| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| AGE-03901-401 | AIR INLET | 2 | |
| GS12954-1 | AIR INLET | 2 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 0206307750 | VENTILATION AIR INLET | 1 | |
| 0465710120 | AIR INLET INTAKE | 1 | |
| 101-590098-7 | COVER, AIR INLET | 3 | |
| 101-590107-1 | BLEED AIR INLET SCOOP PLUG (BEECHCRAFT CORP) | 3 | |
| 109-590014-7 | AIR INLET COVER (BEECHCRAFT CORP) | 3 | |
| 11-10829 | AIR INLET ADAPTER | 1 | |
| 1159GSE40117-1 | NACELLE AIR INLET COVER | 1 | |
| 1159GSE40122-3 | PYLON AIR INLET BLANK | 1 | |
| 135T06292-401 | ENGINE AIR INLET COVER | 1 | |
| 145-52691-401 | COVER- AIR INLET, APU | 3 | |
| 145-63225-401 | COVER - AIR INLET, APU | 3 | |
| 14W1060001 | COVER - ENGINE AIR INLET | 2 | |
| 15W1001001 | INLET LIFTING ADAPTER (FOR THE EMB 170/175 AIRCRAFT) | 2 | |
| 170T06202-401 | COVER, ECU NACA AIR INLET - FWDWFF | 2 | |
| 172-104 | CARB AIR INLET PLUG, oval shape (Early models, 1960-1966) | 1 | |
| 172-106 | AIR INLET COVER | 1 | |
| 172-108 | CARB AIR INLET PLUG, rectangular shape (Earliest Models ,1959 and before) | 1 | |
| 172-109 | ENGINE INLET PLUGS (Premier Aircraft Diesel Conversion) (set of 3) | 1 | |
| 182-105 | TURBO AIR INLET PLUG (TR182) | 1 | |
| 182-106 | INDUCTION AIR INLET PLUG (182A & B, 1956-59) | 1 | |
| 1900C-115 | RAM AIR INLET PLUG (Co-Pilot Side, on Nose) | 1 | |
| 1900D-125 | RAM AIR INLET PLUG (Co-Pilot Side, on Nose) | 1 | |
| 196T07621-401 | COVER, ECU NACA AIR INLET - FWD WFF | 1 | |
| 196T08170-401 | COVER - AIR INLET, DRY AREA | 1 | |
| 1997 | SIGHT GLASS/AIR BLEED VALVE ASSY 3/8IN BSP(M) INLET (SPARE) | 1 | |
| 2024847-1 | AIR INLET DUCT | 1 | |
| 2024902-1 | Air Inlet Sensing Duct Assembly | 1 | |
| 214ST-104 | ALTERNATE (AFT) AIR INLET PLUGS (set of 2) | 1 | |
| 217384-1 | VSE Aviation 217384-1 Inlet Cover, For Aircraft Engine | 1 | |
| 270-00944 | WIRING DIAGRAM, AIR INLET TEST FIXTURE | 1 | |
| 270-00951 | ASSEMBLY FIXTURE, AIR INLET ASSY | 1 | |
| 284520-2-1 | INLET AIR SENSING DUCT | 1 | |
| 293478-1 | SENSOR-INLET AIR DUCT | 1 | |
| 294393-2 | INLET AIR DUCT | 1 | |
| 3122 | AIR LINE MANIFOLD 1/4" INLET SOLID BRASS FLAT HEX | 3 | |
| 3122-04-56 | AIR INLET VALVE | 1 | |
| 31P172-27-1 | ENGINE AIR INLET DE-ICER | 1 | |
| 31P172-32-1 | ENGINE AIR INLET DE-ICER | 1 | |
| 337-112 | REAR ENGINE INLET COVER (RILEY CONVERSION w/ plug for air inlet on left side) (set of 2) | 1 | |
| 340-101 | ENGINE INLET PLUGS (w/ air scoop below engines) (set of 6) | 1 | |
| 3404049-1 | AIR CONDITIONER INLET HOSE ADAPTER | 1 | |
| 347-1100-1GSE | SLING, LIFT - ENGINE AIR INLET | 2 | |
| 347-1100-4GSE | COVER, ENGINE AIR INLET | 2 | |
