| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 3052S11 | BACKLASH | 5 | |
| 978.73.20.902 | BACKLASH | 1 | |
| 98A52308542000 | BACKLASH | 2 | |
| C27030-34 | Backlash | 2 | |
| PWC40315 | BACKLASH | 1 | |
| RB T101735 | BACKLASH | 3 | |
| T101509 | BackLash | 1 | |
| T101735 | BackLash | 1 | |
| T101872 | BACKLASH | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 0U190686 | BACKLASH BALLNUT BACKLESS CHECKING TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 0U190863 | TOOL BACKLASH CHECKING TOOL-THS ACTU (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 55771S0000 | TOOL TOOL-BACKLASH CHECKING - SLAT S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9271501-0001 | TOOL, RUDDER BACKLASH CHECK (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CG9273101-0001 | BACKLASH CHECK TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CHA141478 | BACKLASH BACKLASH CHECKING TOOL - FLAP S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) CHA700224 | ADAPTOR ADAPTOR-BACKLASH CHECKING (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LLA537A204 | TOOL TOOL BACKLASH CHECKING - FLAP S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LLA547A108 | TOOL TOOL BACKLASH CHECKING - FLAP S (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) LLA547A194 | TOOL TOOL BACKLASH CHECKING - FLAP S (CALIBRATION) (CALIBRATION) | 1 | |
| 01500-202 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE | 1 | |
| 0U141336 | BACKLASH CHECUING ACTUATOR SCREW BALL NUT | 1 | |
| 0U190686 | BACKLASH CHECKING TOOL 5100 | 8 | |
| 0U190863 | BACKLASH CHECKING TOOL-THS ACTUATOR | 19 | |
| 0U190863-051 | DTI FOR OU190863 BACKLASH CHECKING FIXT | 2 | |
| 0U300963 | RADIAL BACKLASH CONTROL TOOL | 1 | |
| 0U300964 | RADIAL BACKLASH TEST BENCH | 1 | |
| 1044 | DTI HORIZONTAL STAB BACKLASH TOOL | 2 | |
| 10465-1 | MEASUREMENT TOOL - BACKLASH (SERIES 100/200/300) | 4 | |
| 109-3400-42-101 | TOOL SET 90 DEGREE GEAR BOX BACKLASH CHECK | 1 | |
| 1334-500-15 | BACKLASH TOOL | 1 | |
| 170T07156-401 | DEVICE - BACKLASH MEASUREMENT, TOR-QUE LINK | 1 | |
| 196-42450-701-30H1 | DEVICE, BACKLASH MEASUREMENT - PITCH | 1 | |
| 196-42450-701-30H2 | DEVICE,BACKLASH MEASUREMENT-ROLL | 1 | |
| 196-42450-701-30h1 | DEVICE, BACKLASH MEASUREMENT - PITCH | 1 | |
| 196-42450-701-30h2 | DEVICE, BACKLASH MEASUREMENT - ROLL | 1 | |
| 196-42451-701-30H1 | DEVICE, BACKLASH MEASUREMENT - AILERON | 1 | |
| 196-42451-701-30h1 | DEVICE, BACKLASH MEASUREMENT - AILER-ON | 1 | |
| 196-42453-701-30H1 | DEVICE, BACKLASH MEASUREMENT - ELEVATOR | 1 | |
| 196-42453-701-30h1 | DEVICE, BACKLASH MEASUREMENT - ELE-VATOR | 1 | |
| 196-42455-701-30H1 | DEVICE, BACKLASH MEASUREMENT - RUDDER | 1 | |
| 196-42455-701-30h1 | DEVICE, BACKLASH MEASUREMENT - RUD-DER | 1 | |
| 196T08500-251 | SOFTWARE, BACKLASH CALCULATION | 1 | |
| 196T10000-401 | TEST - BACKLASH | 1 | |
| 196T10000-903 | DEVICE, MEASUREMENT TEST - BACKLASH | 1 | |
| 196t08500-251 | SOFTWARE, BACKLASH CALCULATION | 1 | |
| 1C6973G01 | FIXT-BACKLASH&MGT CHK F/B | 1 | |
| 2024475-1 | BACKLASH CHECKING FIXTURE ASSEMBLY | 1 | |
| 2025676-1 | Backlash Fixture | 1 | |
| 204-040-001 17 PAT-1 | BACKLASH TOOL | 1 | |
| 204-040-001-17 | BACKLASH TOOL | 1 | |
| 204-040-001-17 PAT-1 | MAIN TRANSMISSION BACKLASH TOOL | 1 | |
| 204-040-001-17PAT-1 | BACKLASH TOOL | 1 | |
| 204-040-001-19 | BACKLASH TOOL | 1 | |
| 204-040-001-3 | BACKLASH TOOL | 1 | |
| 204-040-001-3 GIF-1 DET. 54 | MAIN TRANSMISSION BACKLASH TOOL | 1 | |
| 204-040-009-13 | BACKLASH TOOL | 1 | |
| 204-040-009-13PAT-1 | BACKLASH TOOLS (HOLDER) | 1 | |
| 205-040-300-1GIF-1 | BACKLASH TOOL | 1 | |
| 205-040-300-1GIF-1, | BACKLASH TOOL | 1 | |
| 212-040-001-003 | BACKLASH TOOL | 1 | |
| 212-040-001-19 | BACKLASH TOOL | 1 | |
| 212-040-001-19 GIF-1 | MAIN TRANSMISSION BACKLASH TOOL | 1 | |
| 212-040-001-19GIF-1: | BACKLASH TOOL | 1 | |
| 212-040-001-19GIF1 | BACKLASH TOOL | 1 | |
| 212-040-001-3 GIF-1 | BACKLASH TOOL | 1 | |
| 212-040-001-3 GIF-1D54 | BACKLASH TOOL | 1 | |
