| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| F71252 | ADAPTER GEAR | 12 | |
| PWC50026 | Adapter Gear | 1 | |
| PWC66668 | Adapter GEAR | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
| 02-7833C0110 | Tronair 02-7833C0110 Blue 12-Ton Hydraulic Axle Jack with MainNose Gear Adapters (CE) | 3 | |
| 071-06018-0006 | ADAPTER CAPSTAN GEAR | 1 | |
| 0806.11 | ADAPTER JACKING NOSE LANDING GEAR | 1 | |
| 1006776 | MAIN LANDING GEAR TORQUE ADAPTER | 2 | |
| 109-3501-08-115 | ADAPTER, LANDING GEAR SHOCKSTRUTS NITROGEN CHANGE | 1 | |
| 109-3900-89-101 | JACKS & ADAPTERS, - MAIN AND NOSE LANDING GEAR | 1 | |
| 1159GSE40214-7 | MAIN GEAR AXLE JACK PAD ADAPTER | 2 | |
| 1159GSE50214-1 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 1159GSE50214-3 | MAIN GEAR AXLE JACK ADAPTER | 4 | |
| 1159SEM20375-1 | 90 DEGREE GEAR/FLAP ADAPTER | 6 | |
| 1159SEM30001-11 | MAIN GEAR AXLE JACK PAD ADAPTER | 1 | |
| 1159SEM30001-17 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 11MIT65B01231-1 | TORQUE ADAPTER - RESTRICTOR SUPPORT TUBE, BODY LANDING GEAR | 1 | |
| 159GSE50214-3 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 185479-1GTA | GEAR SUN TORQUE ADAPTER | 1 | |
| 19MIT65B01211-1 | TORQUE ADAPTER - NUT, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
| 1SF5085-501/PWA81903A | JT9D Engine Gearbox Oil Leak Test Adapter/Gauge | 1 | |
| 1X25170023 | MAIN GEAR BOX ADAPTER | 1 | |
| 2024024-1 | GEARBOX HOUSING ADAPTER | 1 | |
| 20MIT65B01211-1 | ADAPTER WRENCH - NUT, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
| 213596-0 | MAINTENANCE KIT (INCLUDING:TORQUE WRENCH AND ADAPTERS FOR FLOTATION GEAR MAINTENANCE) | 1 | |
| 23005426 | Guide â Spur Adapter, Gear shaft | 4 | |
| 23006764 | GAGE-RETAINING RING, SPUR ADAPTER GEAR SHAFT | 2 | |
| 23006778 | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 23006778- | GUIDE BEARING SPUR ADAPTER GEARSHAFT (PM) | 5 | |
| 23006780 | RING----SPLINED, SPUR ADAPTER GEAR, BALANCE | 2 | |
| 23006785 | SPUR ADAPTER GEAR INSTALL TOOL | 2 | |
| 23054758 | Adapter – Splined, Frame Assembly, Upper Gearbox | 1 | |
| 2317-T020-401 | PHENOM 300 NOSE GEAR JACK ADAPTER | 2 | |
| 25-9Y27-1A | NOSE GEAR AND DOORS ADAPTER | 5 | |
| 25G9910009-501 | NOSE LANDING GEAR ADAPTER | 2 | |
| 269A3150-5-80901 | Adapter Lower Cap & T Pin Landing Gear | 2 | |
| 269A3150-5-80903 | Landing Gear Wrench Adapter | 1 | |
| 269A3150-5-80904 | Torque Wrench Adapter Landing Gear | 2 | |
| 27-1-2736/2505 | Adapter Nose Gear | 1 | |
| 28-0-4922 | ADAPTER, MAIN LANDING GEAR | 1 | |
| 291993-1 | BALANCING GEARSHAFT ADAPTER ASSEMBL | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294866-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE FOR REMOVING 3860181-1 SPUR GEAR | 1 | |
| 294866-2 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR | 1 | |
| 294866-3 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 294866-5 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 294866-6 | BEARING REMOVAL ADAPTER (LOCATES LARGER INSIDE DIAMETER OF 3860180-2 SPUR GEARSHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEARSHAFT FROM 3605094-1 BEARING | 1 | |
| 296945-1 | GEARBOX HOISTING ADAPTER | 1 | |
| 2C5693G01 | ADAPTER, ACCESSORY DRIVE GEARBOX HOIST | 1 | |
| 2C6105 | ADAPTER,DRIVE-TURBINE REVERSER GEARBOX | 1 | |
