| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| A21008-14 | ADAPTER END | 1 | |
| A21008-15 | ADAPTER END | 1 |
Partial Match
| Part Number | Description | Sources Available | Tool Request Qty |
|---|---|---|---|
| 10 XHBU-SS | ADAPTER - PRESSURE (5/8-INCH FLARELESS FITTING AT ONE END AND 5/8-INCH | 5 | |
| 10HXBU-SS | ADAPTER PRESSURE 5/8- INCH FLARELESS FITTING AT ONE END 5/8- INCH 37- DEGREE FLARED FITTING AT THE OTHER END | 1 | |
| 10XHBU-SS | ADAPTER - PRESSURE (5/8-INCH FLARELESS FITTING AT ONE END AND 5/8-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 5 | |
| 1198-505 | ROD END TORQUE WRENCH ADAPTER | 1 | |
| 12XHBU-SS | ADAPTER - PRESSURE (3/4-INCH FLARELESS FITTING AT ONE END AND 3/4-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 4 | |
| 50874 | ADAPTER - PROBE PITOT STATIC (FOR PROBES WITH BOTH EXTENDED AND NON-EXTENDED STRUTS) | 1 | |
| 478510 | Henkel 982644 LOCTITE 14 x 18 NPT Thread to Cartridge End Fischbach Cartridge Adapter | 1 | |
| 508747 | ADAPTER - PROBE PITOT STATIC (FOR PROBES WITH BOTH EXTENDED AND NON-EXTENDED STRUTS) | 2 | |
| 2002205 | Oxygen Charge Adapter. JIC/AN-4 " Male Flared Tube" connected by 3" bendable tube with AN800-3 Aircraft Connection. | 1 | |
| 2002755 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 3" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002756 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 8" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002758 | Oxygen Charge Adapter Combo- 2500 PSI Max- 1/4 Male NPT Inlet connection- Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 2002764 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 3" bendable tube with AN800-3 Aircraft Connection. | 1 | |
| 2002766 | Oxygen Charge Adapter. 1/4 MNPT (male pipe thread) connected by 1" bendable tube with AN800-3 Aircraft Connection. | 1 | |
| 2003315 | Oxygen Charge Adapter Combo- 2500 PSI Max - 1/4 Male NPT Inlet connection- 9/16-18UNF male inlet connected by 1" bendable tube with AN800-3 (3/8-24) aircraft connection, separating threads outlet connection. | 1 | |
| 312-11 | Skyscraper 31211 Extendable Handle Adapter | 1 | |
| 31530-2 | END-END ADAPTER CABLE | 2 | |
| 4-10XHU6-SS MS33514 | ADAPTER - PRESSURE (7/8-INCH FITTING AT ONE END AND AIR SHOP FITTING AT THE OTHER END) | 1 | |
| 4-8XHU6-SS MS33514 | ADAPTER - PRESSURE (3/4-INCH FITTING AT ONE END AND AIR SHOP FITTING AT THE OTHER END) | 1 | |
| 4916765-501 | L/G CONTROL VALVE END PLUG ADAPTER | 1 | |
| 508747 (SUP. 53949) | ADAPTER - PROBE PITOT STATIC (FOR PROBES WITH BOTH EXTENDED AND NON-EXTENDED STRUTS) (PART# 508747, SUP. 53949) | 1 | |
| 5MS06-12000 | ROD END TORQUE ADAPTER | 1 | |
| 6796899 | ADAPTER – PRESS, COMPRESSOR ROTOR 1ST STAGE END | 1 | |
| 6796900 | ADAPTER – PRESS, COMPRESSOR ROTOR 14TH STAGE END | 1 | |
| 6877025 | SEAL RING ADAPTER FIXTURE VALVE END | 1 | |
