| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PARTS RACK | Aluminum | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 00106-086-001 | ALUMINUM JACK RUDDER | 1 | |
| 001671-CE | New WC270G-Insert Potable Water unit (CE and/or 50Hz input). Includes hose & couplers required to service aircraft. 270-gallons capacity stainless steel tank in insulated aluminum enclosure, Honda GX160 electric start gas engine mated to Teel centrifugal | 1 | |
| 01-1186-0000 | TRONAIR ATA-9 Custom Aircraft Towbar, 141 in L, 22-7/8 in W, 7-1/2 in H, Aluminum | 4 | |
| 01-1215-0000 | TRONAIR ATA-9 Portable Lightweight Aircraft Towbar, 3-1/2 in Dia, Aluminum, Blue | 7 | |
| 01-1216-0000 | TRONAIR ATA-9 Portable Lightweight Aircraft Towbar, 3-1/2 in Dia, Aluminum, Blue | 10 | |
| 01-1229-0011 | TRONAIR ATA-9 Custom Aircraft Towbar, 146 in L, 29-5/16 in W, 20-11/16 in H, Aluminum | 4 | |
| 01-1242-0000 | TRONAIR ATA-9 Custom Aircraft Towbar, 290 in L, Aluminum, Powder-Coated, Blue | 1 | |
| 01-1272-0000 | TRONAIR ATA-9 Custom Aircraft Towbar, 178 in L, 21-7/8 in W, 7-3/4 in H, Aluminum | 3 | |
| 019 | BOEING REFERENCE STANDARD 7075-T6 ALUMINUM 7075 57-10-07 PART 6 PG.216. | 1 | |
| 01A1290-0100 | TRONAIR ATA-9 Heavy-Duty Multi-Head Towbar, 128 in L, 24 in W, 22-1/8 in H, Aluminum | 3 | |
| 02-208-F | Inner-Outer Reamers (Material: Aluminum & Soft Materials) (Capacity: 3/16" to 1-1/2" O.D.) (Add to cart: Add To Cart) | 1 | |
| 02-208-FSS | Inner-Outer Reamers (Material: Aluminum & Soft Materials) (Capacity: 3/16" to 1-1/2" O.D.) (Add to cart: Add To Cart) (Material: Stainless Steel, Copper, Brass) (Capacity: 3/16" to 1-1/2" O.D.) (Add to cart: Add To Cart) | 1 | |
| 02-304-3/32 | 100 H.S.S DEGREES – FOR ALUMINUM | 1 | |
| 02-9097 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) | 1 | |
| 02-9098 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) | 1 | |
| 02-9101 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (Fo | 1 | |
| 02-9279 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (Fo | 1 | |
| 02-9280 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (Fo | 1 | |
| 02-9914 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (Fo | 1 | |
| 02-9915 | Replacement Feed & Roll Cutters (Rivet capacity aluminum: Feed Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (For tool: 7LR to 8PR) (Add to cart: Add To Cart) (Rivet capacity aluminum: Roll Cutters) (Fo | 1 | |
| 038 | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 1 FIGURE 8 SHEET 7 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.71 | 1 | |
| 039 | BOEING 707 REFERENCE STANDARD 2024-T3 ALUMINUM DETAIL 3 FIGURE 8 SHEET 9 BBL 70.5 SPLICE 707-300/400..PART 6, 57-30-07 PG.73 | 1 | |
| 04-507-FB | Rol-Air 37° Flaring Tool (Motor: Soft Copper, Aluminum & Brass) (Materials: 3/16", 1/4", 5/16", 3/8", 1/2") (Sizes: 2.5 lbs (1.1 kgs)) (Add to cart: Add To Cart) | 1 | |
| 04-E-100 | Multi-Burr Replacement Blades (For use on cables: Steel & Aluminum) (Add to cart: Add To Cart) | 1 | |
| 04-E-101 | Multi-Burr Replacement Blades (For use on cables: Steel & Aluminum) (Add to cart: Add To Cart) (For use on cables: Small Holes In Steel & Alum.) (Add to cart: Add To Cart) | 1 | |
| 04-E-102 | Multi-Burr Replacement Blades (For use on cables: Steel & Aluminum) (Add to cart: Add To Cart) (For use on cables: Small Holes In Steel & Alum.) (Add to cart: Add To Cart) (For use on cables: Small Holes In Brass & Cast Ir) (Add to cart: Add To Cart) | 1 | |
| 04-E-200 | Multi-Burr Replacement Blades (For use on cables: Steel & Aluminum) (Add to cart: Add To Cart) (For use on cables: Small Holes In Steel & Alum.) (Add to cart: Add To Cart) (For use on cables: Small Holes In Brass & Cast Ir) (Add to cart: Add To Cart) (For | 1 | |
| 04-E-350 | Multi-Burr Replacement Blades (For use on cables: Steel & Aluminum) (Add to cart: Add To Cart) (For use on cables: Small Holes In Steel & Alum.) (Add to cart: Add To Cart) (For use on cables: Small Holes In Brass & Cast Ir) (Add to cart: Add To Cart) (For | 1 | |
| 04-J1251 | Quick-Snip Hand Nibbler (Capacity (pipe or round stock): 18 Gauge) (Capacity aluminum: 15 Gauge) (Add to cart: Add To Cart) | 1 | |
| 04-J1351 | Monodex Hand Nibbler (Capacity (pipe or round stock): 17 Gauge) (Capacity aluminum: 15 Gauge) (Add to cart: Add To Cart) | 1 | |
| 051138-95072 | ALUMINUM TAPE 2 INCHES | 1 | |
| 06-134724-000 | HIGH POWER ALLIGATOR YOKE RIVETERS ( REACH: 1-1/2" )( MAXIMUM FORCE @ 90 PSI: 9000 LBS )( CAPACITY (ALUMINUM - STEEL): 1/4" ALUM - 3/16" STEEL )( CLOSED YOKE HEIGHT: 7/8" )( OVERALL LENGTH-WEIGHT: 17-1/2" (44.4CM)-8LBS (3.6KGS) ) | 3 | |
| 07-915A-1 | No-Mar Flush Sets (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .401") (Add to cart: Add To Cart) | 1 | |
| 07-915A-2 | No-Mar Flush Sets (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .401") (Add to cart: Add To Cart) (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .498") (Add to cart: Add To Cart) | 1 | |
| 07-915B-1 | No-Mar Flush Sets (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .401") (Add to cart: Add To Cart) (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .498") (Add to cart: Add To Cart) (Face diameter: 1" (2 | 1 | |
| 07-915B-2 | No-Mar Flush Sets (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .401") (Add to cart: Add To Cart) (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .498") (Add to cart: Add To Cart) (Face diameter: 1" (2 | 1 | |
| 07-915P-1 | No-Mar Flush Sets (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .401") (Add to cart: Add To Cart) (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .498") (Add to cart: Add To Cart) (Face diameter: 1" (2 | 1 | |
| 07-915P-2 | No-Mar Flush Sets (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .401") (Add to cart: Add To Cart) (Face diameter: 1" (25 mm) Aluminum) (Overall length: 3" (76 mm)) (Shank: .498") (Add to cart: Add To Cart) (Face diameter: 1" (2 | 1 | |
| 100514-26 | LADDER 4' ALUMINUM | 1 | |
| 109-3101-58-2 | HAMMER,ALUMINUM | 3 | |
| 10COWLPYLON737MAX | 10' ALUMINUM COWL PYLON LADDER FOR BOEING 737MAX | 1 | |
| 10LF200-32 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) | 1 | |
| 10LF200-36 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 1 | |
| 10LF201-32 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 1 | |
| 10LF201-36 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 2 | |
| 10LF201-36-G | DOTCO® RIGHT ANGLE DISC SANDERS (CAPACITY: 3") (EXHAUST TYPE: FRONT) (RPM: 12,000) (TYPE: ALUMINUM HOUSING - 1/4"-28 INT. THREAD) (ADD TO CART: ADD TO CART) (CAPACITY: 3") (EXHAUST TYPE: FRONT) (RPM: 12,000) (TYPE: ALUMINUM HOUSING - 1/4" COLLET) (ADD TO | 1 | |
| 10LF280-36 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 1 | |
| 10LF281-36 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 1 | |
| 10RS-52-2-MLG-FTG-AF | MD-10 REFERENCE STANDARD FIGURE 1.3, SHEET 1&2. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.51-MLG-FTG-FF | MD-10 REFERENCE STANDARD FIGURE 1.1, SHEET 1&2. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.52-1-MLG-FTG-AF | MD-10 REFERENCE STANDARD FIGURE 1.2, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-1-MLG-FTG-CC-UPR | MD-10 REFERENCE STANDARD FIGURE 1.4, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-2-MLG-FTG-AA | MD-10 REFERENCE STANDARD FIGURE 1.5, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 10RS.53-3-MLG-FTG-DD | MD-10 REFERENCE STANDARD FIGURE 1.6, SHEET 1&2. MATERIAL: 7075 ALUMINUM. INCLUDES 10RS.53-1 MLGF BUSHG and HLDR. Includes Test Report and Certificate of Conformance. MDC-99K1082 | 1 | |
| 11-6027A001 | PILOT VALVE ASSY WITH ALUMINUM AIR CHECK | 1 | |
| 114-283 | Bullet tool for installation of aluminum pistons | 1 | |
| 114T0235-6 | FLAP AERO RAIL ALUMINUM CALCO | 1 | |
| 126 | ALUMINUM REFERENCE STANDARD | 7 | |
| 126-2024T3 | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, DETAIL IV, 2024-T3 Aluminum | 1 | |
| 126-7075T6 | Boeing Standard,747 PT6 51-00-00 PG10: FIG23, DETAIL IV, 7075-T6 Aluminum | 1 | |
| 127 - 0.100 | ALUMINUM SKIN CORROSION LOSS INSPECTION (IMPEDANCE PLANE DISPLAY) | 1 | |
| 127 - 0_100 | ALUMINUM SKIN CORROSION LOSS INSPECTION (IMPEDANCE PLANE DISPLAY) | 1 | |
| 128 | BOEING REFERENCE STANDARD 767 PT 6 51-00-06 PAGE 4 FIGURE 1, MATERIAL: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 1 | |
| 12169 | AIR CAPITAL ALUMINUM BODY AIR VAC (HEAVY DUTY) | 4 | |
| 12LF200-32 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 1 | |
| 12LF200-36 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 1 | |
| 12LF201-32 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 1 | |
| 12LF201-36 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 2 | |
| 12LF280-36 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 3 | |
| 12LF281-36 | Dotco® Right Angle Disc Sanders (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4"-28 Int. Thread) (Add to cart: Add To Cart) (Capacity: 3") (Exhaust type: Front) (Rpm: 12,000) (Type: Aluminum Housing - 1/4" Collet) (Add to | 6 | |
| 130C | BOEING REFERENCE STANDARD Part 6 53-50-00 Page 13 Figure 1. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 13502-TH | 10 HD PIPE WRENCH ALUMINUM TH | 1 | |
| 13506-TH | 14 HD PIPE WRENCH ALUMINUM TH | 1 | |
| 14-1330 | End Cut Replacement Cutters (Type: H.S.S.) (Style: Inverted Cone) (Used for: Aluminum Welds) (Diameter-shank: 3/4" - 1/4") (Overall length: 1-7/8" (48 mm)) (Add to cart: Add To Cart) | 1 | |
| 14-1332 | End Cut Replacement Cutters (Type: H.S.S.) (Style: Inverted Cone) (Used for: Aluminum Welds) (Diameter-shank: 3/4" - 1/4") (Overall length: 1-7/8" (48 mm)) (Add to cart: Add To Cart) (Type: Carbide) (Style: Cylindrical) (Used for: Shaving Welds) (Diameter | 1 | |
| 14-1732 | End Cut Replacement Cutters (Type: H.S.S.) (Style: Inverted Cone) (Used for: Aluminum Welds) (Diameter-shank: 3/4" - 1/4") (Overall length: 1-7/8" (48 mm)) (Add to cart: Add To Cart) (Type: Carbide) (Style: Cylindrical) (Used for: Shaving Welds) (Diameter | 1 | |
| 141A8147U | ALUMINUM SPLICE ANGLE | 1 | |
| 145-44130-401 | TORQUE BOX, NDI - WING ASSEMBLY - ALUMINUM 7050-T7451 | 3 | |
| 145-44131-001 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 6 | |
| 15-1780 | MINI AIR VAC-ALUMINUM W/ 18" FLEX HOSE | 1 | |
| 155CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) | 1 | |
| 16A11039-1 | PARTS KIT REFERENCE SKINS ALUMINUM | 1 | |
| 17-1XSP | USATCO RIVET GUNS ( BLOWS PER MINUTE: 3600 )( CAPACITY (ALUMINUM - STEEL): 1/8" ALUMINUM )( OVERALL LENGTH: 5-11/16" (145 MM) )( TYPE: STANDARD .401 SHANK ) | 1 | |
| 17-200B | USATCO RIVET GUNS ( BLOWS PER MINUTE: 2700 )( CAPACITY (ALUMINUM - STEEL): 3/16" - 5/32" )( OVERALL LENGTH: 4-1/4" (108 MM) )( TYPE: JIFFY TYPE .401 SHANK ) | 4 | |
| 17-3XSP | USATCO RIVET GUNS ( BLOWS PER MINUTE: 2160 )( CAPACITY (ALUMINUM - STEEL): 3/16" - 5/32" )( OVERALL LENGTH: 7-5/16" (186 MM) )( TYPE: STANDARD .401 SHANK ) | 1 | |
| 17-4XSP | USATCO RIVET GUNS ( BLOWS PER MINUTE: 1740 )( CAPACITY (ALUMINUM - STEEL): 1/4" - 3/16" )( OVERALL LENGTH: 8-5/16" (211 MM) )( TYPE: STANDARD .401 SHANK ) | 2 | |
| 170-210 | WING COVERS (aluminum type), WINTER USE (set of 2) | 1 | |
| 170-215 | WING COVERS (aluminum type), ALL YEAR USE (set of 2) | 1 | |
| 171-00844-601 16E1 | EMBRAER REFERENCE STANDARD 7075-T7 ALUMINUM.Includes Test Report and Certificate of Conformance. | 1 | |
| 17P9M2007 | Douglas Reference Standard Assembly For the Ultrasonic Calibration of Upper Wing Skin to common Stringer, Figure24-4 sheets 253. Material: 7075 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| 1824 | Heavy-Duty Bending Brakes (Capacity (aluminum): 18 ga.) (Maximum bend length (unlimited): 24") (Maximum clearance: 4") (Minimum reverse bend: 5/8") (Shipping weight: 50 lbs (23 kgs)) (Add to cart: Add To Cart) | 1 | |
| 1824S | Heavy-Duty Bending Brakes (Capacity (aluminum): 18 ga.) (Maximum bend length (unlimited): 24") (Maximum clearance: 4") (Minimum reverse bend: 5/8") (Shipping weight: 50 lbs (23 kgs)) (Add to cart: Add To Cart) (Capacity (aluminum): FLOOR STAND) (Maximum b | 1 | |
| 1837A | ALUMINUM CENTRIFUGE STAND. | 3 | |
| 1840 | HEAVY-DUTY BENDING BRAKES CAPACITY ALUMINUM: 1 | 1 | |
| 1840S | Heavy-Duty Bending Brakes (Capacity (aluminum): 18 ga.) (Maximum bend length (unlimited): 24") (Maximum clearance: 4") (Minimum reverse bend: 5/8") (Shipping weight: 50 lbs (23 kgs)) (Add to cart: Add To Cart) (Capacity (aluminum): FLOOR STAND) (Maximum b | 1 | |
| 188A-2024T3 | Boeing Standard,737 PT6 51-00-00:PG12 FIG4 DETAIL VI, 2024-T3 Aluminum | 1 | |
| 18B | Economy Bending Brakes (Capacity (steel-aluminum): 16 ga.) (Maximum bend length: 18") (Shipping weight: 3.5 lbs (1.6 kgs)) (Add to cart: Contact us to order) | 1 | |
| 1920166 (NRK-3AL) | REFERENCE STANDARD ALUMINUM 7075 | 1 | |
| 194 | TB125 aluminum towbar with linear shear protection and limited towe | 9 | |
| 1TD1133D07001-2001 | Seyer Industries reference standard. Material: 2024-T351 Aluminum...Chamfer EDM Notch Size: .030" x .030" x .005" +/- .002"...Bore EDM Notch Size: .030" x .030" x .005" +/- .002". Includes Test Report and Certificate of Conformance. Part Serial Number:... | 1 | |
| 2-164-551 | AIRBUS CALIBRATION STANDARD, A350-A-51-90-01-01001-040A-A-NDT & 51-63-01-991-001-A PT 6 FIG 601, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance. | 2 | |
| 2-887-01-9313S | SPLITTED CONICAL CALIBRATION STANDARD IN 2024-T351 ALUMINUM TYPE SCCS3-7, A318 51-63-07. Includes Test Report and Certificate of Conformance. | 6 | |
| 2-887-01-9314S | SPLITTED CONICAL CALIBRATION STANDARD IN 2024-T251 ALUMINUM ..TYPE SCCS7-14, A318 51-63-07. Includes Test Report and Certificate of Conformance. | 5 | |
| 2-887-01-9315S | SPLITTED CONICAL CALIBRATION STANDARD IN 2024-T351 ALUMINUM ..TYPE SCCS14-21 , A318 51-63-06-PB1. Includes Test Report and Certificate of Conformance. | 4 | |
| 2-887-01-9316S | SPLITTED CONICAL CALIBRATION STANDARD IN 2024-T351 ALUMINUM ..TYPE SCCS21-28, A318 51-63-07. Includes Test Report and Certificate of Conformance. | 3 | |
| 2. 5 STEP BLOCK | FOR THICKNESS AND LINEARITY CALIBRATION OF THIN MATERIALS- 7075- T6 ALUMINUM, BLACK ANODIZED. | 1 | |
| 20-90424 | Keyless Impact Chucks (Capacity (aluminum steel): 3/32" to 3/8") (Square drive mount: 3/8") (Overall length (open): 2-3/32" (53 mm)) (Add to cart: Add To Cart) | 1 | |
| 20-90430 | Keyless Impact Chucks (Capacity (aluminum steel): 3/32" to 3/8") (Square drive mount: 3/8") (Overall length (open): 2-3/32" (53 mm)) (Add to cart: Add To Cart) (Capacity (aluminum steel): 1/8" to 1/2") (Square drive mount: 1/2") (Overall length (open): 2- | 1 | |
| 206 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD14)Includes Test Report and Certificate of Conformance. | 3 | |
| 208 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 19. MATERIAL 2024 ALUMINUM (FASTENERS: BACB30PT5-10, BACN10TN5)Includes Test Report and Certificate of Conformance. | 1 | |
| 239 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | 1 | |
| 240 | BOEING REFERENCE STANDARD 727 PT 6 57-10-27 FIG 18. MATERIAL 2024 ALUMINUM (FASTENERS: BACR15DG10DD)Includes Test Report and Certificate of Conformance. | 1 | |
| 312 | BOEING REFERENCE STANDARD 737 PART 6 53-10-17 PAGE 6 FIGURE 2. 2024-T3 ALUMINUM Includes Test Report and Certificate of Conformance. | 7 | |
| 425 | ALUMINUM TAPE | 14 | |
| 437 | BOEING REFERENCE STANDARD 747 53-10-01 PART 4 PAGE 11 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 438 | BOEING REFERENCE STANDARD 747 53-10-01 PART 4 PAGE 11 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 475 | BOEING 747 REFERENCE STANDARD PART 6 57-10-27 FIGURE 1 PAGE 4. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 5 | |
| 794 | TOWBAR, AIRPLANE - FLYAWAY TYPE - NO RUNNING GEAR - LIGHT WEIGHT ALUMINUM AVAILABLE WITH HEADS FOR 707/720, 737, OR 737 | 1 | |
| 4029 | BOEING REFERENCE STANDARD 747 PART 4 55-50-01 FIGURE 1 PAGE 4.MATERIAL: 2024-T3 or 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 4072 | BOEING REFERENCE STANDARD 747 PT 6 53-30-05. Material 2024-T3 Aluminum. Fasteners BACR15CE5D5, BACR15CE6D5. Includes Test Report and Certificate of Conformance. | 1 | |
| 7374 | EDDY CURRENT BOLT HOLE STANDARD BLOCK (7075-T6 ALUMINUM) | 1 | |
| 39313 | Marson 39313 Aluminum Thread Sert Tool Kit | 4 | |
| 70440 | Automatic Center Punches (Type: Steel) (Overall length: 5" (127 mm)) (Add to cart: Add To Cart) (Type: Aluminum) (Overall length: 5" (127 mm)) (Add to cart: Add To Cart) | 1 | |
| 234982 | PPG Semco 234982 Model 850 Aluminum Bezel for 32 oz. Retainer | 1 | |
| 235502 | CASA CN-235 EDDY CURRENT REFERENCE STANDARD PART 5 57-10-05 PAGE 510 FIGURE 504b. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 271069 | 4' Aluminum Lamps For Working | 1 | |
| 280403 | ALUMINUM DRIFT | 1 | |
| 280404 | ALUMINUM DRIFT | 1 | |
| 280405 | ALUMINUM DRIFT | 1 | |
| 400504 | ALUMINUM DRIFT | 1 | |
| 500061 | ALUMINUM DRIFT | 1 | |
| 1902510 | TB-S1 ALUMINUM CRACK | 1 | |
| 1920166 | OLYMPUS REFERENCE STANDARD ALUMINUM 7075-T651 / 7075-T73 | 1 | |
| 2000042 | TB1 aluminum towbar with shock-absorbing hitch and limited tow-eye rotation. 60,000 lb. (27,215 kg) capacity. Compatible with all AERO heads (EXCEPT Regional-3R, G500 & Global Express Heads). Also compatible with Tronair and other manufacturer's systems. | 2 | |
| 2000099 | TB125 aluminum towbar with linear shear protection and limited tow-eye rotation. 125,000 lb. (56,699 kg) capacity. Compatible with all AERO heads (requires Reducer for 3" diameter heads). Also compatible with Tronair and other manufacturer's systems.TB1 | 1 | |
| 2000160 | TB125-15 Split (15-foot) aluminum towbar with linear shear protection and limited tow-eye rotation. NOTE: Designed for towing applications requiring more tug-aircraft clearance (such as for Falcon aircraft), this towbar is a two-piece bar consisting of | 1 | |
| 2000468 | G200 towbar head for Gulfstream G150/G200/G250/G280/Galaxy/Dornier 328/Envoy 3. 60" aluminum extension tube with head attachment. Extension allows sufficient clearance under nose of aircraft to use with standard length towbar, eliminating the need for a | 1 | |
| 2000605 | TB125-5 aluminum towbar. Special 5' Length allows maximum use of entire hangar space- even in tight corners. Features include linear shear protection and limited tow-eye rotation. 125,000 lb. capacity. Compatible with all AERO heads (requires Reducer for | 1 | |
| 2000DD10980-1 | Aluminum CAL Standard, United Airlines Drawing No. 2000DD10980 REV D | 1 | |
| 2001028 | WC80-RJ1 Potable Water Service Cart. Includes all hoses & couplers for servicing aircraft. 80-gallon capacity, 12V pump (4.5gpm @ 40psi) with onboard charging system, corrosion proof stainless steel winterized tanks and insulated aluminum enclosure on he | 1 | |
| 2001029 | WC180-RJ2E Potable Water Service Cart. Includes hose & couplers required for servicing aircraft. 12-volt electric pump kit with onboard charging system, 180 gallon capacity corrosion proof stainless steel winterized tanks and insulated aluminum enclosure | 1 | |
| 2001032 | WC270-RJ3E Potable Water Service Cart. Includes hose & couplers required to service aircraft. 12v electric pump kit with onboard charging system, 270 gallon corrosion proof stainless steel winterized tanks and insulated aluminum enclosure on heavy-duty g | 1 | |
| 2001033 | WC270-RJ3-G Low Profile Potable Water Service Cart. Honda GX160 electric start engine mated to Teel centrifugal pump (31gpm @ 25psi; 29psi max), 270 gallon corrosion proof stainless steel winterized tanks and insulated aluminum enclosure on heavy-duty g | 1 | |
| 2001034 | WC270E-Insert Potable Water unit. Includes hose & couplers required to service aircraft. 270-gallons capacity stainless steel tank in insulated aluminum enclosure, 12-volt electric pump system (7-8 GPM @ 50-80 PSI) and charger, winterization. To be moun | 1 | |
| 2001035 | New WC270G-Insert Potable Water unit. Includes hose & couplers required to service aircraft. 270-gallons capacity stainless steel tank in insulated aluminum enclosure, Honda GX160 electric start gas engine mated to Teel centrifugal pump (31gpm @ 25psi; 2 | 1 | |
| 2001036 | WC450G-Insert Potable Water unit. Includes hose & couplers required to service aircraft. 450-gallons capacity stainless steel tank in insulated aluminum enclosure, Honda GX160 electric start gas engine mated to Teel centrifugal pump (31gpm @ 25psi; 29psi | 1 | |
| 2001063 | Narrowbody FLY-AWAY Towbar, folding aluminum bar- without wheels. Bar available equipped with 727, 737, 757, A300/310, or A319/A320 towbar head. | 1 | |
| 2001071 | B727 & A300/310 Aluminum Towbar. Handles Boeing 727 and Airbus A300/310 airframes (also fits American Airlines 757 A /C.) | 1 | |
| 2001075 | B737/ 100-900 & BBJ Aluminum Towbar | 1 | |
| 2001375 | Towbar for Apache-Blackhawk Helicopters: Light weight aluminum folding towbar designed for everyday ramp use that can be quickly folded for easy transportation and "fly-away" applications. | 1 | |
| 2001376 | Helicopter towbar for SH-60B, F Seahawk, HH-60H, J Jayhawk and Sikorsky S70B series with dual tail wheels:Specifications: 3 piece aluminum towbar (2 piece towbar and detachable head). Assembled overall length is approximately 24 ft., allowing turning clea | 1 | |
| 2001378 | Helicopter towbar for Dauphin AS-365, EC-155 and Coast Guard HH-65 and MH-65 helicopters.*MUST SPECIFY WHICH MODEL HELICOPTER THIS TOWBAR WILL BE FOR**This is a light weight carry along tow bar.Specifications: 3 piece aluminum construction designed to NSN | 1 | |
| 2001535 | TB1 flyaway, portable aluminum towbar with shock-absorbing hitch and limited tow-eye rotation. Bar consists of (2) 5 foot sections with retaining sleeve and additional ball lock pin for use in assembling bar when put into service. 60,000 lbs. (27,215 k | 1 | |
| 2001561 | TB125-10 flyaway, portable aluminum towbar with shock-absorbing hitch and limited tow-eye rotation. Bar consists of (2) 5 foot sections with retaining sleeve and additional ball lock pins for use in assembling bar when put into service. 125,000 lbs. (5 | 1 | |
| 2001664 | Helicopter towbar Head for multi-head towbar SH-60B, F Seahawk and HH-60H,J Jayhawk, and Sikorsky S70B series with dual tail wheelsThe Model HT-60SH is an aluminum tow bar designed for everyday ramp use and can be broken down into three pieces for easy t | 1 | |
| 2001995 | TB125-15 (15-foot) aluminum towbar with linear shear protection and limited tow-eye rotation. NOTE: Designed for towing applications requiring more tug-aircraft clearance (such as for Falcon aircraft), this towbar is a one piece bar. It has the same 125 | 1 | |
| 2002460 | New WC270E-Insert CE VERSION Potable Water unit. Includes hose & couplers required to service aircraft. 270-gallons capacity stainless steel tank in insulated aluminum enclosure, 12-volt electric pump system (8gpm @ 40psi) and charger, winterization. To | 1 | |
| 1728317148 | HIGH POWER ALLIGATOR YOKE RIVETERS ( REACH: 1-1/2" )( MAXIMUM FORCE @ 90 PSI: 9000 LBS )( CAPACITY (ALUMINUM - STEEL): 1/4" ALUM - 3/16" STEEL )( CLOSED YOKE HEIGHT: 7/8" )( OVERALL LENGTH-WEIGHT: 17-1/2" (44.4CM)-8LBS (3.6KGS) ) | 1 | |
| 200470-1 | STOWABLE TOWBAR FOR FLYAWAY USE. ALUMINUM CONSTRUCTION; 8.25 FT. LONG; WEIGHT 65# FOOT PADS FOR SHIPPING - NO RUNNING GEAR (SEE 200470-5 FOR TAKE-A-PART TOWBAR) | 1 | |
| 201CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) | 1 | |
| 2021795 | B737/ 100-900 & BBJ Aluminum Towbar - EN (CE) | 1 | |
| 2021930 | B727 & A300/310 Aluminum Towbar - EN (CE). Handles Boeing 727 and Airbus A300/310 airframes (also fits American Airlines 757 A /C.) | 1 | |
| 2024T3-10MM | ALUMINUM PLATE - ALCLAD THICKNESS 10MM | 1 | |
| 205CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 212-FB | Rolo-Flair® 37° Rotary Flaring Tool (Maximum torque: Copper & Aluminum Alloys) (Sizes: 1/8", 3/16", 1/4", 5/16", 3/8") (Add to cart: Add To Cart) | 3 | |
| 2213M | METRIC 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. | 1 | |
| 2506F | S/B 57-200 Douglas DC-9 Reference Standard 7075-T6 Aluminum. Figure 5, 6,7 | 1 | |
| 2510CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 251CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 27-1-6033 | Fokker 50/60 calibration standard Part 6 53-40-05 pages 7&8 figure 4&5. Material 2024-T3 Aluminum. | 1 | |
| 27-95031-001 | Fairchild METRO 23, Model SA227-CC, METRO 23, Model SA227-DC,Reference standard for inspection of the MLG and NLG Yoke Assembly. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 28-0-6049 | Fokker 70/100 Calibration Standard, Part 6 53-10-18 Page 12 Figure 8. Material: 2024-T351 Aluminum. Paint with Primer. Includes Test Report and Certificate of Conformance. | 1 | |
| 2890046-101 | CAP ASSY - ALUMINUM | 2 | |
| 29559-00 | NIPPLE, OUTLET ASSEMBLY, ALUMINUM | 5 | |
| 29A029 | Surface Standard, Per Airbus A319/320 51-63-01, 2024-T3 Aluminum | 5 | |
| 29A029-7075T6 | Surface Standard, Per Airbus A319/320 51-63-01, 7075-T6 Aluminum | 1 | |
| 29A029SH | REFERENCE BLOCK ALUMINUM | 1 | |
| 29A029YS | AIRBUS CALIBRATION STANDARD, A318/A319/A320/A321 51-63-01-991-001-A PB 1 FIG 60 & A350-A-51-90-01-01001-040A-A-NDT 1, 2024-T351 ALUMINUM. 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x 0.13mm(.0051") WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| 29A047 | Surface Standard, Per Airbus A319/320 51-63-01, 7075T6 Aluminum | 5 | |
| 2V705 | BELL OUTDOOR Flip/Snap Weatherproof Cover, 4.563 in W, 2.813 in H, Aluminum, Gray, Powder-Coated | 1 | |
| 301CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 30B | Economy Bending Brakes (Capacity (steel-aluminum): 16 ga.) (Maximum bend length: 18") (Shipping weight: 3.5 lbs (1.6 kgs)) (Add to cart: Contact us to order) (Capacity (steel-aluminum): 16 ga.) (Maximum bend length: 30") (Shipping weight: 11 lbs (5 kgs)) | 1 | |
| 313A/313B | BOEING REFERENCE STANDARD 737 PART 6 53-10-17 PAGE 7 FIGURE 3. 2024-T3 ALUMINUM | 1 | |
| 32-260 | Aluminum Hand Files (Overall length: 6" (132 mm)) (Size/diameter: 5/8" x 5/32") (Type: Flat) (Add to cart: Add To Cart) | 1 | |
| 32-261 | Aluminum Hand Files (Overall length: 6" (132 mm)) (Size/diameter: 5/8" x 5/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 8" (203 mm)) (Size/diameter: 25/32" x 7/32") (Type: Flat) (Add to cart: Add To Cart) | 1 | |
| 32-262 | Aluminum Hand Files (Overall length: 6" (132 mm)) (Size/diameter: 5/8" x 5/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 8" (203 mm)) (Size/diameter: 25/32" x 7/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 10" (254 mm)) (S | 2 | |
| 32-263 | Aluminum Hand Files (Overall length: 6" (132 mm)) (Size/diameter: 5/8" x 5/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 8" (203 mm)) (Size/diameter: 25/32" x 7/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 10" (254 mm)) (S | 1 | |
| 32-265 | Aluminum Hand Files (Overall length: 6" (132 mm)) (Size/diameter: 5/8" x 5/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 8" (203 mm)) (Size/diameter: 25/32" x 7/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 10" (254 mm)) (S | 1 | |
| 32-266 | Aluminum Hand Files (Overall length: 6" (132 mm)) (Size/diameter: 5/8" x 5/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 8" (203 mm)) (Size/diameter: 25/32" x 7/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 10" (254 mm)) (S | 1 | |
| 32-267 | Aluminum Hand Files (Overall length: 6" (132 mm)) (Size/diameter: 5/8" x 5/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 8" (203 mm)) (Size/diameter: 25/32" x 7/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 10" (254 mm)) (S | 2 | |
| 32-268 | Aluminum Hand Files (Overall length: 6" (132 mm)) (Size/diameter: 5/8" x 5/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 8" (203 mm)) (Size/diameter: 25/32" x 7/32") (Type: Flat) (Add to cart: Add To Cart) (Overall length: 10" (254 mm)) (S | 1 | |
| 34-820C | HIGH POWER C-YOKE RIVETER TRI-CYLINDER ( CAPACITY (ALUMINUM-STEEL): 1/4" - 3/16" )( CLOSED YOKE HEIGHT: 11/16" )( OVERALL LENGTH: 18-3/4" (47.6 CM) )( REACH: 1-1/2" ) | 1 | |
| 34-825A-1-1/2 | High Power Alligator Yoke Riveters (Reach: 1-1/2") (Maximum force @ 90 psi: 9000 lbs) (Capacity (aluminum - steel): 1/4" Alum - 3/16" Steel) (Closed yoke height: 7/8") (Overall length-weight: 17-1/2" (44.4cm)-8lbs (3.6kgs)) (Add to cart: Add To Cart) | 1 | |
| 34-825A-2-1/4 | High Power Alligator Yoke Riveters (Reach: 1-1/2") (Maximum force @ 90 psi: 9000 lbs) (Capacity (aluminum - steel): 1/4" Alum - 3/16" Steel) (Closed yoke height: 7/8") (Overall length-weight: 17-1/2" (44.4cm)-8lbs (3.6kgs)) (Add to cart: Add To Cart) (Rea | 1 | |
| 34-825A-3 | High Power Alligator Yoke Riveters (Reach: 1-1/2") (Maximum force @ 90 psi: 9000 lbs) (Capacity (aluminum - steel): 1/4" Alum - 3/16" Steel) (Closed yoke height: 7/8") (Overall length-weight: 17-1/2" (44.4cm)-8lbs (3.6kgs)) (Add to cart: Add To Cart) (Rea | 1 | |
| 3510CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 352CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 355CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 3M425-2 | ALUMINUM TAPE | 1 | |
| 3ZH07 | PRECISION KNIFE, 1/4 IN HANDLE DIAMETER, ALUMINUM HANDLE MAT | 1 | |
| 4010CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 401CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 4028P | BOEING TRANSDUCER POSITIONER 747 57-40-03 FIGURE 1 PAGE 4A. MATERIAL: ALUMINUM. Includes Certificate of Conformance. | 1 | |
| 405CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 4179A271 | ALUMINUM SAW BLADE | 1 | |
| 435-2 | ALUMINUM TAPE 2" | 2 | |
| 45 DEG PITCH/CATCH TRANSDUCER, P/N HMT 7-421-1.5 | TRANSDUCER, 5.0MHZ, 45 DEGREES IN ALUMINUM, SHEAR | 1 | |
| 45-127-1 | Custom Probe Locating Bushing Tool Figure 1 Page 6 Item #1. Material 2024-T3 Aluminum. | 1 | |
| 45-127-2 | Custom Probe Locating Bushing Tool Figure 1 Page 6 Item #2. Material 2024-T3 Aluminum. | 1 | |
| 45-128 | Custom 8 Hole Calibration Standard Test Coupon Assembly Figure 5 Page 10 to include the following Pieces. Figure 2 Page 7. Material .071" 2024-T3 Clad Aluminum, 7 EDM Flaws total. Figure 3 Page 8 .250" 4130or4340 Steel 0 EDM Flaws total and Figure 4... | 2 | |
| 45-128-1 | Custom 8 Hole Calibration Standard Test Coupon. Figure 1 Page 7. Material .071" 2024-T3 Clad Aluminum. 7 EDM Flaws total. | 1 | |
| 45-128-3 | Custom 8 Hole Calibration Standard Test Coupon. Figure 4 Page 9. Material .125" 2024-T3 Clad Aluminum. 0 EDM Flaws total. | 1 | |
| 4510CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 452CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 502CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 513.32.12.059 | ALUMINUM ANGLE | 1 | |
| 5290020-4 | Cessna Model 401/402 Calibration Standard Figure 4 part 2 & 3 Inspection. Plate A - 7075-T6 Aluminum and Plate B - 2024-T3 Aluminum. | 1 | |
| 53-420-2A | USATCO HAND RIVET SQUEEZERS ( YOKES INCLUDED: 2" )( SETS INCLUDED: 3 UNIVERSAL AN470 (3/32", 1/8" )( ALUMINUM CAPACITY: SQUEEZING: 1/16" - 5/32" ) | 1 | |
| 55-36-01 | UT CALIBRATION REFERENCE STANDARD , STEP WEDGE, 7000 SERIES ALUMINUM, GENERIC AS PER ATR 72 NTM 55-36-01 | 1 | |
| 550T05669-001 | Fitting-EFCU,Aluminum | 1 | |
| 550T05669-001 | FITTING-EFCU,ALUMINUM | 1 | |
| 552CFMC | Aluminum Star Cut Carbide Rotary Files (Cut length: 3/4") (Diameter: 3/8") (Type: Tree Radius) (Add to cart: Contact us to order) (Cut length: 3/4") (Diameter: 3/8") (Type: Cylindrical Flat End) (Add to cart: Add To Cart) (Cut length: 1") (Diameter: 1/2") | 1 | |
| 553950 GRIT 120 | HOLEX ABRASIVE DISC (A-ALUMINUM OXIDE) 50.8MM DIA GRIT 120 PACKAGING | 1 | |
| 553950 GRIT 80 | HOLEX ABRASIVE DISC (A-ALUMINUM OXIDE) 50.8MM DIA GRIT 80 PACKAGING: 100EA/BOX | 1 | |
| 553955 GRIT 120 | HOLEX ABRASIVE DISC (A-ALUMINUM OXIDE) 76.2MM DIA GRIT 120 PACKAGING: 50EA/BOX | 1 | |
| 553955 GRIT 80 | HOLEX ABRASIVE DISC (A-ALUMINUM OXIDE) 76.2MM DIA GRIT 80 PACKAGING: 50EA/BOX | 1 | |
| 560AT | TRANSDUCER, 5 MHZ, 60° ALUMINUM; SEARCH UNIT SYSTEMS | 1 | |
| 57-10-119/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-10-42 PT 6 FIGURES 4&5 PAGE 7&8. Material: 7075-T6 & 2014A-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-20-148A/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-24 PT 6 FIGURES 5&6 PAGE 9&10. Material: 2024-T3 & 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-20-163/1 | BAE 146-RJ SERIES REFERENCE STANDARD 57-20-28 PT 6 FIGURES 4&5 PAGE 9&10. Material: 2024-T3 & 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 57-54-103C | CUSTOM BOEING REFERENCE STANDARD 7075-T6 ALUMINUM | 1 | |
| 57A-3065 | TRANSDUCER, 5MHZ, 60° IN ALUMINUM, SIDE MOUNT | 1 | |
| 57A3065 | TRANSDUCER, 5MHZ, 60° IN ALUMINUM, SIDE MOUNT | 1 | |
| 6061 AL BLOCK | Aluminum Block 110mm(3.937") x 18mm(7.09") x 15mm(.591") Block. Material: 6061-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 6061-T6 | Aluminum seamless tubing | 1 | |
| 60667-1 | CHANNEL BOARD ALUMINUM ALLOY | 1 | |
| 60667-2 | BANDING CHANNEL BOARD (ALUMINUM ALLOY) | 1 | |
| 640-025-007 | GEIT ROTARY TAPERED STANDARD BLOCK KIT ALUMINUM | 1 | |
| 7075-T6 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 1 | |
| 7150-T651 | 5,00MM THICK ABM3-1031 (7150-T651) ALUMINUM ALLOY ( QTY 0.5 M2) | 1 | |
| 717RS12 | 717-200 REFERENCE STANDARD...FIG. 1.16 SHEET 1-5, PAGES 1-5. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS15 | 717-200 REFERENCE STANDARD...FIG. 1.4 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS20 | 717-200 REFERENCE STANDARD...FIG. 1.21 SHEET 1-3, PAGES 1-3. MATERIAL: 2014-T6 and 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS23 | 717-200 REFERENCE STANDARD...FIG. 1.8 SHEET 1-5, PAGES 1-5. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2A | 717-200 REFERENCE STANDARD...FIG. 1.12 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2B | 717-200 REFERENCE STANDARD...FIG. 1.13 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2C | 717-200 REFERENCE STANDARD...FIG. 1.14 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS2D | 717-200 REFERENCE STANDARD...FIG. 1.15 SHEET 1-4, PAGES 1-4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS4 | 717-200 REFERENCE STANDARD FIGURE 1.17 SHEETS (1-4 ), PAGES 1-4. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS7 | 717-200 REFERENCE STANDARD...FIG. 1.22 SHEET 1-7, PAGES 1-7. MATERIAL: 2024-T3 and 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RS8 | 717-200 REFERENCE STANDARD...FIG. 1.23 SHEET 1-6, PAGES 1-3. MATERIAL: 2024-T3 and 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RST5 | 717-200 REFERENCE STANDARD...FIG. 1.18 SHEET 1-3, PAGES 1-3. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 717RST6 | 717-200 REFERENCE STANDARD...FIG. 1.19 SHEET 1-3, PAGES 1-3. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 7637987-17 | A53-142 Douglas DC-9 Probe Holding Fixture and alignment 2024-T3 Clad Aluminum. Figure 1, Sheet 4 | 1 | |
| 7637987-9 | A53-142 Douglas DC-9 7637987-9 Reference Standard Assembly 2024-T3 Clad Aluminum. Figure 1, Sheets 2&3 | 1 | |
| 7947479-10 | REFERENCE STANDARD ALUMINUM 7075-T6 MULTI-PURPOSE TESTING PHTOOLSP/N 7947479-10, NRK-3A (REFERENCE USAF TO-33B-1-1) | 3 | |
| 7947479-10 ALUMINUM | Air Force Standard, 7075T6 aluminum | 1 | |
| 80RS14 | 717-200 REFERENCE STANDARD...FIG. 1.6 SHEET 1-4, PAGES 1-4. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 80RS18 | 717-200 REFERENCE STANDARD...FIG. 1.5 SHEET 1-5, PAGES 1-5. MATERIAL: 7075-T6 CLAD ALUMINUM, 2014-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.53.80.003 | 2 | |
| 80RS19 | 717-200 REFERENCE STANDARD...FIG. 1.2 SHEET 1-3, PAGES 1-3. MATERIAL: 2024-T3 or 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 80RS24 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 2024-t351, -7 DETAIL ALUMINUM 7075-T6511, -9 DETAIL ALUMINUM 7075-T73 and -11 DETAIL ALUMINUM 7075-T73. Includes Test Report and Certificate of Conformanc | 1 | |
| 80RS25 | BOEING REFERENCE STANDARD. MATERIALS: -3 DETAIL ALUMINUM SKIN 2024-T351, -5 DETAIL ALUMINUM STRINGER 7075-T6511, -7 DETAIL ALUMINUM 7075-T73. FASTENERS: S4932869-6-6 (8 EA. ), S4932869-8-6 (12 EA. ), S4932869-8-7 (16 EA. ). COLLARS: NAS 1080-06 (8 EA... | 1 | |
| 815P093 | REFLECTION SPOT PROBE, Ø.984" HIGH X .630" OD, 100-500HZ, ALUMINUM HOUSING, USED WITH 99F57204140000 | 1 | |
| 841H | ALUMINUM BENDER WITH HANDLE | 1 | |
| 8500-0001-61 | ALUMINUM CRIMPING TOOL KIT | 5 | |
| 89015K25 | ALUMINUM PLATE 6061-T6 0.025 X 6" X 48" | 1 | |
| 89965K42 | ALUMINUM TUBING 1/4 OD X .035 W X 6' LENGTH | 1 | |
| 9 983 | EMERY, CLOTH ALUMINUM OXIDE GRIT NO 400 (50 YRD/ ROLL) | 1 | |
| 98F10201000211 | ALUMINUM PLATES | 1 | |
| 98L57103002000 | AIRBUS A380-800 FIGURE 57-11-03-991-008-A PAGE 39. MATERIAL: 2024 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 98S36005001200 | ALUMINUM LID | 3 | |
| 98S36005003200 | ALUMINUM LID | 5 | |
| 98S51005000-200 | ATR 72 TAP TEST TOOL FIGURE 1 ATR NTM 51-30-00 PAGE 304. MATERIAL: 7075-T6 ALUMINUM. | 4 | |
| 98S51605001-200 | ALUMINUM CALIBRATION STANDARD | 4 | |
| 98S51605001-206 | MINI ANGLE BEAM ALUMINUM V2 BLOCK ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). Aluminum 7075-T6. Includes form fitted case. | 3 | |