| 212-040-001-3GIF-1D2 | BACKLASH TOOL SET | 1 | |
| 212-040-001-3GIF-1D54, | BACKLASH TOOL | 1 | |
| 212-040-001-3GIF1D3 | BACKLASH TOOL SET | 1 | |
| 212-040-001-3GIF1D4 | BACKLASH CLAMP | 1 | |
| 212-040-300-1 | BACKLASH TOOL | 1 | |
| 2190038G2 | Backlash Gage | 1 | |
| 21C4371G01 | BACKLASH TOOL ASY | 1 | |
| 21C7020G03 | CHECK KIT, BACKLASH | 1 | |
| 21C7076G02 | GAGE , BACKLASH | 1 | |
| 253586 | RING-CENTERING GEAR, BACKLASH CENTERING RING | 1 | |
| 274046-1-1 | BACKLASH CHECKING FIXTURE | 1 | |
| 278114 | TOOL FUEL PUMP BACKLASH | 1 | |
| 23054776 | Gage – Backlash, Internal Gearbox | 1 | |
| 23054781 | Gage – Backlash, Accessory Gearbox | 1 | |
| 278114-1 | MAIN FUEL PUMP PUMP BACKLASH TOOL | 1 | |
| 28-0-4080 | F100 BACKLASH CHECKING | 2 | |
| 287718-1 | DEVICE-WRENCH AND LOCK GEAR BACKLASH CHECKING | 1 | |
| 287912-1 | FIXTURE CHECKING GEAR BACKLASH | 1 | |
| 289175-1 | GAGE GEAR BACKLASH | 1 | |
| 289858-1 | GAGE BACKLASH CHECKING | 1 | |
| 2C81600G01 | FIXTURE, MEASURE BACKLASH BEV | 1 | |
| 2C90020G01 | FIXTURE, BACKLASH, PTO ASSY | 1 | |
| 2C91170G01 | FIXTURE, PATTERN AND BACKLASH CHECK | 1 | |
| 2C91213G01 | FIXTURE-CHECKING SHIM BACKLASH | 1 | |
| 2F11187 | Backlash Check Lever | 1 | |
| 2F11189 | Backlash Check Lever | 1 | |
| 314STD-27-0011 REV. 2 | INSPECTION AND/OR ADJUSTMENT OF THE ELEVATOR CONTROL SYSTEM BACKLASH | 1 | |
| 3403149-1 | TOOLKIT,INSPECTION,WING FLAP JACKSCREW (BACKLASH) | 2 | |
| 376060GSE1-1001 | KIT - CONTROL SURFACE BACKLASH CHECK | 1 | |
| 3791096-1 | FIXTURE BACKLASH CHECKING | 1 | |
| 3791330-1 | BACKLASH-TOOL SET | 1 | |
| 3CF65B80552 | CHECK FIXTURE - STABILIZER JACKSCREW DIFFERENTIAL ASSEMBLY, BACKLASH | 1 | |
| 4002-0028-1 | FIXTURE, ARM ASSEMBLY, STIFFNESS AND BACKLASH | 1 | |
| 407-240-020-101 | BACKLASH BAR (407-240-020-101) | 1 | |
| 412-240-006-101 | BACKLASH TOOL SET | 1 | |
| 412-240-010-100 | BACKLASH TOOL (GEARBOX) | 1 | |
| 412-240-010-101 | BACKLASH TOOL 412-240-010-101 | 1 | |
| 412-240-011-101 | BACKLASH CLAMP SET 412-240-011-101 | 1 | |
| 4220-0013-1 | FIXTURE, MOUNT ASSEMBLY, STIFFNESS, AND BACKLASH | 1 | |
| 42594-1-207 | TOOL-BACKLASH, ELECT BRAKE ACTUATOR | 1 | |
| 427-240-109-101 | BACKLASH SET | 1 | |
| 460006942 | BACKLASH TEST EQUIPMENT | 1 | |
| 460006960 | BACKLASH CHECKING EQUIPMENT | 1 | |
| 513400GSE8-1001 | HSTA SECONDARY LOAD PATH AND AXIAL BACKLASH KIT GSE2730172 | 1 | |
| 550T05656-201 | SOFTWARE,BACKLASH CALCULATION-CON-TROL SURFACE/HS | 1 | |
| 550T05656-251 | SOFTWARE,BACKLASH CALCULATION-CON-TROL SURFACE/HS | 1 | |
| 550T05656-251 | SOFTWARE,BACKLASH CALCULATION-CONTROL SURFACE/HS | 1 | |
| 550T05657-403 | BACKLASH MEASUREMENT ASSY | 1 | |
| 55771S0000 | TOOL-BACKLASH CHECKING - SLAT SCREWJAKS | 1 | |
| 55855S0000 | BACKLASH MEASURING FIXTURE | 1 | |
| 55880S0000 | BACKLASH CHECKING DEVICE | 1 | |
| 55948S0000 | BACKLASH CHECKING TESTING FIXTURE | 1 | |
| 55991S0000 | BACKLASH CHECKING FIXTURE | 1 | |
| 56213S0000 | BACKLASH FIXTURE | 1 | |
| 56586S0000 | BACKLASH CHECKING TOOL | 1 | |
| 56945A0000-01 | BACKLASH CHECKING FIXTURE | 1 | |
| 57098A0000-01 | FIXTURE TO BACKLASH | 1 | |
| 57099A0000-01 | FIXTURE TO BACKLASH | 1 | |
| 60P2700001N001COF | BACKLASH MEASUREMENT FIXTURE | 1 | |
| 6797590 | FIXTURE - CHECKING, EXTENSION SHAFT AND SIDE GEAR BACKLASH | 2 | |
| 7000-540 | AXIAL BACKLASH TOOL CHECK | 1 | |
| 7000-541 | AXIAL BACKLASH TOOL CHECK | 1 | |
| 7011SN | STAND MAGNETIC BACKLASH MEASUR | 4 | |
| 72P2700001N001COF | CONTROL SURFACE BACKLASH MEASUREMENT TOOL | 1 | |
| 830006-401-00736 | MAIN TRANSMISSION BACKLASH & RUNOUT INSP. FIXTURES | 1 | |
| 834012-1 | BACKLASH ADAPTER | 1 | |
| 835603-1 | Backlash Tool | 1 | |
| 835673-1 | BACKLASH CHECK FIXTURE ADAPTER | 1 | |
| 83740071 | BACKLASH CHECKING JIG | 1 | |
| 852D102-4 | FLAP ACTUATOR BACKLASH TOOL | 6 | |
| 852D102/05 | HOLDING FIXTURE BACKLASH | 1 | |
| 852D102/4 | Backlash Measuring Tool | 6 | |
| 856A2746G01 | FIXTURE, CHECKING, BACKLASH | 4 | |
| 856A2748 | FIXTURE, CHECK BACKLASH | 1 | |
| 856A2748G01 | Fixture Check Backlash | 1 | |
