| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 402459605 | ADAPTOR TOOL | 1 | |
| 460007070 | ADAPTOR TOOL | 7 | |
| 856A1336P05 | ADAPTOR TOOL | 3 | |
| 873010F32078 | ADAPTOR TOOL | 1 | |
| 97A28002549000 | ADAPTOR TOOL | 5 | |
| 98A27407514101 | ADAPTOR TOOL | 1 | |
| CHT7565B-1 | ADAPTOR TOOL | 1 | |
| CM264-10 | ADAPTOR TOOL | 2 | |
| CM837-28A | ADAPTOR TOOL | 2 | |
| M46292 | ADAPTOR TOOL | 28 | |
| T-CM5015-10 | ADAPTOR TOOL | 1 | |
| T48553-1 | ADAPTOR TOOL | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) CG9291101-0005 | CHECK VALVE LEAK CHECK ADAPTOR TOOL (CALIBRATION) (CALIBRATION) | 1 | |
| 09P1181B | INSTALLATION TOOL ADAPTOR (2IT) | 1 | |
| 0XYADAPT0R | OXY ADAPTOR TOOL | 1 | |
| 1/2-HEX-TO-1/2-SQDR | DRIVE ADAPTOR TOOL | 1 | |
| 1/2-OFFSET-ADAPT | 1/2" OFFSET ADAPTOR TOOL | 1 | |
| 109-3400-38-1 | AGUSTA TOOL - ADAPTORS, FREEWHEEL SPRAG CLUTCH INSTL ASSY | 1 | |
| 109-3400-38-3 | AGUSTA TOOL - ADAPTORS, FREEWHEEL SPRAG CLUTCH INSTL - BUSHING, SLEEVE | 1 | |
| 109-3400-38-5 | AGUSTA TOOL - ADAPTORS, FREEWHEEL SPRAG CLUTCH INSTL - BODY | 1 | |
| 109-3400-38-7 | AGUSTA TOOL - ADAPTORS, FREEWHEEL SPRAG CLUTCH INSTL - PULLER | 1 | |
| 110059-501 | ADAPTOR FUEL TOOL | 3 | |
| 12445-048-001 | TRANSDUCER ADAPTOR TOOL | 6 | |
| 129503 | LGP INSTALLATION TOOL ADAPTOR | 1 | |
| 1014758 | WASH UNIT THIS TOOL IS USED TO SUPPLIES AND CONTROLS THE WATER TO THE WASH ADAPTOR. | 1 | |
| 1016321 | TORQUE WRENCH CYCLEAN ADAPTOR THIS TOOL IS USED TO APPLY TORQUE TO THE CYCLEAN ADAPTOR. | 1 | |
| 14PF465-TOOL | ADAPTOR, DRIVE TOOL | 8 | |
| 14PF465TOOL | ADAPTOR, DRIVE TOOL | 8 | |
| 14PF465TOOLM | ADAPTOR, DRIVE TOOL | 5 | |
| 173784 | TOOL OXYGEN ADAPTOR | 19 | |
| 1900856 | CRIMP TOOL ADAPTOR | 1 | |
| 240-MAINS-ADAPTOR | 240 VOLT ADAPTOR TOOL | 1 | |
| 2C14226G01 | TOOL - PEDERSTAL ADAPTOR (CF6 AFT) | 1 | |
| 2C6359G04 | TOOL - PEDESTAL ADAPTOR (80A2 FWD) | 1 | |
| 2C6360G01 | TOOL - ADAPTOR PEDESTAL COMP STATOR | 2 | |
| 2MIT2A264-0812-1 | ADAPTOR PLATE R&I TOOL, POTABLE WATER TANK | 5 | |
| 33410AB-125-4 | PITOT ADAPTOR TOOL | 4 | |
| 33410LH-125-4 | STATIC ADAPTOR TOOL | 21 | |
| 33410LH-90-4 | STATIC ADAPTOR TOOL | 1 | |
| 33410MC-125-4 | PITOT ADAPTOR TOOL | 2 | |
| 36122 | PITOT PROBE CHARGING ADAPTOR TOOL | 18 | |
| 365A94318101 | TOOLING, REFERENCE, ADAPTOR, FREQUENCY | 1 | |
| 40541709ST | OUTLET LEAK TEST ADAPTOR TOOL (U) | 1 | |
| 460005812 | TORQUE ADAPTOR TOOL | 25 | |
| 460006404 | TORQUE ADAPTOR TOOL | 17 | |
| 460006804 | BLEED ADAPTOR TOOL | 27 | |
| 460007156 | CHARGING ADAPTOR TOOL | 12 | |
| 460007230 | MLG AXLE NUT ADAPTOR TOOL | 28 | |
| 460007242 | MLG TORQUE LINK ADAPTOR TOOL | 20 | |
| 460007422-1 | A320 STEERING ADAPTOR L/H TOOL | 1 | |
| 460007422-2 | A320 STEERING ADAPTOR R/H TOOL | 1 | |
| 460007423-1 | A320 STEERING ADAPTOR L/H TOOL | 1 | |
| 460007423-2 | A320 STEERING ADAPTOR R/H TOOL | 1 | |
| 489-49 | HOLDING WRENCH ADAPTOR (TOOL KIT) | 1 | |
| 5502026A00 | COAXIAL ADAPTOR TOOL | 1 | |
| 5502026A000 | COAXIAL ADAPTOR TOOL | 1 | |
| 575108-200 | TOOL-ADAPTOR TEST | 1 | |
| 66464-2C14795P03 | TOOL-REAR BEAM ADAPTOR | 1 | |
| 670BA57012K92A | TOOL KIT, WING TO FUSE BUSHING ADAPTOR | 1 | |
| 856A1336G02 | TOOL KIT - ADAPTOR TORQUE | 20 | |
| 856A1836G01 | TOOL: ADAPTOR,MAINT STAND | 10 | |
| 856A2304G01 | Adaptor Toolset | 1 | |
| 856A2304G02 | ADAPTOR TOOLSET | 2 | |
| 856A2659G01 | TOOL: ADAPTOR FILTER-DRY | 5 | |
| 856A2797G01 | TOOL: ADAPTOR LEAD TEST | 7 | |
| 856A3524G01 | TOOL SET DRIVE ADAPTOR | 14 | |
| 856A3601 | ADAPTOR DRAIN LUB UNIT TOOL | 1 | |
| 856A4095G02 | ADAPTOR KIT TOOL SET | 1 | |
| 980.1101 | KS TOOLS 980.1101 - 90° LUBRICANT ADAPTOR | 1 | |
| 980.1107 | KS TOOLS 360° ADAPTOR, ADJUSTABLE | 1 | |
| 8819795000 | TOOL ADAPTOR FITTING | 3 | |
| 98A07003907200 | LOAD CELL ADAPTOR TOOL | 15 | |
| 98A07003910200 | JACK ADAPTOR TOOL | 5 | |
| 98A07003911200 | JACK ADAPTOR TOOL | 12 | |
| 98A27407514101 | ADAPTOR, TOOL | 1 | |
| 98A27804001000 | TORQUE ADAPTOR TOOL | 5 | |
| 98A27808003001 | SLAT ADAPTOR TOOL | 15 | |
| 98A54403024000 | ADAPTOR PLATE TOOL | 8 | |
| 98A57104004000 | TORQUE WRENCH ADAPTOR TOOL | 5 | |
| 98D07104000100 | MLG JACK ADAPTOR TOOL | 5 | |
| 98D07104000101 | MLG JACK ADAPTOR TOOL | 3 | |
| 98D27804001000 | FLAP/SLAT DRIVE ADAPTOR TOOL | 29 | |
| 98D34003500000 | STATIC ADAPTOR (4 OFF ABCD)KIT TOOL | 31 | |
| 98D34003500000-100 | STATIC ADAPTOR TOOL | 1 | |
| 98D34003500000-102 | STATIC ADAPTOR TOOL | 2 | |
| 98D34003500000-103 | STATIC ADAPTOR TOOL | 3 | |
| 98D34003500100 | STATIC ADAPTOR TOOL | 9 | |
| 98D34103002102 | FLUSHING TOOL SET ADAPTOR | 12 | |
| 98D57004098044 | TOOL - CRADLE + ADAPTORS + LOAD CELL | 3 | |
| 98D71203002208 | TOOL - ADAPTOR | 7 | |
| 98F07103500001 | NOSE JACKING ADAPTOR TOOL | 20 | |
| 98F07104000001-042 | LH WING JACK ADAPTOR TOOL | 1 | |
| 98F07104000001-043 | RH WING JACK ADAPTOR TOOL | 1 | |
