| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A52008-15-F | AFT PIN | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 3A2984-1 | PIN-SAFETY, SLIDE AND SLIDE/RAFT (CALIBRATION) | 1 | |
| (CALIB) 700–T039–79 | FUEL CELL SUMPING PROBE AFT (CALIBRATION) | 1 | |
| 001U545A0200000 | Centering Pins, Set, Aft Engine Cowling | 1 | |
| 01-0705-0002 | AIRCRAFT ATTACHMENT HEAD (PIN TYPE) | 1 | |
| 0U146829 | SHAFT FOR REGULATING PINION | 1 | |
| 101996 | ALIGNMENT PIN (BEECHCRAFT CORP) | 1 | |
| 101996 PIN OR 101-120125-1D943 | ALIGNMENT PIN (BEECHCRAFT CORP) | 1 | |
| 109-3900-14-1 | JACKING PINS AFT | 1 | |
| 11-03158 | 3-PIN AIRCRAFT EXTERNAL POWER PLUG | 3 | |
| 111275-1 | AFT MOUNT PIN | 1 | |
| 114-1248 | BF GOODRICH CO THE AEROSPACE DIV AIRCRAFT WHEEL AND BRAKE BRAKE PUMPING ATTACHMENT | 3 | |
| 114-380069-0003 | FLIGHT CONTROL RIG PIN (ELEVATOR, AILERON, AFT RUDDER) | 1 | |
| 12MIT65B00713 | ALIGNMENT PIN - AFT MOUNT YOKED ENGINE | 1 | |
| 12MIT65B00713- | ALIGNMENT PIN AFT YOKE MOUNT | 1 | |
| 141W6314-16 | SPINDLE ASSY-SPRT AFT NLG WHEEL WELLDOOR | 1 | |
| 36453 | PINON SHAFT: STG 1, | 2 | |
| 1505387 | TOW BAR SHEAR PIN TO SUIT CLYDE AIRCRAFT TOW BAR | 6 | |
| 1505388 | TOW BAR SHEAR PIN TO SUIT CLYDE AIRCRAFT TOW BAR | 6 | |
| 15O5388 | TOW BAR SHEAR PIN TO SUIT CLYDE AIRCRAFT TOW BAR | 6 | |
| 161A1192-13 | PIN ASSY - AFT TRUNNION BEARING | 1 | |
| 21-08 | HAIRPIN COTTER ZINC 7/8-1Ó SHAFT, 3-3/4 LONG | 1 | |
| 23004817 | COVER, TOWER SHAFT, SHIPPING, PLASTIC | 1 | |
| 23053534 | Wrench – Nut, Radial Drive Bevel Pinion Gear-shaft, PU Access Drive | 1 | |
| 23054772 | Holder – Radial Drive Bevel Pinion Gear-shaft | 1 | |
| 23083864 | SUPPORT, AFT, DIFFUSER TO SHIPPING STAND | 1 | |
| 240-880 | CRANKSHAFT LOCKING PIN M8X50 240-880 | 1 | |
| 25-04 | SAFTY PIN ZN .058X1 3/4 | 1 | |
| 27T109846-RT-012 | PIN KIT, AIRCRAFT RIGGING | 1 | |
| 2C14252 | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | 1 | |
| 2C14252 REV B | TOOL, LAPPING-HIGH PRESSURE TURB. ROTOR SHAFT | 1 | |
| 2C14252G01 | HPTR ROTOR DISK/SHAFT LAPPING TOOL | 1 | |
| 2C5235G01 | Power Lever Shaft Rigging Pin | 1 | |
| 2C5699 | FIXTURE, AFT FAN SPINNER | 1 | |
| 2C5699G01 | Fixture, Aft Fan Spinner Support | 1 | |
| 2C6176 | CONTAINER, SHIPPING- FAN MID/FWD SHAFTS | 1 | |
| 2C6176 REVF | CONTAINER, SHIPPING- FAN MID/FWD SHAFTS | 1 | |
| 2C6I76 | CONTAINER, SHIPPING- FAN MID/FWD SHAFTS | 1 | |
| 2C81054 | PIN - MOUNTING - AFT | 1 | |
| 3170010-1 | AFT TRUNNION PIN REMOVAL TOOL | 1 | |
| 332A93-3111-00 | FLAPPING AXIS HAFTING TOOL | 1 | |
| 332A93-3125-01 | BEARING/SPINDLE HAFTING TOOL | 1 | |
| 337-030 | OVER-THE-TOP CANOPY COVER, BELLY STRAP TYPE (24" fwd extension, 12" wingroot extension, earlier round aft spinner base) | 1 | |
| 337-035 | OVER-THE-TOP CANOPY COVER, BELLY STRAP TYPE (24" fwd extension, 12" wingroot extension, later oblong aft spinner base) | 1 | |
| 337-040 | EXTENDED CANOPY COVER, over-top type, BELLY STRAP TYPE (24" fwd extension, 12" wingroot extension, earlier round aft spinner base) | 1 | |
| 337-835 | TRAVEL COVER, Light Weight Travel Over-The-Top Canopy Cover, Belly Strap Type (24" Fwd Extension, 12" Wingroot Extension, Earlier Round Aft Spinner Base) | 1 | |