| 856A2748G03 | CHECKING FIXTURE - BACKLASH | 4 | |
| 856A3418G01 | Trio Bevel Backlash Tool | 1 | |
| 856A3546 | Fixture, Checking Backlash - TGB Bevel Gear | 1 | |
| 856A3546G01 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G02 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G03 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G04 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G05 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 856A3546G06 | Fixture Check Backlash Duo Bevel Gear TGB | 4 | |
| 856A3546G07 | FIXTURE, CHECKING. BACKLASH - TGB BEVEL GEAR DUO | 1 | |
| 9221 | RAT BACKLASH FIXTURE TOOL | 1 | |
| 872160182 | FLAP ACTUATOR BACKLASH TOOL | 1 | |
| 872760182 | KIT BACKLASH TOOL | 1 | |
| 9441M33 | FIXTURE, BACKLASH CHECKING | 1 | |
| 9441M33 REV B | FIXTURE, BACKLASH CHECKING | 1 | |
| 9441M34 | FIXTURE-BACKLASH CHK. RADIAL BEVEL GEAR | 1 | |
| 9441M34 REV E | FIXTURE-BACKLASH CHK. RADIAL BEVEL GEAR | 1 | |
| 9461M30G02 | Fixture Backlash Check | 1 | |
| 9480M04 | FIXTURE, BACKLASH - TRANSFER GEARBOX | 1 | |
| 9480M58G01 | BACKLASH TRANFER GEARBOX | 1 | |
| 9480M58G02 | FIXTURE BACKLASH | 1 | |
| 9480M78G01 | FIXTURE, BACKLASH – HORIZONTAL & RADIAL BEVEL GEARS, INLET GEARBOX | 1 | |
| 9480M78G02 | FIXTURE BACKLASH | 1 | |
| 956A3549 | PATTERN BACKLASH FIXTURE | 1 | |
| 956A6058 | FIXTURE - BACKLASH CHECK - ABRADABLE SEAL | 1 | |
| 956A6236 | CHECKING SUPPORT - BACKLASH | 1 | |
| 956A6237 | RIGGING FIXTURE - BACKLASH | 1 | |
| 956A6238 | FIXTURE- BACKLASH | 1 | |
| 956A6984 | SUPPORT - BACKLASH - BEVEL GEAR - TGB | 1 | |
| 956A8476 | FIXTURE - CHECK - BACKLASH | 1 | |
| 956A8927 | FIXTURE - BACKLASH - BEVEL GEAR - TGB | 1 | |
| 956A8928 | SUPPORT - BACKLASH - BEVEL GEAR - TGB | 1 | |
| 956A8970 | SUPPORT - BACKLASH - BEVEL GEAR - TGB | 1 | |
| 956A8979 | FIXTURE - BACKLASH - BEVEL GEAR -AGB | 1 | |
| 96T10000-903 | DEVICE, MEASUREMENT TEST - BACKLASH | 1 | |
| 978.73.20.901 | MEASURING TOOL, BACKLASH | 1 | |
| 978.73.20.902 | MEASURING TOOL, BACKLASH | 1 | |
| 98A32301010000 | BACKLASH CHECKING TOOL - FLAP SCREWJACK 2 | 9 | |
| 98A32301011000 | BACKLASH CHECKING TOOL - FLAP SCREWJACKS 1,3 AND 4 | 5 | |
| 98A52308542000 | BACKLASH, DOOR LOCKING | 2 | |
| 98D27408621000 | DEVICE - MEASURE, THSA BACKLASH | 1 | |
| 9C1901 | TOOL SET/ BACKLASH SHIM | 1 | |
| 9C1925 | DETERMINATION/BACKLASH SPUR GEAR | 1 | |
| A27048-1 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-2 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-3 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27048-40 | FIXTURE - CHECK, GEARBOX BACKLASH | 1 | |
| A27049-1 | CHECK FIXTURE - LEADING EDGE SLAT ANGLE GEARBOX BACKLASH | 1 | |
| A27070-24 | TEST FIXTURE BACKLASH (2IT) | 1 | |
| A32061-1 | BACKLASH CHECK EQUIPMENT - NOSE LANDING GEAR (NLG) STEERING GEARBOX | 1 | |
| A52023-1 | BACKLASH CHECK EQUIPMENT - MANUAL DRIVE, LARGE CARGO DOOR | 1 | |
| A668180 | BACKLASH CHECKING TOOL | 1 | |
| A687959 | BACKLASH CHECKING TOOL | 1 | |
| A698752 | ROTATIONAL BACKLASH MEASUREMENT TOOL | 1 | |
| AB27001-G94 | BACKLASH CHECKING TOOL THS ACTUATOR | 1 | |
| AE27001 | ADAPTER BACKLASH GSE195, EMB | 1 | |
| AE8407 | CLAMP BACKLASH | 1 | |
| AE8597 | BAND, ANTI BACKLASH | 1 | |
| AGE 00539-401 | KIT - BACKLASH MEA-SUREMENT | 6 | |
| AGE 00545-401 | KIT BACKLASH .., HORIZONTAL STABILIZER | 7 | |
| AGE 00895-401 | GAUGE SETTING RUDDER NEUTRAL POSITION CONTROL SURFACE BACKLASH CALCULATION SOFTWARE | 10 | |
| AGE 01500-203 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE | 1 | |
| AGE 01616 401 | BACKLASH MEASUREMENT. ELEVATOR/AILERON | 1 | |
| AGE 01616 403 | BACKLASH MEASUREMENT. ELEVATOR/AILERON | 1 | |
| AGE 01617 403 | BACKLASH MEASUREMENT. RUDDER | 1 | |
| AGE 11017 | FLAP ACTUATOR BACKLASH TOOL (SUNDSTRAND) | 6 | |
| AGE- 00343- 401 | KIT - BACKLASH MEASUREMENT, RUDDER | 9 | |
| AGE-00248-409 | PIN ELEVATOR SURFACE (KIT BACKLASH) | 2 | |
| AGE-00248-425 | QUADRANT REAR RUDDER (KIT BACKLASH) | 2 | |
| AGE-00313-401 | ADAPTER BACKLASH | 4 | |
