| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| PWC42041 | Adapter PT nut | 3 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
| 0U141830 | TORQUE WRENCH ADAPTER PISTON NUT | 1 | |
| 0U142090 | ADAPTER FOR SPEC NUT | 1 | |
| 0U142091 | ADAPTER FOR SPEC NUT | 1 | |
| 109-3401-70-115 | ROTOR BRAKE ADAPTER RING NUT REMOVE/INSTALL TOOLS | 1 | |
| 109-3501-09-1 | ADAPTER,NOSE/MAIN LG SHOCK STRUT UPPER RING NUT REMOVAL/INSTL | 1 | |
| 10C1010G01 | TORQUE ADAPTER, INSTALL AND REMOVE - NO. 3 BEARING LOCK NUT, | 1 | |
| 10C1090G01 | ADAPTER, TORQUE - HPT ROTOR TO COMPRESSOR ROTOR NUTS (TORQUE ADAPTER) | 1 | |
| 10C1105 | ADAPTER, TORQUE, CPLG NUT | 1 | |
| 10C1105G02 | ADAPTER, TORQUE, COUPLING NUT - FAN MAINTENANCE UNIT TO FAN MID SHAFT (TORQUE ADAPTER) | 1 | |
| 11001 | WING BOLT NUT TORQUE ADAPTER LOWER FWD | 12 | |
| 110705-1 | ADAPTER WRENCH - AFT CONE BOLT NUT - CFM56-3 ENGINE | 1 | |
| 11C3053 | ADAPTER - TORQUE-INSTALL/REMOVE NO 3 BEARING LOCKNUT | 1 | |
| 11C3129 | ADAPTER - TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR - SHAFT NUT | 1 | |
| 11C3129G03 | ADAPTER, TORQUE FAN SHAFT EXTERNAL NUT AND SENSOR, SHAFT NUT | 1 | |
| 11C3144 | ADAPTER - TORQUE - SPANNER NUT - INNER RACE NO 4 BEARING | 1 | |
| 11C3204 | ADAPTER - TORQUE LOCKNUT - NO 1 BRG | 1 | |
| 11C4583 | ADAPTER WRENCH NO 2 BEARING MID NUT | 1 | |
| 11C4583G04 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 11C4655 | ADAPTER TO LIFT LPT NUT TORQUE TUBE | 1 | |
| 11C4823G01 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | 1 | |
| 1507M32P28 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 18C1569 | ADAPTER, TORQUE - LOCKNUT, PMA | 1 | |
| 19MIT65B01211-1 | TORQUE ADAPTER - NUT, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
| 1C6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| 1C6364 REV J | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| 1C6364G02 | TORQUE ADAPTER, FORWARD ADAPTER, COUPLING NUT | 1 | |
| 1C6364G03 | Torque Adapter, FWD Adapter Coupling Nut | 1 | |
| 1C8077 | WRENCH ADAPTER 5 BRG NUT | 1 | |
| 1C9626G01 | Torque Adapter, Pressure Tube/Coupling Nut-Hpt Rotor | 1 | |
| 20MIT65B01211-1 | ADAPTER WRENCH - NUT, UPPER SHOCK STRUT, WING LANDING GEAR | 1 | |
| 21-50665 | NLG AXLE NUT ADAPTER | 1 | |
| 23006782 | ADAPTER-TORQUE, TURBINE ATTACH NUT, LOWER | 2 | |
| 23006783 | ADAPTER, TORQUE TURBINE ATTACH UPPER NUT | 2 | |
| 23053588 | Adapter – Lift, Dummy Nut Compressor Aft | 1 | |
| 23083893 | ADAPTER: TORQUE,B-NUT | 1 | |
| 247C5079 | ADAPTER - NUT - TORQUE - NO. 6 | 1 | |
| 247C5111 | TORQUE ADAPTER-COUPLING NUT | 1 | |
| 269T9211-005 | Wrench Adapter Spanner, Lower Pulley FWD Nut | 2 | |
| 269T9211-5 | WRENCH ADAPTER SPANNER, LOWER PULLEY FWD NUT | 1 | |
| 27-1-3567A | ADAPTER TORQUE MAIN WHEEL AXEL NUT | 4 | |
| 28-0-1380 | Torque Adapter- Nose Wheel Axle Nuts | 5 | |
| 28-0-1380E | ADAPTER NOSE WHEEL AXLE NUT TORQUE | 6 | |
| 28-0-1380F | ADAPTER TORQUE NOSE AXEL NUT | 4 | |
| 28-0-1381 | F100 ADAPTER MAIN WHL NUT | 3 | |
| 28-0-1381C | MAIN WHEEL AXLE NUT ADAPTER | 3 | |
| 28-0-1381D | F100 ADAPTER MAIN WHL NUT | 1 | |
| 28-0-3180F | ADAPTER, NLG AXLE NUT | 1 | |
| 28-0-5255 | F100 ADAPTER LOCKNUT | 1 | |
| 294896-1 | TORQUE WRENCH ADAPTER (TO TORQUE 3822056-1 NUT ON 38220752 MAIN SHAFT) | 1 | |
| 298104-1 | ADAPTER ASSY,TORQUE WRENCH,LPC NUT | 1 | |
| 2C14040 | TORQUE ADAPTER, PRESSURE TUBE-COUPLING NUT, HP TURB ROTOR | 1 | |