| 347-1100-5GSE | PLUG, NACA SCOOP-EN-GINE AIR INLET | 1 | |
| 360036 | Air Inlet Bushing | 1 | |
| 360039 | Air Inlet Bushing Kit (Pistol Grip Models - Back Location) | 1 | |
| 3791183-1 | INLET AIR SENSING DUCT ASSY | 1 | |
| 412-104 | ALTERNATE (AFT) AIR INLET PLUGS (set of 2) | 1 | |
| 421-124 | RAM AIR INTAKE PLUG (small circular inlet on nose) | 1 | |
| 425-115 | HEATER AIR INLET PLUG (on nose) | 1 | |
| 441-110 | OIL COOLER/GEN AIR INLET PLUGS (on nacelle belly) (set of 2) | 1 | |
| 441-140 | AIR CYCLE MACHINE INLET PLUG (ON NOSE) | 1 | |
| 44367-10 | FILTER ASSEMBLY INLET AIR | 5 | |
| 472995 | HYDRAULIC/CONNECTING ROD REPAIR KIT TOOL NO. 472995 USED DURING DISMANTLING AND FITTING INLET AND EXHAUST VALVES | 1 | |
| 2001021 | LC60-RJ1 Lav Cart. Includes all hoses & couplers required to service aircraft. Handles all corporate & regional aircraft. 35 gallon waste, 25-gallon fill, 12V electric pump (4.5gpm @ 40psi) w/on-board battery & charger, low profile 25" inlet height, 7" w | 1 | |
| 2001022 | LC60 Lav Cart. Includes all hoses & couplers required to service aircraft. Handles all corporate jets. 35 gallon waste, 28 gallon fill, heavy-duty hand pump, low profile 19'' inlet height, 7'' waste allows gravity draining without high maintenance waste | 1 | |
| 2002439 | LC100 Galvanized Lav Cart. Includes all hoses & couplers required to service aircraft. Handles all corporate jets. 68-gallon waste, 36-gallon fill, heavy-duty hand pump, low profile 19'' inlet height, fill water drain back and sealed waste hose storage. | 1 | |
| 2002755 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 3" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002756 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 8" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002758 | Oxygen Charge Adapter Combo- 2500 PSI Max- 1/4 Male NPT Inlet connection- Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2003315 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2006570 | Powervamp Portapump, Fuel Pump, Portable, Fueling/Defueling Aircraft *Must select input cable and inlet/outlet hoses | 1 | |
| 23051155 | BELL AIR INLET COMPRESSOR | 1 | |
| 23060647 | Seal – Inlet, Forward Sump Air Flow Check | 1 | |
| 4ZM12 | REGULATOR, AIR COMPRESSOR AIR INLET/OUTLET SIZE: 2", AIR INLET/OUTLET TYPE: NPT (FEMALE), MAX.FLOW RATE: 2000CFM, MAX.OPERATING PRESSURE: 450 PSI, MANUFACTURE: SPEEDAIR | 1 | |
| 550T10473-901 | PROTECTION-AIR INLET,APU | 1 | |
| 58P-101 | ENGINE COWL PLUGS (includes Intake, Cowl Top, Turbo Supercharger Air Inlet & Intercooler inlet plugs) (set of 14) | 1 | |
| 58P-105 | SMALL COWL PLUGS (includes Cowl Top, Turbo Supercharger Air Inlet & Intercooler Inlet plugs) (set of 10) | 1 | |