| AGE-00313-403 | ADAPTER BACKLASH | 5 | |
| AGE-00343-401 | KIT - BACKLASH MEA-SUREMENT, RUDDER | 9 | |
| AGE-00343-402 | KIT - BACKLASH MEASUREMENT, RUDDER | 1 | |
| AGE-00343-801 | Kit. Backlash Measuring Rudder | 1 | |
| AGE-00539-401 | KIT - BACKLASH MEA-SUREMENT | 6 | |
| AGE-00545-401 | KIT - BACKLASH MEA-SURE, HORIZONTAL STA-BILIZER | 7 | |
| AGE-00574-001 | HORIZONTAL BACKLASH PLATE | 1 | |
| AGE-01410 -401 | BACKLASH MEASUREMENT. HORIZONTAL STABILIZER | 8 | |
| AGE-01410-401 | SET - BACKLASH MEASUREMENT, RUDDER | 8 | |
| AGE-01410-401 | BACKLASH MEASUREMENT RUDDER , | 8 | |
| AGE-0146-401 | HORIZONTAL STAB BACKLASH KIT | 1 | |
| AGE-01500-001 | BACKLASH CALCULATION SOFTWARE | 1 | |
| AGE-01500-202 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE | 1 | |
| AGE-01500-203 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE | 1 | |
| AGE-016 | KIT - BACKLASH MEASUREMENT, HORIZONTAL STABILIZER | 1 | |
| AGE-01616-40 | KIT - BACKLASH MEASUREMENT, HORIZONTAL STABILIZER | 1 | |
| AGE-01616-401 | KIT - BACKLASH MEASUREMENT, HORIZONTAL STABILIZER | 1 | |
| AGE-01616-401 | BACKLASH MEASUREMENT, HOR.STAB | 1 | |
| AGE-01616-403 | KIT - BACKLASH MEASUREMENT, HORIZONTAL STABILIZER | 1 | |
| AGE-01616-403; | SET - BACKLASH MEASUREMENT, HORIZONTAL STABILIZER | 1 | |
| AGE-01617 | KIT - BACKLASH MEAS, HORIZ STAB ACTR | 1 | |
| AGE-01617 401 | BACKLASH MEASUREMENT. RUDDER | 2 | |
| AGE-01617-401 | KIT - BACKLASH MEAS, HORIZ STAB ACTR | 2 | |
| AGE-01617-403 | KIT - BACKLASH MEAS, HORIZ STAB ACTR | 1 | |
| AGE-01623-401 | SET - BACKLASH MEASUREMENT, ELEVATOR / AILERON | 1 | |
| AGE-01623-401 / AGE-04267-401 | SET, BACKLASH MEASUREMENT, ELEVATOR / AILERON | 1 | |
| AGE-01629 401 | DEVICE-BACKLASH MEASUREMENT | 9 | |
| AGE-01629-401 | DEVICE - BACKLASH MEASUREMENT | 9 | |
| AGE-01629-403 | FLAP DEVICE, BACKLASH MEASUREMENT | 3 | |
| AGE-03897-401 | TRIPOD - BACKLASH MEAS, AIL/ELEV | 1 | |
| AGE-04134 401 | BACKLASH MEASUREMENT. HORIZ STAB | 9 | |
| AGE-04134-401 | SET-BACKLASH MEASUREMENT, HORIZ STAB | 9 | |
| AGE-04138-401 | SET- BACKLASH MEASUREMENT, HORIZ STAB | 1 | |
| AGE-04146 401 | BACKLASH MEASUREMENT. HORIZ STAB | 7 | |
| AGE-04146-401 | SET-BACKLASH MEAS,HORIZ STAB ACTR | 7 | |
| AGE-04267 401. | BACKLASH MEASUREMENT. HORIZONTAL STAB ACTUATOR | 6 | |
| AGE-04267-401 | SET - BACKLASH MEASUREMENT, ELEVATOR / AILERON | 6 | |
| AGE-04267-401 | BACKLASH ELEVATOR AILERON SET, | 6 | |
| AGE-04691-403 | BACKLASH CALCULATION SOFTWARE | 1 | |
| AGE-04718-401 | SET - MEASUREMENT, BACKLASH | 4 | |
| AGE-04760-201 | SOFTWARE, BACKLASH | 1 | |
| AGE-04760-202 | SOFTWARE, BACKLASH | 1 | |
| AGE-04760-203 | SOFTWARE, BACKLASH | 1 | |
| AGE-04760-204 | SOFTWARE, BACKLASH | 1 | |
| AGE-04830-201 | SOFTWARE - BACKLASH CALCULATION, CON-TROL SURFACE | 1 | |
| AGE-04830-202 | SOFTWARE - BACKLASH CALCULATION, CON-TROL SURFACE | 1 | |
| AGE-05315-401 | KIT - BACKLASH MEAS, HORIZ STABILIZER | 1 | |
| AGE-05315-401-REVB | ADAPTERS - MEAS HORIZ TAIL BACKLASH | 1 | |
| AGE-05315-403 | KIT-BACKLASH MEAS, HORIZ STABILIZER | 1 | |
| AGE-05342-201 | SOFTWARE - BACKLASH CALCULATION, CON-TROL SURFACE | 1 | |
| AGE-05342-204 | SOFTWARE - BACKLASH CALCULATION, CON-TROL SURFACE | 1 | |
| AGE-11017 | BACKLASH MEASURMENT TOOL | 6 | |
| AGE00313-401 | BACKLASH DYNO SUPPORT | 4 | |
| AGE00313-403 | BACKLASH DYNO SUPPORT | 5 | |
| AGE00343-401 | KIT - BACKLASH MEA-SUREMENT, RUDDER | 9 | |
| AGE00539-401 | KIT - BACKLASH MEASUREMENT | 6 | |
| AGE00545-401 | KIT - BACKLASH MEA-SURE, HORIZONTAL STA-BILIZER | 7 | |
| AGE01410-401 | KIT-BACKLASH MEASUREMENT, RUDDER | 8 | |
| AGE01616-401 | KIT, BACKLASH MEASUREMENT - THS | 1 | |
| AGE01623-401 | KIT-BACKLASH MEASUREMENT ELEVATOR/AILERON EMB195 | 1 | |
| AGE01629-401 | DEVICE, BACKLASH MEASUREMENT | 9 | |
| AGE04134-401 | SET-BACKLASH MEASUREMENT, HORIZ STAB | 9 | |
| AGE04146-401 | SET-BACKLASH MEAS,HORIZ STAB ACTR | 7 | |
| AGE04267-401 | KIT-BACKLASH MEASUREMENT,ELEV/AIL | 6 | |
| AGE11017 | BACKLASH MEASURMENT TOOL | 6 | |
