |
| HSP1395 | HUB BLADE MASTER | 1 | |
| HSP1399 | BLADE RADIUS | 1 | |
| HSP1400 | BLADE MASTER BALANCING HUB | 1 | |
| HSP1402 | TOOL BLADE RADUS | 1 | |
| HSP1558 | TEMPLATE BLADE | 1 | |
| HSP1604 | BAR - BLADE TURNING | 1 | |
| HSP1827 | INDICATOR-BLADE CHECKING | 3 | |
| HSP2410 | TEMPLATE BLADE | 1 | |
| HSP2430 | TEMPLATE BLADE | 1 | |
| HSP2626 | BAR-BLADE TURNING | 1 | |
| HSP299 | BLADE HEAD STOCK FIXTURE | 1 | |
| HSP3293 | ALUMINIUM BLADE PEENER | 1 | |
| HSP381 | INSERTER - BLADE BUSHING | 2 | |
| HSP381DET5 | INSERTER BLADE BUSHING | 1 | |
| HSP4346 | WRENCH BLADE | 1 | |
| HSP4393 | WRENCH BLADE | 1 | |
| HSP46 | WITH HSP841 AND GS23441-1 AND -2 BLADE BALANCE | 2 | |
| HSP535 | BLADE BUSHING PULLER | 1 | |
| HSP5564 | BLADE TEMPLATE | 1 | |
| HSP7111 | TEMPLATE,BLADE ANGL | 1 | |
| HSP841 | WITH HSP46 AND GS23441-1 AND -2 BLADE BALANCE | 3 | |
| HSP916 | PULLER - BLADE PLUG | 2 | |
| HT3202M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) | 1 | |
| HT3203M | DRIVER W/BLADE (HI-TORQUE) | 5 | |
| HT3205M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3206M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3406M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3407M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3408M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3409M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT3410M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT4403M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HT4404M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB10M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB2M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 2 | |
| HTB3M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 3 | |
| HTB4M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB5M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB6M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB7M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB8M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTB9M | 2 PC Replaceable Blade Hi-Torque Drivers (Type: 1/4" Square Drive Socket) (Shank diameter: 1/2") (Bolt nominal diameter: #8) (Blade diameter: 0.500") (Overall length: 1.25" (32 mm)) (Add to cart: Add To Cart) (Type: 1/4" Square Drive Socket) (Shank diamet | 1 | |
| HTN-B-1 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) | 2 | |
| HTN-B-2 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 2 | |
| HTN-B-3 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 3 | |
| HTN-B-4 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 2 | |
| HTS-0 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 1 | |
| HTS-1 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 10 | |
| HTS-10 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 1 | |
| HTS-2 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 12 | |
| HTS-3 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 10 | |
| HTS-3A | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 2 | |
| HTS-4 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 12 | |
| HTS-4A | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 3 | |
| HTS-5 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 4 | |
| HTS-6 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 4 | |
| HTS-7 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 1 | |
| HTS-8 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 1 | |
| HTS-9 | Apex® Hi-Torque Bits (Blade thickness: .049") (Blade width: .274") (Body diameter: 9/32") (Overall length: 1-1/4") (Screw size: 1) (Type: 1/4" Hex Insert) (Add to cart: Add To Cart) (Blade thickness: .059") (Blade width: .295") (Body diameter: 5/16") (Ove | 1 | |
| HTZ-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| HTZ-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| HU16-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| HU16-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| HU21567 | RING-FAN BLADE RETAINER | 1 | |
| HU24429/2 | COVER - PROTECTIVE, LP COMPRESSOR DISC AND BLADES | 1 | |
| HU25335/2 | PILOT - LPC DISC AND BLADE SHAFT | 1 | |
| HU26664 | BLADE ASSY FIXTURE (RING 6082 ALLY) | 1 | |
| HU27493 | B757 FAN BLADE REMOVAL TOOL | 3 | |
| HU28788 | REACTOR PLATE LP COMP DISC & BLADES | 1 | |
| HU28790 | EXTRACTOR BUNG LP COMP DISC & BLADES | 1 | |
| HU29175 | DUMMY BOLTS (3 LOCATIONS) FOR LPC DISC AND BLADES | 1 | |
| HU29179 | Wrench - Adjusting, LPC Disc and Blades | 1 | |
| HU29255 | EXTRACTOR - IMPACT, FAN BLADE COMPONENTS | 14 | |
| HU29255-D | Extractor - Impact, Fan Blade Comp, B787 | 1 | |
| HU30334 | LP FAN BLADE RETENTION | 2 | |
| HU33428-1 | EXTRACTOR FAN BLADE | 3 | |
| HU33476-1 | EXTRACTOR, SINGLE BLADE FROM DISC RB211 | 1 | |
| HU3545 | EXTRACTOR-AIR INTAKE SPINNER AND LPC BLADES | 1 | |
| HU35451 | EXTRACTOR-AIR INTAKE SPINNER AND LPC BLADES | 9 | |
| HU37438 | PLATFORM ACCESS - FAN DISK AND BLADES ASSY | 1 | |
| HU37594 | FAN BLADE CHOCK PAD REMOVER TOOL | 14 | |
| HU37701 | COVER - FAN DISK AND BLADE ASSY | 2 | |
| HU37782 | PILOT-GUIDE R I FAN DISK AND BLADES | 4 | |
| HU38441 | PILOT - GUIDE, FAN BLADES WITH FAIL SAFE SHAFT IN POSITION | 1 | |
| HU38731 | LP DISC BLADE ASSY PLATFORM | 1 | |
| HU38731/1 | PLATFORM - ACCESS, LP DISC AND BLADE ASSEMBLY | 1 | |
| HU39483 | TOOL-FITTING FAN BLADE ASSY | 8 | |
| HU40308 | IMMOBILISER FAN BLADES WHILST TURNING IP SYSTEM | 4 | |
| HU40908 | BLADE ASSEMBLY FIXTURE | 1 | |
| HU41100 | ADAPTER-PILOT GUIDE R I FAN DISK AND BLADES | 1 | |
| HU41384 | ADAPTER-PILOT GUIDE R I FAN DISK AND BLADES | 1 | |
| HU42018-1 | GAUGE, TAPER - CHECK FANBLADE TIP | 1 | |
| HU42018-2 | GAUGE - TAPER CHECK GAP BETWEEN FAN BLADE TIP & OUTER FAN TRACK | 5 | |
| HU44525 | IMMOBILISER - LP FANBLADES | 1 | |
| HU44525-1 | 787 IMMOBILISER LP FANBLADES TOOL | 10 | |
| HU44525-2 | IMMOBILIZER - LP FANBLADES | 3 | |
| HU50397-1 | ADAPTER - REM.INST LP COMPRESSOR DISK, BLADES | 1 | |
| HU505091-1 | STAND - TRANSIT, FAN DISC AND BLADE ASSEMBLY | 1 | |
| HU51007-4 | BLADES | 1 | |
| HU55091-3 | STAND - FAN DISK AND BLADE ASSY | 1 | |
| HU55091-4 | STAND - TRANSIT, FAN DISC AND BLADE ASSY | 1 | |
| HU55091-5 | STAND - FAN DISK AND BLADE ASSY | 2 | |
| HU55143-6 | TIP CLEARANCE METER - FAN FRAME/FANBLADE | 1 | |
| HU80006 | DUMMY BLADE 1 | 1 | |
| HU80007 | DUMMY BLADE 1 | 1 | |
| HU80008 | DUMMY BLADE 1 | 1 | |
| HU80012 | GLASS PEEN TEST BLADE 1 | 1 | |
| HU80617-2 | ADAPTER-R/I LP COMPRESSOR DISK/BLADES | 1 | |
| HU80955 | FAN BLADE IMMOBILSER TOOL | 8 | |
| HU81332 | EXTRACTOR FAN BLADE | 2 | |
| HU81332-1 | EXTRACTOR - FAN BLADE FROM | 2 | |
| HU81570 | TAY FAN BLADE ROOT. ULTRA | 1 | |
| HU81850 | RB211 FAN BLADE INSPECTION KIT TOOL | 1 | |
| HU81925 | FAN BLADE ROOT CRACK ULTRASONIC KIT | 2 | |
| HU82106 | BLADE EDDY CURRENT INSPECTION KIT | 1 | |
| HU82386 | CALIBRATION BLADE (FOR M403T) | 1 | |
| HUM-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| HUM-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| HUMA SKU X411 | KNIFE BLADES | 1 | |
| HUR-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| HUR-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| HUS-101 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| HUS-102 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| HUS-103 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| HUS-104 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| HXC-17142 | Genx-2B engine fan blade storage rack | 1 | |
| IAC-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| IAE 1P16016 | IAE 1P16016 BLADE ADAPTER | 1 | |
| IAE 1P17030 | IAE 1P17030 BLADE RETAINER | 1 | |
| IAE1J12004 | Puller - Fan Blade Rotor | 13 | |
| IAE1J12092 | Removal of Fan BladesLHT Dwg No.(537220249) | 1 | |
| IAE1J12141 | BOLT- PUSHER FAN BLADE RETAINING RING | 16 | |
| IAE1J12188 | BOLT- PULLER FAN BLADE RETAINING RING | 24 | |
| IAE1J12312 | PROGRAM, DISTRIBUTION - FAN BLADE | 2 | |
| IAE1J2004 | EQUIPMENT - FAN BLADE PUSH/PULL | 1 | |
| IAE1M14015 | BLADE HOLDER | 1 | |
| IAE1M14018 | BLADE HOLDER | 1 | |
| IAE1P17030 | RETAINER, BLADE | 1 | |
| IAE1R18731 | BLADE, CALIBRATION | 1 | |
| IAE2P16207 | STAGES 1 & 2 HPT BLADE LENGTH OPTICAL GAGE | 1 | |
| IAE2P16371 | STAGES 1 HPT BLADE LENGTH GAGE | 1 | |
| IAE2R18901 | TEST SET, FOR V2500 FAN BLADES | 7 | |
| IAE2R19316 | ULTRASONIC PROBE TO INSPECT THE ROOTS OF V2500 FAN BLADES | 3 | |
| IAE2R19427 | FAN BLADE LEADING EDGE INSP KIT | 5 | |
| IAE2R19429 | FAN BLADE ROOT NDT KIT TOOL | 6 | |
| IAE2R19741 | METHOD2 - CALIBRATION BLADEQC6808 | 1 | |
| IAE2R19802 | V2500HPC ROTOR4 BLADE ROOT INSP TOOL | 1 | |
| IAE2R19921 | TEST SET KIT, T.A.P. - LP FAN BLADE, INSPECTION. | 3 | |
| IAE3J12712 | INSTALLATION TOOL (HANDLE NUT FLARE AT THE ROOT OF THE ENGINE BLADE) | 2 | |
| IAE3J12713 | BLADE RETAINING RING-PEEN TOOL | 2 | |
| IAE3R19016 | GAUGE, BLADE INSP | 2 | |
| IAE3R19320 | TEMPLATE, FAN BLADE | 2 | |
| IAE3R19764 | STD BLADE TOOLING | 1 | |
| IAG-270-01 | BLADE LOOK BENDER | 1 | |
| IAG-271-01 | HPC 1 st STG BLADE LOCK CRIMPER BLOCK FWD | 1 | |
| IAG-271-02 | HPC 1st STG BLADE LOCK CRIMPER LOCK FWD | 1 | |
| IAR-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| IAR-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| IAW1J12004 | FAN BLADE PULLER | 1 | |
| ICN-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| IDEAL 45-2828-1 | BLADE PACK FOR 45-2828-1 CUSTOM STRIPMASTER (26 TO 16 AWG) | 1 | |
| IDLK-6492 | BLADE, RINGER | 1 | |
| IDLK-6493 | BLADE, RINGER | 1 | |
| IDLK-6494 | BLADE, RINGER | 1 | |
| IDLK-6496 | BLADE, RINGER | 1 | |
| IDLK-6498 | BLADE, RINGER | 1 | |
| IDLK-6500 | BLADE, RINGER | 1 | |
| IDLL-7486 | BLADES, RINGER TOOL (2/PKG) | 1 | |
| IDLLA-4013 | BLADES, BELDEN MEDIANTWIST | 1 | |
| IDLLB-1151 | BLADE, FLAT | 1 | |
| IDLLB-1152 | BLADE, FLAT | 1 | |
| IDLLB-1153 | BLADE, FLAT | 1 | |
| IDLLB-1154 | BLADE, FLAT | 1 | |
| IDLLB-1155 | BLADE, FLAT | 1 | |
| IDLLB-1156 | BLADE, FLAT | 1 | |
| IDLLB-1748 | BLADES FOR IDL45-144 | 1 | |
| IDLLB-740 | BLADES, STRIPMASTER | 1 | |
| IDLLB-742 | BLADE STRIPMASTER | 1 | |
| IDLLB-744 | BLADE, STRIPMASTER | 1 | |
| IND-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| IND-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| INT-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| INT-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| J-9720-300 | PIN PULLER BLADE EXTRACTOR | 1 | |
| J000A | SET FEELER GAUGE 9 BLADE | 1 | |
| J000TL | FEELER GAUGE SET, 25 BLADE | 1 | |
| J120-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| J120-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| J170-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| J170-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| J200-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| J200-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| J250-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| J250-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| J250-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| J250-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| J32072-12 | BLADE RETAINER PLATE | 1 | |
| J32072-13 | BLADE CONTAINER | 1 | |
| J32072-24 | BLADE RETAINER PLATE | 1 | |
| J32072-25 | BLADE CONTAINER | 1 | |
| J4-110 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| J4-115 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| J78027-1 | REPLACEMENT EQUIPMENT - THRUST REVERSER, V-BLADE, ROLLS ROYCE TRENT 800 | 1 | |
| J78027-2 | REPLACEMENT EQUIPMENT - THRUST REVERSER, V-BLADE, ROLLS ROYCE TRENT 800 | 1 | |
| JDL-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| JDL-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| JHW24418 | NUT DRR 5 BLADE 11/32 | 1 | |
| JHW385113055 | 1/2IN BANDSAW BLADE | 1 | |
| JHW40052 | AUTOLOAD UTIL KNIFE 5 BLADES | 1 | |
| JHW812641415 | BAND SAW BLADE 15FT 6IN | 1 | |
| JHW816069215 | BAND SAW BLADE 15FT 16IN | 1 | |
| JHW818064509 | BANDSAW BLADE | 1 | |
| JHW823236814 | 14 x 6 BANDSAW BLADE COBALT | 1 | |
| JHW828261507 | 93Lx3/4Wx10 TEETH BANDSAWBLADE | 1 | |
| JMP/BMW/A/4968 | 60" Fan Blade Wash Lance | 1 | |
| JSB1 | PERMA-GRIT BOSCH/MAKITA JIGSAW BLADE | 1 | |
| JSB24S | Replacement Blades for Jet Air Body Saw (5 Pack) (Description: Replacement Blades (5 pack)) (Add to cart: Add To Cart) | 1 | |
| JST-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| JST-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| JST-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| JST-155 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| JW8097572 | KIT SHIMS FOR BLADES MEASURMET | 1 | |
| JW81-97125 | KIT SHIMS FOR BLADES MEASURMET | 1 | |
| JW97116 | KIT SHIMS FOR BLADES MEASURMET | 1 | |
| JW97468 | KIT SHIMS FOR BLADES MEASURMET | 1 | |
| K52005-80 | BLADE ASSY | 1 | |
| K604063-201 | SLING ASSY BLADE | 1 | |
| KDK-120 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| KDK-125 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| KDK-130 | PROPELLOR/SPINNER COVER, MT 5 Blade | 1 | |
| KDK-135 | INSULATED PROPELLOR/SPINNER COVER, MT 5 Blade | 1 | |
| KEN5725530 | 9.5X250MM SQ BLADE PRO-TORQ SCREW D | 1 | |
| KER1550ST | Knife, Lock Back, Black Out, Serrated Blade | 1 | |
| KER1660CBSO | LEEK COMPOSITE BLADE W/SO | 1 | |
| KER1812OLCB | DIVIDEND-OLIVE COMPOSITE BLADE | 1 | |
| KER1890RBX | LONEROCK RBK REPL BLADES | 1 | |
| KFX-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| KFX-151 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| KFX-155 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| KFX-156 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| KIS-130 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| KIS-135 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| KIT INSTALLATION BLADE | PROPELLER BLADE INSTALLATION KIT (ENG 3) | 1 | |
| KITV2500-00003 | KIT - FAN BLADE MAINTENANCE | 1 | |
| KK134705 | Gripping Blade, Left | 1 | |
| KK134706 | Gripping Blade, Right | 1 | |
| KLE1550-6 | ELECTRICIAN'S KNIFE, 3 BLADE | 1 | |
| KLE44000 | POCKET KNIFE 2 1/4IN BLADE | 1 | |
| KLE44001 | POCKET KNIFE 2-1/2 IN BLADE | 1 | |
| KLE44002 | POCKET KNIFE 2-3/8 IN BLADE | 1 | |
| KLE44003 | POCKET KNIFE 2-3/4 IN BLADE | 1 | |
| KLE44004 | POCKET KNIFE 2-3/8 IN BLADE | 1 | |
| KLE44005 | POCKET KNIFE 2-5/8 IN BLADE | 1 | |
| KMX-200 | BLADE COVERS (set of 4) | 1 | |
| KMX-210 | BLADE COVERS (cold weather type) (set of 4) | 1 | |
| KOL-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| KOL-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| KP5-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| KP5-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| KP5-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| KP5-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| KR2-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| KR2-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| KS2113 | PROTACTOR, BLADE ANGLE PROPELLER | 7 | |
| L-13097 | BLADE MASTER HPC 13TH STAGE | 1 | |
| L-13108 | BLADE MASTER HPC | 1 | |
| L-147636 | BLADE MASTER HPC | 1 | |
| L-20045 | BLADE MASTER HPC | 1 | |
| L-20932 | BLADE MASTER HPC | 1 | |
| L-37799 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37810 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37815 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37822 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37823 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37840 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37845 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37855 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-37920 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-4419 | Blade Pack for 45-090 - 8-12 AWG | 2 | |
| L-4420 | Blade Pack for 45-091 - 10-18 AWG | 2 | |
| L-4421 | Ideal Blade Set | 7 | |
| L-45-1654 | WIRE STRIPPER BLADES | 1 | |
| L-4994 | Blade Pack for 45-097 - 16 - 26 AWG | 4 | |
| L-5210 | Blade Pack for 45-170 & 45-180 | 3 | |
| L-5211 | Blade Pack for 45-171 & 45-181 | 3 | |
