| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 58483A0000-01 | ASSEMBLY KIT | 1 | |
| 846‑820‑030 | ASSEMBLY KIT | 1 | |
| 8818353000 | ASSEMBLY KIT | 1 | |
| DET05AEKTIL03 | ASSEMBLY KIT | 1 | |
| DET05AEKTIM03 | ASSEMBLY KIT | 1 | |
| DLT30PSKT3000 | ASSEMBLY KIT | 7 | |
| DLT40PSKT3004A | ASSEMBLY KIT | 1 | |
| TM0480G001 | ASSEMBLY KIT | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 15F2496 | KIT: MOUNT ASSEMBLY, (CALIBRATION) | 1 | |
| 012A0061-1 | TOP KIT � NO.2 WINDOW HEAT COIL CORD ASSEMBLY | 4 | |
| 012N8928-126 | TOP KIT - BLOWOUT PANEL ASSEMBLY, SQUARE | 1 | |
| 015U1952-4 | TOP-KIT 747-400 PASSENGER ZTS ASSEMBLY INSTALLATION | 1 | |
| 048011-03760-8 | ROTO PEEN ASSEMBLY KIT | 1 | |
| 048011-17157 | ROTO PEEN ASSEMBLY KIT | 1 | |
| 048011-17157-9 | 3M ROTO PEEN ASSEMBLY KIT | 2 | |
| 05K22680 | LYCOMING KIT - CYLINDER PISTON & RING ASSEMBLY (TIO-540-AJ1A) | 4 | |
| 1065 | KIT, INFLATOR ASSEMBLY | 4 | |
| 1075 | TIRE INFLATOR ASSEMBLY KIT | 2 | |
| 09041 | ROTO PEEN ASSEMBLY KIT | 1 | |
| 109-39DI-26-127 | MAINTENANCE KIT, AIRCRAFT (T/R HUB & BLADE ASSEMBLY INSTALLATION) | 1 | |
| 115-00218 | KIT: HOSE,ASSEMBLY, KIT=2EA 40FT HOSES & PITOT ADA | 4 | |
| 12-00977 | A/C ASSEMBLY SCRAPER KIT | 1 | |
| 15138-K | Kit, Solid Door Assembly | 1 | |
| 162T1300-1-A | ASSEMBLY KIT BUSHING (2IT) | 1 | |
| 16720-2KT | ASSY/DISASSEMBLY TOOL KIT (4IT) | 1 | |
| 18028G-11 | COMM CORD ASSEMBLY KIT | 8 | |
| 18028G11 | COMM-CORD ASSEMBLY KIT | 8 | |
| 18920G-04 | MIC ASSEMBLY KIT | 1 | |
| 19286-0370 | Imperium™ Cable Assembly Inspection Gage for Receptacle Harness Assembly Kits for 1/0 and 1 AWG cables, 171466 series. | 1 | |
| 1C6977 | KIT, VSV POSITION LVDT ASSEMBLY | 1 | |
| 1C6977G05 | KIT, VSV POSITION LVDT ASSEMBLY | 1 | |
| 21C7020G03 | PTO DRIVE ASSEMBLY SHIM AND BACKLASH CHECK KIT | 1 | |
| 22607G-01 | OVERHEAD CORD KIT, ASSEMBLY | 9 | |
| 2558743-1 | ASSEMBLY KIT, PISTON & BUSHING | 1 | |
| 2558743-2 | ASSEMBLY KIT, PISTON & BUSHING | 1 | |
| 289905-1/-2 | ROTATING ASSEMBLY BALANCING KIT | 1 | |
| 289905-3 | ROTATING ASSEMBLY BALANCE KIT | 1 | |
| 293353-1 | ASSY/DISASSEMBLY TOOL KIT (8IT) | 1 | |
| 294863-2 | MAINTENANCE STAND ADAPTER KIT HOLDS ENGINE ASSEMBLY IN 287750-1 MAINTENANCE STAND | 1 | |
| 2965A0000-01 | ASSEMBLY FIX (03 PIEZAS) KIT N/P 2965A0000-01 S/N N/A | 1 | |
| 2C14819G01 | KIT ASSEMBLY - COVER, FUEL PUMP AND LINE | 1 | |