| 337-840 | TRAVEL COVER, Light Weight Travel Over-The-Top Canopy Cover, Belly Strap Type (24" Fwd Extension, 12" Wingroot Extension, Later Oblong Aft Spinner Base) | 1 | |
| 3401238-1 | ADAFTER ASSY, TORQUE, MLG DRAG PIN BUSHING 1 | 2 | |
| 350A93-3323-00 | STATIONARY STAR/SPIN TABLE HAFTING | 1 | |
| 395-887-00 | Outside, Pinion Shaft | 1 | |
| 3A2984-1 | PIN-SAFETY, SLIDE AND SLIDE/RAFT | 3 | |
| 429BF-3000-2 | AFT PIN ASSEMBLY | 1 | |
| 4514080002-009 | FLIGHT CONTROL RIG PIN - ELEVATOR AFT | 2 | |
| 460005835 | AFT PINTLE SPHERICAL BEARING | 45 | |
| 636-1000-32GSE | BLOCKING DEVICE - AFT ENGINE MOUNT PIN | 6 | |
| 636-1000-33GSE | PW & CFM PIN EXTRACTOR - ENGINE MOUNT AFT | 5 | |
| 636-1000_33GSE | SHAFT EXTRACTOR - REAR ENGINE MOUNT PINS | 5 | |
| 700-T-039-79 | FUEL CELL SUMPING PROBE AFT | 1 | |
| 700-T-290-053 | AUXILIARY FUEL CELL SUMPING PROBE (AFT) | 1 | |
| 700???T039???79 | FUEL CELL SUMPING PROBE AFT | 1 | |
| 700T03979 | AUX FUEL CELL SUMPING PROBE AFT | 1 | |
| 700–T039–79 | FUEL CELL SUMPING PROBE AFT | 1 | |
| 701-2978000 | SAFETY PIN AFT PASSENGER DOOR | 32 | |
| 72141 | STUBSHAFT FLUSH PIN GAGE | 1 | |
| 8011457-508 | CENTERING SHAFT CRIMPING TOOL | 1 | |
| 856A 2355P01 | PIN LOCATING AFT OIL SUMP | 1 | |
| 856A1213 | PIN SET HPTR DISK TO AFT SHAFT | 1 | |
| 856A1213G01 | Pin Set, Alignment - HPT Rotor Disk to Shaft | 10 | |
| 856A2355P01 | PIN, LOCATING - AFT OIL SUMP (LOCATING PIN | 1 | |
| 856A3338G02 | CONTAINER, SHIPPING - LPT SHAFT | 1 | |
| 856A3778G01 | AFT SPINNER GUIDE PINS | 23 | |
| 856A3915 | PIN LOCATING AFT OIL SUMP | 1 | |
| 856A3915G01 | PIN LOCATING AFT OIL SUMP | 4 | |
| 9.8321E 12 | FWD-AFT PINTLE R-I TOOL | 1 | |
| 98335A049 | HITCH PIN 1/4-1/2SHAFT, 1-5/16 LG ST ZN. PL | 1 | |
| 98A27108025000 | RIGGING PIN-DROOP DRIVE LAYSHAFT | 2 | |
| 98A32301015000 | EXTRACTOR-HINGE PIN-ACTUATING CYLINDER AIRCRAFT STRUCT | 6 | |
| 98A52107632000 | Pin saftey slide | 26 | |
| 98A521080007950 | PIN RIGGING ASSY, AFT DOOR RH | 1 | |
| 98A55307626500 | MILLING AND CRIMPING DEVICE BEARING AFT | 1 | |
| 98D27504030001 | FLAPS/SLATS TORQUE SHAFT LOCK (CLAMPING DEVICE) | 26 | |
| 98D32104190001 | MLG FWD & AFT PINT PIN R/I | 23 | |
| 98D32104190002 | MLG FWD & AFT PINT PIN R/I | 19 | |
| 98D32203502000 | SAFTY PIN - NLG DOOR | 39 | |
| 98D57004008000 | TOOLR/I BUSH AFT PIN | 1 | |
| 98D57004080000 | TOOL-R/I AFT PIN | 1 | |
| 98F29208457000 | Saftey pin rat | 18 | |
| 98F32104000000 | REM-INST TOOL, PINTLR PINS (AFT) | 8 | |
| 98F52308354000 | PIN-RIGGING-CARGO DOOR,SHAFT LEVER | 6 | |
| 98F52308356000 | Rigging pin FWD and AFT cargo-doorinterlock mechanism | 11 | |
| 98F52308357000 | Rigging pin-FWD and AFT cargo -door latching mechanism | 11 | |
| 98F52308358000 | Rigging pin FWD and AFT cargo-doorlatching mechanism | 9 | |
| 98S76000003012 | PIN ASSY PVM AFT LEVER | 1 | |
| 98V27508832000 | Drive shaft positioning pin | 9 | |
| 98V32104008000 | EXTRACTOR - MLG AFT PINTLE PIN | 3 | |
| 98V32104033000 | GUIDE AFT PINTLE X-PIN | 3 | |
| 98V57004009000 | R/I KIT - AFT PINTLE BUSH | 1 | |
