| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A38012-10 | AIR ASSEMBLY | 4 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| $32 | Hamilton Standard Gun Assembly (Hair Pin Filament) | 3 | |
| (CALIB) 15F2646 | AIR/HYD PUMP ASSEMBLY (CALIBRATION) | 1 | |
| 01-531091-1 | CHAIR ASSEMBLY (RECLINING) | 1 | |
| 0356950130 | AIR BLEED VALVE ASSEMBLY | 1 | |
| 08-4014-4010 | Engine Compressor Washer - 2 Gallon (Beech) - Aircraft connector assembly, no wand | 5 | |
| 08-4040-4010 | Tronair 08-4040-4010 2.5 Gallon Portable Turbine Engine Compressor Washer with 22 (56 cm) Wand Assembly & Adjustable Spray Nozzle | 7 | |
| 100-604058-001 | CRADLE AIRCRAFT MOUNTING ASSEMBLY RH | 1 | |
| 101-531091-2 | CHAIR ASSEMBLY (RECLINING) | 1 | |
| 101-531091-4 | CHAIR ASSEMBLY (RECLINING) | 1 | |
| 1060153 | MURPHY GAUGE ASSEMBLYMODEL: PV-101-CS,VERSION 3.2 . (AIR START MODEL: ASU-600-150-CUP) | 1 | |
| 109-39DI-26-127 | MAINTENANCE KIT, AIRCRAFT (T/R HUB & BLADE ASSEMBLY INSTALLATION) | 1 | |
| 10C1041G02 | Puller,outer air ducts-lpt nozzle assembly | 1 | |
| 10C1183G01 | Puller, Inner Air Ducts-Lpt Nozzle Assembly | 1 | |
| 11-10865 | INLINE ASSEMBLY, AIR | 6 | |
| 115-00215 | Barfield 115-00215 Cable Assembly, For Aircraft | 4 | |
| 1159GSE50349-1 | CABLE ASSEMBLY- AIRSTAIR SUPPORT MAIN ENTRY DOOR | 1 | |
| 1159GSE50349-303 | CABLE ASSEMBLY - AIRSTAIR SUPPORT MAIN ENTRY DOOR | 1 | |
| 1159GSEP50114‐35 | COVER ASSEMBLY ‐ AIR CYCLE EXHAUST | 1 | |
| 1159SEMP20298 | LEFT RAM AIR SCOOP PLUG ASSEMBLY (1159SEMP20298)-GSE1000545 | 1 | |
| 12-3001 | Air Hose Assembly, 9 Foot | 2 | |
| 12-4040 | Air Hose Assembly - 10 Foot (MS25441-3) | 2 | |
| 137375-F117 | TEST SET SUBASSEMBLY,AIRCRAFT COMPONENTS | 1 | |
| 14-6884-6000 | TRONAIR NITROGEN SERVICE GAUGE ASSEMBLY, HIGH-PRESSURE NITROGEN 3000 PSI | 5 | |
| 15F2646 | AIR/HYD PUMP ASSEMBLY | 1 | |
| 16A13228 | AIR PRESSURE GAGE ASSEMBLY (0-400 PSI) | 1 | |
| 170T06645-401 | ASSEMBLY JIG, RAM AIR | 1 | |
| 17G440559-1 | TEST SET SUBASSEMBLY,AIRCRAFT COMPONENTS | 1 | |
| 195-49075-2 | SENSOR: AIR FLOW,ASSEMBLY, | 3 | |
| 20036D100-3 | GAGE ASSEMBLY, AIR PRESSURE | 1 | |
| 2024902-1 | Air Inlet Sensing Duct Assembly | 1 | |
| 21C7718G01 | ADAPTER, STAGE 1 NOZZLE ASSEMBLY AIRFLOW | 1 | |
| 227497 | PPG Semco 227497 Model 388 Air Cylinder Assembly | 1 | |
| 253566 | JET ASSEMBLY AIR DRIVE | 1 | |
| 264383 | JET ASSEMBLY AIR DRIVE | 1 | |