| 2C6105P01 | ADAPTER DRIVE; ANGLE GEARBOX | 1 | |
| 2C90502G01 | ADAPTER FOR THE PROPELLER GEARBOX SLING | 1 | |
| 2MIT65B01202 | WRENCH ADAPTER - GLAND NUT, NOSE GEAR | 8 | |
| 2MIT65B01202-1 | Wrench adapter-gland nut，nose gear | 1 | |
| 2MIT65B01203 | TORQUE ADAPTER - RETAINER NUT, BODY LANDING GEAR TRUNNION | 2 | |
| 2MIT65B01501 | TORQUE ADAPTER - WING LANDING GEAR RETRACT ACTUATOR | 1 | |
| 2MIT65B01502 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | 2 | |
| 2MIT65B01504-1 | TORQUE ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
| 2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
| 2MIT65B82585 | TORQUE ADAPTER - RETRACT ACTUATOR, NOSE LANDING GEAR | 1 | |
| 2TSJ65B01504-1 | TEST ADAPTER - VENT VALVE, TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 1 | |
| 332A91-4105-02 | JACK ADAPTER PAD, MAIN LANDING GEAR, TOOL | 1 | |
| 332A91410502 | JACK-ADAPTER PAD MAIN LANDING GEAR | 1 | |
| 369A6300-80906 | Wrench Adapter, Landing Gear Damper | 1 | |
| 390-810000/928 | JACK ADAPTER-MAIN LDG GEAR | 2 | |
| 3G6505G00831 | TAIL ROTOR GEAR BOX SUPPORT TROLLEY ADAPTER | 1 | |
| 3ME65B00161-1 | SPANNER ADAPTER - TORQUE WRENCH, WING GEAR TRUNNION | 6 | |
| 3MIT65B01519-1 | TORQUE ADAPTER - WRENCH, STEERING METERING VALVE, NOSE LANDING GEAR | 11 | |
| 3MIT65B40627 | ADAPTER - TORQUE, NOSE LANDING GEAR BUILDUP | 1 | |
| 3MIT65B82585 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 2 | |
| 3TE65-73762 | JACKING ADAPTER -0 NOSE GEAR INST’L | 3 | |
| 4916706-521 | Adapter-torque，main landing gear axle nut | 1 | |
| 4916706-527 | Adapter-torque，main landing gear axle nut | 5 | |
| 4916706-529 | ADAPTER-TORQUE，MAIN LANDING GEAR AXLE NUT | 5 | |
| 4916706-531 | Adapter-torque，main landing gear axle nut | 2 | |
| 4916745-501 | Adapter-torque，main gear door cylinder jam nut | 8 | |
| 4916795-509 | NOSE GEAR TORQUE ADAPTER | 4 | |
| 4952591 | Adapter-torque，main landing gear wheel bolt | 1 | |
| 4MIT65B01201-1 | Torque Adapter -Wing Landing Gear Drag Brace Strut | 3 | |
| 4MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| 507.20.12.050 | PC-12 SINGLE POINT NOSE LANDING GEAR JACK ADAPTER | 1 | |
| 507.20.12.051 | MAIN GEAR ADAPTER PC 12 | 1 | |
| 5916703-501 | NOSE GEAR JACK ADAPTER | 8 | |
| 5916733-505 | MAIN GEAR TRUNNION BOLT ADAPTER | 3 | |
| 5936856-501 | NOSE GEAR DRAG LINK TORQUE ADAPTER | 2 | |
| 5955282-1 | MAIN GEAR TRUNNION BOLT ADAPTER | 4 | |
| 5MIT65B01231-1 | CROWFOOT WRENCH - ADAPTER, RETAINER NUT, BODY LANDING GEAR | 1 | |
| 5MIT65B01500-1 | TORQUE ADAPTER SET - RETRACT ACTUATOR WING, NOSE AND BODY LANDING GEAR | 2 | |
| 5MIT65B01502-1 | TORQUE ADAPTER - RETRACT ACTUATOR, BODY LANDING GEAR | 1 | |
| 68816 | ADAPTER GEAR CARRIER | 1 | |
| 6796692 | ADAPTER,STAN,REDUCTION GEAR | 2 | |
| 6796693 | ADAPTER - STAND, REDUCTION GEAR REAR CASE | 2 | |
| 6796820 | ADAPTER – ATTACHING REDUCTION GEAR UNIT TO 6796838 ADAPTER | 1 | |
| 6796891 | ADAPTER - TORQUE REDUCTION GEAR FILTER | 3 | |
| 6797353 | ADAPTER STAND, REDUCTION GEAR ASSEMBLY | 2 | |
| 6797418 | ADAPTER, REDUCTION GEAR REAR CASE | 1 | |
| 6798984 | ADAPTER REDUCTION GEAR HOUSING FRONT AND REAR | 1 | |
| 6799870 | ADAPTER, HOLDDOWN, MAIN DR. GEAR | 1 | |
| 6799875 | ADAPTER, HOLDDOWN, MAIN DR. GEAR | 2 | |
