| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| C32032-138 | AXLE P | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 200910-CA | AXLE JACK-NLG-MLG Same as P/N TMHCP13-00-00 | 1 | |
| (CALIB) 9719-010 | Axle Jack, Hand carry type (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) 98S32005007200 | MAIN WHEEL AXLE PROTECTOR | 1 | |
| (CALIB) C32032-98 | Puller Eqpt - Axle/Brake Sleeve MLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) G32007-1 | Protector-Axle, Wing and Body Landing Gear (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) GSE55923 | SPANNER SPANNER, AXLE NUT - WLG AND BLG (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) H46838 | MLG WHEEL AXLE ADPTR | 1 | |
| (CALIB) J07013-1 | JACKING EQPT MLG AXLE (CALIBRATION) (CALIBRATION) | 1 | |
| (CALIB) J47548-1 | AXLE PROTECTOR A320/A321 (CALIBRATION) | 1 | |
| (CALIB) SCA65-1AP | 65 TON AIR OPERATED AXLE JACK (CALIBRATION) | 1 | |
| 00-540-2343 | 5 TON AXLE JACK - TYPE A5 | 1 | |
| 00411-003-000 | COPPER GASKET (FOR USE WITH RH1029A1A0A01 AXLE JACK) | 1 | |
| 00489-284-006 | CYLINDER PIN, HARDENED (MANUAL RT9050-001 AXLE JACK | 1 | |
| 006C1200 | AXLE JACK (5 EACH AXLE JACK PN: 006C1200) | 1 | |
| 0152.00 | JACK AIRPLANE AXLES | 3 | |
| 01472 | SEAL KIT FOR J-AXLE12HPA (CONTAINING: SPRING, VALVE AND BALL) | 1 | |
| 02-4950-4000 | Strut Support, Axle Adaptr | 4 | |
| 02-7813-0100 | JACK - NLG AXLE TIRE CHANGING (12 TONS (10 886 KG)) (OPTIONAL EQUIPMENT) | 9 | |
| 02-7813C0100 | SLIPPER JACK AXLE | 23 | |
| 02-7813C0100-A5 | Axle Jack - 12 Ton (Ce) - Without Spacer Blocks | 3 | |
| 02-7818-0100 | AXLE JACK LOW PROFILE 12 TON | 1 | |
| 02-7818C0110 | AXLE JACK LOW PROFILE 12 TON | 8 | |
| 02-7818C0110 | JACK, AXLE W/ADPTR MN-NOSE | 8 | |
| 02-7825-0110 | 20 TON LOW PROFILE AXLE JACK | 1 | |
| 02-7829C0100 | Tronair 02-7829C0100 Blue 20-Ton Telescoping Hydraulic Axle Jack (CE) | 1 | |
| 02-7830C00110 | 25 TON LOW PROFILE AXLE JACK | 1 | |
| 02-7830C0110 | 25 TON LOW PROFILE AXLE JACK | 10 | |
| 02-7833C0110 | Tronair 02-7833C0110 Blue 12-Ton Hydraulic Axle Jack with MainNose Gear Adapters (CE) | 3 | |
| 02-7835C0100 | TRONAIR Main and Nose Axle Jack, 22.5 in L x 4.5 in W, 25 ton Capacity, Steel, 8.36 in | 7 | |
| 02-7852C0100 | Jack, 12 Ton Axle (Ce) - Phenom 300, PC-9, T-6A Texan II | 6 | |
| 02-7854C0110 | JACK: AXLE,HYD,12&25TON, | 11 | |
| 02-7861C0100 | TRONAIR Nose Axle Jack, 15.5 in L x 4.5 in W, 12 ton Capacity, Steel, 4 in, Blue | 7 | |
| 02-7862C0100 | AXLE JACK - 12 TON CAPACITY | 5 | |
| 02-7863C0100 | 12 Ton Axle Jack (Ce) - Challenger 300/350, P-180, Legacy 450, 500 | 8 | |
| 02-7933C0100 | Tronair 02-7933C0100 Pilatus PC-12Dornier 228-100200 5-Ton Hydraulic Axle Jack (CE) | 3 | |
| 02A7898C0100 | Jack, Axle 3 Stage 5 Ton With Air Pump (CE) | 4 | |
| 02−7813C0100 | Jack − Nose Gear Axle (12 tons (10886 KG)) (Optional) | 23 | |
| 02−7813−0100 | Jack − Nose Gear Axle (12 Tons (10886 Kg)) (Optional) | 9 | |
| 02−7854C0110 | JACK AXLE - NLG/MLG COMBINED TIRE CHANGING (DUAL 12/25 TONS (10 886/22 680 KG)) (ALTERNATE PART NUMBER) | 11 | |
| 0301040280 | ANTICIPATOR PULLEY AXLE | 1 | |
| 0301040290 | ANTICIPATOR AXLE | 1 | |
| 0489-284-000 | SEATED VALVE (MANUAL RT9050-001 AXLE JACK , PART LIST) | 1 | |
| 0489-285-000 | RELEASE VALVE (MANUAL RT9050-001 AXLE JACK , PART LIST) | 1 | |
| 1008-50 | JACK - AXLE, NLG - 10 TON CAPACITY - 8" MINIMUM HT., 13" LIFT, 4" SCREW EXTENSION, 25 TOTAL HT | 1 | |
| 1062-50 | Langa 1062-50 Axle Jack, Ramp and Hangar 100 Ton | 3 | |
| 1062.50 | 1062-50 AXLE JACK, RAMP AND HANGAR 100 TON | 3 | |
| 1062.90 | AXLE JACK RAMP & HANGAR 90T | 1 | |
| 10629 | AXLE JACK RAMP & HANGAR 90T | 1 | |
| 1063-50 | Langa 1063-50 Axle Jack, Ramp and Hangar 65 Ton | 3 | |
| 1063.50 | 1063-50 AXLE JACK, RAMP AND HANGAR 65 TON | 3 | |
| 1065-50 | Langa 1065-50 Axle Jack, Ramp and Hangar 150 Ton | 2 | |
| 1069.50 | RH AXLE JACK TRANSPORT CART | 1 | |
| 1077-1100 | JACK - AXLE, SINGLE ACTING CYLINDER, ALLIGATOR TYPE, 50 TON | 3 | |
| 10TAXLE-JACK | AXLE JACK WITH HAND PUMP 45T (A320/A330) | 1 | |
| 114 | PROTECTR-MLG BRAKE AXLE | 1 | |
| 1069.00 | RH AXLE JACK TRANSPORT CART | 1 | |
| 114-1344 | TOOL FOR MEASURE INNER DIAMETER OF AXLE BUSHINGS IN THE TORQUE PLATE ASSEMBLY AND THE PISTON HOUSING | 1 | |
| 114-1412 | AXLE THREAD PROTECTOR | 1 | |
| 114-1414 | PROTECTOR-MLG BRAKE AXLE | 1 | |
| 114-756 | AXLE SPACER | 1 | |
| 1141-1100 | 15 TON AXLE WEIGHING JACK NEW EQUIPMENT | 1 | |
| 1159GSE40104 | AXLE THREAD PROTECTOR G450 KIT | 1 | |
| 1159GSE40214-7 | AXLE JACK ADAPTER | 2 | |
| 1159GSE50104-1 | AXLE PROTECTORS KIT | 3 | |
| 1159GSE50126-13 | MLG AXLE THREAD PROTECTOR | 1 | |
| 1159GSE50214 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 1159GSE50214-1 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 1159GSE50214-3 | AXLE JACK ADAPTER | 4 | |
| 1159GSEM50126-13 | MAIN LANDING GEAR AXLE THREAD PROTECTOR | 2 | |
| 1159GSEP40100-11 | AXLE PROTECTOR-MAIN LANDING GR / GIV, G300, G350, G400, G450 | 2 | |
| 1159GSEP40100-13 | AXLE PROTECTOR-NOSE LANDING GR - GIV, G300, G350, G400, G450 | 2 | |
| 1159GSEP50100-11 | Axle Protector | 2 | |
| 1159GSEP50101-11 | GV NOSE GEAR AXLE PROTECTOR | 2 | |
| 1159GSP50101-11 | GV NOSE GERAR AXLE PROTECTOR | 1 | |
| 1159GSS50104-1 | GV SERIES AXLE PROTERCTORS KIT | 1 | |
| 1159SEL40001-1 | MLG AXLE THREAD PROTECTOR | 2 | |
| 1159SEM30001-11 | AXLE JACK ADAPTER | 1 | |
| 1159SEM30001-17 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 1159SEM30001-9 | MAIN GEAR AXLE JACK PAD | 1 | |
| 1172-1100 | JACK - AXLE, FLYAWAY - 99 TON CAPACITY | 2 | |
| 1387 | AIR OPERATED AXLE JACK | 1 | |
| 1387-50 | Langa 1387-50 Axle Jack, Ramp and Hangar, 41 Ton | 3 | |
| 1387.5 | JACK AIRPLANE AXLES | 1 | |
| 14-6868-6000 | Protector, Mlg Axle Thread | 8 | |
| 14-6868−6000 | MLG AXLE PROTECTIVE COVER | 8 | |
| 14630 | AXLE EQUIPPED | 1 | |
| 144009 | AC60-LP AXLE | 1 | |
| 14–6868–6000 | MLG AXLE PROTECTIVE COVER | 8 | |
| 14−6868−6000 | MLG AXLE PROTECTIVE COVER | 8 | |
| 1504-50 | HAND CSVY AXLE JACK 15 TON CAPACITY | 1 | |
| 15048-000-000 | LOW-PRESSURE PUMP, MANUAL RC4509A1A0A10 AXLE JACK | 1 | |
| 15049-000-000 | HIGH-PRESSURE PUMP (MANUAL RC4509A1A0A10 AXLE JACK | 1 | |
| 150D1100/-56 | AIR OPERATED AXLE JACK | 2 | |
| 15187-000-000 | HIGH-PRESSURE PUMP (MANUAL RT9050-001 AXLE JACK | 1 | |
| 1542.00 | JACK TESTER KIT FOR TRIPOD AND AXLE JACKS | 1 | |
| 159GSE50214-3 | MAIN GEAR AXLE JACK ADAPTER | 1 | |
| 15PRE65800161 | MLG AXLE PROTECTOR | 1 | |
| 15PRE65B00161 | PROTECTOR - AXLE, WING AND BODY LANDING GEAR | 9 | |
| 165P10AR | RETRACT AXLE JACK IS A 165 TON CAPACITY | 1 | |
| 1697.50 | AXLE JACKS WITH AIR PUMP | 3 | |
| 1704−50 | JACK - AXLE, MLG COLUMBUS JACK CORP* | 1 | |
| 17231-002-003 | PISTON II FOR HYDRAUIC AXLE | 1 | |
| 17PRE65B00161 | THREAD PROTECTOR - AXLE, MAIN AND NOSE LANDING GEAR | 5 | |
| 17PRE65B00161-1 | AXLE PROTECTOR | 1 | |
| 1922 | SOCKET AXLE NUT (SPX OTC DIVISION) | 24 | |
| 196-T0046- 003 | PROTECTOR,AXLE THREAD - NLG | 1 | |
| 196-T0046-001 | PROTECTOR, AXLE THREAD - NLG | 1 | |
| 196-T0046-003 | PROTECTOR, AXLE THREAD - NLG | 1 | |
| 196-T0046-003S | PROTECTOR, AXLE THREAD - NLG | 1 | |