| 98V57004018000 | R/I KIT, AFT PINTLE BUSHES | 1 | |
| 98V57004035000 | SPANNER AFT PINTLE | 1 | |
| 99-8039-4010 | TRONAIR 99-8039-4010 – NOSE LANDING GEAR DOOR GROUND LOCK PIN FOR DASH 8 AIRCRAFT | 3 | |
| 9C1361G01 | FIXTURE, SPINNER AND SPINNER AFT SUPPORT RING | 1 | |
| A0145-03 | TOOL - AIRCRAFT TP PIN ALERT TAPE | 1 | |
| A3-06-1007 | SAFETY PIN RAFT | 1 | |
| A32026-60 | EQUIPMENT - REMOVAL/INSTALLATION, MLG AFT TRUNNION PIN | 11 | |
| A32026-60 | MLG AFT TRUNNION PIN PULLER | 11 | |
| A32103-1 | LOCKOUT PIN - FORWARD AND AFT LOCK LINK, RETRACTABLE TAIL SKID | 1 | |
| A35001-10 | OXYGEN GENERATOR SAFTEY PIN (SET) | 21 | |
| A52008-15 | AFT PIN ASSY | 1 | |
| A52019-1 | DRIVER SET - HINGE PIN, MAIN CARGO DOOR_B777 FORWARD AND AFT CARGO DOOR AND SMALL CARGO DOOR_[A52019-1] | 14 | |
| A5210763200000 | PIN SAFTY SLIDE | 7 | |
| AF-4228/4F | Rigid Surface probe, Absolute Reflection, 90° Degrees, Shielded, .125"Ø tubing with a 4mm(.156") diameter tip, .300" Drop with a 70mm(2.75") Shaft Length and 3.0" Long Handle for a total Length of 5.75" Long Supplied with a 4 Pin Fischer Connector. Freque | 1 | |
| AF-5014 | ROHMANN HIGH FREQUENCY PROBE, STRAIGHT SHAFT SHIELDED. ABSOLUTE REFLECTION, 100KHz-6MHz WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance.(ASP05400) | 1 | |
| AF-5016 | ROHMANN HIGH FREQUENCY PROBE, STRAIGHT SHAFT SHIELDED. REFLECTION / BRIDGE, 500KHz-8MHz WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5220-.156/.5T-3.5WL | FLEXIBLE SHAFT ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .156"-.187", .500" LONG TIP, 3.5" WORKING LENGTH ( NO SLEEVE). SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5271 | CUSTOM FLEX SHAFT PROBE, 9.8mmØ(.386") 500KHz, 12.20"(310mm) LONG SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. Reference: Airbus A300-600 Part 6 57-10-35 page 606 Figure 604 | 1 | |
| AF-5300-.125SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .125"Ø-.156"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.156SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .156"Ø-.187"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.187SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .187"Ø-.250"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.250SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .250"Ø-.312"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.312SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .312"Ø-.375"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.375SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .375"Ø-.437"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AF-5300-.437SE/1T-6L | FLEXIBLE SHAFT WITH SPRING ROTARY PROBE, SPLIT END,100KHz-2MHz. EXPANDABLE FROM .437"Ø-.500"Ø, 1.0" LONG TIP, 6.0" LONG. SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AFK-AUR12SS-1 | Open Hole Eddy Current Probe Kit, total of 12 stainless steel rotary probes with a shaft length of 70mm long supplied with a universal 4 pin Fischer connector. Probe Diameters: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2. Suppli | 1 | |
| AGE-00802-001 | WRENCH-ECCENTRIC PIN, EMERGENCY DOORADJUST THE ECCENTRIC SHAFT | 1 | |
