| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 476410 | AMP TOOL | 6 | |
| 525691 | AMP TOOL | 4 | |
| 571-525691 | AMP TOOL | 1 | |
| 69814 | AMP TOOL | 2 | |
| 576778 | AMP TOOL | 9 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 201137-CA | PROPELLER LIFTER -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| (CALIB) 341206-29 | BOOSTRAP -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECHNICAL RE | 1 | |
| (CALIB) 98D71203501002 | BOOSTRAP A-320 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| (CALIB) 98S71000003001 | ENGINE SLING -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECHNICA | 1 | |
| (CALIB) 98S71003000002 | FIXTURE ENG/PROP R/I -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | 1 | |
| (CALIB) C71003-247 | BOOTSTRAP KIT CFM56-3 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A | 1 | |
| (CALIB) M6458-1 | BOOSTRAP A-320 -PERFORM MAGNETIC PARTICLE INSPECTION OF STRUCTURAL COMPONENTS, WELDING JOINTS, CLAMPING PINS, SHACKLES, AND PINS OF THE EQUIPMENT -PERFORM LOAD TESTS, CERTIFICATION OF ALL TOOL PINS, CHANGE OF WHEELS TO THE PACKAGING BOXES -ISSUE A TECH | 1 | |
| 001901-001-00 | PREN TOOL -TIGHTENING CONE AMP 1900 | 8 | |
| 012A0045-1 | DRILL/REAM/CLAMPING TOOL KIT | 1 | |
| 02-906 | LENS AND LAMP REMOVAL TOOL | 2 | |
| 0412-001 | OIL SAMPING TOOL TGB/1GB | 1 | |
| 06-5022-6C00 | TOOL, SHIMMY DAMPER FLUID UNIT (CE) | 9 | |
| 07-3001-4900 | Fuel Sample Test Tool | 12 | |
| 07-3006-6900 | Fuel Sample Test Tool | 12 | |
| 07-3007-6900 | FUEL SAMPLE TEST TOOL | 8 | |
| 07-3008-6900 | FUEL SAMPLE TOOL | 10 | |
| 07-3009-6900 | TEST TOOL FUEL SAMPLE | 4 | |
| 0849-480-914 | RAMP TEST UNIT TOOL | 1 | |
| 0U141840 | EXTRACTOR CLAMP TOOL | 1 | |
| 0U191191 | CHECKING TOOL-BALL SCREW CLAMP-HRZ SBTLZR | 20 | |
| 0UT74 | TOOL - LAMP CAPSULE EXTRACTION | 7 | |
| 1-231666-0 | TOOL KIT;MOD-PLUG 4-6 & 8 POS | 1 | |
| 1-790112-5 | TOOLING KIT; AMP STACK MARK IV | 1 | |
| 100-0128-04 | FUEL SAMPLING TOOL | 5 | |
| 1098 | CLAMP TOOL | 1 | |
| 110-0430-100-02 | SPECIAL TOOLS ALTIMETER TEST & PITOT STATIC | 5 | |
| 114-1230 | GREASE SEAL INSPECTION TOOL W/ CLAMP KNOB AND BOLT RETAINER | 4 | |
| 11C4113 | DAMPER HOUSING FLOW CHECK TOOL (ENGLISH) | 1 | |
| 11C4113G02 | DAMPER HOUSING FLOW CHECK TOOL (FLOW CHECK TOOL) | 1 | |
| 11C4121 | CARBON SEAL RAMP TOOL (ENGLISH) | 1 | |
| 11C4121G02 | TOOL, CARBON SEAL RAMP | 1 | |
| 11S25110223 | LAMP EXTRACTOR TOOL | 1 | |
| 12" G-CLAMP | 12" G CLAMP TOOL | 1 | |
| 12-04763 | SNOOPY TOOL AMPCO ALRB | 1 | |
| 12145-003-001 | GAS STRUT DAMPER SERVICE TOOL | 1 | |
| 139W00-403-32 | CLAMPING TOOL | 1 | |
| 1583660-1 | AMP CRIMP TOOL | 1 | |
| 1583660-2 | AMP CRIMP TOOL | 1 | |
| 160200-9Z000 | SPRING CLAMP TOOL L/H | 12 | |
| 160200-9Z003 | SPRING CLAMP TOOL R/H | 12 | |
| 1752787-1 | HEAD/CYLINDER, CRIMPING TOOL (TYCO ELECTRONICS CORP. (FORMERLY AMP, INC.)) | 8 | |
| 17A122-281 | SHAMPOO TOOL | 2 | |
| 17A122-301 | SHAMPOO TOOL | 2 | |
| 17G110640-1 | TOOL, RIGGING - RAMP LOCKING MECHANISM | 1 | |
| 1804030-1 | REMOVAL TOOL AMP/TYCO | 3 | |
| 189727-1 | (AMP) REMOVAL TOOL | 8 | |
| 1901611-1 | CRIMPING TOOLS (AMP BRAND) | 7 | |
| 1901611-2 | CRIMP TOOL AMP | 7 | |
| 1C8003 | TOOL SET, INLET GEARBOX ASSY & DIS-ASSY | 1 | |
| 2" G-CLAMP | G CLAMP TOOL | 1 | |
| 2-231652-0 | AMP MODULAR PLUG HAND TOOL | 3 | |
| 208-116 | PITOT COVERS w/telescoping install tool (for amphib's) (set of 3) | 1 | |
| 22-530 | TOOL - LAMP CAPSULE EXTRACTION | 2 | |
| 220009-1 | CRIMP TOOL AMP 220009-1 O0103 | 1 | |
| 220015-1 | CRIMPING TOOL-AMP | 14 | |
| 220015-2-h | AMP Crimp Tool | 1 | |
| 220015-3 | CRIMP TOOL AMP 220015-3 O0106 | 1 | |
| 220016-5 | AMP CRIMP TOOL | 5 | |
| 220045-2 | CRIMP TOOL AMP 220045-2 P0202 | 5 | |
| 220045-3 | CRIMP TOOL AMP 220045-3 O0106 | 1 | |
| 224-3748 | CLAMP METER TOOL | 1 | |
| 2305781-1 | CRIMP TOOL AMP 90131-4 P0202 | 1 | |
| 231648-1 | CRIMP TOOL AMP 231648-1 | 1 | |
| 23W00109975456 | CLAMP TOOL | 1 | |
| 25-9Y215-1A | TOOL - FUEL SAMPLING | 1 | |
| 25-9Y385-1A | FUEL SAMPLING TOOL | 7 | |
| 269A3162-3-MT-1-1-12 | Piston Guide Damper Tool | 1 | |
| 269A3162-3-MT-1-1-20 | Piston Guide Damper Tool | 1 | |
| 269A6300-80901 | Landing Gear Damper Overhaul Charging Tool Complete | 1 | |
| 269A9297 | Tool Block Landing Gear Damper Strut Assembly | 1 | |
| 277-1T1 | TOOL, COMPRESSOR HOLDING CLAMP | 1 | |