| 98F07107501000 | AFT JACKING ADAPTOR TOOL | 17 | |
| 98F24208240000 | TORQUE ADAPTOR TOOL | 1 | |
| 98F34103000000 | ADAPTOR PROBE STATIC TOOLING | 16 | |
| 98F34103001000 | ADAPTOR PITOT PROBE[SET OF 3 ADAPTORS]**EQUIV TOOL | 16 | |
| 98F49208240000 | ADAPTOR APU GEN TOOL | 10 | |
| 98F49208240001 | ADAPTOR APU GEN TOOL | 12 | |
| 98F54003007001 | TOOL ADAPTOR-DYNAMOMETRIC AT RIB8(FRE-217) | 3 | |
| 98F54003008002 | TOOL: ADAPTOR-DYNAMO | 2 | |
| 98S71005001200 | ADAPTOR,WRENCH ALTERNATOR SPECIAL TOOL FOR R&R ATR ENGINE. | 8 | |
| 98V28004003000 | RECOVERY TOOL - ADAPTOR FUEL PUMP | 2 | |
| 99A34103004000 | STATIC ADAPTOR TOOL | 10 | |
| A12005-1 | B767 LUB ADAPTOR TOOL | 11 | |
| A28005-48 | ADAPTOR TOOL. APU FUEL SHROUD LINE | 22 | |
| A300 OXYGEN ADAPTOR | OXYGEN ADAPTOR TOOL | 1 | |
| A300B4FLAPDRIVE-ADAP | A300 B4 FLAP DRIVE ADAPTOR TOOL | 1 | |
| A3044 | SNAP ON TOOL 3/8IN X 1/4IN HEXX 4IN ADAPTOR | 6 | |
| A320-MLG | A320 MLG CHARGING ADAPTOR TOOL | 1 | |
| A32045-85 | STEERING NUT ADAPTOR WRENCH TOOL | 9 | |
| A320FLAPDRIVE-ADAP | A320 FLAP DRIVE ADAPTOR TOOL | 1 | |
| A71049-1 | PROBE ADAPTOR TOOL | 13 | |
| ADAPTOR-CFM56 | CFM56&V2500 ADAPTOR TOOL | 1 | |
| AO113718 | ADAPTOR ASSY TOOL | 2 | |
| APV7873-01-0 | ADAPTOR -TORQUE TOOL | 2 | |
| AST34A001 | PITOT STATIC ADAPTOR TOOL | 2 | |
| B28009-1 | ADAPTOR SHAFT ALIGMENT TOOL | 18 | |
| B32035-6 | Adaptor - Installation Tool | 1 | |
| BT-VS-500 | Adaptor Tool Vise (without Jaw Inserts) | 2 | |
| BT-VS-511 | Adaptor Tool Vise with 24 Piece Jaw Set | 2 | |
| C07002-2 | JACK ADAPTOR, WING TOOL | 10 | |
| C21943-0-1 | POSITIONING ADAPTOR TOOL | 3 | |
| C47511 | MLG TORQUE LINK ADAPTOR TOOL | 7 | |
| C622G4001101 | TOOLING REFERENCE FOR ADAPTOR | 1 | |
| CABIN_ALT.SW-ADAPTOR | ALT SWITCH & ADAPTOR PLATE TOOL | 1 | |
| CARGOFIRE | CARGO FIRE BOTTLE TEST ADAPTOR TOOL | 1 | |
| CB609A3 | STUD ADAPTOR TOOL | 1 | |
| CB609B3 | STANDOFF ADAPTOR TOOL | 1 | |
| CG9291101-0005 | CHECK VALVE LEAK CHECK ADAPTOR TOOL | 1 | |
| CM-S-229 | Adaptor Tool Set - Aluminum | 1 | |
| CM-S-229L | Adaptor Tool Set - Aluminum | 1 | |
| CM-S-264 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool Set - Aluminum | 3 | |
| CM-S-264R | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-288 | MIL-DTL-28840 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-288R | MIL-DTL-28840 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-389B | MIL-DTL-38999 Series 4 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-389BR | MIL-DTL-38999 Series 4 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-389L | MIL-DTL-38999 Series 1 Adaptor Tool Set - Aluminum | 3 | |
| CM-S-389LR | MIL-DTL-38999 Series 1 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-389S | MIL-DTL-38999 Series 2 Adaptor Tool Set - Aluminum | 3 | |
| CM-S-389SAB | MIL-DTL-38999 Series 2 Adaptor Tool Set (11-8818) | 2 | |
| CM-S-389T | MIL-DTL-38999 Series 3 Adaptor Tool Set - Aluminum | 4 | |
| CM-S-389TR | MIL-DTL-38999 Series 3 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015 | AS50151 and MIL-DTL-83723 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015-SS | AS50151 and MIL-DTL-83723 Series 2 Adaptor Tool Set - Steel | 2 | |
| CM-S-5015M | AS50151 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015R | Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015RM | AS50151 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015RS | AS50151 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-5015S | AS50151 Adaptor Tool Set - Aluminum | 3 | |
| CM-S-60 | ADAPTOR TOOL SET (ALUM.) | 1 | |
| CM-S-602 | Pattern 602 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-801 | 2M801 and 801 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-801 PLUG ADAPTORS | MICRO CONNECTORS 2M801 and 801 Adaptor Tool Set | 1 | |
| CM-S-801R | MICRO CONNECTORS 2M801 and 801 Adaptor Tool Set | 2 | |
| CM-S-801R RECEPTACLE ADAPTORS | MICRO CONNECTORS 2M801 and 801 Adaptor Tool Set | 1 | |
| CM-S-805 | 2M805 and 805 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-805 PLUG ADAPTORS | MICRO CONNECTORS 2M805 and 805 Adaptor Tool Set | 1 | |
| CM-S-805R | 2M805 and 805R Adaptor Tool Set - Aluminum | 2 | |
| CM-S-805R RECEPTACLE ADAPTORS | MICRO CONNECTORS 2M805 and 805 Adaptor Tool Set | 1 | |
| CM-S-815L | MIL-C-81511 Series 1 and 3 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-815R | MIL-C-81511 Series 1, 2, 3, and 4 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-815S | MIL-C-81511 Series 2 and 4 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-837 | Adaptor Tool Set | 3 | |
| CM-S-837RB | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool Set - Aluminum | 2 | |
| CM-S-837SS | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool Set - Steel | 2 | |
| CM-S-SJT | Adaptor Tool Set - Aluminum | 1 | |
| CM229-12 | Adaptor Tool - Aluminum | 2 | |
| CM229-14 | Adaptor Tool - Aluminum | 2 | |