| 2C5247G01 | KIT, COMPRESSOR ROTOR SET SCREW ASSEMBLY | 1 | |
| 2C81967G01 | CHILLING, KIT HPC AND HPT ASSEMBLY | 1 | |
| 2C91240G01 | KIT - ASSY/DISASSEMBLY AGB | 1 | |
| 3107326G001 | CIRCUIT BREAKER PULLER KIT ASSEMBLY | 1 | |
| 340-320-402-0 | HAND CRANKING KIT ASSEMBLY | 1 | |
| 3403241-1 | ADJUSTER ASSEMBLY OUTER WING SLING KIT | 1 | |
| 355A95-7500-00 | AIR HYDRAULIC TOOL KIT / HYDRAULIC ACCESSORY ASSEMBLY AS350 / AS355 STANDARD | 1 | |
| 3G6200G02031 | TOOL KIT, SWASHPLATE ASSEMBLY, CASE 1 | 1 | |
| 3G6205G11231 | TOOL KIT, SWASHPLATE ASSY ASSEMBLY | 1 | |
| 3G6205G13831 | TOOL KIT, SWASHPLATE ASS ASSEMBLY (CASE 2) | 1 | |
| 3G6205G15231 | TOOL KIT, SWASHPLATE ASS ASSEMBLY (CASE 1) | 1 | |
| 3G6305G01131 | TOOL KIT,MGB OIL PUMP DISASSEMBLY/ASSEMBLY | 1 | |
| 3G6305G01132 | TOOL KIT, MAIN GEAR BOX OIL PUMP DISASSEMBLY/ASSEM | 1 | |
| 3G6305G01331 | TOOL KIT MAIN GEARBOX ASSEMBLY FREEWHEEL REPLACEME | 1 | |
| 3G6320G02731 | TOOL KIT, MGB OIL PUMP DISASSEMBLY / ASSEMBLY | 1 | |
| 3G6705G06031 | AW139 SWASHPLATE ASSEMBLY TOOL KIT | 1 | |
| 3M 17157 | 3M™ ROTO PEEN ASSEMBLY KIT | 1 | |
| 3M ID 61500098639 | 3M™ ROTO PEEN ASSEMBLY KIT | 1 | |
| 4060KIT | COMPOSI-LOK® RIGHT ANGLE MASTER TORQUE DRIVER ASSEMBLY KIT: 4060KIT (COMPLETE 16 PC KIT) | 1 | |
| 489-102 | TOOL KIT , HYDRAULIC SHOP FOR MLG BRAKE ASSEMBLY | 1 | |
| 489-50 | TOOL KIT (BF GOODRICH - MLG WHEEL DISASSEMBLY)) | 1 | |
| 50017A42-6-0120 | KIT, PURGING HOSE ASSEMBLY, PITOT/STATIC DRAINS | 5 | |
| 50017A43-6-0120 | KIT, PURGING HOSE ASSEMBLY, PITOT/STATIC DRAINS(3 PINS) | 5 | |
| 501098-21 | LOOSE ITEM KIT K2 -UNIT ASSEMBLY | 1 | |
| 51648 | MOTORIZED WHEEL KIT (INCLUDED ASSEMBLY IN CABINET) | 1 | |
| 53-590DBK | DRILL BUSHING ASSEMBLY KIT | 1 | |
| 590-DBK | DRILL BUSHING ASSEMBLY KIT | 1 | |
| 65C38484-43 | KIT ASSY - J2802 BOX ASSEMBLY | 1 | |
| 67906-101 | VOLUME BLOCK AND COVER ASSEMBLY, SURVIVAL KIT | 1 | |
| 682L407 | KIT, VSV POSITION LVDT ASSEMBLY | 1 | |
| 69754-101 | VOLUME BLOCK AND COVER ASSEMBLY, SURVIVAL KIT | 1 | |
| 6F6320G21731 | TOOL KIT, ACTUATOR ASSY DISASSEMBLY | 1 | |
| 6F6510G04431 | TAIL ROTOR SUPPORT BEARING (NEW TDS) ASSEMBLY/DISASSEMBLY TOOL KIT | 1 | |
| 751069-007 | ASSEMBLY - STRAP, 751069-007 (INCLUDED IN C32016 KIT) | 3 | |
| 822-1631-004 | CABLE/KIT ASSEMBLY | 1 | |
| 822-1631−004 | CABLE/KIT ASSEMBLY | 1 | |
| 822−1631−004 | Cable/Kit Assembly | 1 | |
| 831495-1 | LUBE PUMP ASSEMBLY KIT | 1 | |