| 2C14040G07 | TORQUE ADAPTER, PRESSURE TUBE- COUPLING NUT HPT ROTOR | 2 | |
| 2C14040G08 | TORQUE ADAPTER, PRESSURE TUBE- COUPLING NUT HPT ROTOR | 1 | |
| 2C14664 | TORQUE ADAPTER SET - RET NUT | 1 | |
| 2C14664G01 | TORQUE ADAPTER SET, RETAINER NUT -NO. 5R BEARING INNER RACE | 4 | |
| 2C14738 | ADAPTER, R/I - STAGE 1 FAN DISK NUTS | 1 | |
| 2C14738G01 | ADAPTER SET, INSTALL/REMOVE ‐STAGE 1 FAN DISK NUTS | 2 | |
| 2C14856 | ADAPTER SET, SPANNER - AIRTUBE NUTS | 1 | |
| 2C14856G01 | SPANNER ADAPTER SET, AIRTUBE NUTS | 6 | |
| 2C14856P04 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P05 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P06 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P07 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P08 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P09 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P12 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P13 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C14856P14 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C5241 | ADAPTER FAN SHAFT LOCKNUT | 1 | |
| 2C5241G01 | ADAPTER, FAN SHAFT LOCKNUT TORQUE | 1 | |
| 2C6048 | PULLER, ADAPTER - AFT AIR SEAL & SPLIT NUT SPANNER | 2 | |
| 2C6048G03 | SPLIT NUT RETAINER PULLER ADAPTER | 1 | |
| 2C6084 | ADAPTER, TORQUE - RETAINING NUT, BRG 5 | 1 | |
| 2C6084G03 | ADAPTER, TORQUE - RET NUT, BRG 5 | 1 | |
| 2C6173 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | 1 | |
| 2C6352P03 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P07 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P09 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 3 | |
| 2C6352P13 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P15 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P18 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P21 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P22 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P23 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P25 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6352P30 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| 2C6943G02 | WRENCH,SPLINE ADAPTER NUT,ASSEM HPC | 1 | |
| 2C6I73 | ADAPTER, TORQUE, SEAL NUT - COMPR REAR SHAFT | 1 | |
| 2C81046G01 | ADAPTER, LPT-TO-FAN DRIVE SHAFT LOCKNUT TORQUE (LOCKNUT WRENCH) | 2 | |
| 2C81050G01 | ADAPTER, TORQUE-LOCKNUT, NO. 5 BEARING INNER RACE | 3 | |
| 2C81103 ADA | ADAPTER - TORQUE - LOCKNUT - FAN TO FAN DRIVESHAFT | 1 | |
| 2C81407 | HPT, LOCKNUT-TORQUE ADAPTER | 1 | |
| 2C81407G02 | (FUTURE PROCUREMENT P/N: 2C81407G03) ADAPTER, TORQUE – HPT LOCKNUT | 1 | |
| 2C81407G03 | ADAPTER, TORQUE – HPT LOCKNUT | 1 | |
| 2C81407G04 | ADAPTER, HPT LOCKNUT TORQUE | 1 | |
| 2C81434G02 | ADAPTER, HPT LOCKNUT TORQUE | 1 | |
| 2C81458G01 | ADAPTER TORQUE BAL HPTR NUTS | 1 | |
| 2C81463G01 | ADAPTER, TORQUE - HPT LOCKNUT (TORQUE ADAPTER) | 1 | |
| 2C81463G02 | ADAPTER, TORQUE - HPT LOCKNUT | 1 | |
| 2C81464 | ADAPTER TORQUE - HPT LOCKNUT | 1 | |
| 2C81464G01 | ADAPTER, TORQUE - HPT LOCKNUT | 1 | |
| 2C81505 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81505G01 | ADAPTER, TORQUE - NO.1 BEARING LOCKNUT | 1 | |
| 2C81625P01 | ADAPTER-TORQUE, LOCKNUT, (TORQ | 1 | |
| 2C81665G01 | ADAPTER, TORQUE, LOCKNUT, AXIS | 1 | |
| 2C81666G01 | ADAPTER, TORQUE, LOCKNUT AXIS | 1 | |
| 2C81667G01 | ADAPTER, TORQUE, LOCKNUT, AIR/ | 1 | |
| 2C91076G01 | ADAPTER, TORQUE-LOCKNUT, LPT ROTOR | 1 | |
| 2C91102G01 | ADAPTER, HPT ROTOR LOCKNUT SPANNER WRENCH | 1 | |