| L-534718 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534862 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534866 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-534884 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-5361 | Stripmaster Wire Stripper Blade Set for 45-098 Wire Stripper | 3 | |
| L-5361M | WIRE STRIPPER BLADES | 1 | |
| L-5436 | Blade Pack for 45-172 & 45-182 | 2 | |
| L-543814 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544317 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544394 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544415 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544638 | CUTTER FAN BLADE LEADING EDGE | 1 | |
| L-544919 | LOCK BENDERS, PNEUMATIC LPT DISK AND BLADES ASSY 8TH AND PTH STAGE | 1 | |
| L-544943 | LOCK BENDERS, PNEUMATIC LPT DISK AND BLADES ASSY 8TH AND PTH STAGE | 1 | |
| L-545736 | JAWS CHECK & CORRECT BLADES | 1 | |
| L-545948 | GAGE LENGTH BLADE HPC 5TH STAGE | 1 | |
| L-546271 | GAGE LENGTH BLADE HPC 5TH STAGE | 1 | |
| L-546807 | GAGE BLADE LENGTH | 1 | |
| L-5559 | Blade Pack for 45-176 & 45-186 | 2 | |
| L-5560 | Blade Pack for 45-177 & 45-187 | 3 | |
| L-5561 | Blade Pack for 45-178 & 45-188 | 2 | |
| L-5562 | Ideal Blade Set | 3 | |
| L-5563 | WIRE STRIPPER BLADE | 4 | |
| L-5564 | Blade Pack for 45-175 & 45-185 | 2 | |
| L-5616 | 45-170 Stripper Frame - No Blades 10-14 AWG | 2 | |
| L-5617 | 45-171 Stripper Frame - No Blades 16-30 AWG | 2 | |
| L-7486 | Blade Pack for 45-128 | 2 | |
| L-9038 | 16-26 AWG Stripmaster™ Replacement Frame (Blades Sold Separately) | 2 | |
| L-9039 | 10-14 AWG Stripmaster™ Replacement Frame (Blades Sold Separately) | 2 | |
| L-9225 | Blade Pack for 45-162, 45-163 & 45-165 | 2 | |
| L-9226 | Blade Pack for 45-164 | 2 | |
| L109-400 | BLADE COVERS (set of 4) | 1 | |
| L109-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| L109-500 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| L11-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L11-115 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L119-300 | BLADE COVERS (set of 4) | 1 | |
| L119-301 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| L119-310 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| L133M6201101 | H135 MAIN BLADE REMOVAL DAMPING DAMPER TOOL | 2 | |
| L133M6203101 | MAIN ROTOR BLADESBUSHINGS MOUNTING TOOL | 1 | |
| L133M6204101 | PULLER MAIN ROTOR BLADE DAM | 1 | |
| L136M0001101 | CONTAINER M/R BLADE | 1 | |
| L139-200 | BLADE COVERS (set of 5) | 1 | |
| L139-210 | BLADE COVERS, cold weather type (set of 5) | 1 | |
| L139-300 | TAIL ROTOR BLADE COVERS (set of 4) | 1 | |
| L139-500 | BLADE TIE-DOWNS (fabric type) (set of 5) | 1 | |
| L16-115 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L169-300 | BLADE COVERS (set of 4) | 1 | |
| L169-301 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| L169-310 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| L17-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L17-122 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| L17-125 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| L17-127 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| L18-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| L18-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| L19-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L19-115 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L2-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| L2-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| L235-130 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L235-135 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| L235-140 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| L235-145 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| L2K-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L2K-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| L2K-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| L2K-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| L3-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L300-150 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| L300-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| L300-HPP | PITOT COVER, blade type | 1 | |
| L320-110 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| L320-112 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| L320-115 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L320-117 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| L4421 | BLADE SET WIRE STRIPPER | 7 | |
| L47572P01 | FIG 54 - 9, BLADE, LPTR STAGE 2 | 1 | |
| L47573P01 | FIG 54 - 31, BLADE, LPTR STAGE 3 | 1 | |
| L47574P01 | FIG 54 - 37, BLADE, STAGE 4 | 1 | |
| L4994 | BLADE PACK | 4 | |
| L50528P01 | FIG 54 - 1, BLADE, LPTR STAGE 1 MACHINING | 1 | |
| L50529P01 | FIG 54 - 51, BLADE, STAGE 6, LP TURBINE ROTOR | 1 | |
| L50543P01 | FIG 54 - 43, BLADE, STAGE 5, LP TURBINE ROTOR | 1 | |
| L5563 | BLADE FOR 45-174 | 4 | |
| L600-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| L600-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| L620M1810051 | OPT BLADE TRACKER | 1 | |
| L641G6001101 | TAIL BLADE PROTECTION TOOL | 1 | |
| L641G6002201 | TAIL BLADE PROTECTION TOOL | 1 | |
| L8A-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| L8A-115 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| L90-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| L90-131 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| LA250-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| LA250-121 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| LA250-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| LA4-150 | PROPELLOR COVER, 2 blade, no spinner | 1 | |
| LA4-155 | INSULATED PROPELLOR COVER, 2 blade, no spinner | 1 | |
| LA4-160 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| LA4-165 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| LA4-170 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| LAC-120 | PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| LAC-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| LAPR-300 | BLADE COVERS (set of 4) | 1 | |
| LAPR-301 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| LAPR-310 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| LB-1001 | Blade Pack for 45-671 | 2 | |
| LB-1002 | Blade Pack for 45-672 24-30 AWG | 2 | |
| LB-743 | Blade Pack for 45-265 | 2 | |
| LB-912 | BLADE SET 16-22 | 1 | |
| LB-913 | Blade Pack for Die Type 20-26 AWG | 2 | |
| LB-918 | BLADE 45-638/45-658 (MTO) AS5768/2-B1 | 1 | |
| LCB-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| LCB-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| LCB-130 | PROPELLOR COVER (no spinner), 2 Blade | 1 | |
| LCB-135 | INSULATED PROPELLOR/SPINNER COVER (no spinner), 2 Blade | 1 | |
| LEG-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| LEG-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| LEG-130 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| LEG-135 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| LES-140 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| LES-145 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| LES-150 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| LES-155 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| LEV-165 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| LEV-170 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| LEV-175 | PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| LEV-180 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| LEZ-400 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| LEZ-405 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| LEZ-410 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| LEZ-415 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| LFT2-3000 | SLING, T/R HEAD AND BLADES LIF | 1 | |
| LFT2/3000 | SLING, T/R HEAD AND BLADES LIFTING | 1 | |
| LIV-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| LIV-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| LIV-140 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| LIV-145 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| LIV-150 | PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| LIV-155 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| LIV-156 | ENGINE/UPPER BLADE/SPINNER COVER | 1 | |
| LNG-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| LNG-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| LPV-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| LPV-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| LST50044 | 18",4RGRADREGULARBLADE | 1 | |
| LST50045 | 24" 4R GRAD REGULAR BLADE | 1 | |
| LST50056 | 12"4RGRADW/CENTERHEAD®BLADE | 1 | |
| LST50059 | 18", 4R GRADE, REG BLADE | 1 | |
| LST50063 | 24", 4R GRAD, REG BLADE | 1 | |
| LST50134 | 6"SQ(150MM)BLADE,4-5/16"(110MM | 1 | |
| LST52503 | BLADE MICROMETER 2-3IN | 1 | |
| LST52505 | BLADE MICROMETER 3-4IN | 1 | |
| LST52507 | BLADE MICROMETER 4-5IN | 1 | |
| LST56366 | 12 4R GRAD SATIN CHRM BLADE | 1 | |
| LTCT11060 | Fixture, Holding Power Turbine Blade | 1 | |
| LTCT11350X | Gage, Fourth Stage Power Turbine Blade | 1 | |
| LTCT12747-01 | Fixture, Blade, Tip Grinding | 1 | |
| LTCT1643 | Drift Assembly, Compressor Blades | 2 | |
| LTCT1644 | Drift Assembly, Compressor Blades | 2 | |
| LTCT6623 | Kit, Blade Installation | 1 | |
| LTCT7331-01 | Sealing Plate and Blades Removal Assembly | 1 | |
| LTCT7468-01 | Fixture Assembly, Fan Blade Indicator | 1 | |
| LTCT7494-01 | ENGINE FAN BLADE LOCKING TOOL | 5 | |
| LTCT7660 | INSTALLATION KIT, COMP. BLADE | 1 | |
| LTCT7660-01 | Tool Assembly, Compressor Blades Installation | 1 | |
| LTCT7989 | Fixture, Blade, Checking | 1 | |
| LTCT7995 | Fixture, Blade, Checking | 1 | |
| M-1 | BLADE TORQUE BAR | 5 | |
| M-381 | BLADE BUSHING INSERTER | 1 | |
| M/R BLADE BELL 412/412EP | M/R BLADE BELL 412/412EP | 1 | |
| M10-115 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| M10-120 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| M110-121 | PROPELLOR/SPINNER COVER, 4 Blade (set of 2) | 1 | |
| M110-125 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade (set of 2) | 1 | |
| M120-130 | PROPELLOR/SPINNER COVER, 4 Blade (set of 2) | 1 | |
| M120-135 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade (set of 2) | 1 | |
| M1200 | Heavy Duty Tinner Snip with Replaceable Blades (Made in the USA!) | 1 | |
| M1200-R | Replacement Blade Set Only for Model M1200 Snips | 1 | |
| M12ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) | 1 | |
| M14A | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| M14ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| M20-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| M20-121 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| M20-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| M20-130 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| M200-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| M200-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| M2007 | HARDENED ALLOY STEEL BLADES | 4 | |
| M201-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| M201-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| M201-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| M201-135 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| M20V-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| M20V-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| M22-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| M22-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| M22520-7-12 | STROBEX BLADE TRACKER MODEL 135M-12 | 6 | |
| M28-148 | PROP SPINNER & BLADES COVER (5-blade) (set of 2) | 1 | |
| M28-149 | INSULATED PROP SPINNER & BLADES COVER (5-blade) (set of 2) | 1 | |
| M312-140 | PROP/SPINNER COVER, 4-blade | 1 | |
| M314-140 | PROP/SPINNER COVER, 4-blade | 1 | |
| M3914597 | GAGE LENGTH BLADE HPC 13TH STAGE | 1 | |
| M500-300 | BLADE COVERS (set of 2) | 1 | |
| M500-301 | BLADE/TIE-DOWN COVERS (set of 2) | 1 | |
| M500-302 | BLADE TRANSPORT BAGS (set of 2) | 1 | |
| M500-303 | AFT BLADE TIE-DOWN (sliding type) | 1 | |
| M500-304 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| M601-913.9 | MIRROR FOR COMPRESSOR BLADES INSPECTION | 1 | |
| M880-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| M880-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| M880-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| M880-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| M893-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| M893-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| MA5-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| MA5-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| MAU-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| MAU-112 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| MAU-115 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| MAU-117 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| MC106530943 | KNIFE, CRAFTSMAN, LARGE WITH BLADE | 1 | |
| MC12A | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| MC12ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| MC14A | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 2 | |
| MC14ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| MCI06530901 | KNIFE, CRAFTSMAN'S, SMALL WITH BLADE | 1 | |
| MCI06530927 | KNIFE, CRAFTSMAN'S, MEDIUM WITH BLADE | 1 | |
| MCI06530943 | KNIFE, CRAFTSMAN'S, LARGE WITH BLADE | 1 | |
| MCI84970094 | HOLDER, BLADE, RAZOR, (QTY 4) SMALL WITH BLADE | 1 | |
| MCNALLY INDUSTRIES/ P/N 900199 | NEW ROTOR BLADE SLING (RUPHIS) | 1 | |
| MCR-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| MCS1006800 | BLADE CLAMP | 1 | |
| MD900-101 | MAIN ROTOR HUB COVER (extended downward, Velcro at blade links) | 1 | |
| MD900-102 | MAIN ROTOR HUB COVER (Extended downward), seals at end for blades attached/not attached | 1 | |
| MD900-600 | BLADE COVERS (standard type) (set of 5) | 1 | |
| MD900-610 | BLADE COVERS (cold weather type) (set of 5) | 1 | |
| MD900-611 | BLADE COVERS (cold weather type w/tie-down detail) (set of 5) | 1 | |
| MD900-612 | BLADE COVERS (cold weather type w/tie-down detail & spoilers) (set of 5) | 1 | |
| MD900-615 | BLADE TIE-DOWNS (fabric type) (set of 5) | 1 | |
| MEAG-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| MEAG-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| MEAG-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| MEAG-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| MER-120 | PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| MER-125 | INSULATED PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| MER-130 | PROPELLOR/SPINNER COVERS, 5 Blade (set of 2) | 1 | |
| MER-135 | INSULATED PROPELLOR/SPINNER COVERS, 5 Blade (set of 2) | 1 | |
| MET48390510 | 14 TPI BI METAL BAND SAW BLADE | 1 | |
| MGP-300 | BLADE TIE-DOWNS (fabric type) (set of 3) | 1 | |
| MGT-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| MGT-151 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| MGT-155 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| MGT-156 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| MH68-210 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| MH68-300 | BLADE COVERS (set of 4) | 1 | |
| MH68-301 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| MH6J-205 | BLADE COVERS (set of 5) | 1 | |
| MH6J-210 | BLADE COVERS, cold weather type (set of 5) | 1 | |
| MH6J-250 | BLADE TIE-DOWNS (fabric type) (set of 5) | 1 | |
| MI17-200 | MAIN ROTOR BLADE TIE DOWNS (set of 5) | 1 | |
| MLT-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| MLT-121 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| MOD72-082 | BLADE STOP DRILLS | 1 | |
| MON-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| MON-151 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| MOS-400 | BLADE COVERS (set of 2) | 1 | |
| MOVA-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| MOVA-121 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| MOVA-125 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| MOVA-126 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| MP.090-60BL | BLADE PROBE (BOEING) | 1 | |
| MP045-60BL | PROBE STRAIGHT BLADE | 1 | |
