| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| JHWAP-4A | ADJ WRENCH, | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 08-00178-01 | WRENCH, TORQUE, TORQUE ADJUSTABLE, MATL CHROME-VANADIUM STEEL, DRIVE RATCHET, SIZE-DRV 3/8 IN SQUARE, TORQ 5 - 50 NM, LG 400 MM | 1 | |
| 10005MFRMH | TORQUE WRENCH,MICROMTER ADJ,1" DR,200-1000 IN LB | 2 | |
| 1025-921-1 | SPANNER WRENCH, DOOR SNUBBER ADJUSTMENT | 1 | |
| 109-3101-85 101 | WRENCH,SOCKET (DROOP STOP ADJUSTMENT) | 1 | |
| 117B | ADJ. PIN SPANNER WRENCH, L 9-3/4 IN. | 4 | |
| 125-120 | WRENCH, ADJUSTABLE SPANNER | 1 | |
| 125-30 | WRENCH, ADJUSTABLE SPANNER | 1 | |
| 125-35 | WRENCH, ADJUSTABLE SPANNER | 1 | |
| 125-50 | WRENCH, ADJUSTABLE SPANNER | 1 | |
| 125-80 | WRENCH, ADJUSTABLE SPANNER | 1 | |
| 1503MFRMH | TORQUE WRENCH,MICROMTER ADJ,1/2 DR,20-150 FT LB | 3 | |
| 2002MRMH | TORQUE WRENCH,MICROMTER ADJ,3/8 DR,30-200 IN LB | 3 | |
| 2557814 | WRENCH, TELESCOPING HEAD SENSOR ADJ | 1 | |
| 269T9302 | Wrench, Upper Pulley Adjustment | 2 | |
| 269T9303-003 | Wrench, Upper Pulley Adjustment | 2 | |
| 2713629000-12 | WRENCH, ADJUSTING | 1 | |
| 304AHSK | SET,WRENCH,SPANNER,ADJUSTABLE HOOK | 2 | |
| 32402760-1 | WRENCH, ADJUSTABLE SPANNER | 1 | |
| 3402760-1 | WRENCH, ADJUSTABLE SPANNER | 1 | |
| 3G6705G04651 | WRENCH, PEDAL HANDWHEEL ADJUSTING | 1 | |
| 5120-00-240-5328 | 8” CRESCENT (WRENCH, ADJUSTABLE) | 1 | |
| 5163A43 | WRENCH, SPANNER: ADJUSTABLE,1-1/8 IN,8 IN LG, CR PLTD | 1 | |
| 810525 | 100-700 LB-FT TORQUE WRENCH, MICROMETER ADJUSTABLE 3/4'' SQUARE DRIVE | 1 | |
| 6798292 | WRENCH, GROUND IDLE ADJUSTING | 3 | |
| 6F6330G00131 | SPL WRENCH, MGB RODS ADJSUTMENT | 1 | |
| 7430A33 | 8” CRESCENT (WRENCH, ADJUSTABLE) | 1 | |
| 800-A-669 | WRENCH, RECLINE TRAVEL ADJUSTMENT NUTS (1 1/4") | 1 | |
| 85555A413 | TORQUE WRENCH, ADJUSTABLE CLICK-STYLE W/ SOCKET RELEASE, 3/8" SQUARE DRIVE, 50-250 IN-LB | 1 | |
| 85555A517 | WRENCH, TORQUE ADJ 1/2"SQ-DR 100-600LB/IN | 1 | |
| 98D27504119000 | WRENCH,SPANNER;|SPANNER FLAP ADJUSTMENT; | 18 | |
| A27101-5 | WRENCH,ADJUSTMENT | 8 | |
| AD10A | WRENCH, ADJUSTABLE, | 1 | |
| AD10B | WRENCH, ADJUSTABLE, SNAP-ON® , 10" | 1 | |
| AD12A | WRENCH, ADJUSTABLE, | 1 | |
| AD12B | WRENCH, ADJUSTABLE, SNAP-ON® , 12" | 1 | |
| AD6A | WRENCH, ADJUSTABLE, | 1 | |
| AD6B | WRENCH, ADJUSTABLE, SNAP-ON® , 6" | 1 | |
| AD704A | SET, WRENCH, ADJUSTA | 1 | |