| 196-T0112- 003 | PROTECTOR,THREAD,WHEEL AXLE - MLG | 1 | |
| 196-T0112-001 | PROTECTOR, AXLE THREAD - MLG | 1 | |
| 196-T0112-003 | PROTECTOR,THREAD,WHEEL AXLE - MLG | 1 | |
| 196-T0112-003S | PROTECTOR, AXLE THREAD - MLG | 1 | |
| 196-T0128-401 | PROTECTOR, WHEEL AXLE - MLG | 1 | |
| 198T06449-00 | AXLE NUT SOCKET (MLG): 198T06449-0016-POINT SOCKET, SIZE 4 ¾ INCH- 32-49- 05-400-801-A | 1 | |
| 198T06449-001 | SOCKET, NLG AXLE NUT (2 3/4 INC SOCKET, 6 POINT) | 1 | |
| 2001522 | F-16 Fighter Jet Towbar: Specifically designed to tow the Lockheed F-16. Consists of an TB125-2R 20' and head assembly.*The wheels can be positioned on the tow bar tube so the head pins are at the axle height when the front caster wheels are on the groun | 1 | |
| 2012183 | 12-Ton Axle Jack. Dual stage hydraulic and mechanical extension. Manual hand pump operations. All steel construcion and uses 5606 hydraulic fluid. 1" and 2" spacers included. CE Certified. | 1 | |
| 2012184 | 25-Ton Axle Jack. Dual stage hydraulic and mechanical extension. Manual hand pump operations. All steel construcion and uses 5606 hydraulic fluid. 1" and 2" spacers | 1 | |
| 2012186 | 12 & 25 ton Axle Jack. Multiple Application Jack. See specification sheet for more details. | 1 | |
| 2020692 | 35 Ton Axle Jack. 35 ton capacity (31.75 metric ton) and is capable of 11 inches (28 cm) of lift. Our series of axle jacks is available in various configurations, with 12 and 25-ton capacity units available. These hydraulic lifting jacks feature steel con | 1 | |
| 21-50665 | NLG AXLE NUT ADAPTER | 1 | |
| 2265-10 PR | AIR OPERATED AXLE JACK | 3 | |
| 2265-10PR | 65 Ton Axle Jack - Alligator - 10 inches up to 26 inches | 3 | |
| 2295-10PR | 95 Ton Axle Jack - Alligator - 10 inches up to 26 inches | 4 | |
| 2310-T004-401 | DEDEVICE, PHENOM AXLE JACK ADAPTER | 1 | |
| 2315T381 | WATER RESISTANT PHENOLIC WHEEL WITH ROLLER BERING, 6" DIAMETER X2" WIDE, FOR 1/2" AXLE | 1 | |
| 2370-T158-401 | NLG AXLE HEAD PROTECTOR | 11 | |
| 2370-T160-001 | AXLE SPLINER UNLKG GSE | 3 | |
| 2370-t158-401 | PROTECTOR, NLG AXLE( | 11 | |
| 2370T158-401 | PROTECTOR NLG AXLE THREAD | 11 | |
| 2370‐T158‐401 | Nlg Axle Thread Protector | 11 | |
| 245400-78 | SLEEVE - WHEEL AXLE PROTECTION | 1 | |
| 245400/78 | SLEEVE - WHEEL AXLE PROTECTION | 1 | |
| 3115 | LOW PROFILE AXLE JACK, 25 TON | 1 | |
| 46014 | SPANNER-AXLE NUT, NLG | 1 | |
| 51102 | AXLE STAND 2Ton (2 PCS) | 1 | |
| 51103 | AXLE STAND 3Ton (2 PCS) | 1 | |
| 51104 | AXLE STAND 6Ton (2 PCS) | 1 | |
| 53232.00 | Mlg Axle Thread Protector E-170 | 1 | |
| 300335 | SPL-1876, PROTECTOR - THREAD & AXLE, MLG | 1 | |
| 340713 | PROTECTOR MLG AXLE THREAD | 3 | |
| 340714 | PROTECTOR MLG AXLE THREAD | 2 | |
| 2558595 | AXLE PROTECTOR | 3 | |
| 2558757 | PROTECTOR AXLE MLG | 17 | |
| 2558758 | BRAKE CHANGE AXLE & THREAD PROTECTOR | 16 | |
| 2558898 | AXLE PROTECTOR - BRAKE | 2 | |
| 2560809 | PROTECTOR, AXLE - WHEEL WLG AND BLG | 1 | |
| 2560809-2 | PROTECTOR, AXLE - WHEEL WLG AND BLG | 2 | |
| 25Y239A | AXLE NUT SPANNER | 6 | |
| 25Y249A/B | SPANNER, AXLE ASSY | 7 | |
| 25Y249AB | SPANNER, AXLE ASSY | 7 | |
| 28-0-1380 | Torque Adapter- Nose Wheel Axle Nuts | 5 | |
| 28-0-1380D | ADAPTOR-NOSE WHEEL AXLE NUT TORQUE | 3 | |
| 28-0-1380E | ADAPTER NOSE WHEEL AXLE NUT TORQUE | 6 | |
| 28-0-1380F | ADAPTER, NLG AXLE NUT | 4 | |
| 28-0-1381C | ADAPTOR-MAIN WHEEL AXLE NUT TORQUE | 3 | |
| 28-0-3180F | ADAPTER, NLG AXLE NUT | 1 | |
| 28-0-5217 | PROTECTION MLG WHEEL AXLE | 2 | |
| 2MIT65B01214-1 | ALIGNMENT PIN - AXLE, TRUCK BEAM, MAIN LANDING GEAR | 1 | |
| 2PRE65B00161-1 | MLG AXLE THREAD PROTECTOR - B747 | 3 | |
| 32022-20 | AXLE THREAD PROTECTOR | 1 | |
| 32025-1 | WRENCH ADAPTER AXLE NUT NLG | 1 | |
| 3401504-1 | NOSE GEAR JACK PAD AXLE | 1 | |
| 3507-56FT | 35 Ton Axle Jack - Fly-A-Way - 7 inches up to 22 inches | 3 | |
| 355A93-3443-00 | AXLE PULLER | 1 | |
| 390-810000/928 | MAIN GEAR AXLE ADAPTER FOR PREMIER 390 | 2 | |
| 3936857-3 | PROTECTOR-M/L/G AXLE SLEEVE | 1 | |
| 3936857-5 | PROTECTOR-M/L/G AXLE THREAD | 1 | |
| 3981305-1 | Adapter - MLG Axle Nut | 4 | |
| 3981306 | PULLER SLEEVE AXLE M | 1 | |
| 3981306-1 | 717 MLG Axle sleeve puller | 3 | |
| 3981306-4FAS | MLG AXLE SLEEVE PULLER | 1 | |
| 3981306-5 | MLG AXLE SLEEVE ASSY PULLER | 1 | |
| 3981312-1 | PROTECTOR AXLE | 4 | |
| 3MIT65B01216 | PULLER - SLEEVE AXLE ASSEMBLY, MAIN LANDING GEAR AND NOSE LANDING GEAR | 1 | |
| 3MIT65B05455-1 | ALIGNMENT PIN - AXLE, INNER CYLINDER, NOSE LANDING GEAR | 1 | |
| 4 3/4 IN. AXLE NUT SOCKET, 6 P | 4 3/4 IN. AXLE NUT SOCKET, 6 POINT | 1 | |
| 4,6E 08 | SPANNER-AXLE NUT, MLG | 1 | |
| 4115-0201W26 | NLG WHEEL AXLE PROTECTOR | 1 | |
| 4115-0201W28 | NLG WHEEL AXLE PROTECTOR | 1 | |
| 4124-0201W28 | NLG WHEEL AXLE THREAD PROTECTOR | 1 | |
| 4124-0201W28-S | NLG WHEEL AXLE THREAD PROTECTOR | 1 | |
| 4124-0201W28 | NLG AXLE THREAD PROTECTO | 1 | |
| 425-001 | AIR RELIEF VALVE-12/35 TON TRIPOD JACK PUMP (PART FOR 65P9AR AXLE JACK, 65T) | 1 | |
| 45A99147-001 | AXLE JACK ADAPTER (T-1) | 4 | |
| 4600070 | SPANNER-AXLE NUT, MLG | 1 | |
| 4916706 | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
| 4916768 | AXLE THREAD PROTECTOR | 1 | |
| 460004781 | Thread protector- main gear axle | 7 | |
| 460007011 | SPANNER-AXLE NUT, MLG | 27 | |
| 460007230 | ADAPTOR TORQUE MLG AXLE NUT | 29 | |
| 4309901280 | ADAPTER-NLG AXLE TRANSMISSION SPNUT | 1 | |
| 46750A | MLG WHEEL AXLE NUT ADPT ATR 72 | 1 | |
| 472-001 | PART FOR 65P9AR AXLE JACK, 65T | 1 | |
| 4916706 REV P | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
| 4916706-515 | MLG AXLE NUT TORQUE ADAPTER | 4 | |
| 4916706-519 | ADAPTER MLG AXLE NUT TORQUE | 2 | |
| 4916706-521 | Adapter-torque，main landing gear axle nut | 1 | |
| 4916706-527 | Adapter Torque MLG Axle Nut | 5 | |
| 4916706-529 | ADAPTER-TORQUE，MAIN LANDING GEAR AXLE NUT | 4 | |
| 4916706-531 | Adapter-torque，main landing gear axle nut | 2 | |
| 4916706529 | MLG AXLE TORGUE ADAPTER | 4 | |
| 4916768-1 | PROTECTOR AXLE NLG | 4 | |
| 4916768-501 | NLG AXLE PROTECTOR-MD82 | 11 | |
| 49I6706 | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
| 4PRE65B0016 | PROTECTOR -0 AXLE, NLG | 1 | |
| 4PRE65B00162 | PROTECTOR - AXLE NOSE LANDING GEAR | 12 | |
| 5004-55 | 50 Ton Axle Jack - Rhino - 4.0 inches up to 24.5 inches | 4 | |
| 5007-56 | 50 Ton Axle Jack - 7 inches up to 22.5 inches | 3 | |
| 5007-56FT | 50 Ton Axle Jack - Fly-A-Way - 7 inches up to 22 inches | 3 | |
| 5008-56 | 50 Ton Axle Jack - Alligator - 8.5 inches up to 24.25 inches | 3 | |
| 50P9AR | MALABAR 882100-1 AXLE JACK 50P9AR 50 TON | 5 | |
| 50P9ARPK | MALABAR AXLE JACK REPAIR KIT 50 TON | 2 | |
| 52232-0011 | MLG AXLE THREAD PROTECTOR | 1 | |
| 53232-001 | MLG AXLE THREAD PROTECTOR | 1 | |
| 53232-0011 | MLG AXLE THREAD PROTECTOR | 8 | |
| 53232‐0011 | Mlg Axle Thread Protector | 8 | |
| 533212167 | Axle Protector-Brake MLG/CLG | 1 | |
| 533213412 | THREAD PROTECTOT MLG AXLE | 1 | |
| 533213740 | SLEEVE PROTEC MLG AXLE BRKE CHANGE | 1 | |
| 533213783 | SLEEVE PROTEC MLG AXLE BRKE CHANGE | 1 | |
| 533222121 | ADAPTER - AXLE NUT NLG | 1 | |
| 533223742 | THREAD PROTECTOR NLG AXLE | 1 | |
| 53387-0011 | MLG AXLE THREAD PROTECTOR | 15 | |