| MP90.045-60BL/1-3M ( | BLADE PROBE (RH SIDE) | 1 | |
| MP90.045-60BL/1-3M-LH | BLADE PROBE LEFT HAND, 90° X .045" THICK, 1-3MHZ, 9" LONG (6" WORKING LENGTH), MICRODOT CONNECTOR | 1 | |
| MP90.045-60BL/1-3M-RH | BLADE PROBE, RIGHT HAND SIDE SENS | 1 | |
| MP90.06-BL U114 | BLADE PROBE | 1 | |
| MP90.060-60BL | FLEXIBLE BLADE PROBE SHIELDED, 50-500KHZ, 90°DEGREES, .500" DROP. .060" THICK, 6.0" LONG SUPPLIED WITH A MICRODOT CONNECTOR | 1 | |
| MPN0411 | Fan blade storage, V2500,CFM56-7 | 1 | |
| MQ8B-200 | BLADE TIE-DOWNS, adjustable strap attachments (set of 4) | 1 | |
| MQ8B-201 | BLADE TIE-DOWNS, alternate design w/ velcro strap detail (set of 4) | 1 | |
| MQ8B-210 | ROTOR HUB COVER, for folding blade system, extra-secure Velcro closure | 1 | |
| MQ8B-211 | ROTOR HUB COVER, for folding blade system, alternate design w/Velcro Closure | 1 | |
| MQ8C-165 | MAIN ROTOR MAST/DRIVE SHAFTS COVER (folding blades) | 1 | |
| MQ8C-170 | MAIN ROTOR MAST/DRIVE SHAFTS COVER (Blades Removed) | 1 | |
| MQ8C-300 | BLADE COVERS (set of 4) | 1 | |
| MQ8C-301 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| MQ8C-310 | BLADE COVERS (cold weather type) (set of 4) | 1 | |
| MQ8C-311 | BLADE COVERS (cold weather/hail protection type) (set of 4) | 1 | |
| MQ8C-312 | BLADE COVERS w/Tie-Down Add-On Detail (set of 4) | 1 | |
| MQ8C-313 | BLADE COVERS (cold weather type & Tie-Down Add-On) (set of 4) | 1 | |
| MQ8C-420 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| MSE-54 | EXTRACTOR, FAN BLADE | 8 | |
| MSE-79 | BORESCOPE BLENDING TOOL - HPC BLADE | 1 | |
| MSE54 | FAN BLADE EXTRACTION TOOL 767 CF6 | 8 | |
| MSE‐54 | EXTRACTOR, STG 1 FAN BLADES | 8 | |
| MSK-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| MSK-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| MSRPACK5 | 5 BLADE PACK | 1 | |
| MT050-1 | Rigging Fixture, MR Blade | 1 | |
| MT147-1 | MAIN ROTOR BLADE SPINDLE AIR BLEED TOOLS | 1 | |
| MT352-1 | MAIN ROTOR BLADE TRIM TAB GAGE | 2 | |
| MT525-1 | Fixture, R44 M.R. Blade | 2 | |
| MT525-1/PHP | FIXTURE, R44 M.R. BLADE | 1 | |
| MT525-2 | RIGGING TOOL - TR BLADE | 2 | |
| MT525-7 | FIXTURE, R66 MR BLADE | 1 | |
| MT525-7/PHP | FIXTURE, R66 MR BLADE | 1 | |
| MT525-9 | FIXTURE ASSY, R66 T.R. BLADE | 1 | |
| MT525-9/PHP | FIXTURE ASSY, R66 T.R. BLADE | 1 | |
| MT526-1 | MR Blade Trim Tab Bender Assy | 2 | |
| MT526-1/PHP | MR BLADE TRIM TAB BENDER ASSY | 1 | |
| MT526-8 | MR Blade Tab Bender Assy | 1 | |
| MT526-8/PHP | MAIN ROTOR BLADE TRIM TAB BENDER | 1 | |
| MTLS-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| MTLS-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| MTO-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| MTO-310 | BLADE COVERS, w/ tie downs (set of 2) | 1 | |
| MU2-120 | PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| MU2-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| MU2-130 | PROPELLOR/SPINNER COVER, 4 Blade (set of 2) | 1 | |
| MU2-131 | PROPELLOR/SPINNER COVER, 5 Blade (set of 2) | 1 | |
| MU2-135 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade (set of 2) | 1 | |
| MU2-136 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade (set of 2) | 1 | |
| MUR-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| MUR-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| MUR-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| MUR-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| MVIQ-BLADECOUNT | ARTIFICIAL INTELLIGENCE (AI) BLADE COUNTER ANALUTIC | 1 | |
| MW275-01 | Moore & Wright MW275-01 Blade External Micrometer, Range 0-25mm Resolution 0.01mm | 1 | |
| MW275-02 | Moore & Wright MW275-02 Blade External Micrometer, Range 25-50mm Resolution 0.01mm | 1 | |
| MW275-03 | Moore & Wright MW275-03 Blade External Micrometer, Range 50-75mm Resolution 0.01mm | 1 | |
| MW275-04 | Moore & Wright MW275-04 Blade External Micrometer, Range 75-100mm Resolution 0.01mm | 1 | |
| MW500-01 | Moore & Wright Bevel Protractor 360°, 150 & 300mm Blade | 1 | |
| MW510-01 | Moore & Wright Bevel Protractor 360°, 150 & 300mm Blade | 1 | |
| MXR-200 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| MXR-205 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| MYS-120 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| MYS-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| NB40FRB | FAN BLADE RACK | 1 | |
| NOR-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| NOR-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| NP60-0126-00 | BLADE BAT | 1 | |
| NP856A3518 | FAN BLADE STAND | 1 | |
| NRM-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| NRM-151 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| NRM-155 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| NRM-160 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| NXT-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| NXT-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| NYZ7000S | MASTIC BLADE | 1 | |
| NYZ700110 | 1IN BLADE - | 1 | |
| NYZ7001200 | 1IN BLADE - | 1 | |
| NYZ700510 | 1/2IN BLADE | 1 | |
| NYZ7007HD | BLADE HANDLE TOOL | 5 | |
| NYZ700AD | ABRASIVE NYROC BLADE SHARPENING DISCS | 1 | |
| NYZ701410 | 1/4IN BLADE | 1 | |
| NYZ70341 | MASTIC REMOVAL NYROC® BLADES | 1 | |
| OBS-120 | PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| OBS-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| OBS-130 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| OBS-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| ODROX-10 | ONYX KNIFE -BLACK 3 BLADES | 1 | |
| ODRRLB-30 | RAZOR-LITE - ORANGE 6 BLADES | 1 | |
| ODRRLU-40 | RAZOR-LITE -BLUE 6 BLADES | 1 | |
| ODRRLU30-40C | 3IN RAZR LITE EDC BLU/4-BLADES | 1 | |
| ODRRLY-50 | RAZOR-LITE - GRAY 6 BLADES | 1 | |
| ODRRMB-20C | RAZORMAX ORANGE 6-BLADES | 1 | |
| ODRRO-20 | RAZOR-PRO -ORANGE 6 BLADES | 1 | |
| ODRRR22-6C | 2.2 DROP-POINT BLADE PACK | 1 | |
| ODRRR25K-6C | 2.5 DROP-POINT BLADE PACK - B | 1 | |
| ODRRR35-24 | 24PCS-3.5IN DROPPOINT BLADE PK | 1 | |
| ODRRW30-60 | RAZOR WORK GRAY 3 BLADE BOX | 1 | |
| OEM 25025 26 | BLADE MASTER FEELER GAUGE | 1 | |
| OH58-300 | BLADE COVERS, standard type (set of 4) | 1 | |
| OH58-305 | BLADE COVERS, padded for hail protection (set of 4) | 1 | |
| OH58-310 | BLADE COVERS, cold weather type (set of 4) | 1 | |
| OH58-320 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| OMAT 4 / 71 | BLADE LUBRICATION PACKAGE HANDLE | 4 | |
| OMAT4-71 | Blade Lubrication Package Handle | 4 | |
| OMF-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| OMF-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| ONX-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| OPS-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| OPS-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| OTW-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| OTW-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| OUT83 | EXTRACTOR; BLADE | 7 | |
| OV1-200 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| OV1-205 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| OV10-120 | PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| OV10-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| OWF930038 | KIT SHIMS FOR BLADES MEASURMET | 1 | |
| OWF950001 | STAND FOR THP BLADES | 1 | |
| OWG970003 | PROTECT HPT BLADES AND HOTR ASSEMBLY | 1 | |
| P1-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| P1-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| P12-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| P12-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| P149-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| P149-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| P180-135 | PROPELLOR/SPINNER COVERS, 5 Blade (set of 2) | 1 | |
| P180-140 | INSULATED PROPELLOR/SPINNER COVERS, 5 Blade (set of 2) | 1 | |
| P2-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| P2-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| P2V-120 | PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| P2V-125 | INSULATED PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| P3-120 | PROPELLOR/SPINNER COVER, 3 Blade (Pilatus P/N 60F-W-45) | 1 | |
| P3-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (Pilatus P/N 60F-W-45) | 1 | |
| P31C-150 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| P31C-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| P31T-135 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| P31T-137 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| P31T-140 | PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| P31T-142 | INSULATED PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| P38-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| P38-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| P40-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| P40-125 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| P42A-120 | PROPELLOR/SPINNER COVER, 4 Blade (set of 2) | 1 | |
| P42A-125 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade (set of 2) | 1 | |
| P46P-115 | PROPELLOR/SPINNER COVER, 3 blade Hartzell | 1 | |
| P46P-116 | PROPELLOR/SPINNER COVER, MT 5 blade | 1 | |
| P46P-117 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| P46P-120 | INSULATED PROPELLOR/SPINNER COVER, MT 5 blade | 1 | |
| P46T-150 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| P46T-151 | PROPELLOR/SPINNER COVER, 5 blade | 1 | |
| P46T-155 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| P46T-156 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| P46T-170 | PROP TIE/EXHAUST COVER SET, 4-blade (set of 4) | 1 | |
| P46T-171 | PROP TIE/EXHAUST COVER SET, 4-blade, heat resistant type (set of 4) | 1 | |
| P46T-175 | PROP TIE/EXHAUST COVER SET, 5-blade (set of 4) | 1 | |
| P46T-176 | PROP TIE/EXHAUST COVER SET, 5-blade, heat resistant type (set of 4) | 1 | |
| P47-120 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| P47-125 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| P51-140 | PROPELLOR BLADE COVERS (set of 4) | 1 | |
| P601-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| P601-131 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| P601-132 | PROPELLOR/SPINNER COVER, 4-blade (set of 2) | 1 | |
| P601-133 | INSULATED PROPELLOR/SPINNER COVERS, 4 blade (set of 2) | 1 | |
| P63-140 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| P63-145 | INSULATED PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| P68B-120 | PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| P68B-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| P68B-130 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| P68B-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| P68C-120 | PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| P68C-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| P68C-130 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| P68C-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| PA11-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA11-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA12-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA12-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA14-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA14-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA18-120 | PROPELLOR/SPINNER COVER. 2 Blade | 1 | |
| PA18-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA20-110 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA20-112 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA24-130 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| PA24-132 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA24-135 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PA24-137 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PA25-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA25-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA25-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PA25-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PA28-185 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| PA28-186 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| PA28-187 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PA28-189 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PA30-160 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| PA30-165 | INSULATED PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| PA30-170 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| PA30-175 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| PA31-150 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| PA31-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| PA31P-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| PA31P-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| PA32-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| PA32-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| PA32-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PA32-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PA34-300 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| PA34-305 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade (set of 2) | 1 | |
| PA34-310 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| PA34-315 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| PA34-HPP | PITOT COVER, blade type | 1 | |
| PA36-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PA36-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PA38-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA38-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA42-120 | PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| PA42-125 | INSULATED PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| PA42-130 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| PA42-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| PA44-120 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| PA44-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| PA44-130 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| PA44-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| PA46-110 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PA46-111 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PA46-112 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| PA46-113 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PA46-114 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| PA46-115 | INSULATED PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| PAC-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| PAC-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PAN-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| PAN-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PART 6 57-30-09 | BLADE PROBE | 1 | |
| PAZ-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PAZ-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PBY-120 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| PBY-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| PC12-120 | PROP TIE-DOWN/EXHAUST COVER SET, 4 blade (set of 4) | 1 | |
| PC12-121 | PROP TIE-DOWNS, 4 blade (set of 2) | 1 | |
| PC12-122 | PROP TIE-DOWN/EXHAUST COVER SET, 5 blade (set of 4) | 1 | |
| PC12-123 | PROP TIE-DOWNS, 5 blade (set of 2) | 1 | |
| PC12-124 | PROP TIE-DOWN/EXHAUST COVER, fully enclosed SET, 4 blade (set of 4) | 1 | |
| PC12-125 | PROP TIE-DOWN/EXHAUST COVER, fully enclosed SET, 5 blade (set of 4) | 1 | |
| PC12-129 | PROP TIE-DOWN/EXHAUST COVER SET, 4 blade (OEM Equiv. with detachable coated hook and exh. stack covers on quick release clips) (set of 6) | 1 | |
| PC12-130 | PROP TIE-DOWN/EXHAUST COVER SET, 5 blade (OEM Equiv. with detachable coated hook and exh. stack covers on quick release clips) (set of 6) | 1 | |
| PC12-140 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| PC12-141 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| PC12-142 | PROPELLOR/SPINNER COVER, MT 5 Blade | 1 | |
| PC12-144 | INSULATED PROPELLOR/SPINNER COVER, MT 5 Blade | 1 | |
| PC12-145 | INSULATED SPINNER HUB COVER, 4 Blade | 1 | |
| PC12-146 | INSULATED SPINNER HUB COVER, 5 Blade | 1 | |
| PC21-140 | PROP/SPINNER COVER, 4-blade | 1 | |
