| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 98AMS172321000 | ADAPTOR - WRENCH | 10 | |
| 98AMS172321003 | ADAPTOR - WRENCH | 13 | |
| AB20001-DZ6 | ADAPTOR - WRENCH | 1 | |
| AB20001-SR3 | ADAPTOR - WRENCH | 1 | |
| F80020-5 | ADAPTOR - WRENCH | 16 | |
| GS20020-1 | ADAPTOR - WRENCH | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| (CALIB) 98A57104004000 | ADAPTOR ADAPTOR-TORQUE WRENCH (CALIBRATION) (CALIBRATION) | 1 | |
| 0111547 | ADAPTOR-WRENCH,TORQUE | 1 | |
| 2895071 | ADAPTOR-TORQUE WRENCH,APU G/SHAFT | 2 | |
| 58290010 | 7370/10-TORQUE WRENCH ADAPTOR | 1 | |
| 58290040 | 7370/40-TORQUE WRENCH ADAPTOR | 1 | |
| 58290041 | 7370/40-1-TORQUE WRENCH ADAPTOR | 1 | |
| 460004750 | Adaptor - torque wrench,MLG pintle pin rem/inst | 2 | |
| 460007036 | ADAPTOR,SOCKET WRENCH,A-LINK NUT SPANNER | 9 | |
| 856A1098G01 | ADAPTOR TORQUE WRENCH- HP | 5 | |
| 856A1498G01 | WRENCH ADAPTOR - SET (2 EA) | 7 | |
| 98A57104004000 | ADAPTOR-TORQUE WRENCH | 6 | |
| 98AMS172321000 | ADAPTOR- WRENCH | 10 | |
| 98AMS172327000 | HOOK WRENCH - ADAPTOR | 2 | |
| 98AMS172341002 | WRENCH- ADAPTOR | 12 | |
| 98D54503000001 | HOOK WRENCH - ADAPTOR SET | 6 | |
| 98D54503001000 | HOOK WRENCH - ADAPTOR | 9 | |
| 98F57508702000 | ADAPTOR-WRENCH, INBOARD FLAP | 5 | |
| 98F57508703000 | ADAPTOR-WRENCH | 7 | |
| A32004-1 | WRENCH - ADAPTOR | 12 | |
| A32025-1 | WRENCH ADAPTOR - WHEEL RET. AXLE NUT | 19 | |
| A32069-7 | WRENCH ADAPTOR - RETAINING NUT | 20 | |
| A32101-1 | WRENCH ADAPTOR - AXLE NUT - NLG | 27 | |
| AT31799 | ADAPTOR - TORQUE WRENCH, WHEEL SENSOR | 6 | |
| BMH-NR1016321 | TORQUE WRENCH-CYCLEAN ADAPTOR | 1 | |
| BMHNR1016321 | TORQUE WRENCH-CYCLEAN ADAPTOR | 1 | |
| C27001-16 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 7 | |
| C27017-1 | Adaptor Set - Torque Wrench T/E Flaps | 3 | |
| C27061-1 | ADAPTOR-WRENCH, FLIGHT SPOILER | 6 | |
| C32013-1 | SPL-11076 Torque Wrench Adaptor | 16 | |
| C32013-15 | WRENCH ADAPTOR - RETAINING NUT, AFT0 | 8 | |
| C32013-16 | WRENCH ADAPTOR - RETAINING NUT, AFT BEARING TRUNION MLG | 4 | |
| C32013-9 | WRENCH ADAPTOR - RETAINING NUT, AFT BEARING TRUNION MLG | 4 | |
| C32029-3 | WRENCH ADAPTOR-PIN INSTALLATION/REMOVAL KIT MLG | 4 | |
| C32029-4 | WRENCH ADAPTOR-PIN INSTALLATION/REMOVAL KIT MLG | 3 | |
| C32029-45 | ASSEMBLY - WRENCH ADAPTOR (C32029-31 PART OF KIT C32029-38 OR C32029-45) | 19 | |
| C32029-5 | WRENCH ADAPTOR-PIN INSTALLATION/REMOVAL KIT MLG | 3 | |
| C32029-6 | WRENCH ADAPTOR-PIN INSTALLATION/REMOVAL KIT MLG | 6 | |
| C32029-7 | WRENCH ADAPTOR-PIN INSTALLATION/REMOVAL KIT MLG | 6 | |
| C47241 | WRENCH-ADAPTOR | 4 | |
| C47261 | A300-600 ADAPTOR-WRENCH NLG | 23 | |
| C71014-1 | Wrench Adaptor-Aft Cone Bolt | 18 | |
| DRT68032 | ADAPTOR,SOCKET WRENCH,A-LINK NUT SPANNER | 10 | |
| F70326-1 | Torque Wrench Adaptor - Manual Stabilizer Trim Wheel | 15 | |
| F80017-23 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 12 | |
| F80020-5 | WRENCH ADAPTOR - MAIN GEAR TRUNNION PIN | 16 | |
| F80032-1 | WRENCH ADAPTOR-FACE SPANNER LUG | 7 | |
| F80033-1 | ADAPTOR ASSEMBLY-WRENCH,HOOK SPANNER | 22 | |
| F80033-8 | ADAPTOR ASSY - WRENCH, HOOK SPANNER | 22 | |
| F80040-2 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 29 | |
| F80122-11 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 2 | |
| F80122-12 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 5 | |
| F80122-13 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 2 | |
| F80122-14 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 13 | |
| F80122-15 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 12 | |
| F80122-16 | ADAPTOR EQUIPMENT - TORCH WRENCH FLAP DRIVE TRANSMISSION | 11 | |
| F80171-1 | ADAPTOR-TORQUE WRENCH | 8 | |
| F80176-8 | WRENCH ADAPTOR - TORQUE. | 16 | |
| FAT02-35-41000 | ADAPTOR WRENCH, SHOCK ABSORBER-MLG | 1 | |
| G34002-1 | WRENCH - ADAPTOR | 21 | |
| G600-520001-1 | ADAPTOR - PAX DOOR TORQUE WRENCH | 1 | |