| 58P-109 | FRESH AIR INLET/EXHAUST PLUGS (set of 2) | 1 | |
| 58TC-101 | ENGINE COWL PLUGS (includes Intake, Cowl Top, Turbo Supercharger Air Inlet & Intercooler inlet plugs) (set of 12) | 1 | |
| 58TC-105 | SMALL COWL PLUGS (includes Cowl Top, Turbo Supercharger Air Inlet & Intercooler Inlet plugs) (set of 8) | 1 | |
| 58TC-109 | FRESH AIR INLET/EXHAUST PLUGS (set of 2) | 1 | |
| 5916737-1 | DORSAL RAM AIR INLET COVER | 1 | |
| 642-1000-501 | AIR INLET COWL | 1 | |
| 642-1000-505 | COWL ASSY-AIR INLET | 1 | |
| 679636 | DUCT Â AIR INLET ENGINE TEST | 1 | |
| 706045 | PROBE, AIR INLET TEMPERATURE | 1 | |
| 6795794 | PROBE TEMPERATURE COMPRESSOR AIR INLET | 2 | |
| 6796365 | Duct – Air Inlet Engine Test | 2 | |
| 6796717 | ADAPTER - COMPRESSOR AIR INLET | 1 | |
| 6796816 | TUBE - CONNECTOR AIR INLET HSG ADAPT | 1 | |
| 6796965 | ADAPTER, ATTACHING COMPRESSOR UNIT (AIR INLET HOUSING) TO MAINTENANCE STAND | 2 | |
| 6797241 | ENGINE TEST AIR INLET | 1 | |
| 6797269 | Adapters – Engine Air Inlet Pad | 1 | |
| 6798038 | Screen, Air Inlet | 2 | |
| 6798143 | Plenum - Air Inlet, Compressor | 1 | |
| 6799647 | Adapter â Checking, Air Inlet Hsg Assembly | 2 | |
| 6799682 | Gage â Checking, Air Inlet Housing Pilot O.D. | 2 | |
| 6799683 | Master â Gage, Checking Air Inlet Housing Pilot O.D. | 2 | |
| 6799787 | ADAPTER, MOUNTING, AIR INLET | 1 | |
| 6799976 | Adapter â Engine Air Inlet Pad (1 Set of 2) NSN 4920003360569 | 2 | |
| 6851349 | Plenum - Air Inlet, Compressor | 2 | |
| 6872544 | Bell-Air Inlet | 2 | |
| 6886211 | BELL - AIR INLET | 1 | |
| 6893378 | BELL - AIR INLET | 1 | |
| 6897006 | PRESSURE TEST FIXTURE, INLET COVER HOLDS INLET COVER IN POSITION DURING WELD REPAIR PRESSURE TEST. | 1 | |
| 6897500 | BELL - AIR INLET | 1 | |
| 6897501 | BELL - AIR INLET | 1 | |
| 7001276 | WIRING DIAGRAM, AIR INLET, TEST FIXTURE APS5000 | 1 | |
| 70700-20114-109 | ENGINE INLET BLEED AIR PLUG | 1 | |
| 717KR | PLUG ASSY-NACA INLET BELLY FAIRING | 1 | |
| 7TE65-46509-1 | Test Equipment - Boost Pump Conduit Air Inlet | 1 | |
| 834526-1 | DUCT TEST ADAPTER (COOLING AIR INLET) | 1 | |
| 834527-1 | DUCT TEST ADAPTER (BLEED AIR INLET) | 1 | |
| 835131-1 | INLET AIR SENSING DUCT ASSEMBLY | 1 | |
| 835403-1 | Inlet air duct | 1 | |
| 8816701000 | BLANK AIR INLET | 1 | |
| 953998C1 | AIR INLET COVER | 1 | |
| 975A0000-02 | ACTUATOR - RAM AIR INLET | 1 | |
| 98A21003000000 | EXTRACTOR-BLEED AIR PRECOOLER COLD AIR INLET DUCT | 1 | |
| 98D10003002000 | AIR INLET COVERS | 17 | |
| 98D21008001000 | ROD ROD AIR INLET | 3 | |
| 98N1010H001000 | AIR INLET COVERS | 5 | |