| PC21-150 | PROP TIE DOWN/EXHAUST COVERS (4-blade, LH and RH) (set of 2) | 1 | |
| PC21-155 | PROP TIE DOWN/EXHAUST COVERS (5-blade, LH and RH) (set of 2) | 1 | |
| PC6-119 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PC6-120 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| PC6-124 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PC6-125 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| PC7-155 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PC7-160 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PC9-140 | PROP/SPINNER COVER, 4-blade | 1 | |
| PE105 | BLADE ANGLE PROTRACTOR (TABLE TYPE) | 1 | |
| PEL-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PEL-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PENK45-6/2M | Knife Probe, .157" thick x 4" blade x 6" long, 1-3MHz, Unshielded | 1 | |
| PF71-013-1 | FAN BLADE LOCK STRAPS | 1 | |
| PF71-014 | FAN BLADE LOCK STRAPS | 1 | |
| PHG57B | DOUBLE BLADED PANEL CUTTER | 1 | |
| PHG57B1 | DOUBLE BLADE PANEL CUTTER | 1 | |
| PK52A | KNIFE,PUTTY:W/HANG HOLE,STEEL BLADE | 2 | |
| PK70 | HOLDER-SEALANT SCRAPPER BLADE | 1 | |
| PN 763485 | COVER RAT BLADE | 1 | |
| POR-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| POR-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PPS-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PPS-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PR0PBLADELINERKIT | Q400 PROP BLADE LINER CHANGE KIT | 1 | |
| PS1-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| PS1-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PS2-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PS2-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PSN500 | BLADE SCRAPER | 2 | |
| PSP-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PSP-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PT101525 | BENDER M/R BLADE TAB | 1 | |
| PT19-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PT19-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PT22-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PT22-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PTH-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PTH-155 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| PUL-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PUL-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| PUL-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PUL-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| PW101843 | KIT-VIDEO,HPC 5,6/7TH STAGE BLADE | 1 | |
| PWA 101005 | MASTER BLADE | 2 | |
| PWA 101042A | PROBE: 767 LP 1.6 COMPLETE FAN BLADE KIT | 1 | |
| PWA 102240 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102241 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102244 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 2 BLADES) | 1 | |
| PWA 102245 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 2 BLADES) | 1 | |
| PWA 102248 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 1 BLADES) | 1 | |
| PWA 102249 | CHECKING FIXTURE (TYPE 1 BLADE) | 1 | |
| PWA 102335 | BENDER, COUNTER WEIGHT, TRIM BALANCE, 6TH BLADE | 1 | |
| PWA 102431 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102433 | CHECKING FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 102485 | STEP GAGE (TYPE 2 BLADE) | 1 | |
| PWA 102488 | STEP GAGE (TYPE 1 BLADE) | 1 | |
| PWA 102489 | FIXTURE, SHROUD STEP (TYPE 1 BLADES) | 1 | |
| PWA 102491 | FIXTURE, SHROUD STEP (TYPE 2 BLADES) | 1 | |
| PWA 102495 | FIXTURE, SHROUD STEP (TYPE 2 BLADES) | 1 | |
| PWA 102581 | CHECKING FIXTURE (TYPE 3 BLADE) | 1 | |
| PWA 102828 | MECHANICAL COMPRESSOR (FAN BLADE LOCK) | 5 | |
| PWA 102832 | GAGE, CROSS SHROUD/CROSS NOTCH (TYPE 1 BLADES) | 1 | |
| PWA 102836 | FIXTURE (TYPE 1 BLADE) | 1 | |
| PWA 102837 | FIXTURE, CROSS NOTCH/CROSS SHROUD (TYPE 2 BLADES) | 1 | |
| PWA 102839 | GAGE, CROSS SHROUD/CROSS NOTCH (TYPE 2 BLADES) | 1 | |
| PWA 102843 | FIXTURE (TYPE 2 BLADE) | 1 | |
| PWA 10285 | BLOCK ASSEMBLY − CONCAVE (TYPE 2 BLADES) | 1 | |
| PWA 102851 | BLOCK (TYPE 1 BLADE) | 1 | |
| PWA 102852 | BLOCK ASSEMBLY (TYPE 2 BLADES) | 1 | |
| PWA 102853 | BLOCK ASSEMBLY − CONCAVE (TYPE 2 BLADES) | 1 | |
| PWA 102855 | BLOCK ASSEMBLY − CONCAVE (TYPE 1 BLADES) | 1 | |
| PWA 104225 | STAGE LPT BLADE NOTCH GAUGE | 1 | |
| PWA 104226 | LPT BLADE NOCH GUAGE | 1 | |
| PWA 104227 | STAGE BLADE NOTCH GAUGE | 1 | |
| PWA 105280 | STEP GAGE (TYPE 3 BLADE) | 1 | |
| PWA 105281 | CHECKING FIXTURE (TYPE 3 BLADE) | 1 | |
| PWA 105282 | FIXTURE (TYPE 3 BLADE) | 1 | |
| PWA 106226 | BENDER, PNEUMATIC - HPC, 7TH AND 8TH STAGE BLADE LOCK (INITIAL BEND) | 1 | |
| PWA 106293 | BENDER, PNEUMATIC - HPC, 6TH STAGE BLADE LOCK (INITIAL BEND) | 1 | |
| PWA 10691 | FIXTURE TAB BENDING FRONT& REAR COMPR BLADES | 1 | |
| PWA 107217 | PHOTOGRAPH CARD, PHOTOGRAPH HPT, 2ND STAGE BLADE, INTERNAL SULFIDATION (TYPICAL) | 1 | |
| PWA 110921 | SOFTWARE, DISTRIBUTION ASSEMBLY - FAN BLADE | 1 | |
| PWA 111016 | FAN BLADE SPACER PULLER | 4 | |
| PWA 112306. | TOOL TO DRAIN FUEL FROM THE VARIABLE STATOR BLADE ACTUATOR. | 1 | |
| PWA 115061 | FAN BLADE FAIRING PIN PULLER | 2 | |
| PWA 115071 | PUNCH FOR FAN BLADE FAIRING. | 1 | |
| PWA 115221 | FAN BLADE SHIPPING SET | 1 | |
| PWA 115244 | FAN FRONT BLADE LOCK FIXTURES | 2 | |
| PWA 115424 | WEDGE FOR THE FAN BLADES. | 4 | |
| PWA 12373 | FIXTURE BLADE (1) | 1 | |
| PWA 16178 | EYE COMPRESSOR DISK AND BLADE ASSEMBLY | 2 | |
| PWA 16606 | MOMENT WEIGHT SCALE COMPRESSOR FAN BLADE | 1 | |
| PWA 25686 | PUCH-LPT ROTOR BLADE RIVETING | 2 | |
| PWA 28678 | BLADE HOLDING FIXTURE WITH GAGE | 2 | |
| PWA 29247 | FAN BLADE | 1 | |
| PWA 45248 | COMPRESSOR BLADE KNOCKER PULLER | 5 | |
| PWA 45833 | 8-9 STAGE BLADE EDDY CURRENT PROBE | 1 | |
| PWA 75197 | BLADE HOLDING FIXTURE | 1 | |
| PWA 75434 | BLADE NOTCH CHECKING FIXTURE | 2 | |
| PWA 75436 | BLADE NOTCH CHECKING FIXTURE | 2 | |
| PWA 75437 | BLADE NOTCH CHECKING FIXTURE | 2 | |
| PWA 75909 | PROBE-1ST STAGE FAN BLADE | 3 | |
| PWA 85196 | RING, RETAINING - HPC ROTOR ASSEMBLY; SIXTH STAGE BLADE | 1 | |
| PWA 85197 | RING, RETAINING - HPC ROTOR ASSEMBLY; SEVENTH STAGE BLADE | 1 | |
| PWA 85198 | RING, RETAINING - HPC ROTOR ASSEMBLY; EIGHT STAGE BLADE | 1 | |
| PWA 87055 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 5 | |
| PWA 87164 | HEATER, ELECTRICAL - LPT, FIFTH STAGE DISK AND BLADE ASSEMBLY REAR FACE | 1 | |
| PWA 88617 | COMPRESSOR-FAN BLADE LOCK | 5 | |
| PWA | INDICATOR GAGE (TYPE 1 BLADE) | 1 | |
| PWA 102903 | INDICATOR GAGE (TYPE 1 BLADE) | 1 | |
| PWA-28393 | RETAINER-FAN ROTOR BLADES | 5 | |
| PWA100012 | BENDER, PNEUMATIC (PREBEND, STAGE 5 BLADE LOCKS) (CHANGE LETTER A) | 1 | |
| PWA100013 | BENDER, PNEUMATIC, CHANGE LETTER B (INITIAL BEND, STAGES 7 AND 8 BLADE LOCKS), (REPLACED BY PWA 106226) | 1 | |
| PWA100014 | BENDER, PNEUMATIC (INITIAL BEND, 6TH STAGE BLADE LOCKS) (REPLACES PWA 78013 AND OPTIONS) | 1 | |
| PWA100096 | BENDER, PNEUMATIC (FINAL BEND, 6TH STAGE BLADE LOCKS) | 1 | |
| PWA10044 | ENG FAN BLADE CHG CONNECTOR | 3 | |
| PWA101005 | BLADE MASTER_[PWA101005] | 2 | |
| PWA101006 | BLADE MASTER_[PWA101006] | 1 | |
| PWA101007 | BLADE MASTER_[PWA101007] | 1 | |
| PWA101008 | BLADE MASTER_[PWA101008] | 1 | |
| PWA101009 | BLADE MASTER_[PWA101009] | 1 | |
| PWA101010 | BLADE MASTER_[PWA101010] | 1 | |
| PWA101011 | BLADE MASTER_[PWA101011] | 1 | |
| PWA101012 | BLADE MASTER_[PWA101012] | 1 | |
| PWA101013 | BLADE MASTER_[PWA101013] | 1 | |
| PWA101014 | BLADE MASTER_[PWA101014] | 1 | |
| PWA101015 | BLADE MASTER_[PWA101015] | 1 | |
| PWA101024 | DRIFT, (FOR REMOVAL OF 7TH STAGE LPT BLADE COUNTERWEIGHTS) | 1 | |
| PWA101032 | SOFTWARE, DISTRIBUTION - LPC, FAN BLADE (PWBAL) | 1 | |
| PWA101042 | PROBE, EDDY CURRENT - ENGINE ASSY, LPC, BLADE, 1.6 STAGE | 2 | |
| PWA101042A | 767 LP 1.6 COMP FAN BLADE KIT | 1 | |
| PWA101043 | STANDARD, SENSITIVITY, ENGINE ASSEMBLY, LPC, BLADE, 1.6 STAGE | 2 | |
| PWA101045 | KIT VIDEO-HPC BLADES | 1 | |
| PWA101157 | INSERT - EDGE SCRAPER (FOR P/N 56A621, 56A821, 52A121-002, 52A121-003 AND 53A321-001 BLADES.) | 1 | |
| PWA101173 | BENDER PNEUMATIC LPC 4TH STAGE BLADE LOCK (FINAL BLEND) | 1 | |
| PWA101174 | BENDER PNEUMATIC LPC 4TH STAGE BLADE LOCK (FINAL BLEND) | 1 | |
| PWA101180 | BENDER PNEUMATIC LPC 4TH STAGE BLADE LOCK (PREBEND) | 1 | |
| PWA101211 | GAGE, CROSS SHROUD - FAN BLADE | 1 | |
| PWA101211 REV NC | GAGE, CROSS SHROUD - FAN BLADE | 1 | |
| PWA101212 | MASTER, CROSS SHROUD - FAN BLADE | 1 | |
| PWA101212 REV NC | MASTER, CROSS SHROUD - FAN BLADE | 1 | |
| PWA101213 | BLOCK, SUPPORT - FAN BLADE CROSS SHROUD GAGE | 1 | |
| PWA101213 REV NC | BLOCK, SUPPORT - FAN BLADE CROSS SHROUD GAGE | 1 | |
| PWA101287 | BLADE MASTER HPC 5TH STAGE | 1 | |
| PWA101394 | MASTER SETTING BLADE LPT 3RD THRU 7TH STAGE TWIST | 1 | |
| PWA101782 | KIT-BLENDING,HPC 5,6/7TH STAGE BLADE | 1 | |
| PWA101801 | TEMPLATE-MARKING BLADE LPC | 1 | |
| PWA101843 | KIT-VIDEO,HPC 5,6/7TH STAGE BLADE | 1 | |
| PWA101965 | 12TH STAGE BLADE PLATFORM TOOL | 1 | |
| PWA101970 | CART - STORAGE, FAN BLADES | 1 | |
| PWA102146 | BENDER, PNEUMATIC (FINAL BEND, 6TH STAGE BLADE LOCKS) (REPLACES PWA 78012) | 1 | |
| PWA102171 | BENDER, PNEUMATIC (FINAL BEND, STAGES 7 AND 8 BLADE LOCKS) (REPALCES PWA 78014) | 1 | |
| PWA102240 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 2 BLADES) | 1 | |
| PWA102249 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 1 BLADES) | 1 | |
| PWA102275 | PIN,DRIFT-FAN BLADE FAIRING | 1 | |
| PWA102335 | COUNTERWEIGHT, TRIM BALANCE, 6TH BLADE | 1 | |
| PWA102431 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 2 BLADES) | 1 | |
| PWA102485 | FIXTURE, SHROUD STEP (TYPE 2 BLADES) | 1 | |
| PWA102488 | FIXTURE, SHROUD STEP (TYPE 1 BLADES) | 1 | |
| PWA102757 | WEDGE BLOCK-FAN BLADE, HPC | 5 | |
| PWA102828 | COMPRESSOR-LPC FAN BLADE | 5 | |
| PWA102836 | FIXTURE, CROSS NOTCH/CROSS SHROUD (TYPE 1 BLADES) | 1 | |
| PWA102843 | FIXTURE, CROSS NOTCH/CROSS SHROUD (TYPE 2 BLADES) | 1 | |
| PWA102849 | BLOCK ASSEMBLY (TYPE 2 BLADES) | 1 | |
| PWA102851 | BLOCK ASSEMBLY (TYPE 1 BLADES) | 1 | |
| PWA102977 | BENDER, MECHANICAL (FOR 7TH STAGE LPT BLADE COUNTERWEIGHTS) (OPTIONAL TO 88117) | 1 | |
| PWA103594 | CART STORAGE - FAN BLADES | 1 | |
| PWA104225 | STAGE LPT BLADE NOTCH GAUGE | 1 | |
| PWA104226 | LPT BLADE NOCH GUAGE | 1 | |
| PWA104227 | STAGE BLADE NOTCH GAUGE | 1 | |
| PWA105109 | PULLER KNOCKER - FAN BLADE SPACER | 1 | |
| PWA105132 | PULLER KNOCKER - FAN BLADE SPACER | 1 | |
| PWA105280 | FIXTURE, SHROUD STEP (TYPE 3 BLADES) | 1 | |
| PWA105281 | CHECKING FIXTURE, SHROUD LOCATION (TYPE 3 BLADES) | 1 | |
| PWA105282 | FIXTURE, CROSS NOTCH/CROSS SHROUD (TYPE 3 BLADES) | 1 | |
| PWA105525 | BLADE LPT 3RD STAGE TWIST CHECK | 1 | |
| PWA105609 | PROBE ECI FAN BLADE LE | 1 | |
| PWA105714 | PIN,ALIGNING-BLADE FAIRINGING | 1 | |
| PWA105767 | FIXTURE REMOVE - LPC FAN BLADE LOCK | 1 | |
| PWA105784 | PULLER MECHANICAL - BLADE LOCK RETAINER | 1 | |
| PWA106181 | PULLER KNOCKER - FAN BLADE SPACER | 1 | |
| PWA106201 | COMPRESSOR-FAN BLADE LOCK | 1 | |
| PWA106226 | BENDER, PNEUMATIC (INITIAL BEND, STAGES 7 AND 8 BLADE LOCKS) (REPLACES PWA 100013) | 1 | |
| PWA106293 | BLOCK SETTING BLADE | 1 | |
| PWA106294 | BLOCK SETTING BLADE | 1 | |
| PWA106312 | BLOCK SETTING BLADE | 1 | |
| PWA106313 | BLOCK SETTING BLADE | 1 | |
| PWA106340 | GAGE CHECKING-FAN BLADE TIP CLEARANCE | 1 | |
| PWA107214 | GAGE CHECKING-FAN BLADE TIP CLEARANCE | 3 | |
| PWA107217 | PHOTOGRAPH, INSPECTION (2ND STAGE TURBINE BLADE)_[PWA107217] | 1 | |
| PWA107309 | NOTCH GAUGE SUPPORT FOR 4TH STAGE LPT BLADE | 5 | |
| PWA107611 | CUTBACK BLADE KIT | 1 | |
| PWA107694 | KIT BLADE BLENDING | 1 | |
| PWA107918 | COMPRESSOR MECHANICAL - ENGINE ASSEMBLY, LPC FAN BLADE | 1 | |
| PWA107919 | WEDGE MECHANICAL - ENGINE ASSEMBLY, LPC FAN BLADE LOCK | 1 | |
| PWA111016 | PULLER HAND FAN BLADE | 4 | |
| PWA111529 | FIXTURE, INSTALLATION - BLADE LOCK | 5 | |
| PWA115061 | FAN BLADE FAIRING PIN PULLER | 2 | |
| PWA115244 | FAN FRONT BLADE LOCK FIXTURES | 2 | |
| PWA115424 | FAN BLADE HAND WEDGE | 4 | |
| PWA12514 | C1 BLADE WRENCH | 1 | |
| PWA12632 | FIXTURE INSPECTION BLADE FAN ROTOR | 2 | |
| PWA14098-201 | C1 BLADE REMOVAL | 1 | |
| PWA211565 | CONTAINER, SHIPPING - FAN BLADE | 1 | |
| PWA211814 | FAN BLADE INSP REF CARD | 1 | |
| PWA212377 | DRILL GUIDE - FAN BLADE | 2 | |
| PWA25686 | PUNCH - LPT ROTOR BLADE RIVETING_[PWA25686] | 2 | |
| PWA25712 | SHIM - ENG ASSY FAN BLADE TIPS_[PWA25712] | 2 | |
| PWA25757 | HOLDER SCRAPE INSERT FAN BLADE | 5 | |
| PWA25785 | PLIERS - HPC ROTOR BLADE LOCK_[PWA25785] | 2 | |
| PWA25789 | RING - HPC ROTOR ASSY BLADE RET_[PWA25789] | 1 | |
| PWA25790 | RING - HPC R/BLADE RETNG EVEN NO.STAGES_[PWA25790] | 1 | |
| PWA25806 | BOLT & NUT - TURB ROTOR 2ND BLADE_[PWA25806] | 2 | |
| PWA25871 | FIXTURE,CHECKING - BLADE,LPT 3RD NOTCH_[PWA25871] | 1 | |
| PWA25874C | CLAMP - LPT 4TH BLADE_[PWA25874C] | 1 | |
| PWA25881 | FIXTURE - CHKG, BLADE LPT 4TH NOTCH_[PWA25881] | 1 | |
| PWA25882 | MASTER - LPT 4TH BLADE NOTCH_[PWA25882] | 1 | |
| PWA25891 | FIXTURE,CHKG - BLADE, LPT 5TH STG NOTCH_[PWA25891] | 1 | |
| PWA25892 | MASTER,SETTING - BLADE,LPT 5TH NOTCH_[PWA25892] | 1 | |
| PWA26281 | HOLDER - 1ST TURBINE BLADE CHECK_[PWA26281] | 1 | |
| PWA26282 | HOLDER - HPT 2ND BLADE INSPECTION_[PWA26282] | 1 | |
| PWA26283 | HOLDER - LPT 3RD BLADE CHECK_[PWA26283] | 1 | |
| PWA26284 | HOLDER - LPT 4TH BLADE INSPECTION_[PWA26284] | 1 | |
| PWA26285 | HOLDER - LPT 5TH BLADE INSPECTION_[PWA26285] | 1 | |
| PWA26286 | HOLDER - LPT 6TH BLADE INSPECTION_[PWA26286] | 1 | |
| PWA26319 | GAGE-FEELER FAN BLADE TIP | 1 | |
| PWA26479 | SLING,LIFTING - HPC ROTOR DISK & BLADE_[PWA26479] | 1 | |
| PWA26480 | SLING,LIFTING - LPC DISK & BLADE ASSY_[PWA26480] | 1 | |
| PWA26644 | GAGE, BLADE WEAR - HPC 5TH STAGE_[PWA26644] | 2 | |
| PWA26645E | GAGE - BLADE, HPC 6TH STAGE_[PWA26645E] | 1 | |
| PWA26646F | GAGE, BLADE WEAR - HPC 7TH STAGE_[PWA26646F] | 1 | |
| PWA26647 | GAGE, BLADE WEAR - HPC 8TH STAGE_[PWA26647] | 2 | |
| PWA26648 | GAGE - BLADE, HPC 9TH STAGE_[PWA26648] | 2 | |
| PWA26649 | GAGE, BLADE WEAR - HPC 10TH STG BLADE_[PWA26649] | 2 | |
| PWA26650 | GAGE - BLADE, HPC 11TH STAGE_[PWA26650] | 2 | |
| PWA26651H | GAGE, BLADE WEAR - HPC 12TH STAGE_[PWA26651H] | 1 | |
| PWA26652 | GAGE, BLADE WEAR - HPC 13TH STAGE_[PWA26652] | 2 | |
| PWA26676 | FIXTURE FAN BLADE | 1 | |
| PWA26682 | PULLER - HPC BLADE LOCK REMOVAL_[PWA26682] | 1 | |
| PWA26683 | GAGE, BLADE WEAR - HPC 14TH STAGE_[PWA26683] | 2 | |
| PWA26684 | GAGE - BLADE WEAR, HPC 15TH STAGE_[PWA26684] | 2 | |
| PWA26872 | ADAPTER-BLADE TIP CLEARANCE_[PWA26872] | 3 | |
| PWA26899 | CLAMP - LPT 3RD STAGE BLADE TWIST_[PWA26899] | 1 | |
| PWA26900 | CLAMP - LPT 4TH STAGE BLADE TWIST_[PWA26900] | 1 | |
| PWA26901 | CLAMP,TWIST - LPT 5TH STG BLADE_[PWA26901] | 1 | |
| PWA26902 | CLAMP,TWIST - BLADE, LPT 6TH STG_[PWA26902] | 1 | |
| PWA26940 | PULLER - BLADE, HPT1ST STG BAFFLE_[PWA26940] | 1 | |
| PWA27287 | GAGE - HPT 1ST BLADE L/E EROSION_[PWA27287] | 1 | |
| PWA27360B | CLAMP - BLADE,LPT 6TH STG TWIST CHK_[PWA27360B] | 1 | |
| PWA27363 | FIXTURE - LPT 6TH BLADE NOTCH CHECK_[PWA27363] | 1 | |
| PWA27364 | MASTER,SETTING - BLADE,LPT 6TH STG NOTCH_[PWA27364] | 1 | |
| PWA27531 | FIXTURE,SUPPORTING - FAN BLADE R/I_[PWA27531] | 1 | |
| PWA27533 | FIXTURE - LOADING FAN BLADE | 1 | |
| PWA27750 | CLAMP, SPRING - 1ST STG TURB BLADE RET_[PWA27750] | 1 | |
| PWA27760 | SET, BOLT/NUT - 2ND LPT BLADE RETAINING_[PWA27760] | 2 | |
| PWA27775 | ANVIL, BACKUP - TURB BLADE RIVETING_[PWA27775] | 2 | |
| PWA27776 | PUNCH - TURB ROTOR 1ST STG BLADE RIVETG_[PWA27776] | 2 | |
| PWA27777 | PLATE, ADAPTER - TURB DISK & BLADE RIV_[PWA27777] | 2 | |
| PWA27830 | ADAPTER, LIFT & TURN - LPC 4TH D&BLADE_[PWA27830] | 1 | |
| PWA27831 | HOLDER, MOMENT WT - 1STG FAN BLADE_[PWA27831] | 1 | |
| PWA27832 | HOLDER - LPT 3RD BLADE MOMENT WEIGHT_[PWA27832] | 1 | |
| PWA27833 | HOLDER - LPT 4TH BLADE MOMENT WEIGHT_[PWA27833] | 1 | |
| PWA27834 | HOLDER - LPT 5TH BLADE MOMENT WEIGHT_[PWA27834] | 1 | |