| 53387-011 | MLG AXLE THREAD PROTECTOR | 1 | |
| 53D22004 | JACK - AXLE, NLG - 10 TON CAPACITY - 8" MINIMUM HT., 13" LIFT, 4" SCREW EXTENSION, 25 TOTAL HT | 2 | |
| 53D22020 | 5 TON AXLE JACK - TYPE A5 | 1 | |
| 545SD | JACK - AXLE 30 TON 2 STAGE AIR (PNEUMATIC CONTROL) | 1 | |
| 54665 | UNIVERSAL HOSE PX KIT FOR AXLE JACK , CONNECT A/C WHEEL & JACK BORE VLVFOR PNEUMATIC ASSITANCE FOR BIG & SMALL | 1 | |
| 5923-010 | JACK - AXLE - RHINO - CANTILEVER. 45 TON CAPACITY | 1 | |
| 5E91-0020 | PROTECTOR - AXLE THREAD | 2 | |
| 5E92-0300 | PROTECTOR-AXLE,MLG | 11 | |
| 6026-4101 | PROTECTOR - NLG AXLE | 4 | |
| 6026-4102 | PROTECTOR - NLG WHEEL AXLE | 7 | |
| 60G3210001A001 | MLG AXLE THREAD PROTECTOR | 3 | |
| 60G3210001M002 | MLG AXLE THREAD PROTECTOR | 2 | |
| 6260-0003 | SPANNER - NLG AXLE NUT | 7 | |
| 6260-003 | SPANNER NLG AXLE NUT | 3 | |
| 6263-6104 | MLG WHEEL AXLE THREAD PROTECTOR | 1 | |
| 6263-6104-S | MLG WHEEL AXLE THREAD PROTECTOR | 1 | |
| 6263-6104 | MLG AXLE THREAD PROTECTOR | 1 | |
| 6263A6600-01 | MLG WHEEL AXLE PROTECTOR | 1 | |
| 632A120-A | TOOL "NOSE LG WHEEL AXLE THREAD PROTECTIVE COVER" | 1 | |
| 632A160-A | MAIN LANDING GEAR AXLE THREAD PROTECTION SLEEVE | 1 | |
| 632A160-B | TOOL "PROTECTOR – WHEEL AXLE THREAD (MLG)" | 1 | |
| 64200S | AXLE JACK 10 TON CAPACITY 5 IN WIDTH 17 IN HEIGHT | 2 | |
| 642S | AXLE JACK NLG, CAPACITY 10 TON | 6 | |
| 6504-55 | 65 Ton Capacity - Rhino Axle Jack | 3 | |
| 6510-56FT | 65 Ton Axle Jack - Fly-A-Way - 10 inches up to 25 inches | 4 | |
| 65P10 | JACK - AXLE, 65 TON CAPACITY, 10.19 CLOSED HEIGHT, 11.0LIFT, 4.75 SCREW EXTENSION, 25.94 INCH EXTENDED HEIGHT | 5 | |
| 65P10AR | JACK AIRPLANE AXLES | 12 | |
| 65P10PK | AXLE JACK 65 TONS REPAIR KIT | 1 | |
| 65P9ARPK | PART FOR 65P9AR AXLE JACK, 65T | 1 | |
| 68D010003-1003 | AXLE JACK ADAPTER | 1 | |
| 8586 | KRIKO AXLE JACK 60 TON (PRECILEC) | 1 | |
| 8714 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 3 | |
| 8842 | JACK - AXLE, 45 TON CAPACITY, 7.0" CLOSED HEIGHT, 12.03" LIFT, 2.84" SCREW EXTENSION, 21.88" INCH EXTENDED HEIGHT, 7.0" (MALABAR INTERNATIONAL) | 4 | |
| 80320 | AXLE FOR MASTERGRIP 14" | 1 | |
| 80325 | AXLE FOR MASTERGRIP 10" | 1 | |
| 80569 | AXLE FOR MASTERGRIP 18" | 1 | |
| 81966 | AXLE FOR BIG OPENING ADJUSTABLE WRENCH 6" | 1 | |
| 880408 | CYLINDER/COLLAR ASSY FOR 95P10AR AXLE JACK | 1 | |
| 880416 | OUTER STOP RING FOR 95P10AR AXLE JACK | 1 | |
| 881700 | UNIVERSAL AXLE JACK TRANSPORTATION 50 TN | 1 | |
| 7700522 | PROTECTOR - AXLE THREAD (0B9R9) | 1 | |
| 69133000 | CUTTING WHEEL AXLE FOR PIPE CUTTER RAPID 1/8"-1.1/4" | 1 | |
| 69133001 | CUTTING WHEEL AXLE FOR PIPE CUTTER RAPID 1/8"-2" | 1 | |
| 69133002 | CUTTING WHEEL AXLE PIPE CUTTER KOMPAKT/MINI | 1 | |
| 69134000 | GUIDE ROLLER AXLE FOR PIPE CUTTER RAPID 1/8"-1.1/4" | 1 | |
| 69134001 | GUIDE ROLLER AXLE FOR PIPE CUTTER RAPID 1/8"-2" | 1 | |
| 715-1 | PRESSURE HOSE - MAIN WHEEL AXLE JACK - BOEING | 1 | |
| 7193-010 | JACK - AXLE, PORTABLE. 50 TON | 1 | |
| 72913-8 | AXLE PROTECTOR MLG | 1 | |
| 72P3212001N001PRC | AXLE THREAD PROTECTOR KIT (MAIN) | 1 | |
| 7PRE65B00161-1 | PROTECTOR,THREAD MLG AXLE | 3 | |
| 8398-012 | NLG & MLG AXLE JACK (ALLIGATOR 65 TON CAPACITY) | 1 | |
| 8429E | 150 TON AXLE & TRIPOD JACK TEST FIXTURE | 2 | |
| 856A3947P06 | Axle support | 1 | |
| 85P10ARPK | PART FOR 85P10AR AXLE JACK | 1 | |
| 8704-010 | PROTABLE AXLE JACK 35 TONS | 2 | |
| 8714PK | REPAIR KIT FOR AXLEJACK 8714 | 1 | |
| 874600-8 | AXLE JACK 65P10AR 65 TON | 2 | |
| 8782PK | CYLINDER ASSY-REPAIR PAERTS KIT - 35 TONS AXLE JACK | 1 | |
| 878400B-4 | TRANSPORT TRAILER FOR AXLE JACK, AIRCRAFT TIRES, WHEEL BRAKE CHANGER | 2 | |
| 8784B | TRANSPORT TRAILER FOR AXLE JACK, AIRCRAFT TIRES, WHEEL BRAKE CHANGER | 2 | |
| 881700A | AXLE JACK TRANSPORTER | 1 | |
| 8817A | AXLE JACK TRANSPORTER | 1 | |
| 882100-6 | AXLE JACK 50P9AR 50 TON | 2 | |
| 88550-8 | AXLE JACK 95P10AR 95 TON - LOW PRESSURE PUMP | 1 | |
| 885500-16 | AXLE JACK 95P10AR 95 TON | 2 | |
| 889900-8 | AXLE JACK 95 TONS (MUST BE ORDERED W/ REPAIR KIT) | 1 | |
| 8919 | JACK AIRPLANE AXLES | 4 | |
| 8919PK | 45 TONS FLY AWAY AXLE JACK REPAIR KIT | 1 | |
| 8920 | JACK - AXLE, PORTABLE. 85 TON | 2 | |
| 916-44-4.684 | BACKUP RING- FOR 50T AXLE JACK (REGENT) | 2 | |
| 916-45-3.568 | BACKUP RING- FOR 50T AXLE JACK (REGENT) | 1 | |
| 9293 | AXLE NUT SOCKET: PN 4852.3.4 (1" DRIVE, 2-3/4" SOCKET) WITH ADAPTOR PN 9293 (3/4" F – 1" M ADAPTOR) (NLG) 32-49-01-400-801-A | 1 | |
| 9332-011 | JACK - AXLE, PORTABLE. 85 TON | 1 | |
| 9344-010 | JACK-AXLE, CANRILEVER, RHINO TYPE JACK, CAPACITY:85TON, HEIGHT:4.5-19.0INCHES, WEIGHT:4100LB. | 1 | |
| 9346-010 | 25 TON LOW PROFILE AXLE JACK | 1 | |
| 9346-011 | LOW PROFILE AXLE JACK, 25 TON | 1 | |
| 9349-010 | JACK - AXLE, PORTABLE. 65 TON | 1 | |
| 9440-010 | JACK - AXLE - FLYAWAY, 50 TON CAPACITY | 2 | |
| 9473-010 | AXLE JACK (20 TON CAPACITY) | 3 | |
| 9504-55 | JACK-AXLE, CANRILEVER, RHINO TYPE JACK, CAPACITY:85TON, HEIGHT:4.5-19.0INCHES, WEIGHT:4100LB. | 1 | |
| 9510-56FT | 95 Ton Axle Jack - Fly-A-Way - 10 inches up to 26 inches | 3 | |
| 956A6019P47 | Push-out axle | 1 | |
| 95P10AR | AXLE JACK 95P10AR 95 TON - LOW PRESSURE PUMP | 4 | |
| 95P9ARPK | MALABAR AXLE JACK REPAIR KIT 95 TOIN | 1 | |
| 960007011 | MLG AXLE ADAPTER A330 | 1 | |
| 98A27407530150 | AXLE COMPLETE | 1 | |
| 98D32102000000 | PROTECTR PROTECTOR-AXLE | 2 | |
| 98D32403006200 | CONE-PROTECTIVE OR PROTECTOR, WHEEL AXLE | 14 | |
| 98D32403007200 | PROTECTOR,WHEEL AXLE | 21 | |
| 98D32403007200 (J47779) | PROTECTOR,WHEEL AXLE | 1 | |
| 98D71203501354 | AXLE (BOOTSTRAP KIT) | 6 | |
| 98F32104004-243 | BRAKE AXLES ADAPTOR | 1 | |
| 98F32104004243 | BRAKE AXLES ADAPTOR | 1 | |
| 98F32104004244 | Shells（Pair） axle | 1 | |
| 98F32301017000 | SPANNER AXLE LINK LH | 1 | |
| 98F71201006232 | Axle piece | 1 | |
| 98S32005007 | MLG WHEEL AXLE PROTECTOR | 1 | |
| 98S32005007200 | MLG Wheel Axle Protector | 2 | |
| 98S320050072000 | MLG AXLE WHEEL PROTECTOR | 1 | |
| 98S3200807300 | AXLE PROTECTOR | 1 | |
| 98S32008073000 | MLG Wheel Axle Protector | 14 | |
| 98S32008073000-REVC | PROTECTOR-MLG AXLE (ATR) | 1 | |
| 98S32008073000-REVC0 | MLG WHEEL AXLE PROTECTOR | 1 | |
| 98S320080773000 | MAIN AXLE WHEEL PROTECTOR | 1 | |
| 98S57105020200 | PILOT BUSH TOOL (WING TO FUSELAGE AXLE) | 5 | |
| 98S57105021200 | PILOT BUSH TOOL (WING TO FUSELAGE AXLE) | 5 | |
| 98S71003000230 | AXLE PIN FOR ENG /PROP REMOVAL INSTALLATION FIXTURE | 1 | |
| 98V32404001000 | PROTECTOR - MLG BRAKE AXLE | 8 | |
| 98V32404002202 | A350 AXLE CHANGE CAP | 1 | |
| 98V32404005000 | AXLE THREAD PROTECTOR | 4 | |
| 9SF10785-501 | Axle Puller Fixture | 1 | |
| A0269128 | PRESSING IN TOOL FOR AXLE BUSH | 1 | |
| A04007 | AIR CONNECTOR WITH PRESSURE RELIEF VALVE (IT IS PART OF THE TOOL J-AXLE45AHPA.)_ | 1 | |
| A07004-1 | AXLE JACK ADAPTOR SET | 1 | |
| A07008 | JACKING BAR EQPT MLG AXLE | 1 | |
| A07008-1 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 1 | |
| A07008-19 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 6 | |
| A07008-25 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 1 | |
| A07008-26 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 1 | |