| 6851348 | ADAPTER - GEAR BOX COVER | 2 | |
| 6872646 | GUIDE一SPUR ADAPTER GEARSHAFT BEARING | 2 | |
| 6893501 | DRIFT - SPUR ADAPTER GEARSHAFT | 1 | |
| 6893503 | GAGE--SPLINE, SPUR ADAPTER GEARSHAFT AND SECOND-STAGE SPLINED ADAPTER CHECKING | 2 | |
| 6MIT65B01201-1 | WRENCH ADAPTER - NUT, LOWER DRAG BRACE, WING LANDING GEAR | 3 | |
| 6MIT65B01231-1 | TORQUE ADAPTER - BEARING RETAINER NUT, BODY LANDING GEAR | 4 | |
| 6MIT65B01502 | TORQUE ADAPTER - BODY LANDING GEAR RETRACT ACTUATOR | 2 | |
| 6MIT65B01503 | ADAPTER - TORQUE WRENCH, ROD END, NOSE LANDING GEAR STEERING ACTUATOR | 3 | |
| 6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
| 70700-20420-041 | MAIN GEAR BOX ADAPTER | 1 | |
| 833927-1 | GEARBOX ASSEMBLY HOIST ADAPTER | 1 | |
| 833978-1 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860165-1 OIL PUMP SPUR GEAR FROM 358027 BEARINGS) | 1 | |
| 833978-4 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860166-1 HIGH SPEED PINION GEAR FROM 3860158-1 BEARING) | 1 | |
| 833978-5 | BEARING REMOVAL ADAPTER (LOCATES IN SMALLER INSIDE DIAMETER OF 3860180-2 SPUR GEAR SHAFT TO PROVIDE A PRESSING SURFACE WHEN REMOVING SPUR GEAR FROM 3605094-1 BEARING) | 1 | |
| 833978-6 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 833978-7 | BEARING REMOVAL ADAPTER (PROVIDES A PRESSING SURFACE WHEN REMOVING 3860182-1 SPUR GEAR FROM | 1 | |
| 856A1039 | ADAPTER-INLET GEARBOX TO POWER ARM | 1 | |
| 856A1039 G01 | Adapter - Inlet Gearbox to Power Arm | 11 | |
| 856A1039G01 | Adapter - Inlet Gearbox to Power Arm (adapter) | 11 | |
| 856A3544G01 | ADAPTER FLANGE TRANS. GEAR BOX | 1 | |
| 856A3544G02 | ADAPTER FLANGE TRANS. GEAR BOX | 1 | |
| 856A3544G03 | ADAPTER FLANGE - TRANSFER GEARBOX | 8 | |
| 856A3551 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE RESTRICTOR | 1 | |
| 856A3551G01 | TOOL SET, REMOVAL/INSTALLATION - TRANSFER GEARBOX ADAPTER AND NIPPLE rESTRICTOR | 6 | |
| 8G3260G00131 | MAIN LANDING GEAR MICRO SWITCH TEST BOX ADAPTER | 1 | |
| 8MIT65B01221-4 | ADAPTER WRENCH - NUT, RESTRICTOR TUBE, NOSE LANDING GEAR | 1 | |
| 8MIT65B01231-1 | TORQUE ADAPTER - INNER CYLINDER NUT, BODY LANDING GEAR | 1 | |
| 9480M03 | ADAPTER, POWER ARM TRANSFER GEARBOX | 1 | |
| 95-92308-003 | ADAPTER JACKING MAIN LANDING GEAR | 1 | |
| 956A7613 | ADAPTER - LOCKING, ACCESSORY GEARBOX | 2 | |
| 956A8931 | ADAPTER - DRIVE SPLINES - GEAR - TGB/AGB | 1 | |
| 98A32001001200 | TOOL: ADAPTER LANDING GEAR 5100 | 3 | |
| 98D07103001042 | ADAPTER JACK MAIN GEAR A320 | 3 | |
| 98F12108458000 | ADAPTER - FILLING, GEARBOX | 8 | |
| 98S61005002000 | TORQUE ADAPTER PROP TO GEARBOX | 6 | |
| A27078-1 | ADAPTER SPLINE GEAR | 1 | |
| A27078-7 | SPLINE ADAPTERS - LEADING EDGE SLAT DRIVE ROTARY ACTUATORS AND GEARBOXES | 1 | |
| A27117-1 | LE SLAT GEARBOX ADAPTER | 8 | |
| A320-251 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 19 | |
| A32004-1 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 12 | |
| A32004-4 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 1 | |
| A32004-5 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 2 | |
| A32020-1 | HOIST ADAPTER - DRAG STRUT, NOSE LANDING GEAR | 13 | |
| A32020-8 | HOIST ADAPTER - DRAG STRUT, NOSE LANDING GEAR | 2 | |
| A32020-8. | ADAPTER - HOIST, NOSE LANDING GEAR DRAG STRUT | 2 | |
