| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC38288 | BASE, | 5 | |
| PWC62995 | BASE, | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 91-509 | CRADLE CRADLE-STAND BASE,APU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) AGSE-E169-G02 | ENGINE BASE, CF34-10E (CALIBRATION) | 1 | |
| 056929 | BASE, MACHINED | 1 | |
| 08-2023-0010 | STAND: ENGINE,ROTATING BASE, HAWKER BEECHCRAFT | 5 | |
| 1011925 | MAGNETIC BASE, MODEL E903 | 1 | |
| 10C2090G01 | Base,measure ZG | 1 | |
| 10C2220G01 | Fixture-base，pusher & wrench | 1 | |
| 172-018 | EXTENDED CANOPY COVER, over-top type, down to fuselage base, covers gas caps) | 1 | |
| 172-025 | EXTENDED CANOPY COVER (Over-The-Top Style) (straight back, C-model & prior), (down to fuselage base, covers gas caps) | 1 | |
| 1AJC7 | AIR TOOL OIL,CONVENTIONAL OIL BASE,4 OZ. | 1 | |
| 1F11110 | Base, Assembly | 1 | |
| 1F11177 | Base, Reaction | 1 | |
| 1F11513 | Base, Removal | 1 | |
| 1P16146 | BASE, REMOVE - ROTOR, HPT FIRST STG BLADES | 1 | |
| 1P16158 | BASE, REMOVE - ROTOR, HPT FIRST STG BLADES | 1 | |
| 1R18206 | Base, Settings | 1 | |
| 1R18924 | BASE, CURVIC, MASTER | 1 | |
| 2-21 | BASE, STATIC | 3 | |
| 2024714-1 | BASE, RIVET SET | 1 | |
| 2103172-002-CCC | APPROVAL STAMPED - CMPTR_BASE, WORKSTATION 700W PS CLAB/MLAB Z440-CCC | 1 | |
| 234-3 | BASE,STAND:3 IN. STEEL STAND EXTENSION | 1 | |
| 234AL-10 | BASE,STAND:10 IN. AL STAND EXTENSION | 1 | |
| 234AL-5 | BASE,STAND:5 IN. STEEL STAND EXTENSION | 1 | |
| 2C6662G01 | Cross slide base,grind hpc blade platforms stages 3 thru 16 | 1 | |
| 2C81552P01 | BASE, LPT BLADE RETAINER (BLAD | 1 | |
| 2C81552P02 | Base,tab bend-retainer,lpt blade | 1 | |
| 2C81562G01 | BASE, MEASURE L02 | 1 | |
| 332A91-3202-00 | BASE,MGB | 1 | |
| 332A91312102 | BASE,MRH | 1 | |
| 332A91330102 | BASE,TGB | 1 | |
| 337-117 | REAR ENGINE PLUGS (around spinner base, earlier round type) (set of 2) | 1 | |
| 337-118 | REAR ENGINE PLUGS (around spinner base, later off-round type) (set of 2) | 1 | |
| 350A91-3100-02 | BASE, MRH | 1 | |
| 350A91-3200-00 | BASE, STAND, MAIN GEAR BOX | 1 | |
| 350A91-3300-00 | BASE,TGB | 1 | |
| 350A91-3381-00 | BASE,TRH | 1 | |
| 350A91310002 | BASE,MRH | 1 | |
| 350A91320000 | BASE, MAIN GEAR BOX | 1 | |
| 350A91338000 | BASE,TGB | 1 | |
| 350A91338100 | BASE,TRH | 1 | |
| 365A91-3145-02 | BASE,MRH | 1 | |
| 365A91-3245-04 | BASE,MRH | 1 | |
| 365A91-3340-00 | BASE,TRGB | 1 | |
| 365A91324504 | BASE,MGB | 1 | |
| 365A91334000 | BASE,TRGB | 1 | |