| 2558696 | BRAKE DISC ALIGNING TOOL USED TO ALIGN THE CARBON ROTORS AND THE STATORS FOR INSTALLATION OF THE WHEEL AND TIRE ASSEMBLY ON THE AIRCRAFT. | 1 | |
| 3028573 | TUBE ASSEMBLY AIR PRESS REAR | 1 | |
| 23006788 | Stand – Air Flow Measurement, Turbine Vane Assembly | 1 | |
| 2606672-4 | B737 AIRCRAFT BRAKE ASSEMBLY | 1 | |
| 27-95031-001 | Fairchild METRO 23, Model SA227-CC, METRO 23, Model SA227-DC,Reference standard for inspection of the MLG and NLG Yoke Assembly. Material: 2024-T351 Aluminum. Includes Test Report and Certificate of Conformance. | 2 | |
| 270-00951 | ASSEMBLY FIXTURE, AIR INLET ASSY | 1 | |
| 284383-1 | JET ASSEMBLY AIR DRIVE | 1 | |
| 294393-2 | inlet air sensing duct assembly | 1 | |
| 2C14785G01 | PULLER, AFT AIR SEAL SUBASSEMBLY, HPT ROTOR | 2 | |
| 2MIT65B40500-1 | ADAPTER ASSEMBLY - LAMB AIR MOVER, HORIZONTAL STABILIZER | 1 | |
| 2OHME65B40551-3 | SLING ASSEMBLY - FAIRING, SATELLITE COMMUNICATION (SATCOM) ANTENNA | 1 | |
| 2PRE65B00726 | COVER ASSEMBLY - AIR EXHAUST DUCT GENERATOR | 1 | |
| 3075323-3 | VALVE: VALVE ASSEMBLY: AIR BREATHER. | 6 | |
| 3402250-1 | ENGINE AIR INTAKE SHIELD ASSEMBLY | 1 | |
| 3402250-3 | ENGINE AIR INTAKE SHIELD ASSEMBLY | 1 | |
| 3404014-1 | BLEED AIR COMPENSATOR CLAMP ASSEMBLY | 1 | |
| 35-93171-0001 | MAINTENANCE STAIR ASSEMBLY | 1 | |
| 355A95-7500-00 | AIR HYDRAULIC TOOL KIT / HYDRAULIC ACCESSORY ASSEMBLY AS350 / AS355 STANDARD | 1 | |
| 375 | Alpha Aviation Model#375 Standard Aircraft Tail Post & Weight Assembly | 3 | |
| 3936851-1 | LOCK ASSEMBLY - MLG DOOR SAFETY (USED WHEN AIRPLANE IS RESTING ON THE GEAR) | 13 | |
| 3MIT65B40500-1 | ADAPTER ASSEMBLY - LAMB AIR MOVER, FUEL TANK | 6 | |
| 3S81071-101 | FIXTURE ASSEMBLY HOLDING CORE HONEYCOMB REPAIR | 1 | |
| 40533 | STEP STANDARD-STAIR ASSEMBLY | 1 | |
| 40540 | TUBE,BRACE-STAIR ASSEMBLY | 1 | |
| 41P6 | FILTER/REGULATOR ASSEMBLY - BREATHING AIR LINE (BULLARD, E.D. COMPANY) | 1 | |
| 44367-10 | FILTER ASSEMBLY INLET AIR | 5 | |
| 500-825 | AIR OPERATION TEST PUMP ASSEMBLY | 1 | |
| 508668-201 | V23/V25 SEATBELT AIRBAG SYSTEM DIAGNOSTICS TOOL ASSEMBLY | 4 | |
| 50MIT65B00112 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 585 | 9 | |
| 5916742-1 | Stairwell Assembly | 1 | |
| 5916789-1 | TEST ASSEMBLY AIR SPEED | 3 | |
| 5936851-1 | LOCK ASSEMBLY - MLG DOOR SAFETY (USED WHEN AIRPLANE IS RESTING ON THE GEAR) | 1 | |
| 6798787 | FIXTURE-COMPRESSOR DISCHARGE AIR TUBE ASSEMBLY PRESSURE CHECK | 1 | |