| 28-0-4106 | FLUTTER DAMPER FILLING TOOL | 1 | |
| 289487-1 | Nut Clamping Tool | 1 | |
| 2C6563 | TOOL, INSTALL/REMOVE-HPT DAMPER SLEEVE | 1 | |
| 2C6563G01 | TOOL, INSTALL/ REMOVE - HIGH PRESSURE TURBINE DAMPER SLEEVE | 1 | |
| 2C6563G01 | TOOL, INSTALL/REMOVE-DAMPER | 1 | |
| 2C7085 | TOOL,CLAMP-COMPRESSOR ROTOR AI | 1 | |
| 2C7085G01 | TOOL,CLAMP-COMPRESSOR ROTOR AI | 1 | |
| 2ME65-72761 | CLAMP TOOL | 1 | |
| 2ME65-72761-200 | MLG OLEO LOCK CLAMP STRUT TOOL | 1 | |
| 3" G-CLAMP | 3 INCH CLAMP TOOL | 1 | |
| 300-0002-00 | LAMP REMOVAL TOOL | 2 | |
| 31-50740 | MLG SERVO DAMPER RIG TOOL | 1 | |
| 3119A0000-01 | TOOL-STAMPING | 1 | |
| 332A93-3112-00 | DAMPER BRIDGE HAFTING TOOL | 1 | |
| 332A93-3193-00 | DAMPER SUPPORT TOOL | 1 | |
| 332A94-2780-01 | LATERAL DAMPER INSPECTION TOOL | 1 | |
| 35-92119-0001 | RAMP LOCK CYLINDER RIGGING TOOL | 1 | |
| 35-92119-0003 | Ramp Lock Cylinder Rigging Tool | 1 | |
| 350A93-3232-00 | TOOL, SEAL & SEAL HOLDER REPLACEMENT | 1 | |
| 350A95-3200-00 | OIL SAMPLING TOOL | 1 | |
| 350A95-3200-00/PHP | SAMPLING TOOL SET OIL | 1 | |
| 350A95320000 | SAMPLING TOOL SET OIL | 1 | |
| 369D26300-80901 | LANDING GEAR DAMPER OVERHAUL CHARGING TOOL COMPLE | 1 | |
| 3G1205G00231 | MAIN ROTOR DAMPER OIL FILLING ADAPTER TOOL | 2 | |
| 3G6205G05951 | TOOL, M/R DAMPER ROD-END;REM/INSTL.(GF-07-00) | 1 | |
| 3G6205G21631 | M/R DAMPER REMOVAL TOOL | 1 | |
| 3G6205G2163L | TOOL KIT, M/R DAMPER ATTACHMENT BOLT REM | 1 | |
| 3G6405G00531 | TOOL, TAIL ROTOR DAMPER LENGTH ADJUST | 1 | |
| 3G6405G02131 | TOOL, T/R BLADE DAMPER ATTACH. BUSHING REM. | 1 | |
| 3MIT65B04012 | MISCELLANEOUS TOOL - NOSE GEAR QUADRANT CLAMP | 1 | |
| 3OHME65B00162-950 | OVERHEAD EQUIPMENT - CLAMP AND HOISTING TOOL - NOSE GEAR | 1 | |
| 3S | TOOLS CLAMP | 2 | |
| 4" G-CLAMP | 4 INCH CLAMP TOOL | 1 | |
| 4065572-901 | MAIN GEAR ALIGNMENT TOOL - LOAD SENSOR ALIGNMENT CLAMPS (OVAL) | 1 | |
| 4065575-901 | TOOL / CLAMP | 1 | |
| 412-240-011-103 | CLAMP TOOL | 1 | |
| 412-240-012-101 | CLAMP ASSY,TOOL BACK | 1 | |
| 42594-1075 | TOOL-CLAMP, ELECT BRAKE ACTUATOR | 1 | |
| 43978-1 | AMP CRIMP TOOL | 1 | |
| 45219-2 | CRIMP TOOL - AMP (D.A.H.T. CES ECV-ECN 18-10) | 5 | |
| 45219-2-ND | CRIMP TOOL - AMP (D.A.H.T. CES ECV-ECN 18-10) | 1 | |
| 45241-2-J | AMP CRIMP DIE TOOL | 1 | |
| 46073 | CRIMP TOOL AMP | 5 | |
| 46447 | CRIMP TOOL AMP | 13 | |
| 465195-1 | AMP-LEAF EXTRACTION TOOL | 1 | |
| 46673 | AMP Crimp Tool | 13 | |
| 46673-1 | AMP CRIMPING TOOL | 6 | |
| 46866 | CRIMP TOOL AMP 46866 O0105 | 1 | |
| 46988 | AMP CRIMP TOOL | 20 | |
| 47322 | AMP DIE TOOL | 3 | |
| 47386 | AMP Crimp Tool | 19 | |
| 47386-4 | AMP CRIMPING TOOL | 3 | |
| 47386-5 | HAND TOOL PIDG 22-16 - TE CONNECTIVITY / AMP | 2 | |
| 47386-R | AMP CRIMPING TOOL | 1 | |
| 47387 | AMP CRIMPING TOOL | 13 | |
| 47387-R | AMP CRIMPING TOOL | 1 | |
| 47907-1 | CRIMP TOOL AMP47907-1 | 8 | |
| 482930-1 | CRIMP TOOL AMP 482930-1 O0106 | 1 | |
| 484364-1 | AMP-HAND CRIMPING TOOL (67978.1) | 1 | |
| 48698 | AMP Crimp Tool | 1 | |
| 49-500-19 | FINE & COARSE TOOL HOLE SAWS (DIMENSIONS | 6 | |
| 4920-99-617-1768 | CLAMPING TOOL | 1 | |
| 49512 | CRIMP TOOL AMP 49512 O0107 | 1 | |
| 49935 | AMP CRIMP TOOL | 14 | |
| 49965 | CRIMP TOOL AMP 49965 O0107 | 8 | |
| 50445 | MCP LAMP CHANGE TOOL | 1 | |
| 558-1-05785 | NAMEPLATE CLAMPING TOOL | 1 | |
| 571-69959 | HHHT AMPLI-BOND CRIMP TOOL | 1 | |
| 57201A4255 | BEAD REFORMING TOOL-JANITROL TYPE CLAMP | 1 | |
| 57252-5100 | Clamp Tool For MIL IDT Connector | 1 | |
| 58078-3 | AMP Crimp Tool | 6 | |
| 58325-1 | CRIMP TOOL AMP 58325-1 O0105 | 1 | |
| 58433-3 | CRIMP TOOL - DINOSUAR AMP (PRO CR ASSY, RBY IS9252) | 6 | |
| 58433-3 | CRIMP TOOL - DINOSUAR AMP (PRO CR ASSY, RBY IS9252) | 6 | |
| 58508-1 | AMP HAND CRIMPING TOOLS | 1 | |
| 58530-1 | AMP PRO-CRIMPER HAND TOOL II | 1 | |
| 58551-1 | AMP PRO-CRIMPER HAND TOOL ASSY | 1 | |
| 58573-1 | AMP CRIMPING TOOL | 3 | |
| 58T-101 | TOOL, LAMP CAPSULE EXTRACTION | 11 | |
| 59239-4 | AMP Crimp Tool | 24 | |
| 59250 | CRIMPING TOOL AMP T-HEAD 59250 | 18 | |
| 59275 | AMP CRIMP TOOL | 13 | |
| 59300 | TE Connectivity 59300 AMP Red-Blue-Yellow Terminal Crimp Tool Head | 1 | |
| 59461 | AMP Crimp Tool | 14 | |
| 59500 | AMP THERMASHIELD CRIMP & DIES TOOL | 6 | |
| 59824-1 | AMP CRIMPING TOOL | 6 | |
| 59973-1 | CRIMP TOOL AMP 59973-1 | 8 | |
| 59974-1 | CRIMP TOOL AMP | 13 | |
