| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 212-030-163-053 | ATTACHMENT | 1 | |
| 212-030-163-057 | ATTACHMENT | 1 | |
| 212-030-164-043 | ATTACHMENT | 1 | |
| 212-030-164-047 | ATTACHMENT | 1 | |
| 9300 | ATTACHMENT | 1 | |
| 9301 | ATTACHMENT | 1 | |
| 6796089 | Attachment | 4 | |
| 6797062 | Attachment | 2 | |
| A71006-44 | ATTACHMENT | 1 | |
| G71009-163 | Attachment | 1 | |
| G71009-59 | Attachment | 1 | |
| HC132H0034-000 | ATTACHMENT | 5 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 6796089 | ATTACHMENT (CALIBRATION) | 1 | |
| (CALIB) 7K804427D520 | Crane attachment-Wing lifting bracket (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98L27408549000 | EXTRACTR EXTRACTOR-ATTACHMENT BOLTS,THSA (CALIBRATION) (CALIBRATION) | 1 | |
| 0000010260 | ATTACHMENT SCREW | 1 | |
| 001U535A0300000 | Tool Set Top Fairing Attachment | 1 | |
| 01-0400-0000 | AIRCRAFT ATTACHMENT HEAD | 9 | |
| 01-0506-0000 | ATTACHMENT HEAD | 6 | |
| 01-0507-0000 | TOWBAR ATTACHMENT HEAD | 2 | |
| 01-0538-0000 | AIRCRAFT ATTACHMENT HEAD | 2 | |
| 01-0540-0010 | TOWBAR ATTACHMENT HEAD | 2 | |
| 01-0542-0010 | TOW BAR, ATTACHMENT HEAD | 7 | |
| 01-0558-0000 | ATTACHMENT HEADS | 6 | |
| 01-0571-0010 | ATTACHMENT HEAD ??? TRANSPORTABLE TOW BAR | 2 | |
| 01-0571-0011 | ATTACHMENT HEAD ??? TRANSPORTABLE TOW BAR | 7 | |
| 01-0571-011 | ATTACHMENT HEAD - TRANSPORTABLE TOW BAR | 1 | |
| 01-0571−0011 | ATTACHMENT HEAD - TRANSPORTABLE TOW BAR | 7 | |
| 01-0578-0010 | TOW BAR ATTACHMENT H | 4 | |
| 01-0582-0011 | HEAD - TOWBAR ATTACHMENT | 8 | |
| 01-0594-0000 | AIRCRAFT ATTACHMENT HEAD (CE) | 5 | |
| 01-0597-0000 | TOWBAR ATTACHMENT HEAD | 10 | |
| 01-0610-0000 | AIRCRAFT ATTACHMENT HEAD (CE) WITH SHEAR | 4 | |
| 01-0610-40 | TOW HEAD A/C ATTACHMENT HEAD | 1 | |
| 01-0612-0000 | AIRCRAFT TOWBAR ATTACHMENT HEAD | 3 | |
| 01-0624-0000 | AIRCRAFT ATTACHMENT HEAD | 2 | |
| 01-0625-0000 | TRONAIR 01-0625-0000 – TOWBAR HEAD ATTACHMENT FOR PILATUS PC-12 & PC-24 AIRCRAFT | 3 | |
| 01-0701-0000 | REQUIRED, AIRCRAFT ATTACHMENT HEAD (CLAMP TYPE) | 3 | |
| 01-0705-0002 | AIRCRAFT ATTACHMENT HEAD (PIN TYPE) | 1 | |
| 01-0710-0000 | REQUIRED, AIRCRAFT ATTACHMENT HEAD (CLAMP TYPE) | 1 | |
| 01-0806-0010 | TOWBAR ATTACHMENT HEAD | 4 | |
| 01???0571???0011 | ATTACHMENT HEAD ??? TRANSPORTABLE TOW BAR | 7 | |
| 01−0571−0011 | Attachment Head − Transportable Tow Bar | 7 | |
| 046140 | OFFSET WRENCH - SEATLEG ATTACHMENT RECARO | 3 | |
| 0205560120 | OUTLET CONE,ATTACHMENT | 1 | |
| 022-507-468 | GEIT SCC-468 COMBINATION SOFT CARRY CASE W/ SUN SHIELD SHOULDER STRAP & ATTACHMENT HARDWARE. | 1 | |
| 0235227570 | ATTACHMENT BRACKET | 1 | |
| 0249922150 | ATTACHMENT PLATE | 1 | |
| 0319101420 | ATTACHMENT ENGINE | 1 | |
| 0319738730 | SUPPORT,HARNESS ATTACHMENT | 1 | |
| 0319991660 | ATTACHMENT TAB | 1 | |
| 0319991670 | ATTACHMENT TAB | 1 | |
| 0381-1928 | ATTACHMENT, STANDARD CUTTING 90 DEG. HEAD ANGLE, , MODEL NO. CA2460 WITH CUTTING ATTACHMENT ,MNF, VICTOR. | 1 | |
| 04-6032-0100 | BATTERY LIFT 300 LB/136 KG CAPACITY. TO BE DELIVERED WITH CRANE HOOK ATTACHMENT KIT P/N K-3057 AND BATTERY PLATFORM P/N K-3712 (TRONAIR). QUOTATION SHOULD INCLUDE LIFT AND KITS. | 3 | |
| 050083-10 | Mitutoyo 050083-10 75mm Depth Base Attachment | 1 | |
| 050084-10 | Mitutoyo 050084-10 100mm Depth Base Attachment | 1 | |
| 050085-10 | Mitutoyo 050085-10 125mm Depth Base Attachment | 1 | |
| 057-0899-03 | TORQUE WRENCH ATTACHMENT | 1 | |
| 057-0900-04 | TORQUE WRENCH ATTACHMENT | 1 | |
| 057-0901-03 | TORQUE WRENCH ATTACHMENT | 2 | |
| 07-595C-1 | Reach-In 90° Attachment Kit (Capacity: 3/16") (For use with: Cleco E3,E4-CP 3X & 4X Types) (Add to cart: Add To Cart) | 1 | |
| 07-595C-2 | Reach-In 90° Attachment Kit (Capacity: 3/16") (For use with: Cleco E3,E4-CP 3X & 4X Types) (Add to cart: Add To Cart) (Capacity: 3/16") (For use with: Jiffy 200 & 300-IR-AVC 111&121) (Add to cart: Add To Cart) | 1 | |
| 08-4053-0013 | Engine Compressor Washer (Ce) - 12 Gallon Tanks Capacity - No wand, T-hose attachment | 6 | |
| 08-4058-0013 | Engine Compressor Washer. Sikorsky (Ce) - 12 Gallon Tank Capacity - No wand, hose attachment | 4 | |
| 091-6739 | OIL DRAIN ATTACHMENT | 1 | |
| 0UT131 | ATTACHMENT TOOL | 4 | |
| 0UT135 | ATTACHMENT TOOL | 3 | |
| 1-1 | 90° "Midget" Drilling Attachment - Standard Duty - MADE IN USA! | 1 | |
| 1-1KIT | 11 Piece 90 Degree Drill Attachment Kit - MADE IN USA! | 2 | |
| 101468E | Mitutoyo 101468E Ball Attachment 0.2" | 1 | |
| 101468M | Mitutoyo 101468M Ball Attachment 5mm | 1 | |
| 10PRE65B00161-1 | PROTECTIVE EQUIPMENT - BOLT ACTUATOR ATTACHMENT, WING LANDING GEAR | 9 | |
| 114-1248 | BF GOODRICH CO THE AEROSPACE DIV AIRCRAFT WHEEL AND BRAKE BRAKE PUMPING ATTACHMENT | 3 | |
| 114-239 | RADIAL (SPIN) RIVETING PEEN FOR ATTACHMENT OF THE INSERT TO THE THRUST PLATE | 2 | |
| 1151 | PULLER ATTACHMENT | 1 | |
| 1159GSE40125-7 | FUEL PANEL ATTACHMENT POINT | 1 | |
| 1159TEM20506-1 | TAIL ATTACHMENT POINT | 1 | |
| 13029 | OFFSET DRILL ATTACHMENT PANCAKE ADAPTER SHORT | 1 | |
| 13529 | OFFSET DRILL ATTACHMENT (PANCAKE ADAPTER) | 1 | |
| 12984939 | CROWFOOT ATTACHMENT | 1 | |
| 1336-20-28 | REVERSE PANCAKE DRILL ATTACHMENT | 1 | |
| 13520 | DRILL ATTACHMENT PANCAKE MAGNAVON MODEL 1336-20-28 | 1 | |
| 13805A | LONG TYPE ANGLE DRILL ATTACHMENT | 1 | |
| 13807A | LTD ATTACHMENT_LONG | 1 | |
| 139-00-112-00 | ATTACHMENT BAGGAGE BAR | 2 | |
| 139-00-240-91 | ATTACHMENT KIT SEATPAN | 1 | |
| 14-1723 | TRIMMER ATTACHMENT | 1 | |
| 14-2187 | ATTACHMENT ROUTER | 2 | |
| 14835A | PAN CAKE ATTACHMENT-JIFFY | 1 | |
| 14836A | PAN CAKE ATTACHMENT-JIFFY | 1 | |
| 14839A | PAN CAKE ATTACHMENT-JIFFY | 1 | |
| 14841A | PAN CAKE ATTACHMENT-JIFFY | 1 | |
| 14988 | 45 DEGREE DRILL ATTACHMENT, INTERNAL THREAD CODE A | 1 | |
| 17800 | 90º DRILL ATTACHMENT | 1 | |
| 144274 | Pistol Grip Attachment for VB-Series (for Push-to-Start models) | 1 | |
| 144354 | Pistol Grip Attachment for VZ-Series (for Push-to-Start models) | 1 | |