| CM229-16 | Adaptor Tool - Aluminum | 2 | |
| CM229-18 | Adaptor Tool - Aluminum | 2 | |
| CM229-20 | Adaptor Tool - Aluminum | 2 | |
| CM229-22 | Adaptor Tool - Aluminum | 2 | |
| CM229-24 | Adaptor Tool - Aluminum | 2 | |
| CM229-36 | Adaptor Tool - Aluminum | 2 | |
| CM229-40 | Adaptor Tool - Aluminum | 2 | |
| CM229L-28 | Adaptor Tool - Aluminum | 2 | |
| CM229L-32 | Adaptor Tool - Aluminum | 2 | |
| CM229L-44 | Adaptor Tool - Aluminum | 2 | |
| CM229L-48 | Adaptor Tool - Aluminum | 2 | |
| CM229L-52 | Adaptor Tool - Aluminum | 2 | |
| CM264-10 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool for Plug Size 10 | 2 | |
| CM264-12 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool for Plug Size 12 | 2 | |
| CM264-14 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool for Plug Size 14 | 2 | |
| CM264-14S | Adaptor Tool - Steel | 2 | |
| CM264-16 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool for Plug Size 16 | 2 | |
| CM264-18 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool for Plug Size 18 | 2 | |
| CM264-20 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool for Plug Size 20 | 2 | |
| CM264-22 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool for Plug Size 22 | 2 | |
| CM264-24 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool for Plug Size 24 | 2 | |
| CM264-8 | MIL-DTL-26482 and MIL-DTL-83723 Adaptor Tool for Plug Size 8 | 2 | |
| CM264R-10 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 10 | 2 | |
| CM264R-12 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 12 | 2 | |
| CM264R-14 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 14 | 2 | |
| CM264R-16 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 16 | 2 | |
| CM264R-18 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 18 | 2 | |
| CM264R-20 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 20 | 2 | |
| CM264R-22 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 22 | 2 | |
| CM264R-24 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 24 | 2 | |
| CM264R-8 | MIL-DTL-26482, MIL-DTL-38999, MIL-DTL-83723, Pattern 602 and 615 Adaptor Tool for Receptacle Size 8 | 2 | |
| CM288-11A | MIL-DTL-28840 Adaptor Tool for Plug Size 11(A) | 2 | |
| CM288-11B | MIL-DTL-28840 Adaptor Tool for Plug Size 11(A) | 2 | |
| CM288-13A | MIL-DTL-28840 Adaptor Tool for Plug Size 13(B) | 2 | |
| CM288-13B | MIL-DTL-28840 Adaptor Tool for Plug Size 13(B) | 2 | |
| CM288-15A | MIL-DTL-28840 Adaptor Tool for Plug Size 15(C) | 2 | |
| CM288-15B | MIL-DTL-28840 Adaptor Tool for Plug Size 15(C) | 2 | |
| CM288-17A | MIL-DTL-28840 Adaptor Tool for Plug Size 17(D) | 2 | |
| CM288-17B | MIL-DTL-28840 Adaptor Tool for Plug Size 17(D) | 2 | |
| CM288-19A | MIL-DTL-28840 Adaptor Tool for Plug Size 19(E) | 2 | |
| CM288-19B | MIL-DTL-28840 Adaptor Tool for Plug Size 19(E) | 2 | |
| CM288-23A | MIL-DTL-28840 Adaptor Tool for Plug Size 23(F) | 2 | |
| CM288-23B | MIL-DTL-28840 Adaptor Tool for Plug Size 23(F) | 2 | |
| CM288-25A | MIL-DTL-28840 Adaptor Tool for Plug Size 25(G) | 2 | |
| CM288-25B | MIL-DTL-28840 Adaptor Tool for Plug Size 25(G) | 2 | |
| CM288-29A | MIL-DTL-28840 Adaptor Tool for Plug Size 29(H) | 2 | |
| CM288-29B | MIL-DTL-28840 Adaptor Tool for Plug Size 29(H) | 2 | |
| CM288-33A | MIL-DTL-28840 Adaptor Tool for Plug Size 33(J) | 2 | |
| CM288-33B | MIL-DTL-28840 Adaptor Tool for Plug Size 33(J) | 2 | |
| CM288R-11A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 11(A) | 2 | |
| CM288R-11B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 11(A) | 2 | |
| CM288R-13A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 13(B) | 2 | |
| CM288R-13B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 13(B) | 2 | |
| CM288R-15A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 15(C) | 2 | |
| CM288R-15B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 15(B) | 2 | |
| CM288R-17A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 17(D) | 2 | |
| CM288R-17B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 17(D) | 2 | |
| CM288R-19A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 19(E) | 2 | |
| CM288R-19B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 19(E) | 2 | |
| CM288R-23A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 23(F) | 2 | |
| CM288R-23B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 23(F) | 2 | |
| CM288R-25A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 25(G) | 2 | |
| CM288R-25B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 25(G) | 2 | |
| CM288R-29A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 29(H) | 2 | |
| CM288R-29B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 29(H) | 2 | |
| CM288R-33A | MIL-DTL-28840 Adaptor Tool for Receptacle Size 33(J) | 2 | |
| CM288R-33B | MIL-DTL-28840 Adaptor Tool for Receptacle Size 33(J) | 2 | |
| CM389B-11 | MIL-DTL-38999 Series 4 Adaptor Tool for Plug Size 11(B) | 2 | |