| A07008-27 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 1 | |
| A07008-28 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 2 | |
| A07008-29 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 1 | |
| A07009-1 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 1 | |
| A22098-2 | 767 AXLE PROTECTOR | 1 | |
| A320-251 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 20 | |
| A32007-15 | MLG AXLE AND THREAD PROTECTOR | 1 | |
| A32007-17 | PROTECTOR EQUIPMENT - AXLE AND AXLE THREAD, MAIN LANDING GEAR (MLG) | 13 | |
| A32007-6 | AXLE THREAD PROTECTOR | 1 | |
| A32007-9 | MLG AXLE PROTECTOR | 5 | |
| A32012-13 | Adaptor MLG axle nut | 26 | |
| A32022 | PROTECTOR AXLE NOSE LANDING GEAR | 1 | |
| A32022-1 | PROTECTOR - AXLE, NOSE LANDING GEAR (NLG) | 27 | |
| A32025-1 | WRENCH ADAPTER - WHEEL RETAINING AXLE NUT, NOSE LANDING GEAR | 20 | |
| A32045-105 | AXLE NUT SPANNER (NLG) | 2 | |
| A32045-112 | WRENCH SPANNER R/I NLG AXLE NUT | 6 | |
| A32045-114 | WRENCH SPANNER R/I NLG AXLE NUT | 18 | |
| A32054 | PIN-ALIGNMENT,TRUCK AXLE BEAM,MLG | 1 | |
| A32054-1 | PIN - ALIGNMENT, TRUCK AXLE BEAM, MAIN LANDING GEAR (MLG) | 4 | |
| A32066-5 | AXLE SUPPORT ASSY | 1 | |
| A32079 | PULLER EQPT BRAKE SLEEVE MLG AXLE | 1 | |
| A32079-1 | PULLER EQUIPMENT - BRAKE SLEEVE, MAIN LANDING GEAR (MLG) AXLE | 8 | |
| A32083 | AXLE PULLER-MAIN LANDING GEAR | 1 | |
| A32083-12 | AXLE PULLER - MAIN LANDING GEAR (MLG) | 5 | |
| A32083-19 | AXLE PULLER ASSY | 1 | |
| A32097 | AXLE PROCTECTOR | 1 | |
| A32097-1 | PROTECTOR EQUIPMENT - EXTERNALLY THREADED AXLE, NOSE LANDING GEAR (NLG) | 22 | |
| A32097-2 | PROTECTOR THREAD AXLE NLG | 9 | |
| A32097-3 | Axle Protector | 8 | |
| A32098 | AXLE PROCTECTOR | 1 | |
| A32098-1 | PROTECTOR EQUIPMENT - AXLE, MAIN LANDING GEAR (MLG) | 25 | |
| A32098-12 | PROTECTOR EQUIPMENT - AXLE, MAIN LANDING GEAR (MLG) | 12 | |
| A32098-13 | PROTECTOR -AXLE THREAD MAIN LANDING GEAR (UNDERSIZE) | 3 | |
| A32098-13 | MLG AXLE THREAD PROTECTOR | 3 | |
| A32098-17 | B767 PROTECTOR EQPT-AXLE MLG | 1 | |
| A32098-2 | Axle Protector | 15 | |
| A32098-3 | MLG AXLE PROTECTOR | 11 | |
| A32098-6 | MLG AXLE PROTECTOR | 1 | |
| A32101 | WRENCH ADAPTER AXLE NUT NLG | 1 | |
| A32101-1 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 27 | |
| A32101-2 | WRENCH ADAPTER - AXLE NUT NLG | 8 | |
| A321CEO | MLG AXLE PROTECTOR | 1 | |
| A321WBCHGKIT | KIT WHEEL BRAKE CHANGE A321 PROTECTION-AXLE | 1 | |
| A97006 | LOCATING PIN (FOR INSTALLATION THE AXLE) | 3 | |
| A97011 | SPANNER-AXLE NUT, NLG | 10 | |
| A97123 | NLG AXLE THREAD PROTECTOR | 2 | |
| A97146 | SPANNER-AXLE NUT NLG | 4 | |
| A97146-1000 | SPANNER - AXLE NUT | 3 | |
| A97146-2 | SPANNER - AXLE NUT | 1 | |
| A97147 | AXLE PROTECTOR | 1 | |
| AAU126 | LIMITED SLIP REAR AXLE CUTAWAY | 1 | |
| AB-207 | AXLE PROTECTOR NLG (A320) | 1 | |
| AB-208 | AXLE PROTECTOR MLG (A320) | 1 | |
| AB32006-NY4 | PROTECTOR WHEEL AXLE | 1 | |
| AB94-2307 | TORQUE ADAPTOR, AXLE NUT | 2 | |
| ADA9758 | MLG AXLE NUT ADAPTER | 1 | |
| AGE-11831 | BLOCK, AXLE SUPPORT | 2 | |
| AGE11831 | BLOCK AXLE SPRT | 2 | |
| AGE16514 | FERR - PLAST COVER AXLE TURB GER EXT AERO | 4 | |
| AHA2306 | PROTECTOR-AXLE,NLG | 1 | |
| AM1803-732 | AXLE SAFETY PIN FOR CFM56-5 ENGINE STAND | 1 | |
| AMN1NEO | MLG AXLE PROTECTOR | 1 | |
| ANS19171 | AXLE NUT SOCKET 4-13/16 IN 8PT | 1 | |
| ANS1921A | SOCKET, AXLE NUT, 2 1/2 6-P | 3 | |
| AT30227 | AXLE PROTECTOR | 1 | |
| AT56245 | INSTALLATION TOOL SET-NLG PISTON/AXLE BUSHING | 1 | |
| AW-F72913-11 | AXLE THREAD PROTECTOR - NLG | 1 | |
| AW-F72913-8 | AXLE THREAD PROTECTOR - MLG | 1 | |
| AW-H46828 | NLG WHEEL AXLE NUT ADAPTER | 1 | |
| AW-M46750 | MLG WHEEL AXLE NUT ADAPTER | 1 | |
| AX-15T1NP | NLG JACK AXLE PORTABLE FOR BOEING&AIRBUS | 1 | |
| AXLE JACK 45 TON | AXLE JACK 45 TON WITH HAND PUMP | 1 | |
| AXS2PK | AXLE SPINNER KIT | 1 | |
| AXS45L | AXLE SPINNER 4 AND 5 LUG | 1 | |
| AXS6L | AXLE SPINNER 6 LUG | 1 | |
| B07003-15 | Jacking Bar Set -Main Landing Gear Axle (Repl. By B07008) | 1 | |
| B07008 | JACKING BAR EQPT -0 MAIN LANDING GEAR AXLE | 1 | |
| B07008-1 | JACKING BAR EQUIPMENT-MAIN LANDING GEAR AXLE | 4 | |
| B3010-15 | AXLE THREAD PROTECTOR | 1 | |
| B32010 | NLG/MLG WHEEL SOCKET & AXLE PRT | 1 | |
| B32010-10 | PROTECTOR AXLE NUT NLG | 1 | |
| B32010-14 | WRENCH AND AXLE PROTECTOR | 23 | |
| B32010-15 | MLG AXLE PROTECTOR | 18 | |
| B32010-23 | SPANNER-AXLE NUT, MLG | 11 | |
| B32010-28 | Thread Protector Eqpt - Undersized Axle | 7 | |
| B32010-3 | Nose leg axle protector - B757 | 14 | |
| B32010-5 | PROTECTOR, MLG AXLE | 11 | |
| B32010-6 | MLG AXLE PROTECTOR C | 12 | |
| B3201015 | PROTECTOR AXLE MLG | 18 | |
| B32021 | AXLE PROTECTOR -0 NLG | 1 | |
| B32021-1 | AXLE PROTECTOR - NOSE LANDING GEAR (NLG) | 19 | |
| B32021-1-M | AXLE PROTECTOR NLG | 1 | |
| B32021-2 | B757 NLG AXLE SLEVE PROTECTOR TOOL | 11 | |
| B32021-3 | PROTECTOR - AXLE, NOSE LANDING GEAR | 3 | |
| B32046 | ALIGNMENT PIN -0 MLG AXLE AND TOW FITTING | 1 | |
| B32046-1 | ALIGNMENT PIN - MAIN LANDING GEAR (MLG) AXLE AND TOW FITTING | 2 | |
| B32059 | PULLER EQPT -0 AXLE SLEEVE MLG | 1 | |
| B32059-15 | PULLER EQUIPMENT - AXLE SLEEVE, MAIN LANDING GEAR (MLG) | 5 | |
| B54001-11 | PROTECTOR EQPT. - AXLE & AXLE THREAD, MLG | 3 | |
| B76-1323201-1 | MLG AXLE TREAD PROTECTOR {UNDER SIZE}. | 1 | |
| BA80-101 | PROTECTOR AXLE MLG | 1 | |
| BAWA-6 | EMB 170-175 MLG AXLE NUT ADAPTER 3" - 6 POINT. DRIVE 3/4" | 1 | |
| BENCH VISE | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| BOXCRJ200MLG | Boxell Aerospace BOXCRJ200MLG Bombardier CRJ 200Challenger 600 Main Landing Gear Axle Nut Wrench | 1 | |
| BOXCRJ200NLG | Boxell Aerospace BOXCRJ200NLG Bombardier CRJ 200Challenger 600 Nose Landing Gear Axle Nut Wrench | 1 | |
| C29006-27 | THREAD PROTECTOR EQPT - MLG/NLG AXLE | 7 | |
| C29008-9 | Axle Pin | 1 | |
| C320022-35 | MLG AXLE THREAD PROTECTOR EQUIPMENT-1/16 IN UNDERSIZE | 1 | |
| C32012-1 | MLG / NLG AXLE NUT SOCKET EQPT. | 4 | |
| C32012-12 | MLG / NLG AXLE NUT SOCKET EQPT. | 26 | |
| C32012-13 | MLG AXLE TORQUE ADAPTER | 26 | |
| C32012-17 | MLG AXLE NUT PROT | 1 | |
| C32012-1922 | AXLE NUT SPANNER NLG | 3 | |
| C32012-20 | NLG AXLE NUT PROT | 1 | |
| C32012-3 | NLG AXLE TORQUE ADAPTER | 15 | |
| C32012-8 | AXLE NUT SOCKET EQUIPMENT | 5 | |
| C32013-15 | I NEED THE AXLE SOCKETS TO TAKE THE WHEELS OFF A 737-700 SERIES. THERE’S 2 PART NUMBERS. CAN YOU IDENTIFY THEM AND QUOTE BOTH? | 8 | |
| C32022 | THREAD PROTECTOR EQPT. MLGjNLG AXLE | 4 | |
| C32022 -20 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR AXLE | 32 | |
| C32022-1 | Thread Protector Eqpt-MLG NLG Axle | 4 | |
| C32022-15 | Thread Protector Equipment - Main Landing Gear/Nose Landing Gear Axle | 10 | |
| C32022-15 now -17 | Thread protector MLg axle | 1 | |
| C32022-16 | AXLE THREAD PROTECTOR | 10 | |
| C32022-17 | Thread Protector Equipment - Main Landing Gear/Nose Landing Gear Axle | 20 | |
| C32022-17D | MLG AXLE THREAD PROTECTOR | 1 | |
| C32022-18 | THREAD PROTECTOR MLG AXLE | 20 | |
| C32022-2 | Thread Protector Equipment - Main Landing Gear/Nose Landing Gear Axle | 17 | |
| C32022-2 | THREAD PROTECTOR EQUIPMENT - NLG AXLE | 17 | |