| 833843-1 | ROTARY ACTUATOR ASSEMBLY DISASSEMBLY KIT | 1 | |
| 846-820-030 | AIRCELLE S.A. ASSEMBLY KIT | 1 | |
| 856A1520 | CHILLING, KIT HPTR & HPCR ASSEMBLY PROCEDURE | 1 | |
| 856A1520G01 | CHILLING, KIT HPTR & HPCR ASSEMBLY PROCEDURE | 1 | |
| 856A1520G02 | Chilling Kit, HPTR and HPCR Assembly Procedure | 4 | |
| 8721PK | CYLINDER ASSEMBLY REPAIR PARTS KIT- MALABAR NOSE TRIPOD JACK | 1 | |
| 8782PK | CYLINDER ASSEMBLY REPAIR PART KITS-35 TONS AXLE JACK | 1 | |
| 8G6230G01331 | TOOL KIT, SWASHPLATE ASSY ASSEMBLY | 1 | |
| 9233 | STRAP ASSEMBLY KIT | 1 | |
| 94126 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) | 1 | |
| 94128 | Cordless Electric Scissor Kit (Description: Complete 7 PC Kit) (Add to cart: Add To Cart) (Description: Standard Blade Assembly) (Add to cart: Contact us to order) (Description: Blade Assembly with Shoe) (Add to cart: Contact us to order) | 1 | |
| 150296 | Kit, Wheel Assembly | 1 | |
| 410595 | WRENCH - TORQUE (ASSEMBLY 410595 IS INCLUDED IN INSTALLATION KITS 411094 AND 426696) | 1 | |
| 410892 | INSTALLATION MONITOR - TRANSDUCER (ASSEMBLY 410892 IS INCLUDED IN INSTALLATION KITS 411094 AND 426696) | 1 | |
| 413987 | INSTALLATION TOOL - NOSE LANDING GEAR (ASSEMBLY 409338-4 IS INCLUDED IN INSTALLTION KIT 411094)(ASSEMBLY 413987 IS INCLUDED IN INSTALLTION KIT 426696) | 1 | |
| 426665 | INSTALLATION TOOL - MAIN LANDING GEAR (ASSEMBLY 409337-4 IS INCLUDED IN INSTALLTION KIT 411094)(ASSEMBLY 426665 IS INCLUDED IN INSTALLATION KIT 426696) | 1 | |
| 1006845 | BLADE CLAMP ASSEMBLY KIT | 3 | |
| 1505305 | Kit, Wheel Assembly | 1 | |
| 2558668 | Piston Assembly Kit | 1 | |
| 2558743 | KIT PISTON ASSEMBLY | 1 | |
| 2558816 | DRIVER ASSEMBLY KIT, OB BEARING CUP REMOVAL | 1 | |
| 2558817 | DRIVER ASSEMBLY KIT, IB BEARING CUP REMOVAL | 1 | |
| 2558899 | Kit, piston assembly | 1 | |
| 2558900 | Kit, piston assembly | 2 | |
| 2558990 | KIT, PISTON ASSEMBLY | 1 | |
| 5000758 | BRAKE ASSEMBLY TOOL KIT | 1 | |
| 439001517 | MODIFICATION KIT ASSEMBLY 3000 | 1 | |
| 439001528 | MODIFICATION KIT ASSEMBLY | 1 | |
| 7000045975 | ROTO PEEN ASSEMBLY KIT | 1 | |
| 956A6320 | KIT - LIFTING - BLADE ASSEMBLY | 1 | |
| 956A7651 | KIT - SLIDE HAMMERS & ADAPTERS - ENGINE ASSEMBLY | 1 | |
| 956A7651G02 | KIT, SLIDE HAMMERS & ADAPTERS - ENGINE ASSEMBLY | 4 | |
| 956A8327 | KIT - LIFTING - BLADE ASSEMBLY | 1 | |
| 956A8609 | KIT FIXTURE - ASSEMBLY LOCKING RING | 1 | |