| PWA27890 | ANVIL,BACKUP - LPC 1.5 STG BLADE TABLOCK_[PWA27890] | 2 | |
| PWA27892 | PUNCH,FINISH - LPC 1.5 STG BLADE TABLOCK_[PWA27892] | 2 | |
| PWA27894 | ANVIL,BACKUP - LPC 3RD STG BLADE TABLOCK_[PWA27894] | 2 | |
| PWA27895 | ADAPTER,PLATE - LPC 4TH BLADE TABLOCK_[PWA27895] | 2 | |
| PWA27917 | ADAPTER, PLATE - LPC BLADE TABLOCK_[PWA27917] | 2 | |
| PWA28157 | RING - 1ST TURB DISK & BLADE SUPPORT_[PWA28157] | 1 | |
| PWA28158 | CLAMP, SECURING - 1ST STG TURB BLADE_[PWA28158] | 2 | |
| PWA28224 | GAGE, NO GO - BLADE, HPC 7TH STG CHORD_[PWA28224] | 1 | |
| PWA28379 | RETAINER - FAN BLADES | 2 | |
| PWA28393 | RETAINER-FAN ROTOR BLADES | 5 | |
| PWA28403 | CRACK STANDARD-EDDY CURRENT 1ST STAGE FAN BLADE | 4 | |
| PWA28403B | PRATT & WHITTNEY 1ST STAGE FAN BLADE CALIBRATION STANDARD. Includes Test Report and Certificate of Conformance. | 1 | |
| PWA28404 | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 3 | |
| PWA28404E | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 1 | |
| PWA28443 | PROBE-EDDY CURRENT ENGINE ASSEMBLY FAN BLADE | 2 | |
| PWA28443A | PROBE-EDDY CURRENT ENGINE ASSEMBLY FAN BLADE | 1 | |
| PWA28678 | INSPECTION GAGE - MASTER BLADE_[PWA28678] | 2 | |
| PWA28818 | GAGE - FAN BLADE L/E & T/E THICKNESS_[PWA28818] | 2 | |
| PWA28909 | PULLER - 1STG TURB BAFFLE FR BLADE_[PWA28909] | 1 | |
| PWA28912 | PUSHER - COMP BLADE REM 8-15TH STG_[PWA28912] | 1 | |
| PWA29246 | FIXTURE-SUPPORT FAN BLADE REPLACEMENT | 1 | |
| PWA29646 | GAUGE - INSPECTION, FAN BLADE AND LPT STAGE 3-6 LEADING EDGE RADII | 2 | |
| PWA29819 | CUTTER - FAN BLADE FORMING L/E_[PWA29819] | 1 | |
| PWA29836 | TEMPLATE-SIGHT FAN BLADE L.E. ANGLE | 1 | |
| PWA29837 | TEMPLAT,MARKING - 1ST STG FAN BLADE_[PWA29837] | 1 | |
| PWA29875 | FILLER GAGE- FAN BLADE (JT9D-7Q)_[PWA29875] | 3 | |
| PWA29914 | CUTTER - FAN BLADE L.E. CONTOUR | 1 | |
| PWA33000 | MASTER-MIDSPAN SHROUD COMPR. FAN BLADE 1ST STG. | 1 | |
| PWA35841 | MASTER - HPT 1ST BLADE AIR FLOW CORR_[PWA35841] | 2 | |
| PWA35855 | MASTER, CORRELATION - 1ST TURB BLADE_[PWA35855] | 1 | |
| PWA35856 | MASTER, CORRELATION - 1ST TURB BLADE_[PWA35856] | 1 | |
| PWA35857 | MASTER, CORRELATION - 1ST TURB BLADE_[PWA35857] | 1 | |
| PWA35859 | MASTER, CORRELATION - 2ND TURB BLADE_[PWA35859] | 1 | |
| PWA45104 | ADAPTER-STATIC BALANCE VARIOUS DISK & BLADE ASSYS | 1 | |
| PWA45104 REV B | ADAPTER-STATIC BALANCE VARIOUS DISK & BLADE ASSYS | 1 | |
| PWA45126 | PUSHER #1 HUBS & BLADES FROM 1.5 DISK | 4 | |
| PWA45248 | COMPRESSOR BLADE KNOCKER PULLER | 5 | |
| PWA45877 | ENG FAN BLADE RUBSTRAP | 1 | |
| PWA45942 | 1ST STAGE BLADE EDDY CURRENT PROBE | 1 | |
| PWA46050 | GAGE INSPECTION FAN BLADE RUBSTRIP FOR DAMAGE | 1 | |
| PWA46083 | HOLDER, CUTTER - FAN BLADE FORMING L.E.RADIUS | 1 | |
| PWA46083 REV NC | HOLDER, CUTTER - FAN BLADE FORMING L.E.RADIUS | 1 | |
| PWA46084 | CUTTER - FAN BLADE FRMG LEAD EDGE (.009 RADIUS) | 1 | |
| PWA46084 REV A | CUTTER - FAN BLADE FORMING LEADING EDGE (.009 RADIUS) | 1 | |
| PWA46085 | HOLDER, CUTTER - FAN BLADE FORMING L.E. CHAMFER | 1 | |
| PWA46085 REV A | HOLDER, CUTTER - FAN BLADE FORMING L.E. CHAMFER | 1 | |
| PWA46086 | CUTTER - FAN BLADE FORMING LE (15 DEGREE CHAMFER) | 1 | |
| PWA46086 REV NC | CUTTER - FAN BLADE FORMING L.E.(15 DEGREE CHAMFER) | 1 | |
| PWA46087 | CUTTER - FAN BLADE FORMING LE (22 DEGREE CHAMFER) | 1 | |
| PWA46087 REV NC | CUTTER - FAN BLADE FORMING L.E. (22 DEGREE CHAMFER) | 1 | |
| PWA46131 | CUTTER, FRMG LE-2ND STAGE FAN BLADE (.001 RADIUS) | 1 | |
| PWA46131 REV NC | CUTTER, FORMING L.E.E-2ND STAGE FAN BLADE (.001 RADIUS) | 1 | |
| PWA46132 | CUTTER,FORMING LE- 2ND STAGE FAN BLADE (CHAMFER) | 1 | |
| PWA46132 REV NC | CUTTER,FORMING L.E.- 2ND STAGE FAN BLADE (CHAMFER) | 1 | |
| PWA46316 | CUTTER - FAN BLADE FRMG LEADING EDGE (.014 RADIUS) | 1 | |
| PWA46316 REV D | CUTTER - FAN BLADE FORMING LEADING EDGE (.014 RADIUS) | 1 | |
| PWA46318 | CUTTER - FAN BLADE LEADING EDGE CHAMFER | 2 | |
| PWA46318 REV B | CUTTER - FAN BLADE LEADING EDGE CHAMFER | 1 | |
| PWA46319 | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 2 | |
| PWA46319 REV NC | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 1 | |
| PWA463I8 | CUTTER - FAN BLADE LEADING EDGE CHAMFER | 1 | |
| PWA463I9 | GAGE, INPROCESS INSPECT - FAN BLADE L.E. REWORK | 1 | |
| PWA49057 | KIT-BLENDING HPC 5, 6 7 STAGE BLADE | 1 | |
| PWA49065 | TEMPLATE - PLASTIC CHORD, (PN 53A321, 54A821 AND 56A511 BLADE) | 1 | |
| PWA49117 | KIT VIDEO HPC 5 6 7 TH STAGE BLADE | 1 | |
| PWA75039 | BLOCK, SHEAR - HPT 2ND BLADE ROOT COATING TRIM | 1 | |
| PWA75039 REV NC | BLOCK, SHEAR - HPT 2ND BLADE ROOT COATING TRIM | 1 | |
| PWA75402 | INSERT, WR-BLADE, LPT #4 STG_[PWA75402] | 1 | |
| PWA75421 | INSERT, WRENCH-BLADE, LPT 6STG_[PWA75421] | 1 | |
| PWA75431 | TEMPLATE - MARKING, BLADES 52A121, 52A121-001, 52A121-002, AND 52A121-003 | 1 | |
| PWA75432 | CUTTER - RADIUS, (PN 52A121 BLADE) | 1 | |
| PWA75909 | PROBE-1ST STAGE FAN BLADE | 3 | |
| PWA75909A | PROBE-1ST STAGE FAN BLADE | 1 | |
| PWA76332 | B GAGE BLADE_[PW76332] | 1 | |
| PWA76334 | C GAGE, BLADE_[PWA76334] | 1 | |
| PWA76336 | C GAGE, BLADE_[PWA76336] | 1 | |
| PWA76338 | B GAGE, BLADE_[PWA76338] | 1 | |
| PWA78012 | BENDER, PNEUMATIC (STAGE 5 BLADE LOCKS) (REPLACED BY PWA 100012 CHANGE LETTER A, AND PWA 102146) | 1 | |
| PWA78013 | BENDER, PNEUMATIC (STAGE 6 BLADE LOCKS) (REPLACED BY PWA 100014 AND PWA PWA 100096) | 1 | |
| PWA78014 | BENDER, PNEUMATIC (STAGE 7 AND 8 BLADE LOCKS) (REPLACED BY PWA 100013 AND PWA 102171) | 1 | |
| PWA80187 | ADAPTER MOMENT WEIGHT BLADE | 4 | |
| PWA81349 | GUIDE BORESCOPE HPT 1ST STAGE TURBINE BLADE INSPECTION | 1 | |
| PWA81755 | TUBE GUIDE ENGINE ASSY HPT SECOND STAGE BLADE LPT THIRD STAGE VANE BORESCOPE | 1 | |
| PWA81760 | TUBE, GUIDE-HPT 1ST STAGE VANE & BLADE INSPECT | 3 | |
| PWA84314 | REFERENCE STANDARD FOR EDDY CURRENT TEST ON PW2000 SERIES ENGINE FAN BLADES | 1 | |
| PWA85035 | FIXTURE-SUPPORT FAN BLADE REPLACEMENT | 7 | |
| PWA85453 | FIXTURE GRINDING BLADE | 2 | |
| PWA85454 | FIXTURE GRINDING BLADE | 1 | |
| PWA85456 | FIXTURE GRINDING BLADE | 1 | |
| PWA85457 | FIXTURE GRINDING BLADE | 1 | |
| PWA85471 | FIXTURE GRINDING BLADE | 1 | |
| PWA85586 | CLAMP LOCATING BLADE LPT 4TH STAGE | 1 | |
| PWA85589 | CLAMP LOCATING BLADE LPT 4TH STAGE | 1 | |
| PWA85590 | CLAMP LOCATING BLADE LPT 5TH STAGE | 1 | |
| PWA85591 | CLAMP LOCATING BLADE LPT 6TH STAGE | 1 | |
| PWA85592 | CLAMP LOCATING BLADE LPT 6TH STAGE | 1 | |
| PWA85594 | HOLDER ROOT BLADE | 1 | |
| PWA85597 | 9TH STAGE BLADE PLATFORM TOOL | 2 | |
| PWA85598 | 10TH STAGE BLADE PLATFORM TOOL | 2 | |
| PWA85599 | 11TH STAGE BLADE PLATFORM TOOL | 1 | |
| PWA85600 | 12TH STAGE BLADE PLATFORM TOOL | 1 | |
| PWA85601 | 13TH STAGE BLADE PLATFORM TOOL | 1 | |
| PWA85602 | 14TH STAGE BLADE PLATFORM TOOL | 1 | |
| PWA85603 | 15TH STAGE BLADE PLATFORM TOOL | 1 | |
| PWA85638 | INSERT WRENCH BLADE LPT 4TH STAGE | 1 | |
| PWA85714 | GAGE EROSION BLADE | 1 | |
| PWA85715 | GAGE EROSION BLADE | 1 | |
| PWA85723 | BLOCK SHEAR BLADE LPT 5TH & 6TH STAGE | 2 | |
| PWA85768 | COMPRESSOR BLADE LENGTH | 7 | |
| PWA85846 | MASTER STRETCH GAGE BLADE | 1 | |
| PWA85852 | HOLDER STRETCH GAGE BLADE | 1 | |
| PWA86053 | TEMPLATE - MARKING, BLADE 56A821 | 1 | |
| PWA86056 | DRIFT BLADE POSITION | 1 | |
| PWA86299 | PROBE USI FAN BLADE | 1 | |
| PWA86302 | BENDER - COUNTERWEIGHT, TRIM BALANCE, 6TH BLADE | 1 | |
| PWA86447 | HOLDER MOMENT WEIGHT BLADE FAN | 1 | |
| PWA86564 | HOLDER MOMENT WEIGHT BLADE LPT | 1 | |
| PWA86651 | CART STORAGE - FAN BLADES | 1 | |
| PWA87055 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 5 | |
| PWA87055-1 | FIXTURE, SUPPORT - FAN BLADE REMOVAL | 1 | |
| PWA87251 | CART, STORAGE - FAN BLADES | 1 | |
| PWA88117 | BENDER, MECHANICAL (FOR 7TH STAGE LPT BLADE COUNTERWEIGHTS) (OPTIONAL TO 102977) | 1 | |
| PWA88284 | LPT BLADE LOCK | 1 | |
| PWA88522 | KNOCKER PULLER-LPC, PIN, FAIRING, BLADE | 1 | |
| PWA88617 | COMPRESSOR-FAN BLADE LOCK | 5 | |
| PWC24-1 | BLADES | 1 | |
| PWC27-7 | BLADES | 2 | |
| PWC30128-15 | GAGE, EDGE THICKNESS - COMPRESSOR ROTOR BLADES (EDGE GAGE THICKNESS SET) | 9 | |
| PWC30128-8 | FIXTURE, COMPRESSOR ROTOR BLADELENGTH GAGE | 2 | |
| PWC30307 | GAUGE BLADE | 1 | |
| PWC31247 | SUPPORT, BLADE RIVETING | 3 | |
| PWC32307 | GAGE, BLADE STRETCH | 1 | |
| PWC32417 | GAUGE, BLADE TIP CLEARANCE | 1 | |
| PWC32807 | MSTER BLADE | 2 | |
| PWC34407 | GAGE, TURBINE BLADE | 3 | |
| PWC34910-102 | BOROSCOPE ASSY , 4MM,HPT BLADE SHIFT | 4 | |
| PWC34910-109 | BORESCOPE INSPECTION OF THECOMPRESSOR TURBINE BLADES FOREVIDENCE OF BLADE SHIFTING | 9 | |
| PWC34910-800 | GAGE, CHORD LENGTH-COMPR ROTORBLADE (3D AERO) | 10 | |
| PWC37487 | Gage, LPT Bladed Disk Measuring | 3 | |
| PWC38428 | FIXTURE, HIGH PRESSURE TURBINE BLADES GRINDING | 1 | |
| PWC38487 | GAGE, LPT BLADE DISK MEASURING | 5 | |
| PWC39A | PWC39A REPLACEMENT BLADE | 1 | |
| PWC40014 | LOADING- BLADES-FAN | 1 | |
| PWC41200-9 | FIXTURE - BLADE | 1 | |
| PWC43320 | HOLDER - BLADE | 1 | |
| PWC45291-4 | EDM NOTCH SERVICES FOR PT BLADES | 1 | |
| PWC50062 | Masters CT Blade | 1 | |
| PWC50062-1 | Masters CT Blade N°1 | 1 | |
| PWC50062-2 | Masters CT Blade N°2 | 1 | |
| PWC50063 | GAGE STRETCH BLADE | 1 | |
| PWC50249 | ARBOR, GRINDING, P/T DISK BLADE TIP GRINDING | 2 | |
| PWC50250 | SPACER, P/T DISK BLADE TIP GRINDING | 2 | |
| PWC50707 | BLADE GROWTH TOOL | 3 | |
| PWC50832 | FEELER GAGE, BLADE TIP | 1 | |
| PWC54020 | GAGE, HIGH PRESSURE TURBINE BLADED DISK RADIUS | 4 | |
| PWC54148-100 | FIXTURE, PT DISK, BLADE TIP GRINDING | 1 | |
| PWC54255-ITEM3 | PULLERPUSHER PUSHER BLADE | 1 | |
| PWC54874 | FIXTURE MACHINING HP BLADES | 1 | |
| PWC56005 | SET, RIVET, BLADE RE | 6 | |
| PWC56337 | FIXTURE AND MASTER BLADE | 1 | |
| PWC56396 | MASTER BLADE (SET OF 4) | 1 | |
| PWC56397 | master blades | 1 | |
| PWC56398 | MASTER BLADE (SET OF 3 PIECES) | 1 | |
| PWC56980 | FIXTURE LP BLADE | 1 | |
| PWC56982 | FIXTURE LP BLADE | 1 | |
| PWC56994 | blade holder | 1 | |
| PWC57634 | BLADE HOLDER | 1 | |
| PWC60445 | ADAPTER- BLADE | 1 | |
| PWC60464 | RETAINER - HPT BLADES | 1 | |
| PWC60535 | BLADE RIVET GAGE | 3 | |
| PWC60640 | GAGE EROSION BLADE FAN | 3 | |
| PWC61419 | PROTECTOR-BLADE | 1 | |
| PWC61996 | FAN BLADE RETAINING | 3 | |
| PWC62673 | PULLER RING BLADE RET. | 3 | |
| PWC63206 | fan blade | 1 | |
| PWC64757 | Gauge CT blade growth | 1 | |
| PWC65614 | Support Blade push-out | 1 | |
| PWC66581 | WEDGE, FAN BLADE | 6 | |
| PWC67625 | Blade Stretch Fixture | 1 | |
| PWC67631 | Master Blade | 1 | |
| PWC67862 | Master blade | 1 | |
| PWC69536 | Master blades | 1 | |
| PWC69623 | Master blades | 1 | |
| PWC70506 | Master Blade | 1 | |
| PWC71568 | GAUGE, BLADE TIP CLEARANCE | 6 | |
| PWC71903 | GAGE, BLADE GROWTH | 4 | |
| PWC71904 | MASTER BLADE (SET OF 4 PIECES) | 2 | |
| PWC72099 | GAGE - BLADE GROWTH | 1 | |
| PWC72341 | GAGE CT BLADE GROWTH PT6A-140 | 1 | |
| PWC72367 | MASTER BLADE | 1 | |
| PWC85129 | BLADE INSERT | 1 | |
| PWC90269 | BLADE RATCHET | 1 | |
| PZA-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| Q400-125 | PROPELLOR/SPINNER COVERS, 6 blade (set of 2) | 1 | |
| Q400-126 | INSULATED PROPELLOR/SPINNER COVERS, 6 blade (set of 2) | 1 | |
| Q400-128 | INSULATED PROPELLOR HUB COVERS, 6 blade (set of 2) | 1 | |
| QC6827 | V2500 BLADE ROOT ULTRASONIC INSP. KIT | 1 | |
| QC6858 | TRENT BLADEROOT ULTRASONIC INSP KIT | 1 | |
| QCK-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| QCK-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| QSR-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| QSR-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| R.HV | 1/4-9/32 (FOUR BLADE REAMER) | 1 | |
| R0NTGEN30M10.09 | RÖNTGEN BAND SAW BLADE ROLL 30 M 10 X 0.65 MM 14T | 1 | |
| R114-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| R114-152 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| R114-155 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| R114-157 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| R114-700 | PITOT COVER, blade type | 1 | |
| R150-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| R150-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| R150-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| R150-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| R200-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| R200-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| R22-400 | BLADE COVERS (set of 2) | 1 | |
| R22-401 | BLADE COVERS, w/ tie downs (set of 2) | 1 | |
| R22-402 | BLADE COVERS, w/hail protection, w/ tie downs (set of 2) | 1 | |
| R22-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 2) | 1 | |
| R22-411 | BLADE COVERS (COLD WEATHER TYPE), w/ hail protection (set of 2) | 1 | |
| R22-412 | BLADE COVERS (COLD WEATHER TYPE), w/ hail protection w/ tie-downs (set of 2) | 1 | |
| R22-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| R300-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| R3K-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| R3K-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| R400-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| R400-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| R400-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| R400-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| R44-400 | BLADE COVERS, Raven I models (set of 2) | 1 | |
| R44-401 | BLADE COVERS, Raven I models, std type w/tie-downs (set of 2) | 1 | |
| R44-410 | BLADE COVERS, Raven I models, cold weather (set of 2) | 1 | |
| R44-411 | BLADE COVERS, Raven I models, hail protection (set of 2) | 1 | |
| R44-412 | BLADE COVERS, Raven I models, cold weather, hail protection (set of 2) | 1 | |
| R44-413 | BLADE COVERS, Raven I models, cold weather w/tie-downs (set of 2) | 1 | |
| R44-414 | BLADE COVERS, Raven I models, cold weather, hail protection w/tie-downs (set of 2) | 1 | |
| R44-450 | BLADE COVERS, Raven II models (set of 2) | 1 | |
| R44-451 | BLADE COVERS, Raven II models, std type w/tie-downs (set of 2) | 1 | |
| R44-460 | BLADE COVERS, Raven II models, cold weather (set of 2) | 1 | |
| R44-461 | BLADE COVERS, Raven II models, hail protection (set of 2) | 1 | |
| R44-462 | BLADE COVERS, Raven II models, cold weather, hail protection (set of 2) | 1 | |
| R44-463 | BLADE COVERS, Raven II models, cold weather w/tie-downs (set of 2) | 1 | |
| R44-464 | BLADE COVERS, Raven II models, cold weather, hail protection w/tie-downs (set of 2) | 1 | |
| R44-465 | BLADE COVERS, Raven II models, hail protection w/tie-downs (set of 2) | 1 | |
| R44-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| R44-610 | TAIL ROTOR/GEARBOX COVER, hail protection on blades | 1 | |
| R66-400 | BLADE COVERS (set of 2) | 1 | |
| R66-401 | BLADE COVERS, w/ tie-down detail (set of 2) | 1 | |
| R66-410 | BLADE COVERS, cold weather (set of 2) | 1 | |
| R66-411 | BLADE COVERS, cold weather w/tie-downs (set of 2) | 1 | |
| R66-415 | BLADE COVERS, hail protection (set of 2) | 1 | |
| R66-420 | BLADE COVERS, hail protection, w tie-down detail (set of 2) | 1 | |
| R66-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| R66-515 | BLADE TIE-DOWNS, (semi-rigid) w/telescoping attachment handle (set of 3) | 1 | |
| R700-120 | PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| R700-125 | INSULATED PROPELLOR/SPINNER COVERS, 3 Blade (set of 2) | 1 | |
| R815475-4 | BLADE DEICER | 1 | |
| R815505-0000 | BLADE SHANK TOOL | 1 | |
| R820485-1 | BLADE DEICER | 1 | |
| R820485-2 | BLADE DEICER | 1 | |
| RA-S92GSE-1608-0 | Main Rotor Blades Trolley | 1 | |
| RA-S92GSE-1618-0 | Main Rotor Blade Sling | 1 | |
| RA-S92GSE-1618-1 | Main Rotor Blade Sling | 1 | |
| RADIUS-GAUGES | 18 BLADE RDIUS GAUGE TOOL | 1 | |
| RAV-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| RAV-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| RB 92700-10309-042 | TAIL BLADE WRENCH (DE-ICE) | 2 | |
| RB T101261-101 | TUBE ASSEMBLY, BLADE FOLD KIT | 1 | |
| RB T101261-123 | Blade Lock Assembly | 1 | |
| RB T101266- 101 | BLADE BOLT BULLET | 2 | |