| AGE13868 | BACKLASH FIXTURE | 1 | |
| AGEâ?00343â?401 | RUDDER BACKLASH MEASURING KIT | 9 | |
| AM-1986 | AILERON BACKLASH MEASUREMENT KIT | 9 | |
| AST27A023 | BACKLASH ADAPTOR | 1 | |
| AT-092774 | KIT - BACKLASH MEASUREMENT | 6 | |
| AT6516 | BACKLASH SMOOTHNESS FIXTURE | 1 | |
| B27034 | CHECKING EQPT-JACKSCREW BACKLASH,HORIZONTAL STABILIZER | 1 | |
| B27034-1 | CHECKING EQUIPMENT - JACKSCREW BACKLASH, HORIZONTAL STABILIZER | 11 | |
| B27034-6 | Backlash Load Tool | 6 | |
| B52010 | FIXTURE -0 BACKLASH, NO.1/2 DOOR MANUAL DRIVE | 1 | |
| B52010-1 | FIXTURE - BACKLASH, NUMBER 1 & 2 DOOR MANUAL DRIVE GEARBOX ASSEMBLY | 1 | |
| C 27030-34 | FLAP SCREW BACKLASH | 2 | |
| C27001-51 | EQUIPMENT-TEST,FLAP SCREW BACKLASH | 15 | |
| C27030 | FLAP BACKLASH TOOL | 2 | |
| C27030-107 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 3 | |
| C27030-1077 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 1 | |
| C27030-108 | Test equipment-flap screw backlash | 2 | |
| C27030-109 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 4 | |
| C27030-2 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 7 | |
| C27030-3 | FLAP SCREW BACKLASH | 10 | |
| C27030-33 | Test Equipment - Flap Screw Backlash | 18 | |
| C27030-34 | BACKLASH TOOL | 2 | |
| C27030-34-F | BACKLASH TOOL | 1 | |
| C27030-49 | Test Eqpt-Flap Screw Backlash | 8 | |
| C27030-49 V.94 | Test equipment, flap screw backlash | 1 | |
| C27030-62 | BACKLASH TOOL | 1 | |
| C27030-62-F | BACKLASH TOOL | 1 | |
| C27030-94 | Test Equipment - Flap Screw Backlash | 17 | |
| C27030-94-REVG | FLAP SCREW BACKLASH TEST EQUIP | 1 | |
| C27030-94 | EQUIPMENT - TEST FLAP SCREW BACKLASH | 17 | |
| C27030-95 | Backlash tool assy | 1 | |
| C27065-1 | Check Equipment - Jackscrew Backlash, Horizontal Stabilizer | 5 | |
| C27065-20 | Check Equipment - Jackscrew Backlash, Horizontal Stabilizer | 9 | |
| C27088-1 | Test Fixture - Hypoid Gear Backlash | 1 | |
| C28008-1 | CHECK EQUIPMENT - JACKSCREW BACKLASH HORIZONTAL STABILIZER | 12 | |
| C52003-1 | TEST EQUIPMENT - BACKLASH, AFT AIRSTAIRS GEARBOX | 1 | |
| CF65B82986 | CHECK FIXTURE - BACKLASH CF65B82986 GEARBOX ASSEMBLY, INBOARD LEADING EDGE FLAP DRIVE | 1 | |
| CG9000026-0001 | TOOL HSTAB BACKLASH | 1 | |
| CG9271001-0001 | AILERON BACKLASH LOAD PAD KIT | 1 | |
| CG9271501-0001 | TOOL AILERON BACKLASH ARM | 1 | |
| CG9271501-0003 | TOOL AILERON BACKLASH ARM | 1 | |
| CG9272001-0001 | HOLDER DTI RUDDER BACKLASH | 1 | |
| CG9273001-0001 | KIT PAD LOAD BACKLASH | 1 | |
| CG9273101-0001 | TOOL ELEVATOR BACKLASH BAR | 1 | |
| CG9273101-0003 | ELEVATOR BACKLASH TOOL | 1 | |
| CH1056-084 | BACKLASH CHECKING EQUIPMENT | 1 | |
| CH1057-064-1 | BACKLASH CHECKING EQUIPMENT | 1 | |
| CH712-238 | BACKLASH CHECKING EQUIPMENT | 1 | |
| CHA1001-031 | BACKLASH CHECKING ADAPTER | 1 | |
| CHA1001-032 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA1001-048 | BACKLASH CHECKING FIXTURE | 1 | |
| CHA1001-053 | BACKLASH CHECKING FIXTURE | 1 | |
| CHA1056-084-1 | BACKLASH CHECKING EQUIPMENT | 1 | |
| CHA1056-084-2 | BACKLASH CHECKING EQUIPMENT | 1 | |
| CHA1056-209 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA1057-064 | BACKLASH CHECKING EQUIPMENT | 1 | |
| CHA1057-181 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA1159-027 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA141377 | TOOL: BACKLASH CHECKING 5100 | 4 | |
| CHA141478 | BACKLASH CHECKING TOOL - FLAP SCREWJACKS 1 THRU 6 | 4 | |
| CHA1542-0204 | Backlash Checking | 1 | |
| CHA1542-0204PM | BACKLASH CHECKING | 1 | |
| CHA700-079 | BACKLASH CHECKING EQUIPMENT | 1 | |
| CHA700-224 | ADAPTER BACKLASH CHECKING | 6 | |
| CHA700-228-1 | BACKLASH CHECKING TOOL | 1 | |
| CHA700-228-2 | BACKLASH CHECKING TOOL | 1 | |
| CHA700-379 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA700224 | ADAPTOR ADAPTOR-BACKLASH CHECKING | 6 | |
| CHA701-040 | BACKLASH CHECKING ASSEMBLY | 1 | |
| CHA701-047 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA702-052 | BACKLASH CHECKING ADAPTER | 1 | |