| C32022-2 / -5 | THREAD PROTECTOR NLG AXLE | 1 | |
| C32022-20 | Thread Protector Equipment - Main Landing Gear/Nose Landing Gear Axle | 32 | |
| C32022-20 | NLG AXLE THREAD PROTECTOR EQPT | 32 | |
| C32022-20 (-21) | THREAD PROT. EQUPT. - MLG/NLG AXLE | 1 | |
| C32022-21 | AXLE THREAD PROTECTOR | 14 | |
| C32022-23 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR AXLE | 14 | |
| C32022-24 | MLG Axle Protector Assy | 9 | |
| C32022-26 | B737 - MLG AXLE THREAD PROTECTION | 8 | |
| C32022-3 | MLG AXLE PROTECTOR | 21 | |
| C32022-3 | AXLE PROTECTOR - MLG | 21 | |
| C32022-32 | Thread Protector Eqpt - MLG/NLG Axle | 9 | |
| C32022-33 | STD-14321, PROTECTOR THREAD, EQPT, MLG AXLE (UNDERSIZED THREADS) INCLUDED IN SPL-14320 | 5 | |
| C32022-35 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR AXLE | 12 | |
| C32022-36 | Nose Landing Gear Axle Thread Protector | 3 | |
| C32022-38 | THREAD PROTECTOR EQUIPMENT - MAIN LANDING GEAR/NOSE LANDING GEAR AXLE | 13 | |
| C32022-39 | Thread Protector Eqpt - MLG Axle | 12 | |
| C32022-39 | THREAD PROTECTOR EQPT MLG/NLG AXLE | 12 | |
| C32022-40 | MLG AXLE THREAD PROTECTOR | 8 | |
| C32022-40 | THREAD PROTECTOREQP - MLG AXLE | 8 | |
| C32022-42 | STD-14321, PROTECTOR THREAD, EQPT, MLG AXLE (UNDERSIZED THREADS) INCLUDED IN SPL-14320 | 5 | |
| C32022-5 | NLG AXLE THREAD PROTECTOR | 9 | |
| C32022-9 | AXLE PROTECTOR | 3 | |
| C32032 | PULLER, MLG AXLE SLEEVE ASSEMBLY | 1 | |
| C32032-1 | KIT PULLER SLEEVE AXLE MLG | 2 | |
| C32032-123 | Axle Pin Assembly | 2 | |
| C32032-125 | PULLER EQUIPMENT - AXLE/BRAKE SLEEVE, MAIN LANDING GEAR | 9 | |
| C32032-14 | AXLE DRIFT PIN | 3 | |
| C32032-20 | AXLE CAP ADAPTER | 1 | |
| C32032-24 | Puller Eqpt - Axle Brake Sleeve-MLG | 1 | |
| C32032-34 | AXLE PIN | 1 | |
| C32032-35 | AXLE PULLER EXTENSION | 1 | |
| C32032-36 | AXLE EXTENSION ADAPTER | 1 | |
| C32032-57 | PULLER SLEEVE AXLE M | 7 | |
| C32032-59 | Puller Equipment - Axle/Brake Sleeve, Main Landing Gear | 5 | |
| C32032-8 | AXLE PIN | 1 | |
| C32032-98 | Puller Equipment - Axle/Brake Sleeve, Main Landing Gear (CE) | 10 | |
| C32032-¬125 | PULLER, MLG AXLE SLEEVE ASSEMBLY | 9 | |
| C32033-20C | NLG AXLE THREAD PROTECTOR | 1 | |
| C32034-273 | THREAD PROTECTOR AXLE NLG | 6 | |
| C32034-339 | THREAD PROTECTOR AXLE NLG | 11 | |
| C47261 | Adaptor NLG axle nut | 23 | |
| C47578 | Protector, axle A300/A310 | 23 | |
| C47578-1 | PROTECTOR-AXLE THREAD | 3 | |
| C47578-2 | PROTECTOR AXLE THREAD | 4 | |
| C47579 | PROTECTOR AXLE | 5 | |
| C47647 | MLG WHEEL AXLE PROTECTOR | 17 | |
| CAT5944-10 | PROTECTOR AXLE THREAD, MLG | 1 | |
| CAT5944-10T792994070300090 | BUSHING FOR PROTECTING THE THREAD OF THE WHEEL AXLE | 1 | |
| CAT5944-12 | AXLE NUT SOCKET EQUIPMENT | 1 | |
| CAT5944-13 | AXLE NUT SOCKET EQUIPMENT | 1 | |
| CAT5944‑10 | PROTECTOR AXLE THREAD MLG | 1 | |
| CJ127A | ADAPTOR REAR AXLE PLR 2.0 X1.2 | 1 | |
| CJ128A | ADAPTOR REAR AXLE PLR 2.3 X1.2 | 1 | |
| CJ137 | ADAPTOR REAR AXLE PLR 3.0 X1.2 | 1 | |
| CJ2003A | PULLER SET REAR AXLE | 1 | |
| CJ67D0250-1 | 15 Ton Axle Jack - 4.75 inches up to 14.94 inches | 4 | |
| CJMD107-003 | JACK ADAPTER - AXLE | 3 | |
| CL-16-LP | AXLE ALIGNMENT PIN | 1 | |
| COM-1818 | PROOF LOAD AXLE JACK ( WHEEL AND BRAKE DOLLY) | 1 | |
| CP070000. 1697.50 | AIR OPERATED AXLE JACK | 1 | |
| CXD-200009 | ALBERTH 25 TON AXLE JACK PN: CXD-200009 | 1 | |
| D32AXJ00003G01 | JACK AXLE PORTABLE | 1 | |
| D32AXJ00013G01 | AXLE JACK -TOWABLE TYPE 45T | 1 | |
| D32AXJ00015G01 | AIR OPERATED AXLE JACK | 1 | |
| D32AXJ00037G01 | Axle Jack-portable type 2.5Tons | 1 | |
| D46228 | SLEEVE-WHEEL AXLE PROTECTION | 1 | |
| D85034484 | AXLE NUT WRENCH ADAPTER | 1 | |
| DA1321018-103 | Axle Jack Adapter | 1 | |
| DCM1583-1 | SLEEVE, AXLE THREAD PROTECTING - MLG | 1 | |
| DCM1583-1-REVA | MLG - AXLE PROTECTIVE SLEEVE | 1 | |
| DCM1584-1 | SLEEVE, AXLE THREAD PROTECTING - NLG | 1 | |
| DCM1584-1-REVA | NLG AXLE PROTECTIVE SLEEVE | 1 | |
| DGSAJA-1S-101 | Axle Jack Adapter | 1 | |
| DN3YO2-02 | IMPACT/AXLE/NUT DISPLAY | 1 | |
| DPAX045TA00 | HYDRAULIC AIR/MANUAL OPERATED AXLE JACK | 1 | |
| DRT68004-1 | AXLE STOPS | 1 | |
| DRT68175 | SPANNER-AXLE,NUT | 1 | |
| DRT6866-1 | AXLE CROSS COUPLING RESISTOR BOXES | 1 | |
| DRT6866-2 | AXLE CROSS COUPLING RESISTOR BOXES | 1 | |
| DRT68661-1 | AXLE CROSS COUPLING RESISTOR BOXES | 1 | |
| DRT68661-2 | AXLE CROSS COUPLING RESISTOR BOXES | 1 | |
| DRT68776 | AXLE EXTRACTION PULL BAR | 1 | |
| DRT69393 | PALLET - BOGIE AND AXLE -800/900 | 1 | |
| DRT69434 | SPANNER - MLG AXLE NUT | 9 | |
| DRT69434 | SPANNER MLG AXLE NUT A350 | 9 | |
| DRT69434-1 | SPANNER SPANNER MLG AXLE NUT | 3 | |
| DRT69434-TAR | SPANNER MLG AXLE NUT | 1 | |
| DRT69437 | PROTECTOR - MLG WHEEL AXLE | 9 | |
| DRT69437-TAR | PROTECTOR MLG WHEEL AXLE | 1 | |
| DRT69512 | Pin Axle Sleeve Retention Remo | 5 | |
| DZZ7041-501 | PROTECTOR AXLE MLG | 8 | |
| DZZ7048-1 | AXLE THREAD PROTECTR | 1 | |
| DZZ7048-501 | Protector-MLG axle thread | 5 | |
| DZZ7154-1 | MD11 MLG AXLE NUT TORQUE ADAPTER | 7 | |
| DZZ7160-1 | M/L/G AXLE T/Q LINK APEX NUT ADAP | 3 | |
| DZZ7161-1 | M/L/G AXLE T/Q APEX BOLT GUIDE | 3 | |
| DZZ7162-1 | NLG AXLE NUT TORQUE ADAPTER | 5 | |
| DZZ7189-1 | CENTER L/G AXLE SLEEVE PULLER | 2 | |
| DZZ7193-1 | MAIN L/G AXLE SLEEVE PULLER | 1 | |
| DZZ7193-392 | PULL-MLG AXLE SLEEVES | 1 | |
| DZZ7243-501 | Set-adapter，axle sleeve puller，NLG | 1 | |
| F 46754-1000 | MLG AXLE PROTECTOR | 46 | |
| F-467541000 | AXLE PROTECTOR (MLG) | 46 | |
| F27579000 | UPPER BRACE AXLE HINGE REMOVAL TOOL | 1 | |
| F2913-13 | AXLE THREAD PROTECTOR UNDERSIZED | 1 | |
| F46173 | AXLE NUT ADAPTER | 1 | |
| F46753-1000 | THREAD PROTECTOR AXLE TOOL | 10 | |
| F46754 | AXLE THREAD PROTECTOR | 5 | |
| F46754-100 | MLG AXLE THREAD PROTECTOR TOOL | 5 | |
| F46754-1000 | NLG AXLE PROTECTOR. A320 | 46 | |
| F46754-1000-A | A320 MLG AXLE PROTECTOR | 1 | |
| F467541000 | A300/A320 AXLE PROTECTOR TOOL | 46 | |
| F46754‐1000 | MLG AXLE PROTECTOR | 46 | |
| F467554-1000 | MLG AXLE THREAD PROTECTOR | 1 | |
| F46757 | TORQUE AXLE PULLER | 1 | |
| F70314 | ALIGNMENT PIN -0 MLG AXLE LOCK BOLT TO ALIGN THE | 1 | |
| F71355 | Sleeve assy-main land’g gear axle protection | 3 | |
| F71363 | PROTECTOR AXLE MLG | 1 | |
| F72735-8 | MAIN AXLE PROTECTOR | 1 | |
| F72778 | PULLER -0 AXLE SLEEVE, LANDING GEAR USED FOR THE | 2 | |
| F72778-1 | PULLER SLEEVE AXLE M | 1 | |
| F72778-2 | PULLER SLEEVE AXLE M | 1 | |
| F72880 | AXLE THREAD PROTECTOR | 1 | |
| F72880-1 | PROTECTOR, M/W AXLE NUT | 1 | |
| F72880-3 | AXLE THREAD PROTECTOR | 1 | |
| F72880-4 | Thread Protector -Landing Gear Axle | 2 | |
| F72913 | AXLE PROTECTOR | 1 | |
| F72913-1 | AXLE & THREAD PROTECTOR | 5 | |
| F72913-10 | PROTECTION, AXLE & THD | 15 | |
| F72913-10 | AXLE & THREAD PROTECTOR SET | 15 | |
| F72913-10 KIT | AXLE THREAD PROTECTOR - MLG | 1 | |
| F72913-11 | PROTECTOR-AXLE MLG | 32 | |
| F72913-13 | PROTECTION, AXLE & THD | 10 | |
| F72913-13 | PROTECTOR SET - THREAD NLG & MLG Axle | 10 | |
| F72913-14 | AXLE THREAD PROTECTOR, MLG (UNDERSIZED) | 14 | |
| F72913-15 | AXLE THREAD PROTECTOR, NLG (UNDERSIZED) | 12 | |
| F72913-2 | AXLE PROTECTOR | 1 | |