| G601R521104-1 | ADAPTOR - PAX DOOR TORQUE WRENCH | 7 | |
| GFRES20NP | WRENCH-ADAPTOR 3/8 DR | 1 | |
| GLRDH34D10104 | TORQUE WRENCH ADAPTOR 3/4"D - 1 & 1/4" | 1 | |
| GLRDH34D10116 | TORQUE WRENCH ADAPTOR 3/4'D - 1 & 1/16 | 1 | |
| GLRDH3836CL | TORQUE WRENCH ADAPTOR 1"D - 1 & 3/16" | 1 | |
| GLRDH4036CL | TORQUE WRENCH ADAPTOR 1"D - 1 & 1/4" | 1 | |
| GLRDH4436CL | TORQUE WRENCH ADAPTOR 1"D - 1 & 3/8" | 1 | |
| Gedore-012700 | Gedore 012700 HEX SETTING ADAPTOR 3.2-5.5 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012705 | Gedore 012705 HEX SETTING ADAPTOR 6-9 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012710 | Gedore 012710 HEX SETTING ADAPTOR 10-13 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012715 | Gedore 012715 HEX SETTING ADAPTOR 14-17 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012720 | Gedore 012720 HEX SETTING ADAPTOR 18-21 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-012722 | Gedore 012722 HEX SETTING ADAPTOR 22-25 mm, Torque Wrench End Fittings (Captive pin) | 1 | |
| Gedore-A37610 | Gedore A37610 HEX ADAPTOR 1 - 2.5mm, Torque Wrench End Fittings | 1 | |
| Gedore-A37620 | Gedore A37620 HEX ADAPTOR 3 - 5mm, Torque Wrench End Fittings | 1 | |
| Gedore-A38350 | Gedore A38350 HEX ADAPTOR 6-8mm, Torque Wrench End Fittings | 1 | |
| HC130H0129-000 | Adaptor - torque wrench, passenger & service door | 2 | |
| J32032-22 | ADAPTOR ASSEMBLY, WRENCH-LG WHEEL RETAINING NUT MLG | 23 | |
| K27069-1 | TORQUE WRENCH ADAPTOR- NO BACK BRAKE | 7 | |
| MIT65B81276 | ADAPTOR, TORQUE WRENCH - NOSE LANDING GEAR | 1 | |
| RF6912W | WRENCH-FLUID ADAPTOR | 1 | |
| SD12540-1 | WRENCH- TORQUE ADAPTOR, PROP BOLTS (USED WITH RETRACTION CLAMP SD12559-1) | 1 | |
| SRES18 | WRENCH- TORQUE ADAPTOR, PROP BOLTS (USED WITH RETRACTION CLAMP SD12559-1) | 4 | |
| ST2580-242 | Torque Wrench Adaptor - Box Type | 1 | |
| ST2580-267 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 15 | |
| ST2580-267-10 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-10-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-10-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-12-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-14-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-16-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-18-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-19-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-20-3-5-F | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-20-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-201-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-21-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-210-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-22-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-228-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 3 | |
| ST2580-267-24-3-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 2 | |
| ST2580-267-24-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-24-4-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-242-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-245-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-26-4-5 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-28-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-29-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-32-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-36-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-40-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-48-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| ST2580-267-60-3-7 | Standard tool-spanner wrench adaptor for bacn10rf-nuts | 1 | |
| WAVMPOL12 | WRENCH ADAPTOR T-TYPE | 1 | |
| Z0111429 | ADAPTOR-WRENCH,TORQUE | 1 | |
| Z0111487 | ADAPTOR-WRENCH,TORQUE | 1 | |
| Z0111547 | ADAPTOR-WRENCH,TORQUE | 1 | |
| Z0111661 | ADAPTOR-WRENCH,TORQUE | 1 | |
| Z0111662 | ADAPTOR-WRENCH,TORQUE | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