| 98D52004023001 | R/I KIT ASSEMBLY | 1 | |
| 98D52004023002 | R/I KIT ASSEMBLY | 1 | |
| 98D52004023003 | R/I KIT ASSEMBLY | 1 | |
| 98D52004023004 | R/I KIT ASSEMBLY | 1 | |
| 98F71201006030 | T700 ENGINE BOOTSTRAP KIT ASSEMBLY | 16 | |
| 98V51003000000 | Stopper disassembly kit | 1 | |
| 98V71203001000 | RR engine disassembly kit | 3 | |
| A20004-72 | ASSEMBLY, RIG PIN (ASSEMBLY IS INCLUDED IN A20004 KIT) | 3 | |
| A20004-78 | ASSEMBLY, RIG PIN (ASSEMBLY IS INCLUDED IN A20004 KIT) | 23 | |
| A27093-27 | TEST BOX - TE FLAPS (ASSEMBLY A27093-34 IS INCLUDED IN KIT A27093-27) | 7 | |
| A32007-17 | PROTECTIVE EQUIPMENT - MLG AXLE THREAD (A32098-2 ASSEMBLY INCLUDED IN KIT A32098-1) | 13 | |
| A32098-1 | PROTECTIVE EQUIPMENT - MLG AXLE THREAD (A32098-2 ASSEMBLY INCLUDED IN KIT A32098-1) | 25 | |
| A33003-2 | BREAKOUT BOX ASSEMBLY (-2 IS INCLUDED IN THE A33003-359 KIT) | 5 | |
| A52016-1 | WEDGE TOOL (ASSEMBLY A52016-2 IS INCLUDED IN KIT A52016-1) | 8 | |
| A71011-101 | CABLE ASSEMBLY B767 ENGINE CHG KIT | 5 | |
| AGE11895 | FLUSH KIT ASSEMBLY, END HOUSING | 1 | |
| AGE13094 | TOOL KIT ASSEMBLY | 1 | |
| AGE13196 | END HOUSING FLUSH KIT ASSEMBLY | 1 | |
| AGE13197 | INPUT HOUSING FLUSH KIT ASSEMBLY | 1 | |
| AGE13214 | END HOUSING FLUSH KIT ASSEMBLY | 1 | |
| AT590DBK | DRILL BUSHING ASSEMBLY KIT | 1 | |
| ATI590-DBK | DRILL BUSHING ASSEMBLY KIT | 3 | |
| ATI590DBK | DRILL BUSHING ASSEMBLY KIT | 3 | |
| B-858-011 | MODIFICATION KIT ASSEMBLY | 1 | |
| BOBO2F-1 | IDG KIT FLUID DISPENSER ASSEMBLY | 1 | |
| C10515 | ASSEMBLY REPAIR KIT | 1 | |
| C26007-78 | ASSEMBLY - EXTENDER BOX (INCLUDED IN C26007 KIT) | 6 | |
| C27051-2 | LOCK ASSEMBLY FLAP KIT | 9 | |
| C27051-3 | LOCK ASSEMBLY SLAT KIT | 3 | |
| C32016-10 | HALF - COMPRESSOR ASSEMBLY, C32016-10 (INCLUDED IN C32016 KIT) | 4 | |
| C32016-11 | ASSEMBLY - THREAD PROTECTOR, C32016-11 (INCLUDED IN C32016 KIT) | 2 | |
| C32016-47 | RAM ASSEMBLY, C32016-47 (INCLUDED IN C32016 KIT) | 6 | |
| C32016-5 | ASSEMBLY - SCRAPER LOCK, C32016-5 (INCLUDED IN C32016 KIT) | 7 | |
| C32016-66 | ASSEMBLY - SEAL PULLER, C32016-6 (INCLUDED IN C32016 KIT) | 8 | |
| C32017-10 | ASSEMBLY - UPPER SLEEVE (C32017-10 PART OF KIT C32017-52 AND -53) | 2 | |
| C32017-30 | ASSEMBLY - RAM (C32017-30 PART OF KIT C32017-52 AND -53) | 3 | |
| C32017-4 | ASSEMBLY - SPACER (C32017-4 PART OF KIT C32017-52 AND -53) | 4 | |