| 2C91125G01 | ADAPTER-SPANNER LOCKNUT | 1 | |
| 2C91169G01 | ADAPTER-TORQUE LOCKNUT | 1 | |
| 2C91183G01 | ADAPTER-TORQUE LPT NUT | 1 | |
| 2C91217G01 | ADAPTER-TORQUE-LOCKNUT | 1 | |
| 2C91323G01 | ADAPTER - #1 BEARING - LOCKNUT | 1 | |
| 2C91349G01 | ADAPTER, HPT LOCKNUT TORQUE | 1 | |
| 2MIT65B01201 | WRENCH ADAPTER GLAND NUT WLG & BLG | 11 | |
| 2MIT65B01202 | WRENCH ADAPTER - GLAND NUT, NOSE GEAR | 8 | |
| 2MIT65B01202-1 | Wrench adapter-gland nut，nose gear | 1 | |
| 2MIT65B01203 | TORQUE ADAPTER - RETAINER NUT, BODY LANDING GEAR TRUNNION | 2 | |
| 2MIT65B81276-1 | TORQUE WRENCH ADAPTER - NUT, BEARING RETAINER, ALTERNATE EXTENSION DRIVE, NOSE GEAR | 1 | |
| 32025-1 | WRENCH ADAPTER AXLE NUT NLG | 1 | |
| 35-92000-0101 | ADAPTER NUT | 1 | |
| 35-92000-0201 | CLAMP NUT ADAPTER | 1 | |
| 369D29826 | 4 BLADE TAIL ROTOR NUT #369D21716-5 TORQUE WRENCH ADAPTER | 1 | |
| 3916731-507 | ANTI-SKID RETAINER NUT ADAPTER | 3 | |
| 3981305-1 | Adapter - MLG Axle Nut | 4 | |
| 4715492 | STAIRWAY CYL NUT TORQUE ADAPTER | 1 | |
| 4916706 | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
| 460004586 | Torque Adapter − NLG Ring Nut | 1 | |
| 460006201 | F100 ADAPTER TURNING NUT | 2 | |
| 460007011 | MLG NUT ADAPTER, A340 A/C | 27 | |
| 460007230 | ADAPTER-TORQUE,MLG WHEEL NUT | 28 | |
| 4309901280 | ADAPTER-NLG AXLE TRANSMISSION SPNUT | 1 | |
| 4916706 REV P | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
| 4916706-515 | MLG AXLE NUT TORQUE ADAPTER | 5 | |
| 4916706-519 | ADAPTER MLG AXLE NUT TORQUE | 3 | |
| 4916706-521 | Adapter-torque，main landing gear axle nut | 1 | |
| 4916706-527 | Adapter Torque MLG Axle Nut | 5 | |
| 4916706-529 | ADAPTER-TORQUE，MAIN LANDING GEAR AXLE NUT | 5 | |
| 4916706-531 | Adapter-torque，main landing gear axle nut | 2 | |
| 4916745-501 | Adapter-torque，main gear door cylinder jam nut | 8 | |
| 4916762-1 | JAM NUT TORQUE ADAPTER | 1 | |
| 4916776-501 | ADAPTER N/G RESTRICTOR SUPPORT NUT | 9 | |
| 4916779-1 | JAN NUT TORQUE ADAPTER | 4 | |
| 4916795-507 | MLG FIXED SIDE STRUT NUT TORQUE ADAPTER | 1 | |
| 4916795-509 | ADAPTER - STRUT NUT | 4 | |
| 4916799-501 | ADAPTER SLAT CYL JAMNUT | 2 | |
| 4936855-1 | N/G DRAG LINK HINGE NUT ADAPTER | 3 | |
| 49I6706 | ADAPTER - TORQUE MLG AXLE NUT | 1 | |
| 50-590013 | WING BOLT NUT TORQUE ADAPTER | 1 | |
| 50-590013 / | WING BOLT NUT TORQUE ADAPTER | 1 | |
| 50-590013-1 | WING BOLT NUT TORQUE ADAPTER | 1 | |
| 50-590014 | LOWER FORWARD WING NUT TORQUEWRENCH ADAPTER (5/8 INCH HEX) | 1 | |
| 5MIT65B01231-1 | CROWFOOT WRENCH - ADAPTER, RETAINER NUT, BODY LANDING GEAR | 1 | |
| 6429932-1 | ADE Nut Adapter 1 | 1 | |
| 65B01202-1 | WHEEL RETAINING NUT ADAPTER | 1 | |
| 6795637 | ADAPTER, GP REAR BEARING NUT | 2 | |
| 6796395 | HOLDING ADAPTER THRUST NUT | 1 | |
| 533222121 | ADAPTER - AXLE NUT NLG | 1 | |
| 537220251 | Anti Torque Adapter LPT Nut, 537220251LHT Dwg No.(537220251) | 1 | |
| 6MIT65B01201-1 | WRENCH ADAPTER - NUT, LOWER DRAG BRACE, WING LANDING GEAR | 3 | |
| 6MIT65B01231-1 | TORQUE ADAPTER - BEARING RETAINER NUT, BODY LANDING GEAR | 4 | |
| 6MIT65B82591 | TORQUE ADAPTER - BARREL NUT, NOSE GEAR STEERING ACTUATOR | 2 | |
| 70030AT1 | SLEEVE NUT TORQUE WRENCH ADAPTER | 1 | |
| 734-93370 | Stop Nut Adapter (2IT) | 1 | |
| 78129T3 | SLEEVE NUT TORQUE WRENCH ADAPTER | 1 | |
| 856A-1336-G02 | Adapter Set, 3/8" MEC Nuts | 20 | |
| 856A1000 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 2 | |