| 6" G-CLAMP | 6 INCH CLAMP TOOL | 1 | |
| 600-058 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 7 | |
| 601-100 | METAL CLAMP TIGHTENING HAND TOOL | 2 | |
| 61-9740.0 | LAMP REMOVAL TOOL | 1 | |
| 620-882-808-0 | INSTALLATION TOOL FOR BAND CLAMP | 1 | |
| 6207A701-2650 | DAMPING PISTON INSTALLATION TOOL | 1 | |
| 629A050-A | HYDRAULIC OIL SAMPLING TOOL | 1 | |
| 63819-9600 | Hand Crimp Tool For Projector Lamp Plug and Receptacle Terminal | 1 | |
| 654174-1 | CRIMP TOOL AMP 654174-1 | 8 | |
| 654174-1-ND | AMP CRIMPING TOOL | 2 | |
| 656075-1 | AMP CRIMP TOOL | 3 | |
| 68920-704-1 | LAMP HOLDER REMOVAL AND INSTALLATION TOOL | 1 | |
| 7032 | SHIMMY DAMPER FILLING TOOL | 2 | |
| 69015 | AMP CRIMP TOOL | 4 | |
| 69064 | AMP CRIMPING TOOL | 2 | |
| 69066 | ASSEMBLY - HEAD/CYLINDER, CRIMPING TOOL (TYCO ELECTRONICS CORP. (FORMERLY AMP, INC.)) | 5 | |
| 69099 | CRIMPING TOOLS DYNA-CRP AMPWR 2 | 8 | |
| 69120 | AMP CRIMPING TOOL | 1 | |
| 69710 | CRIMPING TOOL AMP69710 | 1 | |
| 69959 | HHHT AMPLI-BOND CRIMP TOOL | 4 | |
| 102581 | INFRARED HEATLAMP TOOL | 1 | |
| 169400 | AMP TOOL CRIMP Certi-lok inc 169404 | 8 | |
| 169485 | AMP Crimp Tool | 3 | |
| 260144 | Tool Clamp for EZ-30T Arm (P2) | 1 | |
| 260145 | Tool Clamp for EZ-30T Arm (P3) | 1 | |
| 260146 | Tool Clamp for EZ-30T Arm (P4) | 1 | |
| 260184 | Tool Clamp for EZ-70IT Arm (P1) | 1 | |
| 260185 | Tool Clamp for EZ-70IT Arm (P3) | 1 | |
| 260186 | Tool Clamp for EZ-70IT Arm (P4) | 1 | |
| 260187 | Tool Clamp for EZ-120IT & 200IT Arm (P1) | 1 | |
| 260188 | Tool Clamp for EZ-120IT Arm (P3) | 1 | |
| 260189 | Tool Clamp for EZ-120IT Arm (P4) | 1 | |
| 260243 | Quick Release Tool Clamp (for EZ-30T, EZ-25, EZ-40, EZ-25R, EZ-40R arms) | 1 | |
| 305183 | PIN REMOVAL TOOL AMP | 7 | |
| 525690 | RED AMP CRIMP TOOL | 6 | |
| 525692 | AMP Crimp Tool | 5 | |
| 525693 | AMP Crimp Tool | 3 | |
| 576778 | CRIMPING TOOL AMP 576778 | 9 | |
| 576779 | CRIMPING TOOL AMP 576779 | 13 | |
| 576780 | CRIMPING TOOL AMP 576780 | 10 | |
| 576781 | AMP Crimp Tool | 11 | |
| 576782 | AMP Crimp Tool | 12 | |
| 576784 | AMP CRIMPING TOOL | 12 | |
| 681022 | READOUT LAMP REMOVAL TOOL | 1 | |
| 1410118 | CLAMP CRIMPING TOOLS | 1 | |
| 4066608 | LAMP REPLACEMENT TOOL | 2 | |
| 14100118 | CLAMP CRIMP TOOL | 1 | |
| 20454141 | SPECIAL TOOL CLAMP | 1 | |
| 460006804 | SHIMMY DAMPER BLEEEDTOOL TOOL | 27 | |
| 00610100000 | SIM MODULE EXTRACTION TOOL AMPHENOL PCD 00610100000 | 4 | |
| 69272-1 | CRIMP TOOL - AMP (SAHT SPARE WIRE CAP .036 - .138) | 8 | |
| 696202-1 | AMP HAND CRIMPER, SUPER CHAMP HAND TOOL | 1 | |
| 69692-1 | CRIMP TOOL AMP 69692-1 | 4 | |
| 69710-1 | CRIMP TOOL - AMP (SAHT W/OUT DIES) | 13 | |
| 69710-1-E | CRIMP TOOL AMP 69710-1-E | 1 | |
| 6F6220G04831 | TOOL KIT M/R DAMPER REMOVAL-INSTALLATION | 1 | |
| 6F6220G08131 | INBOARD DAMPER ATTACHMENT REMOVAL TOOL | 1 | |
| 6F6220G08132 | INBOARD DAMPER ATTACHMENT REMOVAL TOOL | 1 | |
| 70307-03050-018 | FUEL SAMPLING TOOL | 1 | |
| 70700-77306-041 | DAMPER ROD END BEARING REMOVE / INSTALL TOOL | 1 | |
| 720781-3 | SUPER CHAMP SERVICE TOOL ASSY | 1 | |
| 757-ACOUSTIC-CLAMP | RB211 ACCOUSTIC LINER CLAMP TOOL | 1 | |
| 768340-1 | UNIV HAND TOOL KIT AMPLATCH | 1 | |
| 790131-3 | AMP STACK TOOLING KIT | 1 | |
| 8-1579002-0 | AMP HAND CRIMPER, SUPER CHAMP HAND TOOL | 1 | |
| 80-304848-01LM | YAW DAMPER COUPLER SIM.LMTOOL* | 1 | |
| 817-325 | AMP CERTI-LOK CRIMP TOOL | 1 | |
| 825508-5 | AMPLIVERSAL CRIMPING TOOL ASI | 1 | |
| 83-262 | CLAMP TOOL | 2 | |
| 83760341 | POSITIONING AND CLAMPING TOOL | 1 | |
| 83760381 | POSITIONING AND CLAMPING TOOL | 1 | |
| 851-30486-510 | EXTRACT LAMP CAPSULE TOOL | 13 | |
| 8511-FE188-110 | REGULATOR TOOL DAMPER ATR/F0221 | 1 | |
| 856A1063G05 | TOOL - SET COMPR STATOR SECTORS & LINERS | 3 | |
| 856A1063G06 | TOOL-SET COMPR STATOR SECTORS & LINERS INSTALLA | 5 | |
| 856A1071G05 | TOOL SET,REMOVAL - COMPR STATOR LINERS & | 2 | |
| 856A1456 | TOOL, REMOVAL - HPT ROTOR BLADES AND DAMPERS (REMOVAL TOOL) | 1 | |
| 856A1456G02 | Tool, Removal - HPT Rotor Blades and Dampers (removal tool) | 5 | |
| 856A3573 G03 | Stool Assy/Disassy ‐ 1 & 2 Bearing Support | 13 | |
| 856A3948G01 | CLAMP TOOL - FAN BLADE SPACERS | 2 | |
| 8811 937 000/PHP | CLAMPING TOOL AND WRENCH | 1 | |
| 90045 | CRIMPING TOOL TYPE F (AMP INC) | 2 | |
| 8811937000 | CLAMPING TOOL AND WRENCH | 2 | |
| 8813 959 000/PHP | CLAMPING TOOL AND CENTERING WRENCH | 1 | |