| 98S51605001-212 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes: ( 9.5mm, 9.9mm, 10.3mm, 11.1mm, 11.5mm, 11.9mm, 12.7mm, 13.5mm, 14mm ). Includes Test Report and Certificate of C... | 4 | |
| 98S51605001-218 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 3.6mm, 4mm, 4.8mm, 5.2mm, 5.7mm, 6.4mm, 6.7mm, 7.1mm, 7.9mm, 8.3mm, 8.7mm ). Includes Test Report and Certificat... | 3 | |
| 98S51605001-224 | ATR REFERENCE STANDARD 2024-T3 Aluminum PT 6 51-60-00. Calibration Standard for Rotary Probes..Figure 616 (Sheet 1) Page 629, Hole Sizes:( 14.3mm, 14.6mm, 15.1mm, 15.9mm, 16.3mm, 16.7mm, 28.9mm, 19.8mm, 22.2mm, 22.6mm, 23mm ). Includes Test Report and... | 4 | |
| 98S53005020-200 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-202 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-204 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-206 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-208 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53005020-210 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-212 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-214 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005020-216 | ATR72 CALIBRATION STANDARD PART 6 53-00-01 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 98S53005021-000 | ATR72 CALIBRATION STANDARD 53-51-01 PART 6 PAGE 608 FIGURE 601 SHEET 1. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S53305004-000 | ATR REFERENCE STANDARD PT 5 53-51-01 Figure 501, Page 506 Does not include Stringer Hook. Material: 2024-T3 Aluminum. | 5 | |
| 98S53805002-000 | ALUMINUM CALIBRATION STANDARD | 6 | |
| 98S57205024-200 | ATR REFERENCE STANDARD PT 4 57-24-09 PAGE 403 FIGURE 401. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 98S57205030.004 | UT CALIBRATION REFERENCE STANDARD , STEP WEDGE, 7000 SERIES ALUMINUM, GENERIC | 5 | |
| 99A51107300000 | CALIBRATION BLOCK ALUMINUM | 5 | |
| 99A530003001101 | CALIBRATION BLOCK ALUMINUM | 1 | |
| 99A53003001101 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM.. Includes Test Report an Certificate of Conformance. | 8 | |
| 99A53003001101/A1 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A1-A6 | 2 | |
| 99A53003001101/A13 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A13-A18 | 1 | |
| 99A53003001101/A7 | AIRBUS MULTI HOLE REFERENCE STANDARD A-318- A321 51-63-04 PART 6 FIGURE 601, PAGE 601/602. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. Note: Holes A7-A12 | 1 | |
| 99A53003001103 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, A340_500_600 51-63-05-991-001-A 2024-T3 ALUMINUM. Includes. Includes Test Report and Certificate of Conformance. | 4 | |
| 99A53003001106 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, A330, A340_500_600 51-63-05-991-001-A . MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 4 | |
| 99A53003003001101 | ROTARY CALIBRATION STANDARD ALUMINUM | 1 | |
| 99A53107283000 | AIRBUS A330 REFERENCE STANDARD 7075-T7451 ALUMINUM. PART 4 53-40-18-270-801-A-01 - Bulk Cargo Compartment Door Cut-out Lateral Frame at Bulk Door-Fittings, FR67 at STGR37 and FR69 at STGR38, RH, FIGURE 53-40-18-991-015-A. Includes Test Report and Cer... | 2 | |
| 99A53307267000 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material Aluminum 2024-T3 or T4. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A53307267000 7075T6 | AIRBUS A300-600 CALIBRATION BLOCK PART 4 53-30-52 PAGE 413 FIGURE 407. Material Aluminum 7075-T6. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A53307274000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD 51-10-16-991-005A, PAGE 10. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 5 | |
| 99A53307274000-7075 | AIRBUS REFERENCE STANDARD A318/A319/A320/A321 Part 6 51-10-16 Page 7 Figure 51-10-16-991-005-A. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A55209001000 | Airbus Tap Test Tool A318-A321 PT 5 51-10-03 & A330 Figure 51-10-03-991-003-A. Material 2024 Aluminum. Includes Certificate of Conformance. | 14 | |
| 99A55407322000 | AIRBUS REFERENCE STANDARD A330 Part 9 - Visual 55-40-00 Page 906 Figure 904 Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103001000 | AIRBUS A310 REFERENCE STANDARD 57-10-24 PART 4 FIGURE 403 PAGE 404. MATERIAL: 2024-T351 ALUMINUM...Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103003000 | AIRBUS A310 REFERENCE STANDARD 57-10-24 PART 4 FIGURE 404 PAGE 405. MATERIAL: 2024-T351 ALUMINUM...Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103005002 | AIRBUS REFERENCE STANDARD A310 PART 4 57-10-47 PAGE 406 FIGURE 403 Material: 2024-T351 ALUMINUM Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57103048000 | AIRBUS A300-600 REFERENCE STANDARD PART 4 57-10-36 PAGE 407/408 FIGURE 403. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99A57103056000 | AIRBUS A300-600 REFERENCE STANDARD PART 4 57-10-50 PAGE 411 FIGURE 403. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A57104331000 | AIRBUS CALIBRATION BLOCK A318/A319/A320/A321: PART 4 57-00-00-991-003-A SHEET 01, PAGE 10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| 99A57204402000 | AIRBUS REFERENCE STANDARD A300 PT 4 57-23-07-991-003-A . MATERIAL 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99A57204403000 | AIRBUS REFERENCE STANDARD A300 PT 4 57-00-11 FIG.3 SHEET 1 PG.5-6, A310 PT 4 57-51-24. MATERIAL 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 99A57204403001 | AIRBUS CALIBRATION BLOCK A300-600 PART 4 57-21-96 PAGE 404&405 and A318/A319/A320/A321: PART 4 57-20-64-991-006-A SHEET 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 5 | |
| 99A57504294000 | AIRBUS A300-600 CALIBRATION STANDARD PT 6 57-52-05 PAGE 606 FIGURE 602 (SHEET 2). MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51103001000 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, FIGURE 51-10-04-991-014-A. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D51103016000 | AIRBUS REFERENCE STANDARD NTM A318/A319/A320/A321, FIGURE 51-10-31-991-004-A. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99D57004000000 | Airbus Calibration Standard Block Set. A340-200/-300 51-63-03 Pg. 2-3, A300, A300-600, A310, A318/A319/A320/A321, A330, A340, A380 51-34-03, Figure 1 Sheett 1 Pg.1-2. Material: AMS-QQ-A-250 2024-T351 Aluminum. Includes Test Report and Certificate of C... | 4 | |
| 99D57103009000 | AIRBUS REFERENCE STANDARD. MATERIAL: 7175-T7 ALUMINUM ANODIZED. PAINT WITH PRIMER | 4 | |
| 99D57103025000 | Airbus A318/A319/A320/A321 Reference Block. 2024 Aluminum. PB4 57-11-73 Page 52 Sheet 01, 57-11-73-991-020-A REVISION 114. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57103026000 | Airbus A318/A319/A320/A321 Reference Block. 2024 Aluminum. PB4 57-11-73 Page 52 Sheet 01, 57-11-73-991-020-A SHEET 02 REVISION 115. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57103029000 | Airbus A318/A319/A320/A321 Reference Block. 2024 Aluminum. PB4 57-12-02 Page 99 Sheet 01, 57-12-02-991-003-A SHEET 1. | 1 | |
| 99D57103031000 | Airbus A318/A319/A320/A321 Reference Block. 2024 Aluminum. PB4 57-12-04 Page 114 Sheet 01, 57-12-04-991-020-A REVISION 114. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57103033000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD PART4 57-11-82-991-008-A PAGE 406 MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and certificate of Conformance. | 2 | |
| 99D57103036000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD PART4 57-11-47-991-003-A . Material: 7075 Aluminum Includes Test Report and certificate of Conformance. | 2 | |
| 99D57204108000 | AIRBUS GUIDE BLOCK A318/A319/A320/A321 Part 4 57-20-10 Page 426 Figure 412. Material: Aluminum and Non Conductive Material. Includes Test Report and Certificate of Conformance. | 4 | |
| 99D57404002000 | TOOL-BLOCK CALIBRATION ALUMINUM AERO TEST | 1 | |
| 99D57504107000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD INBOARD LUG 2024-T351 ALUMINUM. PART 4: 57-53-50 FIGURE 403 PAGE 404. Includes Test Report and Certificate of Conformance. | 2 | |
| 99D57504108000 | AIRBUS A318/A319/A320/A321 REFERENCE STANDARD OUTBOARD LUG 2024-T351 ALUMINUM. PART 4: 57-53-50 FIGURE 404 PAGE 405. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53103004000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-08-991-004-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103005000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-09-991-003-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103006000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 53-11-48-991-004-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53103009000 | AIRBUS REFERENCE STANDARD A330 PT 4 53-11-08-009-A. MATERIAL: 2024 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53103010000 | AIRBUS REFERENCE STANDARD A330 53-11-79-991-003-A PB4. MATERIAL: 2024-T3 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53107330000 | Airbus A318/A319/A320/A321 Conductivity Standard Block Set SB A320 57-1190 Figure 3. Material: 2024-T3 and 2024-T0 Aluminum. .047", 063" and .080" thickness in each Aluminum Temper Painted with Primer. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53113000000 | AIRBUS A330/200-300 REFERENCE STANDARD PART 4 53-11-96 FIGURE 403 SHEET 1, 2024-T3 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303000001 | AIRBUS CALIBRATION STANDARD A340-200/-300 FIGURE 53-31-39-991-003-A. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303008000 | AIRBUS REFERENCE STANDARD A330 PT 4 53-31-07 FIGURE 403 PAGE 407/408, MATERIAL 7075 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F53303073000 | AIRBUS CALIBRATION STANDARD A340-500/-600 FIGURE 53-39-22-991-038-A SHEET 1. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303084000 | AIRBUS CALIBRATION STANDARD A340-500/-600 FIGURE 53-39-22-991-038-A SHEET 2. MAERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303096000 | AIRBUS REFERENCE STANDARD A330/A340-200/-300 53-30-29-PB4. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303100000 | AIRBUS A330 REFERENCE BLOCK 53-30-51-991-003-A. MATERIAL: 7075 OR EQUIVQLENT ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303101000 | AIRBUS A330 REFERENCE BLOCK 53-30-52-991-003-A. MATERIAL: 7050 OR EQUIVALENT ALUMINUM. US INSPECTION OF MAIN LONGERON EXTENSION BETWEEN FR53.2 AND FR53.3. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303113000 | AIRBUS REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. 2 CORNER EDM SLOTS: 3mm x 3mm(.120" x .120") x 0.3mm(.012") Wide. Paint with primer. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F53303120000 | AIRBUS A330-300/A340-200 CALIBRATION STANDARD 53-30-28 FIGURE 53-30-28-005-A. MATERIAL: 7075-T7351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F53303121000 | AIRBUS A330 REFERENCE STANDARD PART 4 53-30-71-991-004-A SHEET 1, 7175-T7351 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F57103028000 | AIRBUS STANDARD 57-11-63-991-007-E SHEET 01 PAGE 20, ALUMINUM 2024 | 2 | |
| 99F57103032000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-11-22 Page7 Figure 57-11-22-991-003-A. Material: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57103041000 | AIRBUS REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM WITH PROTECTIVE FINISH 13-002 and PAINT PRIMER 16-006. Includes Test Report and Certificate of Conformance(COC) | 2 | |
| 99F57103042001 | AIRBUS REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM WITH PROTECTIVE FINISH 13-002 and PAINT PRIMER 16-006. APPLY TOP COAT 16-008. Includes Test Report and Certification of Conformance(COC) | 2 | |
| 99F57103051000 | AIRBUS REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM WITH PROTECTIVE FINISH 13-002 and PAINT PRIMER 16-006. APPLY TOP COAT 16-008 | 1 | |
| 99F57103057000 | AIRBUS REFERENCE STANDARD A330 PT 4 57-11-79-991-003-A. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57103059000 | AIRBUS REFERENCE STANDARD 57-11-68-991-007-A. MATERIAL: 7175 or 7075 ALUMINUM WITH PROTECTIVE FINISH 13-002 and PAINT PRIMER 16-006. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57203002000 | AIRBUS REFERENCE STANDARD A330 PT 4 57-20-86-991-003-A. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57204173000 | AIRBUS A330 REFERENCE STANDARD 57-20-46-270-801-A-01 PAGE 12. OUTER WING REAR SPAR UPPER & LOWER FLANGES BETWEEN RIB7 and RIB12 LH/RH. MATERIAL: 7010 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| 99F57244001000 | AIRBUS A330 REFERENCE STANDARD PART 4 57-24-04-991-010-A SHEET 1, 2024-T351 ALUMINUM. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99F57500001000 | AIRBUS CALIBRATION STANDARD A340-200/-300, FIGURE 57-29-02-991-003-A. MATERIAL: 7050-T7651 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 99F57603002000 | AIRBUS REFERENCE STANDARD A330 Part 4 57-61-06 Page 404 Figure 403. Material: Aluminum Alloy. Includes Test Report and Certificate of Conformance. | 1 | |
| 99F57603006000 | AIRBUS REFERENCE STANDARD A330-200F PT 4 57-61-21-991-003-A PAGE 1. Material 2024 Aluminum. lncludes Test Report and Certificate of Conformance. | 1 | |
| 99L53103000000 | A380-800 REFERENCE STANDARD 2024 ALUMINUM; FIGURE:53-11-03-991-009-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103001000 | A380-800 REFERENCE STANDARD 2024 ALUMINUM; FIGURE:53-11-12-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103002000 | A380-800 REFERENCE STANDARD 2024 ALUMINUM; FIGURE:53-11-03-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103004000 | A380 REFERENCE STANDARD 2024-T351 ALUMINUM; FIGURE:53-11-09-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103005000 | A380 REFERENCE STANDARD 7010 ALUMINUM; FIGURE:53-11-23-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103006000 | A380 REFERENCE STANDARD 2024-T351 ALUMINUM; FIGURE:53-11-07-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103008000 | A380 REFERENCE STANDARD 2024-T351 ALUMINUM; FIGURE:53-11-11-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103010000 | A380 REFERENCE STANDARD 2024-T351 ALUMINUM; FIGURE:53-31-24-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103012000 | A380 REFERENCE STANDARD 2024-T351 ALUMINUM; FIG.53-11-22-991-009-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103013000 | A380 REFERENCE STANDARD 7010 OR EQUIVALENT ALUMINUM; FIG.53-11-20-991-003-A SHEET 1. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103020000 | AIRBUS A380 REFERENCE STANDARD FIGURE 7 53-11-10-010-A PG. 25. Material: 7075-T751 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53103021000 | AIRBUS A380 REFERENCE STANDARD FIGURE 6 53-11-02-009-A PG. 17-18. Material: 7075-T7 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53113002000 | AIRBUS A380 REFERENCE STANDARD FIGURE 6 53-11-10-009-A PG. 24. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303002000 | A380-800 REFERENCE STANDARD 2024 ALUMINUM; FIGURE:53-31-22-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303009000 | A380 REFERENCE STANDARD 2024-T351 ALUMINUM; FIGURE:53-31-20-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303016000 | A380 REFERENCE STANDARD 7075-T6 OR 7075-T7 ALUMINUM; FIGURE:53-31-30-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303017000 | A380 REFERENCE STANDARD 7050-T73 OR 7075-T73 ALUMINUM; FIG.53-31-30-991-009-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303022000 | AIRBUS A380-800 FIGURE 53-31-12-991-003-A PAGE 445. MATERIAL: 2024 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303025000 | AIRBUS A380-800 53-31-04-010-A. MATERIAL: 2024 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303027000 | AIRBUS REFERENCE STANDARD A380-800 53-31-37-991-013A. MATERIAL: 7475 OR EQUIVALENT 7050 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303032000 | A380-800 REFERENCE STANDARD 7075 ALUMINUM; FIGURE:53-31-53-991-003-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L53303035000 | AIRBUS REFERENCE STANDARD A380 53-31-27-991-021-A PAGE 23. MATERIAL: 7175 OR 7075 ALUMINUM. Includes Certificate of Conformance. | 1 | |
| 99L53509001000 | AIRBUS A380 REFERENCE STANDARD 7050-T7 OR 2024 ALUMINUM; FIGURE:53-51-02-991-008-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L54503003000 | AIRBUS A380 REFERENCE STANDARD 7050-T7 OR 2024 ALUMINUM; FIGURE:54-51-06-991-010-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L55209001000 | AIRBUS REFERENCE STANDARD 55-21-03-991-003-1. 7050-T7451 ALUMINUM | 1 | |
| 99L57103002000 | A380-800 REFERENCE STANDARD FIGURE:53-11-03-991-008-A. Material: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57203005000 | A380 REFERENCE STANDARD 2024-T351 ALUMINUM; FIG.57-11-03-991-008-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57203006000 | AIRBUS REFERENCE STANDARD A380-800 7075 ALUMINUM; FIG.57-21-10-991-016-A. Includes Test Report and Certificate of Conformance. | 1 | |
| 99L57204005000 | AIRBUS A300-600, A319,A320, A321, A330, A340, A380 REFERENCE STANDARD FIGURE:57-26-01-991-003-A. MATERIA L: 7010-T7651 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 99N51109009000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 11. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99N51109010000 | Airbus Calibration Block A318/A319/A320/A321 51-10-32 Figure 51-10-32-991-003-A Sheet 02 Page 12. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 99T045-1 | Western Global Airlines LFEC Satcom Antenna Cutout Reference Standard, Appendix 1 (Sheet 1). Material: 2024-T3 Clad Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| 99V52307336000 | AIRBUS REFERENCE STANDARD A380 52-31-01 FIGURE 5-52-31-01-005-A.MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| 9C6020G03 | FIXTURE, LIFT-ENGINE/PROPULSOR (ALUMINUM) | 1 | |
| 9C6020G05 | FIXTURE, LIFT-ENGINE/PROPULSOR (ALUMINUM) | 3 | |
| 9RS11 | 717-200 REFERENCE STANDARD...FIG. 1.3 SHEET 1-3, PAGES 1-3. MATERIAL: 2024-T3 and 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| 9RS5 | DC-9 REFERENCE STANDARD PAGES 17-20, SHEETS 1-4. MATERIAL: 2024-T3 CLAD ALUMINUM | 2 | |
| 9RST1 | 717-200 REFERENCE STANDARD...FIG. 1.11 SHEET 1-3, PAGES 1-3. MATERIAL: 2024-T3 and 2024-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.FASTENER (MS20470AD8, NAS1478-6 + NAS1080-8) | 1 | |
| 9RST8 | 717-200 REFERENCE STANDARD FIGURE 1.10 SHEETS (1-6 ), PAGES 1-6. MATERIAL: 2024-T3 ALUMINUM and PHENOLIC(DMS1558). Includes Test Report and Certificate of Conformance. FASTENER (NAS1203 + NAS1252-10H + NAS679-A3, S432867-8 + NAS1080-8) | 1 | |
| 9SF5091-27-33I | ROLLER ALUMINUM SLEEVE | 1 | |
| A1310B-20 | 2-11/16IN ALUMINUM DRIVER | 1 | |
| A1310B-21 | 2-27/32IN ALUMINUM DRIVER | 1 | |
| A1310B-22 | 2-7/8IN ALUMINUM DRIVER | 1 | |
| A1310B-23 | 3 IN ALUMINUM DRIVER | 1 | |
| A1310B-24 | 3-1/4 IN ALUMINUM DRIVER | 1 | |
| A1310B-25 | 3-1/2 IN ALUMINUM DRIVER | 1 | |
| A1310B-26 | 3-3/4 IN ALUMINUM DRIVER | 1 | |
| A305 | BOEING REFERENCE STANDARD PART 6 57-30-03 pg. 3 Fig 1 & 57-10-18. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| A352 | BOEING REFERENCE STANDARD 737 PART 6 53-10-04 PAGE 4 FIGURE 1. 2024-T3 CLAD ALUMINUM OR 7075-T6 BARE. Includes Test Report and Certificate of Conformance. | 11 | |
| A5014SM | TRANSDUCER, 5MHZ, 60° IN ALUMINUM, .37 X .37 X .25, TOP CONNECTOR, BAE 146 SERIES/AVRO-RJ SERIES PT4 | 1 | |
| A5068 | TRANSDUCER, 5MHZ, 60° IN ALUMINUM, TOP CONNECTOR | 3 | |
| A5068-5MHZ60 | TRANSDUCER, 5MHZ, 60° IN ALUMINUM, SIDE MOUNT, A5068-RM | 1 | |
| A5069 | TRANSDUCER, 5MHZ, 70° IN ALUMINUM, .380" X .380" X .274" CASE SIZE, TOP CONNECTOR | 2 | |
| A593S-SM | TRANSDUCER, 5MHZ X .25", 70° IN ALUMINUM, TOP MOUNT | 1 | |
| ABM-0710-45T | ANGLE BEAM TRANSDUCER, 4MHz 45° IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-0710-60T | ANGLE BEAM TRANSDUCER, 4MHz 60° IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-0710-70T | ANGLE BEAM TRANSDUCER, 4MHz 70° IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-0711T | CUSTOM ANGLE BEAM TRANSDUCER, 5MHz 55° IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR, .100" x .450" ELEMENT. CASE SIZE: ..200" L x .500" W x .500" H. Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-5021S | 45° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .500"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-5021T | 45° in ALUMINUM 5MHz TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .500"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-5022S | 30° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .500"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-5023S | 35° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .500"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-5024S | 50° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .500"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-5026T-R | 13.5° in ALUMINUM 5MHz TRANSDUCER WITH A 1.33" RADIUS, SUPPLIED WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .500"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-5027T-R | 30° in ALUMINUM 5MHz, TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, WITH A 5.0"RADIUS. CASE SIZE: .500"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-5028R | 13.5° in ALUMINUM 10MHz TRANSDUCER WITH A 1.33" RADIUS, SUPPLIED WITH SIDE MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .500"L x .45"H x .25"W. Includes Test Report and Certificate of Conformance. | 1 | |
| ABM-5029R | 35.5° in ALUMINUM 10MHz, TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, WITH A 5.0"RADIUS. CASE SIZE: .500"L x .45"H x .25"W. Includes Test Report and Certificate of Conformance. | 1 | |
| ABS-580 | STAIRS - PASSENGER - TRUCK MOUNTED - ALUMINUM STAIRS - ADJUSTS TO ALL ENTRY DOOR SILL HEIGHTS FROM 86" TO 228" | 1 | |
| ABS324205-2 | Flat Standard with Radius Notch, Forged Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| ABWM-4086T | SHEAR WAVE WEDGE FOR ALUMINUM | 1 | |
| ABWM-4T-45-COD/1.84 | BAE 146 SERIES / AVRO-RJ SERIES 45° DEGREE IN ALUMINUM WEDGE 3/8-32 THREAD WITH A 0.92" RADIUS | 1 | |
| ABWM-4T-45-COD/1.88 | BAE 146 SERIES / AVRO-RJ SERIES 45° DEGREE IN ALUMINUM WEDGE 3/8-32 THREAD WITH A 0.94"" RADIUS | 1 | |
| ABWM-4T-45-COD/2.10 | BAE 146 SERIES / AVRO-RJ SERIES 45° DEGREE IN ALUMINUM WEDGE 3/8-32 THREAD WITH A 1.050" RADIUS | 1 | |
| AC-324 | Aluminum 90° Angle Clamp (Throat: 4") (Miter capacity: 2-3/4") (Add to cart: Add To Cart) | 1 | |
| ACTR4151A | R134A ALUMINUM GAUGE SET | 1 | |
| ADPKIT | ALUMINUM DENT PULLER/TOOL KIT | 1 | |
| ADPKITJR | ALUMINUM DENT PULLER | 1 | |
| AF-560AT | SMALL 60° TOP MOUNT TRANSDUCER, ALUMINUM 187"x.25" ELEMENT. CASE SIZE; .400"L x .300"W x .375"H | 1 | |
| AF-6021 | ABOSLUTE SLIDING PROBE WITH SEPARATE DRIVER/RECEIVER COILS, REFLECTION. ALUMINUM HOUSING. 200HZ-100KHz. 4-Pin FISCHER CONNECTOR. Includes Test Report and Certificate of Conformation. | 1 | |
| AF5-2024-T3-.020-.100 | UT 5 STEP WEDGE .020", .040", .060", .080", .100. MATERIAL: 2024-T3 ALUMINUM | 1 | |
| AF5-7075-T6-.020-.100 | UT 5 STEP WEDGE .020", .040", .060", .080", .100. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| AFHS20-2A-5 | Aluminum Multi-hole reference standard with certificate. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains two EDM corner... | 1 | |
| AFK-UTASW10-12 | ULTRASONIC ANGLE BEAM TRANSDUCER KIT. CONSISTS OF A QUANTITY OF 12 10 MHz TRANSDUCERS WITH MICRODOT CONNECTORS FOR INSPECTION OF ALUMINUM SURFACES. Includes Test Report and Certificate of Conformation. Custom fitted waterproof Kit Box Included. Kit Pa | 1 | |
| AFK-UTASW5-12 | ULTRASONIC ANGLE BEAM TRANSDUCER KIT. CONSISTS OF A QUANTITY OF 12 5 MHz TRANSDUCERS WITH MICRODOT CONNECTORS FOR INSPECTION OF ALUMINUM SURFACES. Includes Test Report and Certificate of Conformation. Custom fitted waterproof Kit Box Included. Kit Pa | 1 | |
| AFL-1045AT | 45° ALUMINUM, ANGLE BEAM TRANSDUCER 10MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFL-1060AT | 60° ALUMINUM, ANGLE BEAM TRANSDUCER 10MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFL-1070AT | 70° ALUMINUM, ANGLE BEAM TRANSDUCER 10MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFL-1075AS | 75° ALUMINUM, ANGLE BEAM TRANSDUCER 10MHz .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AFL-245AT | 45° IN ALUMINUM ANGLE BEAM TRANSDUCER 2.25MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )TOP MOUNT MICRODOT CONNECTOR | 1 | |
| AFL-245AT-1 | 45° IN ALUMINUM ANGLE BEAM TRANSDUCER 2.25MHZ .375"x.375" ELEMENT, CASE SIZE( 1.00 L X .500 W X .625 H )TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFL-260AT | 60° IN ALUMINUM ANGLE BEAM TRANSDUCER 2.25MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )TOP MOUNT MICRODOT CONNECTOR | 1 | |
| AFL-270AS | 70° IN ALUMINUM ANGLE BEAM TRANSDUCER 2.25MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )SIDE MOUNT MICRODOT CONNECTOR | 1 | |
| AFL-270AT | 70° IN ALUMINUM ANGLE BEAM TRANSDUCER 2.25MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )TOP MOUNT MICRODOT CONNECTOR | 1 | |
| AFL-445AS | 45° ALUMINUM, ANGLE BEAM TRANSDUCER 4MHz .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFL-460AS | 60° ALUMINUM, ANGLE BEAM TRANSDUCER 4MHz .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFL-470AS | 70° ALUMINUM, ANGLE BEAM TRANSDUCER 4MHz .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFL-545AS | 45° ALUMINUM, ANGLE BEAM TRANSDUCER 5MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AFL-545AT | 45° ALUMINUM, ANGLE BEAM TRANSDUCER 5MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AFL-560AS | 60° ALUMINUM, ANGLE BEAM TRANSDUCER 5MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance | 1 | |
| AFL-560AT | 60° ALUMINUM, ANGLE BEAM TRANSDUCER 5MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. 737 Pt4, 57-10-08 & 737 Pt4, 57-10-15 | 1 | |
| AFL-560AT-SS | 60° ALUMINUM, ANGLE BEAM TRANSDUCER 5MHZ .375"x.375" ELEMENT, STAINLESS STEEL HOUSING. CASE SIZE( 1.030L X .500W X .625H )TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFL-570AS | 70° ALUMINUM, ANGLE BEAM TRANSDUCER 5MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. 737 Pt4, 57-10-17 | 1 | |
| AFL-570AT | 70° ALUMINUM, ANGLE BEAM TRANSDUCER 5MHZ .375"x.375" ELEMENT, CASE SIZE( 1.030L X .500W X .625H )TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. 737 Pt4, 57-10-05 | 1 | |
| AFM-1045AS | 45° ALUMINUM 10 MHZ .25" X .25" SIDE MOUNT MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-1045AT | 45° ALUMINUM 10MHZ 1/4" X 1/4" TOP MOUNT TRANSDUCER | 1 | |
| AFM-1060AS | 60° IN ALUMINUM 10 MHz .25" X .25" MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-1060AT | 60° ALUMINUM 10MHZ 1/4" X 1/4" TOP MOUNT TRANSDUCER | 1 | |
| AFM-1070AS | SUB-MINITURE 70° ANGLE BEAM TRANSDUCER IN ALUMINUM, 10MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-1070AT | SUB-MINITURE 70° ANGLE BEAM TRANSDUCER IN ALUMINUM, 10MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-1075AS | SUB-MINITURE 75° ANGLE BEAM TRANSDUCER IN ALUMINUM, 10MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-1075AT | SUB-MINITURE 75° ANGLE BEAM TRANSDUCER IN ALUMINUM, 10MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-240AT | 40° ANGLE BEAM TRANSDUCER in ALUMINUM, 2.25MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-245AS | 45° IN ALUMINUM MINI ANGLE BEAM TRANSDUCER, 2.25MHz .25" x .25" ELEMENT, CASE SIZE:( .75"L x .37"W x .50"H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-245AT | 45° IN ALUMINUM 2.25 MHz .25" X .25" TOP MOUNT ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H | 1 | |
| AFM-260AS | 60° IN ALUMINUM MINI ANGLE BEAM TRANSDUCER, 2.25MHz .25" x .25" ELEMENT, CASE SIZE:..( .75"L x .37"W x .50"H ) END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-260AT | 60° IN ALUMINUM MINI ANGLE BEAM TRANSDUCER, 2.25MHz .25" x .25" ELEMENT, CASE SIZE:..( .75"L x .37"W x .50"H ) TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-270AD | 70° ALUMINUM 2.25 MHZ 1/4" X 1/4" TOP and SIDE MOUNT TRANSDUCER BUILT IN ONE. TWO MICRODOT CONNECTORS | 1 | |
| AFM-270AS | 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 2.25MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-270AT | 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 2.25MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-270S | TRANSDUCER, 2.25MHZ, 70° IN ALUMINUM, SIDE MOUNT | 1 | |
| AFM-270T | TRANSDUCER, 2.25MHZ, 70° IN ALUMINUM, TOP MOUNT | 1 | |
| AFM-460AT | 60° IN ALUMINUM 4 MHz .25" X .25" ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H, WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-470AT | 70° IN ALUMINUM 4 MHz .25" X .25" ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H, WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-530AT | 30° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-540AS | 40° IN ALUMINUM 5 MHz .25" X .25" SIDE MOUNT ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H | 1 | |
| AFM-540AT | 40° ALUMINUM 5 MHZ 1/4" X 1/4" TOP MOUNT TRANSDUCER Includes Test Report and Certificate of Conformance | 1 | |
| AFM-545AD-1 | 45° ALUMINUM 5 MHZ 1/4" X 1/4" TOP and SIDE MOUNT TRANSDUCER BUILT IN ONE. TWO MICRODOT CONNECTORS. CASE SIZE: .700"L x .320"W x .620"H. Test Report and Certificate of Conformance. | 1 | |
| AFM-545AS | 45° ALUMINUM 5 MHZ .25" X .25" SIDE MOUNT MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-545AS-1 | 45° ALUMINUM 5 MHZ .25" X .25" SIDE MOUNT MINIATURE ANGLE BEAM TRANSDUCER. CASE SIZE: .700"L x .370"W x .500"H WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-545AT | 45° IN ALUMINUM 5 MHz .25" X .25" ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H, WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-560AD-1 | 60° ALUMINUM 5 MHZ 1/4" X 1/4" TOP and SIDE MOUNT TRANSDUCER BUILT IN ONE. TWO MICRODOT CONNECTORS..CASE SIZE: .700"L x .320"W x .620"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-560AS | 60° IN ALUMINUM 5 MHz .25" X .25" MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-560AS. | 60° IN ALUMINUM 5 MHz .25" X .25" MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-560AT | 60° IN ALUMINUM 5 MHz .25" X .25" ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H, WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-560AT-32 | 60° ALUMINUM 5 MHZ 1/4" X 1/4", TOP MOUNT, .320" MAX HEIGHT TRANSDUCER | 1 | |
| AFM-565AT | 65° IN ALUMINUM 5 MHz .25" X .25" TOP MOUNT MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-570AD | 70° ALUMINUM 5 MHZ 1/4" X 1/4" TOP and SIDE MOUNT TRANSDUCER BUILT IN ONE. TWO MICRODOT CONNECTORS | 1 | |
| AFM-570AD-1 | 70° ALUMINUM 5 MHZ 1/4" X 1/4" TOP and SIDE MOUNT TRANSDUCER BUILT IN ONE. TWO MICRODOT CONNECTORS. CASE SIZE: .700"L x .320"W x .620"H | 1 | |
| AFM-570AS | 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-570AT | 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-570AT-1 | 70° in ALUMINUM MINIATURE ANGLE BEAM TRANSDUCER , 5MHz, .20" x .20" ELEMENT, CASE SIZE: .75" L x .30" W x .50" H SUPPLIED WITH A TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-570AT-2 | 70° in ALUMINUM MINIATURE ANGLE BEAM TRANSDUCER , 5MHz, .25" x .25" ELEMENT, CASE SIZE: .750"(19.05mm) L x .330" W(8.4mm) x .500"(12.7mm) H SUPPLIED WITH A TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-575AS | ANGLE BEAM TRANSDUCER, 5MHz 75° IN ALUMINUM .25" x 25" ELEMENT, SIDE MOUNT MICRODOT CONNECTOR. CASE SIZE: (.75"L x .375"W x .50"H). Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-575AT | ANGLE BEAM TRANSDUCER, 5MHz 75° IN ALUMINUM .25" x 25" ELEMENT, TOP MOUNT MICRODOT CONNECTOR. CASE SIZE: (.75"L x .375"W x .50"H). Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-580AT | 80° ALUMINUM 5 MHZ 1/4" X 1/4" TOP MOUNT TRANSDUCER | 1 | |
| AFM-590AS | 90° IN ALUMINUM 5 MHz .25" X .25" SIDE MOUNT MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-590AT | 90° IN ALUMINUM 5 MHz .25" X .25" TOP MOUNT MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFM-650AT | 50° ALUMINUM 6 MHZ 1/4" X 1/4" TOP MOUNT TRANSDUCER | 1 | |
| AFM-670AT | 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 6MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-001/.08 | 2024-T351 ALUMINUM THICKNESS BLOCK 3.0" x 3.0" x .080". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-001/.25 | 2024-T351 ALUMINUM THICKNESS BLOCK 3.0" x 3.0" x .250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-0512A | Eddy Current Hole and Surface Crack Standard: 7075-T651 Aluminum.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000/SA | 12 HOLE REFERENCE STANDARD ALUMINUM WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1000SA-1 | 12 HOLE REFERENCE STANDARD ALUMINUM WITH A .020" MID WALL NOTCH, .030" CORNER NOTCH, .050" CORNER NOTCH, .010" ,.020", .040: .050" SURFACE NOTCH. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1003/2024-T3 | CUSTOM METRIC STEP WEDGE WITH 7 1.0"x1.0" STEPS MADE OF 2024-T3 ALUMINUM. STEP SIZES ( 1.6mm, 2.4mm, 3.2mm, 4.0mm, 4.8mm, 5.6mm, 6.4mm )..+/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1003/5086 | CUSTOM METRIC STEP WEDGE WITH 7 1.0"x1.0" STEPS MADE OF 5086 ALUMINUM. STEP SIZES ( 1.6mm, 2.4mm, 3.2mm, 4.0mm, 4.8mm, 5.6mm, 6.4mm ) +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1003/7075-T6 | CUSTOM METRIC STEP WEDGE WITH 7 1.0"x1.0" STEPS MADE OF 7075-T6 ALUMINUM. STEP SIZES ( 1.6mm, 2.4mm, 3.2mm, 4.0mm, 4.8mm, 5.6mm, 6.4mm )..+/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1006AL | CUSTOM 3 STEP CALIBRATION BLOCK 2024-T3 ALUMINUM, STEP SIZES 1.0" x 2.0" FACE. STEP THICKNESSES OF 0.100", 0.200" and 0.400" +/-.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1010A | BOEING TOOL ST8809C LETTER CODE B 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1010SA | BOEING TOOL ST8809C LETTER CODE A 7075-T73 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1015/2024 | CUSTOM 4 STEP CALIBRATION BLOCK 2024-T3 ALUMINUM, STEP SIZES .75"x.75" FACE WITH STEP THICKNESSES OF .040",.060",.080",.100" +/-.001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1017AL | Custom Eddy Current Hole Standard 7075-T7 Aluminum ( Equivalent substitute for 7010 Aluminum). Hole Sizes 1.77" and 0.58" diameter. EDM flaw size: 0.5mm(.020") x 0.1mm (0.004") +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1025AL | Multi-Hole reference standard. Material: 7075-T6 Aluminum. 12 Holes 3/16", 7/32", 1/4" ,9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" .020" x .020" x .005" Wide ± .002" Through EDM Notches in each hole. Standard also includes 3 surface EDM n | 1 | |
| AFNDT-1030 | CUSTOM BRILE RIVET/ 100 DEGREE COUNTERSINK MULTI HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. BRILE HOLE SIZES: 5/32", 3/16" and 1/4". 100 DEGREE COUNTERSINK HOLE SIZES: 5/32", 3/16", 1/4", 5/16", 3/8". .030"X.030" CORNER / COUNTERSINK EDM NOTCHES. DIM... | 1 | |
| AFNDT-1035/7075 | 5 hole reference standard sizes; 1/4", 5/16", 3/8", 7/16" and1/2" inch diameters.( .030" X .030" x .005" +/-.001" corner EDM notch. 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1071/2024 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 2024 Aluminum. Includes Certification Report for step thickness and Certific | 1 | |
| AFNDT-1071/7075 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm and 1.0mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 7075 Aluminum. Includes Certification Report for step thickness and Certific | 1 | |
| AFNDT-1074AL | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1mm, 3mm, 5mm, 7mm, 9mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum. Includes Certification Report for step thickness and COC of material... | 1 | |
| AFNDT-1075AL | ULTRASONIC TEST BLOCK .100/.500 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1076AL | ULTRASONIC STEP BLOCK .020", .050", .075", .100", .125" 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1090AL | 5 STEP WEDGE .050", .100", .150", .200", .250". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-1095 | 8 STEP THIN WEDGE, STEP SIZES OF .030", 0.040",.050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-1096/6061AL | 9 STEP REFERENCE BLOCK WITH HOLDER. MATERIAL: 6061 ALUMINUM. STEP SIZES: .020",.050",.080", .120", .160" , .200", .300", .500", .750" +/-.010". PAD SIZE = 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2003-1AL | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters.( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) 7075-T6 ALUMINUM. Includes Test Report and Certificate of C | 1 | |
| AFNDT-2004 | EDDY CURRENT SURFACE STANDARD WITH 3 EDM NOTCHES: ( .005", .010", .020" Deep x .004"Wide +/- .002 ), MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2005A | 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and Certificate o | 1 | |
| AFNDT-2006A | 12 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .030" X. 030" x.004" ±.002" WIDE CORNER EDM NOTCH in EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010", .020",... | 1 | |
| AFNDT-2007AL | CUSTOM 4 STEP WEDGE. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .020",.040",.060",.090" +/-.001. PAD SIZE: .75" x .75". Includes Test Report Traceable to NIST. | 1 | |
| AFNDT-2007AL-1 | CUSTOM 4 STEP WEDGE. MATERIAL: 2024-T3 ALUMINUM. STEP SIZES: .020",.040",.060",.090" +/-.001. PAD SIZE: .75" x .75". Includes Test Report Traceable to NIST. | 1 | |