| 463-6-4/X-306/TL-52 | PRIMER, EPOXY (463-6-4 PRIMER BASE, X-306 PRIMER CONVERTER, TL-52 THINNER | 1 | |
| 558-1-13471 | Base, support | 1 | |
| 575133-1 | BASE, O-RING INSTALLATION TOOL | 1 | |
| 604080 | COIL BASE, | 1 | |
| 67548-101 | BASE, PACK HEIGHT FIXTURE | 1 | |
| 7033-10 | BASE, MAGNETIC MITUTOYO 7033B | 1 | |
| 8400-7 | BASE, 3-LEG | 1 | |
| 8400-8 | BASE, 4-LEG | 1 | |
| 8400-91 | BASE, ACRYLIC V-BLOCK, 8400 OPTICAL MIC | 2 | |
| 856A1225 | SUPPORT BASE, B/U HPTR | 1 | |
| 856A1225G01 | Base, Support - HPT Rotor Buildup/Runout Fixture (support base) | 9 | |
| 856A2322G01 | BASE, MOBILE - FAN AND BOOSTER (MOBILE BASE) | 1 | |
| 8C3646G01 | Base,support,dynamometer-IGBX,vertical | 1 | |
| 8C3650G01 | Base,support,dynamometer-IGBX,horizontal | 1 | |
| 8C3663G01 | Base,deinstl-igbx,ball brg,outer race,horizontal | 1 | |
| 91-509 | CRADLE-STAND BASE,APU | 2 | |
| 91/509 | CRADLE-STAND BASE,APU | 2 | |
| 932A217-1 | BASE, SUPPORT | 1 | |
| 9486M43G01 | Base,assembly | 1 | |
| 9486M44G02 | Base,assembly | 1 | |
| 956A3111P08 | Base,plate 2 | 1 | |
| 98A27203500000 | Measuring Base, Flight Control Surface | 15 | |
| A365-102 | ENGINE COVER, extends down to fuselage base, WZ-9G model | 1 | |
| AFNDT-2095 | 5 STEP WEDGE W/ BASE, .016", .020", .040", .050", .080", Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2108 | CUSTOM DEPTH METER BASE, BOTH PARTS PER SPEC. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2108-1 | CUSTOM DEPTH METER BASE, PER FL TECHNICS SPEC.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2108-2 | CUSTOM DEPTH METER BASE, PER FL TECHNICS SPEC.. Includes Test Report and Certificate of Conformance. | 1 | |
| AGE-01196-401 | BASE,ASSY | 1 | |
| AGE-01200-401 | BASE,ASSY | 1 | |
| AGE-02715-001 | BASE, RUBBER | 1 | |
| AGSE-E169-G02 | WIDE BASE, CF34-10E | 8 | |
| AGSEAM2388 | BASE,CFM56 ENGINE TRANSPORTATION AND STORAGE | 1 | |
| AH365-102 | ENGINE COVER, extends down to fuselage base, WZ-9G model | 1 | |
| AM-2228-B1 | BASE, V2500 | 1 | |
| AM-2563-200 | UNIVERSAL BASE, CFM56 | 9 | |
| AM-2563-227 | ENGINE DOLLY, BASE, UNIVERSAL TRANSPORTATION - CFM56 ENGINE | 7 | |
| AM-2701R | TRANSPORT BASE,PW4000 | 1 | |
| AM1928-155FO | BASE, ASSEMBLY TRANSPORT | 1 | |
| AM2563-227 | ENGINE DOLLY, BASE, UNIVERSAL TRANSPORTATION - CFM56 ENGINE | 7 | |
| AM2811 | UNIVERSAL BASE, CFM56 | 2 | |
| B611712 | BASE, MAGNETIC MITUTOYO 7033B | 1 | |
| BST-2912 | BASE, SPINDLE | 1 | |
| CP30011-4 | (BASE, MOBILE, MULTI PURPOSE STAND FOR RB211 ENGINES | 1 | |
| CS-295-AG1020501 | BASE,STAND | 1 | |
| DF071554-07-08 | 8 STEP BASE, ENGINE ACCESS STAND | 1 | |