| RB T101266-101 | Blade Bolt Bullet | 2 | |
| RB T101270 | Blade Fold Pitch Lock Set | 1 | |
| RB T101282 | Main Rotor Blade Facing Tool | 1 | |
| RB T101422 | Main Rotor Blade Tab Bender | 1 | |
| RB T101529-131 | ROLL STAKE TOOL, TAIL ROTOR BLADE | 2 | |
| RB T101602 | Blade Support Assembly | 1 | |
| RB T101611 | Main Rotor Blade Handling Kit | 1 | |
| RB T101623 | Main Rotor Blade Support Cradle Set | 2 | |
| RB T101623-5 | Pin, Cradle Set-Support, Main Rotor Blade | 1 | |
| RB T101623-7 | Adapter, Cradle Set-Support, Main Rotor Blade | 1 | |
| RB T101623P | MAIN ROTOR BLADE SUPPORT CRADLE SET | 1 | |
| RB T101740 | TAIL ROTOR BLADE RIGGING TOOL | 2 | |
| RB T101751-101 | Tail Rotor Blade Rigging Tool | 2 | |
| RB T101828 | Transport Rack Assembly Blade Fold | 1 | |
| RB T101831 | Main Rotor Blade Lift Strap Assembly | 1 | |
| RB T101900 | Hub & Blade Main Rotor Alignment Tool | 1 | |
| RB T101996 | Main Rotor Hub Blade Bolt Drift | 1 | |
| RB T102018 | Main Rotor Blade Support Assembly | 2 | |
| RB T102046 | Main Rotor Blade Positioning Tool | 1 | |
| RB T102105 | Main Rotor Blade Tracking Fin | 1 | |
| RB T103057 | Main Rotor Blade Tab Bender Assembly | 1 | |
| RB T103072-101 | GAGE BLADE TRIM TAB | 1 | |
| RB T103073-101 | M/R BLADE TRIM TAB | 1 | |
| RB429WA-MM-64-2-1-4 | Tail Rotor Hub & Blade Work Aid #1 | 1 | |
| RB6796950-7 | PULLER PLATEFORMS FAN BLADES | 3 | |
| RBA1710-30101-4 | Tail Rotor Feathering Bearing Install Tool (4 Blade) | 2 | |
| RBD29826 | 4 Blade Tail Rotor Nut #369D21716-5 Torque Wrench Adapter | 3 | |
| RBD29931 | TAIL ROTOR RIGGING TOOL (2 BLADED) | 2 | |
| RBD29936-4BL | Tail Rotor Bungee Tool 4 Blade | 2 | |
| RBD29942 | Main Rotor Blade Tracking Tool | 2 | |
| RBE105-15103W6 | MAIN ROTOR BLADES BONDING FIXTURE | 2 | |
| RBE332A91-3191-00 | Sling, Main Rotor Head 5 Blade | 3 | |
| RBE332A93-3380-00 | TAIL ROTOR BLADE MAIN TOOL | 2 | |
| RBE350A93-1280-00 | TAIL BLADES RING EXCHANGE | 2 | |
| RBE350A94-2708-01 | Tail Rotor Blade Locking Tool | 1 | |
| RBE703A94-1130-01 | Main Rotor Blade Trim Tab Tools | 3 | |
| RBEA92-1100-00 | Main Rotor Blade Tie Down Set | 1 | |
| RBEM621V1006101 | MAIN ROTOR BLADE SLING | 2 | |
| RBMT352-1 | Gauge Assembly, Main Rotor Blade Trim Tab | 1 | |
| RBT101407 | BLADE SCOPE | 1 | |
| RBT101414 | M/R BLADE BOLT WRENCH | 3 | |
| RBT101532 | SUPPORT ASSEMBLY, BLADE ALIGNMENT SCOPE | 3 | |
| RBT101597 | M/R BLADE TAB BENDER | 2 | |
| RBT102018 | MAIN ROTOR (M/R) BLADE SUPPORT | 2 | |
| RBT18002 | Expandable Blade Bolts Inspection Work Aid | 2 | |
| RBT18006 | Tail Rotor Hub & Blade Work Aid Kit | 1 | |
| RBT18504 | Blade Bolt Bullet For Installing Blade Bolt | 1 | |
| RBT18510-61 | Blade Bolt Latch Socket | 1 | |
| RBT18526 | Main Rotor Blade Bolt Extractor | 1 | |
| RBT18543-26 | Blade Bolt Latch Socket | 1 | |
| RBT18550 | Main Rotor Blade Grip Excluder Removal Tool | 1 | |
| RBT18583 | Main Rotor Blade Latch Nut Socket | 1 | |
| RBT18635 | Tail Rotor Blade Bushing Removal Tool | 3 | |
| RBT18662 | EC120 Blade Bolt Bushing Height Check Tool | 1 | |
| RBT18664 | Main Rotor Blade Pitch Gauge | 1 | |
| RBT400298 | Main Rotor Blade Cradle Assembly (209-782-028) | 1 | |
| RBT400300 | Rotor Blade Support Assembly (209-782-031) | 1 | |
| RBT400302 | Rotor Blade Support Carrier Assembly (209-782-034) | 1 | |
| RBT400303 | Blade Support Carrier Assembly (209-782-035) | 1 | |
| RBT400306 | Rotor Blade Stabilizer Assembly | 1 | |
| RBT400307 | Blade Support Beam Assembly (209-782-040) | 1 | |
| RBT400309 | Blade Fold Rack Transport Truss Assembly (406-7482-115) | 1 | |
| RBW-3G6205G00331 | MR BLADE RETENTION BOLT TOOL | 1 | |
| RBW10001 | Large Blade Rack | 2 | |
| RBW10002 | Small Blade Rack | 2 | |
| RBW109-3101-14-1 | Main Rotor Blade Trim Tab Gauge | 2 | |
| RBW109-3101-58-1 | Hammer, Steel, Blade Corrosion and Voids Detection | 3 | |
| RBW109-3101-58-2 | Hammer, Aluminum, Blade Corrosion and Voids Detection | 3 | |
| RBW109-3130-83-101 | TOOL SET T/R HUB AND BLADE ASSEMBLY AND CROSSHEAD | 2 | |
| RBW6005G01431-3G | SUPPORT ASSY, DIAL GAUGE (M/R DAMPER BLADE SIDE) | 3 | |
| RBW6205G00331-3G | AW139 Main Rotor Blade Retention Bolt R&R Tool Kit | 2 | |
| RBW6205G00632-3G | Sling, Main Rotor Blade Lift | 2 | |
| RBW6205G03451-3G | GUIDE - M/R BLADE BOLT | 2 | |
| RBW6205G03532-3G | Main Rotor Blade Trim Tab Tool | 2 | |
| RBW6205G03832-3G | Main Rotor Blade Blocking/Protecting Assembly | 2 | |
| RBW6210G00231-6F | MAIN ROTOR BLADE RETENTION BOLT REMOVAL/INSTALL KIT | 2 | |
| RBW6210G00231-8G | MR BLADE RETENTION BOLT REMOVAL/INSTALLATION TOOL | 2 | |
| RBW6210G00331-8G | M/R BLADE TRIM TAB BENDING TOOL | 2 | |
| RBW6210G00831-6F | M/R BLADE TRIM TAB BENDING | 2 | |
| RBW6405G02131-3G | Tail Rotor Blade Damper Attachment Bushing Removal | 2 | |
| RBW895-3101- 24-101 | PIN MAIN ROTOR BLADES,RETENTION BOLT REMOVAL | 2 | |
| RBW895-3101-04-117 | Main Rotor Blade Blocking And Protector Tool | 2 | |
| RBW895-3101-04-145 | Main Rotor Blade Tab Bender | 2 | |
| RBW895-3101-04-201 | Main Rotor Blade Tab Bending | 2 | |
| RBW895-3101-24-101 | Pin Main Rotor Blade Tab Bender | 2 | |
| RBW8995-3101-04-145 | Main Rotor Blade Tab Bender | 1 | |
| RC5128G02 | GAGE KIT,BLADE,FAN-BASE | 1 | |
| RC5128P04 | FAN BLADE PIN BASE COAT GAGE | 1 | |
| RC5128P10 | FAN BLADE PIN BASE COAT GAGE | 1 | |
| RCAD1817 | Utility Knife (w/spare Blade) | 1 | |
| RD-AC-1013 | MDS TIP (BLADE KNIFE) | 1 | |
| REN-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| REN-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| REV-110 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| REY-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| REY-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| REY-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| REY-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| RF170066 | WRENCH – FAN BLADES RING REMOVAL | 1 | |
| RF171464 | PULLER FAN BLADES SPACER | 1 | |
| RF178652 | PULLER FAN BLADES SPACER | 1 | |
| RF4-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RF4-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RFC11Z1P0A | BLADE,PROPELLER,AIRCRAFT | 1 | |
| RG3-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RG3-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RG3-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RG3-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| RIDGID TC-40 | CUTTER, POWER, MULTILAYER PLASTIC PIPE CUTTER, MATL STEEL BLADE, PLASTIC HOUSING, CAP 40 MM OD (MULTI LAYER), 42 MM OD (SNGLE LAYER), 2.5 MM WALL THK, RATING 100 - 240 VAC, 190 MA, 50/60 HZ, 12 V RECHARGEABLE LI-ION BATTERY | 1 | |
| ROB-120 | PROPELLOR/SPINNER COVER, 2 BLADE | 1 | |
| ROB-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RRT027013 | BLADE RING | 1 | |
| RRT027187 | IC BLADE RETAINING RING GAUGE | 1 | |
| RRT027633 | BLADE SCISSOR LIFTER | 1 | |
| RRT027741 | PROTRACTOR BLADE | 1 | |
| RRT028110 | BLADE DRIFT TIP (STAGE 7 & 8) | 1 | |
| RRT029433 | ADAPTOR - LIFT BLADED OR NON BLADED LP COMPRESSOR | 1 | |
| RRT029784 | BLADE HOLDER | 1 | |
| RRT030944 | BLADE RING | 1 | |
| RRT042047 | MASTER BLADE | 1 | |
| RRT050245 | DUMMY FANSHAFT FOR BLADES & FAN DISC BALANCE | 1 | |
| RRT050249 | TRANSPORT FULL FAN INCL BLADES (TILTS) | 1 | |
| RRT050462 | BLADE RING | 1 | |
| RRT051358 | BLADE LIFT TOOL | 1 | |
| RRT061241 | FAN BLADE IMMOBILISER / CHOCK | 4 | |
| RRT068175 | BLADE RING | 1 | |
| RRT068175-1 | Blade Ring | 1 | |
| RRT076133 | BLADE INSPECTION KIT | 1 | |
| RRT076135 | FAN BLADE HOLDER | 1 | |
| RRT109933 | HPT BLADE GUIDE TUBE | 1 | |
| RRT115160 | BLADE BLADE INSPECTION KIT | 1 | |
| RRT1151600 | TRENT 700 FAN BLADE ULTRASONIC INSPECTION KIT | 1 | |
| RRT115161 | FAN BLADE SCANNING FRAME | 1 | |
| RRT115168 | FAN BLADE HOLDER STAND | 1 | |
| RRT116163 | EDM NOTCHED LP COMPRESSOR BLADE | 1 | |
| RRT131971 | TRAINING FAN BLADE | 1 | |
| RS10-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RS10-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RS19-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RS19-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RS20-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RS20-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RS21-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RS21-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RS6-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RS6-155 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RS7-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RS7-151 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RS7-155 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RS7-156 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| RS9-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RS9-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RSB-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RSB-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RSB-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| RSB-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| RSB-150 | PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| RSB418PM | 5 PK PREC MTL BLADE 4IN 18TPI | 1 | |
| RSB424PM | 5 PK PREC MTL BLADE 4IN 24TPI | 1 | |
| RSB6812JY | 5pk 6" 8 TPI JUNKYARD BLADE | 1 | |
| RSB97WB | 5PK 9IN WOOD BLADE 7TPI | 1 | |
| RSB9812JY | 5 PK JUNKYARD BLADE 9IN | 1 | |
| RSE1048 | V BLADE ALIGNING TOOL | 1 | |
| RSE1048 REV A | V BLADE ALIGNING TOOL | 1 | |
| RSEI048 | V BLADE ALIGNING TOOL | 1 | |
| RSN-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RSN-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RST2087/4037 | TAIL BLADE BEARING STAKE TOOL | 1 | |
| RSTOB-1 | TORLON BLADES / SCRAPER 1 INCH | 1 | |
| RV10-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV10-122 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV10-125 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV10-127 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV12-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV12-151 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV12-152 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV12-153 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV14-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV14-122 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV14-125 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV14-127 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV15-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV15-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RV15-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV15-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| RV3-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV3-115 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV4-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV4-111 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV4-115 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV4-116 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV6-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV6-111 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV6-112 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV6-113 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV7-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV7-111 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV7-112 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV7-113 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV8-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV8-112 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV8-115 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV8-117 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV9-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV9-115 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RV9-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RV9-125 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| RW-8BT144-B429-S | MR BLADE DOLLY | 1 | |
| RW-8BT144-B429S | BLADE DOLLY | 1 | |
| RWN-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| RWN-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| RWS006W | CARPET BLADE | 1 | |
| S0496-001-001AM | FAN BLADE STAND 737 | 1 | |
| S10-049 | STANLEY 10-049 Silver Powder-Coated 6.9 Folding Blade Pocket Knife | 1 | |
| S10-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| S10-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| S108-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| S108-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| S1201500500000 | ATR PROPELLER BLADE STRAP | 3 | |
| S1670-15002-2 | CHECKING UNIT BIM BLADES | 1 | |
| S18-120 | PROPELLOR/SPINNER COVER, 2 BLADE | 1 | |
| S18-125 | INSULATED PROPELLOR/SPINNER COVER, 2 BLADE | 1 | |
| S18-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| S18-135 | INSULATED PROPELLOR/SPINNER COVER, 3 BLADE | 1 | |
| S205-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| S205-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| S205-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| S205-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| S237-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| S237-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| S260-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| S260-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| S260-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| S260-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| S330-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| S330-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| S340-130 | PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| S340-131 | INSULATED PROPELLOR/SPINNER COVERS, 4 Blade (set of 2) | 1 | |
| S503-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| S503-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| S51-150 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| S51-155 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| S58-400 | BLADE COVERS (set of 4) | 1 | |
| S58-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| S58-500 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| S58-600 | TAIL ROTOR BLADE COVERS (set of 4) | 1 | |
| S58-620 | TAIL ROTOR BLADE TIE-DOWNS (set of 4) | 1 | |
| S58T-400 | BLADE COVERS (set of 4) | 1 | |
| S58T-410 | BLADE COVERS (COLD WEATHER TYPE) (set of 4) | 1 | |
| S58T-501 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| S58T-600 | TAIL ROTOR BLADE COVERS (set of 4) | 1 | |
| S58T-621 | TAIL ROTOR BLADE TIE-DOWNS (set of 4) | 1 | |
| S600-120 | PROPELLOR/SPINNER COVER , 3 Blade | 1 | |
| S600-125 | INSULATED PROPELLOR/SPINNER COVER , 3 Blade | 1 | |
| S61-200 | MAIN BLADE TIE DOWNS (set of 5) | 1 | |
| S61-205 | BLADE COVERS (set of 5) | 1 | |
| S61-210 | BLADE COVERS (COLD WEATHER TYPE) (set of 5) | 1 | |
| S61-400 | TAIL ROTOR BLADE COVERS (set of 5) | 1 | |
| S6170-70076-1 | BLADE HANDLER (S61 TOOLING) | 1 | |
| S6170-70500-1 | STOWAGE INSTALLATION MAIN BLADE KIT | 1 | |
| S64-200 | BLADE COVERS (set of 6) | 1 | |
| S64-205 | BLADE COVERS (COLD WEATHER TYPE) (set of 6) | 1 | |
| S64-400 | TAIL ROTOR COVER, hub and blades (set of 5) | 1 | |
| S64-405 | TAIL ROTOR COVER, hub and blades (insulated) (set of 5) | 1 | |
| S700M1479-69D | BLADE COVERS (COLD WEATHER TYPE) (SET OF | 1 | |
| S76-200 | BLADE COVERS (Cold Weather Type) (set of 4) | 1 | |
| S76-210 | BLADE COVERS, S76D model, (Standard Type) (set of 4) | 1 | |
| S76-215 | BLADE COVERS, S76D model, (Cold Weather Type) (set of 4) | 1 | |
| S76-300 | TAIL ROTOR BLADE COVERS (set of 4) | 1 | |
| S76-311 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| S76-315 | BLADE TIE-DOWNS w/semi-rigid upper & lower surfaces (set of 4) | 1 | |
| S76-316 | BLADE TIP WARNING COVERS (padded, with RBF streamers) (set of 4) | 1 | |
| S76DBF-2600-205 | S76D BLADE CLAMP | 1 | |
| S76DBF-2600-207 | S76D BLADE CLAMP | 1 | |
| S76DBF-900-1 | S-76 BLADE FOLD KIT | 1 | |
| S92-400 | BLADE COVERS (cold weather type) (set of 4) | 1 | |
| S92-500 | TAIL ROTOR BLADE COVERS (set of 4) | 1 | |