| 144355 | Pistol Grip Attachment for VZ-Series (for Lever Start models) | 1 | |
| 144364 | Pistol Grip Attachment for BL-7000 | 1 | |
| 1490024 | CROWFOOT ATTACHMENT, CROW-RING 3/8" MODEL 440A | 1 | |
| 14988A | 45 DEGREE DRILL ATTACHMENT, INTERNAL THREAD CODE A | 2 | |
| 15-1580 | SUPERSONIC JUNIOR AIR VAC 18" FLEX HOSE ATTACHMENT INCL. | 1 | |
| 15-214FC | Foot Control Attachment (For use with: 214 Type Riveters) (Add to cart: Add To Cart) | 1 | |
| 15-2C | Foot Control Attachment (For use with: 214 Type Riveters) (Add to cart: Add To Cart) (For use with: CP0351 Type Riveters) (Add to cart: Contact us to order) | 1 | |
| 15000A | JIFFY 360 DEGREE DRILL ATTACHMENT | 1 | |
| 15000GA | JIFFY 360 DEG ATTACHMENT | 1 | |
| 15000M | LIMITED ACCESS 360 DEGREE ATTACHMENT, INTERNAL THREAD CODE A | 1 | |
| 15000MA | LIMITED ACCESS 360 DEGREE ATTACHMENT, INTERNAL THREAD CODE A | 1 | |
| 15021A | JIFFY INDEXABLE PANCAKE DRILL ATTACHMENT | 1 | |
| 1557P | DRILL BASE ATTACHMENT FOR PIPE | 1 | |
| 170-10 | TORQ-SET BIT THAT REMOVES OR INSTALLS THE INS ERT ATTACHMENT SCREWS | 4 | |
| 170B63-2 | ATTACHMENT FLANGE | 1 | |
| 19000- 515 | PRESSURIZATION ATTACHMENT | 1 | |
| 1C8017 | MODULE LIFT ATTACHMENT | 1 | |
| 1C8017G01 | SET, LIFT ATTACHMENT | 1 | |
| 2 EPHYR ZT 421 | Angle Drill Attachment | 1 | |
| 20-127-4 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-127-45-4 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 20-128-360 | 360° Snake Drill Attachment (Capacity: 1/4") (Spindle thread: 1/4"-28) (Overall height: 3" (76 mm)) (Side to center: .385 (10 mm)) (Diameter -overall length: .608 (15 mm) -- 30" (762 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-128-4 | USATCO Snake Drill Attachments (Type: 90° Angle Head) (Capacity-spindle thread: 1/4"--1/4"-28) (Overall height-side to center: 1-9/32" (33 mm)--.384" (10mm)) (Diameter: N/A) (Overall lenght: 30" (762mm)) (Add to cart: Add To Cart) | 1 | |
| 20-128-45-4 | USATCO Snake Drill Attachments (Type: 90° Angle Head) (Capacity-spindle thread: 1/4"--1/4"-28) (Overall height-side to center: 1-9/32" (33 mm)--.384" (10mm)) (Diameter: N/A) (Overall lenght: 30" (762mm)) (Add to cart: Add To Cart) (Type: 45° Angle Head) ( | 1 | |
| 20-129-4 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 20-130-4 | USATCO Snake Drill Attachments (Type: 90° Angle Head) (Capacity-spindle thread: 1/4"--1/4"-28) (Overall height-side to center: 1-9/32" (33 mm)--.384" (10mm)) (Diameter: N/A) (Overall lenght: 30" (762mm)) (Add to cart: Add To Cart) (Type: 45° Angle Head) ( | 1 | |
| 20-131-4 | USATCO Snake Drill Attachments (Type: 90° Angle Head) (Capacity-spindle thread: 1/4"--1/4"-28) (Overall height-side to center: 1-9/32" (33 mm)--.384" (10mm)) (Diameter: N/A) (Overall lenght: 30" (762mm)) (Add to cart: Add To Cart) (Type: 45° Angle Head) ( | 1 | |
| 20-132-20 | USATCO Snake Drill Attachments (Type: 90° Angle Head) (Capacity-spindle thread: 1/4"--1/4"-28) (Overall height-side to center: 1-9/32" (33 mm)--.384" (10mm)) (Diameter: N/A) (Overall lenght: 30" (762mm)) (Add to cart: Add To Cart) (Type: 45° Angle Head) ( | 1 | |
| 20-133-20 | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 20-134-1C | USATCO Snake Drill Attachments (Type: 90° Angle Head) (Capacity-spindle thread: 1/4"--1/4"-28) (Overall height-side to center: 1-9/32" (33 mm)--.384" (10mm)) (Diameter: N/A) (Overall lenght: 30" (762mm)) (Add to cart: Add To Cart) (Type: 45° Angle Head) ( | 1 | |
| 20-134-2C | USATCO Snake Drill Attachments (Type: 90° Angle Head) (Capacity-spindle thread: 1/4"--1/4"-28) (Overall height-side to center: 1-9/32" (33 mm)--.384" (10mm)) (Diameter: N/A) (Overall lenght: 30" (762mm)) (Add to cart: Add To Cart) (Type: 45° Angle Head) ( | 1 | |
| 20-350 | Socket Drive Angle Drill Attachments (Description: 90° Angle Head, 1/4 Square Drive) (Diameter: 3/4" (19 mm)) (Head size: 1.60" (41 mm)) (Overall length: 7" (178 mm)) (Side to center: 1-3/8" (35 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-720 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-725 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-730 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-735 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-745 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-755 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-820 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-825 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-830 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 3 | |
| 20-835 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-845 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-855 | Thin Offset Angle Drill Attachments (Description: Straight - 3/8" Offset Thickness) (H' overall height: 1-1/8" (29 mm)) (L1' shaft offset: 2-7/16" (62 mm)) (L2' overall length: 3-3/16" (81 mm)) (Add to cart: Add To Cart) (Description: Straight - 3/8" Offs | 1 | |
| 20-T-21 | Flat Offset Angle Drill Attachments (H' overall height: 5-5/8" (143 mm)) (L1' shaft offset: 3/4" (19 mm)) (L2' shaft offset: 1-1/2" (38 mm)) (Type: 1/8" Capacity - 1/4" Offset Thickness) (Add to cart: Add To Cart) | 1 | |
| 20-T-23 | Flat Offset Angle Drill Attachments (H' overall height: 5-5/8" (143 mm)) (L1' shaft offset: 3/4" (19 mm)) (L2' shaft offset: 1-1/2" (38 mm)) (Type: 1/8" Capacity - 1/4" Offset Thickness) (Add to cart: Add To Cart) (H' overall height: 6-1/2" (165 mm)) (L1' | 1 | |
| 20-T-235 | Flat Offset Angle Drill Attachments (H' overall height: 5-5/8" (143 mm)) (L1' shaft offset: 3/4" (19 mm)) (L2' shaft offset: 1-1/2" (38 mm)) (Type: 1/8" Capacity - 1/4" Offset Thickness) (Add to cart: Add To Cart) (H' overall height: 6-1/2" (165 mm)) (L1' | 1 | |
| 20-T-25 | Flat Offset Angle Drill Attachments (H' overall height: 5-5/8" (143 mm)) (L1' shaft offset: 3/4" (19 mm)) (L2' shaft offset: 1-1/2" (38 mm)) (Type: 1/8" Capacity - 1/4" Offset Thickness) (Add to cart: Add To Cart) (H' overall height: 6-1/2" (165 mm)) (L1' | 1 | |
