| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 2566497 | Adapter Puller | 1 | |
| 287077-1 | ADAPTER PULLER | 1 | |
| 6797662 | ADAPTER PULLER | 1 | |
| 853-202-475-0 | ADAPTER PULLER | 1 | |
| 856A2663 | ADAPTER PULLER | 2 | |
| 856A2663G01 | ADAPTER PULLER | 23 | |
| 856A3419G02 | ADAPTER PULLER | 22 | |
| 856A3500G01 | ADAPTER PULLER | 17 | |
| 856A3707G05 | ADAPTER PULLER | 11 | |
| 9970-957-199 | ADAPTER PULLER | 1 | |
| AGE10041 | Adapter Puller | 1 | |
| PWA80156 | ADAPTER PULLER | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 1C5678 | ADAPTER, PULLER - SEAL, NO. 6R BEARING | 1 | |
| 1C8344 | PULLER, SHAFT- FORWARD ADAPTER | 1 | |
| 1C8344G01 | Puller Shaft - Forward Adapter, LPT | 1 | |
| 21A00355 | WIRE PULLER ADAPTER | 3 | |
| 21A00355-1 | ADAPTER - WIRE PULLER PLIERS - SPREADER, | 1 | |
| 23034275 | ADAPTER--PILOT, COMPRESSOR REAR BEARING PULLER U | 1 | |
| 23068498 | Adapter – Arbor Press, Plate Puller | 1 | |
| 23068498-2 | ADAPTER, PULLER | 1 | |
| 291967-4 | PULLER ADAPTER | 1 | |
| 291967-6 | PULLER ADAPTER | 1 | |
| 291967-7 | PULLER ADAPTER ROTORSEAL | 1 | |
| 293894-1 | STATER HOUSING PULLER ADAPTER | 1 | |
| 294861-1 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN LARGER ID OF 3860168I STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294861-2 | BEARING REMOVAL ADAPTER (USED TO LOCATE IN SMALLER ID OF 38601681 STARTER GEAR TO PROVIDE A PRESSING SURFACE WHEN PRESSING GEAR FROM 3860160-1 BALL BEARING. USE WITH PROTO PULLER 4214 AND 294870-4 BEARING REMOVAL PLATE) | 1 | |
| 294912-1 | FAN ASSEMBLY PULLER ADAPTER | 1 | |
| 294912-2 | ADAPTERPULLER,FAN ASSY | 1 | |
| 294912-2A | FAN ASSEMBLY PULLER ADAPTER | 1 | |
| 298062-1 | Spline Adapter Puller Set | 1 | |
| 298131 | ADAPTER KIT, TURBINE SUPPORT PULLER | 1 | |
| 298131-1 | Adapter Kit, Turb Support Puller | 1 | |
| 2C14906G01 | PULLER, DRIVE ADAPTERS ‐ ROTOR BALANCING | 1 | |
| 2C6009 | PULLER, ADAPTER- NO 4 BRG ROTATING AIR & OIL SEAL | 2 | |
| 2C6009G01 | NO. 4 BRG AIR/OIL SEAL PULLER ADAPTER | 1 | |
| 2C6009G01 | PULLER,ADAPTER-NO.4 BEARING AI | 1 | |
| 2C6047 | PULLER, ADAPTER - NO.4 BRG INNER RACES & FWD SEAL | 2 | |
| 2C6047G01 | PULLER ADAPTER-NO. 4 BEARING | 1 | |
| 2C6047G02 | NO. 4 BEARING INNER RACES AND FORWARD SEAL PULLER ADAPTER | 1 | |
| 2C6048 | PULLER, ADAPTER - AFT AIR SEAL & SPLIT NUT SPANNER | 2 | |
| 2C6048G01 | PULLER ADAPTER-AIR SEAL AND | 1 | |
| 2C6048G03 | SPLIT NUT RETAINER PULLER ADAPTER | 1 | |
| 2C6049 | ADAPTER, PULLER, HPCR | 1 | |
| 2C6049G01 | PULLER ADAPTER-ROTATING AIR | 1 | |
| 340559 | HINGE PIN PULLER ADAPTER | 1 | |
| 5120-00-227-0633 | ADAPTER MECHANICAL PULLER | 1 | |
| 5120-00-227-0635 | ADAPTER MECHANICAL PULLER | 1 | |
| 5120-00-227-0636 | ADAPTER MECHANICAL PULLER | 1 | |
| 5120-00-357-518 | ADAPTER MECHANICAL PULLER | 1 | |
| 5120-00227-0634 | ADAPTER MECHANICAL PULLER | 1 | |
| 6796265 | PULLER - TURB COUPLING SHAFT ADAPTER | 1 | |
| 6797175 | PULLER - TURBINE COUPLING SHAFT ADAPTER | 1 | |
| 6798845 | PULLER TURBINE SECOND STAGE SPLINED ADAPTER | 1 | |
| 6872832 | PULLER - COMPRESSOR ADAPTER | 2 | |
| 6891195 | PULLER - COMPRESSOR ROTOR SPLINED ADAPTER | 2 | |