| 856A1000 G04 | Torque Adapter, I/R - No. 3 Brg Locking Nut | 1 | |
| 856A1000 G06 | Torque Adapter, I/R - No. 3 Brg Locking Nut | 1 | |
| 856A1000G01 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G02 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G03 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 3 | |
| 856A1000G04 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G05 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G06 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G07 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 1 | |
| 856A1000G08 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 4 | |
| 856A1000G09 | TORQUE ADAPTER, INSTALLATION & REMOVAL - NO. 3 BEARING LOCKING NUT | 6 | |
| 856A1006 | ADAPTER TORQUE-COMPR. STATOR NUTS | 1 | |
| 856A1006 REV F | ADAPTER TORQUE-COMPR. STATOR NUTS | 1 | |
| 856A1006G01 | Wrench, Torque Adapter - Compressor Stator Nuts (torque adapter) | 11 | |
| 856A1089 | Adapter- HPTR To Compressor Rotor Nuts | 1 | |
| 856A1089G03 | ADAPTER - HPT ROTOR TO COMPR ROTOR NUTS | 6 | |
| 856A1089G04 | ADAPTER - HPT ROTOR TO COMPR ROTOR NUTS | 6 | |
| 856A1336G02 | ADAPTER SET HMU NUT TORQUE | 20 | |
| 856A1612 | ADAPTER SET, SPANNER AIRTUBE NUTS ( 5 WRENCH SET) | 2 | |
| 856A1612 REV D | ADAPTER SET, SPANNER AIRTUBE NUTS ( 5 WRENCH SET) | 1 | |
| 856A1827G01 | Set-Adapter, Torque Hydromechanical UN&MN Fuel Pump Nuts | 19 | |
| 856A1827G01 | SET - ADAPTER, TORQUE HYDROMECHANICAL UN & MN FUEL PUMP NUTS | 19 | |
| 856A2820G01 | LOOSENING ADAPTER - LPT COUPLING NUT | 2 | |
| 856A2992 | LOOSENING ADAPTER-LPT COUPLING NUT | 1 | |
| 856A2992G01 | ADAPTER TO TIGHTEN NUT | 4 | |
| 856A3466 | COUNTERTORQUE ADAPTER - TGB STALOK NUTS | 1 | |
| 856A3466G01 | COUNTERTORQUE ADAPTER - TGB STALOK NUTS | 6 | |
| 856A3501G04 | LOOSENING ADAPTER - LPT COUPLING NUT | 14 | |
| 856A4095 | ADAPTER KIT. INSTALL / REMOVE SWAGED NUTS - CDP SEAL | 1 | |
| 856AI006 | ADAPTER TORQUE-COMPR. STATOR NUTS | 1 | |
| 8C2539 | ADAPTER, TORQUE FAN SHAFT EXTENSION NUT AND SENSOR, SHAFT NUT | 1 | |
| 8C2547 | ADAPTER WRENCH ADVANCE - NO. 2 BEARING MID NUT | 1 | |
| 8C2550 | ADAPTER, TORQUE - NO. 2 OUTER LOCKNUT | 1 | |
| 8C3538 | ADAPTER - WRENCH - TGBX - LOCKNUT - HORIZONTAL | 1 | |
| 8C3628 | ADAPTER - WRENCH - IGBX - NUT - HORIZONTAL | 1 | |
| 8MIT65B01221-4 | ADAPTER WRENCH - NUT, RESTRICTOR TUBE, NOSE LANDING GEAR | 1 | |
| 8MIT65B01231-1 | TORQUE ADAPTER - INNER CYLINDER NUT, BODY LANDING GEAR | 1 | |
| 907248-1-1 | ADAPTER WRENCH NUT ASSEMBLY | 1 | |
| 907250-1-1 | ADAPTER WRENCH NUT ASSEMBLY | 1 | |
| 9142702600 | WRENCH ADAPTER - RING NUT | 1 | |
| 92-92000-0101 | ADAPTER NUT | 1 | |
| 92-92000-0203 | ADAPTER NUT | 1 | |
| 9441M51 | ADAPTER, SPLINE TORQUE NUT | 1 | |
| 9441M51 REV B | ADAPTER, SPLINE TORQUE NUT | 1 | |
| 95-92000-0101 | ADAPTER NUT NLG | 1 | |
| 95-92000-0201 | ADAPTER NUT | 1 | |
| 95-92000-0203 | ADAPTER NUT MLG | 1 | |
| 956A1056 | ADAPTER - TORQUE - NO. 4 SPANNER NUT | 1 | |
| 956A3056 | ADAPTER - TORQUE - NO 4 SPANNER NUT | 1 | |
| 956A3250 | ADAPTER - TORQUE - HPT FLANGE NUT | 1 | |
| 956A7644P56 | R/H ADAPTER LOCK NUT | 1 | |
| 98AMS172322005 | Wrench Adapter Nut MS172322 | 9 | |
| 98AMS172322005 | WRENCH ADAPTER, NUT MS172322 | 9 | |
| 98AMS172323 | HOOK WRENCH ADAPTER MS172323 NUTS (BER) | 1 | |
| 98AMS172323002 | HOOK WRENCH ADAPTER MS172323 NUTS (BER) | 9 | |
| 98AMS172329 | HOOK WRENCH ADAPTER MS172329 NUTS | 1 | |