| 20-T-635 | Offset Pancake Snake Drill Attachments (Orifice: 7/16" (11 mm)) (Shaft offset: 2-5/16" (59 mm)) (Offset length: 3-3/16" (81 mm)) (Overall length: 30" (76 cm)) (Add to cart: Add To Cart) | 1 | |
| 2000194 | G200S "Short" towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. Nose gear attachment is mounted to a standard -2R shank with radial/linear shear protection incorporated. Compatible towbar(s): TB1, TB2.5, TB3 (w/Reducer), TB125 (w | 1 | |
| 2000468 | G200 towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. 60" aluminum extension tube with head attachment. Extension allows sufficient clearance under nose of aircraft to use with standard length towbar, eliminating the need for a | 1 | |
| 20193-25 | PIN,REAR ATTACHMENT | 1 | |
| 206L-515 | BLADE TIE-DOWNS, (semi-rigid) w/telescoping attachment handle (set of 3) | 1 | |
| 208062 | Mitutoyo 208062 Spindle attachment tip, Spline | 1 | |
| 208063 | Mitutoyo 208063 Spindle attachment tip, Comparator | 1 | |
| 208064 | Mitutoyo 208064 Spindle attachment tip, Blade | 1 | |
| 208065 | Mitutoyo 208065 Spindle attachment tip, Knife Edge | 1 | |
| 208066 | Mitutoyo 208066 Spindle attachment tip, Disc | 1 | |
| 210EFTAMY | SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH | 1 | |
| 21C7037P36 | RATCHET ATTACHMENT,SOCKET WRE | 1 | |
| 21C7037P37 | RATCHET ATTACHMENT,SOCKET WRE | 1 | |
| 21C7804G01 | PULLER ATTACHMENT | 1 | |
| 2200126 | SELF-CONTAINED AVIATION VACUUM ANCHOR SYSTEM WITH BOTTLE ATTACHMENT | 1 | |
| 230-405 | BLADE TIE-DOWNS, (semi-rigid) w/telescoping attachment handle (set of 3) | 1 | |
| 242FC | SOCKET WRENCH CROWFOOT ATTACHMENT SET MODEL: 242FC | 2 | |
| 267-0P18 | KIT, QUICK RELEASE ATTACHMENT | 1 | |
| 290435-1-1 | EXTRACTOR - GIMBAL PIN - SLAT JACK ATTACHMENT | 5 | |
| 2C14130G04MOD | CF6-50 ENG LIFT BEAM ATTACHMENT | 1 | |
| 2KEX-101 | ENGINE COVERS, OEM design (revised for hook attachment, 2 ball lock pins on lower attach points, 2 hooks on upper attach points) (set of 4) | 1 | |
| 2KEX-105 | INTAKE COVERS, OEM design (revised for hook attachment) (set of 2) | 1 | |
| 2KEX-106 | EXHAUST COVERS, OEM design (revised for hook attachment) (set of 2) | 1 | |
| 30-820-2461 | Sylvac Acute Angle Attachment for Protractor | 1 | |
| 332A93-4110-00 | DIAL GAUGE WITH STRAP ATTACHMENT | 1 | |
| 3402046-1 | SCREWDRIVER ATTACHMENT, SOCKET WRENCH | 1 | |
| 345 | 45° "Midget" Drill Attachment - Heavy Duty - MADE IN USA! | 1 | |
| 38247 | 38247;Short/Open/Load w/Lanyard Attachment Point | 1 | |
| 300869 | ENGINE ATTACHMENT | 1 | |
| 3800060 | 60 DEG ANGULAR ATTACHMENT_[3800060] | 1 | |
| 34020461 | SCREWDRIVER ATTACHMENT, SOCKET WRENCH | 1 | |
| 2249500080 | ATTACHMENT ARM | 1 | |
| 350A96370026 | ATTACHMENT CUP | 1 | |
| 350A96370026/PHP | ATTACHMENT CUP | 1 | |
| 350А93-3505-00 | DEVICE FOR DISMANTLING THE FINGERS OF THE CARDAN ATTACHMENT | 1 | |
| 365A93-3347-00 | WRENCH,TGB ATTACHMENT CONTROL | 1 | |
| 365A93-3362-20 | WRENCH,TRH ATTACHMENT NUT | 1 | |
| 365A93334700 | WRENCH,TGB ATTACHMENT CONTROL | 1 | |
| 365A93336220 | WRENCH TRH ATTACHMENT NUT | 1 | |
| 3AA617-6329-001 | CAP REMOVAL TOOL SLIDE HAMMER ATTACHMENT | 1 | |
| 3AA617-6330-001 | OUTER ROTARY JOINT ASSEMBLY TOOL SLIDE HAMMER ATTACHMENT | 1 | |
| 3G5305G00131 | TAIL BOOM LIFTING SLING & ATTACHMENT | 1 | |
| 3G6205G21631 | TOOL KIT, M/R DAMPER ATTACHMENT BOLT REM | 1 | |
| 3G6205G2163L | TOOL KIT, M/R DAMPER ATTACHMENT BOLT REM | 1 | |
| 3G6405G02131 | TAIL ROTOR BLADE DAMPER ATTACHMENT BUSHING REMOVAL | 1 | |
| 4000-2/30 | DREMEL 4000 SERIES ROTARY TOOL KIT WITH MULTIPLE ATTACHMENTS AND ACCESSORIES FOR VERSATILE APPLICATIONS. | 1 | |
| 4000-4/65 | DREMEL 4000 ROTARY TOOL 175 W, ROTARY MULTI TOOL KIT WITH 4 ATTACHMENT 65 ACCESSORIES | 7 | |
| 403189-1 | SCREWDRIVER ATTACHMENT, SOCKET WRENCH | 1 | |
| 407-302 | BLADE TIE-DOWNS w/Telescoping Attachment Handle (set of 5) | 1 | |
| 412-502 | BLADE TIE-DOWNS, (semi rigid) w/telescoping attachment handle (set of 5) | 1 | |
| 429-350 | BLADE TIE-DOWNS, (semi rigid) w/telescoping attachment handle (set of 5) | 1 | |
| 460004787 | Spanner - attachment pin head M/G retraction jack | 1 | |
| 500.60.12.004 | WING ATTACHMENT INSPECTION KIT (PILATUS PC-12) | 1 | |
| 505-500 | BLADE TIE-DOWNS, w/ telescoping attachment pole (set of 3) | 1 | |
| 5120-00-633-5085 | PULLER ATTACHMENT MECHANICAL | 1 | |
| 53-127-4C | USATCO Angle Drill Attachments (Description: 90° Angle Head, 1/4 Capacity, 1/4-28 Thread) (Diameter: 3/4" (19 mm)) (Head size: 1-9/32" (33 mm)) (Overall length: 7-1/8" (181 mm)) (Side to center: 1-1/4" ((32 mm)) (Add to cart: Add To Cart) (Description: | 1 | |
| 53-127K | USATCO Angle Drill Attachment Kit (Description: Complete Kit) (Add to cart: Add To Cart) | 1 | |
| 53-595C-1 | Rivet Gun Angle Attachment Kits (Attachment: 07-595C-1) (For use with: Cleco E3 & E4; CP 3X & 4X Types) (Add to cart: Add To Cart) | 1 | |
| 53-595C-2 | Rivet Gun Angle Attachment Kits (Attachment: 07-595C-1) (For use with: Cleco E3 & E4; CP 3X & 4X Types) (Add to cart: Add To Cart) (Attachment: 07-595C-2) (For use with: Jiffy 200 & 300; IR; AVC 111 & 121) (Add to cart: Add To Cart) | 1 | |
| 53-77 | Drill Attachment Conversion Assembly (Includes: 1/4"-28 Adapter 5/32" Chuck) (Add to cart: Add To Cart) | 1 | |
| 57130-6000 | Sealing Cap Attachment Tool | 1 | |
| 57131-6000 | Sealing Cap Attachment Tool | 1 | |
| 57147-6000 | Sealing Cap Attachment Tool | 1 | |
| 57148-6000 | Sealing Cap Attachment Tool | 1 | |
| 57171-6000 | Sealing Cap Attachment Tool | 1 | |
| 5838444-1 | APU LIFT ATTACHMENT | 1 | |
| 600-061 | HARNESS ATTACHMENT | 6 | |
| 6F6220G08131 | INBOARD DAMPER ATTACHMENT REMOVAL TOOL | 1 | |
| 6F6220G08132 | INBOARD DAMPER ATTACHMENT REMOVAL TOOL | 1 | |
| 6F6410A03131 | DAMPER LINK ATTACHMENT ASSY | 1 | |
| 717NCLS-D002 (SWIVEL) | NOSE COWL SLING ATTACHMENT(0011486) | 1 | |
| 7250TC14060 | Tow Attachment, Assy | 1 | |