| CHA704-559 | BACKLASH CHECKING TOOL | 1 | |
| CHA704-599 | BACKLASH CHECKING FIXTURE | 1 | |
| CHA707-080 | BACKLASH CHECKING ADAPTER | 1 | |
| CHA707-099 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA709-134 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA710-082 | EQUIPMENT-BACKLASH CHECKING | 1 | |
| CHA711-174 | BACKLASH CHECKING ADAPTER | 1 | |
| CHA712-176-2 | BACKLASH CHECKING EQUIPMENT | 1 | |
| CHA712-176-3 | BACKLASH CHECKING EQUIPMENT | 1 | |
| CHA712-23B | BACKLASH CHECKING EQUIPMENT | 1 | |
| CHA719-235 | BACKLASH CHECKING ADAPTER | 1 | |
| CHA719-249 | BACKLASH CHECKING ADAPTOR | 1 | |
| CHA720-050 | BACKLASH CHECKING EQUIPMENT | 1 | |
| CHA723-1084 | BACKLASH CHECKING FIXT | 1 | |
| CHA723-548 | BACKLASH CHECKING TOOL | 1 | |
| CHA758-057-3 | GEAR BACKLASH CHECKING | 1 | |
| DMG-500 | FLIGHT CONTROL BACKLASH GAUGE (AMETEK) | 6 | |
| E56789 | BACKLASH FIXTURE | 1 | |
| E73385-001 | BACKLASH FIXTURE | 1 | |
| ECODE914578 | BACKLASH SIT TEST STATION | 1 | |
| EMB 120 BACKLASH TOOLS | EMB120 BACKLASH TOOLS AND CD ISSUE KIT | 1 | |
| F2MA927522 | SET OF BACKLASH MEASURING FIXTURES | 1 | |
| F2MA927522100 | MEASURING FIXTURE FOR FLAP INTERMEDIATE TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F2MA927522200 | MEASURING FIXTURE FOR FLAP DUAL TRANSFER GEARBOX BACKLASH AND TORQUE | 1 | |
| F2MA927522300 | MEASURING FIXTURE FOR FLAP POWER DRIVE UNIT BACKLASH | 1 | |
| F2MA927522400 | MEASURING FIXTURE FOR FLAP ACTUATOR BACKLASH | 1 | |
| F2MA927522600 | GAUGE TO CHECK GEAR BACKLASH | 1 | |
| F2MA927522600. | GAUGE TO CHECK GEAR BACKLASH | 1 | |
| FAT-Y472 | TRIPOD, BACKLASH TEST - AILERON/ELEVA-TOR/ROLL | 1 | |
| FAT-Y482 | DEVICE, BACKLASH MEASUREMENT - RUD-DER | 1 | |
| FAT-Y483 | DEVICE, BACKLASH MEASUREMENT - ROLL | 1 | |
| FAT-Y484 | DEVICE, BACKLASH MEASUREMENT - PITCH | 1 | |
| FAT-Y485 | DEVICE, BACKLASH MEASUREMENT - ELE-VATOR | 1 | |
| FAT-Y486 | DEVICE, BACKLASH MEASUREMENT - AILER-ON | 1 | |
| FAT-Y487 | CLIP, BACKLASH MEAS-UREMENT - AILERON/ELEVATOR/RUDDER | 1 | |
| FY5-06950L96-01 | BACKLASH CHECKING TOOL | 1 | |
| G1002721006-001 | FIXTURE, RUDDER, BACKLASH | 3 | |
| G27022 | TEST EQUIPMENT -0 BACKLASH, L.E. FLAP ROTARY | 1 | |
| G27022-14 | TEST EQUIPMENT - BACKLASH, LEADING EDGE FLAP ROTARY ACTUATOR | 1 | |
| G27028-1 | MEASURING EQUIPMENT - VARIABLE CAMBER FLAP ACTUATOR BACKLASH | 2 | |
| G600-270042-1 | Kit - Actuator Outboard Flap Backlash Measurement | 1 | |
| G600−270042−1 | Kit − Actuator Outboard Flap Backlash Measurement | 1 | |
| G601R270005-1 | PLATE - AILERON/ELEVATOR BACKLASH CHECK | 6 | |
| G601R270005−1 | Plate − Aileron/Elevator Backlash Checks | 6 | |
| G601R760002-79 | CLAMP, BACKLASH ASSEMBLY | 1 | |
| G700-270005-1 | Kit - Control Surface Backlash Check | 3 | |
| G700???270005???1 | KIT ??? CONTROL SURFACE BACKLASH CHECK | 3 | |
| G700−270005−1 | KIT − CONTROL SURFACE BACKLASH CHECK | 3 | |
| G71024-1 | ADAPTER EQUIPMENT - FAN THRUST REVERSER ACTUATOR BACKLASH TEST, JT9D ENGINE | 1 | |
| GE-01617-401 | KIT - BACKLASH MEAS, HORIZ STAB ACTR | 1 | |
| GS10596 | ADAPTER BACKLASH | 1 | |
| GSB1000007 | MEASUREMENT TOOL - BACKLASH SERIES 100/200/300 | 1 | |
| GSE 060 | AILERON BACKLASH MEASUREMENT KIT | 1 | |
| GSE 062 | HORIZONTAL-STABILIZER MEASUREMENT BACKLASH KIT | 1 | |
| GSE 069 | KIT, RUDDER BACKLASH MEASUREMENT | 1 | |
| GSE 27X-00-05 | CONTROL SURFACE BACKLASH KIT | 1 | |
| GSE 301 | DEVICE, MEASUREMENT TEST - BACKLASH | 1 | |
| GSE 304 | TRIPOD, BACKLASH TEST - AILERON/ELEVATOR/ROLL | 1 | |
| GSE 309 | DEVICE, BACKLASH MEASUREMENT - AILERON | 1 | |
| GSE 310 | CLIP, BACKLASH MEASUREMENT - AILERON/ELEVATOR/RUDDER | 1 | |
| GSE 378 | CONTROL SURFACE BACKLASH CALCULATION SOFTWARE. | 1 | |
| GSE060 | KIT - BACKLASH MEASUREMENT | 1 | |
| GSE062 | HORIZ STAB BACKLASH (GSE062) | 1 | |
| GSE409 | SET-BACKLASH MEASUREMENT, HORIZ STAB | 1 | |
| HC130H0179-000 | Flap ScrewJack Backlash Check Equipment | 3 | |
| IAE1J12385 | FIXTURE, BACKLASH | 1 | |
| IAE2F10132 | FIXTURE, BACKLASH | 1 | |