| 8813959000 | CLAMPING TOOL and CENTEREING WRENCH | 1 | |
| 8818837000 | GEAR CLAMPING TOOL | 2 | |
| 70307003050 | FUEL SAMPLING TOOL | 1 | |
| 895-3101-35-107 | DAMPER BEARING TOOL | 1 | |
| 8AT.9101.470 | TOOLS REMOVE VIB DAMPER | 1 | |
| 8C3254 | SEATING TOOL RING - NO 3 DAMPER HSG ASSY | 1 | |
| 8C3278 | FLOW CHECK TOOL - DAMPER HSG | 1 | |
| 8G6220G01931 | M/R DAMPER ATTACHMENT BOLT REMOVAL TOOL | 1 | |
| 8G6220G03431 | TOOLKIT, M/R DAMPER ATTACHING .BOLT REMOVAL | 1 | |
| 8G6220G03631 | TOOL KIT, M/R DAMPER ATTACHING BOLT REMOVAL (GK-25-00) | 1 | |
| 8G6430G02931 | TOOL,T/R BLADE DAMPER ATTACHMENT BUSHING REMOVAL | 1 | |
| 8G6430G09631 | TAIL ROTOR DAMPER INSPECTION TOOL | 1 | |
| 8PE455160-20 | TOOL ADJUSTMENT READING LAMP | 6 | |
| 8T-101 | TOOL-LAMP CAPSULE EXTRACTION | 1 | |
| 90009-8 | AMP Crimp Tool | 3 | |
| 90045 TYPE F | CRIMPING TOOL (AMP INC) | 1 | |
| 90090-2 | AMP TAB size range 26-18 AWG. This tool also performs the same function as 90090-3. | 2 | |
| 90123-4 | CRIMPING TOOL TYPE F (AMP INC) | 1 | |
| 90123-4 TYPE F | CRIMPING TOOL (AMP INC) | 1 | |
| 90131-4 | CRIMP TOOL AMP 90131-4 P0202 | 1 | |
| 90166-1 | CRIMP TOOL AMP | 2 | |
| 90300-2 | CRIMP TOOL AMP 90300-2 O0107 | 5 | |
| 90302-1 | CRIMP TOOL - TE (SAHT AMPLIMITE 28-20) | 1 | |
| 90390-3 | CRIMP TOOL AMP 90390-3 | 3 | |
| 90711-2 | CRIMP TOOL AMP | 1 | |
| 90800-1 | CRIMP TOOL AMP 90800-1 (FRAME 354940-1) | 2 | |
| 90869-1 | CRIMP TOOL - AMP (PROCRMP TL W/DIE COMM .062 P/S) | 1 | |
| 91-066-1 | AMP EXTRACTION-INSERTION TOOL | 11 | |
| 91-066-2 | AMP EXTRACTION-INSER- TION TOOL | 1 | |
| 91-066-3 | AMP EXTRACTION-INSER- TION TOOL | 10 | |
| 91039-1 | AMP INSERT/EXT TOOL | 1 | |
| 91066-1 | AMP EXTRACTION-INSERTION TOOL | 11 | |
| 91066-1 (M8 1969/1 1-01) | AMP installing /removal tool | 1 | |
| 91066-3 | AMP EXTRACTION-INSER- TION TOOL | 10 | |
| 91066-3 (M8 1969/1-03) | AMP installing /removal tool | 1 | |
| 91067-2 (M8 1969/1-02) | AMP installing /removal tool | 1 | |
| 91084-1 | REMOVAL TOOL AMP P/N 91084-1 | 3 | |
| 91417-1 | TOOL; KEYING (AMPMODU MTE) | 1 | |
| 91507-1 | CRIMP TOOL AMP 91507-1 | 4 | |
| 91510-1 | CRIMP TOOL AMP 91510-1 (TRA - CX2053AV) | 5 | |
| 91522-1 | CRIMP TOOL - AMP (CERTICRIMP 2,SAHT MINI UMNL) | 11 | |
| 95-92191-0001 | UNLOCKING TOOL, LATCHING MECHANISM RAMP DOOR. | 1 | |
| 95-92191-0003 | UNLOCKING TOOL, LATCHING MECHANISM RAMP DOOR | 1 | |
| 956A1719 | TOOL SET - ALIGN AND CLAMP CDN | 1 | |
| 97F57508260000 | CLAMP TOOL | 6 | |
| 9809800002 | TOOL, VISE CLAMP -DVDR | 1 | |
| 98A22103500000 | AUTO PILOT/YAW DAMPER HARNESS TOOL | 1 | |
| 98A27103002000 | LOCKING CLAMP TOOL | 6 | |
| 98A27604007000 | SPOILER CLAMP TOOL | 3 | |
| 98A28104000000 | FUEL SAMPLE TOOL | 37 | |
| 98A32101508000 | TOOL: CLAMP HOISTING 5100 | 5 | |
| 98A54403021000 | TOOL-CLAMPING,SHACKLE REMOVAL,RIB18 | 2 | |
| 98D27207549000 | RUDDER RIG PIN YAW DAMPER TOOL | 31 | |
| 98D27504081000 | FLAP ADJ TOOL TRACK 2&3 | 16 | |
| 98D27804001000 | DRIVE SLAT & FLAP LOCKING TOOL | 29 | |
| 98D52307525000 | WATER DRAIN SAMPLING TOOL | 24 | |
| 98D53103025000 | MLGD DRILLING CLAMP TOOL | 1 | |
| 98D71203501205 | CENTRE HINGE CLAMP TOOL | 2 | |
| 9C3133G01 | REMOVAL TOOL - CLAMP ASSEMBLY, HORIZONTAL DRIVE SHAFT | 1 | |
| 9C3133G02 | Removal Tool - Clamp Assembly, Horizontal Drive Shaft | 1 | |
| 9XB285027-01 | TOOL LAMP CHANGING | 2 | |
| A-305183 | REMOVAL TOOL 18 AND 20 GAGE AMP RECTANGULAR PLUGS. | 1 | |
| A12001 | FUEL SAMPLING TOOL | 1 | |
| A12001-1 | FUEL SAMPLING TOOL | 3 | |
| A12001-10 | FUEL SAMPLING TOOL | 1 | |
| A12001-12 | FUEL SAMPLING TOOL | 1 | |
| A12001-14 | FUEL SAMPLE TOOL | 17 | |
| A12001-15 | TOOL SAMPLING EQUIP | 15 | |
| A12001-17 | FUEL SAMPLING TOOL | 1 | |
| A12001-2 | FUEL SAMPLING TOOL | 1 | |
| A20005-9 | CLAMP - CONTROL CABLE TOOL | 21 | |
| A20168 | TOOL - ML300/110 WORK LAMPS | 1 | |
| A21501 | CLAMP, TOOL | 1 | |
| A21527 | CLAMPING TOOL | 1 | |
| A2171G1 | TOOL-LAMP ORING ASSEMBLING | 1 | |
| A30199 | INSTALLATION TOOL FOR BAND CLAMP | 8 | |
| A330-92051-0001 | SURGE DAMPER TOOL | 1 | |
| A40199 | HAND BANDING TOOL - STANDARD CLAMPING BAND | 6 | |
| A49099 | TIE-DEX II BAND-IT CLAMP TOOL KIT | 1 | |
| A71011-275 | TOOL - FRONT FIXING CLAMP | 3 | |
| AB20001-F18 | CRIMPING TOOL AMP 576779HVY HD STRATO 20AWG | 1 | |
| AB20001-FJ6 | CRIMPING TOOL AMP 576780HVY HD STRATO 18AWG | 1 | |