| 6799647 | Adapter â Checking, Air Inlet Hsg Assembly | 2 | |
| 6872358 | AIR FLOW RIG WHEEL AND NOZZLE ASSEMBLY | 1 | |
| 6877022 | IN-PROCESS INSPECTION FIXTURE USED TO MEASURE CRITICAL DIMENSIONS DURING DISASSEMBLY AND REPAIR OPERATIONS. | 1 | |
| 6877108 | ASSEMBLY FIXTURE ASSISTS REMOVAL OF CARTRIDGE VALVE FROM FUEL NOZZLE CARTRIDGE VALVE CAVITY USING AIR PRESSURE THROUGHTIP END. | 1 | |
| 6897884 | HEATER - AIR, COMPRESSOR ROTOR WHEEL ASSEMBLY | 1 | |
| 60060562 | HOSE-ASSEMBLY AIR SNAP | 1 | |
| 62201-8661 | Daughter Card Signal Module Assembly Press-In Tool for 6-Pair by 10-Column Assemblies | 1 | |
| 62201-8662 | Backplane Signal Module Assembly Press-In Tool for 6-Pair by 10-Column Assemblies | 1 | |
| 62201-8663 | Daughter Card Signal Module Assembly Press-In Tool for 6-Pair by 16-Column Assemblies | 1 | |
| 62201-8669 | Press-In Tool for Power Module Assembly, 6-Pair Assemblies | 1 | |
| 65J34440 | AIR EJECTOR HOLDER ASSEMBLY | 1 | |
| 67A96D1-1 | AIRCRAFT JACK TESTER ASSEMBLY | 3 | |
| 6SF6527-501 | Aircraft BLG Door Lock Assembly | 1 | |
| 72-C04010 | AIR HOSE ASSEMBLY. | 1 | |
| 7947479-10 | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 3 | |
| 7947479-10 I | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 S | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10 Ti | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/17-4PH | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 7947479-10/304SS | Air Force General Purpose Eddy Current Standard. Standard is a three (3) plate assembly measuring 4" x 7" x 1.06". Contains twenty (20) fastener holes with diameters from 0.156 to 0.750", two (2) screw holes, and two (2) dowel pins holes. Standard also co | 1 | |
| 835131-1 | INLET AIR SENSING DUCT ASSEMBLY | 1 | |
| 835540-1 | AIR-SEAL PULLER (REMOVES COUPLING AND SEAL ASSEMBLY FROM THE SHAFT) | 1 | |
| 846-820-030 | AIRCELLE S.A. ASSEMBLY KIT | 1 | |
| 846-824-010 | ANGLE WRENCH REAR ATTACHMENT ASSEMBLY AIRCELLE S.A. | 1 | |
| 846-824-020 | RETAINER FOR REAR ATTACHMENT ASSEMBLY AIRCELLE S.A. | 1 | |
| 856A1380G01 | PULLER, OUTER AIR DUCTS - LPT NOZZLE ASSEMBLY | 7 | |
| 856A1381 | PULLER, OUTER AIR DUCTS - LPT NOZZLE ASSEMBLY | 1 | |
| 856A1381G01 | PULLER, OUTER AIR DUCTS - LPT NOZZLE ASSEMBLY | 8 | |
| 856A1381G02 | PULLER, OUTER AIR DUCTS - LPT NOZZLE ASSEMBLY | 3 | |
| 856A1416 | PULLER OUTER AIR DUCTS LPT NOZZLE ASSEMBLY | 1 | |
| 856A2775 | PULLER, OIL SUMP ASSEMBLY AND AIR HEATER COVER (PULLER) | 1 | |