| AGE-02062-401 | PIN SET, RIGGING- AIRCRAFT | 1 | |
| AGE-04714-401 | PINS, SET-RIGGING, AIRCRAFT | 5 | |
| AGE-05422-401 | Pins. Set Aircraft Cable Rigigng | 3 | |
| AGSE-E27209-S01 | AFT MOUNT/SHIPPING ADAPTER | 1 | |
| AGSE-E27209-S02 | AFT MOUNT/SHIPPING ADAPTER | 1 | |
| AM2011-1 | PIN, QUICK RELEASE AFT | 1 | |
| AM2563-313 | SAFETY PIN (AFT LOCKING) | 1 | |
| AN2551 | 28 VDC - 3 Pins Aircraft Plug | 2 | |
| AP-7/4F | STRAIGHT SHAFT RIGID SURFACE PROBE, ABSOLUTE SHIELDED, .187"Ø 50-500KHz SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.5" WORKING LENGTH WITH A 7.0" OVERALL LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| AP-93-5B/2-12K/4F | SURFACE PROBE 90° DEGREES, .187"Ø TUBING .300" DROP 5.0" LONG BENT SHAFT, 4 PIN FISCHER CONNECTOR.2-12KHZ DIFFERENTIAL. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-7/4F | STRAIGHT SHAFT RIGID SURFACE PROBE, ABSOLUTE SHIELDED, .125"Ø 50-500KHz SUPPLIED WITH A 4 PIN FISCHER CONNECTOR, 4.5" WORKING LENGTH WITH A 7.0" OVERALL LENGTH. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-903-6/500K/7L | Absolute Shielded / Bridge Pencil Probe. , 200 kHz - 1 MHz with a center frequency of 500 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length supplied with a 7 Pin Fischer/LEMO "PowerLink" connector. Includ | 1 | |
| APN-92-4FX/7L | FLEXIBLE COPPER SHAFT PENCIL SURFACE PROBE. 50-500KHz 90° DEGREES .200" DROP 4.0 " LONG. 7 Pin LEMO CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APN-95-10/7L | ABSOLUTE BRIDGE RIGHT ANGLE. 10.0” LONG. 100KHZ-500KHZ. 0.125IN. (3.17MM) SHAFT SIZE. 7-Pin-LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance..... | 1 | |
| APN-95-6/7L | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. I | 1 | |
| APNR-3/7L | ABSOLUTE REFLECTION STRAIGHT SURFACE PROBE. 3” LONG. 50KHZ-500KHZ. 0.125IN. (3.17MM) SHAFT SIZE. 7-Pin-LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| APNR-45-6/7L | SURFACE PROBE, ABSOLUTE REFLECTION ANGLE SHAFT. 6.0” LONG. 45 DEG TIP. 0.5 IN. (12.7MM) DROP. 50KHZ-500KHZ. 0.125"Ø (3.17MM) SHAFT WITH A 7 PIN LEMO POWERLINK CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AST4844 | CAMSHAFT SPR HOLDING TOOL PINS | 1 | |
| AT56026 | Aft pintle spherical bearing lifting/installation tool | 1 | |
| AT56356 | PINTLE-AFT,SPHERICAL BEARING ASSEMBLY TOOL | 1 | |
| AUR-.187/6FX | UNIVERSAL ROTARY PROBE, 100KHz-2MHz, FLEXIBLE SHAFT, SPLIT END, .187"OD, 6.0" WORKING LENGTH, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.125SS-.75T/4WL | STAINLESS STEEL FLEX SHAFT PROBE, 100KHz-2MHz, 20mm(.787") TIP LENGTH,1/8"Ø ( .125"), 4.0"(101.6mm) WORKING LENGTH SUPPLIED WITH A 4 PIN FISHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.156SS-.75T/4WL | STAINLESS STEEL FLEX SHAFT PROBE, 100KHz-2MHz, 20mm(.787") TIP LENGTH, 5/32"Ø ( .156"), 4.0"(101.6mm) WORKING LENGTH SUPPLIED WITH A 4 PIN FISHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.187SS-.75T/4WL | STAINLESS STEEL FLEX SHAFT PROBE, 100KHz-2MHz, 20mm(.787") TIP LENGTH, 3/16"Ø ( .187"), 4.0"(101.6mm) WORKING LENGTH SUPPLIED WITH A 4 PIN FISHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.218SE/.5T/4WL | ADJUSTABLE FLEX SHAFT ROTARY PROBE, SPLIT END, .218"-.250", 0.500" LONG TIP, 4.0" WORKING LENGTH ( NO SLEEVE). 4 PIN FISCHER CONNECTOR 100KHz-2MHz. Includes Test Report and Certificate of Conformance. | 1 | |
