| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 114-452 | ADJUSTER | 2 | |
| 20-712 | ADJUSTER | 3 | |
| 834150-1 | ADJUSTER | 1 | |
| 834150-2 | ADJUSTER | 2 | |
| 8PE004363-10 | ADJUSTER | 11 | |
| 98D27504009000 | ADJUSTER | 22 | |
| 98D27504010000 | ADJUSTER | 21 | |
| 98L28004002202 | ADJUSTER | 1 | |
| 98L28004003202 | ADJUSTER | 1 | |
| A24007-3 | ADJUSTER | 1 | |
| A25017-1-M | ADJUSTER | 1 | |
| A25017-2 | ADJUSTER | 1 | |
| A35171 | ADJUSTER | 1 | |
| B71020-77 | ADJUSTER | 1 | |
| CJMDX34-004A | ADJUSTER | 4 | |
| D0003000000800 | ADJUSTER | 6 | |
| GU28875/1 | ADJUSTER | 1 | |
| M46196-100 | ADJUSTER | 8 | |
| M46214-2000 | ADJUSTER | 4 | |
| PWC60457 | ADJUSTER | 4 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 3403241-1 | ADJUSTER ASSY, OUTER WING SLING KIT (CALIBRATION) | 1 | |
| (CALIB) 35M5M01080001 | ADJUSUNI ADJUSTER UNIT - BRAKE PEDAL TRA (CALIBRATION) (CALIBRATION) | 1 | |
| 1104 | WEB ADJUSTER | 5 | |
| 114-1103 | BULLET TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | 1 | |
| 114-1104 | Piston Support Tool for Installation of Pistons into Adjuster Sleeves | 2 | |
| 114-1105 | GUIDE TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | 1 | |
| 114-1107 | Tool, Adjuster Assembly | 1 | |
| 114-1107TE | Tool, adjuster spring | 1 | |
| 114-1150 | "GUIDE" TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVE EXCLUDER RINGS | 1 | |
| 114-1285 | LOADING MANDREL TOOL FOR INSTALLATION OF BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-1318 | ADJUSTER HOUSING TOOL | 1 | |
| 114-1359 | GUIDE TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | 1 | |
| 114-1423-AZL | SPLIT RING TOOL FOR SIZING BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-1539 | “GUIDE” TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | 1 | |
| 114-1585 | ADJUSTER SLEEVE O-RING/ BACKUP RING INSTALLATION TOOL | 1 | |
| 114-1586 | SPLIT RING TOOL FOR RESIZING BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-1587 | TOOL FOR RESIZING BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-1607 | O-RING AND BACKUP RING INSTALLATION TOOL FOR ADJUSTER SLEEVE | 1 | |
| 114-1609 | TOOL THAT RESIZES BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-231 | TOOL FOR INST/REMOV. OF AN ADJUSTER | 2 | |
| 114-231TE | Tool, adjuster spring | 1 | |
| 114-245 | ADJUSTER PIN INSTALLATION TOOL | 3 | |
| 114-245TE | Tool, adjuster pin installation | 1 | |
| 114-291 | ADJUSTER ASSEMBLY / DISASSEMBLY TOOL | 2 | |
| 114-291TE | Tool, adjuster spring | 1 | |
| 114-295 | ADJUSTER PIN INSTALLATION TOOL | 1 | |
| 114-305 | Bullet Tool for Installation of Adjuster Pins into Pistons | 1 | |
| 114-328 | ADJUSTER PIN INSTALLATION TOOL | 1 | |
| 114-370 | BULLET TOOL FOR INSTALLATION OF ADJUSTER | 3 | |
| 114-371 | SUPPORT TOOL FOR INSTALLATION OF PISTONS INTO ADJUSTER SLEEVES | 1 | |