| 856A2775G01 | Puller, Oil Sump Assembly and Air Heater Cover (puller) | 5 | |
| 856A2775G02 | PULLER - OIL SUMP ASSEMBLY AND AIR HEATER COVER | 1 | |
| 856A3416 G01 | Fixture Disassembly ‐ Rotating Air Seal | 3 | |
| 856A3416G01 | FIXTURE DISASSEMBLY ‐ ROTATING AIR SEAL | 3 | |
| 856A3794G01 | RING, HOLDING 2EACH(TO HOLD THE STAGE 1 OUTER STATIONARY AIR SEAL AND SHROUD SUPPORT ASSEMBLY DURING TRANSPORTATION OF THE LPT) | 9 | |
| 856A3798G01 | Puller, Oil Sump Assembly and Air Heater Cover (puller Config 3 | 4 | |
| 8721PK | CYLINDER ASSEMBLY REPAIR PARTS KIT- MALABAR NOSE TRIPOD JACK | 1 | |
| 8782PK | CYLINDER ASSEMBLY REPAIR PART KITS-35 TONS AXLE JACK | 1 | |
| 8860R | Dill Air Controls 8860R Hose & Chuck Assembly | 3 | |
| 90-590020-1 | PLUG ASSEMBLY - AIR SCO | 2 | |
| 9356726170 | AIR OIL EXCHANGER ASSEMBLY | 1 | |
| 9389-L | AIR PUMP ASSEMBLY | 1 | |
| 9446M71 | CART, ASSEMBLY-AIR REGULATOR | 1 | |
| 9461M37G01 | TEST STAND ASSEMBLY - LUBE SYSTEM AIRFLOW | 1 | |
| 9461M40G01 | TEST STAND, ASSEMBLY LUBE SYSTEM AIRFLOW | 1 | |
| 9461M40G05 | TEST STAND, ASSEMBLY - LUBE SYSTEM AIRFLOW | 1 | |
| 9461M40G06 | TEST STAND, ASSEMBLY - LUBE SYSTEM AIRFLOW | 1 | |
| 9560260520 | AIR INTAKE ASSEMBLY | 1 | |
| 956A3039G01 | Puller assembly no 4 bearing fwd rotating air seal | 1 | |
| 956A7015G01 | AIR DISTRIBUTOR DISASSEMBLY AND ASSEMBLY TOOLING (LEAP) | 3 | |
| 964C719-1 | AIR INSET ASSEMBLY FIXTURE | 1 | |
| 964C720-1 | AIR INSET ASSEMBLY FIXTURE | 1 | |
| 98DNSA20208120 | AIRBUS WHOLE NSA2020 SCHOOL ASSEMBLY SALES | 19 | |
| 98V36003000000 | PCE bleed air precooler exchanger disassembly tool | 5 | |
| 98V72003000000 | Fan air valve disassembly tool | 5 | |
| 99D57204162000 | Airbus A318/A319/A320/A321 Search Unit Guide Assembly 57-29-06-991-003-A. Material: Delrin | 4 | |
| A28003-94 | AIR MOVER ASSEMBLY | 1 | |
| A32123-1 | RIGGING ASSEMBLY - AIR/GROUND SENSORS, RIGHT HAND MAIN LANDING GEAR (MLG) | 9 | |
| A330-92396-0001 | POD REAR FAIRING SUPPORT WEDGE ASSEMBLY | 1 | |
| AA-535 | Alpha Aviation Model#535 Portable Aircraft Tail Post & Weight Assembly | 2 | |
| AB139-5160 | Barfield AB139-5160 Hose Assembly, For Aircraft | 2 | |
| AGE14968 | ASSEMBLY, FIXTURE, RAMAIR TEST, RAM AIR VALVE | 1 | |
| AGE15792 | RAM AIR TURBINE GROUND TEST MOTOR ASSEMBLY | 2 | |
| AGE17074A | RAM AIR TURBINE GROUND TEST MOTOR ASSEMBLY | 3 | |
| AID-01160 | AIR INLET ASSEMBLY SUPPORT AID | 1 | |