| C32017-5 | ASSEMBLY - CARRIER PULLER (C32017-5 PART OF KIT C32017-52 AND -53) | 2 | |
| C32017-52 | ASSEMBLY - SPACER (C32017-4 PART OF KIT C32017-52 AND -53) | 5 | |
| C32017-53 | ASSEMBLY - STRAP (C32017-60 PART OF KIT C32017-52 AND -53) | 17 | |
| C32017-7 | ASSEMBLY - CLAMP, DYNAMIC SEAL (C32017-7 PART OF KIT C32017-52 AND -53) | 2 | |
| C32017-8 | ASSEMBLY - RETAINER, THREAD PROTECTOR (C32017-8 PART OF KIT C32017-52 AND -53) | 2 | |
| C32029-38 | ASSEMBLY - WRENCH ADAPTER (C32029-6, PART OF KIT C32029-38 OR C32029-45) | 6 | |
| C32029-4 | ASSEMBLY - WRENCH ADAPTER(INCLUDED IN C32029-45 KIT) | 3 | |
| C32029-45 | ASSEMBLY - WRENCH ADAPTOR (C32029-31 PART OF KIT C32029-38 OR C32029-45) | 19 | |
| C32029-50 | ASSEMBLY - WRENCH ADAPTER, (INCLUDED IN C32029-45 KIT) | 5 | |
| C32029-52 | ASSEMBLY, WRENCH ADAPTER, C32029-55 (INCLUDED IN C32029 KIT) | 2 | |
| C32029-8 | SLUG DRIVER ASSEMBLY PIN INSTALLATION/REMOVAL KIT MLG | 3 | |
| C32029-87 | ASSEMBLY - WRENCH ADAPTER, C32029-3 (INCLUDED IN C32029 KIT) | 6 | |
| C32060-1 | RESTRAIN AND PIN REMOVAL KIT - LEVER ASSEMBLY, PIVOT PIN, AND LEVER LINK PIN, MAIN LANDING GEAR | 2 | |
| C44001-55 | REMOVAL/INSTALLATION EQUIPMENT - BROADBAND ANTENNA (ASSEMBLY IS INCLUDED IN KIT 44001) | 6 | |
| CFT71003 | BOOTSTRAP KIT ASSEMBLY | 1 | |
| CGGA885014KT | 16 OZ GREASE TUBE ASSEMBLY KIT | 1 | |
| CTE1518PE001 | KIT ASSEMBLY,PROTECTIVE GUIDE - RUDDER | 1 | |
| DAF1050 | ASSEMBLY/DISAMSSEMBLY FIXTURE KIT | 1 | |
| DAPT60-0392-00 | BEARING OUTER RACE PISTON KIT (DISASSEMBLY) | 1 | |
| DAPT60-0394-00 | BEARING OUTER RACE PISTON KIT(ASSEMBLY) | 2 | |
| DLT30PSHA3012 | HEAD ASSEMBLY -12 FOR KIT PERMASWAGE | 9 | |
| DMC1298 | DMC1298 MIL-C-24308 Connector Assembly Repair Kit | 2 | |
| DZZ7279 | FORWARD BEAM ASSEMBLY KIT | 1 | |
| DZZ7312-509 | AFT BEAM ASSEMBLY KIT | 1 | |
| ES125210-1 | APU GAUGE KIT ASSEMBLY | 1 | |
| F16HOSEKIT | HOSE ASSEMBLY KITS TO CONNECT UNIT TO F-16 | 1 | |
| F72786-183 | Adapter Kit Assembly | 2 | |
| F80113-105 | ROLLER SWAGE -KIT REQUIRED FOR B737 ELEVATOR ASSEMBLY AND TAB ASSEMBLY, P/N- 183A0103-1 | 17 | |
| F80113-64 | ROLLER SWAGE -KIT REQUIRED FOR B737 ELEVATOR ASSEMBLY AND TAB ASSEMBLY, P/N- 183A0103-1 | 11 | |
| F80118-5 | BEARING RETENTION/REMOVAL BODY ASSEMBLY (ACCESSORY TO F80118-1 KIT) | 1 | |
| FT1081 | PFTE HOSE ASSEMBLY TOOL KIT | 1 | |
| G32050-1 | HOIST ASSEMBLY KIT | 4 | |
| G32080-1 | BRACKET HOLDING ASSEMBLY AND WRENCH KIT, MACHINED BRACKET, WLG | 2 | |