| 114-383 | SCREW ADJUSTER | 1 | |
| 114-417TE | Tool, adjuster spring | 1 | |
| 114-418 | "BULLET" TOOL FOR INSTALLATION OF ADJUSTER PINS INTO PITONS | 2 | |
| 114-434 | ADJUSTER SLEEVE O-RING INSTALLATION TOOL | 1 | |
| 114-434TE | Tool, adjuster pin installation | 1 | |
| 114-436 | SLEEVE GUIDE TOOL FOR INSTALLATION OF PISTONS INTO THE ADJUSTER SLEEVE | 1 | |
| 114-437 | TOOL THAT SIZES BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-438 | ADJUSTER SLEEVE O´RING | 1 | |
| 114-451 | "GUIDE" TOOL INSTALLATION OF PISTON INTIO ADJUSTER | 1 | |
| 114-452 | BULLET FOR INSTALLATION OF ADJUSTER PINS INTO PISTONS | 2 | |
| 114-452TE | Tool, adjuster pin installation | 1 | |
| 114-758 | ADJUSTER ASSEMBLY TOOL | 1 | |
| 114-761 | ADJUSTER DISASSEMBLY AND ASSEMBLY TOOL | 1 | |
| 114-780-1 | LOADING MANDREL TOOL FOR INSTALLATION OF BACKUP RINGS ON AN ADJUSTER SLEEVE | 1 | |
| 114-780-2 | PUSHER TOOL FOR INSTALLATION OF BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-780-3 | SPLIT RING TOOL THAT SIZES BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114-780-4 | TOOL THAT SIZES BACKUP RINGS ON ADJUSTER SLEEVES | 1 | |
| 114370 | BULLET TOOL FOR INSTALLATION OF ADJUSTER | 3 | |
| 12-01691 | SPARK PLUG GAP TESTER AND ADJUSTER. | 1 | |
| 160200-9Z000 | SPRING ADJUSTER | 12 | |
| 160200-9Z003 | SPRING ADJUSTER | 12 | |
| 1639LMT | RATE ARM ADJUSTER | 1 | |
| 2-10753 | ADJUSTER SWAGE INSTALLATION TOOL | 1 | |
| 20-694 | PIN, ADJUSTER | 2 | |
| 20-695 | PIN ADJUSTER | 1 | |
| 20-804 | PIN, ADJUSTER | 1 | |
| 2024684-1 | Multipurpose Rotor End Play Adjuster | 1 | |
| 2024684-1PM | MULTIPURPOSE ROTOR END PLAY ADJUSTER | 1 | |
| 2025318-1 | Multipurpose Rotor End Play Adjuster | 1 | |
| 2558899-1 | (ADJUSTER PIN INSTALLATION) | 1 | |
| 2558900-01 | ADJUSTER PIN INSTALLER | 1 | |
| 2558900-1 | ADJUSTER PIN INSTALLATION | 2 | |
| 266524 | MULTIPURPOSE ROTOR END PLAY ADJUSTER | 1 | |
| 280353 | WRENCH - FUEL CONTROL UNIT ADJUSTER | 4 | |
| 2558668 | ADJUSTER PIN, INSTALLATION TOOL | 1 | |
| 2558842 | ASSEMBLY SHIM USED TO PREVENT TOO MUCH ADJUSTER PULL THROUGH DURING LEAKAGE TEST. | 1 | |
| 2558901 | ADJUSTER ASSY-MAIN BASE | 1 | |
| 2558902 | ADJUSTER-ASSY | 1 | |
| 2558903 | ADJUSTER-ASSY | 1 | |
| 2558912 | ADJUSTER-ASSY,SPRING | 1 | |
| 2558913 | ADJUSTER-PILOT | 1 | |
| 2558916 | ADJUSTER-PILOT | 1 | |
| 2607241 | HOUSING ADJUSTER | 1 | |
| 2608192-1 | TUBE, ADJUSTER | 1 | |
| 266524-1-1 | ADJUSTER END PLAY ROTOR MULTIPUR POSE | 1 | |
| 280353PM | WRENCH - FUEL CONTROL UNIT ADJUSTER | 1 | |
| 3403241-1 | ADJUSTER ASSY, OUTER WING SLING, KIT | 1 | |
| 35M5M01080000 | ADJUSTER,UNIT-BRAKE PEDAL TRANSMITTER | 1 | |
| 35M5M01080001 | ADJUSTER UNIT - BRAKE PEDAL TRANSMITTER | 3 | |
| 4001270-1 | ADJUSTER PIN | 1 | |
| 4001426-1 | ADJUSTER PIN INSTALLATION BULLET TOOL | 1 | |
| 41969-11 | ADJUSTER FOR STRAP WIDE 1" | 1 | |