| 83769-14-17 | ENGINE ATTACHMENT BOLT | 3 | |
| 846-824-010 | ANGLE WRENCH REAR ATTACHMENT ASSEMBLY AIRCELLE S.A. | 1 | |
| 846-824-020 | RETAINER FOR REAR ATTACHMENT ASSEMBLY AIRCELLE S.A. | 1 | |
| 846‑824‑010 | ANGLE WRENCH REAR ATTACHMENT ASSEMBLY | 1 | |
| 856A2366G01 | RING, BOLT RETENTION - CONICAL ROTOR SUPPORT ATTACHMENT BOLTS | 4 | |
| 878 | Moore & Wright 878 Micrometer Ball Attachment 0.256" & 0.268" | 1 | |
| 80229 | RIGID ATTACHMENT | 1 | |
| 878M | Moore & Wright 878M Micrometer Ball Attachment 6.5mm & 6.8mm | 1 | |
| 8G6220G01931 | M/R DAMPER ATTACHMENT BOLT REMOVAL TOOL | 1 | |
| 8G6220G03431 | TOOL KIT, M/R DAMPER ATTACHMENT BOLT REM | 1 | |
| 8G6430G02931 | TOOL,T/R BLADE DAMPER ATTACHMENT BUSHING REMOVAL | 1 | |
| 8PRE65B00161-1 | PROTECTIVE EQUIPMENT BOLT - TRUNNION ATTACHMENT, WING LANDING GEAR | 4 | |
| 90-009 | FLAT OFFSET ANGLE ATTACHMENT 4 3/8" OVERALL LENGTH | 1 | |
| 90-010 | FLAT OFFSET ANGLE ATTACHMENT 5 3/4" OVERALL LENGTH | 1 | |
| 90660 | 1.5” WET/DRY INDUSTRIAL TANK VAC ATTACHMENT SET | 1 | |
| 900764 | Mitutoyo 900764 Depth Gauge Attachment with Metric Type Holding Bar | 1 | |
| 900878 | Mitutoyo 900878 Depth Gauge Attachment with Inch Type Holding Bar | 1 | |
| 6796089 | TOOL, ATTACHMENT, PROPELLER BREAK RELEASE | 4 | |
| 6797062 | ATTACHMENT TOOL, PROPELLER BRAKE RELEASE | 2 | |
| 9045001 | COMPARATOR - BETA LIGHT : PN 9045001 / MAVOLUX 5032B USB (LUMINANCE ATTACHMENT P/N M516G AND ADAPTER DISK P/N M499G MUST BE USED WITH THE LUXMETER) OR MAVO-MONITOR USB. | 11 | |
| 81271900 | ATTACHMENT-MILLING | 1 | |
| 700045580 | ENGINE HANDLING SLING ATTACHMENT | 1 | |
| 8813415400 | GENERATOR FLANGE ATTACHMENT ASSY | 1 | |
| 8815099743 | ATTACHMENT CLAMP | 1 | |
| 9043N-10-02/3 | HOSE WITH ATTACHMENTS | 1 | |
| 91-6739 | OIL DRAIN ATTACHMENT, ENGINE OIL TANK | 11 | |
| 9300 -2505-625 | HI-LOK ATTACHMENT | 1 | |
| 9300-3125-945 | SHORT-OFFSET-L-TYPE-HI-LOK-INSTALLATION ATTACHMENT | 1 | |
| 9301 -2505-625 | HI-LOK ATTACHMENT | 1 | |
| 93893-3360 | 360 ° DRILL ATTACHMENT | 1 | |
| 93893-3360 360° | ANGLE DRILL ATTACHMENT | 1 | |
| 93893-3380FD5 | FD SERIES “L” TYPE OFF-SET ATTACHMENTS | 1 | |
| 93893-3380FD7 | FD SERIES “L” TYPE OFF-SET ATTACHMENTS | 1 | |
| 93893-3380FD9 | FD SERIES “L” TYPE OFF-SET ATTACHMENTS | 1 | |
| 93893-3380PS | 45°ANGLE DRILL ATTACHMENT | 1 | |
| 93893-4580 | 45° ANGLE DRILL ATTACHMENT | 1 | |
| 970531 | OXYGEN REGULATOR ATTACHMENT | 1 | |
| 98A27501501000 | SLEEVE-LOCKING,FLAP SCREW JACK NO.1 HEAD ATTACHMENT | 4 | |
| 98A27504006000 | EXTRACTOR - PIN, FORWARD ATTACHMENT, FLAP TRACK NO.2 | 6 | |
| 98A27504008000 | EXTRACTOR-ATTACHMENT PIN-FORWARD FLAP | 6 | |
| 98A27504016000 | ADJUSTING TOOL-NUT SLEEVE-FLAP FORWARD ATTACHMENT | 8 | |
| 98A27504019000 | BULLET-FLAP FORWARD ATTACHMENT PIN | 8 | |
| 98A27504024000 | Extractor pin-fwd attachment flap tracks 3 4 5 | 8 | |
| 98A27504025000 | Extractor pin-fwd attachment flap tracks 6 | 8 | |
| 98A27508032000 | SOCKET WRENCH SET -FRICTION BUSH,TRACK REAR ATTACHMENT | 1 | |
| 98A27508033000 | TOOL SET STA LOC, FLAP VANE SPRING ATTACHMENT, SL90-PN | 1 | |
| 98A27508038000 | SOCKET WRENCH SET - FLAP TRACK REAR ATTACHMENT | 2 | |
| 98A27804000000 | EXTRACTOR-GIMBAL PIN-SLAT JACK ATTACHMENT | 7 | |
| 98A32201001402 | ATTACHMENT MECHANISM | 1 | |
| 98A32301005000 | EXTRACTOR - GIMBAL PIN - SLAT JACK ATTACHMENT | 5 | |
| 98A49007519-47 | ATTACHMENT ADAPTER | 1 | |
| 98A53003500100 | ATTACHMENT PIN | 1 | |
| 98A57604005022 | SHACKLE CABLE ATTACHMENT | 1 | |
| 98A57604005100 | BRACKET-UPPER ATTACHMENT | 1 | |
| 98A57904000000 | BRACKET UPPER ATTACHMENT | 8 | |
| 98A57904000100 | BRACKET-UPPER ATTACHMENT | 1 | |
| 98D09104000000 | TOWING ATTACHMENT | 1 | |
| 98D09104000001 | ATTACHMENT - TOWING | 5 | |
| 98D09104001000 | ATTACHMENT-DEBOGGING | 5 | |
| 98D09104002000 | ATTACHMENT - TOWING | 1 | |
| 98D27203000042 | PEDAL ATTACHMENT ASSY | 1 | |
| 98D27409006000 | THS ACTUATOR ATTACHMENTS REM/INST WRENCH | 16 | |
| 98D49207527200 | ATTACHMENT POINT,COMPLETE | 1 | |
| 98D49207527215 | ATTACHMENT POINT | 1 | |
| 98D49207527300 | ATTACHMENT POINT,COMPLETE | 1 | |
| 98D55308676000 | Extractor vtp attachment bolts | 8 | |
| 98D57004007001 | BLOCK-SLIPPER (REAR SPAR ATTACHMENT BRACKET-ACTUATOR) | 1 | |
| 98D57004019000 | SLIPPER BLOCK(REAR SPAR ATTACHMENT BRACKET-ACTUATOR) | 15 | |
| 98D57004019001 | ATTACHMENT BRACKET-ACTUATOR SLIPPER BLOCK | 12 | |
| 98F27408413000 | EXTRACTOR - ATTACHMENT BOLTS OF | 1 | |
| 98F32104009110 | ATTACHMENT BOLT | 1 | |
| 98F55307511200 | ATTACHMENT REAR HOISTING POINT | 1 | |
| 98F55307511600 | ATTACHMENT,FRONT HOIST POINT | 1 | |
| 98F55308327102 | ATTACHMENT,REAR HOISTING POINT | 1 | |
| 98F55308327112 | ATTACHMENT,FRONT HOIST POINT | 1 | |
| 98L27408549000 | EXTRACTOR-ATTACHMENT BOLTS,THSA | 3 | |
| 98L27408549040 | EXTRACTOR PRIM. ATTACHMENT BOLT THSA BOLZENAUSZIEHER THSA | 1 | |
| 98L27408550042 | EXTRACTOR PRIM. ATTACHMENT BOLT THSA BOLZENAUSZIEHER THSA | 1 | |
| 98L27408551100 | EXTRACTOR PRIM. ATTACHMENT BOLT THSA BOLZENAUSZIEHER THSA | 1 | |
| 98L27408552102 | EXTRACTOR PRIM. ATTACHMENT BOLT THSA BOLZENAUSZIEHER THSA | 1 | |
| 98L27508594118 | BELTATTACHMENT | 1 | |
| 98L27508594120 | CONTAINERATTACHMENT | 1 | |
| 98L54003003110 | HOIST ATTACHMENT | 1 | |
| 98L54503003110 | HOIST ATTACHMENT | 1 | |
| 98S57005005000-REVB | EXTRACTOR TOOLING FOR ATTACHMENT BOLTS OF WING TO FUSELAGE STRUCTURE | 1 | |
| 98V27408001000 | EXTRACTOR THSA PRIM ATTACHMENT BOLTS | 4 | |
| 98V27408730000 | EXTRACTOR THSA PRIM ATTACHMENT BOLTS | 5 | |
| 993893-3380FD5 | FD SERIES ¨L ¨TYPE OFF-SET ATTACHMENT | 1 | |
| 99A34103004000 | EXTRACTOR - GIMBAL PIN - SLAT JACK ATTACHMENT | 10 | |
| A003817D | ATTACHMENT HEAD, | 6 | |
| A094-0000W9 | FIXTURE-ATTACHMENT | 1 | |
| A109BF-3000-1 | ATTACHMENT PIN ASSY | 1 | |
| A25014-30 | ATTACHMENT ASSY | 1 | |
| A27026-7 | BRACKET HOIST FISHPOLE ATTACHMENT FLAP PDU | 6 | |