| AD704B | SET, WRENCH, ADJUSTA | 1 | |
| AD8A | WRENCH, ADJUSTABLE, SNAP-ON® , 8" | 1 | |
| AD8B | WRENCH, ADJUSTABLE, SNAP-ON® , 8" | 1 | |
| AD8C | WRENCH, ADJUSTABLE, 8"" | 1 | |
| ADCF8 | WRENCH, CROWFOOT, ADJUSTABLE, 3/8" DRIVE | 2 | |
| AHS301B | WRENCH, SPANNER, ADJ | 6 | |
| AHS307B | WRENCH, SPANNER, ADJ | 2 | |
| AMF771MD-45-90 | WRENCH, ADJUSTABLE HOOK | 2 | |
| BRUTUS3R250D | TORQUE WRENCH, ADJ. | 6 | |
| CL50NX15D | TORQUE WRENCH INTERCHANGEABLE HEAD TYPE ADJUSTABLE TORQUE WRENCH, 10-50, 0.5N.M, 15D | 1 | |
| EMB-00976-001 | WRENCH, DIR. VIS. WINDOW ADJUSTMENT | 9 | |
| EMB-00977-001 | WRENCH, DIR. VIS. WINDOW ADJUSTMENT | 5 | |
| FA-117.B | ADJ. PIN SPANNER WRENCH, L 9-3/4 IN. | 1 | |
| FAD704 | 6” CRESCENT (WRENCH, ADJUSTABLE) | 1 | |
| FADH10A | WRENCH, ADJUSTABLE, | 1 | |
| FADH10B | WRENCH, ADJUSTABLE, | 1 | |
| FADH12A | WRENCH, ADJUSTABLE, | 1 | |
| FADH12B | WRENCH, ADJUSTABLE, | 1 | |
| FADH6A | WRENCH, ADJUSTABLE, CUSHION GRIP, 6" | 1 | |
| FADH6C | WRENCH, ADJUSTABLE, CUSHION GRIP, 6" | 1 | |
| FADH704 | Set, Wrench, Adjustable, FLANK DRIVE Plus, Cushion Grip, 4 pcs. | 1 | |
| FADH704A | SET, WRENCH, ADJUSTA | 1 | |
| FADH8A | WRENCH, ADJUSTABLE, | 1 | |
| GAJ10A | WRENCH, ADJUSTABLE 10" | 1 | |
| GAJ12A | WRENCH, ADJUSTABLE 12" | 1 | |
| GAJ18A | WRENCH, ADJUSTABLE, 18 | 3 | |
| GAJ4A | WRENCH, ADJUSTABLE, 4 | 2 | |
| GAJ6A | WRENCH, ADJUSTABLE, | 3 | |
| GAJ8A | WRENCH, ADJUSTABLE, | 2 | |
| GAJS30 | WRENCH, ADJUSTABLE, SIDE WHEEL, INDUSTRIAL FINISH, 30" | 2 | |
| GQT2R200NP | TORQUE WRENCH,ADJ CLICK,40-300IN.LB | 3 | |
| GQT3R250NP | TORQUE WRENCH, ADJ. CLICK TYPE, U.S., FIXED RATCHET, 50-250 FT-LB, 1/2" DRIVE | 1 | |
| GS15674-1 | WRENCH, BELLOW ADJUSTING | 1 | |
| GS19711-1 | WRENCH, SCREW ADJUSTMENT | 1 | |
| GS19902-1 | WRENCH, ADJUSTMENT | 1 | |
| GS20260-1 | WRENCH, PC STOP ADJUST | 1 | |
| GSE 079 | ADJUSTABLEWRENCH,HOOKSPANNERGSE079 | 1 | |
| HSP1260 | WRENCH, STOP LEVER ADJUSTING | 1 | |
| J53004-1 | Set- Wrench, Radome Latch Torque Adjustment | 10 | |
| K53005-1 | Set - Wrench, Radome Latch Torque Adjustment | 5 | |
| KEN5010620K | WRENCH,ADJUSTABLE;|ADJUSTABLE WRENCH SET OF 2PC- 6"&10"; | 1 | |
| MS15461-3 | 8” CRESCENT (WRENCH, ADJUSTABLE) | 1 | |
| MT927-005 | WRENCH, ELEC SPHERE BEARING ADJUST | 1 | |
| NOR-11037 | WRENCH, TORQUE;1-4 RATCHET -ADJUSTABLE 1-20 | 1 | |