| 23052504 | Adapter – Lift & Support, Gas Rotor Aft End | 1 | |
| 50181040 | WRENCH TORQUE STEEL SINGLE END 14X18MM; M END DRIVE W/SQUARE LOCATION FOR ADAPTER; NSN 5120123699145 | 1 | |
| 6MIT65B01503 | ADAPTER - TORQUE WRENCH, ROD END, NOSE LANDING GEAR STEERING ACTUATOR | 3 | |
| 7200TC15157-1 | Detail End Adapter | 1 | |
| 730N/40 | WRENCH TORQUE STEEL SINGLE END 14X18MM; M END DRIVE W/SQUARE LOCATION FOR ADAPTER; NSN 5120123699145 | 2 | |
| 833108-1 | ADAPTER END PLAY | 1 | |
| 833109-1 | ADAPTER END PLAY | 1 | |
| 8C2134 | FIXTURE, ADAPTER - GENSPECT (AFT END DOWN) | 1 | |
| 8C2135 | ADAPTER, GENSPEC HPCR (FWD END DOWN) | 1 | |
| 8XHBU-SS | ADAPTER - FITTING (1/2-INCH FLARELESS FITTING AT ONE END AND 1/2-INCH 37-DEGREE FLARED FITTING AT THE OTHER END) | 4 | |
| 90-60 | ADAPTER-OBJECTIVE FOR ENDOSCOPE | 1 | |
| 956A8674G02 | ADAPTER, DRAIN - OIL SYSTEM RECOMMENDED 2 | 1 | |
| 9R3754-TA | EXTEND PORT ADAPTER | 1 | |
| A-77.02.1 | ROTATING PROBE ADAPTER (CONNECTOR OF 4 PIN FISHER - 1 END MALE, 1 END FEMALE) | 1 | |
| A27127-24 | End adapter | 1 | |
| A28014-1 | PHASE CHECKING EQPT - PUMP, GROUND FAULT INTERRUPTER (USE BREAKOUT BOX A28014-2 AND ADAPTER CABLE ASSY A28014-3 WHICH ARE THE SUB-END ITEMS OF A28014-1) | 7 | |
| A32067-14 | END/MID ADAPTER PLATE | 1 | |
| A32101-1 | WRENCH ADAPTER END | 27 | |
| A32101-1-M | WRENCH ADAPTER END | 1 | |
| A51300 | TOOL-PUMP END ADAPTER TO INFLATE/DEFLATE VALVE | 1 | |
| AES-RA | ADAPTER STANDARD ELOTEST ROTARY TO RECHII RA PROBE END | 1 | |
| AGEâ?00065â?403 | NOSE LENDING GEAR HOISTING ADAPTER | 6 | |
| C0M10946 | ADAPTER PRESSURE 5/8- INCH FLARELESS FITTING AT ONE END 5/8- INCH 37- DEGREE FLARED FITTING AT THE OTHER END | 1 | |
| C29006-25 | Tube End Adapter | 1 | |
| C32032-21 | HYDARULIC END ADAPTER | 1 | |
| CCM150I | WRENCH,TORQUE;?M;30.0 INCH-POUNDS MIN AND 150.0 INCH-POUNDS MAX;AUDIBLE AND FEEL IMPULSE;SINGLE END EXTERNAL DOVETAIL; STEEL;?M END DRIVE,W/SQUARE LOCATION FOR ADAPTER,TORQUE WRENCH;|9.000";2.00 INCH-POUNDS;PLAIN HEAD;RUBBER GRIP HANDLE; CH | 1 | |
| CHA141377 | END FLOAT CHECKING ADAPTER | 4 | |
| CHA700-228 | BADLASH END FLOAT CHECKING ADAPTER | 1 | |
| CHA711-173 | END FLOAT CHECKING ADAPTER | 1 | |
| CHA715-128 | END FLOAT CHECKING ADAPTER | 1 | |
| CHA716-134 | END FLOAT CHECKING ADAPTER | 1 | |
| CS-710-207 | OPEN -END WRENCH ADAPTER | 1 | |
| CS710-169 | OPEN END WRENCH ADAPTER 19 MM | 1 | |
| CSA74703HT-4-4 | ADAPTER - PROBE PITOT STATIC (FOR PROBES WITH BOTH EXTENDED AND NON-EXTENDED STRUTS) | 2 | |
| DB75-108 | DB75-108, ADAPTER - STARTER DRAIN, ENGINE, 13-01, PRENDERGAST | 3 | |
| DRCADPH10-76/9100 | ADAPTER TO MATE DC MILITARY HEADSET H10-76 TO DC 9100 WIRELESS SYSTEM. ONE END 4 CONDUCTOR U-94 JACK/SWITCH. ONE END JAE CLA CONDUCTOR CONNECTOR | 1 | |
| G-4376L | Torque Adapter, Rod End Nut | 1 | |
| G32060-1 | Torque adapter-rod end，body landing gear，hydraulic actuator | 2 | |