| IAE2F10139 | FIXTURE, BACKLASH | 1 | |
| J27059-38 | CHECK FIXTURE EQUIPMENT - BACKLASH, LE SLAT ANGLE GEARBOXES | 1 | |
| J27067-109 | BACKLASH EQUIP 1 | 1 | |
| J27067-110 | BACKLASH EQUIP 2 | 1 | |
| J27067-111 | BACKLASH EQUIP 3 | 1 | |
| J27067-112 | BACKLASH EQUIP 4 | 1 | |
| J27067-113 | BACKLASH EQUIP 5 | 1 | |
| J27069-1 | BACKLASH CHECK EQUIPMENT - OFFSET GEARBOX, LEADING EDGE SLAT ACTUATION | 1 | |
| J32058-1 | CHECK EQUIPMENT - BACKLASH, NOSE LANDING GEAR STEERING GEARBOX | 2 | |
| J52023-1 | BACKLASH CHECK | 1 | |
| J52023-39 | BACKLASH CHECK EQUIPMENT - LARGE CARGO DOOR, MANUAL DRIVE GEARBOX | 1 | |
| J52028-1 | BACKLASH FIXTURE EQUIPMENT - MANUAL DRIVE GEARBOX, LATCH PDU, LARGE CARGO DOOR | 1 | |
| J71002-43 | ANTI-BACKLASH RATCHET | 1 | |
| J71002-60 | ANTI-BACKLASH RATCHET | 4 | |
| J71007-83 | Anti - Backlash Ratchet Assembly | 1 | |
| K52019 | BACKLASH FIXTURE - LARGE CARGO DOOR MANUAL GEARBOX | 1 | |
| K55002-46 | EQUIP BACKLASH | 6 | |
| LCTC2099 | BACKLASH FLAG - ACC DR CARRIER | 1 | |
| LLA517A020 | BACKLASH CHECKING EQUIP | 1 | |
| LLA533A016 | BACKLASH CHECKING ADAPT | 1 | |
| LLA537A204 | TOOL BACKLASH CHECKING - FLAP SCREWJACK 1, 3 AND 4 | 3 | |
| LLA547A108 | TOOL BACKLASH CHECKING - FLAP SCREWJACK 2 | 2 | |
| LLA547A155 | BACKLASH CHECKING ADAPTOR | 1 | |
| LLA547A194 | CHECK TOOL BACKLASH | 1 | |
| LLA788A004 | BACKLASH CHECKING ADAPTOR | 1 | |
| LLA791A001 | BACKLASH AND DEAD WEIGHT ASSEMBLY | 1 | |
| LLA795A034 | BACKLASH AND RUNNING IN FIXTURE | 1 | |
| LLA797A036 | GEAR BACKLASH ADAPTOR | 1 | |
| LLA800A050 | BACKLASH EQUIPMENT | 1 | |
| LLA833A084 | BACKLASH CHECKING | 1 | |
| LLA921A001 | BACKLASH CHECKING TOOL | 1 | |
| LTCT1229 | GAGE, BACKLASH | 1 | |
| LTCT1260 | HOLD ACCESSORY DRIVE GEAR, BACKLASH | 1 | |
| LTCT14611-01 | Fixture, Holding, Bevel Gear and Backlash Gage | 1 | |
| LTCT2099 | GAGE, BACKLASH | 1 | |
| LTCT3468 | GAGE BACKLASH | 1 | |
| LTCT4564 | FLAG BACKLASH GEAR | 1 | |
| LTCT4904 | BACKLASH HOLDING FIXTURE | 1 | |
| M2393 | RUDDER CONTROL SURFACE BACKLASH MEASUREMENT TOOL | 1 | |
| M2508 | ELEVATOR CONTROL SURFACE BACKLASH MEASUREMENT TOOL | 1 | |
| MIT65B98342 | PROTRACTOR - FAN THRUST REVERSER ACTUATOR BACKLASH TEST, JT9D ENGINE | 1 | |
| OB.4586.12 | FLAP SCREW BACKLASH | 1 | |
| OF27214 | BACKLASH TEST FIXTURE | 1 | |
| OU141336 | BACKLASH CHECUING ACTUATOR SCREW BALL NUT | 1 | |
| OU190686 | BACKLASH BALLNUT BACKLESS CHECKING TOOL | 8 | |
| OU190686-002 | BACKLASH TOOL | 1 | |
| OU190686-008 | BACKLASH TOOL | 1 | |
| OU190863 | BACKLASH TOOL | 19 | |
| OU191191 | BACKLASH CHECKING TOOL | 20 | |
| PH1407211000-000 | DEVICE, TEST - BACKLASH | 1 | |
| PH1407211000-000D | DEVICE, TEST - BACKLASH | 1 | |
| PWA 45296 | �TIL BACKLASH | 1 | |
| PWA 45297 | �TIL BACKLASH | 2 | |
| PWA25268 | LOADER - AGB BACKLASH CHECK_[PWA25268] | 2 | |
| PWA25269 | HOLDER - AGB BACKLASH CHECK_[PWA25269] | 2 | |
| PWA25270 | ADAPTER - AGB BACKLASH CHECK_[PWA25270] | 2 | |
| PWA25979 | GAGE - AGB BACKLASH CHECK_[PWA25979] | 2 | |
| PWA45296 | ÚTIL BACKLASH | 1 | |
| PWA45297 | ÚTIL BACKLASH | 2 | |
| PWA85263 | BACKLASH ANGLE GEAR BOX HORIZONTAL | 1 | |
| PWA85265 | BACKLASH ANGLE GEAR BOX VERTICAL | 1 | |
| PWC 30078 | INDICATOR, GEAR BACKLASH | 3 | |
| PWC 34046 | BACKLASH INDICATOR | 3 | |
| PWC34046 | Backlash gauge | 3 | |
| PWC34743 | INDICATOR, GEAR BACKLASH | 1 | |
| PWC34744 | backlash indicator | 3 | |
| PWC34746 | Backlash gauge | 2 | |
| PWC37052 | Backlash adapter | 1 | |
| PWC37060 | backlash gauge | 1 | |
| PWC46548 | BACKLASH MEASURING TOOL | 1 | |
| PWC54386 | GAUGE-BACKLASH CASE | 1 | |
| PWC54386 | Backlash Gauge | 1 | |
| PWC54732 | BACKLASH GAUGE | 1 | |
| PWC55835 | GAUGE-BACKLASH | 1 | |
| PWC55918 | BACKLASH GAUGE | 1 | |
| PWC56166 | Backlash Gauge | 1 | |
| PWC56512 | BACKLASH GAUGE | 1 | |
| PWC56515 | BACKLASH GAUGE | 9 | |
| PWC58243 | Backlash gauge | 1 | |
| PWC60058 | BACKLASH FIXTURE | 1 | |
| PWC60246 | LEVER-BACKLASH | 1 | |
| PWC61056 | FIXTURE-BACKLASH | 1 | |