| F72913-3 | AXLE & THREAD PROTECTOR -0 MAIN/NOSE GEAR TO | 9 | |
| F72913-4 | AXLE & THREAD PROTECTOR -0 MAIN/NOSE GEAR TO | 1 | |
| F72913-5 | AXLE PROTECTOR | 1 | |
| F72913-6 | AXLE THD PROTECTOR NLG B727 | 5 | |
| F72913-7 | PROTECTOR AXLE MLG | 1 | |
| F72913-8 | PROTECTOR, MLG THREAD & AXLE | 27 | |
| F7XC203259191 | MLG AXLE THREAD PROTECTOR | 2 | |
| F7XC203259192A1 | MLG AXLE PROTECTOR | 1 | |
| F80001-1 | ADAPTER AXLE JACK | 22 | |
| F80007 | SLEEVE AXLE PROTECTION MAIN GEAR | 1 | |
| F80007-1 | SLEEVE-MLG AXLE PROT | 1 | |
| F80007-1/F72913-8 | c. Axle Protection Sleeve | 1 | |
| F80007-3 | AXLE SLEEVE PROTECTOR | 1 | |
| F80126 | Puller Sleeve Axle MLG | 1 | |
| F80126-1 | MLG SLEEVE AXLE PULLER ASSY | 2 | |
| F80126-9 | PULLER EQPT - SLEEVE, AXLE | 7 | |
| F80126-9-M | PULLER EQPT -0 SLEEVE, AXLE | 1 | |
| F80168-1 | SOCKET, AXLE NUT - NOSE LANDING GEAR (F80168-1 IS OPTIONAL TO THE PREFERRED P/N 1922 SOCKET) | 31 | |
| F80168-2 | MLG AXLE SPANNER | 10 | |
| F80196-9 | PULLER JIG - AXLE | 1 | |
| F80198-1 | Plug Gauge MLG Axle Unit | 1 | |
| F80198-12 | AXLE NUT/PLUG GAUGE | 18 | |
| F80198-12 -13 -14 -15 | Plug Gauge -Landing Gear Axle Nut | 1 | |
| F80198-13 | PLUG GAGE MLG AXLE | 11 | |
| F80198-14 | PLUG GAGE-LANDING GEAR AXLE NUT | 12 | |
| F80198-15 | PLUG GAGE MLG AXLE UNIT | 9 | |
| F80198-16 | Plug gage, MLG axle Unit | 7 | |
| FA5010030 | PROTECTOR AXLE, THREAD, MLG 19-T00112-003 | 1 | |
| FA50100300 | PROTECTOR AXLE, THREAD, NLG 19-T0046-003 | 1 | |
| FIL8100-14-43A | Inner axle protection shell | 1 | |
| FIL8100-14-43C | Inner Axle Protection Shell (CLG) | 1 | |
| FIL8100-14-617 | Axle shell spring large | 1 | |
| FIL8100-14-618 | Axle shell spring small | 1 | |
| FIL8210A-08-018 | Axle clamp upper | 1 | |
| FIL8210A-08-019 | Axle clamp lower | 1 | |
| FIL8210A-08-020 | Axle clamp pivot link | 1 | |
| FIL8210A-08-022 | Axle clamp pivot | 1 | |
| FM000846 | ADAPTER - NOSE WHEEL AXLE | 1 | |
| FMGJA-100 | Main Gear Axle Jack Adapter | 1 | |
| FNGJA | Nose Gear Axle Jack Adapter | 1 | |
| FY5-07769W86-01 | AXLE SLEEVE PULLER | 1 | |
| G035-SA-484-301 | AXLE ROUND SUPPORT | 1 | |
| G035-SA-484-303 | AXLE WHEEL PIN | 1 | |
| G035-SA-484-676 | WHEEL AXLE PIN | 1 | |
| G07002 | JACKING BAR EQPT -0 MLG AXLE | 1 | |
| G07002-1 | JACKING BAR EQUIPMENT - MAIN LANDING GEAR AXLE | 3 | |
| G07004-1 | Jacking Bar Eqpt-MLG Axle | 5 | |
| G32-11-01-2B | MLG AXLE INSPECTION TOOL | 1 | |
| G32-21-01-2B | NLG AXLE INSPECTION TOOL | 1 | |
| G32007 | PROTECTOR -0 AXLE, WING & BODY LANDING GEAR | 1 | |
| G32007 7 | PROTECTOR KIT, THREAD AND AXLE, WING & BODY LANDING GEAR). | 8 | |
| G32007-1 | PROTECTOR - AXLE, WING AND BODY LANDING GEAR | 14 | |
| G32007-2 | AXLE PROTECTOR - WIN | 4 | |
| G32007-7 | PROTECTOR - AXLE, WING AND BODY LANDING GEAR | 8 | |
| G32007-8 | Protectr Axle | 3 | |
| G32008 | THREAD PROTECTOR -0 AXLE, MAIN & NOSE LANDING | 1 | |
| G32008-1 | THREAD PROTECTOR - AXLE, MAIN AND NOSE LANDING GEAR | 20 | |
| G32008-2 | PROTECTOR AXLE THREAD MLG | 8 | |
| G32008-5 | THREAD PROTECTOR - AXLE, MAIN AND NOSE LANDING GEAR | 7 | |
| G32008-6 | THREAD PROTECTOR - AXLE, UNDERSIZE MLG & NLG THREADS (FOR ALL 747S & 747-8 NLG ONLY)(G32008-6 INCLUDED IN G32008-5 KIT) | 3 | |
| G32010 | PULLER EQUIPMENT -0 AXLE SLEEVE, M.L.G. AND | 1 | |
| G32010-1 | PULLER EQUIPMENT - AXLE SLEEVE, MAIN LANDING GEAR AND NOSE LANDING GEAR | 4 | |
| G32010-2 | PULLER EQUIPMENT - AXLE SLEEVE, MAIN LANDING GEAR AND NOSE LANDING GEAR | 3 | |
| G32010-3 | PULLER EQUIPMENT - AXLE SLEEVE, MAIN LANDING GEAR AND NOSE LANDING GEAR | 3 | |
| G32040-1 | PULLER EQUIPMENT - AXLE SLEEVE, BODY LANDING GEAR, MAIN LANDING GEAR AND NOSE LANDING GEAR | 2 | |
| G32108-1 | THREAD PROTECTOR - AXLE, MAIN AND NOSE LANDING GEAR | 1 | |
| G36035-1 | AXLE PROTECTOR | 6 | |
| G601R324305-1 | SLEEVE MLG AXLE PROTECTION | 4 | |
| G601R324305???1 | PROTECTIVE SLEEVE ??? MLG AXLE | 4 | |
| G601R324305−1 | Protective Sleeve − MLG Axle | 4 | |
| G601R324306-1 | PROTECTIVE NUT MLG AXLE | 8 | |
| G601R324306−1 | Protective Nut − MLG Axle | 8 | |
| G670-321101-1 | SLEEVE, AXLE PROTECTION | 2 | |
| G670-321101-2 | Sleeve ? Mlg Axle Protection | 4 | |
| G670-321101−2 | SLEEVE - MLG AXLE PROTECTION | 4 | |
| G670-321102-1 | MLG AXLE PROTECTOR | 2 | |
| G670-321102-3 | MLG AXLE THREAD PROTECTOR | 7 | |
| G670-321102−3 | MLG AXLE PROTECTOR | 7 | |
| G670321101-1 | SLEEVE - MLG AXLE PROTECTION | 2 | |
| G670321101-2 | SLEEVE, AXLE PROTECTION | 4 | |
| G670−321101−2 | Sleeve − MLG Axle Protection | 4 | |
| G698-321101-101 | Sleve ? Mlg Axle Protection | 1 | |
| G698-321102-101 | MLG AXLE THREAD PROTECTOR | 1 | |
| G698−321101−101 | Sleeve − MLG Axle Protection | 1 | |
| GE-56726 | AXLE SLEEVE PULLER | 1 | |
| GE56726 | AXLE SLEEVE PULLER | 1 | |
| GE56726F | AXLE PULLER KIT | 1 | |
| GSE 32X−11−07 | MLG AXLE PROTECTIVE COVER | 1 | |
| GSE047 | PROTECTOR, AXLE THREAD - NLG | 1 | |
| GSE048 | AXLE PROTECTOR | 1 | |
| GSE0700033 | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| GSE0700037 | LOW PROFILE AXLE JACK 25 TON | 1 | |
| GSE3200486 | AXLE JACK ADAPTER | 1 | |
| GSE3200487 | AXLE PROTECTOR | 1 | |
| GSE3200561 | AXLE THREAD PROTECTOR KIT-GSE3200561 | 1 | |
| GSE3200703 | NOSE LANDING GEAR AXLE THREAD PROTECTOR | 1 | |
| GSE3200891 | AXLE THREAD PROTECTOR | 1 | |
| GSE55740 | EXTRACTOR, AXLES RETAINING PIN - WLG AND BLG | 1 | |
| GSE55758 | Aft axle steering lock springs extension tool | 1 | |
| GSE55759 | Aft axle unlock actuator safety pin | 1 | |
| GSE55759 NC | AFT AXLE STEERING SAFETY PIN | 1 | |
| GSE55759 REVA | AFT AXLE STEERING SAFETY PIN & Block | 1 | |
| GSE55759REVA | AFT AXLE STEERING SAFETY PIN | 1 | |
| GSE55916-401 | AXLE ADJUS. SUPPORT ASSY | 1 | |
| GSE55923 | SPANNER, AXLE NUT - WLG AND BLG | 5 | |
| GSE55925 | PROTECTOR, AXLE - WHEEL | 6 | |
| GSE55927 | PULLER -AXLE, REMOVAL & INSTALLATION BLG & WLG | 1 | |
| GSE55928 | Centre axle retaining pin an nut installation | 1 | |
| GSE55929 | Aft axle pivot pin retaining nut wrench | 1 | |
| GSE55930 | Aft axle steering actuator pin guide bullet | 1 | |
| GSE55974 | GUIDE CONE, AXLE PIVOT PIN - BLG | 1 | |
| GSE57297 | WRENCH-CENTRE AXLE, SECURING PIN NUT | 1 | |
| GSE57669 | PIN-SAFETY,AFT AXLE STEERING,BLG | 1 | |
| GSE57669NC | PIN AXLE UNLOCK ACTUATOR | 1 | |
| GSE57830 | AXLE THREAD PROTECTOR | 1 | |
| GULFSTREAM AXLE JACK ADAPTOR | Gulfstr Axle Jack Adap Steel | 1 | |
| H 46750 | ADAPTER MLG WHEEL AXLE NUT | 3 | |
| H 46828 | ADAPTER NLG WHEEL AXLE NUT | 19 | |
| H45838 | MLG WHEEL AXLE NUT ADAPTOR | 1 | |
| H46750 | MLG WHEEL AXLE NUT ADPTR | 3 | |
| H46750-001 | ADAPTER MLG WHEEL AXLE NUT | 3 | |
| H46826 | ADAPTER MLG WHEEL AXLE | 1 | |
| H46828 | NLG Wheel Axle Nut Adptr | 19 | |
| H46828-ST | NLG WHEEL AXLE NUT ADAPTER | 1 | |
| H4682B | N/W AXLE NUT ADAPTOR | 1 | |
| H46838 | MLG Wheel Axle Nut Adptr | 14 | |
| H46838 | ADAPTER MLG AXLE NUT ART42 | 14 | |
| H47682 | MLG AXLE NUT ADAPTOR | 43 | |
| HRR976 | 12 POINT AXLE NUT SOCKET SET | 1 | |
| HU55280-3-DET23 | AXLE PIVOT | 1 | |
| IM883 | SOCKET, NLG AXLE NUT (2 3/4 INC SOCKET, 6 POINT) | 4 | |
| IMM883 | SOCKET, NLG AXLE NUT (2 3/4 INC SOCKET, 6 POINT) | 1 | |
| J-47548-1 | AXLE PROTECTOR (NLG) | 13 | |