| CM389B-13 | MIL-DTL-38999 Series 4 Adaptor Tool for Plug Size 13(C) | 2 | |
| CM389B-13S | Adaptor Tool - Steel | 2 | |
| CM389B-15 | MIL-DTL-38999 Series 4 Adaptor Tool for Plug Size 15(D) | 2 | |
| CM389B-17 | MIL-DTL-38999 Series 4 Adaptor Tool for Plug Size 17(E) | 2 | |
| CM389B-19 | MIL-DTL-38999 Series 4 Adaptor Tool for Plug Size 19(F) | 2 | |
| CM389B-21 | MIL-DTL-38999 Series 4 Adaptor Tool for Plug Size 21(G) | 2 | |
| CM389B-23 | MIL-DTL-38999 Series 4 Adaptor Tool for Plug Size 23(H) | 2 | |
| CM389B-25 | MIL-DTL-38999 Series 4 Adaptor Tool for Plug Size 25(J) | 2 | |
| CM389BR-11 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 11(B) | 2 | |
| CM389BR-13 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 13(C) | 2 | |
| CM389BR-15 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 15(D) | 2 | |
| CM389BR-17 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 17(E) | 2 | |
| CM389BR-19 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 19(F) | 2 | |
| CM389BR-21 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 21(G) | 2 | |
| CM389BR-23 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 23(H) | 2 | |
| CM389BR-25 | MIL-DTL-38999 Series 4 Adaptor Tool for Receptacle Size 25(J) | 2 | |
| CM389L-11 | MIL-DTL-38999 Series 1 Adaptor Tool for Plug Size 11 | 2 | |
| CM389L-11S | Adaptor Tool - Steel | 2 | |
| CM389L-13 | MIL-DTL-38999 Series 1 Adaptor Tool for Plug Size 13 | 3 | |
| CM389L-13S | Adaptor Tool - Steel | 2 | |
| CM389L-15 | MIL-DTL-38999 Series 1 Adaptor Tool for Plug Size 15 | 2 | |
| CM389L-17 | MIL-DTL-38999 Series 1 Adaptor Tool for Plug Size 17 | 2 | |
| CM389L-19 | MIL-DTL-38999 Series 1 Adaptor Tool for Plug Size 19 | 2 | |
| CM389L-21 | MIL-DTL-38999 Series 1 Adaptor Tool for Plug Size 21 | 2 | |
| CM389L-23 | MIL-DTL-38999 Series 1 Adaptor Tool for Plug Size 23 | 2 | |
| CM389L-25 | MIL-DTL-38999 Series 1 Adaptor Tool for Plug Size 25 | 2 | |
| CM389L-25S | ADAPTOR TOOL (STEEL) | 2 | |
| CM389L-9 | MIL-DTL-38999 Series 1 Adaptor Tool for Plug Size 9 | 2 | |
| CM389LR-11 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 11 | 2 | |
| CM389LR-13 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 13 | 2 | |
| CM389LR-15 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 15 | 2 | |
| CM389LR-17 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 17 | 2 | |
| CM389LR-19 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 19 | 2 | |
| CM389LR-21 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 21 | 2 | |
| CM389LR-23 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 23 | 2 | |
| CM389LR-25 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 25 | 2 | |
| CM389LR-9 | MIL-DTL-38999 Series 1 Adaptor Tool for Receptacle Size 9 | 2 | |
| CM389S-10 | MIL-DTL-38999 Series 2 Adaptor Tool for Plug Size 10 | 2 | |
| CM389S-12 | MIL-DTL-38999 Series 2 Adaptor Tool for Plug Size 12 | 2 | |
| CM389S-12S | Adaptor Tool - Steel | 2 | |
| CM389S-14 | MIL-DTL-38999 Series 2 Adaptor Tool for Plug Size 14 | 2 | |
| CM389S-14S | Adaptor Tool - Steel | 2 | |
| CM389S-16 | MIL-DTL-38999 Series 2 Adaptor Tool for Plug Size 16 | 2 | |
| CM389S-18 | MIL-DTL-38999 Series 2 Adaptor Tool for Plug Size 18 | 2 | |
| CM389S-20 | MIL-DTL-38999 Series 2 Adaptor Tool for Plug Size 20 | 2 | |
| CM389S-22 | MIL-DTL-38999 Series 2 Adaptor Tool for Plug Size 22 | 2 | |
| CM389S-22S | Adaptor Tool - Steel | 2 | |
| CM389S-24 | MIL-DTL-38999 Series 2 Adaptor Tool for Plug Size 24 | 2 | |
| CM389S-8 | MIL-DTL-38999 Series 2 Adaptor Tool for Plug Size 8 | 2 | |
| CM389T-11A | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 11(B) | 2 | |
| CM389T-11AS | Adaptor Tool - Steel | 2 | |
| CM389T-11B | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 11(B) | 2 | |
| CM389T-11BS | Adaptor Tool - Steel | 2 | |
| CM389T-13A | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 13(C) | 2 | |
| CM389T-13AS | Adaptor Tool - Steel | 2 | |
| CM389T-13B | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 13(C) | 2 | |
| CM389T-13BS | Adaptor Tool - Steel | 2 | |
| CM389T-15A | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 15(D) | 2 | |
| CM389T-15AS | Adaptor Tool - Steel | 2 | |
| CM389T-15B | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 15(D) | 2 | |
| CM389T-15BS | Adaptor Tool - Steel | 2 | |
| CM389T-17A | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 17(E) | 3 | |
| CM389T-17AS | Adaptor Tool - Steel | 2 | |
| CM389T-17B | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 17(E) | 2 | |
| CM389T-19A | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 19(F) | 2 | |
| CM389T-19B | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 19(F) | 2 | |
| CM389T-21A | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 21(G) | 2 | |
| CM389T-21AS | Adaptor Tool - Steel | 2 | |
| CM389T-21B | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 21(G) | 2 | |