| AB20001-H47 | CRIMPING TOOL AMP 576778HEAVY HD HT, STRATO #24-#22 | 1 | |
| ACOUSTIC | ACOUSTIC CLAMP SET TOOL | 1 | |
| ACS76049 | DISC SPRING DAMPER RIGGING TOOL | 4 | |
| AF0449003 | CRIMPING TOOL AMP T-HEAD 59250 | 1 | |
| AGE-03807-405 | FUEL SAMPL DRAIN TOOL | 1 | |
| AGE04280-401 | TOOL, FUEL SAMPLING(GSE096) | 8 | |
| ALRB | SNOOPY TOOL AMPCO ALRB | 1 | |
| AMI-TW-TOOL | PowerAll Systems PAS-TW-TOOL Pratt & Whitney PT-6 Turbine Wheel Wash Tool | 1 | |
| AMP46673 | AMP CRIMPING TOOL | 3 | |
| AMP59461 | Crimp Tool AMP59461 | 1 | |
| APD306 | LAMP EXTRACTING TOOL FOR MODULE 69-76436-9 | 1 | |
| ASA-AFT-1 | FUEL SAMPLING TOOL | 1 | |
| AST6196 | CV BOOT CLAMP PLIER TOOL | 1 | |
| AT2055 | FLUTTER DAMPER FILLING/BLEEDING TOOL | 1 | |
| ATC-601-2 | RAMP TEST TOOL | 12 | |
| ATI402A-4 | ATI Tools ATI402A-4 HSS 14 OD & 18 Pilot Hole 100 Back Countersink | 1 | |
| ATI402B-4 | ATI Tools ATI402B-4 HSS 14 OD & 332 Pilot Hole 100 Back Countersink | 1 | |
| ATI402C-4 | ATI Tools ATI402C-4 HSS 516 OD & 18 Pilot Hole 100 Back Countersink | 1 | |
| ATI402D-4 | ATI Tools ATI402D-4 HSS 516 OD & 532 Pilot Hole 100 Back Countersink | 1 | |
| ATI402E-4 | ATI Tools ATI402E-4 HSS 38 OD & 316 Pilot Hole 100 Back Countersink | 1 | |
| ATI402F-4 | ATI Tools ATI402F-4 HSS 38 OD & 532 Pilot Hole 100 Back Countersink | 1 | |
| ATI402G-4 | ATI Tools ATI402G-4 HSS 716 OD & 316 Pilot Hole 100 Back Countersink | 1 | |
| ATI402H-4 | ATI Tools ATI402H-4 HSS 716 OD & 532 Pilot Hole 100 Back Countersink | 1 | |
| ATI402I-4 | ATI Tools ATI402I-4 HSS 12 OD & 316 Pilot Hole 100 Back Countersink | 1 | |
| ATI402J-4 | ATI Tools ATI402J-4 HSS 12 OD & 14 Pilot Hole 100 Back Countersink | 1 | |
| ATI402K-4 | ATI Tools ATI402K-4 HSS 916 OD & 316 Pilot Hole 100 Back Countersink | 1 | |
| ATI402L-4 | ATI Tools ATI402L-4 HSS 916 OD & 14 Pilot Hole 100 Back Countersink | 1 | |
| ATI402M-4 | ATI Tools ATI402M-4 HSS 58 OD & 14 Pilot Hole 100 Back Countersink | 1 | |
| ATI402N-4 | ATI Tools ATI402N-4 HSS 58 OD & 516 Pilot Hole 100 Back Countersink | 1 | |
| ATI402Q-4 | ATI Tools ATI402Q-4 HSS 34 OD & 14 Pilot Hole 100 Back Countersink | 1 | |
| ATI402R-4 | ATI Tools ATI402R-4 HSS 34 OD & 516 Pilot Hole 100 Back Countersink | 1 | |
| ATI402T-4 | ATI Tools ATI402T-4 HSS 78 OD & 38 Pilot Hole 100 Back Countersink | 1 | |
| ATI402V-4 | ATI Tools ATI402V-4 HSS 1 OD & 38 Pilot Hole 100 Back Countersink | 1 | |
| ATI800FG | INSERTER AND REMOVER,TURNLOCK FASTENER, AVIATION TOOLS,SKIN CLAMP RUNNER,SKIN CLAMP RUNNER GUN | 2 | |
| B12004-1 | FUEL SAMPLING TOOL | 22 | |
| B14GF1503 | TEST TOOL - REGULATOR & S/O VALVE | 1 | |
| B201010T-501 | C&D BOLT ROTATION TOOL | 6 | |
| B21001-1 | RELIEF VALVE TOOL (CLAMP AND INSTRUCTIONS) | 7 | |
| B21001-2 | RELIEF VALVE CLAMP TOOL | 1 | |
| B27055-1 | T/E FLAP TORQUE TUBE CLAMP SET TOOL | 12 | |
| B29005-17 | YAW DAMPER MODULES TOOL | 7 | |
| B29005-18 | SIM YAW DAMPER MODULE TOOL | 2 | |
| B29005-1 | YAW DAMPER TOOL | 1 | |
| B29005-2 | YAW DAMPER MODULE TOOL | 1 | |
| B29006-18 | YAW DAMPER/STAB TRIM MODULE TOOL | 1 | |
| B57002 | EXTRACTION TOOL -0 CLAMP-UP BUSHING, AFT FLAP | 1 | |
| B57002-1 | EXTRACTION TOOL - CLAMP-UP BUSHING, AFT FLAP SUPPORT | 4 | |
| BOE-1030-909 | DISASSEMBLING TOOL RACK DAMPER | 1 | |
| BT387 | Starrett 160 TOOLMAKERS STEEL CLAMPS | 1 | |
| BT492 | Starrett 161AA TOOLMAKERS CLAMP(SINGLE) | 1 | |
| BT497 | Starrett 161A TOOLMAKERS CLAMP (SINGLE) | 1 | |
| BT502 | Starrett 161B TOOLMAKERS CLAMP (SINGLE) | 1 | |
| BT507 | Starrett 161C TOOLMAKERS CLAMP (SINGLE) | 1 | |
| BT512 | Starrett 161D TOOLMAKERS CLAMP (SINGLE) | 1 | |
| BT517 | Starrett 161E TOOLMAKERS CLAMP (SINGLE) | 1 | |
| C34005-16 | LRRA RAMP TEST TOOL | 10 | |
| C71043-1 | CLAMP SET - HOR & SDOS( FAN COWL OPEN SAFETY TOOL) | 7 | |
| CABLE-CLAMPS | CLAMP TOOL | 1 | |
| CCA-39680 | CURTIS TOOL FUEL SAMPLING CUP | 3 | |
| CHA700-224 | BACK LASH CLAMP TOOL | 6 | |
| CJMD127-004 | RUDDER PEDAL CLAMPING TOOL | 1 | |
| CJMD132-002 | CAMPER ADJUSTING TOOL | 1 | |
| CJMDL27-004 | RUDDER PEDAL TENSION/CLAMPING TOOL KIT | 2 | |
| CLAMPINGT00L | CLAMPING TOOL | 1 | |
| CLEKO-1-INCH | CLAMP TOOL | 1 | |
| CS-295-AG138 | UNLOCKING TOOL, LATCHING MECHANISM RAMP DOOR. | 1 | |
| CS-710-214 | HOSE CLAMP TOOL | 1 | |
| CS-710-235 | SPECIAL TOOLS A330 CS-710-235 CLAMP INSTALLATION TOOL | 1 | |
| CS710-214 | HOSE CLAMP TOOL | 1 | |