| DF071554-07-10 | 10 STEP BASE, ENGINE ACCESS STAND | 1 | |
| F72950-158 | BASE, TRANSPORTATION, APU | 17 | |
| FB70000-2 | BASE, TRANSPORT & SH | 4 | |
| G34002-8 | BASE,3/4 ROUND | 1 | |
| G34002-9 | BASE,HALF ROUND | 1 | |
| GS10733 | BASE, BELLOWS INSTALLING | 1 | |
| H-1392-08 | BASE, MOTOR SLIDING | 2 | |
| HCS2036-01-013 | ROUTER BASE, TWO-HANDED 10-20 GRINDERS | 1 | |
| HOLDER, HEX BIT, MAGNETIC, RUBBER BASE, RED | HOLDER, HEX BIT, MAGNETIC, RUBBER BASE, RED | 1 | |
| IAE1F10091 | BASE, REMOVAL | 1 | |
| IAE1F10099 | BASE, ASSY/DISASSY | 1 | |
| IAE1F10100 | BASE, HOLDER LHT Dwg No.(537260044) | 1 | |
| IAE1F10131 | BASE, INSTALL./REMOV. | 1 | |
| IAE1F10135 | BASE, REMOVAL | 1 | |
| IAE1F10162 | BASE, INSTALL/REMOVE | 1 | |
| IAE1F10163 | BASE, INSTALL/REMOVE | 1 | |
| IAE1F10164 | BASE, INSTALL/REMOVE | 1 | |
| IAE1F10165 | BASE, INSTALLATION | 1 | |
| IAE1F10166 | BASE, INSTALL/REMOVE | 1 | |
| IAE1F10168 | BASE, INSTALLATION | 1 | |
| IAE1F10169 | BASE, INSTALL/REMOVE | 1 | |
| IAE1F10170 | BASE,INSTALL REMOVE | 7 | |
| IAE1F10171 | BASE, INSTALLATION | 1 | |
| IAE1F10173 | BASE, INSTALLATION | 1 | |
| IAE1F10177 | BASE, INSTALLATION | 1 | |
| IAE1F10192 | BASE, INSTALLATION | 1 | |
| IAE1F10193 | BASE, INSTALLATION | 1 | |
| IAE1F10194 | BASE, INSTALLATION | 1 | |
| IAE1F10195 | BASE, INSTALLATION | 5 | |
| IAE1F10197 | BASE, INSTALLATION | 1 | |
| IAE1F10198 | BASE, INSTALLATION | 1 | |
| IAE1F10200 | BASE, REMOVE/INSTALL | 5 | |
| IAE1F10201 | BASE, REMOVE/INSTALL | 1 | |
| IAE1F10207 | BASE, REMOVAL | 1 | |
| IAE1F10211 | BASE, REMOVE/INSTALL | 5 | |
| IAE1F10228 | BASE, INSTALLATION | 1 | |
| IAE1F10240 | BASE, INSTALLATION | 1 | |
| IAE1F10256 | BASE, REMOVAL | 5 | |
| IAE1F10308 | Base, (Gear Required to enable manufacture) | 1 | |
| IAE1F10333 | Base, (Gear Required to enable manufacture) | 1 | |
| IAE1M14020 | PLATE BASE, BALANCING | 1 | |
| IAE1P16140 | BASE, SUPPORT | 1 | |
| IAE1P16166 | BASE, REMOVE | 1 | |
| IAE1P16218 | BASE, REMOVE | 1 | |
| IAE1P16389 | BASE, HOLDING | 1 | |
| IND81086 | PLATE-BASE,TEST | 1 | |
| J3-006 | EXTENDED CANOPY COVER, (Over-The-Top Style) Extends to L.E. of Horiz. Stabil., Down to Fuselage Base, out to wing tanks | 1 | |
| J49006-21 | ATTACH BASE, INSTL | 1 | |
| J49006-22 | ATTACH BASE, INSTL | 1 | |
| K4768 | KIT: BASE,REPLACEMENT, AXLE JACK,02-7835-0100 | 2 | |
| K53003-37 | KIT-LADDER-BASE, ACFT GENERAL USE | 5 | |
| KMAGBIT37R | Holder, Hex Bit, Magnetic, Rubber Base, Red | 1 | |
| L133M6204101 | BASE, MAIN GEAR BOX | 1 | |