| G36035-36 | FITTING ASSEMBLY KIT | 13 | |
| G51113 | KIT- SAFETY CABLE ASSEMBLY | 1 | |
| G601R270003-1 | RIGGING KIT ASSEMBLY - CONTROL SURFACE | 6 | |
| G601R276202-27 | KIT-ASSEMBLY PCU SAFETY TOOLS | 9 | |
| G601R760001-1 | ENGINE COMPARTMENT ASSEMBLY KIT (THROTTLE LEVER ALIGNMENT PIN) | 2 | |
| G601R760002-1 | ENGINE COMPARTMENT ASSEMBLY KIT (THROTTLE LEVER ALIGNMENT PIN) | 7 | |
| G71045-1 | HOIST ASSEMBLY - ENGINE CHANGE KIT | 6 | |
| G71045-2 | HOIST ASSEMBLY - ENGINE CHANGE KIT | 5 | |
| G71045-3 | HOIST ASSEMBLY - ENGINE CHANGE KIT | 1 | |
| G71045-39 | HOIST ASSEMBLY - ENGINE CHANGE KIT, 7.5-TON HOIST. | 2 | |
| G71045-4 | HOIST ASSEMBLY - ENGINE CHANGE KIT | 2 | |
| GA111D | STETHOSCOPE OU ROBE - KIT, ULTRASONIC LEAK P/N: B00033 WINDOW BAG ASSEMBLY P/N: J51004-1 INTER "ST6760" OU "ST9999-VB" | 5 | |
| GS23405-1 | KIT, 14RF DRILL ASSEMBLY | 1 | |
| GS23406-1 | DRILL ASSEMBLY KIT | 1 | |
| GS48251 | DESASSEMBLY KIT J PIN | 1 | |
| GSE3200890 | TIRE INFLATOR ASSEMBLY KIT | 1 | |
| HF439 | GAUGE ASSEMBLY KIT | 2 | |
| J24015-23 | ASSEMBLY - HOSE #2, J24015-26 (INCLUDED IN J24015 KIT) | 6 | |
| J28013-1 | HOSE ASSEMBLY KIT | 18 | |
| JWB10000 | WALL BRACKET ASSEMBLY KIT | 1 | |
| K-1061-04 | Kit, Reservoir Assembly | 2 | |
| K-1106 | Kit, Manifold Assembly | 14 | |
| K-1126 | Kit, Repl. Shock Assembly | 1 | |
| K-1146 | Kit, Repl. Shock Assembly | 1 | |
| K-1296 | Kit, Repl. Cradle Assembly (P) | 1 | |
| K-1411 | KIT, WAND ASSEMBLY REPLACEMENT | 5 | |
| K-1434 | Kit, Repl. Shock Assembly | 1 | |
| K-1460 | Kit, Repl. Shock Assembly | 1 | |
| K-1465 | Kit, Repl. Shock Assembly | 1 | |
| K-1494 | Kit, Repl. Head Assembly (P) | 2 | |
| K-1516 | Kit, Repl. Shock Assembly | 3 | |
| K-1566 | Kit, Repl. Head Assembly (P) | 2 | |
| K-1567 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1569 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1570 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1571 | Kit, Repl. Head Assembly | 1 | |
| K-1573 | Kit, Repl. Head Assembly (P) | 2 | |
| K-1574 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1575 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1576 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1577 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1584 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1588 | Kit, Repl. Head Assembly (P) | 2 | |