| AN816-3D | FITTING – ADT / CONNECTION FOR HOSE FITTING IN THE AIR DISTRIBUTION BOX OF THE ADT ASSEMBLY | 2 | |
| BEI3840 | SERIES MAIN AND NOSE WHEEL ADAPTER ASSEMBLY / AIRCRAFT | 1 | |
| BP7000 | UNIT ASSEMBLY-POWER, AIR/HYDRAULIC | 6 | |
| C07004-2 | ASSEMBLY, PAD AIRCRAFT JACKING AFT | 9 | |
| C10515 | ASSEMBLY REPAIR KIT | 1 | |
| C32032-102 | Air Hydraulic Pump Assembly | 1 | |
| C57003-1 | PRESSURE TEST DOOR ASSEMBLY - AIRPLANES WITH PRODUCTION WINGLETS, C57003-3 OR -51 (INCLUDED IN C57003 TEST EQUIPMENT) | 5 | |
| C57003-3 | PRESSURE TEST DOOR ASSEMBLY - AIRPLANES WITH PRODUCTION WINGLETS, | 1 | |
| C57003-49 | PRESSURE TEST DOOR ASSEMBLY - AIRPLANES WITH PRODUCTION WINGLETS, C57003-3 OR -51 (INCLUDED IN C57003 TEST EQUIPMENT) | 2 | |
| C57003-51 | PRESSURE TEST DOOR ASSEMBLY - AIRPLANES WITH PRODUCTION WINGLETS, | 1 | |
| C71016-1 | Repair Equipment - Inlet Assembly | 1 | |
| CF65B40907 | CHECK FIXTURE - PRESSURE RELIEF VALVE ASSEMBLY, AIR CONDITIONING | 1 | |
| CP9361 | AIR SCRIBE STYLUS, HOSE & FILTER ASSEMBLY | 4 | |
| CS-235-AVK | MAINTENANCE STAIR ASSEMBLY | 1 | |
| CTE6075 | CART, ASSEMBLY-VACUUM AIR FLOW_318KG/1372X1219X864MM_[CTE6075] | 4 | |
| CTR714-50R | REPAIR MOTOR ASSEMBLY | 1 | |
| DMC1298 | DMC1298 MIL-C-24308 Connector Assembly Repair Kit | 2 | |
| E000004SS1441R | HOSE ASSEMBLY RUBBER 4 REPAIR PUMP | 1 | |
| EDT1300 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EDT1305-0 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EDT1305-PLUS | AIR PUNCH ADAPTER ASSEMBLY, SIZES 5/32-1/2 | 1 | |
| EDT1306-0 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EDT1308-0 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EDT1310-0 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| EDT1312-0 | AIR PUNCH ADAPTER ASSEMBLY | 1 | |
| F52485--500 | PROTRACTOR ASSEMBLY - AIRPLANE CONTROL SURFACES | 7 | |
| F52485-500 | PROTRACTOR ASSEMBLY - AIRPLANE CONTROL SURFACES | 7 | |
| F70043 | Gauge Assembly - Airplane Attitude | 6 | |
| F70146-11 | Plug assembly-air cond intercooler ram air inlets | 4 | |
| F70146-12 | Plug assembly-air cond intercooler ram air inlets | 4 | |
| F71138-501 | Adapter assembly aircraft jacking point | 1 | |
| F72706 | Sling assembly aircraft maintenance stabilizer hoisting | 5 | |
| F72777 | RAIL EXTENSION ASSEMBLY -0 FWD AIRSTAIRS USED | 1 | |
| F80000-6 | ADAPTER ASSEMBLY AIRCRAFT JACKING | 1 | |
| F80000-7 | ADAPTER ASSEMBLY -AIRCRAFT JACKING -FORWARD | 24 | |