| A300-27-21-21-0264 | SPECIAL TOOL-RUDDER ATTACHMENT FITTING | 1 | |
| A30199 | HARNESS ATTACHMENT | 8 | |
| A350-501 | BLADE TIE-DOWNS, w/telescoping attachment handle (set of 4) | 1 | |
| A52006-17 | LIFT ATTACHMENT | 1 | |
| A601 | DRILL ATTACHMENT, ANGLE | 1 | |
| A71002-57 | Left T/R attachment assy | 1 | |
| A71002-58 | Right T/R attachment assy | 1 | |
| AA617-6338-001 | ROTOR ASSEMBLY SLIDE HAMMER ATTACHMENT TOOL | 1 | |
| AB57001-VF8 | SLIPPER BLOCKREAR SPAR ATTACHMENT BRACKET-ACTUATOR | 1 | |
| AC-WTR | HOIST ATTACHMENT TO TROLLEY | 1 | |
| ADA737-678 | AIR DATA PROBE ATTACHMENTS | 14 | |
| ADA787-612 | ATMOSPHERIC DATA ATTACHMENT | 4 | |
| ADCF8 | CROWFOOT ATTACHMENT,SOCKET WRENCH | 2 | |
| AFP203 | Upper Attachment Swivel | 1 | |
| AFS-1394 | CARGOLUX CUSTOM 5MHz .187", 40° IN ALUMINUM SHEAR WAVE TRANSDUCER WITH A 1.00" RADIUS FOR THE BOEING REFERENCE STANDARD LUG 1B7- FITTING-SEQUENCE CARRIAGE ATTACHMENT INBOARD TRAILING EDGE FLAP. CASE SIZE: .500"L x .270"W x .350". Includes Test Report... | 1 | |
| AH135-620 | BLADE TIE-DOWNS w/Telescoping Attachment Handle (set of 5) | 1 | |
| AH145-221 | BLADE TIE-DOWNS, w/telescoping attachment handle (set of 5) | 1 | |
| AH145-226 | BLADE TIE-DOWNS, w/telescoping attachment handle (D3 5-blade models) (set of 6) | 1 | |
| AH350-501 | BLADE TIE-DOWNS, w/telescoping attachment handle (set of 4) | 1 | |
| ALS-33709 | Balance Machine Attachment | 1 | |
| ALS33709 | BALANCE MACHINE ATTACHMENT | 1 | |
| AN850832B | TORQUE WRENCH ATTACHMENT | 3 | |
| AN850842B | TORQUE WRENCH ATTACHMENT | 2 | |
| AN8515 | SPANNER ATTACHMENT SET, SOCKET WR | 2 | |
| AN8515-1 | SPANNER ATTACHMENT | 2 | |
| AS350 | AS350 ATTACHMENT HOOKS FOR HELL CARRIER | 1 | |
| AS350 FLOATS | AS350 FLOATS ATTACHMENT HOOKS FOR HELICARRIER | 1 | |
| AS41090C | TAG - ATTACHMENT | 1 | |
| AT313B | PANCAKE DRILL ATTACHMENT | 1 | |
| AT327A-24 | ANGLE ATTACHMENT,DRILL CHUCK | 1 | |
| AT595BK | ANGLE ATTACHMENT KIT (7 THREADS PER INCH | 1 | |
| ATI303B | DRILL ATTACHMENT | 1 | |
| ATI332SC | STRAIGHT OFFSET DRILL ATTACHMENT (ATI TOOL) | 1 | |
| ATI336A | DRILL ATTACHMENT - 7 1/8" STRAIGHT DRIVE | 3 | |
| ATI336B | DRILL ATTACHMENT | 1 | |
| ATI338B | DRILL ATTACHMENT - 24 FLEXIBLE | 1 | |
| ATI339A | DRILL ATTACHMENT - 24 FLEXIBLE | 1 | |
| ATI595BK | ANGLE ATTACHMENT KIT 7 THREADS PER INCH | 3 | |
| ATI595CK | 90° RIVET HAMMER ANGLE ATTACHMENT | 2 | |
| B07005 | TETHER ATTACHMENT FTG -0 AIRPLANE RECOVERY, | 1 | |
| B07005-1 | TETHER ATTACHMENT FITTINGS - STRUT AIRPLANE RECOVERY | 1 | |
| B71042-228 | ATTACHMENT POST FRAM | 1 | |
| B71042-229 | ATTACHMENT POST FRAM | 2 | |
| B71042-230 | ATTACHMENT POST FRAM | 2 | |
| B737-101 | INTAKE COVERS, 300-500 models, w/ heater hose access vent & attachment detail (set of 2) | 1 | |
| B737-151 | INTAKE COVERS, 600-900 models (NG), w/ heater hose access vent & attachment detail (set of 2) | 1 | |
| B737-154 | INTAKE COVERS, CFM LEAP-1B (MAX 7, 8, 9 & 10), w/ heater hose access vent & attachment detail (set of 2) | 1 | |
| B767-110 | INTAKE COVERS, Cold Weather Ops, w/ heater hose access vent & attachment detail (set of 2) | 1 | |
| B777-110 | INTAKE COVERS, PW Engine, Cold Weather Ops w/ heater hose access vent & attachment detail (set of 2) | 1 | |
| B777-120 | INTAKE COVERS, GE Engine, Cold Weather Ops w/ heater hose access vent & attachment detail (set of 2) | 1 | |
| B787-100 | INTAKE COVER, OEM Type, each, Boeing P/N: K10011-2, adjustable straps to bypass attachment detail | 1 | |
| B787-105 | INTAKE COVERS KIT, OEM Type, each, Boeing P/N: K10011-1 (equals qty 2 of K10011-2), adjustable straps to bypass attachment detail (set of 2) | 1 | |
| B787-110 | INLET COVER (GENERAL ELECTRIC), Boeing Tool No: PREFAD48BENC54Z001, 8 ball lock attachment details | 1 | |
| B787-115 | INLET COVER (ROLLS ROYCE), Boeing Tool No: PREFAD48BENC54Z002, 8 ball lock attachment details | 1 | |
| BAT-008 | "Pancake" Drill Attachment | 2 | |
| BAT-347 | 90 Degree Rivet Gun Attachment | 1 | |
| BAT-830 | Long Reach "Pancake" Drill Attachment - MADE IN USA! | 1 | |
| BAT-835 | DRILL ATTACHMENT | 2 | |
| BAT-845 | Long Offset "Pancake" Drill Attachment - 30° Right Hand Attachment - MADE IN USA! | 1 | |
| BAT-855 | Long Offset "Pancake" Drill Attachment - 30° Left Hand Attachment - MADE IN USA! | 1 | |
| BAT008 | PANCAKE DRILLING ATTACHMENT | 2 | |
| BAT830 | LONG REACH "PANCAKE" DRILL ATTACHMENT | 1 | |
| BAT835 | LONG BODY "PANCAKE" DRILL ATTACHMENT | 2 | |
| BBHO-30 | BIG BRUTE HYDRAULIC OFFSET (BBHO) PULLER - TANG MANDREL ATTACHMENT OR, | 1 | |
| BBHO-30A | BIG BRUTE HYDRAULIC OFFSET (BBHO) PULLER - THREADED MANDREL ATTACHMENT | 1 | |
| BI467 | Starrett 18SB PUNCH SPACING ATTACHMENT | 1 | |
| BM125 | Starrett 59F TRAMMEL ATTACHMENT SET | 1 | |
| BRN-20 | DUAL BLEED ATTACHMENT | 1 | |
| BW847 | Starrett 196F HOLE ATTACHMENT | 1 | |
| BY212 | Starrett 212 MICROMETER ATTACHMENT | 1 | |
| BY217 | Starrett 212M MICROMETER ATTACHMENT | 1 | |
| C-12004-1 | BALL SCREW LUBRICATION ATTACHMENT SPRING | 5 | |
| C12004-1 | SPRING BALL SCREW ATTACHMENT | 5 | |
| C12004-6 | Spring Attachment | 17 | |
| C12004-7 | Spring ballscrew lubrication attachment | 7 | |
| C27025-1 | Torque Wrench Eqpt - Rudder PCU Attachment | 11 | |
| C27042-1 | Wrench - Torque Equipment, Rudder Power Control Unit Attachment | 15 | |
| C27042-2 | WRENCH-TRQ EQPT RUDDER PCU ATTACHMENT | 1 | |
| C27205-1 | Torque Wrench Equipment - Rudder PCU Attachment | 1 | |
| C32049-13 | ATTACHMENT BRACKET | 1 | |
| C47596 | C47596 EXTRACTOR UPPER TORQUE LINK-TO-LEG ATTACHMENT PIN | 4 | |
| C47691 | EXTRACTOR PLATE TRUCK ATTACHMENT PIN MLG | 1 | |
| C49010-44 | Fwd Attachment | 1 | |
| C49010-45 | RH Aft Attachment | 1 | |
| C49010-46 | LH Aft Attachment | 1 | |
| C71003-26 | Pin Attachment | 1 | |
| C71003-3 | FITTING ATTACHMENT 2ea (WITH BALL LOCK PINS 2ea) | 5 | |
| C71015-69 | FWD ATTACHMENT LH | 1 | |
| C78019-10 | Pin Arm Attachment | 2 | |
| C78019-18 | PIN STRUT ATTACHMENT | 1 | |