| AURFX-.250/.75T/4WL | FIXED DIAMETER FLEX SHAFT ROTARY PROBE,.250"Ø, 100KHz-2MHz, .750" LONG TIP, 4.0" WORKING LENGTH ( NO SLEEVE) SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.340-.400/12.0WL-C | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .340"-.400"OD, 12.0" WORKING LENGTH WITH A GUIDE COLLAR ON THE SHAFT, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| AURY-.530-.590/12.0WL-C | UNIVERSAL ADJUSTABLE ROTARY Y-PROBE, 100KHz-2MHz, SPILT END, .530"-.590"OD, 12.0" WORKING LENGTH WITH A GUIDE COLLAR ON THE SHAFT, SUPPLIED WITH A 4 PIN FISCHER CONNECTOR. Includes Test Report and Certificate of Conformance. | 1 | |
| B32069 | LOCKOUT PIN -0 FWD & AFT LOCK LINK, RETR TAIL | 1 | |
| B32069-1 | Lockout Pin - Fwd & Aft Lock Link | 1 | |
| B32069-8 | LOCKOUT PIN - FORWARD AND AFT LOCK LINK, RETRACTABLE TAIL SKID | 6 | |
| B52009-1 | SAFTY PIN DOOR QTY 6 | 19 | |
| C16619-101 | PIN - SLIDE-RAFT TRANSPORT LOCKING | 1 | |
| C23031-22 | EQPT - Removal/Installation, MLG AFT Trunnion Pin | 1 | |
| C27057-5 | PIN -0 AFT | 1 | |
| C27085-19 | Center Shaft Pin | 1 | |
| C27085-2 | Aft Pin Puller Assembly | 1 | |
| C32023-1 | MLG AFT TRUNNION PIN RAI TOOL | 10 | |
| C32031 | REMjINSTL EQPT AFT TRUNNION PIN MLG | 1 | |
| C32031-1 | Removal/Installation Equipment - Aft Trunnion Pin, Main Landing Gear | 18 | |
| C32031-22 | Removal/Installation Equipment - Aft Trunnion Pin, Main Landing Gear | 11 | |
| C32031-3 | RMVL/ INTSL EQUIP – AFT TRUNNION PIN -MLG ( C32031-1 KIT) | 3 | |
| C32031-4 | RMVL/ INTSL EQUIP – AFT TRUNNION PIN -MLG ( C32031-1 KIT) | 4 | |
| C32031-5 | RMVL/ INTSL EQUIP – AFT TRUNNION PIN -MLG ( C32031-1 KIT) | 4 | |
| C32031-6 | PULL NUT-R/I EQPT AFT TRUNNION PIN MLG | 2 | |
| C32031-7 | RMVL/ INTSL EQUIP – AFT TRUNNION PIN -MLG ( C32031-1 KIT) | 4 | |
| C32050-1 | Lockout Pin Assembly- Forward and Aft Lock Link, Tail Skid | 16 | |
| C32050-1 | LOCK OUT PIN ASSY, FWD and AFT LOCK PIN | 16 | |
| C32050-2 | Lockout Pin Assy - FWD & AFT Lock Link, Tail Skid | 5 | |
| C32061-1 | LOCKOUT PIN ASSEMBLY- FORWARD AND AFT LOCK LINK, TAIL SKID | 2 | |
| C35003-10 | OXYGEN GENERATOR SAFTEY PIN (SET) | 19 | |
| C71020-11 | AFT ARM PIN | 6 | |
| C71020-22 | AFT BOOTSTRAP PRESS PIN | 1 | |
| C71020-29 | AFT BRACKET PIN | 1 | |
| C71020-30 | AFT BRACKET COTTER PIN | 1 | |
| C71020-36 | Aft Engine Fitting Pin | 1 | |
| C71020-46 | AFT ARM PIN | 2 | |
| C71020-47 | AFT BEAM PIN | 2 | |
| C71020-48 | AFT ARM PIN | 1 | |
| C71020-49 | AFT BEAM PIN | 1 | |
| C71020-67 | AFT BEAM PIN | 2 | |
| C71020-68 | AFT BEAM PIN | 1 | |
| C71029-55 | AFT cross beam pin | 1 | |
| C71029-59 | AFT support arm pin | 1 | |
| C71029-63 | AFT engine fitting pin | 1 | |
| CJMD827-005 | TOOL AFTER RUDDER RING PIN | 2 | |
| D17961-101 | SLIDE RAFT PIN TOOL | 14 | |
| D23156000 | SAFTY PIN | 34 | |
| D3214022000200 | AFT PINTLE PIN NUT | 1 | |
| DAC321 | USED TO COOL AIRCRAFT ON THE RAMPIN THE MAINTENANCE HANGAR. | 1 | |