| LCB-001 | EXTENDED CANOPY COVER, (Over-The-Top Style) Extends to L.E. of Horiz. Stabil., and Down to Fuselage Base, BELLY STRAP TYPE | 1 | |
| LCB-003 | EXTENDED CANOPY COVER, (Over-The-Top Style) Extends down to fuselage base, Belly Strap Type | 1 | |
| LM RT1F-0001-003 | Base, LM Sidewall | 1 | |
| LM RT1F-0003-001 | Base, Rim LM Tool | 1 | |
| LM RT1F-0006-004 | Base, Flange, Left | 1 | |
| LM RT1R-0006-004 | Base, Flange LM | 1 | |
| LM RT1R-0007-002 | Base, Flange LM | 1 | |
| LM V2 RT1F-0001-002 | Base, LM Sidewall | 1 | |
| LST50682 | EXTENSION BASE, 2IN (50MM) | 1 | |
| LST50683 | EXTENSION BASE, 1IN (25MM) | 1 | |
| LST50689 | EXTENSION BASE, 1IN (25MM) | 1 | |
| LST50690 | EXTENSION BASE, 1/2IN (13MM) | 1 | |
| LST68621 | MAGNETIC BASE UNIVERSAL, INDICATOR HOLDER WITH TRIPLE JOINTED ARM AND FINE-ADJUSTMENT, STARRETT 660 SERIES MAGNETIC BASE, SNAP ON P/N: LST68621. | 1 | |
| LTCT4440 | Base, Holding Fixture | 1 | |
| PWA 103636 | BASE, SUPPORT | 1 | |
| PWA 26306 | BASE, INSTALL/REMOVE | 1 | |
| PWA 80211 | BASE, INSTALLATION | 1 | |
| PWA103636 | BASE, SUPPORT | 1 | |
| PWA111115 | BASE, REMOVAL - TEC,BEARING OUTER RACE | 1 | |
| PWA12126 | BASE, DISASSY - FUEL PUMP DR G/SHAFT_264X262X262MM/10.7KG_[PWA12126] | 2 | |
| PWA211004 | BASE, ANTI ROTATION | 1 | |
| PWA211005 | BASE, MEASUREMENT | 1 | |
| PWA211070 | BASE, CALIBRATION | 1 | |
| PWA25022 | TOOL,BASE,CSD SEAL REMOVAL | 2 | |
| PWA26306 | BASE, INSTALL/REMOVE | 1 | |
| PWA26318 | BASE, EXTENSION (USED WITH PWA 26157) | 3 | |
| PWA80137 | BASE,INSTALLATION | 1 | |
| PWA80142 | BASE, INSTALLATION | 1 | |
| PWA80144 | BASE, INSTALLATION | 1 | |
| PWA80149 | BASE, INSTALLATION | 1 | |
| PWA80151 | BASE, INSTALLATION | 1 | |
| PWA80153 | BASE, INSTALLATION | 1 | |
| PWA80165 | BASE, REMOVE/INSTALL | 1 | |
| PWA80168 | BASE, REMOVAL | 1 | |
| PWA80185 | BASE, INSTALLATION | 1 | |
| PWA80189 | BASE, INSTALLATION | 1 | |
| PWA80211 | BASE, INSTALLATION | 1 | |
| PWA80243 | BASE, INSTALLATION | 1 | |
| PWA80271 | BASE, REMOVAL | 1 | |
| PWA80427 | BASE, REMOVAL | 1 | |
| PWA804369 | BASE,INSTALLATION | 1 | |
| PWA80638 | BASE, DISASSEMBLY | 1 | |
| PWA80640 | BASE, DISASSEMBLY | 1 | |
| PWA80646 | BASE, ASSEMBLY | 1 | |
| PWA80699 | BASE, DISASSEMBLY, START | 1 | |
| PWA80840 | BASE, INSTALLATION | 1 | |
| PWA80992 | BASE, STAKING | 1 | |
| PWA80994 | BASE, STAKING | 1 | |
| PWA8185 | BASE, DISASSY - BEARING & IMPELLER_[PWA8185] | 2 | |
| PWA81989 | BASE, ASSEMBLY | 1 | |
| PWA83066 | BASE, REMOVAL/INSTALL | 1 | |
| PWC30274 | BASE, GEARSHAFT (PRE-SB3121) | 6 | |