| 98S10005002000 | RAM AIR INLET PLUGS | 1 | |
| 98S10005004000 | RAM AIR INLET PLUGS | 1 | |
| 99-590014-7 | AIR INLET COVER (BEECHCRAFT CORP) | 1 | |
| A330-92440-0001 | AIR INLET, TEST ADAPTER | 1 | |
| AA5-105 | CARB. AIR or OIL COOLER INLET PLUG (each, specify model and year) | 1 | |
| AB72001-N9H | HAMMER, SLIDING-INLET CONE FAIRINGTBU: AB72001-N9I | 1 | |
| ACS87001 | Soft Cover − Air Inlet and Exhaust (short term) | 3 | |
| ACS87017 | (Blank) Plug − Air Inlet and Exhaust (long term) | 2 | |
| AGE-01423-401 | COVER, HEAT EXCHANGER AIR INLET, APU (GSE 212) | 3 | |
| AGE-03286-401 | COVER - ENGINE AIR INLET | 1 | |
| AGE-03286-403 | COVER - ENGINE AIR INLET | 2 | |
| AGE-03328-401 | ENG AIR INLET SLING | 2 | |
| AGE-03768-401 | COVER - ENGINE AIR INLET | 2 | |
| AGE-03768-403 | COVER - ENGINE AIR INLET | 1 | |
| AGE-03901-401 | COVER, MAIN AIR INLET, APU (GSE 212) | 2 | |
| AGE-04424-401 | COVER - AIR INLET, APU | 2 | |
| AGE-05110-901 | PLUG-AIR INLET,ENGINE | 1 | |
| AGE-05300-901 | PLUG-AIR INLET | 1 | |
| AGE01423-401 | COVER - HEAT EXCHANGER AIR INLET, APU | 3 | |
| AH72-130 | FRESH AIR INLET PLUGS, on belly of nose (set of 2) | 1 | |
| AID-01160 | AIR INLET ASSEMBLY SUPPORT AID | 1 | |
| AID-01434 | AIR INLET INSPECTION AID | 1 | |
| AST400-2 | APU ENGINE AIR INLET COVER | 1 | |
| AST400-3 | APU COOLING AIR INLET COVER | 1 | |
| AZT-102 | ENGINE INLET PLUGS (includes lower cowling induction air inlets) (set of 6) | 1 | |
| AZT-106 | Lower cowling induction air inlet PLUGS (set of 2) | 1 | |
| B18-118 | COCKPIT AIR INLET PLUGS (in leading edge, adjacent to oil cooler) (set of 2) | 1 | |
| B35-108 | FRESH AIR INLET/EXHAUST PLUGS (NOT FOR V35 MODELS) (set of 2) | 1 | |
| B35-110 | INDUCTION AIR FILTER INLET COVER | 1 | |
| B36-108 | FRESH AIR INLET/EXHAUST PLUGS (set of 2) | 1 | |
| B36-110 | INDUCTION AIR FILTER INLET COVER | 1 | |
| B55-115 | CABIN AIR INLET & EXH PLUGS (set of 2) | 1 | |
| B58-108 | FRESH AIR INLET PLUG (on dorsal) | 1 | |
| B58-115 | FRESH AIR INLET/EXHAUST PLUGS (set of 2) | 1 | |
| B60-104 | AIR INLET PLUGS (ON ENGINE SIDE) (set of 2) | 1 | |
| B60-105 | AIR INLET PLUG (ON NOSE) | 1 | |
| B71040-39 | SLING INLET COWL, AIRCRAFT | 20 | |
| B717-806 | WASH PREP: Aft Air Inlet PLUG, on tail, center, Dorsal Ram Air Plug | 1 | |
| B717-816 | APU Shroud Cooling Air Inlet Plug, small circular inlet above PAC A/C Exhaust opening on aircraft right | 1 | |
| B737-275 | RAM AIR INLET RAM PLUG | 1 | |
| B80-110 | CARB. AIR INLET PLUGS (set of 2) | 1 | |
| B90-121 | HEATER AIR INLET PLUG (ON NOSE, PORT SIDE, AFT OF PITOT) | 1 | |
| BVK-101 | CARB AIR INLET PLUG | 1 | |
| C-12003-1 | RAM AIR INLET MODULATION SHAFT LUBRICATION ADAPTOR | 5 | |