| CT-457 | Champion Aerospace CT-457 Fine Wire Gap Setting Tool | 1 | |
| CTL-1 | CRIMP TOOL - AMP (WITH DIE SET) | 2 | |
| D21980 | A300B4 PITCH DAMPER TOOL | 4 | |
| D60-3277-10-00-ST | DAMPER DRAIN TOOL | 1 | |
| D622P0010101 | TOOL LEAD LAG DAMPER | 1 | |
| DAPT60-0223-00 | OUTER SLEEVE CLAMP ( PROPELLER BLADE TOOL) | 7 | |
| DBS-2100 | One-Step Banding Tool for .250 Wide Stamped EMI/RFI Shield Bands (M81306/1A) | 5 | |
| DBS-2102 | One-Step Banding Tool Kit for .250 Wide Stamped EMI/RFI Shield Bands (M81306/1-01) | 2 | |
| DBS-2200 | One-Step Banding Tool for .125 Wide Stamped EMI/RFI Shield Bands (M81306/1B) | 3 | |
| DBS-2202 | One-Step Banding Tool Kit for .125 Wide Stamped EMI/RFI Shield Bands (M81306/1B) | 2 | |
| DBS2200 | 0.125 MINI METAL CLAMP TIGHTENING TOOL (75-85 LBS) | 3 | |
| DCT4-101 | Commercial Crimp Tool - AMP 58573-1 | 4 | |
| DCT4-166 | Crimp Tool - Equivalent to Amphenol CTL-15 | 2 | |
| DCT4-169 | Crimp Tool - Equivalent to Amphenol CTL-8 | 2 | |
| DH82440001-001-96 | CLAMP INSTALATION TOOL | 1 | |
| DMC1383 | HD51 HYDRAULIC TOOL KIT FOR INSULATED & UNINSULAT | 2 | |
| DRT68840 | CLAMP SIDE STAY,TOOL,REMOVAL OF THE MLG TARGET | 10 | |
| DZZ7055-1 | SHOCK STRUT CLAMP TOOL | 3 | |
| E-C622G401101 | RIGGING TOOLS LEAD LAG DAMPER | 1 | |
| EAM0032G02A | WASHER TOOL CLAMPING 6200 | 1 | |
| F28372000 | TOOL TOOL-CLAMPING | 1 | |
| F80-0-2735 | ROLLER STAKE TOOL & BASE | 1 | |
| F80201-1 | FUEL SAMPLING TOOL | 30 | |
| F8201-1 | FUEL SAMPLING DRAIN TOOL | 1 | |
| FD1104-29-45 | YAW DAMPER SERVO TOOL | 1 | |
| FGFB912001A4 | IOB - FUEL TANK SAMPLING TOOL | 1 | |
| FGFB912001A7 | IOB - FUEL TANK SAMPLING TOOL | 1 | |
| FGFB927505 | YAW DAMPER ADJUSTMENT TOOL | 1 | |
| FLUKE 323 | TOOLING CLAMP METER | 4 | |
| FLUKE36 | TOOL - CLAMP MULTIMETER | 2 | |
| FX101-9 | INSERTION/EXTRACTION TOOL - AMPHENOL | 1 | |
| FXT-04547 | Alignment Tool Clamps | 1 | |
| G27024-1 | Clamping tool | 9 | |
| G601R291004-25 | Take oil samples Tools | 5 | |
| GA143A | TOOL, VALVE COR & STEM 1 7/8 | 2 | |
| GK-25-00 | TOOL KIT, M/R DAMPER ATTACHING BOLT REMOVAL | 1 | |
| GMT1006 | Crimping tool ( analogue to AMP 46447 ) | 2 | |
| GMT220 | GMT220 Commercial Crimp Tool - Comp. to AMP 90223, 90260 | 2 | |
| GMT309 | General Purpose Crimp Tool - Amp Tyco Tool 144969-2 | 2 | |
| GS2B-E | PLASTIC CABLE CLAMP INSTALLATION TOOL | 4 | |
| GSE-114 | TOOL-LAMP-CAPSULE-EXTRACTION | 1 | |
| H140AMV218M | DAMPING SPRING CHECKING TOOL | 1 | |
| H1670 | JET Equipment & Tools H1670 Piston Ring Compressor Set - 2-78 to 4-38 | 1 | |
| HA-500-DCTK | Damper Test Tool | 1 | |
| HAYFAIG-12 | 12" G CLAMP TOOL | 1 | |
| HAYFAIG-2 | 2" G-CLAMP TOOL | 1 | |
| HAYFAIG-3 | 3" G CLAMP TOOL | 1 | |
| HAYFAIG-4 | 4" G CLAMP TOOL | 1 | |
| HAYFAIG-6 | 6" G CLAMP TOOL | 1 | |
| HAYFAIG-8 | 8" G CLAMP TOOL | 1 | |
| HC130H0258-000 | Fuel sampling tool - 4lb | 4 | |
| HE52B | HEADLAMP SPRING TOOL | 1 | |
| HEAT-LAMPS | HEAT LAMPS TOOL | 1 | |
| HU17340 | CLAMPING TOOL | 1 | |
| HU44473 | BAND CLAMP TORQUE TOOL | 1 | |
| HU80888 | TOOLING. CLAMP ASSY | 2 | |
| IAE2R19912 | MANIPULATOR ARM CLAMP TOOL | 1 | |
| INS AMPROBE 34XR | AMPROBE 34XR TOOL | 1 | |
| J020 | BAND-IT JR CLAMP TOOL | 2 | |
| J21009-33 | AIR SAMPLING TOOL KIT | 2 | |
| J21009-48 | AIR SAMPLING TOOL KIT | 4 | |
| K27068- 12 | MEASURING TOOL - SUPPORT 3 CLAMP SET | 3 | |
| K27068-1 | Measuring Tool - Support 1 Clamp Set | 4 | |
| K27068-12 | MEASURING TOOL - SIPPORT 6 CLAMP SET | 3 | |
| K27068-2 | Measuring Tool - Support 2 Clamp Set | 5 | |
| K27068-3 | CLAMP SET TOOL MEASU | 5 | |
| K27068-4 | CLAMP SET TOOL MEASU | 5 | |
| K27068-5 | Measuring Tool - Support 7 Clamp Set | 7 | |
| K27068-6 | Measuring Tool - Support 8 Clamp Set | 3 | |
| K4-162-162L | THINWALL INSERT GAGES & KITS TOOLS | 1 | |
| K55006-125 | TORQUE TOOL REACTION FIXTURE EQPT - CLAMP SET | 8 | |
| K55006-74 | TORQUE TOOL REACTION FIXTURE EQPT - CLAMP SET | 5 | |
| K55006-75 | TORQUE TOOL REACTION EQPT - CLAMP SET | 9 | |
| L133M-6201-101 | MAIN ROTOR DAMPER TOOL KIT | 2 | |
| L133M6201101 | MAIN ROTOR DAMPER TOOL KIT | 2 | |
| L133M6204101 | H135 MAIN BLADE REMOVAL DAMPING DAMPER TOOL | 1 | |
| LED LAMP | LED LAMP 110 V TOOL | 1 | |
| LH630 | CLAMP METER TOOL | 1 | |
| LIL44480 | LARGE HOSE CLAMP TOOL | 1 | |
| LINEGL0WLAMP | LINEGLOW TANK LAMP TOOL | 1 | |
| M00401H0010 1A023R | TOOL DAMPER ROD END REPLACEMENT | 1 | |