| PWC30463 | BASE, HOLDING, SLEEVE | 3 | |
| PWC31572 | BASE, NO.4 BEARING HOUSING COVER | 1 | |
| PWC32174 | BASE, IMPELLER | 4 | |
| PWC32179 | BASE, SHAFT HOLDING | 5 | |
| PWC37099 | Base, Seal No. 6 and 7 Bearing Housing | 1 | |
| PWC37433 | Base, Oil Seal | 10 | |
| PWC37434 | BASE, OIL SEAL | 9 | |
| PWC37667 | PWC BASE, CARBON STEEL HOUSING, PROP BRAKE | 9 | |
| PWC37850 | Base, HP Vane Segments, Inner & Outer Ring | 2 | |
| PWC37852 | Base, HP Vane Segments, Inner & Outer Ring | 6 | |
| PWC37869 | BASE, PT ROTOR SPACER | 4 | |
| PWC38079 | Base, Alternator Drive Oil Seal Carrier | 13 | |
| PWC38079B | BASE, ALTERNATOR DRIVE | 1 | |
| PWC38079BASE, ALTERNATOR DRIVE OIL SEAL CARRIER | BASE, ALTERNATOR DRIVE OIL SEAL CARRIER | 1 | |
| PWC38178 | BASE, LAYSHAFT LIP SEAL HOUSING | 11 | |
| PWC38288 | BASE, 2ND STAGE HD DISK ASSY | 5 | |
| PWC50085 | BASE, VANE ASSEMBLY | 4 | |
| PWC50154 | BASE, INTERSTAGE TURBINE SEAL HOUSING | 2 | |
| PWC50403 | BASE, COMPRESSOR | 1 | |
| PWC50607 | BASE, HUB PWC50607 | 4 | |
| PWC50712 | BASE, CARRIER | 3 | |
| PWC51165 | BASE, CARRIER SEAL | 7 | |
| PWC51250 | BASE, POWER TURBINE SHAFT | 1 | |
| PWC51532 | Base, Carbon Seal | 1 | |
| PWC51855 | BASE, CARRIER | 1 | |
| PWC54840 | BASE, CARBON SEAL HOUSING | 1 | |
| PWC54843 | TOOL, BASE, CARBON SEAL HOUSING | 1 | |
| PWC55143 | BASE, BREATHER GEAR | 5 | |
| PWC55501 | BASE,BEARING | 1 | |
| PWC55767 | BASE, ACGEN AND HYD PUM | 4 | |
| PWC55934 | BASE, IMPELLER | 5 | |
| PWC55963 | BASE, LIP SEAL | 5 | |
| PWC57323 | BASE, HOLDING | 1 | |
| PWC57350 | BASE, DC START/GEN | 5 | |
| PWC60866 | BASE, OIL PUMP HOUSING | 1 | |
| PWC64320 | BASE, TURBINE SUPPORT CASE | 1 | |
| PWC64372 | BASE, LIP SEAL CARRIER | 6 | |
| PWC64373 | BASE, MULTI PURPOSE | 7 | |
| PWC69720 | BASE, TSC, SHROUD SEGMENT INSTALLATION | 1 | |
| PWC70043 | BASE, DISK | 1 | |
| PWC70803 | BASE, PRESS/TORQUE | 1 | |
| PWC70864 | HOLDING BASE, STARTER-GENERATOR | 2 | |
| PWC71546 | BASE, DISK | 1 | |
| PWC72139 | HOLDING BASE, CARRIER | 1 | |
| PWC72247 | HOLDING BASE, FIRST STAGE CARRIER | 1 | |
| RBE350A91-3300-00 | BASE,TGB | 3 | |
| RBW6305G03631-3G | Base, Clutch Inner/Outer Bearing Removal | 2 | |
| RRT053187 | Base,support | 1 | |
| SAV-001 | EXTENDED CANOPY COVER, (Over-The-Top Style) Extends to L.E. of Horiz. Stabil., and Down to Fuselage Base, BELLY STRAP TYPE | 1 | |
| SAV-003 | EXTENDED CANOPY COVER, (Over-The-Top Style) Extends down to fuselage base, Belly Strap Type | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