| AFNDT-2008/2024-T6 | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2024-T6 .. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/C | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3 CAST ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2008/F | AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2014-T6 CONDUCTIVITY RANGE 35-40 IACS.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2009AL | 5 STEP WEDGE, 16mm, 17mm, 18mm, 19mm, 20mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2011/7075 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .019", .028", .050", .096", .148", .202", .253", .301", .350" .400" +/-.001". 1.0" x 1.0" Step Pad Face. Material: 7075-T651 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-2030/2014-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2014-T6 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2014-T651 | DDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2014-T651 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2024 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/2024-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.004W +/- .002), MATERIAL: 2024-T6 ALUMINUM. SIZE: 4.0"L x 1.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/6061-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .002), 6061-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance and Material Certification. | 1 | |
| AFNDT-2030/7075-T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2030/7075-T7 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008", .020", .040" (.004"W +/- .002), 7075-T7 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2031/7075 | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.040", .080", .160", .250", .300", .400", .500" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2032/Al | 5 STEP REFERENCE BLOCK ..STEP SIZES 1.0" X 1.0" 7075-T6 ALUMINUM. (400",.450",.500",.550",.600"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2035 | 6 Hole reference standard (Aluminum 7075-T6 with certifications). Hole Sizes: 1.0", 1.125", 1.250" ,1.500", 1.625", 1.750", ( .030 x .030 x .006 +/- .001) Corner EDM Notches and .010, .020, .040 Surface notches).. Includes Test Report and Certificate | 1 | |
| AFNDT-2037/7075T6 | 10 STEP WEDGE SUPPLIED WITH HOLDING BLOCK. STEP SIZES: .040", .080", .120", .160", .200", .240", .280", .320", .360", .400" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2040AL | 4 STEP WEDGE. Material: 2024-T351 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, +/-0.05mm Pad Size: 19mm x 19mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2041/AL | 5 STEP WEDGE 7075-T6 ALUMINUM:(.030",.060",.125",.250",.250, .375" +/-.001 Note**with additional engraving marks of metric conversions on each step.**..(0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm) INCLUDED WITH CERTIFICATION REPORT | 1 | |
| AFNDT-2041/AL-1 | 5 STEP WEDGE 2024-T3 ALUMINUM:(.030",.060",.125",.250",.250, .375" +/-.001 Note**with additional engraving marks of metric conversions on each step.** (0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm). IncludesTest Report Traceable to NIST and Certificate of | 1 | |
| AFNDT-2042/AL | CUSTOM 5 HOLE REFERENCE STANDARD MADE OF 7075-T6 ALUMINUM WITH (0.5mm X 0.5mm +/- .05mm) CORNER EDM FLAWS. HOLE SIZE : 13/64", 19/64", 23/64", 7/16" & 31/64". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2048/2024-T3 | CUSTOM NAVY BLOCK. MATERIAL: 2024-T6 ALUMINUM CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2048/7075T6 | CUSTOM NAVY BLOCK. MATERIAL: 7075-T6 ALUMINUM CONTAINING 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2048/AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. Includes Custom fit Waterproof Case. Includes Test Rep... | 1 | |
| AFNDT-2050AL | MINI ANGLE BEAM ALUMINUM V2 Calibration Block, 7075 Aluminum, Metric (Side Drilled Hole Thickness - 12.5mm. Includes Certificate of Conformance and Material Certification Report. Supplied with wood case. | 1 | |
| AFNDT-2054AL | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .156",.250",.312",.375",.437",.500". CORNER E... | 1 | |
| AFNDT-2054AL-1 | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .156",.250",.312",.375",.437",.500". CORNER E... | 1 | |
| AFNDT-2054AL-2 | CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .125" .156", .187", .250",.375",.500". CORNER... | 1 | |
| AFNDT-2055 | CUSTOM ROTARY BLOCK REFERENCE STANDARD. 10MM, 13MM, 15MM, 17MM , 19MM, .020X.020X.004 +/-.001, ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2058/7075T6 | 6 STEP CALIBRATION BLOCK, CUSTOM, .030", .040", 0.60" , 0.80", .100", .150", 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2062AL | Custom 10 Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 7075-T6 Aluminum. Includes certification Report Traceable to NIST. | 1 | |
| AFNDT-2064/AL | SAFRAN MESSIER-BUGATTI-DOWTY ET SURFACE REFERENCE STANDARD 32-09-01 FIGURE 67,GRAPHIC-32-09-01-041-008-A01. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of conformance. | 1 | |
| AFNDT-2065 | Olympus Aluminum multi-hole reference standard. Contains 5 hole sizes; 7/16, 1/2, 9/16, 3/4 and 1.0" inch hole diameters.( .030" x.030" corner EDM notch in each hole). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2066A | 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .001" WIDE THRU NOTCH. .008", .020", .040" SURFACE NOTCHES. .005" +/-.001". Includes Test Report and | 1 | |
| AFNDT-2067/5086 | 5 STEP ALUMINUM WEDGE .100", .200", .300", .400",.500", 5086Al 1"X1" Sq..1"x5" LONG. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2067/7075T6 | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2067/7075T7 | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 7075-T7 ALUMINUM. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2067AL | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 1.0" X 1.0" TOLEREANCE = +/- .001. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2068 | CUSTOM CORROSION TEST PLATE 7075-T6 ALUMINUM. , 5%, 10%, 20%. PLATE SIZE: 8.0" x 5.0" x .125". 1.0"Ø SPOTFACE 3 PLACES. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2069AL | 13 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: 3/16(.1875), 13/64(.203), 7/32(.218), 15/64(.234),1/4(.250), 17/64(.265), 9/32(.281), 19/64(.297), 5/16(.312),21/64(.328),11/32(.343), 23/64(.359), 3/8(.375). EDM NOTCH: .030" X. 030" x.005" ±.... | 1 | |
| AFNDT-2072AL | 5 STEP ALUMINUM WEDGE. Step Sizes: .600", .700", .800", .900" ,1.00", Tolerance: +/- .001'. Material: 2024-T3 Aluminum. Pad Size: 1.0"X1.0" Sq. 5.0"x1.0" LONG. Includes certification report traceable to NIST. Manufactured in accordance to Airbus A33 | 1 | |
| AFNDT-2073AL | 12 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: 25/64(.390), 13/32(.406), 27/64(.421),7/16(.437), 29/64(..453), 15/32(..468), 31/64(.484),1/2(.500), 33/64(.515),17/32(.531), 35/64(.546), 9/16(.562). EDM NOTCH: .030" X. 030" x.005" ±.001" WIDE... | 1 | |
| AFNDT-2074 | CUSTOM SURFACEREFERENCE STANDARD, 3 EDM SLOTS .008",.020",.040" .007" MAX WIDTH. MATERIAL: 7075-T6 ALUMINUM. SIZE: 4.0 x 1.5 x .25". Includes Test Report and Certifictate of Conformance. | 1 | |
| AFNDT-2075/AL-1 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2075/AL-2 | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2076AL | 10 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. Hole Sizes: 1/8", 5/32", 3/16", 7/32" ,1/4", 9/32", 5/16", 3/8", 7/16", 1/2", .030" X. 030" x.005" +/- .001" WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2077/7075T6 | 5 STEP WEDGE .040", .080", .120", .160", .200" +/-.001", 7075-T6 ALUMINUM .75" x .75" STEP FACE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2078/7075T6 | 5 STEP WEDGE .240", .280", .320", .360", .400" +/-.001", 7075-T6 ALUMINUM 1.0" x 1.0" STEP FACE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2079/2024T3 | 6 STEP CALIBRATION BLOCK, STEP SIZES .030", .100", .250", .500", .750", 1.0" in 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2080AL | 2024-T3 ALUMINUM 6 STEP WEDGE 0.075", 0.100", 0.125, 0.150", 0.175", 0.200" +/-.001 TOLERANCE. Includes Test Report ancd Certificate of Conformance. | 1 | |
| AFNDT-2085/7075-T6 | 6 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(500",.600",.700",.800",.900" and 1.0") +/- .001" 7075-T6 ALUMINUM . Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797... Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/2024-T3 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2088/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2089/7075T6 | 2 STEP WEDGE. STEP SIZE: .500", 1.0", +/-.001". MATERIAL: 7075-T6 ALUMINUM 2.0" x 2.0" PAD SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2090AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2093/7075-T6 | 5 STEP CALIBRATION BLOCK,STEP SIZES 1.0" X1.0"(1.100", 1.200", 1.300", 1.400", 1.500" ) +/- .001" 7075-T6 ALUMINUM. Includes certification Report Traceable to NIST, Meets tolerance for ASTM E797 | 1 | |
| AFNDT-2094AL | 5 STEP WEDGE .550", .600", .650", .700", .750". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2095 | 5 STEP WEDGE W/ BASE, .016", .020", .040", .050", .080", Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2097AL | 7 STEP WEDGE. STEP SIZES: .030", .040", .050", .060", .070", .080", and .090" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2098/2024-T3 | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 25mm x 25mm. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2098/7075T6 | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 25mm x 25mm. Material: 7075-T6 Aluminum Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2098/7175 | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 25mm x 25mm. Material: 7175-T73 Aluminum Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2099/2219-T8 | 5 STEP WEDGE 2219-T851 Aluminum 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 25mm x 25mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2100/AL | 6 STEP STANDARD, .500, .600, .700, .800, .900, 1.00, ALUMINUM 2024-T351. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2100AL | 6 STEP STANDARD, 1MM, 2MM, 4MM, 6MM, 8MM, 10MM, ALUMINUM 2024-T351. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2100AL-1 | 6 Step Wedge, 1MM, 2MM, 4MM, 6MM, 8MM, 10MM ±.001 , 6" x 1" pads, 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2102/2219-T8 | 5 STEP WEDGE 2219-T851 Aluminum 0.5mm, 1.0mm,1.5mm, 2.0mm, 2.5mm +/- 0.05mm, Pad Size: 25mm x 25mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2103AL | METRIC 5 STEP CALIBRATION BLOCK, 7075-T6 ALUMINUM. STEP SIZES: 2.5mm, 5.0mm, 7.5mm, 10.0mm, 12.5mm. PAD SIZE: 1.0" x 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2104/AL | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2105/6061 | 5 STEP BLOCK, .100, .250, .500, .750, 1.00. 6061 ALUMINUM, 3/4X3/4 STEP SIZE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2105AL | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: .75" x .75" TOLEREANCE = +/- .001. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2106 | 3 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM.. HOLE SIZES: 5/32", 3/16", 1/4" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030".N Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2106/2024 | 5 STEP WEDGE .020", .060", .150", .300", .600". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM . PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2106/7075 | 5 STEP WEDGE .020", .060", .150", .300", .600". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM . PAD SIZE: 1.0" x 1.0" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2107/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD. EDM FLAWS: .008", .020", .040" (.005" Maximum Width). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2109 | 15 Hole aluminum reference standard, material 7075-T6, hole sizes: 1/8, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64. With .030 x .030 and .020 x .020 Corner EDM Notches. Includes Test Report and Certificat | 1 | |
| AFNDT-2110 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (SELECTED RIVETS). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.201 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.201" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.500D | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.500" DIAMETER HOLE D SHAPE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.812 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.812" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-.950 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (.950" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2110-1.06 | CUSTOM EDDY CURRENT TEMPLATE.2024-T3 ALUMINUM .063" THICK PLATE. (1.06" DIAMETER HOLE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2113/2024 | 10 PIECE SHIM THICKNESS SET. SHIM SIZE: 0.787" x 0.787". THICKNESSES: .020", .032", .040", .050", .063", .070", .080", .090", .100", .125". Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2113/7075 | 10 PIECE SHIM THICKNESS SET. SHIM SIZE: 0.787" x 0.787". THICKNESSES: .020", .032", .040", .050", .063", .070", .080", .090", .100", .125". Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2114AL | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.006W +/- .001). BLOCK SIZE:3.156 "L x 1.375"W x .312"H. MATERIAL: 2024-T3 ALUMINUM.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2115 | 10 STEP REFERENCE BLOCK .025", .030", .040", .050", .063", .071", .080", .090", .100", .120" +/-.001" 2024-T6 ALUMINUM .75" x .75" STEP PAD. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2117AL | 6 STEP THICKNESS STANDARD. STEP SIZES: .050", .100", .200", .300", .400, .500" +/-.001". PAD SIZE 1.0" x 1.0". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2118 | CUSTOM 6 STEP BLOCK, 0.5mm, 1mm,2mm, 3mm, 4mm, 5mm +/- .05mm . Pad Size: .750" x .750" Material- 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2119AL | 5 STEP WEDGE, 11mm, 12mm, 13mm, 14mm, 15mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2121AL | 5 STEP WEDGE .300", .350", .400", .450", .500". TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-2125/AL | CUSTOM MULTI HOLE ET STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9//16", 5/8", 3/4". EDM NOTCH: .030" x .030" x .005" +/-.002" and .020" x .020" x .005" +/-.002". Includes Test Report and Certificate o | 1 | |
| AFNDT-2127 | SAFRAN MESSIER -BUGATTI-DOWTY REFERENCE STANDARD Material aluminum 7075-T6; Thickness 1/2". - Number of holes 5;- hole diameter 9/16 in, 10/16 in, 11/16 in, 12/16 in, 13/16 in; EDM notch in each hole: thru the thickness, depth and width in according with | 1 | |
| AFNDT-2131 | CUSTOM 6 STEP BLOCK : (1mm, 2mm, 4mm, 6mm, 8mm, 10mm, +/- .05mm thick. total of 6 steps. Material- 2024-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2132/2024-T3 | 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16",19/32", 5/8", 21/32", 11/16", 23/32", 3/4". TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x ... | 1 | |
| AFNDT-2133/7075T6 | 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001. Inclu | 1 | |
| AFNDT-2133AL-1 | 20 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 17/32, 9/16,19/32, 5/8, 21/32, 11/16, 23/32, 3/4. TOTAL OF 20 CORNER EDM NOTCHES .030 x .030 x .005 +/-.001 NOTCH | 1 | |
| AFNDT-2140/7075 | 11 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .030"x.030" CORNER EDM NOTCH IN EACH HOLE.. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2141AL | 12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .030" x .030" CORNER EDM NOTCH and .020" MID-WALL EDM NOTCH IN EACH HOLE. Tolerance: .005" +/-.001". Includes Test Repo | 1 | |
| AFNDT-2142 | 6 STEP WEDGE .200", .300",. 400", .500", .650" , .800" MATERIAL: 7075-T6 ALUMINUM. LENGTH: 0.8" x 4.8". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-2143 | 6 STEP WEDGE .024", .040",. 060", .080", .100" , .150" MATERIAL: 7075-T6 ALUMINUM. LENGTH: 0.8" Wide x 1.1" Long for the first and last step. 0.8" x 1.1" long for the 4 inside steps. Total Length = 5.4" Long. TOLEREANCE = +/- .001. Includes Hold... | 1 | |
| AFNDT-2145AL | Custom calibration standard containing 4 hole sizes of 5mm, 6mm, 8mm and 10mm. Each hole has a .100" x .100" x .005" W +/- .002". Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-2146AL | ALUMINUM CHEM MILL MEASURING STEP WEDGE. MATERIAL: 2024-T3 ANODISED ALUMINUM. STEPS: .024, .028, .031, .035, .039, .044, .048, .052, .056, .059 +/-.002". Includes Test eport and Certificate of Conformance. | 1 | |
| AFNDT-2151AL | EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008", .020", .040" (.005"W + .001"), MATERIAL: 5086 H32 ALUMINUM. (29.0% IACS. SIZE: 80mm(3.15") L +5mm(.197") x 30mm(1.18") W +5mm(.197") x 8mm(.315") THICK +3mm(.118"). Includes Mill Certifica... | 1 | |
| AFNDT-2157AL | 10 STEP REFERENCE BLOCK .025", .030", .040", .050", .063", .071", .080", .090", .100", .120" +/-.001" 7075-T6 ALUMINUM .75" x .75" STEP PAD. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3001 | Embraer 170 reference standard with a .473" diameter hole. Per NDTM PT1 51-00-00-916-802-A , 1.4mm x 1.4mm +/-.05mm long x 0.1mm +/-.05 wide corner EDM notch. Material: 7050-T7 Aluminum. Block size 2.0" x 2.0" x .375". Includes Test Report and Certifica | 1 | |
| AFNDT-3002/2024-T3 | 6 STEP WEDGE .030", .040", .060", .080", .100", .150" +/-.001", 2024-T3 ALUMINUM 0.75" x 0.75" STEP FACE. 6.0" X 1.0" LENGTH INCLUDES HOLDER. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3002/7075-T6 | 6 STEP WEDGE .030", .040", .060", .080", .100", .150" +/-.001", 7075-T6 ALUMINUM 0.75" x 0.75" STEP FACE. 6.0" X 1.0" LENGTH INCLUDES HOLDER. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3008AL | 5 STEP WEDGE .020", .040", .060", .080", .100". TOLERANCE +/-.001". MATERIAL: ANODIZED 2024-T4 ALUMINUM .PAD SIZE: 75" x .75" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3010/2024 | 11 STEP WEDGE STEP THICKNESS OF .050", .100", .200", .300", .400", .500", .600", .700", .800", .900" 1.00" +/-.001" 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3010/7075-T6 | METRIC 10 STEP CALIBRATION BLOCK, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm ± .05mm. Pad Size: 20mm X 20mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3010/7075-T7 | 11 STEP WEDGE. STEP THICKNESS OF , .050", .100", .200", .300", .400", .500", .600", .700", .800" .900", 1.0" +/-.001". Pad Size: .75" x 75" . Material: 7075-T7 ALUMINUM. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3012AL | 9 HOLE REFERENCE STANDARD PER BOEING 737 NTM 51-00-00 PG 9 FIGURE 3 SPECIFICATION. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES, 1.0",1.125",1.250", 1.375", 1.500"", 1.625", 1.750", 1.875", 2.00", .030"x.030" and .020"x.020" CORNER NOTCH .005+/-.002. Includ... | 1 | |
| AFNDT-3013/2024 | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 2024 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013/7075 | 5 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 7075 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3013AL | 6 STEP WEDGE, 0.5mm,1mm, 2mm, 3mm, 4mm, 5mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3014AL | 8 STEP WEDGE, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3015 | EMBRAER 170/190 SERIES EDDY CURRENT SURFACE REFERENCE STANDARD 50-00-00 PT 1 PAGE 4, Aluminum(7075-T6) 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05mm WIDE). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3016-2024T3 | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 Corner EDM Notch and 3 Surface EDM Notches .010", .020", .040" Deep x .750" Long.) Material: 2024-T3 Aluminum. Includes Test Report | 1 | |
| AFNDT-3017/7175 | 5 STEP WEDGE, 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 19mm x 19mm. Material: 7175-T73 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3017AL | 5 STEP WEDGE 2.5mm, 5.0mm,7.5mm, 10.0mm, 12.5mm +/- 0.05mm, Pad Size: 19mm x 19mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3020AL | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .040", .060", .080", .100", .150", .200" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3021AL | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm. (Tolerance: +/- 0.2mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 2024-T3 Aluminum. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3022 | BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7075-T6 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6 ... | 1 | |
| AFNDT-3023 | BOMBARDIER SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 7050-T74 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of Conformance. ( Similar to Specification BD-700 PT 6... | 1 | |
| AFNDT-3024AL | 12 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .004" +/- .002" WIDE THROUGH EDM NOTCH IN EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010"... | 1 | |
| AFNDT-3025AL | Eddy Current Surface Standard 7075-T6 Aluminum. Block Size: 4.0"(101.6mm)L x 1.0"(25.4mm)W x .25"(6.35mm)H. Includes 3 EDM Flaws of the following sizes...1.) (0.5mm)D x (0.25mm)W x (25mm)L..2.) (1.0mm)D x (0.25mm)W x (25mm)L..3.) (2.0mm)D x (0.25mm)W x... | 1 | |
| AFNDT-3026AL | EDDY CURRENT SURFACE REFERENCE STANDARD Leonardo Helicopters SB No. 109EP-158. MATERIAL: 7475-T7 ALUMINUM. SIZE: 1.0" x 3.0" x .25" EDM SLOT (0.5mm DEEP) x (0.05-0.25mm WIDE) +/-.03mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3027AL | MHS style Multi-Hole reference standard (Aluminum 7075-T6 with certifications). 12 Holes 3/16", 7/32", 1/4" ,9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" ( .030 x .030 x .006 +/- .001) Corner Notches and .010, .020, .040 Surface notch... | 1 | |
| AFNDT-3028AL | 3i-Hole reference standard (Aluminum 7075-T6 with certifications). Hole Sizes , 7/16", 1/2" and 11/16" ( .030 x .030 x .006 +/- .001) Corner Notches. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3029/2024 | 6 STEP WEDGE .100", .200",. 300", .400", .500" , .600". MATERIAL: 2024-T3 ALUMINUM. STEP PAD SIZE: .787" x .787". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3029/7075 | 6 STEP WEDGE .100", .200",. 300", .400", .500" , .600". MATERIAL: 7075-T6 ALUMINUM. STEP PAD SIZE: .787" x .787". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3032 | 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 2024-T3 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 5/32", 3/16" and 1/4" TOTAL OF 3 EDM NOTCHES .040" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. | 1 | |
| AFNDT-3032-1 | 3 HOLE 100° COUNTERSINK REFERENCE STANDARD 7075-T6 ALUMINUM, PLATE SIZE: 3.0" x 2.0" x 1/4" . HOLE SIZES: 3/16", 7/32" and 1/4" TOTAL OF 3 CORNER EDM NOTCHES: .030" +0.004"/-0.000" Long x .007" Max Width Through the Depth of the Countersink. Includes Tes | 1 | |
| AFNDT-3036AL | CUSTOM 2 HOLE EDDY CURRENT REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: .250" and .875" WITH a .030" x .030" x .007" MAX WIDTH CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3038 | CUSTOM BOND LINE STANDARD. 3.0" x 6.0" LONG, 2024-T351 ALUMINUM. BOEING BMS 5-101 ADHESIVE. QUANTITY OF 2 0.5" x 0.5" DISBOND VOIDS. | 1 | |
| AFNDT-3039 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045-2024T3 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3045-7075T6 | 10 STEP REFERENCE BLOCK .010", .020", .030", .040", .050", .060", .070", .080", .090", .100", +/-.001" . Material: 7075-T6 ALUMINUM, Pad Size: .75" x 75" with Acetal( Delrin) holding block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3051AL | (Aluminum Multi-hole reference standard with certificate. Contains 2 rows of 6 hole sizes. The first row has no flaws or side drilled holes. The second row includes side drilled holes. Hole Sizes: 3/16", 1/4", 5/16", 3/8", and 1/2". Material: 7075-T6 ... | 1 | |
| AFNDT-3052AL | (Aluminum Multi-hole reference standard with certificate. Contains 2 rows of 29 hole sizes. The first row has no flaws or side drilled holes. The second row includes side drilled holes. Hole Sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32"... | 1 | |
| AFNDT-3053AL | 11 STEP THICKNESS STANDARD. STEP SIZES: .010", .020", .030", .040", .050", .060", .070", .080", .090", ..100", .110" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3056AL | 10 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. Hole Sizes: 3/16", 7/32" ,1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16', 5/8". Corner EDM Notches: .020" x .020" x .005" +/- .001" Wide and Mid-Wall EDM Notches .020" x .020" x .005" +/- .001" Wide in Each... | 1 | |
| AFNDT-3057AL | Custom 3 Step Thin Wedge with Holder. Step Thicknesses: 0.015", 0.030" and 0.070". Pad Size: 1.0" x 1.0" x 3.0" Total Length. Step ThicknessTolerence +/- .001. Material: 7075-T6 Aluminum Also Contains 2 EDM Flaws .010" and .020" Deep x .005" Wide x .3... | 1 | |
| AFNDT-3061AL | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .005", .010", .020" (.004"W +/- .002), 7075-T7 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3064/2024AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3064/6061AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6061-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3064/7075AL | 7 STEP REFERENCE BLOCK WITH ACETAL( DELRIN ) HOLDING BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.020", .040", .060", .080", .100", .150", .200" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3065/2024AL | 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3065/6061AL | 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 6061-T6 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3065/7075AL | 6 STEP REFERENCE BLOCK. STEP PAD SIZE: 1.0" X 1.0". MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.100", .250", .400", .600", .800", 1.00" +/- .002". Includes certification report traceable to NIST. | 1 | |
| AFNDT-3070/7475 | 6 STEP THICKNESS STANDARD. STEP SIZES: .030", .050", .100", .150", .300", .500" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7475-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3070AL | 6 STEP THICKNESS STANDARD. STEP SIZES: .030", .050", .100", .150", .300", .500" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3071 | Custom designed eddy current multi-layer aircraft aluminum skin test specimen, drawing 2, sheets 1-4. reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3072 | Custom designed eddy current aircraft calibration standard, Drawing 3, Sheets 1-3, for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 1 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 2 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3073 TYPE 3 | Custom designed eddy current reference standard for Central Piedmont Community College. Material: 2024-T3 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3074AL | 12 Hole reference standard. Material: 2024-T3 Aluminum. Contains 12 hole sizes; 3/16 inch (4.74mm) 7/32 inch (5.53mm) 1/4 inch (6.35mm) 9/32 inch (7.13mm) 5/16 inch (7.92mm) 11/32 inch (8.71mm) 3/8 inch (9.52mm) 7/16 inch (11.09mm) 1/2 inch (12.7mm) 9/16 | 1 | |
| AFNDT-3076AL | 7 STEP WEDGE, STEP SIZES OF .120", .150", .200", .250", .300", .350", and .400" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 2024-T3 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3076AL-1 | 7 STEP WEDGE, STEP SIZES OF .120", .150", .200", .250", .300", .350", and .400" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3076AL-2 | 7 STEP WEDGE, STEP SIZES OF .120", .150", .200", .250", .300", .350", and .400" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7050-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3077AL | 7 STEP WEDGE, STEP SIZES OF .450", .500", .550", .600", .650", .700", and .750" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 2024-T3 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3077AL-1 | 7 STEP WEDGE, STEP SIZES OF .450", .500", .550", .600", .650", .700", and .750" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3077AL-2 | 7 STEP WEDGE, STEP SIZES OF .450", .500", .550", .600", .650", .700", and .750" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7050-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3078AL | 7 STEP WEDGE, STEP SIZES OF .800", .850", .900", .950", 1.00", 1.50", and 2.00" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 2024-T3 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3079AL | 9 STEP WEDGE, STEP SIZES OF: .020", .030", .040", .050", .060", .070", .080", .090" and .100" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3079AL-1 | 9 STEP WEDGE, STEP SIZES OF: .020", .030", .040", .050", .060", .070", .080", .090" and .100" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7050-T7 ALUMINUM. CLEAR ANODIZED FOR CORROSION PROTECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3081AL | 3 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM.. HOLE SIZES: 5/16", 3/8", 7/16" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3084AL | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: AMS4144 2219-T851 ALUMINUM. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Clear Anodized for corrosion protection. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3100/2024 | CUSTOM THICKNESS STANDARD, 2024-T3 or 2024-T4 ALUMINUM. SIZE: 50mm X 50mm X 10mm +/- 1mm or 1.97" x 1.97" x .397" +/- .039". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3100/6061 | CUSTOM THICKNESS STANDARD, 6061-T3 or 6061-T4 ALUMINUM. SIZE: 50mm X 50mm X 10mm +/- 1mm or 1.97" x 1.97" x .397" +/- .039". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3100/7075 | CUSTOM THICKNESS STANDARD, 7075-T6 or 7075-T7 ALUMINUM. SIZE: 50mm X 50mm X 10mm +/- 1mm or 1.97" x 1.97" x .397" +/- .039". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3102AL/7075 | 9 STEP WEDGE .500", .625",. 750", .875", 1.0" , 1.125", 1.250", 1.375", 1.50". MATERIAL: 7075-T6 ALUMINUM WITH GRAIN DIRECTION. STEP PAD SIZE: 1.0" x 1.0". TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3112 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T3 Aluminum. Plate Size: 2.0" x 4.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112/2014-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2014-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3112/2024-T6 | Custom Bolt hole Standard, Hole Sizes; 1/8", 5/32", 3/16", 1/4", inch diameter Holes. .020" Thru EDM notches .005" Wide(+/- .001"). Material: 2024-T6 Aluminum. Plate Size: 2.0" x 5.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3113 | Custom Bolt hole Standard, Hole Size; 5/8"Ø inch diameter Hole. .020" Thru EDM notch .005" Wide(+/- .001"). Material: 7075-T6 Aluminum. Plate Size: 2.0" x 2.0" x 0.250". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3116 | 16 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. 2 OF EACH HOLE SIZES: 3/16", 13/64" 7/32" , 1/4", 17/64", 9/32", 7/16", 9/16". .030" x .030" CORNER NOTCH IN 1st HOLE SET and .060" x .020" MID-WALL NOTCH IN 2nd HOLE SET. Tolerance: .006" +/-.001". Inclu... | 1 | |
| AFNDT-3119AL | Aluminum Dynamic Split Hole Reference Block. Material: 7075-T651 aluminum. 16 Holes with 1/16" Cross Drilled Holes on both sides. Hole Sizes: 4.5mm, 5.0mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 9.0mm, 10mm, 12mm, 14mm, 16mm, 20mm, 22mm, 24mm. Tolerance +/... | 1 | |
| AFNDT-3120AL | 11 hole Reference Standard 7075-T6 Aluminum. Contains 10 hole sizes; 7/64, 1/8, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 and 1.0 inch diameters.( .030X.030 Corner EDM Notch and 3 Surface EDM Notches at .010", .020", .040" DEEP x .750" LONG.) Includes T... | 1 | |
| AFNDT-3123AL | 7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 2024-T3 ALUMINUM. STEP RANGE:.030", .040", .050", .0600", .070", .080", .090" +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3125AL | Contains 12 hole sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters.( .030X.030 CORNER NOTCH and 3 SURFACE NOTCHES .010", .020", .040" DEEP x .750" LONG.) MATERIAL: 2024-T3 ALUMINUM. Includes Certification Repo... | 1 | |
| AFNDT-3131AL | 5 STEP WEDGE. STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 2024-T3 ALUMINUM. STEP RANGE: .100", .110", .120", .130", .140", +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3132AL | 5 STEP WEDGE. STEP PAD SIZE: 1.0" X 1.0" MATERIAL: 2024-T3 ALUMINUM. STEP RANGE: .150", .160", .170", .180", .190", +/- .001". Includes certification report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3133 | CUSTOM 100° COUNTERSINK BOLT HOLE STANDARD MAUNUFACTURED TO BOEING PART NUMBER 194A, 737 PART 6 53-30-00. MATERIAL: 2024-T3 CLAD ALUMINUM. HOLE SIZES: 2 HOLES 8.6mmØ. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3134AL | 8 STEP WEDGE, STEP SIZES OF .110", .120",.130", .140", .150", .160", .170", and .180" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3135AL | 7 STEP WEDGE, STEP SIZES OF .190", .200", .210", .220", .230", .240", and .250" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3136-7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 7075-T6 Aluminum | 1 | |
| AFNDT-3136/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. ( .030 x .030 and .020 x .020 Corner EDM Notches in each Hole. Material: 2024-T3 Aluminum | 1 | |
| AFNDT-3139AL | 11 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6... | 1 | |
| AFNDT-3140AL | 7 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), With a .020" x .020" x .005" and a .030"x.030" x .005" +/-.002" Corner EDM Notch in each hole Per BOEING Proceedure 51-00-16 PT 6 FIG 3, 14 Notches Tota... | 1 | |
| AFNDT-3141AL | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.125, .156", .187", .250", .281", ..312", .375", .4... | 1 | |
| AFNDT-3141AL-1 | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with .005" max width through EDM notch in holes #1-#6 and a .060"L x .030"D x .005" max width mid-wall notch in holes #7-12, and .030"x.030"x.005" max width corner notch in each hol | 1 | |
| AFNDT-3141AL-2 | Custom McDonnell Douglas 12 bolt hole reference standard 7075-T6 Aluminum with a .060"L x .030Dx .005" max width mid-wall notch, and .030"x.030"x.005" max width corner notch in each hole. Hole sizes (.2966, .3122", .3278", .3434", .359", ..3746", .3902", | 1 | |
| AFNDT-3144AL | 7 STEP WEDGE, STEP SIZES OF .280", .350", .450", .550", .650", .750", and .850" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3147AL | 7 HOLE 100° COUNTERSINK REFERENCE STANDARD 2024-T3 ALUMINUM, PLATE SIZE: 3.0" x 2.5" x 3/8" . HOLE SIZES: 5/32", 3/16", 7/32",1/4", 5/16",3/8", 7/16". TOTAL OF 7 EDM NOTCHES .030" +0.002"/-0.002" Long x .007" Max Width Through the Depth of the Countersin | 1 | |
| AFNDT-3148AL | 13 HOLE REFERENCE STANDARD, 7075-T6 ALUMINUM. HOLE SIZES: 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8" & 1". THRU EDM NOTCHES IN EACH HOLE, Depth: 0.040" +/- 0.001 x Width : 0.005" + 0 - 0.002". Includes Certification R... | 1 | |
| AFNDT-3151AL | 15 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM, HOLE SIZES: 1/8, 5/32, 3/16, 7/32 ,1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4,,7/8,1.0" .030" x .030" CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .750"L x .010",.020",.040" DEEP. Includes Test Report and | 1 | |
| AFNDT-3153/7075T6 | 11 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16), WITH .050"x.050" .005±.001 CORNER EDM NOTCH IN EACH HOLE. | 1 | |
| AFNDT-3156 | Tapered Aluminum Standard. Material: 2024-T351 Aluminum. Taper: 0.039"-0.164". Dimensions: 1" x 4" x .25". Slot width = 0.75". Includes Test Report. | 1 | |
| AFNDT-3157 | Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8" wide groove separates the blocks two sides to facilitate side-... | 1 | |
| AFNDT-3159AL | 8 HOLE REFERENCE STANDARD, MATERIAL: 2024-T3 ALUMINUM., HOLE SIZES: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", .020" THROUGH NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3160AL | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and Certificate of... | 1 | |
| AFNDT-3160AL-1 | BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), DEPTH TOLERANCE = +/- .001"(+/- .003mm). MATERIAL 6061-T6 ALUMINUM, IACS 40.00-44.80. SIZE: 1.5"W x 3.75"L x .25". Includes Test Report and | 1 | |
| AFNDT-3164AL | Custom NDI standard for F-15C/D inspection. Material: 2124-T8 Aluminum. Includes Certification Report Traceable to NIST. | 1 | |
| AFNDT-3166AL | CUSTOM 13 HOLE REFERENCE 3 PLATE STANDARD, 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3171AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055", .063", .071", .080", .090", .100", .110", .115", .120" .125" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3172AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .012", .016", .020", .025", .032", .036", .040", .045", .050" .055" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3172AL-2 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .012", .016", .020", .025", .032", .036", .040", .045", .050" .055" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3172CS | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .012", .016", .020", .025", .032", .036", .040", .045", .050" .055" +/-.001" Pad Size: .75" x 75" . Material: 4130 Carbon Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3173AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055", .063", .071", .080", .090", .100", .110", .115", .120" .125" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3173AL-2 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055", .063", .071", .080", .090", .100", .110", .115", .120" .125" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3173CS | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055", .063", .071", .080", .090", .100", .110", .115", .120" .125" +/-.001" Pad Size: .75" x 75" . Material: 4130 Carbon Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3174AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .125", .135", .145", .150", .160", .170", .180", .190", .200" .225" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3174AL-2 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .125", .135", .145", .150", .160", .170", .180", .190", .200" .225" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3174CS | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .125", .135", .145", .150", .160", .170", .180", .190", .200" .225" +/-.001" Pad Size: .75" x 75" . Material: 4340M Carbon Steel. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3175AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)...- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)...- Surface Finish: Ra 0.8 µm (32 µin) max...- Includes Certification Report a... | 1 | |