| M00401H001003A023R | TOOL, DAMPER ROD-END REPLACEMENT | 1 | |
| M00401H001003A023S | TOOL, DAMPER ROD-END POSITIONING | 1 | |
| M21917 | CRAMPING TOOL | 2 | |
| M22520/1-02 | CRIMP TOOL TURRET HEAD (AMP 601967-2) | 18 | |
| M300-25A | Crimp Tool for Amphenol-Sine Starline Pin & Socket Contacts 10-18 AWG | 2 | |
| M317 | Crimp Tool for Harsh Environment Contacts including CKB, Souriau, Burndy, Amphenol Socapex FRB Connectron, etc.) | 2 | |
| M81969-1-01 | AMP EXTRACTION-INSERTION TOOL | 23 | |
| M81969/1-03 | AMP EXTRACTION-INSER- TION TOOL | 18 | |
| M81969/14-11 | TOOL, LAMP, INSTALLATION AND REMOVAL (M81969/14-02) | 30 | |
| M819691-03 | AMP EXTRACTION-INSER- TION TOOL | 18 | |
| MA01887-2190 | TOOL-LAMP O RING ASSEMBLING | 1 | |
| MH16185 | 757 RETAINING CLAMP TOOL | 1 | |
| MIT012A0045-1 | DRILL/REAM/CLAMPING TOOL KIT | 1 | |
| MIT148T2140 | MISCELLANEOUS TOOL CLAMP | 3 | |
| MIT65B00772 | MISCELLANEOUS TOOL - FUEL SAMPLING RECEPTACLE ASSEMBLY | 8 | |
| MIT65B40110 | REMOVAL TOOL -0 INDICATOR LAMP | 1 | |
| MITK55006-74 | TORQUE TOOL REACTION FIXTURE EQUIPMENT - LAMP SET | 1 | |
| MK9 | TOOL FOR INSERTING CLAMPS | 1 | |
| MN39 | CURRENT CLAMP TOOL | 1 | |
| MN89 | CLAMP METER TOOL | 1 | |
| MRO608C3103 | SPL-15028 - ASSEMBLY TOOL - SPRING CLAMP, AUTO RESTOW | 1 | |
| MS-A3C-CLAMP-COMBO | MilSpec MS-A3C #3 Oval Head Z-Spec Grommet Flaring Tool & C-Clamp Combo Package | 1 | |
| MS-A4C-CLAMP-COMBO | MilSpec MS-A4C #4 Oval Head Z-Spec Grommet Flaring Tool & C-Clamp Combo Package | 1 | |
| MS-A5C-CLAMP-COMBO | MilSpec MS-A5C #5 Oval Head Z-Spec Grommet Flaring Tool & C-Clamp Combo Package | 1 | |
| MS-ZC | MilSpec MS-ZC C-Clamp for All Z-Spec Grommet Flaring Tool Sets | 1 | |
| MS24256A12 | INSERTION TOOL AMP MS24256A12 N42 0205 | 7 | |
| MS90387-1 | PLASTIC CABLE CLAMP INSTALLATION TOOL | 2 | |
| MSA10-500A | DOOR DAMPNER BOTTLE ROLL PIN RMVL TOOL | 1 | |
| MST2-190-189-6-1-PP | Bojo Tools MST2-190-189-6-1-PP Dauber Handle & HI-LOK #6 | 1 | |
| MST2-190-189-6-3-PP | Bojo Tools MST2-190-189-6-3-PP Dauber Handle & HI-LOK #6 | 1 | |
| MST2-190-189-6-4-PP | Bojo Tools MST2-190-189-6-4-PP - Dauber Handle & HI-LOK #6 | 1 | |
| MST2-190-189-6-5-PP | Bojo Tools MST2-190-189-6-5-PP - Dauber Handle & HI-LOK #6 | 1 | |
| MST2-190-189-8-1-PP | Bojo Tools MST2-190-189-8-1-PP Dauber Handle & HI-LOK #8 | 1 | |
| MST2-190-189-8-3-PP | Bojo Tools MST2-190-189-8-3-PP Dauber Handle & HI-LOK #8 | 1 | |
| MST2-190-189-8-4-PP | Bojo Tools MST2-190-189-8-4-PP - Dauber Handle & HI-LOK #8 | 1 | |
| MST2-190-189-8-5-PP | Bojo Tools MST2-190-189-8-5-PP - Dauber Handle & HI-LOK #8 | 1 | |
| NAV402APA100 | RAMP TEST EQPT (VOR/ILS) TEST SET TOOL | 5 | |
| OTCMLR6792-1 | DAMPER TOOL | 1 | |
| OUT141 | TOOL TO RETRACT THEVCONNECTOR CLAMPING CATCHES | 2 | |
| OUT83 | LAMP EXTRACTOR TOOL | 6 | |
| PAS-TW60-TOOL | PowerAll Systems PAS-TW-TOOL Pratt & Whitney PT-6 Turbine Wheel Wash Tool | 2 | |
| PF53467-4P | SHIMMY DAMPER CHARGING TOOL | 2 | |
| PRETQN508 | C-CLAMP REPAIR TOOL | 1 | |
| PS-IL10 | FLASHLIGHT;|NH90 TOOL STORE ,UNILITE HANDHELD INSPECTION LAMP 3.7 V ,RS COMPANY ,RS STOCK NO (172-1177); | 1 | |
| PSE/ES/2014/098 REV1 | TOOL M/R DAMPER | 1 | |
| PTT50104 | ADEL CUSHION CLAMP TOOL | 1 | |
| PUL5010 | MOCLAMP #1 TOOL BOARD | 1 | |
| PUL5050 | MOCLAMP #5 TOOL BOARD | 1 | |
| PUL5078 | MOCLAMP #10 TOOL BOARD | 1 | |
| PUL5090 | MOCLAMP #9 TOOL BOARD | 1 | |
| PWA 25690 | TOOL CLAMP | 1 | |
| PWA9710 | TOOL, CARBON SEAL CLAMP | 1 | |
| PWC47021 | Clamping tool | 1 | |
| PWC68665 | Clamping tool | 1 | |
| PWC68779 | CLAMPING TOOL | 3 | |
| PWC69018 | CLAMPING TOOL | 1 | |
| R-D622P0010101 | TOOL LEAD LAG DAMPER | 1 | |
| R51002 | CAMPACTION TOOL | 1 | |
| RB 92700-10352-101 | DAMPER BEARING ALIGNMENT TOOL | 2 | |
| RB 92700-10353-042 | MAIN ROTOR DAMPER ROD END TORQUING TOOL | 2 | |
| RB877406-5 | DAMPER BEARING CUTTER TOOL | 2 | |
| RBD26300-80901 | Landing Gear Damper Overhaul Charging Tool Complete (New) | 2 | |
| RBD29938 | Landing Gear Damper Seal Tool | 2 | |
| RBE332A-93-3193-00 | Damper Support Tool | 1 | |
| RBEL133M-6201-101 | Main Rotor Damper Tool Kit | 2 | |
| RBEM622V4008101 | MAIN ROTOR HEAD DAMPER SETTING TOOL | 2 | |
| RBEM642V5000102 | TAIL ROTOR HEAD DAMPER HOLDING TOOL KIT | 2 | |
| RBT400244 | CLAMP ASSY,TOOL BACK | 2 | |
| RBW005G05951-3G | Main Rotor Damper Rod End R&R Tool | 1 | |