| DRT67804-16 | LINE-UP PIN, AFT PINTLE PIN | 1 | |
| DRT69275 | SPANNER - AFT SS LOWER CARDAN PIN | 1 | |
| DRT69312 | SPANNER, AFT SIDE STAY UPPER CARDAN PIN | 2 | |
| DRT69340 | GUIDE - SIDE STAY AFT CARDAN PIN UPPER | 1 | |
| DRT69343 | GUIDE - AFT LOWER CARDAN PIN ASSEMBLY | 1 | |
| DRT69373 | GUIDE - AFT LOCK LINK CARDAN PIN | 1 | |
| DRT69388 | PIN INSTALLATION - AFT PINTLE | 1 | |
| DRT69489 | GUIDE - S STAY AFT CARDAN CROSS PIN | 2 | |
| DRT69490 | GUIDE - AFT BRACES CENTER PIN | 2 | |
| DRT69521 | SOCKET, AFT PINTLE CROSS PIN | 2 | |
| DRT69530 | SPANNER, AFT LOWER CARDAN PIN | 1 | |
| F16-100 | INTAKE PLUG, narrow mouth, bi-fold type, NSN 1730-01-542-3476 "COVER SET,AIRCRAFT SHIPPING" | 1 | |
| F27448000 | CENTERING SHAFT CRIMPING TOOL | 1 | |
| F2MB971030010 | EXTRACTOR OF ENGINE AFT PINS | 1 | |
| F2MB971030020 | TOOL FOR CENTERING OF ENGINE AFT PINS | 1 | |
| F32155021000 | AFT PINTLE PIN LH | 1 | |
| F3215502100000 | AFT PINTLE PIN - LH | 1 | |
| F3215502100100 | AFT PINTLE PIN - RH | 1 | |
| F5453255320000 | PIN ( AFT MOUNT UPR) | 1 | |
| F70207-93 | Aircraft Rig Pin Kit | 4 | |
| F70310-1 | Puller kit-wing bottle pin & bushing removal FWD & AFT | 5 | |
| F80-0-5881 | PIN/SHAFT ASSEMBLY FIXTURE | 1 | |
| F80153-1 | SAFTEY PIN | 17 | |
| F80157-1 | Wrench -Aft Airstairs Handrail Hinge Pin | 1 | |
| FB70000-113 | SPARES-AFTERMARKET JACK PIN 3/-5/-7/V2500/-5C2 | 1 | |
| FB70000-2-102 | SPARES-AFTERMARKET CRADLE TO BASE PIN WITH CHAIN | 1 | |
| FB70077-1-85 | AFT TRUNNION PIN | 1 | |
| FDOO03D236540 | SAFTEY PIN | 1 | |
| FDOO04D236640 | SAFTEY PIN | 1 | |
| FE374120000 | Saftey Pin | 6 | |
| G34002-46 | PINION SHAFT | 1 | |
| G71001-43 | PIN -0 AFT SUPPORT | 1 | |
| GS19646-1 | PIN , DRAFT | 3 | |
| GSB2700008-24 | RIG PIN SET - AFT BAGGAGE | 1 | |
| GSB270008-24 | RIG PIN SET - AFT BAGGAGE | 1 | |
| GSE55759 | Aft axle unlock actuator safety pin | 1 | |
| GSE55759 NC | AFT AXLE STEERING SAFETY PIN | 1 | |
| GSE55759 REVA | AFT AXLE STEERING SAFETY PIN & Block | 1 | |
| GSE55759REVA | AFT AXLE STEERING SAFETY PIN | 1 | |
| GSE55929 | Aft axle pivot pin retaining nut wrench | 1 | |
| GSE55930 | Aft axle steering actuator pin guide bullet | 1 | |
| GSE55974 | Aft axle pivot pin guide bullet | 1 | |
| GSE56042 | Aft pintle pin lifting tool | 1 | |
| GSE56082 | WRENCH AFT PINTLE | 1 | |
| GSE56144 | TORQUE REACTOR PIN,FWD & AFT BRAKE RODS BODY LANDING GEAR | 1 | |
| GSE56509 | TOOL-R/I, BEARING AFT PINTLE, WLG | 1 | |
| GSE57669 | PIN-SAFETY,AFT AXLE STEERING,BLG | 1 | |
| GSE57669NC | PIN-SAFETY,AFT AXLE STEERING,BLG | 1 | |
| GSE57866 | GUIDE, BOGIE PITCH TRIMMER PIN AFT | 1 | |
| HU29649 | PIN - GUIDE LP COMPRESSOR SHAFT | 1 | |
| HU31902 | PIN - ALIGNMENT FAN DISK TO SHAFT | 2 | |
| HU43122 | PIN,TURN VIGV CRANKSHAFT | 1 | |
| J07011-10 | BRACE PIN - AFT | 1 | |
| J20003-1 | PIN SET – RIGGING AIRCRAFT APPLICATION | 3 | |
| J20003-34 | PIN SET – RIGGING AIRCRAFT APPLICATION | 15 | |
| J32036 | REMV'L & INST'L EQUIPMENT - AFT TRUNNION PIN MLG | 1 | |
| J32036-19 | Rem/Inst Equipment - Aft Trunnion, Pin MLG | 1 | |
| J32036-2 | REMOVAL/INSTALLATION EQUIPMENT - AFT TRUNNION PIN, MAIN LANDING GEAR | 1 | |