| AFNDT-3176AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .250", .300", .350", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3176AL-2 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .250", .300", .350", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3177AL | BOMBARDIER 10 STEP ALUMINUM WEDGE, PT 4 FIG. 2 PAGE 8. STEP THICKNESSES:, .024", .028", .031", .035", .039", .044", .048", .052", .056" .059" X.XXX +/-0.002, X.XX +/-0.010". PAD SIZE: 1.0" x 1.0", Material: 2024-T3 Aluminum. Chromic anodize and 1 coat | 1 | |
| AFNDT-3178AL | Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3178AL-1 | Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3179AL | 100° Countersink Multi Hole Standard. Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 2024-T3 Aluminum. Includes Test Report and Certificat | 1 | |
| AFNDT-3180 | 6 FLAT BOTTOM HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. Hole Sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" .060" LONG X. 020" x DEEP x .005" WIDE +/- .001" WIDE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3181AL | 8 Step Calibration Block, Material 2024-T3 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 5.0mm, 7.5mm, 10mm. (Tolerance: +/-0.02mm).- Pad Size: 20mm x 20mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3182AL | 5 STEP WEDGE. STEP SIZES: .040", .100", .150", .250", .350". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM . PAD SIZE: .75" x .75" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3187AL | METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Per Airbus Procedure A 51-10-04. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3189AL | 11 HOLE REFERENCE STANDARD IN 2024-T3 ALUMINUM; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .020" x .020" x .005" +/-.001" CORNER EDM NOTCH IN EACH HOLE. Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3190AL | 7 STEP WEDGE. STEP SIZES: .030", .115", .200", .285", .370", .455", and .540" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3191AL | 7 STEP WEDGE. STEP SIZES: .030", .115", .200", .285", .370", .455", and .540" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3192AL | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 7075-T6 ALUMINUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3193AL | 10 STEP REFERENCE BLOCK .020", .040", .060", .080", .100", .120", .140", .160", .180", .200" +/-.001" 2024-T3 ALUMINUM .75" x .75" STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3196AL | CUSTOM 4 STEP WEDGE. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .250",.500",.750", 1.000" +/-.001. PAD SIZE: .75" x .75". Includes Test Report Traceable to NIST. | 1 | |
| AFNDT-3199AL | 7 STEP REFERENCE BLOCK. STEP SIZES: .025",.040", .063", .071", .100",.125",.200" +/-.001". MATERIAL: 2024-T6 ALUMINUM. PAD SIZE: .75"x.75" .Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3201A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 11.3mm(.445")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3202A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 14.3mm(.563")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3203A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.1mm(.594")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3204/7075 | 8 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (1/8, 5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), WITH .020"x.020" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3204A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.9mm(.626")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3205A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.0mm(.630")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3206A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.3mm(.642")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3207A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.7mm(.657")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3208A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 17.5mm(.689")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3209A | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 19.3mm(.760")Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030" x .030" x .004" +/- .001" EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Co... | 1 | |
| AFNDT-3210 | SURFACE REFERENCE STANDARD, ONE EDM NOTCH .030" Deep x .040" wide x .060 long ( +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 2.0"L x 2.0"W x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3211 | ALUMINUM TO ALUMINUM BONDED STANDARD. MATERIAL: 2024-T3 ALUMINUM, .063"/.040" WITH A 1.0" DISBOND. SIZE: 4.0" X 4.0". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3212AL | 13 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 23/32". EACH HOLE CONTAINS A CORNER EDM NOTCH 030" x .030" x Width : 0.005" +/- 0.002". Includes Certif... | 1 | |
| AFNDT-3213AL | 2024-T3 Aluminum hole standard, hole diameter 5/32", notch type .030 x .030" Coner Notch". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3214AL | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .100", .200", .300", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST. | 1 | |
| AFNDT-3214AL-1 | 10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .100", .200", .300", .400", .500", .600", .700", .800", .900" 1.000" +/-.001" Pad Size: .75" x 75" . Material: AMS 4144, 2219-T8 Aluminum. Includes Certification Report traceable to NIST. Supply with MILL cert | 1 | |
| AFNDT-3215AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 5/32", 3/16", 1/4", 7/32", 9/32" 5/16" , 11/32", 3/8" ,7/16", 1/2", 9/16", 5/8", 3/4". EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030" x 0.030" a... | 1 | |
| AFNDT-3217AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 29 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", ... | 1 | |
| AFNDT-3218AL | CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64... | 1 | |
| AFNDT-3219AL | CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020" x .020" x .005" +/- .002 " and .030" x .030" x .005" +/- .002" HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/6... | 1 | |
| AFNDT-3225AL | 12 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .004" +/- .002" WIDE THROUGH EDM NOTCH IN EACH HOLE and 3 SURFACE EDM NOTCHES .750" LONG .010"... | 1 | |
| AFNDT-3226AL | Custom Metric 6 Step Block. Step Thicknesses of 2mm, 4mm, 6mm, 8mm, 10mm, 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance. | 1 | |
| AFNDT-3227/7175 | Custom Metric 7 Step Block. Step Thicknesses of 12.5mm, 14mm, 16mm, 18mm, 20mm, 22.mm, 25mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm x 19mm. Material: 7175-T73 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance. | 1 | |
| AFNDT-3227AL | Custom Metric 7 Step Block. Step Thicknesses of 12.5mm, 14mm, 16mm, 18mm, 20mm, 22.mm, 25mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm x 19mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness and Certificate of Conformance. | 1 | |
| AFNDT-3228AL-1 | 8 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3228AL-2 | 8 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3229AL | BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 3/16", 1/4", 7/32", 9/32" 5/16" , 11/32", 3/8" ,7/16", 1/2", 9/16", 5/8", 3/4". EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030" x 0.030" and 0.02... | 1 | |
| AFNDT-3230A | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 5/16" (.312")Ø Contains one EDM Corner Notch .050" x .050" +/- .001", and one EDM Surface Notch .750" long x .020 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Test Rep... | 1 | |
| AFNDT-3231 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum. Fasteners: (NAS1097AD6-5 & BACB30NW6K3). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3231-1 | Custom McDonnell Douglas Low Frequency Eddy Current reference standard, 06-20-01 Figure 9 sheets 1-4. Material: 2024-T3 or 7075-T6 Aluminum.Fasteners: (CR3223-5 & MS21141-5). Includes Test Report and Certificate of Confromance. | 1 | |
| AFNDT-3232F | Custom Hole Standard 2.0" x 2.0" x .25" Square. Material: Forged Aluminum. Hole Size: 16.5mm. EDM Corner Notch: .05mm x .05mm x .1mm Wide +/- 0.05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3233F | Custom Eddy Current Surface Standard. Size: 80mm x 35mm x 7mm. Material: Forged Aluminum. EDM Notch: .060" Long x .004" Wide x .030" Deep +/- 0.002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3237AL | Custom Thin 8-Step Calibration Block, 7075 Aluminum (.030, .040, .050, .060, .070, .080, .090 .100"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3238AL | Contains 13 hole sizes; 1/8, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters. EDM: ( .030 X .030 X .005 +/- .002) CORNER NOTCH and ( .020 X .005 +/- .002) THRU NOTCH. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report a | 1 | |
| AFNDT-3239AL | 3 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM. HOLE SIZES: 1/4", 5/16", 3/8" TOTAL OF 3 EDM CORNER NOTCHES .030" x .030". 3 EDM SURFACE NOTCHES 0.008", 0.020", 0.040". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3240AL | Aluminum multi-hole reference standard. Contains 5 hole sizes; 1/8, 5/32, 3/16, 7/32 and 1/4" inch hole diameters.( .030" x.030" corner EDM notch in each hole). Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3241AL | Aluminum Multi-hole reference standard. Material: 7075-T6 Aluminum. Contains 20 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 1.0" inch. Each hole contains on the | 1 | |
| AFNDT-3243AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3244AL | 8 STEP WEDGE, 2mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3245AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3246AL | 8 STEP WEDGE, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3247AL-1 | 8 STEP WEDGE, 1mm (.0394), 3mm (.1181), 5mm (.1968), 8mm (.3149), 10mm (.3937), 15mm (.5905), 20mm (.7874), 25mm (.9842) +/- .01mm. Material: 7075-T6 Aluminum. Material Thickness: .984, Steps: .984x.984, Length: 7.874 Includes Test Report Traceable to | 1 | |
| AFNDT-3248AL | Custom Metric 6 Step Block. Step Thicknesses of 0.4mm, 0.7mm, 1.0mm, 1.3mm, 1.6mm, 2.0mm. (Tolerance: +/- 0.05mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3250/2024T3 | 12 Hole Calibration Standard, Hole Sizes; 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" inch diameters. ( .030 x .030 Corner and .020 x .020 Midwall EDM Notches in each Hole. Material: 2024-T3 Aluminum | 1 | |
| AFNDT-3251AL | 12 HOLE REFERENCE STANDARD 2024-T3 ALUMINUM. HOLE SIZES: 1/8", 3/16" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8",11/16", 3/4", 13/16" .030" x .030" CORNER NOTCH and .020" x .020" CORNER NOTCH IN EACH HOLE. Tolerance: .005" +/-.001", 4 SURFACE EDM NOTCH | 1 | |
| AFNDT-3252AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3253AL | 9 STEP WEDGE, 0.38mm, 0.64mm, 0.89mm, 1.14mm, 1.40mm, 1.65mm, 1.91mm, 2.16mm, 2.41mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square. Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Confo | 1 | |
| AFNDT-3254AL | Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameters = 2 Holes 22.23mm(.875")Ø, and 25.4mm(1.0")Ø. EDM Flaws:.030" x .030" x .005" +/- .001" Corner EDM Notch. Block Size = 3.0" x 1.5" x .25". Includes Test Report and Certificate of Con | 1 | |
| AFNDT-3255AL | 11 HOLE REFERENCE STANDARD in 7075-T6 Aluminum; Hole Sizes: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), With a .020" x .020" x .005" +/-.002" Corner EDM Notch in each hole. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3256/2024-T3 | 8 STEP WEDGE, 0.51mm (.020"), 0.64mm (.025"), 0.76mm (..030"), 0.91mm (.036"), 1.02mm (.040"), 1.14mm (.045"), 1.27mm (.050"), 1.42mm (.056") +/- .01mm. Material: 2024-T3 Aluminum. Step Pad Size: .25mm x .25mm, Overall Length: 7.874 Includes Test Repor | 1 | |
| AFNDT-3256/7075-T6 | 8 STEP WEDGE, 0.51mm (.020"), 0.64mm (.025"), 0.76mm (..030"), 0.91mm (.036"), 1.02mm (.040"), 1.14mm (.045"), 1.27mm (.050"), 1.42mm (.056") +/- .01mm. Material: 7075-T6 Aluminum. Step Pad Size: .25mm x .25mm, Overall Length: 7.874 Includes Test Repor | 1 | |
| AFNDT-3257/2024-T3 | 8 STEP WEDGE, 1.60mm (.063"), 1.80mm (.071"), 2.03mm (..080"), 2.31mm (.091"), 2.54mm (.100"), 3.0mm (.118"), 3.18mm (.125"), 3.56mm (.140") +/- .01mm. Material: 2024-T3 Aluminum. Step Pad Size: .25mm x .25mm, Overall Length: 7.874 Includes Test Report | 1 | |
| AFNDT-3257/7075-T6 | 8 STEP WEDGE, 1.60mm (.063"), 1.80mm (.071"), 2.03mm (..080"), 2.31mm (.091"), 2.54mm (.100"), 3.0mm (.118"), 3.18mm (.125"), 3.56mm (.140") +/- .01mm. Material: 7075-T6 Aluminum. Step Pad Size: .25mm x .25mm, Overall Length: 7.874 Includes Test Report | 1 | |
| AFNDT-3260AL | Olympus Style Aluminum multi-hole reference standard. Contains 5 hole sizes; 2.0mm, 2.5mm, 3.0mm, 3.5 and 4.0mm hole diameters. EDM notch 0.5mm deep in each hole, length is half of the material thickness. Material: 7075-T76 Aluminum 15mm Thick. Includes T | 1 | |
| AFNDT-3261AL | Olympus Style Aluminum multi-hole reference standard. Contains 11 hole sizes; 16.5mm, 17.0mm, 17.5mm, 18.0mm, 18.5mm, 19.0mm, 19.5mm, 20.0mm, 20.5mm, 21.0mm, and 21.5mm hole diameters. EDM notch = 0.5mm corner EDM notch and 0.5mm deep in each hole, length | 1 | |
| AFNDT-3262AL | Olympus Style Aluminum multi-hole reference standard. Contains 21 hole sizes; 4.0mm, 4.5mm 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm and 16.0mm hole diameters. EDM | 1 | |
| AFNDT-3262TI | Olympus Style Aluminum multi-hole reference standard. Contains 21 hole sizes; 4.0mm, 4.5mm 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 13.0mm, 14.0mm, 15.0mm and 16.0mm hole diameters. EDM | 1 | |
| AFNDT-3270AL | Aluminum Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 3 | 1 | |
| AFNDT-3271AL | Aluminum Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 3 | 1 | |
| AFNDT-3273TI | Aluminum Multi-hole reference standard. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/8", 29/32", 15/16", 3 | 1 | |
| AFNDT-3275 | Custom Metric 7 Step Block Per ASTM E797/E797M-15. Step Thicknesses of .50mm, 1.00mm, 2.00mm, 4.00mm, 6.00mm, 8.00mm, 10.00mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 7075-T6 ALUMINUM. Includes Certification Report for step thickness | 1 | |
| AFNDT-3276 | Custom Metric 7 Step Block Per ASTM E797/E797M-15. Step Thicknesses of .50mm, 1.00mm, 2.00mm, 4.00mm, 6.00mm, 8.00mm, 10.00mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 2024-T3 ALUMINUM. Includes Certification Report for step thickness, | 1 | |
| AFNDT-3281 | 5 STEP WEDGE .100", .200",. 300", .400", .500" +/- .001. MATERIAL: 2219-T851 ALUMINUM. PAD SIZE: .75" L +/- .002 x .75" W +/- .005 TOLEREANCE. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3287AL | Custom multi-hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes T | 1 | |
| AFNDT-3288AL | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: ASTM E 797 7075 ALUMINUM. PAD SIZE: .75" X .75" TOLEREANCE = +/- .001. Clear Anodized for corrosion protection. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3289AL | Custom Metric 6 Step Block. Step Thicknesses of 1.0mm, 1.2mm, 1.4mm, and1.6mm. (Tolerance: +/- 0.02mm). Pad Size: 15mm X 15mm, (Tolerance: +/- 0.5mm) Material: 7075-T6 Aluminum with Delrin Holding Block. Includes Certification Report and Certificate | 1 | |
| AFNDT-3290AL | Custom ST Aerospace Engineering Multi-Hole Standard 2 Plate Assembly, Manufactured to the Customer Supplied Drawing Specifications . Material: 7075-T6 Aluminum. 6 Total Hole Sizes to be determined. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3291AL | BOMBARDIER 15 HOLE METRIC REFERENCE STANDARD. CL-215T PART 6 PAGE 8 FIGURE 5 GENERAL. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM, 18MM diameters. Includes 15 Thru EDM Notches 0.040 | 1 | |
| AFNDT-3299/7075-T6 | 12 HOLE REFERENCE STANDARD . HOLE SIZES: 1/8", 5/32", 3/16", 7/32" 1/4" , 5/16", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .005" +/- .002" WIDE MID-WALL EDM NOTCH. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3301/2024-T3 | 8 STEP WEDGE, Step Sizes: 0.6mm,1.2mm,1.4mm,1.6mm,1.8mm, 2.0mm,2.2mm,2.4mm; MATERIAL: 2024-T3 ALUMINUM. LENGTH: 20mm Wide x 28mm Long for the first and last step. 20mm x 20mm long for the 6 inside steps. Total Length=176mm Long. TOLERANCE = +/- 0.05mm. Su | 1 | |
| AFNDT-3301/7075-T6 | 8 STEP WEDGE, Step Sizes: 0.6mm,1.2mm,1.4mm,1.6mm,1.8mm, 2.0mm,2.2mm,2.4mm; MATERIAL: 7075-T6 ALUMINUM. LENGTH: 20mm Wide x 28mm Long for the first and last step. 20mm x 20mm long for the 6 inside steps. Total Length=176mm Long. TOLERANCE = +/- 0.05mm. Su | 1 | |
| AFNDT-3302//7075-T6 | 8 STEP WEDGE:3.0mm,3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,6.0mm,7.0mm; MATERIAL: 7075-T6 ALUMINUM. LENGTH: 20mm x 160mm. TOLERANCE = +/- 0.05mm. Supplied with Holder. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3302/2024-T3 | 8 STEP WEDGE:3.0mm,3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,6.0mm,7.0mm; MATERIAL: 2024-T3 ALUMINUM. LENGTH: 20mm x 160mm. TOLERANCE = +/- 0.05mm. Supplied with Holder. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3303AL | SINGLE HOLE REFERENCE STANDARD 2024-T3 ALUMINUM, HOLE SIZE 3/8"( .375) EDM CORNER NOTCHES .030" x .030". BLOCK SIZE: 2.0" x 2.0" x 1/4" Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3304/7075-T6 | 12 Hole reference standard. Material: 7075-T6 Aluminum. Contains 12 hole sizes; 3/16 inch (4.74mm) 7/32 inch (5.53mm) 1/4 inch (6.35mm) 9/32 inch (7.13mm) 5/16 inch (7.92mm) 11/32 inch (8.71mm) 3/8 inch (9.52mm) 7/16 inch (11.09mm) 1/2 inch (12.7mm) 9/16 | 1 | |
| AFNDT-3305AL | Custom 2 Hole Standard. Material: 7075-T6 Aluminum, Block Size: ..250" x 2.0" x 4.0" . HOLE SIZES:.098" and .188" Diameter with Type A% EDM Notch: .035" x .035" x .004" W ±.001". Includes Test Report and Certificate of Conformance Traceable to NIST. | 1 | |
| AFNDT-3306/2024T3 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 2024-T3 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3306/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, METRIC NOTCHE SIZES: 0.2mm, 0.5mm &1.0mm. WIDTH = .005" +/- .002" MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3307 | Custom 8 Hole Standard Manufactured to the Specifications of ATR Part Number 98S51605001-218, Part 6 51-60-00 Figure 616 Sheet 1. Material: 2024-T3 Aluminum, Block Size: .390" x 4.4" x 4.4"(10mm x 111.8mm x 111.8mm) . HOLE SIZES: 2.5mm and 3.2mm. Include | 1 | |
| AFNDT-3309AL | Custom Thin Plate Surface Standard. 7075-T76 Aluminum 10.0" x 10.0" x .050". 3 Surface EDM Notches ±.001" on Width. 1.) 0.010" x 0.200" x .004"W 2.) 0.015" x 0.200" x .004"W 3.) 0.020" x 0.200" x .004"W. Includes Test Report and Certificate of Conform | 1 | |
| AFNDT-3312AL | 12 HOLE REFERENCE STANDARD, 7075-T6 Aluminum. HOLE SIZES: 3/16", 7/32" 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" 5/8", 3/4" .020" x .004" +/- .001" Wide Thru EDM Notch. A Total of 4 Surface EDM Notches .005", .010" .020", .040" Tolerance: . | 1 | |
| AFNDT-3315AL | EDDY CURRENT SURFACE REFERENCE STANDARD, 4 EDM NOTCHES .005", .010", .020" and .050" x (.004"W +/- .002). MATERIAL: 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3316AL | Custom Bolt Hole Calibration Block, 2024-T3 Aluminum. Hole Diameter 3/8" (.375")Ø Contains one EDM Corner Notch .030" x .030" +/- .001", and one EDM Radius Thumbnail Notch .120" long x .030 deep +/- .001 . Block Size = 2.0" x 2.0" x .25". Includes Tes | 1 | |
| AFNDT-3317/7075 | 6 STEP WEDGE, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm +/- .05mm. Material: 7075 Aluminum. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3318/7075-T6 | 5 STEP WEDGE .500", .600",. 700", .800", 1.00" MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: .75" X .75" TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3320AL | 6 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-02 Part 6 Procedure 1 or 2. Hole Sizes: 15/32", 17/32", 9/16", 11/16", 5/8", 3/4" ( .020" x .020" x .005" +/- .002), ( .030" x .030" x .005" +/- .002 | 1 | |
| AFNDT-3321AL | 5 Hole reference standard (Aluminum 7075-T6 manufactured in accordance with Boeing Specification 51-00-16 Part 6 Page 9 Figure 3. Hole Sizes: 11.5mm, 14.4mm, 14.6mm, 17.4mm and 17.5mm. Corner EDM Notches ( .020" x .020" x .005" +/- .002), ( .030" x .0 | 1 | |
| AFNDT-3331AL | 5 STEP WEDGE .750", 1.000", 1.250", 1.500", 2.000". TOLERANCE +/-.001". MATERIAL: 2219-T8 ALUMINUM, CLEAR ANODIZED. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3334AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3334AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .040", .063", .100", .150", .200", .300" in 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3335/2024-T3 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 2024-T351. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and C | 1 | |
| AFNDT-3335/7075-T6 | Custom Metric 7 Step Thickness Measurement Calibration Block Per ASTM E797 / E797M-15. Material: Aluminum 7075-T6. Step Thicknesses of: 1, 3, 5, 10, 15, 20 & 25mm. Pad Size: 20mm ±1mm x 20mm ±0.5mm. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3337AL | 5 STEP WEDGE .020", .030", .040", .050", .060". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3341AL | 9 STEP REFERENCE BLOCK WITH ACETAL(DELRIN) HOLDING BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .030",.050",.080", .120", .160" , .200", .300", .400", .500" +/-.001". PAD SIZE = .75" x .75". Supplied with Delrin(Acetal) Holding Block. Includes Test Repo | 1 | |
| AFNDT-3342AL | 6 STEP WEDGE, STEP SIZES: .500", 1.000", 1.500", 2.000", 2.500", 3.000. TOLERANCE +/-.001". MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 750" x .750" . Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3343/2024T3 | 6 STEP WEDGE .010", .030", .050", .070", .090", .125" +/-.001", 2024-T3 ALUMINUM 0.75" x 0.75" STEP PAD. SUPPLIED WITH HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3343/7075T6 | 6 STEP WEDGE .010", .030", .050", .070", .090", .125" +/-.001", 7075-T6 ALUMINUM 0.75" x 0.75" STEP PAD. SUPPLIED WITH HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3344/2024T3 | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 1.00" X 1.00" TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3344/7075T6 | 5 STEP WEDGE .100", .200",. 300", .400", .500" MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: 1.00" X 1.00" TOLERANCE = +/- .001. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3345AL | 5 STEP THICKNESS STANDARD. STEP SIZES: .020", .050", .100", .150", .200", +/-.002". MATERIAL: 2024-T3 ALUMINUM. SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3348/2024T3 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 2024-T351 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3348/7075T6 | 7 STEP METRIC WEDGE: Step Sizes: 1mm, 3mm, 5mm, 10mm, 15mm, 20mm, 25mm +/- .05mm . Pad Size: 20mm x 20mm. Supplied With Holding Block. Material- 7075-T6 Aluminum (Surface Anodized for Corrosion Protection). Includes Test Report and Certificate of Conforma | 1 | |
| AFNDT-3350AL | 5 STEP WEDGE .020", .030", .040", .080", .090". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3351AL | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3351AL-1 | 8 STEP THICKNESS STANDARD. STEP SIZES: .015", .020", .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 Aluminum. Supplied with Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3354/2024-T3 | METRIC 5 STEP WEDGE, 5mm, 10mm, 15mm, 20mm, 25mm, +/- .05mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3354/7075-T6 | METRIC 5 STEP WEDGE, 5mm, 10mm, 15mm, 20mm, 25mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3357/2024T4 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008"(0.2mm), .020"(0.5mm), .040"(1.0mm) (.004"W +/- .001), 2024-T4 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance and Material Certification. | 1 | |
| AFNDT-3361/2024 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm X 20mm, (Tolerance: +/- 0.5mm) Material: 2024-T3 Aluminum. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3361/7050 | Custom Metric 6 Step Block. Step Thicknesses of 0.5mm, 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm X 20mm, (Tolerance: +/- 0.5mm) Material: 7050-T7 Aluminum. Includes Certification Report for step thickness and Cer | 1 | |
| AFNDT-3363 | 11 STEP THICKNESS STANDARD. STEP SIZES: .100", .150", .200", .250", .300", .350", .400", .450", .500", ..550", .600" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3364 | 11 STEP THICKNESS STANDARD. STEP SIZES: .100", .150", .200", .250", .300", .350", .400", .450", .500", ..550", .600" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3365 | 8 STEP WEDGE, STEP SIZES OF .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: .75 x .75 MATERIAL: AMS 4144, 2219-T8 ALUMINUM. Includes Test Report and Certificate of Conformance. Supply with MILL certificate. | 1 | |
| AFNDT-3369/7075T6 | Custom 8 hole 100° countersink reference standard Material: 7075-T6 Aluminum. Hole sizes: 5/32", 3/16", 7/32" 1/4", 5/16", 3/8", 7/16", 1/2". Countersink holes opposite side. Thru hole EDM notches in each hole, .020" Deep x .005" Wide +/-.001". Includes | 1 | |
| AFNDT-3370/7075T6 | EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010"(0.25mm), .020"(0.5mm), .030"(0.76mm) (.004"W +/- .002), 7075-T6 ALUMINUM. SIZE: 1.0"W x 4.0"L x .25". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3385/2024T3 | 12 STEP WEDGE, STEP THICKNESS: .024", .040", .060", .080", .100", .150", .200", .300", .400", .500" .650", .800" +/-.001" 2024-T3 ALUMINUM SUPPLIED WITH A DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3385/7075T6 | 12 STEP WEDGE, STEP THICKNESS: .024", .040", .060", .080", .100", .150", .200", .300", .400", .500" .650", .800" +/-.001" 7075-T6 ALUMINUM SUPPLIED WITH A DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3386/7075T6 | 12 Hole Calibration Standard, Hole Sizes; 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 and 3/4 inch diameters, .040 x .005 ±.002" Through EDM Notches in each Hole. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Confor | 1 | |
| AFNDT-3387AL | 6 Hole Metric reference standard. Material: 7075-T6 Aluminum. Hole Sizes: 20mm, 21mm, 22mm, 23mm, 24mm and 25mm. Corner EDM Notches: 1mm x 1mm x .15mm(.039" x .039" x .006"±.001"). Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3388AL | Custom Metric 7 Step Block. Step Thicknesses: 0.5mm, 2.5mm, 4.5mm, 6.5mm, 8.5mm, 10.5mm & 12.5mm. (Tolerance: +/- 0.02mm). Pad Size: 20mm x 20mm. Material: 2024-T3 ALUMINUM. Supplied with Delrin Holding Block. Includes Certification Report for step thi | 1 | |
| AFNDT-3394AL | 8 STEP WEDGE, STEP SIZES OF .015", .025",.040", .060", .080", .100", .150", and .200" +/- .001". PAD SIZE: .75"x.75", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3395 | CUSTOM EC SKIN INSPECTION REFERENCE STANDARD. Contains various EDM Nothes in the Upper and Lower Skin. Upper Skin Thickness of .080" and Lower Skin Thickness of .100" Thick. Standard Physical Size = 13.5" Long x 5.15" Wide. MATERIAL: 2024-T3 ALUMINUM. I | 1 | |
| AFNDT-3398AL | 9 STEP THICKNESS STANDARD. STEP SIZES: .020", .030", .040", .050", .060", .070", .080", .090", .100" +/-.001". PAD SIZE 0.75" x 0.75". MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certifica | 1 | |
| AFNDT-3401AL | 7 STEP WEDGE. STEP SIZES: .040", .050", .060", .070", .080", .090", .100" +/- .001". PAD SIZE: 1.0"x 1.0", MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3402AL | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3402AL-1 | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3402TI | Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner | 1 | |
| AFNDT-3404AL | 5 STEP WEDGE .030", .050", .070", .090", .110". TOLERANCE +/-.001". MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75" x .75". Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3406AL | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035", .040". MATERIAL: 2024-T3 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3406AL-1 | 6 STEP CALIBRATION BLOCK, STEP SIZES .015", .020", .025", .030", .035" .040". MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1" X 1" X 6" ± .001". Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3407AL | Aluminum Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16" (4.7625), 7/32" (5.55625), 1/4" (6.35), 9/32" (7.14375), 5/16" (7.9375), 11/32" (8.73125), 3/8" (9.525), 7/16" (11.1125), 1/2" (12.7), 9 | 1 | |
| AFNDT-3409AL | 9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3410AL | CUSTOM 5 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF 0.020", 0.040",0.060", .080", .100 +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3412 | Custom Eddy Current Surface Standard with a Total of 12 EDM Notches. Notch Lenghs of .125, .250", .375" and .625". Notch Depths of .008", .020", and .040" for each length. Material: Nickel Aluminum Bronze. Includes Test Report and Certificate of Conforman | 1 | |
| AFNDT-3413 | Custom Boeing Eddy Current Hole Standard. Hole Sizes: .159 & .190"Ø. With one of each hole size plugged. Material: 2024-T3 Aluminum. Plugged holes contain a BACR15BA6A8C Rivet in the .056" plate. Apply BMS 545 sealant between each layer Includes Test Repo | 1 | |
| AFNDT-3415 | CUSTOM 6 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF .025", .030", .035", .040", .045", .050" +/-.001". PAD SIZE 1.0" x 1.0" . Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T3 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/2024T42 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3417/7075T6 | 5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T3 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/2024T42 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3418/7075T6 | 8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3421/7075T6 | 12 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (5/32, 3/16, 7/32,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH A .020"x.020" and .030"x.030" CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3423 | Eddy Current Reference Standard. Dimensions: 4" x 0.25" x 1" Material: Aluminum 7075-T7. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3428 | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. 3 EDM NOTCH SIZES: 2.0mm(.078") LONG x 0.1mm(.0039") WIDE x 0.25mm(.010") DEEP. 6.35mm(.25") LONG x 0.1mm(.0039") WIDE x 0.5mm(.019") DEEP. 1.5mm(.059") LONG x 0.1mm(.0039") WIDE x 0.76mm(. | 1 | |
| AFNDT-3430 | CUSTOM HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2" PLATE. Holes diameters: 5/32", 6/32", 13/64", 8/32", 17/64". 1st row - holes without defects. 2nd row - holes with Corner notch - 0.5 mm. 3d row - holes with Full length thru notch - 0.5 mm depth. 4th | 1 | |
| AFNDT-3430-1 | CUSTOM METRIC HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2" PLATE. Holes diameters: 4 mm, 5 mm, 6 mm, 7 mm.. 1st row - holes without defects. 2nd row - holes with Corner notch - 0.5 mm. 3d row - holes with Full length thru notch - 0.5 mm depth. 4th row | 1 | |
| AFNDT-3432/2050AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2050 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/2195AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 2195 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3432/6061AL | 7 STEP WEDGE .050", .100",. 150", .200", .250", .300", .350". MATERIAL: 6061 ALUMINUM. PAD SIZE: 1.0" x 1.0" TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3433/7075T6 | 5 STEP WEDGE, 10mm, 20mm, 30mm, 40mm, 50mm, +/- .05mm. Material: 7075 Aluminum. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3437AL | CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3441AL | 10 STEP REFERENCE BLOCK SUPPLIED WITH DELRIN HOLDING BLOCK, STEP SIZES: .015", .025", .035", .045", .055", .065", .075", .085", .095",.105". PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance | 1 | |
| AFNDT-3442AL | Aluminum Multi-hole reference standard. Material: 7075-T6 Aluminum. Contains 10 hole sizes; 1/8 inch (3.175mm), 3/16 inch (4.74mm),1/4 inch (6.35mm), 5/16 inch (7.92mm), 3/8 inch (9.52mm), 7/16 inch (11.09mm), 1/2 inch (12.7mm), 9/16 inch (14.27mm), 5/8 i | 1 | |
| AFNDT-3443AL | Metric 6 Step Wedge, 2mm, 4mm, 6mm, 8mm, 10mm, 20mm ± .5mm, Pad Size: 25mm X 25mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3445AL | METRIC 5 STEP WEDGE, 10mm, 15mm, 20mm, 25mm, 30mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AFNDT-3446 | SURFACE STANDARD MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. EDM SLOT (0.5mm(.020") DEEP) x (0.13mm(.05") WIDE) +/-.03mm. BLOCK SIZE 3.50" X 1.0" X .50 Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/2024AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3449/7075AL | 8 STEP WEDGE, STEP SIZES: .030", .040", .050", .060", .070", .080", .090", and .100" +/- .001". PAD SIZE: 1.0" x 1.0" Supplied With Delrin Holding Block. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3452AL | 8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm, 20mm. (Tolerance: +/-0.02mm).- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance. | 1 | |
| AFNDT-3453 | Custom Calibration Block, 7050-T7 Aluminum. Hole Diameter .310 Ø Contains one EDM Corner Notch .020" x .020" +/- .002", and one EDM Surface Notch .030 deep x .015" wide +/- .002 . Block Size = 3.75" x 1.0" x .25". Includes Test Report and Certificate | 1 | |
| AFNDT-3455/2024T3 | 7 STEP WEDGE. STEP SIZES OF .100", .200", .300", .400", .500", .600", and .700" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3455/6061T6 | 7 STEP WEDGE. STEP SIZES OF .100", .200", .300", .400", .500", .600", and .700" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 6061-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-3455/7075T6 | 7 STEP WEDGE. STEP SIZES OF .100", .200", .300", .400", .500", .600", and .700" +/- .001". PAD SIZE: 1.0" x 1.0", MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-4010/2024T3 | 6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001", Material: 2024-T3 Aluminum. Pad Size: 0.75" x 0.75" , BLOCK SIZE: 4.50" L x .750"W SUPPLIED WITH D | 1 | |
| AFNDT-4010/7075T6 | 6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001", Material: 7075-T6 Aluminum. Pad Size: 0.75" x 0.75" , BLOCK SIZE: 4.50" L x .750"W SUPPLIED WITH D | 1 | |
| AFNDT-7075AWSDS | DISTANCE / SENSITIVITY (DS) CALIBRATION BLOCK 7075-T6 ALUMINUM..AWS type DS | 1 | |
| AFNDT-7075DAA19 | ASTM DISTANCE AMPLITUDE SET OF 19 7075-T6 ALUMINUM (CASE INCL) 3/34", 5/64" and 8/64" FLAT BOTTOM HOLES | 1 | |
| AFNDT-CRJ200/CRS | SURFACE REFERENCE STANDARD, ALUMINUM, .005W x .008", .020", .040" EDM NOTCH DEPTHS . MATERIAL 2024-T3 AL...CRJ200 PART1 51-20-06 PG.9 | 1 | |
| AFNDT-DAC3 | SET OF 3 DAC BLOCKS,(DISTANCE/AREA AMPLITUDE SET) 7075-T6 ALUMINUM...3/64" , 5/64", 8/64"FLAT BOTTOM HOLES WITH METAL TRAVEL DISTANCES OF (1/8",1/4", 1/2", 3/4", 1 1/2", 3") | 1 | |
| AFNDT-DAC7 | SET OF 7 DAC BLOCKS,(DISTANCE/AREA AMPLITUDE SET) 7075-T6 ALUMINUM...3/64" FLAT BOTTOM HOLES WITH METAL TRAVEL DISTANCES OF (1/8",1/4", 1/2", 3/4", 1", 1 1/4", and 1 3/4") | 1 | |
| AFNDT-IIW-01AL | ALUM. IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 7075-T6 Aluminum. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 a... | 1 | |
| AFNDT-IIW-01CS | IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 1018 Carbon Steel. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 and AW... | 1 | |
| AFNDT-PR-T-2521/22 | CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance. | 1 | |
| AFNDT-ROMPAS-7075-T6 | ROMPAS BLOCK, 7075-T6 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case) | 1 | |
| AFNDT-SRS-082A-1 | EDDY CURRENT SURFACE BLOCK 7075-T6 ALUMINUM. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Inc... | 1 | |
| AFNDT-SRS-4A | SURFACE STANDARD ALUMINUM(2024-T351) 1 EDM SLOT (0.040 DEEP) | 1 | |
| AFNDT2054 | 10 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. Hole Sizes: 1/8”, 3/16”, ¼”, 5/16”, 3/8”, 7/16”, ½”, 9/16”, 5/8”. DEPTH: 0.5 +/- 0.05mm (0.020 +/- 0.002in) WIDTH: 0.1 +/- 0.05mm (0.004 +/- 0.002 in. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0204-70AT | 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 2.25MHz .25" x .25" ELEMENT, CASE SIZE( .550"L x .310"W x .675" H) SUPPLIED WITH A TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of conformance. | 1 | |