| PWC61058 | FIXTURE-BACKLASH | 1 | |
| PWC61255-100 | Backlash kit | 1 | |
| PWC64116 | Backlash Indicator | 1 | |
| PWC70026 | Backlash gauge | 1 | |
| PWC70027 | Backlash gauge | 1 | |
| PWC70069 | Backlash gauge | 1 | |
| PWC72186 | BACKLASH GAUGE | 1 | |
| PWC72812 | BACKLASH GAUGE | 1 | |
| RB T102095 | ANCHOR ASSEMBLY, TAIL ROTOR GEARBOX BACKLASH TOOL | 3 | |
| RB T101283-101 | Main Rotor Drive Gear Backlash Tool | 1 | |
| RB T101509 | Transmission Backlash Tool Set | 3 | |
| RB T101509P | BACKLASH TOOL SET, MAIN TRANSMISSION | 1 | |
| RB T101510 | BACKLASH TOOL SET, MAIN TRANSMISSION | 2 | |
| RB T101726 | Tool, Backlash | 2 | |
| RB T101735 | Backlash Tool | 3 | |
| RB T101872 | Backlash Tool | 3 | |
| RB T101933 | Intermediate Gear Box Backlash Tool | 1 | |
| RB T101958 | Backlash Tool Set | 1 | |
| RB T101984 | Input Transmission Backlash Tool Set | 1 | |
| RB T102030 | Backlash Tool | 2 | |
| RB T102071 | Backlash Sump Main Transmission Tool Set | 1 | |
| RB T102084 | Backlash Tool | 1 | |
| RB T103104 | Backlash And Adapter Removal Outboard Quill | 1 | |
| RB T103117 | Backlash Tool | 1 | |
| RB T103118 | Main Transmission Collector Gear Backlash Restraint | 1 | |
| RB T103119 | Main Transmission Input Pinion Backlash Tool Set | 1 | |
| RB T103120 | Backlash Tool | 1 | |
| RB T103128-113 | Tool Set Backlash Gear Box | 1 | |
| RB T103208-101 | Backlash Tool Set | 1 | |
| RB0006-401-00736 | Main Transmission Backlash & Runout Insp. Fixtures | 1 | |
| RB0006-401-00736-214 | Main Tran Backlash & Runout Pin | 1 | |
| RBT101735 | BACKLASH TOOL SET, TRANSMISSION ACCESSORY DRIVE GEAR | 3 | |
| RBT102093 | ANCHOR ASSEMBLY, TAIL ROTOR GEARBOX BACKLASH TOOL | 2 | |
| RBT18513 | Main Transmission Input Gearshaft Backlash Tool | 1 | |
| RBT400209-D2 | Drive and Sump Assembly, Input Quil Backlash Tool | 1 | |
| RBT400209-D3 | Tail Rotor Drive Quil Backlash Tool | 1 | |
| RBT400209-D4 | Drive and Sump Assembly Hydraulic Pump & Tachometer Drive Quil Backlash Tool | 1 | |
| RBT400243 | Backlash Clamp Set (412-240-011-101) | 1 | |
| RBT400251 | Backlash Tool (412-240-010-101) | 1 | |
| RBT400257 | Backlash Bar (407-240-020-101) | 1 | |
| RBT400313 | Main Transmission Backlash Tool | 2 | |
| RBT400314 | Main Transmission Backlash Tool | 2 | |
| RBT400315 | Main Transmission Backlash Tool | 1 | |
| RBT400330 | Accessory Drive Gear Backlash Tool | 1 | |
| ROC8M0034297 | BACKLASH FLAG. | 1 | |
| ROC8M0034342 | BACKLASH WRENCH | 1 | |
| RT115-015 | PARKER BAYSIDE: RT SERIES STEALTH MULTIDRIVE GEARBOX, RIGHT ANGLE, HOLLOW SHAFT, 115MM FRAME SIZE, 15:1 RATIO, STANDARD BACKLASH | 1 | |
| S500-271011-TFIX01-0001 | Aileron Backlash Arm | 1 | |
| S500-272011-TFIX01 | Rudder Backlash Bar | 1 | |
| S500-273011-TFIX01-0001 | Backlash Check Tool | 1 | |
| SPL-1752 | EQUIPMENT - CHECK, JACKSCREW BACKLASH, HORIZONTAL | 1 | |
| T1012030 | BACKLASH CLAMP | 1 | |
| T101350 | BACKLASH CLAMP | 1 | |
| T101509 | BACKLASH TOOL SET, MAIN TRANSMISSION | 1 | |
| T101510 | BACKLASH TOOL SET, MAIN TRANSMISSION | 1 | |
| T101511 | GEAR BOX BACKLASH | 1 | |
| T101735 | BACKLASH TOOL SET, TRANSMISSION ACCESSORY DRIVE GEAR | 1 | |
| T101872 | BACKLASH ARM | 1 | |
| T102030 | BACKLASH TOOL | 1 | |
| T102093 | ANCHOR ASSEMBLY, TAIL ROTOR GEARBOX BACKLASH TOOL | 1 | |
| T103216-101 | INPUT ADAPTER SPANNER BACKLASH BAR (SPANNER ASSEMBLY) | 1 | |
| T103326-101 | BACKLASH BAR ASSY,X | 1 | |
| T3009877 | ANTIBACKLASH GEAR CLIP | 1 | |
| T3011033 | ANTIBACKLASH GEAR CLIP | 1 | |
| TF50B27522 | SET OF BACKLASH MEASURING FIXTURES | 1 | |
| TMA2261 | BACKLASH CHECK FIXTURE | 1 | |
| TMY20-27-522 | FOR WING FLAP ACTUATOR BACKLASH | 2 | |
| ph1407211000-000 | DEVICE, MEASUREMENT TEST - BACKLASH | 1 | |
| ACE-01623 401 | BACKLASH MEASUREMENT. HORIZONTAL STAB ACTUATOR | 1 | |
| С27030-94 | TEST EQUIPMENT - FLAP SCREW BACKLASH | 1 | |
| CHA141478 | BACKLASH CHECKING TOOL,FLAP SCREWJACKS 1 | 4 | |
| CHA700-224 | ADAPTER,BACKLASH CHECKING,USED TO CHECK | 6 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