| CM389T-23A | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 23(H) | 2 | |
| CM389T-23AS | Adaptor Tool - Steel | 2 | |
| CM389T-23B | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 23(H) | 2 | |
| CM389T-25A | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 25(J) | 3 | |
| CM389T-25AS | Adaptor Tool - Steel | 2 | |
| CM389T-25B | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 25(J) | 2 | |
| CM389T-9A | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 9(A) | 2 | |
| CM389T-9AS | Adaptor Tool - Steel | 2 | |
| CM389T-9B | MIL-DTL-38999 Series 3 Adaptor Tool for Plug Size 9(A) | 2 | |
| CM389T-9BS | Adaptor Tool - Steel | 2 | |
| CM389TR-11A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 11(B) | 2 | |
| CM389TR-11B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 11(B) | 2 | |
| CM389TR-13A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 13(C) | 2 | |
| CM389TR-13B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 13(C) | 2 | |
| CM389TR-15A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 15(D) | 2 | |
| CM389TR-15B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 15(D) | 2 | |
| CM389TR-17A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 17(E) | 2 | |
| CM389TR-17B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 17(E) | 2 | |
| CM389TR-19A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 19(F) | 2 | |
| CM389TR-19B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 19(F) | 2 | |
| CM389TR-21A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 21(G) | 2 | |
| CM389TR-21B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 21(G) | 2 | |
| CM389TR-23A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 23(H) | 2 | |
| CM389TR-23B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 23(H) | 2 | |
| CM389TR-25A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 25(J) | 2 | |
| CM389TR-25B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 25(J) | 2 | |
| CM389TR-9A | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 9(A) | 2 | |
| CM389TR-9B | MIL-DTL-38999 Series 3 Adaptor Tool for Receptacle Size 9(A) | 2 | |
| CM5015-10 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 10 | 2 | |
| CM5015-10S | Adaptor Tool - Steel | 2 | |
| CM5015-12 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 12 | 2 | |
| CM5015-12S | Adaptor Tool - Steel | 2 | |
| CM5015-14 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 14 | 2 | |
| CM5015-14S | Adaptor Tool - Steel | 1 | |
| CM5015-16 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 16 | 2 | |
| CM5015-16S | Adaptor Tool - Steel | 2 | |
| CM5015-18 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 18 | 2 | |
| CM5015-18S | Adaptor Tool - Steel | 2 | |
| CM5015-20 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 20 | 2 | |
| CM5015-20S | Adaptor Tool - Steel | 2 | |
| CM5015-22 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 22 | 2 | |
| CM5015-22S | Adaptor Tool - Steel | 2 | |
| CM5015-24 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 24 | 2 | |
| CM5015-24S | Adaptor Tool - Steel | 2 | |
| CM5015-28 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 28 | 2 | |
| CM5015-28S | Adaptor Tool - Steel | 2 | |
| CM5015-32 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 32 | 2 | |
| CM5015-32S | Adaptor Tool - Steel | 2 | |
| CM5015-36 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 36 | 3 | |
| CM5015-36S | Adaptor Tool - Steel | 2 | |
| CM5015-40 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 40 | 2 | |
| CM5015-40S | Adaptor Tool - Steel | 2 | |
| CM5015-44 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 44 | 2 | |
| CM5015-44S | Adaptor Tool - Steel | 2 | |
| CM5015-48 | AS50151 and MIL-DTL-83723 Adaptor Tool for Plug Size 48 | 2 | |
| CM5015-48S | Adaptor Tool - Steel | 2 | |
| CM5015-8 | Adaptor Tool - Aluminum | 2 | |
| CM5015-8S | Adaptor Tool - Steel | 2 | |
| CM5015R-10 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 10 | 2 | |
| CM5015R-12 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 12 | 2 | |
| CM5015R-14 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 14 | 2 | |
| CM5015R-16 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 16 | 2 | |
| CM5015R-18 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 18 | 2 | |
| CM5015R-20 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 20 | 2 | |
| CM5015R-22 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 22 | 2 | |
| CM5015R-24 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 24 | 2 | |
| CM5015R-28 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 28 | 2 | |
| CM5015R-28S | Adaptor Tool - Steel | 2 | |
| CM5015R-32 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 32 | 2 | |
| CM5015R-36 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 36 | 2 | |
| CM5015R-40 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 40 | 2 | |