| AFS-0503-45S | STAVELEY 45 DEGREES IN ALUMINUM SHEAR WAVE TRANSDUCER 5MHz 187" x .187" ELEMENT SIDE MOUNT MICRODOT CONNECTOR | 1 | |
| AFS-0503-45T | Mini Angle Beam Transducer, 5.0MHz, 0.187" x 0.187" Element, 45° Shear in Aluminum, Top Mount Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0503-70S | Mini Angle Beam Transducer, 5.0MHz, 0.187" x 0.187" Element, 70° Shear in Aluminum, Side Mount Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0503-70T | Mini Angle Beam Transducer, 5.0MHz, 0.187" x 0.187" Element, 70° Shear in Aluminum, Top Mount Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0504-40AT | 60° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .187" x .25" ELEMENT, CASE SIZE( .47"L x .31"W x .55" H) TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0504-45AS | OLYMPUS 45° DEGREES IN ALUMINUM SHEAR WAVE TRANSDUCER 5MHz .25" x .25" ELEMENT SIDE MOUNT MICRODOT CONNECTOR. CASE SIZE: .550" L x .310" W x .675"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0504-45AT | OLYMPUS 45° DEGREES IN ALUMINUM SHEAR WAVE TRANSDUCER 5MHz .25" x .25" ELEMENT TOP MOUNT MICRODOT CONNECTOR. CASE SIZE: .550" L x .310" W x .675"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0504-60AS | 60° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .25" x .25" ELEMENT, CASE SIZE( .550"L x .310"W x .675" H) SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0504-70AS | 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .25" x .25" ELEMENT, CASE SIZE( .550"L x .310"W x .675" H) SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0506 | 5MHZ 51° SHEAR WAVE IN ALUMINUM. CASE SIZE .50" W x .80"L x .37"H, REFERENCE STANDARD NDT624 | 1 | |
| AFS-0507 | 5MHZ 32° SHEARWAVE IN ALUMINUM. CASE SIZE .50"X.80"L. HEIGHT TAPERS FROM .20"H FRONT TO .32" H BACK. REFERENCE STANDARD IS NDT624 | 1 | |
| AFS-0531 | CUSTOM ANGLE BEAM TRANSDUCER. 5MHz 45 DEG. IN ALUMINUM TOP MOUNT CONNECTOR. CASE SIZE(.230"L x .350"W x .500"H) | 1 | |
| AFS-0532 | CUSTOM MULTI SHOE TRANSDUCER 45 DEG. IN ALUMINUM 5MHz. (15, 0, 15, DEGREE OFF SETS) | 1 | |
| AFS-0541 | A 5 MHZ TRANSDUCER WITH A TOP MOUNTED CONNECTOR THAT PUTS A 75 DEGREE SHEAR WAVE INTO ALUMINUM. APPROXIMATE CASE DIMENSIONS: 0.750 INCH (19.05 MM) LON | 1 | |
| AFS-0545 | 5MHz 45 deg in aluminum angle beam transducer. ( .600"L x .350"W x .45"H)..(AP-HP-1/4-5.00-45A) | 1 | |
| AFS-0546 | 5MHz 60 deg in aluminum angle beam transducer. ( .600"L x .350"W x .45"H)..(AP-HP-1/4-5.00-60A) | 1 | |
| AFS-0556 | 35° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .25H"x..325W" ELEMENT, CASE SIZE: .75"L x .55"H x .43"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0557 | 45° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .25H"x..325W" ELEMENT, CASE SIZE: .75"L x .55"H x .43"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0559 | CUSTOM 5MHz MINITURE 70 DEGREE IN ALUMINUM ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR. | 1 | |
| AFS-0560S | CUSTOM 5MHz MINITURE 70 DEGREE IN ALUMINUM ANGLE BEAM TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR. CASE SIZE: .500"L x .270"W x .300"H | 1 | |
| AFS-0561S | CUSTOM 5MHz MINITURE 45 DEGREE IN ALUMINUM ANGLE BEAM TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR. CASE SIZE: .500"L x .270"W x .300"H | 1 | |
| AFS-0579T | 30° ALUMINUM, ANGLE BEAM TRANSDUCER 5MHZ .330"x.25" ELEMENT, CASE SIZE( .750L X .430W X .550"H )TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0590T | 30° ALUMINUM, ANGLE BEAM TRANSDUCER 2.25MHz .330"x.25" ELEMENT, CASE SIZE( .750L X .430W X .550"H )TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0601 | 60° in ALUMINUM 5MHZ TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH MICRODOT CONNECTOR,.187" H x.130" W ELEMENT, CASE SIZE: .375"L x .400"H x .200"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0602 | 60° in ALUMINUM 5MHZ SIDE MOUNT MINI ANGLE BEAM TRANSDUCER WITH MICRODOT CONNECTOR,.187" H x.130" W ELEMENT, CASE SIZE: .375"L x .400"H x .200"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0603 | 70° in ALUMINUM 5MHZ TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH MICRODOT CONNECTOR,.187" H x.130" W ELEMENT, CASE SIZE: .375"L x .400"H x .200"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0604 | 70° in ALUMINUM 5MHZ SIDE MOUNT MINI ANGLE BEAM TRANSDUCER WITH MICRODOT CONNECTOR,.187" H x.130" W ELEMENT, CASE SIZE: .375"L x .400"H x .200"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0610S | Custom 5MHz 22-degree shear wave transducer in aluminum, 0.38 inch (9.7 mm) element, 2.0 inch (51mm) radius contact surface with mounted microdot connector. Case dimensions: 0.75"(19.1 mm) x 0.50"12.7 mm) x 0.25"(6.4 mm). Includes Test Report and Certi... | 1 | |
| AFS-0611S | Custom 5MHz 31-degree shear wave transducer in aluminum, 0.38 inch (9.7 mm) element, 2.0 inch (51mm) radius contact surface with mounted microdot connector. Case dimensions: 0.75"(19.1 mm) x 0.50"12.7 mm) x 0.25"(6.4 mm). Includes Test Report and Certi... | 1 | |
| AFS-0612S | Custom 5MHz 33-degree shear wave transducer in aluminum, 0.38 inch (9.7 mm) element, 2.0 inch (51mm) radius contact surface with mounted microdot connector. Case dimensions: 0.75"(19.1 mm) x 0.50"12.7 mm) x 0.25"(6.4 mm). Includes Test Report and Certi... | 1 | |
| AFS-0613S | Custom 5MHz 26-degree shear wave transducer in aluminum, 0.38 inch (9.7 mm) element, 2.0 inch (51mm) radius contact surface with mounted microdot connector. Case dimensions: 0.75"(19.1 mm) x 0.50"12.7 mm) x 0.25"(6.4 mm). Includes Test Report and Certi... | 1 | |
| AFS-0614S | Custom 5MHz 45-degree shear wave transducer in aluminum, 0.38 inch (9.7 mm) element, contact surface with mounted microdot connector. Case dimensions: 0.75"(19.1 mm) x 0.50"12.7 mm) x 0.65"(16.5 mm). Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0620 | 60° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, STAINLESS STEEL CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0621 | 70° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, STAINLESS STEEL CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-0635AG | 5MHZ 40° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0635AGR | 5MHZ 40° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH SIDE MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0636AG | 5MHZ 45° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0636AGR | 5MHZ 45° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0637AG | 5MHZ 50° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0637AGR | 5MHZ 50° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH SIDE MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0638AG | 5MHZ 55° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0638AGR | 5MHZ 55° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH SIDE MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0639 | 5MHZ 60° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0639AG | 5MHZ 60° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0639AGR | 5MHZ 60° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH SIDE MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0640AG | 5MHZ 65° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0641AG | 5MHZ 70° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0642AG | 5MHZ 75° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0668LPR | 5MHZ 45° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .400" x .250" x .630". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0672LP | 5MHZ 65° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-0674LP | 5MHZ 75° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .710" x .370" x .550". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1015 | 10MHZ 70° IN ALUMINUM, TOP MOUNT CONNECTOR MAX LENGTH .315" BOEING 737 PART 4. 52-10-02 | 1 | |
| AFS-1025 | Panametrics Integral Angle Beam Transducer 5 MHz 70° in Aluminum. .433"x.433"x.236" case: .187"sq.element. stainless steel case. Includes Test Report ancd Certificate of Conformance. Panametrics Integral Angle Beam Transducer 5 MHz 70° in Aluminum. .... | 1 | |
| AFS-1028 | TRANSDUCER, 22° IN ALUMINUM, 5MHZ, 120MM RADIUS SHOE, TOP MOUNT | 1 | |
| AFS-1070 | 60° IN ALUMINUM 5 MHz .25" X .25" TOP MOUNT MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .75"L x .37"W x .50"H WITH MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1080 | 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .25" x .25" ELEMENT, CASE SIZE: .75" x .37" x .50" WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1160 | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 45 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1161 | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1175 | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, SIDE MOUNT MICRODOT CONNECTOR, .187" x .187" ELEMENT. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1175T | 70°. ANGLE BEAM TRANSDUCER in ALUMINUM, .187" x .187" ELEMENT, TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .67'L x .26"W x .33"H. Includes Test Report and Certificate of Conformance. Reference: B767 Part 4 53-50-05. Standard Part number NDT679 | 1 | |
| AFS-1177 | CUSTOM 5 MHz ANGLE BEAM TRANSDUCER 35° degrees in ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR. USED WITH NDT6034. | 1 | |
| AFS-1183 | CUSTOM 5 MHz ANGLE BEAM TRANSDUCER 45° degrees in ALUMINUM, WITH END MOUNTED MICRODOT CONNECTOR. USED WITH NDT6034 | 1 | |
| AFS-1203 | CUSTOM AIRBUS SEARCH UNIT 5MHz 40° DEGREES IN ALUMINUM. SUPPLIED WITH A TOP MOUNT MICRODOT CONNECTOR WITH A 34mm (1.339") RADIUS. USED WITH P/N: 99A57004001291, A300-600 57-53-05 PAGE 404 FIGURE 402. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1224S | 55° MINI ANGLE BEAM TRANSDUCER IN ALUMINUM 5MHZ .120" x ..250"; WITH SIDE MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375"L x .425"H x .325"W. includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1224T | 55° MINI ANGLE BEAM TRANSDUCER IN ALUMINUM 5MHZ .120" x ..250"; WITH TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375"L x .425"H x .325"W. includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1225S | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Right Angle Microdot Connector. | 1 | |
| AFS-1225T | Sub Miniature Integral Angle Beam Transducers, Standard Series, 5 MHz, 0.120 in. x 0.250 in.; 60 degree shearwave in Aluminum, Top Microdot Connector. Case Size: .375"L x .425"H x .325"W | 1 | |
| AFS-1226S | 65° MINI ANGLE BEAM TRANSDUCER IN ALUMINUM 5MHZ .120" x ..250"; WITH SIDE MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375"L x .425"H x .325"W. includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1226S. | 65° MINI ANGLE BEAM TRANSDUCER IN ALUMINUM 5MHZ .120" x ..250"; WITH SIDE MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375"L x .425"H x .325"W. includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1226T | 65° MINI ANGLE BEAM TRANSDUCER IN ALUMINUM 5MHZ .120" x ..250"; WITH TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375"L x .425"H x .325"W. includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1227S | 70° IN ALUMINUM 5MHZ .120" x ..250"; SIDE MOUNT MINI ANGLE BEAM TRANSDUCER WITH MICRODOT CONNECTOR. CASE SIZE: .375"L x .425"H x .325"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1227T | 70° IN ALUMINUM 5MHZ .120" x ..250"; TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH MICRODOT CONNECTOR. CASE SIZE: .375"L x .425"H x .325"W. Includes Test Report and Certificate of Conformance | 1 | |
| AFS-1229T | 80° IN ALUMINUM 5MHZ .120" x ..250"; TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH MICRODOT CONNECTOR. CASE SIZE: .375"L x .425"H x .325"W. Includes Test Report and Certificate of Conformance | 1 | |
| AFS-1239 | EXTRA SMALL 70 DEGREE SHEAR WAVE TRANSDUCER IN ALUMINUM. ..5MHz (.130" x .187") ELEMENT..CASE SIZE(.32"L x .42"H x .24"W) | 1 | |
| AFS-1240 | 45° ALUMINUM 5 MHZ .25" X .25" SIDE MOUNT ANGLE BEAM TRANSDUCER. CASE SIZE: .800"L x .300"W x .400"H MAX WITH MICRODOT CONNECTOR | 1 | |
| AFS-1266S | 5 MHz ANGLE BEAM TRANSDUCER 45° IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR, .150" X .250" ELEMENT. CASE SIZE: .35"W X .375"LX.375"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1268S | 5 MHz ANGLE BEAM TRANSDUCER 60° IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR, .150" X .250" ELEMENT. CASE SIZE: .35"W X .375"LX.375"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1268T | 5 MHz ANGLE BEAM TRANSDUCER 60° IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR, .150" X .250" ELEMENT. CASE SIZE: .35"W X .375"LX.375"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1269T | 5 MHz ANGLE BEAM TRANSDUCER 70° IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR, .150" X .250" ELEMENT. CASE SIZE: .35"W X .375"LX.375"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1270S | 5 MHz ANGLE BEAM TRANSDUCER 70° IN ALUMINUM WITH END MOUNTED MICRODOT CONNECTOR, .150" X .250" ELEMENT. CASE SIZE: .35"W X .375"LX.375"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1291 | 5MHZ 60° IN ALUMINUM .25" X.187" ELEMENT WITH TOP MOUNT MICRODOT CONNECTOR. CASE SIZE: .350"W x .375"L x .750"H. BOEING 737 PART 4 57-10-13, pg.1 USED WITH NDT3166-06 AND NDT3166-07. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1292 | 5MHz, 60°in Aluminum .25"X.187" ELEMENT SIDE MOUNT .350"W x .375"L x .750"H. REFERENCE: BOEING 737 PART 4 57-10-09, pg.2. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1293 | CUSTOM BOEING 737 TRANSDUCER, 70° in ALUMINUM, 5MHZ .250" x .187" ELEMENT, TOP MOUNT MICRODOT CONNECTOR, .350"W x .375"L x .750"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1299 | 5MHZ 70° IN ALUMINUM .25" ELEMENT, TOP MOUNT MICRODOT CONNECTOR. CASE DIMENSIONS: .350"W x.375"L x.750"H. BOEING 737 PART 4 57-10-17, pg.2 USED WITH NDT3186 and NDT3187. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1300-D | TRANSDUCER POSITIONER (ALUMINUM) FOR THE TEK-5017 SERIES TRANSDUCERS. 767Part 4 57-50-02 Pages 1-10 | 1 | |
| AFS-1306 | 60° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .500"L x .425"H x .300"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1308A | CUSTOM 45° in ALUMINUM SEARCH UNIT, 5MHz .25" ELEMENT. CASE SIZE: .790"L x .360" W x .500" H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1316 | 8MHZ 50° SHEARWAVE TRANSDUCER IN ALUMINUM | 1 | |
| AFS-1317 | 8MHZ 40° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1318 | 8MHZ 45° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1318-D | 8MHz 45° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. STAINLESS STEEL HOUSING, CASE SIZE: 10mm x 6mm x15mm. TOP and SIDE MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1319 | 8MHZ 50° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1320 | 8MHZ 55° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1321 | 8MHZ 60° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. STAINLESS STEEL HOUSING, CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1321D | 8MHz 60° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. STAINLESS STEEL HOUSING, CASE SIZE: 10mm x 6mm x15mm. TOP and SIDE MOUNTED MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1322 | 8MHZ 65° ANGLE BEAM TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1322LP | 5MHZ 65° TRANSVERSE BEAM TRANSDUCER IN ALUMINUM WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL HOUSING, .25" PIEZOCOMPOSITE ELEMENT. CASE SIZE: .400" x .250" x .630". Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1323 | 8MHZ 70° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1324 | 8MHZ 75° SHEARWAVE TRANSDUCER IN ALUMINUM PIEZOCOMPOSITE ELEMENT. CASE SIZE: 10mm x 6mm x15mm. Includes Test Report and Certificate of Conformance(COC) | 1 | |
| AFS-1326L-I | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (LEFT -INBOARD) TRANSDUCER WITH YOKE USED WITH NDT768 | 1 | |
| AFS-1326L-O | CUSTOM 65 DEGREE IN ALUMINUM 5MHz (LEFT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT768 | 1 | |
| AFS-1326R-I | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (RIGHT -INBOARD) TRANSDUCER WITH YOKE USED WITH NDT769 | 1 | |
| AFS-1326R-O | CUSTOM 65 DEGREE IN ALUMINUM 5MHz (RIGHT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT769 | 1 | |
| AFS-1327L-I | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (LEFT -INBOARD) TRANSDUCER WITH YOKE USED WITH NDT771 | 1 | |
| AFS-1327L-O | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (LEFT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT771 | 1 | |
| AFS-1327R-I | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (RIGHT -INBOARD) TRANSDUCER WITH YOKE USED WITH NDT774 | 1 | |
| AFS-1327R-O | CUSTOM 45 DEGREE IN ALUMINUM 5MHz (RIGHT -OUTBOARD) TRANSDUCER WITH YOKE USED WITH NDT774 | 1 | |
| AFS-1338/45A | 5.0 mhz, 0.250 in. by 0.250 in. element size; 45° degree angle in Aluminum, Top mount microdot connector; 0.690 in. lg; 0.590 in. w; 0.330 in. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1339/60A | 5.0 mhz, 0.250 in. by 0.250 in. element size; 60° degree angle in Aluminum with top mount microdot connector; 0.690 in. lg; 0.590 in. w; 0.330 in. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1340 | SEARCH UNIT 80° in aluminum , 5MHZ ANGLE BEAM. CASE SIZE (.470" L x .350" W x .630" H). Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1341 | SEARCH UNIT 40° IN ALUMINUM, 5MHz, .25" x .187" ELEMENT, .(.35"W x ..47"L x .63"H), top mount connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1342 | SEARCH UNIT 35° IN ALUMINUM, 5MHz, .25" x .187" ELEMENT, .(.35"W x ..47"L x .63"H), top mount connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1344/45S | 10.0 mhz, 0.250 in. by 0.250 in. element size; 45° degree angle in Aluminum with Side mount microdot connector; 0.690 in. lg; 0.590 in. w; 0.330 in. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1345 | SEARCH UNIT 45° IN ALUMINUM, 5MHz, .25" x .187" ELEMENT, .(.35"W x ..47"L x .63"H), top mount connector. Includes Test Report and Certificate of Conformance.Report and Certificate of Conformance. | 1 | |
| AFS-1350 | MINI ANGLE BEAM TRANSDUCER,10MHz 45° in ALUMINUM WITH TOP MOUNT MICRODOT CONNECTOR,.130" x.187" ELEMENT, CASE SIZE: .325"L x .360"H x .250"W | 1 | |
| AFS-1351 | MINI ANGLE BEAM TRANSDUCER,10MHz 45° in ALUMINUM WITH SIDE MOUNT MICRODOT CONNECTOR,.130" x.187" ELEMENT, CASE SIZE: .325"L x .360"H x .250"W | 1 | |
| AFS-1352 | MINI ANGLE BEAM TRANSDUCER,10MHz 60° in ALUMINUM WITH TOP MOUNT MICRODOT CONNECTOR,.130" x.187" ELEMENT, CASE SIZE: .325"L x .360"H x .250"W | 1 | |
| AFS-1353 | MINI ANGLE BEAM TRANSDUCER,10MHz 60° in ALUMINUM WITH SIDE MOUNT MICRODOT CONNECTOR,.130" x.187" ELEMENT, CASE SIZE: .325"L x .360"H x .250"W | 1 | |
| AFS-1354/60S | 5MHZ 60° IN ALUMINUM .25" ELEMENT, SIDE MOUNT MICRODOT CONNECTOR. CASE DIMENSIONS: .350"W x.375"L x.750"H. BOEING 737 PART 4 Part 4 57-10-09. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1368 | 5 MHz, 45 degree shear wave transducer (in aluminum) with top-mounted microdot connector. Case size: 0.5 inch (13 mm) long, 0.35 inch (8.9 mm) wide, and 0.5 inch (13 mm) high. | 1 | |
| AFS-1368-1 | 5 MHz, 60° degree shear wave transducer (in aluminum) with top-mounted microdot connector. Case size: 0.5 inch (13 mm) long, 0.35 inch (8.9 mm) wide, and 0.5 inch (13 mm) high. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1368-2 | 5 MHz, 70° degree shear wave transducer (in aluminum) with top-mounted microdot connector. Case size: 0.5 inch (13 mm) long, 0.35 inch (8.9 mm) wide, and 0.5 inch (13 mm) high. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1388 | 60° ALUMINUM 5 MHZ 1/4" X 1/4", TOP MOUNT | 1 | |
| AFS-1390HC | 90° IN ALUMINUM 5 MHz .187" X .187" TOP MOUNT MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .690"L x .250"W x .590"H WITH TOP MOUNT MICRODOT CONNECTOR AND 10-32 HELICOIL ATTACHED FOR EXTENSION HANDLE USE. Includes Test Report and Certificate of Conformance | 1 | |
| AFS-1392-T1 | CUSTOM TRANSDUCER 5MHz 30° in ALUMINUM, .187" x .187" ELEMENT CASE SIZE: .900" L x .400" W x .950" H. BOEING 767 PT 4 54-50-07 | 1 | |
| AFS-1392-T2 | CUSTOM TRANSDUCER 5MHz 30° in ALUMINUM, .187" x .187" ELEMENT CASE SIZE: .900" L x .400" W x .950" H. BOEING 767 PT 4 54-50-07 | 1 | |
| AFS-139270RM | CUSTOM 70 DEGREE IN ALUMINUM SHEARWAVE TRANSDUCER, 3.5MHz PIEZOCOMPOSITE ELEMENT. SIDE MOUNTED MICRODOT CONNECTOR CASE SIZE: .25" L x .325"W x .500" H, 1/4" ELEMENT | 1 | |
| AFS-139270SM | CUSTOM 70 DEGREE IN ALUMINUM SHEARWAVE TRANSDUCER, 3.5MHz PIEZOCOMPOSITE ELEMENT. TOP MOUNTED MICRODOT CONNECTOR CASE SIZE: .25" L x .325"W x .500" H, 1/4" ELEMENT | 1 | |
| AFS-139370RM | CUSTOM 70 DEGREE IN ALUMINUM SHEARWAVE TRANSDUCER, 2.25MHz PIEZOCOMPOSITE ELEMENT. SIDE MOUNTED MICRODOT CONNECTOR CASE SIZE: .75 " L x .500"W x .625" H, 3/8" ELEMENT | 1 | |
| AFS-139370SM | CUSTOM 70 DEGREE IN ALUMINUM SHEARWAVE TRANSDUCER, 2.25MHz PIEZOCOMPOSITE ELEMENT. TOP MOUNTED MICRODOT CONNECTOR CASE SIZE: .75 " L x .500"W x .625" H, 3/8" ELEMENT | 1 | |
| AFS-1394 | CARGOLUX CUSTOM 5MHz .187", 40° IN ALUMINUM SHEAR WAVE TRANSDUCER WITH A 1.00" RADIUS FOR THE BOEING REFERENCE STANDARD LUG 1B7- FITTING-SEQUENCE CARRIAGE ATTACHMENT INBOARD TRAILING EDGE FLAP. CASE SIZE: .500"L x .270"W x .350". Includes Test Report... | 1 | |
| AFS-1395/45AS | Miniature Angle Beam Transducer, Side Mount Microdot Connector, 10MHz 45° in Aluminum, 25" x .25" Element. Case Size: .550"L x .300"W x .675" H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1395/45AT | Miniature Angle Beam Transducer, Top Mount Microdot Connector, 10MHz 45° in Aluminum, 25" x .25" Element. Case Size: .550"L x .300"W x .675" H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1395/60AS | Miniature Angle Beam Transducer, Side Mount Microdot Connector, 10MHz 60° in Aluminum, 25" x .25" Element. Case Size: .550"L x .300"W x .675" H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1395/60AT | Miniature Angle Beam Transducer, Top Mount Microdot Connector, 10MHz 60° in Aluminum, 25" x .25" Element. Case Size: .550"L x .300"W x .675" H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1395/70AS | Miniature Angle Beam Transducer, Side Mount Microdot Connector, 10MHz 70° in Aluminum, 25" x .25" Element. Case Size: .550"L x .300"W x .675" H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1395/70AT | Miniature Angle Beam Transducer, 10MHz 70° in Aluminum, 25" x .25" Element. Case Size: .550"L x .300"W x .675" H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1395/90AS | Miniature Angle Beam Transducer, 10MHz 90° Side Mount Microdot Connector in Aluminum, 25" x .25" Element. Case Size: .550"L x .300"W x .675" H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1395/90AT | Miniature Angle Beam Transducer, 10MHz 90° Top Mount Microdot Connector in Aluminum, 25" x .25" Element. Case Size: .550"L x .300"W x .675" H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1396/70AL | 5 MHz 70° Degree Angle Beam Transducer in Aluminum. Case Size .275"L x .315"W x .512H" , Side Mount Microdot Connector. Includes Test Report and cerfificate of Conformance. | 1 | |
| AFS-1398 | STAVELY CUSTOM 5MHz TRANSDUCER 31° IN ALUMINUM WITH .700" RADIUS USED WITH SB11530001-5. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1410CS | 30° in ALUMINUM 5MHZ MINI ANGLE BEAM TRANSDUCER, COMPOSITE ELEMENT BROADBAND WITH SIDE MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-1411CS | 45° in ALUMINUM 5MHZ MINI ANGLE BEAM TRANSDUCER COMPOSITE ELEMENT BROADBAND WITH SIDE MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFS-1412CS | 60° in ALUMINUM 5MHZ MINI ANGLE BEAM TRANSDUCER COMPOSITE ELEMENT BROADBAND WITH SIDE MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFS-470AS | 70° in ALUMINUM 4MHz TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-5023T | 70° IN ALUMINUM 5MHZ .120" x ..187"; TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH MICRODOT CONNECTOR. CASE SIZE: .375"L x .400"H x .270"W | 1 | |
| AFS-5032-1 | CUSTOM LOW PROFILE 5MHz SHEAR WAVE TRANSDUCER 35° IN ALUMINUM WITH A SIDE MOUNTED MICRODOT CONNECTOR. | 1 | |
| AFS-5032-2 | CUSTOM LOW PROFILE 5MHz SHEAR WAVE TRANSDUCER 35° IN ALUMINUM 2.60" RADIUSWITH A SIDE MOUNTED MICRODOT CONNECTOR. | 1 | |
| AFS-5032-3 | CUSTOM LOW PROFILE 5MHz SHEAR WAVE TRANSDUCER 35° IN ALUMINUM 2.75" RADIUS WITH A SIDE MOUNTED MICRODOT CONNECTOR. | 1 | |
| AFS-5032-4 | CUSTOM LOW PROFILE 5MHz SHEAR WAVE TRANSDUCER 35° IN ALUMINUM 2.75" RADIUS (RIGHT) WITH A SIDE MOUNTED MICRODOT CONNECTOR. | 1 | |
| AFS-5032-5 | CUSTOM LOW PROFILE 5MHz SHEAR WAVE TRANSDUCER 35° IN ALUMINUM (LEFT) WITH A SIDE MOUNTED MICRODOT CONNECTOR. | 1 | |
| AFS-5032-6 | CUSTOM LOW PROFILE 5MHz SHEAR WAVE TRANSDUCER 35° IN ALUMINUM 2.75" RADIUS (LEFT) WITH A SIDE MOUNTED MICRODOT CONNECTOR. | 1 | |
| AFS-5032-7 | CUSTOM LOW PROFILE 5MHz SHEAR WAVE TRANSDUCER 35° IN ALUMINUM (RIGHT) WITH A SIDE MOUNTED MICRODOT CONNECTOR. | 1 | |
| AFS-523AT-R1.0 | OLYMPUS NDT Subminiture Angle Beam Transducer 5MHz, 23° in aluminum with a 1.0" Radius, Supplied with an Top Mount Microdot Connector. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-530AT | 30° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-535AT | 35° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-537AS-1.92R | 37° in ALUMINUM 5MHz TRANSDUCER WITH 1.92" RADIUS, END MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-540AS | SMALL 40° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .187" x .160" ELEMENT, CASE SIZE( .550"L x .26"W x .450"H ) SIDE MOUNT MICRODOT CONNECTOR...Used for Messier-Dowty service bulletin No. 146-32-174 | 1 | |
| AFS-540AT | SMALL 40° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .187" x .160" ELEMENT, CASE SIZE( .550"L x .26"W x .450"H ) WITH TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-541AS-1.92R | 41° in ALUMINUM 5MHz TRANSDUCER WITH 1.92" RADIUS, END MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-545AS | SMALL 45° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .187" x .187" ELEMENT, CASE SIZE( .550" x .26" x .450" ) SIDE MOUNT MICRODOT CONNECTOR | 1 | |
| AFS-545AS-R37M | SMALL 45° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .187" x .187" ELEMENT, CASE SIZE( .50" x .26" x .450" ) SIDE MOUNT MICRODOT CONNECTOR WITH 37mm(1.457") RADIUS. | 1 | |
| AFS-545AT | 45° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W | 1 | |
| AFS-560AS | 60° in ALUMINUM 5MHz TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-560AS-1 | 60° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .500"L x .400"H x .26"W (.400" MAX HEIGHT). Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-560AT | 60° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-560AT-1 | 60° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W (.400" MAX HEIGHT) | 1 | |
| AFS-570AS | 70° in ALUMINUM 5MHz TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-570AS-1 | 70° in ALUMINUM 5MHz TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W (.400" MAX HEIGHT) | 1 | |
| AFS-570AT | 70° in ALUMINUM 5MHz TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-575AS | 75° in ALUMINUM 5MHz TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR, .187"x..187" ELEMENT, CASE SIZE: .55"L x .45"H x .26"W | 1 | |
| AFS-590AS | 90° IN ALUMINUM MINITURE ANGLE BEAM TRANSDUCER 5 MHz .187" X .187" , SIDE MOUNT MICRODOT CONNECTOR.. CASE SIZE: .55"L x .260"W x .450"H. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-590AT | 90° IN ALUMINUM 5 MHz .187" X .187" TOP MOUNT MINITURE ANGLE BEAM TRANSDUCER. CASE SIZE: .55"L x .260"W x .450"H WITH MICRODOT CONNECTOR | 1 | |
| AFS-745AS | SMALL 45° ANGLE BEAM TRANSDUCER in ALUMINUM, 7.5MHz .187" x .187" ELEMENT, CASE SIZE( .550" x .26" x .450" ) SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-745AT | SMALL 45° ANGLE BEAM TRANSDUCER in ALUMINUM, 7.5MHz .187" x .187" ELEMENT, CASE SIZE( .550" x .26" x .450" ) TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-760AS | SMALL 60° ANGLE BEAM TRANSDUCER in ALUMINUM, 7.5MHz .187" x .187" ELEMENT, CASE SIZE( .550" x .26" x .450" ) SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-760AT | SMALL 60° ANGLE BEAM TRANSDUCER in ALUMINUM, 7.5MHz .187" x .187" ELEMENT, CASE SIZE( .550" x .26" x .450" ) TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-770AS | SMALL 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 7.5MHz .187" x .187" ELEMENT, CASE SIZE( .550" x .26" x .450" ) SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFS-770AT | SMALL 70° ANGLE BEAM TRANSDUCER in ALUMINUM, 7.5MHz .187" x .187" ELEMENT, CASE SIZE( .550" x .26" x .450" ) TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFW-45A | 45° IN ALUMINUM LUCITE (PLEXIGLASS) WEDGE FOR .25" DIAMETER TRANSDUCER. 3/8-32 THREAD | 1 | |
| AFW-500045A | CUSTOM ACRYLIC WEDGE 45° IN ALUMINUM, 1.260"Long X .525" Wide X .460" High. Includes Certificate of Conformance. | 1 | |
| AFW-5A | 5° IN ALUMINUM LUCITE (PLEXIGLASS) WEDGE FOR .25" DIAMETER TRANSDUCER. 3/8-32 THREAD | 1 | |
| AFW37-70A | 3/8"Ø THREADED WEDGE 70° IN ALUMINUM | 1 | |
| AFW50-70A | 1/2"Ø THREADED WEDGE 70° IN ALUMINUM. | 1 | |
| AFWQ-23A | MSWQC STYLE QUICK FIT WEDGE 23° IN ALUMINUM 3/8-32 THREADED FLAT BOTTOM HOLE. | 1 | |
| AFX-1040AT | 40° in ALUMINUM 10MHz TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFX-1045AS | 45° in ALUMINUM 10MHZ SIDE MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-1045AT | 45° IN ALUMINUM 10MHz .170" X.187"; MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375" L x .375" H x .260"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-1055AT | 55° in ALUMINUM 10MHz TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-1060AS | 60° in ALUMINUM 10MHZ SIDE MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-1060AT | 60° IN ALUMINUM 10MHz .170" X.187"; MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375" L x .375" H x .260"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-1065AT | 65° in ALUMINUM 10MHz TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFX-1070AS | 70° ALUMINUM 10MHZ .187X.187; SIDE MOUNT MINI ANGLE BEAM TRANSDUCER | 1 | |
| AFX-1070AT | 70° in ALUMINUM 10MHz TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFX-260AS | 60° IN ALUMINUM 2.25MHZ .160" X.187"; MINI ANGLE BEAM TRANSDUCER WITH END MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375" L x .375" H x .260"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-260AT | 60° ALUMINUM 2.25MHz .187"X.187"; TOP MOUNT MINI ANGLE BEAM TRANSDUCER | 1 | |
| AFX-530AT | 30° in ALUMINUM 5MHZ MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-535AS | 35° in ALUMINUM 5MHZ MINI ANGLE BEAM TRANSDUCER WITH SIDE MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-535AT | 35° in ALUMINUM 5MHZ MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-540AS | 40° ALUMINUM 5MHZ .187X.187; SIDE MOUNT MINI ANGLE BEAM TRANSDUCER | 1 | |
| AFX-540AT | 40° in ALUMINUM 5MHZ TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFX-545AS | 45° in ALUMINUM 5MHZ SIDE MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFX-545AT | 45° IN ALUMINUM 5MHZ MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .260"W. Includes Test Report and Certificate of Conformance. | 2 | |
| AFX-545AT-2 | 45° ALUMINUM 5MHZ .187X.187; TOP MOUNT MINI ANGLE BEAM TRANSDUCER..(SIZE RESTRICTION) | 1 | |
| AFX-550AS | 50° ALUMINUM 5MHZ .187X.187; SIDE MOUNT MINI ANGLE BEAM TRANSDUCER | 1 | |
| AFX-550AT | 50° in ALUMINUM 5MHZ TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .260"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-555AS | 55° ALUMINUM 5MHZ .187X.187; SIDE MOUNT MINI ANGLE BEAM TRANSDUCER | 1 | |
| AFX-555AT | 55° in ALUMINUM 5MHZ TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.170" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .260"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-557AT | 57° in ALUMINUM 5MHZ TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFX-560AS | 60° in ALUMINUM 5MHZ SIDE MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFX-560AT | 60° IN ALUMINUM 5MHZ .170" X.187"; MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375" L x .375" H x .260"W. Includes Test Report and Certificate of Conformance. | 2 | |
| AFX-565AS | 65° ALUMINUM 5MHZ .187X.187; SIDE MOUNT MINI ANGLE BEAM TRANSDUCER | 1 | |
| AFX-565AT | 65° IN ALUMINUM 5MHZ .170" X.187"; MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375" L x .375" H x .260"W. Includes Test Report and Certificate of Conformance... | 1 | |
| AFX-567AT | 67° in ALUMINUM 5MHZ TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFX-569AS | 69° in ALUMINUM 5MHZ TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .26"W | 1 | |
| AFX-570AS | 70° IN ALUMINUM 5MHZ .160" X.187"; MINI ANGLE BEAM TRANSDUCER WITH SIDE MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375" L x .375" H x .260"W. Includes Test Report and Certificate of Conformance..... | 1 | |
| AFX-570AT | 70° IN ALUMINUM 5MHZ .160" X.187"; MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNTED MICRODOT CONNECTOR. CASE SIZE: .375" L x .375" H x .260"W. Includes Test Report and Certificate of Conformance. | 2 | |
| AFX-570AT-1 | 70° ALUMINUM 5MHZ (.130"X.187" ELEMENT); TOP MOUNT MICRODOT MINI ANGLE BEAM TRANSDUCER..CASE(.32"L x .24"W x.42"H) | 1 | |
| AFX-575AT | 75° in ALUMINUM 5MHZ TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.130" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .260"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-580AT | 80° in ALUMINUM 5MHZ TOP MOUNT MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.130" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .260"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFX-590AS | 90° ALUMINUM 5MHZ .187X.187; SIDE MOUNT MINI ANGLE BEAM TRANSDUCER | 1 | |
| AFX-590AT | 90° ALUMINUM 5MHZ .187X.187; TOP MOUNT MINI ANGLE BEAM TRANSDUCER | 1 | |
| AFXS-545AT | STAINLESS STEEL, 45° IN ALUMINUM 5MHz MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNT MICRODOT CONNECTOR,.187" x.187" ELEMENT, CASE SIZE: .375"L x .375"H x .260"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFXS-570AT | 70° IN ALUMINUM 5MHZ .160" X.187"; MINI ANGLE BEAM TRANSDUCER WITH TOP MOUNTED MICRODOT CONNECTOR. STAINLESS STEEL CASE SIZE: .375" L x .375" H x .260"W. Includes Test Report and Certificate of Conformance. | 1 | |
| AFXX-1045AT | 45° ALUMINUM 10MHZ .187X.150; TOP MOUNT MINI ANGLE BEAM TRANSDUCER.. CASE(.25"W x .300"L X .300"H) | 1 | |
| AFXX-560AT | EXTRA SMALL 5MHz 60° MINI ANGLE BEAM TRANSDUCER IN ALUMINUM, .310" L x .250" W. Includes Test Report and Cetificate of Conformance. | 1 | |
| AFXX-570AT | EXTRA SMALL 5MHz 70° MINI ANGLE BEAM TRANSDUCER IN ALUMINUM, .330" L x .250" W. Includes Test Report and Cetificate of Conformance. | 1 | |
| AGE-00258-401 | FITTING-EFCU,ALUMINUM | 8 | |
| AGE-01472-001 | BOX,ALUMINUM | 1 | |
| AGE-01472-401 | BOX,ALUMINUM | 1 | |
| AGE-01473-001 | COVER,ALUMINUM | 1 | |
| AGE-01473-401 | COVER,ALUMINUM | 1 | |
| AGE-02001-401 | REFERENCE STANDARD, GENERAL EDDY CURRENT TESTING, ALUMINUM ALLOY | 1 | |
| AGE-02190-401 | BOX-ALUMINUM | 1 | |
| AGE-02191-001 | COVER-ALUMINUM | 1 | |
| AGE-02361-001 | PULLEY 2, ALUMINUM | 1 | |
| AGE-02592-001 | BOX-ALUMINUM | 1 | |
| AGE-02592-003 | BOX-ALUMINUM | 1 | |
| AGE-02592-005 | BOX-ALUMINUM | 1 | |
| AGE-02593-001 | COVER-ALUMINUM | 1 | |
| AGE-02593-003 | COVER-ALUMINUM | 1 | |
| AGE-02659-001 | BLOCK 1-ALUMINUM | 1 | |
| AGE-02660-001 | BLOCK 2-ALUMINUM | 1 | |
| AGE-03185-001 | BASE-ALUMINUM | 1 | |
| AGE-03816-401 | CLAMP-ALUMINUM | 1 | |
| AGE-04101-001 | SUPPORT-ALUMINUM | 1 | |
| AGE-04362-401 | REFERENCE STANDARD, P/N 145-44131-001,ALUMINUM 7050-T7451 | 1 | |
| AGE-04900-401 | EDDY CURRENT INSTRUMENT - IMPEDANCEPLANE DISPLAY OR SIMILAR REFERENCE STANDARD, NDI, ALUMINUM7050-T7451 | 4 | |
| AGIL3 | CONTAINER 3 LITER (ALUMINUM) | 1 | |
| AHS29 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| AHS29-1A-0 | (Aluminum Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/... | 1 | |
| AHS29-1A-2 | (Aluminum Multi-hole reference standard with certificate. Contains 29 holes; 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", 7/... | 1 | |
| AHS29-C2-A1 | CUSTOM 29 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM WITH 0.015" THRU EDM NOTCH AND 0.030X0.030 CORNER NOTCH. Includes Test Report Traceable to NIST and Certificate of Conformance. | 1 | |
| AL 29-32 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-20-001. Also in 53-30-19 PART 6 PAGE 6 FIGURE 2. EDM Notches: .008", .020", .040" ( .005" W +0.00, - .002"), MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5"W x 3.75"L x .25" | 6 | |
| AL 35-45 | BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008", .020", .040" ( .005" Wide +0.00, - .002" and +/- .001" Depth), MATERIAL: 2124-T8 or 7075-T7 ALUMINUM. SIZE: 1.5"W x 3.75"L... | 8 | |
| AL29-32 | Surface Standard, .008", .020", .040" w/ special spacing, 2024T3 Aluminum | 6 | |
| AL35-45 | Surface Standard, .008", .020", .040" w/ special spacing, 2024T6 Aluminum | 8 | |
| AM-2079-108 | ALUMINUM 10" CASTER WHEEL | 2 | |