| A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
| A32025-1 | WRENCH ADAPTER - WHEEL RETAINING AXLE NUT, NOSE LANDING GEAR | 19 | |
| A32034-1 | WRENCH ADAPTER - STEERING NUT, NOSE LANDING GEAR (NLG) | 8 | |
| A32041-1 | TORQUE ADAPTER - CYLINDER, NOSE LANDING GEAR (NLG) RETRACT ACTUATOR | 2 | |
| A32045-108 | GEAR ADAPTER | 8 | |
| A32045-109 | GEAR ADAPTER | 8 | |
| A32078-1 | ADAPTER SET - RETAINING NUT, ACTUATOR SIDE AND DRAG BRACE, MAIN LANDING GEAR (MLG) | 1 | |
| A32101-1 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 27 | |
| A32120-1 | TORQUE ADAPTER SET - ACTUATOR COMPONENTS, MAIN LANDING GEAR (MLG) | 1 | |
| AGE -00599-401 | ADAPTER - HOISTING, MAIN LANDING GEAR | 6 | |
| AGE-00017-401 | Main gear jack adapter | 1 | |
| AGE-00046-401 | Nose Gear Jack Adapter | 1 | |
| AGE-00065-401 | ADAPTER- HOISTING, MAIN LANDING GEAR | 1 | |
| AGE-00065-403 | ADAPTER - HOISTING, NOSE LANDING GEAR | 6 | |
| AGE-00599-401 | ADAPTER - HOISTING, MAIN LANDING GEAR | 6 | |
| AGE-0065-403 | ADAPTER - HOISTING, NOSE LANDING GEAR | 1 | |
| AGE-01575-401 | ADAPTER WHEEL CHANGE MAIN LANDING GEAR | 1 | |
| AGE-05499-401 | ADAPTER MAIN LANDING GEAR WHEEL CHANGE | 1 | |
| AGE00046-401 | NOSE GEAR JACK ADAPTER | 1 | |
| AGE00065-403 | NOSE LANDING GEAR ADAPTER | 6 | |
| AGEâ?00065â?403 | NOSE LENDING GEAR HOISTING ADAPTER | 6 | |
| AGEâ?00599â?401 | MAIN LANDING GEAR HOISTING ADAPTER | 6 | |
| B32004-1 | HOIST ADAPTER - DRAG STRUT, NOSE LANDING GEAR (NLG) | 9 | |
| B32008-1 | HOIST ADAPTER - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 6 | |
| B32015-38 | HOISTING ADAPTER SET - MAIN LANDING GEAR COMPONENTS | 8 | |
| B32036 | ADAPTER -0 ACTUATOR, LANDING GEAR TRUCK | 1 | |
| B32036-1 | ADAPTER - ACTUATOR, LANDING GEAR TRUCK POSITIONER | 3 | |
| B32054 | ADAPTER -0 UPLOCK, MAIN LANDING GEAR | 1 | |
| B32054-1 | ADAPTER - UPLOCK, MAIN LANDING GEAR (MLG) | 6 | |
| B32071-1 | HOIST ADAPTER EQUIPMENT - RETRACT ACTUATOR, MAIN LANDING GEAR (MLG) | 4 | |
| B57003-3 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-33 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 11 | |
| B57003-34 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 2 | |
| B57003-4 | ADAPTER EQUIPMENT - TRUNNION BEARING AND MOUNT, MAIN LANDING GEAR (MLG) INSTALLATION AND REMOVAL | 1 | |
| B78016-9 | ADAPTER WORM GEAR | 4 | |
| BENCH VISE | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| C32013-1 | Torque Wrench Adapter - Aft Bearing Retainer Nut, Main Landing Gear Trunnion | 16 | |
| C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 8 | |
| C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32039-1 | Adapter - Functional Test, Nose Landing Gear Steering Actuator | 9 | |
| C32048 | ADAPTER ASSY-UPLOCK,MAIN LANDING GEAR | 1 | |
| C32048-1 | Adapter Assembly - Uplock, Main Landing Gear | 15 | |
| C32048-2 | ADAPTER ASSEMBLY - UPLOCK, MAIN LANDING GEAR | 2 | |
| C47943 | C47943 ADAPTER - FORWARD LANDING GEAR BARREL SCISSORS MIDDLE PIN NUT | 5 | |
| CP30248 | ADAPTER - LEFT HAND (ON-WING GEARBOX REMOVAL) | 1 | |
| CP30249 | ADAPTER - CENTER (ON-WING GEARBOX REMOVAL) | 1 | |
| CP30250 | ADAPTER - RIGHT HAND (ON-WING GEARBOX REMOVAL) | 1 | |
| CZZ1506CZZ | ADAPTER GEARBOX H.S. | 1 | |
| D22625000 | ADAPTER FOR SINGLE WHEEL NOSE GEAR | 1 | |