| C12003-1 | Adapter Nozzle - Ram Air Inlet Modulation Shaft | 5 | |
| C130-100 | ATM COOLING INLET PLUG (forward and above left main gear), NSN 1730-01-530-6756, "SHIELD,AIRCRAFT GROUND SERVICING" | 1 | |
| C130-121 | FLIGHT DECK A/C INLET/EXHAUST PLUG SETS: H, J, T, P & U-models (on right side, below cockpit area), NSN 1730-01-530-6757, "SHIELD,AIRCRAFT GROUND SERVICING" (set of 2) | 1 | |
| C130-141 | CARGO COMPARTMENT A/C INLET/EXHAUST PLUGS: H, J, T, P & U models, NSN 1730-01-530-6758 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 2) | 1 | |
| C130-152 | MAIN ENGINE INLET PLUGS, heavy duty type, NSN 1730-01-530-6759 "SHIELD, AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| C130-163 | OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-530-6760 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| C71016-1 | Repair Equipment - Inlet Assembly | 1 | |
| C90A-125 | HEATER AIR INLET PLUG (ON NOSE, PORT SIDE, AFT OF PITOT) | 1 | |
| C90B-125 | HEATER AIR INLET PLUG (ON NOSE, PORT SIDE, AFT OF PITOT) | 1 | |
| CF34-10-2V | COVER - ENGINE AIR INLET | 1 | |
| D55-115 | FRESH AIR INLET PLUG (ON DORSAL) | 1 | |
| D60IT AIR DRYER | D60IT 60 HZ / 115-1-60..35 SCFM A/C High Inlet Refrig Air Dryer | 1 | |
| DA42-102 | CABIN AIR HEAT EXCHANGER INLET PLUG (right wing) | 1 | |
| DAS-100 | ENGINE INLET PLUGS (w/ ram air intake plugs) (set of 4) | 1 | |
| DH6-101 | RAM AIR INLET PLUG | 1 | |
| DOTCO 14CNL91-51 | DOTCO 14CNL SERIES NON-REVERSIBLE PISTOL GRIP PNEUMATIC DRILL (CHUCK INCLUDED). TERMINATION: 3/8” CHUCK FREE SPEED (RPM): 5,200 WEIGHT: 2.4LBS/1.09KG OVERALL LENGTH: 7.2”/183MM AIR INLET SIZE: 1/4” | 1 | |
| E145-130 | FRESH AIR INLET PLUGS, on belly of nose (set of 2) | 1 | |
| EMB-00134-001 | COVER, PROTECTION AIR INLET | 2 | |
| EMB-00136-001 | Turbine Air Inlet Cover | 1 | |
| EMB/L-2V | ENGINE AIR INLET COVERS | 1 | |
| EMB00134-001 | COVER AIR INLET | 2 | |
| F15-110 | ENGINE INLET PLUGS, NSN: 1730-01-573-3631 SHIELD, AIRCRAFT GROUND SERVICING (set of 2) | 1 | |
| F15-111 | ENGINE INLET PLUG (EACH), NSN: 1730-01-573-3631 SHIELD, AIRCRAFT GROUND SERVICING | 1 | |
| F18-180 | BLEED AIR INLET PLUGS SET (set of 2) | 1 | |
| F70023 | PLUG ASSY -0 CABIN AIR COMPRESSOR INLET USED TO | 1 | |
| F70081 | PLUG ASSY -0 AIR COND. RAM AIR INLET PREVENTS | 1 | |
| F70146 | PLUG ASSY -0 AIR COND. RAM AIR INLET PREVENTS | 1 | |
| F70146-11 | Plug assembly-air cond intercooler ram air inlets | 4 | |
| F70146-12 | Plug assembly-air cond intercooler ram air inlets | 4 | |
| F71181 | PLUG ASSY -0 AIR COND. RAM AIR INLET USED TO | 1 | |
| F71452 | PLUG ASSY -0 AIR INLET USED TO PREVENT FOREIGN | 1 | |