| J-AXLE 12 HPA | J-AXLE 12 HPA, CAPACITY: 12 TONN JMS AG | 1 | |
| J-AXLE-PHA | PRESSURE-HOSE-KIT-FOR-J-AXLE | 2 | |
| J-AXLE12HPA | JACK AIRPLANE AXLES | 1 | |
| J-AXLE45AHPA | AXLE JACK WITH HAND PUMP 45T (A320/A330) | 2 | |
| J-AXLE60AHPA | AXLE JACK 60 T (66 US SHORT TONS) HPA WITH PNEUMATIC SUPPORT AND HANDPUMP J-AXLE60AHPA | 1 | |
| J-CART-A | TRANSPORT CART FOR J-AXLE A SERIES JACKS | 1 | |
| J07005-52 | JACKING EQUIPMENT - MAIN LANDING GEAR AXLE (EMERGENCY CONDITION) | 3 | |
| J07009-1 | Jack Equipment MLG Axle | 1 | |
| J07013-1 | JACKING EQUIPMENT - MAIN LANDING GEAR AXLE (EMERGENCY CONDITION) | 10 | |
| J07013-1 REV.A | JACKING EQUPT. - MLG AXLE | 1 | |
| J07014-1 | PROOF LOADING EQUIPMENT - AXLE JACKING EQUIPMENT | 1 | |
| J32007 | PROTECTOR EQPT-AXLE & THREAD. NLG | 1 | |
| J32007-1 | PROTECTOR EQUIPMENT - AXLE AND THREAD, NLG | 22 | |
| J32007-2 | B777 NLG AXLE PROTECTOR | 14 | |
| J32007-3 | AXLE PROTECTOR | 9 | |
| J320071 | PROTECTOR EQUIP- AXLE & THREAD, NLG | 22 | |
| J32010 | PULLER EQPT-WHEEL & BRAKE SLEEVES, MLG AXLES | 1 | |
| J32010-1 | PULLER SLEEVE AXLE M | 2 | |
| J32010-106 | PULLER EQUIPMENT - WHEEL AND BRAKE SLEEVES, MAIN LANDING GEAR (MLG) AXLES (CE) | 8 | |
| J32010-107 | PULLER EQUIPMENT - BRAKE SLEEVE, MAIN LANDING GEAR AXLES (CE) | 4 | |
| J32010-110 | PULLER EQUIPMENT - BRAKE SLEEVES, MAIN LANDING GEAR AXLES | 6 | |
| J32010-58 | PULLER EQUIPMENT - WHEEL AND BRAKE SLEEVES, AXLES | 2 | |
| J32010-62 | Puller Equipment -Wheel And Brake Sleeves. Main Landing Gear (Mlg) Axles | 7 | |
| J32010-62/F | Puller equipment-wheel & brake sleeves，MLG axles | 1 | |
| J32010-74 | PULLER EQUIPMENT - WHEEL AND BRAKE SLEEVES, MAIN LANDING GEAR AXLES (CE) | 1 | |
| J32010-75 | Puller Eqpt - Wheel and Brake Sleeves, MLG Axles | 1 | |
| J3203-13 | AXLE PROTECTOR-MAIN | 10 | |
| J32031 | PROTECTOR EQPT. AXLE MAIN LANDING GEAR | 1 | |
| J32031 – 12 | PROTECTOR EQUIPMENT - AXLE | 22 | |
| J32031-1 | AXLE PROTECTOR | 1 | |
| J32031-12 | PROTECTOR EQUIPMENT - AXLE, MAIN LANDING GEAR | 22 | |
| J32031-12-REVC | MLG AXLE/THREAD PROTECTOR ASSY | 2 | |
| J32031-13 | B777 MLG AXLE PROTECTOR | 13 | |
| J32031-3 | AXLE PROTECTOR | 10 | |
| J32031-3 | AXLE PROTECTOR MLG | 10 | |
| J32031-3-M | AXLE PROTECTOR | 1 | |
| J32031-5 | AXLE PROTECTOR | 1 | |
| J32032-22 | Puller Equipment, Axle Brake Sleeve | 23 | |
| J32032-23 | AXLE PROTECTOR / TREAD PROTECTOR | 11 | |
| J32032-4 | SUPPORT ROD AXLE MAIN LANDING GEAR | 4 | |
| J32045-114 | N/W AXLE PROTECTOR | 1 | |
| J32066-5 | Axle Support | 1 | |
| J47237 | TOOL, WHEEL AXLE PROTRA | 1 | |
| J47349 | NLG AXLE NUT ADAPTOR | 1 | |
| J47548 | PROTECTOR, AXLE NLG | 39 | |
| J47548-1 | NLG AXLE THREAD PROTECTOR TOOL | 13 | |
| J47548-2 | Axle protector B757 | 9 | |
| J47548-A | J47548-A – PROTECTOR AXLE NLG A320 | 1 | |
| J47548-S | AXLE THREAD PROTECTOR NLG | 1 | |
| J47549 | ADAPTOR NLG AXLE NUT | 43 | |
| J47779 | PROTECTOR-AXLE MLG A | 32 | |
| J47779-S | PROTECTOR, WHEEL AXLE | 1 | |
| JAMTV360N2 | 12 PNEUMATIC WHEEL ON AXLEX 30X60 | 1 | |
| JMS AG | J-AXLE 12 HPA CAPACITY: 12 TONN | 1 | |
| JXHK-GB-1230 | 65T JACK, AXLE(T-type with air pump | 1 | |
| JXHK-GB-1255 | 50T Axle Jack(portable， manual） | 2 | |
| JXHK-GB-1290 | AXLE JACK -90 TON(T-type with air pump | 1 | |
| JXHK-GB-1345 | 50T Axle Jack(portable， manual)(A: RC4509) | 1 | |
| JXHK-GB-1356 | 50T Axle Jack(portable， manual，generic version） | 1 | |
| JXHK-GB-1360 | 60T Axle Jack(T-type with air pump) | 1 | |
| JXHK-GB-1611 | AXLE JACK TRANSPORT VEHICLE | 1 | |
| K-1125 | Kit, Repl. Axle Locking | 1 | |
| K-1200 | Kit, Repl. Axle Locking | 1 | |
| K-1201 | Kit, Repl. Axle Locking | 1 | |
| K-1380 | Kit, Repl. Axle Lock Mech. | 1 | |
| K-1558 | Kit, Repl. Axle (P) | 3 | |
| K-1561 | Kit, Repl. Axle (P) | 3 | |
| K-2179 | KIT, AXLE JACK ADAPTER | 1 | |
| K-2728 | Nose Gear Axle Jack Adapter | 1 | |
| K-2730 | MAIN GEAR AXLE JACK ADAPTER (02-7833-0110) | 1 | |
| K-2730 (02-7833-0110) | Main Gear Axle Jack Adapter (02-7833-0110) | 1 | |
| K-3771 | ENERPAC HAND PUMP FOR 10.9/22.7 AXLE JACK | 1 | |
| K-3771 / P-802 | ENERPAC HAND PUMP FOR 10.9/22.7 AXLE JACK | 1 | |
| K-3800 | KIT REPLACEMENT, FOR JACK ASSY, L/G AXLE JACKING | 1 | |
| K-3961 | KIT, AXLE MOUNTING (P) | 2 | |
| K-4126 | KIT, AXLE ASSEMBLY ADAPTER | 2 | |
| K-4229 | KIT, NOSE ADAPTER ASS'Y - INCLUDED WITH 02-7818C0110 AXLE JACK | 4 | |
| K07001-14 | EQUIPMENT - JACKING, MAIN LANDING GEAR AXLE (EMERG | 3 | |
| K07001-18 | EQUIPMENT - JACKING, MAIN LANDING GEAR AXLE (EMERGENCY CONDITIONS) | 7 | |
| K07002-17 | EQUIPMENT - JACKING, NOSE LANDING GEAR AXLE (EMERGENCY CONDITIONS) | 4 | |
| K2179 | KIT: ADAPTER,AXLE JACK, | 1 | |
| K27011-33 | EQUIPMENT - PROTECTOR, MAIN LANDING GEAR AXLE | 12 | |
| K32002 | PROTECTOR EQPT -0 AXLE & THREAD, NLG | 1 | |
| K32002-1 | PROTECTOR EQUIPMENT - AXLE AND THREAD, NOSE LANDING GEAR | 17 | |
| K32002-1 | PROTECTOR EQUIPMENT-AXLE&THREAD,NLG | 17 | |
| K32002-1? | PROTECTOR EQUIPMENT-AXLE | 17 | |
| K32002-2 | AXLE-PROTECTOR ASSY | 7 | |
| K32002-3 | B787 AXLE ,THREAD PROTECTOR NLG | 8 | |
| K32022-1 | PROTECTOR AXLE & THREAD NLG | 18 | |
| K32022-2 | AXLE NUT SPANNER NLG | 7 | |
| K32036 | DISPATCH EQPT-AXLE RDC CONNECTOR COVERS | 1 | |
| K32036-1 | DISPATCH EQUIPMENT - AXLE REMOTE DATA CONCENTRATOR (RDC) CONNECTOR COVERS | 10 | |
| K32036-2 | DISPATCH EQUIPMENT - AXLE REMOTE DATA CONCENTRATOR (RDC) CONNECTOR COVERS | 8 | |
| K32036-21 | DISPATCH EQUIPMENT - AXLE REMOTE DATA CONCENTRATOR (RDC) CONNECTOR COVERS | 7 | |
| K32036-2 | DISPATCH EQUIPMENT - AXLE RDC (REMOTE DATA CONCENTRATOR) CONNECTOR COVERS NOTE: ADAPTER SIMULATOR ASSY -4 IDENTIFIED AS ORAN | 8 | |
| K32036-2 upgrade to K32036-1 | Dispatch eqpt-axle rdc connector covers | 1 | |
| K32036-3 | DISPATCH EQUIPMENT - AXLE REMOTE DATA CONCENTRATOR (RDC) CONNECTOR COVERS | 3 | |
| K32036-36 | DISPATCH EQUIPMENT - AXLE REMOTE DATA CONCENTRATOR (RDC) CONNECTOR COVERS | 6 | |
| K32036-7 | DISPATCH EQPT- AXLE RDC COVER | 2 | |
| K32037-1 | PROTECTOR EQUIPMENT - AXLE, MAIN LANDING GEAR | 10 | |
| K32037-1 | PROTECTOR EQPT-AXLE,MAINLANDING GEAR | 10 | |
| K32037-2 | Axle Protector Assembly | 6 | |
| K32038 | PULLER EQUIPMENT - WHEEL SLEEVE, MAIN LANDING GEAR AXLE (CE) | 1 | |
| K32038-1 | Puller eqpt-wheel and brake sleeves，MLG axles | 1 | |
| K32038-59 | Puller eqpt-brake sleeve，MLG axles | 1 | |
| K32038-62 | PULLER EQUIPMENT - BRAKE SLEEVE, MAIN LANDING GEAR AXLES (CE) | 7 | |
| K32038-63 | PULLER EQUIPMENT - BRAKE SLEEVE, MAIN LANDING GEAR AXLES | 1 | |
| K32042-1 | PULLER EQUIPMENT - WHEEL SLEEVE, MAIN LANDING GEAR AXLE (CE) | 8 | |
| K4126 | KIT: ADAPTER,AXLE,ASSEMBLY | 2 | |
| K4130 | KIT: ADAPTER,AXLE,3.84IN DIA, | 1 | |
| K4768 | KIT: BASE,REPLACEMENT, AXLE JACK,02-7835-0100 | 2 | |
| M46450 | MAIN WHEEL AXLE NUT ADAPTOR | 1 | |
| M46707 | Protector - MLG Wheel Axle | 8 | |
| M46708 | AXLE PROTECTOR | 7 | |
| M4675 | MLG WHEEL AXLE NUT ADPTR | 6 | |
| M46750 | MLG Wheel Axle Nut Adptr | 20 | |
| M47157-100 | Adaptor NLG axle nut | 19 | |
| M47380-100 | AXLE PROTECTOR, NLG | 12 | |
| M47380-200 | AXLE PROTECTOR | 10 | |
| M47381 | A330 MLG AXLE PROTECTOR | 27 | |
| M47382 | NLG AXLE PROTECTOR | 4 | |