| J32036-27 | REMOVAL/INSTALLATION EQUIPMENT - AFT TRUNNION PIN, MAIN LANDING GEAR | 8 | |
| J32036-55 | REMOVAL/INSTALLATION EQUIPMENT - AFT TRUNNION PIN, MAIN LANDING GEAR | 5 | |
| J32036-56 | REMOVAL/INSTALLATION EQUIPMENT - AFT TRUNNION PIN, MAIN LANDING GEAR | 5 | |
| J32036-57 | REMOVAL/INSTALLATION EQUIPMENT - AFT TRUNNION PIN, MAIN LANDING GEAR | 6 | |
| J32036-75 | R/I EQUIP AFT TRUNNION PIN MLG | 7 | |
| J32071 | LOCKOUT PIN-FWD & AFT LOCK LINK,RETR TAIL SKID | 1 | |
| J32071-10 | LOCKOUT PIN - FORWARD AND AFT LOCK LINK, RETRACTABLE TAIL SKID | 11 | |
| J47562-1 | Extractor, forestay/aircraft struct pin | 1 | |
| J57010-1 | Insertion equipment-aft hinge pin,folding wing tip | 2 | |
| J57011-1 | Spline protector-aft hinge pin，polding wing tip，removal and installation | 3 | |
| J71003-151 | AFT ATTACH PIN | 1 | |
| J71007-19 | Aft pin assy | 1 | |
| J71019-1 | SHIPPING STABILIZER - FWD AND AFT ENGINE MOUNT, RR ENGINE | 9 | |
| J71043-22 | AFT ATTACH PIN | 1 | |
| J71043-23 | AFT ARM FITTING PIN | 1 | |
| J71043-30 | AFT CRADLE ATTACH PIN | 1 | |
| J71043-68 | AFT CENTER PIN | 1 | |
| J71043-88 | AFT ATTACH PIN | 2 | |
| K1S | PIN POSITIONER (BEECHCRAFT CORP) | 9 | |
| K71001-66 | AFT main arm pin | 1 | |
| K71001-75 | Aft outbd load arm pin | 1 | |
| K71001-86 | Aft pylon pin | 1 | |
| K71001-87 | Aft inbd arm pin | 1 | |
| K71001-98 | Aft outbd arm pin | 1 | |
| K71002-63 | AFT BOOTSTRAP - REAR BEAM PIN | 1 | |
| L133M6503101 | LONG DRIVE SHAFT PIN EXTRACTOR | 2 | |
| LSPENFLX-4/2M | Surface Probe, Copper Shaft, Shielded, Ø.072" tip x 4" long, 1MHz-3MHz, 7-PIN LEMO NORTEC | 1 | |
| LSPENFLX-4/500K | Surface Probe, Copper Shaft, Shielded, Ø.072" tip x 4" long, 200KHz-1MHz, 7-PIN LEMO NORTEC | 1 | |
| LSPENFLX95-5 | Surface Probe, Copper Shaft, Shielded, Ø.072" tip x .5" Drop x 5" long, 50-500KHz, 7-PIN LEMO NORTEC | 1 | |
| LSPENFLX95-8 | Surface Probe, Copper Shaft, Shielded, Ø.072" tip x .5" Drop x 8" long, 50-500KHz, 7-PIN LEMO NORTEC | 1 | |
| LTCT3833 | Gearshaft Holder (N1 Pinion G/S) | 1 | |
| M22520/2-01 | CRIMPING TOOL (BEECHCRAFT CORP) | 18 | |
| M22520/2-02 | PIN POSITIONER (BEECHCRAFT CORP) | 11 | |
| MIT65B08027 | Pin puller-AFT bogie inb'd and outb'd T/E flapg | 3 | |
| MIT65B81230 | SAFTYPIN | 5 | |
| MIT90-6716-2 | PULLER KIT-WING BOTTLE PIN BUSHING FWD. AND AFT | 1 | |
| MS20253P1-200 | NON-THREADED, STAINLESS STEEL, CHROMATE PIN, FOR AIRCRAFT. | 1 | |
| MTKC03662 | MOTOR PINION SHAFT | 1 | |
| PIN,HPT,AIR SEAL | PIN FOR HPT ROTOR FWD SHAFT AIR SEAL CLIP DIMPLE | 1 | |
| PWA88064 | PINS, LOCATING - AFT FAN COWL HINGES | 3 | |
| PWC42190 | Aligning pin Starter gen gearshaft | 1 | |
| PWC48522 | LAPPING TOOL BRETHER SHAFT | 2 | |
| PWC48527 | LAPPING KIT - PW308 SHAFTS | 3 | |
| PWC48632 | LAPPING KIT AGB SHAFT | 1 | |
| PWC72141 | FLUSH PIN GAUGE-STUB SHAFT | 1 | |
| R5724932820300 | BUSH-PINTLE LUG,AFT | 1 | |
| RA-RAFX-6 | FLEX SHAFT ADAPTER FOR RECHII SCANNER MALE CONNECTOR TO RECHII RA PROBE, (4PIN STEP LEMO RECEPTACLE FEMALE CONNECTOR) WITH SLIDING COLLAR, 6.0" LONG. Includes Test Report and Certificate of Conformance | 1 | |