| CM5015R-44 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 44 | 2 | |
| CM5015R-48 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 48 | 2 | |
| CM5015R-8 | AS50151 and MIL-DTL-83723 Adaptor Tool for Receptacle Size 8 | 2 | |
| CM602-10A | Pattern 602 Adaptor Tool for Plug Size 10 | 2 | |
| CM602-10B | Pattern 602 Adaptor Tool for Plug Size 10 | 2 | |
| CM602-12A | Pattern 602 Adaptor Tool for Plug Size 12 | 2 | |
| CM602-12B | Pattern 602 Adaptor Tool for Plug Size 12 | 2 | |
| CM602-14A | Pattern 602 Adaptor Tool for Plug Size 14 | 2 | |
| CM602-14B | Pattern 602 Adaptor Tool for Plug Size 14 | 2 | |
| CM602-16A | Pattern 602 Adaptor Tool for Plug Size 16 | 2 | |
| CM602-16B | Pattern 602 Adaptor Tool for Plug Size 16 | 2 | |
| CM602-18A | Pattern 602 Adaptor Tool for Plug Size 18 | 2 | |
| CM602-18B | Pattern 602 Adaptor Tool for Plug Size 18 | 2 | |
| CM602-20A | Pattern 602 Adaptor Tool for Plug Size 20 | 2 | |
| CM602-20B | Pattern 602 Adaptor Tool for Plug Size 20 | 2 | |
| CM602-22A | Pattern 602 Adaptor Tool for Plug Size 22 | 2 | |
| CM602-22B | Pattern 602 Adaptor Tool for Plug Size 22 | 2 | |
| CM602-24A | Pattern 602 Adaptor Tool for Plug Size 24 | 2 | |
| CM602-24B | Pattern 602 Adaptor Tool for Plug Size 24 | 2 | |
| CM602-8A | Pattern 602 Adaptor Tool for Plug Size 8 | 2 | |
| CM602-8B | Pattern 602 Adaptor Tool for Plug Size 8 | 2 | |
| CM815L-10A | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 10(B) | 2 | |
| CM815L-10B | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 10(B) | 2 | |
| CM815L-14A | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 14(D) | 2 | |
| CM815L-14B | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 14(D) | 2 | |
| CM815L-16A | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 16(E) | 2 | |
| CM815L-16B | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 16(E) | 2 | |
| CM815L-18A | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 18(F) | 2 | |
| CM815L-18B | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 18(F) | 2 | |
| CM815L-20A | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 20(G) | 2 | |
| CM815L-20B | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 20(G) | 2 | |
| CM815L-22A | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 22(H) | 2 | |
| CM815L-22B | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 22(H) | 2 | |
| CM815L-24A | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 24(J) | 2 | |
| CM815L-24B | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 24(J) | 2 | |
| CM815L-8A | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 8(A) | 2 | |
| CM815L-8B | MIL-C-81511 Series 1, 3 Adaptor Tool for Plug Size 8(A) | 2 | |
| CM815R-10 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 10(B) | 2 | |
| CM815R-14 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 14(D) | 2 | |
| CM815R-16 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 16(E) | 2 | |
| CM815R-18 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 18(F) | 2 | |
| CM815R-20 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 20(G) | 2 | |
| CM815R-22 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 22(H) | 2 | |
| CM815R-24 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 24(J) | 2 | |
| CM815R-8 | MIL-C-81511 Series 1, 2, 3, 4 Adaptor Tool for Receptacle Size 8(A) | 2 | |
| CM815S-10A | MIL-C-81511 Series 2 & 4 Adaptor Tool for Plug Size 10(B) | 2 | |
| CM815S-10B | MIL-C-81511 Series 2 & 4 Adaptor Tool for Plug Size 10(B) | 2 | |
| CM815S-14A | MIL-C-81511 Series 2 & 4 Adaptor Tool for Plug Size 14(D) | 2 | |
| CM815S-14B | MIL-C-81511 Series 2 & 4 Adaptor Tool for Plug Size 14(D) | 2 | |
| CM815S-16A | MIL-C-81511 Series 2 & 4 Adaptor Tool for Plug Size 16(E) | 2 | |
| CM815S-16B | MIL-C-81511 Series 2 & 4 Adaptor Tool for Plug Size 16(E) | 2 | |
| CM815S-18A | MIL-C-81511 Series 2 & 4 Adaptor Tool for Plug Size 18(F) | 2 | |
| CM815S-18B | MIL-C-81511 Series 2 & 4 Adaptor Tool for Plug Size 18(F) | 2 | |
| CM815S-8 | MIL-C-81511 Series 2 & 4 Adaptor Tool for Plug Size 8(A) | 2 | |
| CM837-10A | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 10 | 2 | |
| CM837-10AS | Adaptor Tool - Steel | 2 | |
| CM837-10B | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 10 | 2 | |
| CM837-10BS | Adaptor Tool - Steel | 2 | |
| CM837-12A | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 12 | 2 | |
| CM837-12AS | Adaptor Tool - Steel | 2 | |
| CM837-12B | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 12 | 2 | |
| CM837-12BS | Adaptor Tool - Steel | 2 | |
| CM837-14A | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 14 | 2 | |
| CM837-14AS | Adaptor Tool - Steel | 2 | |
| CM837-14B | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 14 | 2 | |
| CM837-14BS | Adaptor Tool - Steel | 2 | |
| CM837-16A | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 16 | 2 | |
| CM837-16AS | Adaptor Tool - Steel | 2 | |