| S92BF-100-1 | S-92 BLADE FOLD KIT | 1 | |
| SAF-400 | BLADE COVERS (set of 2) | 1 | |
| SAF-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| SAG18025 | BLADES | 1 | |
| SAS-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SAS-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SAV-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SB211-72-C878 | FAN BLADE ROOT ULTRASONIC TOOL | 1 | |
| SBRB211-72-C545 | FAN BLADE ANNULAS TOOL | 1 | |
| SBRB211-72-C879 | FAN BLADE ROOT ULTRASONIC INSP.K TOO | 1 | |
| SBV2500-ENG-72-0316 | NDT KIT BLADE ROOT V2500 TOOL | 1 | |
| SC-1 | 3 Blade Single Hand Crimper | 6 | |
| SCA-3618A67 | 11-SET NONSCRATCH PLASTIC BLADE FLAT-SEALANT | 1 | |
| SCREW-THREAD-GAUGE | 30 BLADE SCREW GAUGE TOOL | 1 | |
| SD12579-1 | WRENCH PROPELLER BLADES | 2 | |
| SD4-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SD4-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SEA-150 | PROPELLOR/SPINNER COVER, 2 blade | 2 | |
| SEA-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SF25-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SF25-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SFR-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SFR-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SG5ASA | AWL,SCRATCH:1 BLADE,4.75 IN.NOM BLADE LG | 1 | |
| SG5ASABR | AWL,SCRATCH:1 BLADE,4.75 IN.NOM BLADE LG | 1 | |
| SG703A94-1130-01 | BLADE TRIM TAB | 1 | |
| SGDE33ESD | FLAT TIP 3/32" ELECTRONIC THIN BLADE SCREWDRIVER | 1 | |
| SGDE70 | ELECTRONIC STRAIGHT BLADE | 3 | |
| SGDMRC4-F10 | BLADE 5/16IN INT | 1 | |
| SGDMRC4-F7 | 7/32 BLADE/FLAT INT | 1 | |
| SGDMRC4-F8 | 1/4 BLADE/FLAT INT | 1 | |
| SGDMRC4-P1 | NO.1 PHILLIPS BLADE INT | 1 | |
| SGDMRC4-P2 | NO.2 PHILLIPS BLADE INT | 1 | |
| SGDMRC4-P3 | BLADE NO.3PH INT | 1 | |
| SH-215 | BLADE,BANDSAW,MEAT CUTTING;|BLADE,BANDSAW,MEAT CUTTING; | 1 | |
| SHB-150 | PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| SHB-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade (set of 2) | 1 | |
| SHB-160 | PROPELLOR/SPINNER COVER, 4 Blade (set of 2) | 1 | |
| SHB-165 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade (set of 2) | 1 | |
| SHB-170 | PROPELLOR/SPINNER COVER, 5 Blade (set of 2) | 1 | |
| SHB-175 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade (set of 2) | 1 | |
| SHD1G | SCREWDRIVER, FLAT TIP, 1/4" BLADE, 2" | 1 | |
| SHD2G | SCREWDRIVER, FLAT TIP, 7/32" BLADE, 3" | 1 | |
| SHD4G | SCREWDRIVER, FLAT TIP, 1/4" BLADE, 4" | 1 | |
| SHD6G | SCREWDRIVER, FLAT TIP, 5/16" BLADE, 6" | 1 | |
| SHD8G | SCREWDRIVER, FLAT TIP, 3/8" BLADE, 8" | 1 | |
| SHK-115 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SHK-117 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SHW-140 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SHW-145 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SJ201 | KIT - BORESCOPE, BLENDING HPC ROTOR BLADES | 2 | |
| SJR-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SJR-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SKA-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SKA-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SKB-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SKB-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SKR-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SKR-151 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SKY-111 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SKY-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SKY-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SKY-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SL2-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SL2-121 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SL4-150 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SL4-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SL5-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SL5-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SM-11 | BLADE SCAPEL 11 SWAN MORTON | 1 | |
| SM14-120 | PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| SM14-125 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| SM16-110 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| SM16-115 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| SM9-110 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| SM9-115 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| SMA877045 | ANTENNA BLADE | 1 | |
| SMJ534-370-000-001 | MAIN ROTOR BLADE LOCK | 1 | |
| SNX-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SNX-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SON-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SON-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SOR-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SOR-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SP20-125 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SP20-130 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SP200 | CHIP CHASER BLADE | 2 | |
| SPC-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SPC-121 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SPD70150-011-041 | MAIN ROTOR BLADE - CONTAINER | 1 | |
| SPL-11481 | FAN BLADE REAR SHANK GAUGE | 1 | |
| SPL-14662 | PULLER - FAN BLADE SPACER | 1 | |
| SPL-14677 | RACK - FAN BLADE STORAGE | 1 | |
| SPL-15042 | PULLER - FAN BLADE SPACER | 1 | |
| SPL-15594 | SOFTWARE, MAPPING - FAN BLADE | 1 | |
| SPL-16077 | FAN BLADE SPACER PULLER | 1 | |
| SPL-18784 | ZONING TOOL, ROOT RADIUS - FAN BLADE | 1 | |
| SPL-2193 | PULLER - SPACERS, FAN BLADE 856A3707G06 856A3905G0 | 1 | |
| SPL-8868 | BLADE PROTECTIVE COVER | 1 | |
| SPZ-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SPZ-151 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SQZ150003-SBL | SPARE BLADE BOX | 1 | |
| SR20-145 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SR20-146 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SR20-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SR20-151 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SR22-145 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SR22-146 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SR22-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SR22-155 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SR22-160 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| SR22-165 | INSULATED PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| SRL-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SRL-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SRTXJUZD | PLASTIC RAZOR BLADE SCRAPER 20PCS PLASTIC RAZOR BLADES,3 KINDS OF TWO-WAY SCRATCH FREE PLASTIC | 1 | |
| SS3289C | SD BLADE & HDL REPL GUIDE 2024 | 1 | |
| SSD4100CRB | BLADE SLOTTED 10IN | 1 | |
| SSDE42C | ELEC. THIN BLADE SCREWDRIVER | 1 | |
| SSDE44C | THIN BLADE ELECTRONIC SCREWDRIVER | 1 | |
| SSDE48C | ELEC. THIN BLADE SCREWDRIVER | 1 | |
| SSDE610C | PHILLIPS® .030 X 3/16" ELECTRONIC THIN BLADE SCREWDRIVER | 1 | |
| SSDE64C | SCREWDRIVER, FLAT TIP, ELECTRONIC THIN BLADE .028 X 3/16"7-9/16" LONG | 1 | |
| SSDE64ESD | SCREWDRIVER, FLAT TIP, ELECTRONIC THIN BLADE .028 X 3/16"7-9/16" LONG | 1 | |
| SSDP101CRB | BLADE PH NO1 10IN | 1 | |
| SSDP102CRB | BLADE PH NO2 10IN | 1 | |
| SSDT310RB | T10 3IN L REPLACEMENT BLADE | 1 | |
| SSDT315RB | T15 3IN L REPLACEMENT BLADE | 1 | |
| SSDT320RB | T20 3IN L REPLACEMENT BLADE | 1 | |
| SSDT36RB | T6 3IN L REPLACEMENT BLADE | 1 | |
| SSDT425RB | T25 4IN L REPLACEMENT BLADE | 1 | |
| SSDT427RB | T27 4IN L REPLACEMENT BLADE | 1 | |
| SSDT430RB | T30 4IN L REPLACEMENT BLADE | 1 | |
| SSDT640RB | T40 6IN L REPLACEMENT BLADE | 1 | |
| SSDT645RB | T45 6IN L REPLACEMENT BLADE | 1 | |
| SSX18P133-1 | BREAD CUTTER BLADE | 1 | |
| ST-99E | KNIFE STANLEY 99E RETRACTABLE BLADE | 1 | |
| ST2222-29 | BRAND: BOEING SPECIFICATION: ULTRA PRECISION MACHINED DIE TYPE BLADES | 1 | |
| ST6-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| STA-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| STA-115 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| STD-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| STD-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| STD-160 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| STD-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| STN-125 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| STN-130 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| STS-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| STS-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SU26-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SU26-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SU29-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SU29-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SUN-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SUN-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SUN-160 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SUN-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SVG-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| SVG-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SVG-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| SVG-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| SW1-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SW1-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| SWE 13875-30 | HUB BLADE ADAPTER | 1 | |
| SWE 846390 | PLATE BLADE | 1 | |
| SWE13852-750 | ADAPTER,HUB-BLADE | 1 | |
| SWE13875-30 | HUB/BLADE ADAPTER | 1 | |
| T-4020-4801 | 25 PC FEELER BLADE SET | 1 | |
| T-60219714 | HYDE 42115 BLADES 5PK | 1 | |
| T-770218 | Taylor Tool - Replacement Blades for our T-7702 - 18 Teeth per inch - pack of 10 | 1 | |
| T-770224 | Taylor Tool - Replacement Blades for our T-7702 - 24 Teeth per inch - pack of 10 | 1 | |
| T-770232 | Taylor Tool - Replacement Blades for our T-7702 - 32 Teeth per inch - pack of 10 | 1 | |
| T-855 | UTILITY BLADE RETRACT BLADE | 1 | |
| T-DW4856 | ALL PURPOSE BLADES | 1 | |
| T101261-101 | TUBE ASSEMBLY, BLADE FOLD KIT | 1 | |
| T101261-123 | BLADE LOCK ASSEMBLY | 1 | |
| T101266 | BLADE BOLT TOOL | 1 | |
| T101266-101 | BLADE BOLT, BULLET | 1 | |
| T101266-103 | ALIGNMENT TOOL, BLADE BOLT BULLET | 1 | |
| T101401 | SCOPE ASSEMBLY, MAIN ROTOR BLADE ALIGNMENT | 1 | |
| T101411 | BLADE PIN SOCKET | 1 | |
| T101414 | M/R BLADE BOLT WRENCH | 1 | |
| T101529 | ROLL STAKE TOOL, TAIL ROTOR BLADE | 1 | |
| T101529-131 | ROLL STAKE TOOL, TAIL ROTOR BLADE | 1 | |
| T101532 | SUPPORT ASSEMBLY, BLADE ALIGNMENT SCOPE | 1 | |
| T101597 | M/R BLADE TAB BENDER | 1 | |
| T101623 | Main Rotor Blade Support Cradle Set | 1 | |
| T101623-01 | CRADLE SET, SUPPORT, MAIN ROTOR BLADE | 1 | |
| T101740 | T/R BLADE RIGGING TOOL | 2 | |
| T101751-101 | TAIL ROTOR BLADE RIGGING TOOL | 1 | |
| T101807-101 | BLADE RACK | 1 | |
| T101835-101 | BLADE REPAIR KIT | 1 | |
| T101996 | DRIFT M/R HUB BLADE BOLT | 1 | |
| T102018 | BLADE SUPPORT | 1 | |
| T103072-101 | GAGE BLADE TRIM TAB | 1 | |
| T103073-101 | M/R BLADE TRIM TAB | 1 | |
| T17-110 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| T17-115 | INSULATED PROPELLOR/SPINNER COVERS, 2 Blade (set of 2) | 1 | |
| T18-110 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| T18-115 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| T2002 | POPELLER CARTS HUB AND BLADES | 1 | |
| T211-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| T211-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| T211-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| T211-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| T28-160 | PROPELLOR/SPINNER COVER, 2 blade, no spinner | 1 | |
| T28-165 | INSULATED PROPELLOR/SPINNER COVER, 2 blade, no spinner | 1 | |
| T28-170 | PROPELLOR COVER No Spinner, 3 Blade | 1 | |
| T28-175 | INSULATED PROPELLOR COVER No Spinner, 3 Blade | 1 | |
| T34-125 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| T34-126 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| T34-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| T34-131 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| T50-120 | PROPELLOR/SPINNER COVERS, 2 blade | 1 | |
| T50-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade | 1 | |
| T50-130 | PROPELLOR/SPINNER COVERS, 3 blade | 1 | |
| T50-135 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade | 1 | |
| T51-200 | PROPELLOR/SPINNER COVER, 3-blade | 1 | |
| T51-201 | INSULATED PROPELLOR SPINNER COVER, 3-blade | 1 | |
| T51-205 | PROPELLOR/SPINNER COVER, 4-blade | 1 | |
| T51-206 | INSULATED PROPELLOR SPINNER COVER, 4-blade | 1 | |
| T67-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| T67-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| T67-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| T67-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| T6A-120 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| T6A-125 | INSULATED PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| T72330033 | TABLE FOR BRAKING C1 BLADES | 1 | |
| T72340119 | BLADE RETAINER INSTALL STG 1, 4 & 5 | 1 | |
| T72340170 | PROTECT HPT BLADES AND HOTR ASSEMBLY | 1 | |
| TAY-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TAY-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TB - 14 | DRUM ROTOR AND BLADES | 1 | |
| TB-23-75 | TORLON GAP BLADES | 1 | |
| TB1125070T4 | BLADE-SCREWDRIVER | 1 | |
| TB1250S052T4 | BLADE-SCREWDRIVER | 1 | |
| TB1312S075T4 | BLADE-SCREWDRIVER | 1 | |
| TB20-140 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TB20-145 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TB20-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TB20-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| TB30-140 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TB30-145 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TB3038G001 | IGV BLADE HOLDING FIXTURE | 1 | |
| TB3074G001 | Erosion Checker (Primary & Inter Blade) | 1 | |
| TB3120G001 | Blade Setting Fixture | 1 | |
| TB3128G001 | Blade Locking Fixture | 1 | |
| TBF-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| TBF-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| TBL030 | BLADE PROBE | 1 | |
| TBL030-6 | .030" Thick, 6" long, Straight Blade Probe 50-500Khz, Triax Connecter | 1 | |
| TBL045-6 | .045" Thick, 6" long, Straight Blade Probe 50-500Khz, Triax Connecter | 1 | |
| TBL060-6 | .060" Thick, 6" long, Straight Blade Probe 50-500Khz, Triax Connecter | 1 | |
| TBL09-1.2R-6 | .090" Blade Probe, 1.2" Radius, Triax, 50-500KHz | 1 | |
| TBL090-6 | .090" Thick, 6" long, Straight Blade Probe 50-500Khz, Triax Connecter | 1 | |
| TBL360-6 | BLADE PROBE, 30° x .060" Thick, 50-500KHz, 6" Long, Triax Connector | 1 | |
| TBL390-6 | BLADE PROBE, 30° x .090" Thick, 50-500KHz, 6" Long, Triax Connector | 1 | |
| TBLC.030-6 | BLADE PROBE | 1 | |
| TBLF060-6 | .060" Thick Max, 6" long, Straight Blade Probe 100-500Khz, Shielded ABS Bridged, Only Sensor (1 Sided Only), Triax Connector | 1 | |
| TBLFC.030-6 | BLADE PROBE, .030 THICK | 1 | |
| TBM-170 | PROPELLOR/SPINNER COVER, 4 blade | 1 | |
| TBM-171 | PROPELLOR/SPINNER COVER, 5 blade | 1 | |
| TBM-175 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| TBM-176 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| TC8-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TC8-131 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TC8-135 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TCA-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TCA-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TCB-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TCB-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TCB-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TCB-135 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TCE-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TCE-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TCE-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TCE-135 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TCR-115 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TCR-117 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TCS-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TCS-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TCS-130 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TCS-135 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TCT-120 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| TCT-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| TCX-130 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TCX-135 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TCX-140 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TCX-145 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TE-50456 | TERMINAL, BLADE 14-18 GA | 1 | |