| 98AMS172329002 | HOOK WRENCH ADAPTER MS172329 NUTS | 8 | |
| 98AMS172333 | HOOK WRENCH ADAPTER MS172333 NUTS | 1 | |
| 98AMS172333002 | HOOK WRENCH ADAPTER MS172333 NUTS | 13 | |
| 98AMS172344 | HOOK WRENCH ADAPTER MS172344 NUTS | 1 | |
| 98AMS172344002 | HOOK WRENCH ADAPTER MS172344 NUTS | 9 | |
| 98D27504035000 | ADAPTER-TORQUE-TRUNNION NUT | 20 | |
| 98D32104010000 | SPECIAL NUT ADAPTER | 25 | |
| 98D32303000200 | ADAPTER-WRENCH NUT MS172331 | 3 | |
| 98D32303000201 | ADAPTER-WRENCH NUT MS172321 | 9 | |
| 98D32303000202 | ADAPTER-WRENCH NUT MS172333 | 2 | |
| 98D32403001000 | ADAPTER BRAKE UNIT NUTadapter - brake unit nut | 19 | |
| 98D32403005001 | ADAPTER- BRAKE NUT UNIT | 23 | |
| 98S71005000000 | Q.E.C FOR TURNING ADAPTER NUTS | 12 | |
| 9C2115G02 | ADVANCE WRENCH ADAPTER - FAN SHAFT EXTENSION NUT | 1 | |
| 9C2122G03 | TORQUING/LOOSENING WRENCH ADAPTER - NUT SEAL ROTATING AIR | 1 | |
| A320-251 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 19 | |
| A32001-1 | WRENCH ADAPTER GLAND NUT MLG B767-200/300 | 1 | |
| A32004 | WRENCH ADAPTER GLAND NUT MLG | 1 | |
| A32004-1 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 12 | |
| A32004-4 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 1 | |
| A32004-5 | WRENCH ADAPTER - GLAND NUT, MAIN LANDING GEAR (MLG) | 2 | |
| A32021 | WRENCH ADAPTER GLAND NUT NLG | 1 | |
| A32021-1 | WRENCH ADAPTER - GLAND NUT, NOSE LANDING GEAR | 7 | |
| A32025-1 | WRENCH ADAPTER - WHEEL RETAINING AXLE NUT, NOSE LANDING GEAR | 19 | |
| A32034 | WRENCH ADAPTER STEERING NUT NLG | 1 | |
| A32034-1 | WRENCH ADAPTER - STEERING NUT, NOSE LANDING GEAR (NLG) | 8 | |
| A32045-19 | NLG NUT WRENCH ADAPTER | 15 | |
| A32069 | WRENCH ADAPTER RETAINER NUT ANTI SKID TRANSDUCER | 1 | |
| A32069-1 | WRENCH ADAPTER - RETAINER NUT, ANTISKID TRANSDUCER | 1 | |
| A32069-7 | WRENCH ADAPTER - RETAINER NUT, ANTISKID TRANSDUCER | 20 | |
| A32070 | TORQUE ADAPTER SNUBBER NUT | 1 | |
| A32070-1 | TORQUE ADAPTER - SNUBBER NUT | 1 | |
| A32078-1 | ADAPTER SET - RETAINING NUT, ACTUATOR SIDE AND DRAG BRACE, MAIN LANDING GEAR (MLG) | 1 | |
| A32101 | WRENCH ADAPTER AXLE NUT NLG | 1 | |
| A32101-1 | WRENCH ADAPTER - AXLE NUT, NOSE LANDING GEAR | 27 | |
| A32101-2 | WRENCH ADAPTER NUT-NLG- | 7 | |
| AB27001-VU2 | ADAPTER-TORQUE-TRUNNION NUT | 1 | |
| ADA9758 | MLG AXLE NUT ADAPTER | 1 | |
| ADP-00331 | Torque adapter, tie bolt nut | 1 | |
| ADP-00389 | ROTOR NUT TORQUE ADAPTER | 1 | |
| AGE15011 | TORQUE ADAPTER, BALANCE NUT | 5 | |
| AGE70546 | ROTOR NUT TORQUE ADAPTER | 1 | |
| AP-BEE530-3 | WING BOLT TOOLS - NUT TORQUE ADAPTER | 1 | |
| AT57495 | TORQUE ADAPTER FOR GLAND NUT | 4 | |
| AW-H46828 | NLG WHEEL AXLE NUT ADAPTER | 1 | |
| AW-M46750 | MLG WHEEL AXLE NUT ADAPTER | 1 | |
| BAWA-6 | EMB 170-175 MLG AXLE NUT ADAPTER 3" - 6 POINT. DRIVE 3/4" | 1 | |
| C32013 | TORQUE WRENCH ADAPTER AFT BRG RTNR NUT MLG TRUN | 1 | |
| C32013-1 | Torque Wrench Adapter - Aft Bearing Retainer Nut, Main Landing Gear Trunnion | 16 | |
| C32013-15 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 8 | |
| C32013-16 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32013-9 | TORQUE WRENCH ADAPTER - AFT BEARING RETAINER NUT, MAIN LANDING GEAR TRUNNION | 4 | |
| C32062-1 | WRENCH ADAPTER –GLAND NUT, SOCKET STRUT MLG | 4 | |
| C47648 | NLG TORQUE LINK NUT ADAPTER | 18 | |
| C47943 | ADAPTER FWD L/G PIN NUT | 5 | |
| C71001 | WRENCH ADAPTER-AFT CONEBOLT NUT | 8 | |
| C71001-1 | WRENCH ADAPTER-AFT CONEBOLT NUT | 10 | |