| F72740 | PLUG -0 AIR CONDITIONING RAM AIR INLET USED TO | 1 | |
| F80164-1 | APU AIR INLET SCREEN | 1 | |
| F80164-28 | APU Air Inlet Screen | 3 | |
| F80164-30 | APU AIR INLET SCREEN | 1 | |
| F80164-35 | APU AIR INLET SCREEN | 1 | |
| F80164-35-M | APU AIR INLET SCREEN | 1 | |
| FMF01-35-51000 | ENGINE AIR INLET COVER | 1 | |
| G49010-1 | DISPATCH KIT - ACTUATOR REPLACEMENT LINK, APU AIR INLET DOOR | 2 | |
| G69010001-1 | BLANKS/PLUGS - AIR INLET AND EXHAUST | 1 | |
| G700-101229-1 | Plug - Ram Air Bypass Inlets | 2 | |
| G700-101229-12 | PLUG - RAM AIR BYPASS INLETS | 1 | |
| GS12954-1 | FIXTURE, AIR INLET SERVO CHAMBER | 2 | |
| GS22250-1 | PNEUMATIK STARTER CMM 80-13-41; HOUSING, INLET - REPAIR 3-1 | 1 | |
| GS22251-1 | PNEUMATIK STARTER CMM 80-13-41; HOUSING, INLET - REPAIR 3-1 | 1 | |
| GSE1000533 | NACELLE AIR INLET COVER | 1 | |
| GSE4920102 | APU ENGINE AIR INLET COVER | 1 | |
| GSE4920103 | APU COOLING AIR INLET COVER | 1 | |
| H102021-5 | PRIMARY AIR INLET SEALING FIXTURE | 1 | |
| H102021-7 | SECONDARY AIR INLET SEALING FIXTURE | 1 | |
| H102076 | RAM AIR INLET SEALING FIXTURE | 1 | |
| H102103 | RAM AIR INLET SEALING FIXTURE | 1 | |
| HSA915166 | COVER,AIR INLET | 1 | |
| HU16-100 | AIR INLET SCOOP PLUGS (set of 2) | 1 | |
| HU55142-1 | MAT - AIR INLET WORK | 10 | |
| IAE1J12020 | LEVER - FAIRING AND INLET CONE REMOVAL PULLER | 17 | |
| IAE1J12121 | MANUAL ENGINE AIR INLET CONE EXTRACTOR | 9 | |
| IAE1J12125 | HAMMER, SLIDING-INLET CONE FAIRING | 12 | |
| IAE1J12125 REVB | HAMMER,SLIDING - INLET CONE FAIRING | 1 | |
| IAE1N20403 | AIRBUS INLET COWL SLING V2500 | 24 | |
| IAE1R18928 | WRENCH, DUCT - AIR COOLED OIL COOLER INLET DUCT | 3 | |
| IFX-5500 | AIR PUMP INLET FILTER EXTENSION HOSE AND TRIPOD ASSEMBLY | 1 | |
| J21008 | DISPATCH EQPT-COVER PLATE,RAM AIR INLET | 1 | |
| J21008-1 | DISPATCH EQUIPMENT - COVER PLATE RAM AIR INLET | 1 | |
| J21008-7 | DISPATCH EQUIPMENT - COVER PLATE, RAM AIR INLET | 9 | |
| J21011-1 | DISPATCH COVER PLATE - RAM AIR INLET DOOR | 3 | |
| J21011-2 | DISPATCH COVER PLATE - RAM AIR INLET DOOR | 2 | |
| J24019-1 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 6 | |
| J24019-2 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 1 | |
| J24019-3 | HOIST ADAPTER - BACKUP GENERATOR RAM AIR INLET | 1 | |
| J2E-08G | HIGH INLET TEMP (AIR COOLLED) | 1 | |
| JB-AE3007A1-2V | ENGINE AIR INLET COVER(DUEL-VENTED) | 1 | |
| JB-CF34-10-2V | ENGINE AIR INLET COVER | 1 | |
| JMP/CFM56/D/6612 | AIR INLET KIT (TO BE USED WITH JMP/LUFT/D/4972/C500) | 1 | |
| JSI-LEG500-03 | PROTECTION-AIR INLET,APU | 1 | |
| K10014-1 | PLUG - CABIN AIR COMPRESSOR, RAM AIR AND ALTERNATE VENTILATION SYSTEM INLET | 4 | |