| D22637000 | ADAPTER FOR MAIN LANDING GEAR | 1 | |
| D22827000 | NOSE LANDING GEAR JACK ADAPTER | 8 | |
| DZZ7020-1 | Adapters-horiz stab acme screw+gear box | 5 | |
| E0006 | Adapter Gearbox Drive Shaft | 1 | |
| E0013 | Grease Gun Adapter Gearbox Drive Shaft | 1 | |
| F70306-1 | Torque adapter skid detector nut main landing gear | 4 | |
| F70312-20 | ADAPTER - TORQUE, RETRACT ACTUATOR NOSE LANDING GEAR | 1 | |
| F70312-3 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATO | 10 | |
| F71252 | Adapter or Pinion Gear Wrench Assembly | 12 | |
| F71267 | ADAPTER OR PINION GEAR WRENCH ASSEMBLY | 25 | |
| F72930-1 | Torque adapter-main landing gear side strut | 1 | |
| F80032-1 | ADAPTER - WRENCH, MAIN GEAR SHOCK STRUT ORIFICE PLATE | 7 | |
| F80176-1 | TORQUE WRENCH ADAPTER - MAIN LANDING GEAR TRUNNION, AFT BEARING NUT | 5 | |
| F80176-8 | Torque Wrench Adapter -Main Landing Gear Trunnion. Aft Bearing Nut | 16 | |
| F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 16 | |
| FDOO01D23654000 | ADAPTER FOR DOUBLE WHEEL NOSE GEAR | 1 | |
| FGFB932303 | ADAPTER FOR NOSE LANDING GEAR WHEEL REMOVAL/INSTALLATION | 1 | |
| FGFB932304 | ADAPTER FOR MAIN LANDING GEAR WHEELS REMOVAL/INSTALLATION | 1 | |
| FMGJA | Falcon Stainless Main Gear Jack Adapter | 1 | |
| FMGJA-100 | Main Gear Axle Jack Adapter | 1 | |
| FNGJA | Nose Gear Axle Jack Adapter | 1 | |
| FXT-13759 | GEARBOX VENT PRESSURE ADAPTER | 1 | |
| G1003200048-001 | LANDING GEAR MANUAL RELEASE HANDLE ADAPTER | 1 | |
| G215-070019-11 | JACK ADAPTERS LANDING GEAR | 1 | |
| G27034 | SPLINE ADAPTER -0 ANGLE GEARBOX DRIVE, INBD TE | 1 | |
| G27034-1 | SPLINE ADAPTER - ANGLE GEARBOX DRIVE, INBOARD TRAILING EDGE FLAP | 1 | |
| G27091-1 | SPLINE ADAPTERS - ANGLE GEARBOX DRIVE, INBOARD AND OUTBOARD TRAILING EDGE FLAPS | 5 | |
| G32011-1 | WRENCH ADAPTER - OVERSIZE GLAND NUT, WING AND BODY GEAR | 6 | |
| G32037 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 1 | |
| G32060-1 | Torque adapter-rod end，body landing gear，hydraulic actuator | 2 | |
| GS20865-1 | ADAPTER, INTERFACE 14RF CONTROL TO ENGINE & GEARBOX | 1 | |
| GS21144-1 | TORQUE ADAPTER, GEARBOX PROPELLER | 4 | |
| GSE0700033 | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| H46828 | NOSE LANDING GEAR WHEEL AXLE NUT ADAPTER | 19 | |
| H46831 | ADAPTER NOSE GEAR | 11 | |
| H46838 | MAIN LANDING GEAR WHEEL AXLE NUT ADAPTER | 14 | |
| H47786 | FALCON STAINLESS MAIN GEAR JACK ADAPTER | 1 | |
| HA-23005426 | GUIDE Ã?? SPUR ADAPTER, GEAR SHAFT | 1 | |
| HC1321H0071-000 | SLING ADAPTER MAIN GEAR | 1 | |
| HC132H0071-000 | SLING ADAPTER MAIN GEAR | 5 | |
| HP-6000-1 | H150 LIFT ADAPTER - B206A/B - HIGH GEAR | 1 | |
| HP-6000-10 | H150 LIFT ADAPTER - B47 - STD GEAR | 1 | |
| HP-6000-12 | H200/250 LIFT ADAPTER - H135/EC135 - LOW GEAR | 1 | |
| HP-6000-13 | H200/250 LIFT ADAPTER - H135/EC135 - HIGH GEAR | 1 | |
| HP-6000-14 | H150 LIFT ADAPTER - B206L/407 - HIGH GEAR - B407 FLOAT COMP. | 1 | |
| HP-6000-15 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR | 1 | |
| HP-6000-17 | H200/250 LIFT ADAPTER - B427 - LOW GEAR W/O CABLE CUTTERS | 1 | |
| HP-6000-18 | H200/250 LIFT ADAPTER - B427 - HIGH GEAR | 1 | |
| HP-6000-19 | H200/250 LIFT ADAPTER - B206A/B - HIGH GEAR | 1 | |
| HP-6000-2 | H150 LIFT ADAPTER - B206A/B - LOW GEAR | 1 | |