| AN670-55-31-102 | CALIBRATION REFERENCE STANDARD (CRS), MADE OF ALUMINUM WITH MULTIPLE LAYERS CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (MHIRJ) | 1 | |
| AN806-D3 | ALUMINUM PLUG | 1 | |
| AN894-4-2D | ALUMINUM ADAPTER, STRAIGHT, TUBE TO BOSS | 2 | |
| ANADJ8A | 8" ALUMINUM AN FITTING ADJUSTABLE WRENCH (BLUE-POINT®) (RED) | 1 | |
| ANDT-1096AL | 10 STEP REFERENCE BLOCK, .020".030",.040",.050",.063",.071",.080",.090",100",.125" MATERIAL: (7075-T651 ALUMINUM) | 1 | |
| AP-763 ECI | Flat Standard with Radius Notch, Cast Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| APB-NDT5209 | AVIATION PARTNERS BOEING REFERENCE STANDARD 757 Part 4 57-20-03 Page 9 Figure 2. Material: Airplane Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| ARP | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| ARS-0824-7050 | Surface reference standard, 7050-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824-7050T74 | Surface reference standard, 7050-T74 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007" W MAX | 1 | |
| ARS-0824-7075T6 | Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824-7075T7 | Surface reference standard, 7075-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824-7075T73 | Surface reference standard, 7075-T73 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/2024-T3 | Surface reference standard, 2024-T3 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824/2024-T6 | Surface reference standard, 2024-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/2024T6 | Surface reference standard, 2024-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .004" +/-.002" Wide EDM notches, .006" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.25 | 1 | |
| ARS-0824/6061T6 | Surface reference standard, 6061-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824/7475-T7 | Surface reference standard, 7475-T7 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| ARS-0824A | Surface reference standard, 7075-T6 Aluminum, with EDM notch depths of 0.008", 0.020" and 0.040" inches +/-.001 (0.2mm, 0.51mm and 1.02mm), Notch Width: .005" +/-.002" Wide EDM notches, .007" Wide MAX. Reference standard overall dImensions 1 X 4 X 0.... | 1 | |
| AS5231W08 | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, ALUMINUM | 1 | |
| ASC-10 | ASC SERIES THREADED ALUMINUM CAPS WITH SEALING DISK | 1 | |
| ASC-4 | ASC SERIES THREADED ALUMINUM CAPS WITH SEALING DISK | 1 | |
| ASC-6 | ASC SERIES THREADED ALUMINUM CAPS WITH SEALING DISK | 1 | |
| ASC-8 | ASC SERIES THREADED ALUMINUM CAPS WITH SEALING DISK | 1 | |
| ASE-WSNDT | CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. EDM NOTCH SIZE: 1.52mm(.060") LONG x 0.13mm(.0051") WIDE x 0.76mm(.030") DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| ASRS-123A | REFERENCE STANDARD ALUMINUM .008, .010, .040 | 1 | |
| ASTM E317-16/FIG X1.1/AL | ASTM E317-16 Type RA Resolution Block. Material: 7075-T6 Aluminum, Anodized for Corrosion Resistance. ASTM E317-16 FIG. X1.1 Page 12. Includes Test Report and Certificate of Conformance. | 1 | |
| ASTM-E317/FIG.6 | ASTM TYPE RA Resolution Block 7075-T6 Aluminum. ASTM-E317 FIG.6.. | 1 | |
| AT560MF-18 | HEAVY DUTY ALUMINUM BODY AIR VACUUM | 1 | |
| ATI107A-2D | PEENING TOOL ALUMINUM 1 X 3-1/8 - SHANK 401 | 1 | |
| ATI107A-2D-2 | ALUMINUM HEAD INSERT | 1 | |
| ATI107B-2D | PEENING TOOL ALUMINUM 1 X 3-1/8 - SHANK 498 | 1 | |
| ATI560AM | MINA-VAC ALUMINUM | 1 | |
| ATI560MF18 | HEAVY DUTY ALUMINUM BODY AIR VACUUM | 2 | |
| ATS-RIVNUT-6 | Aircraft Tool Supply RIVNUT-6 6-32 Aluminum Rivnut | 1 | |
| AV1000A5 | ALUMINUM TUBE WO RINGS 2 | 1 | |
| BAC27DEX2015 | ALUMINUM FOIL MARKER | 1 | |
| BACC14AG | CAP - PROTECTIVE, ALUMINUM, FLARELESS TUBE | 1 | |
| BACC14AG12 | CAP - PROTECTIVE, ALUMINUM, FLARELESS TUBE | 1 | |
| BACC14AG6 | CAP - PROTECTIVE, ALUMINUM, FLARELESS TUBE | 1 | |
| BACP20AU10D | PLUG - FIRE BOTTLE DISCHARGE TUBE, 5/8 INCH LINE, ALUMINUM | 4 | |
| BACP20AU8D | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, ALUMINUM | 1 | |
| BAT-3AL498 | .498 SHANK Aluminum Head Flush Set - USA MADE - 3-1/2" Straight | 1 | |
| BAT-3ALM | Aluminum Face Flush Set - USA MADE - 3-1/2" Straight | 1 | |
| BAT-3ALMOS | Aluminum Face Flush Set - USA MADE - 3-1/2" Offset | 1 | |
| BAT-5ALM | Aluminum Face Flush Set - USA MADE - 5-1/2" Straight | 1 | |
| BAT-5ALMOS | Aluminum Face Flush Set - USA MADE - 5-1/2" Offset | 1 | |
| BAT-RHALM | ALUMINUM Replacement Head Only - Made in the USA! | 1 | |
| BH7475-T7351 | CALIBRATION STANDARD, BOMBARDIER CHALLENGER 604, 53-21-00 FIG 602. MATERIAL: 7475-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 4 | |
| BMS 8-278 | ALUMINUM COATED GLASS FABRIC | 1 | |
| BMS 8-336 TYPE I CLASS 1 | 1145 ALUMINUM ALLOY EXPANDED FOIL PER BMS 8-336 TYPE I CLASS 1 | 1 | |
| BR-B175-01-000 | H175 TOW BAR ALUMINUM VERSION | 1 | |
| BT-J-117AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-118AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-120AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-121AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-122AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-123AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-124AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-125AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-126AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-127AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-128AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-129AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-130AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-131AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-132AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-133AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-134AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-135AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-136AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-137AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-138AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-139AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-140AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-141AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-142AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-143AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-144AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-145AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-146AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-147AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-148AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-148AL1 | Aluminum Jam Nut Socket | 2 | |
| BT-J-149AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-150AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-151AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-152AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-153AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-154AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-155AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-156AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-157AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-158AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-159AL | BT-J-159AL Jam Nut Socket - Aluminum | 2 | |
| BT-J-159AL1 | Aluminum Jam Nut Socket | 2 | |
| BT-J-160AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-161AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-162AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-163AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-164AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-165AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-166AL | Aluminum Jam Nut Socket | 2 | |
| BT-J-170AL | Aluminum Jam Nut Socket | 2 | |
| C13/C33 | PEMCO REPAIR COUPON #25 FIGURE 2. MATERIAL: 2024-T3 CLAD ALUMINUM. RIVETS: MS20426DD6. EDM NOTCH LENGTH: .26"(.66mm) and .280"(.71mm) BOTH SIDES OF FASTENER HOLE. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-CW-012 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 + NUT P/N: KFN542-3) 6 PLACES. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-CW-013 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 + NUT P/N: KFN542-3) 6 PLACES. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-CWOW-019 | LOCKHEED C-130 CALIBRATION STANDARD LOWER SURFACE PANEL. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| C130-OW-016 | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 9-4 No.1 and No. 4 Truss Mount Upper Lugs. Material: 7075-T6 Aluminum Sulfuric Acid Anodized Per MIL-A-8625 or Equivalent. Includes Test Report and Certificate of Conformance. | 2 | |
| C130-OW-017 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T6 ALUMINUM 5 PIECE STACK. FASTENER (HLT114-6-8 NUT P/N: KFN542-3) 6 PLACES. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| C130-UT-17-1 | C-130 CALIBRATION STEP STANDARD. MATERIAL:7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| C3/C29 | PEMCO REPAIR COUPON #25 FIGURE 2. MATERIAL: 2024-T3 CLAD ALUMINUM. RIVETS: MS20426DD6. EDM NOTCH LENGTH: .125"(.031mm) and .180"(.45mm) BOTH SIDES OF FASTENER HOLE. Includes Test Report and Certificate of Conformance. | 2 | |
| CA12-1508A | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T7 ALUMINUM, 54-10-11 PAGE 634A FIG.603 SHEET 21B | 1 | |
| CB-LM-532048 | REFERENCE BLOCK FIGURE 5. MATERIAL: 2024-T351 ALUMINUM WITH PRIMER. EDM NOTCH: 3mm X 3mm X .15mm ± .05mm. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1331699-003 | 8 STEP THICKNESS CALIBRATION STANDARD. STEP SIZES: .025", .030", .035", .040", .045", .055", .060", .068" +/-.001". PAD SIZE 1.0" x 1.25" TYP. MATERIAL: 7475-T7351 ALUMINUM, CHROMIC ACID ANODIZED. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617528 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CE1617529 | CALIBRATION STANDARD, BOMBARDIER TEST REFERENCE ULTRA SONIC NDI. MATERIAL: 7475-T7351 and 7040-T7451 ALUMINUM. MS90254U0805D FASTENERS. Includes Test Report and Certificate of Conformance. | 1 | |
| CEP23 | SPECIAL TRANSDUCER, 8MHZ, 70° IN ALUMINUM, CEP23 PROBE | 2 | |
| CJ193 | ALL-ALUMINUM AUDIO AMPLIFIER CHASSIS HI-FI | 1 | |
| CLAD7075-0-0.080 | ALUMINUM SHEET | 1 | |
| CM-S-229 | Adaptor Tool Set - Aluminum | 1 | |
| CM-S-229L | Adaptor Tool Set - Aluminum | 1 | |
| CM-S-264 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool Set - Aluminum | 3 | |
| CM-S-264R | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-288 | MIL-DTL-28840 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-288R | MIL-DTL-28840 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-389B | MIL-DTL-38999 Series 4 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-389BR | MIL-DTL-38999 Series 4 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-389L | MIL-DTL-38999 Series 1 Adaptor Tool Set - Aluminum | 3 | |
| CM-S-389LR | MIL-DTL-38999 Series 1 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-389S | MIL-DTL-38999 Series 2 Adaptor Tool Set - Aluminum | 3 | |
| CM-S-389T | MIL-DTL-38999 Series 3 Adaptor Tool Set - Aluminum | 4 | |
| CM-S-389TR | MIL-DTL-38999 Series 3 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015 | AS50151 and MIL-DTL-83723 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015M | AS50151 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015R | Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015RM | AS50151 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015RS | AS50151 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015S | AS50151 Adaptor Tool Set - Aluminum | 3 | |
| CM-S-602 | Pattern 602 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-801 | 2M801 and 801 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-801R | Adadptor Tool Set - Aluminum | 2 | |
| CM-S-805 | 2M805 and 805 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-805R | 2M805 and 805R Adaptor Tool Set - Aluminum | 2 | |
| CM-S-815L | MIL-C-81511 Series 1 and 3 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-815R | MIL-C-81511 Series 1, 2, 3, and 4 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-815S | MIL-C-81511 Series 2 and 4 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-837 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool Set - Aluminum | 3 | |
| CM-S-837RB | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-SJT | Adaptor Tool Set - Aluminum | 1 | |
| CM229-12 | Adaptor Tool - Aluminum | 2 | |
| CM229-14 | Adaptor Tool - Aluminum | 2 | |
| CM229-16 | Adaptor Tool - Aluminum | 2 | |
| CM229-18 | Adaptor Tool - Aluminum | 2 | |
| CM229-20 | Adaptor Tool - Aluminum | 2 | |
| CM229-22 | Adaptor Tool - Aluminum | 2 | |
| CM229-24 | Adaptor Tool - Aluminum | 2 | |
| CM229-36 | Adaptor Tool - Aluminum | 2 | |
| CM229-40 | Adaptor Tool - Aluminum | 2 | |
| CM229L-28 | Adaptor Tool - Aluminum | 2 | |
| CM229L-32 | Adaptor Tool - Aluminum | 2 | |
| CM229L-44 | Adaptor Tool - Aluminum | 2 | |
| CM229L-48 | Adaptor Tool - Aluminum | 2 | |
| CM229L-52 | Adaptor Tool - Aluminum | 2 | |
| CM264-10 | Adaptor Tool - Aluminum | 2 | |
| CM264-12 | Adaptor Tool - Aluminum | 2 | |
| CM264-14 | Adaptor Tool - Aluminum | 2 | |
| CM264-16 | Adaptor Tool - Aluminum | 2 | |
| CM264-18 | Adaptor Tool - Aluminum | 2 | |
| CM264-20 | Adaptor Tool - Aluminum | 2 | |
| CM264-22 | Adaptor Tool - Aluminum | 2 | |
| CM264-24 | Adaptor Tool - Aluminum | 2 | |
| CM264-8 | Adaptor Tool - Aluminum | 2 | |
| CM264R-10 | Adaptor Tool - Aluminum | 2 | |
| CM264R-12 | Adaptor Tool - Aluminum | 2 | |
| CM264R-14 | Adaptor Tool - Aluminum | 2 | |
| CM264R-16 | Adaptor Tool - Aluminum | 2 | |
| CM264R-18 | Adaptor Tool - Aluminum | 2 | |
| CM264R-20 | Adaptor Tool - Aluminum | 2 | |
| CM264R-22 | Adaptor Tool - Aluminum | 2 | |
| CM264R-24 | Adaptor Tool - Aluminum | 2 | |
| CM264R-8 | Adaptor Tool - Aluminum | 2 | |
| CM288-11A | Adaptor Tool - Aluminum | 2 | |
| CM288-11B | Adaptor Tool - Aluminum | 2 | |
| CM288-13A | Adaptor Tool - Aluminum | 2 | |
| CM288-13B | Adaptor Tool - Aluminum | 2 | |
| CM288-15A | Adaptor Tool - Aluminum | 2 | |
| CM288-15B | Adaptor Tool - Aluminum | 2 | |
| CM288-17A | Adaptor Tool - Aluminum | 2 | |
| CM288-17B | Adaptor Tool - Aluminum | 2 | |
| CM288-19A | Adaptor Tool - Aluminum | 2 | |
| CM288-19B | Adaptor Tool - Aluminum | 2 | |
| CM288-23A | Adaptor Tool - Aluminum | 2 | |
| CM288-23B | Adaptor Tool - Aluminum | 2 | |
| CM288-25A | Adaptor Tool - Aluminum | 2 | |
| CM288-25B | Adaptor Tool - Aluminum | 2 | |
| CM288-29A | Adaptor Tool - Aluminum | 2 | |
| CM288-29B | Adaptor Tool - Aluminum | 2 | |
| CM288-33A | Adaptor Tool - Aluminum | 2 | |
| CM288-33B | Adaptor Tool - Aluminum | 2 | |
| CM288R-11A | Adaptor Tool - Aluminum | 2 | |
| CM288R-11B | Adaptor Tool - Aluminum | 2 | |
| CM288R-13A | Adaptor Tool - Aluminum | 2 | |
| CM288R-13B | Adaptor Tool - Aluminum | 2 | |
| CM288R-15A | Adaptor Tool - Aluminum | 2 | |
| CM288R-15B | Adaptor Tool - Aluminum | 2 | |
| CM288R-17A | Adaptor Tool - Aluminum | 2 | |
| CM288R-17B | Adaptor Tool - Aluminum | 2 | |
| CM288R-19A | Adaptor Tool - Aluminum | 2 | |
| CM288R-19B | Adaptor Tool - Aluminum | 2 | |
| CM288R-23A | Adaptor Tool - Aluminum | 2 | |
| CM288R-23B | Adaptor Tool - Aluminum | 2 | |
| CM288R-25A | Adaptor Tool - Aluminum | 2 | |
| CM288R-25B | Adaptor Tool - Aluminum | 2 | |
| CM288R-29A | Adaptor Tool - Aluminum | 2 | |
| CM288R-29B | Adaptor Tool - Aluminum | 2 | |
| CM288R-33A | Adaptor Tool - Aluminum | 2 | |
| CM288R-33B | Adaptor Tool - Aluminum | 2 | |
| CM389B-11 | Adaptor Tool - Aluminum | 2 | |
| CM389B-13 | Adaptor Tool - Aluminum | 2 | |
| CM389B-15 | Adaptor Tool - Aluminum | 2 | |
| CM389B-17 | Adaptor Tool - Aluminum | 2 | |
| CM389B-19 | Adaptor Tool - Aluminum | 2 | |
| CM389B-21 | Adaptor Tool - Aluminum | 2 | |
| CM389B-23 | Adaptor Tool - Aluminum | 2 | |
| CM389B-25 | Adaptor Tool - Aluminum | 2 | |
| CM389BR-11 | Adaptor Tool - Aluminum | 2 | |
| CM389BR-13 | Adaptor Tool - Aluminum | 2 | |
| CM389BR-15 | Adaptor Tool - Aluminum | 2 | |
| CM389BR-17 | Adaptor Tool - Aluminum | 2 | |
| CM389BR-19 | Adaptor Tool - Aluminum | 2 | |
| CM389BR-21 | Adaptor Tool - Aluminum | 2 | |
| CM389BR-23 | Adaptor Tool - Aluminum | 2 | |
| CM389BR-25 | Adaptor Tool - Aluminum | 2 | |
| CM389L-11 | Adaptor Tool - Aluminum | 2 | |
| CM389L-13 | Adaptor Tool - Aluminum | 3 | |
| CM389L-15 | Adaptor Tool - Aluminum | 2 | |
| CM389L-17 | Adaptor Tool - Aluminum | 2 | |
| CM389L-19 | Adaptor Tool - Aluminum | 2 | |
| CM389L-21 | Adaptor Tool - Aluminum | 2 | |
| CM389L-23 | Adaptor Tool - Aluminum | 2 | |
| CM389L-25 | Adaptor Tool - Aluminum | 2 | |
| CM389L-9 | Adaptor Tool - Aluminum | 2 | |
| CM389LR-11 | Adaptor Tool - Aluminum | 2 | |
| CM389LR-13 | Adaptor Tool - Aluminum | 2 | |
| CM389LR-15 | Adaptor Tool - Aluminum | 2 | |
| CM389LR-17 | Adaptor Tool - Aluminum | 2 | |
| CM389LR-19 | Adaptor Tool - Aluminum | 2 | |
| CM389LR-21 | Adaptor Tool - Aluminum | 2 | |
| CM389LR-23 | Adaptor Tool - Aluminum | 2 | |
| CM389LR-25 | Adaptor Tool - Aluminum | 2 | |
| CM389LR-9 | Adaptor Tool - Aluminum | 2 | |
| CM389S-10 | Adaptor Tool - Aluminum | 2 | |
| CM389S-12 | Adaptor Tool - Aluminum | 2 | |
| CM389S-14 | Adaptor Tool - Aluminum | 2 | |
| CM389S-16 | Adaptor Tool - Aluminum | 2 | |
| CM389S-18 | Adaptor Tool - Aluminum | 2 | |
| CM389S-20 | Adaptor Tool - Aluminum | 2 | |
| CM389S-22 | Adaptor Tool - Aluminum | 2 | |
| CM389S-24 | Adaptor Tool - Aluminum | 2 | |
| CM389S-8 | Adaptor Tool - Aluminum | 2 | |
| CM389T-11A | Adaptor Tool - Aluminum | 2 | |
| CM389T-11B | Adaptor Tool - Aluminum | 2 | |
| CM389T-13A | Adaptor Tool - Aluminum | 2 | |
| CM389T-13B | Adaptor Tool - Aluminum | 2 | |
| CM389T-15A | Adaptor Tool - Aluminum | 2 | |
| CM389T-15B | Adaptor Tool - Aluminum | 2 | |
| CM389T-17A | Adaptor Tool - Aluminum | 3 | |
| CM389T-17B | Adaptor Tool - Aluminum | 2 | |
| CM389T-19A | Adaptor Tool - Aluminum | 2 | |
| CM389T-19B | Adaptor Tool - Aluminum | 2 | |
| CM389T-21A | Adaptor Tool - Aluminum | 2 | |
| CM389T-21B | Adaptor Tool - Aluminum | 2 | |
| CM389T-23A | Adaptor Tool - Aluminum | 2 | |
| CM389T-23B | Adaptor Tool - Aluminum | 2 | |
| CM389T-25A | Adaptor Tool - Aluminum | 3 | |
| CM389T-25B | Adaptor Tool - Aluminum | 2 | |
| CM389T-9A | Adaptor Tool - Aluminum | 2 | |
| CM389T-9B | Adaptor Tool - Aluminum | 2 | |
| CM389TR-11A | Adaptor Tool - Aluminum | 2 | |
| CM389TR-11B | Adaptor Tool - Aluminum | 2 | |
| CM389TR-13A | Adaptor Tool - Aluminum | 2 | |
| CM389TR-13B | Adaptor Tool - Aluminum | 2 | |
| CM389TR-15A | Adaptor Tool - Aluminum | 2 | |
| CM389TR-15B | Adaptor Tool - Aluminum | 2 | |
| CM389TR-17A | Adaptor Tool - Aluminum | 2 | |
| CM389TR-17B | Adaptor Tool - Aluminum | 2 | |
| CM389TR-19A | Adaptor Tool - Aluminum | 2 | |
| CM389TR-19B | Adaptor Tool - Aluminum | 2 | |
| CM389TR-21A | Adaptor Tool - Aluminum | 2 | |
| CM389TR-21B | Adaptor Tool - Aluminum | 2 | |
| CM389TR-23A | Adaptor Tool - Aluminum | 2 | |
| CM389TR-23B | Adaptor Tool - Aluminum | 2 | |
| CM389TR-25A | Adaptor Tool - Aluminum | 2 | |
| CM389TR-25B | Adaptor Tool - Aluminum | 2 | |
| CM389TR-9A | Adaptor Tool - Aluminum | 2 | |
| CM389TR-9B | Adaptor Tool - Aluminum | 2 | |
| CM5015-10 | Adaptor Tool - Aluminum | 2 | |
| CM5015-12 | Adaptor Tool - Aluminum | 2 | |
| CM5015-14 | Adaptor Tool - Aluminum | 2 | |
| CM5015-16 | Adaptor Tool - Aluminum | 2 | |
| CM5015-18 | Adaptor Tool - Aluminum | 2 | |
| CM5015-20 | Adaptor Tool - Aluminum | 2 | |
| CM5015-22 | Adaptor Tool - Aluminum | 2 | |
| CM5015-24 | Adaptor Tool - Aluminum | 2 | |
| CM5015-28 | Adaptor Tool - Aluminum | 2 | |
| CM5015-32 | Adaptor Tool - Aluminum | 2 | |
| CM5015-36 | Adaptor Tool - Aluminum | 3 | |
| CM5015-40 | Adaptor Tool - Aluminum | 2 | |
| CM5015-44 | Adaptor Tool - Aluminum | 2 | |
| CM5015-48 | Adaptor Tool - Aluminum | 2 | |
| CM5015-8 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-10 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-12 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-14 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-16 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-18 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-20 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-22 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-24 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-28 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-32 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-36 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-40 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-44 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-48 | Adaptor Tool - Aluminum | 2 | |
| CM5015R-8 | Adaptor Tool - Aluminum | 2 | |
| CM602-10A | Adaptor Tool - Aluminum | 2 | |
| CM602-10B | Adaptor Tool - Aluminum | 2 | |
| CM602-12A | Adaptor Tool - Aluminum | 2 | |
| CM602-12B | Adaptor Tool - Aluminum | 2 | |
| CM602-14A | Adaptor Tool - Aluminum | 2 | |
| CM602-14B | Adaptor Tool - Aluminum | 2 | |
| CM602-16A | Adaptor Tool - Aluminum | 2 | |
| CM602-16B | Adaptor Tool - Aluminum | 2 | |
| CM602-18A | Adaptor Tool - Aluminum | 2 | |
| CM602-18B | Adaptor Tool - Aluminum | 2 | |
| CM602-20A | Adaptor Tool - Aluminum | 2 | |
| CM602-20B | Adaptor Tool - Aluminum | 2 | |
| CM602-22A | Adaptor Tool - Aluminum | 2 | |
| CM602-22B | Adaptor Tool - Aluminum | 2 | |
| CM602-24A | Adaptor Tool - Aluminum | 2 | |
| CM602-24B | Adaptor Tool - Aluminum | 2 | |
| CM602-8A | Adaptor Tool - Aluminum | 2 | |
| CM602-8B | Adaptor Tool - Aluminum | 2 | |
| CM815L-10A | Adaptor Tool - Aluminum | 2 | |
| CM815L-10B | Adaptor Tool - Aluminum | 2 | |
| CM815L-14A | Adaptor Tool - Aluminum | 2 | |
| CM815L-14B | Adaptor Tool - Aluminum | 2 | |
| CM815L-16A | Adaptor Tool - Aluminum | 2 | |
| CM815L-16B | Adaptor Tool - Aluminum | 2 | |
| CM815L-18A | Adaptor Tool - Aluminum | 2 | |
| CM815L-18B | Adaptor Tool - Aluminum | 2 | |
| CM815L-20A | Adaptor Tool - Aluminum | 2 | |
| CM815L-20B | Adaptor Tool - Aluminum | 2 | |
| CM815L-22A | Adaptor Tool - Aluminum | 2 | |
| CM815L-22B | Adaptor Tool - Aluminum | 2 | |
| CM815L-24A | Adaptor Tool - Aluminum | 2 | |
| CM815L-24B | Adaptor Tool - Aluminum | 2 | |
| CM815L-8A | Adaptor Tool - Aluminum | 2 | |
| CM815L-8B | Adaptor Tool - Aluminum | 2 | |
| CM815R-10 | Adaptor Tool - Aluminum | 2 | |
| CM815R-14 | Adaptor Tool - Aluminum | 2 | |
| CM815R-16 | Adaptor Tool - Aluminum | 2 | |
| CM815R-18 | Adaptor Tool - Aluminum | 2 | |
| CM815R-20 | Adaptor Tool - Aluminum | 2 | |
| CM815R-22 | Adaptor Tool - Aluminum | 2 | |
| CM815R-24 | Adaptor Tool - Aluminum | 2 | |
| CM815R-8 | Adaptor Tool - Aluminum | 2 | |
| CM815S-10A | Adaptor Tool - Aluminum | 2 | |
| CM815S-10B | Adaptor Tool - Aluminum | 2 | |
| CM815S-14A | Adaptor Tool - Aluminum | 2 | |
| CM815S-14B | Adaptor Tool - Aluminum | 2 | |
| CM815S-16A | Adaptor Tool - Aluminum | 2 | |
| CM815S-16B | Adaptor Tool - Aluminum | 2 | |
| CM815S-18A | Adaptor Tool - Aluminum | 2 | |
| CM815S-18B | Adaptor Tool - Aluminum | 2 | |
| CM815S-8 | Adaptor Tool - Aluminum | 2 | |
| CM837-10A | Adaptor Tool - Aluminum | 2 | |
| CM837-10B | Adaptor Tool - Aluminum | 2 | |
| CM837-12A | Adaptor Tool - Aluminum | 2 | |
| CM837-12B | Adaptor Tool - Aluminum | 2 | |
| CM837-14A | Adaptor Tool - Aluminum | 2 | |
| CM837-14B | Adaptor Tool - Aluminum | 2 | |
| CM837-16A | Adaptor Tool - Aluminum | 2 | |
| CM837-16B | Adaptor Tool - Aluminum | 2 | |
| CM837-18A | Adaptor Tool - Aluminum | 2 | |
| CM837-18B | Adaptor Tool - Aluminum | 2 | |
| CM837-20A | Adaptor Tool - Aluminum | 2 | |
| CM837-20B | Adaptor Tool - Aluminum | 2 | |
| CM837-22A | Adaptor Tool - Aluminum | 2 | |
| CM837-22B | Adaptor Tool - Aluminum | 2 | |
| CM837-24A | Adaptor Tool - Aluminum | 2 | |
| CM837-24B | Adaptor Tool - Aluminum | 2 | |
| CM837-28A | Adaptor Tool - Aluminum | 2 | |
| CM837-28B | Adaptor Tool - Aluminum | 2 | |
| CM837-8A | Adaptor Tool - Aluminum | 2 | |
| CM837-8B | Adaptor Tool - Aluminum | 2 | |
| CM837-8C | Adaptor Tool - Aluminum | 2 | |
| CM837-8D | Adaptor Tool - Aluminum | 2 | |
| CM837RB-10 | Adaptor Tool - Aluminum | 2 | |
| CM837RB-12 | Adaptor Tool - Aluminum | 2 | |
| CM837RB-14 | Adaptor Tool - Aluminum | 2 | |
| CM837RB-16 | Adaptor Tool - Aluminum | 2 | |
| CM837RB-18 | Adaptor Tool - Aluminum | 2 | |
| CM837RB-20 | Adaptor Tool - Aluminum | 2 | |
| CM837RB-22 | Adaptor Tool - Aluminum | 2 | |
| CM837RB-24 | Adaptor Tool - Aluminum | 2 | |
| CM837RB-8 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-10 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-12 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-14 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-16 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-18 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-20 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-22 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-24 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-8 | Adaptor Tool - Aluminum | 2 | |
| CP0214ANBEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) | 1 | |
| CP0214ANFEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8" - 3/32") | 3 | |
| CP0214ANGEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8" - 3/32") | 1 | |
| CP0214ENBEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8" - 3/32") | 1 | |
| CP0214ENFEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8" - 3/32") | 1 | |
| CP0214ENGEL | Chicago Pneumatic® Alligator Yoke Riveters (Capacity (aluminum-steel): 1/8" - 3/32") (Closed yoke height: 7.8") (Overall length: 9-3/16" (23 cm)) (Reach: 1-1/2") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8" - 3/32") | 1 | |
| CP0341CUDEL | Chicago Pneumatic® 360° Swivel C-Yoke Riveter (Capacity (aluminum-steel): 3/16" - 5/32") (Closed yoke height: 25/32") (Overall length: 17-1/2" (45 cm)) (Reach: 2-1/8") (Add to cart: Add To Cart) | 1 | |
| CP0351ASGEL | Chicago Pneumatic® Heavy-Duty Alligator Yoke Riveters (Capacity (aluminum-steel): 5/32" - 1/8") (Closed yoke height: 7/8") (Overall length: 19-1/2" (50 cm)) (Reach: 2-7/8") (Type: Single Cylinder) (Add to cart: Add To Cart) | 1 | |
| CP0351ASKEL | Chicago Pneumatic® Heavy-Duty Alligator Yoke Riveters (Capacity (aluminum-steel): 5/32" - 1/8") (Closed yoke height: 7/8") (Overall length: 19-1/2" (50 cm)) (Reach: 2-7/8") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8 | 1 | |
| CP0351ASVEL | Chicago Pneumatic® Heavy-Duty Alligator Yoke Riveters (Capacity (aluminum-steel): 5/32" - 1/8") (Closed yoke height: 7/8") (Overall length: 19-1/2" (50 cm)) (Reach: 2-7/8") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8 | 1 | |
| CP0351CUDEL | Chicago Pneumatic® C-Yoke Riveters (Capacity (aluminum-steel): 3/16" - 5/32") (Closed yoke height: 25/32") (Overall length: 17-1/2" (45 cm)) (Reach: 2-1/8") (Type: Single Cylinder) (Add to cart: Add To Cart) | 1 | |
| CP0351ESGEL | Chicago Pneumatic® Heavy-Duty Alligator Yoke Riveters (Capacity (aluminum-steel): 5/32" - 1/8") (Closed yoke height: 7/8") (Overall length: 19-1/2" (50 cm)) (Reach: 2-7/8") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8 | 3 | |
| CP0351ESKEL | Chicago Pneumatic® Heavy-Duty Alligator Yoke Riveters (Capacity (aluminum-steel): 5/32" - 1/8") (Closed yoke height: 7/8") (Overall length: 19-1/2" (50 cm)) (Reach: 2-7/8") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8 | 2 | |
| CP0351ESREL | Chicago Pneumatic® Heavy-Duty Alligator Yoke Riveters (Capacity (aluminum-steel): 5/32" - 1/8") (Closed yoke height: 7/8") (Overall length: 19-1/2" (50 cm)) (Reach: 2-7/8") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8 | 3 | |
| CP0351ESVEL | Chicago Pneumatic® Heavy-Duty Alligator Yoke Riveters (Capacity (aluminum-steel): 5/32" - 1/8") (Closed yoke height: 7/8") (Overall length: 19-1/2" (50 cm)) (Reach: 2-7/8") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/8 | 3 | |
| CP0351FUDEL | Chicago Pneumatic® C-Yoke Riveters (Capacity (aluminum-steel): 3/16" - 5/32") (Closed yoke height: 25/32") (Overall length: 17-1/2" (45 cm)) (Reach: 2-1/8") (Type: Single Cylinder) (Add to cart: Add To Cart) (Capacity (aluminum-steel): 1/4" - 7/32") (Clos | 2 | |
| CP4444RURAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) | 2 | |
| CP4444RUSAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 3 | |
| CP4444RUTAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 4 | |
| CP4447RUSAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4447RUTAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4447RUVAB | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4450-2 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4450-3 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 2 | |
| CP4450-4 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 4 | |
| CP4450-S-2 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Add to cart: Add To Cart) | 1 | |
| CP4450-S-3 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/32") (Add to cart: Add To Cart) | 1 | |
| CP4450-S-4 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/32") (Add to cart: Add To Cart) (Blows per minute: 1740) (Capaci | 1 | |
| CP4475-3 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4475-4 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CP4475-6 | Chicago Pneumatic® Rivet Guns (Blows per minute: 2580) (Capacity (aluminum - steel): 1/8" - 3/32") (Overall length: 6-11/24" (165 mm)) (Type: Standard .401 Shank) (Add to cart: Add To Cart) (Blows per minute: 2160) (Capacity (aluminum - steel): 3/16" - 5/ | 1 | |
| CRS 1 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.020", 0.040", 0.060", 0.100", 0.150", 0.200" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS 2 AL6061 | 6 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.100", 0.250", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 6061-T6 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CRS AL2024 | 5 STEP CALIBRATION BLOCK. STEP THICKNESS: 0.200", 0.400", 0.600", 0.800", 1.000" +/- .001". STEP PAD SIZE: 1.0" x 1.0". MATERIAL: 2024-T351 ALUMINUM. Includes certification Report Traceable to NIST and Certificate of Conformance. | 1 | |
| CW-23 OW-47 | C-130 CALIBRATION STANDARD. MATERIAL:7075-T7 or Equivalent Aluminum. FASTENER (NAS517-3-2) 2 Places. Includes Test Report and Certificate of Conformance For Standard and Certification for material and Fasteners. | 1 | |
| DAC ETBS AL-1T 2024-T3 0.063 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5, 06-10-02.005. MATERIAL: 2024-T3 ALUMINUM 0.063". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T 7075-T6 0.120 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1, 7075-T6 Aluminum | 1 | |
| DAC ETBS AL-1T 7075-T6 0.120:DAC ETBS AL-1T 7075-T73 0.120 | DC Reference Standard, ETLF PROC 5, 06-10-02.005:FIG1 PG F1, 7075-T73 Aluminum | 1 | |
| DAC ETBS AL-1T/ 0.032 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 7075-T7 ALUMINUM .032". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/ 0.071 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 2024-T3 ALUMINUM .071". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/ 0.090 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 7075-T6 ALUMINUM .090". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETBS AL-1T/0.080 | MD-80 REFERENCE STANDARD ETFL PROCEDURE 5 Part 6 06-10-02 Page F1 Figure 1. Material: 2024-T3 ALUMINUM .080". Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH AL | 7075-T6 Aluminum Multi-purpose Reference Standard 1/8" to 3/4" holes similar to RH120 | 1 | |
| DAC ETOH-AL-1/2 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/2 (0.500) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/4 (0.250) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-1/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 1/8 (0.125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-11/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 11/16 (0.6875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/16 (0.1875) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/4 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/4 (0.750) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-3/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 3/8 (0.375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/16 (0.3125) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-5/8 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 5/8 (0.625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-7/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 7/16 (0.4375) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL-9/16 | McDonnell Douglas Open Hole Eddy Current Reference Standard Part 6 06-20-01 Page F10 Figure 4. Material: Aluminum. 9/16 (0.5625) Inch Hole. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC ETOH-AL.04 | 717-200 OPEN HOLE REFERENCE STANDARD. FIG. 1.20, PAGE 1. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| DAC GSET AL.01 | 7075-T6 Aluminum Multi-purpose Reference Standard | 1 | |
| DAC GSET AL.01-MV | 7075-T6 Aluminum Multi-purpose Reference Standard, Modified Version, Surface notches are only .125"long from edge of standard | 1 | |
| DAC GSET AL.01-N1-N2 | General Surface Aluminum HFET Reference Standard MD-11 section 2-1 page 1 figure 1.1 | 1 | |
| DAC GSET MG.01 | Aluminum-Broze (10%-20% IACS) Reference Standard | 1 | |
| DAC GSET-AL.01 | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 FIG.1 SHEETS 1-3. MATERIAL: 7075-T6 ALUMINUM PER QQ-Q-250/12. | 1 | |
| DAC GSET-MG | MCDONNELL DOUGLAS REFERENCE STANDARD 06-20-01 ALUMINUM BRONZE | 1 | |
| DAK20 | PC INSERTION TOOL - MS24256A20 / TOOL FOR INSERTING AND REMOVING ELECTRICAL PINS BELONGING TO THE KIT / ALUMINUM | 11 | |
| DAT03AEKT4012 | TOOLKIT, SIZE 4 ALUMINUM | 3 | |
| DAT03AEKT4013 | TOOLKIT, SIZE 6 ALUMINUM | 3 | |
| DAT03AEKT4059A | PERMALITE UNIVERSAL FIELD REPAIR KIT (ALUMINUM) | 1 | |
| DAT06AETA1000 | ALUMINUM 1,500 PSI, GREEN BAND | 1 | |
| DC-10 FIG603/23 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T6 ALUMINUM, 54-10-11 PAGE 635 FIG.603 SHEET 23 | 1 | |
| DC-10 FIG603/24-Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 636C FIG.603 SHEET 24 | 1 | |
| DC-10 FIG603/27Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 639 FIG.603 SHEET 27 | 1 | |
| DC-10 FIG603/28LOWER/Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (LOWER) | 1 | |
| DC-10 FIG603/28UPPER/Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 640 FIG.603 SHEET 28 (UPPER) | 1 | |
| DC-10 FIG603/29Al | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 641 FIG.603 SHEET 29 | 1 | |
| DC-10 FIG603/30-AL | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 7075-T6 ALUMINUM, 54-10-11 PAGE 642 FIG.603 SHEET 30 | 1 | |
| DC-10 FIG603/43 | DOUGLAS DC-10 WING PYLON REFERENCE STANDARD 2024-T351 ALUMINUM, 54-10-11 PAGE 655 FIG.603 SHEET 43 | 1 | |
| DC6571-805 | HIGH TEMPERATURE ALUMINUM PAINT | 1 | |
| DFX-DF900DX | ALUMINUM DENT PULLER | 1 | |
| DMC1358AL | DMC1358AL - Aluminum Jam Nut Tool Kit | 2 | |
| DRT74469 | Messier-Dowty Reference Standard, Aluminum, Appendix A Service Bulletin No. 146-32-174 Pg 4 Fg A2 | 2 | |
| DS-AJ-452-11 | ALUMINUM AIRCRAFT MAINTENANCE LADDER | 1 | |
| DS-AJ-452-3 | ALUMINUM AIRCRAFT MAINTENANCE LADDER | 1 | |
| DS-AJ-542-6 | ALUMINUM AIRCRAFT MAINTENANCE LADDER | 1 | |
| E53-002A | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler = .040"..Filler = .031"..Stringer = .063" | 1 | |
| E53-002A. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .031"..Doubler 1 = .040"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002B | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler = .050"..Filler = .047"..Stringer = .063" | 1 | |
| E53-002B. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .047"..Doubler 1 = .050"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002C | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler = .063"..Filler = .055"..Stringer = .063" | 1 | |
| E53-002C. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .055"..Doubler 1 = .063"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002D | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler = .080"..Filler = .071"..Stringer = .063" | 1 | |
| E53-002D. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .071"..Doubler 1 = .080"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002E | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler = .098"..Filler = .080"..Stringer = .063" | 1 | |
| E53-002E. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .080"..Doubler 1 = .098"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-002F | EMBRAER 170/175 REFERENCE STANDARD PT 6 53-06-00 pages 6-9. Material: 2024-T3 Alclad Aluminum. Single Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler = .110"..Filler = .098"..Stringer = .063" | 1 | |
| E53-002F. | EMBRAER 170/175 REFERENCE STANDARD PT 6 51-06-00 pages 7-10. Material: 2024-T3 Alclad Aluminum. Dual Doubler Configuration. Includes Test Report and Certificate of Conformance...Skin Thickness = .098"..Doubler 1 = .110"..Doubler 2 = .063"..Filler = .... | 1 | |