| C78022-6 | FWD ATTACHMENT | 1 | |
| C78022-7 | AFT ATTACHMENT | 1 | |
| CAT5616-16E | LIFTING ATTACHMENT | 1 | |
| CAT5881-5 | TOWBAR ATTACHMENT HEAD (OPTIONAL) | 1 | |
| CE182 | Starrett 247A BALL ATTACHMENT | 1 | |
| CE187 | Starrett 247B BALL ATTACHMENT | 1 | |
| CE192 | Starrett 247C BALL ATTACHMENT | 1 | |
| CE197 | Starrett 247D BALL ATTACHMENT | 1 | |
| CE202 | Starrett 247E BALL ATTACHMENT | 1 | |
| CE207 | Starrett 247MA BALL ATTACHMENT | 1 | |
| CE212 | Starrett 247MB BALL ATTACHMENT | 1 | |
| CE222 | Starrett 247MD BALL ATTACHMENT | 1 | |
| CE227 | Starrett 247ME BALL ATTACHMENT | 1 | |
| CK457 | Starrett 289A ATTACHMENT (COMB SQUARE) | 1 | |
| CK462 | Starrett 289B ATTACHMENT (COMB SQUARE) | 1 | |
| CP22784 | PLATE ATTACHMENT FUEL PUMP | 1 | |
| CP307 | Starrett 392 CENTRE GAUGE ATTACHMENT | 1 | |
| CRJ-106 | INTAKE COVERS, w/ Herman Nelson preheating hose attachment (set of 2) | 1 | |
| CS-295-AG1110402 | MOVABLE BAR ATTACHMENT | 1 | |
| CS-DCM-1N325PTL1B | CUSTOM STRAP ATTACHMENT | 1 | |
| D23278100 | ATTACHMENT NLG TOWING | 1 | |
| D46220 | A300/A310-EXTRACTOR ACT.ATTACHMENT PIN | 5 | |
| D594 | DRAIN ATTACHMENT-LUBE PUMP-PGB | 1 | |
| D60019 | TOWING ATTACHMENT PIN | 1 | |
| D730L | DRAIN ATTACHMENT | 1 | |
| D93B00-201 | ATTACHMENT FLANGE | 1 | |
| DAH602287 | ATTACHMENT-INSTALLATION | 1 | |
| DAH6022887 | ATTACHMENT-INSTALLATION | 1 | |
| DB75-108 | Drain Attachment DB75-108 | 3 | |
| DB75-48 | DRAIN ATTACHMENT | 1 | |
| DB75A-48 | DRAIN ATTACHMENT | 1 | |
| DEWDT7151T | 90° RIGHT ANGLE ATTACHMENT 10 PIECE SET WITH 9 X 25MM SCREWDRIVER BITS | 1 | |
| DG772 | Starrett 657Y INDICATOR ATTACHMENT | 1 | |
| DH997 | Starrett 670A DIAL IND HOLE ATTACHMENT | 1 | |
| DI002 | Starrett 670B DIAL IND HOLE ATTACHMENT | 1 | |
| DI107 | Starrett 671 UNIVERSAL ATTACHMENT | 1 | |
| DK152 | Starrett 696B BALANCING ATTACHMENT | 1 | |
| DK557 | Starrett 708AZ DIAL IND W/O ATTACHMENTS | 1 | |
| DK559 | Starrett R708AZ DIAL IND W/O ATTACHMENT | 1 | |
| DK562 | Starrett 708ACZ DIAL IND W/ATTACHMENTS | 1 | |
| DK564 | Starrett B708ACZ DIAL IND W/ATTACHMENTS | 1 | |
| DK565 | Starrett 708MACZ DIAL IND W/ATTACHMENTS | 1 | |
| DK567 | Starrett 708BZ DIAL IND W/O ATTACHMENTS | 1 | |
| DK577 | Starrett 709AZ DIAL IND W/O ATTACHMENTS | 1 | |
| DK582 | Starrett 709ACZ DIAL IND W/ATTACHMENTS | 1 | |
| DK592 | Starrett 709BCZ DIAL IND W/ATTACHMENTS | 1 | |
| DK597 | Starrett 709MAZ DIAL IND W/O ATTACHMENT | 1 | |
| DK602 | Starrett 709MACZ DIAL IND W/ATTACHMENTS | 1 | |
| DK604 | Starrett 709MALCZ DIAL IND W/ATTACHMENT | 1 | |
| DK878 | Starrett 711-49 HEIGHT GAUGE ATTACHMENT | 1 | |
| DK879 | Starrett 711-35 HEIGHT GAUGE ATTACHMENT | 1 | |
| DS94 | DRAIN ATTACHMENT-LUBE PUMP-PGB | 1 | |
| DT71517T | 90° RIGHT ANGLE ATTACHMENT 10 PIECE SET WITH 9 X 25MM SCREWDRIVER BITS | 1 | |
| E135-620 | BLADE TIE-DOWNS w/Telescoping Attachment Handle (set of 5) | 1 | |
| E145-221 | BLADE TIE-DOWNS, w/telescoping attachment handle (set of 5) | 1 | |
| F46505 | GUIDE FOR POSITIONING GREASE SPOOL AND ATTACHMENT ON MAIN LANDING GEAR TRUNNION | 1 | |
| F72754 | STAB RESTRAINING LINE ATTACHMENT FITTING TWO | 1 | |
| F72754-10 | Stab restraining line attachment fitting | 1 | |
| F72988-3 | ATTACHMENT BEAM SET-HANDLING, ENGINE | 4 | |
| FB70000-2-67/75 | TOWBAR ASSY INC. ATTACHMENT PINS | 1 | |
| FC014A | CROWFOOT ATTACHMENT | 3 | |
| FC24B | CROWFOOT ATTACHMENT,SOCKET WRENCH | 1 | |
| FC26A | CROWFOOT ATTACHMENT,SOKET WRENC | 1 | |
| FI-60 | FI-60;Live Fiber Identifier VP-60 OPM w/LFI Attachment 2.5mm and 1.25mm Adapters | 1 | |
| FIN-LADDER | LADDER WITH FIN ATTACHMENT TOOL | 1 | |
| FP22E | SOCKET DRIVER, PHILL/ NIIN 013673525BIT WITH SOCKET (SOCKET WRENCH ATTACHMENT 3/8") | 2 | |
| FP32A2 | FILLISTER HED ATTACHMENT | 1 | |
| FY5-06814W09-01 | TOOL-AILERON ATTACHMENT BEARING INSTALLATION | 1 | |
| FY5-07287W87-02 | GROOVE NUT-WRENCH SET-RUDDER ATTACHMENT | 1 | |
| G28005-12 | ATTACHMENT PLATE | 1 | |
| G71018-1 | SUPPORT EQUIPMENT - RB211-524 ENGINE H2 HANDLING ATTACHMENT | 1 | |
| G71022-2 | RH Core Cowl Attachment Assy | 1 | |
| G71022-21 | ATTACHMENT ASSY | 1 | |
| G71022-21-WLDMT | ATTACHMENT WELDMENT | 1 | |
| G71022-3 | LH Core Cowl Attachment Assy | 1 | |
| G71022-45 | LH T/R ATTACHMENT | 4 | |
| G71022-46 | LH T/R ATTACHMENT | 4 | |
| G71022-48 | LH T/R ATTACHMENT | 1 | |
| G71022-49 | RH T/R ATTACHMENT | 1 | |
| G71022-6 | Fan Cowl Attachment Assy | 1 | |
| G71023-10 | R FAN COWL ATTACHMENT ASSY | 1 | |
| G71023-21 | L ATTACHMENT ASSY | 1 | |
| G71023-22 | R ATTACHMENT ASSY | 1 | |
| G71023-3 | L CORE COWL ATTACHMENT ASSY | 1 | |
| G71023-34 | ATTACHMENT TUBE | 1 | |
| G71023-4 | R CORE COWL ATTACHMENT ASSY | 1 | |
| G71023-5 | L T/R ATTACHMENT ASSY | 1 | |
| G71023-6 | R T/R ATTACHMENT ASSY | 1 | |
| G71023-9 | L FAN COWL ATTACHMENT ASSY | 1 | |
| GD-D1016-51PL-12 | PLUG, ATTACHMENT | 1 | |
| GFCO12A | CROWFOOT ATTACHMENT,SOCKET WRENC | 1 | |
| GFCO20A | CROWFOOT ATTACHMENT,SOCKET WRENC | 1 | |
| GSE56145 | TORQUE REACTOR PIN,BRAKE ROD/PISTON ATTACHMENT WING LANDING GEAR | 1 | |
| H201 | OIL DRAIN ATTACHMENT MGB | 4 | |
| H4749 | DRAIN ATTACHMENT | 2 | |
| H538A-3 | DRAIN ATTACHMENT, IGB AND TGB | 2 | |
| H538A-3 | DRAIN, ATTACHMENT | 2 | |
| HC130H0034-000 | Extractor - pylon front attachment bolts | 1 | |
| HC132H0033-000 | ATTACHMENT FRON | 1 | |
| HC132H0034-000 | ATTACHMENT REAR CABL | 5 | |
| HC132J0012-002 | LIFT, ATTACHMENT APU | 4 | |
| HC551B0086-000NDT | TEST PEICE-NO1 HINGE BRACKET (RIB3)ATTACHMENT BOLT | 1 | |
| HC551B0087-000NDT | TEST PEICE-NO2 HINGE BRKT (RIB6) ATTACHMENT BOLT | 1 | |
| HC711H1327-000 | STRIP-ATTACHMENT | 1 | |
| HCS2036-01-025 | GRINDER BARREL ATTACHMENT FOR SANDING DISK | 1 | |
| HJB 2.5 | FORKLIFT JIB ATTACHMENT (SWL 712-1288KG) | 1 | |
| HS8237 | PULLER ATTACHMENT | 1 | |
| HTB5M | BLADE,SCREWDRVIER ATTACHMENT | 1 | |
| HTS-3 | SCREWDRIVER ATTACHMENT,SOCKET WRENCH | 10 | |