| CM837-16B | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 16 | 2 | |
| CM837-16BS | Adaptor Tool - Steel | 2 | |
| CM837-18A | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 18 | 2 | |
| CM837-18AS | Adaptor Tool - Steel | 2 | |
| CM837-18B | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 18 | 2 | |
| CM837-18BS | Adaptor Tool - Steel | 2 | |
| CM837-20A | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 20 | 2 | |
| CM837-20AS | Adaptor Tool - Steel | 2 | |
| CM837-20B | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 20 | 2 | |
| CM837-20BS | Adaptor Tool - Steel | 2 | |
| CM837-22A | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 22 | 2 | |
| CM837-22AS | Adaptor Tool - Steel | 2 | |
| CM837-22B | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 22 | 2 | |
| CM837-22BS | Adaptor Tool - Steel | 2 | |
| CM837-24A | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 24 | 2 | |
| CM837-24AS | Adaptor Tool - Steel | 2 | |
| CM837-24B | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 24 | 2 | |
| CM837-24BS | Adaptor Tool - Steel | 2 | |
| CM837-28A | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 28 | 2 | |
| CM837-28AS | Adaptor Tool - Steel | 2 | |
| CM837-28B | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 28 | 2 | |
| CM837-28BS | Adaptor Tool - Steel | 2 | |
| CM837-8A | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 8 | 2 | |
| CM837-8AS | Adaptor Tool - Steel | 2 | |
| CM837-8B | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 8 | 2 | |
| CM837-8BS | Adaptor Tool - Steel | 2 | |
| CM837-8C | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 8 | 2 | |
| CM837-8CS | Adaptor Tool - Steel | 2 | |
| CM837-8D | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Plug Size 8 | 2 | |
| CM837-8DS | Adaptor Tool - Steel | 2 | |
| CM837RB-10 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 10 | 2 | |
| CM837RB-12 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 12 | 2 | |
| CM837RB-14 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 14 | 2 | |
| CM837RB-16 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 16 | 2 | |
| CM837RB-18 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 18 | 2 | |
| CM837RB-20 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 20 | 2 | |
| CM837RB-22 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 22 | 2 | |
| CM837RB-24 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 24 | 2 | |
| CM837RB-24S | Adaptor Tool - Steel | 2 | |
| CM837RB-8 | MIL-DTL-26500 and MIL-DTL-83723 Series 3 Adaptor Tool for Receptacle Size 8 | 2 | |
| CMS5015 | ADAPTOR TOOL SET | 2 | |
| CMSJT-10 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-12 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-14 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-16 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-18 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-20 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-22 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-24 | Adaptor Tool - Aluminum | 2 | |
| CMSJT-8 | Adaptor Tool - Aluminum | 2 | |
| D22173 | TOOL, NLG JACK ADAPTOR | 2 | |
| D44-7521-00-00-ST | PRESSURE TOOL (ADAPTOR FOR NEW COOLANT TANK) | 1 | |
| D578 | ADAPTOR TOOL IDG BLEED | 1 | |
| DMC1682 | DMC1682 All DMC MIL-SPEC Adaptor Tool Kit | 2 | |
| DMC2175 | DMC2175 Adaptor Tool Kit for D38999 Connectors | 2 | |
| DRT67093SER055 | ADAPTOR HOLDING TOOL | 1 | |
| DRT68822 | TORQUE ADAPTOR -LOAN TOOL FROM MESSIER | 9 | |
| DRT68835 | ADAPTOR-TORQUE IT SHOULD BE ISSUE 6, LATEST ISSUE OF THIS TOOL | 5 | |
| F45109-22 | ENGINE UNIV. PROTR. ADAPTOR TOOL | 1 | |
| F70206-1 | FUEL LEAK ADAPTOR TOOL | 12 | |
| F70300-1 | FLAP DRIVE ADAPTOR TOOL | 24 | |
| F70333-25 | TOOL - CSD ADAPTOR | 8 | |
| F72867-1 | TOOL-CONT WHL TORQUE ADAPTOR | 23 | |
| F80122-4 | SPLINE DRIVE ADAPTOR TOOL | 5 | |
| FRDH141 | 7/16 TORQUE ADAPTOR TOOL | 12 | |
| FSI680B46 | ADAPTOR HYDRO-SHIFT TOOLS | 1 | |
| FX1928-B23 | CRADLE ADAPTOR TOOL | 1 | |
| G1003521040-001 | Altitude Simulator Tool Adaptor Kit | 3 | |
| G1003521040−001 | Altitude Simulator Tool Adaptor kit | 3 | |
| G601R521118-1 | TOOL, PAX DOOR EXTERNAL HANDLE ADAPTOR | 4 | |
| GREASEANGADAPT0R | GREASE ANGLE ADAPTOR TOOL. | 1 | |
| GS18299-1 | TOOL (BALANCE KIT ADAPTOR) | 2 | |
| HC130H0030-000 | PURGE VALVE ADAPTOR TOOL | 3 | |
| HU35451 | EXTRACTOR ADAPTOR TOOL | 9 | |
| HU37594 | ADAPTOR - CHOCKING PAD AND SLIDER, REMOVAL TOOL. | 14 | |
| HU40025 | ADAPTOR - ROTATE HP SYSTEM [TURNING TOOL] | 15 | |
| HU44819 | ADAPTOR - CHOCKING PAD AND SLIDER, REMOVAL TOOL. | 9 | |
| HU55083-70 | IDG ADAPTOR TOOL | 1 | |
| HU55330 | TOOL: ADAPTOR SUPPORT | 1 | |
| HU55437-2 | TOOL: ADAPTOR | 10 | |
| HU55736-1 | TOOL: ADAPTOR R/I ID | 3 | |
| HU55761 | HOIST ADAPTOR KIT-TOOLS | 14 | |
| HU87542 | TORQUE ADAPTOR TOOL | 1 | |
| IAE1N20023 | TORQUE ADAPTOR TOOL | 17 | |