| K-1589 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1590 | Kit, Repl. Head Assembly (P) | 2 | |
| K-1591 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1592 | Kit, Repl. Head Assembly (P) | 1 | |
| K-1964 | Kit, Repl. Shock Assembly | 1 | |
| K-1966 | Kit, Repl. Shock Assembly | 1 | |
| K-2306 | KIT, REPL. BEARING ASSEMBLY | 2 | |
| K-2399 | KIT, FRONT AXLE ASSEMBLY | 1 | |
| K-2728 | NOSE ADAPTER ASSEMBLY KIT | 1 | |
| K-2730 | KIT, MAIN ADAPTER ASSEMBLY (P) | 1 | |
| K-3729 | KIT, DUNLOP RIM ASSEMBLY | 2 | |
| K-4126 | KIT, AXLE ASSEMBLY ADAPTER | 2 | |
| K-4196 | KIT, RAM ASSEMBLY (P) | 1 | |
| K-4863 | KIT: SHEAR PIN,ASSEMBLY, | 1 | |
| K-5062 | KIT, BATTERY TRAY ASSEMBLY | 2 | |
| K1411 | KIT: WAND ASSEMBLY, | 5 | |
| K1460 | KIT: SHOCK ASSEMBLY, | 1 | |
| K1516 | KIT: SHOCK ASSEMBLY, | 3 | |
| K1566 | KIT: REPLACE,HD ASSEMBLY, | 2 | |
| K1667-01 | KIT: CN CNTRL,10 GPM ASSEMBLY, | 2 | |
| K20009-14 | Pin - Rig (K20009-3 Assembly Included in Kit K2000 | 9 | |
| K2084 | KIT: REPLACE,WHEEL ASSEMBLY, | 1 | |
| K2282 | KIT: CRADLE ASSEMBLY, | 1 | |
| K26001-1 | ASSEMBLY - SEALING CAP (ASSEMBLY IS INCLUDED IN KIT K26001) | 4 | |
| K28005-1 | ADAPTER - PRESSURE RELIEF VALVE (ASSEMBLY K28005-12 IS INCLUDED IN KIT K28005-1) | 9 | |
| K3215 | CARBON BRUSH ASSEMBLY KIT | 9 | |
| K3485 | BEARING CAP ASSEMBLY KIT - PLEASE SEE OH KIT PRICE | 6 | |
| K3630 | Bearing Cap Assembly Kit | 2 | |
| K3701 | KIT CYLINDER ASSEMBLY REPLACEMENT | 3 | |
| K3969 | KIT: SHEAR PLATE,ASSEMBLY, | 1 | |
| K4123 | KIT: ADAPTER,ASSEMBLY, FALCON X JP | 1 | |
| K4126 | KIT: ADAPTER,AXLE,ASSEMBLY | 2 | |
| K80113-107 | BODY ASSEMBLY ROLLER SWAGE KIT | 1 | |
| LTCT30322-01 | Kit, Installation Support Assembly, Fan Module | 1 | |
| M.SHOP-KIT | ASSEMBLY/DISASSEMBLT KIT (M. SHOP USE 9 IT) | 1 | |
| MG174-04 | DISASSEMBLY TOOL KIT | 35 | |
| MIL1065 | INFLATOR ASSEMBLY KIT | 1 | |
| MIT113W2655-1 | KIT ASSEMBLY | 1 | |
| MITSM112T5435-1 | BUSHING KIT ASSEMBLY | 1 | |
| MK7-ATIS-002 | INFLATOR ASSEMBLY KIT | 6 | |
| MK7ATIS | INFLATOR ASSEMBLY KIT | 2 | |
| MK7ATIS-002 | INFLATOR ASSEMBLY KIT | 6 | |
| OM590DBK | DRILL BUSHING ASSEMBLY KIT | 1 | |
| PS-1229L | GAGE ELEMENT (INFLATOR ASSEMBLY KIT) | 1 | |
| PWA107574 | KIT PRESERVATION ENGINE ASSEMBLY OIL SYSTEM | 1 | |
| PWA85675 | KIT-RIGGING PINS ENGINE ASSEMBLY | 7 | |
| PWA86335 | KIT-RIGGING PINS ENGINE ASSEMBLY | 1 | |
| RB T101261-101 | TUBE ASSEMBLY, BLADE FOLD KIT | 1 | |