| GFATIE | ADAPTER SOCKET 3/8" FEMALE END X 1/4" MALE END BLACK | 1 | |
| GSB2840008B | SET - HARNESS ADAPTER Q100, 200, 300, METRIC, EXTENDED RANGE | 1 | |
| GSB2840008D | SET - HARNESS ADAPTER Q100, 200, 300, IMPERIAL, EXTENDED RANGE | 1 | |
| HPX421B | DETECTOR KIT CRYSTAL WITH FRONT END ADAPTER PN: 8817A OR EQUIVALENT | 1 | |
| HU28707 | End-drive adapter | 1 | |
| J25011-1 | ADAPTER EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL / INSTALLATION | 2 | |
| J25011-64 | ADAPTER EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE, REMOVAL / INSTALLATION | 3 | |
| J25011-68 | ADAPTER EQUIPMENT - OVERHEAD FLIGHT ATTENDANT REST (OFAR) / OVERHEAD FLIGHT CREW REST (OFCR) MODULE REMOVAL / INSTALLATION | 4 | |
| K25002 | Adapter Equipment -Overhead Flight Attendant Rest | 1 | |
| MIT65B05124 | TORQUE ADAPTER - END CAP, LOWER TRIPOD PIN NOSE LANDING GEAR | 1 | |
| MS27404-3D | EXPENDABLE MATERIAL/ADAPTER-SPLINE CAVITY | 2 | |
| MultiRAE PGM-6228 | multigas monitor for PID 10.6eV lamp 0.1-5000ppm, LEL, & O2, non-wireless, Extended - duration Li-ion rechargeable battery with alkaline adapter," | 1 | |
| NB485100 | EXTENDED INFLATION ADAPTER | 2 | |
| NGC-IND-ETH-E2E-KIT | NGC-IND-ETH-E2E-KIT;Certifier Adapter Kit for Industrial Ethernet End-to-End testing | 1 | |
| NSA8159-015E | ROD END TEST ADAPTER | 1 | |
| NTGPC-002 | END ADAPTER - TYRE PRESS. GAUGE | 1 | |
| PSS44600M2-3-4-4 | ADAPTER - PROBE PITOT STATIC (FOR PROBES WITH BOTH EXTENDED AND NON-EXTENDED STRUTS) | 6 | |
| PWA211759 | ADAPTER STOP END | 1 | |
| Q46090 | TIGHTENING ADAPTER FOR END FITTING ASSEMBLY | 1 | |
| QJXBM19A | 19MM BOXEND ADAPTER W/OFFSET | 1 | |
| SRES22 | ADAPTER,TORQUE WRENCH;SINGLE END 0.688";SINGLE END 0.500";SINGLE END INTERNAL SPLINE;SINGLE END INTERNAL SQUARE; STEEL;BOX END;|3.000";12;NO. 22 SPLINE SIZE; CHROMIUM; | 3 | |
| T-1100 | BAC EXTENDER ADAPTER, FOR UNIVERSAL TOW BARS | 3 | |
| T1100 | ADAPTER: EXTENDER, 2 EA REQD | 3 | |
| T34-01L | ADAPTER: EXTENDED RING HITCH, TO MAKE TR34 10FT TOWBAR | 2 | |
| T34-02L | ADAPTER: EXTENDED BALL TONGUE, TO MAKE TR34 10FT TOWBAR | 2 | |
| T840 | ADAPTER: EXTENDER,UNIV, | 2 | |
| TN182 | ADAPTER: EXTENDER, CESSNA WHEEL PANTS,2 EA REQD | 2 | |
| MF-50-B | ADAPTER UNIVERSAL 1/2" FEMALE END X 1/2" MALE END | 1 | |
| CHA141377 | CHECKING ADAPTER,END FLOAT | 4 |
Aviapool (Aviation Tool Pooling LLC) is a global company providing around the clock assistance for the planning, supply, and sourcing of tooling equipment to the commercial aviation marketplace.
We are making available to our customers a comprehensive one-stop solution in ensuring the right tooling equipment reaches you on time for your planned input needs. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget.
We take your tooling requests, and source the items on your behalf. Just submit your items, and we do the rest.