| E53-004 | EMBRAER 190/195 REFERENCE STANDARD PT 6 53-23-00 pages 1-13. Material: 2024-T3 Alclad Aluminum. Repair Doubler Configuration. Includes Test Report and Certificate of Conformance. Repair Doubler = .125" Fus Skin Thickness = .098" Filler = .098" In | 1 | |
| E53‐006 | CALIBRATION BLOCK DIMENSIONS 95 X 90 MM, WITH 03 ALUMINUM PLATES, EDM NOTCH 10.6 MM | 1 | |
| E54‐004 | CALIBRATION BLOCK MADE FROM TITANIUM ALLOY AND ALUMINUM ALLOY AL 7075 T351 | 1 | |
| E57‐009 | CALIBRATION BLOCK, ALUMINUM ALLOY WITH EDM NOTCHES | 1 | |
| E57‐010 | CALIBRATION BLOCK, ALUMINUM ALLOY WITH EDM NOTCHES | 1 | |
| ECF201A | FLASHLIGHT, ALUMINUM | 3 | |
| ECFBAR300-7 | ALUMINUM BODY WITH PCB SUPPORT | 1 | |
| ECFDB358-18 | ALUMINUM HOUSING | 1 | |
| ECFDE402-6 | ALUMINUM HOUSING | 1 | |
| ECFLG032-3 | ALUMINUM HOUSING | 1 | |
| ECFLI082B | ALUMINUM FLASHLIGHT BLK | 1 | |
| ECFLI082B-8 | ALUMINUM HOUSING BLACK | 1 | |
| ECFLI082G | ALUMINUM FLASHLIGHT GRN | 1 | |
| ECFLI082G-8 | ALUMINUM HOUSING GREEN | 1 | |
| ECFLI082O | ALUMINUM FLASHLIGHT ORG | 1 | |
| ECFLI082O-8 | ALUMINUM HOUSING ORANGE | 1 | |
| ECFLI082R | ALUMINUM FLASHLIGHT | 1 | |
| ECPNE022-3 | ALUMINUM HOUSING | 1 | |
| ECPNG032 | ALUMINUM PEN LIGHT | 1 | |
| ECPNG032-12 | ALUMINUM HOUSING | 1 | |
| ECPNG032G | ALUMINUM PEN LIGHT GREEN | 1 | |
| ECPNG032G-12 | ALUMINUM HOUSING | 1 | |
| ECPNG032O | ALUMINUM PEN LIGHT ORANGE | 1 | |
| ECPNG032O-12 | ALUMINUM HOUSING | 1 | |
| ECPNG032R | ALUMINUM PEN LIGHT RED | 1 | |
| ECPNG032U | ALUMINUM PEN LIGHT | 1 | |
| ECPNJ032 | ALUMINUM SLIM POCKET LIGHT | 1 | |
| ECPRA072-E | FRONT ALUMINUM HOUSING | 1 | |
| ECPRA072-H | BACK ALUMINUM HOUSING | 1 | |
| ECPRA072GR | ALUMINUM PROJECT LIGHT GREEN | 1 | |
| ECPRA072O | ALUMINUM PROJECT LIGHT ORANGE | 1 | |
| ECRS-0824/AL | ALUMINUM CALIBRATION STANDARD | 1 | |
| ECSPA032-1 | ALUMINUM END CAP | 1 | |
| ECSPE102-04G | EXTRUDED ALUMINUM HOUSING GRN | 1 | |
| ECSPE102-04O | EXTRUDED ALUMINUM HOUSING ORG | 1 | |
| ECUB128-1 | ECUB128 ALUMINUM HOLDER | 1 | |
| EEBC100A-12 | TRANSFORMER ALUMINUM | 1 | |
| EMB-E54-003 | CALIBRATION BLOCK ALUMINUM 7050-T7452 | 1 | |
| EN 12223 | NDE TECH CALIBRATION BLOCK NO.1 K1 ALUMINUM EN12223 (IIW REF BLOCK) | 1 | |
| ET-55C-2 | BOMBARDIER / CHALLENGER 604 10 STEP ALUMINUM WEDGE, ET-53-30-012 PT 6 FIG. 2 . STEP THICKNESSES:, .024", .028", .031", .035", .039", .044", .048", .052", .056" .059" +/-0.002, . PAD SIZE: 1.0" x 1.0" +/-0.010", Material: 2024-T3 ALUMINUM. Chromic ano | 1 | |
| ET-55C-3 | BOMBARDIER / CHALLENGER 604 10 STEP ALUMINUM WEDGE, ET-53-30-012 PT 6 FIG. 2 . STEP THICKNESSES:, .024", .028", .031", .035", .039", .044", .048", .052", .056" .059" +/-0.002, . PAD SIZE: 1.0" x 1.0" +/-0.010", Material: 2124-T8 or 7075-T7 ALUMINUM. | 1 | |
| ET002 | BRANTLY B2 MAIN ROTOR BLADE ROOT SKIN CALIBRATION STANDARD PG.2. MATERIAL: 2024-T3 ALUMINUM BARE & CLAD. Includes Test Report and Certificate of Conformance. | 1 | |
| ET6018 | CUSTOM SIKORSKY S61-N FLAT BOTTOM HOLE AFT REAR FUSELAGE REFERENCE STANDARD 51-10-05 FIGURE 7 (SHEETS 1-5). MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certiicate of Conformance. | 1 | |
| ETD2015-145-108529 | CUSTOM EDDY CURRENT STANDARD, 2024-T351 ALUMINUM .063"/.050". MS20426AD5 CSK RIVET 2 PLACES | 1 | |
| EX604-60024 | CALIBRATION REFERENCE STANDARD MULTI-LAYERED ALUMINUM ALLOY FASTENED ASSEMBLY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 2 | |
| EX604−60024 | Calibration reference standard multi−layered aluminum alloy fastened assembly that contains electrical discharge machined notches (Bombardier Inc.) | 2 | |
| EXBC670-59045 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59046 | CALIBRATION REFERENCE STANDARD ASSEMBLY ALUMINUM ALLOY CONTAINS 0.250 IN. (6.35 MM) LONG ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59133 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59142 | CALIBRATION REFERENCE STANDARD MADE FROM ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59145 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59156 | CALIBRATION REFERENCE STANDARD MADE FROM MULTIPLE ALUMINUM ALLOY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59162 | CALIBRATION REFERENCE STANDARD, ALUMINUM ALLOY THAT CONTAINS ELECTRICAL DISCHARGE MACHINED NOTCH. (MHIRJ OR EQUIVALENT) | 1 | |
| EXBC670-59177 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59180 | CALIBRATION REFERENCE STANDARD ALUMINUM ALLOY MULTIPLE LAYERS FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED NOTCHES (BOMBARDIER INC.) | 1 | |
| EXBC670-59181 | CALIBRATION REFERENCE STANDARD ALUMINUM MULTIPLE LAYER FASTENED ASSEMBLY CONTAINING ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES. (BOMBARDIER INC.) | 1 | |
| EXBC670−59044 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| EXBC670−59045 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59046 | Calibration reference standard assembly aluminum alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59065 | Calibration reference standard assembly aluminum and steel alloy contains 0.250 in. (6.35 mm) long electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59133 | Calibration reference standard made from aluminum alloy containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59134 | Calibration reference standard aluminum alloy that contains electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59139−001 | Calibration reference standard made from aluminum alloy that contains electrical discharge machined notches (Bombardier inc.) | 1 | |
| EXBC670−59142 | Calibration Reference Standard made from aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59145 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59153 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59156 | Calibration Reference Standard made from multiple aluminum alloy containing electrical discharge machined (EDM) notches (Bombardier Inc.) | 1 | |
| EXBC670−59162 | Calibration Reference Standard aluminum alloy that contains electrical discharge machined notch. (Bombardier Inc. or equivalent) | 1 | |
| EXBC670−59177 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59180 | Calibration reference standard aluminum alloy multiple layers fastened assembly containing electrical discharge machined notches (Bombardier Inc.) | 1 | |
| EXBC670−59181 | Calibration reference standard aluminum multiple layer fastened assembly containing electrical discharge machined (EDM) notches. (Bombardier Inc.) | 1 | |
| F80049-17 | ASSEMBLY - LOCK, FLIGHT CONTROLS (USED WITH VALVES P/N 10-60710-2 AND 10-60710-6) 5.0 INCH X 1.1 INCH X 0.25 INCH ALUMINUM PLATE | 6 | |
| F80049-46 | ASSEMBLY - LOCK, FLIGHT CONTROLS (USED WITH VALVES P/N 10-60710-2 AND 10-60710-6) 5.0 INCH X 1.1 INCH X 0.25 INCH ALUMINUM PLATE | 17 | |
| F80049-66 | ASSEMBLY - LOCK, FLIGHT CONTROLS (USED WITH VALVES P/N 10-60710-2 AND 10-60710-6) 5.0 INCH X 1.1 INCH X 0.25 INCH ALUMINUM PLATE | 14 | |
| FLASHLIGHT, LED, ALUMINUM, 1 WATT, (3) AAA BATTERIES | FLASHLIGHT, LED, ALUMINUM, 1 WATT, (3) AAA BATTERIES | 1 | |
| FOKKER-50/60 | FOKKER 50/60 CALIBRATION STANDARD PART 6 53-30-09 PAGE 6 FIGURE 3. MATERIAL: 2024-T3 ALUMINUM. NOTE: ***DOES NOT INCLUDE 3M BELLY PROTECTIVE TAPE 8641 | 1 | |
| G-1111-5DD-30A | BOLT, AN ALUMINUM | 1 | |
| G32057-1 | TEST SUPPORT FIXTURE, ALUMINUM DEACTUATOR KIT | 2 | |
| GER31-004128 | SPIRE SILVER/ALUMINUM | 1 | |
| GS24516-1 | ALUMINUM NICKEL MASKING TOOL | 1 | |
| GSE 333 | REFERENCE STANDARD, P/N 145-44131-001,ALUMINUM 7050-T7451 | 1 | |
| GSE041 | FITTING-EFCU,ALUMINUM | 1 | |
| GT-8082 | GENERAL 8082 Slotted Screw StarterRemover with Aluminum Handle | 1 | |
| H2057-57-M5-V25 | H SERIES 1/8 EXPANDING SEAL FILLING CONNECTORS NPT ALUMINUM | 1 | |
| H600A-005 | HEDLAND 3500PSI ALUMINUM FLOW METER FOR PETROLEUM FLUID, #10 SAE (5/8), 0.5 TO 5.0 GPM | 1 | |
| HC60000-3 | .086" SEMI-RIGID TIN-PLATED ALUMINUM CABLE (5 FT) | 1 | |
| HCS1418 | VACUUM PROBE, ALUMINUM, BAYONET TYPE | 2 | |
| HD442-01A | Crimp Die, Aluminum - MS25442-01A | 2 | |
| HD442-02A | Crimp Die, Aluminum - MS25442-02A | 2 | |
| HD442-03A | Crimp Die, Aluminum - MS25442-03A | 2 | |
| HD442-04A | Crimp Die, Aluminum - MS25442-04A | 2 | |
| HD442-1A | Crimp Die, Aluminum - MS25442-1A | 2 | |
| HD442-2A | Crimp Die, Aluminum - MS25442-2A | 2 | |
| HD442-4A | Crimp Die, Aluminum - MS25442-4A | 2 | |
| HD442-6A | Crimp Die, Aluminum - MS25442-6A | 2 | |
| HD442-8A | Crimp Die, Aluminum - MS25442-8A | 2 | |
| HL70-8 | HI-LOK ALUMINUM COLLAR, 1/4 | 1 | |
| HMT 7-122-TC | ALUMINUM 450, 5.0 MHZ | 1 | |
| HMT 7-223 -TC | ALUMINUM 700, 5 MHZ | 1 | |
| HMT 7-421-1.5-P.C.I., | ALUMINUM SHEARWAVE, PITCH/CATCH450, 5.0 MHZ | 1 | |
| HMT7-212 EC | TRANSDUCER, SHEAR WAVE, END CONNECTOR, 60 PLUS OR MINUS 2-DEGREES IN ALUMINUM, 5.0 PLUS | 1 | |
| HOCKING 29A029 | REFERENCE GAUGE FOR EDDY-CURRENT INSPECTION ON ALUMINUM ALLOY | 1 | |
| HRS-15A | ALUMINUM REFERENCE STANDARD | 1 | |
| HT60A | BAC HT-60A Tow-Bar, 13 ft L, Aluminum, Powder-Coated, Yellow, For UH-60 Blackhawk, S-70 Aircrafts | 4 | |
| Honeywell ET Standard | Honeywell Eddy Current Wheel Surface Standard. Material:2024-T6 Forged Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| IIW TYPE 2 | CALIBRATION REFERENCE STANDARD BLOCK, ALUMINUM. (GE OR EQUIVALENT) | 1 | |
| IP100XLSPHD | SESAME TECHNOLOGIES. INC. IP100-XLSPHD Installation Tool, Aluminum, 3 lb | 2 | |
| JHA-156 | ENERPAC 15 TON ALUMINUM HAND JACK | 1 | |
| JHW13500 | 8 HD PIPE WRENCH ALUMINUM | 1 | |
| JHW13502 | 10 HD PIPE WRENCH ALUMINUM | 1 | |
| JHW13504 | 12 HD PIPE WRENCH ALUMINUM | 1 | |
| JHW13506 | 14 HD PIPE WRENCH ALUMINUM | 1 | |
| JHW13508 | 18 HD PIPE WRENCH ALUMINUM | 1 | |
| JHW13510 | 24 HD PIPE WRENCH ALUMINUM | 1 | |
| JHW13512 | 36 HD PIPE WRENCH ALUMINUM | 1 | |
| JHW13514 | 48 HD PIPE WRENCH ALUMINUM | 1 | |
| K27011-9 | Aluminum Pad | 1 | |
| K27017-12 | Aluminum Pad | 1 | |
| K27017-17 | Aluminum Pad | 1 | |
| K27017-41 | Aluminum pad | 1 | |
| K27017-42 | Aluminum pad | 1 | |
| KAMH-2 | ALUMINUM CAP FOR BAR | 1 | |
| KCT845-5A | HAMMER ALUMINUM END CAP | 1 | |
| KS0324 | WRENCH,PIPE,EXTERNAL ALUMINUM HANDLE 24INLG | 1 | |
| L72 BLOCK | British Aerospace test block. Material: 2024-T3 Aluminum .128: thick. Includes Test Report and Certificate of Conformance. | 1 | |
| LAMP202 | ALUMINUM GUN | 1 | |
| LIL35740 | ALUMINUM DISCONNECT 5/16IN | 1 | |
| LIL35750 | ALUMINUM DISCONNECT 3/8IN | 1 | |
| LIL35760 | ALUMINUM DISCONNECT 1/2IN | 1 | |
| LIL35770 | ALUMINUM DISCONNECT 5/8 | 1 | |
| LIL35780 | ALUMINUM DISCONNECT 7/8IN | 1 | |
| LIL35800 | ALUMINUM DISCONNECT SET,6PC | 1 | |
| LIL39480 | 13 PC. SPRING-LOADED ALUMINUM | 1 | |
| LST36092 | ALUMINUM STRAIGHT EDGE STARRE | 1 | |
| LSW(I-20)-A | LADDER STEP ALUMINUM WEDGE WITH LEATHER CASE AND CABLIBRATION CERTIFICATION AND WOODEN BOX | 1 | |
| M12A | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) | 1 | |
| M12ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) | 1 | |
| M12N | Malco M12N 12 Aluminum Handled Andy Straight Cutting Aviation Snips | 1 | |
| M14A | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| M14ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| M346 SPAR 4 STD-1 | CUSTOM REFERENCE STANDARD, H346 SPAR 4 STD-1 HOLE INTERFACE WITH FLAPS HINGE REWORK. MATERIAL: 7050-T7451 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| M47940-10/32 | THREAD-SERT ALUMINUM RIVET NUT | 1 | |
| MA-352T | Transducer, 2.25MHZ, 35° in Aluminum, Top Mount | 1 | |
| MA-355S | Transducer, 5MHz x .25", 35° in Aluminum, Side Mount | 1 | |
| MA-355T | Transducer, 5MHz x .25", 35° in Aluminum, Top Mount | 1 | |
| MA-405T | Transducer, 5MHz x .25", 40° in Aluminum, Top Mount | 1 | |
| MA-4510S | Transducer, 10MHZ, 45° in Aluminum, Side Mount | 1 | |
| MA-4510T | Transducer, 10MHZ, 45° in Aluminum, Top Mount | 1 | |
| MA-452S | Transducer, 2.25MHZ, 45° in Aluminum, Side Mount | 1 | |
| MA-452T | Transducer, 2.25MHZ, 45° in Aluminum, Top Mount | 1 | |
| MA-455T | Transducer, 5MHz x .25", 45° in Aluminum, Top Mount | 1 | |
| MA-5110S | Shear Wave Transducer, 51 Degree in Aluminum, 10MHz, Side Mount | 1 | |
| MA-555T | Transducer, 5MHz x .25", 55° in Aluminum, Top Mount | 1 | |
| MA-6010S | Transducer, 10MHZ, 60° in Aluminum, Side Mount | 1 | |
| MA-6010T | Transducer, 10MHZ, 60° in Aluminum, Top Mount | 1 | |
| MA-602S | Transducer, 2.25MHZ, 60° in Aluminum, Side Mount | 1 | |
| MA-602T | Transducer, 2.25MHZ, 60° in Aluminum, Top Mount | 1 | |
| MA-605S | Transducer, 5MHZ, 60° in Aluminum, Side Mount | 2 | |
| MA-605T | Transducer, 5MHz x .25", 60° in Aluminum, Top Mount | 2 | |
| MA-650T | Transducer, 5MHz x .25", 60° in Aluminum, Top Mount *SAME AS MA-605T* | 1 | |
| MA-655S | Medium Case Transducer, .250" Element, 5mHz, 65 Degree, Aluminum, Side Mount | 1 | |
| MA-655T | Medium Case Transducer, .250" Element, 5mHz, 65 Degree, Aluminum, Top Mount | 1 | |
| MA-7010T | SUB MINIATURE 70° ANGLE BEAM TRANSDUCER IN ALUMINUM 10MHZ, TOP MOUNT MICRODOT CONNECTOR | 1 | |
| MA-702S | Transducer, 2.25MHZ, 70° in Aluminum, Side Mount | 1 | |
| MA-702T | Transducer, 2.25MHZ, 70° in Aluminum, Top Mount | 1 | |
| MA-705T | Transducer, 5MHz x .25", 70° in Aluminum, Top Mount | 3 | |
| MA-750T | Transducer, 5MHz x .25", 70° in Aluminum, Top Mount *SAME AS 705T* | 1 | |
| MA-7510S | Shear Wave TD, 75° in aluminum, Side Mount | 1 | |
| MA-7510T | Shear Wave TD, 75° in aluminum, Top Mount | 1 | |
| MA-805S | Medium 80 Deg in Aluminum, side Mount | 1 | |
| MA-805T | Medium 80 Deg in Aluminum, Top Mount | 1 | |
| MAB-CS | ROMPAS BLOCK, 7075-T6 or 7075-T73 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case). Note: | 1 | |
| MC12A | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| MC12ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| MC14A | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| MC14ARB | Malco® Aluminum Handle Snips (Cut length: 3") (Description: Pattern Snips) (Overall length: 12" (305 mm)) (Add to cart: Add To Cart) (Cut length: -) (Description: Replacement Blade for M12A) (Overall length: -) (Add to cart: Add To Cart) (Cut length: 3-1/ | 1 | |
| MD11-05C | Subsurface Aluminum ETLF, MD11 ALI SECTION2-1:PG1 FIG1.11 | 1 | |
| MD11-05b | MD11 SUBSURFACE ALUMINUM ETLF REFERENCE STANDARD FIG 1.10 (Sheets 1-5) Section 2-1 Pages 1-5. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-05c | MD11 SUBSURFACE ALUMINUM ETLF REFERENCE STANDARD FIG 1.11 (Sheets 1-5) Section 2-1 Pages 1-5. Includes Test Report and Certificate of Conformance. | 1 | |
| MD11-10 | McDONNELL DOUGLAS ULTRASONIC REFERENCE STANDARD (MDC-K5225 SECTION 2-1 PG.1 FIG.1.23.. 2024-T3 ALUMINUM | 1 | |
| MHS-12-1A-2 | ALUMINUM (7075-T6) MULTI-HOLE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST | 1 | |
| MHS-29-1A-0 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| MHS‐29‐1A‐0 | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| MIG1606 | ALUMINUM TORCH AND WIRE KIT | 1 | |
| MS-355S | Transducer, 5MHZ, 35° in Aluminum, Side Mount | 1 | |
| MS21913 | PLUG-ALUMINUM,FLARELESS TUBE SIZES 2 THRU 32 | 1 | |
| MS21913D6 | ALUMINUM PLUG, TUBE FITTING, THREADED | 19 | |
| MS21913W8 | PLUG - HYDRAULIC RETURN TUBE, 1/2 INCH LINE, ALUMINUM | 1 | |
| MSWQCA01105940 | Wedge 40 Deg. in Aluminum | 1 | |
| MT-MX-1837A | ALUMINUM CENTRIFUGE STAND. | 1 | |
| NAEF4 | CONNECTOR; PNEUMATIC; CONNECTION FOR HOSE FITTING IN THE AIR DISTRIBUTION BOX OF THE DOAR DATA TEST EQUIPMENT SET; ALUMINUM | CONNECTION | 1 | |
| NDE FLAW TECH-STEP WEDGE-1544 | STEP WEDGE CALIBRATION BLOCK ALUMINUM | 1 | |
| NDETECH-7233 | V2 BLOCK ALUMINUM | 1 | |
| NDT 3166- 007 | BOEING REFERENCE STANDARD 737 PART 4 57-10-08 PAGE 6 FIGURE 2. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 4 | |
| NDT 3170 | BOEING REFERENCE STANDARD 737 PART 4 57-10-06 PAGE 16 FIGURE 2. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 5 | |
| NDT 3171 | BOEING REFERENCE STANDARD 737 PART 4 57-10-06 PAGE 17 FIGURE 3. MATERIAL: AIRCRAFT QUALITY ALUMINUM. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 5 | |
| NDT-1017-0.250 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1018-0.313 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1019-0.375 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.140 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.156 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.171 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.188 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.203 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.218 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.265 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.281 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.328 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1084-0.343 | Aluminum Bolt Hole Standard | 1 | |
| NDT-1094-110-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT-1094-130-A | BOEING REFERENCE STANDARD 737 PART 4 53-30-07, 757 PART 4 53-00-02 FIG 2, 777 PART 4 53-00-02 PAGE 34 FIGURE 2. MATERIAL: ALUMINUM. PROCUDURES VARY WITH PLANE MODEL. ALL MODELS FOR THIS REFERENCE STANDARD. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMAN | 2 | |
| NDT1031 | BOEING 707 REFERENCE STANDARD 707 PART 6, 57-10-07 DETAIL 2 FIGURE 93 SHEET 7 PG.1525. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1033-10 | ALUMINUM TO ALUMINUM SKIN REFERENCE STANDARD WITH A TOTAL OF 10 BONDED SHIMS .016"-.125" THICK. 100 THICKNESS COMBINATIONS WITH SIMULATED DISBOND DEFECTS. PART 4 51-00-01 | 4 | |
| NDT1038 | BOEING REFERENCE STANDARD (ALUMINUM SKIN/CORE DEFECTS) 737/757 Part 4 51-00-05 Page 5-7 Figure 1. Material: Any 2000, 6000, or 7000 Series Aluminum, Includes C-Scan and Certificate of Conformance. | 3 | |
| NDT1039-0.016/0.016 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.016". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.016/0.020 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.020". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.016/0.025 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.025". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.016/0.100 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.100". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.020/0.020 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.016"/0.016". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.020/0.025 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.020"/0.025". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.020/0.032 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.020"/0.032". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.030/0.030 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.030"/0.030". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.032/0.032 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.032"/0.032". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.032/0.050 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.032"/0.050". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-0.040/0.050 | BOEING REFERENCE STANDARD BOEING REFERNCE STANDARD 737 PT4 53-30-01, 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM 0.040"/0.050". Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1039-T1/T2 | BOEING REFERENCE STANDARD 767 PT 4 51-00-05 FIGURE 2, PAGE 7. 2000 SERIES ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT1048 | REFERENCE STANDARD (MADE OF 7075 T6 ALUMINUM MATERIAL) | 4 | |
| NDT1048-2024T3 | Boeing Standard, PT6 51-00-00:PG11 FIG4 DETAIL IV, 2024-T3 Aluminum | 1 | |
| NDT1048-7075T6 | Boeing Standard, PT6 51-00-00:PG11 FIG4 DETAIL IV, 7075-T6 Aluminum | 1 | |
| NDT1084-1.750-7075T6 | Boeing Reference Standard,737 PT6 51-00-00: FIG16 PG10 DETAILIII, 7075T6 Aluminum | 1 | |
| NDT1085-036 | ALUMINUM REFERENCE STANDARD | 3 | |
| NDT1093-.050/.040 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2. Material: 2024-T3 Aluminum .050"/.040" thicknesses. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1093-.071/.056 | BOEING REFERENCE STANDARD 737 Part 9 51-00-03 Page 8 Figure 2. Material: 2024-T3 Aluminum .071"/.056" thicknesses. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT1094-040 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-040-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-050 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-050-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-050/010-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-070 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-070-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-090 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-090-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-110 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-110-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-130 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-130-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-155 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-155-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-185 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-185-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-215 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-215-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-245 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-245-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-275 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-275-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 2 | |
| NDT1094-300 | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1094-300-A | BOEING REFERENCE STANDARD 737 Part 4 53-30-07, 757 Part 4 53-00-02 FIG 2, 777 Part 4 53-00-02 Page 34 Figure 2. Material: Aluminum. Procudures vary with Plane Model. All Models for this Reference Standard. Includes Test Report and Certificate of Conforman | 1 | |
| NDT1099 | Boeing Standard, .023 DEEP Pocket in .063 CLAD ALUMINUM, .014 notch, with 6 ea rubber feet. 757 PT6 53-30-14 | 4 | |
| NDT1099-.014-CLAD | Boeing Standard, .023 DEEP Pocket in .063 CLAD ALUMINUM, .014 notch | 1 | |
| NDT1099-072/036/014 | Boeing Standard, .036 DEEP Pocket in .072 CLAD ALUMINUM, .014 notch, with 6 ea rubber feet | 1 | |
| NDT1099.010-BARE | Boeing Standard, .031 DEEP Pocket in .063 ALUMINUM, .010 notch | 1 | |
| NDT1099.010-CLAD | Boeing Standard, .031 DEEP Pocket in .063 CLAD ALUMINUM, .010 notch | 1 | |
| NDT126 | REFERENCE STANDARD (MADE OF 7075 T6 ALUMINUM MATERIAL) | 1 | |
| NDT17031A | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-14 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751,AIRPLANE QUALITY ALUMINUM. INCLUDES TEST REPORT AND CE | 1 | |
| NDT17031C | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 13 FIGURE 2, SHEET 3. MATERIAL: 7055-T7751,AIRPLANE QUALITY ALUMINUM. INCLUDES TEST RE | 1 | |
| NDT188A | REFERENCE STANDARD (MADE OF 7075 T6 ALUMINUM MATERIAL) | 1 | |
| NDT194C | BOEING REFERENCE STANDARD 737 Part 6 53-30-00 Page 10 Figure 6. MATERIAL: 2024-T3 OR T4 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT2015 | BOEING REFERENCE STANDARD 727 PT 4 54-30-27. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT2017 | BOEING REFERENCE STANDARD, 727 PART 4 57-10-27 FIGURE 1 PAGE 6. MATERIAL: 2024-T3 or 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3054 | BOEING REFERENCE STANDARD 737 Part 4 57-10-04 Page 12 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3065-STL | BOEING REFERENCE STANDARD 777 Part 6 53-00-07 Page 8 Figure 3. Material: Aluminum and 301 1/2 Hard. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3083 | BOEING REFERENCE STANDARD 737 Part 4 55-10-03 Page 14 Figure 3. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3094 | BOEING REFERENCE STANDARD 737 Part 4 55-10-24 Page 14 Figure 4. Material: 2000 or 7000 Series Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3144 | BOEING REFERENCE STANDARD 737 Part 4 55-10-16 Page 6 Figure 2. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3145 | BOEING REFERENCE STANDARD 737 Part 4 55-10-16 Page 7 Figure 3. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3146 | BOEING REFERENCE STANDARD 737 Part 4 55-10-16 Page 8 Figure 4. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3166-001 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3166-002 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3166-003 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3166-004 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3166-005 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3166-006 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT3166-007 | BOEING REFERENCE STANDARD 737 Part 4 57-10-08 Page 6 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 4 | |
| NDT3170 | BOEING REFERENCE STANDARD 737 Part 4 57-10-06 Page 16 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 5 | |
| NDT3171 | BOEING REFERENCE STANDARD 737 Part 4 57-10-06 Page 17 Figure 3. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 5 | |
| NDT3172 | BOEING REFERENCE STANDARD 737 Part 4 57-10-05 Page 14 Figure 2. Material: Aircraft Quality Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3195 | BOEING REFERENCE STANDARD 737 PT 4 55-10-17 PAGE 18 FIGURE 4. MATERIAL: 7075-T6 or EQUIVALENT AIRCRAFT QUALITY ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3196 | BOEING REFERENCE STANDARD 737 PT 4 55-10-17 PAGE 19 FIGURE 5. MATERIAL: 7075-T6 or EQUIVALENT AIRCRAFT QUALITY ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3197 | BOEING REFERENCE STANDARD 737 PT 4 55-10-17 PAGE 20 FIGURE 6. MATERIAL: 7075-T6 or EQUIVALENT AIRCRAFT QUALITY ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT3226 | BOEING REFERENCE STANDARD 53-11-39 PART 6. MATERIAL: 2024-T3 ALUMINUM. 2. Includes Test Report and Certificate of Conformance.BACR15FT6D RIVETS BUCKED BETWEEN .250"Ø and .280"Ø. | 2 | |
| NDT3229 | BOEING REFERENCE STANDARD 737 PT6 53-30-50 FIGURE 2 PAGE 21. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3231 | BOEING REFERENCE STANDARD 737 Part 4 53-10-10 Page 10 Figure. Material: 2024 or 7075 series Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3276 | BOEING REFERENCE STANDARD 737 PART 4 53-20-02 FIGURE 2 PAGE 9. MATERIAL: 2024-T3 ALUMINUM WITH RUBBER FEET ON BOTTOM FOR SUPPORT. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3276A | BOEING REFERENCE STANDARD 737 PART 4 53-20-02 FIGURE 3 PAGE 10. MATERIAL: 2024-T3 ALUMINUM WITH RUBBER FEET ON BOTTOM FOR SUPPORT. Includes Test Report and Certificate of Conformance. . | 2 | |
| NDT3278-A | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3278-B | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3278-C | BOEING REFERENCE STANDARD 737 PART 6 53-30-50 FIGURE 3 PAGE 30. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3305A | BOEING REFERENCE STANDARD PART 4 53-10-64 PG.18, FIG. 5. MATERIAL: 2024-T42 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT3305B | BOEING REFERENCE STANDARD PART 4 53-10-64 PG.18, FIG. 5. MATERIAL: 2024-T42 CLAD ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT3317 | BOEING 737 STANDARD NTM , TAPERED ALUMINUM AND TITANIUM WITH .25 DIAMETER HOLES | 1 | |
| NDT3318 | BOEING 737 STANDARD NTM 53-11-61, TAPERED ALUMINUM AND TITANIUM WITH .375 DIAMETER HOLES | 1 | |
| NDT4151 | BOEING 747 REFERENCE STANDARD PART 4 57-10-17 FIGURE 3 PAGE 10. 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4152 | BOEING 747 REFERENCE STANDARD PART 4 53-10-07 PAGE 6 FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4187 | BOEING 747 REFERENCE STANDARD PART 4 57-10-18 FIGURE 2 PAGE 8. 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4221 | BOEING 747 REFERENCE STANDARD PART 6 53-30-12 PAGE 5 FIGURE 2. MATERIAL: 2024-T3 Bare or Clad Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4225 | BOEING 747 REFERENCE STANDARD PART 6 53-10-47 PAGE 7 FIGURE 2. MATERIAL: 7075-T6 or 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4231 | BOEING 747 REFERENCE STANDARD PART 4 57-10-18 FIGURE 2 PAGE 8. 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4232 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 2, Page 6. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4233 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 3, Page 7. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4234 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 4, Page 8. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4235 | Boeing Reference Standard 747 55-10-03 PART 4 Figure 5, Page 9. Material: 2024-T3 or 7075-T6 Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4236 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4237 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4238 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4239 | Boeing Reference Standard 747 53-30-16 PART 6 Figure 1, Page 5&6. Material: 2024-T3 Clad Aluminum. Includes test report traceable to NIST Standards and Certificate of Conformance(COC). | 1 | |
| NDT4267 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 10 FIGURE 2. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4268 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 11 FIGURE 3. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4270 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 13 FIGURE 5. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4271 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 14 FIGURE 6. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4272 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 15 FIGURE 7. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT4273 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 16 FIGURE 8. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT4274 | BOEING REFERENCE STANDARD 747 PT 4 57-40-08 PAGE 17 FIGURE 9. MATERIAL: 7075-T7 or 2024-T3 ALUMINUM,. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT528 | BOEING REFERENCE STANDARD 757 Part 4 55-10-04 Page 10 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT542 | BOEING REFERENCE STANDARD 757 Part 4 55-10-07 Page 11 Figure 3. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT562 | BOEING REFERENCE STANDARD 757 Part 4 57-25-01 Page 11 Figure 2. Material: Aircraft Qualtiy Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT564A | BOEING REFERENCE STANDARD 757 Part 4 57-50-01 Page 4 Figure 2. Material: Aircraft Grade Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT564B | BOEING REFERENCE STANDARD 757 Part 4 57-50-01 Page 4 Figure 2. Material: Aircraft Grade Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT582 | BOEING REFERENCE STANDARD 757 PT 6 57-50-08 Page 7 Figure 2. Material: 2024-T351 Aluminum Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000A | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000B | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000C | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000D | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6000E | BOEING REFERENCE STANDARD 767 Part 4 57-50-02 Page 9 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6031-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-18 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6031-2 | BOEING REFERENCE STANDARD 767 Part 4 57-50-18 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6031-3 | BOEING REFERENCE STANDARD 767 Part 4 57-50-18 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6031-4 | BOEING REFERENCE STANDARD 767 Part 4 57-50-18 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6032-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6032-2 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6032-3 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6032-4 | BOEING REFERENCE STANDARD 767 Part 4 57-50-19 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6033-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-12 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6033-2 | BOEING REFERENCE STANDARD 767 Part 4 57-50-12 Page 5 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6034 | BOEING REFERENCE STANDARD 767 Part 4 57-50-13 Page 7 Figure 2. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6035-1 | BOEING REFERENCE STANDARD 767 Part 4 57-50-13 Page 8 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6035-2 | BOEING REFERENCE STANDARD 767 Part 4 57-50-13 Page 8 Figure 3. Material: 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6045 | BOEING REFERENCE STANDARD 767 PART 4 54-50-08. MATERIAL: 7075-T6 or 7075-T7 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6058 | BOEING 767 REFERENCE STANDARD PART 4 53-50-01 FIGURE 2 PAGE 10. MATERIAL: 7075 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6060 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6061 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT6062 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6064 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6065 | BOEING REFERENCE STANDARD 767 PART 4 54-50-09 PAGE 12 FIGURE 2. MATERIAL: 2024-T3 OR 7075 SERIES ALUMINUM.. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6075 | BOEING REFERENCE STANDARD 767 PART 6 53-10-22 FIGURE 2 PAGE 5. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6076 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6077 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6078 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6079 | BOEING REFERENCE STANDARD 767 ..P6 57-20-10 MATERIAL: 7075-T6 OR 2024-T3 ALUMINUM. EXTERNAL LFEC INSPECTION ON STRINGERS6,10,15 AT THE LOWER WING SKIN AT RIBS3, 5, 18 AND 31. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6080 | BOEING REFERENCE STANDARD 767 PART 6 57-20-03 FIGURE 3 PAGE 9. MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6096 | BOEING REFERENCE STANDARD 767 PART 4 53-60-02 FIGURE 2 PAGE 6. MATERIAL: 2024-T3 ALUMINUM WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6100 | BOEING REFERENCE STANDARD 767 PART 4 57-10-03 PAGE 6 FIGURE 2 MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6109 | BOEING REFERENCE STANDARD BOEING REFERENCE STANDARD 767 PART 6 57-20-01. Includes Test Report and Certificate of Conformance. MATERIAL: 7075-T6, 2024-T3 CLAD OR BARE ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110A | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110B | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110C | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110D | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6110E | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 FIGURE 4 SHEETS 1&2 PAGES 9&10. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT6111A | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 Figure 5, Sheets 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT6111B | BOEING 767 REFERENCE STANDARD PART 6 57-20-08 Figure 5, Sheets 1-2. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT629 | BOEING COMPOSITE REFERENCE STANDARD 767 PT 4 57-40-01. AULUMINUM to ALUMINUM HONEYCOMB CORE. Includes C-Scan Report and Certificate of Conformance. 2 year Unconditional Warranty. | 2 | |
| NDT630 | BOEING REFERENCE STANDARD 767 Part 4 55-10-02 Page 5 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT651 | BOEING REFERENCE STANDARD 767, 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT7031A | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-14 PAGE 6 FIGURE 2. MATERIAL: 7055-T7751, OR AIRPLANE QUALITY ALUMINUM. INCLUDES TEST REPORT AND CE | 2 | |
| NDT7031C | BOEING REFERENCE STANDARD 777-200/300 PART 4 57-20-15 PAGE 13 FIGURE 2, SHEET 3. MATERIAL: 7055-T7751, OR AIRPLANE QUALITY ALUMINUM. INCLUDES TEST RE | 1 | |
| NDT729 | 60° IN ALUMINUM LUCITE (PLEXIGLASS) WEDGE, 3/8-32 THREAD USED WITH A .25"Ø DIAMETER TRANSDUCER WITH A 3/8-32 THREAD. Includes Certificate of Conformance.(1.0"L x .45"W x .50"H). MSWQCW 203-70. Includes Certificate of Conformance. | 1 | |
| NDT736 | BOEING 777 REFERENCE STANDARD PART 4 53-60-02 FIGURE 2 PAGE 6. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT754 | BOEING 777 REFERENCE STANDARD PART 6 53-80-03 FIGURE 3 PAGE 5. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| NDT797 | BOEING REFERENCE STANDARD 777-200/300 PART 4 53-40-06 PG.11 FIGURE 2. MATERIAL: 7075-T7 ALUMINUM WITH GRAIN DIRECTION. Includes Test Report and Certificate of Conformance. | 3 | |
| NDT811 | BOEING CALIBRATION STANDARD FIGURE 3 DETAIL II. MATERIAL: 2024-T351 ALUMINUM or 7075-T651 ALUMINUM. | 1 | |
| NDT815 | BOEING REFERENCE STANDARD 787 Part 4 57-10-01 Page 10 Figure 2. Material: 2024 or 7075 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NDT817 | BOEING REFERENCE STANDARD 787 Part 4 51-00-23 Page 5 Figure 2. Material: Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| NRK-3A/2024-T3 | CUSTOM NAVY BLOCK 2024-T3 ALUMINUM. CONTAINS 20 FASTENER HOLES (.156-.750) WITH A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Confromance. | 1 | |
| NRK-3AL | CUSTOM NAVY BLOCK 7075-T6 ALUMINUM. CONTAINS 20 FASTENER HOLES (.156-.750) CONTAINING A TOTAL OF 71 EDM NOTCHES. Includes Test Report and Certificate of Confromance. | 2 | |
| NRK-3AST | CUSTOM NAVY BLOCK SET, 3 Blocks Total. Materials: 7075-T6 Aluminum, 4340 Cres Steel and 6AL-4V Titanium. Each Standard Includes 20 Fastener Holes (.156-.750) Containing a total of 71 EDM Notches. All Standards Manufactured in Accordance with U.S.A.F. ... | 1 | |
| NRK-A | NSN 5280-01-352-1336 Aluminum..*DO NOT USE THIS PART #, OURS IS RSN-7075T6 | 1 | |
| OP12A31QNFPA | 1/2" Aluminum Modified D Quik-Lok Blue, NFPA | 1 | |