| C71014-1 | Adapter Wrench - Aft Cone Bolt Nut | 18 | |
| C71014-3 | ADAPTER WRENCH – AFT CONE BOLT NUT | 14 | |
| CAT4559−1B | Torque Adapter − NLG Ring Nut | 1 | |
| CS-295-RC160 | ADAPTER NUT | 1 | |
| D85034484 | AXLE NUT WRENCH ADAPTER | 1 | |
| DAPT61-0015-00 | ADAPTER PROP NUTS | 8 | |
| DAPT61-0030-00 | TORQUE ADAPTER 11/16" X 1/2" PROPELLER NUTS MOUNTING | 1 | |
| DZZ7060-1 | DRAG LINK NUT ADAPTER | 1 | |
| DZZ7077-1-392 | ADAPTER-MLG RETRACT CYLINDER NUT TOR | 1 | |
| DZZ7148-1 | N/L/G UNLOCK CYL NUT T/Q ADAPTER | 1 | |
| DZZ7150-1 | HYD CYL GLAND NUT TORQUE ADAPTER | 1 | |
| DZZ7151-1 | Adapter-adg snubber nut torque | 1 | |
| DZZ7154-1 | MD11 MLG AXLE NUT TORQUE ADAPTER | 7 | |
| DZZ7158-1 | N/L/G TORQUE LINK NUT ADAPTER | 3 | |
| DZZ7159-1 | Adapter-mlg torque link upper and lowek nut | 4 | |
| DZZ7160-1 | Adapter-MLG torque link apex nut | 3 | |
| DZZ7162-1 | NLG AXLE NUT TORQUE ADAPTER | 5 | |
| DZZ7163-1 | N/L/G DRAG LINK CTR NUT TQ ADAPTER | 2 | |
| DZZ7164-1 | CTR L/G DRAG LINK NUT TQ ADAPTER | 2 | |
| DZZ7202-1 | CTR L/G TORQUE LINK NUT ADAPTER | 1 | |
| DZZ7210-1 | ADAPTER – CLG ORIFICE SUPPORT TUBE LOWER NUT | 1 | |
| F46173 | AXLE NUT ADAPTER | 1 | |
| F46176 | ADAPTER FOR RETAINER NUT OF RETRACTION STRUT (MLG) | 1 | |
| F46253-1000 | ADAPTER FOR SHOCK ABSORBER ATTACHING NUT ON BARREL (MLG) | 1 | |
| F70255 | WRENCH ADAPTER -0 HOUSING NUT, ACTUATOR THIS | 1 | |
| F70256 | WRENCH ADAPTER -0 LOCKNUT, ACTUATOR USED TO | 1 | |
| F70306 | TORQUE ADAPTER -0 SKID DETECTOR NUT, MLG TO | 1 | |
| F70306-1 | Torque adapter skid detector nut main landing gear | 4 | |
| F72767 TO | MLG GLAND NUT TORQUE ADAPTER | 1 | |
| F72915 | TORQUE WRENCH ADAPTER ASSY -0 CLAMSHELL JAM NUT. | 1 | |
| F72915-1 | Torque wrench adapter assy-clamshell jam nut | 2 | |
| F72955 | ADAPTER -0 TORQUE WRENCH, LG TRUNNION NUT TO | 1 | |
| F80013-1 | ADAPTER PIN SPANNER GLAND NUT | 14 | |
| F80020 | WRENCH-ADAPTER 737 MLG TRUNNION PIN NUT | 1 | |
| F80020-5 | Adapter Wrench, MLG Trunnion Nut | 16 | |
| F80033-8 | Adapter wrench MLG Strut Nut 5.5 | 22 | |
| F80176-1 | TORQUE WRENCH ADAPTER MLG TRUNNION AFT BEARING NUTX | 5 | |
| F80176-8 | Torque Wrench Adapter -Main Landing Gear Trunnion. Aft Bearing Nut | 16 | |
| F80176-8, | Torque Wrench Adapter - Main Landing Gear Trunnion, Aft Bearing Nut - 737-100 thru -500 L/N311 | 16 | |
| F80254 | ENGINE AFT CONE BOLT NUT ADAPTER - BOEING | 1 | |
| F80257 | ENGINE AFT CONE BOLT NUT ADAPTER | 1 | |
| G-4376L | Torque Adapter, Rod End Nut | 1 | |
| G32011 | WRENCH ADAPTER -0 OVERSIZE GLAND NUT, WING, AND | 1 | |
| G32011-1 | WRENCH ADAPTER - OVERSIZE GLAND NUT, WING AND BODY GEAR | 6 | |
| G601R242302-1 | ADG NUT ADAPTER | 8 | |
| G601R321102-1 | WRENCH ADAPTER - MLG PINTLE PIN NUT | 6 | |
| G601R321102−1 | Wrench Adapter − MLG Pintle Pin Nut | 6 | |
| GS19820-1 | ADAPTER PITCHLOCK NUT | 2 | |
| GS19822-1 | ADAPTER BETA NUT TORQUE | 2 | |
| GS20841-1 | BETA NUT TORQUE ADAPTER | 1 | |
| GS23004-1 | BETA NUT TORQUE ADAPTER | 1 | |
| GS23608 | TIE ROD NUT ADAPTER TOOL | 1 | |
| GS23608-1 | TIE ROD NUT ADAPTER TOOL | 1 | |
| GS26802-1 | Torque Adapter, Balance Nut | 2 | |
| H 46750 | ADAPTER MLG WHEEL AXLE NUT | 3 | |
| H 46828 | ADAPTER NLG WHEEL AXLE NUT | 19 | |
| H46750 | ADAPTER MLG WHEEL AXLE NUT | 3 | |
| H46750-001 | ADAPTER MLG WHEEL AXLE NUT | 3 | |
| H46828 | ADAPTER NLG WHL AXLE NUT | 19 | |
| H46828-ST | NLG WHEEL AXLE NUT ADAPTER | 1 | |