| TEA-110 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TEA-115 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TECHSHEARS | TECHSHEARS WITH STD BLADES | 1 | |
| TEG-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TEG-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TEK-1537-1 | Helicopter blade thread probe 50-500K (HO-V485UP-DFR) | 1 | |
| TEK-7002/4F | PROBE-EDDY CURRENT 1ST STAGE FAN BLADE LEAD.TRAIEDGE | 1 | |
| TEK-7009 | PROBE-EDDY CURRENT ENGINE ASSEMBLY FAN BLADE | 1 | |
| TEK-9117 | CRACK STANDARD-EDDY CURRENT 1ST STAGE FAN BLADE | 1 | |
| TEK-C73049933 | Fan Blade Probe with dual bnc's | 1 | |
| TEX-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TEX-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TGBA-001 | HOLDER ADAPTER FOR GAP BLADES | 1 | |
| TH100-B | FAN BLADE TAP TEST TOOL | 1 | |
| THFBSM325 | T@H STR 25 BLADE METRIC SET | 1 | |
| THR-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| THR-121 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| THR-122 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| THR-123 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| THR-124 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| THR-125 | INSULATED PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| THR-126 | PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| THR-127 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| TK1573-918 | FEEDBACK RING PULLER - 3 BLADE | 2 | |
| TK1573-918-1 | FEEDBACK RING PULLER - 4 BLADE (NOT USE) ATA 61 | 2 | |
| TL-5594 | PROP BLADE TOOLS | 2 | |
| TL1938 | BLADE RETAINER INSTALL STG 1 | 1 | |
| TL1939 | BLADE RETAINER INSTALL STG 4 | 1 | |
| TL1940 | BLADE RETAINER INSTALL STG 5 | 1 | |
| TL5350 | RETAINER BLADE TOOL | 1 | |
| TL5377 | CLAMP-PROPELLER BLADE | 1 | |
| TL5594 | CLAMP BLADE HOLDER | 2 | |
| TLK-115 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TLK-117 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TLR-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| TLR-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| TLS-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TLS-125 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TLT-115 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TLT-117 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TM0131 G004 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRES. BLADES | 1 | |
| TM0131G004 | INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 1 | |
| TM30010-1 | ADAPTOR ROTOR 1 BLADES | 1 | |
| TM30015-1 | ADAPTOR ROTOR 2 BLADES | 1 | |
| TM30025-1 | ADAPTOR ROTOR 4 BLADES | 1 | |
| TM30030-1 | ADAPTOR ROTOR 5 BLADES | 1 | |
| TM30035-1 | ADAPTOR ROTOR 6 BLADES | 1 | |
| TM4232G001 | ENGINE TURBINE BLADE EROSION CHECK FIXTURE | 2 | |
| TM6935G001 | EROSION GAGE INSPECTION TEMPLATE ASSY FOR AXIAL COMPRESSOR BLADES | 2 | |
| TM6936G001 | ENGINE TURBINE BLADE EROSION CHECK FIXTURE | 3 | |
| TMC-W1 | BLADE PACK | 1 | |
| TMC-W3 | CABLE STRIPPER BLADE | 1 | |
| TMC-W4 | BLADE PACK | 1 | |
| TMC-W7 | BLADE PACK | 1 | |
| TMC-W8 | BLADE PACK | 1 | |
| TMH BS12-00-00 | Blade Lifter (same as GS520871-1) | 3 | |
| TMH SD18 | Propeller Support Removal & Installation Blades -Transport & Storage Dolly - PW120/PW124 | 1 | |
| TMH SD38 | Propeller Support Removal & Installation Blades -Transport & Storage Dolly - PW120/PW124 | 1 | |
| TMHBS 12-00-00 | BLADE LIFTER | 3 | |
| TMHBS12-00-00 | Blade Lifter | 3 | |
| TMHBS120000 | BLADE HANDLING & R/I SOCKET | 3 | |
| TNG-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TNG-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TRA-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TRA-151 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TRA-152 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| TRA-153 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| TRA-154 | PROPELLOR/SPINNER COVER, 4 Blade | 1 | |
| TRA-156 | PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| TRA-157 | INSULATED PROPELLOR/SPINNER COVER, 5 Blade | 1 | |
| TRG-115 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TRG-117 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TRI-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| TRI-122 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| TRI-125 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TRI-127 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| TSB 1200 | ENDUROSHARP TORLON SCRAPER BLADES | 1 | |
| TSB 500 | ENDUROSHARP TORLON SCRAPER BLADES ENDUROSHARP | 1 | |
| TSB 750 | TORLON SCRAPER BLADES | 1 | |
| TSB0500 | ENDUROSHARP TORLON SCRAPER BLADES ENDUROSHARP | 1 | |
| TSB0750 | TORLON SCRAPER BLADES | 1 | |
| TSB1200 | ENDUROSHARP TORLON SCRAPER BLADES | 1 | |
| TSB130523 | TCT SAW BLADE | 1 | |
| TSB3305212 | TCT SAW BLADE FOR ALUMINUM | 1 | |
| TSP11 | SLOTTED MOPAR BLADE | 1 | |
| TSP2 | NON-SLOTTED MOPAR BLADE | 1 | |
| TTR-120 | PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| TTR-125 | INSULATED PROPELLOR/SPINNER COVERS, 2 blade (set of 2) | 1 | |
| TTT-119/109-Kit | BLADE TAB BENDING TOOL | 1 | |
| TTT-119A | BLADE TAB BENDING TOOL | 1 | |
| TXC-120 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| TXC-125 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| U06A610000A | PROPELLER TOOL SET- 5 BLADE | 1 | |
| U15-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| U21-151 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| U21-155 | PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| U21-156 | INSULATED PROPELLOR/SPINNER COVERS, 3 blade (set of 2) | 1 | |
| U8620044 | BLADE PROBE MP.060-60BL | 1 | |
| U8620303 | MP.045-60BL SURFACE BLADE PROBE | 1 | |
| UH12-400 | BLADE COVERS (set of 2) | 1 | |
| UH12-410 | BLADE COVERS, cold weather type (set of 2) | 1 | |
| UH12-500 | BLADE TIE-DOWNS (fabric type) (set of 2) | 1 | |
| UH12-610 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| UH60-305 | ROTOR HUB COVER w/ skirt & blade extension | 1 | |
| UH60-306 | ROTOR HUB COVER w/ skirt & blade extension (INSULATED) | 1 | |
| UH60-400 | BLADE COVERS (cold weather type) (set of 4) | 1 | |
| UH60-406 | BLADE COVERS w/ tie down attachment (set of 4) | 1 | |
| UH60-410 | BLADE TIE DOWNS (set of 4) | 1 | |
| UH60-600 | TAIL ROTOR BLADE COVERS (set of 4) | 1 | |
| UH60-601 | TAIL ROTOR BLADE COVERS (priced separately) | 1 | |
| UH60-605 | TAIL ROTOR BLADE TIE-DOWNS (set of 2) | 1 | |
| UH72-200 | BLADE COVERS, special detail for fixed static wick (set of 4) | 1 | |
| UH72-205 | BLADE COVERS, special detail for fixed static wick (Cold Weather Type) (set of 4) | 1 | |
| UH72-220 | BLADE TIE-DOWNS (fabric type) (set of 4) | 1 | |
| UKBU10 | 10 PCS BLADES UTILITY | 2 | |
| UKBU50PK | BLADES, UTILITY KNIF | 2 | |
| UL38059 | HPT BLADES | 1 | |
| UPF7-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| UPF7-121 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| UPF7-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| URL-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| URL-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| URL-160 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| URL-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| URS-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| URS-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| URS-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| URS-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| USN60 | ULTRASONIC IZ FAN BLADE | 2 | |
| UT1689 | BLADE ARRAY SOFTWARE | 1 | |
| UT1930 | FAN BLADE ERROSION INSP TOOL | 1 | |
| UT1930-1 | FAN BLADE ERROSION INSP TOOL | 1 | |
| UT1930-2 | FAN BLADE ERROSION INSPECTION | 1 | |
| UT2000 | FAN BLADE TEST KIT | 2 | |
| UTK100 | KNIFE, UTILITY, RETRACTABLE BLADE | 2 | |
| UTV614A | DOOR PANEL V DBLE STEP BLADE | 1 | |
| UTV615A | DOOR PANEL U BLADE | 1 | |
| UTV616A | DOOR PANEL MINI U BLADE | 1 | |
| UTV617A | DOOR PANEL MINI V BLADE | 1 | |
| UTV618A | DOOR PANEL REVERSE U BLADE | 1 | |
| V2500 | KIT-FAN BLADE ROOT CRACK | 2 | |
| V2500 FAN BLADE L/EDGE | V2500 FAN BLADE L/EDGE INSP KIT | 1 | |
| VA1-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| VA1-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| VAR-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| VAR-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| VEL-100 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| VEL-105 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| VEN-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| VEN-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| VEN-130 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| VEN-135 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| VEZ-100 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| VEZ-105 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| VL3-110 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| VL3-112 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| VL3-115 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| VL3-117 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| VNK-105 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| VNK-107 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| VPL-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| VPL-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| VR7-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| VR7-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| W3B-300-47 | CUSTOM STRIPMASTER BLADE | 1 | |
| W3BGP-300-50 | CUSTOM STRIPMASTER BLADE | 1 | |
| W3G-300-47 | CUSTOM STRIPMASTER BLADE | 1 | |
| W3GGP-300-50 | CUSTOM STRIPMASTER BLADE | 1 | |
| WAC-150 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| WAC-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| WAG-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| WAG-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| WF5-120 | PROPELLOR/SPINNER HUB COVER, 2 blade | 1 | |
| WF5-125 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| WIL-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| WIL-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| WORKAID NO. 5 | ROTOR BLADE ALIGNMENT PIN | 1 | |
| WRST1 | T-Handle Ratchet Screwdrivers (Blade length: 2" (51 mm)) (Overall length: 3-7/8" (98 mm)) (Add to cart: Add To Cart) | 1 | |
| WRST4 | T-Handle Ratchet Screwdrivers (Blade length: 2" (51 mm)) (Overall length: 3-7/8" (98 mm)) (Add to cart: Add To Cart) (Blade length: 3-7/8" (98 mm)) (Overall length: 5-13/16" (148 mm)) (Add to cart: Add To Cart) | 1 | |
| WRST8 | T-Handle Ratchet Screwdrivers (Blade length: 2" (51 mm)) (Overall length: 3-7/8" (98 mm)) (Add to cart: Add To Cart) (Blade length: 3-7/8" (98 mm)) (Overall length: 5-13/16" (148 mm)) (Add to cart: Add To Cart) (Blade length: 7-7/8" (200 mm)) (Overall len | 1 | |
| WST 1025 | HOOK-SHAPED BLADE | 1 | |
| WSTQ400384 | PROPELLER BLADE COMPRESSION TOOL | 1 | |
| WT-151874 | SOCKET, FLAT BLADE | 1 | |
| WT151874 | SOCKET FLAT BLADE (NEO) | 1 | |
| WT9-120 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| WT9-121 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| WT9-125 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| WT9-126 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| WTW-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| WTW-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| X-ACTO | X-ACTO BLADE | 1 | |
| X611 | X-ACTO X611 #11 Classic Fine Point Knife Blade - 100 BladePack | 1 | |
| X616 | X-ACTO BLADE | 1 | |
| XEN-210 | BLADE COVERS (set of 2) | 1 | |
| XEN-215 | BLADE TIE-DOWNS (set of 2) | 1 | |
| XIM-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| XIM-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| XL2-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| XL2-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| XW80045 | ROTOR BLADE FIXTURE | 1 | |
| Y11-150 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| Y11-155 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| Y11-160 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Y11-165 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Y3-100 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Y3-105 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Y52-120 | PROPELLOR/SPINNER COVER, 2 Blades | 1 | |
| Y52-122 | INSULATED PROPELLOR/SPINNER COVER, 2 Blades | 1 | |
| Y52-125 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Y52-127 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Y54-120 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Y54-125 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| YA-DAP-3/16 | BLADE,DOUBLE ACTING,REPLACEMENT,4° POSITIVE RAKE | 1 | |
| YA109C1 | 6PK S/S COLD BLADES-MIXED SZS | 1 | |
| YA109C4 | 6PK C/S COLD BLADES-MIXED SZS | 1 | |
| YA1860A | BLADE, UTILITY W/ DISPENSER | 1 | |
| YA405-1 | BLADE, 23 ANGLE | 2 | |
| YA580A-1 | BLADES 5/PKG | 1 | |
| YA581A | BLADE CUTTER KNIFE | 2 | |
| YA581A-1 | BLADES 10-PA | 1 | |
| Z0109-720 | BLADE END SCREWDRIVER | 1 | |
| Z143-150 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Z143-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Z242-150 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Z242-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Z2K-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| Z2K-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| Z2K-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| Z42-120 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| Z42-125 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| Z601-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| Z601-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| Z601-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| Z601-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| Z701-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| Z701-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| Z701-160 | PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| Z701-165 | INSULATED PROPELLOR/SPINNER COVER, 3 blade | 1 | |
| Z750-140 | PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| Z750-145 | INSULATED PROPELLOR/SPINNER COVER, 2 Blade | 1 | |
| Z750-150 | PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Z750-155 | INSULATED PROPELLOR/SPINNER COVER, 3 Blade | 1 | |
| Z801-150 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| Z801-155 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| ZLN-130 | PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| ZLN-131 | INSULATED PROPELLOR/SPINNER COVER, 2 blade | 1 | |
| lC5906 | TOOL SET, INSPECTION-LOW PRESSURE TURBINE ROTOR BLADES | 1 | |
| lC8052 | TOOL STARTING & STRAIGHTENING RTNR COMPR. RTR BLADE, ST | 1 | |
| AW139BF-3500-1 | TOOL KIT, MAIN ROTOR BLADE, BOLT EXTRACTOR (GJ-51-00) - SUPPORT EQUIPMENT AND TOOLS DATA | 2 | |
| C21003-160 | BRASS FEELER GAUGES, 20PC BLADE THICKNESSES 0.05 -1.0 (0.05 INCREMENTS) MM;GAUGE -FEELER,0.0-0.5INCH,READABLETO1/1000TH STD-1238 INDICATOR -DIAL | 10 | |
| HTB2M | HI TORQUE BLADES | 2 | |
| HTB3M | HI TORQUE BLADES | 3 | |
| HU39483 | TOOL‑FITTING FAN BLADE ASSY | 8 | |
| M/C-40991061 | TITANIUM SAW BLADE | 1 | |
| M/C-40991062 | ALUMINUM SAW BLADE | 1 | |
| 956A8051G02 | PULLER FAN BLADE SPACER | 6 | |
| 831016-1 | FAN BLADE RETAINER | 1 | |
| PWA26319 | GAGE - FEELER FAN BLADE TIP | 1 | |
| PWA29246 | FIXTURE - SUPPORT FAN BLADE REPLACEMENT | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