| OP12A33QCENFPA | 1/2" Aluminum Modified D Quik-Lok w/ Captive Eye Red, NFPA | 1 | |
| OP12A33QNFPA | 1/2" Aluminum Modified D Quik-Lok Red, NFPA | 1 | |
| OP12A35LNFPA | 1/2" Aluminum Modified D Screw-Lok Black, NFPA | 1 | |
| OP12A36LNFPA | 1/2" Aluminum Modified D Screw-Lok Bright, NFPA | 1 | |
| OP12A36Q3NFPA | 1/2" Aluminum Modified D 3-Stage Quik-Lok Bright, NFPA | 1 | |
| OP12A36QCENFPA | 1/2" Aluminum Modified D Quik-Lok w/ Captive Eye Bright, NFPA | 1 | |
| OP12A36QNFPA | 1/2" Aluminum Modified D Quik-Lok Bright, NFPA | 1 | |
| OP12A55L | 1/2" Aluminum Large D Screw-Lok Black | 1 | |
| OP12A56L | 1/2" Aluminum Large D Screw-Lok Bright | 1 | |
| OPGF36LNFPA | G-FIRST Aluminum Keylock Screw-Lok Red/Bright | 1 | |
| OPGF36Q3CENFPA | G-FIRST Aluminum Keylock 3-Stage Quik-Lok Red Captive-Eye NFPA & ANSI | 1 | |
| OPGF36Q3NFPA | G-FIRST Aluminum Keylock 3-Stage Quik-Lok Red NFPA & ANSI | 1 | |
| OPGF36QCENFPA | G-FIRST Aluminum Keylock Quik-Lok Red/Bright Captive Eye | 1 | |
| OPGF36QNFPA | G-FIRSTAluminum Keylock Quik-Lok Red/Bright | 1 | |
| OPGF55LNFPA | G-FIRST Aluminum Keylock Screw-Lok Black | 1 | |
| OPGF55Q3CENFPA | G-FIRST Aluminum Keylock 3-Stage Quik-Lok Black Captive-Eye NFPA & ANSI | 1 | |
| OPGF55Q3NFPA | G-FIRST Aluminum Keylock 3-Stage Quik-Lok Black NFPA & ANSI | 1 | |
| OPGF55QCENFPA | G-FIRST Aluminum Keylok Quik-Lock Captive Eye Black | 1 | |
| OPGF55QNFPA | G-FIRST Aluminum Keylock Quik-Lok Black | 1 | |
| OPGF6LNFPA | G-FIRST Aluminum Keylock Screw-Lok Bright | 1 | |
| OPGF6Q3NFPA | G-FIRST Aluminum Keylock 3-Stage Quik-Lok Bright NFPA & ANSI | 1 | |
| OPGF6QCENFPA | G-FIRST Aluminum Keylock Quik-Lok Bright Captive Eye | 1 | |
| OPGF6QNFPA | G-FIRST Aluminum Keylock Quik-Lok Bright | 1 | |
| PAB-0503-70- AL-SM | ALUMINUM 700, 5 MHZ | 1 | |
| PAB-1004-45AL | ALUMINUM 450, 10.0 MHZ | 1 | |
| PANAMETRICS-A5067-SM | MICRO-MINIATURE TRANSDUCER , ANGLE 45 DEGREE ALUMINUM | 1 | |
| PDL 1034J/1040J | CALIBRATION STANDARD 20-40-00 FIG 18 7075-T6 ALUMINUM | 2 | |
| PDL 1037AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 30 FIG 20, 7075-T6 ALUMINUM | 1 | |
| PDL 1037BJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 31 FIG 21, 7075-TG ALUMINUM | 1 | |
| PDL 1040 | TRANSDUCER GUIDE MATERIAL 7075-T6 ALUMINUM | 1 | |
| PDL 1215J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 23 PAGE 33, 7075-T6 ALUMINUM | 2 | |
| PDL 1217AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 24 PAGES 34, 7075-T6 ALUMINUM | 1 | |
| PDL 389J | LOCKHEED C-130 CALIBRATION STANDARD 7075-T6 ALUMINUM FIGURE 1 | 2 | |
| PDL 419J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 2 PAGE 4, 2024-T3 ALUMINUM | 1 | |
| PDL 447J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 4, 7075-T6 ALUMINUM | 2 | |
| PDL 449J | LOCKHEED C-130 CALIBRATION STANDARD FIGURE 5, 7075-T6 ALUMINUM | 1 | |
| PDL 457A | CALIBRATION STANDARD, ALUMINUM, LM AERO | 1 | |
| PDL 457AJ | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 6 PAGES 8&9 SHEET 1&2, 7075-T6 ALUMINUM | 2 | |
| PDL 459J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 7 PAGE 10, 7075-T6 ALUMINUM | 1 | |
| PDL 917 | LOCKHEED C 130 CALIBRATION STANDARD FIGURE 2 PAGE 14. 7075-T6 ALUMINUM OR EQUIVALENT. | 2 | |
| PDL 919 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 2 | |
| PDL 919J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 11 SHEET 1&2, 7075-T6 ALUMINUM, FASTENERS (HL64PB-10-9, HLT114-6-8, HLT18PB-12, HL70) | 1 | |
| PDL 941J | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 FIGURE 13 PAGE 19, 7075-T6 ALUMINUM | 1 | |
| PDL 943J | CALIBRATION STANDARD FIGURE 14 PG.20 FASTENER (HL54-6-6, HL54-6-5, COLLAR (HL70-6) SMP-515-C NDI; 20-40-00, 7075-T6 ALUMINUM | 2 | |
| PDL 944-2J | CALIBRATION STANDARD FIGURE 15 FASTENER (HL40-6-5 + HL70-6, NAS6208-11 + KFN5428), 7075-T6 ALUMINUM | 2 | |
| PDL 944-J | CALIBRATION STANDARD FIGURE 15 FASTENER (HL40-6-5 + HL70-6, NAS6208-11 + KFN5428), 7075-T6 ALUMINUM | 1 | |
| PDL 958 | LOCKHEED C-130 CALIBRATION STANDARD 20-40-00 PAGE 23 FIGURE 16 2024-T3 ALUMINUM | 1 | |
| PDL 980 | C-130 Lower Engine Mount Longeron-Fwd End Calibration Standard. 7075-T6 Aluminum... | 1 | |
| PDL-457A | CALIBRATING STANDARDS, BOLT HOLE, ALUMINUM 7075-T6 | 1 | |
| PDL1040 | TRANSDUCER GUIDE MATERIAL 7075-T6 ALUMINUM | 1 | |
| PDL389 | CALIBRATION STANDARD ALUMINUM | 1 | |
| PDL419 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL422 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL447 | CALIBRATION STANDARD, "T" BEAM, ALUMINUM | 1 | |
| PDL457A | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL459 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL525 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL621 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PDL843 | CALIBRATION STANDARD, ALUMINUM | 1 | |
| PME1260 | YARDSTICK TEMP ALUMINUM 36IN | 1 | |
| PT-ABT | ALUMINUM SENSITIVITY TEST BLOCK | 1 | |
| QCX45 | 45° IN ALUMINUM LUCITE (PLEXIGLASS) WEDGE FOR .25" DIAMETER TRANSDUCER. 3/8-32 THREAD | 1 | |
| QO-QTS-TI-03-001 | Air Force reference standard Detail#1. Material 7075-T6 Aluminum. EDM Notch size: .050" x .050" x .005" Max Width, 10 Flaws total. Includes Test Report and Certificate of Conformance. | 1 | |
| RACL10010 | ALUMINUM LOCK NUT HYDRAULIC CYLINDER | 1 | |
| RAPRNG | Aluminum Rappel Ring | 1 | |
| RBT400228-M | Support Mast Nut Torque (Aluminum) | 2 | |
| RBT400228M | SUPPORT MAST NUT TORQUE (ALUMINUM) | 2 | |
| RBW109-3101-58-2 | Hammer, Aluminum, Blade Corrosion and Voids Detection | 3 | |
| RC-5S1018 | ALUMINUM STEP CALIBRATION BLOCK | 1 | |
| RC12-40M20-2024T3-194 | Countersink Standard, 12 Holes of 5/32" to 5/16" x 1/64" plus 3/8", .040" in CS and .020" midwall, 2024T3 Aluminum.... | 1 | |
| RC12-40M20-7075T6-194 | Countersink Standard, 12 Holes of 5/32" to 5/16" x 1/64" plus 3/8", .040" in CS and .020" midwall, 7075-T6 Aluminum.... | 1 | |
| RCA0AC2SPF | Sesame Technologies Angle of Attack Cover, Anodized Aluminum | 2 | |
| RCA0AC2SPSD | SESAME TECHNOLOGIES. INC. RCAOAC2SPSD Angle of Attack Cover, Aluminum, Red, Anodized | 2 | |
| RCM12-40T40-7075T7 | Countersink Standard, 12 Holes of .125 - .75", .040" in CS and .040" thru, 7075-T7 Countersink Standard, 12 Holes of .125 - .75", .040" in CS and .040" thru, 7475-T6 Aluminum, 3 surface notches, .008", .020", .040"...... | 1 | |
| RH-4-37 | 4-37 Reference Standard, 7075-T6 Aluminum, per drawing | 1 | |
| RH100-T20-2024T3 | 10 Hole Standard, 3/16" to 1.0", .020" thru notch, 2024T3 Aluminum | 1 | |
| RH110-C20C30-7075T6 | 11 Holes, Diameters: 1/8,5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4 & 7/8", .030" Corner and .020" Corner (opposite side), 7075-T6 Aluminum, .250" Thick, Per 767, 51-00-16 & -17 | 1 | |
| RH12-T40-7075T6 | CALIBRATION REFERENCE STANDARD (CRS), ALUMINUM ALLOY, CONDUCTIVITY VALUE OF 35% TO 45% IACS THAT CONTAINS VARIOUS HOLE SIZES WITH 0.040 IN. (1.02 MM) DEEP ELECTRICAL DISCHARGE MACHINED (EDM) NOTCHES (TECHNA NDT OR EQUIVALENT) | 1 | |
| RH120-C30-2024T3 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch, 2024-T3 Aluminum | 1 | |
| RH120-C30-7075T6 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch, 7075T6 Aluminum | 1 | |
| RH120-C30M20-2024T3 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch, 2024-T3 Aluminum | 1 | |
| RH120-C30M20-7075T76 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 midwall notch, 7075-T76 Aluminum | 1 | |
| RH120-C30T20-7075T6 | 12 Hole Reference Standard, 3/16" to 3/4", with .030" corner notch and .020 thru notch, 7075T6 Aluminum | 1 | |
| RH121-C30-2024T3 | 12 Hole Reference Standard, 1/8" to 3/4", with .030" corner notch, 2024-T3 Aluminum | 1 | |
| RH121-C30-7075T6 | 12 Hole Reference Standard, 1/8" to 3/4", with .030" corner notch, 7075-T6 Aluminum | 1 | |
| RH121-C30C20-7075T6 | 12 Hole Reference Standard, 1/8" to 3/4", with .030" corner notch & .020" corner notch, 7075-T6 Aluminum | 1 | |
| RH121-M20-7075T6 | 12 Hole Reference Standard, 1/8" to 3/4", with .020" Mid Wall notch, 7075-T6 Aluminum | 1 | |
| RH122-T20-2024T3 | 12 Hole Reference Standard, 5/32" to 13/16", with .020" thru notch, 2024-T3 Aluminum | 1 | |
| RH122-T40-7075T6 | 12 Hole Reference Standard, 5/32" to 13/16", with .040" thru notch, 7075-T6 Aluminum | 1 | |
| RH123-C30-2024T3 | 12 hole calibration standard, .030 Corner notches, 3/16" (.187) to 25/64" (.390), 2024T3 Aluminum | 1 | |
| RH18-T20-2024T3 | 18 hole standard 5/16, 11/32, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 25/32, 13/16, 7/8, 15/16 with .020 thru notches, 2024T3 Aluminum | 1 | |
| RH18.75-T20-7075T6 | 18 hole standard 5/16, 11/32, 13/32, 7/16, 15/32, 1/2, 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 25/32, 13/16, 7/8, 15/16 with .020 +/- .002 thru notches .004 +/- .002 wide notches, 7075-T6 Aluminum .75" thick plate | 1 | |
| RH40-T20C30-2024T3 | 4 Hole Standard, 1.0", 1.125", 1.187" and 1.5" holes with .030" corner notch and .020 thru notch, 2024T3 aluminum | 1 | |
| RH50-C30C20-7075T6 | 5 Hole Standard, 1", 1.125", 1.25", 1.375", 1.50" .030 Corner and .020 corner, 7075T6 Aluminum, Per 747, 51-00-00, FiG16, PG10 | 1 | |
| RH53-T20-7075T6 | 5 Hole Standard, .098", .128", .161", .193", .228", .020 thru notch, 7075T6 aluminum | 1 | |
| RH55-C3M2/3-7075T6 | 5 Hole Standard, .930, 1.00, 1.250, 1.500, 2.375, .030 Corner and .020 x .030 Midwall, 7075T6 Aluminum | 1 | |
| RH70-T20-2024T3 | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, Aluminum | 1 | |
| RH70-T20-7075T6 | Hole Reference Standard, 7 holes, 5/32” thru 1/2” w/ .020” thru-wall notches, Aluminum | 1 | |
| RH71-C30C20-7075T6 | 5 Hole Standard, .156", .187", .250", .312", .375", .437, .500"" .030 Corner and .020 corner,.005" width, .030 lendth, 7075T6 Aluminum | 1 | |
| RH73-C20C30-7075T6 | Multi Hole Reference Standard,.188, .250, .313, .375, .438, .500, .875", .030" Corner and .020" Corner (opposite side), 7075-T6 Aluminum | 1 | |
| RH83-T20-7075T6 | 8 Hole Standard, .098", .128", .161", .193", .228",250", 312", 375" .020 thru notch, 7075T6 aluminum | 1 | |
| RM100-C30-2024T3 | 10 Hole Standard, 3/16" to 1.0", .030" corner notch, 3 surface notch, 2024T3 Aluminum | 1 | |
| RM100-C30T20-2024T3 | 10 Hole Standard, 3/16" to 1.0", .030" corner notch.020" through notch, 3 surface notch, 2024T3 Aluminum | 1 | |
| RM120-C30-7075T6-1 | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 7075-T6 ALUMINUM, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| RM120-C30C20-2024T3 | 12 hole calibration standard, .030" corner notches, 3/16" to 3/4", 2024T3 Aluminum“2 corner notches 180 deg apart. 0.030’” upper surface and 0.020” on lower surface | 1 | |
| RM123-C30-2024T3 | 12 hole calibration standard, .030 Corner notches, 3/16" (.187) to 25/64" (.390), 008", .020", .040" surface notches, 2024T3 Aluminum | 1 | |
| RM140-C50-7075T6 | Multi Purpose Standard (7075-T6 Aluminum), 1/8" to 3/8" x 1/32" & 7/16", 1/2", 9/16", 5/8", 3/4" w/.050" Corner + 3 Surface Notches | 1 | |
| RM150 | ALUMINUM REFERENCE STANDARD | 1 | |
| RM150-C30-2024T3 | 1/8 to 1.0" in 1/16" Increments w/ .030" corner notch plus 0.010, .020 & .040" surface notches, 2024-T3 Aluminum | 1 | |
| RM150-T20-2024T3 | 15 Hole Standard, .020" thru notch, 2024T3 Aluminum | 1 | |
| RM290-C30T20-2024T3 | Multi Purpose Standard, Aluminum, 1/8" to 1" x 1/32" w/ .020 Thru and .030 Corner Notch + 3 Surface Notches | 1 | |
| RM80-C30T20-2024T3 | 8 Hole Standard, .125" thru .500", 2024-T3 Aluminum, .030" Corner, .020 thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM80-C30T20-7075T6 | 8 Hole Standard, .125" thru .500", 7075-T6 Aluminum, .030" Corner, .020 thru notch w/ .010", .020" and .040" surface notches | 1 | |
| RM87-C30M20-2024T3 | Hole Standard, 1/8" to 9/16 x 1/16" Inc. with .030" corner notch and 0824 surface notches,.020" Midwall Notches, Aluminum | 1 | |
| RS016-5 | REFLECTION SPOT PROBE, Ø.60"OD, Ø.67" CASE, 50HZ-3KHZ, TRIAX FISCHER CONNECTOR, ALUMINUM HOUSING | 1 | |
| RS0512M-2024T3 | Surface Standard (Metric), .5mm, 1mm, 2mm, 2024-T3 aluminum | 1 | |
| RS0512M-2024T3-1 | Surface Standard (metric), 2024-T3 aluminum .5mm, 1mm and 2mm notches..80mm long x 35mm wide x 7mm thick, Width .1 +/- .05 | 1 | |
| RS0512M-7075T6 | Surface Standard (Metric), .5mm, 1mm, 2mm, 7075-T6 aluminum | 1 | |
| RS0824-.060-2024T3 | Surface Reference Standard, .008", .020", .040" x .060" Long, 2024T3 Aluminum | 1 | |
| RS0824-.060-7075T6 | Surface Reference Standard, .008", .020", .040" x .060" Long, 7075-T Aluminum | 1 | |
| RS0824-6061T4 | Surface Standard, .008"-.020"-.040" deep notches, 6061-T4 Aluminum | 1 | |
| RS0824-6061T6 | Surface Standard, .008"-.020"-.040" deep notches, 6061-T6 Aluminum | 1 | |
| RS0824-BA13 | Surface Standard, .008, .020, .040 notches, Aluminum Bronze Alloy | 1 | |
| RS0825-2024T3 | Surface Standard, .008"-.020"-.050" deep notches, 2024-T3 Aluminum | 1 | |
| RS123-2024T3 | Surface Standard,2024-T3 Aluminum, .010, .020, .030 deep notches | 1 | |
| RS123X60-7075T6 | Surface Standard,7075-T6 Aluminum, .010, .020, .030 deep notches 4"x1"x.375" thick, .060" long, .006" max wide notch | 1 | |
| RS204-2/TF | REFLECTION SPOT PROBE, Ø.40" OD, 800HZ-20KHZ, TRIAX CONNECTOR, ALUMINUM HOUSING | 1 | |
| RS34-2024T6-1 | Surface Standard, 2024-T6 Aluminum, .040" deep x 1" long x .006 +/- .004 wide, .030" deep x .120" long x .006 +/- .004 wide notches. 1" x 3" x .25" | 1 | |
| RS4-2024T3 | Surface Standard, 2024-T3 Aluminum, .040 deep notch | 1 | |
| RS456-567 | ALUMINUM HANDLE | 1 | |
| RSAF-4340 | Air Force Standard, 4340 aluminum | 1 | |
| RSAF-7075T6 | Air Force Standard, 7075T6 aluminum | 1 | |
| RSN-2024T3 | Navy Reference Standard, 2024T3 Aluminum | 1 | |
| RSN-2024T3-1 | Navy Reference Standard, 2024T3 Aluminum *.040" +004/-000 countersink notches, similar to Boeing 194 standard* | 1 | |
| RSN-7075T6 | Navy Reference Standard, 7075T6 Aluminum | 1 | |
| RSV1-AL | V1 UT Reference Block in Aluminum with wooden case | 1 | |
| RT11-2024T3-.020/.120 | 11 Step Wedge, .020" to .120 x .010", 1" x 1" pads, 2024T3 Aluminum | 1 | |
| RT5-2024T3-.010/.050-.010 | 5 Step Wedge, .010" to .050" x .010", 5" x 1" pads, 2024T3 Aluminum | 1 | |
| RT5-2024T3-.010/.160 | 5 Step Wedge, .010", .020", .040", .080" .160" x 1" pads, 5" Length, 2024T3 Aluminum | 1 | |
| RT5-2024T3-.020/.250 | 5 Step Wedge, .020", .050", .080", .125" .250" x 1" pads, 5" Length, 2024T3 Aluminum | 1 | |
| RT5-2024T3-.025/.250 | 5 Step Wedge, .025", .050", .080", .125" .250" x 1" pads, 5" Length, 2024T3 Aluminum | 1 | |
| RT5-2024T3-.100/.200 | 5 Step Wedge, .100", .125", .150", .175" .200" x 1" pads, 5" Length, 2024T3 Aluminum | 1 | |
| RT5-2024T3-.100/.500-.100 | 5 Step Wedge, .100" to .500" x .100" increments, 5" x 1", 2024-T3 Aluminum | 1 | |
| RT5-2024T3-1 | 5 Step Wedge, 5mm to 25mm x 5mm, 2024T3 Aluminum | 1 | |
| RT5-2024T3-2 | 5 Step Wedge, 1mm, 1.5mm, 2mm, 4mm, 6mm Steps, 2024T3 Aluminum, w/Cert | 1 | |
| RT5-2024T3-4 | 5 Step Wedge, .5mm to 2.5mm x .5mm steps x 25.4mm width, 2024T3 Aluminum | 1 | |
| RT5-2024T3-5 | 5 Step Wedge, .040,.080,.160,.320 width, 2024T3 Aluminum | 1 | |
| RT5-2024T4-.100/.500-.100 | 5 Step Wedge, .100" to .500" x .100" increments, 5" x 1", 2024-T4 Aluminum | 1 | |
| RT5-2024T6-.100/.500-.100 | 5 Step Wedge, .100" to .500" x .100" increments, 5" x 1", 2024-T6 Aluminum | 1 | |
| RT5-2024T8-.100/.500-.100 | 5 Step Wedge, .100" to .500" x .100" increments, 5" x 1", 2024-T8 Aluminum | 1 | |
| RT5-7075T6-.010/.050-.010 | 5 Step Wedge, .010" to .050" x .010", 5" x 1" pads, 7075T6 Aluminum | 1 | |
| RT5-7075T6-.025/.063 | 5 Step Wedge, .025",.032", .040", .050", .063", 7075T6 Aluminum | 1 | |
| RT5-7075T6-.070/.125 | 5 Step Wedge .070", .080", .090", .100", .125", 7075T6 Aluminum | 1 | |
| RT5-7075T6-.100/.500-.100 | 5 Step Wedge, .100" to .500" x .100" increments, 5" x 1", 7075-T6 Aluminum | 1 | |
| RT5-7075T6-.600/1.0 | 5 Step Wedge, .600", 700", 800", .900", 1.0" , 5" x 1", 7075-T6 Aluminum | 1 | |
| RT5-7075T7-.100/.500-.100 | 5 Step Wedge, .100" to .500" x .100" increments, 5" x 1", 7075-T7 Aluminum | 1 | |
| RT5.75-7075T6-.100/.500 | 5 Step Wedge, .100", .200", 300", 400", 500" increments, 5" x .75", 7075-T6 Aluminum | 1 | |
| RT5.75-7075T6-.25/1.25 | 5 Step Wedge, .25", .5", .75", 1", 1.25" increments, 5" x .75", 7075-T6 Aluminum | 1 | |
| RT6-2024T3-.040/.400 | 6 Step Wedge, .040, .080, .160, .250, .300, .400 ±.001 , 6" x 1" pads, 2024T3 Aluminum | 1 | |
| RT6-2024T3-.160/.400 | 6 Step Wedge, .160, .200, .250, .300, .350, .400 ± .001 , 6" x 1" pads, 2024T3 Aluminum | 1 | |
| RT6-2024T3-.250/.500 | 6 Step Wedge, .250", .300", .350", .400" .450" .500 x 1" pads, 6" Length, 2024T3 Aluminum | 1 | |
| RT6-2024T3-1/10MM | 6 Step Wedge, 1MM, 2MM, 4MM, 6MM, 8MM, 10MM ±.001 , 6" x 1" pads, 2024T3 Aluminum | 1 | |
| RT6-2024T3-10/60MM-2 | 6 Step Wedge, 10mm, 20mm, 30mm, 40mm, 50mm, 60mm ±.001 , 40mm x 30mm pads, 5mm flat bottom holes on each step, 2024T3 Aluminum | 1 | |
| RT6-20MM-2024T3-.5/3MM | 6 Step Wedge, .50mm, 1.00mm, 1.50mm, 2.00mm, 2.50mm, 3.00mm, 20mm x 20mm, 2024T3 Aluminum | 1 | |
| RT6-20MM-6061T6-.5/3MM | 6 Step Wedge, .50mm, 1.00mm, 1.50mm, 2.00mm, 2.50mm, 3.00mm, 20mm x 20mm, 6061-T6 Aluminum | 1 | |
| RT6-20MM-7050T7-.5/3MM | 6 Step Wedge, .50mm, 1.00mm, 1.50mm, 2.00mm, 2.50mm, 3.00mm, 20mm x 20mm, 7050-T7 Aluminum | 1 | |
| RT6-20MM-7075T6-.5/3MM | 6 Step Wedge, .50mm, 1.00mm, 1.50mm, 2.00mm, 2.50mm, 3.00mm, 20mm x 20mm, 7075-T6 Aluminum | 1 | |
| RT6-7075T6-1/10MM | 6 Step Wedge, 1MM, 2MM, 4MM, 6MM, 8MM, 10MM ±.001 , 6" x 1" pads, 7075T6 Aluminum | 1 | |
| RT6-7175T7-10/60MM-2 | 6 Step Wedge, 10mm, 20mm, 30mm, 40mm, 50mm, 60mm ±.001 , 40mm x 30mm pads, 5mm flat bottom holes on each step, 7175-T7 Aluminum | 1 | |
| RT6.5-2024T3-.500-1.00-.100 | 6 Step Wedge, .500 to 1.00 x .100, 3" x .5" pads, 2024T3 Aluminum | 1 | |
| RUK-SHB-071098 | Aluminum Standard, 31.75mm hole | 1 | |
| S0143 | Fokker 50/60 Reference Standard PART 6 53-30-03 PAGE 9. Material: 2024-T3 Alclad Aluminum. | 1 | |
| S14-2 | 1/4" ALUMINUM DUST PLUG, S14-2 | 2 | |
| S2175008001 | ALUMINUM SLEEVE | 1 | |
| S46-G1A/G2A | BOEING REFERENCE STANDARD FIGURE 2. MATERIAL: 2024-T3 ALUMINUM. FASTENERS: BACR15CE6D 2 PLACES. Includes Certification Report. | 1 | |
| SA-4510S | Transducer, 10MHZ, 45° in Aluminum, Side Mount | 1 | |
| SA-4510T | Transducer, 10MHZ, 45° in Aluminum, Top Mount | 1 | |
| SA-452S | Transducer, 2.25MHZ, 45° in Aluminum, Side Mount | 1 | |
| SA-452S-SS | Transducer, 2.25MHZ, 45° in Aluminum, Side Mount, Stainless Steel Housing | 1 | |
| SA-452T | 45 deg aluminum 2.25 MHz Top Mount | 1 | |
| SA-6010S | Transducer, 10MHZ, 60° in Aluminum, Side Mount | 1 | |
| SA-6010T | Transducer, 60° in Aluminum x 10MHz, Top Mount | 1 | |
| SA-602S | Transducer, 2.25MHZ, 60° in Aluminum, Side Mount | 1 | |
| SA-602S-SS | Transducer, 2.25MHZ, 60° in Aluminum, Side Mount | 1 | |
| SA-602T | Transducer, 2.25MHZ, 60° in Aluminum, Top Mount | 1 | |
| SA-7010S | Transducer, 10MHZ, 70° in Aluminum, Side Mount | 1 | |
| SA-7010T | Transducer, 70° in Aluminum x 10MHz, Top Mount | 1 | |
| SA-702S | Transducer, 2.25MHZ, 70° in Aluminum, Side Mount | 1 | |
| SA-702S-SS | Transducer, 2.25MHZ, 70° in Aluminum, Side Mount, Stainless Steel Housing | 1 | |
| SA-702T | Transducer, 2.25MHZ, 70° in Aluminum, Top Mount | 1 | |
| SA-745S | Transducer, 5MHZ, 74° in Aluminum, Side Mount | 1 | |
| SA-7510S | Shear Wave TD, 10MHz x 75° in Aluminum | 1 | |
| SA-805T | Small 80 Deg in Aluminum | 1 | |
| SA7010S | TRANSDUCER, 10MHZ, 70� IN ALUMINUM, SIDE MOUNT | 1 | |
| SAAB 5512-332-03I | SAAB 340 REFERENCE STANDARD 5512-332-03I FIGURE 1 PAGE 2, 55-10-00 PART 6 PAGE 3. MATERIAL: 2024-T351 ALUMINUM WITH 4 HL10 VAP-6-7 HI-LOK FASTENERS.. Includes Test Reprort and Certificate of Conformance. | 1 | |
| SB 146/53-167/2 | BAE 146-RJ SERIES REFERENCE STANDARD ISB.53-167 APPENDIX 2 DRAWING 15, PAGE 23&24. Material: Substitute 2024-T3 Clad for 2014A-T4 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SB 57-3329 FIG.9 | Raytheon 12 Hole Standard Calibration Block Figure 9 Page 20, Service Bulletin SB 57-3329. Hole sizes 9/64, 11/64,3/16 and 13/64. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| SB09550023-17 | Douglas Reference Standard Assembly 55-23 Figure1 sheets 1-5, Pages 31-35. Material: 2024-T3 Aluminum. Includes Test Report Traceable to NIST and Certificate of Conformance. | 2 | |
| SB11530001-5 | DOUGLAS MD-11 REFERENCE STANDARD. MD11-53-001 FIGURE 1 SHEET 1. MATERIAL: 7075-T6 ALUMINUM | 1 | |
| SCA2GAL-ENG | ENGINE OIL CONTAINER 2 GALLON ALUMINUM | 1 | |
| SDP.40-200H-4L | REFLECTION SPOT PROBE, 0.40 INCH (10.16 MM) OD, 50HZ TO 2KHZ, 4-PIN LEMO CONNECTOR, ALUMINUM HOUSING (TECHNA NDT OR EQUIVALENT). | 1 | |
| SDP.60-50H-3K | REFLECTION SPOT PROBE, Ø.60"OD, Ø.67" CASE, 50HZ-3KHZ, TRIAX FISCHER CONNECTOR, ALUMINUM HOUSING | 1 | |
| SDP.98-100H | Reflection Spot Probe, Ø.984" High x .630" OD, 100-500Hz, Used with 99F57204140000 see thru .315 thick Aluminum | 1 | |
| SE30-20FREP12 | ALUMINUM SEAL | 1 | |
| SN10550000 | BOEING REFERENCE STANDARD SHEETS 1-4. DETAIL -3,-5,-7. MATERIAL: 7075-T7 & 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 1 | |
| SNF26022 | ALUMINUM SERVICE JACK 2 TON | 1 | |
| SOSG05BONUS | ALUMINUM SAFETY GLASS W/BONUS | 1 | |
| SOSG05KS2PK | ALUMINUM SAFETY GLASS 2PK | 1 | |
| SP-265 | LOCKHEED C-130 STEP BLOCK. PROCEEDURE SMP 515-C. PAGE 9 MATERIAL: 7075-T6 ALUMINUM. | 1 | |
| SPD74851 | ALUMINUM ADAPTER | 1 | |
| SPO 1598 | ALUMINUM SKIN CORROSION LOSS INSPECTION (IMPEDANCE PLANE DISPLAY) | 1 | |
| SPO-3932 | EDDY CURRENT, SECOND LAYER, ALUMINUM | 1 | |
| SPT 5038-N1000/N2000 | 16-Pin Lemo to 4 Pin Cannon, 9 ft Cable, Heavy Duty w/ aluminum mesh sleeve. For the SPT weld probe. | 1 | |
| SPT 5038-N19 | 8 Pin Burndy to 4 Pin Cannon, 9 ft Cable, Heavy Duty w/ aluminum mesh sleeve. For the SPT weld probe. | 1 | |
| SRS-0824A | ALUMINUM SURFACE CRACK STANDART | 3 | |
| SRS-4A | SURFACE STANDARD, 2024-T3 ALUMINUM, .040 DEEP NOTCH | 1 | |
| SS-455A | Angle Beam Transducer, 5MHz,.187" EL x 45° in Aluminum, Top Mount | 1 | |
| SS-705A | Angle Beam Transducer, 5MHz,.187" EL x 70° in Aluminum, Top Mount | 1 | |
| SSR7 | RECESSED ALUMINUM STARTER (BLUE-POINT®) | 2 | |
| SSX535AT | SMALL TRANSDUCER, 35° IN ALUMINUM, 5 MHZ, TOP MICRODOT CONNECTOR | 1 | |
| ST8842-1 | Tap Tool, Aluminum, Brass or Steel | 6 | |
| ST8842-A | Tap Tool, Aluminum | 1 | |
| ST8870D | BOEING PERFORATED BONDED REFERENCE STANDARD ALUMINUM HONEYCOMB ALL PT4 78-30-01; PG.18 FIG.3 | 1 | |
| ST928 | STANDARD TOOL - ROLLER STAKING TOOL, ALUMINUM SLEEVE | 1 | |
| ST928-A | STANDARD TOOL - ROLLER SWAGING, ALUMINUM SLEEVE 69-38919 | 1 | |
| ST928A | ROLLER SWAGE ALUMINUM SLEEVE TOOL | 1 | |
| ST928E | ROLLER SWAGING TOOL - ALUMINUM SLEEVE, 69-38919-2 | 1 | |
| ST928F | ROLLER STAKING TOOL - ALUMINUM SLEEVE | 1 | |
| ST982L-9 | Standard tool-scraper：sealant not for use on clad aluminum | 5 | |
| ST982LF-9 | Standard tool-scraper：sealant not for use on clad aluminum | 4 | |
| STANDARD-A1 | .050" 7075-T6 ALUMINUM WITH THREE FLAT BOTTOM HOLES (2/64", 3/64", and 5/64") DRAWING "A" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) | 1 | |
| STANDARD-A2 | .080" 7075-T6 ALUMINUM WITH THREE FLAT BOTTOM HOLES (2/64", 3/64", and 5/64") DRAWING "A" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) | 1 | |
| STANDARD-A3 | .125" 7075-T6 ALUMINUM WITH THREE FLAT BOTTOM HOLES (2/64", 3/64", and 5/64") DRAWING "A" (PS21211.3 FOR F/A-18 OUTER WING FORWARD SPAR) | 1 | |
| STD-00107021 | Avcon Industries LFEC Calibration Reference Standard. BNC Document: 00107021, Rev. B Figure 7 Page 22. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance. | 1 | |
| STD-1--AL | Custom Radius Channel Standard Material: 7075-T651 ALUMINUM. Standard to include a total of 62 EDM flaws identified as A, B,C, D, E, and F in the drawing. Includes test report traceable to NIST standards which comply with MIL-Q-9858A, Mil-4-45208A. | 1 | |
| STD-1130 | CAP-PROTECTIVE, ALUMINUM, FLARELESS TUBE | 1 | |
| STDA3 | ALUMINUM A3 CERTIFIED COATED METAL PLATES STANDARD | 1 | |
| STK21892 | ALUMINUM SKIN ZIPPER | 1 | |
| STK21896 | ALUMINUM SKIN ZIPPER 2 | 1 | |
| STK35000 | 4 PC ALUMINUM COVER KIT | 1 | |
| SUM 545AT | TRANSDUCER, 5MHZ X .25", 45° IN ALUMINUM, TOP MOUNT | 1 | |
| SUSM 523AT-R1.0 | OLYMPUS NDT SUBMINITURE ANGLE BEAM TRANSDUCER 5MHZ, 23° IN ALUMINUM WITH A 1.0" RADIUS, SUPPLIED WITH AN TOP MOUNT MICRODOT CONNECTOR. INCLUDES TEST REPORT AND CERTIFICATE OF CONFORMANCE. | 1 | |
| SX545AT | TRANSDUCER, 5MHZ, 45° IN ALUMINUM, .380" X .380" X .274" CASE SIZE, TOP CONNECTOR | 1 | |
| T-04043F6 | WIRE ALUMINUM .035 | 1 | |
| T-10036 | STEEL LINER FOR ALUMINUM WIRE | 1 | |
| T-5600 | .025 ALUMINUM WIRE 1 LB SPOOL | 1 | |
| T-5601 | .030 ALUMINUM WIRE 1LB SPOOL | 1 | |
| T-90922 | ALUMINUM MIG GUN | 1 | |
| T-MA-345 | VISE CAP ALUMINUM 4.5IN | 1 | |
| T.53.03 | SHORTS REFERENCE STANDARD Shorts SD 3-30, 53 pages 3-8. Material: 2024-T3 or 2014 AluminumIncludes Test Report and Certificate of Conformance. | 1 | |
| T75449-1 | ALUMINUM TAPPING HAMMER | 1 | |
| TB-B1-T-20 | 00-LB 4-WHEEL MULTIPLE COLORS/FINISHES ALUMINUM COVERTIBLE HAND TRUCK | 1 | |
| TB5939-4 | IIW-2 CALIBRATION BLOCK 7075 ALUMINUM | 1 | |
| TB5939-4 IIW-2 | CALIBRATION BLOCK 7075 ALUMINUM | 1 | |
| TCW-33A-72R | Wedge, Screw-in type, 72mm Radius, 33deg in aluminum | 2 | |
| TCW-33A-80R | Wedge, Screw-in type, 80mm Radius, 33deg in aluminum | 1 | |
| TEK-0204-45AT | Transducer, 2.25MHz, 45 deg, Shear Aluminum, Rt Angle Microdot Connector | 1 | |
| TEK-0503-45AT | Transducer, 5MHz, .187 EL, 45° in Aluminum, Top Mount | 1 | |
| TEK-0503-60AT | Transducer, 5MHz, .187 EL, 60° in Aluminum, Top Mount | 1 | |
| TEK-0503-70AT | Transducer, 5MHz, .187 EL, 70° in Aluminum, Top Mount | 1 | |
| TEK-1573-AL | Special Vertical Inspection Edge Probe, Aluminum, 50-500kHz | 1 | |
| TEK-4074 | LF Sliding Probe, Reflection, 100Hz-40kHz, Aluminum Housing, 4pin Fischer, A330, 53-21-56 | 1 | |
| TEK-4075 | LF Spot Probe, Reflection, 20Hz-10kHz, 39mm diameter, 30mm active areaAnodized Aluminum Housing, 4pin Fischer | 1 | |
| TEK-5061F | Transducer, 51 Degree in aluminum, 767 PT4 53-80-02 | 1 | |
| TEK-5061R | Transducer, 32 Degree in aluminum, 767 PT4 53-80-02 | 1 | |
| TEK-5062 | Transducer, 22° in Aluminum, 5MHz, 120mm Radius shoe, Top Mount | 2 | |
| TEK-5110-75° | Transducer, 5MHz, 75° in Aluminum, 1.0Lx.31Wx.75H | 1 | |
| TEK-5117-36 | 36° Refracted Shear Wave Search Unit, 5MHz, with 5" Handle, Aluminum | 1 | |
| TEK-5117-45 | 45° Refracted Shear Wave Search Unit, 5MHz, with 5" Handle, Aluminum | 1 | |
| TEK-5117-60 | 60° Refracted Shear Wave Search Unit, 5MHz, with 5" Handle, Aluminum | 1 | |
| TEK-5495 | Transducer, 2.25MHZ, 70° in Aluminum, Top Mount | 1 | |
| TEK-5547P1 | Boeing Positioner, Aluminum | 1 | |
| TEK-5547P2 | Boeing Positioner, Aluminum | 1 | |
| TEK-5547P3 | Boeing Positioner, Aluminum | 1 | |
| TEK-5547P4 | Boeing Positioner, Aluminum | 1 | |
| TEK-5547P5 | Boeing Positoner Aluminum | 1 | |
| TEK-5549 | UT TRANSDUCER 10MHZ 70° IN ALUMINUM, TOP MOUNT CONNECTOR | 1 | |
| TEK-5557 | 5MHZ, .187, 60 DEG ALUMINUM, TOP MOUNT MD, .375L X.300W X.750H | 1 | |
| TEK-5557-70T | 5MHZ, .187, 70 DEG ALUMINUM, TOP MOUNT MD, .375L X.300W X.750H | 1 | |
| TEK-5557/45S | 5mhz, .187, 45 deg Aluminum, Side mount MD, .375L x.300W x.750H | 1 | |
| TEK-5557/45T | 5mhz, .187, 45 deg Aluminum, Top mount MD, .375L x.300W x.750H | 1 | |
| TEK-5557/55T | 5mhz, .187, 55 deg Aluminum, Top mount MD, .375L x.300W x.750H | 1 | |
| TEK-5557/60S | 5mhz, .187, 60 deg Aluminum, Side mount MD, .375L x.300W x.750H | 2 | |
| TEK-5557/60T | 5mhz, .187, 60 deg Aluminum, Top mount MD, .375L x.300W x.750H | 2 | |
| TEK-5557/65T | 5mhz, .187, 65 deg Aluminum, Top mount MD, .375L x.300W x.750H | 1 | |
| TEK-5557/70S | 5mhz, .187, 70 deg Aluminum, Side mount MD, .375L x.300W x.750H | 1 | |
| TEK-5557/70T | 5mhz, .187, 70 deg Aluminum, Top mount MD, .375L x.300W x.750H | 1 | |
| TEK-5558 | 45deg., end connector, 5MHz, Aluminum | 1 | |
| TEK-5558/60S | 2.25mhz, .187, 60 deg Aluminum, Side mount MD, .375L x.300W x.750H | 1 | |
| TEK-5558/60T | 2.25mhz, .187, 70 deg Aluminum, Top mount MD, .375L x.300W x.750H | 1 | |
| TEK-5558/70S | 2.25mhz, .187, 70 deg Aluminum, Side mount MD, .375L x.300W x.750H | 1 | |
| TEK-5558/70T | 5mhz, .250x.150, 70 deg Aluminum, Top mount MD, .400L x.315W x.750H | 2 | |
| TEK-5823A | Transducer, 8MHz, 70°, Aluminum, CEP23 | 1 | |
| TEK-6007 | EDDY CURRENT, SECOND LAYER, ALUMINUM | 1 | |
| TEK-6034C | Flat Standard with Radius Notch, Cast Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| TEK-6034F | Flat Standard with Radius Notch, Forged Aluminum, per ABS PT3 32-42-05 PG15:PROC1 FIG11 | 1 | |
| TEK-6200-A | Hole Standard, 20 Holes 5/32" to 3/4", with Countersinks, .020" thru Notch at CS to Fay, .030" corner in top plate, 7075T6 Aluminum | 1 | |
| TEK-9017 | R&D Bombardier 10Mhz .187x.110, 70deg aluminum | 1 | |
| TEK5558 | 45DEG., END CONNECTOR, 5MHZ, ALUMINUM | 1 | |
| TF-7601648-NF | DUMMY, FILTER ELE-MENT - ALUMINUM | 1 | |
| THPWA24AA | T/H 24IN ALUMINUM PIPE WRENCH | 1 | |
| TL900L | 9IN ALUMINUM | 1 | |
| TP-A3RS-1.0-MM-2 | SURFACE INSPECTION OF ALUMINUM PARTS | 1 | |
| TP54 | AIRBUS REFERENCE STANDARD A318-A321 51-63-07-PB1, PAGE 2 SHEET 01. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| TP54-02-1 | AIRBUS REFERENCE STANDARD, NTM 53-41-86, A300-600 PT 6 51-10-01, A318-A321 51-63-07-PB1, PAGE 2 SHEET 01. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance. | 2 | |
| TP575 | MINI-AIR VACUUM – ALUMINUM | 2 | |
| TP792 | ALUMINUM SNIPS 12" LENGTH | 1 | |
| TR71 | BAC Custom Lightweight Towbar, 0.85 in Hook Dia, 8 ft 4 in L, Aluminum, Powder-Coated, Orange | 2 | |
| TR72 | BAC Custom Lightweight Towbar, 1-1/4 in Hook Dia, 8 ft 4 in L, Aluminum, Powder-Coated, Orange | 4 | |
| TR73 | BAC Custom Lightweight Towbar, 3/4 in Hook Dia, 8 ft 4 in L, Aluminum, Powder-Coated, Orange | 2 | |
| TR74 | BAC Custom Lightweight Towbar, 3/4 in Hook Dia, 8 ft 4 in L, Aluminum, Powder-Coated, Orange | 2 | |
| TRS-5-1A-2024T3 | ALUMINUM 5 STEP WEDGE, STEP THICKNESS: .100", .200", .300", .400", .500" MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: .75" X .75" TOLERANCE = ± .001 | 1 | |
| TRS-6-10A | THICKNESS REFERENCE STANDARD, 6 STEP ALUMINUM | 1 | |
| TRS-6-12A | Custom 6 Step Wedge .020", .040", .080", .150" ,0.300", 0.600" +/-.001", Per Drawing Specification TXX003503. Material: 2219-T81 Aluminum. Includes Teflon Base. | 1 | |
| TSB3305212 | TCT SAW BLADE FOR ALUMINUM | 1 | |
| TYSCCS21-28 | CALIBRATION BLOCK FOR ALUMINUM | 1 | |
| TYTB125-15 | BAC Multi-Link Towbar, 4 in Tube Dia, 15 ft L, Aluminum, Powder-Coated, Yellow | 2 | |
| TYTB75-15 | BAC Multi-Link Towbar, 3 in Tube Dia, 15 ft L, Aluminum, Powder-Coated, Yellow | 3 | |
| TYTBFTD | BAC Flat Tire Dolly Towbar, 12 ft L, Aluminum/Steel, Powder-Coated, Yellow | 2 | |
| U8438014 | ANGLE BEAM TRANSDUCER 45 DEG SHEAR WAVE IN ALUMINUM | 1 | |
| U8438016 | ANGLE BEAM TRANSDUCER 70 DEG SHEAR WAVE IN ALUMINUM | 1 | |
| U8860407 | ALUMINUM (7075-T6) MULTI-HOLE REFERENCE STANDARD WITH CERTIFICATE TRACEABLE TO NIST | 1 | |
| UT-RC-5S1018 | ALUMINUM STEP CALIBRATION LOCK WITH AT LEAST 0.10 | 1 | |
| UT-RC-5S7075-C1 | 5-STEP CALIBRATION BLOCK, 7075 ALUMINUM | 1 | |
| V1 | V1 STANDARD REFERENCE STANDARD IIW 1 (TYPE V1), MADE FROM ALUMINUM | 3 | |
| V1 ALUMINUM STANDARD | CALIBRATION BLOCK, OLYMPUS PN MHS‐29‐1A‐0, ALUMINUM ALLOY WITH EDM HOLES (FROM: 1/8 IN TO 1 IN) | 1 | |
| V2 | V2 TEST BLOCK STEEL THICKNESS: 20mm/ THICKNESS: 25mm/ INCLUDED MAKER CERTIFICATION AND ABS PLASTIC CASE MATERIAL AVAILABLE FOR ALUMINUM 25mm/ STANLESS STEEL 20mm/ STANLESS STEEL 25mm/ | 2 | |
| V2 ALUMINUM STANDARD | V2 STANDARD REFERENCE STANDARD TYPE V2), MADE FROM ALUMINUM | 1 | |
| V2-AL | MINI ANGLE BEAM ALUM V2 BLOCK ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). Aluminum 7075-T6. Includes form fitted case. | 1 | |
| VM7-124 | MINIATURE INTEGRAL ANGLE BEAM TRANSDUCER, 5.0 MHZ, 0.375 IN. (9.53 MM) H X 0.375 IN. (9.53 MM) L X 0.260 IN. (6.60 MM) W; 80 DEGREES REFRACTED ANGLE IN ALUMINUM, TOP MICRODOT CONNECTOR (VM PRODUCTS INC. OR EQUIVALENT). | 1 | |
| VM89A | GENERAL PURPOSE EDDY CURRENT REFERENCE STANDARD, 7075-T6 ALUMINUM, 12 HOLES 3/16” TO ¾” DIAMETERS, EACH HOLE CONTAINS A .030” X .030” CORNER EDM NOTCH, THREE SURFACE NOTCHES - .010”, .020” & .040” DEEP X ¾” LONG | 1 | |
| VP6485 | KILLARK VP6485 PIN AND SLEEVE PLUG, 3 WIRE, 4 POLE, 60 AMP, 600V, COPPER-FREE ALUMINUM | 1 | |
| W-87 REF STD IBD | BOEING REFERENCE STANDARD. W-87 INBOARD 360 REFERENCE STANDARD. Materials: 2024-T351 and 7075-T651 Aluminum. Includes Test Report Traceable to NIST. | 1 | |
| W-87 REF STD OBD | BOEING REFERENCE STANDARD. W-87 OUTBOARD 360 REFERENCE STANDARD. Materials: 2024-T351 and 7075-T651 Aluminum. Includes Test Report Traceable to NIST. | 1 | |
| W201 | LUCITE WEDGE 45° SHEAR WAVE IN ALUMINUM USED WITH .25" ELEMENT TRANSDUCER (.75"L x .45"W x .37"H) | 1 | |
| W202 | 60° IN ALUMINUM LUCITE (PLEXIGLASS) WEDGE, 3/8-32 THREAD USED WITH A .25"Ø DIAMETER TRANSDUCER WITH A 3/8-32 THREAD. Includes Certificate of Conformance.(1.0"L x .45"W x .50"H). MSWQCW 203-70. Includes Certificate of Conformance. | 1 | |
| W203 | LUCITE WEDGE 70° SHEAR WAVE IN ALUMINUM USED WITH .25" ELEMENT TRANSDUCER (1.0"L x .45"W x .50"H) | 1 | |
| WCI-FR-A30-1910 | Final Reamer (for 3/16" aluminum rivet) | 1 | |
| WCI-FR-A40-2500 | Final Reamer (for 1/4" aluminum rivet) | 1 | |
| WCI-FR-A41-2656 | Final Reamer (for 17/64" aluminum rivet) | 1 | |
| WVA4 | CAPS, JAW, ALUMINUM | 1 | |
| XA-3510T | Extra Small 35 Degree, Aluminum, Top Connector | 1 | |
| XA-352S | Extra Small 35 Degree, Aluminum, Side Connector | 1 | |
| XA-352T | Extra Small 35 Degree, Aluminum, Top Connector | 1 | |
| XA-355S | Extra Small 35 Degree, Aluminum, Side Connector | 1 | |
| XA-355T | Extra Small 35 Degree, Aluminum, Top Connector | 1 | |
| XA-405S | TRANSDUCER, 5MHZ, 40° IN ALUMINUM, SIDE MOUNT | 1 | |
| XA-4510S | Transducer, 10MHZ, 45° in Aluminum, Side Mount | 1 | |
| XA-4510T | Transducer, 10MHZ, 45° in Aluminum, Top Mount | 1 | |
| XA-452S | Transducer, 2.25MHZ, 45° in Aluminum, Side Mount | 1 | |
| XA-452T | Transducer, 2.25MHZ, 45° in Aluminum, Top Mount | 1 | |
| XA-455S | Transducer, 5MHZ, 45° in Aluminum, Side Mount | 1 | |
| XA-455T | Transducer, 5MHZ, 45° in Aluminum, Top Connector | 2 | |
| XA-455T-1 | Transducer, 5MHZ, 45° in Aluminum, Top Connector, No grip | 1 | |
| XA-455T-SS | Transducer, 5MHZ, 45° in Aluminum, Top Connector, Stainless Steel Housing | 1 | |
| XA-5010S | Transducer, 10MHZ, 50 in Aluminum, Side Connector | 1 | |
| XA-520T | Extra Small 20 Degree, Aluminum, Top Connector | 1 | |
| XA-525T | Extra Small 25 Degree, Aluminum, Top Connector | 1 | |
| XA-530T | Extra Small 30 Degree, Aluminum, Top Connector | 1 | |
| XA-545T | Transducer, 5MHZ, 54 in Aluminum, Top Connector | 1 | |
| XA-5510S | Transducer, 10MHZ, 55° in Aluminum, Side Mount | 1 | |
| XA-555S | Transducer, 5MHZ, 55° in Aluminum, Side Mount | 1 | |
| XA-575T | Transducer, 5MHZ, 57° in Aluminum, Top Mount | 1 | |
| XA-6010S | Transducer, 10MHZ, 60° in Aluminum, Side Mount | 1 | |
| XA-602S | Transducer, 2.25MHZ, 60° in Aluminum, Side Mount | 1 | |
| XA-605S | Transducer, 5MHZ, 60° in Aluminum, Side Mount | 2 | |
| XA-605S-SS | Transducer, 5MHZ, 60° in Aluminum, Side Mount, Stainless | 1 | |
| XA-605T | Transducer, 5MHZ, 60° in Aluminum, Top Connector | 1 | |
| XA-605T-1 | TRANSDUCER, 5MHZ, 60° IN ALUMINUM, .37 X .37 X .25, TOP CONNECTOR, BAE 146 SERIES/AVRO-RJ SERIES PT4 | 1 | |
| XA-605T-SS | Transducer, 5MHZ, 60° in Aluminum, Top Connector | 1 | |
| XA-655S | Transducer, 5MHZ, 65° in Aluminum, Side Mount | 1 | |
| XA-675T | Transducer, 5MHZ, 67° in Aluminum, STop Mount | 1 | |
| XA-7010S | Transducer, 10MHZ, 70° in Aluminum, Side Mount | 1 | |
| XA-7010T | Transducer, 10MHZ, 70° in Aluminum, Top Mount | 1 | |
| XA-702S | Transducer, 2.25MHZ, 70° in Aluminum, Side Mount | 1 | |
| XA-702T | Transducer, 2.25MHZ, 70° in Aluminum, Top Mount | 1 | |
| XA-705S | Transducer, 5MHZ, 70° in Aluminum, Side Connector | 3 | |
| XA-705T | Transducer, 5MHZ, 70° in Aluminum, Top Connector | 1 | |
| XA-705T-1 | Transducer, 5MHZ, 70° in Aluminum, Top Connector, (.130" x .187") Element, Case size (.32" L x .42" H x .24" W) | 1 | |
| XA-705T-SS | Transducer, 5MHZ, 70° in Aluminum, Top Connector | 1 | |
| XA-755S | Transducer, 5MHZ, 75° in Aluminum, Side Mount | 1 | |
| XA-755T | Transducer, 5MHZ, 75° in Aluminum, Top Mount | 1 | |
| XAB6056 | TRANSDUCER, 51° IN ALUMINUM, 767 PT4 53-80-02 | 1 | |
| XAB6057 | TRANSDUCER, 32° IN ALUMINUM, 767 PT4 53-80-02 | 1 | |
| XXA-2710T | Small Transducer, Aluminum, 27 Degree, 10 MHZ | 1 | |
| XXA-3010T | Small Transducer, Aluminum, 30 Degree, 10 MHZ | 1 | |
| XXA-3510T | Small Transducer, Aluminum, 35 Degree, 10 MHZ | 1 | |
| XXA-355T | Small Transducer, Aluminum, 35 Degree, 5 MHZ | 1 | |
| XXA-4010T | Small Transducer, Aluminum, 40 Degree, 10 MHZ | 1 | |
| XXA-4510T | Small Transducer, Aluminum, 45 Degree, 10 MHZ | 1 | |
| XXA-605T | Small Transducer, Aluminum, 60 Degree, 5 MHZ | 1 | |
| M/C-40991062 | ALUMINUM SAW BLADE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