| H46831 | ADAPTER R/I NLG SH ABS NUT | 11 | |
| H46838 | ADAPTER NLG WHL AXLE NUT | 14 | |
| H46838 | ADAPTER MLG AXLE NUT ART42 | 14 | |
| H47324 | ADAPTER FOR NUT | 1 | |
| H47682 | WHEEL NUT ADAPTER | 43 | |
| H604-5-TA | NUT TOOL ADAPTER | 1 | |
| HMO7227300-505 | NUT ADAPTER | 1 | |
| HS7633 | ADAPTER WRENCH NLG GLAND NUT | 5 | |
| J32031-12 | MLG WHEEL RETENTION NUT ADAPTER | 22 | |
| J32032 | ADAPTER ASSEMBLY WRENCH - L.G. WHEEL RETAINING NUT | 4 | |
| J32032-19 | Wheel Retention Nut Adapter Socket - MLG | 9 | |
| J32032-22 | ADAPTER ASSEMBLY WRENCH - L.G. WHEEL RETAINING NUT | 23 | |
| J32032-23 | MLG WHEEL RETENTION NUT ADAPTER | 11 | |
| J47549 | ADAPTER, AXLE NUT | 42 | |
| K32022-1 | Wheel Retention Nut Adapter Socket - NLG | 18 | |
| K32032 | WRENCH ADAPTER STEERING NUT NLG | 1 | |
| K32032-1 | NLG Steering Nut Wrench Adapter | 10 | |
| LTCT1394-01 | ADAPTER NUT | 1 | |
| M46292 | ADAPTER - BRAKE UNIT NUT | 28 | |
| M46292S | TORQUE ADAPTER, BRAKE UNIT NUT A320 | 1 | |
| M46750 | MLG AXLE NUT ADAPTER | 20 | |
| M47157-100 | ADAPTER AXLE NUT NLG | 19 | |
| M4G750 | ADAPTER - MLG WHEEL AXLE NUT | 1 | |
| MH46750-MLG WHEEL AXLE NUT ADA | MLG WHEEL AXLE NUT ADAPTER | 1 | |
| MHCPDN-3 | DRIVE NUT ADAPTER | 1 | |
| MHPDN-02 | NOSE ADAPTER (HOLDS NUT) | 1 | |
| MIT65B01201 | WRENCH ADAPTER - GLAND NUT, WING AND BODY GEAR | 7 | |
| MIT65B01202-1 | ADAPTER ASSEMBLY WRENCH - LANDING GEAR WHEEL RETAINING NUT | 11 | |
| MIT65B05398-4-1-INC | ADAPTER NUT, LESS SOME | 1 | |
| MIT65B13164 | ADAPTER - WRENCH, BEARING NUT, MAIN ENTRY DOOR | 6 | |
| MIT65B15171 | TORQUE ADAPTER - VARIABLE CAMBER FLAPS HINGE NUT | 3 | |
| MIT65BO120 | ADAPTER - WRENCH, MLG STRUT GLAND NUT | 1 | |
| MRPDN-02A | NOSE ADAPTER (HOLDS NUT) | 1 | |
| MT548-1 | ENGINE HOIST ADAPTER (INCLUDES FITTING, BOLT, WASHERS, AND NUTS) | 1 | |
| PWA 115223 | PMA ROTOR RETAINING NUT TORQUE ADAPTER | 1 | |
| PWA 85653 | ADAPTER BRG 1 NUT RMVL/INSTL | 1 | |
| PWA25026 | ADAPTER-WRENCH TURBINE SHAFT NUT | 2 | |
| PWA25414 | ADAPTER - HPC FRONT BAL BRG SLEEVE NUT_[PWA25414] | 2 | |
| PWA25444 | ADAPTER - T/S/COUPLING OUTER RACE NUT_[PWA25444] | 2 | |
| PWA29989 | ADAPTER-R I TURBINE SHAFT NUT | 1 | |
| PWA45246 | ENG FCU REM/INST NUT TQ ADAPTER WR | 7 | |
| PWA75511 | ADAPTER-R I TURBINE SHAFT NUT | 1 | |
| PWA81055 | ADAPTER TORQUE OIL DUCT RETAINING NUT | 1 | |
| PWA85117 | HPT COUPLING NUT WRENCH ADAPTER | 1 | |
| PWA86058 | ADAPTER TORQUE HPC 6TH STAGE TIEROD NUTS | 1 | |
| PWA86603 | ADAPTER-HOLDING PMA RETAINING NUT | 2 | |
| PWA87086 | ADAPTER, CALIBRATION, HPC, 11 STG TIEROD NUT TORQUE | 1 | |
| PWA87153 | ADAPTER, CALIBRATION, HPC, 9 STG TIEROD NUT TORQUE | 1 | |
| PWA88629 | ADAPTER,HOLDER-PMA RETAINING NUT | 1 | |
| PWC31033 | ADAPTER, LPC RETAINING NUT (JT15D-1 SERIES, POST-SB7135 JT15D-4) | 1 | |
| PWC31254 | ADAPTER NUT | 1 | |
| PWC31327 | COLLAR ADAPTER, HP TURBINE SHAFT NUT | 1 | |
| PWC37147 | Adapter, L.P Nut (Pre SB) | 4 | |
| PWC38149 | Adapter, Anti-rotation, LP Impeller Retaining Nut (Post-SB20546) | 1 | |
| PWC38557 | Adapter, No 11 Bearing Retaining Nut Anti-rotation | 1 | |
| PWC43262 | ADAPTER - FAN NUT | 3 | |
| PWC48118 | TORQUE ADAPTER-NUT | 2 | |
| PWC50055 | ADAPTER NUT | 5 | |
| PWC52147 | ADAPTER NUT | 1 | |
| PWC57326 | ADAPTER, NUT | 1 | |
| PWC57331 | ADAPTER, NUT | 1 | |
| PWC64051 | ADAPTER PLUS QTY 1 EACH NUT, WASHER & T-BOLT | 5 | |
| PWC85894 | ADAPTER - NUT, SQUIRREL CAGE | 1 | |
| Q46012 | ADAPTER FOR NUT | 2 | |