| K10014-2 | PLUG - CABIN AIR COMPRESSOR, RAM AIR AND ALTERNATE VENTILATION SYSTEM INLET | 3 | |
| K10014-3 | PLUG - CABIN AIR COMPRESSOR, RAM AIR AND ALTERNATE VENTILATION SYSTEM INLET | 2 | |
| K21021-1 | DRILL JIG - HEATER LIP, CABIN AIR COMPRESSOR (CAC) INLET | 3 | |
| K21025-1 | Protective Screen - RAM Air Inlet, Ground Ops | 1 | |
| K21026-1 | PROTECTIVE SCREEN - RAM AIR INLET, GROUND OPERATIONS | 2 | |
| K21026-104 | PROTECTIVE SCREEN-RAM AIR INLET GROUND OPERATIONS | 1 | |
| K21026-94 | PROTECTIVE SCREEN - RAM AIR INLET, GROUND OPERATIONS | 7 | |
| K21026–104 | PROTECTIVE SCREEN – RAM AIR INLET (GROUND OPERATIONS) | 1 | |
| K21030-1 | PCA ADAPTER - RAM AIR INLET | 2 | |
| L20-110 | AIR INLET PLUG (on dorsal) | 1 | |
| L45-109 | ENGINE COVERS (w/dorsal inlet, fuel vent & air vent plugs) (set of 7) | 1 | |
| L45-115 | INSULATED ENGINE COVERS, fully enclose the engine nacelle (w/dorsal inlet, fuel vent & air vent plugs) (set of 5) | 1 | |
| LP3-100 | MAIN ENGINE INLET PLUGS, NSN 1730-01-554-0658 "COVER,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| LP3-110 | OIL COOLER INLET PLUGS, NSN 1730-01-554-0659 "COVER,AIRCRAFT GROUND SERVICING", NATO STOCK NUMBER: 1730-20-A0Y-8488 (set of 4) | 1 | |
| LP3-111 | OIL COOLER INLET PLUGS, heavy duty type, NSN 1730-01-525-0002 "SHIELD,AIRCRAFT GROUND SERVICING" (set of 4) | 1 | |
| LTCT25561-01 | Screen Assembly, Air Inlet | 1 | |
| LTCT25563-01 | Probe Assembly, Air Inlet | 1 | |
| M135-220 | APU INLET COVER, ram air spade | 1 | |
| M20-101 | ENGINE INLET PLUGS, Lasar mod (Cowl Enclosure Fairing) (set of 2) | 1 | |
| M201-106 | FRESH AIR VENT PLUGS (252 models: dorsal & two side cowling inlets) (set of 3) | 1 | |
| MD80-816 | APU Shroud Cooling Air Inlet Plug, small circular inlet above PAC A/C Exhaust opening on aircraft right | 1 | |
| MD900-125 | FULL ENGINE AREA/DOGHOUSE COVER, covers air inlets and exhaust turbines, closes at the base of the main rotor hub | 1 | |
| MIT60B00010 | CAPS, COWL OPENINGS - GENERATOR COOLING AIR INLET AND OUTLET | 1 | |
| MIT65B98813 | LINK - ACTUATOR REPLACEMENT, APU AIR INLET DOOR | 2 | |
| MQ4-100 | INTAKE COVER w/2 RBF Streamers, includes RAM air inlet plug (set of 2) | 1 | |
| MQ4-110 | INTAKE PLUG w/ lip, w/2 RBF Streamers, includes RAM air inlet plug BAMS Model (set of 2) | 1 | |
| MQ8B-120 | INTERNAL ENGINE INLET (PLENUM) PLUG, NSN 4920-01-581-0263 "PLUG ENG AIR INLET" | 1 | |
| MS17984C617 | APU AIR INLET ACTUATOR QUICK RELEASE SELF-RETAINING PIN (ALTERNATE: NAS1336A3C17D) | 1 | |
| OUT50437-1-2 | AIR INLET PORT FIXTURE | 1 | |
| P31T-101 | ENGINE INLET PLUGS (American Aviation Ram Air Recovery Kit, curved bottom) (set of 2) | 1 | |