| G07005-1 | ADAPTER ASSEMBLY, AIRCRAFT JACKING - POINTS IV AND V | 5 | |
| G07006-1 | ADAPTER ASSEMBLY, AIRCRAFT JACKING - POINTS VII AND VIII | 2 | |
| G07015-1 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 583 | 1 | |
| G29009-1 | PROTECTIVE EQUIPMENT - RAM AIR TURBINE (RAT) LOWER TURBINE GEARBOX ASSEMBLY | 2 | |
| G52006-1 | TOOL - AIRSTAIR BRAKE ASSEMBLY | 1 | |
| G57012-1 | ADAPTER ASSEMBLY - AIRCRAFT JACKING WBL 585 | 4 | |
| GS20882-1 | AIR BAG ASSEMBLY | 2 | |
| GSE1000170 | AIR CYCLE EXHAUST COVER ASSEMBLY | 1 | |
| GSE1000538 | AIR PYLON PLUG ASSEMBLY-GSE1000538 | 1 | |
| GSE1000545 | LEFT RAM AIR SCOOP PLUG ASSEMBLY (1159SEMP20298)-GSE1000545 | 1 | |
| GSE2420380 | RAM AIR TURBINE GROUND TEST MOTOR ASSEMBLY | 1 | |
| H-1026-07.0 | TRONAIR H-1026*07.0 REPLACEMENT ASSEMBLY LANYARD | 4 | |
| H1012-2S | 18 INCH AIR HOSE ASSEMBLY | 1 | |
| HCS2021-01 | AIR FILTER/TRAP ASSEMBLY | 2 | |
| HLA5959 | Hose Assembly for Air Supply to Jacks for Standard Valve | 1 | |
| HLA5960 | Hose Assembly for Air Supply to Jacks for High Flow Valve | 1 | |
| HU89024-1 | BLANK ASSEMBLY - VENTILATION AIR INTAKE COWL | 10 | |
| IFX-5500 | AIR PUMP INLET FILTER EXTENSION HOSE AND TRIPOD ASSEMBLY | 1 | |
| J32108-16 | VALVE ASSEMBLY,HYDRAULIC,AIRCRAF | 12 | |
| K-1410 | Tronair K-1410 Replacement Compressor Washer Hose Assembly | 4 | |
| K-1411 | Tronair K-1411 Replacement Compressor Washer Wand Assembly | 5 | |
| LT 82-1E | Hand Held Probe Assembly for Airbus Manh | 1 | |
| LTCT25499-01 | Bleed Air Valve Assembly | 1 | |
| LTCT25548-01 | Fairing Assembly, Referee Nozzle and Core Cowl | 1 | |
| LTCT25561-01 | Screen Assembly, Air Inlet | 1 | |
| LTCT25563-01 | Probe Assembly, Air Inlet | 1 | |
| LTCT30608-01 | Air Valve and Plug Assembly | 1 | |
| LTCT7558-01 | AIR DIFFUSER ASSEMBLY | 1 | |
| M0NT23525 | TOOL FOR ASSEMBLY OF AIRFLON BALL JOINT ON THE ROD | 1 | |
| M65726787-010 | AIR CYCLE MACHINE ASSEMBLY REMOVAL TOOL | 1 | |
| MG174-04 | BRAKE DISS-ASSEMBLY TOOL - AIRBUS | 35 | |
| MH13 | MEYER HYDRAULICS Hydraulic Hose Assembly, For A514 Aircraft Only | 3 | |
| MIT65B40500-1 | ADAPTER ASSEMBLY - VERTICAL FIN LAMB AIR MOVER | 1 | |
| MK7ATIS-001 | AIRCRAFT TIRE INFLATION HOSE ASSEMBLY | 2 | |
| MST-80 | PRESURE SENSOR FOR PZL M-18 AIRCRAFT (ASSEMBLY: HYDRAULIC POWER) | 1 | |
| MT147-1 | AIR BLEED TOOL ASSEMBLY - MAIN ROTOR SPINDLE | 1 | |