| M47382-100 | NLG AXLE PROTECTOR - A330/340 | 27 | |
| M47650 | MLG AXLE NUT ADAPTOR | 1 | |
| M4G750 | ADAPTER - MLG WHEEL AXLE NUT | 1 | |
| MA7381 | PROTECTOR AXLE GUIDE CONE MLG | 1 | |
| MG210-01 | FLAP-AXLE KEY | 1 | |
| MH46750-MLG WHEEL AXLE NUT ADA | MLG WHEEL AXLE NUT ADAPTER | 1 | |
| MHF-40 | AXLE JACK TYPE AIR PNEUMATIC 40TON - MLG | 1 | |
| MIT161W1122 | MISCELLANEOUS TOOL - BUSHING REPLACEMENT AND HONING KIT, INNER CYLINDER, CENTER AXLE | 4 | |
| MIT65B01202-1 | MLG AXLE NUT ADAPTER | 10 | |
| MODEL 642S | AXLE JACK NLG, CAPACITY 10 TON | 2 | |
| MODEL 648A | AXLE JACK NOSE LANDING GEAR CAPACITY 10 TON | 1 | |
| MODEL 8919 | AXLE JACK MAIN LANDING GEAR CAPACITY 45 TON | 1 | |
| MODEL642S | AXLE JACK 10 TON CAPACITY 5 IN WIDTH 17 IN HEIGHT | 2 | |
| NAS7000-02 | AXLE STRAP | 1 | |
| OTC7494A | REAR AXLE BEAR PULL SET | 1 | |
| OU50408 | SUPPORT TUBE FOR AXLE | 1 | |
| OU50410 | SUPPORT TUBE FOR AXLE | 1 | |
| OU50418 | PIN FOR AXLE | 1 | |
| OU50419 | PIN FOR AXLE | 1 | |
| P-1922 | SOCKET, AXLE NUT - NOSE LANDING GEAR (F80168-1 IS OPTIONAL TO THE PREFERRED P/N 1922 SOCKET) | 8 | |
| P1908 | SPANNER-AXLE NUT,NLG | 11 | |
| PO-54665-SL | HOSE PRESSURE KIT FOR AXLE JACK | 1 | |
| PR46000-2 | BASESPN BASE FOR DUMMY WHEEL AXLE | 3 | |
| PRESSURE REGULATOR, 0 - 5 PSI | MAIN GEAR AXLE JACK ADAPTER-GSE0700033 | 1 | |
| Q47062 | AXLE PROTECTION SLEEVE | 1 | |
| Q47316 | PROTECTOR-MLG AXLE (MHB) | 33 | |
| Q47316-OHY | PROTECTOR ANA AXLE A321A320 | 1 | |
| Q47316-S | PROTECTOR-MLG AXLE | 1 | |
| Q47323-1 | PROTECTOR AXLE BRAKE | 16 | |
| Q47323-1 | PROTECTOR, WHEEL AXLE | 16 | |
| Q47334 | ADAPTOR A321 AXLE NUT | 10 | |
| Q7316 | A321 MLG AXLE PROTECTOR | 1 | |
| R46,014 | NLG AXLE NUT SOCKET (POST-MOD) | 28 | |
| R46014 | ADAPTOR AXLE - NLG | 28 | |
| R46279 | AXLE PROTECTOR BRAKE | 1 | |
| R46729 | BRAKE - AXLE PROTECTOR | 8 | |
| R46738 | PROTECTOR - AXLE | 10 | |
| R47937 | SUPPORT AXLE | 1 | |
| RA430 | 1.5 TON ALUMINIUM AXLE STANDS (PR) | 1 | |
| RA6007 | AIR OPERATED AXLE JACK | 1 | |
| RA7704-002 | AIR OPERATED AXLE JACK | 1 | |
| RA9003 | AIR OPERATED AXLE JACK | 1 | |
| RC2508 | AXLE JACKS (WITH TRANSPORTATION TROLLEY) | 1 | |
| RC4509 | JACK - AXLE, RC-TYPE MLG & NLG | 1 | |
| RC4509B1A0A10 | AXLE JACK 45 TON CAPACITY HYDRO | 6 | |
| RC4509K5A0A03 | HYD & AIR PUMP JACK AXLE | 1 | |
| RC4509K5A0A10 | HYD & AIR PUMP JACK AXLE | 4 | |
| RC6008 | COMPACT TYPE AXLE JACK | 1 | |
| RC9002 | JACK - AXLE, FLYAWAY - 99 TON CAPACITY | 1 | |
| RC9002K2A0A06 | Jack - Axle, Flyaway - 99 Ton Capacity | 1 | |
| RH1029 | JACK - AXLE, HAND CARRY, 11 TON CAPACITY, 5.7 CLOSED HEIGHT, 10.4 LIFT, 1.6 SCREW EXTENSION, 17.7 INCH EXTENDED HEIGHT, (HYDRO-GERAETEBAU GMBH & CO. K.G.) | 1 | |
| RH1606 | JACK AIRPLANE AXLES | 1 | |
| RL7702K3A1A01 | Jack - Axle, Cantilever - 84.7 Ton Capacity | 1 | |
| RT15050-002 | JACK JACK, AXLE - A380 AND OTHER TYP | 2 | |
| RT6050-001 | AIR OPERATED AXLE JACK | 7 | |
| RT9050 | AXLE JACK 90 TON CAPACITY X IN WIDTH 27.5 IN HEIGHT | 1 | |
| RT9050-001 | AXLE JACK 90 TON CAPACITY X IN WIDTH 27.5 IN HEIGHT | 7 | |
| S2002A | ENSEMBLE DÕESSIEUX COMPLET (AXLE , NU & COTTER PIN ) | 3 | |
| S3387-0011 | GSE032 102 PROTECTOR, MLG AXLE TREAD | 1 | |
| S48417 | SLEEVE TO PROTECT THE WHEEL AXLE THREADS OF THE SAFRAN LANDING SYSTEM | 1 | |
| S48417T792994070100090D | BUSHING TO PROTECT THE THREAD OF THE WHEEL AXLE | 1 | |
| S49956 | PROTECTOR - MLG BRAKE AXLE | 3 | |
| S49956-1 | AXLE PROTECTION BRAKE | 4 | |
| S6400 | 4 PIN AXLE LCK NUT SCKT 1/2 DR | 1 | |
| S6804 | 9 PIN REAR AXLE NUT SOCKET | 1 | |
| S6806 | 6 PIN AXLE NUT SOCKET | 1 | |
| S6812 | 12PIN AXLE NUT SPANNER SOCKET | 1 | |
| S8900 | 1/2 DR. 9 PIN GM AXLE NUT SOC | 1 | |
| SA1234 | AXLE NUT ADAPTOR | 1 | |
| SA30251 | AXLE SLEEVE EXTRACTOR NOSE SHEEL-DAP 00005-01 MAIN WHEEL-2615115 | 1 | |
| SA3812 | AXLE NUT ADAPTOR | 1 | |
| SAL12 | PROTECTOR - AXLE, NLG | 4 | |
| SAL17 | AXLE PROTECTOR - BRAKE WLG & BLG | 3 | |
| SAL18 | CONE -GUIDE, AXLE WHEEL PROTECTOR NLG | 3 | |
| SCA-NAS32-737MAX | THREAD PROTECTOR NLG AXLE B737 NG | 1 | |
| SCA500KG | PROOF LOAD AXLE JACK ( WHEEL AND BRAKE DOLLY) | 1 | |
| SCA65-1 AP | 65 TON AIR OPERATED AXLE JACK | 2 | |
| SCA65-1AP | AIR OPERATED AXLE JACK | 2 | |
| SE92-0300 | AXLE PROTECTOR-NLG | 1 | |
| SG158 | TRANSPORTATION TROLLEY FOR AXLE JACK | 1 | |
| SG158-001 | SINGLE TRANSPORTATION TROLLEY FOR RT AXLE-JACK SERIES | 1 | |
| SG285 | SINGLE TRANSPORTATION TROLLEY FOR RT AXLE-JACK SERIES | 1 | |
| SPANNER - AXLE NUT, MLG (AIRBUS 330) | SPANNER - AXLE NUT, MLG (AIRBUS 330) | 1 | |
| SPL-10821 | PROTECTOR KIT - THREAD AND AXLE, WING & BODY LANDING GEAR (747-8 ONLY) | 1 | |
| SPL-1877 | PROTECTOR - THREAD AND AXLE, NLG | 1 | |
| SPL-6360 | 747 MLG UNDERSIZED AXLE THREAD PROTECTOR | 1 | |
| SPL1877 | NWA AXLE THREAD PROTECTOR | 1 | |
| ST-905-072 | SPANNER WRENCH NOSE GEAR AXLE | 2 | |
| STK71410 | AXLE POPPER | 1 | |
| STK71415 | AXLE POPPER | 1 | |
| T-4277B | AXLE FLANG-PROTO | 1 | |
| T000025 | MLG 3/5 Axle sleeve puller | 1 | |
| T12-800 | STRAP: AXLE, | 1 | |
| T46126 | MLG AXLE PROTECTIVE COVER | 2 | |
| T46504 | NLG WHEEL-AXLE PROTECTIVE-COVER | 1 | |
| T48334 | ADAPTER-NLG WHL AXLE NUT | 1 | |
| T49939-5 | ASSEMBLY TOOL, INSTALL PISTON AXLE | 1 | |
| TENSIOMETER 10 - 300 POUNDS (4 | AXLE THREAD PROTECTOR KIT-GSE3200561 | 1 | |
| TF50B32302 | AXLE PROTECTION SLEE | 1 | |
| TMH CR12-00-00 | AXLE JACK WITH PUMP | 1 | |
| TMHCP13 | AXLE JACK (WITH NA01 ADOPTER) | 1 | |
| TMHCP13-00-00 | AXLE JACK (WITH NA01 ADOPTER) | 7 | |
| TMHCR01-40-00 | AXLE JACK (AIRBUS & BOEING | 2 | |
| TMHCR12-00-00 | AXLE JACK 49.5 TON CAPACITY 7.1 IN WIDTH 25.4 IN HEIGHT | 1 | |
| TMHCR15 | AXLE JACK 60 TON CAPACITY 8.3 IN WIDTH 27.4 IN HEIGHT | 1 | |
| TMHMA010000 | ATR72 AXLE MLG JACK ADAPTOR | 1 | |
| TMHMA02 | MLG WHEEL AXLE NUT ADPTR | 2 | |
| TMHNA010000 | ATR72 AXLE NLG JACK ADAPTOR | 9 | |
| TOOL129 | McFarlane TOOL129 Black 1, 1-14 & 1-12 Axle Size Aircraft Tire Balancer | 1 | |
| TOOL129-LA-KT | McFarlane TOOL129-LA-KT Large (1-58 & 2) Axle Bushing Kit | 2 | |
| TW-5 | MAULE AXLE W/ TW-6 SIRCLIP | 3 | |
| VP Packing AJ | PACKING FOR AXLE JACKS: STANDARD | 1 | |
| W46828 | NOSE WHEEL AXLE NUT ADPTOR | 1 | |
| YA498A | FLANGE AXLE/FRONT WHEEL PULLER | 1 | |
| YA6545 | STAKED AXLE NUT PUNCH SET | 1 | |
| Z-1694 | WLDMNT, AXLE JACK ADAPTOR | 1 | |
| Z-2168-01 | AXLE JACK PLATE | 6 | |
| Z-2169-01 | AXLE JACK PLATE | 7 | |
| Z-2639 | Lear Main Gear Axle Jack Adapter | 4 | |
| Z-2641 | Lear Nose Gear Axle Jack Adapter | 2 | |
| Z-3275 | TRONAIR K-4191 AXLE JACK PAD REPLACEMENT - NOSE GEAR | 1 | |
| Z1694 | WLDMNT,AXLE JACK ADAPTER, | 1 | |
| c32022-24 | Main Landing Gear Axle Protector Assembly | 9 | |
| f 80198-1 | Plug Gage- MLG Axle Nut | 1 | |
| f80198-1 | Plug Gage- MLG Axle Nut | 1 | |
| K32002-2 | NLG AXLE PROTECTOR | 7 | |
| K32037-2 | MLG AXLEPROTECTOR | 6 | |
| C32022-21 | NLG AXLE THREAD PROTECTOR | 14 | |
| C32022-24 | MLG AXLE PROTECTOR ASSY | 9 | |
| C32022-40 | THREAD PROTECTOR EQPT-MLG/NLG AXLE | 8 | |
| J47548 | NLG AXLE PROTECTOR | 39 | |
| K32036-21 | DISPATCH EQPT - AXLE RDC CONNECTOR COVER | 7 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