| HP-6000-21 | H150 LIFT ADAPTER - H125/AS350 - HIGH GEAR | 1 | |
| HP-6000-22 | H150 LIFT ADAPTER - H125/AS350 - LOW GEAR | 1 | |
| HP-6000-26 | H200/250 LIFT ADAPTER - B206L/407 - HIGH GEAR - B407 FLOAT COMP. | 1 | |
| HP-6000-27 | H200/250 LIFT ADAPTER - H125/AS350/AS355 - LOW GEAR | 1 | |
| HP-6000-28 | H150/200/250 LIFT ADAPTER - OH-58 - HIGH GEAR | 1 | |
| HP-6000-29 | H150 LIFT ADAPTER - B206L - LOW GEAR | 1 | |
| HP-6000-36 | H150 LIFT ADAPTER - OH-58 - LOW GEAR | 1 | |
| HP-6000-37 | H200/250 LIFT ADAPTER - H125/AS350/AS355 - HIGH GEAR | 1 | |
| HP-6000-40 | H150/200/250 LIFT ADAPTER - B407 - LOW GEAR W/ FAIRING | 1 | |
| HP-6000-41 | H250 LIFT ADAPTER - UH-1H - LOW GEAR | 1 | |
| HP-6000-44 | H250 LIFT ADAPTER - UH-1H - HIGH GEAR | 1 | |
| HP-6000-48 | H200/250 LIFT ADAPTER - B206L - LOW GEAR | 1 | |
| HP-6000-58D | H200 LIFT ADAPTER - OH-58D - HIGH GEAR | 1 | |
| HP-6000-61 | H150 LIFT ADAPTER - B47 - HIGH GEAR | 1 | |
| HP-6000-62 | H200/250 LIFT ADAPTER - H135/EC135 - MID GEAR (METRO) | 1 | |
| HP-6000-75 | H150 LIFT ADAPTER - B505 - STD GEAR | 1 | |
| HP-6000-78 | H150 LIFT ADAPTER - B505 - HIGH GEAR | 1 | |
| HU55181 | SPRUNG ADAPTER-R I EXTERNAL GEARBOX MODU | 1 | |
| HU55181-1 | SPRUNG ADAPTER-R I EXTERNAL GEARBOX MODULE | 6 | |
| HU55330-1 | ADAPTER - SUPPORT GEARBOX CRADLE. | 8 | |
| HU55989 | PLATE ADAPTER - R I GEARBOX UNITS | 5 | |
| HU56211-4 | ADAPTER GEARBOX CRADLE TO JACK | 1 | |
| HU56213 | GEARBOX ADAPTER | 1 | |
| HU56213-3 | GEARBOX ADAPTER | 1 | |
| HU56214 | ADAPTER, GEARBOX ACCESSORIES | 1 | |
| HU56215 | ADAPTER-FIXTURE ON GEARBOX TROLLEY | 1 | |
| IAE1F10023 | ADAPTER HANDLING-GEARBOX | 8 | |
| IAE1J12119 | ADAPTER EXTENSION INTERNAL GEARBOX AND BEARING SUPPORT ASSY INTERMEDIATE | 1 | |
| J12007-1 | ADAPTER - NOSE LANDING GEAR STRUT SERVICING | 6 | |
| J12007-2 | ADAPTER - NOSE LANDING GEAR STRUT SERVICING | 2 | |
| J32025-29 | Adapter - Hoist, Nose Landing Gear Drag Strut | 4 | |
| J32032 | ADAPTER ASSEMBLY WRENCH - LANDING GEAR WHEEL RETAINING NUT | 4 | |
| J32032-19 | ADAPTER ASSEMBLY WRENCH - LANDING GEAR WHEEL RETAINING NUT | 9 | |
| J32032-22 | ADAPTER ASSEMBLY WRENCH - LANDING GEAR WHEEL RETAINING NUT | 23 | |
| J32055-01 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | 1 | |
| J32055-03 | TORQUE ADAPTER SET -0 LANDING GEAR COMPONENTS | 1 | |
| J32055-1 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 5 | |
| J32055-3 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 6 | |
| J32055-50 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 9 | |
| J32055-61 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 7 | |
| J32055-81 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 4 | |
| J32055-82 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 2 | |
| J32055-97 | TORQUE ADAPTER SET - LANDING GEAR COMPONENTS | 1 | |
| K-2728 | Nose Gear Axle Jack Adapter | 1 | |
| K-2730 | MAIN GEAR AXLE JACK ADAPTER (02-7833-0110) | 1 | |
| K-2730 (02-7833-0110) | Main Gear Axle Jack Adapter (02-7833-0110) | 1 | |
| K27002 | ADAPTER - TRAILING EDGE GEARED ROTARY ACTUATOR | 1 | |
| K27002-1 | Adapter - TE Flap Geared Rotary Actuator, Removal | 1 | |
| K27002-83 | ADAPTER EQUIPMENT - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL/INSTALLATION (CE) | 1 | |