| PWC31871 | ADJUSTING WRENCH, OIL PRESSURE RELIEF VALVE | 1 | |
| QC1R200 | Torque Wrench, Adj. Click Type, U.S., Compact-Ratchet, 40-200 in. lb., 3/8" drive | 1 | |
| QC2R1000 | Torque Wrench, Adj. Click Type, U.S., Fixed-Ratchet, 200-1000 in. lb., 3/8" drive | 1 | |
| QD1200 | TORQUE WRENCH, ADJ. | 7 | |
| QD150 | TORQUE WRENCH, ADJ. | 6 | |
| QD1R200 | TORQUE WRENCH, ADJ. | 18 | |
| QD1R200A | TORQUE WRENCH, ADJ. CLICK TYPE, U.S. | 2 | |
| QD1R200 | TORQUE WRENCH, ADJ. CLICK TYPE, U.S | 18 | |
| QD1R50 | Torque Wrench, Adj. Click-type, U.S., Fixed-Ratchet, 10-50 in. lb., 1/4" drive | 11 | |
| QD1RN6B | TORQUE WRENCH, ADJ. CLICK TYPE, NEWTON METER, FIXED-RATCHET, 12-60 DN•M, 1/4" DRIVE | 1 | |
| QD21000 | TORQUE WRENCH, ADJ. | 2 | |
| QD21000A | Torque Wrench, Adj. Click-type, US, Fixed, 200–1,000 in-lb, 3/8" drive | 3 | |
| QD2FR75 | TORQUE WRENCH, ADJ. | 8 | |
| QD2R100 | TORQUE WRENCH, ADJ. | 7 | |
| QD2R1000 | TORQUE WRENCH, ADJ. CLICK TYPE,FIX | 16 | |
| QD2R1000A | TORQUE WRENCH, ADJ. CLICK TYPE, U.S., FIXED-RATCHET, 200-1000 IN. LB., 3/8" DRIVE | 7 | |
| QD2R100A | TORQUE WRENCH, ADJ. CLICK,20-100 FT/LB | 4 | |
| QD2R200 | TORQUE WRENCH, ADJ. CLICK TY | 16 | |
| QD2RN50 | TORQUE WRENCH, ADJ. | 3 | |
| QD2RN50A | TORQUE WRENCH, ADJ. | 1 | |
| QD3150 | TORQUE WRENCH, ADJ. | 1 | |
| QD3250 | TORQUE WRENCH, ADJ. | 3 | |
| QD32500 | TORQUE WRENCH, ADJ. | 4 | |
| QD3R150 | TORQUE WRENCH, ADJ. | 7 | |
| QD3R1600 | TORQUE WRENCH, ADJ. | 4 | |
| QD3R250 | TORQUE WRENCH, ADJ. | 9 | |
| QD3R2500 | TORQUE WRENCH, ADJ. | 8 | |
| QD3R250A | TORQUE WRENCH, ADJ. CLICK TYPE, USA, | 8 | |
| QD3RN350 | TORQUE WRENCH, ADJ. | 3 | |
| QD4400 | TORQUE WRENCH, ADJ. | 3 | |
| QD4R400 | TORQUE WRENCH, ADJ. | 5 | |
| QD4R600 | TORQUE WRENCH, ADJ. | 9 | |
| QD4RN800 | TORQUE WRENCH, ADJ. | 5 | |
| QD5R1000 | TORQUE WRENCH, ADJ. | 8 | |
| QJR3209C | Torque Wrench, Adj. Click Type, U.S., Fixed-Ratchet, 500-2500 in. lb., 1/2" drive | 1 | |
| TE602FUAC | SNAP-ON TORQUE WRENCH, ADJ, CLIKC TYPE, FIXED-RATCHET, 0-600 FT/LBS., 1/2" DRIVE | 2 | |
| W-271 | WRENCH, ADJUSTABLE C-SPANNER | 2 | |
| WRENCH, ADJUSTABLE, FLANK DRIVE® PLUS, CUSHION GRIP, 6" | WRENCH, ADJUSTABLE, FLANK DRIVE® PLUS, CUSHION GRIP, 6" | 1 | |
| FAD704 | 6” CRESCENT (WRENCH, ADJUSTABLE) | 1 | |
| MS15461-3 | 8” CRESCENT (WRENCH, ADJUSTABLE) | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