| NB2604-RHC | AIR HOSE ASSEMBLY, 18" / 450MM LENGTH COMPLETE WITH UNIVERSAL HANDSTOCK ADAPTER ASSEMBLY (FOR DIRECT | 1 | |
| NC295-HAS | HOSE ASSEMBLY SET, METALLIC AND NONMETALLIC; GSE OF CASA-295 AIRCRAFT; HOSE SET | 1 | |
| NTG2604-D | UNIVERSAL ADAPTER FITS (S) 8V (L)12V SIZE VALVES (450MM AIR HOSE ASSEMBLY ) | 6 | |
| OH58-175 | BLEED AIR FILTER ASSEMBLY CAP/COVER (Westar STC) | 1 | |
| OHME65B00002 | SLING ASSEMBLY - TETHERING/LIFTING, AIRPLANE RECOVERY | 1 | |
| OHME65B01519-1 | OVERHEAD EQUIP SLING - ACTUATOR ASSEMBLY NOSE GEAR STEERING - USED ON ALL 747 AIRPLANES. OHME65B01519-1 IS USED TO REMOVE AND INSTALL THE NOSE GEAR STEERING ACTUATORS. | 3 | |
| P4-01-0033-210 | POWER UNIT ASSEMBLY AIR CRUISERS CMM, D31591-488 AND SUBS ATA: 25-60-59-01-22 | 3 | |
| PAF45180P | MEYER HYDRAULICS Pump Assembly, For AJS5 Aircraft Jack | 2 | |
| PLZ-00123 | AIR INLET INSPECTION ASSEMBLY FIXTURE | 1 | |
| PWA 85312 | HEATER, ELECTRICAL - HPC ROTOR ASSEMBLY REAR HUB (AIR SEAL FLANGE) | 1 | |
| PWA107781 | AIRFLOW COVER ASSEMBLY | 1 | |
| PWA211430 | STAND, TRANSPORT - ENGINE ASSEMBLY - AIR/TRUCK | 4 | |
| PWA45363 | REGULATOR ASSEMBLY, AIR PRESSURE | 1 | |
| PWA85036 | AIRFLOW CHECK NO. 1 BEARING (CARBON) SEAL ASSEMBLY | 1 | |
| PWC50214 | LOCATOR, TURBINE STATOR AIR SEAL ASSEMBLY | 5 | |
| R67G36E-40M | AIRCRAFT GROUND POWER ASSEMBLY (6 POLE,260AMP,400HZ,40FT) | 1 | |
| RB6897861 | Bleed Air Manifold Assembly Shroud Puller | 2 | |
| RB6899940 | Bleed Air Manifold Assembly Compressor Shroud Puller | 1 | |
| RBT18502 | 407 Restraint Sprag Assembly Repair Kit | 2 | |
| RRT104638 | ASSEMBLY TOOL - INSTALLATION / REMOVAL OF LOWER SPLITTER FAIRING. | 1 | |
| SB‐117D2‐53‐005‐2C1 | TAIL BOOM ASSEMBLY (TDS) FAIRING ANGLES - KIT 1 | 1 | |
| SB‐117D2‐53‐005‐2C2 | TAIL BOOM ASSEMBLY (TDS) FAIRING ANGLES - KIT 2 | 1 | |
| SSX2712-40 | AIRFILTER ASSEMBLY | 1 | |
| SSX2777-11 | AIR HOSE ASSEMBLY | 1 | |
| SVT270BRK | PUMP HEAD ASSEMBLY REPAIR KIT | 1 | |
| T566743 | DUCT ASSEMBLY, AIR INLET | 1 | |
| UAS90 | UAS UNIVERSAL ASSEMBLY/DISASSEMBLY STAND FOR AIRCRAFT SPLIT WHEEL | 1 | |
| V7950-93-114 | AIR START COUPLING ASSEMBLY WITH HOSE BARB CONNECTOR | 1 | |
| WT54187 | ASSEMBLY REPAIR | 1 | |
| WT54994 | ASSEMBLY REPAIR | 1 | |
| XP125T-47 | AIR/OIL SEPARATOR ASSEMBLY-EPA | 1 | |
| Z-5899-1 | ASSEMBLY, AIR PUMP | 3 | |
| Z5899-1 | PUMP: AIR,ASSEMBLY, | 3 | |
| f 80000-6 | adapter assembly aircraft jacking | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