| K27002-83 upgrade to K27002-85 | Adapter eqpt-te geared rotary actuator，removal/installation | 1 | |
| K27002-85 | ADAPTER EQUIPMENT - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL/INSTALLATION (CE) | 9 | |
| K27002-97 | ADAPTER - TRAILING EDGE GEARED ROTARY ACTUATOR, REMOVAL / INSTALLATION | 1 | |
| K32006-1 | HOIST ADAPTER EQUIPMENT - NOSE LANDING GEAR DRAG BRACE REMOVAL/INSTALLATION (CE) | 7 | |
| K32034-1 | TORQUE ADAPTER - ELECTRICAL BRAKE ACTUATOR CONNECTOR, MAIN LANDING GEAR | 9 | |
| LX-1418 I/W B411 | ADAPTER – RUBBER TIPPED AND MAIN LANDING GEAR | 1 | |
| MIT65B01201 | WRENCH ADAPTER - GLAND NUT, WING AND BODY GEAR | 7 | |
| MIT65B01202-1 | ADAPTER ASSEMBLY WRENCH - LANDING GEAR WHEEL RETAINING NUT | 11 | |
| MIT65B01218 | TORQUE ADAPTER - DRAG BRACE ASSEMBLY, WING LANDING GEAR | 5 | |
| MIT65B01500 | TORQUE ADAPTER - NOSE LANDING GEAR RETRACT ACTUATOR | 2 | |
| MIT65B01502 | TORQUE ADAPTER - BODY LANDING GEAR RETRACT ACTUATOR | 1 | |
| MIT65B01503 | ADAPTER - TORQUE WRENCH, ACTUATOR ASSEMBLY, NOSE GEAR STEERING | 1 | |
| MIT65B01504 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, BODY LANDING GEAR | 3 | |
| MIT65B01539 | TORQUE WRENCH ADAPTER - TRUCK POSITIONING ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B01540 | TORQUE WRENCH ADAPTER - DOWNLOCK ACTUATOR, MAIN LANDING GEAR | 2 | |
| MIT65B01570 | TORQUE ADAPTER - RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| MIT65B05124 | TORQUE ADAPTER - END CAP, LOWER TRIPOD PIN NOSE LANDING GEAR | 1 | |
| MIT65B08802-1 | TORQUE WRENCH ADAPTER - BUNGEE DOWNLOCK, JURY STRUT, BODY LANDING GEAR | 1 | |
| MIT65B80934 | SPANNER ADAPTER - GEARBOX ASSEMBLY, OUTBOARD AILERON LOCKOUT | 1 | |
| MIT65B81276 | TORQUE WRENCH ADAPTER - NOSE LANDING GEAR | 1 | |
| MIT65B82568 | ADAPTER - PRESSURE RELIEF VALVE, RETRACT ACTUATOR, WING LANDING GEAR | 2 | |
| NLGFA320 | ADAPTER KIT NOSE LANDING GEAR | 1 | |
| PC-1067 | LANDING GEAR STRUT CHARGING ADAPTER | 9 | |
| PF53481-9P | CART, SERVICE - LANDING GEAR STRUT (5 GAL CAPACITY WITH HANDPUMP, HOSE, AND GRAVITY FILL ADAPTER) (MALABAR INTERNATIONAL) | 6 | |
| PRESSURE REGULATOR, 0 - 5 PSI | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| PWA 102830 | ADAPTER - ANGLE GEARBOX | 1 | |
| PWA 115650 | GEARBOX DRAIN PLUG ADAPTER | 1 | |
| PWA 27251 | ADAPTER MAIN GEARBOX BEARING OIL NOZZLES | 2 | |
| PWA 83101 | ADAPTER - TORQUE, GEARBOX OIL LUBE AND SCAVENGE COVER | 3 | |
| PWA-115650 | GEARBOX DRAIN PLUG ADAPTER | 1 | |
| PWA101181 | ADAPTER HOLDING-MAIN GEARBOX | 1 | |
| PWA102830 | ADAPTER - ANGLE GEARBOX | 1 | |
| PWA10408 | Adapter (Gearbox Installed) | 6 | |
| PWA107032 | ADAPTER-MAIN GEARBOX VFG DRIVE OIL SEAL | 1 | |
| PWA115650 | GEARBOX DRAIN PLUG ADAPTER | 1 | |
| PWA12292 | Puller PWA 102987 Adapter (Gearbox Installed) | 5 | |
| PWA211305 | ADAPTER HANDLING - MAIN GEARBOX ASSEMBLY | 2 | |
| PWA211413 | ANTI-TORQUE ADAPTER - REMOVAL OF THE ANGLE GEARBOX | 1 | |
| PWA212369 | TORQUE ADAPTER (LP35)- ANGLE GEARBOX | 3 | |
| PWA27218 | ADAPTER GEAR BOX | 1 | |
| PWA27250 | ADAPTER - GEAR BOX NOZZLE OIL FLOW | 2 | |
| PWA27251 | ADAPTER - OIL FLOW, GEARBOX NOZZLE_[PWA27251] | 2 | |
| PWA45268 | Adapter (Gearbox Removed) | 1 | |
| PWA45270 | Adapter (Gearbox Removed) | 1 | |