| IAEN20023 | TORQUE ADAPTOR TOOL | 1 | |
| IDG ADAPTOR | IDG ADAPTOR TOOL | 1 | |
| J47868 | REM TOOL/ADAPTOR | 1 | |
| JIC-ADAPTORS | PIPE ADAPTORS TOOL | 1 | |
| K-4617 | ACMP 2 REMOVAL & INSTALL TOOL ADAPTOR | 1 | |
| K24001-1 | HOIST ADAPTOR ASSEMBLY TOOL | 10 | |
| K9ADAP | K9 RIG ADAPTORS TOOL | 1 | |
| KM9RF9812 | KIT ADAPTOR TOOL | 1 | |
| LBOA-20 | ASSY OFFSET ADAPTOR (TOOL) | 2 | |
| LIFTBEAM-FORK-ADAP | LIFTING BEAM, FORKLIFT ADAPTOR TOOL | 1 | |
| M21930 | TORQUE ADAPTOR TOOL | 29 | |
| M81969-39-01 | TOOL ADAPTOR | 24 | |
| MLGEMB170 | TOOL, MLG HANDLIGN TROLLEY ADAPTOR SET | 1 | |
| NITROGEN- ADAPTOR | ADAPTOR STRAIGHT AND 90 DEG TOOL | 1 | |
| NLGH0ISTADAPT0R | NLG HOIST ADAPTOR TOOL | 1 | |
| OXYGEN ADAPTOR KIT | OXYGEN ADAPTOR AND TUBE ASSY TOOL | 1 | |
| OXYGEN-ADAPTORS | 6-OFF OXYGEN ADAPTOR TOOL | 1 | |
| P18815DM-4 | PROBE ADAPTOR TOOL | 2 | |
| P75701-3 | 757 PITOT PROBE ADAPTOR TOOL | 10 | |
| PA-0036-A | PITOT STATIC ADAPTOR TOOL | 2 | |
| PSS-22300 | BOEING PITOT ADAPTOR TOOL | 1 | |
| PWA211825 | ADAPTOR, REMOVING TOOL (FOR NEO) | 4 | |
| PWA85433 | ADAPTOR FUEL TOOL | 7 | |
| PWA85451 | ADAPTOR FULE PRESSURE TOOL | 4 | |
| PWC37122 | TOOL;ADAPTOR | 1 | |
| PWC37124 | TOOL;ADAPTOR | 1 | |
| PWC37129 | TOOL;ADAPTOR | 1 | |
| PWC37825 | TOOL;ADAPTOR | 3 | |
| PWC37935 | TOOL;ADAPTOR | 1 | |
| PWC38013 | TOOL;ADAPTOR | 1 | |
| PWC38018 | TOOL;ADAPTOR | 1 | |
| PWC38022 | TOOL;ADAPTOR | 2 | |
| PWC38313 | TOOL;ADAPTOR | 1 | |
| PWC59053 | ADAPTOR TOOL ( COMPRESSOR WASH) | 8 | |
| Q46100 | TORQUE ADAPTOR TOOL | 10 | |
| R46014 | TOOL INT/REM ADAPTOR NOSE | 28 | |
| RF6916W | ROSAN WRENCH TOOL OUTLET ADAPTOR | 2 | |
| RF9816DEK | ROSAN LOCKRING DRIVE TOOL OUTLET ADAPTOR | 1 | |
| RF9824W | ROSAN COMBINATION WRENCH AND DRIVE TOOL INLET ADAPTOR | 1 | |
| RIGIDADAPTORS | RIGID ADAPTOR TOOL | 1 | |
| RRT105237 | TORQUE TOOL BRIDGE ADAPTOR | 1 | |
| RSE1164 | TORQUE ADAPTOR TOOL | 6 | |
| RSE1165 | Torque Adaptor Tool Door Latches | 12 | |
| RSE1234 | TORQUE ADAPTOR TOOL | 17 | |
| SB295330002K03A | ADAPTOR ASSEMBLY TOOL | 1 | |
| SKA100-4 | STATIC ADAPTOR TOOL | 4 | |
| SM4215 | ADAPTOR (FOR CALIBRATING THE TOOL WITH THE CABLE ASSEMBLY) | 1 | |
| ST2575A-1 | TORQUE ADAPTOR TOOL | 1 | |
| ST2580-267 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 15 | |
| ST2580-267-10 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-10-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-10-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-12-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-14-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-16-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-18-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-19-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-20-3-5-F | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-201-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-21-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-210-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-22-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-228-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-24-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 2 | |
| ST2580-267-24-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-4-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-242-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-245-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-29-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-36-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-40-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-48-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-60-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| SWE18934-50 | SWEENEY TURNING TOOL ADAPTOR – PW4000 MANUAL DRIVE PAD | 1 | |
| T-TANK-ADAPTOR-PLATE | TOILET TANK ADAPTOR PLATE TOOL | 1 | |
| T642G1001101 | FREQUENCY ADAPTOR RESTRAINER TOOL | 1 | |
| TF50B71307 | TOOL, ENGINE HOIST ADAPTOR | 2 | |
| TORQUE-ADAPTOR-1/2 | 1/2" TORQUE ADAPTOR TOOL | 1 | |
| TORQUE-ADAPTOR-11/16 | 11/16" TORQUE ADAPTOR TOOL | 1 | |
| TORQUE-ADAPTOR-13/16 | 13/16" TORQUE ADAPTOR TOOL | 1 | |
| TORQUE-ADAPTOR-3/4 | 3/4" TORQUE ADAPTOR TOOL | 1 | |
| TORQUE-ADAPTOR-3/8 | 3/8" TORQUE ADAPTOR TOOL | 1 | |
| TORQUE-ADAPTOR-5/16 | 5/16" TORQUE ADAPTOR TOOL | 1 | |
| TORQUE-ADAPTOR-5/8 | 5/8" TORQUE ADAPTOR TOOL | 1 | |
| TORQUE-ADAPTOR-7/16 | 7/16" TORQUE ADAPTOR TOOL | 1 | |
| TORQUE-ADAPTOR-9/16 | 9/16" TORQUE ADAPTOR TOOL | 1 | |
| TRIPOD JACK ADAPT | JACKING ADAPTOR TOOL | 1 | |
| UT1277 | E4 ENGINE ADAPTOR TOOL | 1 | |
| WET SPLINE ADAPTOR | ADAPTOR IDG TOOL | 1 | |
| WING-ADAPT | ADAPTOR FOR RIB 1 NDT TOOL | 1 | |
| Z1064 | OXYGEN CHARGING ADAPTOR TOOL | 2 | |
| Z1065 | OXYGEN CHARGING ADAPTOR TOOL | 2 | |
| Z1066 | OXYGEN CHARGING ADAPTOR TOOL | 2 | |
| Z1067 | OXYGEN CHARGING ADAPTOR TOOL | 2 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