| 6897868 | PULLER - SPLINED ADAPTER | 2 | |
| 846-501-900 | ADAPTER PULLER– FAN BLADES SHIM | 1 | |
| 846-502-000 | ADAPTER PULLER – FAN BLD PLATF | 1 | |
| 856A-2573-G01 | Adapter, Puller | 6 | |
| 856A-2700-G01 | Adapter, Puller | 13 | |
| 856A-3500-G01 | Adapter, Puller | 17 | |
| 856A2572 | PULLER ADAPTER | 1 | |
| 856A2573 | ADAPTER PULLER, LP | 2 | |
| 856A2573G01 | ADAPTER, PULLER | 6 | |
| 856A2632G01 | PULLER ADAPTER (.250 THREAD) | 23 | |
| 856A2632G01 | PULLER - ADAPTER, COMPONENT REMOVAL | 23 | |
| 856A2663 | ADAPTER, PULLER - SPLITTER FAIRING | 2 | |
| 856A2663G01 | ADAPTER PULLER, SPLITTER FAIR. | 23 | |
| 856A2668 | KIT-PULLER ADAPTERS | 4 | |
| 856A2668G01 | KIT, PULLER ADAPTERS | 1 | |
| 856A2668G02 | KIT - PULLER ADAPTER | 14 | |
| 856A2668P24 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P28 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P30 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P32 | PULLER ADAPTER | 4 | |
| 856A2668P37 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2668P43 | REPLACEMENT PART FOR 856A2668G02 PULLER ADAPTER SET | 1 | |
| 856A2685 | ADAPTER, PULLER | 1 | |
| 856A2685G02 | PULLER ADAPTER - OIL INLET COVER | 1 | |
| 856A2685G03 | PULLER ADAPTER - OIL INLET COVER | 5 | |
| 856A2694G01 | PULLER ADAPTER - FAN BLADE SPACERS | 4 | |
| 856A2700 | ADAPTER,PULLER-FAN BLADE SPACERS | 3 | |
| 856A2700 G01 | Puller Adapter - Fan Blade Spacers | 13 | |
| 856A2700G01 | ADAPTER PULLER-FAN BLADE SPACERS | 13 | |
| 856A2701G01 | PULLER ADAPTER - FAN BLADE SPACERS | 1 | |
| 856A2819 | ADAPTER PULLER/PUSHER | 1 | |
| 856A2819G01 | ADAPTER PULLER/PUSHER | 2 | |
| 856A2835 | ADAPTER PULLER/PUSHER | 1 | |
| 856A2835G01 | ADAPTER PULLER/PUSHER | 1 | |
| 856A2991 | ADAPTER PULLER/PUSHER | 1 | |
| 856A2991G01 | ADAPTER PULLER/PUSHER | 5 | |
| 856A3286G01 | TOOL SET, PULLER ADAPTER | 1 | |
| 856A3328G01 | ADAPTER PULLER - NO.1 AND NO.2 BEARING OIL NOZZLE | 5 | |
| 856A3362G01 | Adapter Puller Filter | 1 | |
| 856A3419 | ADAPTER, PULLER - OIL INLET COVER | 2 | |
| 856A3419 G01 | Adapter Puller Cover Oil Inlet | 2 | |
| 856A3419 G02 | Adapter Puller ‐ Oil Inlet Cover & Major Module | 22 | |
| 856A3419 REV B | ADAPTER, PULLER COVER OIL INLET | 1 | |
| 856A3419G01 | ADAPTER, PULLER COVER OIL INLET | 2 | |
| 856A3419G02 | ADAPTER, PULLER COVER OIL INLET | 22 | |
| 856A3500 | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500 G01 | Adapter Puller ‐ Fan Blade Spacers | 17 | |
| 856A3500 REV A | ADAPTER, PULLER-FAN BLADE SPACERS | 1 | |
| 856A3500G01 | ADAPTER, PULLER FAN BLADE SPACER | 17 | |
| 856A3500G01 | ADAPTER, PULLER | 17 | |
| 856A3500P02 | ADAPTER PULLER FAN BLADE | 2 | |
| 856A3707G04 | PULLER ADAPTER | 1 | |
| 856A3905G01 | ADAPTER PULLER FAN B | 4 | |
| 856A668G02 | KIT PULLER ADAPTER | 1 | |
| 856S2700 | ADAPTER PULLER FAN BLADE SPACERS | 1 | |
| 856S2700 REV B | ADAPTER PULLER FAN BLADE SPACERS | 1 | |
| 956A7015G01 | SPLITTER FAIRING PULLER ADAPTER | 3 | |
| 9970-957-199 | ADAPTER, PULLER - COVER, PUMP ASSY | 1 | |
| AGE10059 | Puller Adapter | 2 | |
| AGE13505 | ADAPTER, PUMP PULLER | 1 | |
| AGE15841 | PULLER ADAPTER | 1 | |
| AGE15842 | PULLER ADAPTER | 1 | |
| AGE15843 | PULLER ADAPTER | 1 | |