| PWA80156 | ADAPTER PULLER GEARBOX SEAL ROTATING RING REMOVAL HYD PUMPS FP/FB | 1 | |
| PWA80157 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL IDGS | 1 | |
| PWA80158 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL STARTER | 1 | |
| PWA80222 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING DEOILER | 1 | |
| PWA80574 | ADAPTER - HANDLING, MAIN GEARBOX - PW2000 ENGINES | 1 | |
| PWA80822 | ADAPTER GEARBOX OIL SYSTEM LEAK TEST | 1 | |
| PWA81405 | ADAPTER GEARBOX OIL SYSTEM LEAK TEST | 1 | |
| PWA85498 | ADAPTER,VACUUM CHECK-GEARBOX DEOILER OUTLET | 1 | |
| PWA85845 | ADAPTER-VACUUM CHECK-ENGINE ASSEMBLY GEARBOX | 1 | |
| PWA88112 | ADAPTER, VACUUM CHECK - GEARBOX BREATHER | 1 | |
| PWC37111 | Adapter, Reduction Gearbox to Stand | 2 | |
| PWC37501 | Adapter, Reduction Gearbox, Lifting | 1 | |
| PWC37825 | ADAPTER, REDUCTION GEARBXOR | 3 | |
| PWC37825D | ADAPTER, REDUCTION GEARBXOR | 1 | |
| PWC38001 | ADAPTER REDUCTION GEARBOX | 5 | |
| PWC40580 | Adapter-SPLINE,GEARSHAFT | 1 | |
| PWC42118 | Adapter Idler gear | 1 | |
| PWC50028 | Adapter Gearshaft | 1 | |
| PWC50054 | ENGINE COMBINING GEARBOX, OUTPUT ADAPTER REMOVAL & INSTALLATION | 5 | |
| PWC50216 | ADAPTER, FLOW, REDUCTION GEARBOX COVER | 1 | |
| PWC50962 | Adapter Reduction gearbox pres. Wash | 1 | |
| PWC54386 | ADAPTER, MEASURING, OIL PUMP GEARSHAFT BACKLASH | 1 | |
| PWC56870 | ADAPTER, REDUCTION GEARBOX, LIFTING | 1 | |
| PWC56871 | ADAPTER REDUCTION GEARBOX LIFTING | 5 | |
| PWC61059 | Adapter,Gearshaft | 3 | |
| PWC70336 | ADAPTER-GEARSHAFT | 1 | |
| RB23005426 | Guide - Spur Adapter Gearshaft C-30 | 2 | |
| RB23006778 | Guide Bearing Spur Adapter Gearshaft C-20 | 2 | |
| RB23006785 | Spur Adapter Gear Install Tool | 2 | |
| RB6798984 | Front & Rear Reduction Gear Housing Adapter | 2 | |
| RB6851348 | Gear Box Adapter | 2 | |
| RB6893369 | Mounting Gear Box Vibration Pickup Adapter | 2 | |
| RB6893501 | Drift-Spur Adapter Gearshaft | 2 | |
| RBA6300-80906 | Wrench Adapter, Landing Gear Damper | 2 | |
| RBE1X25-170-023 | Main Gear Box Adapter | 2 | |
| RBE332A91-4105-02 | Jack Adapter Pad, Main Landing Gear, Tool | 2 | |
| RBE332A91-4200-00 | JACK ADAPTER PAD NOSE GEAR | 2 | |
| RBE332A91-4205-00 | JACK ADAPTER PAD NOSE GEAR | 1 | |
| RBT18582 | Tail Rotor Gear Box Torque Adapter | 2 | |
| RBW109-3501-08-115 | Adapter, Landing Gear Shockstruts Nitrogen Change | 3 | |
| RBW6305G10931-3G | Adapter, Main Gear Box Upper Fitting Removal | 1 | |
| RBW6505G00831-3G | Tail Rotor Gear Box Support Trolley Adapter | 2 | |
| SPL-11076 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 1 | |
| ST2580-263 | ADAPTER - TORQUE, WING LANDING GEAR RETRACT ACTUATOR SPACER NUT SPL-5286 | 8 | |
| TB3020G401 | GEARBOX ASSEMBLY ADAPTERS | 1 | |
| TMHDI16-21-00 | ADAPTER FOR LANDING GEAR SERVICE TOOL | 1 | |
| TMHNA01-00-00 | NOSE LANDING GEAR JACK ADAPTER | 9 | |
| TMHNA10-00-00 | ADAPTER, NOSE LANDING GEAR | 1 | |
| TMHRA11-01-12 | ADAPTER FOR LANDING GEAR SERVICE TOOL | 3 | |
| TMHRA11-08-67 | ADAPTER FOR LANDING GEAR SERVICE TOOL | 1 | |
| VQCT118256-1 | ADAPTER, ROTATE TOOL, GG8 GEARBOX | 1 | |
| Z-2639 | Lear Main Gear Axle Jack Adapter | 4 | |
| Z-2641 | Lear Nose Gear Axle Jack Adapter | 2 | |
| Z-3275 | NOSE GEAR JACK ADAPTER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