| RBW6205G05951-3G | TOOL, M/R DAMPER ROD END | 2 | |
| RBW6205G21631-3G | TOOL, M/R DAMPER ATTACHING BOLT REMOVAL | 2 | |
| RBW6220G01931-8G | M/R DAMPER ATTACHMENT BOLT REMOVAL TOOL | 2 | |
| RBW6405G00531-3G | Tail Rotor Damper Length Adjustment Tool | 2 | |
| RBW6405G02131-3G | TOOL, T/R BLADE DAMPER ATTACH. BUSHING REM. | 2 | |
| RBW6705G03131-3G | Locking Tool Main Rotor Damper | 2 | |
| RBWM00401H001003A023 R&S | Damper Rod-End Tool Kit | 1 | |
| RRT027639 | LOCKING STRAP CLAMP TOOL | 1 | |
| RRT028471 | CLAMP TOOL | 1 | |
| RRT055978 | CLAMP TOOL | 1 | |
| RRT067142 | RAMP TOOL-ASSY TOOL | 1 | |
| RRT088892 | CLAMP TOOL | 1 | |
| RRT102100 | CLAMP TOOL | 1 | |
| RRT102101 | CLAMP TOOL | 1 | |
| RS3 | AMPROBE TOOL | 1 | |
| RSE1075 | REWORK TOOL, RAMP FAIRING L/H | 1 | |
| RSE1075 L/H REV A | REWORK TOOL, RAMP FAIRING | 1 | |
| RSE1076 | REWORK TOOL, RAMP FAIRING R/H | 1 | |
| RSE1076 R/H REV A | REWORK TOOL, RAMP FAIRING | 1 | |
| RSE1256 | CLAMP CRIMP TOOL | 1 | |
| RSE1256 REV NC | CLAMP CRIMP TOOL | 1 | |
| RSEI075 | REWORK TOOL, RAMP FAIRING | 1 | |
| RSEI076 | REWORK TOOL, RAMP FAIRING | 1 | |
| RT210/2/85003 | RELEASE TOOL FOR SOK SPRING BAND CLAMPS | 1 | |
| RT21002085006 | RELEASE TOOL FOR SOK SPRING BAND CLAMPS | 1 | |
| RUBBER STAMP TOOL | RUBBER 1CM SQUARE STAMP TOOL | 1 | |
| S47232 | TOOL TO MEASURE THE CLEARANCE BETWEEN THE ROTOR CLAMPS | 1 | |
| SB757-27A0125 | CLAMP GEARBOX TRAVEL CHECK TOOL | 1 | |
| SCA-FUEL | FUEL SAMPLE TOOL (HEAD BUCKET ) | 1 | |
| SCA-FUEL3M | TELESCOPIC FUEL SAMPLE TOOL | 1 | |
| SCA2GAL-SDF | SHIMMY DAMPER CHARGING TOOL | 1 | |
| SEY64300 | TOYOTA DAMPER HOLDING TOOL | 1 | |
| SEY64500 | GM HARM DAMP PULLY HOLD TOOL | 1 | |
| SIC3500-001 | STRUT INFLATOR, BRAKE ACCUMULATOR & DOOR DAMPER CHARGING TOOL | 8 | |
| SK2-20413 | PITCH DAMPER TOP UP TOOL | 4 | |
| SPL49713 | NO GO HI LIMIT RAMP TOOL | 1 | |
| ST2575C-1 | SLEEVE & PIN PRESS TOOL BAC5162-64 | 3 | |
| ST2715 | CLAMP, CABLE TURNBUCKLE A/C TOOLING | 1 | |
| T-0074 | SIMMY DAMPNER TOOL | 1 | |
| T-00741 | SHIMMY DAMPER SPECIAL TOOL | 1 | |
| T-30A | VOR / ILS RAMP T/SET TOOL | 1 | |
| T00741 | SHIMMI DAMPER SPECIAL TOOL | 1 | |
| T101937 | BEARING INSTALLATION & REMOVAL TOOL | 1 | |
| T185 | CRIMP TOOL-AMP-SEATS | 5 | |
| T200 | Champion Slick T-200 Magneto Tool Kit | 2 | |
| TANK-LAMP | TANK LAMP TOOL | 1 | |
| TD1647-001 | AMPLIFIER REMOVAL TOOL | 1 | |
| TG-01 | CLAMPING TOOL | 1 | |
| TK 2281/936 | SHIMMY DAMPER ADJUSTMENT TOOL | 1 | |
| TK2281/936 | SHIMMY DAMPER ADJUSTMENT TOOL | 1 | |
| TKLAM | TANK LAMPS TOOL | 1 | |
| TM0797G002 | INSTALL & REMOVAL TOOL | 1 | |
| TM1581G001 | SAMPLING TOOL | 1 | |
| TM4811G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5875G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5896G003 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5897G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5898G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5899G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM5926G001 | CLAMPING TOOL | 1 | |
| TM5974G001 | WRENCH AND CLAMPING TOOL | 1 | |
| TM6025G002 | TOOL OF CLAMP | 1 | |
| TM7217G001 | WRENCH AND CLAMPING TOOL - METALIC | 1 | |
| TN504759 | TOOL, DOOR DAMPER | 1 | |
| TO9638-3 | CLAMPING TOOL | 1 | |
| TOOL129 | McFarlane TOOL129 Black 1, 1-14 & 1-12 Axle Size Aircraft Tire Balancer | 1 | |
| TOOL129-LA-KT | McFarlane TOOL129-LA-KT Large (1-58 & 2) Axle Bushing Kit | 2 | |
| TORRO 9 8-16 | HOSE CLAMP TOOL | 1 | |
| UL38642 | CLAMPING TOOL (LOCKOUT BRACKET) | 1 | |
| V802 | SAMPLER DRAIN TOOL ASSEMBLY, FUEL SUMP | 2 | |
| V814A | TOOL, FUEL SAMPLER | 3 | |
| VICE-CLAMP-11SP | VICE CLAMP TOOL | 1 | |
| VICE-CLAMP-18DR | VICE CLAMP TOOL | 1 | |
| VICE-CLAMP-18SP | VICE CLAMP TOOL | 1 | |
| VICE-CLAMP-4SP | VICE CLAMP TOOL | 1 | |
| VICE-CLAMP-6SP | VICE CLAMP 6 SP TOOL | 1 | |
| VP11SP | VICE-CLAMP-11SP TOOL | 1 | |
| VP18SP | VICE-CLAMP-18SP TOOL | 1 | |
| VP4SP | VICE-CLAMP-4SP TOOL | 1 | |
| VR-DA4-5700-00-30 | ADAPTER DAMPER DRAIN TOOL | 1 | |
| WSCREEN-ALLIGN-CLAMP | WINDSCREEN ALLIGNMENT CLAMP TOOL | 1 | |
| WTGC96-10000 | TOOL - SAMPLING AND WATER MEASUREMENT | 1 | |
| Y29L | AMP DIE TOOL | 1 | |
| Z088H6000110 | CAMPILER (CIDS CAM CAMPILER TOOL) | 1 | |
| 12-04763 | SNOOPY TOOL AMPCO ALRB | 1 | |
| DRT68840 | CLAMP SIDE STAY,TOOL,REMOVAL OF THE MLG | 10 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