| Q46100 | ADAPTER - NLG TORQUE LINK CENTER PIN NUT - R/I | 10 | |
| Q47334 | ADAPTER-AXLE-NUT | 10 | |
| R46014 | NLG AXLE NUT ADAPTER | 28 | |
| RB23006782 | Adapter, Torque Turbine Attach Lower Nut | 2 | |
| RB23006783 | Adapter, Torque Turbine Attach Upper Nut | 3 | |
| RBD29826 | 4 Blade Tail Rotor Nut #369D21716-5 Torque Wrench Adapter | 3 | |
| RBT18570 | Reaction Adapter Mast Nut | 1 | |
| RBW109-3401- 70-115 | ROTOR BRAKE ADAPTER RING NUT REMOVE/INSTALL TOOLS | 2 | |
| RBW109-3401-70-115 | Rotor Brake Adapter Ring Nut Remove/Install Tools | 2 | |
| ROCAGE15011 | TORQUE ADAPTER, BALANCE NUT | 1 | |
| SPL-10357 | TORQUE WRENCH ADAPTER STOP NUT - WLG | 1 | |
| SPL-11076 | AFT BEARING NUT TORQUE WRENCH ADAPTER, MAIN LANDING GEAR | 1 | |
| SRES22 | TORQUE ADAPTER 11/16" X 1/2" PROPELLER NUTS MOUNTING | 3 | |
| ST2580-263 | TORQUE WRENCH ADAPTER - WALKING BEAM ASSEMBLY - NUT SPACER | 8 | |
| ST2580-267 | STANDARD TOOL - SPANNER WRENCH ADAPTER FOR BACN10RF NUTS | 13 | |
| ST2580-267-06 | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-267-24-3-7 | SPANNER WRENCH ADAPTER-BACN10RF24 NUT | 2 | |
| ST2580-267-24-4-7 | STANDARD TOOL-SPANNER WRENCH ADAPTER FOR BACN10RF-NUTS | 1 | |
| ST2580-267-XX | WRENCH - SPANNER, ADAPTER FOR BACN10RF NUTS. | 1 | |
| ST2580-267-XX-X-X | SPANNER WRENCH ADAPTER FOR BACN10RF NUTS. (ST2580-267 DRAWING) | 1 | |
| ST2580-337 | TORQUE WRENCH ADAPTER - FOR 15/16-INCH HEX NUT | 2 | |
| T-236165 | NUT REMOVING ADAPTER | 1 | |
| T-71023 | Torque Adapter - Barrel gland nut | 1 | |
| T-71038 | Torque Adapter - Barrel gland nut | 1 | |
| T48334 | ADAPTER-NLG WHL AXLE NUT | 1 | |
| T72340183P01 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| T72340183P02 | TORQUE ADAPTER SET,SPANNER AIR TUBE NUT | 1 | |
| TL5600 | PROP NUT TORQUE ADAPTER | 2 | |
| TS 1176-10 | LOWER AFT WING NUT TORQUEWRENCH ADAPTER (FOR INTERNAL/EXTERNAL WRENCHING NUT) | 1 | |
| TS-1171-1 | WING BOLT NUT TORQUE ADAPTER | 1 | |
| TS1171 | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 2 | |
| TS1171 (SN# L20843, TOOL CODE # D928) | TRIM TAB CABLE STOP TOOL NOTE A 3/8 INCH DRIVE SOCKET CAN BE MODIFIED TO ENGAGE THE SLOTS ON THE TRIM TAB CABLE STOP CASTELLATED NUT. THE MODIFIED SOCKET CAN BE USED AS A TORQUE ADAPTER INSTEAD OF THIS TOOL. (BEECHCRAFT CORP) | 1 | |
| TS1171-1 | UPPER AFT WING NUT TORQUEWRENCH ADAPTER | 1 | |
| TS1171-10 | WING BOLT NUT TORQUE ADAPTER 15/16" EXT. WRENCH | 1 | |
| TS1171-2 | WING BOLT NUT TORQUE ADAPTER 7/8" INT. WRENCH | 1 | |
| TS1171-6 | WING BOLT NUT TORQUE ADAPTER 13/16" EXT. WRENCH | 1 | |
| TS1171-8 | WING BOLT NUT TORQUE ADAPTER 3/4" EXT. WRENCH | 1 | |
| TS1176-1 | WING BOLT NUT TORQUE ADAPTER | 1 | |
| TS1176-10 | WING BOLT NUT TORQUE ADAPTER 15/16" EXT. WRENCH | 1 | |
| TS1176-11 | WING BOLT NUT TORQUE ADAPTER 3/4" EXT. WRENCH | 2 | |
| TS1176-2 | WING BOLT NUT TORQUE ADAPTER 7/8" INT. WRENCH | 2 | |
| TS1176-6 | WING BOLT NUT TORQUE ADAPTER 13/16" EXT. WRENCH | 2 | |
| TS1176-7 | WING BOLT NUT TORQUE ADAPTER 25/32" EXT. WRENCH | 1 | |
| TS1176-8 | WING BOLT NUT TORQUE ADAPTER 3/4" EXT. WRENCH | 1 | |
| TS1176/D917 | WING BOLT TOOLS - NUT TORQUE ADAPTER | 1 | |
| TS1222-2 | WING BOLT NUT TORQUE ADAPTER 7/8" INT. WRENCH | 1 | |
| WASATN-B005 | ADAPTER,WRNCHSTEERACTU.TRUNNUT | 1 | |
| lC6364 | TORQUE ADAPTER - FWD ADAPTER, COUPLING NUT | 1 | |
| H46831 | NLG BARREL NUT R/I ADAPTER | 11 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