| RB429WA-MM-76-10-1-3 | PLA Gearbox Assembly Work Aid Kit #1 | 1 | |
| RBT18004 | Main Rotor Hub Assembly Work Aid Kit | 2 | |
| RBT18005 | Tail Rotor Hub Assembly Work Aid Kit | 2 | |
| RBT18008 | Mast Assembly Work Aid Kit | 2 | |
| RBT18009 | Transmission Assembly Work Aid Kit | 2 | |
| RBT18010 | Drive Link Assembly Work Aid Kit | 2 | |
| RBT18011 | Fan Shaft Assembly Work Aid Kit | 2 | |
| RBT18012 | Tail Rotor Pitch Horn Assembly Work Aid Kit | 2 | |
| RBT18013 | Swashplate and Support Assembly Work Aid Kit | 2 | |
| RBT18016 | Idler Link Assembly Bushing Removal Work Aid Kit | 2 | |
| RBT18019 | PLA Gearbox Assembly Work Aid Kit | 2 | |
| RBT18502 | 407 Restraint Sprag Assembly Repair Kit | 2 | |
| RBW6205G11231-3G | AW139 Swashplate Assembly Tool Kit | 2 | |
| RBW6205G15231-3G-3G | TOOL KIT, SWASHPLATE ASSY ASSEMBLY | 1 | |
| RBW6305G01132-3G | Tool Kit, Main Gear Box Oil Pump Disassembly/Assembly | 2 | |
| RBW6305G01331-3G | TOOL KIT MAIN GEARBOX ASSEMBLY FREEWHEEL REPLACEMENT | 2 | |
| RBW6510G04431-6F | NEW STYLE TAIL ROTOR SUPPORT ASSEMBLY/DISASSEMBLY TOOL KIT | 2 | |
| RRT084298 | LIFTING STRAP ASSEMBLY KIT | 1 | |
| S1357-5A | CRIMP TOOL ASSEMBLY KIT | 3 | |
| SB06-752B-80 | STRAIGHT NOSE ASSEMBLY KIT | 2 | |
| SB‐117D2‐53‐005‐2C1 | TAIL BOOM ASSEMBLY (TDS) FAIRING ANGLES - KIT 1 | 1 | |
| SB‐117D2‐53‐005‐2C2 | TAIL BOOM ASSEMBLY (TDS) FAIRING ANGLES - KIT 2 | 1 | |
| SG-1163788 | ZEPHYR TORQUE DRIVER ASSEMBLY KIT | 1 | |
| SP-0786 | PORT SEAL ASSEMBLY KIT, O-RING SP-0786 | 1 | |
| SVT270BRK | PUMP HEAD ASSEMBLY REPAIR KIT | 1 | |
| T-100 | SLICK MAGNETO ASSEMBLY AND TIMING KIT | 5 | |
| T100 | Champion Slick T-100 Assembly and Timing Kit | 5 | |
| T101261-101 | TUBE ASSEMBLY, BLADE FOLD KIT | 1 | |
| TAM8098A | ASSEMBLY AND DISASSEMBLY KIT OF CONNECTING ROD JITS FOR 360 ENGINES | 1 | |
| TAM8098B | KIT OF ASSEMBLY AND DISASSEMBLY OF CONNECTING ROD BARRELS FOR 520 ENGINES | 1 | |
| TAM8118G | ASSEMBLY AND DISASSEMBLY KIT OF ROCKER TRUCKS FOR 520 ENGINES | 1 | |
| TAM8118J | ASSEMBLY AND DISASSEMBLY KIT OF ROCKER TRUCKS FOR 360 ENGINES | 1 | |
| TEKIT-5085 | Lower Gimbal lug Assembly Inspection Kit, NDT616,NDT616P,TC5-185T, 1150 Case | 1 | |
| TWS011102 | ASSEMBLY CAP RETRO KIT | 1 | |
| Z-3275 | Kit, Nose Adapter Assembly | 1 | |
| PWA85675 | KIT RIGGING PINS ENGINE ASSEMBLY | 7 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