| 42-1804 | POT, CURRENT ADJUSTER | 1 | |
| 45-223-1 | TUBE ADJUSTER | 1 | |
| 45-2584 | TUBE ADJUSTER | 1 | |
| 45-313 60 | ADJUSTER TUBE | 1 | |
| 5011830 | TUBE ADJUSTER | 5 | |
| 460006505 | SLAVE ADJUSTER | 1 | |
| 533258905 | ADJUSTER TOOL | 1 | |
| 5965698-1 | BRAKE PEDAL ADJUSTER KIT | 1 | |
| 600-405-773 | MICROSWITCH ADJUSTER KEY | 1 | |
| 69008-0972 | Adjuster Wheel for Parallel Action Handtool | 1 | |
| 79001401-1 | PISTON OD PACKING SIZING TOOL (USED TO PROTECT PISTON ID PACKINGS DURING INSTALLATION OF ADJUSTER PIN (WILL PERFORM SAME FUNCTION AS PN 2558900-2)) | 1 | |
| 79001408- 1 | ADJUSTER PIN INSTALLATION BULLET | 1 | |
| 833070-1 | ADJUSTER,LINKAGE,IGV ADJ | 1 | |
| 833274-1 | WRENCH - ADJUSTER, FUEL CONTROL GOVERNOR - GTCP85-129H/J/K | 2 | |
| 833672-1 | BRAKE ADJUSTER ADAPTER | 1 | |
| 92700-10353-042 | DAMPER BEARING TQ ADJUSTER | 1 | |
| 956A7644P55 | ADJUSTER - RH ADAPTER[STL SAE 4140/40CR4MO3]/EN24 | 1 | |
| 97122001 | ADJUSTER WRENCH | 5 | |
| 98A27207585000 | RUDDER NEUTRAL ADJUSTER | 1 | |
| 98A27603002001 | ADJUSTER KINK SEAL | 1 | |
| 98D27104001150 | ADJUSTER ASSY | 1 | |
| 98D27309001000 | FWD KINK SEAL ADJUSTER | 26 | |
| 98D275040010000 | ADJUSTER-KINK SEAL | 1 | |
| 98D27504002000 | FLAP ADJUSTER NO.1 BUSH | 11 | |
| 98D27504009000 | ADJUSTER-KINK SEAL (UPPER FWD WY5396) | 22 | |
| 98D27504010 | ADJUSTER KINK SEAL | 1 | |
| 98D2750401000 | ADJUSTER FLAP-KINK SEAL UPPER AFT | 1 | |
| 98D27504010000 | ADJUSTER-KINK SEAL (UPPER AFT WY5658) | 21 | |
| 98D27504010100 | ADJUSTER KINK SEAL | 1 | |
| 98D27504010200 | ADJUSTER KINK SEAL | 1 | |
| 98D27504014120 | ADJUSTER ADJUSTER | 1 | |
| 98D27603002001 | ADJUSTER KINK SEAL | 30 | |
| 98L27004020138 | BRKT ASSY ADJUSTER | 1 | |
| 98L27004020142 | ADJUSTER ASSY | 1 | |
| 98L32104031106 | ADJUSTER BAR ASSY | 1 | |
| 98L52108529000 | TOOL SET ADJUSTER DOORS | 1 | |
| 994-0005 | CABLE ADJUSTER | 1 | |
| 99A76101500000 | ADJUSTER UNIT - BRAKE PEDAL TRANSMITTER | 3 | |
| A2130000-2 | ROTOR ENDPLAY ADJUSTER | 1 | |
| A25017-1 | B767 SUN VISOR ADJUSTER TOOL | 7 | |
| A25017-2 | SUNVISOR SLIDER ADJUSTER | 1 | |
| A35169 | ADJUSTER PIN | 1 | |
| A35393-11 | PIN, ADJUSTER | 1 | |
| A36913 | PIN, ADJUSTER | 1 | |
| AB27001-R1Q | ADJUSTER-KINK SEAL (UPPER AFT WY5658) | 1 | |
| AB27001-SQ3 | ADJUSTER-KINK SEAL UPPER AFT WY5658 | 1 | |
| AB27001-SR4 | ADJUSTER-KINK SEAL UPPER FWD WY5396 | 1 | |
| ATS415K | SPARK PLUG GAP TESTER AND ADJUSTER. | 2 | |
| BSA916 | 9/16 BENDIX SLACK ADJUSTER | 1 | |
| C10011-9 | Chain adjuster | 1 | |
| CAT5944-7 | LENGTH ADJUSTER OF LG REAR STRUT | 1 | |
| CHA723-350 | GEAR ADJUSTER | 1 | |
| CHA723-440 | GEAR ADJUSTER | 1 | |
| CS-1505 | Belt seat adjuster | 1 | |
| F26619000 | SUPPORT TOOL ( PISTON HOUSING AND ADJUSTER ASSEMBLY FOR WORK ON BRAKE PLACED ON WORKBENCH ) | 2 | |