| RB T102005 | Lower Planetary Transmission Pin Removing Pinion Shaft | 1 | |
| RB T102006 | Upper Planetary Transmission Pin Removing Pinion Shaft | 1 | |
| RBD25430-30201 | Holding Fixture Gear Shaft Bev/Pin Output Tail Rotor | 1 | |
| RBE13502-1-023 | Long Shaft Pin Replacement Tool | 2 | |
| RBE350A93-3323-00 | STATIONARY STAR/SPIN TABLE HAFTING | 2 | |
| RBW0000X00131A181A-3G | Aft Shipping Bracket | 2 | |
| RQ4-116 | SECURITY STRAP FOR INTAKE PLUG, attaches to ball-lock pins aft of intake lip. | 1 | |
| RRT075000-19 | AFT MOUNT PIN | 1 | |
| SLC-300-2 | TANK-PUMPING UNIT,AIRCRAFT LAVATORY SERVICING,VEHI | 1 | |
| SLN41180 | AFT PINTLE PIN NUT | 1 | |
| SPL-1859 | EQUIPMENT - REMOVAL/INSTALLATION, MLG AFT TRUNNION PIN | 1 | |
| SPL-1862 | AFT TRUNNION PIN, MLG, REMOVAL AND INSTALLATION EQUIPMENT | 1 | |
| SPL-6254 | LOCKOUT PIN ASSY - FWD & AFT LOCK LINK, TAIL SKID | 1 | |
| SWG-92 | 5/8-11 SPINDLE SHAFT | 1 | |
| SWG-93 | 3/8-24 SPINDLE SHAFT | 1 | |
| T-25756 | PULLER, PINION SHAFT BEARING | 1 | |
| T25756 | Puller, Pinion Shaft Bearing | 1 | |
| TEK-3005R-4.45M | Flexible Shaft Scanner Probe, 4.45mm Diameter Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R-4.7M | Flexible Shaft Scanner Probe, 4.7mm Diameter, Rechii Minimite (4-pin Lemo), A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005R-6.1M | Flexible Shaft Scanner Probe, 6.1mm Diameter, Rechii Minimite (4-pin Lemo), A320 PT6 53-31-50 PG623, 100KHz-2MHz | 1 | |
| TEK-3005R.156 | Eddy current, flexible shaft, bolt hole probe, .156 diameter, Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.156/4WL | Eddy current, flexible shaft, bolt hole probe, .156 diameter, 4" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.187 | Eddy current, flexible shaft, bolt hole probe, .187 diameter, Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.187/6WL | Eddy current, flexible shaft, bolt hole probe, .187 diameter, 6" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.240 | Flexible Shaft Scanner Probe, .240" Diameter, A320 PT6 53-31-50 PG623 Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.250/1WL | Flexible Shaft Scanner Probe, .250"Dia Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.250/6WL | Eddy current, flexible shaft, bolt hole probe, .250 diameter, 6" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.307 | Flexible shaft scanner probe .307 dia 7.8 A320 PT6 53-31-50 PG623 Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-3005R.375/6WL | Eddy current, flexible shaft, bolt hole probe, .375 diameter, 6" working length Rechii connector (4-pin Lemo), 100KHz-2MHz | 1 | |
| TEK-BT1000 | Low Frequency Surface Probe, Differential, Ø.250" tip, 1.5" SS long shaft with .5" long plastic tip 400Hz-2KHz, 2-Pin Microdot connector | 1 | |
| TM30425 | STUB SHAFT ASSEMBLY GUIDE PINS | 1 | |
| TOOL131 | McFarlane TOOL131 Cessna Aircraft Stabilizer Jack Screw Pin Removal Tool | 1 | |
| TR34R | BAC TR-34R Tow-Bar, 84 to 104 in L, Ring 2-1/4 in Telescoping, Powder-Coated, Orange, For Aircrafts | 4 | |
| 98A27603006000 | PIN-RIGGING,USED TO DRIVE OUT SHAFT ASSY | 5 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