| P601-105 | HEATER AIR INLET PLUGS (ON TAIL) (set of 2) | 1 | |
| P601-120 | ENGINE AIR INLET & OIL COOLER PLUGS (SUPERSTAR MODEL) (set of 6) | 1 | |
| PA24-110 | CARB AIR INLET PLUG (oval shape) | 1 | |
| PA24-115 | CARB AIR INLET PLUG (rectangle shape) | 1 | |
| PA28-105 | CARB. AIR or OIL COOLER INLET PLUG (each, specify model and year) | 1 | |
| PC12-100 | LARGE ENGINE INLET PLUG (main turbine air intake) | 1 | |
| PC21-110 | SMALL PLUGS SET (Oil Cooler, Gen Air, ACS RAM inlets) (set of 3) | 1 | |
| PLZ-00123 | AIR INLET INSPECTION ASSEMBLY FIXTURE | 1 | |
| POL-3000-01 | PROTECTION-AIR INLET APU | 1 | |
| PROO01-1001428-3 | Tapa Air Inlet | 1 | |
| PROTECTIVE SCREEN - RAM AIR INLET | PROTECTIVE SCREEN - RAM AIR INLET | 1 | |
| PWC32042 | STAND, AIR INLET CASE | 1 | |
| PWC90170 | INLET ASSY-AIR,FALCON 7X | 1 | |
| QR10934 | EAPS KIT REPAIR INLET/OUTLET | 1 | |
| RSE 6401 | COVER - ENGINE AIR INLET | 2 | |
| RSE 6403 | AIR INLET LIFT SLING | 8 | |
| RSE1112 | AIRBUS INLET COWL SLING CFM | 25 | |
| RSE1116 | DOLLY, AIR INLET COW | 14 | |
| RSE3409 | PLUG AIR INLET SCOOP | 3 | |
| RSE3409 REV NC | PLUG AIR INLET SCOOP | 1 | |
| RSE6401 | COVER - ENGINE AIR INLET | 2 | |
| RSE6403 | AIR INLET LIFT SLING | 8 | |
| SAL-03768-401 | COVER - ENGINE AIR INLET | 1 | |
| SE24-1101 | COWL OPENING CAPS - AIR INLET AND OUTLET GENERATOR COOLING | 1 | |
| SP66244 | AIR INLET BUSHING | 1 | |
| ST90652 | PROBE, AIR INLET | 1 | |
| T259094 | ADAPTOR, AIR INLET | 1 | |
| T28-105 | CARB. AIR INLET PLUG | 1 | |
| T34-110 | AIR FILTER INLET COVER | 1 | |
| T566743 | DUCT ASSEMBLY, AIR INLET | 1 | |
| T8909-66 | 501KB7, air inlet pressure probe | 1 | |
| TC1019-4-11 | 501KB7, air inlet pressure probe | 1 | |
| TE21T-31001-25 | AIR INLET PLATE | 1 | |
| TF50B10010-1 | OBTUR. SU AIR INLET | 1 | |
| TMH SD53-00-00 | Air Inlet Dolly - CFM56 | 1 | |
| TSF 28T-11001-19 | SURGE TANK AIR INLET DOOR | 1 | |
| TSF21T-51001-5 | TEST SUPPORT FIXTURE, AIR COND PACKS, AIR INLET | 1 | |
| TSF36T-11001-6 | PLUG, APU BLEED AIR INLET | 1 | |
| TSF734-10201-1 | AIR INLET TEST TOOL ASSY | 1 | |
| U21-125 | HEATER AIR INLET PLUG (ON NOSE, PORT SIDE, AFT OF PITOT) | 1 | |
| UH60-100 | ENGINE AIR INLET PLUGS, no safety lip (set of 2) | 1 | |
| UH60-101 | ENGINE AIR INLET PLUGS, with safety lip (set of 2) | 1 | |
| UH60-102 | ENGINE AIR INLET PLUGS, with small inlet plugs (set of 6) | 1 | |
| UH60-103 | ENGINE AIR INLET PLUGS (HIRSS Type), with safety lip (set of 2) | 1 | |
| UH72-130 | FRESH AIR INLET PLUGS, on belly of nose (set of 2) | 1 | |
| f72783 | ENGINE AIR INLET | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