| F26630200 | ADJUSTER TOOL | 8 | |
| F27866000-1 | Cone adjuster pin | 1 | |
| F70043-17 | SCREW ADJUSTER | 1 | |
| F72892 | WRENCH-CABLE ADJUSTER CARGO DOOR BALANCE | 1 | |
| F72892-1 | CABLE DOOR ADJUSTER | 1 | |
| F72892-2 | ADJUSTER BALANCE DOO | 1 | |
| FB98D0053 | ADJUSTER-KINK SEAL | 1 | |
| G5M5M0-108-0000 | ADJUSTER UNIT - BRAKE PEDAL TRANSMITTER | 2 | |
| GA31629 | ADJUSTER ASSEMBLY | 1 | |
| GU28875-1 | GRND IDLE ADJUSTER | 1 | |
| GU28875/1 | GRND IDLE ADJUSTER | 1 | |
| GU28876-1 | FLT IDLE ADJUSTER | 2 | |
| GU28876/1 | FLT IDLE ADJUSTER | 2 | |
| GU30073 | F100 ADJUSTER | 1 | |
| GU30622 | ADJUSTER SPANNER | 2 | |
| HSA716 | 7/16 HALDEX SLACK ADJUSTER | 1 | |
| HTE510005-029-T | ADJUSTER SPANNER | 1 | |
| HU41302-1 | ADJUSTER (VIGV AND VSV 2) | 3 | |
| HU41303-2 | ADJUSTER (VSV 1) | 3 | |
| IAE1J12511 | WRENCH-MOUNT TUBE ADJUSTER | 8 | |
| J32038-28 | Outboard Adjuster | 1 | |
| J32038-30 | INBD/OUTBD ADJUSTER | 1 | |
| J32038-58 | INBD/OUTBD ADJUSTER | 1 | |
| J32038-8 | BULLET NOSE ADJUSTER | 1 | |
| K24001-1 | Hoist Adapter Adjuster - VSFG and ASG | 10 | |
| K24001-5 | Adjuster assy | 1 | |
| K27002-6 | VERTICAL ADJUSTER ASSY | 1 | |
| MT-T-719-B | GOVERNOR ADJUSTER | 1 | |
| MT-T-720 | HI-RPM ADJUSTER TOOL | 1 | |
| PWC31571 | OIL PRESSURE RELIEF VALVE ADJUSTER | 4 | |
| Q-47965 | INSTALLING THE ADJUSTER PIN CONE | 9 | |
| Q46500 | INSTALLATION CONE (FOR THE ADJUSTER PIN) | 8 | |
| Q47334 | SPANNER (TO LOOSEN/TIGHTEN THE ADJUSTER ASSEMBLIES) | 10 | |
| Q47965 | INSTALLING THE ADJUSTER PIN CONE | 9 | |
| R46453 | TOOL USED TO INSTALL THE ADJUSTER PIN INTO THE PISTON. | 3 | |
| R46456 | Cone adjuster Pin | 2 | |
| R46457 | PIN, CONE ADJUSTER | 2 | |
| R47163 | Tool to install the adjuster pin into the piston | 1 | |
| R47164 | Installation of adjuster pin into piston | 3 | |
| R47228 | CONE TO INSTALL THE ADJUSTER PIN (1-330) | 1 | |
| RST3004ADJSLV | TOOK, STAKING, SLEEVE ADJUSTER | 1 | |
| S47035 | ADJUSTER INSTALLATION TOOL | 2 | |
| SGDE33ESD | SCREWDRIVER, ELECTRONIC, POTENTIOMETER ADJUSTER | 1 | |
| SR19W-A | CONE TO INSTALL THE ADJUSTER PIN (1-330) | 5 | |
| SSDE33C | SCREWDRIVER, ELECTRONIC, POTENTIOMETER ADJUSTER | 1 | |
| STD-126 | ADJUSTER PINS INSTALLATION TOOLS | 1 | |
| T-451524 | ADJUSTER AND TORQUE TOOL,COMPENSATOR | 1 | |
| T20101460-NA-1 | NULL ADJUSTER WRENCH | 1 | |
| T250403-AA-1 | POLE ADJUSTER | 1 | |
| T48836 | SPANNER (TO LOOSEN/TIGHTEN THE ADJUSTER ASSEMBLIES) | 1 | |
| T49266 | INSTALLATION CONE FOR ADJUSTER PIN | 1 | |
| T720077 | ADJUSTER TOOL | 1 | |
| T9-2299K | TENSION ADJUSTER-CLIP BOARD, CONTROL WHEEL | 1 | |
| TM7662G001 | TENSION ADJUSTER | 1 | |
| TRAX-776401 | SLEEVE, ADJUSTER | 1 | |
| TS250403AA1 | POLE PIECE ADJUSTER | 1 | |
| UT739 | AFR ADJUSTER TOOL | 2 | |
| V25SH0103 | FIXTURE ADJUSTER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