| HTS34 | SCREWDRIVER ATTACHMENT,SOCKET WRENCH | 1 | |
| HU55060 | ENGINE BEAM SLING (MOUNT ATTACHMENT) | 1 | |
| HU55868-2 | ENGINE BEAM SLING (MOUNT ATTACHMENT) | 3 | |
| HU89025-5/10 | ATTACHMENT/LIFTING ADAPTOR | 1 | |
| IAE1P17027 | PUSH PULLER ATTACHMENT | 1 | |
| IAE1R18851 | ATTACHMENT, DRESSING | 1 | |
| INIU-111 | PDR BATON ATTACHMENT | 1 | |
| INIU-311 | GLASS BLASTER ATTACHMENT | 1 | |
| INIU-555 | PRO-MAX/MAX ATTACHMENT KIT | 1 | |
| ITS938933348 | DRILL ATTACHMENT SHORT 90 DEG | 1 | |
| ITS938934580 | DRILL ATTACHMENT 45 DEG ANGLE | 1 | |
| J20004-1 | SAFETY HARNESS ATTACHMENT EQUIPMENT | 5 | |
| J20005-1 | ATTACHMENT HARNESS UPPER WING B777 | 4 | |
| J21001-89 | ARM ASSY ATTACHMENT | 4 | |
| J46158 | POTENTIOMETER ATTACHMENT | 1 | |
| J55006-114 | TORQUE EQUIPMENT FOR VERTICAL FIN ATTACHMENT BOLTS | 7 | |
| J78002-73 | UPPER AFT THRUST REVERSER ATTACHMENT | 1 | |
| J78002-74 | UPPER FORWARD THRUST REVERSER ATTACHMENT | 1 | |
| J78004-90 | ATTACHMENT FITTING, SLING EQUIPMENT - GE90 FAN THRUST REVERSER HINGE, GE90 FAN T/R SLING (GE90-70/80/90 SERIES & -100 SERIES) 78004-90 REPLACES BOTH J78004-75 AND -76 FOR FUTURE PROCUREMENT. | 13 | |
| J78015-96 | ARM ATTACHMENT EQPT | 11 | |
| J78015-97 | ARM ATTACHMENT EQPT | 10 | |
| JAT14977A | JIFFY® Standard 90° Head Attachment - Production Grade - MADE IN THE USA! | 1 | |
| JAT14988A | JIFFY® 45° Head Attachment - Production Grade - MADE IN THE USA! | 1 | |
| JAT15000A | JIFFY® 360° Head Attachment - Production Grade - MADE IN THE USA! | 1 | |
| JAT16500A | JIFFY® ***LOW PROFILE*** 90° Head Attachment - Production Grade - MADE IN THE USA! | 1 | |
| JAT18107A | JIFFY® **HEAVY DUTY** 90° Head Attachment - Production Grade - MADE IN THE USA! | 1 | |
| K-3057 | CRANE HOOK ATTACHMENT KIT | 4 | |
| K10006-1 | Tether - Aft Fuselage, Vertical Fin Attachment | 1 | |
| K10006496 | ENGINE ROTATION ATTACHMENT | 1 | |
| K3057 | CRANE HOOK ATTACHMENT KIT | 4 | |
| KC46-110 | INTAKE COVERS, PW 4062 engine, Cold Weather Ops, w/ heater hose access vent & attachment detail (set of 2) | 1 | |
| KR-C-WC | WATER RAM STANDARD WITH TOILET ATTACHMENT | 1 | |
| LAGH 400 (1077600) | GREASE ATTACHMENT (GREASE LADLE) | 1 | |
| LST52724 | INDICATOR HOLE ATTACHMENT | 1 | |
| LST52743 | MAGNETICBASEWATTACHMENTSABCDEF | 1 | |
| LST52765 | INDICATOR ATTACHMENT | 1 | |
| LST52942 | HEIGHT GAGE ATTACHMENT | 1 | |
| M516G | LUMINANCE ATTACHMENT | 1 | |
| MACCWX | ATTACHMENT: COUNTER WEIGHT, | 2 | |
| MC-4A | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | 1 | |
| MC-4B | Modular Extension Nosecap for offset adapter - Modular Cap/Jaw Attachment Plate | 1 | |
| MIS2961-26-28 | PANCAKE ATTACHMENT | 1 | |
| MIS835 | 4" PANCAKE DRILL ATTACHMENT | 1 | |
| MIS90-010 | PANCAKE DRILL ATTACHMENT | 1 | |
| MIT69-72039 | HORIZONTAL STABILIZER ATTACHMENT REWORK TOOL KIT | 3 | |
| MQ8B-200 | BLADE TIE-DOWNS, adjustable strap attachments (set of 4) | 1 | |
| MT260-6 | TRDS RUN OUT ATTACHMENTS | 1 | |
| MTA7/16X1/2 | FTI Mandrel Threaded Attachment 7/16"to | 1 | |
| NB307100 | TYRE VALVE ATTACHMENT TYPE | 2 | |
| NDT6036 | UPPER WING SKIN AT THE ATTACHMENT FOR THE FRONT SPAR PITCH-LOAD FITTINGS | 2 | |
| NDT6036P1 | UPPER WING SKIN AT THE ATTACHMENT FOR THE FRONT SPAR PITCH-LOAD FITTINGS | 2 | |
| NDT6036P2 | UPPER WING SKIN AT THE ATTACHMENT FOR THE FRONT SPAR PITCH-LOAD FITTINGS | 2 | |
| OHME65B00115-2 | ATTACHMENT CABLE | 1 | |
| OM90 | "Economy" 90° Drilling Attachment - Light Duty | 1 | |
| OUT131 | ATTACHMENT TOOL | 4 | |
| OUT135 | ATTACHMENT TOOL | 3 | |
| Olympus Mini Wheel Encoder (2.5m with D15 Connector) | Olympus Mini Wheel Encoder (2.5m with D15 Connector) - Bracket kit, Allen key screwdriver for bracket attachment, Carry case | 1 | |
| PR-520 | LIGHT PHOTOMETER - HANDHELD. SYSTEM INCLUDES PR524 LITEMATE-4 (ILLUMINANCE METER), PR-522 SPOTMATE OPTICS ATTACHMENT ( (PHOTO RESEARCH INC.) | 1 | |
| PRE65B00002-3 | Attachment Assy | 1 | |
| PRE65B00002-4 | Attachment Assy | 1 | |
| PTT16975 | SHORT L TYPE DRILL ATTACHMENT | 1 | |
| PWA56688 | SPANNER ATTACHMENT | 1 | |
| PWA57903 | PULLER ATTACHMENT,MECHANICAL | 1 | |
| PWA71772 | ANGLE ATTACHMENT, RI | 1 | |
| PWC63288-13 | Support Attachment PW305&PW306 | 1 | |
| PWC63288-33 | Support Attachment PW307 | 1 | |
| PWC70505 | Attachment pin | 1 | |
| R44-000 | BUBBLE COVER, strap attachment type | 1 | |
| R47530 | ATTACHMENT PLATE | 1 | |
| R47859 | ATTACHMENT PLATE | 1 | |
| R66-515 | BLADE TIE-DOWNS, (semi-rigid) w/telescoping attachment handle (set of 3) | 1 | |
| RB 92700-10750-103 | MAIN GEAR BOX ATTACHMENT BOLT WRENCH | 2 | |
| RB AN8515-1 | SPANNER ATTACHMENT | 2 | |
| RB OTC1124 | Pulling Attachment | 1 | |
| RB OTC1151 | Pulling Attachment | 1 | |
| RB072610-H-A | AS350 / AS355 & EC120 SKIDTUBE ATTACHMENT | 2 | |
| RB072610-H-B | BELL 206L,407 SKIDTUBE ATTACHMENT | 2 | |
| RB072610-H-D | BELL 47, HILLER 12 SKIDTUBE ATTACHMENT | 2 | |
| RBAN8515-1 | WRENCH ATTACHMENT SET | 2 | |
| RBW5305G00131-3G | Tail Boom Lifting Sling & Attachment | 2 | |
| RBW6220G01931-8G | M/R DAMPER ATTACHMENT BOLT REMOVAL TOOL | 2 | |
| RBW6405G02131-3G | Tail Rotor Blade Damper Attachment Bushing Removal | 2 | |
| RCA0AC2SPF | COVER: SENSOR,ANGLE OF ATTACK, SPECIAL FLAG ATTACHMENT | 2 | |
| RGA01 | RIVET GUN ATTACHMENT | 1 | |
| RRT104997 | ATTACHMENT BRKT | 1 | |
| S58B6 | TAG - ATTACHMENT | 1 | |
| SA12E | SCREWDRIVER ATTACHMENT, 1/2" DRIVE, 3/8" | 1 | |
| SA14E | SCREWDRIVER ATTACHMENT,SOCKET WRENCH | 1 | |
| SA18E | SCREWDRIVER ATTACHMENT,SOCKET WRENCH | 1 | |
| SA24E | SCREWDRIVER ATTACHMENT,SOCKET WRENCH | 1 | |
| SB53-6026 | TOOL-NLGUPPER ATTACHMENT FITTING | 1 | |
| SG 350A98-0001-00 | FIN ATTACHMENT TIGHTENING WRENCH, VERTICAL STABILIZER | 1 | |
| SP75994 | 45DEG ATTACHMENT 1/4-28 | 1 | |
| SP76006 | LD RA ATTACHMENT 1/4-28 | 1 | |
| SPRAYKITDINITR0L | SPRAY KIT GUN + ATTACHMENTS | 1 | |
| ST20706A-4 | THREADED BUSHING DRILL GUIDE-VACUUM ATTACHMENT | 1 | |
| ST93966 | Socket Wrench Attachment | 1 | |