| AGE15844 | PULLER ADAPTER | 1 | |
| B12006-1 | PULLER-ADAPTER | 15 | |
| C32027-27 | Puller Adapter Assembly | 1 | |
| C54009-16 | PULLER ADAPTER | 1 | |
| DZZ7230-1 | CGO DOOR HINGE PIN PULLER ADAPTER | 2 | |
| DZZ7230-501 | ADAPTER HINGE PULLER | 1 | |
| DZZ7230-503 | Adapter-hinge pin puller，cargo door | 1 | |
| DZZ7243-501 | Set-adapter，axle sleeve puller，NLG | 1 | |
| FTI-MB/LB-A1 | Puller Unit: MB-XX Mandrel Adapter - Allows LB Mandrel and Nosecap to attach to MB Puller Unit | 1 | |
| GS11865 | PULLER - SHAFT ADAPTER | 1 | |
| J27084-7 | Puller adapter assy 3 | 1 | |
| J32036-32 | PULLER ADAPTER | 1 | |
| J32036-64 | PULLER ADAPTER | 1 | |
| K32015-4 | Puller adapter assy | 1 | |
| LBRA-7 | RIGHT ANGLE ADAPTER (PULLER) | 2 | |
| LTCT 7285-01 | PULLER ADAPTER | 1 | |
| LTCT30328-01 | Adapter, Puller Kit | 1 | |
| LTCT7285 | ADAPTER, MECHANICAL PULLER | 1 | |
| LTCT7923-04 | ADAPTER,MECHANICAL PULLER | 1 | |
| OTC503896 | RACE PULLER ADAPTER | 1 | |
| PWA 28170 | FIXTURE ADAPTER PULLERS | 2 | |
| PWA12292 | Puller PWA 102987 Adapter (Gearbox Installed) | 5 | |
| PWA211901 | ADAPTER, PULLER | 1 | |
| PWA80156 | ADAPTER PULLER GEARBOX SEAL ROTATING RING REMOVAL HYD PUMPS FP/FB | 1 | |
| PWA80157 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL IDGS | 1 | |
| PWA80158 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING REMOVAL STARTER | 1 | |
| PWA80222 | ADAPTER PULLER GEARBOX FACE SEAL ROTATING RING DEOILER | 1 | |
| PWC30046-07 | PULLER – SEAL CARRIER, ADAPTER HEAD –7, ONLY | 1 | |
| PWC30128-13 | PULLER VALVE ADAPTER | 5 | |
| PWC34601 | PULLER, ADAPTER | 1 | |
| PWC37077 | ADAPTER, PULLER, OIL SEAL CARRIER, STARTER-GEN & FUEL PUMP | 10 | |
| PWC37077-A | Adapter Puller | 2 | |
| PWC37728 | PULLER-INSTALL CHIP DETECTOR ADAPTER | 11 | |
| PWC37728/PHP | PULLER-INSTALL CHIP DETECTOR ADAPTER | 1 | |
| PWC37728A | PULLER, CHIP DETECTOR ADAPTER | 1 | |
| PWC48468 | PULLER SPLINE ADAPTER REMOVAL | 4 | |
| PWC61512 | PULLER (SPLINE ADAPTER REMOVAL) | 3 | |
| PWC67179 | Puller Adapter | 1 | |
| PWS-44108 | Puller Adapter | 1 | |
| RB PWC70822 | Puller Adapter | 1 | |
| RB PWC71026 | Puller / Pusher Adapter | 1 | |
| RB PWC71027 | Puller/Adapter | 1 | |
| RB PWC71030 | Puller Adapter | 1 | |
| RB23034275 | Adapter-Pilot, Rear Compressor Bearing Puller | 1 | |
| RB6798845 | PULLER TURBINE SECOND STAGE SPLINED ADAPTER | 2 | |
| RB6872832 | Compressor Adapter Coupling Puller | 2 | |
| RB6891195 | Puller, Compressor Rotor Splined Adapter | 2 | |
| RB6897868 | Gasifier Turbine Splined Adapter Puller | 2 | |
| RBW6305G19231-3G | Puller Rotor Brake Adapter Flange Remover | 2 | |
| SPL-8854 | ADAPTER - PULLER, OIL INLET COVER | 1 | |
| ST1350C/LB-2 | Adapts FTI Mandrels (-1) and LB Nosecaps to -5 MB mandrel adapter/LB nosecap to MB-Z/XX puller | 1 | |
| ST93014 | Adapter, Puller | 2 | |
| ST93014 PM | ADAPTER, PULLER | 1 | |
| T-J4240-12F | PULLER ADAPTER FEMALE 5/8 | 1 | |
| T-J4240-12M | PULLER ADAPTER MALE 5/8-3 | 1 | |
| T-J4240-14F | PULLER ADAPTER FEMALE 5/8 | 1 | |
| T-J4240-14M | PULLER ADAPTER MALE 5/8-7 | 1 | |
| U.53H3 | EXPANSION PULLER ADAPTER | 1 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