| STD-13877 | INDUSTRIAL VACUUM CLEANER - HIGH SUCTION PRESSURE AND AIRFLOWEQUIVALENT, EXPLOSION AND ANTI-STATIC PROOF, WITH CREVICE ATTACHMENTS | 2 | |
| STD-170 | C-CLAMP - NLG PRELOAD TEST SPRING SCALE ATTACHMENT | 1 | |
| STN35029-562 | CROWFOOT ATTACHMENT 3/8IN DRIV | 1 | |
| STN350293250 | CROWFOOT ATTACHMENT 1/2IN DRIV | 1 | |
| T-03810418 | CUTTING ATTACHMENT (CA1350) | 1 | |
| T-236977 | Gage, indicator attachment | 1 | |
| T21 | OFFSET DRILL ATTACHMENT | 3 | |
| TEK-5086 | UPPER WING SKIN AT THE ATTACHMENT FOR THE FRONT SPAR PITCH-LOAD FITTINGS | 1 | |
| TER-3 | 90° Drilling Attachment - Heavy Duty - MADE IN USA! | 1 | |
| TER-34 | 360° Drilling Attachment - General Duty - MADE IN USA! | 1 | |
| TGUA009 | Bowers TGUA009 Universal Mounting Attachment (Pair) | 1 | |
| TMP22A | SCREWDRIVER ATTACHMENT,SOCKET WRENCH: | 1 | |
| TMP22E | SCREWDRIVER ATTACHMENT,SOCKET WRENCH: | 3 | |
| TP360 | “L” TYPE OFFSET E DRILL ATTACHMENT (OFFSET DRILLING (PANCAKE)) | 2 | |
| TP362 | “L” TYPE OFFSET E DRILL ATTACHMENT (OFFSET DRILLING (PANCAKE)) | 1 | |
| TS | TOOL SET WING ATTACHMENT (TS 5-1) | 2 | |
| TS 5-1 | Tool Set Wing Attachment (TS 5-1) | 1 | |
| TY-CON1 | TOWBAR ATTACHMENT HEAD (OPTIONAL) | 2 | |
| UH60-406 | BLADE COVERS w/ tie down attachment (set of 4) | 1 | |
| UT8891 | LOW PROFILE DRILL ATTACHMENT | 1 | |
| UT8891-5 | AIRCRAFT ANGLE DRILL WITH LOW PROFILE DRILL ATTACHMENT | 0.45 HP | 500 RPM | 1/4" X 20 TPI CHUCK | REAR EXHAUST | 1 | |
| VPP-LFI | VPP-LFI;ATTachment - LFI Head - for VP-60 and FP-80 | 1 | |
| W-200/0505 | Bowers W-200/0505 Granite Platform TA610 with 'L' Attachment for TR200 | 1 | |
| WCI-CBM-18-0-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-18-1-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-18-2-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-18-3-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-20-0-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-20-1-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-20-2-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-20-3-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-22-0-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-22-1-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-22-2-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-22-3-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-24-0-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-24-1-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-24-2-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-24-3-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-26-0-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-26-1-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-26-2-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-28-0-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-28-1-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-28-2-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-28-3-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-30-0-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-30-1-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-30-2-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-30-3-N-2-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-32-0-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-32-1-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-32-2-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-32-3-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-36-0-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-36-1-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-36-2-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-36-3-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-38-0-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-38-1-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-38-2-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-38-3-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-40-1-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-40-2-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-40-3-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-44-0-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-44-1-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-44-2-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-44-3-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-48-0-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-48-1-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-48-2-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-48-3-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-52-0-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-52-1-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-52-2-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-52-3-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-56-0-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-56-1-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-56-2-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WCI-CBM-56-3-N-*-XX | Mandrel (*=Attachment Callout; XX=Stackup Thickness) | 1 | |
| WINDHEATER | HEATER ATTACHMENT FOR WIND300 | 1 | |
| WTHTOOLPOUCH | TOOL POUCH W/ATTACHMENT POINTS | 1 | |
| WY3502 | TOWBAR ATTACHMENT HEAD | 1 | |
| XA-455S | UPPER WING SKIN AT THE ATTACHMENT FOR THE FRONT SPAR PITCH-LOAD FITTINGS | 1 | |
| ZT727-C | FLAT OFFSET ANGLE DRILL ATTACHMENT | 1 | |
| ZT727-C 1 | FLAT OFFSET ANGLE DRILL ATTACHMENT | 1 | |
| ZT728-C | FLAT OFFSET ANGLE DRILL ATTACHMENT | 1 | |
| ZT728-C 1 | FLAT OFFSET ANGLE DRILL ATTACHMENT | 1 | |
| ZT729-C | FLAT OFFSET ANGLE DRILL ATTACHMENT | 1 | |
| ZT729-C 1 | FLAT OFFSET ANGLE DRILL ATTACHMENT | 1 | |
| 98A27504008000 | EXTRACTOR,ATTACHMENT PIN,FORWARD FLAP,US | 6 | |
| 98A27504019000 | BULLET FLAP FORWARD ATTACHMENT PIN,USE A | 8 | |
| 98F55308395000 | ATTACHMENT BOLT EXTRACTOR,VERTICAL STABI | 8 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
